bad hub?

bad hub?

[James]

I have a USB wifi adapter that is having problems so I thought I'd get a 
powered hub.
The wifi adapter works directly in my Raspberry Pi 4 but not in the hub.
The device appears to be there but I can't use it.
I don't understand the labelling of ports.
Does the error mean one of the ports on my hub is bad?


[ 2034.225213] usb 2-1: new SuperSpeed Gen 1 USB device number 8 using 
xhci_hcd
[ 2034.252133] usb 2-1: New USB device found, idVendor=05e3, 
idProduct=0612, bcdDevice=92.24
[ 2034.260336] usb 2-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[ 2034.267487] usb 2-1: Product: USB3.0 Hub
[ 2034.271439] usb 2-1: Manufacturer: GenesysLogic
[ 2034.277570] hub 2-1:1.0: USB hub found
[ 2034.281697] hub 2-1:1.0: 4 ports detected
[ 2034.388914] usb 1-1.1: new high-speed USB device number 6 using xhci_hcd
[ 2034.502787] usb 1-1.1: New USB device found, idVendor=05e3, 
idProduct=0610, bcdDevice=92.24
[ 2034.511202] usb 1-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[ 2034.518568] usb 1-1.1: Product: USB2.0 Hub
[ 2034.522704] usb 1-1.1: Manufacturer: GenesysLogic
[ 2034.529002] hub 1-1.1:1.0: USB hub found
[ 2034.533716] hub 1-1.1:1.0: 4 ports detected

[ 2035.646132] usb 1-1.1-port2: Cannot enable. Maybe the USB cable is bad?

[ 2040.309270] usb 2-1.1: new SuperSpeed Gen 1 USB device number 9 using 
xhci_hcd
[ 2040.334867] usb 2-1.1: New USB device found, idVendor=0e8d, 
idProduct=7612, bcdDevice= 1.00
[ 2040.343265] usb 2-1.1: New USB device strings: Mfr=2, Product=3, 
SerialNumber=4
[ 2040.350601] usb 2-1.1: Product: Wireless
[ 2040.354621] usb 2-1.1: Manufacturer: MediaTek Inc.
[ 2040.359419] usb 2-1.1: SerialNumber: 000000000
[ 2040.445815] usb 2-1.1: reset SuperSpeed Gen 1 USB device number 9 
using xhci_hcd
[ 2040.475214] mt76x2u 2-1.1:1.0: ASIC revision: 76120044
[ 2040.514953] mt76x2u 2-1.1:1.0: ROM patch build: 20141115060606a
[ 2040.688338] mt76x2u 2-1.1:1.0: Firmware Version: 0.0.00
[ 2040.693587] mt76x2u 2-1.1:1.0: Build: 1
[ 2040.697431] mt76x2u 2-1.1:1.0: Build Time: 201507311614____
[ 2041.512649] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'

I many removed the hub and reinserted it.
I don't know why
usb 2-2: Product: USB 10/100/1000 LAN
is affected, it is my TPLink USB adapter in the other USB (maybe I 
jiggled it).

# dmesg
[ 2907.250244] usb 1-1.1: USB disconnect, device number 6
[ 2907.811665] usb 2-1: USB disconnect, device number 8
[ 2907.816721] usb 2-1.1: USB disconnect, device number 9
[ 2930.688013] usb 2-2: USB disconnect, device number 7
[ 2930.693580] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due 
to incorrect slot or ep state.
[ 2931.304203] usb 2-2: new SuperSpeed Gen 1 USB device number 10 using 
xhci_hcd
[ 2931.328883] usb 2-2: New USB device found, idVendor=2357, 
idProduct=0601, bcdDevice=30.00
[ 2931.337086] usb 2-2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=6
[ 2931.344235] usb 2-2: Product: USB 10/100/1000 LAN
[ 2931.348948] usb 2-2: Manufacturer: TP-LINK
[ 2931.353052] usb 2-2: SerialNumber: 000001000000
[ 2931.488606] usb 2-2: reset SuperSpeed Gen 1 USB device number 10 
using xhci_hcd
[ 2931.549045] r8152 2-2:1.0 eth1: v1.10.11
[ 2934.584899] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2934.591844] r8152 2-2:1.0 eth1: carrier on
[ 2935.552429] usb 2-1: new SuperSpeed Gen 1 USB device number 11 using 
xhci_hcd
[ 2935.581347] usb 2-1: New USB device found, idVendor=05e3, 
idProduct=0612, bcdDevice=92.24
[ 2935.589595] usb 2-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[ 2935.596750] usb 2-1: Product: USB3.0 Hub
[ 2935.600692] usb 2-1: Manufacturer: GenesysLogic
[ 2935.607169] hub 2-1:1.0: USB hub found
[ 2935.611316] hub 2-1:1.0: 4 ports detected
[ 2935.664095] usb 1-1.1: new high-speed USB device number 9 using xhci_hcd
[ 2935.788117] usb 1-1.1: New USB device found, idVendor=05e3, 
idProduct=0610, bcdDevice=92.24
[ 2935.796546] usb 1-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[ 2935.803932] usb 1-1.1: Product: USB2.0 Hub
[ 2935.808077] usb 1-1.1: Manufacturer: GenesysLogic
[ 2935.814959] hub 1-1.1:1.0: USB hub found
[ 2935.819274] hub 1-1.1:1.0: 4 ports detected
[ 2935.912368] usb 2-1.1: new SuperSpeed Gen 1 USB device number 12 
using xhci_hcd
[ 2935.937437] usb 2-1.1: New USB device found, idVendor=0e8d, 
idProduct=7612, bcdDevice= 1.00
[ 2935.945844] usb 2-1.1: New USB device strings: Mfr=2, Product=3, 
SerialNumber=4
[ 2935.953189] usb 2-1.1: Product: Wireless
[ 2935.957225] usb 2-1.1: Manufacturer: MediaTek Inc.
[ 2935.962057] usb 2-1.1: SerialNumber: 000000000
[ 2936.048805] usb 2-1.1: reset SuperSpeed Gen 1 USB device number 12 
using xhci_hcd
[ 2936.077910] mt76x2u 2-1.1:1.0: ASIC revision: 76120044
[ 2936.109762] mt76x2u 2-1.1:1.0: ROM patch build: 20141115060606a
[ 2936.248963] mt76x2u 2-1.1:1.0: Firmware Version: 0.0.00
[ 2936.254239] mt76x2u 2-1.1:1.0: Build: 1
[ 2936.258091] mt76x2u 2-1.1:1.0: Build Time: 201507311614____
[ 2936.966265] usb 1-1.1-port2: Cannot enable. Maybe the USB cable is bad?
[ 2937.067763] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'