[PATCH v2 0/2] ARM: imx6ul-14x14-evk: Fix suspend over nfs by phy

[PATCH v2 0/2] ARM: imx6ul-14x14-evk: Fix suspend over nfs by phy

[Leonard Crestez]

Right now attempting doing suspend/resume while root is mounted over NFS
hangs on imx6ul-14x14-evk. This is happening because ksz8081 phy fixups are
lost on resume.

Fix this by using equivalent devicetree properties instead of a phy fixup
and handling those properties on resume in the micrel driver.

In theory it might now be possible to remove the phy fixup from mach-imx6ul
entirely but it is possible that this would break other imx6ul boards which
use the same phy. The solution would be to patch their dts but it's not
clear how to identify affected boards.

This code is shared with imx6ull-14x14-evk but 6ull suspend needs an
unrelated patch: https://lkml.org/lkml/2017/5/30/584

This is something of a corner case so there is no CC: stable.

Changes since v1: https://lkml.org/lkml/2017/5/30/672 
 * Split a kszphy_config_reset function for stuff shared between
config_init and resume. Calling config_init directly could be an option but
on some HW variants it does extra stuff like parsing devicetree options.
That would not be appropriate for resume code.

Leonard Crestez (2):
  ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties
  net: phy: micrel: Restore led_mode and clk_sel on resume

 arch/arm/boot/dts/imx6ul-14x14-evk.dts |  6 +++++
 drivers/net/phy/micrel.c               | 42 ++++++++++++++++++++++------------
 2 files changed, 34 insertions(+), 14 deletions(-)

-- 
2.7.4

[PATCH v2 0/2] ARM: imx6ul-14x14-evk: Fix suspend over nfs by phy

[Leonard Crestez]

Right now attempting doing suspend/resume while root is mounted over NFS
hangs on imx6ul-14x14-evk. This is happening because ksz8081 phy fixups are
lost on resume.

Fix this by using equivalent devicetree properties instead of a phy fixup
and handling those properties on resume in the micrel driver.

In theory it might now be possible to remove the phy fixup from mach-imx6ul
entirely but it is possible that this would break other imx6ul boards which
use the same phy. The solution would be to patch their dts but it's not
clear how to identify affected boards.

This code is shared with imx6ull-14x14-evk but 6ull suspend needs an
unrelated patch: https://lkml.org/lkml/2017/5/30/584

This is something of a corner case so there is no CC: stable.

Changes since v1: https://lkml.org/lkml/2017/5/30/672 
 * Split a kszphy_config_reset function for stuff shared between
config_init and resume. Calling config_init directly could be an option but
on some HW variants it does extra stuff like parsing devicetree options.
That would not be appropriate for resume code.

Leonard Crestez (2):
  ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties
  net: phy: micrel: Restore led_mode and clk_sel on resume

 arch/arm/boot/dts/imx6ul-14x14-evk.dts |  6 +++++
 drivers/net/phy/micrel.c               | 42 ++++++++++++++++++++++------------
 2 files changed, 34 insertions(+), 14 deletions(-)

-- 
2.7.4

[PATCH v2 1/2] ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties

[Leonard Crestez]

Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
register values can be set through the micrel phy driver by using dts
properties.

This seems preferable and allows cleanly fixing suspend/resume.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index f18e1f1..d2be8aa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -120,10 +120,16 @@
 
 		ethphy0: ethernet-phy@2 {
 			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
-- 
2.7.4

[PATCH v2 1/2] ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties

[Leonard Crestez]

Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
register values can be set through the micrel phy driver by using dts
properties.

This seems preferable and allows cleanly fixing suspend/resume.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index f18e1f1..d2be8aa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -120,10 +120,16 @@
 
 		ethphy0: ethernet-phy at 2 {
 			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 
 		ethphy1: ethernet-phy at 1 {
 			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
-- 
2.7.4

[PATCH v2 net 2/2] net: phy: micrel: Restore led_mode and clk_sel on resume

[Leonard Crestez]

These bits seem to be lost after a suspend/resume cycle so just set them
again. Do this by splitting the handling of these bits into a function
that is also called on resume.

This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/net/phy/micrel.c | 42 ++++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 6a5fd18..b9252b8d8 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -268,23 +268,12 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
 	return ret;
 }
 
-static int kszphy_config_init(struct phy_device *phydev)
+/* Some config bits need to be set again on resume, handle them here. */
+static int kszphy_config_reset(struct phy_device *phydev)
 {
 	struct kszphy_priv *priv = phydev->priv;
-	const struct kszphy_type *type;
 	int ret;
 
-	if (!priv)
-		return 0;
-
-	type = priv->type;
-
-	if (type->has_broadcast_disable)
-		kszphy_broadcast_disable(phydev);
-
-	if (type->has_nand_tree_disable)
-		kszphy_nand_tree_disable(phydev);
-
 	if (priv->rmii_ref_clk_sel) {
 		ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
 		if (ret) {
@@ -295,11 +284,30 @@ static int kszphy_config_init(struct phy_device *phydev)
 	}
 
 	if (priv->led_mode >= 0)
-		kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
+		kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
 
 	return 0;
 }
 
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	const struct kszphy_type *type;
+
+	if (!priv)
+		return 0;
+
+	type = priv->type;
+
+	if (type->has_broadcast_disable)
+		kszphy_broadcast_disable(phydev);
+
+	if (type->has_nand_tree_disable)
+		kszphy_nand_tree_disable(phydev);
+
+	return kszphy_config_reset(phydev);
+}
+
 static int ksz8041_config_init(struct phy_device *phydev)
 {
 	struct device_node *of_node = phydev->mdio.dev.of_node;
@@ -700,8 +708,14 @@ static int kszphy_suspend(struct phy_device *phydev)
 
 static int kszphy_resume(struct phy_device *phydev)
 {
+	int ret;
+
 	genphy_resume(phydev);
 
+	ret = kszphy_config_reset(phydev);
+	if (ret)
+		return ret;
+
 	/* Enable PHY Interrupts */
 	if (phy_interrupt_is_valid(phydev)) {
 		phydev->interrupts = PHY_INTERRUPT_ENABLED;
-- 
2.7.4

[PATCH v2 net 2/2] net: phy: micrel: Restore led_mode and clk_sel on resume

[Leonard Crestez]

These bits seem to be lost after a suspend/resume cycle so just set them
again. Do this by splitting the handling of these bits into a function
that is also called on resume.

This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/net/phy/micrel.c | 42 ++++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 6a5fd18..b9252b8d8 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -268,23 +268,12 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
 	return ret;
 }
 
-static int kszphy_config_init(struct phy_device *phydev)
+/* Some config bits need to be set again on resume, handle them here. */
+static int kszphy_config_reset(struct phy_device *phydev)
 {
 	struct kszphy_priv *priv = phydev->priv;
-	const struct kszphy_type *type;
 	int ret;
 
-	if (!priv)
-		return 0;
-
-	type = priv->type;
-
-	if (type->has_broadcast_disable)
-		kszphy_broadcast_disable(phydev);
-
-	if (type->has_nand_tree_disable)
-		kszphy_nand_tree_disable(phydev);
-
 	if (priv->rmii_ref_clk_sel) {
 		ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
 		if (ret) {
@@ -295,11 +284,30 @@ static int kszphy_config_init(struct phy_device *phydev)
 	}
 
 	if (priv->led_mode >= 0)
-		kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
+		kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
 
 	return 0;
 }
 
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	const struct kszphy_type *type;
+
+	if (!priv)
+		return 0;
+
+	type = priv->type;
+
+	if (type->has_broadcast_disable)
+		kszphy_broadcast_disable(phydev);
+
+	if (type->has_nand_tree_disable)
+		kszphy_nand_tree_disable(phydev);
+
+	return kszphy_config_reset(phydev);
+}
+
 static int ksz8041_config_init(struct phy_device *phydev)
 {
 	struct device_node *of_node = phydev->mdio.dev.of_node;
@@ -700,8 +708,14 @@ static int kszphy_suspend(struct phy_device *phydev)
 
 static int kszphy_resume(struct phy_device *phydev)
 {
+	int ret;
+
 	genphy_resume(phydev);
 
+	ret = kszphy_config_reset(phydev);
+	if (ret)
+		return ret;
+
 	/* Enable PHY Interrupts */
 	if (phy_interrupt_is_valid(phydev)) {
 		phydev->interrupts = PHY_INTERRUPT_ENABLED;
-- 
2.7.4

Re: [PATCH v2 net 2/2] net: phy: micrel: Restore led_mode and clk_sel on resume

[Florian Fainelli]

On 05/31/2017 03:29 AM, Leonard Crestez wrote:
> These bits seem to be lost after a suspend/resume cycle so just set them
> again. Do this by splitting the handling of these bits into a function
> that is also called on resume.
> 
> This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH v2 net 2/2] net: phy: micrel: Restore led_mode and clk_sel on resume

[Florian Fainelli]

On 05/31/2017 03:29 AM, Leonard Crestez wrote:
> These bits seem to be lost after a suspend/resume cycle so just set them
> again. Do this by splitting the handling of these bits into a function
> that is also called on resume.
> 
> This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH v2 1/2] ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties

[Florian Fainelli]

On 05/31/2017 03:29 AM, Leonard Crestez wrote:
> Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
> register values can be set through the micrel phy driver by using dts
> properties.
> 
> This seems preferable and allows cleanly fixing suspend/resume.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH v2 1/2] ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties

[Florian Fainelli]

On 05/31/2017 03:29 AM, Leonard Crestez wrote:
> Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
> register values can be set through the micrel phy driver by using dts
> properties.
> 
> This seems preferable and allows cleanly fixing suspend/resume.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH v2 0/2] ARM: imx6ul-14x14-evk: Fix suspend over nfs by phy

[David Miller]

From: Leonard Crestez <leonard.crestez@nxp.com>
Date: Wed, 31 May 2017 13:29:28 +0300

> Right now attempting doing suspend/resume while root is mounted over NFS
> hangs on imx6ul-14x14-evk. This is happening because ksz8081 phy fixups are
> lost on resume.
> 
> Fix this by using equivalent devicetree properties instead of a phy fixup
> and handling those properties on resume in the micrel driver.
> 
> In theory it might now be possible to remove the phy fixup from mach-imx6ul
> entirely but it is possible that this would break other imx6ul boards which
> use the same phy. The solution would be to patch their dts but it's not
> clear how to identify affected boards.
> 
> This code is shared with imx6ull-14x14-evk but 6ull suspend needs an
> unrelated patch: https://lkml.org/lkml/2017/5/30/584
> 
> This is something of a corner case so there is no CC: stable.
> 
> Changes since v1: https://lkml.org/lkml/2017/5/30/672 
>  * Split a kszphy_config_reset function for stuff shared between
> config_init and resume. Calling config_init directly could be an option but
> on some HW variants it does extra stuff like parsing devicetree options.
> That would not be appropriate for resume code.

Series applied.

[PATCH v2 0/2] ARM: imx6ul-14x14-evk: Fix suspend over nfs by phy

[David Miller]

From: Leonard Crestez <leonard.crestez@nxp.com>
Date: Wed, 31 May 2017 13:29:28 +0300

> Right now attempting doing suspend/resume while root is mounted over NFS
> hangs on imx6ul-14x14-evk. This is happening because ksz8081 phy fixups are
> lost on resume.
> 
> Fix this by using equivalent devicetree properties instead of a phy fixup
> and handling those properties on resume in the micrel driver.
> 
> In theory it might now be possible to remove the phy fixup from mach-imx6ul
> entirely but it is possible that this would break other imx6ul boards which
> use the same phy. The solution would be to patch their dts but it's not
> clear how to identify affected boards.
> 
> This code is shared with imx6ull-14x14-evk but 6ull suspend needs an
> unrelated patch: https://lkml.org/lkml/2017/5/30/584
> 
> This is something of a corner case so there is no CC: stable.
> 
> Changes since v1: https://lkml.org/lkml/2017/5/30/672 
>  * Split a kszphy_config_reset function for stuff shared between
> config_init and resume. Calling config_init directly could be an option but
> on some HW variants it does extra stuff like parsing devicetree options.
> That would not be appropriate for resume code.

Series applied.