[PATCH V2 0/1] linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE

[PATCH V2 0/1] linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE

[Darren Hart]

The following changes since commit 47aca0f0f79c30d1df1f89c710d3e354f436145d:

  subversion: Add missing build dependency on sqlite3 (2012-08-06 16:13:45 +0100)

are available in the git repository at:

  git://git.yoctoproject.org/user-contrib/dvhart/oe-core skeleton
  http://git.yoctoproject.org/cgit.cgi/user-contrib/dvhart/oe-core/log/?h=skeleton

Darren Hart (1):
  linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE

 .../recipes-kernel/linux/linux-yocto-custom.bb     | 53 +++++++++++++++-------
 1 file changed, 36 insertions(+), 17 deletions(-)

-- 
1.7.11.2

[PATCH 1/1] linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE

[Darren Hart]

There has been some confusion over proper use of the linux-yocto-custom
recipe. It is not intended to build as is from meta-skeleton. It should
be modified via a bbappend file to provide a Linux kernel config at the
very least.

Update the commentary to make this requirement more explicit. Add some
additional detail about how to create a bbappend file and how and when
to modify the various variables.

Clear COMPATIBLE_MACHINE so bitbake will not attempt to build the recipe
unless the user explicitly adds there machine to the variable, which
should encourage them to read the recipe comments before attempting to
build it.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
---
 .../recipes-kernel/linux/linux-yocto-custom.bb     | 53 +++++++++++++++-------
 1 file changed, 36 insertions(+), 17 deletions(-)

diff --git a/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb b/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb
index 55f0c38..1f0b3a2 100644
--- a/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb
+++ b/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb
@@ -1,17 +1,36 @@
 # linux-yocto-custom.bb:
 #
-#   Provides an example/minimal kernel recipe that uses the linux-yocto
-#   and oe-core kernel classes to apply a subset of yocto kernel 
-#   management to git managed kernel repositories.
+#   An example kernel recipe that uses the linux-yocto and oe-core
+#   kernel classes to apply a subset of yocto kernel management to git
+#   managed kernel repositories.
+#
+#   To use linux-yocto-custom in your layer, create a
+#   linux-yocto-custom.bbappend file containing at least the following
+#   lines:
+#
+#     FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+#     COMPATIBLE_MACHINE_yourmachine = "yourmachine"
+#
+#   You must also provide a Linux kernel configuration. The most direct
+#   method is to copy your .config to files/defconfig in your layer,
+#   in the same directory as the bbappend.
+#
+#   To use the yocto kernel tooling to generate a BSP configuration
+#   using modular configuration fragments, see the yocto-bsp and
+#   yocto-kernel tools documentation.
+#
+# Warning:
+#
+#   Building this example without providing a defconfig or BSP
+#   configuration will result in build or boot errors. This is not a
+#   bug.
+#
 #
 # Notes:
 #
-#   kconfig(s): the kernel must be configured with a defconfig, or via
-#               configuration fragment(s). Either of these can be added
-#               via bbappend.
-#   patches: patches can be merged into to the source git tree itself, added
-#            using standard bbappend syntax or controlled via .scc feature 
-#            descriptions (also via bbappends)
+#   patches: patches can be merged into to the source git tree itself,
+#            added via the SRC_URI, or controlled via a BSP
+#            configuration.
 #   
 #   example configuration addition:
 #            SRC_URI += "file://smp.cfg"
@@ -20,25 +39,25 @@
 #   example feature addition (for kernel v3.4 only):
 #            SRC_URI += "file://feature.scc"
 #
-# Warning:
-#
-#   Building the sample kernel tree (kernel.org) without providing any
-#   configuration will result in build or boot errors. This is not a bug
-#   it is a required element for creating a valid kernel.
-#    
 
 inherit kernel
 require recipes-kernel/linux/linux-yocto.inc
 
+# Override SRC_URI in a bbappend file to point at a different source
+# tree if you do not want to build from Linus' tree.
 SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;nocheckout=1"
 
 LINUX_VERSION ?= "3.4"
 LINUX_VERSION_EXTENSION ?= "-custom"
 
+# Override SRCREV to point to a different commit in a bbappend file to
+# build a different release of the Linux kernel.
 # tag: v3.4 76e10d158efb6d4516018846f60c2ab5501900bc
 SRCREV="76e10d158efb6d4516018846f60c2ab5501900bc"
 
-PR = "r0"
+PR = "r1"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-COMPATIBLE_MACHINE = "(qemuarm|qemux86|qemuppc|qemumips|qemux86-64)"
+# Override COMPATIBLE_MACHINE to include your machine in a bbappend
+# file. Leaving it empty here ensures an early explicit build failure.
+COMPATIBLE_MACHINE = "(^$)"
-- 
1.7.11.2

Re: [PATCH V2 0/1] linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE

[Bruce Ashfield]

On 12-08-06 11:56 AM, Darren Hart wrote:
> The following changes since commit 47aca0f0f79c30d1df1f89c710d3e354f436145d:
>
>    subversion: Add missing build dependency on sqlite3 (2012-08-06 16:13:45 +0100)
>
> are available in the git repository at:
>
>    git://git.yoctoproject.org/user-contrib/dvhart/oe-core skeleton
>    http://git.yoctoproject.org/cgit.cgi/user-contrib/dvhart/oe-core/log/?h=skeleton
>
> Darren Hart (1):
>    linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE

Looks good to me.

Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>

>
>   .../recipes-kernel/linux/linux-yocto-custom.bb     | 53 +++++++++++++++-------
>   1 file changed, 36 insertions(+), 17 deletions(-)
>

Re: [PATCH 1/1] linux-yocto-custom: Clarify usage and clear COMPATIBLE_MACHINE

[Richard Purdie]

On Mon, 2012-08-06 at 08:56 -0700, Darren Hart wrote:
> There has been some confusion over proper use of the linux-yocto-custom
> recipe. It is not intended to build as is from meta-skeleton. It should
> be modified via a bbappend file to provide a Linux kernel config at the
> very least.
> 
> Update the commentary to make this requirement more explicit. Add some
> additional detail about how to create a bbappend file and how and when
> to modify the various variables.
> 
> Clear COMPATIBLE_MACHINE so bitbake will not attempt to build the recipe
> unless the user explicitly adds there machine to the variable, which
> should encourage them to read the recipe comments before attempting to
> build it.
> 
> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
> CC: Bruce Ashfield <bruce.ashfield@windriver.com>
> CC: Tom Zanussi <tom.zanussi@intel.com>
> Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Merged to master, thanks.

Richard