From: Jean-Francois Moine <moinejf@free.fr> To: Mark Brown <broonie@kernel.org>, Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Dave Airlie <airlied@gmail.com>, Andrew Jackson <Andrew.Jackson@arm.com>, Jyri Sarha <jsarha@ti.com>, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: [PATCH v10 0/9] ASoC: tda998x: add a codec to the HDMI transmitter Date: Tue, 20 Jan 2015 20:35:32 +0100 [thread overview] Message-ID: <cover.1421782532.git.moinejf@free.fr> (raw) Based on broonie/ASoC v10: - add the generic dt-card - define the audio ports from a DT graph of ports (Russell King) - reuse HDMI constants (Andrew Jackson - Jyri Sarha) - alloc rate_constraints in codec (Jyri Sarha) - fix bad number of channels (Jyri Sarha) - correct codec generation from config (Russell King - Jyri Sarha) - no module init/exit (Russell King) v9: - back to a TDA998x specific CODEC - more comments - change magic values to constants v8: - change some comments about the patches v7: - remove the change of the K predivider (Jyri Sarha) - add S24_3LE and S32_LE as possible audio formats (Jyri Sarha) - don't move the struct priv2 definition and use the slave encoder private data as the device private data (Russell King) - remove the useless request_module (Russell King/Mark Brown) - don't lock the HDMI module (Russell King) - use platform_device_unregister to remove the codec (Russell King) v6: - extend the HDMI CODEC instead of using a specific CODEC v5: - use the TDA998x private data instead of a specific area for the CODEC interface - the CODEC is TDA998x specific (Mark Brown) v4: - remove all the TDA998x specific stuff from the CODEC - move the EDID scan from the CODEC to the TDA998x - move the CODEC to sound/soc (Mark Brown) - update the audio_sample_rate from the EDID (Andrew Jackson) v3: fix bad rate (Andrew Jackson) v2: check double stream start (Mark Brown) Jean-Francois Moine (9): ASoC: kirkwood: dynamically build the DAI array ASoC: kirkwood: check the DAI type from the DAI name ASoC: kirkwood: accept the DAI definitions from a graph of ports drm/i2c: tda998x: Add support of a DT graph of ports drm/i2c: tda998x: Change drvdata for audio extension ASoC: tda998x: add a codec to the HDMI transmitter drm/i2c: tda998x: set cts_n according to the sample width ASoC: core: export snd_soc_get_dai_name ASoC: add generic dt-card support .../devicetree/bindings/drm/i2c/tda998x.txt | 51 ++++ .../devicetree/bindings/sound/mvebu-audio.txt | 30 +++ drivers/gpu/drm/i2c/tda998x_drv.c | 237 +++++++++++++++++- include/sound/soc.h | 2 + include/sound/tda998x.h | 32 +++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tda998x.c | 175 +++++++++++++ sound/soc/generic/Kconfig | 2 + sound/soc/generic/Makefile | 2 + sound/soc/generic/dt-card.c | 275 +++++++++++++++++++++ sound/soc/kirkwood/kirkwood-i2s.c | 141 ++++++----- sound/soc/kirkwood/kirkwood.h | 4 +- sound/soc/soc-core.c | 5 +- 14 files changed, 877 insertions(+), 86 deletions(-) create mode 100644 include/sound/tda998x.h create mode 100644 sound/soc/codecs/tda998x.c create mode 100644 sound/soc/generic/dt-card.c -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Jean-Francois Moine <moinejf@free.fr> To: Mark Brown <broonie@kernel.org>, Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Andrew Jackson <Andrew.Jackson@arm.com>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Jyri Sarha <jsarha@ti.com> Subject: [PATCH v10 0/9] ASoC: tda998x: add a codec to the HDMI transmitter Date: Tue, 20 Jan 2015 20:35:32 +0100 [thread overview] Message-ID: <cover.1421782532.git.moinejf@free.fr> (raw) Based on broonie/ASoC v10: - add the generic dt-card - define the audio ports from a DT graph of ports (Russell King) - reuse HDMI constants (Andrew Jackson - Jyri Sarha) - alloc rate_constraints in codec (Jyri Sarha) - fix bad number of channels (Jyri Sarha) - correct codec generation from config (Russell King - Jyri Sarha) - no module init/exit (Russell King) v9: - back to a TDA998x specific CODEC - more comments - change magic values to constants v8: - change some comments about the patches v7: - remove the change of the K predivider (Jyri Sarha) - add S24_3LE and S32_LE as possible audio formats (Jyri Sarha) - don't move the struct priv2 definition and use the slave encoder private data as the device private data (Russell King) - remove the useless request_module (Russell King/Mark Brown) - don't lock the HDMI module (Russell King) - use platform_device_unregister to remove the codec (Russell King) v6: - extend the HDMI CODEC instead of using a specific CODEC v5: - use the TDA998x private data instead of a specific area for the CODEC interface - the CODEC is TDA998x specific (Mark Brown) v4: - remove all the TDA998x specific stuff from the CODEC - move the EDID scan from the CODEC to the TDA998x - move the CODEC to sound/soc (Mark Brown) - update the audio_sample_rate from the EDID (Andrew Jackson) v3: fix bad rate (Andrew Jackson) v2: check double stream start (Mark Brown) Jean-Francois Moine (9): ASoC: kirkwood: dynamically build the DAI array ASoC: kirkwood: check the DAI type from the DAI name ASoC: kirkwood: accept the DAI definitions from a graph of ports drm/i2c: tda998x: Add support of a DT graph of ports drm/i2c: tda998x: Change drvdata for audio extension ASoC: tda998x: add a codec to the HDMI transmitter drm/i2c: tda998x: set cts_n according to the sample width ASoC: core: export snd_soc_get_dai_name ASoC: add generic dt-card support .../devicetree/bindings/drm/i2c/tda998x.txt | 51 ++++ .../devicetree/bindings/sound/mvebu-audio.txt | 30 +++ drivers/gpu/drm/i2c/tda998x_drv.c | 237 +++++++++++++++++- include/sound/soc.h | 2 + include/sound/tda998x.h | 32 +++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tda998x.c | 175 +++++++++++++ sound/soc/generic/Kconfig | 2 + sound/soc/generic/Makefile | 2 + sound/soc/generic/dt-card.c | 275 +++++++++++++++++++++ sound/soc/kirkwood/kirkwood-i2s.c | 141 ++++++----- sound/soc/kirkwood/kirkwood.h | 4 +- sound/soc/soc-core.c | 5 +- 14 files changed, 877 insertions(+), 86 deletions(-) create mode 100644 include/sound/tda998x.h create mode 100644 sound/soc/codecs/tda998x.c create mode 100644 sound/soc/generic/dt-card.c -- 2.1.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2015-01-20 19:43 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-20 19:35 Jean-Francois Moine [this message] 2015-01-20 19:35 ` [PATCH v10 0/9] ASoC: tda998x: add a codec to the HDMI transmitter Jean-Francois Moine 2015-01-19 17:15 ` [PATCH v10 1/9] ASoC: kirkwood: dynamically build the DAI array Jean-Francois Moine 2015-01-19 17:15 ` Jean-Francois Moine 2015-01-19 17:38 ` [PATCH v10 2/9] ASoC: kirkwood: check the DAI type from the DAI name Jean-Francois Moine 2015-01-19 17:38 ` Jean-Francois Moine 2015-01-19 18:50 ` [PATCH v10 3/9] ASoC: kirkwood: accept the DAI definitions from a graph of ports Jean-Francois Moine 2015-01-19 18:50 ` Jean-Francois Moine 2015-01-20 9:27 ` [PATCH v10 4/9] drm/i2c: tda998x: Add support of a DT " Jean-Francois Moine 2015-01-20 9:27 ` Jean-Francois Moine 2015-01-20 11:16 ` [PATCH v10 5/9] drm/i2c: tda998x: Change drvdata for audio extension Jean-Francois Moine 2015-01-20 11:16 ` Jean-Francois Moine 2015-01-20 15:38 ` [PATCH v10 6/9] ASoC: tda998x: add a codec to the HDMI transmitter Jean-Francois Moine 2015-01-20 15:38 ` Jean-Francois Moine 2015-01-20 16:50 ` [PATCH v10 7/9] drm/i2c: tda998x: set cts_n according to the sample width Jean-Francois Moine 2015-01-20 16:50 ` Jean-Francois Moine 2015-01-20 18:47 ` [PATCH v10 8/9] ASoC: core: export snd_soc_get_dai_name Jean-Francois Moine 2015-01-20 18:47 ` Jean-Francois Moine 2015-01-20 19:16 ` [PATCH v10 9/9] ASoC: add generic dt-card support Jean-Francois Moine 2015-01-20 19:16 ` Jean-Francois Moine 2015-01-21 13:50 ` Mark Brown 2015-01-21 13:50 ` Mark Brown 2015-04-27 11:33 ` [PATCH v10 0/9] ASoC: tda998x: add a codec to the HDMI transmitter Jyri Sarha 2015-04-27 11:33 ` Jyri Sarha 2015-04-27 18:25 ` Jean-Francois Moine 2015-04-27 18:25 ` Jean-Francois Moine 2015-04-28 7:10 ` Jean-Francois Moine 2015-04-28 7:10 ` Jean-Francois Moine
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.1421782532.git.moinejf@free.fr \ --to=moinejf@free.fr \ --cc=Andrew.Jackson@arm.com \ --cc=airlied@gmail.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jsarha@ti.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.