* Re: [Bisected] 3.7-rc1 can't resume
@ 2013-02-18 15:54 Jonas Heinrich
2013-02-18 16:21 ` H. Peter Anvin
0 siblings, 1 reply; 30+ messages in thread
From: Jonas Heinrich @ 2013-02-18 15:54 UTC (permalink / raw)
To: hpa, len.brown, pavel, tglx, mingo, x86, rjw; +Cc: linux-kernel, linux-pm
[-- Attachment #1.1: Type: text/plain, Size: 1099 bytes --]
On 02-17 21:40, Rafael J. Wysocki wrote:
> Does the commit immediately preceding this one behave correctly?
Strangely the preceding commit works well, so I bisected the kernel
again, this time more carefully and I've got a different result!
(see bisect_log attachement).
It seems to be commit 73201dbec64aebf6b0dca855b523f437972dc7bb
(https://patchwork.kernel.org/patch/1511921/).
Someone on LKML already reported an issue with this commit
(https://lkml.org/lkml/2012/10/18/228) , but Peter
Anvins patch got already applied in newer versions.
Reverting this patch with the recent git clone seems to be difficult
because it already has too much dependencies.
Additionally I've included dmesg dumps of the last good and the bad
kernel version.
On 02-17 12:52, H. Peter Anvin wrote:
> T43 is quite old... which might have exposed unique bugs. How reliable is the failure? Even one misidentified commit results in git bisect giving garbage.
It affects really all versions after that commit and the failure happens
every time I try to resume my notebook.
Best regards,
Jonas
[-- Attachment #1.2: bisect_log_new --]
[-- Type: text/plain, Size: 3131 bytes --]
git bisect start
# good: [49b8c695e331c9685e6ffdbf34872509d77c8459] Merge branch 'x86/fpu' into x86/smap
git bisect good 49b8c695e331c9685e6ffdbf34872509d77c8459
# good: [49b8c695e331c9685e6ffdbf34872509d77c8459] Merge branch 'x86/fpu' into x86/smap
git bisect good 49b8c695e331c9685e6ffdbf34872509d77c8459
# bad: [a20acf99f75e49271381d65db097c9763060a1e8] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
git bisect bad a20acf99f75e49271381d65db097c9763060a1e8
# good: [06d2fe153b9b35e57221e35831a26918f462db68] Merge tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
git bisect good 06d2fe153b9b35e57221e35831a26918f462db68
# good: [3498d13b8090c0b0ef911409fbc503a7c4cca6ef] Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
git bisect good 3498d13b8090c0b0ef911409fbc503a7c4cca6ef
# bad: [61464c8357c8f6b780e4c44f5c79471799c51ca7] Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
git bisect bad 61464c8357c8f6b780e4c44f5c79471799c51ca7
# good: [cc150a2861e744d8f574d571762cc7e9f928abb3] Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
git bisect good cc150a2861e744d8f574d571762cc7e9f928abb3
# good: [60e59920152c7bafc8a2eb3031a62f22c2bc9e95] Merge branch 'board' of git://github.com/hzhuang1/linux into next/cleanup
git bisect good 60e59920152c7bafc8a2eb3031a62f22c2bc9e95
# bad: [797b9e5ae93270ec27a1f1ed48cd697d01b2269f] Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
git bisect bad 797b9e5ae93270ec27a1f1ed48cd697d01b2269f
# good: [71953fc6e4ce5ac05b594d8e5866accf531aa969] cifs: remove kmap lock and rsize limit
git bisect good 71953fc6e4ce5ac05b594d8e5866accf531aa969
# good: [c052e2b423f3eabe9f3f32e60744afa5cf26f6b9] cifs: obtain file access during backup intent lookup (resend)
git bisect good c052e2b423f3eabe9f3f32e60744afa5cf26f6b9
# good: [cdeb9b014331af4282be522824e36f3aa33f0671] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
git bisect good cdeb9b014331af4282be522824e36f3aa33f0671
# good: [a57d985e378ca69f430b85852e4187db3698a89e] Merge tag 'please-pull-ia64-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
git bisect good a57d985e378ca69f430b85852e4187db3698a89e
# bad: [b2cc2a074de75671bbed5e2dda67a9252ef353ea] x86, smep, smap: Make the switching functions one-way
git bisect bad b2cc2a074de75671bbed5e2dda67a9252ef353ea
# good: [5a5a51db78ef24aa61a4cb2ae36f07f6fa37356d] x86-32: Start out eflags and cr4 clean
git bisect good 5a5a51db78ef24aa61a4cb2ae36f07f6fa37356d
# bad: [73201dbec64aebf6b0dca855b523f437972dc7bb] x86, suspend: On wakeup always initialize cr4 and EFER
git bisect bad 73201dbec64aebf6b0dca855b523f437972dc7bb
# bad: [73201dbec64aebf6b0dca855b523f437972dc7bb] x86, suspend: On wakeup always initialize cr4 and EFER
git bisect bad 73201dbec64aebf6b0dca855b523f437972dc7bb
# bad: [73201dbec64aebf6b0dca855b523f437972dc7bb] x86, suspend: On wakeup always initialize cr4 and EFER
git bisect bad 73201dbec64aebf6b0dca855b523f437972dc7bb
[-- Attachment #1.3: dmesg_bad_kernel --]
[-- Type: text/plain, Size: 54971 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.0-36-bisect (root@playground_32) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Feb 18 15:13:28 UTC 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f6e0000-0x000000005f6f4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005f6f5000-0x000000005f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI present.
[ 0.000000] DMI: IBM 1871F1G/1871F1G, BIOS 70ET69WW (1.29 ) 05/29/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5f6e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a68000-0x37d2bfff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3753a000-0x377fd537]
[ 0.000000] Move RAMDISK from [mem 0x37a68000-0x37d2b537] to [mem 0x3753a000-0x377fd537]
[ 0.000000] ACPI: RSDP 000f6b90 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 5f6e71d4 00064 (v01 DELL M09 00001290 LTP 00000000)
[ 0.000000] ACPI: FACP 5f6e7300 000F4 (v03 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120711/tbfadt-567)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120711/tbfadt-598)
[ 0.000000] ACPI: DSDT 5f6e74e7 0D7A8 (v01 DELL M09 00001290 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5f6f6000 00040
[ 0.000000] ACPI: SSDT 5f6e74b4 00033 (v01 DELL M09 00001290 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 5f6f4c8f 00052 (v01 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI: TCPA 5f6f4ce1 00032 (v01 DELL M09 00001290 PTL 00000001)
[ 0.000000] ACPI: APIC 5f6f4d13 0005A (v01 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI: MCFG 5f6f4d6d 0003E (v01 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI: SLIC 5f6f4dab 00176 (v01 DELL M09 00001290 ASL 00000061)
[ 0.000000] ACPI: BOOT 5f6f4fd8 00028 (v01 DELL M09 00001290 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 638MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x5f6dffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5f6dffff]
[ 0.000000] On node 0 totalpages: 390767
[ 0.000000] free_area_init_node: node 0, pgdat c1574a40, node_mem_map f6949200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1278 pages used for memmap
[ 0.000000] HighMem zone: 162276 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6933000 s32320 r0 d20928 u53248
[ 0.000000] pcpu-alloc: s32320 r0 d20928 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387713
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-bisect root=UUID=89b7a62a-2ab6-4c47-8158-67f559a5bd97 ro init=/bin/systemd resume=/dev/sda1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3126912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005f6e0)
[ 0.000000] Memory: 1536908k/1563520k available (4028k kernel code, 26160k reserved, 1615k data, 548k init, 654216k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1583000 - 0xc160c000 ( 548 kB)
.data : 0xc13ef036 - 0xc1583000 (1615 kB)
.text : 0xc1000000 - 0xc13ef036 (4028 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.150 MHz processor
[ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.47 BogoMIPS (lpj=6207166)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.003389] Security Framework initialized
[ 0.003405] AppArmor: AppArmor disabled by boot time parameter
[ 0.003432] Mount-cache hash table entries: 512
[ 0.003720] Initializing cgroup subsys cpuacct
[ 0.003728] Initializing cgroup subsys memory
[ 0.003742] Initializing cgroup subsys devices
[ 0.003748] Initializing cgroup subsys freezer
[ 0.003754] Initializing cgroup subsys net_cls
[ 0.003760] Initializing cgroup subsys blkio
[ 0.003795] Disabled fast string operations
[ 0.003806] mce: CPU supports 5 MCE banks
[ 0.003820] CPU0: Thermal monitoring enabled (TM2)
[ 0.003838] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift is 0x6
[ 0.003926] SMP alternatives: switching to UP code
[ 0.010133] Freeing SMP alternatives: 16k freed
[ 0.010144] ACPI: Core revision 20120711
[ 0.020010] ftrace: allocating 17441 entries in 35 pages
[ 0.030066] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.030522] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065143] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[ 0.066662] Performance Events: p6 PMU driver.
[ 0.066662] ... version: 0
[ 0.066662] ... bit width: 32
[ 0.066662] ... generic registers: 2
[ 0.066662] ... value mask: 00000000ffffffff
[ 0.066662] ... max period: 000000007fffffff
[ 0.066662] ... fixed-purpose events: 0
[ 0.066662] ... event mask: 0000000000000003
[ 0.090472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090515] Brought up 1 CPUs
[ 0.090521] smpboot: Total of 1 processors activated (3725.47 BogoMIPS)
[ 0.091883] devtmpfs: initialized
[ 0.092169] PM: Registering ACPI NVS region [mem 0x5f6f5000-0x5f6fffff] (45056 bytes)
[ 0.093408] RTC time: 15:19:57, date: 02/18/13
[ 0.093470] NET: Registered protocol family 16
[ 0.093688] ACPI: bus type pci registered
[ 0.093776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.093788] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.093794] PCI: Using MMCONFIG for extended config space
[ 0.093800] PCI: Using configuration type 1 for base access
[ 0.094519] bio: create slab <bio-0> at 0
[ 0.094596] ACPI: Added _OSI(Module Device)
[ 0.094603] ACPI: Added _OSI(Processor Device)
[ 0.094608] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.094614] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.096571] ACPI: EC: EC description table is found, configuring boot EC
[ 0.107911] ACPI: Interpreter enabled
[ 0.107922] ACPI: (supports S0 S3 S4 S5)
[ 0.107946] ACPI: Using IOAPIC for interrupt routing
[ 0.110690] ACPI: Power Resource [PUBS] (on)
[ 0.113929] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.117164] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.117175] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.117209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.117245] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.117249] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.117252] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.117255] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.117259] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.117262] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.117265] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.117268] PCI: root bus 00: using default resources
[ 0.117311] PCI host bridge to bus 0000:00
[ 0.117320] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.117323] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.117330] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.117337] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.117354] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.117401] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.117412] pci 0000:00:02.0: reg 10: [mem 0x90080000-0x900fffff]
[ 0.117418] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.117425] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff pref]
[ 0.117431] pci 0000:00:02.0: reg 1c: [mem 0x90000000-0x9003ffff]
[ 0.117465] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.117474] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
[ 0.117567] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.117669] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.117705] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
[ 0.117807] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.117843] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.117895] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.117938] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.117989] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.118032] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.118083] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.118126] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.118177] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.118230] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.118254] pci 0000:00:1d.7: reg 10: [mem 0x90040000-0x900403ff]
[ 0.118354] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.118380] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.118469] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.118487] pci 0000:00:1e.2: reg 10: [io 0x1c00-0x1cff]
[ 0.118500] pci 0000:00:1e.2: reg 14: [io 0x18c0-0x18ff]
[ 0.118512] pci 0000:00:1e.2: reg 18: [mem 0x90040800-0x900409ff]
[ 0.118524] pci 0000:00:1e.2: reg 1c: [mem 0x90040400-0x900404ff]
[ 0.118586] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.118613] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.118721] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.118730] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.118743] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.118753] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[ 0.118763] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15e0-15ef
[ 0.118795] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.118813] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.118825] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.118837] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.118849] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.118861] pci 0000:00:1f.2: reg 20: [io 0x1810-0x181f]
[ 0.118915] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.118936] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.119004] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.119107] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.119140] pci 0000:02:00.0: [14e4:167d] type 00 class 0x020000
[ 0.119170] pci 0000:02:00.0: reg 10: [mem 0x90100000-0x9010ffff 64bit]
[ 0.119332] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.119357] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.119379] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.119391] pci 0000:00:1c.0: bridge window [mem 0x90100000-0x901fffff]
[ 0.119451] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.119456] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.119465] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.119470] pci 0000:00:1c.2: bridge window [mem 0x90200000-0x902fffff]
[ 0.119479] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.119510] pci_bus 0000:04: busn_res: [bus 04-07] is inserted under [bus 00-ff]
[ 0.119528] pci 0000:04:00.0: [104c:ac56] type 02 class 0x060700
[ 0.119554] pci 0000:04:00.0: reg 10: [mem 0x90300000-0x90300fff]
[ 0.119600] pci 0000:04:00.0: supports D1 D2
[ 0.119603] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119635] pci 0000:04:02.0: [8086:1043] type 00 class 0x028000
[ 0.119660] pci 0000:04:02.0: reg 10: [mem 0x90301000-0x90301fff]
[ 0.119845] pci 0000:00:1e.0: PCI bridge to [bus 04-07] (subtractive decode)
[ 0.119855] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff]
[ 0.119861] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x9fffffff]
[ 0.119869] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.119872] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.119875] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.119925] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under [bus 04-07] (conflicts with (null) [bus 04-07])
[ 0.119932] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 06
[ 0.119935] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 04-07]
[ 0.119960] pci_bus 0000:00: on NUMA node 0
[ 0.119964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.120070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.120112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.120157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.120244] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.120254] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.123912] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124008] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124102] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124195] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124288] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124381] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124474] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124567] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124670] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.124685] vgaarb: loaded
[ 0.124689] vgaarb: bridge control possible 0000:00:02.0
[ 0.124744] PCI: Using ACPI for IRQ routing
[ 0.134584] PCI: pci_cache_line_size set to 64 bytes
[ 0.134658] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.134660] e820: reserve RAM buffer [mem 0x5f6e0000-0x5fffffff]
[ 0.134791] NetLabel: Initializing
[ 0.134796] NetLabel: domain hash size = 128
[ 0.134801] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.134822] NetLabel: unlabeled traffic allowed by default
[ 0.134985] hpet clockevent registered
[ 0.134989] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.135000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.135010] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.146675] Switching to clocksource hpet
[ 0.155078] pnp: PnP ACPI init
[ 0.155121] ACPI: bus type pnp registered
[ 0.155658] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.155662] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.155665] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.155668] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.155670] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.155673] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.155676] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.155679] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.155682] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.155685] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.155688] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.155690] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.155693] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.155696] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.155699] pnp 00:00: [mem 0x00100000-0x5fffffff]
[ 0.155702] pnp 00:00: [mem 0xfec00000-0xffffffff]
[ 0.155784] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.155794] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.155802] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.155810] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.155818] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.155826] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.155834] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.155842] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.155851] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.155859] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.155867] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.155875] system 00:00: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.155883] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.155894] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155925] pnp 00:01: [bus 00-ff]
[ 0.155929] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.155932] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.155935] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.155938] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.155941] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.155944] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.155947] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.155950] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.155953] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.155956] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.155959] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.155962] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.155964] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.155967] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.155970] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.155973] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.155976] pnp 00:01: [mem 0x60000000-0xfebfffff window]
[ 0.156040] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.156063] pnp 00:02: [io 0x0010-0x001f]
[ 0.156066] pnp 00:02: [io 0x0090-0x009f]
[ 0.156069] pnp 00:02: [io 0x0024-0x0025]
[ 0.156071] pnp 00:02: [io 0x0028-0x0029]
[ 0.156074] pnp 00:02: [io 0x002c-0x002d]
[ 0.156077] pnp 00:02: [io 0x0030-0x0031]
[ 0.156079] pnp 00:02: [io 0x0034-0x0035]
[ 0.156082] pnp 00:02: [io 0x0038-0x0039]
[ 0.156085] pnp 00:02: [io 0x003c-0x003d]
[ 0.156087] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.156090] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.156093] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.156095] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.156098] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.156100] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.156103] pnp 00:02: [io 0x0050-0x0053]
[ 0.156106] pnp 00:02: [io 0x0072-0x0077]
[ 0.156108] pnp 00:02: [io 0x002e-0x002f]
[ 0.156111] pnp 00:02: [io 0x1000-0x107f]
[ 0.156114] pnp 00:02: [io 0x1180-0x11bf]
[ 0.156117] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.156119] pnp 00:02: [io 0x1600-0x1641]
[ 0.156122] pnp 00:02: [io 0x1644-0x167f]
[ 0.156125] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.156128] pnp 00:02: [mem 0xf0008000-0xf000bfff]
[ 0.156130] pnp 00:02: [mem 0xfed14000-0xfed17fff]
[ 0.156133] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.156136] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.156215] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.156223] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.156231] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.156238] system 00:02: [io 0x1600-0x1641] has been reserved
[ 0.156246] system 00:02: [io 0x1644-0x167f] has been reserved
[ 0.156254] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.156262] system 00:02: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.156270] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.156278] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.156286] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.156295] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.156311] pnp 00:03: [io 0x0000-0x000f]
[ 0.156314] pnp 00:03: [io 0x0080-0x008f]
[ 0.156317] pnp 00:03: [io 0x00c0-0x00df]
[ 0.156324] pnp 00:03: [dma 4]
[ 0.156356] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.156369] pnp 00:04: [io 0x0061]
[ 0.156401] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.156412] pnp 00:05: [io 0x00f0]
[ 0.156429] pnp 00:05: [irq 13]
[ 0.156463] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.156474] pnp 00:06: [io 0x0070-0x0071]
[ 0.156481] pnp 00:06: [irq 8]
[ 0.156519] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.156530] pnp 00:07: [io 0x0060]
[ 0.156533] pnp 00:07: [io 0x0064]
[ 0.156540] pnp 00:07: [irq 1]
[ 0.156573] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.156587] pnp 00:08: [irq 12]
[ 0.156622] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.156784] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.156900] pnp 00:0a: [io 0x03bc-0x03be]
[ 0.156908] pnp 00:0a: [irq 7]
[ 0.156990] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.157116] pnp 00:0b: Plug and Play ACPI device, IDs NSC1100 (disabled)
[ 0.157663] pnp: PnP ACPI: found 12 devices
[ 0.157670] ACPI: ACPI bus type pnp unregistered
[ 0.194552] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.194558] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.194593] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.194596] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.194603] pci 0000:00:1c.0: BAR 15: assigned [mem 0x60000000-0x601fffff 64bit pref]
[ 0.194615] pci 0000:00:02.1: BAR 0: assigned [mem 0x60200000-0x6027ffff]
[ 0.194626] pci 0000:00:1c.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.194634] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.194642] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
[ 0.194654] pci 0000:00:1c.0: bridge window [mem 0x90100000-0x901fffff]
[ 0.194664] pci 0000:00:1c.0: bridge window [mem 0x60000000-0x601fffff 64bit pref]
[ 0.194678] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.194686] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.194697] pci 0000:00:1c.2: bridge window [mem 0x90200000-0x902fffff]
[ 0.194708] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.194725] pci 0000:04:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.194728] pci 0000:04:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.194731] pci 0000:04:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.194735] pci 0000:04:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.194738] pci 0000:04:00.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[ 0.194748] pci 0000:04:00.0: BAR 16: assigned [mem 0x94000000-0x97ffffff]
[ 0.194756] pci 0000:04:00.0: BAR 13: assigned [io 0x3000-0x30ff]
[ 0.194763] pci 0000:04:00.0: BAR 14: assigned [io 0x3400-0x34ff]
[ 0.194771] pci 0000:04:00.0: CardBus bridge to [bus 05-06]
[ 0.194778] pci 0000:04:00.0: bridge window [io 0x3000-0x30ff]
[ 0.194789] pci 0000:04:00.0: bridge window [io 0x3400-0x34ff]
[ 0.194800] pci 0000:04:00.0: bridge window [mem 0xc8000000-0xcbffffff pref]
[ 0.194813] pci 0000:04:00.0: bridge window [mem 0x94000000-0x97ffffff]
[ 0.194824] pci 0000:00:1e.0: PCI bridge to [bus 04-07]
[ 0.194832] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff]
[ 0.194843] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x9fffffff]
[ 0.194853] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.194901] pci 0000:00:1e.0: setting latency timer to 64
[ 0.194919] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.194923] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.194926] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
[ 0.194929] pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff]
[ 0.194932] pci_bus 0000:02: resource 2 [mem 0x60000000-0x601fffff 64bit pref]
[ 0.194935] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.194938] pci_bus 0000:03: resource 1 [mem 0x90200000-0x902fffff]
[ 0.194942] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.194945] pci_bus 0000:04: resource 0 [io 0x3000-0x6fff]
[ 0.194948] pci_bus 0000:04: resource 1 [mem 0x90300000-0x9fffffff]
[ 0.194951] pci_bus 0000:04: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.194954] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.194957] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[ 0.194960] pci_bus 0000:05: resource 0 [io 0x3000-0x30ff]
[ 0.194963] pci_bus 0000:05: resource 1 [io 0x3400-0x34ff]
[ 0.194966] pci_bus 0000:05: resource 2 [mem 0xc8000000-0xcbffffff pref]
[ 0.194969] pci_bus 0000:05: resource 3 [mem 0x94000000-0x97ffffff]
[ 0.195019] NET: Registered protocol family 2
[ 0.195228] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.196209] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.196895] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.196964] TCP: reno registered
[ 0.196974] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.197002] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.197152] NET: Registered protocol family 1
[ 0.197186] pci 0000:00:02.0: Boot video device
[ 0.197211] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.197250] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.197401] PCI: CLS 32 bytes, default 64
[ 0.197484] Unpacking initramfs...
[ 0.280539] Freeing initrd memory: 2832k freed
[ 0.282775] Simple Boot Flag at 0x35 set to 0x1
[ 0.282873] IBM machine detected. Enabling interrupts during APM calls.
[ 0.282886] apm: BIOS not found.
[ 0.283251] audit: initializing netlink socket (disabled)
[ 0.283279] type=2000 audit(1361200797.279:1): initialized
[ 0.296514] bounce pool size: 64 pages
[ 0.296534] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.298942] VFS: Disk quotas dquot_6.5.2
[ 0.299017] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.299213] msgmni has been set to 1729
[ 0.299478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.299514] io scheduler noop registered
[ 0.299520] io scheduler deadline registered
[ 0.299532] io scheduler cfq registered (default)
[ 0.299703] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.299837] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.300039] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.300046] vesafb: scrolling: redraw
[ 0.300052] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.300254] vesafb: framebuffer at 0xb0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.330264] Console: switching to colour frame buffer device 128x48
[ 0.360485] fb0: VESA VGA frame buffer device
[ 0.360750] intel_idle: does not run on family 6 model 13
[ 0.360784] GHES: HEST is not enabled!
[ 0.361012] isapnp: Scanning for PnP cards...
[ 0.674378] isapnp: No Plug & Play device found
[ 0.674686] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.675428] serial 00:09: [io 0x03f8-0x03ff]
[ 0.675486] serial 00:09: [irq 4]
[ 0.675887] serial 00:09: activated
[ 0.676234] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.676866] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.684988] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.685313] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.685700] mousedev: PS/2 mouse device common for all mice
[ 0.686102] rtc_cmos 00:06: RTC can wake from S4
[ 0.686519] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.686923] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.687341] cpuidle: using governor ladder
[ 0.687574] cpuidle: using governor menu
[ 0.687934] drop_monitor: Initializing network drop monitor service
[ 0.688436] TCP: cubic registered
[ 0.688817] NET: Registered protocol family 10
[ 0.689305] NET: Registered protocol family 17
[ 0.689647] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.690538] Key type dns_resolver registered
[ 0.690916] Using IPI No-Shortcut mode
[ 0.702593] PM: Checking hibernation image partition /dev/sda1
[ 0.705127] PM: Hibernation image not present or could not be loaded.
[ 0.705141] registered taskstats version 1
[ 0.717320] Magic number: 1:190:336
[ 0.728964] tty tty57: hash matches
[ 0.740616] rtc_cmos 00:06: setting system clock to 2013-02-18 15:19:58 UTC (1361200798)
[ 0.752732] Freeing unused kernel memory: 548k freed
[ 0.764952] Write protecting the kernel text: 4032k
[ 0.776824] Write protecting the kernel read-only data: 1232k
[ 0.816790] systemd-udevd[36]: starting version 197
[ 0.901068] ACPI: bus type usb registered
[ 0.926822] SCSI subsystem initialized
[ 0.964790] usbcore: registered new interface driver usbfs
[ 0.979422] ACPI: bus type scsi registered
[ 0.990839] usbcore: registered new interface driver hub
[ 1.002382] usbcore: registered new device driver usb
[ 1.013763] libata version 3.00 loaded.
[ 1.014573] ahci 0000:00:1f.2: version 3.0
[ 1.014601] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.027106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.039317] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.053569] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.053575] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.065731] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.081281] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.092611] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.092638] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90040000
[ 1.113356] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.124771] hub 1-0:1.0: USB hub found
[ 1.135841] hub 1-0:1.0: 8 ports detected
[ 1.146965] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.146970] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.158936] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.170181] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.182086] hub 2-0:1.0: USB hub found
[ 1.193081] hub 2-0:1.0: 2 ports detected
[ 1.203913] ata_piix 0000:00:1f.2: version 2.13
[ 1.203926] ata_piix 0000:00:1f.2: MAP [
[ 1.214479] P0 P2 IDE IDE ]
[ 1.283352] tsc: Refined TSC clocksource calibration: 1862.120 MHz
[ 1.294184] Switching to clocksource tsc
[ 1.376683] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.377327] scsi0 : ata_piix
[ 1.388376] scsi1 : ata_piix
[ 1.399085] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.409910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.420696] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.420701] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.431585] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.442301] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.453744] hub 3-0:1.0: USB hub found
[ 1.464541] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.475377] hub 3-0:1.0: 2 ports detected
[ 1.486257] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.486262] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.497023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.507997] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.520422] hub 4-0:1.0: USB hub found
[ 1.531202] hub 4-0:1.0: 2 ports detected
[ 1.542262] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.542267] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.552709] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.563245] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.574200] hub 5-0:1.0: USB hub found
[ 1.585064] hub 5-0:1.0: 2 ports detected
[ 1.595479] ata1.00: ATA-6: HTS548040M9AT00, MG2OA5BA, max UDMA/100
[ 1.606638] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.617160] ata1.00: applying bridge limits
[ 1.627790] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0J05, max UDMA/33
[ 1.639451] hub 1-1:1.0: USB hub found
[ 1.650634] ata1.00: configured for UDMA/100
[ 1.661539] hub 1-1:1.0: 4 ports detected
[ 1.672418] ata2.00: configured for UDMA/33
[ 1.683137] scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
[ 1.710674] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4242N 0J05 PQ: 0 ANSI: 5
[ 1.694525] ACPI: Invalid Power Resource to register!
[ 1.733155] ACPI: Invalid Power Resource to register!
[ 1.748928] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.772323] sd 0:0:0:0: [sda] Write Protect is off
[ 1.784020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.784045] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.798273] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.810445] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 1.823021] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.835809] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.846487] sda: sda1 sda2
[ 1.859101] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.964092] Initializing USB Mass Storage driver...
[ 1.976772] scsi2 : usb-storage 1-4:1.0
[ 1.989454] usbcore: registered new interface driver usb-storage
[ 2.002087] USB Mass Storage support registered.
[ 2.413349] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.994061] scsi 2:0:0:0: Direct-Access ST925031 5AS 0200 PQ: 0 ANSI: 4
[ 3.009300] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.029796] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.043068] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 3.050047] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.063221] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.091296] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.104427] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.877529] sdb: sdb1 sdb3
[ 4.942054] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.955191] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.968339] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 4.994201] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.403394] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 6.559879] systemd[1]: Set hostname to <onny>.
[ 7.781534] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 7.810561] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.825168] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.839819] systemd[1]: Starting Remote File Systems.
[ 7.869191] systemd[1]: Reached target Remote File Systems.
[ 7.883859] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.912608] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.927149] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.955345] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.969374] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.997424] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.011422] systemd[1]: Starting LVM2 metadata daemon socket.
[ 8.039372] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 8.053499] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 8.067845] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.082320] systemd[1]: Starting udev Kernel Socket.
[ 8.110917] systemd[1]: Listening on udev Kernel Socket.
[ 8.125252] systemd[1]: Starting udev Control Socket.
[ 8.153873] systemd[1]: Listening on udev Control Socket.
[ 8.168020] systemd[1]: Starting Encrypted Volumes.
[ 8.195998] systemd[1]: Reached target Encrypted Volumes.
[ 8.210134] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 8.239469] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.254476] systemd[1]: Expecting device dev-sda2.device...
[ 8.284134] systemd[1]: Starting Journal Socket.
[ 8.313921] systemd[1]: Listening on Journal Socket.
[ 8.328852] systemd[1]: Started File System Check on Root Device.
[ 8.343873] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.399956] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.525714] systemd[1]: Starting Apply Kernel Variables...
[ 8.652768] systemd[1]: Starting Set Up Additional Binary Formats...
[ 8.835624] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 8.923132] systemd[1]: Mounting Huge Pages File System...
[ 8.956692] systemd[1]: Mounting Debug File System...
[ 8.991177] systemd[1]: Starting udev Kernel Device Manager...
[ 9.043008] systemd[1]: Starting udev Coldplug all Devices...
[ 9.142117] systemd[1]: Starting Setup Virtual Console...
[ 9.211935] systemd-udevd[111]: starting version 197
[ 9.300417] systemd[1]: Started Load Kernel Modules.
[ 9.314485] systemd[1]: Mounted FUSE Control File System.
[ 9.328485] systemd[1]: Mounted Configuration File System.
[ 9.342239] systemd[1]: Starting Journal Service...
[ 9.655196] systemd[1]: Started Journal Service.
[ 9.682276] systemd[1]: Started udev Kernel Device Manager.
[ 9.709548] systemd[1]: Started Remount Root and Kernel File Systems.
[ 9.736631] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.766972] systemd[1]: Started Apply Kernel Variables.
[ 9.795701] systemd[1]: Mounted Huge Pages File System.
[ 9.823933] systemd[1]: Mounted Debug File System.
[ 9.843475] systemd[1]: Starting Local File Systems (Pre).
[ 9.877624] systemd[1]: Reached target Local File Systems (Pre).
[ 9.890716] systemd[1]: Mounting /tmp...
[ 10.005983] systemd[1]: Starting Load Random Seed...
[ 10.087604] systemd[1]: Mounted /tmp.
[ 10.100412] systemd[1]: Starting Local File Systems.
[ 10.125874] systemd[1]: Reached target Local File Systems.
[ 10.138536] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 10.257142] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 10.890333] systemd-journald[117]: Received SIGUSR1
[ 12.922087] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 12.936807] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 12.951574] ACPI: AC Adapter [AC] (on-line)
[ 12.967876] thermal LNXTHERM:00: registered as thermal_zone0
[ 12.982991] ACPI: Thermal Zone [THM0] (62 C)
[ 12.996527] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 13.010837] ACPI: Lid Switch [LID]
[ 13.024566] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 13.040438] ACPI: Sleep Button [SLPB]
[ 13.055110] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 13.076717] ACPI: Power Button [PWRF]
[ 13.091784] ACPI: Battery Slot [BAT0] (battery present)
[ 13.160746] ACPI: Requesting acpi_cpufreq
[ 13.193595] intel_rng: FWH not detected
[ 13.244600] tsc: Marking TSC unstable due to TSC halts in idle
[ 13.259408] ACPI: acpi_idle registered with cpuidle
[ 13.261232] Switching to clocksource hpet
[ 13.311635] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.472965] P-state transition latency capped at 20 uS
[ 13.487858] yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0528]
[ 13.502280] yenta_cardbus 0000:04:00.0: Using INTVAL to route CSC interrupts to PCI
[ 13.516710] yenta_cardbus 0000:04:00.0: Routing CardBus interrupts to PCI
[ 13.530624] yenta_cardbus 0000:04:00.0: TI: mfunc 0x01d21002, devctl 0x64
[ 13.672509] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 13.705075] tg3.c:v3.124 (March 21, 2012)
[ 13.722637] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.748998] Linux agpgart interface v0.103
[ 13.776474] Non-volatile memory driver v1.3
[ 13.791387] yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 13.807001] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
[ 13.824513] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.846695] yenta_cardbus 0000:04:00.0: Socket status: 30000007
[ 13.862067] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 13.877952] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 13.893883] ppdev: user-space parallel port driver
[ 13.909551] iTCO_vendor_support: vendor-support=0
[ 13.928233] cfg80211: Calling CRDA to update world regulatory domain
[ 13.946223] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x6fff]
[ 13.967569] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 13.982019] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 13.997792] lib80211: common routines for IEEE802.11 drivers
[ 14.015573] lib80211_crypt: registered algorithm 'NULL'
[ 14.016775] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 14.031773] [drm] Initialized drm 1.1.0 20060810
[ 14.050113] thinkpad_acpi: ThinkPad BIOS 70ET69WW (1.29 ), EC 70HT28WW-1.05
[ 14.072317] thinkpad_acpi: IBM ThinkPad T43, model 1871F1G
[ 14.094661] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 14.109454] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 14.131789] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x6fff:
[ 14.148209] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 14.164030] libipw: 802.11 data/management/control stack, git-1.1.13
[ 14.180241] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 14.196111] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 14.211077] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:16:41:10:c2:72
[ 14.226345] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 14.244891] Registered led device: tpacpi::thinklight
[ 14.245213] Registered led device: tpacpi::power
[ 14.245519] Registered led device: tpacpi::standby
[ 14.248009] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 14.263481] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 14.290874] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 14.303439] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
[ 14.304438] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 14.328808] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 14.333431] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 14.333434] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 14.336759] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 14.336760] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 14.341076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.366959] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[ 14.366960] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 14.246551] excluding 0x3000-0x30ff 0x3400-0x34ff
[ 14.376256] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0x90300000-0x9fffffff]
[ 14.376260] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90300000-0x9fffffff:
[ 14.376262] excluding
[ 14.376263] 0x90300000-0x90afffff
[ 14.376270] 0x93b00000-0x982fffff
[ 14.376280] 0x9fb00000-0xa02fffff
[ 14.376283] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xc8000000-0xcfffffff 64bit pref]
[ 14.376286] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8000000-0xcfffffff:
[ 14.376296] excluding
[ 14.376296] 0xc8000000-0xcfffffff
[ 14.392842] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 14.658946] Console: switching to colour dummy device 80x25
[ 14.659522] i915 0000:00:02.0: setting latency timer to 64
[ 14.661128] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.661140] [drm] Driver supports precise vblank timestamp query.
[ 14.686729] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.696969] i915: fixme: max PWM is zero
[ 14.912219] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0, board id: 71, fw id: 4797594
[ 14.912264] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 14.956847] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 14.985491] [drm] initialized overlay support
[ 15.215511] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 15.217188] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 15.218013] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 15.218412] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 15.218810] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 15.219558] clean.
[ 15.219618] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 15.221552] clean.
[ 15.221625] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 15.221650] excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 15.221731] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 15.221781] clean.
[ 15.221836] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 15.221860] excluding 0x60000000-0x602fffff
[ 15.221941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 15.222829] clean.
[ 15.260560] fbcon: inteldrmfb (fb0) is primary device
[ 15.306715] Console: switching to colour frame buffer device 128x48
[ 15.318861] fb0: inteldrmfb frame buffer device
[ 15.318948] drm: registered panic notifier
[ 15.319038] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.319279] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 16.243455] intel8x0_measure_ac97_clock: measured 52708 usecs (2540 samples)
[ 16.243727] intel8x0: clocking to 48000
[ 16.317856] Adding 2048380k swap on /dev/sda2. Priority:-1 extents:1 across:2048380k
[ 17.475032] psmouse serio2: hgpk: ID: 10 00 64
[ 20.944810] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 21.178704] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 25.826156] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 31.412353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.556219] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 34.947150] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[ 35.132573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.184249] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 38.533400] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 39.472900] lib80211_crypt: registered algorithm 'CCMP'
[-- Attachment #1.4: dmesg_good_kernel --]
[-- Type: text/plain, Size: 54988 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.0-35-bisect (root@playground_32) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Feb 18 14:43:05 UTC 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f6e0000-0x000000005f6f4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005f6f5000-0x000000005f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI present.
[ 0.000000] DMI: IBM 1871F1G/1871F1G, BIOS 70ET69WW (1.29 ) 05/29/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5f6e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a68000-0x37d2bfff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3753a000-0x377fd447]
[ 0.000000] Move RAMDISK from [mem 0x37a68000-0x37d2b447] to [mem 0x3753a000-0x377fd447]
[ 0.000000] ACPI: RSDP 000f6b90 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 5f6e71d4 00064 (v01 DELL M09 00001290 LTP 00000000)
[ 0.000000] ACPI: FACP 5f6e7300 000F4 (v03 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120711/tbfadt-567)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120711/tbfadt-598)
[ 0.000000] ACPI: DSDT 5f6e74e7 0D7A8 (v01 DELL M09 00001290 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5f6f6000 00040
[ 0.000000] ACPI: SSDT 5f6e74b4 00033 (v01 DELL M09 00001290 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 5f6f4c8f 00052 (v01 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI: TCPA 5f6f4ce1 00032 (v01 DELL M09 00001290 PTL 00000001)
[ 0.000000] ACPI: APIC 5f6f4d13 0005A (v01 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI: MCFG 5f6f4d6d 0003E (v01 DELL M09 00001290 IBM 00000001)
[ 0.000000] ACPI: SLIC 5f6f4dab 00176 (v01 DELL M09 00001290 ASL 00000061)
[ 0.000000] ACPI: BOOT 5f6f4fd8 00028 (v01 DELL M09 00001290 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 638MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x5f6dffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5f6dffff]
[ 0.000000] On node 0 totalpages: 390767
[ 0.000000] free_area_init_node: node 0, pgdat c1574a40, node_mem_map f6949200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1278 pages used for memmap
[ 0.000000] HighMem zone: 162276 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6933000 s32320 r0 d20928 u53248
[ 0.000000] pcpu-alloc: s32320 r0 d20928 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387713
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-bisect root=UUID=89b7a62a-2ab6-4c47-8158-67f559a5bd97 ro init=/bin/systemd resume=/dev/sda1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3126912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005f6e0)
[ 0.000000] Memory: 1536908k/1563520k available (4028k kernel code, 26160k reserved, 1615k data, 548k init, 654216k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1583000 - 0xc160c000 ( 548 kB)
.data : 0xc13ef036 - 0xc1583000 (1615 kB)
.text : 0xc1000000 - 0xc13ef036 (4028 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.199 MHz processor
[ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.58 BogoMIPS (lpj=6207330)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.003389] Security Framework initialized
[ 0.003405] AppArmor: AppArmor disabled by boot time parameter
[ 0.003431] Mount-cache hash table entries: 512
[ 0.003721] Initializing cgroup subsys cpuacct
[ 0.003728] Initializing cgroup subsys memory
[ 0.003743] Initializing cgroup subsys devices
[ 0.003749] Initializing cgroup subsys freezer
[ 0.003755] Initializing cgroup subsys net_cls
[ 0.003761] Initializing cgroup subsys blkio
[ 0.003796] Disabled fast string operations
[ 0.003807] mce: CPU supports 5 MCE banks
[ 0.003820] CPU0: Thermal monitoring enabled (TM2)
[ 0.003838] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift is 0x6
[ 0.003926] SMP alternatives: switching to UP code
[ 0.010714] Freeing SMP alternatives: 16k freed
[ 0.010725] ACPI: Core revision 20120711
[ 0.020011] ftrace: allocating 17441 entries in 35 pages
[ 0.030067] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.030523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065863] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[ 0.066662] Performance Events: p6 PMU driver.
[ 0.066662] ... version: 0
[ 0.066662] ... bit width: 32
[ 0.066662] ... generic registers: 2
[ 0.066662] ... value mask: 00000000ffffffff
[ 0.066662] ... max period: 000000007fffffff
[ 0.066662] ... fixed-purpose events: 0
[ 0.066662] ... event mask: 0000000000000003
[ 0.090472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090516] Brought up 1 CPUs
[ 0.090522] smpboot: Total of 1 processors activated (3725.58 BogoMIPS)
[ 0.091881] devtmpfs: initialized
[ 0.092168] PM: Registering ACPI NVS region [mem 0x5f6f5000-0x5f6fffff] (45056 bytes)
[ 0.093406] RTC time: 15:50:10, date: 02/18/13
[ 0.093469] NET: Registered protocol family 16
[ 0.093687] ACPI: bus type pci registered
[ 0.093776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.093787] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.093794] PCI: Using MMCONFIG for extended config space
[ 0.093799] PCI: Using configuration type 1 for base access
[ 0.094517] bio: create slab <bio-0> at 0
[ 0.094595] ACPI: Added _OSI(Module Device)
[ 0.094601] ACPI: Added _OSI(Processor Device)
[ 0.094607] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.094613] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.096569] ACPI: EC: EC description table is found, configuring boot EC
[ 0.107911] ACPI: Interpreter enabled
[ 0.107922] ACPI: (supports S0 S3 S4 S5)
[ 0.107946] ACPI: Using IOAPIC for interrupt routing
[ 0.110690] ACPI: Power Resource [PUBS] (on)
[ 0.113929] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.117336] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.117347] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.117381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.117417] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.117420] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.117423] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.117427] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.117430] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.117433] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.117437] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.117439] PCI: root bus 00: using default resources
[ 0.117482] PCI host bridge to bus 0000:00
[ 0.117491] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.117494] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.117502] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.117509] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.117526] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.117573] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.117583] pci 0000:00:02.0: reg 10: [mem 0x90080000-0x900fffff]
[ 0.117590] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.117596] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff pref]
[ 0.117603] pci 0000:00:02.0: reg 1c: [mem 0x90000000-0x9003ffff]
[ 0.117637] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.117646] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
[ 0.117737] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.117840] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.117875] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
[ 0.117978] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.118014] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.118066] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.118108] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.118160] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.118202] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.118256] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.118298] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.118350] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.118402] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.118424] pci 0000:00:1d.7: reg 10: [mem 0x90040000-0x900403ff]
[ 0.118526] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.118551] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.118640] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.118658] pci 0000:00:1e.2: reg 10: [io 0x1c00-0x1cff]
[ 0.118671] pci 0000:00:1e.2: reg 14: [io 0x18c0-0x18ff]
[ 0.118683] pci 0000:00:1e.2: reg 18: [mem 0x90040800-0x900409ff]
[ 0.118695] pci 0000:00:1e.2: reg 1c: [mem 0x90040400-0x900404ff]
[ 0.118756] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.118783] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.118891] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.118900] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.118913] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.118923] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[ 0.118933] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15e0-15ef
[ 0.118965] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.118983] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.118995] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.119007] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.119019] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.119031] pci 0000:00:1f.2: reg 20: [io 0x1810-0x181f]
[ 0.119084] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.119104] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.119173] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.119275] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.119308] pci 0000:02:00.0: [14e4:167d] type 00 class 0x020000
[ 0.119337] pci 0000:02:00.0: reg 10: [mem 0x90100000-0x9010ffff 64bit]
[ 0.119498] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.119524] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.119545] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.119558] pci 0000:00:1c.0: bridge window [mem 0x90100000-0x901fffff]
[ 0.119618] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.119623] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.119632] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.119638] pci 0000:00:1c.2: bridge window [mem 0x90200000-0x902fffff]
[ 0.119646] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.119677] pci_bus 0000:04: busn_res: [bus 04-07] is inserted under [bus 00-ff]
[ 0.119695] pci 0000:04:00.0: [104c:ac56] type 02 class 0x060700
[ 0.119721] pci 0000:04:00.0: reg 10: [mem 0x90300000-0x90300fff]
[ 0.119767] pci 0000:04:00.0: supports D1 D2
[ 0.119770] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119801] pci 0000:04:02.0: [8086:1043] type 00 class 0x028000
[ 0.119826] pci 0000:04:02.0: reg 10: [mem 0x90301000-0x90301fff]
[ 0.120044] pci 0000:00:1e.0: PCI bridge to [bus 04-07] (subtractive decode)
[ 0.120055] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff]
[ 0.120060] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x9fffffff]
[ 0.120068] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.120072] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.120075] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.120125] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under [bus 04-07] (conflicts with (null) [bus 04-07])
[ 0.120131] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 06
[ 0.120134] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 04-07]
[ 0.120159] pci_bus 0000:00: on NUMA node 0
[ 0.120163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.120260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.120301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.120346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.120433] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.120443] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.124107] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124203] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124297] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124390] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124483] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124669] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124762] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.124865] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.124880] vgaarb: loaded
[ 0.124885] vgaarb: bridge control possible 0000:00:02.0
[ 0.124939] PCI: Using ACPI for IRQ routing
[ 0.134749] PCI: pci_cache_line_size set to 64 bytes
[ 0.134822] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.134825] e820: reserve RAM buffer [mem 0x5f6e0000-0x5fffffff]
[ 0.134955] NetLabel: Initializing
[ 0.134961] NetLabel: domain hash size = 128
[ 0.134966] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.134986] NetLabel: unlabeled traffic allowed by default
[ 0.135149] hpet clockevent registered
[ 0.135153] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.135164] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.135174] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.146675] Switching to clocksource hpet
[ 0.155077] pnp: PnP ACPI init
[ 0.155122] ACPI: bus type pnp registered
[ 0.155658] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.155662] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.155665] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.155668] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.155671] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.155674] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.155677] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.155680] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.155683] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.155685] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.155688] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.155691] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.155694] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.155696] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.155699] pnp 00:00: [mem 0x00100000-0x5fffffff]
[ 0.155702] pnp 00:00: [mem 0xfec00000-0xffffffff]
[ 0.155784] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.155794] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.155802] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.155811] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.155818] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.155827] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.155835] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.155843] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.155851] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.155859] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.155867] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.155875] system 00:00: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.155884] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.155894] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155926] pnp 00:01: [bus 00-ff]
[ 0.155930] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.155933] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.155936] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.155939] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.155942] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.155945] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.155948] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.155951] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.155954] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.155957] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.155960] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.155962] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.155965] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.155968] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.155971] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.155974] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.155977] pnp 00:01: [mem 0x60000000-0xfebfffff window]
[ 0.156042] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.156065] pnp 00:02: [io 0x0010-0x001f]
[ 0.156068] pnp 00:02: [io 0x0090-0x009f]
[ 0.156071] pnp 00:02: [io 0x0024-0x0025]
[ 0.156074] pnp 00:02: [io 0x0028-0x0029]
[ 0.156076] pnp 00:02: [io 0x002c-0x002d]
[ 0.156079] pnp 00:02: [io 0x0030-0x0031]
[ 0.156082] pnp 00:02: [io 0x0034-0x0035]
[ 0.156084] pnp 00:02: [io 0x0038-0x0039]
[ 0.156087] pnp 00:02: [io 0x003c-0x003d]
[ 0.156089] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.156092] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.156095] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.156097] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.156100] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.156103] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.156105] pnp 00:02: [io 0x0050-0x0053]
[ 0.156108] pnp 00:02: [io 0x0072-0x0077]
[ 0.156111] pnp 00:02: [io 0x002e-0x002f]
[ 0.156113] pnp 00:02: [io 0x1000-0x107f]
[ 0.156116] pnp 00:02: [io 0x1180-0x11bf]
[ 0.156119] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.156121] pnp 00:02: [io 0x1600-0x1641]
[ 0.156124] pnp 00:02: [io 0x1644-0x167f]
[ 0.156127] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.156130] pnp 00:02: [mem 0xf0008000-0xf000bfff]
[ 0.156133] pnp 00:02: [mem 0xfed14000-0xfed17fff]
[ 0.156135] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.156138] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.156217] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.156226] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.156233] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.156241] system 00:02: [io 0x1600-0x1641] has been reserved
[ 0.156248] system 00:02: [io 0x1644-0x167f] has been reserved
[ 0.156256] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.156264] system 00:02: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.156272] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.156280] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.156289] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.156297] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.156313] pnp 00:03: [io 0x0000-0x000f]
[ 0.156316] pnp 00:03: [io 0x0080-0x008f]
[ 0.156319] pnp 00:03: [io 0x00c0-0x00df]
[ 0.156326] pnp 00:03: [dma 4]
[ 0.156359] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.156371] pnp 00:04: [io 0x0061]
[ 0.156404] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.156415] pnp 00:05: [io 0x00f0]
[ 0.156431] pnp 00:05: [irq 13]
[ 0.156465] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.156476] pnp 00:06: [io 0x0070-0x0071]
[ 0.156483] pnp 00:06: [irq 8]
[ 0.156521] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.156532] pnp 00:07: [io 0x0060]
[ 0.156535] pnp 00:07: [io 0x0064]
[ 0.156541] pnp 00:07: [irq 1]
[ 0.156575] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.156589] pnp 00:08: [irq 12]
[ 0.156624] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.156786] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.156901] pnp 00:0a: [io 0x03bc-0x03be]
[ 0.156909] pnp 00:0a: [irq 7]
[ 0.156991] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.157117] pnp 00:0b: Plug and Play ACPI device, IDs NSC1100 (disabled)
[ 0.157678] pnp: PnP ACPI: found 12 devices
[ 0.157685] ACPI: ACPI bus type pnp unregistered
[ 0.194558] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.194564] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.194599] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.194603] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.194610] pci 0000:00:1c.0: BAR 15: assigned [mem 0x60000000-0x601fffff 64bit pref]
[ 0.194622] pci 0000:00:02.1: BAR 0: assigned [mem 0x60200000-0x6027ffff]
[ 0.194633] pci 0000:00:1c.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.194642] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.194650] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
[ 0.194661] pci 0000:00:1c.0: bridge window [mem 0x90100000-0x901fffff]
[ 0.194671] pci 0000:00:1c.0: bridge window [mem 0x60000000-0x601fffff 64bit pref]
[ 0.194686] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.194693] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.194705] pci 0000:00:1c.2: bridge window [mem 0x90200000-0x902fffff]
[ 0.194715] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.194732] pci 0000:04:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.194735] pci 0000:04:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.194739] pci 0000:04:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.194742] pci 0000:04:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.194746] pci 0000:04:00.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[ 0.194755] pci 0000:04:00.0: BAR 16: assigned [mem 0x94000000-0x97ffffff]
[ 0.194763] pci 0000:04:00.0: BAR 13: assigned [io 0x3000-0x30ff]
[ 0.194771] pci 0000:04:00.0: BAR 14: assigned [io 0x3400-0x34ff]
[ 0.194779] pci 0000:04:00.0: CardBus bridge to [bus 05-06]
[ 0.194786] pci 0000:04:00.0: bridge window [io 0x3000-0x30ff]
[ 0.194797] pci 0000:04:00.0: bridge window [io 0x3400-0x34ff]
[ 0.194808] pci 0000:04:00.0: bridge window [mem 0xc8000000-0xcbffffff pref]
[ 0.194820] pci 0000:04:00.0: bridge window [mem 0x94000000-0x97ffffff]
[ 0.194831] pci 0000:00:1e.0: PCI bridge to [bus 04-07]
[ 0.194839] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff]
[ 0.194850] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x9fffffff]
[ 0.194861] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.194909] pci 0000:00:1e.0: setting latency timer to 64
[ 0.194927] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.194930] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.194933] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
[ 0.194936] pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff]
[ 0.194940] pci_bus 0000:02: resource 2 [mem 0x60000000-0x601fffff 64bit pref]
[ 0.194943] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.194946] pci_bus 0000:03: resource 1 [mem 0x90200000-0x902fffff]
[ 0.194949] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.194952] pci_bus 0000:04: resource 0 [io 0x3000-0x6fff]
[ 0.194955] pci_bus 0000:04: resource 1 [mem 0x90300000-0x9fffffff]
[ 0.194958] pci_bus 0000:04: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.194961] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.194964] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[ 0.194967] pci_bus 0000:05: resource 0 [io 0x3000-0x30ff]
[ 0.194970] pci_bus 0000:05: resource 1 [io 0x3400-0x34ff]
[ 0.194973] pci_bus 0000:05: resource 2 [mem 0xc8000000-0xcbffffff pref]
[ 0.194976] pci_bus 0000:05: resource 3 [mem 0x94000000-0x97ffffff]
[ 0.195027] NET: Registered protocol family 2
[ 0.195236] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.196219] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.196908] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.196976] TCP: reno registered
[ 0.196986] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.197014] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.197169] NET: Registered protocol family 1
[ 0.197203] pci 0000:00:02.0: Boot video device
[ 0.197228] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.197267] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.197417] PCI: CLS 32 bytes, default 64
[ 0.197501] Unpacking initramfs...
[ 0.280566] Freeing initrd memory: 2832k freed
[ 0.282813] Simple Boot Flag at 0x35 set to 0x1
[ 0.282909] IBM machine detected. Enabling interrupts during APM calls.
[ 0.282922] apm: BIOS not found.
[ 0.283287] audit: initializing netlink socket (disabled)
[ 0.283314] type=2000 audit(1361202610.279:1): initialized
[ 0.296554] bounce pool size: 64 pages
[ 0.296574] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.298978] VFS: Disk quotas dquot_6.5.2
[ 0.299054] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.299252] msgmni has been set to 1729
[ 0.299517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.299553] io scheduler noop registered
[ 0.299559] io scheduler deadline registered
[ 0.299571] io scheduler cfq registered (default)
[ 0.299742] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.299875] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.300078] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.300085] vesafb: scrolling: redraw
[ 0.300091] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.300294] vesafb: framebuffer at 0xb0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.330303] Console: switching to colour frame buffer device 128x48
[ 0.360524] fb0: VESA VGA frame buffer device
[ 0.360788] intel_idle: does not run on family 6 model 13
[ 0.360821] GHES: HEST is not enabled!
[ 0.361049] isapnp: Scanning for PnP cards...
[ 0.674419] isapnp: No Plug & Play device found
[ 0.674728] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.675469] serial 00:09: [io 0x03f8-0x03ff]
[ 0.675527] serial 00:09: [irq 4]
[ 0.675927] serial 00:09: activated
[ 0.676273] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.676904] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.683522] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.683848] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.684235] mousedev: PS/2 mouse device common for all mice
[ 0.684637] rtc_cmos 00:06: RTC can wake from S4
[ 0.685054] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.685444] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.685861] cpuidle: using governor ladder
[ 0.686094] cpuidle: using governor menu
[ 0.686452] drop_monitor: Initializing network drop monitor service
[ 0.686970] TCP: cubic registered
[ 0.687337] NET: Registered protocol family 10
[ 0.687823] NET: Registered protocol family 17
[ 0.688103] Key type dns_resolver registered
[ 0.688481] Using IPI No-Shortcut mode
[ 0.688773] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.700458] PM: Checking hibernation image partition /dev/sda1
[ 0.700474] PM: Hibernation image not present or could not be loaded.
[ 0.700488] registered taskstats version 1
[ 0.712729] Magic number: 1:705:841
[ 0.724446] rtc_cmos 00:06: setting system clock to 2013-02-18 15:50:11 UTC (1361202611)
[ 0.738259] Freeing unused kernel memory: 548k freed
[ 0.750614] Write protecting the kernel text: 4032k
[ 0.762617] Write protecting the kernel read-only data: 1232k
[ 0.800130] systemd-udevd[36]: starting version 197
[ 0.886365] ACPI: bus type usb registered
[ 0.912279] SCSI subsystem initialized
[ 0.950736] usbcore: registered new interface driver usbfs
[ 0.965341] ACPI: bus type scsi registered
[ 0.976931] usbcore: registered new interface driver hub
[ 0.988499] usbcore: registered new device driver usb
[ 0.999826] libata version 3.00 loaded.
[ 1.000646] ahci 0000:00:1f.2: version 3.0
[ 1.000673] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.013138] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.025485] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.039785] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.039792] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.052007] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.067672] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.079215] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.079241] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90040000
[ 1.100038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.111595] hub 1-0:1.0: USB hub found
[ 1.122690] hub 1-0:1.0: 8 ports detected
[ 1.133851] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.133856] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.145858] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.157235] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.169246] hub 2-0:1.0: USB hub found
[ 1.180334] hub 2-0:1.0: 2 ports detected
[ 1.191392] ata_piix 0000:00:1f.2: version 2.13
[ 1.191405] ata_piix 0000:00:1f.2: MAP [
[ 1.202183] P0 P2 IDE IDE ]
[ 1.283352] tsc: Refined TSC clocksource calibration: 1862.120 MHz
[ 1.294301] Switching to clocksource tsc
[ 1.363350] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.363988] scsi0 : ata_piix
[ 1.375085] scsi1 : ata_piix
[ 1.385953] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.397036] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.407743] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.407747] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.418781] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.429617] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.441084] hub 3-0:1.0: USB hub found
[ 1.451733] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.462765] hub 3-0:1.0: 2 ports detected
[ 1.473860] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.473865] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.485028] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.496129] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.507685] hub 4-0:1.0: USB hub found
[ 1.518436] hub 4-0:1.0: 2 ports detected
[ 1.529254] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.529259] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.539644] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.550169] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.561120] hub 5-0:1.0: USB hub found
[ 1.571969] hub 5-0:1.0: 2 ports detected
[ 1.582380] ata1.00: ATA-6: HTS548040M9AT00, MG2OA5BA, max UDMA/100
[ 1.593534] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.604082] ata1.00: applying bridge limits
[ 1.614729] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0J05, max UDMA/33
[ 1.626346] hub 1-1:1.0: USB hub found
[ 1.637516] ata1.00: configured for UDMA/100
[ 1.648420] hub 1-1:1.0: 4 ports detected
[ 1.659301] ata2.00: configured for UDMA/33
[ 1.670036] scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
[ 1.697532] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4242N 0J05 PQ: 0 ANSI: 5
[ 1.681439] ACPI: Invalid Power Resource to register!
[ 1.720037] ACPI: Invalid Power Resource to register!
[ 1.735900] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.759284] sd 0:0:0:0: [sda] Write Protect is off
[ 1.770974] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.770999] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.785334] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.797495] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 1.810062] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.822840] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.831856] sda: sda1 sda2
[ 1.844424] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.951963] Initializing USB Mass Storage driver...
[ 1.964540] scsi2 : usb-storage 1-4:1.0
[ 1.977157] usbcore: registered new interface driver usb-storage
[ 1.989775] USB Mass Storage support registered.
[ 2.308228] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.400016] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.984069] scsi 2:0:0:0: Direct-Access ST925031 5AS 0200 PQ: 0 ANSI: 4
[ 2.998933] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.020052] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.033843] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 3.040677] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.054381] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.082802] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.096452] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.570063] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.715499] systemd[1]: Set hostname to <onny>.
[ 4.862908] sdb: sdb1 sdb3
[ 4.891805] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.905604] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.919529] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 4.959306] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 4.988462] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.003239] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.017925] systemd[1]: Starting Remote File Systems.
[ 5.047365] systemd[1]: Reached target Remote File Systems.
[ 5.062207] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.091659] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.106131] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.135119] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.149237] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.177735] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.191923] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.220139] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.234318] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.248756] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.263308] systemd[1]: Starting udev Kernel Socket.
[ 5.292145] systemd[1]: Listening on udev Kernel Socket.
[ 5.306597] systemd[1]: Starting udev Control Socket.
[ 5.335313] systemd[1]: Listening on udev Control Socket.
[ 5.349620] systemd[1]: Starting Encrypted Volumes.
[ 5.377726] systemd[1]: Reached target Encrypted Volumes.
[ 5.391701] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.420193] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.434626] systemd[1]: Expecting device dev-sda2.device...
[ 5.463599] systemd[1]: Starting Journal Socket.
[ 5.492780] systemd[1]: Listening on Journal Socket.
[ 5.507097] systemd[1]: Started File System Check on Root Device.
[ 5.521124] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.566621] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.692367] systemd[1]: Starting Apply Kernel Variables...
[ 5.819415] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.994278] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 6.090456] systemd[1]: Mounting Huge Pages File System...
[ 6.123418] systemd[1]: Mounting Debug File System...
[ 6.157846] systemd[1]: Starting udev Kernel Device Manager...
[ 6.209651] systemd[1]: Starting udev Coldplug all Devices...
[ 6.297718] systemd[1]: Starting Setup Virtual Console...
[ 6.367536] systemd-udevd[109]: starting version 197
[ 6.456006] systemd[1]: Started Load Kernel Modules.
[ 6.470087] systemd[1]: Mounted FUSE Control File System.
[ 6.484092] systemd[1]: Mounted Configuration File System.
[ 6.497860] systemd[1]: Starting Journal Service...
[ 6.766720] systemd[1]: Started Journal Service.
[ 6.793952] systemd[1]: Started udev Kernel Device Manager.
[ 6.821122] systemd[1]: Started Remount Root and Kernel File Systems.
[ 6.848370] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.876973] systemd[1]: Started Apply Kernel Variables.
[ 6.905717] systemd[1]: Mounted Huge Pages File System.
[ 6.933591] systemd[1]: Mounted Debug File System.
[ 6.953474] systemd[1]: Starting Local File Systems (Pre).
[ 6.987200] systemd[1]: Reached target Local File Systems (Pre).
[ 7.000406] systemd[1]: Mounting /tmp...
[ 7.182607] systemd[1]: Starting Load Random Seed...
[ 7.254264] systemd[1]: Mounted /tmp.
[ 7.267068] systemd[1]: Starting Local File Systems.
[ 7.292696] systemd[1]: Reached target Local File Systems.
[ 7.305572] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 7.456932] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 8.010634] systemd-journald[115]: Received SIGUSR1
[ 9.880342] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 9.922876] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 10.171403] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 10.186546] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 10.201650] ACPI: Requesting acpi_cpufreq
[ 10.216841] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 10.239820] ACPI: Battery Slot [BAT0] (battery present)
[ 10.257649] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.272202] ACPI: Lid Switch [LID]
[ 10.286260] ACPI: AC Adapter [AC] (on-line)
[ 10.301651] parport_pc 00:0a: reported by Plug and Play ACPI
[ 10.317021] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 10.331361] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.349858] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 10.365118] tsc: Marking TSC unstable due to TSC halts in idle
[ 10.379024] ACPI: acpi_idle registered with cpuidle
[ 10.379101] ACPI: Sleep Button [SLPB]
[ 10.397536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.411485] Switching to clocksource hpet
[ 10.425690] ACPI: Power Button [PWRF]
[ 10.442324] ACPI: Thermal Zone [THM0] (63 C)
[ 10.588611] ppdev: user-space parallel port driver
[ 10.602897] intel_rng: FWH not detected
[ 10.645430] Non-volatile memory driver v1.3
[ 10.687044] Linux agpgart interface v0.103
[ 10.797966] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
[ 10.816906] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 10.833071] [drm] Initialized drm 1.1.0 20060810
[ 10.867806] P-state transition latency capped at 20 uS
[ 10.935106] cfg80211: Calling CRDA to update world regulatory domain
[ 11.020726] iTCO_vendor_support: vendor-support=0
[ 11.064189] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 11.080844] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 11.103657] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.123609] tg3.c:v3.124 (March 21, 2012)
[ 11.137769] lib80211: common routines for IEEE802.11 drivers
[ 11.152114] lib80211_crypt: registered algorithm 'NULL'
[ 11.203602] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:16:41:10:c2:72
[ 11.218091] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 11.232807] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 11.247281] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 11.263069] libipw: 802.11 data/management/control stack, git-1.1.13
[ 11.277344] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 11.418922] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 11.436875] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 11.453580] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 11.469808] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 11.485541] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 11.501342] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 11.520430] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 11.535474] thinkpad_acpi: ThinkPad BIOS 70ET69WW (1.29 ), EC 70HT28WW-1.05
[ 11.550091] thinkpad_acpi: IBM ThinkPad T43, model 1871F1G
[ 11.570892] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 11.590583] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 11.609951] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[ 11.609956] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 11.624201] Console: switching to colour dummy device 80x25
[ 11.624760] i915 0000:00:02.0: setting latency timer to 64
[ 11.626080] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.626093] [drm] Driver supports precise vblank timestamp query.
[ 11.628376] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 11.633030] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 11.633686] Registered led device: tpacpi::thinklight
[ 11.634000] Registered led device: tpacpi::power
[ 11.634305] Registered led device: tpacpi::standby
[ 11.645339] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 11.647143] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
[ 11.650867] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 11.657425] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.670360] i915: fixme: max PWM is zero
[ 11.694764] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0, board id: 71, fw id: 4797594
[ 11.694803] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 11.736297] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 11.953629] [drm] initialized overlay support
[ 12.234504] fbcon: inteldrmfb (fb0) is primary device
[ 12.280089] Console: switching to colour frame buffer device 128x48
[ 12.289698] fb0: inteldrmfb frame buffer device
[ 12.289784] drm: registered panic notifier
[ 12.289873] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.290537] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 12.294328] yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0528]
[ 12.294492] yenta_cardbus 0000:04:00.0: Using INTVAL to route CSC interrupts to PCI
[ 12.296647] yenta_cardbus 0000:04:00.0: Routing CardBus interrupts to PCI
[ 12.297980] yenta_cardbus 0000:04:00.0: TI: mfunc 0x01d21002, devctl 0x64
[ 12.527401] yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0c78, PCI irq 16
[ 12.527541] yenta_cardbus 0000:04:00.0: Socket status: 30000007
[ 12.527750] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x6fff]
[ 12.527913] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x6fff:
[ 12.529387] excluding 0x3000-0x30ff 0x3400-0x34ff
[ 12.553320] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0x90300000-0x9fffffff]
[ 12.553792] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90300000-0x9fffffff:
[ 12.553857] excluding 0x90300000-0x90afffff 0x93b00000-0x982fffff 0x9fb00000-0xa02fffff
[ 12.555535] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xc8000000-0xcfffffff 64bit pref]
[ 12.555622] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8000000-0xcfffffff:
[ 12.555692] excluding 0xc8000000-0xcfffffff
[ 12.724728] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 12.726100] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 12.727443] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 12.727951] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 12.728443] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 12.735306] clean.
[ 12.740596] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 12.746627] clean.
[ 12.753623] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 12.759460] excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 12.764624] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 12.767675] clean.
[ 12.771136] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 12.774081] excluding 0x60000000-0x602fffff
[ 12.776408] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 12.780326] clean.
[ 12.976879] Adding 2048380k swap on /dev/sda2. Priority:-1 extents:1 across:2048380k
[ 13.243374] intel8x0_measure_ac97_clock: measured 52622 usecs (2536 samples)
[ 13.248053] intel8x0: clocking to 48000
[ 14.286737] psmouse serio2: hgpk: ID: 10 00 64
[ 17.760059] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 17.998209] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 23.036882] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 29.220721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.486918] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 33.000487] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[ 33.189179] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.290980] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 36.556744] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 37.490705] lib80211_crypt: registered algorithm 'CCMP'
[ 54.060470] tun: Universal TUN/TAP device driver, 1.6
[ 54.060557] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume
2013-02-18 15:54 [Bisected] 3.7-rc1 can't resume Jonas Heinrich
@ 2013-02-18 16:21 ` H. Peter Anvin
2013-02-23 13:18 ` Jonas Heinrich
0 siblings, 1 reply; 30+ messages in thread
From: H. Peter Anvin @ 2013-02-18 16:21 UTC (permalink / raw)
To: Jonas Heinrich, len.brown, pavel, tglx, mingo, x86, rjw
Cc: linux-kernel, linux-pm
I might be able to get my hands on a T43 later this week and see if I can reproduce this. This patch seems more plausible, at least... but still puzzling.
Jonas Heinrich <onny@project-insanity.org> wrote:
>On 02-17 21:40, Rafael J. Wysocki wrote:
>> Does the commit immediately preceding this one behave correctly?
>Strangely the preceding commit works well, so I bisected the kernel
>again, this time more carefully and I've got a different result!
>(see bisect_log attachement).
>It seems to be commit 73201dbec64aebf6b0dca855b523f437972dc7bb
>(https://patchwork.kernel.org/patch/1511921/).
>Someone on LKML already reported an issue with this commit
>(https://lkml.org/lkml/2012/10/18/228) , but Peter
>Anvins patch got already applied in newer versions.
>Reverting this patch with the recent git clone seems to be difficult
>because it already has too much dependencies.
>
>Additionally I've included dmesg dumps of the last good and the bad
>kernel version.
>
>On 02-17 12:52, H. Peter Anvin wrote:
>> T43 is quite old... which might have exposed unique bugs. How
>reliable is the failure? Even one misidentified commit results in git
>bisect giving garbage.
>It affects really all versions after that commit and the failure
>happens
>every time I try to resume my notebook.
>
>Best regards,
>Jonas
--
Sent from my mobile phone. Please excuse brevity and lack of formatting.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume
2013-02-18 16:21 ` H. Peter Anvin
@ 2013-02-23 13:18 ` Jonas Heinrich
2013-02-23 21:54 ` H. Peter Anvin
0 siblings, 1 reply; 30+ messages in thread
From: Jonas Heinrich @ 2013-02-23 13:18 UTC (permalink / raw)
To: H. Peter Anvin, len.brown, pavel, tglx, mingo, x86, rjw
Cc: linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 2539 bytes --]
Hi,
thank you for your replay and the effort you invest in helping me out
with this problem.
Today, I further debuged the problem and reverted this part of your commit
(without understanding the actual code):
diff --git a/arch/x86/realmode/rm/wakeup_asm.S b/arch/x86/realmode/rm/wakeup_asm.S
index 8905166..e56479e 100644
--- a/arch/x86/realmode/rm/wakeup_asm.S
+++ b/arch/x86/realmode/rm/wakeup_asm.S
@@ -110,15 +119,15 @@ ENTRY(wakeup_start)
movl pmode_cr3, %eax
movl %eax, %cr3
- movl pmode_cr4, %ecx
- jecxz 1f
- movl %ecx, %cr4
+ btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
+ jz 1f
+ movl pmode_cr4, %eax
+ movl %eax, %cr4
1:
+ btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
+ jz 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
- movl %eax, %ecx
- orl %edx, %ecx
- jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
I applied this change to the current 3.8 kernel and it worked!
If you need more test results, just send me patches and I'll try them :)
Best regards,
Jonas
On 02-18 08:21, H. Peter Anvin wrote:
> I might be able to get my hands on a T43 later this week and see if I can reproduce this. This patch seems more plausible, at least... but still puzzling.
>
> Jonas Heinrich <onny@project-insanity.org> wrote:
>
> >On 02-17 21:40, Rafael J. Wysocki wrote:
> >> Does the commit immediately preceding this one behave correctly?
> >Strangely the preceding commit works well, so I bisected the kernel
> >again, this time more carefully and I've got a different result!
> >(see bisect_log attachement).
> >It seems to be commit 73201dbec64aebf6b0dca855b523f437972dc7bb
> >(https://patchwork.kernel.org/patch/1511921/).
> >Someone on LKML already reported an issue with this commit
> >(https://lkml.org/lkml/2012/10/18/228) , but Peter
> >Anvins patch got already applied in newer versions.
> >Reverting this patch with the recent git clone seems to be difficult
> >because it already has too much dependencies.
> >
> >Additionally I've included dmesg dumps of the last good and the bad
> >kernel version.
> >
> >On 02-17 12:52, H. Peter Anvin wrote:
> >> T43 is quite old... which might have exposed unique bugs. How
> >reliable is the failure? Even one misidentified commit results in git
> >bisect giving garbage.
> >It affects really all versions after that commit and the failure
> >happens
> >every time I try to resume my notebook.
> >
> >Best regards,
> >Jonas
>
> --
> Sent from my mobile phone. Please excuse brevity and lack of formatting.
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume
2013-02-23 13:18 ` Jonas Heinrich
@ 2013-02-23 21:54 ` H. Peter Anvin
[not found] ` <20130320143257.GA473@onny>
0 siblings, 1 reply; 30+ messages in thread
From: H. Peter Anvin @ 2013-02-23 21:54 UTC (permalink / raw)
To: Jonas Heinrich
Cc: len.brown, pavel, tglx, mingo, x86, rjw, linux-kernel, linux-pm
On 02/23/2013 05:18 AM, Jonas Heinrich wrote:
> Hi,
> thank you for your replay and the effort you invest in helping me out
> with this problem.
> Today, I further debuged the problem and reverted this part of your commit
> (without understanding the actual code):
>
Hi, that commit is indeed buggy, but it has already been fixed; commit
1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e contains the fix.
So to bisect anything between 73201dbec64aebf6b0dca855b523f437972dc7bb
and 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e in a meaningful way you
will have to apply 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e on top.
If 73201dbec64aebf6b0dca855b523f437972dc7b with
1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e on top fails whereas the
previous one does, then that is very interesting and something we can
work with.
-hpa
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
[not found] ` <20130320143257.GA473@onny>
@ 2013-05-01 17:01 ` Jonas Heinrich
2013-05-01 17:33 ` H. Peter Anvin
0 siblings, 1 reply; 30+ messages in thread
From: Jonas Heinrich @ 2013-05-01 17:01 UTC (permalink / raw)
To: H. Peter Anvin, len.brown, pavel, tglx, mingo, x86, rjw
Cc: linux-kernel, linux-pm
[-- Attachment #1.1: Type: text/plain, Size: 3372 bytes --]
Hello,
I tried the newest kernel, 3.9 today but the bug is still present.
Applying the attached patch solves the bug for me.
Best regards,
Jonas Heinrich
On 03-20 14:32, Jonas Heinrich wrote:
> Hello Peter,
> sorry for responding that late to your advice ...
>
> On 02-23 13:54, H. Peter Anvin wrote:
> > So to bisect anything between
> > 73201dbec64aebf6b0dca855b523f437972dc7bb and
> > 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e in a meaningful way you
> > will have to apply 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e on top.
>
> Hope I got you right:
>
> git bisect start
> # good: [73201dbec64aebf6b0dca855b523f437972dc7bb] x86, suspend: On
> # wakeup always initialize cr4 and EFER
> git bisect good 73201dbec64aebf6b0dca855b523f437972dc7bb
> # bad: [1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e] x86, suspend: Correct
> # the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # cherry-picking
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # bad: [a4a4fd9c1b2fa3687fa80177d5de7c551851906d] x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad a4a4fd9c1b2fa3687fa80177d5de7c551851906d
> # cherry-picking
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # bad: [be74ee62657cd7a51519946da7c4bedf7695b0da] x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad be74ee62657cd7a51519946da7c4bedf7695b0da
> # cherry-picking
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # bad: [10df153d76caf2464adb076d475c5c3bfce2c584] x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad 10df153d76caf2464adb076d475c5c3bfce2c584
> # cherry-picking
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # bad: [5ccf64462e2ea53f6b446aea61c308f57224ad6c] x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad 5ccf64462e2ea53f6b446aea61c308f57224ad6c
> # cherry-picking
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # bad: [6337a0046893906ef8dba2db30e36d7360101871] x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad 6337a0046893906ef8dba2db30e36d7360101871
> # cherry-picking
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # bad: [49eeaeaf09fde353766ae0cc548c4cef752d90a9] x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad 49eeaeaf09fde353766ae0cc548c4cef752d90a9
> # cherry-picking
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
> # bad: [43d880b7fbaa831d5bab9bd3215d3053f7c69e97] x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
> git bisect bad 43d880b7fbaa831d5bab9bd3215d3053f7c69e97
>
> Well, don't know how to proceed here. As you could see, none of these kernels worked for me.
>
> > If 73201dbec64aebf6b0dca855b523f437972dc7b with
> > 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e on top fails whereas the
> > previous one does, then that is very interesting and something we
> > can work with.
>
> git bisect reset
> git pull
> git checkout 73201dbec64aebf6b0dca855b523f437972dc7b
> git cherry-pick 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e
>
> This kernel also does not work :(
>
> Best regards,
> Jonas Heinrich
[-- Attachment #1.2: suspendfix.patch --]
[-- Type: text/plain, Size: 909 bytes --]
--- a/arch/x86/realmode/rm/wakeup_asm.S 2013-04-29 02:36:01.000000000 +0200
+++ b/arch/x86/realmode/rm/wakeup_asm.S 2013-05-01 11:42:07.359999895 +0200
@@ -93,8 +93,8 @@
/* Restore MISC_ENABLE before entering protected mode, in case
BIOS decided to clear XD_DISABLE during S3. */
- movl pmode_behavior, %edi
- btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %edi
+ movl pmode_behavior, %eax
+ btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax
jnc 1f
movl pmode_misc_en, %eax
@@ -110,15 +110,15 @@
movl pmode_cr3, %eax
movl %eax, %cr3
- btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
- jnc 1f
- movl pmode_cr4, %eax
- movl %eax, %cr4
+ movl pmode_cr4, %ecx
+ jecxz 1f
+ movl %ecx, %cr4
1:
- btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
- jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-01 17:01 ` [Bisected] 3.7-rc1 can't resume (still present in 3.9) Jonas Heinrich
@ 2013-05-01 17:33 ` H. Peter Anvin
2013-05-01 18:51 ` Jonas Heinrich
2013-07-10 20:52 ` Christian Sünkenberg
0 siblings, 2 replies; 30+ messages in thread
From: H. Peter Anvin @ 2013-05-01 17:33 UTC (permalink / raw)
To: Jonas Heinrich
Cc: len.brown, pavel, tglx, mingo, x86, rjw, linux-kernel, linux-pm
On 05/01/2013 10:01 AM, Jonas Heinrich wrote:
> Hello, I tried the newest kernel, 3.9 today but the bug is still
> present. Applying the attached patch solves the bug for me.
>
> Best regards, Jonas Heinrich
Okay... WTF is going on here? Does pmode_behavior just not get set up
correctly? Since it seems you can get it to wake up with your patch,
perhaps we can get read out the value of pmode_behavior and print it...
-hpa
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-01 17:33 ` H. Peter Anvin
@ 2013-05-01 18:51 ` Jonas Heinrich
2013-05-01 18:55 ` H. Peter Anvin
2013-07-10 20:52 ` Christian Sünkenberg
1 sibling, 1 reply; 30+ messages in thread
From: Jonas Heinrich @ 2013-05-01 18:51 UTC (permalink / raw)
To: H. Peter Anvin
Cc: len.brown, pavel, tglx, mingo, x86, rjw, linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 731 bytes --]
Well, you could give me instructions on how to debug this (I'll do
everything ;)) or I could ship you the Thinkpad T43. I guess this would
worth the effort since this bug is somehow critical.
Best regards,
Jonas
On 05-01 10:33, H. Peter Anvin wrote:
> On 05/01/2013 10:01 AM, Jonas Heinrich wrote:
> > Hello, I tried the newest kernel, 3.9 today but the bug is still
> > present. Applying the attached patch solves the bug for me.
> >
> > Best regards, Jonas Heinrich
>
> Okay... WTF is going on here? Does pmode_behavior just not get set up
> correctly? Since it seems you can get it to wake up with your patch,
> perhaps we can get read out the value of pmode_behavior and print it...
>
> -hpa
>
>
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-01 18:51 ` Jonas Heinrich
@ 2013-05-01 18:55 ` H. Peter Anvin
2013-05-02 0:45 ` Rafael J. Wysocki
0 siblings, 1 reply; 30+ messages in thread
From: H. Peter Anvin @ 2013-05-01 18:55 UTC (permalink / raw)
To: Jonas Heinrich
Cc: len.brown, pavel, tglx, mingo, x86, rjw, linux-kernel, linux-pm
On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> Well, you could give me instructions on how to debug this (I'll do
> everything ;)) or I could ship you the Thinkpad T43. I guess this
> would worth the effort since this bug is somehow critical.
>
> Best regards, Jonas
I'll put together a debug patch unless I can trick Rafael into doing
it first...
-hpa
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-01 18:55 ` H. Peter Anvin
@ 2013-05-02 0:45 ` Rafael J. Wysocki
2013-05-02 20:32 ` Jonas Heinrich
0 siblings, 1 reply; 30+ messages in thread
From: Rafael J. Wysocki @ 2013-05-02 0:45 UTC (permalink / raw)
To: H. Peter Anvin, Jonas Heinrich
Cc: len.brown, pavel, tglx, mingo, x86, linux-kernel, linux-pm,
Jarkko Sakkinen
On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > Well, you could give me instructions on how to debug this (I'll do
> > everything ;)) or I could ship you the Thinkpad T43. I guess this
> > would worth the effort since this bug is somehow critical.
> >
> > Best regards, Jonas
>
> I'll put together a debug patch unless I can trick Rafael into doing
> it first...
I'm afraid that code has changed quite a bit since I looked at it last time.
[Jarkko Sakkinen seems to have worked on it lately, CCed.]
Jonas, I wonder what happens if you drop the first hunk of the patch (it just
uses a different register, which shouldn't matter)? Does it still help then?
If so, there are still a few things you can do to it, e.g:
(1) drop the
- btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
- jnc 1f
lines,
(2) drop the
- btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
- jnc 1f
lines,
(3) drop the
+ jecxz 1f
line,
(4) drop the
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
lines and see what the minimal patch needed for things to work again is.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-02 0:45 ` Rafael J. Wysocki
@ 2013-05-02 20:32 ` Jonas Heinrich
2013-05-02 23:29 ` Rafael J. Wysocki
0 siblings, 1 reply; 30+ messages in thread
From: Jonas Heinrich @ 2013-05-02 20:32 UTC (permalink / raw)
To: Rafael J. Wysocki, H. Peter Anvin
Cc: len.brown, pavel, tglx, mingo, x86, linux-kernel, linux-pm,
Jarkko Sakkinen
[-- Attachment #1.1: Type: text/plain, Size: 2551 bytes --]
On 05-02 02:45, Rafael J. Wysocki wrote:
> On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > Well, you could give me instructions on how to debug this (I'll do
> > > everything ;)) or I could ship you the Thinkpad T43. I guess this
> > > would worth the effort since this bug is somehow critical.
> > >
> > > Best regards, Jonas
> >
> > I'll put together a debug patch unless I can trick Rafael into doing
> > it first...
>
> I'm afraid that code has changed quite a bit since I looked at it last time.
> [Jarkko Sakkinen seems to have worked on it lately, CCed.]
>
> Jonas, I wonder what happens if you drop the first hunk of the patch (it just
> uses a different register, which shouldn't matter)? Does it still help then?
Hello Rafel, first of all, thank you for helping me out :)
You're right, the patch still solves the suspend bug, after removing the first
hunk of the patch and applying it (see attachement:
suspendfix_first_hunk_dropped.patch).
>
> If so, there are still a few things you can do to it, e.g:
> (1) drop the
>
> - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> - jnc 1f
>
Still works :) (used suspendfix_1.patch)
> lines,
> (2) drop the
>
> - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> - jnc 1f
>
> lines,
Still works :) (used suspendfix_2.patch)
> (3) drop the
>
> + jecxz 1f
>
Still works :) (used suspendfix_3.patch)
> line,
> (4) drop the
>
> + movl %eax, %ecx
> + orl %edx, %ecx
> + jz 1f
>
At this point, the bug reoccurs (used suspendfix_4.patch)!
But that doesn't mean these lines are the only critical, because the more
minimal patch
@@ -119,6 +119,9 @@
jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
with removing this part
- movl pmode_cr4, %eax
- movl %eax, %cr4
+ movl pmode_cr4, %ecx
+ movl %ecx, %cr4
also doesn't fix the issue (see suspendfix_5.patch).
> lines and see what the minimal patch needed for things to work again is.
>
So the most minimal working patch is suspendfix_3.patch.
> Thanks,
> Rafael
Thank you and best regards,
Jonas
>
>
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
[-- Attachment #1.2: suspendfix_first_hunk_dropped.patch --]
[-- Type: text/plain, Size: 569 bytes --]
--- a/arch/x86/realmode/rm/wakeup_asm.S 2013-04-29 02:36:01.000000000 +0200
+++ b/arch/x86/realmode/rm/wakeup_asm.S 2013-05-01 11:42:07.359999895 +0200
@@ -110,15 +110,15 @@
movl pmode_cr3, %eax
movl %eax, %cr3
- btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
- jnc 1f
- movl pmode_cr4, %eax
- movl %eax, %cr4
+ movl pmode_cr4, %ecx
+ jecxz 1f
+ movl %ecx, %cr4
1:
- btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
- jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
[-- Attachment #1.3: suspendfix_1.patch --]
[-- Type: text/plain, Size: 526 bytes --]
--- a/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 17:20:25.266667541 +0200
+++ b/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 17:22:51.880000874 +0200
@@ -112,13 +112,15 @@
btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
jnc 1f
- movl pmode_cr4, %eax
- movl %eax, %cr4
+ movl pmode_cr4, %ecx
+ jecxz 1f
+ movl %ecx, %cr4
1:
- btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
- jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
[-- Attachment #1.4: suspendfix_2.patch --]
[-- Type: text/plain, Size: 526 bytes --]
--- a/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 17:20:25.266667541 +0200
+++ b/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 18:54:49.176667541 +0200
@@ -112,13 +112,17 @@
btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
jnc 1f
- movl pmode_cr4, %eax
- movl %eax, %cr4
+ movl pmode_cr4, %ecx
+ jecxz 1f
+ movl %ecx, %cr4
1:
btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
[-- Attachment #1.5: suspendfix_3.patch --]
[-- Type: text/plain, Size: 518 bytes --]
--- a/arch/x86/realmode/rm/wakeup_asm.S.org 2013-05-02 17:20:25.266667541 +0200
+++ b/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 19:56:58.083334207 +0200
@@ -112,13 +112,16 @@
btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
jnc 1f
- movl pmode_cr4, %eax
- movl %eax, %cr4
+ movl pmode_cr4, %ecx
+ movl %ecx, %cr4
1:
btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
[-- Attachment #1.6: suspendfix_4.patch --]
[-- Type: text/plain, Size: 374 bytes --]
--- a/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 17:20:25.266667541 +0200
+++ b/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 20:43:40.623334207 +0200
@@ -112,8 +112,8 @@
btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
jnc 1f
- movl pmode_cr4, %eax
- movl %eax, %cr4
+ movl pmode_cr4, %ecx
+ movl %ecx, %cr4
1:
btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
jnc 1f
[-- Attachment #1.7: suspendfix_5.patch --]
[-- Type: text/plain, Size: 311 bytes --]
--- a/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 17:20:25.266667541 +0200
+++ b/arch/x86/realmode/rm/wakeup_asm.S 2013-05-02 21:44:57.973334207 +0200
@@ -119,6 +119,9 @@
jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
movl $MSR_EFER, %ecx
wrmsr
1:
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-02 20:32 ` Jonas Heinrich
@ 2013-05-02 23:29 ` Rafael J. Wysocki
2013-05-03 11:07 ` Jonas Heinrich
0 siblings, 1 reply; 30+ messages in thread
From: Rafael J. Wysocki @ 2013-05-02 23:29 UTC (permalink / raw)
To: Jonas Heinrich
Cc: H. Peter Anvin, len.brown, pavel, tglx, mingo, x86, linux-kernel,
linux-pm, Jarkko Sakkinen
[-- Attachment #1: Type: text/plain, Size: 3072 bytes --]
On Thursday, May 02, 2013 08:32:30 PM Jonas Heinrich wrote:
> On 05-02 02:45, Rafael J. Wysocki wrote:
> > On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > > Well, you could give me instructions on how to debug this (I'll do
> > > > everything ;)) or I could ship you the Thinkpad T43. I guess this
> > > > would worth the effort since this bug is somehow critical.
> > > >
> > > > Best regards, Jonas
> > >
> > > I'll put together a debug patch unless I can trick Rafael into doing
> > > it first...
> >
> > I'm afraid that code has changed quite a bit since I looked at it last time.
> > [Jarkko Sakkinen seems to have worked on it lately, CCed.]
> >
> > Jonas, I wonder what happens if you drop the first hunk of the patch (it just
> > uses a different register, which shouldn't matter)? Does it still help then?
>
> Hello Rafel, first of all, thank you for helping me out :)
> You're right, the patch still solves the suspend bug, after removing the first
> hunk of the patch and applying it (see attachement:
> suspendfix_first_hunk_dropped.patch).
>
> >
> > If so, there are still a few things you can do to it, e.g:
> > (1) drop the
> >
> > - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> > - jnc 1f
> >
>
> Still works :) (used suspendfix_1.patch)
>
> > lines,
> > (2) drop the
> >
> > - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> > - jnc 1f
> >
> > lines,
>
> Still works :) (used suspendfix_2.patch)
>
> > (3) drop the
> >
> > + jecxz 1f
> >
>
> Still works :) (used suspendfix_3.patch)
>
> > line,
> > (4) drop the
> >
> > + movl %eax, %ecx
> > + orl %edx, %ecx
> > + jz 1f
> >
>
> At this point, the bug reoccurs (used suspendfix_4.patch)!
> But that doesn't mean these lines are the only critical, because the more
> minimal patch
>
> @@ -119,6 +119,9 @@
> jnc 1f
> movl pmode_efer, %eax
> movl pmode_efer + 4, %edx
> + movl %eax, %ecx
> + orl %edx, %ecx
> + jz 1f
> movl $MSR_EFER, %ecx
> wrmsr
> 1:
>
>
> with removing this part
>
> - movl pmode_cr4, %eax
> - movl %eax, %cr4
> + movl pmode_cr4, %ecx
> + movl %ecx, %cr4
>
> also doesn't fix the issue (see suspendfix_5.patch).
>
> > lines and see what the minimal patch needed for things to work again is.
> >
>
> So the most minimal working patch is suspendfix_3.patch.
Thanks for doing that detective work!
The only explanation of why this particular patch can help that seems viable to
us at the moment is that we have a memory corruption in the code region modified
by it and the patch simply changes the alignment of the instructions that don't
get corrupted.
It looks like this may be verified by putting a bunch of nops into the region
in question, so can you please check if the attached patch helps too?
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
[-- Attachment #2: i386-resume-crash-debug.patch --]
[-- Type: text/x-patch, Size: 694 bytes --]
---
arch/x86/realmode/rm/wakeup_asm.S | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
Index: linux-pm/arch/x86/realmode/rm/wakeup_asm.S
===================================================================
--- linux-pm.orig/arch/x86/realmode/rm/wakeup_asm.S
+++ linux-pm/arch/x86/realmode/rm/wakeup_asm.S
@@ -117,6 +117,38 @@ ENTRY(wakeup_start)
1:
btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
jnc 1f
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
movl $MSR_EFER, %ecx
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-02 23:29 ` Rafael J. Wysocki
@ 2013-05-03 11:07 ` Jonas Heinrich
2013-05-03 11:37 ` Rafael J. Wysocki
2013-05-03 12:15 ` Jarkko Sakkinen
0 siblings, 2 replies; 30+ messages in thread
From: Jonas Heinrich @ 2013-05-03 11:07 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: H. Peter Anvin, len.brown, pavel, tglx, mingo, x86, linux-kernel,
linux-pm, Jarkko Sakkinen
[-- Attachment #1: Type: text/plain, Size: 3566 bytes --]
On 05-03 01:29, Rafael J. Wysocki wrote:
> On Thursday, May 02, 2013 08:32:30 PM Jonas Heinrich wrote:
> > On 05-02 02:45, Rafael J. Wysocki wrote:
> > > On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > > > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > > > Well, you could give me instructions on how to debug this (I'll do
> > > > > everything ;)) or I could ship you the Thinkpad T43. I guess this
> > > > > would worth the effort since this bug is somehow critical.
> > > > >
> > > > > Best regards, Jonas
> > > >
> > > > I'll put together a debug patch unless I can trick Rafael into doing
> > > > it first...
> > >
> > > I'm afraid that code has changed quite a bit since I looked at it last time.
> > > [Jarkko Sakkinen seems to have worked on it lately, CCed.]
> > >
> > > Jonas, I wonder what happens if you drop the first hunk of the patch (it just
> > > uses a different register, which shouldn't matter)? Does it still help then?
> >
> > Hello Rafel, first of all, thank you for helping me out :)
> > You're right, the patch still solves the suspend bug, after removing the first
> > hunk of the patch and applying it (see attachement:
> > suspendfix_first_hunk_dropped.patch).
> >
> > >
> > > If so, there are still a few things you can do to it, e.g:
> > > (1) drop the
> > >
> > > - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> > > - jnc 1f
> > >
> >
> > Still works :) (used suspendfix_1.patch)
> >
> > > lines,
> > > (2) drop the
> > >
> > > - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> > > - jnc 1f
> > >
> > > lines,
> >
> > Still works :) (used suspendfix_2.patch)
> >
> > > (3) drop the
> > >
> > > + jecxz 1f
> > >
> >
> > Still works :) (used suspendfix_3.patch)
> >
> > > line,
> > > (4) drop the
> > >
> > > + movl %eax, %ecx
> > > + orl %edx, %ecx
> > > + jz 1f
> > >
> >
> > At this point, the bug reoccurs (used suspendfix_4.patch)!
> > But that doesn't mean these lines are the only critical, because the more
> > minimal patch
> >
> > @@ -119,6 +119,9 @@
> > jnc 1f
> > movl pmode_efer, %eax
> > movl pmode_efer + 4, %edx
> > + movl %eax, %ecx
> > + orl %edx, %ecx
> > + jz 1f
> > movl $MSR_EFER, %ecx
> > wrmsr
> > 1:
> >
> >
> > with removing this part
> >
> > - movl pmode_cr4, %eax
> > - movl %eax, %cr4
> > + movl pmode_cr4, %ecx
> > + movl %ecx, %cr4
> >
> > also doesn't fix the issue (see suspendfix_5.patch).
> >
> > > lines and see what the minimal patch needed for things to work again is.
> > >
> >
> > So the most minimal working patch is suspendfix_3.patch.
>
> Thanks for doing that detective work!
>
> The only explanation of why this particular patch can help that seems viable to
> us at the moment is that we have a memory corruption in the code region modified
> by it and the patch simply changes the alignment of the instructions that don't
> get corrupted.
>
> It looks like this may be verified by putting a bunch of nops into the region
> in question, so can you please check if the attached patch helps too?
Unfortunately, your attached patch doesn't seem to fix the bug.
Hope you still have some ideas to address this issue :)
- Jonas
>
> Rafael
>
>
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-03 11:07 ` Jonas Heinrich
@ 2013-05-03 11:37 ` Rafael J. Wysocki
2013-05-28 21:36 ` Rafael J. Wysocki
2013-05-03 12:15 ` Jarkko Sakkinen
1 sibling, 1 reply; 30+ messages in thread
From: Rafael J. Wysocki @ 2013-05-03 11:37 UTC (permalink / raw)
To: Jonas Heinrich
Cc: H. Peter Anvin, len.brown, pavel, tglx, mingo, x86, linux-kernel,
linux-pm, Jarkko Sakkinen
On Friday, May 03, 2013 11:07:05 AM Jonas Heinrich wrote:
> On 05-03 01:29, Rafael J. Wysocki wrote:
> > On Thursday, May 02, 2013 08:32:30 PM Jonas Heinrich wrote:
> > > On 05-02 02:45, Rafael J. Wysocki wrote:
> > > > On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > > > > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > > > > Well, you could give me instructions on how to debug this (I'll do
> > > > > > everything ;)) or I could ship you the Thinkpad T43. I guess this
> > > > > > would worth the effort since this bug is somehow critical.
> > > > > >
> > > > > > Best regards, Jonas
> > > > >
> > > > > I'll put together a debug patch unless I can trick Rafael into doing
> > > > > it first...
> > > >
> > > > I'm afraid that code has changed quite a bit since I looked at it last time.
> > > > [Jarkko Sakkinen seems to have worked on it lately, CCed.]
> > > >
> > > > Jonas, I wonder what happens if you drop the first hunk of the patch (it just
> > > > uses a different register, which shouldn't matter)? Does it still help then?
> > >
> > > Hello Rafel, first of all, thank you for helping me out :)
> > > You're right, the patch still solves the suspend bug, after removing the first
> > > hunk of the patch and applying it (see attachement:
> > > suspendfix_first_hunk_dropped.patch).
> > >
> > > >
> > > > If so, there are still a few things you can do to it, e.g:
> > > > (1) drop the
> > > >
> > > > - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> > > > - jnc 1f
> > > >
> > >
> > > Still works :) (used suspendfix_1.patch)
> > >
> > > > lines,
> > > > (2) drop the
> > > >
> > > > - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> > > > - jnc 1f
> > > >
> > > > lines,
> > >
> > > Still works :) (used suspendfix_2.patch)
> > >
> > > > (3) drop the
> > > >
> > > > + jecxz 1f
> > > >
> > >
> > > Still works :) (used suspendfix_3.patch)
> > >
> > > > line,
> > > > (4) drop the
> > > >
> > > > + movl %eax, %ecx
> > > > + orl %edx, %ecx
> > > > + jz 1f
> > > >
> > >
> > > At this point, the bug reoccurs (used suspendfix_4.patch)!
> > > But that doesn't mean these lines are the only critical, because the more
> > > minimal patch
> > >
> > > @@ -119,6 +119,9 @@
> > > jnc 1f
> > > movl pmode_efer, %eax
> > > movl pmode_efer + 4, %edx
> > > + movl %eax, %ecx
> > > + orl %edx, %ecx
> > > + jz 1f
> > > movl $MSR_EFER, %ecx
> > > wrmsr
> > > 1:
> > >
> > >
> > > with removing this part
> > >
> > > - movl pmode_cr4, %eax
> > > - movl %eax, %cr4
> > > + movl pmode_cr4, %ecx
> > > + movl %ecx, %cr4
> > >
> > > also doesn't fix the issue (see suspendfix_5.patch).
> > >
> > > > lines and see what the minimal patch needed for things to work again is.
> > > >
> > >
> > > So the most minimal working patch is suspendfix_3.patch.
> >
> > Thanks for doing that detective work!
> >
> > The only explanation of why this particular patch can help that seems viable to
> > us at the moment is that we have a memory corruption in the code region modified
> > by it and the patch simply changes the alignment of the instructions that don't
> > get corrupted.
> >
> > It looks like this may be verified by putting a bunch of nops into the region
> > in question, so can you please check if the attached patch helps too?
>
> Unfortunately, your attached patch doesn't seem to fix the bug.
> Hope you still have some ideas to address this issue :)
Well, not really.
We'll need a dump of the wakeup structure from your system I suppose.
I'll try to write a patch to get that over the weekend.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-03 11:07 ` Jonas Heinrich
2013-05-03 11:37 ` Rafael J. Wysocki
@ 2013-05-03 12:15 ` Jarkko Sakkinen
2013-07-08 9:50 ` Jonas Heinrich
1 sibling, 1 reply; 30+ messages in thread
From: Jarkko Sakkinen @ 2013-05-03 12:15 UTC (permalink / raw)
To: Jonas Heinrich
Cc: Rafael J. Wysocki, H. Peter Anvin, len.brown, pavel, tglx, mingo,
x86, linux-kernel, linux-pm
Hi
On Friday, May 03, 2013 02:07:05 PM Jonas Heinrich wrote:
> On 05-03 01:29, Rafael J. Wysocki wrote:
> > On Thursday, May 02, 2013 08:32:30 PM Jonas Heinrich wrote:
> > > On 05-02 02:45, Rafael J. Wysocki wrote:
> > > > On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > > > > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > > > > Well, you could give me instructions on how to debug this (I'll
> > > > > > do everything ;)) or I could ship you the Thinkpad T43. I guess
> > > > > > this would worth the effort since this bug is somehow critical.
> > > > > >
> > > > > > Best regards, Jonas
> > > > >
> > > > > I'll put together a debug patch unless I can trick Rafael into
> > > > > doing it first...
> > > >
> > > > I'm afraid that code has changed quite a bit since I looked at it
> > > > last time. [Jarkko Sakkinen seems to have worked on it lately,
> > > > CCed.]
> > > >
> > > > Jonas, I wonder what happens if you drop the first hunk of the patch
> > > > (it just uses a different register, which shouldn't matter)? Does
> > > > it still help then?
> > >
> > > Hello Rafel, first of all, thank you for helping me out :)
> > > You're right, the patch still solves the suspend bug, after removing
> > > the first hunk of the patch and applying it (see attachement:
> > > suspendfix_first_hunk_dropped.patch).
> > >
> > > > If so, there are still a few things you can do to it, e.g:
> > > > (1) drop the
> > > >
> > > > - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> > > > - jnc 1f
> > >
> > > Still works :) (used suspendfix_1.patch)
> > >
> > > > lines,
> > > > (2) drop the
> > > >
> > > > - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> > > > - jnc 1f
> > > >
> > > > lines,
> > >
> > > Still works :) (used suspendfix_2.patch)
> > >
> > > > (3) drop the
> > > >
> > > > + jecxz 1f
> > >
> > > Still works :) (used suspendfix_3.patch)
> > >
> > > > line,
> > > > (4) drop the
> > > >
> > > > + movl %eax, %ecx
> > > > + orl %edx, %ecx
> > > > + jz 1f
> > >
> > > At this point, the bug reoccurs (used suspendfix_4.patch)!
> > > But that doesn't mean these lines are the only critical, because the
> > > more minimal patch
> > >
> > > @@ -119,6 +119,9 @@
> > >
> > > jnc 1f
> > > movl pmode_efer, %eax
> > > movl pmode_efer + 4, %edx
> > >
> > > + movl %eax, %ecx
> > > + orl %edx, %ecx
> > > + jz 1f
> > >
> > > movl $MSR_EFER, %ecx
> > > wrmsr
> > >
> > > 1:
> > > with removing this part
> > >
> > > - movl pmode_cr4, %eax
> > > - movl %eax, %cr4
> > > + movl pmode_cr4, %ecx
> > > + movl %ecx, %cr4
> > >
> > > also doesn't fix the issue (see suspendfix_5.patch).
> > >
> > > > lines and see what the minimal patch needed for things to work again
> > > > is.
> > >
> > > So the most minimal working patch is suspendfix_3.patch.
> >
> > Thanks for doing that detective work!
> >
> > The only explanation of why this particular patch can help that seems
> > viable to us at the moment is that we have a memory corruption in the
> > code region modified by it and the patch simply changes the alignment of
> > the instructions that don't get corrupted.
> >
> > It looks like this may be verified by putting a bunch of nops into the
> > region in question, so can you please check if the attached patch helps
> > too?
>
> Unfortunately, your attached patch doesn't seem to fix the bug.
> Hope you still have some ideas to address this issue :)
Kind of had to experiment with this since I don't have access to
T43. Did you already try:
- EFER handling only is reverted as it was before 73201dbe.
- CR4 handling only is reverted as it was before 73201dbe.
Thanks.
/Jarkko
>
> - Jonas
>
> > Rafael
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-03 11:37 ` Rafael J. Wysocki
@ 2013-05-28 21:36 ` Rafael J. Wysocki
0 siblings, 0 replies; 30+ messages in thread
From: Rafael J. Wysocki @ 2013-05-28 21:36 UTC (permalink / raw)
To: Jonas Heinrich
Cc: H. Peter Anvin, len.brown, pavel, tglx, mingo, x86, linux-kernel,
linux-pm, Jarkko Sakkinen
On Friday, May 03, 2013 01:37:45 PM Rafael J. Wysocki wrote:
> On Friday, May 03, 2013 11:07:05 AM Jonas Heinrich wrote:
> > On 05-03 01:29, Rafael J. Wysocki wrote:
> > > On Thursday, May 02, 2013 08:32:30 PM Jonas Heinrich wrote:
> > > > On 05-02 02:45, Rafael J. Wysocki wrote:
> > > > > On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > > > > > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > > > > > Well, you could give me instructions on how to debug this (I'll do
> > > > > > > everything ;)) or I could ship you the Thinkpad T43. I guess this
> > > > > > > would worth the effort since this bug is somehow critical.
> > > > > > >
> > > > > > > Best regards, Jonas
> > > > > >
> > > > > > I'll put together a debug patch unless I can trick Rafael into doing
> > > > > > it first...
> > > > >
> > > > > I'm afraid that code has changed quite a bit since I looked at it last time.
> > > > > [Jarkko Sakkinen seems to have worked on it lately, CCed.]
> > > > >
> > > > > Jonas, I wonder what happens if you drop the first hunk of the patch (it just
> > > > > uses a different register, which shouldn't matter)? Does it still help then?
> > > >
> > > > Hello Rafel, first of all, thank you for helping me out :)
> > > > You're right, the patch still solves the suspend bug, after removing the first
> > > > hunk of the patch and applying it (see attachement:
> > > > suspendfix_first_hunk_dropped.patch).
> > > >
> > > > >
> > > > > If so, there are still a few things you can do to it, e.g:
> > > > > (1) drop the
> > > > >
> > > > > - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> > > > > - jnc 1f
> > > > >
> > > >
> > > > Still works :) (used suspendfix_1.patch)
> > > >
> > > > > lines,
> > > > > (2) drop the
> > > > >
> > > > > - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> > > > > - jnc 1f
> > > > >
> > > > > lines,
> > > >
> > > > Still works :) (used suspendfix_2.patch)
> > > >
> > > > > (3) drop the
> > > > >
> > > > > + jecxz 1f
> > > > >
> > > >
> > > > Still works :) (used suspendfix_3.patch)
> > > >
> > > > > line,
> > > > > (4) drop the
> > > > >
> > > > > + movl %eax, %ecx
> > > > > + orl %edx, %ecx
> > > > > + jz 1f
> > > > >
> > > >
> > > > At this point, the bug reoccurs (used suspendfix_4.patch)!
> > > > But that doesn't mean these lines are the only critical, because the more
> > > > minimal patch
> > > >
> > > > @@ -119,6 +119,9 @@
> > > > jnc 1f
> > > > movl pmode_efer, %eax
> > > > movl pmode_efer + 4, %edx
> > > > + movl %eax, %ecx
> > > > + orl %edx, %ecx
> > > > + jz 1f
> > > > movl $MSR_EFER, %ecx
> > > > wrmsr
> > > > 1:
> > > >
> > > >
> > > > with removing this part
> > > >
> > > > - movl pmode_cr4, %eax
> > > > - movl %eax, %cr4
> > > > + movl pmode_cr4, %ecx
> > > > + movl %ecx, %cr4
> > > >
> > > > also doesn't fix the issue (see suspendfix_5.patch).
> > > >
> > > > > lines and see what the minimal patch needed for things to work again is.
> > > > >
> > > >
> > > > So the most minimal working patch is suspendfix_3.patch.
> > >
> > > Thanks for doing that detective work!
> > >
> > > The only explanation of why this particular patch can help that seems viable to
> > > us at the moment is that we have a memory corruption in the code region modified
> > > by it and the patch simply changes the alignment of the instructions that don't
> > > get corrupted.
> > >
> > > It looks like this may be verified by putting a bunch of nops into the region
> > > in question, so can you please check if the attached patch helps too?
> >
> > Unfortunately, your attached patch doesn't seem to fix the bug.
> > Hope you still have some ideas to address this issue :)
>
> Well, not really.
>
> We'll need a dump of the wakeup structure from your system I suppose.
> I'll try to write a patch to get that over the weekend.
Can you try 3.10-rc3 by the way? There is a fix in there that *might* make
a difference (although the odds are quite significant).
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-03 12:15 ` Jarkko Sakkinen
@ 2013-07-08 9:50 ` Jonas Heinrich
2013-07-08 13:05 ` Rafael J. Wysocki
0 siblings, 1 reply; 30+ messages in thread
From: Jonas Heinrich @ 2013-07-08 9:50 UTC (permalink / raw)
To: Jarkko Sakkinen
Cc: Rafael J. Wysocki, H. Peter Anvin, len.brown, pavel, tglx, mingo,
x86, linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 4466 bytes --]
On 05-03 15:15, Jarkko Sakkinen wrote:
> Hi
>
> On Friday, May 03, 2013 02:07:05 PM Jonas Heinrich wrote:
> > On 05-03 01:29, Rafael J. Wysocki wrote:
> > > On Thursday, May 02, 2013 08:32:30 PM Jonas Heinrich wrote:
> > > > On 05-02 02:45, Rafael J. Wysocki wrote:
> > > > > On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > > > > > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > > > > > Well, you could give me instructions on how to debug this (I'll
> > > > > > > do everything ;)) or I could ship you the Thinkpad T43. I guess
> > > > > > > this would worth the effort since this bug is somehow critical.
> > > > > > >
> > > > > > > Best regards, Jonas
> > > > > >
> > > > > > I'll put together a debug patch unless I can trick Rafael into
> > > > > > doing it first...
> > > > >
> > > > > I'm afraid that code has changed quite a bit since I looked at it
> > > > > last time. [Jarkko Sakkinen seems to have worked on it lately,
> > > > > CCed.]
> > > > >
> > > > > Jonas, I wonder what happens if you drop the first hunk of the patch
> > > > > (it just uses a different register, which shouldn't matter)? Does
> > > > > it still help then?
> > > >
> > > > Hello Rafel, first of all, thank you for helping me out :)
> > > > You're right, the patch still solves the suspend bug, after removing
> > > > the first hunk of the patch and applying it (see attachement:
> > > > suspendfix_first_hunk_dropped.patch).
> > > >
> > > > > If so, there are still a few things you can do to it, e.g:
> > > > > (1) drop the
> > > > >
> > > > > - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> > > > > - jnc 1f
> > > >
> > > > Still works :) (used suspendfix_1.patch)
> > > >
> > > > > lines,
> > > > > (2) drop the
> > > > >
> > > > > - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> > > > > - jnc 1f
> > > > >
> > > > > lines,
> > > >
> > > > Still works :) (used suspendfix_2.patch)
> > > >
> > > > > (3) drop the
> > > > >
> > > > > + jecxz 1f
> > > >
> > > > Still works :) (used suspendfix_3.patch)
> > > >
> > > > > line,
> > > > > (4) drop the
> > > > >
> > > > > + movl %eax, %ecx
> > > > > + orl %edx, %ecx
> > > > > + jz 1f
> > > >
> > > > At this point, the bug reoccurs (used suspendfix_4.patch)!
> > > > But that doesn't mean these lines are the only critical, because the
> > > > more minimal patch
> > > >
> > > > @@ -119,6 +119,9 @@
> > > >
> > > > jnc 1f
> > > > movl pmode_efer, %eax
> > > > movl pmode_efer + 4, %edx
> > > >
> > > > + movl %eax, %ecx
> > > > + orl %edx, %ecx
> > > > + jz 1f
> > > >
> > > > movl $MSR_EFER, %ecx
> > > > wrmsr
> > > >
> > > > 1:
> > > > with removing this part
> > > >
> > > > - movl pmode_cr4, %eax
> > > > - movl %eax, %cr4
> > > > + movl pmode_cr4, %ecx
> > > > + movl %ecx, %cr4
> > > >
> > > > also doesn't fix the issue (see suspendfix_5.patch).
> > > >
> > > > > lines and see what the minimal patch needed for things to work again
> > > > > is.
> > > >
> > > > So the most minimal working patch is suspendfix_3.patch.
> > >
> > > Thanks for doing that detective work!
> > >
> > > The only explanation of why this particular patch can help that seems
> > > viable to us at the moment is that we have a memory corruption in the
> > > code region modified by it and the patch simply changes the alignment of
> > > the instructions that don't get corrupted.
> > >
> > > It looks like this may be verified by putting a bunch of nops into the
> > > region in question, so can you please check if the attached patch helps
> > > too?
> >
> > Unfortunately, your attached patch doesn't seem to fix the bug.
> > Hope you still have some ideas to address this issue :)
>
> Kind of had to experiment with this since I don't have access to
> T43. Did you already try:
>
> - EFER handling only is reverted as it was before 73201dbe.
> - CR4 handling only is reverted as it was before 73201dbe.
Hi Jarkko,
thank you for your response!
Can you please be more specific about that instruction? I don't really
know what to do, sorry :/
@Rafael: Bug still present in kernel 3.10 final :(
- Jonas
>
> Thanks.
>
> /Jarkko
>
> >
> > - Jonas
> >
> > > Rafael
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-07-08 9:50 ` Jonas Heinrich
@ 2013-07-08 13:05 ` Rafael J. Wysocki
2013-07-15 21:11 ` H. Peter Anvin
0 siblings, 1 reply; 30+ messages in thread
From: Rafael J. Wysocki @ 2013-07-08 13:05 UTC (permalink / raw)
To: Jonas Heinrich
Cc: Jarkko Sakkinen, H. Peter Anvin, len.brown, pavel, tglx, mingo,
x86, linux-kernel, linux-pm
On Monday, July 08, 2013 09:50:43 AM Jonas Heinrich wrote:
> On 05-03 15:15, Jarkko Sakkinen wrote:
> > Hi
> >
> > On Friday, May 03, 2013 02:07:05 PM Jonas Heinrich wrote:
> > > On 05-03 01:29, Rafael J. Wysocki wrote:
> > > > On Thursday, May 02, 2013 08:32:30 PM Jonas Heinrich wrote:
> > > > > On 05-02 02:45, Rafael J. Wysocki wrote:
> > > > > > On Wednesday, May 01, 2013 11:55:10 AM H. Peter Anvin wrote:
> > > > > > > On 05/01/2013 11:51 AM, Jonas Heinrich wrote:
> > > > > > > > Well, you could give me instructions on how to debug this (I'll
> > > > > > > > do everything ;)) or I could ship you the Thinkpad T43. I guess
> > > > > > > > this would worth the effort since this bug is somehow critical.
> > > > > > > >
> > > > > > > > Best regards, Jonas
> > > > > > >
> > > > > > > I'll put together a debug patch unless I can trick Rafael into
> > > > > > > doing it first...
> > > > > >
> > > > > > I'm afraid that code has changed quite a bit since I looked at it
> > > > > > last time. [Jarkko Sakkinen seems to have worked on it lately,
> > > > > > CCed.]
> > > > > >
> > > > > > Jonas, I wonder what happens if you drop the first hunk of the patch
> > > > > > (it just uses a different register, which shouldn't matter)? Does
> > > > > > it still help then?
> > > > >
> > > > > Hello Rafel, first of all, thank you for helping me out :)
> > > > > You're right, the patch still solves the suspend bug, after removing
> > > > > the first hunk of the patch and applying it (see attachement:
> > > > > suspendfix_first_hunk_dropped.patch).
> > > > >
> > > > > > If so, there are still a few things you can do to it, e.g:
> > > > > > (1) drop the
> > > > > >
> > > > > > - btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
> > > > > > - jnc 1f
> > > > >
> > > > > Still works :) (used suspendfix_1.patch)
> > > > >
> > > > > > lines,
> > > > > > (2) drop the
> > > > > >
> > > > > > - btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
> > > > > > - jnc 1f
> > > > > >
> > > > > > lines,
> > > > >
> > > > > Still works :) (used suspendfix_2.patch)
> > > > >
> > > > > > (3) drop the
> > > > > >
> > > > > > + jecxz 1f
> > > > >
> > > > > Still works :) (used suspendfix_3.patch)
> > > > >
> > > > > > line,
> > > > > > (4) drop the
> > > > > >
> > > > > > + movl %eax, %ecx
> > > > > > + orl %edx, %ecx
> > > > > > + jz 1f
> > > > >
> > > > > At this point, the bug reoccurs (used suspendfix_4.patch)!
> > > > > But that doesn't mean these lines are the only critical, because the
> > > > > more minimal patch
> > > > >
> > > > > @@ -119,6 +119,9 @@
> > > > >
> > > > > jnc 1f
> > > > > movl pmode_efer, %eax
> > > > > movl pmode_efer + 4, %edx
> > > > >
> > > > > + movl %eax, %ecx
> > > > > + orl %edx, %ecx
> > > > > + jz 1f
> > > > >
> > > > > movl $MSR_EFER, %ecx
> > > > > wrmsr
> > > > >
> > > > > 1:
> > > > > with removing this part
> > > > >
> > > > > - movl pmode_cr4, %eax
> > > > > - movl %eax, %cr4
> > > > > + movl pmode_cr4, %ecx
> > > > > + movl %ecx, %cr4
> > > > >
> > > > > also doesn't fix the issue (see suspendfix_5.patch).
> > > > >
> > > > > > lines and see what the minimal patch needed for things to work again
> > > > > > is.
> > > > >
> > > > > So the most minimal working patch is suspendfix_3.patch.
> > > >
> > > > Thanks for doing that detective work!
> > > >
> > > > The only explanation of why this particular patch can help that seems
> > > > viable to us at the moment is that we have a memory corruption in the
> > > > code region modified by it and the patch simply changes the alignment of
> > > > the instructions that don't get corrupted.
> > > >
> > > > It looks like this may be verified by putting a bunch of nops into the
> > > > region in question, so can you please check if the attached patch helps
> > > > too?
> > >
> > > Unfortunately, your attached patch doesn't seem to fix the bug.
> > > Hope you still have some ideas to address this issue :)
> >
> > Kind of had to experiment with this since I don't have access to
> > T43. Did you already try:
> >
> > - EFER handling only is reverted as it was before 73201dbe.
> > - CR4 handling only is reverted as it was before 73201dbe.
> Hi Jarkko,
> thank you for your response!
> Can you please be more specific about that instruction? I don't really
> know what to do, sorry :/
>
> @Rafael: Bug still present in kernel 3.10 final :(
That's because no one knows how to fix it. Actually, we don't even know
what the root cause of it is. Sorry about that.
Are you still able to make things work again by reverting the commit you
bisected to?
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-05-01 17:33 ` H. Peter Anvin
2013-05-01 18:51 ` Jonas Heinrich
@ 2013-07-10 20:52 ` Christian Sünkenberg
2013-07-10 23:57 ` H. Peter Anvin
` (2 more replies)
1 sibling, 3 replies; 30+ messages in thread
From: Christian Sünkenberg @ 2013-07-10 20:52 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Jonas Heinrich, len.brown, pavel, tglx, mingo, x86, rjw,
linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 1265 bytes --]
Hello,
On 05/01/2013 07:33 PM, H. Peter Anvin wrote:
> On 05/01/2013 10:01 AM, Jonas Heinrich wrote:
>> Hello, I tried the newest kernel, 3.9 today but the bug is still
>> present. Applying the attached patch solves the bug for me.
>>
>> Best regards, Jonas Heinrich
>
> Okay... WTF is going on here? Does pmode_behavior just not get set up
> correctly? Since it seems you can get it to wake up with your patch,
> perhaps we can get read out the value of pmode_behavior and print it...
indeed, arch/x86/kernel/acpi/sleep.c tries an rdmsr_safe(MSR_EFER, ...)
and sets WAKEUP_BEHAVIOR_RESTORE_EFER bit on success, however,
on 90 nm Pentium M (Family 6, Model 13), reading an invalid MSR
is not guaranteed to trap, see Erratum X4 in "Intel® Pentium® M
Processor on 90 nm Process with 2-MB L2 Cache and Intel® Processor A100
and A110 on 90 nm process with 512-KB L2 Cache Specification Update".
On Jonas' T43, which has an affected Pentium M without EFER,
rdmsr_safe(MSR_EFER, ...) succeeds and WAKEUP_BEHAVIOR_RESTORE_EFER
gets set, while on resume the corresponding wrmsr traps and thus resume
fails.
The pre-3.7 code snippet incidentally catched this by not restoring
EFER when it would be restored to all 0s.
HTH,
Christian
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5002 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-07-10 20:52 ` Christian Sünkenberg
@ 2013-07-10 23:57 ` H. Peter Anvin
2013-07-12 23:36 ` Christian Sünkenberg
2013-07-13 3:21 ` [tip:x86/urgent] x86, suspend: Handle CPUs which fail to #GP on RDMSR tip-bot for H. Peter Anvin
2013-07-15 20:58 ` tip-bot for H. Peter Anvin
2 siblings, 1 reply; 30+ messages in thread
From: H. Peter Anvin @ 2013-07-10 23:57 UTC (permalink / raw)
To: Christian Sünkenberg
Cc: Jonas Heinrich, len.brown, pavel, tglx, mingo, x86, rjw,
linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 1463 bytes --]
On 07/10/2013 01:52 PM, Christian Sünkenberg wrote:
> Hello,
>
> On 05/01/2013 07:33 PM, H. Peter Anvin wrote:
>> On 05/01/2013 10:01 AM, Jonas Heinrich wrote:
>>> Hello, I tried the newest kernel, 3.9 today but the bug is still
>>> present. Applying the attached patch solves the bug for me.
>>>
>>> Best regards, Jonas Heinrich
>>
>> Okay... WTF is going on here? Does pmode_behavior just not get set up
>> correctly? Since it seems you can get it to wake up with your patch,
>> perhaps we can get read out the value of pmode_behavior and print it...
>
> indeed, arch/x86/kernel/acpi/sleep.c tries an rdmsr_safe(MSR_EFER, ...)
> and sets WAKEUP_BEHAVIOR_RESTORE_EFER bit on success, however,
> on 90 nm Pentium M (Family 6, Model 13), reading an invalid MSR
> is not guaranteed to trap, see Erratum X4 in "Intel® Pentium® M
> Processor on 90 nm Process with 2-MB L2 Cache and Intel® Processor A100
> and A110 on 90 nm process with 512-KB L2 Cache Specification Update".
> On Jonas' T43, which has an affected Pentium M without EFER,
> rdmsr_safe(MSR_EFER, ...) succeeds and WAKEUP_BEHAVIOR_RESTORE_EFER
> gets set, while on resume the corresponding wrmsr traps and thus resume
> fails.
>
> The pre-3.7 code snippet incidentally catched this by not restoring
> EFER when it would be restored to all 0s.
>
That does seem like a reasonable explanation.
Does this patch fix the problem? (Comment blatantly ripped off from
your email message.)
-hpa
[-- Attachment #2: diff --]
[-- Type: text/plain, Size: 1003 bytes --]
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index b44577b..927c5ce 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -48,9 +48,20 @@ int acpi_suspend_lowlevel(void)
#ifndef CONFIG_64BIT
native_store_gdt((struct desc_ptr *)&header->pmode_gdt);
+ /*
+ * We have to check that we can write back the value, and not
+ * just read it. At least on 90 nm Pentium M (Family 6, Model
+ * 13), reading an invalid MSR is not guaranteed to trap, see
+ * Erratum X4 in "Intel Pentium M Processor on 90 nm Process
+ * with 2-MB L2 Cache and Intel® Processor A100 and A110 on 90
+ * nm process with 512-KB L2 Cache Specification Update".
+ */
if (!rdmsr_safe(MSR_EFER,
&header->pmode_efer_low,
- &header->pmode_efer_high))
+ &header->pmode_efer_high) &&
+ !wrmsr_safe(MSR_EFER,
+ header->pmode_efer_low,
+ header->pmode_efer_high))
header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER);
#endif /* !CONFIG_64BIT */
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-07-10 23:57 ` H. Peter Anvin
@ 2013-07-12 23:36 ` Christian Sünkenberg
2013-07-12 23:45 ` H. Peter Anvin
0 siblings, 1 reply; 30+ messages in thread
From: Christian Sünkenberg @ 2013-07-12 23:36 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Jonas Heinrich, len.brown, pavel, tglx, mingo, x86, rjw,
linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 2391 bytes --]
Hello,
On 07/11/2013 01:57 AM, H. Peter Anvin wrote:
> On 07/10/2013 01:52 PM, Christian Sünkenberg wrote:
>> Hello,
>>
>> On 05/01/2013 07:33 PM, H. Peter Anvin wrote:
>>> On 05/01/2013 10:01 AM, Jonas Heinrich wrote:
>>>> Hello, I tried the newest kernel, 3.9 today but the bug is still
>>>> present. Applying the attached patch solves the bug for me.
>>>>
>>>> Best regards, Jonas Heinrich
>>>
>>> Okay... WTF is going on here? Does pmode_behavior just not get set up
>>> correctly? Since it seems you can get it to wake up with your patch,
>>> perhaps we can get read out the value of pmode_behavior and print it...
>>
>> indeed, arch/x86/kernel/acpi/sleep.c tries an rdmsr_safe(MSR_EFER, ...)
>> and sets WAKEUP_BEHAVIOR_RESTORE_EFER bit on success, however,
>> on 90 nm Pentium M (Family 6, Model 13), reading an invalid MSR
>> is not guaranteed to trap, see Erratum X4 in "Intel® Pentium® M
>> Processor on 90 nm Process with 2-MB L2 Cache and Intel® Processor A100
>> and A110 on 90 nm process with 512-KB L2 Cache Specification Update".
>> On Jonas' T43, which has an affected Pentium M without EFER,
>> rdmsr_safe(MSR_EFER, ...) succeeds and WAKEUP_BEHAVIOR_RESTORE_EFER
>> gets set, while on resume the corresponding wrmsr traps and thus resume
>> fails.
>>
>> The pre-3.7 code snippet incidentally catched this by not restoring
>> EFER when it would be restored to all 0s.
>>
>
> That does seem like a reasonable explanation.
>
> Does this patch fix the problem? (Comment blatantly ripped off from
> your email message.)
Jonas tried your patch and it fixes suspend/resume on his T43, although
IMHO the safest approach would be to just add an exception for
Vendor==Intel && Family==6 && Model==13, or more generally Vendor==Intel
&& !supports_long_mode, as the same erratum also warns about wrmsr
possibly not triggering a GP either.
Anyways, at least on this specific MSR with the Pentium M Jonas tested,
it behaved correctly on every try, so I'd say your patch does the trick,
thank you very much!
As a side note, I found a similar erratum #33 in "Pentium® Processor
Specification Update" for Intel P54C (Family 5, Model 2), which would,
supposed there are P54C systems with ACPI sleep/resume support, result
in MSR 0 (P5_MC_ADDR) to be saved and restored instead of nonexistent EFER.
Kind regards,
Christian
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5002 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-07-12 23:36 ` Christian Sünkenberg
@ 2013-07-12 23:45 ` H. Peter Anvin
0 siblings, 0 replies; 30+ messages in thread
From: H. Peter Anvin @ 2013-07-12 23:45 UTC (permalink / raw)
To: Christian Sünkenberg
Cc: Jonas Heinrich, len.brown, pavel, tglx, mingo, x86, rjw,
linux-kernel, linux-pm
On 07/12/2013 04:36 PM, Christian Sünkenberg wrote:
>
> Jonas tried your patch and it fixes suspend/resume on his T43, although
> IMHO the safest approach would be to just add an exception for
> Vendor==Intel && Family==6 && Model==13, or more generally Vendor==Intel
> && !supports_long_mode, as the same erratum also warns about wrmsr
> possibly not triggering a GP either.
> Anyways, at least on this specific MSR with the Pentium M Jonas tested,
> it behaved correctly on every try, so I'd say your patch does the trick,
> thank you very much!
>
Using vendor matches is not really a great way to deal with things that
can better be handled analytically.
If WRMSR doesn't fault, it is not a problem...
> As a side note, I found a similar erratum #33 in "Pentium® Processor
> Specification Update" for Intel P54C (Family 5, Model 2), which would,
> supposed there are P54C systems with ACPI sleep/resume support, result
> in MSR 0 (P5_MC_ADDR) to be saved and restored instead of nonexistent EFER.
Doesn't really matter, as we'd only read that one after an #MC.
-hpa
^ permalink raw reply [flat|nested] 30+ messages in thread
* [tip:x86/urgent] x86, suspend: Handle CPUs which fail to #GP on RDMSR
2013-07-10 20:52 ` Christian Sünkenberg
2013-07-10 23:57 ` H. Peter Anvin
@ 2013-07-13 3:21 ` tip-bot for H. Peter Anvin
2013-07-15 20:58 ` tip-bot for H. Peter Anvin
2 siblings, 0 replies; 30+ messages in thread
From: tip-bot for H. Peter Anvin @ 2013-07-13 3:21 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, onny, tglx, hpa, rjw, christian.suenkenberg
Commit-ID: 3a783f6e39cc6c89da8846312f29ca47affaa470
Gitweb: http://git.kernel.org/tip/3a783f6e39cc6c89da8846312f29ca47affaa470
Author: H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Fri, 12 Jul 2013 16:48:12 -0700
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 12 Jul 2013 16:48:12 -0700
x86, suspend: Handle CPUs which fail to #GP on RDMSR
There are CPUs which have errata causing RDMSR of a nonexistent MSR to
not fault. We would then try to WRMSR to restore the value of that
MSR, causing a crash. Specifically, some Pentium M variants would
have this problem trying to save and restore the non-existent EFER,
causing a crash on resume.
Work around this by making sure we can write back the result at
suspend time.
Huge thanks to Christian Sünkenberg for finding the offending erratum
that finally deciphered the mystery.
Reported-and-tested-by: Johan Heinrich <onny@project-insanity.org>
Debugged-by: Christian Sünkenberg <christian.suenkenberg@student.kit.edu>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Link: http://lkml.kernel.org/r/51DDC972.3010005@student.kit.edu
Cc: <stable@vger.kernel.org> # v3.7+
---
arch/x86/kernel/acpi/sleep.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 2a34aaf..3312010 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -48,9 +48,20 @@ int x86_acpi_suspend_lowlevel(void)
#ifndef CONFIG_64BIT
native_store_gdt((struct desc_ptr *)&header->pmode_gdt);
+ /*
+ * We have to check that we can write back the value, and not
+ * just read it. At least on 90 nm Pentium M (Family 6, Model
+ * 13), reading an invalid MSR is not guaranteed to trap, see
+ * Erratum X4 in "Intel Pentium M Processor on 90 nm Process
+ * with 2-MB L2 Cache and Intel® Processor A100 and A110 on 90
+ * nm process with 512-KB L2 Cache Specification Update".
+ */
if (!rdmsr_safe(MSR_EFER,
&header->pmode_efer_low,
- &header->pmode_efer_high))
+ &header->pmode_efer_high) &&
+ !wrmsr_safe(MSR_EFER,
+ header->pmode_efer_low,
+ header->pmode_efer_high))
header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER);
#endif /* !CONFIG_64BIT */
@@ -61,7 +72,10 @@ int x86_acpi_suspend_lowlevel(void)
}
if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
&header->pmode_misc_en_low,
- &header->pmode_misc_en_high))
+ &header->pmode_misc_en_high) &&
+ !wrmsr_safe(MSR_IA32_MISC_ENABLE,
+ header->pmode_misc_en_low,
+ header->pmode_misc_en_high))
header->pmode_behavior |=
(1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
header->realmode_flags = acpi_realmode_flags;
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [tip:x86/urgent] x86, suspend: Handle CPUs which fail to #GP on RDMSR
2013-07-10 20:52 ` Christian Sünkenberg
2013-07-10 23:57 ` H. Peter Anvin
2013-07-13 3:21 ` [tip:x86/urgent] x86, suspend: Handle CPUs which fail to #GP on RDMSR tip-bot for H. Peter Anvin
@ 2013-07-15 20:58 ` tip-bot for H. Peter Anvin
2 siblings, 0 replies; 30+ messages in thread
From: tip-bot for H. Peter Anvin @ 2013-07-15 20:58 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, onny, tglx, hpa, rjw, christian.suenkenberg
Commit-ID: 5ff560fd48d5b3d82fa0c3aff625c9da1a301911
Gitweb: http://git.kernel.org/tip/5ff560fd48d5b3d82fa0c3aff625c9da1a301911
Author: H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Fri, 12 Jul 2013 16:48:12 -0700
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Mon, 15 Jul 2013 13:50:54 -0700
x86, suspend: Handle CPUs which fail to #GP on RDMSR
There are CPUs which have errata causing RDMSR of a nonexistent MSR to
not fault. We would then try to WRMSR to restore the value of that
MSR, causing a crash. Specifically, some Pentium M variants would
have this problem trying to save and restore the non-existent EFER,
causing a crash on resume.
Work around this by making sure we can write back the result at
suspend time.
Huge thanks to Christian Sünkenberg for finding the offending erratum
that finally deciphered the mystery.
Reported-and-tested-by: Johan Heinrich <onny@project-insanity.org>
Debugged-by: Christian Sünkenberg <christian.suenkenberg@student.kit.edu>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Link: http://lkml.kernel.org/r/51DDC972.3010005@student.kit.edu
Cc: <stable@vger.kernel.org> # v3.7+
---
arch/x86/kernel/acpi/sleep.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 2a34aaf..3312010 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -48,9 +48,20 @@ int x86_acpi_suspend_lowlevel(void)
#ifndef CONFIG_64BIT
native_store_gdt((struct desc_ptr *)&header->pmode_gdt);
+ /*
+ * We have to check that we can write back the value, and not
+ * just read it. At least on 90 nm Pentium M (Family 6, Model
+ * 13), reading an invalid MSR is not guaranteed to trap, see
+ * Erratum X4 in "Intel Pentium M Processor on 90 nm Process
+ * with 2-MB L2 Cache and Intel® Processor A100 and A110 on 90
+ * nm process with 512-KB L2 Cache Specification Update".
+ */
if (!rdmsr_safe(MSR_EFER,
&header->pmode_efer_low,
- &header->pmode_efer_high))
+ &header->pmode_efer_high) &&
+ !wrmsr_safe(MSR_EFER,
+ header->pmode_efer_low,
+ header->pmode_efer_high))
header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER);
#endif /* !CONFIG_64BIT */
@@ -61,7 +72,10 @@ int x86_acpi_suspend_lowlevel(void)
}
if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
&header->pmode_misc_en_low,
- &header->pmode_misc_en_high))
+ &header->pmode_misc_en_high) &&
+ !wrmsr_safe(MSR_IA32_MISC_ENABLE,
+ header->pmode_misc_en_low,
+ header->pmode_misc_en_high))
header->pmode_behavior |=
(1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
header->realmode_flags = acpi_realmode_flags;
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume (still present in 3.9)
2013-07-08 13:05 ` Rafael J. Wysocki
@ 2013-07-15 21:11 ` H. Peter Anvin
0 siblings, 0 replies; 30+ messages in thread
From: H. Peter Anvin @ 2013-07-15 21:11 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Jonas Heinrich, Jarkko Sakkinen, len.brown, pavel, tglx, mingo,
x86, linux-kernel, linux-pm
On 07/08/2013 06:05 AM, Rafael J. Wysocki wrote:
>
> That's because no one knows how to fix it. Actually, we don't even know
> what the root cause of it is. Sorry about that.
>
> Are you still able to make things work again by reverting the commit you
> bisected to?
>
Well, we know now. Hopefully we should have the fix in 3.11-rc2 and
then on its way to stable.
-hpa
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume
2013-02-17 17:48 [Bisected] 3.7-rc1 can't resume Jonas Heinrich
2013-02-17 20:40 ` Rafael J. Wysocki
@ 2013-02-17 20:52 ` H. Peter Anvin
1 sibling, 0 replies; 30+ messages in thread
From: H. Peter Anvin @ 2013-02-17 20:52 UTC (permalink / raw)
To: Jonas Heinrich, rjw, len.brown, pavel, tglx, mingo, x86
Cc: linux-kernel, linux-pm
T43 is quite old... which might have exposed unique bugs. How reliable is the failure? Even one misidentified commit results in git bisect giving garbage.
Jonas Heinrich <onny@project-insanity.org> wrote:
>Hello,
>since kernel version 3.7-rc1 I can't resume my notebook (Thinkpad T43)
>from suspend2ram anymore.
>
>I started a kernel bisection (see bisection_log in attachement). Also
>see kernel conifg @ attachement.
>
>The culprit commit seems to be:
>- x86, smap: Do not abuse the [f][x]rstor_checking() functions for user
>space
>commit e139e95590dfebab81841bf7a3ac46500f51a47c
>
>Unfortunately, just reverting the commit did not resolved the issue.
>Maybe I did something wrong, I'm not so familiar with this kind of
>kernel bisection.
>
>Best regards,
>Jonas
>
>ps. I'm not yet subscribed to the mailing list so I hope you'll recieve
>this message.
--
Sent from my mobile phone. Please excuse brevity and lack of formatting.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume
2013-02-17 17:48 [Bisected] 3.7-rc1 can't resume Jonas Heinrich
@ 2013-02-17 20:40 ` Rafael J. Wysocki
2013-02-17 20:52 ` H. Peter Anvin
1 sibling, 0 replies; 30+ messages in thread
From: Rafael J. Wysocki @ 2013-02-17 20:40 UTC (permalink / raw)
To: Jonas Heinrich
Cc: hpa, len.brown, pavel, tglx, mingo, x86, linux-kernel, linux-pm
On Sunday, February 17, 2013 05:48:25 PM Jonas Heinrich wrote:
> Hello,
> since kernel version 3.7-rc1 I can't resume my notebook (Thinkpad T43)
> from suspend2ram anymore.
>
> I started a kernel bisection (see bisection_log in attachement). Also
> see kernel conifg @ attachement.
>
> The culprit commit seems to be:
> - x86, smap: Do not abuse the [f][x]rstor_checking() functions for user space
> commit e139e95590dfebab81841bf7a3ac46500f51a47c
Does the commit immediately preceding this one behave correctly?
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [Bisected] 3.7-rc1 can't resume
@ 2013-02-17 17:48 Jonas Heinrich
2013-02-17 20:40 ` Rafael J. Wysocki
2013-02-17 20:52 ` H. Peter Anvin
0 siblings, 2 replies; 30+ messages in thread
From: Jonas Heinrich @ 2013-02-17 17:48 UTC (permalink / raw)
To: hpa, rjw, len.brown, pavel, tglx, mingo, x86; +Cc: linux-kernel, linux-pm
[-- Attachment #1.1: Type: text/plain, Size: 653 bytes --]
Hello,
since kernel version 3.7-rc1 I can't resume my notebook (Thinkpad T43)
from suspend2ram anymore.
I started a kernel bisection (see bisection_log in attachement). Also
see kernel conifg @ attachement.
The culprit commit seems to be:
- x86, smap: Do not abuse the [f][x]rstor_checking() functions for user space
commit e139e95590dfebab81841bf7a3ac46500f51a47c
Unfortunately, just reverting the commit did not resolved the issue.
Maybe I did something wrong, I'm not so familiar with this kind of
kernel bisection.
Best regards,
Jonas
ps. I'm not yet subscribed to the mailing list so I hope you'll recieve
this message.
[-- Attachment #1.2: bisection_log --]
[-- Type: text/plain, Size: 2694 bytes --]
git bisect start
# bad: [ddffeb8c4d0331609ef2581d84de4d763607bd37] Linux 3.7-rc1
git bisect bad ddffeb8c4d0331609ef2581d84de4d763607bd37
# good: [a0d271cbfed1dd50278c6b06bead3d00ba0a88f9] Linux 3.6
git bisect good a0d271cbfed1dd50278c6b06bead3d00ba0a88f9
# bad: [24d7b40a60cf19008334bcbcbd98da374d4d9c64] ARM: OMAP2+: PM: MPU
# DVFS: use generic CPU device for MPU-SS
git bisect bad 24d7b40a60cf19008334bcbcbd98da374d4d9c64
# good: [d9a807461fc8cc0d6ba589ea0730d139122af012] Merge tag 'usb-3.6'
# of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
git bisect good d9a807461fc8cc0d6ba589ea0730d139122af012
# bad: [a20acf99f75e49271381d65db097c9763060a1e8] Merge
# git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
git bisect bad a20acf99f75e49271381d65db097c9763060a1e8
# good: [7e95c548818d2b311090848083277fb907cfb56d] Merge branch
# 'next/dt' into HEAD
git bisect good 7e95c548818d2b311090848083277fb907cfb56d
# bad: [95360fd63606918167a5365b770a6d28d333f0ed] Merge tag 'boards' of
# git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
git bisect bad 95360fd63606918167a5365b770a6d28d333f0ed
# bad: [797b9e5ae93270ec27a1f1ed48cd697d01b2269f] Merge branch
# 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
git bisect bad 797b9e5ae93270ec27a1f1ed48cd697d01b2269f
# bad: [15385dfe7e0fa6866b204dd0d14aec2cc48fc0a7] Merge branch
# 'x86-smap-for-linus' of
# git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect bad 15385dfe7e0fa6866b204dd0d14aec2cc48fc0a7
# good: [367eb2ee8a6f160c369d9afa6732237eeb679467] hwmon:
# (Documentation) Update feature-removal-schedule.txt
git bisect good 367eb2ee8a6f160c369d9afa6732237eeb679467
# good: [40689ac479e6477096b3dbd5a374cfe3970da3a3] Merge tag 'dlm-3.7'
# of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
git bisect good 40689ac479e6477096b3dbd5a374cfe3970da3a3
# bad: [e139e95590dfebab81841bf7a3ac46500f51a47c] x86, smap: Do not
# abuse the [f][x]rstor_checking() functions for user space
git bisect bad e139e95590dfebab81841bf7a3ac46500f51a47c
# good: [a052858fabb376b695f2c125633daa6728e0f284] x86, uaccess: Merge
# prototypes for clear_user/__clear_user
git bisect good a052858fabb376b695f2c125633daa6728e0f284
# good: [40d3cd6695014bf3c44e2ca66b610b18acaf923d] x86, smap: A page
# fault due to SMAP is an oops
git bisect good 40d3cd6695014bf3c44e2ca66b610b18acaf923d
# good: [e59d1b0a24199db01978e6c1e89859eda93ce683] x86-32, smap: Add
# STAC/CLAC instructions to 32-bit kernel entry
git bisect good e59d1b0a24199db01978e6c1e89859eda93ce683
# good: [49b8c695e331c9685e6ffdbf34872509d77c8459] Merge branch
# 'x86/fpu' into x86/smap
git bisect good 49b8c695e331c9685e6ffdbf34872509d77c8459
[-- Attachment #1.3: config --]
[-- Type: text/plain, Size: 127053 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.6.0-11 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-bisect"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_MEMCG_KMEM=y
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_X86_32_IRIS=m
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_XEN_PRIVILEGED_GUEST is not set
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_GX_SUSPMOD=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_OLPC_XO1_PM=y
CONFIG_OLPC_XO1_RTC=y
CONFIG_OLPC_XO1_SCI=y
CONFIG_OLPC_XO15_SCI=y
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_TSI500=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BLA=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_CMTP is not set
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_NCI=m
CONFIG_NFC_HCI=m
# CONFIG_NFC_SHDLC is not set
# CONFIG_NFC_LLCP is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_PN544_NFC is not set
CONFIG_NFC_PN533=m
CONFIG_NFC_WILINK=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_CMA is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_OF_PARTS=m
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_PCMCIA is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=m
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_SM_COMMON=m
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_DOCG4=m
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=2
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
CONFIG_OF_NET=y
CONFIG_OF_MDIO=m
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_MTD=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_NVME=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
CONFIG_INTEL_MID_PTI=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_VMWARE_PVSCSI=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=0
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARASAN_CF=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=m
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_MII=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_LANCE=m
CONFIG_PCNET32=m
CONFIG_DEPCA=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NI65=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=m
# CONFIG_CS89x0_PLATFORM is not set
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_EWRK3=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_AT1700=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_ETH16I=m
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGB_PTP=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_PTP=y
CONFIG_IXGBEVF=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_APRICOT=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_LP486E=m
CONFIG_NI52=m
CONFIG_ZNET=m
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_EL2=m
CONFIG_AC3200=m
CONFIG_PCMCIA_AXNET=m
CONFIG_E2100=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_NE2000=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_ULTRA=m
CONFIG_WD80x3=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
CONFIG_PCH_PTP=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_SEEQ8005=m
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_PLATFORM is not set
CONFIG_STMMAC_PCI=y
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not set
CONFIG_STMMAC_RING=y
# CONFIG_STMMAC_CHAINED is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
# CONFIG_B43_BCMA_EXTRA is not set
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_SDIO_OOB is not set
CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEVICE_TRACING=y
# CONFIG_IWLWIFI_P2P is not set
# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WL12XX_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not set
CONFIG_VMXNET3=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=m
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
# CONFIG_DEVKMEM is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_PCH_UART=m
CONFIG_SERIAL_XILINX_PS_UART=m
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_EG20T=m
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_INTEL_MID=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=m
CONFIG_I2C_PXA_PCI=y
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
# CONFIG_I2C_STUB is not set
CONFIG_SCx200_ACB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_SCH=m
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=m
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_AMD8111=m
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_SODAVILLE is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
CONFIG_GPIO_UCB1400=y
#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_TEST_POWER=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_OLPC=m
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_MC13783_ADC=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_GEODE_WDT=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=m
CONFIG_UCB1400_CORE=m
CONFIG_MFD_LM3533=m
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65217=m
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_ABX500_CORE=y
CONFIG_MFD_CS5535=m
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
CONFIG_LPC_ICH=m
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_WL1273_CORE=m
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_IR_IGUANA=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_KEENE=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
# CONFIG_DVB_CAPTURE_DRIVERS is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_NOUVEAU_DEBUG is not set
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_STUB_POULSBO=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=m
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_LM3533=m
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_PCF50633=m
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_OT200 is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_FONT_AUTOSELECT=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_OPL4_LIB_SEQ=m
CONFIG_SND_SBAWE_SEQ=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT1605=m
CONFIG_SND_AZT2316=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_JAZZ16=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=4096
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO_TPKBD=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WIIMOTE_EXT=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_TUSB6010=m
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_DEBUG is not set
CONFIG_USB_RENESAS_USBHS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
#
# USB Physical Layer drivers
#
CONFIG_USB_ISP1301=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
CONFIG_USB_FUSB300=m
CONFIG_USB_R8A66597=m
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_MV_UDC=m
CONFIG_USB_GADGET_MUSB_HDRC=m
CONFIG_USB_M66592=m
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2272=m
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_GADGET_SUPERSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_AUDIO=m
# CONFIG_GADGET_UAC1 is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_GADGET_TARGET=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA9633=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_LM3556 is not set
CONFIG_LEDS_OT200=m
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MCE_INJ=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_PCF50633=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=m
CONFIG_INTEL_IOATDMA=m
CONFIG_TIMB_DMA=m
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
# CONFIG_VFIO is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_STAGING=y
CONFIG_ET131X=m
CONFIG_SLICOSS=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SKEL=m
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_ACL7225B=m
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL725=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_PCM3730=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=m
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAS16M1=m
CONFIG_COMEDI_DAS08_ISA=m
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_PCMAD=m
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_POC=m
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_ADDI_APCI_035=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2016=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3001=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
# CONFIG_COMEDI_ADL_PCI7230 is not set
# CONFIG_COMEDI_ADL_PCI7296 is not set
# CONFIG_COMEDI_ADL_PCI7432 is not set
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200_PCI=m
CONFIG_COMEDI_AMPLC_PC236_PCI=m
CONFIG_COMEDI_AMPLC_PC263_PCI=m
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
CONFIG_COMEDI_DAS08_PCI=m
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_UNIOXX5=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
# CONFIG_COMEDI_CB_PCIDIO is not set
# CONFIG_COMEDI_CB_PCIMDAS is not set
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_SSV_DNP=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIOCMD=m
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_FC=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_AMPLC_PC263=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_TIO=m
# CONFIG_FB_OLPC_DCON is not set
CONFIG_ASUS_OLED=m
# CONFIG_PANEL is not set
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_RTS_PSTOR=m
# CONFIG_RTS_PSTOR_DEBUG is not set
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
# CONFIG_TRANZPORT is not set
CONFIG_IDE_PHISON=m
CONFIG_LINE6_USB=m
# CONFIG_LINE6_USB_DEBUG is not set
# CONFIG_LINE6_USB_DUMP_CTRL is not set
# CONFIG_LINE6_USB_DUMP_MIDI is not set
# CONFIG_LINE6_USB_DUMP_PCM is not set
# CONFIG_LINE6_USB_RAW is not set
# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
CONFIG_USB_SERIAL_QUATECH2=m
CONFIG_VT6655=m
CONFIG_VT6656=m
CONFIG_DX_SEP=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
CONFIG_ZCACHE=y
CONFIG_ZSMALLOC=y
CONFIG_WLAGS49_H2=m
CONFIG_WLAGS49_H25=m
CONFIG_FB_SM7XX=m
CONFIG_CRYSTALHD=m
CONFIG_FB_XGI=m
CONFIG_ACPI_QUICKSTART=m
CONFIG_USB_ENESTORAGE=m
CONFIG_BCM_WIMAX=m
CONFIG_FT1000=m
CONFIG_FT1000_USB=m
CONFIG_FT1000_PCMCIA=m
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_AS102=m
CONFIG_DVB_CXD2099=m
CONFIG_VIDEO_DT3155=m
CONFIG_DT3155_CCIR=y
CONFIG_DT3155_STREAMING=y
# CONFIG_EASYCAP is not set
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_OV7640=m
CONFIG_VIDEO_GO7007_SAA7113=m
CONFIG_VIDEO_GO7007_SAA7115=m
CONFIG_VIDEO_GO7007_TW9903=m
CONFIG_VIDEO_GO7007_UDA1342=m
CONFIG_VIDEO_GO7007_SONY_TUNER=m
CONFIG_VIDEO_GO7007_TW2804=m
CONFIG_SOLO6X10=m
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
# CONFIG_LIRC_TTUSBIR is not set
CONFIG_LIRC_ZILOG=m
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_PHONE is not set
CONFIG_USB_WPAN_HCD=m
CONFIG_IPACK_BUS=m
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_WIMAX_GDM72XX=m
CONFIG_WIMAX_GDM72XX_QOS=y
CONFIG_WIMAX_GDM72XX_K_MODE=y
CONFIG_WIMAX_GDM72XX_WIMAX2=y
CONFIG_WIMAX_GDM72XX_USB=y
# CONFIG_WIMAX_GDM72XX_SDIO is not set
CONFIG_WIMAX_GDM72XX_USB_PM=y
CONFIG_CSR_WIFI=m
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_TC1100_WMI=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
# CONFIG_SONYPI_COMPAT is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
CONFIG_IBM_RTL=m
CONFIG_XO1_RFKILL=m
CONFIG_XO15_EBOOK=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
CONFIG_VIRT_DRIVERS=y
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_ARIZONA=m
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_LKDTM=m
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_TEST_KSTRTOX=m
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=0
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER_X86=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_586=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
CONFIG_TCM_VHOST=m
CONFIG_LGUEST=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
CONFIG_DDR=y
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume
2012-10-18 14:17 ` H. Peter Anvin
@ 2012-10-19 7:10 ` Cédric Godin
0 siblings, 0 replies; 30+ messages in thread
From: Cédric Godin @ 2012-10-19 7:10 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Rafael J. Wysocki, Len Brown, Pavel Machek, Thomas Gleixner,
Ingo Molnar, x86, Linux Kernel, linux-pm
On 10/18/2012 04:17 PM, H. Peter Anvin wrote:
> On 10/18/2012 05:26 AM, Cédric Godin wrote:
>> Hello,
>>
>> After upgrading my kernel from 3.6 to 3.7-rc1 on my laptop, I can't resume anymore.
>> I bisected the problem to
>>
>
> There is a fix for this already queued up. Please try the attached patch to verify that it fixes your problem.
>
> -hpa
>
Hi Peter,
Indeed it fixes my problem.
Many thanks for the quick answer.
Cedric
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Bisected] 3.7-rc1 can't resume
2012-10-18 12:26 Cédric Godin
@ 2012-10-18 14:17 ` H. Peter Anvin
2012-10-19 7:10 ` Cédric Godin
0 siblings, 1 reply; 30+ messages in thread
From: H. Peter Anvin @ 2012-10-18 14:17 UTC (permalink / raw)
To: Cédric Godin
Cc: Rafael J. Wysocki, Len Brown, Pavel Machek, Thomas Gleixner,
Ingo Molnar, x86, Linux Kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 401 bytes --]
On 10/18/2012 05:26 AM, Cédric Godin wrote:
> Hello,
>
> After upgrading my kernel from 3.6 to 3.7-rc1 on my laptop, I can't resume anymore.
> I bisected the problem to
>
There is a fix for this already queued up. Please try the attached
patch to verify that it fixes your problem.
-hpa
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
[-- Attachment #2: 0001-x86-suspend-Correct-the-restore-of-CR4-EFER-skip-com.patch --]
[-- Type: text/x-patch, Size: 1817 bytes --]
>From 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Mon, 1 Oct 2012 14:34:42 -0700
Subject: [PATCH] x86, suspend: Correct the restore of CR4, EFER; skip
computing EFLAGS.ID
The patch:
73201dbe x86, suspend: On wakeup always initialize cr4 and EFER
... was incorrectly committed in an intermediate (unfinished) form.
- We need to test CF, not ZF, for a bit test with btl.
- We don't actually need to compute the existence of EFLAGS.ID,
since we set a flag at suspend time if CR4 should be restored.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Link: http://lkml.kernel.org/r/1348529239-17943-1-git-send-email-hpa@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/realmode/rm/wakeup_asm.S | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/arch/x86/realmode/rm/wakeup_asm.S b/arch/x86/realmode/rm/wakeup_asm.S
index e56479e..9e7e147 100644
--- a/arch/x86/realmode/rm/wakeup_asm.S
+++ b/arch/x86/realmode/rm/wakeup_asm.S
@@ -74,18 +74,9 @@ ENTRY(wakeup_start)
lidtl wakeup_idt
- /* Clear the EFLAGS but remember if we have EFLAGS.ID */
- movl $X86_EFLAGS_ID, %ecx
- pushl %ecx
- popfl
- pushfl
- popl %edi
+ /* Clear the EFLAGS */
pushl $0
popfl
- pushfl
- popl %edx
- xorl %edx, %edi
- andl %ecx, %edi /* %edi is zero iff CPUID & %cr4 are missing */
/* Check header signature... */
movl signature, %eax
@@ -120,12 +111,12 @@ ENTRY(wakeup_start)
movl %eax, %cr3
btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
- jz 1f
+ jnc 1f
movl pmode_cr4, %eax
movl %eax, %cr4
1:
btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
- jz 1f
+ jnc 1f
movl pmode_efer, %eax
movl pmode_efer + 4, %edx
movl $MSR_EFER, %ecx
--
1.7.11.7
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Bisected] 3.7-rc1 can't resume
@ 2012-10-18 12:26 Cédric Godin
2012-10-18 14:17 ` H. Peter Anvin
0 siblings, 1 reply; 30+ messages in thread
From: Cédric Godin @ 2012-10-18 12:26 UTC (permalink / raw)
To: H. Peter Anvin, Rafael J. Wysocki, Len Brown, Pavel Machek,
Thomas Gleixner, Ingo Molnar, x86
Cc: Linux Kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 4120 bytes --]
Hello,
After upgrading my kernel from 3.6 to 3.7-rc1 on my laptop, I can't resume anymore.
I bisected the problem to
73201dbec64aebf6b0dca855b523f437972dc7bb is the first bad commit
commit 73201dbec64aebf6b0dca855b523f437972dc7bb
Author: H. Peter Anvin <hpa@linux.intel.com>
Date:  Wed Sep 26 15:02:34 2012 -0700
   x86, suspend: On wakeup always initialize cr4 and EFER
  ÂÂ
   We already have a flag word to indicate the existence of MISC_ENABLES,
   so use the same flag word to indicate existence of cr4 and EFER, and
   always restore them if they exist. That way if something passes a
   nonzero value when the value *should* be zero, we will still
   initialize it.
  ÂÂ
   Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
   Cc: Rafael J. Wysocki <rjw@sisk.pl>
   Link: http://lkml.kernel.org/r/1348529239-17943-1-git-send-email-hpa@linux.intel.com
:040000 040000 bb093059ee142f1dd5bd7fe44368ba657701e451 a13e5f81b5a83f783ebeb6317599a7cd6cd4056b M     arch
After reverting it, the laptop resumes OK (except the cpufan is at 100% but that's something else).
Here is the bisect log:
git bisect start
# bad: [ddffeb8c4d0331609ef2581d84de4d763607bd37] Linux 3.7-rc1
git bisect bad ddffeb8c4d0331609ef2581d84de4d763607bd37
# good: [a0d271cbfed1dd50278c6b06bead3d00ba0a88f9] Linux 3.6
git bisect good a0d271cbfed1dd50278c6b06bead3d00ba0a88f9
# bad: [24d7b40a60cf19008334bcbcbd98da374d4d9c64] ARM: OMAP2+: PM: MPU DVFS: use generic CPU device for MPU-SS
git bisect bad 24d7b40a60cf19008334bcbcbd98da374d4d9c64
# good: [d9a807461fc8cc0d6ba589ea0730d139122af012] Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
git bisect good d9a807461fc8cc0d6ba589ea0730d139122af012
# bad: [a20acf99f75e49271381d65db097c9763060a1e8] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
git bisect bad a20acf99f75e49271381d65db097c9763060a1e8
# good: [7e95c548818d2b311090848083277fb907cfb56d] Merge branch 'next/dt' into HEAD
git bisect good 7e95c548818d2b311090848083277fb907cfb56d
# bad: [95360fd63606918167a5365b770a6d28d333f0ed] Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
git bisect bad 95360fd63606918167a5365b770a6d28d333f0ed
# bad: [797b9e5ae93270ec27a1f1ed48cd697d01b2269f] Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
git bisect bad 797b9e5ae93270ec27a1f1ed48cd697d01b2269f
# bad: [15385dfe7e0fa6866b204dd0d14aec2cc48fc0a7] Merge branch 'x86-smap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect bad 15385dfe7e0fa6866b204dd0d14aec2cc48fc0a7
# good: [367eb2ee8a6f160c369d9afa6732237eeb679467] hwmon: (Documentation) Update feature-removal-schedule.txt
git bisect good 367eb2ee8a6f160c369d9afa6732237eeb679467
# good: [40689ac479e6477096b3dbd5a374cfe3970da3a3] Merge tag 'dlm-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
git bisect good 40689ac479e6477096b3dbd5a374cfe3970da3a3
# good: [e139e95590dfebab81841bf7a3ac46500f51a47c] x86, smap: Do not abuse the [f][x]rstor_checking() functions for user space
git bisect good e139e95590dfebab81841bf7a3ac46500f51a47c
# good: [cdeb9b014331af4282be522824e36f3aa33f0671] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
git bisect good cdeb9b014331af4282be522824e36f3aa33f0671
# good: [39c9a4ab2b91bff26801c86e423ef07fb705b3c0] [IA64] xen: Fix return value check in xencomm_vtop()
git bisect good 39c9a4ab2b91bff26801c86e423ef07fb705b3c0
# bad: [73201dbec64aebf6b0dca855b523f437972dc7bb] x86, suspend: On wakeup always initialize cr4 and EFER
git bisect bad 73201dbec64aebf6b0dca855b523f437972dc7bb
# good: [5a5a51db78ef24aa61a4cb2ae36f07f6fa37356d] x86-32: Start out eflags and cr4 clean
git bisect good 5a5a51db78ef24aa61a4cb2ae36f07f6fa37356d
And in attach my config.
If you need more info,just ask.
Cedric
[-- Attachment #2: config-3.7 --]
[-- Type: text/plain, Size: 77427 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.7.0-rc1 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda2"
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2000
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_INGRESS=m
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_CMA is not set
#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=m
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
# CONFIG_IWL3945 is not set
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=m
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PNP=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_LPC_ICH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
CONFIG_SND_HDA_CODEC_ANALOG=y
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=m
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=m
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_ZTE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
#
# USB Physical Layer drivers
#
# CONFIG_OMAP_USB2 is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
# CONFIG_USB_ZERO is not set
CONFIG_USB_AUDIO=m
# CONFIG_GADGET_UAC1 is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_DX_SEP is not set
#
# IIO staging drivers
#
# CONFIG_IIO_ST_HWMON is not set
# CONFIG_IIO_SW_RING is not set
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16204 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
# CONFIG_KXSD9 is not set
# CONFIG_SCA3000 is not set
#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD799X is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7192 is not set
# CONFIG_ADT7310 is not set
# CONFIG_ADT7410 is not set
# CONFIG_AD7280 is not set
# CONFIG_MAX1363 is not set
#
# Analog digital bi-direction converters
#
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7746 is not set
#
# Direct Digital Synthesis
#
# CONFIG_AD5930 is not set
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
# CONFIG_AD9850 is not set
# CONFIG_AD9852 is not set
# CONFIG_AD9910 is not set
# CONFIG_AD9951 is not set
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16060 is not set
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set
#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set
#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
# CONFIG_ADE7754 is not set
# CONFIG_ADE7758 is not set
# CONFIG_ADE7759 is not set
# CONFIG_ADE7854 is not set
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
#
# Triggers - standalone
#
# CONFIG_IIO_SYSFS_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_PHONE is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_USB_G_CCG is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_ZCACHE2 is not set
# CONFIG_NET_VENDOR_SILICOM is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_TC1100_WMI is not set
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_MXM_WMI is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
#
# Analog to digital converters
#
# CONFIG_AD7266 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7476 is not set
#
# Amplifiers
#
# CONFIG_AD8366 is not set
#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_VCNL4000 is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD5686 is not set
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
#
# Hid Sensor IIO Common
#
#
# Digital gyroscope sensors
#
#
# Light sensors
#
#
# Magnetometer sensors
#
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
CONFIG_DMI_SYSFS=m
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2013-07-15 21:12 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-18 15:54 [Bisected] 3.7-rc1 can't resume Jonas Heinrich
2013-02-18 16:21 ` H. Peter Anvin
2013-02-23 13:18 ` Jonas Heinrich
2013-02-23 21:54 ` H. Peter Anvin
[not found] ` <20130320143257.GA473@onny>
2013-05-01 17:01 ` [Bisected] 3.7-rc1 can't resume (still present in 3.9) Jonas Heinrich
2013-05-01 17:33 ` H. Peter Anvin
2013-05-01 18:51 ` Jonas Heinrich
2013-05-01 18:55 ` H. Peter Anvin
2013-05-02 0:45 ` Rafael J. Wysocki
2013-05-02 20:32 ` Jonas Heinrich
2013-05-02 23:29 ` Rafael J. Wysocki
2013-05-03 11:07 ` Jonas Heinrich
2013-05-03 11:37 ` Rafael J. Wysocki
2013-05-28 21:36 ` Rafael J. Wysocki
2013-05-03 12:15 ` Jarkko Sakkinen
2013-07-08 9:50 ` Jonas Heinrich
2013-07-08 13:05 ` Rafael J. Wysocki
2013-07-15 21:11 ` H. Peter Anvin
2013-07-10 20:52 ` Christian Sünkenberg
2013-07-10 23:57 ` H. Peter Anvin
2013-07-12 23:36 ` Christian Sünkenberg
2013-07-12 23:45 ` H. Peter Anvin
2013-07-13 3:21 ` [tip:x86/urgent] x86, suspend: Handle CPUs which fail to #GP on RDMSR tip-bot for H. Peter Anvin
2013-07-15 20:58 ` tip-bot for H. Peter Anvin
-- strict thread matches above, loose matches on Subject: below --
2013-02-17 17:48 [Bisected] 3.7-rc1 can't resume Jonas Heinrich
2013-02-17 20:40 ` Rafael J. Wysocki
2013-02-17 20:52 ` H. Peter Anvin
2012-10-18 12:26 Cédric Godin
2012-10-18 14:17 ` H. Peter Anvin
2012-10-19 7:10 ` Cédric Godin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.