[PATCH 1/5] Revert "ACPI / button: Remove lid_init_state=method mode"

[PATCH 1/5] Revert "ACPI / button: Remove lid_init_state=method mode"

[Lv Zheng]

This reverts commit ecb10b694b72ca5ea51b3c90a71ff2a11963425a.

The only expected ACPI control method lid device's usage model is
1. Listen to the lid notification,
2. Evaluate _LID after being notified by BIOS,
3. Suspend the system (if users configure to do so) after seeing "close".
It's not ensured that BIOS will notify OS after boot/resume, and
it's not ensured that BIOS will always generate "open" event upon
opening the lid.

But there are 2 wrong usage models:
1. When the lid device is responsible for suspend/resume the system,
   userspace requires to see "open" event to be paired with "close" after
   the system is resumed, or it will suspend the system again.
2. When an external monitor connects to the laptop attached docks,
   userspace requires to see "close" event after the system is resumed so
   that it can determine whether the internal display should remain dark
   and the external display should be lit on.

After we made default kenrel behavior to be suitable for usage model 1,
users of usage model 2 start to report regressions for such behavior
change.

Reversion of button.lid_init_state=method doesn't actually reverts to old
default behavior as doing so can enter a regression loop, but facilitates
users to work the reported regressions around with
button.lid_init_state=method.

Fixes: 77e9a4aa9de1 ("ACPI / button: Change default behavior to lid_init_state=open")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Reported-by: Julian Wiedmann <julian.weidmann@jwi.name>
Reported-by: Joachim Frieben <jfrieben@hotmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 Documentation/acpi/acpi-lid.txt | 16 ++++++++++++----
 drivers/acpi/button.c           |  9 +++++++++
 2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
index 22cb309..effe7af 100644
--- a/Documentation/acpi/acpi-lid.txt
+++ b/Documentation/acpi/acpi-lid.txt
@@ -59,20 +59,28 @@ button driver uses the following 3 modes in order not to trigger issues.
 If the userspace hasn't been prepared to ignore the unreliable "opened"
 events and the unreliable initial state notification, Linux users can use
 the following kernel parameters to handle the possible issues:
-A. button.lid_init_state=open:
+A. button.lid_init_state=method:
+   When this option is specified, the ACPI button driver reports the
+   initial lid state using the returning value of the _LID control method
+   and whether the "opened"/"closed" events are paired fully relies on the
+   firmware implementation.
+   This option can be used to fix some platforms where the returning value
+   of the _LID control method is reliable but the initial lid state
+   notification is missing.
+   This option is the default behavior during the period the userspace
+   isn't ready to handle the buggy AML tables.
+B. button.lid_init_state=open:
    When this option is specified, the ACPI button driver always reports the
    initial lid state as "opened" and whether the "opened"/"closed" events
    are paired fully relies on the firmware implementation.
    This may fix some platforms where the returning value of the _LID
    control method is not reliable and the initial lid state notification is
    missing.
-   This option is the default behavior during the period the userspace
-   isn't ready to handle the buggy AML tables.
 
 If the userspace has been prepared to ignore the unreliable "opened" events
 and the unreliable initial state notification, Linux users should always
 use the following kernel parameter:
-B. button.lid_init_state=ignore:
+C. button.lid_init_state=ignore:
    When this option is specified, the ACPI button driver never reports the
    initial lid state and there is a compensation mechanism implemented to
    ensure that the reliable "closed" notifications can always be delievered
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 668137e..6d5a8c1 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -57,6 +57,7 @@
 
 #define ACPI_BUTTON_LID_INIT_IGNORE	0x00
 #define ACPI_BUTTON_LID_INIT_OPEN	0x01
+#define ACPI_BUTTON_LID_INIT_METHOD	0x02
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -376,6 +377,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		(void)acpi_lid_notify_state(device, 1);
 		break;
+	case ACPI_BUTTON_LID_INIT_METHOD:
+		(void)acpi_lid_update_state(device);
+		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
 		break;
@@ -559,6 +563,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 		pr_info("Notify initial lid state as open\n");
+	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
+		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+		pr_info("Notify initial lid state with _LID return value\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
 		pr_info("Do not notify initial lid state\n");
@@ -572,6 +579,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		return sprintf(buffer, "open");
+	case ACPI_BUTTON_LID_INIT_METHOD:
+		return sprintf(buffer, "method");
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 		return sprintf(buffer, "ignore");
 	default:
-- 
2.7.4

[PATCH 2/5] ACPI: button: Add button.lid_init_state=close

[Lv Zheng]

This patch adds button.lid_init_state=close so that it can explicitly
explain the contradictory requirements and help the kernel community to
raise such bugs to the correct responsibles.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Reported-by: Julian Wiedmann <julian.weidmann@jwi.name>
Reported-by: Joachim Frieben <jfrieben@hotmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 Documentation/acpi/acpi-lid.txt | 12 +++++++-----
 drivers/acpi/button.c           | 11 ++++++++++-
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
index effe7af..e846a59 100644
--- a/Documentation/acpi/acpi-lid.txt
+++ b/Documentation/acpi/acpi-lid.txt
@@ -69,13 +69,15 @@ A. button.lid_init_state=method:
    notification is missing.
    This option is the default behavior during the period the userspace
    isn't ready to handle the buggy AML tables.
-B. button.lid_init_state=open:
-   When this option is specified, the ACPI button driver always reports the
-   initial lid state as "opened" and whether the "opened"/"closed" events
-   are paired fully relies on the firmware implementation.
+B. button.lid_init_state=open/close:
+   When one of these options are specified, the ACPI button driver always
+   reports the initial lid state as fixed "opened"/"closed" and whether the
+   "opened"/"closed" events are paired fully relies on the firmware
+   implementation.
    This may fix some platforms where the returning value of the _LID
    control method is not reliable and the initial lid state notification is
-   missing.
+   missing. Especially useful for platforms where different usage models
+   require contractory initial lid state.
 
 If the userspace has been prepared to ignore the unreliable "opened" events
 and the unreliable initial state notification, Linux users should always
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 6d5a8c1..8b4666f 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -57,7 +57,8 @@
 
 #define ACPI_BUTTON_LID_INIT_IGNORE	0x00
 #define ACPI_BUTTON_LID_INIT_OPEN	0x01
-#define ACPI_BUTTON_LID_INIT_METHOD	0x02
+#define ACPI_BUTTON_LID_INIT_CLOSE	0x02
+#define ACPI_BUTTON_LID_INIT_METHOD	0x03
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -377,6 +378,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		(void)acpi_lid_notify_state(device, 1);
 		break;
+	case ACPI_BUTTON_LID_INIT_CLOSE:
+		(void)acpi_lid_notify_state(device, 0);
+		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		(void)acpi_lid_update_state(device);
 		break;
@@ -563,6 +567,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 		pr_info("Notify initial lid state as open\n");
+	} else if (!strncmp(val, "close", sizeof("close") - 1)) {
+		lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
+		pr_info("Notify initial lid state as close\n");
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 		pr_info("Notify initial lid state with _LID return value\n");
@@ -579,6 +586,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		return sprintf(buffer, "open");
+	case ACPI_BUTTON_LID_INIT_CLOSE:
+		return sprintf(buffer, "close");
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		return sprintf(buffer, "method");
 	case ACPI_BUTTON_LID_INIT_IGNORE:
-- 
2.7.4

[PATCH 3/5] ACPI: button: Fix lid notification

[Lv Zheng]

In acpi_lid_notify_state(), it now contains logic to avoid duplicate
notifications which originally was ensured by using blocking notifier. On
the contrary, using blocking notifier is wrong as it could keep on
returning NOTIFY_DONE, causing events lost.
This patch thus changes lid notification to atomic notifier in order not to
have events lost.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 8b4666f..b91ff86 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -112,7 +112,7 @@ struct acpi_button {
 	bool suspended;
 };
 
-static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
+static ATOMIC_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 
@@ -139,10 +139,9 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device, int state)
+static void acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
-	int ret;
 	ktime_t next_report;
 	bool do_update;
 
@@ -220,18 +219,7 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
-	ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
-	if (ret == NOTIFY_DONE)
-		ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
-						   device);
-	if (ret == NOTIFY_DONE || ret == NOTIFY_OK) {
-		/*
-		 * It is also regarded as success if the notifier_chain
-		 * returns NOTIFY_OK or NOTIFY_DONE.
-		 */
-		ret = 0;
-	}
-	return ret;
+	atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -342,13 +330,13 @@ static int acpi_button_remove_fs(struct acpi_device *device)
    -------------------------------------------------------------------------- */
 int acpi_lid_notifier_register(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
+	return atomic_notifier_chain_register(&acpi_lid_notifier, nb);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_register);
 
 int acpi_lid_notifier_unregister(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	return atomic_notifier_chain_unregister(&acpi_lid_notifier, nb);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_unregister);
 
@@ -369,7 +357,8 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	if (state < 0)
 		return state;
 
-	return acpi_lid_notify_state(device, state);
+	acpi_lid_notify_state(device, state);
+	return 0;
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
-- 
2.7.4

[PATCH 4/5] ACPI: button: Always notify kernel space using _LID returning value

[Lv Zheng]

Both nouveau and i915, the only 2 kernel space lid notification listeners,
invoke acpi_lid_open() API to obtain _LID returning value instead of using
the notified value.

So this patch moves this logic from listeners to lid driver, always notify
kernel space listeners using _LID returning value.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index b91ff86..7ff3a75 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
+static bool lid_fake_events __read_mostly = true;
+module_param(lid_fake_events, bool, 0644);
+MODULE_PARM_DESC(lid_fake_events, "Deliver fake events to kernel drivers");
 
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
@@ -139,7 +142,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static void acpi_lid_notify_state(struct acpi_device *device, int state)
+static void acpi_lid_notify_state(struct acpi_device *device,
+				  int state, bool bios_notify)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	ktime_t next_report;
@@ -219,7 +223,11 @@ static void acpi_lid_notify_state(struct acpi_device *device, int state)
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
-	atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
+	if (bios_notify)
+		atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
+	else if (lid_fake_events)
+		atomic_notifier_call_chain(&acpi_lid_notifier,
+			acpi_lid_evaluate_state(device), device);
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -349,7 +357,8 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device)
+static int acpi_lid_update_state(struct acpi_device *device,
+				 bool bios_notify)
 {
 	int state;
 
@@ -357,7 +366,7 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	if (state < 0)
 		return state;
 
-	acpi_lid_notify_state(device, state);
+	acpi_lid_notify_state(device, state, bios_notify);
 	return 0;
 }
 
@@ -365,13 +374,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1);
+		(void)acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_CLOSE:
-		(void)acpi_lid_notify_state(device, 0);
+		(void)acpi_lid_notify_state(device, 0, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device);
+		(void)acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -391,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
-			acpi_lid_update_state(device);
+			acpi_lid_update_state(device, true);
 		} else {
 			int keycode;
 
@@ -555,13 +564,13 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
-		pr_info("Notify initial lid state as open\n");
+		pr_info("Notify initial lid state to users space as open and kernel drivers with _LID return value\n");
 	} else if (!strncmp(val, "close", sizeof("close") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
-		pr_info("Notify initial lid state as close\n");
+		pr_info("Notify initial lid state to user space as close and kernel drivers with _LID return value\n");
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
-		pr_info("Notify initial lid state with _LID return value\n");
+		pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
 		pr_info("Do not notify initial lid state\n");
-- 
2.7.4

[PATCH 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Lv Zheng]

Since notification side has been changed to always notify kernel listeners
using _LID returning value. Now listeners needn't invoke invoke
acpi_lid_open(), it should use a spec suggested control method lid device
usage model: register lid notification and use the notified value instead,
which is the only way to ensure the value is correct.

This patch fixes i915 driver to drop acpi_lid_open() user. It's not
possible to change nouveau_connector.c user using a simple way now. So this
patch only marks acpi_lid_open() as deprecated to accelerate this process
by indicating this change to the nouveau developers.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c             | 7 ++++++-
 drivers/gpu/drm/i915/intel_lvds.c | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 7ff3a75..50d7898 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
 }
 EXPORT_SYMBOL(acpi_lid_notifier_unregister);
 
-int acpi_lid_open(void)
+/*
+ * The intentional usage model is to register a lid notifier and use the
+ * notified value instead. Directly evaluating _LID without seeing a
+ * Notify(lid, 0x80) is not reliable.
+ */
+int __deprecated acpi_lid_open(void)
 {
 	if (!lid_device)
 		return -ENODEV;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9ca4dc4..8ca9080 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	/* Don't force modeset on machines where it causes a GPU lockup */
 	if (dmi_check_system(intel_no_modeset_on_lid))
 		goto exit;
-	if (!acpi_lid_open()) {
+	if (!val) {
 		/* do modeset on next lid open event */
 		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
 		goto exit;
-- 
2.7.4

Re: [PATCH 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Julian Wiedmann]

On 05.05.2017 04:40, Lv Zheng wrote:
> Since notification side has been changed to always notify kernel listeners
> using _LID returning value. Now listeners needn't invoke invoke
> acpi_lid_open(), it should use a spec suggested control method lid device
> usage model: register lid notification and use the notified value instead,
> which is the only way to ensure the value is correct.
> 
> This patch fixes i915 driver to drop acpi_lid_open() user. It's not
> possible to change nouveau_connector.c user using a simple way now. So this
> patch only marks acpi_lid_open() as deprecated to accelerate this process
> by indicating this change to the nouveau developers.
> 
Resend with intel-gfx@lists.freedesktop.org and nouveau@lists.freedesktop.org
on cc?

> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c             | 7 ++++++-
>  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
>  2 files changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 7ff3a75..50d7898 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
>  }
>  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
>  
> -int acpi_lid_open(void)
> +/*
> + * The intentional usage model is to register a lid notifier and use the
> + * notified value instead. Directly evaluating _LID without seeing a
> + * Notify(lid, 0x80) is not reliable.
> + */
> +int __deprecated acpi_lid_open(void)
>  {
>  	if (!lid_device)
>  		return -ENODEV;
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 9ca4dc4..8ca9080 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
>  	/* Don't force modeset on machines where it causes a GPU lockup */
>  	if (dmi_check_system(intel_no_modeset_on_lid))
>  		goto exit;
> -	if (!acpi_lid_open()) {
> +	if (!val) {
>  		/* do modeset on next lid open event */
>  		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
>  		goto exit;
> 

RE: [PATCH 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Zheng, Lv]

Hi, Julian

> From: Julian Wiedmann [mailto:julian.wiedmann@jwi.name]
> Subject: Re: [PATCH 5/5] ACPI: button: Obselete acpi_lid_open() invocations
> 
> On 05.05.2017 04:40, Lv Zheng wrote:
> > Since notification side has been changed to always notify kernel listeners
> > using _LID returning value. Now listeners needn't invoke invoke
> > acpi_lid_open(), it should use a spec suggested control method lid device
> > usage model: register lid notification and use the notified value instead,
> > which is the only way to ensure the value is correct.
> >
> > This patch fixes i915 driver to drop acpi_lid_open() user. It's not
> > possible to change nouveau_connector.c user using a simple way now. So this
> > patch only marks acpi_lid_open() as deprecated to accelerate this process
> > by indicating this change to the nouveau developers.
> >
> Resend with intel-gfx@lists.freedesktop.org and nouveau@lists.freedesktop.org
> on cc?

Sure.
I'll add it to see if there could be objections.

Thanks
Lv

> 
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> >  drivers/acpi/button.c             | 7 ++++++-
> >  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
> >  2 files changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> > index 7ff3a75..50d7898 100644
> > --- a/drivers/acpi/button.c
> > +++ b/drivers/acpi/button.c
> > @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
> >  }
> >  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
> >
> > -int acpi_lid_open(void)
> > +/*
> > + * The intentional usage model is to register a lid notifier and use the
> > + * notified value instead. Directly evaluating _LID without seeing a
> > + * Notify(lid, 0x80) is not reliable.
> > + */
> > +int __deprecated acpi_lid_open(void)
> >  {
> >  	if (!lid_device)
> >  		return -ENODEV;
> > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> > index 9ca4dc4..8ca9080 100644
> > --- a/drivers/gpu/drm/i915/intel_lvds.c
> > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> > @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
> >  	/* Don't force modeset on machines where it causes a GPU lockup */
> >  	if (dmi_check_system(intel_no_modeset_on_lid))
> >  		goto exit;
> > -	if (!acpi_lid_open()) {
> > +	if (!val) {
> >  		/* do modeset on next lid open event */
> >  		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
> >  		goto exit;
> >

Re: [PATCH 1/5] Revert "ACPI / button: Remove lid_init_state=method mode"

[Julian Wiedmann]

On 05.05.2017 04:39, Lv Zheng wrote:
> This reverts commit ecb10b694b72ca5ea51b3c90a71ff2a11963425a.
> 
> The only expected ACPI control method lid device's usage model is
> 1. Listen to the lid notification,
> 2. Evaluate _LID after being notified by BIOS,
> 3. Suspend the system (if users configure to do so) after seeing "close".
> It's not ensured that BIOS will notify OS after boot/resume, and
> it's not ensured that BIOS will always generate "open" event upon
> opening the lid.
> 
> But there are 2 wrong usage models:
> 1. When the lid device is responsible for suspend/resume the system,
>    userspace requires to see "open" event to be paired with "close" after
>    the system is resumed, or it will suspend the system again.
> 2. When an external monitor connects to the laptop attached docks,
>    userspace requires to see "close" event after the system is resumed so
>    that it can determine whether the internal display should remain dark
>    and the external display should be lit on.
> 
> After we made default kenrel behavior to be suitable for usage model 1,
> users of usage model 2 start to report regressions for such behavior
> change.
> 
> Reversion of button.lid_init_state=method doesn't actually reverts to old
> default behavior as doing so can enter a regression loop, but facilitates
> users to work the reported regressions around with
> button.lid_init_state=method.
Thanks Lv for doing this.

> 
> Fixes: 77e9a4aa9de1 ("ACPI / button: Change default behavior to lid_init_state=open")
To be fair, it doesn't actually fix it - the regression is still there,
this just allows affected users to work-around it again. Fixing it means
switching back the default to 'method'.
Anyway, please add a cc: stable so this is picked up for 4.11.x.

> Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
> Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
> Tested-by: Steffen Weber <steffen.weber@gmail.com>
> Reported-by: Julian Wiedmann <julian.weidmann@jwi.name>
Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
(mind the typo)

> Reported-by: Joachim Frieben <jfrieben@hotmail.com>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  Documentation/acpi/acpi-lid.txt | 16 ++++++++++++----
>  drivers/acpi/button.c           |  9 +++++++++
>  2 files changed, 21 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
> index 22cb309..effe7af 100644
> --- a/Documentation/acpi/acpi-lid.txt
> +++ b/Documentation/acpi/acpi-lid.txt
> @@ -59,20 +59,28 @@ button driver uses the following 3 modes in order not to trigger issues.
>  If the userspace hasn't been prepared to ignore the unreliable "opened"
>  events and the unreliable initial state notification, Linux users can use
>  the following kernel parameters to handle the possible issues:
> -A. button.lid_init_state=open:
> +A. button.lid_init_state=method:
> +   When this option is specified, the ACPI button driver reports the
> +   initial lid state using the returning value of the _LID control method
> +   and whether the "opened"/"closed" events are paired fully relies on the
> +   firmware implementation.
> +   This option can be used to fix some platforms where the returning value
> +   of the _LID control method is reliable but the initial lid state
> +   notification is missing.
> +   This option is the default behavior during the period the userspace
> +   isn't ready to handle the buggy AML tables.
> +B. button.lid_init_state=open:
>     When this option is specified, the ACPI button driver always reports the
>     initial lid state as "opened" and whether the "opened"/"closed" events
>     are paired fully relies on the firmware implementation.
>     This may fix some platforms where the returning value of the _LID
>     control method is not reliable and the initial lid state notification is
>     missing.
> -   This option is the default behavior during the period the userspace
> -   isn't ready to handle the buggy AML tables.
>  
>  If the userspace has been prepared to ignore the unreliable "opened" events
>  and the unreliable initial state notification, Linux users should always
>  use the following kernel parameter:
> -B. button.lid_init_state=ignore:
> +C. button.lid_init_state=ignore:
>     When this option is specified, the ACPI button driver never reports the
>     initial lid state and there is a compensation mechanism implemented to
>     ensure that the reliable "closed" notifications can always be delievered
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 668137e..6d5a8c1 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -57,6 +57,7 @@
>  
>  #define ACPI_BUTTON_LID_INIT_IGNORE	0x00
>  #define ACPI_BUTTON_LID_INIT_OPEN	0x01
> +#define ACPI_BUTTON_LID_INIT_METHOD	0x02
>  
>  #define _COMPONENT		ACPI_BUTTON_COMPONENT
>  ACPI_MODULE_NAME("button");
> @@ -376,6 +377,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>  	case ACPI_BUTTON_LID_INIT_OPEN:
>  		(void)acpi_lid_notify_state(device, 1);
>  		break;
> +	case ACPI_BUTTON_LID_INIT_METHOD:
> +		(void)acpi_lid_update_state(device);
> +		break;
>  	case ACPI_BUTTON_LID_INIT_IGNORE:
>  	default:
>  		break;
> @@ -559,6 +563,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
>  	if (!strncmp(val, "open", sizeof("open") - 1)) {
>  		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>  		pr_info("Notify initial lid state as open\n");
> +	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
> +		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> +		pr_info("Notify initial lid state with _LID return value\n");
>  	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
>  		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
>  		pr_info("Do not notify initial lid state\n");
> @@ -572,6 +579,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
>  	switch (lid_init_state) {
>  	case ACPI_BUTTON_LID_INIT_OPEN:
>  		return sprintf(buffer, "open");
> +	case ACPI_BUTTON_LID_INIT_METHOD:
> +		return sprintf(buffer, "method");
>  	case ACPI_BUTTON_LID_INIT_IGNORE:
>  		return sprintf(buffer, "ignore");
>  	default:
> 

RE: [PATCH 1/5] Revert "ACPI / button: Remove lid_init_state=method mode"

[Zheng, Lv]

Hi, Julian

> From: Julian Wiedmann [mailto:julian.wiedmann@jwi.name]
> Subject: Re: [PATCH 1/5] Revert "ACPI / button: Remove lid_init_state=method mode"
> 
> On 05.05.2017 04:39, Lv Zheng wrote:
> > This reverts commit ecb10b694b72ca5ea51b3c90a71ff2a11963425a.
> >
> > The only expected ACPI control method lid device's usage model is
> > 1. Listen to the lid notification,
> > 2. Evaluate _LID after being notified by BIOS,
> > 3. Suspend the system (if users configure to do so) after seeing "close".
> > It's not ensured that BIOS will notify OS after boot/resume, and
> > it's not ensured that BIOS will always generate "open" event upon
> > opening the lid.
> >
> > But there are 2 wrong usage models:
> > 1. When the lid device is responsible for suspend/resume the system,
> >    userspace requires to see "open" event to be paired with "close" after
> >    the system is resumed, or it will suspend the system again.
> > 2. When an external monitor connects to the laptop attached docks,
> >    userspace requires to see "close" event after the system is resumed so
> >    that it can determine whether the internal display should remain dark
> >    and the external display should be lit on.
> >
> > After we made default kenrel behavior to be suitable for usage model 1,
> > users of usage model 2 start to report regressions for such behavior
> > change.
> >
> > Reversion of button.lid_init_state=method doesn't actually reverts to old
> > default behavior as doing so can enter a regression loop, but facilitates
> > users to work the reported regressions around with
> > button.lid_init_state=method.
> Thanks Lv for doing this.
> 
> >
> > Fixes: 77e9a4aa9de1 ("ACPI / button: Change default behavior to lid_init_state=open")
> To be fair, it doesn't actually fix it - the regression is still there,
> this just allows affected users to work-around it again. Fixing it means
> switching back the default to 'method'.
> Anyway, please add a cc: stable so this is picked up for 4.11.x.

OK, I'll correct the "Fixes" tag and add stable as a cc recipient.

> 
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
> > Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
> > Tested-by: Steffen Weber <steffen.weber@gmail.com>
> > Reported-by: Julian Wiedmann <julian.weidmann@jwi.name>
> Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
> (mind the typo)

OK. Thanks for pointing it out.

Thanks
Lv

> 
> > Reported-by: Joachim Frieben <jfrieben@hotmail.com>
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> >  Documentation/acpi/acpi-lid.txt | 16 ++++++++++++----
> >  drivers/acpi/button.c           |  9 +++++++++
> >  2 files changed, 21 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
> > index 22cb309..effe7af 100644
> > --- a/Documentation/acpi/acpi-lid.txt
> > +++ b/Documentation/acpi/acpi-lid.txt
> > @@ -59,20 +59,28 @@ button driver uses the following 3 modes in order not to trigger issues.
> >  If the userspace hasn't been prepared to ignore the unreliable "opened"
> >  events and the unreliable initial state notification, Linux users can use
> >  the following kernel parameters to handle the possible issues:
> > -A. button.lid_init_state=open:
> > +A. button.lid_init_state=method:
> > +   When this option is specified, the ACPI button driver reports the
> > +   initial lid state using the returning value of the _LID control method
> > +   and whether the "opened"/"closed" events are paired fully relies on the
> > +   firmware implementation.
> > +   This option can be used to fix some platforms where the returning value
> > +   of the _LID control method is reliable but the initial lid state
> > +   notification is missing.
> > +   This option is the default behavior during the period the userspace
> > +   isn't ready to handle the buggy AML tables.
> > +B. button.lid_init_state=open:
> >     When this option is specified, the ACPI button driver always reports the
> >     initial lid state as "opened" and whether the "opened"/"closed" events
> >     are paired fully relies on the firmware implementation.
> >     This may fix some platforms where the returning value of the _LID
> >     control method is not reliable and the initial lid state notification is
> >     missing.
> > -   This option is the default behavior during the period the userspace
> > -   isn't ready to handle the buggy AML tables.
> >
> >  If the userspace has been prepared to ignore the unreliable "opened" events
> >  and the unreliable initial state notification, Linux users should always
> >  use the following kernel parameter:
> > -B. button.lid_init_state=ignore:
> > +C. button.lid_init_state=ignore:
> >     When this option is specified, the ACPI button driver never reports the
> >     initial lid state and there is a compensation mechanism implemented to
> >     ensure that the reliable "closed" notifications can always be delievered
> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> > index 668137e..6d5a8c1 100644
> > --- a/drivers/acpi/button.c
> > +++ b/drivers/acpi/button.c
> > @@ -57,6 +57,7 @@
> >
> >  #define ACPI_BUTTON_LID_INIT_IGNORE	0x00
> >  #define ACPI_BUTTON_LID_INIT_OPEN	0x01
> > +#define ACPI_BUTTON_LID_INIT_METHOD	0x02
> >
> >  #define _COMPONENT		ACPI_BUTTON_COMPONENT
> >  ACPI_MODULE_NAME("button");
> > @@ -376,6 +377,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
> >  	case ACPI_BUTTON_LID_INIT_OPEN:
> >  		(void)acpi_lid_notify_state(device, 1);
> >  		break;
> > +	case ACPI_BUTTON_LID_INIT_METHOD:
> > +		(void)acpi_lid_update_state(device);
> > +		break;
> >  	case ACPI_BUTTON_LID_INIT_IGNORE:
> >  	default:
> >  		break;
> > @@ -559,6 +563,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
> >  	if (!strncmp(val, "open", sizeof("open") - 1)) {
> >  		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> >  		pr_info("Notify initial lid state as open\n");
> > +	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
> > +		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> > +		pr_info("Notify initial lid state with _LID return value\n");
> >  	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
> >  		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> >  		pr_info("Do not notify initial lid state\n");
> > @@ -572,6 +579,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
> >  	switch (lid_init_state) {
> >  	case ACPI_BUTTON_LID_INIT_OPEN:
> >  		return sprintf(buffer, "open");
> > +	case ACPI_BUTTON_LID_INIT_METHOD:
> > +		return sprintf(buffer, "method");
> >  	case ACPI_BUTTON_LID_INIT_IGNORE:
> >  		return sprintf(buffer, "ignore");
> >  	default:
> >

[PATCH v2 1/5] Revert "ACPI / button: Remove lid_init_state=method mode"

[Lv Zheng]

This reverts commit ecb10b694b72ca5ea51b3c90a71ff2a11963425a.

The only expected ACPI control method lid device's usage model is
1. Listen to the lid notification,
2. Evaluate _LID after being notified by BIOS,
3. Suspend the system (if users configure to do so) after seeing "close".
It's not ensured that BIOS will notify OS after boot/resume, and
it's not ensured that BIOS will always generate "open" event upon
opening the lid.

But there are 2 wrong usage models:
1. When the lid device is responsible for suspend/resume the system,
   userspace requires to see "open" event to be paired with "close" after
   the system is resumed, or it will suspend the system again.
2. When an external monitor connects to the laptop attached docks,
   userspace requires to see "close" event after the system is resumed so
   that it can determine whether the internal display should remain dark
   and the external display should be lit on.

After we made default kernel behavior to be suitable for usage model 1,
users of usage model 2 start to report regressions for such behavior
change.

Reversion of button.lid_init_state=method doesn't actually reverts to old
default behavior as doing so can enter a regression loop, but facilitates
users to work the reported regressions around with
button.lid_init_state=method.

Fixes: ecb10b694b72 ("ACPI / button: Remove lid_init_state=method mode")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
Reported-by: Joachim Frieben <jfrieben@hotmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 Documentation/acpi/acpi-lid.txt | 16 ++++++++++++----
 drivers/acpi/button.c           |  9 +++++++++
 2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
index 22cb309..effe7af 100644
--- a/Documentation/acpi/acpi-lid.txt
+++ b/Documentation/acpi/acpi-lid.txt
@@ -59,20 +59,28 @@ button driver uses the following 3 modes in order not to trigger issues.
 If the userspace hasn't been prepared to ignore the unreliable "opened"
 events and the unreliable initial state notification, Linux users can use
 the following kernel parameters to handle the possible issues:
-A. button.lid_init_state=open:
+A. button.lid_init_state=method:
+   When this option is specified, the ACPI button driver reports the
+   initial lid state using the returning value of the _LID control method
+   and whether the "opened"/"closed" events are paired fully relies on the
+   firmware implementation.
+   This option can be used to fix some platforms where the returning value
+   of the _LID control method is reliable but the initial lid state
+   notification is missing.
+   This option is the default behavior during the period the userspace
+   isn't ready to handle the buggy AML tables.
+B. button.lid_init_state=open:
    When this option is specified, the ACPI button driver always reports the
    initial lid state as "opened" and whether the "opened"/"closed" events
    are paired fully relies on the firmware implementation.
    This may fix some platforms where the returning value of the _LID
    control method is not reliable and the initial lid state notification is
    missing.
-   This option is the default behavior during the period the userspace
-   isn't ready to handle the buggy AML tables.
 
 If the userspace has been prepared to ignore the unreliable "opened" events
 and the unreliable initial state notification, Linux users should always
 use the following kernel parameter:
-B. button.lid_init_state=ignore:
+C. button.lid_init_state=ignore:
    When this option is specified, the ACPI button driver never reports the
    initial lid state and there is a compensation mechanism implemented to
    ensure that the reliable "closed" notifications can always be delievered
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 668137e..6d5a8c1 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -57,6 +57,7 @@
 
 #define ACPI_BUTTON_LID_INIT_IGNORE	0x00
 #define ACPI_BUTTON_LID_INIT_OPEN	0x01
+#define ACPI_BUTTON_LID_INIT_METHOD	0x02
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -376,6 +377,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		(void)acpi_lid_notify_state(device, 1);
 		break;
+	case ACPI_BUTTON_LID_INIT_METHOD:
+		(void)acpi_lid_update_state(device);
+		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
 		break;
@@ -559,6 +563,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 		pr_info("Notify initial lid state as open\n");
+	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
+		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+		pr_info("Notify initial lid state with _LID return value\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
 		pr_info("Do not notify initial lid state\n");
@@ -572,6 +579,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		return sprintf(buffer, "open");
+	case ACPI_BUTTON_LID_INIT_METHOD:
+		return sprintf(buffer, "method");
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 		return sprintf(buffer, "ignore");
 	default:
-- 
2.7.4

[PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close

[Lv Zheng]

We have tested that:
1. If ACPI button driver sends "open" to the user space but _LID return
   value to the kernel space, external monitor issues still cannot be fixed
   (link #1, comment #33, test result #2), while
2. if ACPI button driver sends "close" to the user space but _LID return
   value to the kernel space, external monitor issues can be fixed (link
   #1, comment #33, test result #3).
We knew that some platforms require "open" to be sent to the user space to
avoid entering a suspend/resume loop. So we have 2 contradictory user space
requirements and are not possible to fix them both in 1 kernel driver mode
without using platform specific quirks. This actually can also be treated
as a proof that the root causes of the bugs are not in the kernel button
driver but in the user space usage models.

This patch adds button.lid_init_state=close so that it can explicitly
explain the contradictory requirements and help the kernel community to
raise such bugs to the correct responsibles.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 [#1]
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
Reported-by: Joachim Frieben <jfrieben@hotmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 Documentation/acpi/acpi-lid.txt | 12 +++++++-----
 drivers/acpi/button.c           | 11 ++++++++++-
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
index effe7af..e846a59 100644
--- a/Documentation/acpi/acpi-lid.txt
+++ b/Documentation/acpi/acpi-lid.txt
@@ -69,13 +69,15 @@ A. button.lid_init_state=method:
    notification is missing.
    This option is the default behavior during the period the userspace
    isn't ready to handle the buggy AML tables.
-B. button.lid_init_state=open:
-   When this option is specified, the ACPI button driver always reports the
-   initial lid state as "opened" and whether the "opened"/"closed" events
-   are paired fully relies on the firmware implementation.
+B. button.lid_init_state=open/close:
+   When one of these options are specified, the ACPI button driver always
+   reports the initial lid state as fixed "opened"/"closed" and whether the
+   "opened"/"closed" events are paired fully relies on the firmware
+   implementation.
    This may fix some platforms where the returning value of the _LID
    control method is not reliable and the initial lid state notification is
-   missing.
+   missing. Especially useful for platforms where different usage models
+   require contractory initial lid state.
 
 If the userspace has been prepared to ignore the unreliable "opened" events
 and the unreliable initial state notification, Linux users should always
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 6d5a8c1..8b4666f 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -57,7 +57,8 @@
 
 #define ACPI_BUTTON_LID_INIT_IGNORE	0x00
 #define ACPI_BUTTON_LID_INIT_OPEN	0x01
-#define ACPI_BUTTON_LID_INIT_METHOD	0x02
+#define ACPI_BUTTON_LID_INIT_CLOSE	0x02
+#define ACPI_BUTTON_LID_INIT_METHOD	0x03
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -377,6 +378,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		(void)acpi_lid_notify_state(device, 1);
 		break;
+	case ACPI_BUTTON_LID_INIT_CLOSE:
+		(void)acpi_lid_notify_state(device, 0);
+		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		(void)acpi_lid_update_state(device);
 		break;
@@ -563,6 +567,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 		pr_info("Notify initial lid state as open\n");
+	} else if (!strncmp(val, "close", sizeof("close") - 1)) {
+		lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
+		pr_info("Notify initial lid state as close\n");
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 		pr_info("Notify initial lid state with _LID return value\n");
@@ -579,6 +586,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		return sprintf(buffer, "open");
+	case ACPI_BUTTON_LID_INIT_CLOSE:
+		return sprintf(buffer, "close");
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		return sprintf(buffer, "method");
 	case ACPI_BUTTON_LID_INIT_IGNORE:
-- 
2.7.4

Re: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close

[Benjamin Tissoires]

On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> We have tested that:
> 1. If ACPI button driver sends "open" to the user space but _LID return
>    value to the kernel space, external monitor issues still cannot be fixed
>    (link #1, comment #33, test result #2), while
> 2. if ACPI button driver sends "close" to the user space but _LID return
>    value to the kernel space, external monitor issues can be fixed (link
>    #1, comment #33, test result #3).
> We knew that some platforms require "open" to be sent to the user space to
> avoid entering a suspend/resume loop. So we have 2 contradictory user space
> requirements and are not possible to fix them both in 1 kernel driver mode
> without using platform specific quirks. This actually can also be treated
> as a proof that the root causes of the bugs are not in the kernel button
> driver but in the user space usage models.
>
> This patch adds button.lid_init_state=close so that it can explicitly
> explain the contradictory requirements and help the kernel community to
> raise such bugs to the correct responsibles.

Well, I just can't see the difference between "close" and "method".
The intel driver actually triggers the evaluation of _LID, so this
explains why the value gets corrected on platform where the _LID
method is accurate.

And I don't see the point of sending "close" to user space if close
means suspend loops and only fixes a dynamic case where you boot your
laptop with the lid closed. Do you expect users to append this option
at each boot when the lid is closed?

Cheers,
Benjamin

>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 [#1]
> Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
> Tested-by: Steffen Weber <steffen.weber@gmail.com>
> Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
> Reported-by: Joachim Frieben <jfrieben@hotmail.com>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  Documentation/acpi/acpi-lid.txt | 12 +++++++-----
>  drivers/acpi/button.c           | 11 ++++++++++-
>  2 files changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
> index effe7af..e846a59 100644
> --- a/Documentation/acpi/acpi-lid.txt
> +++ b/Documentation/acpi/acpi-lid.txt
> @@ -69,13 +69,15 @@ A. button.lid_init_state=method:
>     notification is missing.
>     This option is the default behavior during the period the userspace
>     isn't ready to handle the buggy AML tables.
> -B. button.lid_init_state=open:
> -   When this option is specified, the ACPI button driver always reports the
> -   initial lid state as "opened" and whether the "opened"/"closed" events
> -   are paired fully relies on the firmware implementation.
> +B. button.lid_init_state=open/close:
> +   When one of these options are specified, the ACPI button driver always
> +   reports the initial lid state as fixed "opened"/"closed" and whether the
> +   "opened"/"closed" events are paired fully relies on the firmware
> +   implementation.
>     This may fix some platforms where the returning value of the _LID
>     control method is not reliable and the initial lid state notification is
> -   missing.
> +   missing. Especially useful for platforms where different usage models
> +   require contractory initial lid state.
>
>  If the userspace has been prepared to ignore the unreliable "opened" events
>  and the unreliable initial state notification, Linux users should always
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 6d5a8c1..8b4666f 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -57,7 +57,8 @@
>
>  #define ACPI_BUTTON_LID_INIT_IGNORE    0x00
>  #define ACPI_BUTTON_LID_INIT_OPEN      0x01
> -#define ACPI_BUTTON_LID_INIT_METHOD    0x02
> +#define ACPI_BUTTON_LID_INIT_CLOSE     0x02
> +#define ACPI_BUTTON_LID_INIT_METHOD    0x03
>
>  #define _COMPONENT             ACPI_BUTTON_COMPONENT
>  ACPI_MODULE_NAME("button");
> @@ -377,6 +378,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>         case ACPI_BUTTON_LID_INIT_OPEN:
>                 (void)acpi_lid_notify_state(device, 1);
>                 break;
> +       case ACPI_BUTTON_LID_INIT_CLOSE:
> +               (void)acpi_lid_notify_state(device, 0);
> +               break;
>         case ACPI_BUTTON_LID_INIT_METHOD:
>                 (void)acpi_lid_update_state(device);
>                 break;
> @@ -563,6 +567,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
>         if (!strncmp(val, "open", sizeof("open") - 1)) {
>                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>                 pr_info("Notify initial lid state as open\n");
> +       } else if (!strncmp(val, "close", sizeof("close") - 1)) {
> +               lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
> +               pr_info("Notify initial lid state as close\n");
>         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
>                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
>                 pr_info("Notify initial lid state with _LID return value\n");
> @@ -579,6 +586,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
>         switch (lid_init_state) {
>         case ACPI_BUTTON_LID_INIT_OPEN:
>                 return sprintf(buffer, "open");
> +       case ACPI_BUTTON_LID_INIT_CLOSE:
> +               return sprintf(buffer, "close");
>         case ACPI_BUTTON_LID_INIT_METHOD:
>                 return sprintf(buffer, "method");
>         case ACPI_BUTTON_LID_INIT_IGNORE:
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close

[Zheng, Lv]

Hi,

> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
> Tissoires
> Subject: Re: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close
> 
> On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> > We have tested that:
> > 1. If ACPI button driver sends "open" to the user space but _LID return
> >    value to the kernel space, external monitor issues still cannot be fixed
> >    (link #1, comment #33, test result #2), while
> > 2. if ACPI button driver sends "close" to the user space but _LID return
> >    value to the kernel space, external monitor issues can be fixed (link
> >    #1, comment #33, test result #3).
> > We knew that some platforms require "open" to be sent to the user space to
> > avoid entering a suspend/resume loop. So we have 2 contradictory user space
> > requirements and are not possible to fix them both in 1 kernel driver mode
> > without using platform specific quirks. This actually can also be treated
> > as a proof that the root causes of the bugs are not in the kernel button
> > driver but in the user space usage models.
> >
> > This patch adds button.lid_init_state=close so that it can explicitly
> > explain the contradictory requirements and help the kernel community to
> > raise such bugs to the correct responsibles.
> 
> Well, I just can't see the difference between "close" and "method".
> The intel driver actually triggers the evaluation of _LID, so this
> explains why the value gets corrected on platform where the _LID
> method is accurate.
> 
> And I don't see the point of sending "close" to user space if close
> means suspend loops and only fixes a dynamic case where you boot your
> laptop with the lid closed. Do you expect users to append this option
> at each boot when the lid is closed?

There in fact is a difference.
If a BIOS implements _LID using cached value.
And BIOS AML code never generates lid notification after boot/resume.
And the _LID default value is "open" after boot/resume.

Then let's compare:
1. after boot:
1.1. button.lid_init_state=method sends open to the user space
1.2. button.lid_init_state=close sends close to the user space
2. after resume:
1.1. button.lid_init_state=method sends open to the user space
1.2. button.lid_init_state=close sends close to the user space

See, that's the difference.

If there is such a platform, for the reported user space issues,
button.lid_init_state=method cannot work for them,
they'll have to use button.lid_init_state=close
to achieve the expected behavior.

So I believe this mode is useful.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 [#1]
> > Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
> > Tested-by: Steffen Weber <steffen.weber@gmail.com>
> > Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
> > Reported-by: Joachim Frieben <jfrieben@hotmail.com>
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> >  Documentation/acpi/acpi-lid.txt | 12 +++++++-----
> >  drivers/acpi/button.c           | 11 ++++++++++-
> >  2 files changed, 17 insertions(+), 6 deletions(-)
> >
> > diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
> > index effe7af..e846a59 100644
> > --- a/Documentation/acpi/acpi-lid.txt
> > +++ b/Documentation/acpi/acpi-lid.txt
> > @@ -69,13 +69,15 @@ A. button.lid_init_state=method:
> >     notification is missing.
> >     This option is the default behavior during the period the userspace
> >     isn't ready to handle the buggy AML tables.
> > -B. button.lid_init_state=open:
> > -   When this option is specified, the ACPI button driver always reports the
> > -   initial lid state as "opened" and whether the "opened"/"closed" events
> > -   are paired fully relies on the firmware implementation.
> > +B. button.lid_init_state=open/close:
> > +   When one of these options are specified, the ACPI button driver always
> > +   reports the initial lid state as fixed "opened"/"closed" and whether the
> > +   "opened"/"closed" events are paired fully relies on the firmware
> > +   implementation.
> >     This may fix some platforms where the returning value of the _LID
> >     control method is not reliable and the initial lid state notification is
> > -   missing.
> > +   missing. Especially useful for platforms where different usage models
> > +   require contractory initial lid state.
> >
> >  If the userspace has been prepared to ignore the unreliable "opened" events
> >  and the unreliable initial state notification, Linux users should always
> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> > index 6d5a8c1..8b4666f 100644
> > --- a/drivers/acpi/button.c
> > +++ b/drivers/acpi/button.c
> > @@ -57,7 +57,8 @@
> >
> >  #define ACPI_BUTTON_LID_INIT_IGNORE    0x00
> >  #define ACPI_BUTTON_LID_INIT_OPEN      0x01
> > -#define ACPI_BUTTON_LID_INIT_METHOD    0x02
> > +#define ACPI_BUTTON_LID_INIT_CLOSE     0x02
> > +#define ACPI_BUTTON_LID_INIT_METHOD    0x03
> >
> >  #define _COMPONENT             ACPI_BUTTON_COMPONENT
> >  ACPI_MODULE_NAME("button");
> > @@ -377,6 +378,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
> >         case ACPI_BUTTON_LID_INIT_OPEN:
> >                 (void)acpi_lid_notify_state(device, 1);
> >                 break;
> > +       case ACPI_BUTTON_LID_INIT_CLOSE:
> > +               (void)acpi_lid_notify_state(device, 0);
> > +               break;
> >         case ACPI_BUTTON_LID_INIT_METHOD:
> >                 (void)acpi_lid_update_state(device);
> >                 break;
> > @@ -563,6 +567,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
> >         if (!strncmp(val, "open", sizeof("open") - 1)) {
> >                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> >                 pr_info("Notify initial lid state as open\n");
> > +       } else if (!strncmp(val, "close", sizeof("close") - 1)) {
> > +               lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
> > +               pr_info("Notify initial lid state as close\n");
> >         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
> >                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> >                 pr_info("Notify initial lid state with _LID return value\n");
> > @@ -579,6 +586,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
> >         switch (lid_init_state) {
> >         case ACPI_BUTTON_LID_INIT_OPEN:
> >                 return sprintf(buffer, "open");
> > +       case ACPI_BUTTON_LID_INIT_CLOSE:
> > +               return sprintf(buffer, "close");
> >         case ACPI_BUTTON_LID_INIT_METHOD:
> >                 return sprintf(buffer, "method");
> >         case ACPI_BUTTON_LID_INIT_IGNORE:
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close

[Benjamin Tissoires]

On Fri, May 12, 2017 at 3:31 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
> Hi,
>
>> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
>> Tissoires
>> Subject: Re: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close
>>
>> On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
>> > We have tested that:
>> > 1. If ACPI button driver sends "open" to the user space but _LID return
>> >    value to the kernel space, external monitor issues still cannot be fixed
>> >    (link #1, comment #33, test result #2), while
>> > 2. if ACPI button driver sends "close" to the user space but _LID return
>> >    value to the kernel space, external monitor issues can be fixed (link
>> >    #1, comment #33, test result #3).
>> > We knew that some platforms require "open" to be sent to the user space to
>> > avoid entering a suspend/resume loop. So we have 2 contradictory user space
>> > requirements and are not possible to fix them both in 1 kernel driver mode
>> > without using platform specific quirks. This actually can also be treated
>> > as a proof that the root causes of the bugs are not in the kernel button
>> > driver but in the user space usage models.
>> >
>> > This patch adds button.lid_init_state=close so that it can explicitly
>> > explain the contradictory requirements and help the kernel community to
>> > raise such bugs to the correct responsibles.
>>
>> Well, I just can't see the difference between "close" and "method".
>> The intel driver actually triggers the evaluation of _LID, so this
>> explains why the value gets corrected on platform where the _LID
>> method is accurate.
>>
>> And I don't see the point of sending "close" to user space if close
>> means suspend loops and only fixes a dynamic case where you boot your
>> laptop with the lid closed. Do you expect users to append this option
>> at each boot when the lid is closed?
>
> There in fact is a difference.
> If a BIOS implements _LID using cached value.
> And BIOS AML code never generates lid notification after boot/resume.
> And the _LID default value is "open" after boot/resume.
>
> Then let's compare:
> 1. after boot:
> 1.1. button.lid_init_state=method sends open to the user space
> 1.2. button.lid_init_state=close sends close to the user space
> 2. after resume:
> 1.1. button.lid_init_state=method sends open to the user space
> 1.2. button.lid_init_state=close sends close to the user space
>
> See, that's the difference.
>
> If there is such a platform, for the reported user space issues,
> button.lid_init_state=method cannot work for them,
> they'll have to use button.lid_init_state=close
> to achieve the expected behavior.
>
> So I believe this mode is useful.

I don't buy it because you are missing a parameter here: what is the
actual state of the lid (open or closed).
And if you report "close" while it's opened, that's not good.

So maybe, it can be interesting for debugging, but for end users, I
don't see why anyone would use it. Because a laptop can be moved,
docked or not, and this is a static parameter. So there will always be
a state where you will be reporting a false state.

Cheers,
Benjamin

>
> Cheers,
> Lv
>
>>
>> Cheers,
>> Benjamin
>>
>> >
>> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 [#1]
>> > Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
>> > Tested-by: Steffen Weber <steffen.weber@gmail.com>
>> > Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
>> > Reported-by: Joachim Frieben <jfrieben@hotmail.com>
>> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
>> > ---
>> >  Documentation/acpi/acpi-lid.txt | 12 +++++++-----
>> >  drivers/acpi/button.c           | 11 ++++++++++-
>> >  2 files changed, 17 insertions(+), 6 deletions(-)
>> >
>> > diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
>> > index effe7af..e846a59 100644
>> > --- a/Documentation/acpi/acpi-lid.txt
>> > +++ b/Documentation/acpi/acpi-lid.txt
>> > @@ -69,13 +69,15 @@ A. button.lid_init_state=method:
>> >     notification is missing.
>> >     This option is the default behavior during the period the userspace
>> >     isn't ready to handle the buggy AML tables.
>> > -B. button.lid_init_state=open:
>> > -   When this option is specified, the ACPI button driver always reports the
>> > -   initial lid state as "opened" and whether the "opened"/"closed" events
>> > -   are paired fully relies on the firmware implementation.
>> > +B. button.lid_init_state=open/close:
>> > +   When one of these options are specified, the ACPI button driver always
>> > +   reports the initial lid state as fixed "opened"/"closed" and whether the
>> > +   "opened"/"closed" events are paired fully relies on the firmware
>> > +   implementation.
>> >     This may fix some platforms where the returning value of the _LID
>> >     control method is not reliable and the initial lid state notification is
>> > -   missing.
>> > +   missing. Especially useful for platforms where different usage models
>> > +   require contractory initial lid state.
>> >
>> >  If the userspace has been prepared to ignore the unreliable "opened" events
>> >  and the unreliable initial state notification, Linux users should always
>> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
>> > index 6d5a8c1..8b4666f 100644
>> > --- a/drivers/acpi/button.c
>> > +++ b/drivers/acpi/button.c
>> > @@ -57,7 +57,8 @@
>> >
>> >  #define ACPI_BUTTON_LID_INIT_IGNORE    0x00
>> >  #define ACPI_BUTTON_LID_INIT_OPEN      0x01
>> > -#define ACPI_BUTTON_LID_INIT_METHOD    0x02
>> > +#define ACPI_BUTTON_LID_INIT_CLOSE     0x02
>> > +#define ACPI_BUTTON_LID_INIT_METHOD    0x03
>> >
>> >  #define _COMPONENT             ACPI_BUTTON_COMPONENT
>> >  ACPI_MODULE_NAME("button");
>> > @@ -377,6 +378,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>> >         case ACPI_BUTTON_LID_INIT_OPEN:
>> >                 (void)acpi_lid_notify_state(device, 1);
>> >                 break;
>> > +       case ACPI_BUTTON_LID_INIT_CLOSE:
>> > +               (void)acpi_lid_notify_state(device, 0);
>> > +               break;
>> >         case ACPI_BUTTON_LID_INIT_METHOD:
>> >                 (void)acpi_lid_update_state(device);
>> >                 break;
>> > @@ -563,6 +567,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
>> >         if (!strncmp(val, "open", sizeof("open") - 1)) {
>> >                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>> >                 pr_info("Notify initial lid state as open\n");
>> > +       } else if (!strncmp(val, "close", sizeof("close") - 1)) {
>> > +               lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
>> > +               pr_info("Notify initial lid state as close\n");
>> >         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
>> >                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
>> >                 pr_info("Notify initial lid state with _LID return value\n");
>> > @@ -579,6 +586,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
>> >         switch (lid_init_state) {
>> >         case ACPI_BUTTON_LID_INIT_OPEN:
>> >                 return sprintf(buffer, "open");
>> > +       case ACPI_BUTTON_LID_INIT_CLOSE:
>> > +               return sprintf(buffer, "close");
>> >         case ACPI_BUTTON_LID_INIT_METHOD:
>> >                 return sprintf(buffer, "method");
>> >         case ACPI_BUTTON_LID_INIT_IGNORE:
>> > --
>> > 2.7.4
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> > the body of a message to majordomo@vger.kernel.org
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close

[Zheng, Lv]

Hi, Benjamin

> From: Benjamin Tissoires [mailto:benjamin.tissoires@gmail.com]
> Subject: Re: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close
> 
> On Fri, May 12, 2017 at 3:31 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
> > Hi,
> >
> >> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of
> Benjamin
> >> Tissoires
> >> Subject: Re: [PATCH v2 2/5] ACPI: button: Add button.lid_init_state=close
> >>
> >> On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> >> > We have tested that:
> >> > 1. If ACPI button driver sends "open" to the user space but _LID return
> >> >    value to the kernel space, external monitor issues still cannot be fixed
> >> >    (link #1, comment #33, test result #2), while
> >> > 2. if ACPI button driver sends "close" to the user space but _LID return
> >> >    value to the kernel space, external monitor issues can be fixed (link
> >> >    #1, comment #33, test result #3).
> >> > We knew that some platforms require "open" to be sent to the user space to
> >> > avoid entering a suspend/resume loop. So we have 2 contradictory user space
> >> > requirements and are not possible to fix them both in 1 kernel driver mode
> >> > without using platform specific quirks. This actually can also be treated
> >> > as a proof that the root causes of the bugs are not in the kernel button
> >> > driver but in the user space usage models.
> >> >
> >> > This patch adds button.lid_init_state=close so that it can explicitly
> >> > explain the contradictory requirements and help the kernel community to
> >> > raise such bugs to the correct responsibles.
> >>
> >> Well, I just can't see the difference between "close" and "method".
> >> The intel driver actually triggers the evaluation of _LID, so this
> >> explains why the value gets corrected on platform where the _LID
> >> method is accurate.
> >>
> >> And I don't see the point of sending "close" to user space if close
> >> means suspend loops and only fixes a dynamic case where you boot your
> >> laptop with the lid closed. Do you expect users to append this option
> >> at each boot when the lid is closed?
> >
> > There in fact is a difference.
> > If a BIOS implements _LID using cached value.
> > And BIOS AML code never generates lid notification after boot/resume.
> > And the _LID default value is "open" after boot/resume.
> >
> > Then let's compare:
> > 1. after boot:
> > 1.1. button.lid_init_state=method sends open to the user space
> > 1.2. button.lid_init_state=close sends close to the user space
> > 2. after resume:
> > 1.1. button.lid_init_state=method sends open to the user space
> > 1.2. button.lid_init_state=close sends close to the user space
> >
> > See, that's the difference.
> >
> > If there is such a platform, for the reported user space issues,
> > button.lid_init_state=method cannot work for them,
> > they'll have to use button.lid_init_state=close
> > to achieve the expected behavior.
> >
> > So I believe this mode is useful.
> 
> I don't buy it because you are missing a parameter here: what is the
> actual state of the lid (open or closed).
> And if you report "close" while it's opened, that's not good.

I think you have something wrong here.
In fact button driver doesn't want to report anything here.
And it actually won't anything wrong thing if button.lid_init_state=ignore is specified.

The wrong states the user space/kernel space received are because of the user space wrong expectation against what ACPI control method lid device is providing.

> 
> So maybe, it can be interesting for debugging, but for end users, I
> don't see why anyone would use it. Because a laptop can be moved,
> docked or not, and this is a static parameter. So there will always be
> a state where you will be reporting a false state.

There is no false state report.
User space programs get the false state because they want button driver to work in button.lid_init_state=method mode.
While BIOS expects the ACPI button driver to work in button.lid_init_state=ignore.

So if user space really wants something beyond what ACPI control method lid device can provide.
IMO, button driver is ok to provide "workaround" modes for them.
Then after that, everything should be done on their own.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> >
> > Cheers,
> > Lv
> >
> >>
> >> Cheers,
> >> Benjamin
> >>
> >> >
> >> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 [#1]
> >> > Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
> >> > Tested-by: Steffen Weber <steffen.weber@gmail.com>
> >> > Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
> >> > Reported-by: Joachim Frieben <jfrieben@hotmail.com>
> >> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> >> > ---
> >> >  Documentation/acpi/acpi-lid.txt | 12 +++++++-----
> >> >  drivers/acpi/button.c           | 11 ++++++++++-
> >> >  2 files changed, 17 insertions(+), 6 deletions(-)
> >> >
> >> > diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/acpi/acpi-lid.txt
> >> > index effe7af..e846a59 100644
> >> > --- a/Documentation/acpi/acpi-lid.txt
> >> > +++ b/Documentation/acpi/acpi-lid.txt
> >> > @@ -69,13 +69,15 @@ A. button.lid_init_state=method:
> >> >     notification is missing.
> >> >     This option is the default behavior during the period the userspace
> >> >     isn't ready to handle the buggy AML tables.
> >> > -B. button.lid_init_state=open:
> >> > -   When this option is specified, the ACPI button driver always reports the
> >> > -   initial lid state as "opened" and whether the "opened"/"closed" events
> >> > -   are paired fully relies on the firmware implementation.
> >> > +B. button.lid_init_state=open/close:
> >> > +   When one of these options are specified, the ACPI button driver always
> >> > +   reports the initial lid state as fixed "opened"/"closed" and whether the
> >> > +   "opened"/"closed" events are paired fully relies on the firmware
> >> > +   implementation.
> >> >     This may fix some platforms where the returning value of the _LID
> >> >     control method is not reliable and the initial lid state notification is
> >> > -   missing.
> >> > +   missing. Especially useful for platforms where different usage models
> >> > +   require contractory initial lid state.
> >> >
> >> >  If the userspace has been prepared to ignore the unreliable "opened" events
> >> >  and the unreliable initial state notification, Linux users should always
> >> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> >> > index 6d5a8c1..8b4666f 100644
> >> > --- a/drivers/acpi/button.c
> >> > +++ b/drivers/acpi/button.c
> >> > @@ -57,7 +57,8 @@
> >> >
> >> >  #define ACPI_BUTTON_LID_INIT_IGNORE    0x00
> >> >  #define ACPI_BUTTON_LID_INIT_OPEN      0x01
> >> > -#define ACPI_BUTTON_LID_INIT_METHOD    0x02
> >> > +#define ACPI_BUTTON_LID_INIT_CLOSE     0x02
> >> > +#define ACPI_BUTTON_LID_INIT_METHOD    0x03
> >> >
> >> >  #define _COMPONENT             ACPI_BUTTON_COMPONENT
> >> >  ACPI_MODULE_NAME("button");
> >> > @@ -377,6 +378,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
> >> >         case ACPI_BUTTON_LID_INIT_OPEN:
> >> >                 (void)acpi_lid_notify_state(device, 1);
> >> >                 break;
> >> > +       case ACPI_BUTTON_LID_INIT_CLOSE:
> >> > +               (void)acpi_lid_notify_state(device, 0);
> >> > +               break;
> >> >         case ACPI_BUTTON_LID_INIT_METHOD:
> >> >                 (void)acpi_lid_update_state(device);
> >> >                 break;
> >> > @@ -563,6 +567,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
> >> >         if (!strncmp(val, "open", sizeof("open") - 1)) {
> >> >                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> >> >                 pr_info("Notify initial lid state as open\n");
> >> > +       } else if (!strncmp(val, "close", sizeof("close") - 1)) {
> >> > +               lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
> >> > +               pr_info("Notify initial lid state as close\n");
> >> >         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
> >> >                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> >> >                 pr_info("Notify initial lid state with _LID return value\n");
> >> > @@ -579,6 +586,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
> >> >         switch (lid_init_state) {
> >> >         case ACPI_BUTTON_LID_INIT_OPEN:
> >> >                 return sprintf(buffer, "open");
> >> > +       case ACPI_BUTTON_LID_INIT_CLOSE:
> >> > +               return sprintf(buffer, "close");
> >> >         case ACPI_BUTTON_LID_INIT_METHOD:
> >> >                 return sprintf(buffer, "method");
> >> >         case ACPI_BUTTON_LID_INIT_IGNORE:
> >> > --
> >> > 2.7.4
> >> >
> >> > --
> >> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> >> > the body of a message to majordomo@vger.kernel.org
> >> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/5] ACPI: button: Fix lid notification

[Lv Zheng]

In acpi_lid_notify_state(), it now contains logic to avoid duplicate
notifications which originally was ensured by using blocking notifier. On
the contrary, using blocking notifier is wrong as it could keep on
returning NOTIFY_DONE, causing events lost.
This patch thus changes lid notification to atomic notifier in order not to
have events lost.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 8b4666f..b91ff86 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -112,7 +112,7 @@ struct acpi_button {
 	bool suspended;
 };
 
-static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
+static ATOMIC_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 
@@ -139,10 +139,9 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device, int state)
+static void acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
-	int ret;
 	ktime_t next_report;
 	bool do_update;
 
@@ -220,18 +219,7 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
-	ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
-	if (ret == NOTIFY_DONE)
-		ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
-						   device);
-	if (ret == NOTIFY_DONE || ret == NOTIFY_OK) {
-		/*
-		 * It is also regarded as success if the notifier_chain
-		 * returns NOTIFY_OK or NOTIFY_DONE.
-		 */
-		ret = 0;
-	}
-	return ret;
+	atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -342,13 +330,13 @@ static int acpi_button_remove_fs(struct acpi_device *device)
    -------------------------------------------------------------------------- */
 int acpi_lid_notifier_register(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
+	return atomic_notifier_chain_register(&acpi_lid_notifier, nb);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_register);
 
 int acpi_lid_notifier_unregister(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	return atomic_notifier_chain_unregister(&acpi_lid_notifier, nb);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_unregister);
 
@@ -369,7 +357,8 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	if (state < 0)
 		return state;
 
-	return acpi_lid_notify_state(device, state);
+	acpi_lid_notify_state(device, state);
+	return 0;
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
-- 
2.7.4

Re: [PATCH v2 3/5] ACPI: button: Fix lid notification

[Benjamin Tissoires]

On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> In acpi_lid_notify_state(), it now contains logic to avoid duplicate
> notifications which originally was ensured by using blocking notifier. On
> the contrary, using blocking notifier is wrong as it could keep on
> returning NOTIFY_DONE, causing events lost.
> This patch thus changes lid notification to atomic notifier in order not to
> have events lost.
>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---

Looks good to me:
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Cheers,
Benjamin


>  drivers/acpi/button.c | 25 +++++++------------------
>  1 file changed, 7 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 8b4666f..b91ff86 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -112,7 +112,7 @@ struct acpi_button {
>         bool suspended;
>  };
>
> -static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
> +static ATOMIC_NOTIFIER_HEAD(acpi_lid_notifier);
>  static struct acpi_device *lid_device;
>  static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>
> @@ -139,10 +139,9 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
>         return lid_state ? 1 : 0;
>  }
>
> -static int acpi_lid_notify_state(struct acpi_device *device, int state)
> +static void acpi_lid_notify_state(struct acpi_device *device, int state)
>  {
>         struct acpi_button *button = acpi_driver_data(device);
> -       int ret;
>         ktime_t next_report;
>         bool do_update;
>
> @@ -220,18 +219,7 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
>         if (state)
>                 pm_wakeup_event(&device->dev, 0);
>
> -       ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
> -       if (ret == NOTIFY_DONE)
> -               ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
> -                                                  device);
> -       if (ret == NOTIFY_DONE || ret == NOTIFY_OK) {
> -               /*
> -                * It is also regarded as success if the notifier_chain
> -                * returns NOTIFY_OK or NOTIFY_DONE.
> -                */
> -               ret = 0;
> -       }
> -       return ret;
> +       atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
>  }
>
>  static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
> @@ -342,13 +330,13 @@ static int acpi_button_remove_fs(struct acpi_device *device)
>     -------------------------------------------------------------------------- */
>  int acpi_lid_notifier_register(struct notifier_block *nb)
>  {
> -       return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
> +       return atomic_notifier_chain_register(&acpi_lid_notifier, nb);
>  }
>  EXPORT_SYMBOL(acpi_lid_notifier_register);
>
>  int acpi_lid_notifier_unregister(struct notifier_block *nb)
>  {
> -       return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
> +       return atomic_notifier_chain_unregister(&acpi_lid_notifier, nb);
>  }
>  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
>
> @@ -369,7 +357,8 @@ static int acpi_lid_update_state(struct acpi_device *device)
>         if (state < 0)
>                 return state;
>
> -       return acpi_lid_notify_state(device, state);
> +       acpi_lid_notify_state(device, state);
> +       return 0;
>  }
>
>  static void acpi_lid_initialize_state(struct acpi_device *device)
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value

[Lv Zheng]

Both nouveau and i915, the only 2 kernel space lid notification listeners,
invoke acpi_lid_open() API to obtain _LID returning value instead of using
the notified value.

So this patch moves this logic from listeners to lid driver, always notify
kernel space listeners using _LID returning value.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index b91ff86..7ff3a75 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
+static bool lid_fake_events __read_mostly = true;
+module_param(lid_fake_events, bool, 0644);
+MODULE_PARM_DESC(lid_fake_events, "Deliver fake events to kernel drivers");
 
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
@@ -139,7 +142,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static void acpi_lid_notify_state(struct acpi_device *device, int state)
+static void acpi_lid_notify_state(struct acpi_device *device,
+				  int state, bool bios_notify)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	ktime_t next_report;
@@ -219,7 +223,11 @@ static void acpi_lid_notify_state(struct acpi_device *device, int state)
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
-	atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
+	if (bios_notify)
+		atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
+	else if (lid_fake_events)
+		atomic_notifier_call_chain(&acpi_lid_notifier,
+			acpi_lid_evaluate_state(device), device);
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -349,7 +357,8 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device)
+static int acpi_lid_update_state(struct acpi_device *device,
+				 bool bios_notify)
 {
 	int state;
 
@@ -357,7 +366,7 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	if (state < 0)
 		return state;
 
-	acpi_lid_notify_state(device, state);
+	acpi_lid_notify_state(device, state, bios_notify);
 	return 0;
 }
 
@@ -365,13 +374,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1);
+		(void)acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_CLOSE:
-		(void)acpi_lid_notify_state(device, 0);
+		(void)acpi_lid_notify_state(device, 0, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device);
+		(void)acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -391,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
-			acpi_lid_update_state(device);
+			acpi_lid_update_state(device, true);
 		} else {
 			int keycode;
 
@@ -555,13 +564,13 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
-		pr_info("Notify initial lid state as open\n");
+		pr_info("Notify initial lid state to users space as open and kernel drivers with _LID return value\n");
 	} else if (!strncmp(val, "close", sizeof("close") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
-		pr_info("Notify initial lid state as close\n");
+		pr_info("Notify initial lid state to user space as close and kernel drivers with _LID return value\n");
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
-		pr_info("Notify initial lid state with _LID return value\n");
+		pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
 		pr_info("Do not notify initial lid state\n");
-- 
2.7.4

Re: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value

[Benjamin Tissoires]

On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> Both nouveau and i915, the only 2 kernel space lid notification listeners,
> invoke acpi_lid_open() API to obtain _LID returning value instead of using
> the notified value.
>
> So this patch moves this logic from listeners to lid driver, always notify
> kernel space listeners using _LID returning value.
>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c | 31 ++++++++++++++++++++-----------
>  1 file changed, 20 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index b91ff86..7ff3a75 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>  static unsigned long lid_report_interval __read_mostly = 500;
>  module_param(lid_report_interval, ulong, 0644);
>  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> +static bool lid_fake_events __read_mostly = true;
> +module_param(lid_fake_events, bool, 0644);
> +MODULE_PARM_DESC(lid_fake_events, "Deliver fake events to kernel drivers");
>
>  /* --------------------------------------------------------------------------
>                                FS Interface (/proc)
> @@ -139,7 +142,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
>         return lid_state ? 1 : 0;
>  }
>
> -static void acpi_lid_notify_state(struct acpi_device *device, int state)
> +static void acpi_lid_notify_state(struct acpi_device *device,
> +                                 int state, bool bios_notify)
>  {
>         struct acpi_button *button = acpi_driver_data(device);
>         ktime_t next_report;
> @@ -219,7 +223,11 @@ static void acpi_lid_notify_state(struct acpi_device *device, int state)
>         if (state)
>                 pm_wakeup_event(&device->dev, 0);
>
> -       atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
> +       if (bios_notify)
> +               atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
> +       else if (lid_fake_events)
> +               atomic_notifier_call_chain(&acpi_lid_notifier,
> +                       acpi_lid_evaluate_state(device), device);

I don't quite get the "lid_fake_event" parameter. If set, you are
forwarding the evaluated method, which should be correct, not faked...

Also, what if bios_notify is false and so is lid_fake_events? Is that
expected that no events are forwarded?

Honestly, adding one more kernel parameter doesn't seem to solve
anything, it just adds more blur on a blurry situation.

How about:
- you keep the "ignore", "method" and "open" (because they are kernel
API now) and don't add more
- you revert the "method" initial lid state, as requested by me and
others hitting the docking station "bug"
- you just let user space deal with false lid switch values by
forwarding the bugs to libinput.

IMO, we don't need such patch.

Cheers,
Benjamin

>  }
>
>  static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
> @@ -349,7 +357,8 @@ int acpi_lid_open(void)
>  }
>  EXPORT_SYMBOL(acpi_lid_open);
>
> -static int acpi_lid_update_state(struct acpi_device *device)
> +static int acpi_lid_update_state(struct acpi_device *device,
> +                                bool bios_notify)
>  {
>         int state;
>
> @@ -357,7 +366,7 @@ static int acpi_lid_update_state(struct acpi_device *device)
>         if (state < 0)
>                 return state;
>
> -       acpi_lid_notify_state(device, state);
> +       acpi_lid_notify_state(device, state, bios_notify);
>         return 0;
>  }
>
> @@ -365,13 +374,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>  {
>         switch (lid_init_state) {
>         case ACPI_BUTTON_LID_INIT_OPEN:
> -               (void)acpi_lid_notify_state(device, 1);
> +               (void)acpi_lid_notify_state(device, 1, false);
>                 break;
>         case ACPI_BUTTON_LID_INIT_CLOSE:
> -               (void)acpi_lid_notify_state(device, 0);
> +               (void)acpi_lid_notify_state(device, 0, false);
>                 break;
>         case ACPI_BUTTON_LID_INIT_METHOD:
> -               (void)acpi_lid_update_state(device);
> +               (void)acpi_lid_update_state(device, false);
>                 break;
>         case ACPI_BUTTON_LID_INIT_IGNORE:
>         default:
> @@ -391,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
>         case ACPI_BUTTON_NOTIFY_STATUS:
>                 input = button->input;
>                 if (button->type == ACPI_BUTTON_TYPE_LID) {
> -                       acpi_lid_update_state(device);
> +                       acpi_lid_update_state(device, true);
>                 } else {
>                         int keycode;
>
> @@ -555,13 +564,13 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
>
>         if (!strncmp(val, "open", sizeof("open") - 1)) {
>                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> -               pr_info("Notify initial lid state as open\n");
> +               pr_info("Notify initial lid state to users space as open and kernel drivers with _LID return value\n");
>         } else if (!strncmp(val, "close", sizeof("close") - 1)) {
>                 lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
> -               pr_info("Notify initial lid state as close\n");
> +               pr_info("Notify initial lid state to user space as close and kernel drivers with _LID return value\n");
>         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
>                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> -               pr_info("Notify initial lid state with _LID return value\n");
> +               pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
>         } else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
>                 lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
>                 pr_info("Do not notify initial lid state\n");
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value

[Zheng, Lv]

Hi,

> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
> Tissoires
> Subject: Re: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value
> 
> On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> > Both nouveau and i915, the only 2 kernel space lid notification listeners,
> > invoke acpi_lid_open() API to obtain _LID returning value instead of using
> > the notified value.
> >
> > So this patch moves this logic from listeners to lid driver, always notify
> > kernel space listeners using _LID returning value.
> >
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> >  drivers/acpi/button.c | 31 ++++++++++++++++++++-----------
> >  1 file changed, 20 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> > index b91ff86..7ff3a75 100644
> > --- a/drivers/acpi/button.c
> > +++ b/drivers/acpi/button.c
> > @@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> >  static unsigned long lid_report_interval __read_mostly = 500;
> >  module_param(lid_report_interval, ulong, 0644);
> >  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> > +static bool lid_fake_events __read_mostly = true;
> > +module_param(lid_fake_events, bool, 0644);
> > +MODULE_PARM_DESC(lid_fake_events, "Deliver fake events to kernel drivers");
> >
> >  /* --------------------------------------------------------------------------
> >                                FS Interface (/proc)
> > @@ -139,7 +142,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
> >         return lid_state ? 1 : 0;
> >  }
> >
> > -static void acpi_lid_notify_state(struct acpi_device *device, int state)
> > +static void acpi_lid_notify_state(struct acpi_device *device,
> > +                                 int state, bool bios_notify)
> >  {
> >         struct acpi_button *button = acpi_driver_data(device);
> >         ktime_t next_report;
> > @@ -219,7 +223,11 @@ static void acpi_lid_notify_state(struct acpi_device *device, int state)
> >         if (state)
> >                 pm_wakeup_event(&device->dev, 0);
> >
> > -       atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
> > +       if (bios_notify)
> > +               atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
> > +       else if (lid_fake_events)
> > +               atomic_notifier_call_chain(&acpi_lid_notifier,
> > +                       acpi_lid_evaluate_state(device), device);
> 
> I don't quite get the "lid_fake_event" parameter. If set, you are
> forwarding the evaluated method, which should be correct, not faked...

Fake means the event is generated by kernel.
BIOS didn't generate the event.
Maybe we could name it differently.

> 
> Also, what if bios_notify is false and so is lid_fake_events? Is that
> expected that no events are forwarded?

When bios_notify=true:
1. the button driver evaluates _LID upon seeing a BIOS notification and
2. the lid event notifier just forwards _LID return value to the listeners.
When bios_notify=false:
1. this is only happen when the platform reboots/resumes,
2. the button driver just fakes (sorry I used fake again) an event without seeing any BIOS notification, and
3. the lid event notifier sends the faked event to the listeners. Originally, What has been sent to the listeners:
3.1. sends "open" to the listeners when button.lid_init_state=open,
3.2. sends "close" to the listeners when button.lid_init_state=close,
3.3. sends _LID return value to the listeners when button.lid_init_state=method.

So let's check the listener side (who invokes acpi_lid_notifier_register()).
The only acpi_lid_notifier_register() invoker is drivers/gpu/drm/i915/intel_lvds.c.

If you check its implementation (also you can see its code in PATCH 5/5).
It cares no about what we send.
Whatever we send "open/close/eval(_LID)" to it, it just invokes acpi_lid_open() API to obtain the _LID return value.
While button driver's preference is remove acpi_lid_open() and let the listeners use the notified value instead.

If the listener do not use the notified value, there is a time slice between lid notification and the _LID evaluation.
We should put some synchronization mechanism around around the 2 actions in button driver to make the result more trustworthy.
So we trend to just send what the listener want to them and leave the possibility of implementing such usage model in button driver.

> 
> Honestly, adding one more kernel parameter doesn't seem to solve
> anything, it just adds more blur on a blurry situation.
> 
> How about:
> - you keep the "ignore", "method" and "open" (because they are kernel
> API now) and don't add more
> - you revert the "method" initial lid state, as requested by me and
> others hitting the docking station "bug"

Let's talk about this in different email.

> - you just let user space deal with false lid switch values by
> forwarding the bugs to libinput.
> 
> IMO, we don't need such patch.

This patch is developed to eliminate acpi_lid_open() in order to enforce the following usage model:

All lid event notifier should use the notified value in their callback.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> >  }
> >
> >  static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
> > @@ -349,7 +357,8 @@ int acpi_lid_open(void)
> >  }
> >  EXPORT_SYMBOL(acpi_lid_open);
> >
> > -static int acpi_lid_update_state(struct acpi_device *device)
> > +static int acpi_lid_update_state(struct acpi_device *device,
> > +                                bool bios_notify)
> >  {
> >         int state;
> >
> > @@ -357,7 +366,7 @@ static int acpi_lid_update_state(struct acpi_device *device)
> >         if (state < 0)
> >                 return state;
> >
> > -       acpi_lid_notify_state(device, state);
> > +       acpi_lid_notify_state(device, state, bios_notify);
> >         return 0;
> >  }
> >
> > @@ -365,13 +374,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
> >  {
> >         switch (lid_init_state) {
> >         case ACPI_BUTTON_LID_INIT_OPEN:
> > -               (void)acpi_lid_notify_state(device, 1);
> > +               (void)acpi_lid_notify_state(device, 1, false);
> >                 break;
> >         case ACPI_BUTTON_LID_INIT_CLOSE:
> > -               (void)acpi_lid_notify_state(device, 0);
> > +               (void)acpi_lid_notify_state(device, 0, false);
> >                 break;
> >         case ACPI_BUTTON_LID_INIT_METHOD:
> > -               (void)acpi_lid_update_state(device);
> > +               (void)acpi_lid_update_state(device, false);
> >                 break;
> >         case ACPI_BUTTON_LID_INIT_IGNORE:
> >         default:
> > @@ -391,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
> >         case ACPI_BUTTON_NOTIFY_STATUS:
> >                 input = button->input;
> >                 if (button->type == ACPI_BUTTON_TYPE_LID) {
> > -                       acpi_lid_update_state(device);
> > +                       acpi_lid_update_state(device, true);
> >                 } else {
> >                         int keycode;
> >
> > @@ -555,13 +564,13 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
> >
> >         if (!strncmp(val, "open", sizeof("open") - 1)) {
> >                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> > -               pr_info("Notify initial lid state as open\n");
> > +               pr_info("Notify initial lid state to users space as open and kernel drivers with
> _LID return value\n");
> >         } else if (!strncmp(val, "close", sizeof("close") - 1)) {
> >                 lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
> > -               pr_info("Notify initial lid state as close\n");
> > +               pr_info("Notify initial lid state to user space as close and kernel drivers with
> _LID return value\n");
> >         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
> >                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> > -               pr_info("Notify initial lid state with _LID return value\n");
> > +               pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
> >         } else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
> >                 lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> >                 pr_info("Do not notify initial lid state\n");
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value

[Benjamin Tissoires]

On Fri, May 12, 2017 at 3:22 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
> Hi,
>
>> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
>> Tissoires
>> Subject: Re: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value
>>
>> On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
>> > Both nouveau and i915, the only 2 kernel space lid notification listeners,
>> > invoke acpi_lid_open() API to obtain _LID returning value instead of using
>> > the notified value.
>> >
>> > So this patch moves this logic from listeners to lid driver, always notify
>> > kernel space listeners using _LID returning value.
>> >
>> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
>> > ---
>> >  drivers/acpi/button.c | 31 ++++++++++++++++++++-----------
>> >  1 file changed, 20 insertions(+), 11 deletions(-)
>> >
>> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
>> > index b91ff86..7ff3a75 100644
>> > --- a/drivers/acpi/button.c
>> > +++ b/drivers/acpi/button.c
>> > @@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>> >  static unsigned long lid_report_interval __read_mostly = 500;
>> >  module_param(lid_report_interval, ulong, 0644);
>> >  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
>> > +static bool lid_fake_events __read_mostly = true;
>> > +module_param(lid_fake_events, bool, 0644);
>> > +MODULE_PARM_DESC(lid_fake_events, "Deliver fake events to kernel drivers");
>> >
>> >  /* --------------------------------------------------------------------------
>> >                                FS Interface (/proc)
>> > @@ -139,7 +142,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
>> >         return lid_state ? 1 : 0;
>> >  }
>> >
>> > -static void acpi_lid_notify_state(struct acpi_device *device, int state)
>> > +static void acpi_lid_notify_state(struct acpi_device *device,
>> > +                                 int state, bool bios_notify)
>> >  {
>> >         struct acpi_button *button = acpi_driver_data(device);
>> >         ktime_t next_report;
>> > @@ -219,7 +223,11 @@ static void acpi_lid_notify_state(struct acpi_device *device, int state)
>> >         if (state)
>> >                 pm_wakeup_event(&device->dev, 0);
>> >
>> > -       atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
>> > +       if (bios_notify)
>> > +               atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
>> > +       else if (lid_fake_events)
>> > +               atomic_notifier_call_chain(&acpi_lid_notifier,
>> > +                       acpi_lid_evaluate_state(device), device);
>>
>> I don't quite get the "lid_fake_event" parameter. If set, you are
>> forwarding the evaluated method, which should be correct, not faked...
>
> Fake means the event is generated by kernel.
> BIOS didn't generate the event.
> Maybe we could name it differently.
>
>>
>> Also, what if bios_notify is false and so is lid_fake_events? Is that
>> expected that no events are forwarded?
>
> When bios_notify=true:
> 1. the button driver evaluates _LID upon seeing a BIOS notification and
> 2. the lid event notifier just forwards _LID return value to the listeners.
> When bios_notify=false:
> 1. this is only happen when the platform reboots/resumes,
> 2. the button driver just fakes (sorry I used fake again) an event without seeing any BIOS notification, and
> 3. the lid event notifier sends the faked event to the listeners. Originally, What has been sent to the listeners:
> 3.1. sends "open" to the listeners when button.lid_init_state=open,
> 3.2. sends "close" to the listeners when button.lid_init_state=close,
> 3.3. sends _LID return value to the listeners when button.lid_init_state=method.
>
> So let's check the listener side (who invokes acpi_lid_notifier_register()).
> The only acpi_lid_notifier_register() invoker is drivers/gpu/drm/i915/intel_lvds.c.
>
> If you check its implementation (also you can see its code in PATCH 5/5).
> It cares no about what we send.
> Whatever we send "open/close/eval(_LID)" to it, it just invokes acpi_lid_open() API to obtain the _LID return value.

Right, so that's a wrong behavior since c1c7af6089207 "drm/i915: force
mode set at lid open time" at around the 2.6.31 kernel.

> While button driver's preference is remove acpi_lid_open() and let the listeners use the notified value instead.

That's one way of seeing. I would prefer having acpi_lid_open()
reporting the cached value, the same as the one we sent in the
notifier.
Or if you believe there might be races, this could be synced or
acpi_lid_open() can be removed, but the races seem to be minimal in
term of impact: if the LID is opened, on resume the driver decides to
restore the pipes and planes by itself.
A race would mean that the notification would only matter for the last
state, and that's no problem.

>
> If the listener do not use the notified value, there is a time slice between lid notification and the _LID evaluation.
> We should put some synchronization mechanism around around the 2 actions in button driver to make the result more trustworthy.
> So we trend to just send what the listener want to them and leave the possibility of implementing such usage model in button driver.
>
>>
>> Honestly, adding one more kernel parameter doesn't seem to solve
>> anything, it just adds more blur on a blurry situation.
>>
>> How about:
>> - you keep the "ignore", "method" and "open" (because they are kernel
>> API now) and don't add more
>> - you revert the "method" initial lid state, as requested by me and
>> others hitting the docking station "bug"
>
> Let's talk about this in different email.
>
>> - you just let user space deal with false lid switch values by
>> forwarding the bugs to libinput.
>>
>> IMO, we don't need such patch.
>
> This patch is developed to eliminate acpi_lid_open() in order to enforce the following usage model:
>
> All lid event notifier should use the notified value in their callback.

Yes, make sense. But you are deprecating the nouveau call in the other
patch, while all you could do is fix it in acpi.button without
bothering other developers. So no, I still believe this is not the
best way of solving the issue.

Cheers,
Benjamin

>
> Cheers,
> Lv
>
>>
>> Cheers,
>> Benjamin
>>
>> >  }
>> >
>> >  static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
>> > @@ -349,7 +357,8 @@ int acpi_lid_open(void)
>> >  }
>> >  EXPORT_SYMBOL(acpi_lid_open);
>> >
>> > -static int acpi_lid_update_state(struct acpi_device *device)
>> > +static int acpi_lid_update_state(struct acpi_device *device,
>> > +                                bool bios_notify)
>> >  {
>> >         int state;
>> >
>> > @@ -357,7 +366,7 @@ static int acpi_lid_update_state(struct acpi_device *device)
>> >         if (state < 0)
>> >                 return state;
>> >
>> > -       acpi_lid_notify_state(device, state);
>> > +       acpi_lid_notify_state(device, state, bios_notify);
>> >         return 0;
>> >  }
>> >
>> > @@ -365,13 +374,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>> >  {
>> >         switch (lid_init_state) {
>> >         case ACPI_BUTTON_LID_INIT_OPEN:
>> > -               (void)acpi_lid_notify_state(device, 1);
>> > +               (void)acpi_lid_notify_state(device, 1, false);
>> >                 break;
>> >         case ACPI_BUTTON_LID_INIT_CLOSE:
>> > -               (void)acpi_lid_notify_state(device, 0);
>> > +               (void)acpi_lid_notify_state(device, 0, false);
>> >                 break;
>> >         case ACPI_BUTTON_LID_INIT_METHOD:
>> > -               (void)acpi_lid_update_state(device);
>> > +               (void)acpi_lid_update_state(device, false);
>> >                 break;
>> >         case ACPI_BUTTON_LID_INIT_IGNORE:
>> >         default:
>> > @@ -391,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
>> >         case ACPI_BUTTON_NOTIFY_STATUS:
>> >                 input = button->input;
>> >                 if (button->type == ACPI_BUTTON_TYPE_LID) {
>> > -                       acpi_lid_update_state(device);
>> > +                       acpi_lid_update_state(device, true);
>> >                 } else {
>> >                         int keycode;
>> >
>> > @@ -555,13 +564,13 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
>> >
>> >         if (!strncmp(val, "open", sizeof("open") - 1)) {
>> >                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>> > -               pr_info("Notify initial lid state as open\n");
>> > +               pr_info("Notify initial lid state to users space as open and kernel drivers with
>> _LID return value\n");
>> >         } else if (!strncmp(val, "close", sizeof("close") - 1)) {
>> >                 lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
>> > -               pr_info("Notify initial lid state as close\n");
>> > +               pr_info("Notify initial lid state to user space as close and kernel drivers with
>> _LID return value\n");
>> >         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
>> >                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
>> > -               pr_info("Notify initial lid state with _LID return value\n");
>> > +               pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
>> >         } else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
>> >                 lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
>> >                 pr_info("Do not notify initial lid state\n");
>> > --
>> > 2.7.4
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> > the body of a message to majordomo@vger.kernel.org
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value

[Zheng, Lv]

Hi, Benjamin

> From: Benjamin Tissoires [mailto:benjamin.tissoires@gmail.com]
> Subject: Re: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value
> 
> On Fri, May 12, 2017 at 3:22 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
> > Hi,
> >
> >> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of
> Benjamin
> >> Tissoires
> >> Subject: Re: [PATCH v2 4/5] ACPI: button: Always notify kernel space using _LID returning value
> >>
> >> On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> >> > Both nouveau and i915, the only 2 kernel space lid notification listeners,
> >> > invoke acpi_lid_open() API to obtain _LID returning value instead of using
> >> > the notified value.
> >> >
> >> > So this patch moves this logic from listeners to lid driver, always notify
> >> > kernel space listeners using _LID returning value.
> >> >
> >> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> >> > ---
> >> >  drivers/acpi/button.c | 31 ++++++++++++++++++++-----------
> >> >  1 file changed, 20 insertions(+), 11 deletions(-)
> >> >
> >> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> >> > index b91ff86..7ff3a75 100644
> >> > --- a/drivers/acpi/button.c
> >> > +++ b/drivers/acpi/button.c
> >> > @@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> >> >  static unsigned long lid_report_interval __read_mostly = 500;
> >> >  module_param(lid_report_interval, ulong, 0644);
> >> >  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> >> > +static bool lid_fake_events __read_mostly = true;
> >> > +module_param(lid_fake_events, bool, 0644);
> >> > +MODULE_PARM_DESC(lid_fake_events, "Deliver fake events to kernel drivers");
> >> >
> >> >  /* --------------------------------------------------------------------------
> >> >                                FS Interface (/proc)
> >> > @@ -139,7 +142,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
> >> >         return lid_state ? 1 : 0;
> >> >  }
> >> >
> >> > -static void acpi_lid_notify_state(struct acpi_device *device, int state)
> >> > +static void acpi_lid_notify_state(struct acpi_device *device,
> >> > +                                 int state, bool bios_notify)
> >> >  {
> >> >         struct acpi_button *button = acpi_driver_data(device);
> >> >         ktime_t next_report;
> >> > @@ -219,7 +223,11 @@ static void acpi_lid_notify_state(struct acpi_device *device, int state)
> >> >         if (state)
> >> >                 pm_wakeup_event(&device->dev, 0);
> >> >
> >> > -       atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
> >> > +       if (bios_notify)
> >> > +               atomic_notifier_call_chain(&acpi_lid_notifier, state, device);
> >> > +       else if (lid_fake_events)
> >> > +               atomic_notifier_call_chain(&acpi_lid_notifier,
> >> > +                       acpi_lid_evaluate_state(device), device);
> >>
> >> I don't quite get the "lid_fake_event" parameter. If set, you are
> >> forwarding the evaluated method, which should be correct, not faked...
> >
> > Fake means the event is generated by kernel.
> > BIOS didn't generate the event.
> > Maybe we could name it differently.
> >
> >>
> >> Also, what if bios_notify is false and so is lid_fake_events? Is that
> >> expected that no events are forwarded?
> >
> > When bios_notify=true:
> > 1. the button driver evaluates _LID upon seeing a BIOS notification and
> > 2. the lid event notifier just forwards _LID return value to the listeners.
> > When bios_notify=false:
> > 1. this is only happen when the platform reboots/resumes,
> > 2. the button driver just fakes (sorry I used fake again) an event without seeing any BIOS
> notification, and
> > 3. the lid event notifier sends the faked event to the listeners. Originally, What has been sent to
> the listeners:
> > 3.1. sends "open" to the listeners when button.lid_init_state=open,
> > 3.2. sends "close" to the listeners when button.lid_init_state=close,
> > 3.3. sends _LID return value to the listeners when button.lid_init_state=method.
> >
> > So let's check the listener side (who invokes acpi_lid_notifier_register()).
> > The only acpi_lid_notifier_register() invoker is drivers/gpu/drm/i915/intel_lvds.c.
> >
> > If you check its implementation (also you can see its code in PATCH 5/5).
> > It cares no about what we send.
> > Whatever we send "open/close/eval(_LID)" to it, it just invokes acpi_lid_open() API to obtain the
> _LID return value.
> 
> Right, so that's a wrong behavior since c1c7af6089207 "drm/i915: force
> mode set at lid open time" at around the 2.6.31 kernel.
> 
> > While button driver's preference is remove acpi_lid_open() and let the listeners use the notified
> value instead.
> 
> That's one way of seeing. I would prefer having acpi_lid_open()
> reporting the cached value, the same as the one we sent in the
> notifier.
> Or if you believe there might be races, this could be synced or
> acpi_lid_open() can be removed, but the races seem to be minimal in
> term of impact: if the LID is opened, on resume the driver decides to
> restore the pipes and planes by itself.
> A race would mean that the notification would only matter for the last
> state, and that's no problem.

The purpose of PATCH 4-5 is not to fix anything.
They are no-op cleanups, purposing to make some implicit logic explicit.
Please don't try to mess the purpose up.

While what you want is a behavior change.
Our upstreaming rule is always to split a non-no-op change into a separate commit.
Because in the firmware support world and the cross-layered bugging area.
We don't know what's going to happen to the behavior change.
(Actually I know what's going to happen to what you want to change here - new regression report IMO)
And don't want to be false treated as the culprit to cause the regressions.

> 
> >
> > If the listener do not use the notified value, there is a time slice between lid notification and
> the _LID evaluation.
> > We should put some synchronization mechanism around around the 2 actions in button driver to make
> the result more trustworthy.
> > So we trend to just send what the listener want to them and leave the possibility of implementing
> such usage model in button driver.
> >
> >>
> >> Honestly, adding one more kernel parameter doesn't seem to solve
> >> anything, it just adds more blur on a blurry situation.
> >>
> >> How about:
> >> - you keep the "ignore", "method" and "open" (because they are kernel
> >> API now) and don't add more
> >> - you revert the "method" initial lid state, as requested by me and
> >> others hitting the docking station "bug"
> >
> > Let's talk about this in different email.
> >
> >> - you just let user space deal with false lid switch values by
> >> forwarding the bugs to libinput.
> >>
> >> IMO, we don't need such patch.
> >
> > This patch is developed to eliminate acpi_lid_open() in order to enforce the following usage model:
> >
> > All lid event notifier should use the notified value in their callback.
> 
> Yes, make sense.

So that we can do no-ops for i915.
How could we notify nouveau driver of this change?

> But you are deprecating the nouveau call in the other
> patch, while all you could do is fix it in acpi.button without
> bothering other developers.

I didn't.
Marking something __deprecated doesn't actually break its users.
They can still use it.

If nouveau driver relies on acpi_lid_open(), then it always uses _LID return value even in button.lid_init_state=open/close modes.
If I changed acpi_lid_open() to what you suggested, the function will return open/close after boot/resume in button.lid_init_state=open/close modes.
This is an actually a real behavior change, possibly will bother nouveau developers of regressions.

I can see that you just want me to cleanup nouveau driver along with i915.
I can try but I have no mean to test.
I don't have any nouveau graphics card in my hand.
That's also why I just mark it as "__deprecated".

On the contrary, if something has a design defect, or layered bugs, will say we shouldn't bother the other communities.
So you are just trying to make an argument to me from your point of view, not mine.

> So no, I still believe this is not the
> best way of solving the issue.

There is no issue for PATCH 4-5 to solve.
They are just no-op cleanups.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> >
> > Cheers,
> > Lv
> >
> >>
> >> Cheers,
> >> Benjamin
> >>
> >> >  }
> >> >
> >> >  static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
> >> > @@ -349,7 +357,8 @@ int acpi_lid_open(void)
> >> >  }
> >> >  EXPORT_SYMBOL(acpi_lid_open);
> >> >
> >> > -static int acpi_lid_update_state(struct acpi_device *device)
> >> > +static int acpi_lid_update_state(struct acpi_device *device,
> >> > +                                bool bios_notify)
> >> >  {
> >> >         int state;
> >> >
> >> > @@ -357,7 +366,7 @@ static int acpi_lid_update_state(struct acpi_device *device)
> >> >         if (state < 0)
> >> >                 return state;
> >> >
> >> > -       acpi_lid_notify_state(device, state);
> >> > +       acpi_lid_notify_state(device, state, bios_notify);
> >> >         return 0;
> >> >  }
> >> >
> >> > @@ -365,13 +374,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
> >> >  {
> >> >         switch (lid_init_state) {
> >> >         case ACPI_BUTTON_LID_INIT_OPEN:
> >> > -               (void)acpi_lid_notify_state(device, 1);
> >> > +               (void)acpi_lid_notify_state(device, 1, false);
> >> >                 break;
> >> >         case ACPI_BUTTON_LID_INIT_CLOSE:
> >> > -               (void)acpi_lid_notify_state(device, 0);
> >> > +               (void)acpi_lid_notify_state(device, 0, false);
> >> >                 break;
> >> >         case ACPI_BUTTON_LID_INIT_METHOD:
> >> > -               (void)acpi_lid_update_state(device);
> >> > +               (void)acpi_lid_update_state(device, false);
> >> >                 break;
> >> >         case ACPI_BUTTON_LID_INIT_IGNORE:
> >> >         default:
> >> > @@ -391,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
> >> >         case ACPI_BUTTON_NOTIFY_STATUS:
> >> >                 input = button->input;
> >> >                 if (button->type == ACPI_BUTTON_TYPE_LID) {
> >> > -                       acpi_lid_update_state(device);
> >> > +                       acpi_lid_update_state(device, true);
> >> >                 } else {
> >> >                         int keycode;
> >> >
> >> > @@ -555,13 +564,13 @@ static int param_set_lid_init_state(const char *val, struct kernel_param
> *kp)
> >> >
> >> >         if (!strncmp(val, "open", sizeof("open") - 1)) {
> >> >                 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> >> > -               pr_info("Notify initial lid state as open\n");
> >> > +               pr_info("Notify initial lid state to users space as open and kernel drivers with
> >> _LID return value\n");
> >> >         } else if (!strncmp(val, "close", sizeof("close") - 1)) {
> >> >                 lid_init_state = ACPI_BUTTON_LID_INIT_CLOSE;
> >> > -               pr_info("Notify initial lid state as close\n");
> >> > +               pr_info("Notify initial lid state to user space as close and kernel drivers with
> >> _LID return value\n");
> >> >         } else if (!strncmp(val, "method", sizeof("method") - 1)) {
> >> >                 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> >> > -               pr_info("Notify initial lid state with _LID return value\n");
> >> > +               pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
> >> >         } else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
> >> >                 lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> >> >                 pr_info("Do not notify initial lid state\n");
> >> > --
> >> > 2.7.4
> >> >
> >> > --
> >> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> >> > the body of a message to majordomo@vger.kernel.org
> >> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Lv Zheng]

Since notification side has been changed to always notify kernel listeners
using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
it should use a spec suggested control method lid device usage model:
register lid notification and use the notified value instead, which is the
only way to ensure the value is correct for "button.lid_init_state=ignore"
mode or other modes with "button.lid_fake_events=N" specified.

This patch fixes i915 driver to drop acpi_lid_open() user. It's not
possible to change nouveau_connector.c user using a simple way now. So this
patch only marks acpi_lid_open() as deprecated to accelerate this process
by indicating this change to the nouveau developers.

Cc: <intel-gfx@lists.freedesktop.org>
Cc: <nouveau@lists.freedesktop.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c             | 7 ++++++-
 drivers/gpu/drm/i915/intel_lvds.c | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 7ff3a75..50d7898 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
 }
 EXPORT_SYMBOL(acpi_lid_notifier_unregister);
 
-int acpi_lid_open(void)
+/*
+ * The intentional usage model is to register a lid notifier and use the
+ * notified value instead. Directly evaluating _LID without seeing a
+ * Notify(lid, 0x80) is not reliable.
+ */
+int __deprecated acpi_lid_open(void)
 {
 	if (!lid_device)
 		return -ENODEV;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9ca4dc4..8ca9080 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	/* Don't force modeset on machines where it causes a GPU lockup */
 	if (dmi_check_system(intel_no_modeset_on_lid))
 		goto exit;
-	if (!acpi_lid_open()) {
+	if (!val) {
 		/* do modeset on next lid open event */
 		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
 		goto exit;
-- 
2.7.4

Re: [Intel-gfx] [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Jani Nikula]

On Tue, 09 May 2017, Lv Zheng <lv.zheng@intel.com> wrote:
> Since notification side has been changed to always notify kernel listeners
> using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
> it should use a spec suggested control method lid device usage model:
> register lid notification and use the notified value instead, which is the
> only way to ensure the value is correct for "button.lid_init_state=ignore"
> mode or other modes with "button.lid_fake_events=N" specified.
>
> This patch fixes i915 driver to drop acpi_lid_open() user. It's not
> possible to change nouveau_connector.c user using a simple way now. So this
> patch only marks acpi_lid_open() as deprecated to accelerate this process
> by indicating this change to the nouveau developers.

Where's the rest of the series? Please send it all to intel-gfx so our
CI can crunch through it. And I could take a peek too.

This seems relevant:

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100923


BR,
Jani.

>
> Cc: <intel-gfx@lists.freedesktop.org>
> Cc: <nouveau@lists.freedesktop.org>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c             | 7 ++++++-
>  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
>  2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 7ff3a75..50d7898 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
>  }
>  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
>  
> -int acpi_lid_open(void)
> +/*
> + * The intentional usage model is to register a lid notifier and use the
> + * notified value instead. Directly evaluating _LID without seeing a
> + * Notify(lid, 0x80) is not reliable.
> + */
> +int __deprecated acpi_lid_open(void)
>  {
>  	if (!lid_device)
>  		return -ENODEV;
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 9ca4dc4..8ca9080 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
>  	/* Don't force modeset on machines where it causes a GPU lockup */
>  	if (dmi_check_system(intel_no_modeset_on_lid))
>  		goto exit;
> -	if (!acpi_lid_open()) {
> +	if (!val) {
>  		/* do modeset on next lid open event */
>  		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
>  		goto exit;

-- 
Jani Nikula, Intel Open Source Technology Center

Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Benjamin Tissoires]

On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> Since notification side has been changed to always notify kernel listeners
> using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
> it should use a spec suggested control method lid device usage model:
> register lid notification and use the notified value instead, which is the
> only way to ensure the value is correct for "button.lid_init_state=ignore"
> mode or other modes with "button.lid_fake_events=N" specified.
>
> This patch fixes i915 driver to drop acpi_lid_open() user. It's not
> possible to change nouveau_connector.c user using a simple way now. So this
> patch only marks acpi_lid_open() as deprecated to accelerate this process
> by indicating this change to the nouveau developers.

If  the only 2 users of acpi_lid_open() are intel and nouveau, and if
they should rely on the value stored in the input node, not the one
exported by the _LID method (which can be wrong on some platforms),
how about simply changing the implementation of acpi_lid_open() to
fetch the value from the input node directly?

Cheers,
Benjamin

>
> Cc: <intel-gfx@lists.freedesktop.org>
> Cc: <nouveau@lists.freedesktop.org>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c             | 7 ++++++-
>  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
>  2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 7ff3a75..50d7898 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
>  }
>  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
>
> -int acpi_lid_open(void)
> +/*
> + * The intentional usage model is to register a lid notifier and use the
> + * notified value instead. Directly evaluating _LID without seeing a
> + * Notify(lid, 0x80) is not reliable.
> + */
> +int __deprecated acpi_lid_open(void)
>  {
>         if (!lid_device)
>                 return -ENODEV;
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 9ca4dc4..8ca9080 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
>         /* Don't force modeset on machines where it causes a GPU lockup */
>         if (dmi_check_system(intel_no_modeset_on_lid))
>                 goto exit;
> -       if (!acpi_lid_open()) {
> +       if (!val) {
>                 /* do modeset on next lid open event */
>                 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
>                 goto exit;
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Zheng, Lv]

Hi,

> From: Benjamin Tissoires [mailto:benjamin.tissoires@gmail.com]
> Subject: Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
> 
> On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> > Since notification side has been changed to always notify kernel listeners
> > using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
> > it should use a spec suggested control method lid device usage model:
> > register lid notification and use the notified value instead, which is the
> > only way to ensure the value is correct for "button.lid_init_state=ignore"
> > mode or other modes with "button.lid_fake_events=N" specified.
> >
> > This patch fixes i915 driver to drop acpi_lid_open() user. It's not
> > possible to change nouveau_connector.c user using a simple way now. So this
> > patch only marks acpi_lid_open() as deprecated to accelerate this process
> > by indicating this change to the nouveau developers.
> 
> If  the only 2 users of acpi_lid_open() are intel and nouveau, and if
> they should rely on the value stored in the input node, not the one
> exported by the _LID method (which can be wrong on some platforms),
> how about simply changing the implementation of acpi_lid_open() to
> fetch the value from the input node directly?

See my reply of PATCH 4.
It seems they trust _LID return value more than what we send to them.

We can actually send faked "open/close" to them when button.lid_init_state=open/close is specified.

So these 2 patches [PATCH 4-5/5] are used to do a small cleanup for lid event notifier APIs.
I think they are not strictly related to the lid issues we are talking about.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> >
> > Cc: <intel-gfx@lists.freedesktop.org>
> > Cc: <nouveau@lists.freedesktop.org>
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> >  drivers/acpi/button.c             | 7 ++++++-
> >  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
> >  2 files changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> > index 7ff3a75..50d7898 100644
> > --- a/drivers/acpi/button.c
> > +++ b/drivers/acpi/button.c
> > @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
> >  }
> >  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
> >
> > -int acpi_lid_open(void)
> > +/*
> > + * The intentional usage model is to register a lid notifier and use the
> > + * notified value instead. Directly evaluating _LID without seeing a
> > + * Notify(lid, 0x80) is not reliable.
> > + */
> > +int __deprecated acpi_lid_open(void)
> >  {
> >         if (!lid_device)
> >                 return -ENODEV;
> > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> > index 9ca4dc4..8ca9080 100644
> > --- a/drivers/gpu/drm/i915/intel_lvds.c
> > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> > @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
> >         /* Don't force modeset on machines where it causes a GPU lockup */
> >         if (dmi_check_system(intel_no_modeset_on_lid))
> >                 goto exit;
> > -       if (!acpi_lid_open()) {
> > +       if (!val) {
> >                 /* do modeset on next lid open event */
> >                 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
> >                 goto exit;
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Zheng, Lv]

Hi,

If my previous reply is not persuasive enough.
Let me do that in a different way.

> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Zheng,
> Lv
> Subject: RE: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
> 
> Hi,
> 
> > From: Benjamin Tissoires [mailto:benjamin.tissoires@gmail.com]
> > Subject: Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
> >
> > On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> > > Since notification side has been changed to always notify kernel listeners
> > > using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
> > > it should use a spec suggested control method lid device usage model:
> > > register lid notification and use the notified value instead, which is the
> > > only way to ensure the value is correct for "button.lid_init_state=ignore"
> > > mode or other modes with "button.lid_fake_events=N" specified.
> > >
> > > This patch fixes i915 driver to drop acpi_lid_open() user. It's not
> > > possible to change nouveau_connector.c user using a simple way now. So this
> > > patch only marks acpi_lid_open() as deprecated to accelerate this process
> > > by indicating this change to the nouveau developers.
> >
> > If  the only 2 users of acpi_lid_open() are intel and nouveau, and if
> > they should rely on the value stored in the input node, not the one
> > exported by the _LID method (which can be wrong on some platforms),
> > how about simply changing the implementation of acpi_lid_open() to
> > fetch the value from the input node directly?

If acpi_lid_open() returns stored value in input node,
then it actually returns the value we notified to the input layer.
While i915 and nouveau explicitly do not trust that value and invoke acpi_lid_open().

For button.lid_init_state=method, PATCH 4/5 is useless as the values are same.

However in my reply of PATCH 2.
I explained the difference of method/close, for the same reason, we can also sense the difference of method/open.
The difference then can explain the usefulness of open/close modes.

Given open/close modes are all useful:
button.lid_init_state=open
1. button driver sends open to input layer after boot/resume
2. i915/nouveau uses _LID return value after boot/resume
If _LID return value after boot/resume is "close", they are different.

button.lid_init_state=close
1. button driver sends close to input layer after boot/resume
2. i915/nouveau uses _LID return value after boot/resume
If _LID return value after boot/resume is "open", they are different.

The only way to be consistent to old i915/nouveau behavior is:
button.lid_init_state=open/close
1. button driver sends open/close to input layer after boot/resume
2. button driver sends _LID return value to i915 after boot/resume (PATCH 4)
So that i915 can just use the notified value in this patch (PATCH 5).
For nouveau, no change has been made for now, and as a concequence, acpi_lid_open() is still kept but marked as deprecated.

> 
> See my reply of PATCH 4.
> It seems they trust _LID return value more than what we send to them.
> 
> We can actually send faked "open/close" to them when button.lid_init_state=open/close is specified.
> 
> So these 2 patches [PATCH 4-5/5] are used to do a small cleanup for lid event notifier APIs.
> I think they are not strictly related to the lid issues we are talking about.

See Documentation/acpi/acpi-lid.txt:
The _LID control method is described to return the "current" lid state.
However the word of "current" has ambiguity, some buggy AML tables return
the lid state upon the last lid notification instead of returning the lid
state upon the last _LID evaluation.

In order to have acpi lid event notifier API compliant to the above mentioned both "buggy" and "nonbuggy" implementation.
The ensured lid event model interface should be:
1. Lid event notifier listeners invokes acpi_lid_notifier_register().
2. And in the callback, uses _LID return value.
This is also the only possible way to combine "receiving lid notify" and "evaluate _LID" into 1 single atomic operation.

So I trend to remove acpi_lid_open() and enforce the new API.

As a conclusion, PATCH 4-5
1. makes a hidden logic explicit - the lid event listeners always use _LID return value. Less hidden logics should leave less chances of bugs.
2. is an implementation for our documented ACPI lid event model.
And the implementation is done in a regression safe way.

Thanks,
Lv

> 
> Cheers,
> Lv
> 
> >
> > Cheers,
> > Benjamin
> >
> > >
> > > Cc: <intel-gfx@lists.freedesktop.org>
> > > Cc: <nouveau@lists.freedesktop.org>
> > > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > > ---
> > >  drivers/acpi/button.c             | 7 ++++++-
> > >  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
> > >  2 files changed, 7 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> > > index 7ff3a75..50d7898 100644
> > > --- a/drivers/acpi/button.c
> > > +++ b/drivers/acpi/button.c
> > > @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
> > >  }
> > >  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
> > >
> > > -int acpi_lid_open(void)
> > > +/*
> > > + * The intentional usage model is to register a lid notifier and use the
> > > + * notified value instead. Directly evaluating _LID without seeing a
> > > + * Notify(lid, 0x80) is not reliable.
> > > + */
> > > +int __deprecated acpi_lid_open(void)
> > >  {
> > >         if (!lid_device)
> > >                 return -ENODEV;
> > > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> > > index 9ca4dc4..8ca9080 100644
> > > --- a/drivers/gpu/drm/i915/intel_lvds.c
> > > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> > > @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
> > >         /* Don't force modeset on machines where it causes a GPU lockup */
> > >         if (dmi_check_system(intel_no_modeset_on_lid))
> > >                 goto exit;
> > > -       if (!acpi_lid_open()) {
> > > +       if (!val) {
> > >                 /* do modeset on next lid open event */
> > >                 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
> > >                 goto exit;
> > > --
> > > 2.7.4
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> \x13��칻\x1c�&�~�&�\x18��+-��ݶ\x17��w��˛���m�b��Zr����^n�r���z�\x1a��h����&��\x1e�G���h�\x03(�階
> �ݢj"��\x1a�^[m�����z�ޖ���f���h���~�m�

Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Benjamin Tissoires]

Hi Lv,

I am trying to reduce the number of parallel discussion we have on the
same subject, but there is something here I can't let you have.

On Fri, May 12, 2017 at 8:08 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
> Hi,
>
> If my previous reply is not persuasive enough.
> Let me do that in a different way.
>
>> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Zheng,
>> Lv
>> Subject: RE: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
>>
>> Hi,
>>
>> > From: Benjamin Tissoires [mailto:benjamin.tissoires@gmail.com]
>> > Subject: Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
>> >
>> > On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
>> > > Since notification side has been changed to always notify kernel listeners
>> > > using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
>> > > it should use a spec suggested control method lid device usage model:
>> > > register lid notification and use the notified value instead, which is the
>> > > only way to ensure the value is correct for "button.lid_init_state=ignore"
>> > > mode or other modes with "button.lid_fake_events=N" specified.
>> > >
>> > > This patch fixes i915 driver to drop acpi_lid_open() user. It's not
>> > > possible to change nouveau_connector.c user using a simple way now. So this
>> > > patch only marks acpi_lid_open() as deprecated to accelerate this process
>> > > by indicating this change to the nouveau developers.
>> >
>> > If  the only 2 users of acpi_lid_open() are intel and nouveau, and if
>> > they should rely on the value stored in the input node, not the one
>> > exported by the _LID method (which can be wrong on some platforms),
>> > how about simply changing the implementation of acpi_lid_open() to
>> > fetch the value from the input node directly?
>
> If acpi_lid_open() returns stored value in input node,
> then it actually returns the value we notified to the input layer.
> While i915 and nouveau explicitly do not trust that value and invoke acpi_lid_open().
>
> For button.lid_init_state=method, PATCH 4/5 is useless as the values are same.
>
> However in my reply of PATCH 2.
> I explained the difference of method/close, for the same reason, we can also sense the difference of method/open.
> The difference then can explain the usefulness of open/close modes.
>
> Given open/close modes are all useful:
> button.lid_init_state=open
> 1. button driver sends open to input layer after boot/resume
> 2. i915/nouveau uses _LID return value after boot/resume
> If _LID return value after boot/resume is "close", they are different.
>
> button.lid_init_state=close
> 1. button driver sends close to input layer after boot/resume
> 2. i915/nouveau uses _LID return value after boot/resume
> If _LID return value after boot/resume is "open", they are different.
>
> The only way to be consistent to old i915/nouveau behavior is:
> button.lid_init_state=open/close

But these two modes are wrong in the absolute case:
- a laptop has no reasons for not being powered up with the lid
physically closed (wake on lan?) -> so open is an approximation
already made on good assumption that there is not a high chance of the
users powering/resuming the laptop with the lid closed
- in the "close" case, this setting works for docked laptops, but if
the laptop can be docked, it can also be undocked. And if you boot
with button.lid_init_state=close, undock your laptop, go into suspend,
resume -> the lid state is now "closed" while it should be opened.

So no, these are just workarounds. i915/nouveau expect the acpi/button
state to be reliable, or they should ignore it. But you can't fake
events when you are not absolutely sure of what is happening.

> 1. button driver sends open/close to input layer after boot/resume
> 2. button driver sends _LID return value to i915 after boot/resume (PATCH 4)
> So that i915 can just use the notified value in this patch (PATCH 5).
> For nouveau, no change has been made for now, and as a concequence, acpi_lid_open() is still kept but marked as deprecated.
>
>>
>> See my reply of PATCH 4.
>> It seems they trust _LID return value more than what we send to them.
>>
>> We can actually send faked "open/close" to them when button.lid_init_state=open/close is specified.
>>
>> So these 2 patches [PATCH 4-5/5] are used to do a small cleanup for lid event notifier APIs.
>> I think they are not strictly related to the lid issues we are talking about.
>
> See Documentation/acpi/acpi-lid.txt:
> The _LID control method is described to return the "current" lid state.
> However the word of "current" has ambiguity, some buggy AML tables return
> the lid state upon the last lid notification instead of returning the lid
> state upon the last _LID evaluation.
>
> In order to have acpi lid event notifier API compliant to the above mentioned both "buggy" and "nonbuggy" implementation.
> The ensured lid event model interface should be:
> 1. Lid event notifier listeners invokes acpi_lid_notifier_register().
> 2. And in the callback, uses _LID return value.
> This is also the only possible way to combine "receiving lid notify" and "evaluate _LID" into 1 single atomic operation.
>
> So I trend to remove acpi_lid_open() and enforce the new API.
>
> As a conclusion, PATCH 4-5
> 1. makes a hidden logic explicit - the lid event listeners always use _LID return value. Less hidden logics should leave less chances of bugs.
> 2. is an implementation for our documented ACPI lid event model.
> And the implementation is done in a regression safe way.

I understand all of that. But my point is still that on some
platforms, the lid acpi state is not reliable, and the code in
i915/nouveau is not made for those platforms. So the ideal solution is
to know which platforms are problematic and take the right decisions
having everything at hands. Just "fixing" the internal API won't help
teaching these drivers to not make the assumption that the _LID acpi
call is always correct.

So yes, nouveau/i915 might need to be fixed, but IMO, fixing
acpi/button to report correct (true, accurate, actual, or physical if
you prefer) is the best, future proof way (minus platform quirks).

Cheers,
Benjamin

>
> Thanks,
> Lv
>
>>
>> Cheers,
>> Lv
>>
>> >
>> > Cheers,
>> > Benjamin
>> >
>> > >
>> > > Cc: <intel-gfx@lists.freedesktop.org>
>> > > Cc: <nouveau@lists.freedesktop.org>
>> > > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
>> > > ---
>> > >  drivers/acpi/button.c             | 7 ++++++-
>> > >  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
>> > >  2 files changed, 7 insertions(+), 2 deletions(-)
>> > >
>> > > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
>> > > index 7ff3a75..50d7898 100644
>> > > --- a/drivers/acpi/button.c
>> > > +++ b/drivers/acpi/button.c
>> > > @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
>> > >  }
>> > >  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
>> > >
>> > > -int acpi_lid_open(void)
>> > > +/*
>> > > + * The intentional usage model is to register a lid notifier and use the
>> > > + * notified value instead. Directly evaluating _LID without seeing a
>> > > + * Notify(lid, 0x80) is not reliable.
>> > > + */
>> > > +int __deprecated acpi_lid_open(void)
>> > >  {
>> > >         if (!lid_device)
>> > >                 return -ENODEV;
>> > > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
>> > > index 9ca4dc4..8ca9080 100644
>> > > --- a/drivers/gpu/drm/i915/intel_lvds.c
>> > > +++ b/drivers/gpu/drm/i915/intel_lvds.c
>> > > @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
>> > >         /* Don't force modeset on machines where it causes a GPU lockup */
>> > >         if (dmi_check_system(intel_no_modeset_on_lid))
>> > >                 goto exit;
>> > > -       if (!acpi_lid_open()) {
>> > > +       if (!val) {
>> > >                 /* do modeset on next lid open event */
>> > >                 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
>> > >                 goto exit;
>> > > --
>> > > 2.7.4
>> > >
>> > > --
>> > > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> > > the body of a message to majordomo@vger.kernel.org
>> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>  ��칻 �&�~�&� ��+-��ݶ ��w��˛���m�b��Zr����^n�r���z� ��h����&�� �G���h� (�階
>> �ݢj"�� � m�����z�ޖ���f���h���~�m�

RE: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Zheng, Lv]

Hi, Benjamin

> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
> Tissoires
> Subject: Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
> 
> Hi Lv,
> 
> I am trying to reduce the number of parallel discussion we have on the
> same subject, but there is something here I can't let you have.

OK. So let's stop talking in PATCH 4-5.
They are actually cleanups from my point of view.

In fact, I don't see any big conflicts between us.

My point of view is:
There is a gap between (BIOS ensured/Windows expected) acpi control method lid device behavior and Linux user space expected acpi control method lid device behavior.
Button driver default behavior should be: button.lid_init_state=ignore
If user space programs have special needs, they can fix problems on their own, via the following mean:
 echo -n "open" > /sys/modules/button/parameters/lid_init_state
 echo -n "close" > /sys/modules/button/parameters/lid_init_state
Keeping open/close modes is because I don't think there is any bug in button driver.
So I need to prepare quirk modes from button driver's point of view and use them as a response to related bug reports reported in acpi community.
Your point of view is:
There is a gap between (BIOS ensured/Windows expected) acpi control method lid device behavior and Linux user space expected acpi control method lid device behavior.
Button driver default behavior should be (not 100% sure if this is your opinion): button.lid_init_state=method
If user space programs have special needs, they can fix them on their own, via the following mean:
 libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:*
  LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open
From this point of view, we actually don't need open/close modes.

It seems we just need to determine the following first:
1. Who should be responsible for solving bugs triggered by the conflict between bios and linux user space expectations:
   button driver? libinput? Some other user space programs? Users?
2. What should be the default button driver behavior?
   button.lid_init_state=ignore? button.lid_init_state=method?
3. If non button driver quirks are working, button driver quirk modes are useless.
   The question is: Should button.lid_init_state=open/close be kept?
4. From button driver's point of view, button.lid_init_state=ignore seems to be always correct, so we won't abandon it.
   If we can use libinput to manage platform quirks, then button.lid_init_state=method also looks useless.
   The question is: Should button.lid_init_state=method be kept?

I should also let you know my preference:
1. using button.lid_init_state=ignore and button.lid_init_state=method as default behavior is ok for me if answer to 1 is not button driver, otherwise using button.lid_init_state=method is not ok for me
2. deletion of button.lid_init_state=open/close is ok for me if answer to 1 is not button driver, otherwise deletion of button.lid_init_state=open/close is not ok for me
3. deletion of button.lid_init_state=method is always ok for me

See the base line from my side is very clear:
If acpi community need to handle such bug reports, button.lid_init_state=method cannot be the default behavior.
We are just using a different default behavior than "method" to drive things to reach the final root caused solution.

Could you let me know your preference so that we can figure out an agreement between us.
Though I don't know if end users will buy it (they may keep on filing regression reports in ACPI community).

Can this make the discussion simpler?

So before determining whether we should keep button.lid_init_state=open/close or not.
We obviously should stop talking here.
You can copy above questions to PATCH 1-2 discussion and reply in order to stop this.
We can revisit PATCH 4-5 when the basic questions are answered. :)

> 
> On Fri, May 12, 2017 at 8:08 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
> > Hi,
> >
> > If my previous reply is not persuasive enough.
> > Let me do that in a different way.
> >
> >> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Zheng,
> >> Lv
> >> Subject: RE: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
> >>
> >> Hi,
> >>
> >> > From: Benjamin Tissoires [mailto:benjamin.tissoires@gmail.com]
> >> > Subject: Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
> >> >
> >> > On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
> >> > > Since notification side has been changed to always notify kernel listeners
> >> > > using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
> >> > > it should use a spec suggested control method lid device usage model:
> >> > > register lid notification and use the notified value instead, which is the
> >> > > only way to ensure the value is correct for "button.lid_init_state=ignore"
> >> > > mode or other modes with "button.lid_fake_events=N" specified.
> >> > >
> >> > > This patch fixes i915 driver to drop acpi_lid_open() user. It's not
> >> > > possible to change nouveau_connector.c user using a simple way now. So this
> >> > > patch only marks acpi_lid_open() as deprecated to accelerate this process
> >> > > by indicating this change to the nouveau developers.
> >> >
> >> > If  the only 2 users of acpi_lid_open() are intel and nouveau, and if
> >> > they should rely on the value stored in the input node, not the one
> >> > exported by the _LID method (which can be wrong on some platforms),
> >> > how about simply changing the implementation of acpi_lid_open() to
> >> > fetch the value from the input node directly?
> >
> > If acpi_lid_open() returns stored value in input node,
> > then it actually returns the value we notified to the input layer.
> > While i915 and nouveau explicitly do not trust that value and invoke acpi_lid_open().
> >
> > For button.lid_init_state=method, PATCH 4/5 is useless as the values are same.
> >
> > However in my reply of PATCH 2.
> > I explained the difference of method/close, for the same reason, we can also sense the difference of
> method/open.
> > The difference then can explain the usefulness of open/close modes.
> >
> > Given open/close modes are all useful:
> > button.lid_init_state=open
> > 1. button driver sends open to input layer after boot/resume
> > 2. i915/nouveau uses _LID return value after boot/resume
> > If _LID return value after boot/resume is "close", they are different.
> >
> > button.lid_init_state=close
> > 1. button driver sends close to input layer after boot/resume
> > 2. i915/nouveau uses _LID return value after boot/resume
> > If _LID return value after boot/resume is "open", they are different.
> >
> > The only way to be consistent to old i915/nouveau behavior is:
> > button.lid_init_state=open/close
> 
> But these two modes are wrong in the absolute case:
> - a laptop has no reasons for not being powered up with the lid
> physically closed (wake on lan?) -> so open is an approximation
> already made on good assumption that there is not a high chance of the
> users powering/resuming the laptop with the lid closed
> - in the "close" case, this setting works for docked laptops, but if
> the laptop can be docked, it can also be undocked. And if you boot
> with button.lid_init_state=close, undock your laptop, go into suspend,
> resume -> the lid state is now "closed" while it should be opened.
> 
> So no, these are just workarounds. i915/nouveau expect the acpi/button
> state to be reliable, or they should ignore it. But you can't fake
> events when you are not absolutely sure of what is happening.
> 
> > 1. button driver sends open/close to input layer after boot/resume
> > 2. button driver sends _LID return value to i915 after boot/resume (PATCH 4)
> > So that i915 can just use the notified value in this patch (PATCH 5).
> > For nouveau, no change has been made for now, and as a concequence, acpi_lid_open() is still kept
> but marked as deprecated.
> >
> >>
> >> See my reply of PATCH 4.
> >> It seems they trust _LID return value more than what we send to them.
> >>
> >> We can actually send faked "open/close" to them when button.lid_init_state=open/close is specified.
> >>
> >> So these 2 patches [PATCH 4-5/5] are used to do a small cleanup for lid event notifier APIs.
> >> I think they are not strictly related to the lid issues we are talking about.
> >
> > See Documentation/acpi/acpi-lid.txt:
> > The _LID control method is described to return the "current" lid state.
> > However the word of "current" has ambiguity, some buggy AML tables return
> > the lid state upon the last lid notification instead of returning the lid
> > state upon the last _LID evaluation.
> >
> > In order to have acpi lid event notifier API compliant to the above mentioned both "buggy" and
> "nonbuggy" implementation.
> > The ensured lid event model interface should be:
> > 1. Lid event notifier listeners invokes acpi_lid_notifier_register().
> > 2. And in the callback, uses _LID return value.
> > This is also the only possible way to combine "receiving lid notify" and "evaluate _LID" into 1
> single atomic operation.
> >
> > So I trend to remove acpi_lid_open() and enforce the new API.
> >
> > As a conclusion, PATCH 4-5
> > 1. makes a hidden logic explicit - the lid event listeners always use _LID return value. Less hidden
> logics should leave less chances of bugs.
> > 2. is an implementation for our documented ACPI lid event model.
> > And the implementation is done in a regression safe way.
> 
> I understand all of that. But my point is still that on some
> platforms, the lid acpi state is not reliable, and the code in
> i915/nouveau is not made for those platforms. So the ideal solution is
> to know which platforms are problematic and take the right decisions
> having everything at hands. Just "fixing" the internal API won't help
> teaching these drivers to not make the assumption that the _LID acpi
> call is always correct.
> 
> So yes, nouveau/i915 might need to be fixed, but IMO, fixing
> acpi/button to report correct (true, accurate, actual, or physical if
> you prefer) is the best, future proof way (minus platform quirks).

This leads to endless discussion.
Let's make agreement on above questions first.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> >
> > Thanks,
> > Lv
> >
> >>
> >> Cheers,
> >> Lv
> >>
> >> >
> >> > Cheers,
> >> > Benjamin
> >> >
> >> > >
> >> > > Cc: <intel-gfx@lists.freedesktop.org>
> >> > > Cc: <nouveau@lists.freedesktop.org>
> >> > > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> >> > > ---
> >> > >  drivers/acpi/button.c             | 7 ++++++-
> >> > >  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
> >> > >  2 files changed, 7 insertions(+), 2 deletions(-)
> >> > >
> >> > > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> >> > > index 7ff3a75..50d7898 100644
> >> > > --- a/drivers/acpi/button.c
> >> > > +++ b/drivers/acpi/button.c
> >> > > @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
> >> > >  }
> >> > >  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
> >> > >
> >> > > -int acpi_lid_open(void)
> >> > > +/*
> >> > > + * The intentional usage model is to register a lid notifier and use the
> >> > > + * notified value instead. Directly evaluating _LID without seeing a
> >> > > + * Notify(lid, 0x80) is not reliable.
> >> > > + */
> >> > > +int __deprecated acpi_lid_open(void)
> >> > >  {
> >> > >         if (!lid_device)
> >> > >                 return -ENODEV;
> >> > > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> >> > > index 9ca4dc4..8ca9080 100644
> >> > > --- a/drivers/gpu/drm/i915/intel_lvds.c
> >> > > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> >> > > @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
> >> > >         /* Don't force modeset on machines where it causes a GPU lockup */
> >> > >         if (dmi_check_system(intel_no_modeset_on_lid))
> >> > >                 goto exit;
> >> > > -       if (!acpi_lid_open()) {
> >> > > +       if (!val) {
> >> > >                 /* do modeset on next lid open event */
> >> > >                 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
> >> > >                 goto exit;
> >> > > --
> >> > > 2.7.4
> >> > >
> >> > > --
> >> > > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> >> > > the body of a message to majordomo@vger.kernel.org
> >> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >>  ��칻 �&�~�&� ��+-��ݶ ��w��˛���m�b��Zr����^n�r���z� ��h����&�� �G���h� (�階
> >> �ݢj"�� � m�����z�ޖ���f���h���~�m�
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Benjamin Tissoires]

Hi Lv,

On Mon, May 15, 2017 at 5:55 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
> Hi, Benjamin
>
>> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
>> Tissoires
>> Subject: Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
>>
>> Hi Lv,
>>
>> I am trying to reduce the number of parallel discussion we have on the
>> same subject, but there is something here I can't let you have.
>
> OK. So let's stop talking in PATCH 4-5.
> They are actually cleanups from my point of view.
>
> In fact, I don't see any big conflicts between us.
>
> My point of view is:
> There is a gap between (BIOS ensured/Windows expected) acpi control method lid device behavior and Linux user space expected acpi control method lid device behavior.
> Button driver default behavior should be: button.lid_init_state=ignore
> If user space programs have special needs, they can fix problems on their own, via the following mean:
>  echo -n "open" > /sys/modules/button/parameters/lid_init_state
>  echo -n "close" > /sys/modules/button/parameters/lid_init_state
> Keeping open/close modes is because I don't think there is any bug in button driver.
> So I need to prepare quirk modes from button driver's point of view and use them as a response to related bug reports reported in acpi community.
> Your point of view is:
> There is a gap between (BIOS ensured/Windows expected) acpi control method lid device behavior and Linux user space expected acpi control method lid device behavior.
> Button driver default behavior should be (not 100% sure if this is your opinion): button.lid_init_state=method
> If user space programs have special needs, they can fix them on their own, via the following mean:
>  libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:*
>   LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open
> From this point of view, we actually don't need open/close modes.
>
> It seems we just need to determine the following first:
> 1. Who should be responsible for solving bugs triggered by the conflict between bios and linux user space expectations:
>    button driver? libinput? Some other user space programs? Users?
> 2. What should be the default button driver behavior?
>    button.lid_init_state=ignore? button.lid_init_state=method?
> 3. If non button driver quirks are working, button driver quirk modes are useless.
>    The question is: Should button.lid_init_state=open/close be kept?
> 4. From button driver's point of view, button.lid_init_state=ignore seems to be always correct, so we won't abandon it.
>    If we can use libinput to manage platform quirks, then button.lid_init_state=method also looks useless.
>    The question is: Should button.lid_init_state=method be kept?

I'll answer everything in the other thread, where there are slightly
more other points raised:
https://lkml.org/lkml/2017/5/15/10

>
> I should also let you know my preference:
> 1. using button.lid_init_state=ignore and button.lid_init_state=method as default behavior is ok for me if answer to 1 is not button driver, otherwise using button.lid_init_state=method is not ok for me
> 2. deletion of button.lid_init_state=open/close is ok for me if answer to 1 is not button driver, otherwise deletion of button.lid_init_state=open/close is not ok for me
> 3. deletion of button.lid_init_state=method is always ok for me
>
> See the base line from my side is very clear:
> If acpi community need to handle such bug reports, button.lid_init_state=method cannot be the default behavior.
> We are just using a different default behavior than "method" to drive things to reach the final root caused solution.
>
> Could you let me know your preference so that we can figure out an agreement between us.
> Though I don't know if end users will buy it (they may keep on filing regression reports in ACPI community).
>
> Can this make the discussion simpler?

I really hope so :)

Cheers,
Benjamin

>
> So before determining whether we should keep button.lid_init_state=open/close or not.
> We obviously should stop talking here.
> You can copy above questions to PATCH 1-2 discussion and reply in order to stop this.
> We can revisit PATCH 4-5 when the basic questions are answered. :)
>
>>
>> On Fri, May 12, 2017 at 8:08 AM, Zheng, Lv <lv.zheng@intel.com> wrote:
>> > Hi,
>> >
>> > If my previous reply is not persuasive enough.
>> > Let me do that in a different way.
>> >
>> >> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Zheng,
>> >> Lv
>> >> Subject: RE: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
>> >>
>> >> Hi,
>> >>
>> >> > From: Benjamin Tissoires [mailto:benjamin.tissoires@gmail.com]
>> >> > Subject: Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations
>> >> >
>> >> > On Tue, May 9, 2017 at 9:02 AM, Lv Zheng <lv.zheng@intel.com> wrote:
>> >> > > Since notification side has been changed to always notify kernel listeners
>> >> > > using _LID returning value. Now listeners needn't invoke acpi_lid_open(),
>> >> > > it should use a spec suggested control method lid device usage model:
>> >> > > register lid notification and use the notified value instead, which is the
>> >> > > only way to ensure the value is correct for "button.lid_init_state=ignore"
>> >> > > mode or other modes with "button.lid_fake_events=N" specified.
>> >> > >
>> >> > > This patch fixes i915 driver to drop acpi_lid_open() user. It's not
>> >> > > possible to change nouveau_connector.c user using a simple way now. So this
>> >> > > patch only marks acpi_lid_open() as deprecated to accelerate this process
>> >> > > by indicating this change to the nouveau developers.
>> >> >
>> >> > If  the only 2 users of acpi_lid_open() are intel and nouveau, and if
>> >> > they should rely on the value stored in the input node, not the one
>> >> > exported by the _LID method (which can be wrong on some platforms),
>> >> > how about simply changing the implementation of acpi_lid_open() to
>> >> > fetch the value from the input node directly?
>> >
>> > If acpi_lid_open() returns stored value in input node,
>> > then it actually returns the value we notified to the input layer.
>> > While i915 and nouveau explicitly do not trust that value and invoke acpi_lid_open().
>> >
>> > For button.lid_init_state=method, PATCH 4/5 is useless as the values are same.
>> >
>> > However in my reply of PATCH 2.
>> > I explained the difference of method/close, for the same reason, we can also sense the difference of
>> method/open.
>> > The difference then can explain the usefulness of open/close modes.
>> >
>> > Given open/close modes are all useful:
>> > button.lid_init_state=open
>> > 1. button driver sends open to input layer after boot/resume
>> > 2. i915/nouveau uses _LID return value after boot/resume
>> > If _LID return value after boot/resume is "close", they are different.
>> >
>> > button.lid_init_state=close
>> > 1. button driver sends close to input layer after boot/resume
>> > 2. i915/nouveau uses _LID return value after boot/resume
>> > If _LID return value after boot/resume is "open", they are different.
>> >
>> > The only way to be consistent to old i915/nouveau behavior is:
>> > button.lid_init_state=open/close
>>
>> But these two modes are wrong in the absolute case:
>> - a laptop has no reasons for not being powered up with the lid
>> physically closed (wake on lan?) -> so open is an approximation
>> already made on good assumption that there is not a high chance of the
>> users powering/resuming the laptop with the lid closed
>> - in the "close" case, this setting works for docked laptops, but if
>> the laptop can be docked, it can also be undocked. And if you boot
>> with button.lid_init_state=close, undock your laptop, go into suspend,
>> resume -> the lid state is now "closed" while it should be opened.
>>
>> So no, these are just workarounds. i915/nouveau expect the acpi/button
>> state to be reliable, or they should ignore it. But you can't fake
>> events when you are not absolutely sure of what is happening.
>>
>> > 1. button driver sends open/close to input layer after boot/resume
>> > 2. button driver sends _LID return value to i915 after boot/resume (PATCH 4)
>> > So that i915 can just use the notified value in this patch (PATCH 5).
>> > For nouveau, no change has been made for now, and as a concequence, acpi_lid_open() is still kept
>> but marked as deprecated.
>> >
>> >>
>> >> See my reply of PATCH 4.
>> >> It seems they trust _LID return value more than what we send to them.
>> >>
>> >> We can actually send faked "open/close" to them when button.lid_init_state=open/close is specified.
>> >>
>> >> So these 2 patches [PATCH 4-5/5] are used to do a small cleanup for lid event notifier APIs.
>> >> I think they are not strictly related to the lid issues we are talking about.
>> >
>> > See Documentation/acpi/acpi-lid.txt:
>> > The _LID control method is described to return the "current" lid state.
>> > However the word of "current" has ambiguity, some buggy AML tables return
>> > the lid state upon the last lid notification instead of returning the lid
>> > state upon the last _LID evaluation.
>> >
>> > In order to have acpi lid event notifier API compliant to the above mentioned both "buggy" and
>> "nonbuggy" implementation.
>> > The ensured lid event model interface should be:
>> > 1. Lid event notifier listeners invokes acpi_lid_notifier_register().
>> > 2. And in the callback, uses _LID return value.
>> > This is also the only possible way to combine "receiving lid notify" and "evaluate _LID" into 1
>> single atomic operation.
>> >
>> > So I trend to remove acpi_lid_open() and enforce the new API.
>> >
>> > As a conclusion, PATCH 4-5
>> > 1. makes a hidden logic explicit - the lid event listeners always use _LID return value. Less hidden
>> logics should leave less chances of bugs.
>> > 2. is an implementation for our documented ACPI lid event model.
>> > And the implementation is done in a regression safe way.
>>
>> I understand all of that. But my point is still that on some
>> platforms, the lid acpi state is not reliable, and the code in
>> i915/nouveau is not made for those platforms. So the ideal solution is
>> to know which platforms are problematic and take the right decisions
>> having everything at hands. Just "fixing" the internal API won't help
>> teaching these drivers to not make the assumption that the _LID acpi
>> call is always correct.
>>
>> So yes, nouveau/i915 might need to be fixed, but IMO, fixing
>> acpi/button to report correct (true, accurate, actual, or physical if
>> you prefer) is the best, future proof way (minus platform quirks).
>
> This leads to endless discussion.
> Let's make agreement on above questions first.
>
> Cheers,
> Lv
>
>>
>> Cheers,
>> Benjamin
>>
>> >
>> > Thanks,
>> > Lv
>> >
>> >>
>> >> Cheers,
>> >> Lv
>> >>
>> >> >
>> >> > Cheers,
>> >> > Benjamin
>> >> >
>> >> > >
>> >> > > Cc: <intel-gfx@lists.freedesktop.org>
>> >> > > Cc: <nouveau@lists.freedesktop.org>
>> >> > > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
>> >> > > ---
>> >> > >  drivers/acpi/button.c             | 7 ++++++-
>> >> > >  drivers/gpu/drm/i915/intel_lvds.c | 2 +-
>> >> > >  2 files changed, 7 insertions(+), 2 deletions(-)
>> >> > >
>> >> > > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
>> >> > > index 7ff3a75..50d7898 100644
>> >> > > --- a/drivers/acpi/button.c
>> >> > > +++ b/drivers/acpi/button.c
>> >> > > @@ -348,7 +348,12 @@ int acpi_lid_notifier_unregister(struct notifier_block *nb)
>> >> > >  }
>> >> > >  EXPORT_SYMBOL(acpi_lid_notifier_unregister);
>> >> > >
>> >> > > -int acpi_lid_open(void)
>> >> > > +/*
>> >> > > + * The intentional usage model is to register a lid notifier and use the
>> >> > > + * notified value instead. Directly evaluating _LID without seeing a
>> >> > > + * Notify(lid, 0x80) is not reliable.
>> >> > > + */
>> >> > > +int __deprecated acpi_lid_open(void)
>> >> > >  {
>> >> > >         if (!lid_device)
>> >> > >                 return -ENODEV;
>> >> > > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
>> >> > > index 9ca4dc4..8ca9080 100644
>> >> > > --- a/drivers/gpu/drm/i915/intel_lvds.c
>> >> > > +++ b/drivers/gpu/drm/i915/intel_lvds.c
>> >> > > @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
>> >> > >         /* Don't force modeset on machines where it causes a GPU lockup */
>> >> > >         if (dmi_check_system(intel_no_modeset_on_lid))
>> >> > >                 goto exit;
>> >> > > -       if (!acpi_lid_open()) {
>> >> > > +       if (!val) {
>> >> > >                 /* do modeset on next lid open event */
>> >> > >                 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
>> >> > >                 goto exit;
>> >> > > --
>> >> > > 2.7.4
>> >> > >
>> >> > > --
>> >> > > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> >> > > the body of a message to majordomo@vger.kernel.org
>> >> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> >>  ��칻 �&�~�&� ��+-��ݶ ��w��˛���m�b��Zr����^n�r���z� ��h����&�� �G���h� (�階
>> >> �ݢj"�� � m�����z�ޖ���f���h���~�m�
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Jani Nikula]

On Mon, 15 May 2017, Benjamin Tissoires <benjamin.tissoires@gmail.com> wrote:
> I'll answer everything in the other thread, where there are slightly
> more other points raised: https://lkml.org/lkml/2017/5/15/10

If you are discussing changes impacting i915, please keep intel-gfx list
in the loop.

Thanks,
Jani.


-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Benjamin Tissoires]

On Mon, May 15, 2017 at 10:42 AM, Jani Nikula
<jani.nikula@linux.intel.com> wrote:
> On Mon, 15 May 2017, Benjamin Tissoires <benjamin.tissoires@gmail.com> wrote:
>> I'll answer everything in the other thread, where there are slightly
>> more other points raised: https://lkml.org/lkml/2017/5/15/10
>
> If you are discussing changes impacting i915, please keep intel-gfx list
> in the loop.
>

I can add intel-gfx to the other thread if you want, but this will IMO
just add more noise to your list.
The question is whether or not the kernel should provide a fake state
for the _LID acpi call, and until we reach an agreement on how to
handle things, there is no point changing the currently working code
in i915.

It is true that there is an issue in i915 regarding the fact that
intel_lid_notify() doesn't use the provided value but calls
acpi_lid_open(), but this is something that can be solved in
https://bugs.freedesktop.org/show_bug.cgi?id=100923, when the
situation clarifies.

Cheers,
Benjamin

Re: [Intel-gfx] [PATCH v2 5/5] ACPI: button: Obselete acpi_lid_open() invocations

[Jani Nikula]

On Mon, 15 May 2017, Benjamin Tissoires <benjamin.tissoires@gmail.com> wrote:
> On Mon, May 15, 2017 at 10:42 AM, Jani Nikula
> <jani.nikula@linux.intel.com> wrote:
>> On Mon, 15 May 2017, Benjamin Tissoires <benjamin.tissoires@gmail.com> wrote:
>>> I'll answer everything in the other thread, where there are slightly
>>> more other points raised: https://lkml.org/lkml/2017/5/15/10
>>
>> If you are discussing changes impacting i915, please keep intel-gfx list
>> in the loop.
>>
>
> I can add intel-gfx to the other thread if you want, but this will IMO
> just add more noise to your list.
> The question is whether or not the kernel should provide a fake state
> for the _LID acpi call, and until we reach an agreement on how to
> handle things, there is no point changing the currently working code
> in i915.

Fair enough.

> It is true that there is an issue in i915 regarding the fact that
> intel_lid_notify() doesn't use the provided value but calls
> acpi_lid_open(), but this is something that can be solved in
> https://bugs.freedesktop.org/show_bug.cgi?id=100923, when the
> situation clarifies.

The snarky reply here might be that we're just following the
documentation of acpi_lid_notifier_register(), acpi_lid_open(), and
friends. ;)

BR,
Jani.


-- 
Jani Nikula, Intel Open Source Technology Center

[RFC PATCH v3 1/5] ACPI: button: Add indication of BIOS notification and faked events

[Lv Zheng]

This patch adds a parameter to acpi_lid_notify_state() so that it can act
differently against BIOS notification and kernel faked events.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 6d5a8c1..874ba60 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -138,7 +138,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device, int state)
+static int acpi_lid_notify_state(struct acpi_device *device,
+				 int state, bool bios_notify)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
@@ -360,7 +361,8 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device)
+static int acpi_lid_update_state(struct acpi_device *device,
+				 bool bios_notify)
 {
 	int state;
 
@@ -368,17 +370,17 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	if (state < 0)
 		return state;
 
-	return acpi_lid_notify_state(device, state);
+	return acpi_lid_notify_state(device, state, bios_notify);
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1);
+		(void)acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device);
+		(void)acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -398,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
-			acpi_lid_update_state(device);
+			acpi_lid_update_state(device, true);
 		} else {
 			int keycode;
 
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v3 1/5] ACPI: button: Add indication of BIOS notification and faked events

[Lv Zheng]

This patch adds a parameter to acpi_lid_notify_state() so that it can act
differently against BIOS notification and kernel faked events.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 6d5a8c1..874ba60 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -138,7 +138,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device, int state)
+static int acpi_lid_notify_state(struct acpi_device *device,
+				 int state, bool bios_notify)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
@@ -360,7 +361,8 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device)
+static int acpi_lid_update_state(struct acpi_device *device,
+				 bool bios_notify)
 {
 	int state;
 
@@ -368,17 +370,17 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	if (state < 0)
 		return state;
 
-	return acpi_lid_notify_state(device, state);
+	return acpi_lid_notify_state(device, state, bios_notify);
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1);
+		(void)acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device);
+		(void)acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -398,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
-			acpi_lid_update_state(device);
+			acpi_lid_update_state(device, true);
 		} else {
 			int keycode;
 
-- 
2.7.4

Re: [RFC PATCH v3 1/5] ACPI: button: Add indication of BIOS notification and faked events

[Benjamin Tissoires]

Hi Lv,

On May 27 2017 or thereabouts, Lv Zheng wrote:
> This patch adds a parameter to acpi_lid_notify_state() so that it can act
> differently against BIOS notification and kernel faked events.
> 
> Cc: <systemd-devel@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---

Answering to this one for the entire series:
last week was a mix of public holidays and PTO from me. I was only
able to review this series today, so sorry for the delay.

I still have a feeling this driver is far too engineered for a simple
input node. There are internal states, defers, mangle of events and too
many kernel parameters.

I still need to get my head around it, but the more I think of it, the
more I think the solution provided by Lennart in
https://github.com/systemd/systemd/issues/2807 is the simplest one:
when we are not sure about the state of the LID switch because _LID
might be wrong, we shouldn't export a LID input node.
Which means that all broken cases would be fixed by just a quirk
"unreliable lid switch".

Give me a day or two to get this in a better shape.

Cheers,
Benjamin

Re: [RFC PATCH v3 1/5] ACPI: button: Add indication of BIOS notification and faked events

[Zheng, Lv]

Hi,

> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
> Tissoires
> Subject: Re: [RFC PATCH v3 1/5] ACPI: button: Add indication of BIOS notification and faked events
> 
> Hi Lv,
> 
> On May 27 2017 or thereabouts, Lv Zheng wrote:
> > This patch adds a parameter to acpi_lid_notify_state() so that it can act
> > differently against BIOS notification and kernel faked events.
> >
> > Cc: <systemd-devel@lists.freedesktop.org>
> > Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> > Cc: Peter Hutterer <peter.hutterer@who-t.net>
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> 
> Answering to this one for the entire series:
> last week was a mix of public holidays and PTO from me. I was only
> able to review this series today, so sorry for the delay.

Here we were having "the Dragon Boat Festival".
But we really won't have chances of seeing see dragon boats in major cities.

> I still have a feeling this driver is far too engineered for a simple
> input node. There are internal states, defers, mangle of events and too
> many kernel parameters.

That's the firmware world and windows compliance world. :)

> I still need to get my head around it, but the more I think of it, the
> more I think the solution provided by Lennart in
> https://github.com/systemd/systemd/issues/2807 is the simplest one:
> when we are not sure about the state of the LID switch because _LID
> might be wrong, we shouldn't export a LID input node.
> Which means that all broken cases would be fixed by just a quirk
> "unreliable lid switch".

I checked the post and had no idea about what was going on.
However, my test shows systemd 233 works fine with button.lid_init_state=ignore.
I don't know what has been improved.

But a noticeable thing on old systemd 229 is:
Even with button.lid_init_state=open, systemd still behaves strangely.
It looks systemd 229 really has a problem with its timeout logic.
And in systemd 233, the timeout mechanism seems to work better.

Anyway, the problem disappears when there are only user space changes.

> Give me a day or two to get this in a better shape.

Sure.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

RE: [RFC PATCH v3 1/5] ACPI: button: Add indication of BIOS notification and faked events

[Zheng, Lv]

Hi,

> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Benjamin
> Tissoires
> Subject: Re: [RFC PATCH v3 1/5] ACPI: button: Add indication of BIOS notification and faked events
> 
> Hi Lv,
> 
> On May 27 2017 or thereabouts, Lv Zheng wrote:
> > This patch adds a parameter to acpi_lid_notify_state() so that it can act
> > differently against BIOS notification and kernel faked events.
> >
> > Cc: <systemd-devel@lists.freedesktop.org>
> > Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> > Cc: Peter Hutterer <peter.hutterer@who-t.net>
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> 
> Answering to this one for the entire series:
> last week was a mix of public holidays and PTO from me. I was only
> able to review this series today, so sorry for the delay.

Here we were having "the Dragon Boat Festival".
But we really won't have chances of seeing see dragon boats in major cities.

> I still have a feeling this driver is far too engineered for a simple
> input node. There are internal states, defers, mangle of events and too
> many kernel parameters.

That's the firmware world and windows compliance world. :)

> I still need to get my head around it, but the more I think of it, the
> more I think the solution provided by Lennart in
> https://github.com/systemd/systemd/issues/2807 is the simplest one:
> when we are not sure about the state of the LID switch because _LID
> might be wrong, we shouldn't export a LID input node.
> Which means that all broken cases would be fixed by just a quirk
> "unreliable lid switch".

I checked the post and had no idea about what was going on.
However, my test shows systemd 233 works fine with button.lid_init_state=ignore.
I don't know what has been improved.

But a noticeable thing on old systemd 229 is:
Even with button.lid_init_state=open, systemd still behaves strangely.
It looks systemd 229 really has a problem with its timeout logic.
And in systemd 233, the timeout mechanism seems to work better.

Anyway, the problem disappears when there are only user space changes.

> Give me a day or two to get this in a better shape.

Sure.

Cheers,
Lv

> 
> Cheers,
> Benjamin
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC PATCH v3 2/5] ACPI: button: Extends complement switch event support for all modes

[Lv Zheng]

Surface Pro 3 is a typical platform where suspend/resume loop problem
can be seen.

The problem is due to a systemd 229 bug:
1. "ignore": always can trigger endless suspend/resume loop
2. "open": sometimes suspend/resume loop can be stopped
3. "method": always can trigger endless susped/resume loop
The buggy systemd unexpectedly waits for an explicit "open" event after
boot/resume or it will suspends. However even when kernel can send a
faked "open" to it, its state machine is still wrong, systemd may not
respond "close" events arrived after "open" or may suddenly suspend
without seeing any instant events.

Recent systemd 233 has fixed this issue:
1. "ignore": everything works fine;
2. "open": no suspend/resume cycle, but sometimes cannot suspend the
           platform again after the first resume;
3. "method": no suspend/resume cycle, but always cannot suspend the
             platform again after the first resume.
The conclusion is: for suspend/resume cycle issue, "ignore" mode fixes
everything, but current "method" mode is still buggy.
Differences are because button driver only implements complement switch
events for "ignore" mode. Without complement switch events, firmware
triggered "close" cannot be delivered to userspace (confirmed by
evemu-record).

The root cause of the lid state issues is the variation of the platform
firmware implementations:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.

Let's check the docking external display issues (see links below):
1. For case 1, both "method"/"ignore" modes can work correctly;
2. For case 2/4/5, both "method"/"ignore" modes cannot work correctly;
3. For case 3, "method" can work correctly while "ignore" mode cannot.
The conclusion is: for docking external display issue, though the issue
still needs graphics layer (graphics drivers or desktop managers) to be
improved to ensure no breakages for case 2/4/5 platforms, there is a case
where "method" mode plays better.

Thus ACPI subsystem has been pushed to revert back to "method" mode due to
regression rule and case 3 (platforms reported on the links should all be
case 3 platforms), and libinput developers have volunteered to help to
provide workarounds when graphics layer is not fixed or systemd is not
updated.

Thus this patch extends the complement switch event support to other modes
using new indication: generating complement switch event for BIOS notified
"close". So that when button driver is reverted back to "method" mode, it
won't act worse than "ignore" mode on fixed systemd.

Tested with systemd 233, all modes worked fine (no suspend/resume loop and
can suspend any times) after applying this patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
      https://bugzilla.redhat.com/show_bug.cgi?id=1430259
Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 116 +++++++++++++++++++++++++-------------------------
 1 file changed, 57 insertions(+), 59 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 874ba60..a72f5bf 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -108,6 +108,7 @@ struct acpi_button {
 	unsigned long pushed;
 	int last_state;
 	ktime_t last_time;
+	bool last_is_bios;
 	bool suspended;
 };
 
@@ -144,78 +145,71 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
 	ktime_t next_report;
-	bool do_update;
 
 	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
+	 * Ignore frequently replayed switch events.
+	 *
+	 * AML tables can put Notify(LID, xxx) in a notification method,
+	 * and handling the hardware events by executing the entry methods
+	 * (ex., _Qxx) may cause the notification method to be invoked
+	 * several times.
+	 * This check doesn't apply to the faked events because if a BIOS
+	 * notification comes after a faked event, it must pass this check
+	 * in order to be reliablely delivered to user space.
 	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
 	next_report = ktime_add(button->last_time,
 				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
+	if (button->last_is_bios && button->last_state == !!state &&
+	    !ktime_after(ktime_get(), next_report))
+		return 0;
+
+	/*
+	 * Send the unreliable complement switch event:
+	 *
+	 * On most platforms, the lid device is reliable. However there are
+	 * exceptions:
+	 * 1. Platforms returning initial lid state as "close" by default
+	 *    after booting/resuming:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
+	 * 2. Platforms never reporting "open" events:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
+	 * On these buggy platforms, the usage model of the ACPI lid device
+	 * actually is:
+	 * 1. The initial returning value of _LID may not be reliable.
+	 * 2. The open event may not be reliable.
+	 * 3. The close event is reliable.
+	 *
+	 * But SW_LID is typed as input switch event, the input layer
+	 * checks if the event is redundant. Hence if the state is not
+	 * switched, the userspace cannot see this platform triggered
+	 * reliable event. By inserting a complement switch event, it then
+	 * is guaranteed that the platform triggered reliable one can
+	 * always be seen by the userspace.
+	 */
+	if (button->last_state == !!state && bios_notify) {
 		/* Complain the buggy firmware */
 		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
 		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
+		 * Do not generate complement switch event for "open"
+		 * events - faking "close" events can trigger unexpected
+		 * behaviors.
+		 * Thus only generate complement switch event for BIOS
+		 * notified "close".
 		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
+		if (!state) {
+			input_report_switch(button->input, SW_LID, state);
+			input_sync(button->input);
 		}
 	}
+
 	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
+	button->last_state = !!state;
+	button->last_time = ktime_get();
+	button->last_is_bios = bios_notify;
 
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
@@ -444,6 +438,8 @@ static int acpi_button_resume(struct device *dev)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	button->suspended = false;
+	/* ignore replay frequency check between suspend/resume */
+	button->last_is_bios = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
 		acpi_lid_initialize_state(device);
 	return 0;
@@ -492,6 +488,8 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		/* ignore replay frequency check after boot */
+		button->last_is_bios = false;
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v3 2/5] ACPI: button: Extends complement switch event support for all modes

[Lv Zheng]

Surface Pro 3 is a typical platform where suspend/resume loop problem
can be seen.

The problem is due to a systemd 229 bug:
1. "ignore": always can trigger endless suspend/resume loop
2. "open": sometimes suspend/resume loop can be stopped
3. "method": always can trigger endless susped/resume loop
The buggy systemd unexpectedly waits for an explicit "open" event after
boot/resume or it will suspends. However even when kernel can send a
faked "open" to it, its state machine is still wrong, systemd may not
respond "close" events arrived after "open" or may suddenly suspend
without seeing any instant events.

Recent systemd 233 has fixed this issue:
1. "ignore": everything works fine;
2. "open": no suspend/resume cycle, but sometimes cannot suspend the
           platform again after the first resume;
3. "method": no suspend/resume cycle, but always cannot suspend the
             platform again after the first resume.
The conclusion is: for suspend/resume cycle issue, "ignore" mode fixes
everything, but current "method" mode is still buggy.
Differences are because button driver only implements complement switch
events for "ignore" mode. Without complement switch events, firmware
triggered "close" cannot be delivered to userspace (confirmed by
evemu-record).

The root cause of the lid state issues is the variation of the platform
firmware implementations:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.

Let's check the docking external display issues (see links below):
1. For case 1, both "method"/"ignore" modes can work correctly;
2. For case 2/4/5, both "method"/"ignore" modes cannot work correctly;
3. For case 3, "method" can work correctly while "ignore" mode cannot.
The conclusion is: for docking external display issue, though the issue
still needs graphics layer (graphics drivers or desktop managers) to be
improved to ensure no breakages for case 2/4/5 platforms, there is a case
where "method" mode plays better.

Thus ACPI subsystem has been pushed to revert back to "method" mode due to
regression rule and case 3 (platforms reported on the links should all be
case 3 platforms), and libinput developers have volunteered to help to
provide workarounds when graphics layer is not fixed or systemd is not
updated.

Thus this patch extends the complement switch event support to other modes
using new indication: generating complement switch event for BIOS notified
"close". So that when button driver is reverted back to "method" mode, it
won't act worse than "ignore" mode on fixed systemd.

Tested with systemd 233, all modes worked fine (no suspend/resume loop and
can suspend any times) after applying this patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
      https://bugzilla.redhat.com/show_bug.cgi?id=1430259
Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 116 +++++++++++++++++++++++++-------------------------
 1 file changed, 57 insertions(+), 59 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 874ba60..a72f5bf 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -108,6 +108,7 @@ struct acpi_button {
 	unsigned long pushed;
 	int last_state;
 	ktime_t last_time;
+	bool last_is_bios;
 	bool suspended;
 };
 
@@ -144,78 +145,71 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
 	ktime_t next_report;
-	bool do_update;
 
 	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
+	 * Ignore frequently replayed switch events.
+	 *
+	 * AML tables can put Notify(LID, xxx) in a notification method,
+	 * and handling the hardware events by executing the entry methods
+	 * (ex., _Qxx) may cause the notification method to be invoked
+	 * several times.
+	 * This check doesn't apply to the faked events because if a BIOS
+	 * notification comes after a faked event, it must pass this check
+	 * in order to be reliablely delivered to user space.
 	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
 	next_report = ktime_add(button->last_time,
 				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
+	if (button->last_is_bios && button->last_state == !!state &&
+	    !ktime_after(ktime_get(), next_report))
+		return 0;
+
+	/*
+	 * Send the unreliable complement switch event:
+	 *
+	 * On most platforms, the lid device is reliable. However there are
+	 * exceptions:
+	 * 1. Platforms returning initial lid state as "close" by default
+	 *    after booting/resuming:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
+	 * 2. Platforms never reporting "open" events:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
+	 * On these buggy platforms, the usage model of the ACPI lid device
+	 * actually is:
+	 * 1. The initial returning value of _LID may not be reliable.
+	 * 2. The open event may not be reliable.
+	 * 3. The close event is reliable.
+	 *
+	 * But SW_LID is typed as input switch event, the input layer
+	 * checks if the event is redundant. Hence if the state is not
+	 * switched, the userspace cannot see this platform triggered
+	 * reliable event. By inserting a complement switch event, it then
+	 * is guaranteed that the platform triggered reliable one can
+	 * always be seen by the userspace.
+	 */
+	if (button->last_state == !!state && bios_notify) {
 		/* Complain the buggy firmware */
 		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
 		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
+		 * Do not generate complement switch event for "open"
+		 * events - faking "close" events can trigger unexpected
+		 * behaviors.
+		 * Thus only generate complement switch event for BIOS
+		 * notified "close".
 		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
+		if (!state) {
+			input_report_switch(button->input, SW_LID, state);
+			input_sync(button->input);
 		}
 	}
+
 	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
+	button->last_state = !!state;
+	button->last_time = ktime_get();
+	button->last_is_bios = bios_notify;
 
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
@@ -444,6 +438,8 @@ static int acpi_button_resume(struct device *dev)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	button->suspended = false;
+	/* ignore replay frequency check between suspend/resume */
+	button->last_is_bios = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
 		acpi_lid_initialize_state(device);
 	return 0;
@@ -492,6 +488,8 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		/* ignore replay frequency check after boot */
+		button->last_is_bios = false;
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
-- 
2.7.4

[RFC PATCH v3 3/5] ACPI: button: Add lid event type debugging messages

[Lv Zheng]

This patch adds very useful debugging information to lid events.
These messages and with ec_log_drv() can be used to demonstrate the order
between acpi_ec_resume() and acpi_button_resume().

Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index a72f5bf..d3f90c6 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -201,12 +201,17 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 		if (!state) {
 			input_report_switch(button->input, SW_LID, state);
 			input_sync(button->input);
+			pr_debug("faked open complement event.\n");
 		}
 	}
 
 	/* Send the platform triggered reliable event */
 	input_report_switch(button->input, SW_LID, !state);
 	input_sync(button->input);
+	if (bios_notify)
+		pr_debug("notified %s event.\n", state ? "open" : "close");
+	else
+		pr_debug("faked %s event.\n", state ? "open" : "close");
 	button->last_state = !!state;
 	button->last_time = ktime_get();
 	button->last_is_bios = bios_notify;
-- 
2.7.4

[RFC PATCH v3 3/5] ACPI: button: Add lid event type debugging messages

[Lv Zheng]

This patch adds very useful debugging information to lid events.
These messages and with ec_log_drv() can be used to demonstrate the order
between acpi_ec_resume() and acpi_button_resume().

Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index a72f5bf..d3f90c6 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -201,12 +201,17 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 		if (!state) {
 			input_report_switch(button->input, SW_LID, state);
 			input_sync(button->input);
+			pr_debug("faked open complement event.\n");
 		}
 	}
 
 	/* Send the platform triggered reliable event */
 	input_report_switch(button->input, SW_LID, !state);
 	input_sync(button->input);
+	if (bios_notify)
+		pr_debug("notified %s event.\n", state ? "open" : "close");
+	else
+		pr_debug("faked %s event.\n", state ? "open" : "close");
 	button->last_state = !!state;
 	button->last_time = ktime_get();
 	button->last_is_bios = bios_notify;
-- 
2.7.4

[RFC PATCH v3 4/5] ACPI: button: Fix lid notification

[Lv Zheng]

In acpi_lid_notify_state(), it now contains logic to avoid frequently
replayed events which originally was ensured by using blocking notifier.
On the contrary, using blocking notifier is wrong as it could keep on
returning NOTIFY_DONE, causing events lost.

This patch thus changes lid notification to raw notifier in order not to
have events lost.

Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 53 ++++++++++++++++++++++++++++-----------------------
 1 file changed, 29 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index d3f90c6..4abf8ae 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -112,7 +112,7 @@ struct acpi_button {
 	bool suspended;
 };
 
-static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
+static RAW_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 
@@ -139,11 +139,16 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device,
+static inline void acpi_lid_notifier_call(struct acpi_device *device,
+					  int state)
+{
+	(void)raw_notifier_call_chain(&acpi_lid_notifier, state, device);
+}
+
+static void acpi_lid_notify_state(struct acpi_device *device,
 				 int state, bool bios_notify)
 {
 	struct acpi_button *button = acpi_driver_data(device);
-	int ret;
 	ktime_t next_report;
 
 	/*
@@ -161,7 +166,7 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 				ms_to_ktime(lid_report_interval));
 	if (button->last_is_bios && button->last_state == !!state &&
 	    !ktime_after(ktime_get(), next_report))
-		return 0;
+		return;
 
 	/*
 	 * Send the unreliable complement switch event:
@@ -219,18 +224,7 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
-	ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
-	if (ret == NOTIFY_DONE)
-		ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
-						   device);
-	if (ret == NOTIFY_DONE || ret == NOTIFY_OK) {
-		/*
-		 * It is also regarded as success if the notifier_chain
-		 * returns NOTIFY_OK or NOTIFY_DONE.
-		 */
-		ret = 0;
-	}
-	return ret;
+	acpi_lid_notifier_call(device, state);
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -341,13 +335,24 @@ static int acpi_button_remove_fs(struct acpi_device *device)
    -------------------------------------------------------------------------- */
 int acpi_lid_notifier_register(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
+	return raw_notifier_chain_register(&acpi_lid_notifier, nb);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_register);
 
+static inline int __acpi_lid_notifier_unregister(struct notifier_block *nb,
+						 bool sync)
+{
+	int ret;
+
+	ret = raw_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	if (sync)
+		synchronize_rcu();
+	return ret;
+}
+
 int acpi_lid_notifier_unregister(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	return __acpi_lid_notifier_unregister(nb, false);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_unregister);
 
@@ -360,26 +365,26 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device,
-				 bool bios_notify)
+static void acpi_lid_update_state(struct acpi_device *device,
+				  bool bios_notify)
 {
 	int state;
 
 	state = acpi_lid_evaluate_state(device);
 	if (state < 0)
-		return state;
+		return;
 
-	return acpi_lid_notify_state(device, state, bios_notify);
+	acpi_lid_notify_state(device, state, bios_notify);
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1, false);
+		acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device, false);
+		acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
-- 
2.7.4

[RFC PATCH v3 4/5] ACPI: button: Fix lid notification

[Lv Zheng]

In acpi_lid_notify_state(), it now contains logic to avoid frequently
replayed events which originally was ensured by using blocking notifier.
On the contrary, using blocking notifier is wrong as it could keep on
returning NOTIFY_DONE, causing events lost.

This patch thus changes lid notification to raw notifier in order not to
have events lost.

Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 53 ++++++++++++++++++++++++++++-----------------------
 1 file changed, 29 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index d3f90c6..4abf8ae 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -112,7 +112,7 @@ struct acpi_button {
 	bool suspended;
 };
 
-static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
+static RAW_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 
@@ -139,11 +139,16 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device,
+static inline void acpi_lid_notifier_call(struct acpi_device *device,
+					  int state)
+{
+	(void)raw_notifier_call_chain(&acpi_lid_notifier, state, device);
+}
+
+static void acpi_lid_notify_state(struct acpi_device *device,
 				 int state, bool bios_notify)
 {
 	struct acpi_button *button = acpi_driver_data(device);
-	int ret;
 	ktime_t next_report;
 
 	/*
@@ -161,7 +166,7 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 				ms_to_ktime(lid_report_interval));
 	if (button->last_is_bios && button->last_state == !!state &&
 	    !ktime_after(ktime_get(), next_report))
-		return 0;
+		return;
 
 	/*
 	 * Send the unreliable complement switch event:
@@ -219,18 +224,7 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
-	ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
-	if (ret == NOTIFY_DONE)
-		ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
-						   device);
-	if (ret == NOTIFY_DONE || ret == NOTIFY_OK) {
-		/*
-		 * It is also regarded as success if the notifier_chain
-		 * returns NOTIFY_OK or NOTIFY_DONE.
-		 */
-		ret = 0;
-	}
-	return ret;
+	acpi_lid_notifier_call(device, state);
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -341,13 +335,24 @@ static int acpi_button_remove_fs(struct acpi_device *device)
    -------------------------------------------------------------------------- */
 int acpi_lid_notifier_register(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
+	return raw_notifier_chain_register(&acpi_lid_notifier, nb);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_register);
 
+static inline int __acpi_lid_notifier_unregister(struct notifier_block *nb,
+						 bool sync)
+{
+	int ret;
+
+	ret = raw_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	if (sync)
+		synchronize_rcu();
+	return ret;
+}
+
 int acpi_lid_notifier_unregister(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	return __acpi_lid_notifier_unregister(nb, false);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_unregister);
 
@@ -360,26 +365,26 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device,
-				 bool bios_notify)
+static void acpi_lid_update_state(struct acpi_device *device,
+				  bool bios_notify)
 {
 	int state;
 
 	state = acpi_lid_evaluate_state(device);
 	if (state < 0)
-		return state;
+		return;
 
-	return acpi_lid_notify_state(device, state, bios_notify);
+	acpi_lid_notify_state(device, state, bios_notify);
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1, false);
+		acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device, false);
+		acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
-- 
2.7.4

[RFC PATCH v3 5/5] ACPI: button: Always notify kernel space using _LID returning value

[Lv Zheng]

Both nouveau and i915, the only 2 kernel space lid notification listeners,
invoke acpi_lid_open() API to obtain _LID returning value instead of using
the notified value.

So this patch moves this logic from listeners to lid driver, always notify
kernel space listeners using _LID returning value.

This is a no-op cleanup, but facilitates administrators to configure to
notify kernel drivers with faked lid init states via command line
"button.lid_notify_init_state=Y".

Cc: <intel-gfx@lists.freedesktop.org>
Cc: <nouveau@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c             | 16 ++++++++++++++--
 drivers/gpu/drm/i915/intel_lvds.c |  2 +-
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 4abf8ae..e047d34 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
+static bool lid_notify_init_state __read_mostly = false;
+module_param(lid_notify_init_state, bool, 0644);
+MODULE_PARM_DESC(lid_notify_init_state, "Notify init lid state to kernel drivers after boot/resume");
 
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
@@ -224,6 +227,15 @@ static void acpi_lid_notify_state(struct acpi_device *device,
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
+	if (!lid_notify_init_state) {
+		/*
+		 * There are cases "state" is not a _LID return value, so
+		 * correct it before notification.
+		 */
+		if (!bios_notify &&
+		    lid_init_state != ACPI_BUTTON_LID_INIT_METHOD)
+			state = acpi_lid_evaluate_state(device);
+	}
 	acpi_lid_notifier_call(device, state);
 }
 
@@ -572,10 +584,10 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
-		pr_info("Notify initial lid state as open\n");
+		pr_info("Notify initial lid state to users space as open and kernel drivers with _LID return value\n");
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
-		pr_info("Notify initial lid state with _LID return value\n");
+		pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
 		pr_info("Do not notify initial lid state\n");
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9ca4dc4..8ca9080 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	/* Don't force modeset on machines where it causes a GPU lockup */
 	if (dmi_check_system(intel_no_modeset_on_lid))
 		goto exit;
-	if (!acpi_lid_open()) {
+	if (!val) {
 		/* do modeset on next lid open event */
 		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
 		goto exit;
-- 
2.7.4

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[RFC PATCH v3 5/5] ACPI: button: Always notify kernel space using _LID returning value

[Lv Zheng]

Both nouveau and i915, the only 2 kernel space lid notification listeners,
invoke acpi_lid_open() API to obtain _LID returning value instead of using
the notified value.

So this patch moves this logic from listeners to lid driver, always notify
kernel space listeners using _LID returning value.

This is a no-op cleanup, but facilitates administrators to configure to
notify kernel drivers with faked lid init states via command line
"button.lid_notify_init_state=Y".

Cc: <intel-gfx@lists.freedesktop.org>
Cc: <nouveau@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c             | 16 ++++++++++++++--
 drivers/gpu/drm/i915/intel_lvds.c |  2 +-
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 4abf8ae..e047d34 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
+static bool lid_notify_init_state __read_mostly = false;
+module_param(lid_notify_init_state, bool, 0644);
+MODULE_PARM_DESC(lid_notify_init_state, "Notify init lid state to kernel drivers after boot/resume");
 
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
@@ -224,6 +227,15 @@ static void acpi_lid_notify_state(struct acpi_device *device,
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
 
+	if (!lid_notify_init_state) {
+		/*
+		 * There are cases "state" is not a _LID return value, so
+		 * correct it before notification.
+		 */
+		if (!bios_notify &&
+		    lid_init_state != ACPI_BUTTON_LID_INIT_METHOD)
+			state = acpi_lid_evaluate_state(device);
+	}
 	acpi_lid_notifier_call(device, state);
 }
 
@@ -572,10 +584,10 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
-		pr_info("Notify initial lid state as open\n");
+		pr_info("Notify initial lid state to users space as open and kernel drivers with _LID return value\n");
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
-		pr_info("Notify initial lid state with _LID return value\n");
+		pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
 		pr_info("Do not notify initial lid state\n");
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9ca4dc4..8ca9080 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	/* Don't force modeset on machines where it causes a GPU lockup */
 	if (dmi_check_system(intel_no_modeset_on_lid))
 		goto exit;
-	if (!acpi_lid_open()) {
+	if (!val) {
 		/* do modeset on next lid open event */
 		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
 		goto exit;
-- 
2.7.4

Re: [RFC PATCH v3 5/5] ACPI: button: Always notify kernel space using _LID returning value

[Benjamin Tissoires]

Hi Lv,

On May 27 2017 or thereabouts, Lv Zheng wrote:
> Both nouveau and i915, the only 2 kernel space lid notification listeners,
> invoke acpi_lid_open() API to obtain _LID returning value instead of using
> the notified value.
> 
> So this patch moves this logic from listeners to lid driver, always notify
> kernel space listeners using _LID returning value.
> 
> This is a no-op cleanup, but facilitates administrators to configure to
> notify kernel drivers with faked lid init states via command line
> "button.lid_notify_init_state=Y".
> 
> Cc: <intel-gfx@lists.freedesktop.org>
> Cc: <nouveau@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c             | 16 ++++++++++++++--
>  drivers/gpu/drm/i915/intel_lvds.c |  2 +-
>  2 files changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 4abf8ae..e047d34 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
>  static unsigned long lid_report_interval __read_mostly = 500;
>  module_param(lid_report_interval, ulong, 0644);
>  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> +static bool lid_notify_init_state __read_mostly = false;
> +module_param(lid_notify_init_state, bool, 0644);
> +MODULE_PARM_DESC(lid_notify_init_state, "Notify init lid state to kernel drivers after boot/resume");
>  
>  /* --------------------------------------------------------------------------
>                                FS Interface (/proc)
> @@ -224,6 +227,15 @@ static void acpi_lid_notify_state(struct acpi_device *device,
>  	if (state)
>  		pm_wakeup_event(&device->dev, 0);
>  
> +	if (!lid_notify_init_state) {
> +		/*
> +		 * There are cases "state" is not a _LID return value, so
> +		 * correct it before notification.
> +		 */
> +		if (!bios_notify &&
> +		    lid_init_state != ACPI_BUTTON_LID_INIT_METHOD)
> +			state = acpi_lid_evaluate_state(device);
> +	}
>  	acpi_lid_notifier_call(device, state);
>  }
>  
> @@ -572,10 +584,10 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
>  
>  	if (!strncmp(val, "open", sizeof("open") - 1)) {
>  		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> -		pr_info("Notify initial lid state as open\n");
> +		pr_info("Notify initial lid state to users space as open and kernel drivers with _LID return value\n");
>  	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
>  		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> -		pr_info("Notify initial lid state with _LID return value\n");
> +		pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
>  	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
>  		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
>  		pr_info("Do not notify initial lid state\n");
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 9ca4dc4..8ca9080 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
>  	/* Don't force modeset on machines where it causes a GPU lockup */
>  	if (dmi_check_system(intel_no_modeset_on_lid))
>  		goto exit;
> -	if (!acpi_lid_open()) {
> +	if (!val) {
>  		/* do modeset on next lid open event */
>  		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
>  		goto exit;

This last hunk should really be in its own patch because the intel GPU
folks would need to apply the rest of the series for their CI suite, and
also because there is no reason for this change to be alongside any
other acpi/button.c change.

Cheers,
Benjamin

> -- 
> 2.7.4
> 

RE: [RFC PATCH v3 5/5] ACPI: button: Always notify kernel space using _LID returning value

[Zheng, Lv]

Hi,

> From: Benjamin Tissoires [mailto:benjamin.tissoires@redhat.com]
> Subject: Re: [RFC PATCH v3 5/5] ACPI: button: Always notify kernel space using _LID returning value
> 
> Hi Lv,
> 
> On May 27 2017 or thereabouts, Lv Zheng wrote:
> > Both nouveau and i915, the only 2 kernel space lid notification listeners,
> > invoke acpi_lid_open() API to obtain _LID returning value instead of using
> > the notified value.
> >
> > So this patch moves this logic from listeners to lid driver, always notify
> > kernel space listeners using _LID returning value.
> >
> > This is a no-op cleanup, but facilitates administrators to configure to
> > notify kernel drivers with faked lid init states via command line
> > "button.lid_notify_init_state=Y".
> >
> > Cc: <intel-gfx@lists.freedesktop.org>
> > Cc: <nouveau@lists.freedesktop.org>
> > Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> > Cc: Peter Hutterer <peter.hutterer@who-t.net>
> > Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> > ---
> >  drivers/acpi/button.c             | 16 ++++++++++++++--
> >  drivers/gpu/drm/i915/intel_lvds.c |  2 +-
> >  2 files changed, 15 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> > index 4abf8ae..e047d34 100644
> > --- a/drivers/acpi/button.c
> > +++ b/drivers/acpi/button.c
> > @@ -119,6 +119,9 @@ static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> >  static unsigned long lid_report_interval __read_mostly = 500;
> >  module_param(lid_report_interval, ulong, 0644);
> >  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> > +static bool lid_notify_init_state __read_mostly = false;
> > +module_param(lid_notify_init_state, bool, 0644);
> > +MODULE_PARM_DESC(lid_notify_init_state, "Notify init lid state to kernel drivers after
> boot/resume");
> >
> >  /* --------------------------------------------------------------------------
> >                                FS Interface (/proc)
> > @@ -224,6 +227,15 @@ static void acpi_lid_notify_state(struct acpi_device *device,
> >  	if (state)
> >  		pm_wakeup_event(&device->dev, 0);
> >
> > +	if (!lid_notify_init_state) {
> > +		/*
> > +		 * There are cases "state" is not a _LID return value, so
> > +		 * correct it before notification.
> > +		 */
> > +		if (!bios_notify &&
> > +		    lid_init_state != ACPI_BUTTON_LID_INIT_METHOD)
> > +			state = acpi_lid_evaluate_state(device);
> > +	}
> >  	acpi_lid_notifier_call(device, state);
> >  }
> >
> > @@ -572,10 +584,10 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
> >
> >  	if (!strncmp(val, "open", sizeof("open") - 1)) {
> >  		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> > -		pr_info("Notify initial lid state as open\n");
> > +		pr_info("Notify initial lid state to users space as open and kernel drivers with _LID
> return value\n");
> >  	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
> >  		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> > -		pr_info("Notify initial lid state with _LID return value\n");
> > +		pr_info("Notify initial lid state to user/kernel space with _LID return value\n");
> >  	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
> >  		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> >  		pr_info("Do not notify initial lid state\n");
> > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> > index 9ca4dc4..8ca9080 100644
> > --- a/drivers/gpu/drm/i915/intel_lvds.c
> > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> > @@ -548,7 +548,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
> >  	/* Don't force modeset on machines where it causes a GPU lockup */
> >  	if (dmi_check_system(intel_no_modeset_on_lid))
> >  		goto exit;
> > -	if (!acpi_lid_open()) {
> > +	if (!val) {
> >  		/* do modeset on next lid open event */
> >  		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
> >  		goto exit;
> 
> This last hunk should really be in its own patch because the intel GPU
> folks would need to apply the rest of the series for their CI suite, and
> also because there is no reason for this change to be alongside any
> other acpi/button.c change.

OK, I'll drop i915 related changes.
However I can see cleanup chances in button.c.
I feel I should at least do minimal tunings in button driver to allow future improvements.

Cheers,
Lv

> Cheers,
> Benjamin

[RFC PATCH v4 1/5] ACPI: button: Add indication of BIOS notification and faked events

[Lv Zheng]

This patch adds a parameter to acpi_lid_notify_state() so that it can act
differently against BIOS notification and kernel faked events.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 9ad8cdb..725a15a 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -138,7 +138,8 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device, int state)
+static int acpi_lid_notify_state(struct acpi_device *device,
+				 int state, bool is_bios_event)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
@@ -360,7 +361,8 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device)
+static int acpi_lid_update_state(struct acpi_device *device,
+				 bool is_bios_event)
 {
 	int state;
 
@@ -368,17 +370,17 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	if (state < 0)
 		return state;
 
-	return acpi_lid_notify_state(device, state);
+	return acpi_lid_notify_state(device, state, is_bios_event);
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1);
+		(void)acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device);
+		(void)acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -398,7 +400,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
-			acpi_lid_update_state(device);
+			acpi_lid_update_state(device, true);
 		} else {
 			int keycode;
 
-- 
2.7.4

[RFC PATCH v4 2/5] ACPI: button: Extends complement switch event support for all modes

[Lv Zheng]

Surface Pro 3 is a typical platform where suspend/resume loop problem
can be seen.

The problem is due to a systemd 229 bug:
1. "ignore": always can trigger endless suspend/resume loop
2. "open": sometimes suspend/resume loop can be stopped
3. "method": always can trigger endless susped/resume loop
The buggy systemd unexpectedly waits for an explicit "open" event after
boot/resume or it will suspends. However even when kernel can send a
faked "open" to it, its state machine is still wrong, systemd may not
respond "close" events arrived after "open" or may suddenly suspend
without seeing any instant events.

Recent systemd 233 has fixed this issue:
1. "ignore": everything works fine;
2. "open": no suspend/resume cycle, but sometimes cannot suspend the
           platform again after the first resume;
3. "method": no suspend/resume cycle, but always cannot suspend the
             platform again after the first resume.
The conclusion is: for suspend/resume cycle issue, "ignore" mode fixes
everything, but current "method" mode is still buggy.
The differences are due to button driver only implements complement switch
events for "ignore" mode. Without complement switch events, firmware
triggered "close" cannot be delivered to userspace (confirmed by
evemu-record).

The root cause of the lid state issues is the variation of the platform
firmware implementations:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.

Let's check the docking external display issues (see links below):
1. For case 1, both "method"/"ignore" modes can work correctly;
2. For case 2/4/5, both "method"/"ignore" modes cannot work correctly;
3. For case 3, "method" can work correctly while "ignore" mode cannot.
The conclusion is: for docking external display issue, though the issue
still needs graphics layer (graphics drivers or desktop managers) to be
improved to ensure no breakages for case 2/4/5 platforms, there is a case
where "method" mode plays better.

Thus ACPI subsystem has been pushed to revert back to "method" mode due to
regression rule and case 3 (platforms reported on the links should all be
case 3 platforms), and libinput developers have volunteered to help to
provide workarounds when graphics layer is not fixed or systemd is not
updated.

Thus this patch extends the complement switch event support to other modes
using new indication: generating complement switch event for BIOS notified
"close". So that when button driver is reverted back to "method" mode, it
won't act worse than "ignore" mode on fixed systemd.

Tested with systemd 233, all modes worked fine (no suspend/resume loop and
can suspend any times) after applying this patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
      https://bugzilla.redhat.com/show_bug.cgi?id=1430259

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 116 +++++++++++++++++++++++++-------------------------
 1 file changed, 57 insertions(+), 59 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 725a15a..36485cf 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -108,6 +108,7 @@ struct acpi_button {
 	unsigned long pushed;
 	int last_state;
 	ktime_t last_time;
+	bool last_is_bios;
 	bool suspended;
 };
 
@@ -144,78 +145,71 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
 	ktime_t next_report;
-	bool do_update;
 
 	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
+	 * Ignore frequently replayed switch events.
+	 *
+	 * AML tables can put Notify(LID, xxx) in a notification method,
+	 * and handling the hardware events by executing the entry methods
+	 * (ex., _Qxx) may cause the notification method to be invoked
+	 * several times.
+	 * This check doesn't apply to the faked events because if a BIOS
+	 * notification comes after a faked event, it must pass this check
+	 * in order to be reliablely delivered to user space.
 	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
 	next_report = ktime_add(button->last_time,
 				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
+	if (button->last_is_bios && button->last_state == !!state &&
+	    !ktime_after(ktime_get(), next_report))
+		return 0;
+
+	/*
+	 * Send the unreliable complement switch event:
+	 *
+	 * On most platforms, the lid device is reliable. However there are
+	 * exceptions:
+	 * 1. Platforms returning initial lid state as "close" by default
+	 *    after booting/resuming:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
+	 * 2. Platforms never reporting "open" events:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
+	 * On these buggy platforms, the usage model of the ACPI lid device
+	 * actually is:
+	 * 1. The initial returning value of _LID may not be reliable.
+	 * 2. The open event may not be reliable.
+	 * 3. The close event is reliable.
+	 *
+	 * But SW_LID is typed as input switch event, the input layer
+	 * checks if the event is redundant. Hence if the state is not
+	 * switched, the userspace cannot see this platform triggered
+	 * reliable event. By inserting a complement switch event, it then
+	 * is guaranteed that the platform triggered reliable one can
+	 * always be seen by the userspace.
+	 */
+	if (button->last_state == !!state && is_bios_event) {
 		/* Complain the buggy firmware */
 		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
 		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
+		 * Do not generate complement switch event for "open"
+		 * events - faking "close" events can trigger unexpected
+		 * behaviors.
+		 * Thus only generate complement switch event for BIOS
+		 * notified "close".
 		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
+		if (!state) {
+			input_report_switch(button->input, SW_LID, state);
+			input_sync(button->input);
 		}
 	}
+
 	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
+	button->last_state = !!state;
+	button->last_time = ktime_get();
+	button->last_is_bios = is_bios_event;
 
 	if (state)
 		pm_wakeup_hard_event(&device->dev);
@@ -444,6 +438,8 @@ static int acpi_button_resume(struct device *dev)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	button->suspended = false;
+	/* ignore replay frequency check between suspend/resume */
+	button->last_is_bios = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
 		acpi_lid_initialize_state(device);
 	return 0;
@@ -492,6 +488,8 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		/* ignore replay frequency check after boot */
+		button->last_is_bios = false;
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v4 2/5] ACPI: button: Extends complement switch event support for all modes

[Lv Zheng]

Surface Pro 3 is a typical platform where suspend/resume loop problem
can be seen.

The problem is due to a systemd 229 bug:
1. "ignore": always can trigger endless suspend/resume loop
2. "open": sometimes suspend/resume loop can be stopped
3. "method": always can trigger endless susped/resume loop
The buggy systemd unexpectedly waits for an explicit "open" event after
boot/resume or it will suspends. However even when kernel can send a
faked "open" to it, its state machine is still wrong, systemd may not
respond "close" events arrived after "open" or may suddenly suspend
without seeing any instant events.

Recent systemd 233 has fixed this issue:
1. "ignore": everything works fine;
2. "open": no suspend/resume cycle, but sometimes cannot suspend the
           platform again after the first resume;
3. "method": no suspend/resume cycle, but always cannot suspend the
             platform again after the first resume.
The conclusion is: for suspend/resume cycle issue, "ignore" mode fixes
everything, but current "method" mode is still buggy.
The differences are due to button driver only implements complement switch
events for "ignore" mode. Without complement switch events, firmware
triggered "close" cannot be delivered to userspace (confirmed by
evemu-record).

The root cause of the lid state issues is the variation of the platform
firmware implementations:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.

Let's check the docking external display issues (see links below):
1. For case 1, both "method"/"ignore" modes can work correctly;
2. For case 2/4/5, both "method"/"ignore" modes cannot work correctly;
3. For case 3, "method" can work correctly while "ignore" mode cannot.
The conclusion is: for docking external display issue, though the issue
still needs graphics layer (graphics drivers or desktop managers) to be
improved to ensure no breakages for case 2/4/5 platforms, there is a case
where "method" mode plays better.

Thus ACPI subsystem has been pushed to revert back to "method" mode due to
regression rule and case 3 (platforms reported on the links should all be
case 3 platforms), and libinput developers have volunteered to help to
provide workarounds when graphics layer is not fixed or systemd is not
updated.

Thus this patch extends the complement switch event support to other modes
using new indication: generating complement switch event for BIOS notified
"close". So that when button driver is reverted back to "method" mode, it
won't act worse than "ignore" mode on fixed systemd.

Tested with systemd 233, all modes worked fine (no suspend/resume loop and
can suspend any times) after applying this patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
      https://bugzilla.redhat.com/show_bug.cgi?id=1430259

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 116 +++++++++++++++++++++++++-------------------------
 1 file changed, 57 insertions(+), 59 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 725a15a..36485cf 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -108,6 +108,7 @@ struct acpi_button {
 	unsigned long pushed;
 	int last_state;
 	ktime_t last_time;
+	bool last_is_bios;
 	bool suspended;
 };
 
@@ -144,78 +145,71 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
 	ktime_t next_report;
-	bool do_update;
 
 	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
+	 * Ignore frequently replayed switch events.
+	 *
+	 * AML tables can put Notify(LID, xxx) in a notification method,
+	 * and handling the hardware events by executing the entry methods
+	 * (ex., _Qxx) may cause the notification method to be invoked
+	 * several times.
+	 * This check doesn't apply to the faked events because if a BIOS
+	 * notification comes after a faked event, it must pass this check
+	 * in order to be reliablely delivered to user space.
 	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
 	next_report = ktime_add(button->last_time,
 				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
+	if (button->last_is_bios && button->last_state == !!state &&
+	    !ktime_after(ktime_get(), next_report))
+		return 0;
+
+	/*
+	 * Send the unreliable complement switch event:
+	 *
+	 * On most platforms, the lid device is reliable. However there are
+	 * exceptions:
+	 * 1. Platforms returning initial lid state as "close" by default
+	 *    after booting/resuming:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
+	 * 2. Platforms never reporting "open" events:
+	 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
+	 * On these buggy platforms, the usage model of the ACPI lid device
+	 * actually is:
+	 * 1. The initial returning value of _LID may not be reliable.
+	 * 2. The open event may not be reliable.
+	 * 3. The close event is reliable.
+	 *
+	 * But SW_LID is typed as input switch event, the input layer
+	 * checks if the event is redundant. Hence if the state is not
+	 * switched, the userspace cannot see this platform triggered
+	 * reliable event. By inserting a complement switch event, it then
+	 * is guaranteed that the platform triggered reliable one can
+	 * always be seen by the userspace.
+	 */
+	if (button->last_state == !!state && is_bios_event) {
 		/* Complain the buggy firmware */
 		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
 		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
+		 * Do not generate complement switch event for "open"
+		 * events - faking "close" events can trigger unexpected
+		 * behaviors.
+		 * Thus only generate complement switch event for BIOS
+		 * notified "close".
 		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
+		if (!state) {
+			input_report_switch(button->input, SW_LID, state);
+			input_sync(button->input);
 		}
 	}
+
 	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
+	button->last_state = !!state;
+	button->last_time = ktime_get();
+	button->last_is_bios = is_bios_event;
 
 	if (state)
 		pm_wakeup_hard_event(&device->dev);
@@ -444,6 +438,8 @@ static int acpi_button_resume(struct device *dev)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	button->suspended = false;
+	/* ignore replay frequency check between suspend/resume */
+	button->last_is_bios = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
 		acpi_lid_initialize_state(device);
 	return 0;
@@ -492,6 +488,8 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		/* ignore replay frequency check after boot */
+		button->last_is_bios = false;
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
-- 
2.7.4

[RFC PATCH v4 3/5] ACPI: button: Add lid event type debugging messages

[Lv Zheng]

This patch adds very useful debugging information to lid events.
These messages and with ec_log_drv() can be used to demonstrate the order
between acpi_ec_resume() and acpi_button_resume().

Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 36485cf..13b75e6 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -201,12 +201,17 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 		if (!state) {
 			input_report_switch(button->input, SW_LID, state);
 			input_sync(button->input);
+			pr_debug("faked open complement event.\n");
 		}
 	}
 
 	/* Send the platform triggered reliable event */
 	input_report_switch(button->input, SW_LID, !state);
 	input_sync(button->input);
+	if (is_bios_event)
+		pr_debug("notified %s event.\n", state ? "open" : "close");
+	else
+		pr_debug("faked %s event.\n", state ? "open" : "close");
 	button->last_state = !!state;
 	button->last_time = ktime_get();
 	button->last_is_bios = is_bios_event;
-- 
2.7.4

[RFC PATCH v4 4/5] ACPI: button: Fix lid notification locks

[Lv Zheng]

In acpi_lid_notify_state(), it now contains logic to avoid frequently
replayed events which originally was ensured by using blocking notifier.
On the contrary, using blocking notifier is wrong as it could keep on
returning NOTIFY_DONE, causing events lost.

This patch thus changes lid notification to raw notifier in order not to
have events lost.

Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 53 ++++++++++++++++++++++++++++-----------------------
 1 file changed, 29 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 13b75e6..a64b3f8 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -112,7 +112,7 @@ struct acpi_button {
 	bool suspended;
 };
 
-static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
+static RAW_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 
@@ -139,11 +139,16 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
 	return lid_state ? 1 : 0;
 }
 
-static int acpi_lid_notify_state(struct acpi_device *device,
+static inline void acpi_lid_notifier_call(struct acpi_device *device,
+					  int state)
+{
+	(void)raw_notifier_call_chain(&acpi_lid_notifier, state, device);
+}
+
+static void acpi_lid_notify_state(struct acpi_device *device,
 				 int state, bool is_bios_event)
 {
 	struct acpi_button *button = acpi_driver_data(device);
-	int ret;
 	ktime_t next_report;
 
 	/*
@@ -161,7 +166,7 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 				ms_to_ktime(lid_report_interval));
 	if (button->last_is_bios && button->last_state == !!state &&
 	    !ktime_after(ktime_get(), next_report))
-		return 0;
+		return;
 
 	/*
 	 * Send the unreliable complement switch event:
@@ -219,18 +224,7 @@ static int acpi_lid_notify_state(struct acpi_device *device,
 	if (state)
 		pm_wakeup_hard_event(&device->dev);
 
-	ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
-	if (ret == NOTIFY_DONE)
-		ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
-						   device);
-	if (ret == NOTIFY_DONE || ret == NOTIFY_OK) {
-		/*
-		 * It is also regarded as success if the notifier_chain
-		 * returns NOTIFY_OK or NOTIFY_DONE.
-		 */
-		ret = 0;
-	}
-	return ret;
+	acpi_lid_notifier_call(device, state);
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -341,13 +335,24 @@ static int acpi_button_remove_fs(struct acpi_device *device)
    -------------------------------------------------------------------------- */
 int acpi_lid_notifier_register(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
+	return raw_notifier_chain_register(&acpi_lid_notifier, nb);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_register);
 
+static inline int __acpi_lid_notifier_unregister(struct notifier_block *nb,
+						 bool sync)
+{
+	int ret;
+
+	ret = raw_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	if (sync)
+		synchronize_rcu();
+	return ret;
+}
+
 int acpi_lid_notifier_unregister(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
+	return __acpi_lid_notifier_unregister(nb, false);
 }
 EXPORT_SYMBOL(acpi_lid_notifier_unregister);
 
@@ -360,26 +365,26 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
-static int acpi_lid_update_state(struct acpi_device *device,
-				 bool is_bios_event)
+static void acpi_lid_update_state(struct acpi_device *device,
+				  bool is_bios_event)
 {
 	int state;
 
 	state = acpi_lid_evaluate_state(device);
 	if (state < 0)
-		return state;
+		return;
 
-	return acpi_lid_notify_state(device, state, is_bios_event);
+	acpi_lid_notify_state(device, state, is_bios_event);
 }
 
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1, false);
+		acpi_lid_notify_state(device, 1, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device, false);
+		acpi_lid_update_state(device, false);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
-- 
2.7.4

[RFC PATCH v4 5/5] ACPI: button: Cleanup lid notification logics

[Lv Zheng]

Both nouveau and i915, the only 2 kernel space lid notification listeners,
invoke acpi_lid_open() API to obtain _LID returning value instead of using
the notified value. So kernel graphics drivers are only interested in _LID
return value, hence this patch makes this logic explicit in button driver.

However the preference may because kernel graphics drivers do not want to
receive non-bios notifications. Thus this patch also adds a global variable
to allow button driver to stop notifying non-bios notifications.

This is a no-op cleanup as the default behaviors are kept unchanged, but
may:
1. improve button.lid_init_state=method by introducing a possibility to
   allow kernel graphics driver to reduce redundant _LID evaluations, and
2. improve button.lid_init_state=open/method by introducing a possibility
   to stop notifying faked non bios events.

Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

Index: linux-acpica/drivers/acpi/button.c
===================================================================
--- linux-acpica.orig/drivers/acpi/button.c
+++ linux-acpica/drivers/acpi/button.c
@@ -119,6 +119,7 @@ static u8 lid_init_state = ACPI_BUTTON_L
 static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
+static bool lid_notify_non_bios_events = true;
 
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
@@ -224,7 +225,17 @@ static void acpi_lid_notify_state(struct
 	if (state)
 		pm_wakeup_hard_event(&device->dev);
 
-	acpi_lid_notifier_call(device, state);
+	if (is_bios_event || lid_notify_non_bios_events) {
+		/*
+		 * The kernel drivers are only interested in the _LID
+		 * return value. But there are cases "state" is not a _LID
+		 * return value, so correct it before notifying.
+		 */
+		if (!is_bios_event &&
+		    lid_init_state != ACPI_BUTTON_LID_INIT_METHOD)
+			state = acpi_lid_evaluate_state(device);
+		acpi_lid_notifier_call(device, state);
+	}
 }
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
@@ -573,13 +584,13 @@ static int param_set_lid_init_state(cons
 
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
-		pr_info("Notify initial lid state as open\n");
+		pr_info("Report initial lid state as open to input layer\n");
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
-		pr_info("Notify initial lid state with _LID return value\n");
+		pr_info("Report initial lid state with _LID return value to input layer\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
-		pr_info("Do not notify initial lid state\n");
+		pr_info("Do not report initial lid state to input layer\n");
 	} else
 		result = -EINVAL;
 	return result;

[RFC PATCH 0/2] ACPI: button: Fix button.lid_init_state=method mode

[Lv Zheng]

The following approach fixes button.lid_init_state=method mode for
systemd 233:
 https://patchwork.kernel.org/patch/9756457/
 https://patchwork.kernel.org/patch/9756467/
But it is not working well with old systemd 229. This solution tries to
make a more comfortable approach for systemd 229.

There are platform variations implementing ACPI lid device in different
way:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.

[PATCH 1] tries to fix case 2,4, making them working with any systemd.
[PATCH 2] tries to fix case 5, making it working with systemd 233.
          This is also a replacement of the following solution:
           https://patchwork.kernel.org/patch/9760867/
          It seems adding/removing input node and requesting systemd to
          change again is unnecessary for such platforms, so this patch
          simply converts "lid_unreliable" into
          "button.lid_init_state=ignore".

This material is just sent to demonstrate solutions and issues, the
final solution is not determined yet. So marking them as RFC.

Lv Zheng (2):
  ACPI: button: Fix issue that button notify cannot report stateful
    SW_LID state
  ACPI: button: Add a quirk mode for Surface Pro 1 like laptop

 drivers/acpi/button.c | 188 ++++++++++++++++++++++++--------------------------
 1 file changed, 89 insertions(+), 99 deletions(-)

-- 
2.7.4

[RFC PATCH v5 1/2] ACPI: button: Fix issue that button notify cannot report stateful SW_LID state

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, only case 1,3 works fine with systemd 229.

Case 2,4 can be treated as an order issue. This patch first fixes this
issue by defer sending initial lid state 10 seconds later after resume,
which ensures acpi_ec_resume() is always invoked before
acpi_button_resume().

However we can see different problems due to systemd bugs:
  systemd won't suspend right after seeing "close" event, it has a timeout,
  within the timeout, user may opens lid again. But even lid
  firmware/driver properly deliver this "open" to user space, when the
  timeout tickes, systemd still suspends the platform.
  Then user has to close/open again to wake the system up. Noticing that
  the first close event will remain in firmware, after resume, user space
  can still see a "close" followed by "open", and nothing can stop systemd
  from suspending again.
This problem can only be fixed by continously updating lid state. Thus
this patch doesn't kill the timer after seeing the BIOS notification, but
continously sending _LID return value to the input layer for
button.lid_init_state=method mode.

The users can configure update interval via button.lid_update_interval.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 36 +++++++++++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index e19f530..fd8eff6 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -28,6 +28,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/input.h>
+#include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <acpi/button.h>
@@ -79,6 +80,7 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids);
 static int acpi_button_add(struct acpi_device *device);
 static int acpi_button_remove(struct acpi_device *device);
 static void acpi_button_notify(struct acpi_device *device, u32 event);
+static void acpi_lid_timeout(ulong arg);
 
 #ifdef CONFIG_PM_SLEEP
 static int acpi_button_suspend(struct device *dev);
@@ -104,6 +106,7 @@ static struct acpi_driver acpi_button_driver = {
 struct acpi_button {
 	unsigned int type;
 	struct input_dev *input;
+	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
 	int last_state;
@@ -119,6 +122,10 @@ static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
 
+static unsigned long lid_update_interval __read_mostly = 10 * MSEC_PER_SEC;
+module_param(lid_update_interval, ulong, 0644);
+MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid state updates");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -371,17 +378,25 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	return acpi_lid_notify_state(device, state);
 }
 
-static void acpi_lid_initialize_state(struct acpi_device *device)
+static void acpi_lid_tick(struct acpi_device *device)
+{
+	struct acpi_button *button = acpi_driver_data(device);
+
+	mod_timer(&button->lid_timer,
+		  jiffies + msecs_to_jiffies(lid_update_interval));
+}
+
+static void acpi_lid_timeout(ulong arg)
 {
+	struct acpi_device *device = (struct acpi_device *)arg;
+
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		(void)acpi_lid_notify_state(device, 1);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device);
-		break;
-	case ACPI_BUTTON_LID_INIT_IGNORE:
-	default:
+		acpi_lid_update_state(device);
+		acpi_lid_tick(device);
 		break;
 	}
 }
@@ -432,6 +447,8 @@ static int acpi_button_suspend(struct device *dev)
 	struct acpi_device *device = to_acpi_device(dev);
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer(&button->lid_timer);
 	button->suspended = true;
 	return 0;
 }
@@ -443,7 +460,7 @@ static int acpi_button_resume(struct device *dev)
 
 	button->suspended = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
-		acpi_lid_initialize_state(device);
+		acpi_lid_tick(device);
 	return 0;
 }
 #endif
@@ -467,6 +484,7 @@ static int acpi_button_add(struct acpi_device *device)
 		error = -ENOMEM;
 		goto err_free_button;
 	}
+	init_timer(&button->lid_timer);
 
 	name = acpi_device_name(device);
 	class = acpi_device_class(device);
@@ -490,6 +508,8 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		setup_timer(&button->lid_timer,
+			    acpi_lid_timeout, (ulong)device);
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
@@ -526,7 +546,7 @@ static int acpi_button_add(struct acpi_device *device)
 	if (error)
 		goto err_remove_fs;
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
-		acpi_lid_initialize_state(device);
+		acpi_lid_tick(device);
 		/*
 		 * This assumes there's only one lid device, or if there are
 		 * more we only care about the last one...
@@ -550,6 +570,8 @@ static int acpi_button_remove(struct acpi_device *device)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer(&button->lid_timer);
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
 	kfree(button);
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v5 1/2] ACPI: button: Fix issue that button notify cannot report stateful SW_LID state

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, only case 1,3 works fine with systemd 229.

Case 2,4 can be treated as an order issue. This patch first fixes this
issue by defer sending initial lid state 10 seconds later after resume,
which ensures acpi_ec_resume() is always invoked before
acpi_button_resume().

However we can see different problems due to systemd bugs:
  systemd won't suspend right after seeing "close" event, it has a timeout,
  within the timeout, user may opens lid again. But even lid
  firmware/driver properly deliver this "open" to user space, when the
  timeout tickes, systemd still suspends the platform.
  Then user has to close/open again to wake the system up. Noticing that
  the first close event will remain in firmware, after resume, user space
  can still see a "close" followed by "open", and nothing can stop systemd
  from suspending again.
This problem can only be fixed by continously updating lid state. Thus
this patch doesn't kill the timer after seeing the BIOS notification, but
continously sending _LID return value to the input layer for
button.lid_init_state=method mode.

The users can configure update interval via button.lid_update_interval.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 36 +++++++++++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index e19f530..fd8eff6 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -28,6 +28,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/input.h>
+#include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <acpi/button.h>
@@ -79,6 +80,7 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids);
 static int acpi_button_add(struct acpi_device *device);
 static int acpi_button_remove(struct acpi_device *device);
 static void acpi_button_notify(struct acpi_device *device, u32 event);
+static void acpi_lid_timeout(ulong arg);
 
 #ifdef CONFIG_PM_SLEEP
 static int acpi_button_suspend(struct device *dev);
@@ -104,6 +106,7 @@ static struct acpi_driver acpi_button_driver = {
 struct acpi_button {
 	unsigned int type;
 	struct input_dev *input;
+	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
 	int last_state;
@@ -119,6 +122,10 @@ static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
 
+static unsigned long lid_update_interval __read_mostly = 10 * MSEC_PER_SEC;
+module_param(lid_update_interval, ulong, 0644);
+MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid state updates");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -371,17 +378,25 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	return acpi_lid_notify_state(device, state);
 }
 
-static void acpi_lid_initialize_state(struct acpi_device *device)
+static void acpi_lid_tick(struct acpi_device *device)
+{
+	struct acpi_button *button = acpi_driver_data(device);
+
+	mod_timer(&button->lid_timer,
+		  jiffies + msecs_to_jiffies(lid_update_interval));
+}
+
+static void acpi_lid_timeout(ulong arg)
 {
+	struct acpi_device *device = (struct acpi_device *)arg;
+
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		(void)acpi_lid_notify_state(device, 1);
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
-		(void)acpi_lid_update_state(device);
-		break;
-	case ACPI_BUTTON_LID_INIT_IGNORE:
-	default:
+		acpi_lid_update_state(device);
+		acpi_lid_tick(device);
 		break;
 	}
 }
@@ -432,6 +447,8 @@ static int acpi_button_suspend(struct device *dev)
 	struct acpi_device *device = to_acpi_device(dev);
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer(&button->lid_timer);
 	button->suspended = true;
 	return 0;
 }
@@ -443,7 +460,7 @@ static int acpi_button_resume(struct device *dev)
 
 	button->suspended = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
-		acpi_lid_initialize_state(device);
+		acpi_lid_tick(device);
 	return 0;
 }
 #endif
@@ -467,6 +484,7 @@ static int acpi_button_add(struct acpi_device *device)
 		error = -ENOMEM;
 		goto err_free_button;
 	}
+	init_timer(&button->lid_timer);
 
 	name = acpi_device_name(device);
 	class = acpi_device_class(device);
@@ -490,6 +508,8 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		setup_timer(&button->lid_timer,
+			    acpi_lid_timeout, (ulong)device);
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
@@ -526,7 +546,7 @@ static int acpi_button_add(struct acpi_device *device)
 	if (error)
 		goto err_remove_fs;
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
-		acpi_lid_initialize_state(device);
+		acpi_lid_tick(device);
 		/*
 		 * This assumes there's only one lid device, or if there are
 		 * more we only care about the last one...
@@ -550,6 +570,8 @@ static int acpi_button_remove(struct acpi_device *device)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer(&button->lid_timer);
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
 	kfree(button);
-- 
2.7.4

[lkp-robot] [ACPI] 4d0c35c1af: BUG:scheduling_while_atomic

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12315 bytes --]


FYI, we noticed the following commit:

commit: 4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63 ("ACPI: button: Fix issue that button notify cannot report stateful SW_LID state")
url: https://github.com/0day-ci/linux/commits/Lv-Zheng/ACPI-button-Fix-button-lid_init_state-method-mode/20170608-210525


in testcase: netperf
with following parameters:

	ip: ipv4
	runtime: 300s
	nr_threads: 200%
	cluster: cs-localhost
	test: TCP_CRR
	cpufreq_governor: performance

test-description: Netperf is a benchmark that can be use to measure various aspect of networking performance.
test-url: http://www.netperf.org/netperf/


on test machine: 4 threads Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz with 4G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+---------------------------------------------------------------------------+----------+------------+
|                                                                           | v4.9-rc8 | 4d0c35c1af |
+---------------------------------------------------------------------------+----------+------------+
| boot_successes                                                            | 1249     | 2          |
| boot_failures                                                             | 100      | 10         |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/irq/manage.c  | 17       |            |
| calltrace:SyS_write                                                       | 8        |            |
| calltrace:init_netconsole                                                 | 9        |            |
| calltrace:SyS_finit_module                                                | 40       | 1          |
| WARNING:at_drivers/gpu/drm/i915/intel_display.c:#intel_modeset_init[i915] | 20       | 1          |
| calltrace:i915_init                                                       | 20       | 1          |
| drm:intel_set_cpu_fifo_underrun_reporting[i915]]                          | 1        |            |
| drm:intel_cpu_fifo_underrun_irq_handler[i915]]                            | 1        |            |
| drm:intel_set_pch_fifo_underrun_reporting[i915]]                          | 1        |            |
| drm:intel_pch_fifo_underrun_irq_handler[i915]]                            | 1        |            |
| WARNING:at_fs/sysfs/dir.c:#sysfs_warn_dup                                 | 11       |            |
| calltrace:parport_pc_init                                                 | 11       |            |
| WARNING:at_lib/kobject.c:#kobject_add_internal                            | 11       |            |
| invoked_oom-killer:gfp_mask=0x                                            | 27       | 2          |
| Mem-Info                                                                  | 27       | 2          |
| Kernel_panic-not_syncing:Out_of_memory_and_no_killable_processes          | 27       | 2          |
| BUG:kernel_hang_in_test_stage                                             | 11       |            |
| WARNING:at_net/mac80211/driver-ops.h:#ieee80211_set_default_key[mac80211] | 7        |            |
| calltrace:SyS_sendmsg                                                     | 7        |            |
| WARNING:at_net/mac80211/driver-ops.h:#ieee80211_key_replace[mac80211]     | 7        |            |
| BUG:kernel_hang_in_boot_stage                                             | 2        |            |
| BUG:kernel_in_stage                                                       | 11       |            |
| BUG:scheduling_while_atomic                                               | 0        | 8          |
| WARNING:at_kernel/time/timer.c:#call_timer_fn                             | 0        | 8          |
| BUG:sleeping_function_called_from_invalid_context_at_mm/slab.h            | 0        | 8          |
| calltrace:intel_lid_notify                                                | 0        | 8          |
| calltrace:SyS_sendto                                                      | 0        | 8          |
| calltrace:SyS_connect                                                     | 0        | 8          |
| calltrace:SyS_read                                                        | 0        | 4          |
| calltrace:smpboot_thread_fn                                               | 0        | 8          |
| calltrace:SyS_recvfrom                                                    | 0        | 7          |
| calltrace:SyS_accept                                                      | 0        | 5          |
| BUG:unable_to_handle_kernel                                               | 0        | 6          |
| Oops:#[##]                                                                | 0        | 6          |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt                     | 0        | 6          |
| calltrace:SyS_socket                                                      | 0        | 3          |
| WARNING:at_net/sched/sch_generic.c:#dev_watchdog                          | 0        | 1          |
| BUG:soft_lockup-CPU##stuck_for#s                                          | 0        | 2          |
| Kernel_panic-not_syncing:softlockup:hung_tasks                            | 0        | 2          |
| WARNING:at_arch/x86/kernel/smp.c:#native_smp_send_reschedule              | 0        | 1          |
| INFO:rcu_sched_detected_stalls_on_CPUs/tasks                              | 0        | 1          |
| RIP:smp_call_function_many                                                | 0        | 1          |
| calltrace:SyS_seccomp                                                     | 0        | 1          |
| calltrace:SyS_nanosleep                                                   | 0        | 1          |
| calltrace:SyS_bind                                                        | 0        | 1          |
+---------------------------------------------------------------------------+----------+------------+



[   16.440882] BUG: scheduling while atomic: swapper/2/0/0x00000102
[   16.441400] Modules linked in:
[   16.441750] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-rc8-00001-g4d0c35c #1
[   16.442346] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   16.443007]  ffff880112a837b0 ffffffff81477139 0000000000000000 ffff880112a993c0
[   16.443830]  ffff880112a837c0 ffffffff810a7d04 ffff880112a83818 ffffffff81962ed4
[   16.444651]  0000000000000422 0000000000000008 ffff880112a993c0 ffff880112a837f8
[   16.445473] Call Trace:
[   16.446670]  <IRQ> 
[   16.446857]  [<ffffffff81477139>] dump_stack+0x63/0x8a
[   16.447329]  [<ffffffff810a7d04>] __schedule_bug+0x54/0x70
[   16.447766]  [<ffffffff81962ed4>] __schedule+0x554/0x6f0
[   16.448191]  [<ffffffff819630ad>] schedule+0x3d/0x90
[   16.448594]  [<ffffffff819666f6>] schedule_timeout+0x1d6/0x3f0
[   16.449052]  [<ffffffff810f0340>] ? del_timer_sync+0x50/0x50
[   16.449501]  [<ffffffff810c634f>] ? prepare_to_wait_event+0x7f/0x100
[   16.449989]  [<ffffffff81506972>] ec_guard+0x173/0x1b1
[   16.450405]  [<ffffffff810c63d0>] ? prepare_to_wait_event+0x100/0x100
[   16.450897]  [<ffffffff81507956>] acpi_ec_transaction+0x13f/0x2f2
[   16.451369]  [<ffffffff81507b56>] acpi_ec_read+0x4d/0x59
[   16.451794]  [<ffffffff81507cb9>] acpi_ec_space_handler+0xce/0x183
[   16.452271]  [<ffffffff814fdb35>] ? acpi_os_signal_semaphore+0x74/0x84
[   16.452771]  [<ffffffff81542030>] ? acpi_ut_release_mutex+0x11c/0x127
[   16.453264]  [<ffffffff8151b2b3>] acpi_ev_address_space_dispatch+0x2ce/0x33a
[   16.453792]  [<ffffffff81507beb>] ? ec_transaction+0x4f/0x4f
[   16.454239]  [<ffffffff81522ef6>] acpi_ex_access_region+0x414/0x4ca
[   16.454719]  [<ffffffff810a81da>] ? __might_sleep+0x4a/0x80
[   16.455159]  [<ffffffff81523386>] acpi_ex_field_datum_io+0x178/0x3fa
[   16.455647]  [<ffffffff8152392c>] acpi_ex_extract_from_field+0x151/0x2bb
[   16.456157]  [<ffffffff81522592>] acpi_ex_read_data_from_field+0x380/0x3d0
[   16.456676]  [<ffffffff815279f2>] acpi_ex_resolve_node_to_value+0x326/0x443
[   16.457202]  [<ffffffff81527e83>] acpi_ex_resolve_to_value+0x374/0x40e
[   16.457700]  [<ffffffff81515151>] acpi_ds_evaluate_name_path+0xa3/0x143
[   16.458204]  [<ffffffff815157c0>] acpi_ds_exec_end_op+0xd1/0x6c6
[   16.458670]  [<ffffffff815365c5>] acpi_ps_parse_loop+0x7d7/0x873
[   16.459137]  [<ffffffff8153f1f3>] ? acpi_ut_trace+0x26/0x66
[   16.459579]  [<ffffffff8153786c>] acpi_ps_parse_aml+0x1ac/0x4a1
[   16.460041]  [<ffffffff81538526>] acpi_ps_execute_method+0x1f4/0x2b6
[   16.460529]  [<ffffffff8152f567>] acpi_ns_evaluate+0x2ee/0x435
[   16.460985]  [<ffffffff81534209>] acpi_evaluate_object+0x178/0x38e
[   16.461463]  [<ffffffff814fe210>] acpi_evaluate_integer+0x44/0xca
[   16.461934]  [<ffffffff810aba12>] ? check_preempt_curr+0x52/0x90
[   16.462403]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.462880]  [<ffffffff81544b04>] acpi_lid_evaluate_state+0x1c/0x33
[   16.463401]  [<ffffffff815451f9>] acpi_lid_update_state+0x16/0x27
[   16.463875]  [<ffffffff8154535d>] acpi_lid_timeout+0x20/0x37
[   16.464320]  [<ffffffff810f0385>] call_timer_fn+0x35/0x130
[   16.464756]  [<ffffffff810f0962>] run_timer_softirq+0x222/0x4e0
[   16.465218]  [<ffffffff810f8c01>] ? ktime_get+0x41/0xb0
[   16.465640]  [<ffffffff81053256>] ? lapic_next_deadline+0x26/0x30
[   16.466112]  [<ffffffff8196af74>] __do_softirq+0x104/0x2ab
[   16.466550]  [<ffffffff810869c1>] irq_exit+0xf1/0x100
[   16.466959]  [<ffffffff8196ad72>] smp_apic_timer_interrupt+0x42/0x50
[   16.467446]  [<ffffffff81969f2c>] apic_timer_interrupt+0x8c/0xa0
[   16.467908]  <EOI> 
[   16.468089]  [<ffffffff817d3b12>] ? cpuidle_enter_state+0x122/0x2e0
[   16.468669]  [<ffffffff817d3d07>] cpuidle_enter+0x17/0x20
[   16.469099]  [<ffffffff810c6983>] call_cpuidle+0x23/0x40
[   16.469525]  [<ffffffff810c6bb4>] cpu_startup_entry+0x114/0x200
[   16.469988]  [<ffffffff81051d57>] start_secondary+0x107/0x130
[   16.470515] ACPI : button: The lid device is not compliant to SW_LID.
[   16.471013] ------------[ cut here ]------------
[   16.471397] WARNING: CPU: 2 PID: 0 at kernel/time/timer.c:1315 call_timer_fn+0x128/0x130
[   16.472117] timer: acpi_lid_timeout+0x0/0x37 preempt leak: 00000101 -> 00000000
[   16.472699] Modules linked in:
[   16.473046] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G        W       4.9.0-rc8-00001-g4d0c35c #1
[   16.473713] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   16.474368]  ffff880112a83de8 ffffffff81477139 ffff880112a83e38 0000000000000000
[   16.475191]  ffff880112a83e28 ffffffff810803db 0000052300000246 0000000000000001
[   16.476013]  ffff8800b4f0b190 0000000000000101 ffffffff8154533d ffff88010d4e5800
[   16.476835] Call Trace:
[   16.477082]  <IRQ> 
[   16.477262]  [<ffffffff81477139>] dump_stack+0x63/0x8a
[   16.477734]  [<ffffffff810803db>] __warn+0xcb/0xf0
[   16.478128]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.478603]  [<ffffffff8108044f>] warn_slowpath_fmt+0x4f/0x60
[   16.479054]  [<ffffffff81544a59>] ? acpi_lid_tick+0x2f/0x32
[   16.479494]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.479970]  [<ffffffff810f0478>] call_timer_fn+0x128/0x130
[   16.480410]  [<ffffffff810f0962>] run_timer_softirq+0x222/0x4e0
[   16.480871]  [<ffffffff810f8c01>] ? ktime_get+0x41/0xb0
[   16.481290]  [<ffffffff81053256>] ? lapic_next_deadline+0x26/0x30
[   16.481763]  [<ffffffff8196af74>] __do_softirq+0x104/0x2ab
[   16.482199]  [<ffffffff810869c1>] irq_exit+0xf1/0x100
[   16.482607]  [<ffffffff8196ad72>] smp_apic_timer_interrupt+0x42/0x50
[   16.483093]  [<ffffffff81969f2c>] apic_timer_interrupt+0x8c/0xa0
[   16.483555]  <EOI> 
[   16.483734]  [<ffffffff817d3b12>] ? cpuidle_enter_state+0x122/0x2e0
[   16.484313]  [<ffffffff817d3d07>] cpuidle_enter+0x17/0x20
[   16.484745]  [<ffffffff810c6983>] call_cpuidle+0x23/0x40
[   16.485169]  [<ffffffff810c6bb4>] cpu_startup_entry+0x114/0x200
[   16.485630]  [<ffffffff81051d57>] start_secondary+0x107/0x130
[   16.486081] ---[ end trace 1414925b5a440cdd ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Xiaolong

[-- Attachment #2: config-4.9.0-rc8-00001-g4d0c35c --]
[-- Type: text/plain, Size: 154152 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.9.0-rc8 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_MLX_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
# CONFIG_ACPI_NFIT_DEBUG is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
# CONFIG_VMD is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_RAM_DAX is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PANEL is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_CACHE_CLEANER=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
# CONFIG_I40E_FCOE is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
# CONFIG_MVNETA_BM is not set
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP_NETVF is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y

#
# MDIO bus device drivers
#
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=m
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_ZX is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_LEGACY is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
# CONFIG_EDAC_SKX is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set

#
# Old ISDN4Linux (deprecated)
#
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_MEMTEST is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 7173 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='netperf'
	export testcase='netperf'
	export category='benchmark'
	export disable_latency_stats=1
	export set_nic_irq_affinity=1
	export ip='ipv4'
	export runtime=300
	export nr_threads=8
	export cluster='cs-localhost'
	export job_origin='/lkp/lkp/.src-20170608-214239/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml'
	export queue='validate'
	export testbox='lkp-u410'
	export tbox_group='lkp-u410'
	export submit_id='593becca0b9a935ec5b18d2e'
	export job_file='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.yaml'
	export id='d6b02f453070f9a11e33ab3c79ad16db8032eac9'
	export model='Ivy Bridge'
	export nr_cpu=4
	export memory='4G'
	export nr_hdd_partitions=0
	export hdd_partitions=
	export netconsole_port=6674
	export brand='Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'
	export commit='4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63'
	export kconfig='x86_64-rhel-7.2'
	export compiler='gcc-6'
	export rootfs='debian-x86_64-2016-08-31.cgz'
	export enqueue_time='2017-06-10 20:57:46 +0800'
	export _id='593becca0b9a935ec5b18d35'
	export _rt='/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63'
	export user='lkp'
	export head_commit='c860701ee93b78891fbd3582a8914494c96bc71d'
	export base_commit='3c2993b8c6143d8a5793746a54eba8f86f95240f'
	export branch='linux-devel/devel-hourly-2017060904'
	export result_root='/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/10'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.2
branch=linux-devel/devel-hourly-2017060904
commit=4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c
max_uptime=1500
RESULT_ROOT=/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/10
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_6
 4-2016-08-31.cgz/cluster_2016-11-24.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export repeat_to=24
	export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c'
	export dequeue_time='2017-06-10 22:55:27 +0800'
	export node_roles='server client'
	export job_initrd='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper iostat
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
	run_monitor $LKP_SRC/monitors/wrapper proc-stat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper slabinfo
	run_monitor $LKP_SRC/monitors/wrapper interrupts
	run_monitor $LKP_SRC/monitors/wrapper lock_stat
	run_monitor $LKP_SRC/monitors/wrapper latency_stats
	run_monitor $LKP_SRC/monitors/wrapper softirqs
	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
	run_monitor $LKP_SRC/monitors/wrapper diskstats
	run_monitor $LKP_SRC/monitors/wrapper nfsstat
	run_monitor $LKP_SRC/monitors/wrapper cpuidle
	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
	run_monitor $LKP_SRC/monitors/wrapper turbostat
	run_monitor $LKP_SRC/monitors/wrapper sched_debug
	run_monitor $LKP_SRC/monitors/wrapper perf-stat
	run_monitor $LKP_SRC/monitors/wrapper mpstat
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	if role server
	then
		start_daemon $LKP_SRC/daemon/netserver
	fi

	if role client
	then
		run_test test='TCP_CRR' $LKP_SRC/tests/wrapper netperf
	fi
}

extract_stats()
{
	$LKP_SRC/stats/wrapper netperf
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper iostat
	$LKP_SRC/stats/wrapper vmstat
	$LKP_SRC/stats/wrapper numa-numastat
	$LKP_SRC/stats/wrapper numa-vmstat
	$LKP_SRC/stats/wrapper numa-meminfo
	$LKP_SRC/stats/wrapper proc-vmstat
	$LKP_SRC/stats/wrapper meminfo
	$LKP_SRC/stats/wrapper slabinfo
	$LKP_SRC/stats/wrapper interrupts
	$LKP_SRC/stats/wrapper lock_stat
	$LKP_SRC/stats/wrapper latency_stats
	$LKP_SRC/stats/wrapper softirqs
	$LKP_SRC/stats/wrapper diskstats
	$LKP_SRC/stats/wrapper nfsstat
	$LKP_SRC/stats/wrapper cpuidle
	$LKP_SRC/stats/wrapper turbostat
	$LKP_SRC/stats/wrapper sched_debug
	$LKP_SRC/stats/wrapper perf-stat
	$LKP_SRC/stats/wrapper mpstat
	$LKP_SRC/stats/wrapper perf-profile

	$LKP_SRC/stats/wrapper time netperf.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 43988 bytes --]

[-- Attachment #5: netperf --]
[-- Type: text/plain, Size: 4185 bytes --]

2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 wait
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4271.85   99.53  99.67  931.973  933.242
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4195.76   99.53  99.67  948.873  950.166
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4231.66   99.53  99.67  940.823  942.104
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4237.06   99.53  99.66  939.623  940.857
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4186.99   99.53  99.66  950.862  952.109
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4211.99   99.53  99.66  945.217  946.457
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4148.48   99.53  99.66  959.679  960.946
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4237.97   99.52  99.65  939.352  940.584
16384  87380 

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 4656 bytes --]

---

#! jobs/netperf.yaml
suite: netperf
testcase: netperf
category: benchmark

# upto 90% CPU cycles may be used by latency stats
disable_latency_stats: 1
set_nic_irq_affinity: 1
ip: ipv4
runtime: 300s
nr_threads: 200%
cluster: cs-localhost
if role server:
  netserver: 
if role client:
  netperf:
    test: TCP_CRR
job_origin: "/lkp/lkp/.src-20170608-214239/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml"

#! queue options
queue: bisect
testbox: lkp-u410
tbox_group: lkp-u410
submit_id: 593bd4cc0b9a9381371b68e1
job_file: "/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-33079-thjtts-0.yaml"
id: 44078daf2e17f0327267a151c652f7f92f839dbe

#! hosts/lkp-u410
model: Ivy Bridge
nr_cpu: 4
memory: 4G
nr_hdd_partitions: 0
hdd_partitions: 
netconsole_port: 6674
brand: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz

#! include/category/benchmark
kmsg: 
iostat: 
heartbeat: 
vmstat: 
numa-numastat: 
numa-vmstat: 
numa-meminfo: 
proc-vmstat: 
proc-stat: 
meminfo: 
slabinfo: 
interrupts: 
lock_stat: 
latency_stats: 
softirqs: 
bdi_dev_mapping: 
diskstats: 
nfsstat: 
cpuidle: 
cpufreq-stats: 
turbostat: 
sched_debug: 
perf-stat: 
mpstat: 
perf-profile: 

#! include/category/ALL
cpufreq_governor: performance

#! include/queue/cyclic
commit: 4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63

#! default params
kconfig: x86_64-rhel-7.2
compiler: gcc-6
rootfs: debian-x86_64-2016-08-31.cgz
enqueue_time: 2017-06-10 19:15:26.023843117 +08:00
_id: 593bd4cc0b9a9381371b68e1
_rt: "/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63"

#! schedule options
user: lkp
head_commit: c860701ee93b78891fbd3582a8914494c96bc71d
base_commit: 3c2993b8c6143d8a5793746a54eba8f86f95240f
branch: linux-devel/devel-hourly-2017060904
result_root: "/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/0"
LKP_SERVER: inn
max_uptime: 1500
initrd: "/osimage/debian/debian-x86_64-2016-08-31.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-33079-thjtts-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-7.2
- branch=linux-devel/devel-hourly-2017060904
- commit=4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c
- max_uptime=1500
- RESULT_ROOT=/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/0
- LKP_SERVER=inn
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- console=tty0
- vga=normal
- rw
lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz"
modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/modules.cgz"
bm_initrd: "/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-
 08-31.cgz/cluster_2016-11-24.cgz"
site: inn

#! /lkp/lkp/.src-20170608-214239/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 
nfs-hang: 

#! runtime status

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c"
dequeue_time: 2017-06-10 19:40:17.573159215 +08:00

#! /lkp/lkp/.src-20170609-211823/include/site/inn
job_state: booting

[-- Attachment #7: reproduce --]
[-- Type: text/plain, Size: 685 bytes --]


for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
	online_file="$cpu_dir"/online
	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue

	file="$cpu_dir"/cpufreq/scaling_governor
	[ -f "$file" ] && echo "$scaling_governor" > "$file"
done

netserver -4
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
wait

[-- Attachment #8: Type: text/plain, Size: 172 bytes --]

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[lkp-robot] [ACPI] 4d0c35c1af: BUG:scheduling_while_atomic

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12501 bytes --]


FYI, we noticed the following commit:

commit: 4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63 ("ACPI: button: Fix issue that button notify cannot report stateful SW_LID state")
url: https://github.com/0day-ci/linux/commits/Lv-Zheng/ACPI-button-Fix-button-lid_init_state-method-mode/20170608-210525


in testcase: netperf
with following parameters:

	ip: ipv4
	runtime: 300s
	nr_threads: 200%
	cluster: cs-localhost
	test: TCP_CRR
	cpufreq_governor: performance

test-description: Netperf is a benchmark that can be use to measure various aspect of networking performance.
test-url: http://www.netperf.org/netperf/


on test machine: 4 threads Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz with 4G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+---------------------------------------------------------------------------+----------+------------+
|                                                                           | v4.9-rc8 | 4d0c35c1af |
+---------------------------------------------------------------------------+----------+------------+
| boot_successes                                                            | 1249     | 2          |
| boot_failures                                                             | 100      | 10         |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/irq/manage.c  | 17       |            |
| calltrace:SyS_write                                                       | 8        |            |
| calltrace:init_netconsole                                                 | 9        |            |
| calltrace:SyS_finit_module                                                | 40       | 1          |
| WARNING:at_drivers/gpu/drm/i915/intel_display.c:#intel_modeset_init[i915] | 20       | 1          |
| calltrace:i915_init                                                       | 20       | 1          |
| drm:intel_set_cpu_fifo_underrun_reporting[i915]]                          | 1        |            |
| drm:intel_cpu_fifo_underrun_irq_handler[i915]]                            | 1        |            |
| drm:intel_set_pch_fifo_underrun_reporting[i915]]                          | 1        |            |
| drm:intel_pch_fifo_underrun_irq_handler[i915]]                            | 1        |            |
| WARNING:at_fs/sysfs/dir.c:#sysfs_warn_dup                                 | 11       |            |
| calltrace:parport_pc_init                                                 | 11       |            |
| WARNING:at_lib/kobject.c:#kobject_add_internal                            | 11       |            |
| invoked_oom-killer:gfp_mask=0x                                            | 27       | 2          |
| Mem-Info                                                                  | 27       | 2          |
| Kernel_panic-not_syncing:Out_of_memory_and_no_killable_processes          | 27       | 2          |
| BUG:kernel_hang_in_test_stage                                             | 11       |            |
| WARNING:at_net/mac80211/driver-ops.h:#ieee80211_set_default_key[mac80211] | 7        |            |
| calltrace:SyS_sendmsg                                                     | 7        |            |
| WARNING:at_net/mac80211/driver-ops.h:#ieee80211_key_replace[mac80211]     | 7        |            |
| BUG:kernel_hang_in_boot_stage                                             | 2        |            |
| BUG:kernel_in_stage                                                       | 11       |            |
| BUG:scheduling_while_atomic                                               | 0        | 8          |
| WARNING:at_kernel/time/timer.c:#call_timer_fn                             | 0        | 8          |
| BUG:sleeping_function_called_from_invalid_context_at_mm/slab.h            | 0        | 8          |
| calltrace:intel_lid_notify                                                | 0        | 8          |
| calltrace:SyS_sendto                                                      | 0        | 8          |
| calltrace:SyS_connect                                                     | 0        | 8          |
| calltrace:SyS_read                                                        | 0        | 4          |
| calltrace:smpboot_thread_fn                                               | 0        | 8          |
| calltrace:SyS_recvfrom                                                    | 0        | 7          |
| calltrace:SyS_accept                                                      | 0        | 5          |
| BUG:unable_to_handle_kernel                                               | 0        | 6          |
| Oops:#[##]                                                                | 0        | 6          |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt                     | 0        | 6          |
| calltrace:SyS_socket                                                      | 0        | 3          |
| WARNING:at_net/sched/sch_generic.c:#dev_watchdog                          | 0        | 1          |
| BUG:soft_lockup-CPU##stuck_for#s                                          | 0        | 2          |
| Kernel_panic-not_syncing:softlockup:hung_tasks                            | 0        | 2          |
| WARNING:at_arch/x86/kernel/smp.c:#native_smp_send_reschedule              | 0        | 1          |
| INFO:rcu_sched_detected_stalls_on_CPUs/tasks                              | 0        | 1          |
| RIP:smp_call_function_many                                                | 0        | 1          |
| calltrace:SyS_seccomp                                                     | 0        | 1          |
| calltrace:SyS_nanosleep                                                   | 0        | 1          |
| calltrace:SyS_bind                                                        | 0        | 1          |
+---------------------------------------------------------------------------+----------+------------+



[   16.440882] BUG: scheduling while atomic: swapper/2/0/0x00000102
[   16.441400] Modules linked in:
[   16.441750] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-rc8-00001-g4d0c35c #1
[   16.442346] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   16.443007]  ffff880112a837b0 ffffffff81477139 0000000000000000 ffff880112a993c0
[   16.443830]  ffff880112a837c0 ffffffff810a7d04 ffff880112a83818 ffffffff81962ed4
[   16.444651]  0000000000000422 0000000000000008 ffff880112a993c0 ffff880112a837f8
[   16.445473] Call Trace:
[   16.446670]  <IRQ> 
[   16.446857]  [<ffffffff81477139>] dump_stack+0x63/0x8a
[   16.447329]  [<ffffffff810a7d04>] __schedule_bug+0x54/0x70
[   16.447766]  [<ffffffff81962ed4>] __schedule+0x554/0x6f0
[   16.448191]  [<ffffffff819630ad>] schedule+0x3d/0x90
[   16.448594]  [<ffffffff819666f6>] schedule_timeout+0x1d6/0x3f0
[   16.449052]  [<ffffffff810f0340>] ? del_timer_sync+0x50/0x50
[   16.449501]  [<ffffffff810c634f>] ? prepare_to_wait_event+0x7f/0x100
[   16.449989]  [<ffffffff81506972>] ec_guard+0x173/0x1b1
[   16.450405]  [<ffffffff810c63d0>] ? prepare_to_wait_event+0x100/0x100
[   16.450897]  [<ffffffff81507956>] acpi_ec_transaction+0x13f/0x2f2
[   16.451369]  [<ffffffff81507b56>] acpi_ec_read+0x4d/0x59
[   16.451794]  [<ffffffff81507cb9>] acpi_ec_space_handler+0xce/0x183
[   16.452271]  [<ffffffff814fdb35>] ? acpi_os_signal_semaphore+0x74/0x84
[   16.452771]  [<ffffffff81542030>] ? acpi_ut_release_mutex+0x11c/0x127
[   16.453264]  [<ffffffff8151b2b3>] acpi_ev_address_space_dispatch+0x2ce/0x33a
[   16.453792]  [<ffffffff81507beb>] ? ec_transaction+0x4f/0x4f
[   16.454239]  [<ffffffff81522ef6>] acpi_ex_access_region+0x414/0x4ca
[   16.454719]  [<ffffffff810a81da>] ? __might_sleep+0x4a/0x80
[   16.455159]  [<ffffffff81523386>] acpi_ex_field_datum_io+0x178/0x3fa
[   16.455647]  [<ffffffff8152392c>] acpi_ex_extract_from_field+0x151/0x2bb
[   16.456157]  [<ffffffff81522592>] acpi_ex_read_data_from_field+0x380/0x3d0
[   16.456676]  [<ffffffff815279f2>] acpi_ex_resolve_node_to_value+0x326/0x443
[   16.457202]  [<ffffffff81527e83>] acpi_ex_resolve_to_value+0x374/0x40e
[   16.457700]  [<ffffffff81515151>] acpi_ds_evaluate_name_path+0xa3/0x143
[   16.458204]  [<ffffffff815157c0>] acpi_ds_exec_end_op+0xd1/0x6c6
[   16.458670]  [<ffffffff815365c5>] acpi_ps_parse_loop+0x7d7/0x873
[   16.459137]  [<ffffffff8153f1f3>] ? acpi_ut_trace+0x26/0x66
[   16.459579]  [<ffffffff8153786c>] acpi_ps_parse_aml+0x1ac/0x4a1
[   16.460041]  [<ffffffff81538526>] acpi_ps_execute_method+0x1f4/0x2b6
[   16.460529]  [<ffffffff8152f567>] acpi_ns_evaluate+0x2ee/0x435
[   16.460985]  [<ffffffff81534209>] acpi_evaluate_object+0x178/0x38e
[   16.461463]  [<ffffffff814fe210>] acpi_evaluate_integer+0x44/0xca
[   16.461934]  [<ffffffff810aba12>] ? check_preempt_curr+0x52/0x90
[   16.462403]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.462880]  [<ffffffff81544b04>] acpi_lid_evaluate_state+0x1c/0x33
[   16.463401]  [<ffffffff815451f9>] acpi_lid_update_state+0x16/0x27
[   16.463875]  [<ffffffff8154535d>] acpi_lid_timeout+0x20/0x37
[   16.464320]  [<ffffffff810f0385>] call_timer_fn+0x35/0x130
[   16.464756]  [<ffffffff810f0962>] run_timer_softirq+0x222/0x4e0
[   16.465218]  [<ffffffff810f8c01>] ? ktime_get+0x41/0xb0
[   16.465640]  [<ffffffff81053256>] ? lapic_next_deadline+0x26/0x30
[   16.466112]  [<ffffffff8196af74>] __do_softirq+0x104/0x2ab
[   16.466550]  [<ffffffff810869c1>] irq_exit+0xf1/0x100
[   16.466959]  [<ffffffff8196ad72>] smp_apic_timer_interrupt+0x42/0x50
[   16.467446]  [<ffffffff81969f2c>] apic_timer_interrupt+0x8c/0xa0
[   16.467908]  <EOI> 
[   16.468089]  [<ffffffff817d3b12>] ? cpuidle_enter_state+0x122/0x2e0
[   16.468669]  [<ffffffff817d3d07>] cpuidle_enter+0x17/0x20
[   16.469099]  [<ffffffff810c6983>] call_cpuidle+0x23/0x40
[   16.469525]  [<ffffffff810c6bb4>] cpu_startup_entry+0x114/0x200
[   16.469988]  [<ffffffff81051d57>] start_secondary+0x107/0x130
[   16.470515] ACPI : button: The lid device is not compliant to SW_LID.
[   16.471013] ------------[ cut here ]------------
[   16.471397] WARNING: CPU: 2 PID: 0 at kernel/time/timer.c:1315 call_timer_fn+0x128/0x130
[   16.472117] timer: acpi_lid_timeout+0x0/0x37 preempt leak: 00000101 -> 00000000
[   16.472699] Modules linked in:
[   16.473046] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G        W       4.9.0-rc8-00001-g4d0c35c #1
[   16.473713] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   16.474368]  ffff880112a83de8 ffffffff81477139 ffff880112a83e38 0000000000000000
[   16.475191]  ffff880112a83e28 ffffffff810803db 0000052300000246 0000000000000001
[   16.476013]  ffff8800b4f0b190 0000000000000101 ffffffff8154533d ffff88010d4e5800
[   16.476835] Call Trace:
[   16.477082]  <IRQ> 
[   16.477262]  [<ffffffff81477139>] dump_stack+0x63/0x8a
[   16.477734]  [<ffffffff810803db>] __warn+0xcb/0xf0
[   16.478128]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.478603]  [<ffffffff8108044f>] warn_slowpath_fmt+0x4f/0x60
[   16.479054]  [<ffffffff81544a59>] ? acpi_lid_tick+0x2f/0x32
[   16.479494]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.479970]  [<ffffffff810f0478>] call_timer_fn+0x128/0x130
[   16.480410]  [<ffffffff810f0962>] run_timer_softirq+0x222/0x4e0
[   16.480871]  [<ffffffff810f8c01>] ? ktime_get+0x41/0xb0
[   16.481290]  [<ffffffff81053256>] ? lapic_next_deadline+0x26/0x30
[   16.481763]  [<ffffffff8196af74>] __do_softirq+0x104/0x2ab
[   16.482199]  [<ffffffff810869c1>] irq_exit+0xf1/0x100
[   16.482607]  [<ffffffff8196ad72>] smp_apic_timer_interrupt+0x42/0x50
[   16.483093]  [<ffffffff81969f2c>] apic_timer_interrupt+0x8c/0xa0
[   16.483555]  <EOI> 
[   16.483734]  [<ffffffff817d3b12>] ? cpuidle_enter_state+0x122/0x2e0
[   16.484313]  [<ffffffff817d3d07>] cpuidle_enter+0x17/0x20
[   16.484745]  [<ffffffff810c6983>] call_cpuidle+0x23/0x40
[   16.485169]  [<ffffffff810c6bb4>] cpu_startup_entry+0x114/0x200
[   16.485630]  [<ffffffff81051d57>] start_secondary+0x107/0x130
[   16.486081] ---[ end trace 1414925b5a440cdd ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Xiaolong

[-- Attachment #2: config-4.9.0-rc8-00001-g4d0c35c --]
[-- Type: text/plain, Size: 154152 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.9.0-rc8 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_MLX_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
# CONFIG_ACPI_NFIT_DEBUG is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
# CONFIG_VMD is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_RAM_DAX is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PANEL is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_CACHE_CLEANER=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
# CONFIG_I40E_FCOE is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
# CONFIG_MVNETA_BM is not set
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP_NETVF is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y

#
# MDIO bus device drivers
#
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=m
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_ZX is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_LEGACY is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
# CONFIG_EDAC_SKX is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set

#
# Old ISDN4Linux (deprecated)
#
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_MEMTEST is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 7171 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='netperf'
	export testcase='netperf'
	export category='benchmark'
	export disable_latency_stats=1
	export set_nic_irq_affinity=1
	export ip='ipv4'
	export runtime=300
	export nr_threads=8
	export cluster='cs-localhost'
	export job_origin='/lkp/lkp/.src-20170608-214239/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml'
	export queue='validate'
	export testbox='lkp-u410'
	export tbox_group='lkp-u410'
	export submit_id='593becca0b9a935ec5b18d2e'
	export job_file='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.yaml'
	export id='d6b02f453070f9a11e33ab3c79ad16db8032eac9'
	export model='Ivy Bridge'
	export nr_cpu=4
	export memory='4G'
	export nr_hdd_partitions=0
	export hdd_partitions=
	export netconsole_port=6674
	export brand='Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'
	export commit='4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63'
	export kconfig='x86_64-rhel-7.2'
	export compiler='gcc-6'
	export rootfs='debian-x86_64-2016-08-31.cgz'
	export enqueue_time='2017-06-10 20:57:46 +0800'
	export _id='593becca0b9a935ec5b18d35'
	export _rt='/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63'
	export user='lkp'
	export head_commit='c860701ee93b78891fbd3582a8914494c96bc71d'
	export base_commit='3c2993b8c6143d8a5793746a54eba8f86f95240f'
	export branch='linux-devel/devel-hourly-2017060904'
	export result_root='/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/10'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.2
branch=linux-devel/devel-hourly-2017060904
commit=4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c
max_uptime=1500
RESULT_ROOT=/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/10
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export repeat_to=24
	export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c'
	export dequeue_time='2017-06-10 22:55:27 +0800'
	export node_roles='server client'
	export job_initrd='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper iostat
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
	run_monitor $LKP_SRC/monitors/wrapper proc-stat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper slabinfo
	run_monitor $LKP_SRC/monitors/wrapper interrupts
	run_monitor $LKP_SRC/monitors/wrapper lock_stat
	run_monitor $LKP_SRC/monitors/wrapper latency_stats
	run_monitor $LKP_SRC/monitors/wrapper softirqs
	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
	run_monitor $LKP_SRC/monitors/wrapper diskstats
	run_monitor $LKP_SRC/monitors/wrapper nfsstat
	run_monitor $LKP_SRC/monitors/wrapper cpuidle
	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
	run_monitor $LKP_SRC/monitors/wrapper turbostat
	run_monitor $LKP_SRC/monitors/wrapper sched_debug
	run_monitor $LKP_SRC/monitors/wrapper perf-stat
	run_monitor $LKP_SRC/monitors/wrapper mpstat
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	if role server
	then
		start_daemon $LKP_SRC/daemon/netserver
	fi

	if role client
	then
		run_test test='TCP_CRR' $LKP_SRC/tests/wrapper netperf
	fi
}

extract_stats()
{
	$LKP_SRC/stats/wrapper netperf
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper iostat
	$LKP_SRC/stats/wrapper vmstat
	$LKP_SRC/stats/wrapper numa-numastat
	$LKP_SRC/stats/wrapper numa-vmstat
	$LKP_SRC/stats/wrapper numa-meminfo
	$LKP_SRC/stats/wrapper proc-vmstat
	$LKP_SRC/stats/wrapper meminfo
	$LKP_SRC/stats/wrapper slabinfo
	$LKP_SRC/stats/wrapper interrupts
	$LKP_SRC/stats/wrapper lock_stat
	$LKP_SRC/stats/wrapper latency_stats
	$LKP_SRC/stats/wrapper softirqs
	$LKP_SRC/stats/wrapper diskstats
	$LKP_SRC/stats/wrapper nfsstat
	$LKP_SRC/stats/wrapper cpuidle
	$LKP_SRC/stats/wrapper turbostat
	$LKP_SRC/stats/wrapper sched_debug
	$LKP_SRC/stats/wrapper perf-stat
	$LKP_SRC/stats/wrapper mpstat
	$LKP_SRC/stats/wrapper perf-profile

	$LKP_SRC/stats/wrapper time netperf.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 43988 bytes --]

[-- Attachment #5: netperf.ksh --]
[-- Type: text/plain, Size: 4185 bytes --]

2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 wait
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4271.85   99.53  99.67  931.973  933.242
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4195.76   99.53  99.67  948.873  950.166
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4231.66   99.53  99.67  940.823  942.104
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4237.06   99.53  99.66  939.623  940.857
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4186.99   99.53  99.66  950.862  952.109
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4211.99   99.53  99.66  945.217  946.457
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4148.48   99.53  99.66  959.679  960.946
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4237.97   99.52  99.65  939.352  940.584
16384  87380 

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 4654 bytes --]

---

#! jobs/netperf.yaml
suite: netperf
testcase: netperf
category: benchmark

# upto 90% CPU cycles may be used by latency stats
disable_latency_stats: 1
set_nic_irq_affinity: 1
ip: ipv4
runtime: 300s
nr_threads: 200%
cluster: cs-localhost
if role server:
  netserver: 
if role client:
  netperf:
    test: TCP_CRR
job_origin: "/lkp/lkp/.src-20170608-214239/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml"

#! queue options
queue: bisect
testbox: lkp-u410
tbox_group: lkp-u410
submit_id: 593bd4cc0b9a9381371b68e1
job_file: "/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-33079-thjtts-0.yaml"
id: 44078daf2e17f0327267a151c652f7f92f839dbe

#! hosts/lkp-u410
model: Ivy Bridge
nr_cpu: 4
memory: 4G
nr_hdd_partitions: 0
hdd_partitions: 
netconsole_port: 6674
brand: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz

#! include/category/benchmark
kmsg: 
iostat: 
heartbeat: 
vmstat: 
numa-numastat: 
numa-vmstat: 
numa-meminfo: 
proc-vmstat: 
proc-stat: 
meminfo: 
slabinfo: 
interrupts: 
lock_stat: 
latency_stats: 
softirqs: 
bdi_dev_mapping: 
diskstats: 
nfsstat: 
cpuidle: 
cpufreq-stats: 
turbostat: 
sched_debug: 
perf-stat: 
mpstat: 
perf-profile: 

#! include/category/ALL
cpufreq_governor: performance

#! include/queue/cyclic
commit: 4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63

#! default params
kconfig: x86_64-rhel-7.2
compiler: gcc-6
rootfs: debian-x86_64-2016-08-31.cgz
enqueue_time: 2017-06-10 19:15:26.023843117 +08:00
_id: 593bd4cc0b9a9381371b68e1
_rt: "/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63"

#! schedule options
user: lkp
head_commit: c860701ee93b78891fbd3582a8914494c96bc71d
base_commit: 3c2993b8c6143d8a5793746a54eba8f86f95240f
branch: linux-devel/devel-hourly-2017060904
result_root: "/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/0"
LKP_SERVER: inn
max_uptime: 1500
initrd: "/osimage/debian/debian-x86_64-2016-08-31.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-33079-thjtts-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-7.2
- branch=linux-devel/devel-hourly-2017060904
- commit=4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c
- max_uptime=1500
- RESULT_ROOT=/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/0
- LKP_SERVER=inn
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- console=tty0
- vga=normal
- rw
lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz"
modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/modules.cgz"
bm_initrd: "/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz"
site: inn

#! /lkp/lkp/.src-20170608-214239/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 
nfs-hang: 

#! runtime status

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c"
dequeue_time: 2017-06-10 19:40:17.573159215 +08:00

#! /lkp/lkp/.src-20170609-211823/include/site/inn
job_state: booting

[-- Attachment #7: reproduce.ksh --]
[-- Type: text/plain, Size: 685 bytes --]


for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
	online_file="$cpu_dir"/online
	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue

	file="$cpu_dir"/cpufreq/scaling_governor
	[ -f "$file" ] && echo "$scaling_governor" > "$file"
done

netserver -4
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
wait

[lkp-robot] [ACPI] 4d0c35c1af: BUG:scheduling_while_atomic

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12315 bytes --]


FYI, we noticed the following commit:

commit: 4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63 ("ACPI: button: Fix issue that button notify cannot report stateful SW_LID state")
url: https://github.com/0day-ci/linux/commits/Lv-Zheng/ACPI-button-Fix-button-lid_init_state-method-mode/20170608-210525


in testcase: netperf
with following parameters:

	ip: ipv4
	runtime: 300s
	nr_threads: 200%
	cluster: cs-localhost
	test: TCP_CRR
	cpufreq_governor: performance

test-description: Netperf is a benchmark that can be use to measure various aspect of networking performance.
test-url: http://www.netperf.org/netperf/


on test machine: 4 threads Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz with 4G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+---------------------------------------------------------------------------+----------+------------+
|                                                                           | v4.9-rc8 | 4d0c35c1af |
+---------------------------------------------------------------------------+----------+------------+
| boot_successes                                                            | 1249     | 2          |
| boot_failures                                                             | 100      | 10         |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/irq/manage.c  | 17       |            |
| calltrace:SyS_write                                                       | 8        |            |
| calltrace:init_netconsole                                                 | 9        |            |
| calltrace:SyS_finit_module                                                | 40       | 1          |
| WARNING:at_drivers/gpu/drm/i915/intel_display.c:#intel_modeset_init[i915] | 20       | 1          |
| calltrace:i915_init                                                       | 20       | 1          |
| drm:intel_set_cpu_fifo_underrun_reporting[i915]]                          | 1        |            |
| drm:intel_cpu_fifo_underrun_irq_handler[i915]]                            | 1        |            |
| drm:intel_set_pch_fifo_underrun_reporting[i915]]                          | 1        |            |
| drm:intel_pch_fifo_underrun_irq_handler[i915]]                            | 1        |            |
| WARNING:at_fs/sysfs/dir.c:#sysfs_warn_dup                                 | 11       |            |
| calltrace:parport_pc_init                                                 | 11       |            |
| WARNING:at_lib/kobject.c:#kobject_add_internal                            | 11       |            |
| invoked_oom-killer:gfp_mask=0x                                            | 27       | 2          |
| Mem-Info                                                                  | 27       | 2          |
| Kernel_panic-not_syncing:Out_of_memory_and_no_killable_processes          | 27       | 2          |
| BUG:kernel_hang_in_test_stage                                             | 11       |            |
| WARNING:at_net/mac80211/driver-ops.h:#ieee80211_set_default_key[mac80211] | 7        |            |
| calltrace:SyS_sendmsg                                                     | 7        |            |
| WARNING:at_net/mac80211/driver-ops.h:#ieee80211_key_replace[mac80211]     | 7        |            |
| BUG:kernel_hang_in_boot_stage                                             | 2        |            |
| BUG:kernel_in_stage                                                       | 11       |            |
| BUG:scheduling_while_atomic                                               | 0        | 8          |
| WARNING:at_kernel/time/timer.c:#call_timer_fn                             | 0        | 8          |
| BUG:sleeping_function_called_from_invalid_context_at_mm/slab.h            | 0        | 8          |
| calltrace:intel_lid_notify                                                | 0        | 8          |
| calltrace:SyS_sendto                                                      | 0        | 8          |
| calltrace:SyS_connect                                                     | 0        | 8          |
| calltrace:SyS_read                                                        | 0        | 4          |
| calltrace:smpboot_thread_fn                                               | 0        | 8          |
| calltrace:SyS_recvfrom                                                    | 0        | 7          |
| calltrace:SyS_accept                                                      | 0        | 5          |
| BUG:unable_to_handle_kernel                                               | 0        | 6          |
| Oops:#[##]                                                                | 0        | 6          |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt                     | 0        | 6          |
| calltrace:SyS_socket                                                      | 0        | 3          |
| WARNING:at_net/sched/sch_generic.c:#dev_watchdog                          | 0        | 1          |
| BUG:soft_lockup-CPU##stuck_for#s                                          | 0        | 2          |
| Kernel_panic-not_syncing:softlockup:hung_tasks                            | 0        | 2          |
| WARNING:at_arch/x86/kernel/smp.c:#native_smp_send_reschedule              | 0        | 1          |
| INFO:rcu_sched_detected_stalls_on_CPUs/tasks                              | 0        | 1          |
| RIP:smp_call_function_many                                                | 0        | 1          |
| calltrace:SyS_seccomp                                                     | 0        | 1          |
| calltrace:SyS_nanosleep                                                   | 0        | 1          |
| calltrace:SyS_bind                                                        | 0        | 1          |
+---------------------------------------------------------------------------+----------+------------+



[   16.440882] BUG: scheduling while atomic: swapper/2/0/0x00000102
[   16.441400] Modules linked in:
[   16.441750] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-rc8-00001-g4d0c35c #1
[   16.442346] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   16.443007]  ffff880112a837b0 ffffffff81477139 0000000000000000 ffff880112a993c0
[   16.443830]  ffff880112a837c0 ffffffff810a7d04 ffff880112a83818 ffffffff81962ed4
[   16.444651]  0000000000000422 0000000000000008 ffff880112a993c0 ffff880112a837f8
[   16.445473] Call Trace:
[   16.446670]  <IRQ> 
[   16.446857]  [<ffffffff81477139>] dump_stack+0x63/0x8a
[   16.447329]  [<ffffffff810a7d04>] __schedule_bug+0x54/0x70
[   16.447766]  [<ffffffff81962ed4>] __schedule+0x554/0x6f0
[   16.448191]  [<ffffffff819630ad>] schedule+0x3d/0x90
[   16.448594]  [<ffffffff819666f6>] schedule_timeout+0x1d6/0x3f0
[   16.449052]  [<ffffffff810f0340>] ? del_timer_sync+0x50/0x50
[   16.449501]  [<ffffffff810c634f>] ? prepare_to_wait_event+0x7f/0x100
[   16.449989]  [<ffffffff81506972>] ec_guard+0x173/0x1b1
[   16.450405]  [<ffffffff810c63d0>] ? prepare_to_wait_event+0x100/0x100
[   16.450897]  [<ffffffff81507956>] acpi_ec_transaction+0x13f/0x2f2
[   16.451369]  [<ffffffff81507b56>] acpi_ec_read+0x4d/0x59
[   16.451794]  [<ffffffff81507cb9>] acpi_ec_space_handler+0xce/0x183
[   16.452271]  [<ffffffff814fdb35>] ? acpi_os_signal_semaphore+0x74/0x84
[   16.452771]  [<ffffffff81542030>] ? acpi_ut_release_mutex+0x11c/0x127
[   16.453264]  [<ffffffff8151b2b3>] acpi_ev_address_space_dispatch+0x2ce/0x33a
[   16.453792]  [<ffffffff81507beb>] ? ec_transaction+0x4f/0x4f
[   16.454239]  [<ffffffff81522ef6>] acpi_ex_access_region+0x414/0x4ca
[   16.454719]  [<ffffffff810a81da>] ? __might_sleep+0x4a/0x80
[   16.455159]  [<ffffffff81523386>] acpi_ex_field_datum_io+0x178/0x3fa
[   16.455647]  [<ffffffff8152392c>] acpi_ex_extract_from_field+0x151/0x2bb
[   16.456157]  [<ffffffff81522592>] acpi_ex_read_data_from_field+0x380/0x3d0
[   16.456676]  [<ffffffff815279f2>] acpi_ex_resolve_node_to_value+0x326/0x443
[   16.457202]  [<ffffffff81527e83>] acpi_ex_resolve_to_value+0x374/0x40e
[   16.457700]  [<ffffffff81515151>] acpi_ds_evaluate_name_path+0xa3/0x143
[   16.458204]  [<ffffffff815157c0>] acpi_ds_exec_end_op+0xd1/0x6c6
[   16.458670]  [<ffffffff815365c5>] acpi_ps_parse_loop+0x7d7/0x873
[   16.459137]  [<ffffffff8153f1f3>] ? acpi_ut_trace+0x26/0x66
[   16.459579]  [<ffffffff8153786c>] acpi_ps_parse_aml+0x1ac/0x4a1
[   16.460041]  [<ffffffff81538526>] acpi_ps_execute_method+0x1f4/0x2b6
[   16.460529]  [<ffffffff8152f567>] acpi_ns_evaluate+0x2ee/0x435
[   16.460985]  [<ffffffff81534209>] acpi_evaluate_object+0x178/0x38e
[   16.461463]  [<ffffffff814fe210>] acpi_evaluate_integer+0x44/0xca
[   16.461934]  [<ffffffff810aba12>] ? check_preempt_curr+0x52/0x90
[   16.462403]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.462880]  [<ffffffff81544b04>] acpi_lid_evaluate_state+0x1c/0x33
[   16.463401]  [<ffffffff815451f9>] acpi_lid_update_state+0x16/0x27
[   16.463875]  [<ffffffff8154535d>] acpi_lid_timeout+0x20/0x37
[   16.464320]  [<ffffffff810f0385>] call_timer_fn+0x35/0x130
[   16.464756]  [<ffffffff810f0962>] run_timer_softirq+0x222/0x4e0
[   16.465218]  [<ffffffff810f8c01>] ? ktime_get+0x41/0xb0
[   16.465640]  [<ffffffff81053256>] ? lapic_next_deadline+0x26/0x30
[   16.466112]  [<ffffffff8196af74>] __do_softirq+0x104/0x2ab
[   16.466550]  [<ffffffff810869c1>] irq_exit+0xf1/0x100
[   16.466959]  [<ffffffff8196ad72>] smp_apic_timer_interrupt+0x42/0x50
[   16.467446]  [<ffffffff81969f2c>] apic_timer_interrupt+0x8c/0xa0
[   16.467908]  <EOI> 
[   16.468089]  [<ffffffff817d3b12>] ? cpuidle_enter_state+0x122/0x2e0
[   16.468669]  [<ffffffff817d3d07>] cpuidle_enter+0x17/0x20
[   16.469099]  [<ffffffff810c6983>] call_cpuidle+0x23/0x40
[   16.469525]  [<ffffffff810c6bb4>] cpu_startup_entry+0x114/0x200
[   16.469988]  [<ffffffff81051d57>] start_secondary+0x107/0x130
[   16.470515] ACPI : button: The lid device is not compliant to SW_LID.
[   16.471013] ------------[ cut here ]------------
[   16.471397] WARNING: CPU: 2 PID: 0 at kernel/time/timer.c:1315 call_timer_fn+0x128/0x130
[   16.472117] timer: acpi_lid_timeout+0x0/0x37 preempt leak: 00000101 -> 00000000
[   16.472699] Modules linked in:
[   16.473046] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G        W       4.9.0-rc8-00001-g4d0c35c #1
[   16.473713] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   16.474368]  ffff880112a83de8 ffffffff81477139 ffff880112a83e38 0000000000000000
[   16.475191]  ffff880112a83e28 ffffffff810803db 0000052300000246 0000000000000001
[   16.476013]  ffff8800b4f0b190 0000000000000101 ffffffff8154533d ffff88010d4e5800
[   16.476835] Call Trace:
[   16.477082]  <IRQ> 
[   16.477262]  [<ffffffff81477139>] dump_stack+0x63/0x8a
[   16.477734]  [<ffffffff810803db>] __warn+0xcb/0xf0
[   16.478128]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.478603]  [<ffffffff8108044f>] warn_slowpath_fmt+0x4f/0x60
[   16.479054]  [<ffffffff81544a59>] ? acpi_lid_tick+0x2f/0x32
[   16.479494]  [<ffffffff8154533d>] ? acpi_button_notify+0x133/0x133
[   16.479970]  [<ffffffff810f0478>] call_timer_fn+0x128/0x130
[   16.480410]  [<ffffffff810f0962>] run_timer_softirq+0x222/0x4e0
[   16.480871]  [<ffffffff810f8c01>] ? ktime_get+0x41/0xb0
[   16.481290]  [<ffffffff81053256>] ? lapic_next_deadline+0x26/0x30
[   16.481763]  [<ffffffff8196af74>] __do_softirq+0x104/0x2ab
[   16.482199]  [<ffffffff810869c1>] irq_exit+0xf1/0x100
[   16.482607]  [<ffffffff8196ad72>] smp_apic_timer_interrupt+0x42/0x50
[   16.483093]  [<ffffffff81969f2c>] apic_timer_interrupt+0x8c/0xa0
[   16.483555]  <EOI> 
[   16.483734]  [<ffffffff817d3b12>] ? cpuidle_enter_state+0x122/0x2e0
[   16.484313]  [<ffffffff817d3d07>] cpuidle_enter+0x17/0x20
[   16.484745]  [<ffffffff810c6983>] call_cpuidle+0x23/0x40
[   16.485169]  [<ffffffff810c6bb4>] cpu_startup_entry+0x114/0x200
[   16.485630]  [<ffffffff81051d57>] start_secondary+0x107/0x130
[   16.486081] ---[ end trace 1414925b5a440cdd ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Xiaolong

[-- Attachment #2: config-4.9.0-rc8-00001-g4d0c35c --]
[-- Type: text/plain, Size: 154152 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.9.0-rc8 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_MLX_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
# CONFIG_ACPI_NFIT_DEBUG is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
# CONFIG_VMD is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_RAM_DAX is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PANEL is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_CACHE_CLEANER=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
# CONFIG_I40E_FCOE is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
# CONFIG_MVNETA_BM is not set
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP_NETVF is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y

#
# MDIO bus device drivers
#
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=m
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_ZX is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_LEGACY is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
# CONFIG_EDAC_SKX is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set

#
# Old ISDN4Linux (deprecated)
#
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_MEMTEST is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 7171 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='netperf'
	export testcase='netperf'
	export category='benchmark'
	export disable_latency_stats=1
	export set_nic_irq_affinity=1
	export ip='ipv4'
	export runtime=300
	export nr_threads=8
	export cluster='cs-localhost'
	export job_origin='/lkp/lkp/.src-20170608-214239/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml'
	export queue='validate'
	export testbox='lkp-u410'
	export tbox_group='lkp-u410'
	export submit_id='593becca0b9a935ec5b18d2e'
	export job_file='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.yaml'
	export id='d6b02f453070f9a11e33ab3c79ad16db8032eac9'
	export model='Ivy Bridge'
	export nr_cpu=4
	export memory='4G'
	export nr_hdd_partitions=0
	export hdd_partitions=
	export netconsole_port=6674
	export brand='Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'
	export commit='4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63'
	export kconfig='x86_64-rhel-7.2'
	export compiler='gcc-6'
	export rootfs='debian-x86_64-2016-08-31.cgz'
	export enqueue_time='2017-06-10 20:57:46 +0800'
	export _id='593becca0b9a935ec5b18d35'
	export _rt='/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63'
	export user='lkp'
	export head_commit='c860701ee93b78891fbd3582a8914494c96bc71d'
	export base_commit='3c2993b8c6143d8a5793746a54eba8f86f95240f'
	export branch='linux-devel/devel-hourly-2017060904'
	export result_root='/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/10'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.2
branch=linux-devel/devel-hourly-2017060904
commit=4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c
max_uptime=1500
RESULT_ROOT=/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/10
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export repeat_to=24
	export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c'
	export dequeue_time='2017-06-10 22:55:27 +0800'
	export node_roles='server client'
	export job_initrd='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-89797-1487uwg-10.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper iostat
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
	run_monitor $LKP_SRC/monitors/wrapper proc-stat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper slabinfo
	run_monitor $LKP_SRC/monitors/wrapper interrupts
	run_monitor $LKP_SRC/monitors/wrapper lock_stat
	run_monitor $LKP_SRC/monitors/wrapper latency_stats
	run_monitor $LKP_SRC/monitors/wrapper softirqs
	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
	run_monitor $LKP_SRC/monitors/wrapper diskstats
	run_monitor $LKP_SRC/monitors/wrapper nfsstat
	run_monitor $LKP_SRC/monitors/wrapper cpuidle
	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
	run_monitor $LKP_SRC/monitors/wrapper turbostat
	run_monitor $LKP_SRC/monitors/wrapper sched_debug
	run_monitor $LKP_SRC/monitors/wrapper perf-stat
	run_monitor $LKP_SRC/monitors/wrapper mpstat
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	if role server
	then
		start_daemon $LKP_SRC/daemon/netserver
	fi

	if role client
	then
		run_test test='TCP_CRR' $LKP_SRC/tests/wrapper netperf
	fi
}

extract_stats()
{
	$LKP_SRC/stats/wrapper netperf
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper iostat
	$LKP_SRC/stats/wrapper vmstat
	$LKP_SRC/stats/wrapper numa-numastat
	$LKP_SRC/stats/wrapper numa-vmstat
	$LKP_SRC/stats/wrapper numa-meminfo
	$LKP_SRC/stats/wrapper proc-vmstat
	$LKP_SRC/stats/wrapper meminfo
	$LKP_SRC/stats/wrapper slabinfo
	$LKP_SRC/stats/wrapper interrupts
	$LKP_SRC/stats/wrapper lock_stat
	$LKP_SRC/stats/wrapper latency_stats
	$LKP_SRC/stats/wrapper softirqs
	$LKP_SRC/stats/wrapper diskstats
	$LKP_SRC/stats/wrapper nfsstat
	$LKP_SRC/stats/wrapper cpuidle
	$LKP_SRC/stats/wrapper turbostat
	$LKP_SRC/stats/wrapper sched_debug
	$LKP_SRC/stats/wrapper perf-stat
	$LKP_SRC/stats/wrapper mpstat
	$LKP_SRC/stats/wrapper perf-profile

	$LKP_SRC/stats/wrapper time netperf.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 43988 bytes --]

[-- Attachment #5: netperf --]
[-- Type: text/plain, Size: 4185 bytes --]

2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-10 22:57:34 wait
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4271.85   99.53  99.67  931.973  933.242
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4195.76   99.53  99.67  948.873  950.166
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4231.66   99.53  99.67  940.823  942.104
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4237.06   99.53  99.66  939.623  940.857
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4186.99   99.53  99.66  950.862  952.109
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4211.99   99.53  99.66  945.217  946.457
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4148.48   99.53  99.66  959.679  960.946
16384  87380 
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  4237.97   99.52  99.65  939.352  940.584
16384  87380 

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 4654 bytes --]

---

#! jobs/netperf.yaml
suite: netperf
testcase: netperf
category: benchmark

# upto 90% CPU cycles may be used by latency stats
disable_latency_stats: 1
set_nic_irq_affinity: 1
ip: ipv4
runtime: 300s
nr_threads: 200%
cluster: cs-localhost
if role server:
  netserver: 
if role client:
  netperf:
    test: TCP_CRR
job_origin: "/lkp/lkp/.src-20170608-214239/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml"

#! queue options
queue: bisect
testbox: lkp-u410
tbox_group: lkp-u410
submit_id: 593bd4cc0b9a9381371b68e1
job_file: "/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-33079-thjtts-0.yaml"
id: 44078daf2e17f0327267a151c652f7f92f839dbe

#! hosts/lkp-u410
model: Ivy Bridge
nr_cpu: 4
memory: 4G
nr_hdd_partitions: 0
hdd_partitions: 
netconsole_port: 6674
brand: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz

#! include/category/benchmark
kmsg: 
iostat: 
heartbeat: 
vmstat: 
numa-numastat: 
numa-vmstat: 
numa-meminfo: 
proc-vmstat: 
proc-stat: 
meminfo: 
slabinfo: 
interrupts: 
lock_stat: 
latency_stats: 
softirqs: 
bdi_dev_mapping: 
diskstats: 
nfsstat: 
cpuidle: 
cpufreq-stats: 
turbostat: 
sched_debug: 
perf-stat: 
mpstat: 
perf-profile: 

#! include/category/ALL
cpufreq_governor: performance

#! include/queue/cyclic
commit: 4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63

#! default params
kconfig: x86_64-rhel-7.2
compiler: gcc-6
rootfs: debian-x86_64-2016-08-31.cgz
enqueue_time: 2017-06-10 19:15:26.023843117 +08:00
_id: 593bd4cc0b9a9381371b68e1
_rt: "/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63"

#! schedule options
user: lkp
head_commit: c860701ee93b78891fbd3582a8914494c96bc71d
base_commit: 3c2993b8c6143d8a5793746a54eba8f86f95240f
branch: linux-devel/devel-hourly-2017060904
result_root: "/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/0"
LKP_SERVER: inn
max_uptime: 1500
initrd: "/osimage/debian/debian-x86_64-2016-08-31.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-200%-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63-20170610-33079-thjtts-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-7.2
- branch=linux-devel/devel-hourly-2017060904
- commit=4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c
- max_uptime=1500
- RESULT_ROOT=/result/netperf/ipv4-300s-200%-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/0
- LKP_SERVER=inn
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- console=tty0
- vga=normal
- rw
lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz"
modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/modules.cgz"
bm_initrd: "/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz"
site: inn

#! /lkp/lkp/.src-20170608-214239/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 
nfs-hang: 

#! runtime status

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-6/4d0c35c1af080033a9c2b0ac5734ca78f9bc3c63/vmlinuz-4.9.0-rc8-00001-g4d0c35c"
dequeue_time: 2017-06-10 19:40:17.573159215 +08:00

#! /lkp/lkp/.src-20170609-211823/include/site/inn
job_state: booting

[-- Attachment #7: reproduce --]
[-- Type: text/plain, Size: 685 bytes --]


for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
	online_file="$cpu_dir"/online
	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue

	file="$cpu_dir"/cpufreq/scaling_governor
	[ -f "$file" ] && echo "$scaling_governor" > "$file"
done

netserver -4
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
wait

[RFC PATCH v5 2/2] ACPI: button: Add a quirk mode for Surface Pro 1 like laptop

[Lv Zheng]

Some platforms never send "open" events, _LID returns value sticks to
"close", ex., Surface Pro 1.

Such platforms cannot work well with systemd 229 in
button.lid_init_state=method mode, but button.lid_init_state=open
workaround is available for them to work with systemd 229 and they can work
perfectly with systemd 233 in button.lid_init_state=ignore mode.

This patch introduces a boot parameter to mark such platform lid device as
unreliable to replace old button.lid_init_state=ignore mode. So that users
can use this quirk to make such platforms working with systemd 233. Since
such platform only sends "close", old complicated "open" complement event
mechanism is replaced by a simpler one of always prepending "open" before
any events.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 164 ++++++++++++++++++++------------------------------
 1 file changed, 66 insertions(+), 98 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index fd8eff6..02b85c1 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -56,9 +56,8 @@
 #define ACPI_BUTTON_DEVICE_NAME_LID	"Lid Switch"
 #define ACPI_BUTTON_TYPE_LID		0x05
 
-#define ACPI_BUTTON_LID_INIT_IGNORE	0x00
+#define ACPI_BUTTON_LID_INIT_METHOD	0x00
 #define ACPI_BUTTON_LID_INIT_OPEN	0x01
-#define ACPI_BUTTON_LID_INIT_METHOD	0x02
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -109,23 +108,20 @@ struct acpi_button {
 	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
-	int last_state;
-	ktime_t last_time;
 	bool suspended;
 };
 
+static DEFINE_MUTEX(lid_device_lock);
 static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 
-static unsigned long lid_report_interval __read_mostly = 500;
-module_param(lid_report_interval, ulong, 0644);
-MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
-
 static unsigned long lid_update_interval __read_mostly = 10 * MSEC_PER_SEC;
 module_param(lid_update_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid state updates");
 
+static bool lid_unreliable __read_mostly = false;
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -149,79 +145,12 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
-	ktime_t next_report;
-	bool do_update;
-
-	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
-	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
-	next_report = ktime_add(button->last_time,
-				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
-		/* Complain the buggy firmware */
-		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
-		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
-		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
-		}
-	}
-	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	if (lid_unreliable)
+		input_report_switch(button->input, SW_LID, 0);
+
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
 
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
@@ -382,22 +311,25 @@ static void acpi_lid_tick(struct acpi_device *device)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
-	mod_timer(&button->lid_timer,
-		  jiffies + msecs_to_jiffies(lid_update_interval));
+	if (!lid_unreliable)
+		mod_timer(&button->lid_timer,
+			  jiffies + msecs_to_jiffies(lid_update_interval));
 }
 
 static void acpi_lid_timeout(ulong arg)
 {
 	struct acpi_device *device = (struct acpi_device *)arg;
 
-	switch (lid_init_state) {
-	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1);
-		break;
-	case ACPI_BUTTON_LID_INIT_METHOD:
-		acpi_lid_update_state(device);
-		acpi_lid_tick(device);
-		break;
+	if (!lid_unreliable) {
+		switch (lid_init_state) {
+		case ACPI_BUTTON_LID_INIT_OPEN:
+			(void)acpi_lid_notify_state(device, 1);
+			break;
+		case ACPI_BUTTON_LID_INIT_METHOD:
+			acpi_lid_update_state(device);
+			acpi_lid_tick(device);
+			break;
+		}
 	}
 }
 
@@ -506,8 +438,6 @@ static int acpi_button_add(struct acpi_device *device)
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
 		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
-		button->last_state = !!acpi_lid_evaluate_state(device);
-		button->last_time = ktime_get();
 		setup_timer(&button->lid_timer,
 			    acpi_lid_timeout, (ulong)device);
 	} else {
@@ -551,7 +481,10 @@ static int acpi_button_add(struct acpi_device *device)
 		 * This assumes there's only one lid device, or if there are
 		 * more we only care about the last one...
 		 */
+		mutex_lock(&lid_device_lock);
+		get_device(&device->dev);
 		lid_device = device;
+		mutex_unlock(&lid_device_lock);
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
@@ -570,8 +503,15 @@ static int acpi_button_remove(struct acpi_device *device)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
-	if (button->type == ACPI_BUTTON_TYPE_LID)
+	if (button->type == ACPI_BUTTON_TYPE_LID) {
 		del_timer(&button->lid_timer);
+		mutex_lock(&lid_device_lock);
+		if (device == lid_device) {
+			put_device(&device->dev);
+			lid_device = NULL;
+		}
+		mutex_unlock(&lid_device_lock);
+	}
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
 	kfree(button);
@@ -588,9 +528,6 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 		pr_info("Notify initial lid state with _LID return value\n");
-	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
-		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
-		pr_info("Do not notify initial lid state\n");
 	} else
 		result = -EINVAL;
 	return result;
@@ -603,17 +540,48 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
 		return sprintf(buffer, "open");
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		return sprintf(buffer, "method");
-	case ACPI_BUTTON_LID_INIT_IGNORE:
-		return sprintf(buffer, "ignore");
 	default:
 		return sprintf(buffer, "invalid");
 	}
 	return 0;
 }
 
+static int param_set_lid_unreliable(const char *val, struct kernel_param *kp)
+{
+	int result = 0;
+	struct device *dev;
+	struct acpi_device *device;
+	struct acpi_button *button;
+
+	result = param_set_bool(val, kp);
+	if (result)
+		return result;
+
+	mutex_lock(&lid_device_lock);
+	if (lid_device) {
+		dev = get_device(&lid_device->dev);
+		mutex_unlock(&lid_device_lock);
+		device = to_acpi_device(dev);
+		button = acpi_driver_data(device);
+		if (lid_unreliable)
+			del_timer(&button->lid_timer);
+		else
+			acpi_lid_tick(device);
+		put_device(&device->dev);
+		mutex_lock(&lid_device_lock);
+	}
+	mutex_unlock(&lid_device_lock);
+	return result;
+}
+
 module_param_call(lid_init_state,
 		  param_set_lid_init_state, param_get_lid_init_state,
 		  NULL, 0644);
 MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
 
+module_param_call(lid_unreliable,
+		 param_set_lid_unreliable, param_get_bool,
+		 &lid_unreliable, 0644);
+MODULE_PARM_DESC(lid_unreliable, "Mark lid device as unreliable");
+
 module_acpi_driver(acpi_button_driver);
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v5 2/2] ACPI: button: Add a quirk mode for Surface Pro 1 like laptop

[Lv Zheng]

Some platforms never send "open" events, _LID returns value sticks to
"close", ex., Surface Pro 1.

Such platforms cannot work well with systemd 229 in
button.lid_init_state=method mode, but button.lid_init_state=open
workaround is available for them to work with systemd 229 and they can work
perfectly with systemd 233 in button.lid_init_state=ignore mode.

This patch introduces a boot parameter to mark such platform lid device as
unreliable to replace old button.lid_init_state=ignore mode. So that users
can use this quirk to make such platforms working with systemd 233. Since
such platform only sends "close", old complicated "open" complement event
mechanism is replaced by a simpler one of always prepending "open" before
any events.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 164 ++++++++++++++++++++------------------------------
 1 file changed, 66 insertions(+), 98 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index fd8eff6..02b85c1 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -56,9 +56,8 @@
 #define ACPI_BUTTON_DEVICE_NAME_LID	"Lid Switch"
 #define ACPI_BUTTON_TYPE_LID		0x05
 
-#define ACPI_BUTTON_LID_INIT_IGNORE	0x00
+#define ACPI_BUTTON_LID_INIT_METHOD	0x00
 #define ACPI_BUTTON_LID_INIT_OPEN	0x01
-#define ACPI_BUTTON_LID_INIT_METHOD	0x02
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -109,23 +108,20 @@ struct acpi_button {
 	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
-	int last_state;
-	ktime_t last_time;
 	bool suspended;
 };
 
+static DEFINE_MUTEX(lid_device_lock);
 static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 
-static unsigned long lid_report_interval __read_mostly = 500;
-module_param(lid_report_interval, ulong, 0644);
-MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
-
 static unsigned long lid_update_interval __read_mostly = 10 * MSEC_PER_SEC;
 module_param(lid_update_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid state updates");
 
+static bool lid_unreliable __read_mostly = false;
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -149,79 +145,12 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
-	ktime_t next_report;
-	bool do_update;
-
-	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
-	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
-	next_report = ktime_add(button->last_time,
-				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
-		/* Complain the buggy firmware */
-		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
-		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
-		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
-		}
-	}
-	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	if (lid_unreliable)
+		input_report_switch(button->input, SW_LID, 0);
+
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
 
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
@@ -382,22 +311,25 @@ static void acpi_lid_tick(struct acpi_device *device)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
-	mod_timer(&button->lid_timer,
-		  jiffies + msecs_to_jiffies(lid_update_interval));
+	if (!lid_unreliable)
+		mod_timer(&button->lid_timer,
+			  jiffies + msecs_to_jiffies(lid_update_interval));
 }
 
 static void acpi_lid_timeout(ulong arg)
 {
 	struct acpi_device *device = (struct acpi_device *)arg;
 
-	switch (lid_init_state) {
-	case ACPI_BUTTON_LID_INIT_OPEN:
-		(void)acpi_lid_notify_state(device, 1);
-		break;
-	case ACPI_BUTTON_LID_INIT_METHOD:
-		acpi_lid_update_state(device);
-		acpi_lid_tick(device);
-		break;
+	if (!lid_unreliable) {
+		switch (lid_init_state) {
+		case ACPI_BUTTON_LID_INIT_OPEN:
+			(void)acpi_lid_notify_state(device, 1);
+			break;
+		case ACPI_BUTTON_LID_INIT_METHOD:
+			acpi_lid_update_state(device);
+			acpi_lid_tick(device);
+			break;
+		}
 	}
 }
 
@@ -506,8 +438,6 @@ static int acpi_button_add(struct acpi_device *device)
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
 		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
-		button->last_state = !!acpi_lid_evaluate_state(device);
-		button->last_time = ktime_get();
 		setup_timer(&button->lid_timer,
 			    acpi_lid_timeout, (ulong)device);
 	} else {
@@ -551,7 +481,10 @@ static int acpi_button_add(struct acpi_device *device)
 		 * This assumes there's only one lid device, or if there are
 		 * more we only care about the last one...
 		 */
+		mutex_lock(&lid_device_lock);
+		get_device(&device->dev);
 		lid_device = device;
+		mutex_unlock(&lid_device_lock);
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
@@ -570,8 +503,15 @@ static int acpi_button_remove(struct acpi_device *device)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
-	if (button->type == ACPI_BUTTON_TYPE_LID)
+	if (button->type == ACPI_BUTTON_TYPE_LID) {
 		del_timer(&button->lid_timer);
+		mutex_lock(&lid_device_lock);
+		if (device == lid_device) {
+			put_device(&device->dev);
+			lid_device = NULL;
+		}
+		mutex_unlock(&lid_device_lock);
+	}
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
 	kfree(button);
@@ -588,9 +528,6 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 		pr_info("Notify initial lid state with _LID return value\n");
-	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
-		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
-		pr_info("Do not notify initial lid state\n");
 	} else
 		result = -EINVAL;
 	return result;
@@ -603,17 +540,48 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
 		return sprintf(buffer, "open");
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		return sprintf(buffer, "method");
-	case ACPI_BUTTON_LID_INIT_IGNORE:
-		return sprintf(buffer, "ignore");
 	default:
 		return sprintf(buffer, "invalid");
 	}
 	return 0;
 }
 
+static int param_set_lid_unreliable(const char *val, struct kernel_param *kp)
+{
+	int result = 0;
+	struct device *dev;
+	struct acpi_device *device;
+	struct acpi_button *button;
+
+	result = param_set_bool(val, kp);
+	if (result)
+		return result;
+
+	mutex_lock(&lid_device_lock);
+	if (lid_device) {
+		dev = get_device(&lid_device->dev);
+		mutex_unlock(&lid_device_lock);
+		device = to_acpi_device(dev);
+		button = acpi_driver_data(device);
+		if (lid_unreliable)
+			del_timer(&button->lid_timer);
+		else
+			acpi_lid_tick(device);
+		put_device(&device->dev);
+		mutex_lock(&lid_device_lock);
+	}
+	mutex_unlock(&lid_device_lock);
+	return result;
+}
+
 module_param_call(lid_init_state,
 		  param_set_lid_init_state, param_get_lid_init_state,
 		  NULL, 0644);
 MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
 
+module_param_call(lid_unreliable,
+		 param_set_lid_unreliable, param_get_bool,
+		 &lid_unreliable, 0644);
+MODULE_PARM_DESC(lid_unreliable, "Mark lid device as unreliable");
+
 module_acpi_driver(acpi_button_driver);
-- 
2.7.4

[RFC PATCH v6 0/5] ACPI: button: Fix button.lid_init_state=method mode

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
way:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.

This series tries to provide solutions to fix all cases for old userspace
programs. These solutions include:
1. Fix order issue in case 2,4. Enabled by default.
2. Fix event missing issue in case 3,4. As newer systemd doesn't require
   this fix, and this fix is not power friendly, it is not enabled by
   default, but can be enabled by:
   2.1. button.lid_periodic_update=1: periodically sends _LID value to
        the input layer.
3. Fix persistate close issue in case 5, as newer systemd doesn't require
   this fix, it is not enabled by default, but can be enabled in 2 means:
   3.1. button.lid_init_state=ignore: only adds complement open events.
   3.2. lid_unreliable=1: dymamically adds/removes input node.

Benjamin Tissoires (2):
  ACPI: button: extract input creation/destruction helpers
  ACPI: button: Add an optional workaround to fix a persistent close
    issue for old userspace

Lv Zheng (3):
  ACPI: button: Add a workaround to fix an order issue for old userspace
  ACPI: button: Add an optional workaround to fix an event missing issue
    for old userspace
  ACPI: button: Rework lid_init_state=ignore mode

 drivers/acpi/button.c | 302 +++++++++++++++++++++++++++++++-------------------
 1 file changed, 186 insertions(+), 116 deletions(-)

-- 
2.7.4

[RFC PATCH v6 1/5] ACPI: button: Add a workaround to fix an order issue for old userspace

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, all cases work find with systemd 233, but only case 1 works fine
with systemd 229.

Case 2,4 can be treated as an order issue:
   If the button driver always evaluates _LID after seeing a LID
   notification, there shouldn't be such a problem.

Note that this order issue cannot be fixed by sorting OS drivers' resume
code:
1. When acpi.ec_freeze_events=Y, the order depends on whether PNP0C0D(LID)
   or PNP0C09(EC) appears first in the namespace (probe order).
2. Even when acpi.ec_freeze_events=N, which forces OS to handle EC events
   as early as possible, the order issue can still be reproduced due to
   platform delays (reproduce ratio is lower than case 1).
3. Some platform simply has a very big delay for LID open events.

This patch tries to fix this issue for systemd 229 by defer sending initial
lid state 10 seconds later after resume, which ensures EC events can always
arrive before button driver evaluates _LID. It finally only fixes case 2
platforms as fixing case 4 platforms needs additional efforts (see known
issue below).

The users can configure wait timeout via button.lid_notify_timeout.

Known issu:
1. systemd/logind 229 still mis-bahaves with case 3,4 platforms
   After seeing a LID "close" event, systemd 229 will wait several seconds
   (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
   platforms, if users close lid, and re-open it during the
   HoldoffTimeoutSec period, there is still no "open" events seen by the
   userspace. Thus systemd still considers the last state as "close" and
   suspends the platform after the HoldoffTimeoutSec times out.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index e19f530..67a0d78 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -28,6 +28,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/input.h>
+#include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <acpi/button.h>
@@ -79,6 +80,7 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids);
 static int acpi_button_add(struct acpi_device *device);
 static int acpi_button_remove(struct acpi_device *device);
 static void acpi_button_notify(struct acpi_device *device, u32 event);
+static void acpi_lid_timeout(ulong arg);
 
 #ifdef CONFIG_PM_SLEEP
 static int acpi_button_suspend(struct device *dev);
@@ -104,6 +106,7 @@ static struct acpi_driver acpi_button_driver = {
 struct acpi_button {
 	unsigned int type;
 	struct input_dev *input;
+	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
 	int last_state;
@@ -119,6 +122,10 @@ static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
 
+static unsigned long lid_notify_timeout __read_mostly = 10;
+module_param(lid_notify_timeout, ulong, 0644);
+MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -371,6 +378,15 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	return acpi_lid_notify_state(device, state);
 }
 
+static void acpi_lid_start_timer(struct acpi_device *device,
+				 unsigned long msecs)
+{
+	struct acpi_button *button = acpi_driver_data(device);
+
+	mod_timer(&button->lid_timer,
+		  jiffies + msecs_to_jiffies(msecs));
+}
+
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
@@ -386,6 +402,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 	}
 }
 
+static void acpi_lid_timeout(ulong arg)
+{
+	struct acpi_device *device = (struct acpi_device *)arg;
+
+	acpi_lid_initialize_state(device);
+}
+
 static void acpi_button_notify(struct acpi_device *device, u32 event)
 {
 	struct acpi_button *button = acpi_driver_data(device);
@@ -432,6 +455,8 @@ static int acpi_button_suspend(struct device *dev)
 	struct acpi_device *device = to_acpi_device(dev);
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer(&button->lid_timer);
 	button->suspended = true;
 	return 0;
 }
@@ -443,7 +468,8 @@ static int acpi_button_resume(struct device *dev)
 
 	button->suspended = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
-		acpi_lid_initialize_state(device);
+		acpi_lid_start_timer(device,
+			lid_notify_timeout * MSEC_PER_SEC);
 	return 0;
 }
 #endif
@@ -490,6 +516,9 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		init_timer(&button->lid_timer);
+		setup_timer(&button->lid_timer,
+			    acpi_lid_timeout, (ulong)device);
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
@@ -526,12 +555,13 @@ static int acpi_button_add(struct acpi_device *device)
 	if (error)
 		goto err_remove_fs;
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
-		acpi_lid_initialize_state(device);
 		/*
 		 * This assumes there's only one lid device, or if there are
 		 * more we only care about the last one...
 		 */
 		lid_device = device;
+		acpi_lid_start_timer(device,
+			lid_notify_timeout * MSEC_PER_SEC);
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
@@ -551,6 +581,8 @@ static int acpi_button_remove(struct acpi_device *device)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	acpi_button_remove_fs(device);
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer_sync(&button->lid_timer);
 	input_unregister_device(button->input);
 	kfree(button);
 	return 0;
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v6 1/5] ACPI: button: Add a workaround to fix an order issue for old userspace

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, all cases work find with systemd 233, but only case 1 works fine
with systemd 229.

Case 2,4 can be treated as an order issue:
   If the button driver always evaluates _LID after seeing a LID
   notification, there shouldn't be such a problem.

Note that this order issue cannot be fixed by sorting OS drivers' resume
code:
1. When acpi.ec_freeze_events=Y, the order depends on whether PNP0C0D(LID)
   or PNP0C09(EC) appears first in the namespace (probe order).
2. Even when acpi.ec_freeze_events=N, which forces OS to handle EC events
   as early as possible, the order issue can still be reproduced due to
   platform delays (reproduce ratio is lower than case 1).
3. Some platform simply has a very big delay for LID open events.

This patch tries to fix this issue for systemd 229 by defer sending initial
lid state 10 seconds later after resume, which ensures EC events can always
arrive before button driver evaluates _LID. It finally only fixes case 2
platforms as fixing case 4 platforms needs additional efforts (see known
issue below).

The users can configure wait timeout via button.lid_notify_timeout.

Known issu:
1. systemd/logind 229 still mis-bahaves with case 3,4 platforms
   After seeing a LID "close" event, systemd 229 will wait several seconds
   (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
   platforms, if users close lid, and re-open it during the
   HoldoffTimeoutSec period, there is still no "open" events seen by the
   userspace. Thus systemd still considers the last state as "close" and
   suspends the platform after the HoldoffTimeoutSec times out.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index e19f530..67a0d78 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -28,6 +28,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/input.h>
+#include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <acpi/button.h>
@@ -79,6 +80,7 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids);
 static int acpi_button_add(struct acpi_device *device);
 static int acpi_button_remove(struct acpi_device *device);
 static void acpi_button_notify(struct acpi_device *device, u32 event);
+static void acpi_lid_timeout(ulong arg);
 
 #ifdef CONFIG_PM_SLEEP
 static int acpi_button_suspend(struct device *dev);
@@ -104,6 +106,7 @@ static struct acpi_driver acpi_button_driver = {
 struct acpi_button {
 	unsigned int type;
 	struct input_dev *input;
+	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
 	int last_state;
@@ -119,6 +122,10 @@ static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
 
+static unsigned long lid_notify_timeout __read_mostly = 10;
+module_param(lid_notify_timeout, ulong, 0644);
+MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -371,6 +378,15 @@ static int acpi_lid_update_state(struct acpi_device *device)
 	return acpi_lid_notify_state(device, state);
 }
 
+static void acpi_lid_start_timer(struct acpi_device *device,
+				 unsigned long msecs)
+{
+	struct acpi_button *button = acpi_driver_data(device);
+
+	mod_timer(&button->lid_timer,
+		  jiffies + msecs_to_jiffies(msecs));
+}
+
 static void acpi_lid_initialize_state(struct acpi_device *device)
 {
 	switch (lid_init_state) {
@@ -386,6 +402,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 	}
 }
 
+static void acpi_lid_timeout(ulong arg)
+{
+	struct acpi_device *device = (struct acpi_device *)arg;
+
+	acpi_lid_initialize_state(device);
+}
+
 static void acpi_button_notify(struct acpi_device *device, u32 event)
 {
 	struct acpi_button *button = acpi_driver_data(device);
@@ -432,6 +455,8 @@ static int acpi_button_suspend(struct device *dev)
 	struct acpi_device *device = to_acpi_device(dev);
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer(&button->lid_timer);
 	button->suspended = true;
 	return 0;
 }
@@ -443,7 +468,8 @@ static int acpi_button_resume(struct device *dev)
 
 	button->suspended = false;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
-		acpi_lid_initialize_state(device);
+		acpi_lid_start_timer(device,
+			lid_notify_timeout * MSEC_PER_SEC);
 	return 0;
 }
 #endif
@@ -490,6 +516,9 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		button->last_state = !!acpi_lid_evaluate_state(device);
 		button->last_time = ktime_get();
+		init_timer(&button->lid_timer);
+		setup_timer(&button->lid_timer,
+			    acpi_lid_timeout, (ulong)device);
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
@@ -526,12 +555,13 @@ static int acpi_button_add(struct acpi_device *device)
 	if (error)
 		goto err_remove_fs;
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
-		acpi_lid_initialize_state(device);
 		/*
 		 * This assumes there's only one lid device, or if there are
 		 * more we only care about the last one...
 		 */
 		lid_device = device;
+		acpi_lid_start_timer(device,
+			lid_notify_timeout * MSEC_PER_SEC);
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
@@ -551,6 +581,8 @@ static int acpi_button_remove(struct acpi_device *device)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	acpi_button_remove_fs(device);
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		del_timer_sync(&button->lid_timer);
 	input_unregister_device(button->input);
 	kfree(button);
 	return 0;
-- 
2.7.4

Re: [RFC PATCH v6 1/5] ACPI: button: Add a workaround to fix an order issue for old userspace

[Benjamin Tissoires]

On Jun 21 2017 or thereabouts, Lv Zheng wrote:
> There are platform variations implementing ACPI lid device in different
> ways:
> 1. Some platforms send "open" events to OS and the events arrive before
>    button driver is resumed;
> 2. Some platforms send "open" events to OS, but the events arrive after
>    button driver is resumed, ex., Samsung N210+;
> 3. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, and the update events arrive before
>    button driver is resumed;
> 4. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, but the update events arrive after
>    button driver is resumed, ex., Surface Pro 3;
> 5. Some platforms never send "open" events, _LID returns value sticks to
>    "close", ex., Surface Pro 1.
> Currently, all cases work find with systemd 233, but only case 1 works fine
> with systemd 229.
> 
> Case 2,4 can be treated as an order issue:
>    If the button driver always evaluates _LID after seeing a LID
>    notification, there shouldn't be such a problem.
> 
> Note that this order issue cannot be fixed by sorting OS drivers' resume
> code:
> 1. When acpi.ec_freeze_events=Y, the order depends on whether PNP0C0D(LID)
>    or PNP0C09(EC) appears first in the namespace (probe order).
> 2. Even when acpi.ec_freeze_events=N, which forces OS to handle EC events
>    as early as possible, the order issue can still be reproduced due to
>    platform delays (reproduce ratio is lower than case 1).
> 3. Some platform simply has a very big delay for LID open events.
> 
> This patch tries to fix this issue for systemd 229 by defer sending initial
> lid state 10 seconds later after resume, which ensures EC events can always
> arrive before button driver evaluates _LID. It finally only fixes case 2
> platforms as fixing case 4 platforms needs additional efforts (see known
> issue below).
> 
> The users can configure wait timeout via button.lid_notify_timeout.
> 
> Known issu:
> 1. systemd/logind 229 still mis-bahaves with case 3,4 platforms
>    After seeing a LID "close" event, systemd 229 will wait several seconds
>    (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
>    platforms, if users close lid, and re-open it during the
>    HoldoffTimeoutSec period, there is still no "open" events seen by the
>    userspace. Thus systemd still considers the last state as "close" and
>    suspends the platform after the HoldoffTimeoutSec times out.
> 
> Cc: <systemd-devel@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---

NACK on this one (at least in this current form): You are presenting a
device to user space with an unknown state.
If you want to delay the query of the state, you also need to delay the
call of input_register_device().

Cheers,
Benjamin

>  drivers/acpi/button.c | 36 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 34 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index e19f530..67a0d78 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -28,6 +28,7 @@
>  #include <linux/proc_fs.h>
>  #include <linux/seq_file.h>
>  #include <linux/input.h>
> +#include <linux/timer.h>
>  #include <linux/slab.h>
>  #include <linux/acpi.h>
>  #include <acpi/button.h>
> @@ -79,6 +80,7 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids);
>  static int acpi_button_add(struct acpi_device *device);
>  static int acpi_button_remove(struct acpi_device *device);
>  static void acpi_button_notify(struct acpi_device *device, u32 event);
> +static void acpi_lid_timeout(ulong arg);
>  
>  #ifdef CONFIG_PM_SLEEP
>  static int acpi_button_suspend(struct device *dev);
> @@ -104,6 +106,7 @@ static struct acpi_driver acpi_button_driver = {
>  struct acpi_button {
>  	unsigned int type;
>  	struct input_dev *input;
> +	struct timer_list lid_timer;
>  	char phys[32];			/* for input device */
>  	unsigned long pushed;
>  	int last_state;
> @@ -119,6 +122,10 @@ static unsigned long lid_report_interval __read_mostly = 500;
>  module_param(lid_report_interval, ulong, 0644);
>  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
>  
> +static unsigned long lid_notify_timeout __read_mostly = 10;
> +module_param(lid_notify_timeout, ulong, 0644);
> +MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
> +
>  /* --------------------------------------------------------------------------
>                                FS Interface (/proc)
>     -------------------------------------------------------------------------- */
> @@ -371,6 +378,15 @@ static int acpi_lid_update_state(struct acpi_device *device)
>  	return acpi_lid_notify_state(device, state);
>  }
>  
> +static void acpi_lid_start_timer(struct acpi_device *device,
> +				 unsigned long msecs)
> +{
> +	struct acpi_button *button = acpi_driver_data(device);
> +
> +	mod_timer(&button->lid_timer,
> +		  jiffies + msecs_to_jiffies(msecs));
> +}
> +
>  static void acpi_lid_initialize_state(struct acpi_device *device)
>  {
>  	switch (lid_init_state) {
> @@ -386,6 +402,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>  	}
>  }
>  
> +static void acpi_lid_timeout(ulong arg)
> +{
> +	struct acpi_device *device = (struct acpi_device *)arg;
> +
> +	acpi_lid_initialize_state(device);
> +}
> +
>  static void acpi_button_notify(struct acpi_device *device, u32 event)
>  {
>  	struct acpi_button *button = acpi_driver_data(device);
> @@ -432,6 +455,8 @@ static int acpi_button_suspend(struct device *dev)
>  	struct acpi_device *device = to_acpi_device(dev);
>  	struct acpi_button *button = acpi_driver_data(device);
>  
> +	if (button->type == ACPI_BUTTON_TYPE_LID)
> +		del_timer(&button->lid_timer);
>  	button->suspended = true;
>  	return 0;
>  }
> @@ -443,7 +468,8 @@ static int acpi_button_resume(struct device *dev)
>  
>  	button->suspended = false;
>  	if (button->type == ACPI_BUTTON_TYPE_LID)
> -		acpi_lid_initialize_state(device);
> +		acpi_lid_start_timer(device,
> +			lid_notify_timeout * MSEC_PER_SEC);
>  	return 0;
>  }
>  #endif
> @@ -490,6 +516,9 @@ static int acpi_button_add(struct acpi_device *device)
>  			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
>  		button->last_state = !!acpi_lid_evaluate_state(device);
>  		button->last_time = ktime_get();
> +		init_timer(&button->lid_timer);
> +		setup_timer(&button->lid_timer,
> +			    acpi_lid_timeout, (ulong)device);
>  	} else {
>  		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
>  		error = -ENODEV;
> @@ -526,12 +555,13 @@ static int acpi_button_add(struct acpi_device *device)
>  	if (error)
>  		goto err_remove_fs;
>  	if (button->type == ACPI_BUTTON_TYPE_LID) {
> -		acpi_lid_initialize_state(device);
>  		/*
>  		 * This assumes there's only one lid device, or if there are
>  		 * more we only care about the last one...
>  		 */
>  		lid_device = device;
> +		acpi_lid_start_timer(device,
> +			lid_notify_timeout * MSEC_PER_SEC);
>  	}
>  
>  	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
> @@ -551,6 +581,8 @@ static int acpi_button_remove(struct acpi_device *device)
>  	struct acpi_button *button = acpi_driver_data(device);
>  
>  	acpi_button_remove_fs(device);
> +	if (button->type == ACPI_BUTTON_TYPE_LID)
> +		del_timer_sync(&button->lid_timer);
>  	input_unregister_device(button->input);
>  	kfree(button);
>  	return 0;
> -- 
> 2.7.4
> 
_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [RFC PATCH v6 1/5] ACPI: button: Add a workaround to fix an order issue for old userspace

[Benjamin Tissoires]

On Jun 21 2017 or thereabouts, Lv Zheng wrote:
> There are platform variations implementing ACPI lid device in different
> ways:
> 1. Some platforms send "open" events to OS and the events arrive before
>    button driver is resumed;
> 2. Some platforms send "open" events to OS, but the events arrive after
>    button driver is resumed, ex., Samsung N210+;
> 3. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, and the update events arrive before
>    button driver is resumed;
> 4. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, but the update events arrive after
>    button driver is resumed, ex., Surface Pro 3;
> 5. Some platforms never send "open" events, _LID returns value sticks to
>    "close", ex., Surface Pro 1.
> Currently, all cases work find with systemd 233, but only case 1 works fine
> with systemd 229.
> 
> Case 2,4 can be treated as an order issue:
>    If the button driver always evaluates _LID after seeing a LID
>    notification, there shouldn't be such a problem.
> 
> Note that this order issue cannot be fixed by sorting OS drivers' resume
> code:
> 1. When acpi.ec_freeze_events=Y, the order depends on whether PNP0C0D(LID)
>    or PNP0C09(EC) appears first in the namespace (probe order).
> 2. Even when acpi.ec_freeze_events=N, which forces OS to handle EC events
>    as early as possible, the order issue can still be reproduced due to
>    platform delays (reproduce ratio is lower than case 1).
> 3. Some platform simply has a very big delay for LID open events.
> 
> This patch tries to fix this issue for systemd 229 by defer sending initial
> lid state 10 seconds later after resume, which ensures EC events can always
> arrive before button driver evaluates _LID. It finally only fixes case 2
> platforms as fixing case 4 platforms needs additional efforts (see known
> issue below).
> 
> The users can configure wait timeout via button.lid_notify_timeout.
> 
> Known issu:
> 1. systemd/logind 229 still mis-bahaves with case 3,4 platforms
>    After seeing a LID "close" event, systemd 229 will wait several seconds
>    (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
>    platforms, if users close lid, and re-open it during the
>    HoldoffTimeoutSec period, there is still no "open" events seen by the
>    userspace. Thus systemd still considers the last state as "close" and
>    suspends the platform after the HoldoffTimeoutSec times out.
> 
> Cc: <systemd-devel@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---

NACK on this one (at least in this current form): You are presenting a
device to user space with an unknown state.
If you want to delay the query of the state, you also need to delay the
call of input_register_device().

Cheers,
Benjamin

>  drivers/acpi/button.c | 36 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 34 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index e19f530..67a0d78 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -28,6 +28,7 @@
>  #include <linux/proc_fs.h>
>  #include <linux/seq_file.h>
>  #include <linux/input.h>
> +#include <linux/timer.h>
>  #include <linux/slab.h>
>  #include <linux/acpi.h>
>  #include <acpi/button.h>
> @@ -79,6 +80,7 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids);
>  static int acpi_button_add(struct acpi_device *device);
>  static int acpi_button_remove(struct acpi_device *device);
>  static void acpi_button_notify(struct acpi_device *device, u32 event);
> +static void acpi_lid_timeout(ulong arg);
>  
>  #ifdef CONFIG_PM_SLEEP
>  static int acpi_button_suspend(struct device *dev);
> @@ -104,6 +106,7 @@ static struct acpi_driver acpi_button_driver = {
>  struct acpi_button {
>  	unsigned int type;
>  	struct input_dev *input;
> +	struct timer_list lid_timer;
>  	char phys[32];			/* for input device */
>  	unsigned long pushed;
>  	int last_state;
> @@ -119,6 +122,10 @@ static unsigned long lid_report_interval __read_mostly = 500;
>  module_param(lid_report_interval, ulong, 0644);
>  MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
>  
> +static unsigned long lid_notify_timeout __read_mostly = 10;
> +module_param(lid_notify_timeout, ulong, 0644);
> +MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
> +
>  /* --------------------------------------------------------------------------
>                                FS Interface (/proc)
>     -------------------------------------------------------------------------- */
> @@ -371,6 +378,15 @@ static int acpi_lid_update_state(struct acpi_device *device)
>  	return acpi_lid_notify_state(device, state);
>  }
>  
> +static void acpi_lid_start_timer(struct acpi_device *device,
> +				 unsigned long msecs)
> +{
> +	struct acpi_button *button = acpi_driver_data(device);
> +
> +	mod_timer(&button->lid_timer,
> +		  jiffies + msecs_to_jiffies(msecs));
> +}
> +
>  static void acpi_lid_initialize_state(struct acpi_device *device)
>  {
>  	switch (lid_init_state) {
> @@ -386,6 +402,13 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>  	}
>  }
>  
> +static void acpi_lid_timeout(ulong arg)
> +{
> +	struct acpi_device *device = (struct acpi_device *)arg;
> +
> +	acpi_lid_initialize_state(device);
> +}
> +
>  static void acpi_button_notify(struct acpi_device *device, u32 event)
>  {
>  	struct acpi_button *button = acpi_driver_data(device);
> @@ -432,6 +455,8 @@ static int acpi_button_suspend(struct device *dev)
>  	struct acpi_device *device = to_acpi_device(dev);
>  	struct acpi_button *button = acpi_driver_data(device);
>  
> +	if (button->type == ACPI_BUTTON_TYPE_LID)
> +		del_timer(&button->lid_timer);
>  	button->suspended = true;
>  	return 0;
>  }
> @@ -443,7 +468,8 @@ static int acpi_button_resume(struct device *dev)
>  
>  	button->suspended = false;
>  	if (button->type == ACPI_BUTTON_TYPE_LID)
> -		acpi_lid_initialize_state(device);
> +		acpi_lid_start_timer(device,
> +			lid_notify_timeout * MSEC_PER_SEC);
>  	return 0;
>  }
>  #endif
> @@ -490,6 +516,9 @@ static int acpi_button_add(struct acpi_device *device)
>  			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
>  		button->last_state = !!acpi_lid_evaluate_state(device);
>  		button->last_time = ktime_get();
> +		init_timer(&button->lid_timer);
> +		setup_timer(&button->lid_timer,
> +			    acpi_lid_timeout, (ulong)device);
>  	} else {
>  		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
>  		error = -ENODEV;
> @@ -526,12 +555,13 @@ static int acpi_button_add(struct acpi_device *device)
>  	if (error)
>  		goto err_remove_fs;
>  	if (button->type == ACPI_BUTTON_TYPE_LID) {
> -		acpi_lid_initialize_state(device);
>  		/*
>  		 * This assumes there's only one lid device, or if there are
>  		 * more we only care about the last one...
>  		 */
>  		lid_device = device;
> +		acpi_lid_start_timer(device,
> +			lid_notify_timeout * MSEC_PER_SEC);
>  	}
>  
>  	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
> @@ -551,6 +581,8 @@ static int acpi_button_remove(struct acpi_device *device)
>  	struct acpi_button *button = acpi_driver_data(device);
>  
>  	acpi_button_remove_fs(device);
> +	if (button->type == ACPI_BUTTON_TYPE_LID)
> +		del_timer_sync(&button->lid_timer);
>  	input_unregister_device(button->input);
>  	kfree(button);
>  	return 0;
> -- 
> 2.7.4
> 

[lkp-robot] [ACPI] c4a9ff748c: BUG:scheduling_while_atomic

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 15725 bytes --]


FYI, we noticed the following commit:

commit: c4a9ff748c1ca2fe81e012ac32e1daa70702778b ("ACPI: button: Add a workaround to fix an order issue for old userspace")
url: https://github.com/0day-ci/linux/commits/Lv-Zheng/ACPI-button-Fix-button-lid_init_state-method-mode/20170622-143854


in testcase: netperf
with following parameters:

	ip: ipv4
	runtime: 300s
	nr_threads: 1
	cluster: cs-localhost
	test: TCP_CRR
	cpufreq_governor: performance

test-description: Netperf is a benchmark that can be use to measure various aspect of networking performance.
test-url: http://www.netperf.org/netperf/


on test machine: 4 threads Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz with 4G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+-----------------------------------------------------------------------------------------------------+-----------+------------+
|                                                                                                     | v4.12-rc6 | c4a9ff748c |
+-----------------------------------------------------------------------------------------------------+-----------+------------+
| boot_successes                                                                                      | 9404      | 3          |
| boot_failures                                                                                       | 2560      | 9          |
| ACPI_Error:Field[CPB3]at#exceeds_Buffer[NULL]size#(bits)(#/dsopcode-#)                              | 365       |            |
| ACPI_Error:Method_parse/execution_failed[~_SB._OSC](Node#),AE_AML_BUFFER_LIMIT(#/psparse-#)         | 365       |            |
| cpu_clock_throttled                                                                                 | 362       |            |
| Kernel_panic-not_syncing:Fatal_hardware_error                                                       | 2         |            |
| Mem-Info                                                                                            | 560       |            |
| invoked_oom-killer:gfp_mask=0x                                                                      | 528       |            |
| Out_of_memory:Kill_process                                                                          | 80        |            |
| BUG:Bad_page_state_in_process                                                                       | 25        |            |
| BUG:Bad_rss-counter_state_mm:#idx:#val                                                              | 18        |            |
| BUG:Bad_page_map_in_process                                                                         | 7         |            |
| page_allocation_failure:order:#,mode:#(GFP_ATOMIC|__GFP_COMP|__GFP_NOTRACK),nodemask=(null)         | 3         |            |
| WARNING:at_lib/list_debug.c:#__list_add_valid                                                       | 2         |            |
| INFO:rcu_sched_detected_stalls_on_CPUs/tasks                                                        | 2         |            |
| BUG:Bad_page_state:#messages_suppressed                                                             | 1         |            |
| WARNING:at_drivers/gpu/drm/drm_irq.c:#drm_wait_one_vblank[drm]                                      | 19        |            |
| WARNING:at_lib/list_debug.c:#__list_del_entry_valid                                                 | 2         |            |
| general_protection_fault:#[##]                                                                      | 2         |            |
| Kernel_panic-not_syncing:Fatal_exception                                                            | 3         |            |
| page_allocation_failure:order:#,mode:#(GFP_ATOMIC|__GFP_COMP|__GFP_ZERO),nodemask=(null)            | 18        |            |
| WARNING:at_drivers/gpu/drm/drm_vblank.c:#drm_wait_one_vblank[drm]                                   | 5         |            |
| page_allocation_failure:order:#,mode:#(GFP_KERNEL|__GFP_NORETRY),nodemask=(null)                    | 11        |            |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/rwsem.c                         | 4         |            |
| BUG:non-zero_nr_ptes_on_freeing_mm                                                                  | 13        |            |
| ACPI_Error:Field[CPB3]at_bit_offset/length#exceeds_size_of_target_Buffer(#bits)(#/dsopcode-#)       | 116       |            |
| ACPI_Error:Method_parse/execution_failed~_SB._OSC,AE_AML_BUFFER_LIMIT(#/psparse-#)                  | 116       |            |
| ACPI_Error:Method_parse/execution_failed~_SB.PC00.IOTR._CRS,AE_AML_NO_RESOURCE_END_TAG(#/psparse-#) | 129       |            |
| ACPI_Error:Method_execution_failed~_SB.PC00.IOTR._CRS,AE_AML_NO_RESOURCE_END_TAG(#/uteval-#)        | 129       |            |
| Kernel_panic-not_syncing:Hard_LOCKUP                                                                | 103       |            |
| Kernel_panic-not_syncing:Attempted_to_kill_init!exitcode=                                           | 20        |            |
| ACPI_Error:[~_SB_.PCI0.XHC_.RHUB.HS11]Namespace_lookup_failure,AE_NOT_FOUND(#/dswload-#)            | 15        |            |
| ACPI_Error:#table_load_failures,#successful(#/tbxfload-#)                                           | 15        |            |
| WARNING:at_drivers/gpu/drm/i915/intel_display.c:#intel_modeset_init[i915]                           | 259       | 9          |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/mutex.c                         | 3         | 1          |
| INFO:creating/lkp/benchmarks/ltp/output_directory                                                   | 351       |            |
| INFO:creating/lkp/benchmarks/ltp/results_directory                                                  | 351       |            |
| INFO:ltp-pan_reported_some_tests_FAIL                                                               | 88        |            |
| INFO:ltp-pan_reported_all_tests_PASS                                                                | 208       |            |
| page_allocation_failure:order:#,mode:#(GFP_HIGHUSER_MOVABLE|__GFP_ZERO),nodemask=(null)             | 2         |            |
| WARNING:at_kernel/events/core.c:#add_event_to_ctx                                                   | 5         |            |
| WARNING:at_kernel/events/core.c:#event_sched_out                                                    | 5         |            |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/irq/manage.c                            | 1         |            |
| calltrace:init_netconsole                                                                           | 1         |            |
| calltrace:SyS_finit_module                                                                          | 2         |            |
| calltrace:SyS_write                                                                                 | 1         |            |
| BUG:unable_to_handle_kernel                                                                         | 1         |            |
| Oops:#[##]                                                                                          | 1         |            |
| WARNING:at_fs/sysfs/dir.c:#sysfs_warn_dup                                                           | 1         |            |
| calltrace:parport_pc_init                                                                           | 1         |            |
| WARNING:at_lib/kobject.c:#kobject_add_internal                                                      | 1         |            |
| Kernel_panic-not_syncing:Out_of_memory_and_no_killable_processes                                    | 447       |            |
| BUG:kernel_hang_in_test_stage                                                                       | 263       |            |
| BUG:soft_lockup-CPU##stuck_for#s                                                                    | 1         |            |
| Kernel_panic-not_syncing:softlockup:hung_tasks                                                      | 1         |            |
| BUG:kernel_reboot-without-warning_in_boot_stage                                                     | 1         |            |
| BUG:kernel_reboot-without-warning_in_test_stage                                                     | 12        |            |
| WARNING:at_kernel/workqueue.c:#process_one_work                                                     | 1         |            |
| BUG:scheduling_while_atomic                                                                         | 0         | 8          |
| WARNING:at_kernel/time/timer.c:#call_timer_fn                                                       | 0         | 8          |
+-----------------------------------------------------------------------------------------------------+-----------+------------+



[   14.828015] BUG: scheduling while atomic: swapper/0/0/0x00000102
[   14.828552] Modules linked in:
[   14.828846] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.12.0-rc6-00001-gc4a9ff74 #1
[   14.829454] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   14.830113] Call Trace:
[   14.830363]  <IRQ>
[   14.831578]  dump_stack+0x63/0x86
[   14.831887]  __schedule_bug+0x54/0x70
[   14.832212]  __schedule+0x633/0x850
[   14.832530]  schedule+0x3d/0x90
[   14.832826]  schedule_timeout+0x174/0x310
[   14.833176]  ? call_timer_fn+0x150/0x150
[   14.833518]  ec_guard+0x1c6/0x1d0
[   14.833821]  ? ec_guard+0x1c6/0x1d0
[   14.834135]  ? remove_wait_queue+0x70/0x70
[   14.834487]  acpi_ec_transaction+0x181/0x3b0
[   14.834850]  acpi_ec_read+0x42/0x50
[   14.835166]  acpi_ec_space_handler+0xa5/0x240
[   14.835534]  ? __update_load_avg_se+0x15b/0x180
[   14.835955]  ? acpi_os_signal_semaphore+0x4d/0x90
[   14.836345]  ? acpi_ut_release_mutex+0x11c/0x127
[   14.836727]  acpi_ev_address_space_dispatch+0x2ce/0x33a
[   14.837147]  ? ec_transaction+0x50/0x50
[   14.837483]  acpi_ex_access_region+0x414/0x4ca
[   14.837858]  ? __might_sleep+0x4a/0x80
[   14.838187]  acpi_ex_field_datum_io+0x178/0x3fa
[   14.838564]  acpi_ex_extract_from_field+0x151/0x2bb
[   14.838964]  acpi_ex_read_data_from_field+0x380/0x3d0
[   14.839374]  acpi_ex_resolve_node_to_value+0x326/0x443
[   14.839790]  acpi_ex_resolve_to_value+0x374/0x40e
[   14.840179]  acpi_ds_evaluate_name_path+0xa3/0x143
[   14.840573]  acpi_ds_exec_end_op+0xd1/0x6c6
[   14.840930]  acpi_ps_parse_loop+0x819/0x8b5
[   14.841287]  ? acpi_ut_trace+0x26/0x66
[   14.841617]  acpi_ps_parse_aml+0x1ac/0x4a1
[   14.841968]  acpi_ps_execute_method+0x1f4/0x2b6
[   14.842349]  acpi_ns_evaluate+0x2ee/0x435
[   14.842696]  acpi_evaluate_object+0x178/0x38e
[   14.843065]  ? acpi_lid_update_state+0x50/0x50
[   14.843439]  acpi_evaluate_integer+0x3e/0xd0
[   14.843802]  acpi_lid_update_state+0x27/0x50
[   14.844164]  acpi_lid_timeout+0x1d/0x30
[   14.844501]  call_timer_fn+0x35/0x150
[   14.844828]  run_timer_softirq+0x1e8/0x460
[   14.845180]  ? ktime_get+0x41/0xa0
[   14.845490]  ? lapic_next_deadline+0x26/0x30
[   14.845851]  ? clockevents_program_event+0x7a/0xf0
[   14.846246]  __do_softirq+0x104/0x2ab
[   14.846572]  irq_exit+0xf1/0x100
[   14.846872]  smp_apic_timer_interrupt+0x3d/0x50
[   14.847249]  apic_timer_interrupt+0x93/0xa0
[   14.847608] RIP: 0010:cpuidle_enter_state+0x121/0x2d0
[   14.848013] RSP: 0018:ffffffff81e03df0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[   14.848618] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 000000000000001f
[   14.849151] RDX: 0000000373cf2cc5 RSI: ffff88011f2195d8 RDI: 0000000000000000
[   14.849682] RBP: ffffffff81e03e28 R08: 00000000000f41c9 R09: 0000000000000018
[   14.850214] R10: ffffffff81e03dc0 R11: 000000000007cf4d R12: ffff88011f225800
[   14.850747] R13: ffffffff81fa9c58 R14: 0000000373cf2cc5 R15: ffffffff81fa9c40
[   14.851281]  </IRQ>
[   14.851516]  cpuidle_enter+0x17/0x20
[   14.851837]  call_cpuidle+0x23/0x40
[   14.852152]  do_idle+0x189/0x1e0
[   14.852451]  cpu_startup_entry+0x1d/0x20
[   14.852791]  rest_init+0x85/0x90
[   14.853093]  start_kernel+0x3f8/0x405
[   14.853419]  ? early_idt_handler_array+0x120/0x120
[   14.853812]  x86_64_start_reservations+0x2f/0x31
[   14.854195]  x86_64_start_kernel+0x143/0x152
[   14.854557]  secondary_startup_64+0x9f/0x9f
[   14.854990] ACPI : button: The lid device is not compliant to SW_LID.
[   14.855491] timer: acpi_lid_timeout+0x0/0x30 preempt leak: 00000101 -> 00000000
[   14.856086] ------------[ cut here ]------------
[   14.856473] WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1275 call_timer_fn+0x13c/0x150
[   14.857188] Modules linked in:
[   14.857479] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.12.0-rc6-00001-gc4a9ff74 #1
[   14.858158] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   14.858818] task: ffffffff81e104c0 task.stack: ffffffff81e00000
[   14.859279] RIP: 0010:call_timer_fn+0x13c/0x150
[   14.859655] RSP: 0018:ffff88011f203e98 EFLAGS: 00010292
[   14.860073] RAX: 0000000000000043 RBX: 0000000000000001 RCX: ffffffff81e61488
[   14.860607] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[   14.861138] RBP: ffff88011f203ec0 R08: 0000000000000000 R09: 000000000000035e
[   14.861672] R10: ffffea0004714b40 R11: 000000008237d701 R12: 0000000000000101
[   14.862203] R13: ffff8800c7535990 R14: ffffffff815734e0 R15: ffff880101cb6800
[   14.862735] FS:  0000000000000000(0000) GS:ffff88011f200000(0000) knlGS:0000000000000000
[   14.863371] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   14.863819] CR2: 00007fc0dcc49267 CR3: 000000011de09000 CR4: 00000000001406f0
[   14.864354] Call Trace:
[   14.864605]  <IRQ>
[   14.864831]  run_timer_softirq+0x1e8/0x460
[   14.865185]  ? ktime_get+0x41/0xa0
[   14.865493]  ? lapic_next_deadline+0x26/0x30
[   14.865854]  ? clockevents_program_event+0x7a/0xf0
[   14.866248]  __do_softirq+0x104/0x2ab
[   14.866573]  irq_exit+0xf1/0x100
[   14.866874]  smp_apic_timer_interrupt+0x3d/0x50
[   14.867252]  apic_timer_interrupt+0x93/0xa0
[   14.867609] RIP: 0010:cpuidle_enter_state+0x121/0x2d0
[   14.868017] RSP: 0018:ffffffff81e03df0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[   14.868619] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 000000000000001f
[   14.869151] RDX: 0000000373cf2cc5 RSI: ffff88011f2195d8 RDI: 0000000000000000
[   14.869682] RBP: ffffffff81e03e28 R08: 00000000000f41c9 R09: 0000000000000018
[   14.870216] R10: ffffffff81e03dc0 R11: 000000000007cf4d R12: ffff88011f225800
[   14.870747] R13: ffffffff81fa9c58 R14: 0000000373cf2cc5 R15: ffffffff81fa9c40
[   14.871278]  </IRQ>
[   14.871513]  cpuidle_enter+0x17/0x20
[   14.871831]  call_cpuidle+0x23/0x40
[   14.872143]  do_idle+0x189/0x1e0
[   14.872443]  cpu_startup_entry+0x1d/0x20
[   14.872783]  rest_init+0x85/0x90
[   14.873083]  start_kernel+0x3f8/0x405
[   14.873411]  ? early_idt_handler_array+0x120/0x120
[   14.873807]  x86_64_start_reservations+0x2f/0x31
[   14.874192]  x86_64_start_kernel+0x143/0x152
[   14.874554]  secondary_startup_64+0x9f/0x9f
[   14.874910] Code: 03 48 85 c0 75 eb 65 ff 0d e2 9f f1 7e e9 0c ff ff ff 44 89 e2 4c 89 f6 48 c7 c7 08 5d ca 81 c6 05 d1 24 e2 00 01 e8 81 66 0a 00 <0f> ff e9 16 ff ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 
[   14.876305] ---[ end trace dfc99d55faf65cc8 ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Xiaolong

[-- Attachment #2: config-4.12.0-rc6-00001-gc4a9ff74 --]
[-- Type: text/plain, Size: 159327 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.12.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_INTEL_RDT_A=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#
# CONFIG_VMD is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_RT is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
# CONFIG_NFT_SET_BITMAP is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NFT_FIB_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
# CONFIG_NFT_FIB_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_RAM_DAX is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=m
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VX855 is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_SPI is not set
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
# CONFIG_HDMI_LPE_AUDIO is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_GHES is not set
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TSCPAGE=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_TCPM is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_WMI is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_SURFACE3_WMI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_CHT_INT33FE is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_RAS_CEC is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
CONFIG_UEFI_CPER=y
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_MEMTEST is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 7139 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='netperf'
	export testcase='netperf'
	export category='benchmark'
	export disable_latency_stats=1
	export set_nic_irq_affinity=1
	export ip='ipv4'
	export runtime=300
	export nr_threads=1
	export cluster='cs-localhost'
	export job_origin='/lkp/lkp/.src-20170627-171455/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml'
	export queue='bisect'
	export testbox='lkp-u410'
	export tbox_group='lkp-u410'
	export submit_id='5954a7830b9a93fe79aef76d'
	export job_file='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml'
	export id='afdee65cca4b30282413722b9d8b48df20841e1f'
	export model='Ivy Bridge'
	export nr_cpu=4
	export memory='4G'
	export nr_hdd_partitions=0
	export hdd_partitions=
	export netconsole_port=6674
	export brand='Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'
	export commit='c4a9ff748c1ca2fe81e012ac32e1daa70702778b'
	export kconfig='x86_64-rhel-7.2'
	export compiler='gcc-6'
	export rootfs='debian-x86_64-2016-08-31.cgz'
	export enqueue_time='2017-06-29 15:08:52 +0800'
	export _id='5954a7830b9a93fe79aef76d'
	export _rt='/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b'
	export user='lkp'
	export head_commit='6d347c405fc4a2fee6aede857b9c764f2299ecfa'
	export base_commit='c0bc126f97fb929b3ae02c1c62322645d70eb408'
	export branch='linux-devel/devel-hourly-2017062713'
	export result_root='/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.2
branch=linux-devel/devel-hourly-2017062713
commit=c4a9ff748c1ca2fe81e012ac32e1daa70702778b
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74
max_uptime=1500
RESULT_ROOT=/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debi
 an-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74'
	export dequeue_time='2017-06-29 15:35:37 +0800'
	export node_roles='server client'
	export job_initrd='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper iostat
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
	run_monitor $LKP_SRC/monitors/wrapper proc-stat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper slabinfo
	run_monitor $LKP_SRC/monitors/wrapper interrupts
	run_monitor $LKP_SRC/monitors/wrapper lock_stat
	run_monitor $LKP_SRC/monitors/wrapper latency_stats
	run_monitor $LKP_SRC/monitors/wrapper softirqs
	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
	run_monitor $LKP_SRC/monitors/wrapper diskstats
	run_monitor $LKP_SRC/monitors/wrapper nfsstat
	run_monitor $LKP_SRC/monitors/wrapper cpuidle
	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
	run_monitor $LKP_SRC/monitors/wrapper turbostat
	run_monitor $LKP_SRC/monitors/wrapper sched_debug
	run_monitor $LKP_SRC/monitors/wrapper perf-stat
	run_monitor $LKP_SRC/monitors/wrapper mpstat
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	if role server
	then
		start_daemon $LKP_SRC/daemon/netserver
	fi

	if role client
	then
		run_test test='TCP_CRR' $LKP_SRC/tests/wrapper netperf
	fi
}

extract_stats()
{
	$LKP_SRC/stats/wrapper netperf
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper iostat
	$LKP_SRC/stats/wrapper vmstat
	$LKP_SRC/stats/wrapper numa-numastat
	$LKP_SRC/stats/wrapper numa-vmstat
	$LKP_SRC/stats/wrapper numa-meminfo
	$LKP_SRC/stats/wrapper proc-vmstat
	$LKP_SRC/stats/wrapper meminfo
	$LKP_SRC/stats/wrapper slabinfo
	$LKP_SRC/stats/wrapper interrupts
	$LKP_SRC/stats/wrapper lock_stat
	$LKP_SRC/stats/wrapper latency_stats
	$LKP_SRC/stats/wrapper softirqs
	$LKP_SRC/stats/wrapper diskstats
	$LKP_SRC/stats/wrapper nfsstat
	$LKP_SRC/stats/wrapper cpuidle
	$LKP_SRC/stats/wrapper turbostat
	$LKP_SRC/stats/wrapper sched_debug
	$LKP_SRC/stats/wrapper perf-stat
	$LKP_SRC/stats/wrapper mpstat
	$LKP_SRC/stats/wrapper perf-profile

	$LKP_SRC/stats/wrapper time netperf.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 21552 bytes --]

[-- Attachment #5: netperf --]
[-- Type: text/plain, Size: 544 bytes --]

2017-06-29 15:37:39 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-29 15:37:39 wait
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  15411.39   32.40  32.41  84.101  84.132
16384  87380 

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 4669 bytes --]

---

#! jobs/netperf.yaml
suite: netperf
testcase: netperf
category: benchmark

# upto 90% CPU cycles may be used by latency stats
disable_latency_stats: 1
set_nic_irq_affinity: 1
ip: ipv4
runtime: 300s
nr_threads: 1
cluster: cs-localhost
if role server:
  netserver: 
if role client:
  netperf:
    test: TCP_CRR
job_origin: "/lkp/lkp/.src-20170627-171455/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml"

#! queue options
queue: bisect
testbox: lkp-u410
tbox_group: lkp-u410
submit_id: 5954a7830b9a93fe79aef76d
job_file: "/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml"
id: afdee65cca4b30282413722b9d8b48df20841e1f

#! hosts/lkp-u410
model: Ivy Bridge
nr_cpu: 4
memory: 4G
nr_hdd_partitions: 0
hdd_partitions: 
netconsole_port: 6674
brand: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz

#! include/category/benchmark
kmsg: 
iostat: 
heartbeat: 
vmstat: 
numa-numastat: 
numa-vmstat: 
numa-meminfo: 
proc-vmstat: 
proc-stat: 
meminfo: 
slabinfo: 
interrupts: 
lock_stat: 
latency_stats: 
softirqs: 
bdi_dev_mapping: 
diskstats: 
nfsstat: 
cpuidle: 
cpufreq-stats: 
turbostat: 
sched_debug: 
perf-stat: 
mpstat: 
perf-profile: 

#! include/category/ALL
cpufreq_governor: performance

#! include/queue/cyclic
commit: c4a9ff748c1ca2fe81e012ac32e1daa70702778b

#! default params
kconfig: x86_64-rhel-7.2
compiler: gcc-6
rootfs: debian-x86_64-2016-08-31.cgz
enqueue_time: 2017-06-29 15:08:52.572029741 +08:00
_id: 5954a7830b9a93fe79aef76d
_rt: "/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b"

#! schedule options
user: lkp
head_commit: 6d347c405fc4a2fee6aede857b9c764f2299ecfa
base_commit: c0bc126f97fb929b3ae02c1c62322645d70eb408
branch: linux-devel/devel-hourly-2017062713
result_root: "/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0"
LKP_SERVER: inn
max_uptime: 1500
initrd: "/osimage/debian/debian-x86_64-2016-08-31.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-7.2
- branch=linux-devel/devel-hourly-2017062713
- commit=c4a9ff748c1ca2fe81e012ac32e1daa70702778b
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74
- max_uptime=1500
- RESULT_ROOT=/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0
- LKP_SERVER=inn
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- console=tty0
- vga=normal
- rw
lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz"
modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/modules.cgz"
bm_initrd: "/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_
 64-2016-08-31.cgz/cluster_2016-11-24.cgz"
site: inn

#! /lkp/lkp/.src-20170627-180606/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 
nfs-hang: 

#! runtime status

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74"
dequeue_time: 2017-06-29 15:35:37.239279421 +08:00

#! /lkp/lkp/.src-20170629-145157/include/site/inn
job_state: finished
loadavg: '1.06'

[-- Attachment #7: reproduce --]
[-- Type: text/plain, Size: 328 bytes --]


for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
	online_file="$cpu_dir"/online
	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue

	file="$cpu_dir"/cpufreq/scaling_governor
	[ -f "$file" ] && echo "$scaling_governor" > "$file"
done

netserver -4
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
wait

[lkp-robot] [ACPI] c4a9ff748c: BUG:scheduling_while_atomic

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 15948 bytes --]


FYI, we noticed the following commit:

commit: c4a9ff748c1ca2fe81e012ac32e1daa70702778b ("ACPI: button: Add a workaround to fix an order issue for old userspace")
url: https://github.com/0day-ci/linux/commits/Lv-Zheng/ACPI-button-Fix-button-lid_init_state-method-mode/20170622-143854


in testcase: netperf
with following parameters:

	ip: ipv4
	runtime: 300s
	nr_threads: 1
	cluster: cs-localhost
	test: TCP_CRR
	cpufreq_governor: performance

test-description: Netperf is a benchmark that can be use to measure various aspect of networking performance.
test-url: http://www.netperf.org/netperf/


on test machine: 4 threads Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz with 4G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+-----------------------------------------------------------------------------------------------------+-----------+------------+
|                                                                                                     | v4.12-rc6 | c4a9ff748c |
+-----------------------------------------------------------------------------------------------------+-----------+------------+
| boot_successes                                                                                      | 9404      | 3          |
| boot_failures                                                                                       | 2560      | 9          |
| ACPI_Error:Field[CPB3]at#exceeds_Buffer[NULL]size#(bits)(#/dsopcode-#)                              | 365       |            |
| ACPI_Error:Method_parse/execution_failed[~_SB._OSC](Node#),AE_AML_BUFFER_LIMIT(#/psparse-#)         | 365       |            |
| cpu_clock_throttled                                                                                 | 362       |            |
| Kernel_panic-not_syncing:Fatal_hardware_error                                                       | 2         |            |
| Mem-Info                                                                                            | 560       |            |
| invoked_oom-killer:gfp_mask=0x                                                                      | 528       |            |
| Out_of_memory:Kill_process                                                                          | 80        |            |
| BUG:Bad_page_state_in_process                                                                       | 25        |            |
| BUG:Bad_rss-counter_state_mm:#idx:#val                                                              | 18        |            |
| BUG:Bad_page_map_in_process                                                                         | 7         |            |
| page_allocation_failure:order:#,mode:#(GFP_ATOMIC|__GFP_COMP|__GFP_NOTRACK),nodemask=(null)         | 3         |            |
| WARNING:at_lib/list_debug.c:#__list_add_valid                                                       | 2         |            |
| INFO:rcu_sched_detected_stalls_on_CPUs/tasks                                                        | 2         |            |
| BUG:Bad_page_state:#messages_suppressed                                                             | 1         |            |
| WARNING:at_drivers/gpu/drm/drm_irq.c:#drm_wait_one_vblank[drm]                                      | 19        |            |
| WARNING:at_lib/list_debug.c:#__list_del_entry_valid                                                 | 2         |            |
| general_protection_fault:#[##]                                                                      | 2         |            |
| Kernel_panic-not_syncing:Fatal_exception                                                            | 3         |            |
| page_allocation_failure:order:#,mode:#(GFP_ATOMIC|__GFP_COMP|__GFP_ZERO),nodemask=(null)            | 18        |            |
| WARNING:at_drivers/gpu/drm/drm_vblank.c:#drm_wait_one_vblank[drm]                                   | 5         |            |
| page_allocation_failure:order:#,mode:#(GFP_KERNEL|__GFP_NORETRY),nodemask=(null)                    | 11        |            |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/rwsem.c                         | 4         |            |
| BUG:non-zero_nr_ptes_on_freeing_mm                                                                  | 13        |            |
| ACPI_Error:Field[CPB3]at_bit_offset/length#exceeds_size_of_target_Buffer(#bits)(#/dsopcode-#)       | 116       |            |
| ACPI_Error:Method_parse/execution_failed~_SB._OSC,AE_AML_BUFFER_LIMIT(#/psparse-#)                  | 116       |            |
| ACPI_Error:Method_parse/execution_failed~_SB.PC00.IOTR._CRS,AE_AML_NO_RESOURCE_END_TAG(#/psparse-#) | 129       |            |
| ACPI_Error:Method_execution_failed~_SB.PC00.IOTR._CRS,AE_AML_NO_RESOURCE_END_TAG(#/uteval-#)        | 129       |            |
| Kernel_panic-not_syncing:Hard_LOCKUP                                                                | 103       |            |
| Kernel_panic-not_syncing:Attempted_to_kill_init!exitcode=                                           | 20        |            |
| ACPI_Error:[~_SB_.PCI0.XHC_.RHUB.HS11]Namespace_lookup_failure,AE_NOT_FOUND(#/dswload-#)            | 15        |            |
| ACPI_Error:#table_load_failures,#successful(#/tbxfload-#)                                           | 15        |            |
| WARNING:at_drivers/gpu/drm/i915/intel_display.c:#intel_modeset_init[i915]                           | 259       | 9          |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/mutex.c                         | 3         | 1          |
| INFO:creating/lkp/benchmarks/ltp/output_directory                                                   | 351       |            |
| INFO:creating/lkp/benchmarks/ltp/results_directory                                                  | 351       |            |
| INFO:ltp-pan_reported_some_tests_FAIL                                                               | 88        |            |
| INFO:ltp-pan_reported_all_tests_PASS                                                                | 208       |            |
| page_allocation_failure:order:#,mode:#(GFP_HIGHUSER_MOVABLE|__GFP_ZERO),nodemask=(null)             | 2         |            |
| WARNING:at_kernel/events/core.c:#add_event_to_ctx                                                   | 5         |            |
| WARNING:at_kernel/events/core.c:#event_sched_out                                                    | 5         |            |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/irq/manage.c                            | 1         |            |
| calltrace:init_netconsole                                                                           | 1         |            |
| calltrace:SyS_finit_module                                                                          | 2         |            |
| calltrace:SyS_write                                                                                 | 1         |            |
| BUG:unable_to_handle_kernel                                                                         | 1         |            |
| Oops:#[##]                                                                                          | 1         |            |
| WARNING:at_fs/sysfs/dir.c:#sysfs_warn_dup                                                           | 1         |            |
| calltrace:parport_pc_init                                                                           | 1         |            |
| WARNING:at_lib/kobject.c:#kobject_add_internal                                                      | 1         |            |
| Kernel_panic-not_syncing:Out_of_memory_and_no_killable_processes                                    | 447       |            |
| BUG:kernel_hang_in_test_stage                                                                       | 263       |            |
| BUG:soft_lockup-CPU##stuck_for#s                                                                    | 1         |            |
| Kernel_panic-not_syncing:softlockup:hung_tasks                                                      | 1         |            |
| BUG:kernel_reboot-without-warning_in_boot_stage                                                     | 1         |            |
| BUG:kernel_reboot-without-warning_in_test_stage                                                     | 12        |            |
| WARNING:at_kernel/workqueue.c:#process_one_work                                                     | 1         |            |
| BUG:scheduling_while_atomic                                                                         | 0         | 8          |
| WARNING:at_kernel/time/timer.c:#call_timer_fn                                                       | 0         | 8          |
+-----------------------------------------------------------------------------------------------------+-----------+------------+



[   14.828015] BUG: scheduling while atomic: swapper/0/0/0x00000102
[   14.828552] Modules linked in:
[   14.828846] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.12.0-rc6-00001-gc4a9ff74 #1
[   14.829454] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   14.830113] Call Trace:
[   14.830363]  <IRQ>
[   14.831578]  dump_stack+0x63/0x86
[   14.831887]  __schedule_bug+0x54/0x70
[   14.832212]  __schedule+0x633/0x850
[   14.832530]  schedule+0x3d/0x90
[   14.832826]  schedule_timeout+0x174/0x310
[   14.833176]  ? call_timer_fn+0x150/0x150
[   14.833518]  ec_guard+0x1c6/0x1d0
[   14.833821]  ? ec_guard+0x1c6/0x1d0
[   14.834135]  ? remove_wait_queue+0x70/0x70
[   14.834487]  acpi_ec_transaction+0x181/0x3b0
[   14.834850]  acpi_ec_read+0x42/0x50
[   14.835166]  acpi_ec_space_handler+0xa5/0x240
[   14.835534]  ? __update_load_avg_se+0x15b/0x180
[   14.835955]  ? acpi_os_signal_semaphore+0x4d/0x90
[   14.836345]  ? acpi_ut_release_mutex+0x11c/0x127
[   14.836727]  acpi_ev_address_space_dispatch+0x2ce/0x33a
[   14.837147]  ? ec_transaction+0x50/0x50
[   14.837483]  acpi_ex_access_region+0x414/0x4ca
[   14.837858]  ? __might_sleep+0x4a/0x80
[   14.838187]  acpi_ex_field_datum_io+0x178/0x3fa
[   14.838564]  acpi_ex_extract_from_field+0x151/0x2bb
[   14.838964]  acpi_ex_read_data_from_field+0x380/0x3d0
[   14.839374]  acpi_ex_resolve_node_to_value+0x326/0x443
[   14.839790]  acpi_ex_resolve_to_value+0x374/0x40e
[   14.840179]  acpi_ds_evaluate_name_path+0xa3/0x143
[   14.840573]  acpi_ds_exec_end_op+0xd1/0x6c6
[   14.840930]  acpi_ps_parse_loop+0x819/0x8b5
[   14.841287]  ? acpi_ut_trace+0x26/0x66
[   14.841617]  acpi_ps_parse_aml+0x1ac/0x4a1
[   14.841968]  acpi_ps_execute_method+0x1f4/0x2b6
[   14.842349]  acpi_ns_evaluate+0x2ee/0x435
[   14.842696]  acpi_evaluate_object+0x178/0x38e
[   14.843065]  ? acpi_lid_update_state+0x50/0x50
[   14.843439]  acpi_evaluate_integer+0x3e/0xd0
[   14.843802]  acpi_lid_update_state+0x27/0x50
[   14.844164]  acpi_lid_timeout+0x1d/0x30
[   14.844501]  call_timer_fn+0x35/0x150
[   14.844828]  run_timer_softirq+0x1e8/0x460
[   14.845180]  ? ktime_get+0x41/0xa0
[   14.845490]  ? lapic_next_deadline+0x26/0x30
[   14.845851]  ? clockevents_program_event+0x7a/0xf0
[   14.846246]  __do_softirq+0x104/0x2ab
[   14.846572]  irq_exit+0xf1/0x100
[   14.846872]  smp_apic_timer_interrupt+0x3d/0x50
[   14.847249]  apic_timer_interrupt+0x93/0xa0
[   14.847608] RIP: 0010:cpuidle_enter_state+0x121/0x2d0
[   14.848013] RSP: 0018:ffffffff81e03df0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[   14.848618] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 000000000000001f
[   14.849151] RDX: 0000000373cf2cc5 RSI: ffff88011f2195d8 RDI: 0000000000000000
[   14.849682] RBP: ffffffff81e03e28 R08: 00000000000f41c9 R09: 0000000000000018
[   14.850214] R10: ffffffff81e03dc0 R11: 000000000007cf4d R12: ffff88011f225800
[   14.850747] R13: ffffffff81fa9c58 R14: 0000000373cf2cc5 R15: ffffffff81fa9c40
[   14.851281]  </IRQ>
[   14.851516]  cpuidle_enter+0x17/0x20
[   14.851837]  call_cpuidle+0x23/0x40
[   14.852152]  do_idle+0x189/0x1e0
[   14.852451]  cpu_startup_entry+0x1d/0x20
[   14.852791]  rest_init+0x85/0x90
[   14.853093]  start_kernel+0x3f8/0x405
[   14.853419]  ? early_idt_handler_array+0x120/0x120
[   14.853812]  x86_64_start_reservations+0x2f/0x31
[   14.854195]  x86_64_start_kernel+0x143/0x152
[   14.854557]  secondary_startup_64+0x9f/0x9f
[   14.854990] ACPI : button: The lid device is not compliant to SW_LID.
[   14.855491] timer: acpi_lid_timeout+0x0/0x30 preempt leak: 00000101 -> 00000000
[   14.856086] ------------[ cut here ]------------
[   14.856473] WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1275 call_timer_fn+0x13c/0x150
[   14.857188] Modules linked in:
[   14.857479] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.12.0-rc6-00001-gc4a9ff74 #1
[   14.858158] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   14.858818] task: ffffffff81e104c0 task.stack: ffffffff81e00000
[   14.859279] RIP: 0010:call_timer_fn+0x13c/0x150
[   14.859655] RSP: 0018:ffff88011f203e98 EFLAGS: 00010292
[   14.860073] RAX: 0000000000000043 RBX: 0000000000000001 RCX: ffffffff81e61488
[   14.860607] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[   14.861138] RBP: ffff88011f203ec0 R08: 0000000000000000 R09: 000000000000035e
[   14.861672] R10: ffffea0004714b40 R11: 000000008237d701 R12: 0000000000000101
[   14.862203] R13: ffff8800c7535990 R14: ffffffff815734e0 R15: ffff880101cb6800
[   14.862735] FS:  0000000000000000(0000) GS:ffff88011f200000(0000) knlGS:0000000000000000
[   14.863371] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   14.863819] CR2: 00007fc0dcc49267 CR3: 000000011de09000 CR4: 00000000001406f0
[   14.864354] Call Trace:
[   14.864605]  <IRQ>
[   14.864831]  run_timer_softirq+0x1e8/0x460
[   14.865185]  ? ktime_get+0x41/0xa0
[   14.865493]  ? lapic_next_deadline+0x26/0x30
[   14.865854]  ? clockevents_program_event+0x7a/0xf0
[   14.866248]  __do_softirq+0x104/0x2ab
[   14.866573]  irq_exit+0xf1/0x100
[   14.866874]  smp_apic_timer_interrupt+0x3d/0x50
[   14.867252]  apic_timer_interrupt+0x93/0xa0
[   14.867609] RIP: 0010:cpuidle_enter_state+0x121/0x2d0
[   14.868017] RSP: 0018:ffffffff81e03df0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[   14.868619] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 000000000000001f
[   14.869151] RDX: 0000000373cf2cc5 RSI: ffff88011f2195d8 RDI: 0000000000000000
[   14.869682] RBP: ffffffff81e03e28 R08: 00000000000f41c9 R09: 0000000000000018
[   14.870216] R10: ffffffff81e03dc0 R11: 000000000007cf4d R12: ffff88011f225800
[   14.870747] R13: ffffffff81fa9c58 R14: 0000000373cf2cc5 R15: ffffffff81fa9c40
[   14.871278]  </IRQ>
[   14.871513]  cpuidle_enter+0x17/0x20
[   14.871831]  call_cpuidle+0x23/0x40
[   14.872143]  do_idle+0x189/0x1e0
[   14.872443]  cpu_startup_entry+0x1d/0x20
[   14.872783]  rest_init+0x85/0x90
[   14.873083]  start_kernel+0x3f8/0x405
[   14.873411]  ? early_idt_handler_array+0x120/0x120
[   14.873807]  x86_64_start_reservations+0x2f/0x31
[   14.874192]  x86_64_start_kernel+0x143/0x152
[   14.874554]  secondary_startup_64+0x9f/0x9f
[   14.874910] Code: 03 48 85 c0 75 eb 65 ff 0d e2 9f f1 7e e9 0c ff ff ff 44 89 e2 4c 89 f6 48 c7 c7 08 5d ca 81 c6 05 d1 24 e2 00 01 e8 81 66 0a 00 <0f> ff e9 16 ff ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 
[   14.876305] ---[ end trace dfc99d55faf65cc8 ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Xiaolong

[-- Attachment #2: config-4.12.0-rc6-00001-gc4a9ff74 --]
[-- Type: text/plain, Size: 159327 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.12.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_INTEL_RDT_A=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#
# CONFIG_VMD is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_RT is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
# CONFIG_NFT_SET_BITMAP is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NFT_FIB_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
# CONFIG_NFT_FIB_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_RAM_DAX is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=m
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VX855 is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_SPI is not set
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
# CONFIG_HDMI_LPE_AUDIO is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_GHES is not set
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TSCPAGE=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_TCPM is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_WMI is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_SURFACE3_WMI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_CHT_INT33FE is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_RAS_CEC is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
CONFIG_UEFI_CPER=y
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_MEMTEST is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 7137 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='netperf'
	export testcase='netperf'
	export category='benchmark'
	export disable_latency_stats=1
	export set_nic_irq_affinity=1
	export ip='ipv4'
	export runtime=300
	export nr_threads=1
	export cluster='cs-localhost'
	export job_origin='/lkp/lkp/.src-20170627-171455/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml'
	export queue='bisect'
	export testbox='lkp-u410'
	export tbox_group='lkp-u410'
	export submit_id='5954a7830b9a93fe79aef76d'
	export job_file='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml'
	export id='afdee65cca4b30282413722b9d8b48df20841e1f'
	export model='Ivy Bridge'
	export nr_cpu=4
	export memory='4G'
	export nr_hdd_partitions=0
	export hdd_partitions=
	export netconsole_port=6674
	export brand='Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'
	export commit='c4a9ff748c1ca2fe81e012ac32e1daa70702778b'
	export kconfig='x86_64-rhel-7.2'
	export compiler='gcc-6'
	export rootfs='debian-x86_64-2016-08-31.cgz'
	export enqueue_time='2017-06-29 15:08:52 +0800'
	export _id='5954a7830b9a93fe79aef76d'
	export _rt='/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b'
	export user='lkp'
	export head_commit='6d347c405fc4a2fee6aede857b9c764f2299ecfa'
	export base_commit='c0bc126f97fb929b3ae02c1c62322645d70eb408'
	export branch='linux-devel/devel-hourly-2017062713'
	export result_root='/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.2
branch=linux-devel/devel-hourly-2017062713
commit=c4a9ff748c1ca2fe81e012ac32e1daa70702778b
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74
max_uptime=1500
RESULT_ROOT=/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74'
	export dequeue_time='2017-06-29 15:35:37 +0800'
	export node_roles='server client'
	export job_initrd='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper iostat
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
	run_monitor $LKP_SRC/monitors/wrapper proc-stat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper slabinfo
	run_monitor $LKP_SRC/monitors/wrapper interrupts
	run_monitor $LKP_SRC/monitors/wrapper lock_stat
	run_monitor $LKP_SRC/monitors/wrapper latency_stats
	run_monitor $LKP_SRC/monitors/wrapper softirqs
	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
	run_monitor $LKP_SRC/monitors/wrapper diskstats
	run_monitor $LKP_SRC/monitors/wrapper nfsstat
	run_monitor $LKP_SRC/monitors/wrapper cpuidle
	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
	run_monitor $LKP_SRC/monitors/wrapper turbostat
	run_monitor $LKP_SRC/monitors/wrapper sched_debug
	run_monitor $LKP_SRC/monitors/wrapper perf-stat
	run_monitor $LKP_SRC/monitors/wrapper mpstat
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	if role server
	then
		start_daemon $LKP_SRC/daemon/netserver
	fi

	if role client
	then
		run_test test='TCP_CRR' $LKP_SRC/tests/wrapper netperf
	fi
}

extract_stats()
{
	$LKP_SRC/stats/wrapper netperf
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper iostat
	$LKP_SRC/stats/wrapper vmstat
	$LKP_SRC/stats/wrapper numa-numastat
	$LKP_SRC/stats/wrapper numa-vmstat
	$LKP_SRC/stats/wrapper numa-meminfo
	$LKP_SRC/stats/wrapper proc-vmstat
	$LKP_SRC/stats/wrapper meminfo
	$LKP_SRC/stats/wrapper slabinfo
	$LKP_SRC/stats/wrapper interrupts
	$LKP_SRC/stats/wrapper lock_stat
	$LKP_SRC/stats/wrapper latency_stats
	$LKP_SRC/stats/wrapper softirqs
	$LKP_SRC/stats/wrapper diskstats
	$LKP_SRC/stats/wrapper nfsstat
	$LKP_SRC/stats/wrapper cpuidle
	$LKP_SRC/stats/wrapper turbostat
	$LKP_SRC/stats/wrapper sched_debug
	$LKP_SRC/stats/wrapper perf-stat
	$LKP_SRC/stats/wrapper mpstat
	$LKP_SRC/stats/wrapper perf-profile

	$LKP_SRC/stats/wrapper time netperf.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 21552 bytes --]

[-- Attachment #5: netperf.ksh --]
[-- Type: text/plain, Size: 544 bytes --]

2017-06-29 15:37:39 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-29 15:37:39 wait
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  15411.39   32.40  32.41  84.101  84.132
16384  87380 

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 4667 bytes --]

---

#! jobs/netperf.yaml
suite: netperf
testcase: netperf
category: benchmark

# upto 90% CPU cycles may be used by latency stats
disable_latency_stats: 1
set_nic_irq_affinity: 1
ip: ipv4
runtime: 300s
nr_threads: 1
cluster: cs-localhost
if role server:
  netserver: 
if role client:
  netperf:
    test: TCP_CRR
job_origin: "/lkp/lkp/.src-20170627-171455/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml"

#! queue options
queue: bisect
testbox: lkp-u410
tbox_group: lkp-u410
submit_id: 5954a7830b9a93fe79aef76d
job_file: "/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml"
id: afdee65cca4b30282413722b9d8b48df20841e1f

#! hosts/lkp-u410
model: Ivy Bridge
nr_cpu: 4
memory: 4G
nr_hdd_partitions: 0
hdd_partitions: 
netconsole_port: 6674
brand: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz

#! include/category/benchmark
kmsg: 
iostat: 
heartbeat: 
vmstat: 
numa-numastat: 
numa-vmstat: 
numa-meminfo: 
proc-vmstat: 
proc-stat: 
meminfo: 
slabinfo: 
interrupts: 
lock_stat: 
latency_stats: 
softirqs: 
bdi_dev_mapping: 
diskstats: 
nfsstat: 
cpuidle: 
cpufreq-stats: 
turbostat: 
sched_debug: 
perf-stat: 
mpstat: 
perf-profile: 

#! include/category/ALL
cpufreq_governor: performance

#! include/queue/cyclic
commit: c4a9ff748c1ca2fe81e012ac32e1daa70702778b

#! default params
kconfig: x86_64-rhel-7.2
compiler: gcc-6
rootfs: debian-x86_64-2016-08-31.cgz
enqueue_time: 2017-06-29 15:08:52.572029741 +08:00
_id: 5954a7830b9a93fe79aef76d
_rt: "/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b"

#! schedule options
user: lkp
head_commit: 6d347c405fc4a2fee6aede857b9c764f2299ecfa
base_commit: c0bc126f97fb929b3ae02c1c62322645d70eb408
branch: linux-devel/devel-hourly-2017062713
result_root: "/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0"
LKP_SERVER: inn
max_uptime: 1500
initrd: "/osimage/debian/debian-x86_64-2016-08-31.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-7.2
- branch=linux-devel/devel-hourly-2017062713
- commit=c4a9ff748c1ca2fe81e012ac32e1daa70702778b
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74
- max_uptime=1500
- RESULT_ROOT=/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0
- LKP_SERVER=inn
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- console=tty0
- vga=normal
- rw
lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz"
modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/modules.cgz"
bm_initrd: "/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz"
site: inn

#! /lkp/lkp/.src-20170627-180606/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 
nfs-hang: 

#! runtime status

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74"
dequeue_time: 2017-06-29 15:35:37.239279421 +08:00

#! /lkp/lkp/.src-20170629-145157/include/site/inn
job_state: finished
loadavg: '1.06'

[-- Attachment #7: reproduce.ksh --]
[-- Type: text/plain, Size: 328 bytes --]


for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
	online_file="$cpu_dir"/online
	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue

	file="$cpu_dir"/cpufreq/scaling_governor
	[ -f "$file" ] && echo "$scaling_governor" > "$file"
done

netserver -4
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
wait

[lkp-robot] [ACPI] c4a9ff748c: BUG:scheduling_while_atomic

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 15725 bytes --]


FYI, we noticed the following commit:

commit: c4a9ff748c1ca2fe81e012ac32e1daa70702778b ("ACPI: button: Add a workaround to fix an order issue for old userspace")
url: https://github.com/0day-ci/linux/commits/Lv-Zheng/ACPI-button-Fix-button-lid_init_state-method-mode/20170622-143854


in testcase: netperf
with following parameters:

	ip: ipv4
	runtime: 300s
	nr_threads: 1
	cluster: cs-localhost
	test: TCP_CRR
	cpufreq_governor: performance

test-description: Netperf is a benchmark that can be use to measure various aspect of networking performance.
test-url: http://www.netperf.org/netperf/


on test machine: 4 threads Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz with 4G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+-----------------------------------------------------------------------------------------------------+-----------+------------+
|                                                                                                     | v4.12-rc6 | c4a9ff748c |
+-----------------------------------------------------------------------------------------------------+-----------+------------+
| boot_successes                                                                                      | 9404      | 3          |
| boot_failures                                                                                       | 2560      | 9          |
| ACPI_Error:Field[CPB3]at#exceeds_Buffer[NULL]size#(bits)(#/dsopcode-#)                              | 365       |            |
| ACPI_Error:Method_parse/execution_failed[~_SB._OSC](Node#),AE_AML_BUFFER_LIMIT(#/psparse-#)         | 365       |            |
| cpu_clock_throttled                                                                                 | 362       |            |
| Kernel_panic-not_syncing:Fatal_hardware_error                                                       | 2         |            |
| Mem-Info                                                                                            | 560       |            |
| invoked_oom-killer:gfp_mask=0x                                                                      | 528       |            |
| Out_of_memory:Kill_process                                                                          | 80        |            |
| BUG:Bad_page_state_in_process                                                                       | 25        |            |
| BUG:Bad_rss-counter_state_mm:#idx:#val                                                              | 18        |            |
| BUG:Bad_page_map_in_process                                                                         | 7         |            |
| page_allocation_failure:order:#,mode:#(GFP_ATOMIC|__GFP_COMP|__GFP_NOTRACK),nodemask=(null)         | 3         |            |
| WARNING:at_lib/list_debug.c:#__list_add_valid                                                       | 2         |            |
| INFO:rcu_sched_detected_stalls_on_CPUs/tasks                                                        | 2         |            |
| BUG:Bad_page_state:#messages_suppressed                                                             | 1         |            |
| WARNING:at_drivers/gpu/drm/drm_irq.c:#drm_wait_one_vblank[drm]                                      | 19        |            |
| WARNING:at_lib/list_debug.c:#__list_del_entry_valid                                                 | 2         |            |
| general_protection_fault:#[##]                                                                      | 2         |            |
| Kernel_panic-not_syncing:Fatal_exception                                                            | 3         |            |
| page_allocation_failure:order:#,mode:#(GFP_ATOMIC|__GFP_COMP|__GFP_ZERO),nodemask=(null)            | 18        |            |
| WARNING:at_drivers/gpu/drm/drm_vblank.c:#drm_wait_one_vblank[drm]                                   | 5         |            |
| page_allocation_failure:order:#,mode:#(GFP_KERNEL|__GFP_NORETRY),nodemask=(null)                    | 11        |            |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/rwsem.c                         | 4         |            |
| BUG:non-zero_nr_ptes_on_freeing_mm                                                                  | 13        |            |
| ACPI_Error:Field[CPB3]at_bit_offset/length#exceeds_size_of_target_Buffer(#bits)(#/dsopcode-#)       | 116       |            |
| ACPI_Error:Method_parse/execution_failed~_SB._OSC,AE_AML_BUFFER_LIMIT(#/psparse-#)                  | 116       |            |
| ACPI_Error:Method_parse/execution_failed~_SB.PC00.IOTR._CRS,AE_AML_NO_RESOURCE_END_TAG(#/psparse-#) | 129       |            |
| ACPI_Error:Method_execution_failed~_SB.PC00.IOTR._CRS,AE_AML_NO_RESOURCE_END_TAG(#/uteval-#)        | 129       |            |
| Kernel_panic-not_syncing:Hard_LOCKUP                                                                | 103       |            |
| Kernel_panic-not_syncing:Attempted_to_kill_init!exitcode=                                           | 20        |            |
| ACPI_Error:[~_SB_.PCI0.XHC_.RHUB.HS11]Namespace_lookup_failure,AE_NOT_FOUND(#/dswload-#)            | 15        |            |
| ACPI_Error:#table_load_failures,#successful(#/tbxfload-#)                                           | 15        |            |
| WARNING:at_drivers/gpu/drm/i915/intel_display.c:#intel_modeset_init[i915]                           | 259       | 9          |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/mutex.c                         | 3         | 1          |
| INFO:creating/lkp/benchmarks/ltp/output_directory                                                   | 351       |            |
| INFO:creating/lkp/benchmarks/ltp/results_directory                                                  | 351       |            |
| INFO:ltp-pan_reported_some_tests_FAIL                                                               | 88        |            |
| INFO:ltp-pan_reported_all_tests_PASS                                                                | 208       |            |
| page_allocation_failure:order:#,mode:#(GFP_HIGHUSER_MOVABLE|__GFP_ZERO),nodemask=(null)             | 2         |            |
| WARNING:at_kernel/events/core.c:#add_event_to_ctx                                                   | 5         |            |
| WARNING:at_kernel/events/core.c:#event_sched_out                                                    | 5         |            |
| BUG:sleeping_function_called_from_invalid_context_at_kernel/irq/manage.c                            | 1         |            |
| calltrace:init_netconsole                                                                           | 1         |            |
| calltrace:SyS_finit_module                                                                          | 2         |            |
| calltrace:SyS_write                                                                                 | 1         |            |
| BUG:unable_to_handle_kernel                                                                         | 1         |            |
| Oops:#[##]                                                                                          | 1         |            |
| WARNING:at_fs/sysfs/dir.c:#sysfs_warn_dup                                                           | 1         |            |
| calltrace:parport_pc_init                                                                           | 1         |            |
| WARNING:at_lib/kobject.c:#kobject_add_internal                                                      | 1         |            |
| Kernel_panic-not_syncing:Out_of_memory_and_no_killable_processes                                    | 447       |            |
| BUG:kernel_hang_in_test_stage                                                                       | 263       |            |
| BUG:soft_lockup-CPU##stuck_for#s                                                                    | 1         |            |
| Kernel_panic-not_syncing:softlockup:hung_tasks                                                      | 1         |            |
| BUG:kernel_reboot-without-warning_in_boot_stage                                                     | 1         |            |
| BUG:kernel_reboot-without-warning_in_test_stage                                                     | 12        |            |
| WARNING:at_kernel/workqueue.c:#process_one_work                                                     | 1         |            |
| BUG:scheduling_while_atomic                                                                         | 0         | 8          |
| WARNING:at_kernel/time/timer.c:#call_timer_fn                                                       | 0         | 8          |
+-----------------------------------------------------------------------------------------------------+-----------+------------+



[   14.828015] BUG: scheduling while atomic: swapper/0/0/0x00000102
[   14.828552] Modules linked in:
[   14.828846] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.12.0-rc6-00001-gc4a9ff74 #1
[   14.829454] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   14.830113] Call Trace:
[   14.830363]  <IRQ>
[   14.831578]  dump_stack+0x63/0x86
[   14.831887]  __schedule_bug+0x54/0x70
[   14.832212]  __schedule+0x633/0x850
[   14.832530]  schedule+0x3d/0x90
[   14.832826]  schedule_timeout+0x174/0x310
[   14.833176]  ? call_timer_fn+0x150/0x150
[   14.833518]  ec_guard+0x1c6/0x1d0
[   14.833821]  ? ec_guard+0x1c6/0x1d0
[   14.834135]  ? remove_wait_queue+0x70/0x70
[   14.834487]  acpi_ec_transaction+0x181/0x3b0
[   14.834850]  acpi_ec_read+0x42/0x50
[   14.835166]  acpi_ec_space_handler+0xa5/0x240
[   14.835534]  ? __update_load_avg_se+0x15b/0x180
[   14.835955]  ? acpi_os_signal_semaphore+0x4d/0x90
[   14.836345]  ? acpi_ut_release_mutex+0x11c/0x127
[   14.836727]  acpi_ev_address_space_dispatch+0x2ce/0x33a
[   14.837147]  ? ec_transaction+0x50/0x50
[   14.837483]  acpi_ex_access_region+0x414/0x4ca
[   14.837858]  ? __might_sleep+0x4a/0x80
[   14.838187]  acpi_ex_field_datum_io+0x178/0x3fa
[   14.838564]  acpi_ex_extract_from_field+0x151/0x2bb
[   14.838964]  acpi_ex_read_data_from_field+0x380/0x3d0
[   14.839374]  acpi_ex_resolve_node_to_value+0x326/0x443
[   14.839790]  acpi_ex_resolve_to_value+0x374/0x40e
[   14.840179]  acpi_ds_evaluate_name_path+0xa3/0x143
[   14.840573]  acpi_ds_exec_end_op+0xd1/0x6c6
[   14.840930]  acpi_ps_parse_loop+0x819/0x8b5
[   14.841287]  ? acpi_ut_trace+0x26/0x66
[   14.841617]  acpi_ps_parse_aml+0x1ac/0x4a1
[   14.841968]  acpi_ps_execute_method+0x1f4/0x2b6
[   14.842349]  acpi_ns_evaluate+0x2ee/0x435
[   14.842696]  acpi_evaluate_object+0x178/0x38e
[   14.843065]  ? acpi_lid_update_state+0x50/0x50
[   14.843439]  acpi_evaluate_integer+0x3e/0xd0
[   14.843802]  acpi_lid_update_state+0x27/0x50
[   14.844164]  acpi_lid_timeout+0x1d/0x30
[   14.844501]  call_timer_fn+0x35/0x150
[   14.844828]  run_timer_softirq+0x1e8/0x460
[   14.845180]  ? ktime_get+0x41/0xa0
[   14.845490]  ? lapic_next_deadline+0x26/0x30
[   14.845851]  ? clockevents_program_event+0x7a/0xf0
[   14.846246]  __do_softirq+0x104/0x2ab
[   14.846572]  irq_exit+0xf1/0x100
[   14.846872]  smp_apic_timer_interrupt+0x3d/0x50
[   14.847249]  apic_timer_interrupt+0x93/0xa0
[   14.847608] RIP: 0010:cpuidle_enter_state+0x121/0x2d0
[   14.848013] RSP: 0018:ffffffff81e03df0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[   14.848618] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 000000000000001f
[   14.849151] RDX: 0000000373cf2cc5 RSI: ffff88011f2195d8 RDI: 0000000000000000
[   14.849682] RBP: ffffffff81e03e28 R08: 00000000000f41c9 R09: 0000000000000018
[   14.850214] R10: ffffffff81e03dc0 R11: 000000000007cf4d R12: ffff88011f225800
[   14.850747] R13: ffffffff81fa9c58 R14: 0000000373cf2cc5 R15: ffffffff81fa9c40
[   14.851281]  </IRQ>
[   14.851516]  cpuidle_enter+0x17/0x20
[   14.851837]  call_cpuidle+0x23/0x40
[   14.852152]  do_idle+0x189/0x1e0
[   14.852451]  cpu_startup_entry+0x1d/0x20
[   14.852791]  rest_init+0x85/0x90
[   14.853093]  start_kernel+0x3f8/0x405
[   14.853419]  ? early_idt_handler_array+0x120/0x120
[   14.853812]  x86_64_start_reservations+0x2f/0x31
[   14.854195]  x86_64_start_kernel+0x143/0x152
[   14.854557]  secondary_startup_64+0x9f/0x9f
[   14.854990] ACPI : button: The lid device is not compliant to SW_LID.
[   14.855491] timer: acpi_lid_timeout+0x0/0x30 preempt leak: 00000101 -> 00000000
[   14.856086] ------------[ cut here ]------------
[   14.856473] WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1275 call_timer_fn+0x13c/0x150
[   14.857188] Modules linked in:
[   14.857479] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.12.0-rc6-00001-gc4a9ff74 #1
[   14.858158] Hardware name: LENOVO IdeaPad U410    /Lenovo          , BIOS 65CN15WW 06/05/2012
[   14.858818] task: ffffffff81e104c0 task.stack: ffffffff81e00000
[   14.859279] RIP: 0010:call_timer_fn+0x13c/0x150
[   14.859655] RSP: 0018:ffff88011f203e98 EFLAGS: 00010292
[   14.860073] RAX: 0000000000000043 RBX: 0000000000000001 RCX: ffffffff81e61488
[   14.860607] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[   14.861138] RBP: ffff88011f203ec0 R08: 0000000000000000 R09: 000000000000035e
[   14.861672] R10: ffffea0004714b40 R11: 000000008237d701 R12: 0000000000000101
[   14.862203] R13: ffff8800c7535990 R14: ffffffff815734e0 R15: ffff880101cb6800
[   14.862735] FS:  0000000000000000(0000) GS:ffff88011f200000(0000) knlGS:0000000000000000
[   14.863371] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   14.863819] CR2: 00007fc0dcc49267 CR3: 000000011de09000 CR4: 00000000001406f0
[   14.864354] Call Trace:
[   14.864605]  <IRQ>
[   14.864831]  run_timer_softirq+0x1e8/0x460
[   14.865185]  ? ktime_get+0x41/0xa0
[   14.865493]  ? lapic_next_deadline+0x26/0x30
[   14.865854]  ? clockevents_program_event+0x7a/0xf0
[   14.866248]  __do_softirq+0x104/0x2ab
[   14.866573]  irq_exit+0xf1/0x100
[   14.866874]  smp_apic_timer_interrupt+0x3d/0x50
[   14.867252]  apic_timer_interrupt+0x93/0xa0
[   14.867609] RIP: 0010:cpuidle_enter_state+0x121/0x2d0
[   14.868017] RSP: 0018:ffffffff81e03df0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[   14.868619] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 000000000000001f
[   14.869151] RDX: 0000000373cf2cc5 RSI: ffff88011f2195d8 RDI: 0000000000000000
[   14.869682] RBP: ffffffff81e03e28 R08: 00000000000f41c9 R09: 0000000000000018
[   14.870216] R10: ffffffff81e03dc0 R11: 000000000007cf4d R12: ffff88011f225800
[   14.870747] R13: ffffffff81fa9c58 R14: 0000000373cf2cc5 R15: ffffffff81fa9c40
[   14.871278]  </IRQ>
[   14.871513]  cpuidle_enter+0x17/0x20
[   14.871831]  call_cpuidle+0x23/0x40
[   14.872143]  do_idle+0x189/0x1e0
[   14.872443]  cpu_startup_entry+0x1d/0x20
[   14.872783]  rest_init+0x85/0x90
[   14.873083]  start_kernel+0x3f8/0x405
[   14.873411]  ? early_idt_handler_array+0x120/0x120
[   14.873807]  x86_64_start_reservations+0x2f/0x31
[   14.874192]  x86_64_start_kernel+0x143/0x152
[   14.874554]  secondary_startup_64+0x9f/0x9f
[   14.874910] Code: 03 48 85 c0 75 eb 65 ff 0d e2 9f f1 7e e9 0c ff ff ff 44 89 e2 4c 89 f6 48 c7 c7 08 5d ca 81 c6 05 d1 24 e2 00 01 e8 81 66 0a 00 <0f> ff e9 16 ff ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 
[   14.876305] ---[ end trace dfc99d55faf65cc8 ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Xiaolong

[-- Attachment #2: config-4.12.0-rc6-00001-gc4a9ff74 --]
[-- Type: text/plain, Size: 159327 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.12.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_INTEL_RDT_A=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#
# CONFIG_VMD is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_RT is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
# CONFIG_NFT_SET_BITMAP is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NFT_FIB_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
# CONFIG_NFT_FIB_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_RAM_DAX is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=m
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VX855 is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_SPI is not set
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
# CONFIG_HDMI_LPE_AUDIO is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_GHES is not set
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TSCPAGE=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_TCPM is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_WMI is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_SURFACE3_WMI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_CHT_INT33FE is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_RAS_CEC is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_NVMEM=m
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
CONFIG_UEFI_CPER=y
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_MEMTEST is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 7137 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='netperf'
	export testcase='netperf'
	export category='benchmark'
	export disable_latency_stats=1
	export set_nic_irq_affinity=1
	export ip='ipv4'
	export runtime=300
	export nr_threads=1
	export cluster='cs-localhost'
	export job_origin='/lkp/lkp/.src-20170627-171455/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml'
	export queue='bisect'
	export testbox='lkp-u410'
	export tbox_group='lkp-u410'
	export submit_id='5954a7830b9a93fe79aef76d'
	export job_file='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml'
	export id='afdee65cca4b30282413722b9d8b48df20841e1f'
	export model='Ivy Bridge'
	export nr_cpu=4
	export memory='4G'
	export nr_hdd_partitions=0
	export hdd_partitions=
	export netconsole_port=6674
	export brand='Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz'
	export commit='c4a9ff748c1ca2fe81e012ac32e1daa70702778b'
	export kconfig='x86_64-rhel-7.2'
	export compiler='gcc-6'
	export rootfs='debian-x86_64-2016-08-31.cgz'
	export enqueue_time='2017-06-29 15:08:52 +0800'
	export _id='5954a7830b9a93fe79aef76d'
	export _rt='/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b'
	export user='lkp'
	export head_commit='6d347c405fc4a2fee6aede857b9c764f2299ecfa'
	export base_commit='c0bc126f97fb929b3ae02c1c62322645d70eb408'
	export branch='linux-devel/devel-hourly-2017062713'
	export result_root='/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.2
branch=linux-devel/devel-hourly-2017062713
commit=c4a9ff748c1ca2fe81e012ac32e1daa70702778b
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74
max_uptime=1500
RESULT_ROOT=/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74'
	export dequeue_time='2017-06-29 15:35:37 +0800'
	export node_roles='server client'
	export job_initrd='/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper iostat
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
	run_monitor $LKP_SRC/monitors/wrapper proc-stat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper slabinfo
	run_monitor $LKP_SRC/monitors/wrapper interrupts
	run_monitor $LKP_SRC/monitors/wrapper lock_stat
	run_monitor $LKP_SRC/monitors/wrapper latency_stats
	run_monitor $LKP_SRC/monitors/wrapper softirqs
	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
	run_monitor $LKP_SRC/monitors/wrapper diskstats
	run_monitor $LKP_SRC/monitors/wrapper nfsstat
	run_monitor $LKP_SRC/monitors/wrapper cpuidle
	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
	run_monitor $LKP_SRC/monitors/wrapper turbostat
	run_monitor $LKP_SRC/monitors/wrapper sched_debug
	run_monitor $LKP_SRC/monitors/wrapper perf-stat
	run_monitor $LKP_SRC/monitors/wrapper mpstat
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	if role server
	then
		start_daemon $LKP_SRC/daemon/netserver
	fi

	if role client
	then
		run_test test='TCP_CRR' $LKP_SRC/tests/wrapper netperf
	fi
}

extract_stats()
{
	$LKP_SRC/stats/wrapper netperf
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper iostat
	$LKP_SRC/stats/wrapper vmstat
	$LKP_SRC/stats/wrapper numa-numastat
	$LKP_SRC/stats/wrapper numa-vmstat
	$LKP_SRC/stats/wrapper numa-meminfo
	$LKP_SRC/stats/wrapper proc-vmstat
	$LKP_SRC/stats/wrapper meminfo
	$LKP_SRC/stats/wrapper slabinfo
	$LKP_SRC/stats/wrapper interrupts
	$LKP_SRC/stats/wrapper lock_stat
	$LKP_SRC/stats/wrapper latency_stats
	$LKP_SRC/stats/wrapper softirqs
	$LKP_SRC/stats/wrapper diskstats
	$LKP_SRC/stats/wrapper nfsstat
	$LKP_SRC/stats/wrapper cpuidle
	$LKP_SRC/stats/wrapper turbostat
	$LKP_SRC/stats/wrapper sched_debug
	$LKP_SRC/stats/wrapper perf-stat
	$LKP_SRC/stats/wrapper mpstat
	$LKP_SRC/stats/wrapper perf-profile

	$LKP_SRC/stats/wrapper time netperf.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 21552 bytes --]

[-- Attachment #5: netperf --]
[-- Type: text/plain, Size: 544 bytes --]

2017-06-29 15:37:39 netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
2017-06-29 15:37:39 wait
MIGRATED TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.1 () port 0 AF_INET : demo
Local /Remote
Socket Size   Request Resp.  Elapsed Trans.   CPU    CPU    S.dem   S.dem
Send   Recv   Size    Size   Time    Rate     local  remote local   remote
bytes  bytes  bytes   bytes  secs.   per sec  %      %      us/Tr   us/Tr

16384  87380  1       1      300.00  15411.39   32.40  32.41  84.101  84.132
16384  87380 

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 4667 bytes --]

---

#! jobs/netperf.yaml
suite: netperf
testcase: netperf
category: benchmark

# upto 90% CPU cycles may be used by latency stats
disable_latency_stats: 1
set_nic_irq_affinity: 1
ip: ipv4
runtime: 300s
nr_threads: 1
cluster: cs-localhost
if role server:
  netserver: 
if role client:
  netperf:
    test: TCP_CRR
job_origin: "/lkp/lkp/.src-20170627-171455/allot/cyclic:linux-devel:devel-hourly/lkp-u410/netperf.yaml"

#! queue options
queue: bisect
testbox: lkp-u410
tbox_group: lkp-u410
submit_id: 5954a7830b9a93fe79aef76d
job_file: "/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml"
id: afdee65cca4b30282413722b9d8b48df20841e1f

#! hosts/lkp-u410
model: Ivy Bridge
nr_cpu: 4
memory: 4G
nr_hdd_partitions: 0
hdd_partitions: 
netconsole_port: 6674
brand: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz

#! include/category/benchmark
kmsg: 
iostat: 
heartbeat: 
vmstat: 
numa-numastat: 
numa-vmstat: 
numa-meminfo: 
proc-vmstat: 
proc-stat: 
meminfo: 
slabinfo: 
interrupts: 
lock_stat: 
latency_stats: 
softirqs: 
bdi_dev_mapping: 
diskstats: 
nfsstat: 
cpuidle: 
cpufreq-stats: 
turbostat: 
sched_debug: 
perf-stat: 
mpstat: 
perf-profile: 

#! include/category/ALL
cpufreq_governor: performance

#! include/queue/cyclic
commit: c4a9ff748c1ca2fe81e012ac32e1daa70702778b

#! default params
kconfig: x86_64-rhel-7.2
compiler: gcc-6
rootfs: debian-x86_64-2016-08-31.cgz
enqueue_time: 2017-06-29 15:08:52.572029741 +08:00
_id: 5954a7830b9a93fe79aef76d
_rt: "/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b"

#! schedule options
user: lkp
head_commit: 6d347c405fc4a2fee6aede857b9c764f2299ecfa
base_commit: c0bc126f97fb929b3ae02c1c62322645d70eb408
branch: linux-devel/devel-hourly-2017062713
result_root: "/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0"
LKP_SERVER: inn
max_uptime: 1500
initrd: "/osimage/debian/debian-x86_64-2016-08-31.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/scheduled/lkp-u410/netperf-ipv4-300s-1-cs-localhost-TCP_CRR-performance-debian-x86_64-2016-08-31.cgz-c4a9ff748c1ca2fe81e012ac32e1daa70702778b-20170629-65145-1cxj6yl-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-7.2
- branch=linux-devel/devel-hourly-2017062713
- commit=c4a9ff748c1ca2fe81e012ac32e1daa70702778b
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74
- max_uptime=1500
- RESULT_ROOT=/result/netperf/ipv4-300s-1-cs-localhost-TCP_CRR-performance/lkp-u410/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/0
- LKP_SERVER=inn
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- console=tty0
- vga=normal
- rw
lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz"
modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/modules.cgz"
bm_initrd: "/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/netperf_2017-04-26.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/netperf-x86_64_2017-04-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-06-03.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-c531577bcdac_2017-06-03.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/cluster_2016-11-24.cgz"
site: inn

#! /lkp/lkp/.src-20170627-180606/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 
nfs-hang: 

#! runtime status

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-6/c4a9ff748c1ca2fe81e012ac32e1daa70702778b/vmlinuz-4.12.0-rc6-00001-gc4a9ff74"
dequeue_time: 2017-06-29 15:35:37.239279421 +08:00

#! /lkp/lkp/.src-20170629-145157/include/site/inn
job_state: finished
loadavg: '1.06'

[-- Attachment #7: reproduce --]
[-- Type: text/plain, Size: 328 bytes --]


for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
	online_file="$cpu_dir"/online
	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue

	file="$cpu_dir"/cpufreq/scaling_governor
	[ -f "$file" ] && echo "$scaling_governor" > "$file"
done

netserver -4
netperf -4 -t TCP_CRR -c -C -l 300  -H 127.0.0.1 &
wait

[RFC PATCH v6 2/5] ACPI: button: Add an optional workaround to fix an event missing issue for old userspace

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, all cases work fine with systemd 233, but only case 1,2 work
fine with systemd 229.

Case 3,4 can be treated as an event missing issue:
   After seeing a LID "close" event, systemd 229 will wait several seconds
   (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
   platforms, if users close lid, and re-open it during the
   HoldoffTimeoutSec period, there is still no "open" events seen by the
   userspace. Thus systemd still considers the last state as "close" and
   suspends the platform after the HoldoffTimeoutSec times out.

Note that not only systemd 229, desktop managers (ex.,
gnome-settings-daemon) also suffer from this issue.

This patch tries to fix this issue by periodically sending _LID return
value to userspace, which ensures to trigger a SW_LID event when the
underlying hardware state has changed. As adding a periodic timer is not a
power friendly way, this patch prepares an option for users to enable on
failure platforms for old userspace programs.

Users can configure update interval via button.lid_update_interval.
This should be configured to a smaller value than HoldoffTimeoutSec in
/etc/systemd/logind.conf.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 67a0d78..a8b119e 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -126,6 +126,14 @@ static unsigned long lid_notify_timeout __read_mostly = 10;
 module_param(lid_notify_timeout, ulong, 0644);
 MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
 
+static bool lid_periodic_update __read_mostly = false;
+module_param(lid_periodic_update, bool, 0644);
+MODULE_PARM_DESC(lid_periodic_update, "Periodically sending lid state updates");
+
+static unsigned long lid_update_interval __read_mostly = 1 * MSEC_PER_SEC;
+module_param(lid_update_interval, ulong, 0644);
+MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid periodic updates");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -395,6 +403,8 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		(void)acpi_lid_update_state(device);
+		if (lid_periodic_update)
+			acpi_lid_start_timer(device, lid_update_interval);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -560,8 +570,11 @@ static int acpi_button_add(struct acpi_device *device)
 		 * more we only care about the last one...
 		 */
 		lid_device = device;
-		acpi_lid_start_timer(device,
-			lid_notify_timeout * MSEC_PER_SEC);
+		if (lid_periodic_update)
+			acpi_lid_initialize_state(device);
+		else
+			acpi_lid_start_timer(device,
+				lid_notify_timeout * MSEC_PER_SEC);
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v6 2/5] ACPI: button: Add an optional workaround to fix an event missing issue for old userspace

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, all cases work fine with systemd 233, but only case 1,2 work
fine with systemd 229.

Case 3,4 can be treated as an event missing issue:
   After seeing a LID "close" event, systemd 229 will wait several seconds
   (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
   platforms, if users close lid, and re-open it during the
   HoldoffTimeoutSec period, there is still no "open" events seen by the
   userspace. Thus systemd still considers the last state as "close" and
   suspends the platform after the HoldoffTimeoutSec times out.

Note that not only systemd 229, desktop managers (ex.,
gnome-settings-daemon) also suffer from this issue.

This patch tries to fix this issue by periodically sending _LID return
value to userspace, which ensures to trigger a SW_LID event when the
underlying hardware state has changed. As adding a periodic timer is not a
power friendly way, this patch prepares an option for users to enable on
failure platforms for old userspace programs.

Users can configure update interval via button.lid_update_interval.
This should be configured to a smaller value than HoldoffTimeoutSec in
/etc/systemd/logind.conf.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 67a0d78..a8b119e 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -126,6 +126,14 @@ static unsigned long lid_notify_timeout __read_mostly = 10;
 module_param(lid_notify_timeout, ulong, 0644);
 MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
 
+static bool lid_periodic_update __read_mostly = false;
+module_param(lid_periodic_update, bool, 0644);
+MODULE_PARM_DESC(lid_periodic_update, "Periodically sending lid state updates");
+
+static unsigned long lid_update_interval __read_mostly = 1 * MSEC_PER_SEC;
+module_param(lid_update_interval, ulong, 0644);
+MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid periodic updates");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -395,6 +403,8 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		(void)acpi_lid_update_state(device);
+		if (lid_periodic_update)
+			acpi_lid_start_timer(device, lid_update_interval);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -560,8 +570,11 @@ static int acpi_button_add(struct acpi_device *device)
 		 * more we only care about the last one...
 		 */
 		lid_device = device;
-		acpi_lid_start_timer(device,
-			lid_notify_timeout * MSEC_PER_SEC);
+		if (lid_periodic_update)
+			acpi_lid_initialize_state(device);
+		else
+			acpi_lid_start_timer(device,
+				lid_notify_timeout * MSEC_PER_SEC);
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
-- 
2.7.4

Re: [RFC PATCH v6 2/5] ACPI: button: Add an optional workaround to fix an event missing issue for old userspace

[Benjamin Tissoires]

On Jun 21 2017 or thereabouts, Lv Zheng wrote:
> There are platform variations implementing ACPI lid device in different
> ways:
> 1. Some platforms send "open" events to OS and the events arrive before
>    button driver is resumed;
> 2. Some platforms send "open" events to OS, but the events arrive after
>    button driver is resumed, ex., Samsung N210+;
> 3. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, and the update events arrive before
>    button driver is resumed;
> 4. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, but the update events arrive after
>    button driver is resumed, ex., Surface Pro 3;
> 5. Some platforms never send "open" events, _LID returns value sticks to
>    "close", ex., Surface Pro 1.
> Currently, all cases work fine with systemd 233, but only case 1,2 work
> fine with systemd 229.
> 
> Case 3,4 can be treated as an event missing issue:
>    After seeing a LID "close" event, systemd 229 will wait several seconds
>    (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
>    platforms, if users close lid, and re-open it during the
>    HoldoffTimeoutSec period, there is still no "open" events seen by the
>    userspace. Thus systemd still considers the last state as "close" and
>    suspends the platform after the HoldoffTimeoutSec times out.
> 
> Note that not only systemd 229, desktop managers (ex.,
> gnome-settings-daemon) also suffer from this issue.
> 
> This patch tries to fix this issue by periodically sending _LID return
> value to userspace, which ensures to trigger a SW_LID event when the
> underlying hardware state has changed. As adding a periodic timer is not a
> power friendly way, this patch prepares an option for users to enable on
> failure platforms for old userspace programs.
> 
> Users can configure update interval via button.lid_update_interval.
> This should be configured to a smaller value than HoldoffTimeoutSec in
> /etc/systemd/logind.conf.
> 
> Cc: <systemd-devel@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---

NACK: what is the point if you just want to provide an event to user
space? We already explained to you that the events do not matter, only
the state is. If user space has an issue with a state not being in sync,
it's a user space bug and it has to be fixed in user space.

This patch could be useful if the purpose was to monitor the changes
while the state is unreliable (in case 4):
- if _LID returns a different value than right after suspend, it is
  expected to be something reliable, and so we could then re-create the
  input node and present it to user space
- if _LID still returns the same value after a somewhat long delay
  (10-20 seconds), then we can consider the value to be correct and
  re-create the input node.

Polling for polling and hoping user space will have more chances of
seeing an event for an EV_SW is moot.

Cheers,
Benjamin

>  drivers/acpi/button.c | 17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 67a0d78..a8b119e 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -126,6 +126,14 @@ static unsigned long lid_notify_timeout __read_mostly = 10;
>  module_param(lid_notify_timeout, ulong, 0644);
>  MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
>  
> +static bool lid_periodic_update __read_mostly = false;
> +module_param(lid_periodic_update, bool, 0644);
> +MODULE_PARM_DESC(lid_periodic_update, "Periodically sending lid state updates");
> +
> +static unsigned long lid_update_interval __read_mostly = 1 * MSEC_PER_SEC;
> +module_param(lid_update_interval, ulong, 0644);
> +MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid periodic updates");
> +
>  /* --------------------------------------------------------------------------
>                                FS Interface (/proc)
>     -------------------------------------------------------------------------- */
> @@ -395,6 +403,8 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>  		break;
>  	case ACPI_BUTTON_LID_INIT_METHOD:
>  		(void)acpi_lid_update_state(device);
> +		if (lid_periodic_update)
> +			acpi_lid_start_timer(device, lid_update_interval);
>  		break;
>  	case ACPI_BUTTON_LID_INIT_IGNORE:
>  	default:
> @@ -560,8 +570,11 @@ static int acpi_button_add(struct acpi_device *device)
>  		 * more we only care about the last one...
>  		 */
>  		lid_device = device;
> -		acpi_lid_start_timer(device,
> -			lid_notify_timeout * MSEC_PER_SEC);
> +		if (lid_periodic_update)
> +			acpi_lid_initialize_state(device);
> +		else
> +			acpi_lid_start_timer(device,
> +				lid_notify_timeout * MSEC_PER_SEC);
>  	}
>  
>  	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
> -- 
> 2.7.4
> 
_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [RFC PATCH v6 2/5] ACPI: button: Add an optional workaround to fix an event missing issue for old userspace

[Benjamin Tissoires]

On Jun 21 2017 or thereabouts, Lv Zheng wrote:
> There are platform variations implementing ACPI lid device in different
> ways:
> 1. Some platforms send "open" events to OS and the events arrive before
>    button driver is resumed;
> 2. Some platforms send "open" events to OS, but the events arrive after
>    button driver is resumed, ex., Samsung N210+;
> 3. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, and the update events arrive before
>    button driver is resumed;
> 4. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, but the update events arrive after
>    button driver is resumed, ex., Surface Pro 3;
> 5. Some platforms never send "open" events, _LID returns value sticks to
>    "close", ex., Surface Pro 1.
> Currently, all cases work fine with systemd 233, but only case 1,2 work
> fine with systemd 229.
> 
> Case 3,4 can be treated as an event missing issue:
>    After seeing a LID "close" event, systemd 229 will wait several seconds
>    (HoldoffTimeoutSec) before suspending the platform. Thus on case 4
>    platforms, if users close lid, and re-open it during the
>    HoldoffTimeoutSec period, there is still no "open" events seen by the
>    userspace. Thus systemd still considers the last state as "close" and
>    suspends the platform after the HoldoffTimeoutSec times out.
> 
> Note that not only systemd 229, desktop managers (ex.,
> gnome-settings-daemon) also suffer from this issue.
> 
> This patch tries to fix this issue by periodically sending _LID return
> value to userspace, which ensures to trigger a SW_LID event when the
> underlying hardware state has changed. As adding a periodic timer is not a
> power friendly way, this patch prepares an option for users to enable on
> failure platforms for old userspace programs.
> 
> Users can configure update interval via button.lid_update_interval.
> This should be configured to a smaller value than HoldoffTimeoutSec in
> /etc/systemd/logind.conf.
> 
> Cc: <systemd-devel@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---

NACK: what is the point if you just want to provide an event to user
space? We already explained to you that the events do not matter, only
the state is. If user space has an issue with a state not being in sync,
it's a user space bug and it has to be fixed in user space.

This patch could be useful if the purpose was to monitor the changes
while the state is unreliable (in case 4):
- if _LID returns a different value than right after suspend, it is
  expected to be something reliable, and so we could then re-create the
  input node and present it to user space
- if _LID still returns the same value after a somewhat long delay
  (10-20 seconds), then we can consider the value to be correct and
  re-create the input node.

Polling for polling and hoping user space will have more chances of
seeing an event for an EV_SW is moot.

Cheers,
Benjamin

>  drivers/acpi/button.c | 17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 67a0d78..a8b119e 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -126,6 +126,14 @@ static unsigned long lid_notify_timeout __read_mostly = 10;
>  module_param(lid_notify_timeout, ulong, 0644);
>  MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
>  
> +static bool lid_periodic_update __read_mostly = false;
> +module_param(lid_periodic_update, bool, 0644);
> +MODULE_PARM_DESC(lid_periodic_update, "Periodically sending lid state updates");
> +
> +static unsigned long lid_update_interval __read_mostly = 1 * MSEC_PER_SEC;
> +module_param(lid_update_interval, ulong, 0644);
> +MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid periodic updates");
> +
>  /* --------------------------------------------------------------------------
>                                FS Interface (/proc)
>     -------------------------------------------------------------------------- */
> @@ -395,6 +403,8 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>  		break;
>  	case ACPI_BUTTON_LID_INIT_METHOD:
>  		(void)acpi_lid_update_state(device);
> +		if (lid_periodic_update)
> +			acpi_lid_start_timer(device, lid_update_interval);
>  		break;
>  	case ACPI_BUTTON_LID_INIT_IGNORE:
>  	default:
> @@ -560,8 +570,11 @@ static int acpi_button_add(struct acpi_device *device)
>  		 * more we only care about the last one...
>  		 */
>  		lid_device = device;
> -		acpi_lid_start_timer(device,
> -			lid_notify_timeout * MSEC_PER_SEC);
> +		if (lid_periodic_update)
> +			acpi_lid_initialize_state(device);
> +		else
> +			acpi_lid_start_timer(device,
> +				lid_notify_timeout * MSEC_PER_SEC);
>  	}
>  
>  	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
> -- 
> 2.7.4
> 

[RFC PATCH v6 3/5] ACPI: button: Rework lid_init_state=ignore mode

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, all cases work find with systemd 233, but only case 1,2,3,4 work
fine with systemd 229.

After fixing all the other issues for old userspace programs, case 5 is the
only case that the exported input node is still not fully compliant to
SW_LID ABI and thus needs quirks or ABI changes.

The original button.lid_init_state=ignore ABI change solution is now too
complicated if its purpose is to only solve this final incompliant use
case. This patch re-works it by unconditionally prepending "open"
complement events.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 85 +++------------------------------------------------
 1 file changed, 5 insertions(+), 80 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index a8b119e..1256a8c 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -109,8 +109,6 @@ struct acpi_button {
 	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
-	int last_state;
-	ktime_t last_time;
 	bool suspended;
 };
 
@@ -118,10 +116,6 @@ static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 
-static unsigned long lid_report_interval __read_mostly = 500;
-module_param(lid_report_interval, ulong, 0644);
-MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
-
 static unsigned long lid_notify_timeout __read_mostly = 10;
 module_param(lid_notify_timeout, ulong, 0644);
 MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
@@ -157,79 +151,12 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
-	ktime_t next_report;
-	bool do_update;
-
-	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
-	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
-	next_report = ktime_add(button->last_time,
-				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
-		/* Complain the buggy firmware */
-		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
-		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
-		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
-		}
-	}
-	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE)
+		input_report_switch(button->input, SW_LID, 0);
+
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
 
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
@@ -524,8 +451,6 @@ static int acpi_button_add(struct acpi_device *device)
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
 		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
-		button->last_state = !!acpi_lid_evaluate_state(device);
-		button->last_time = ktime_get();
 		init_timer(&button->lid_timer);
 		setup_timer(&button->lid_timer,
 			    acpi_lid_timeout, (ulong)device);
-- 
2.7.4

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[RFC PATCH v6 3/5] ACPI: button: Rework lid_init_state=ignore mode

[Lv Zheng]

There are platform variations implementing ACPI lid device in different
ways:
1. Some platforms send "open" events to OS and the events arrive before
   button driver is resumed;
2. Some platforms send "open" events to OS, but the events arrive after
   button driver is resumed, ex., Samsung N210+;
3. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, and the update events arrive before
   button driver is resumed;
4. Some platforms never send "open" events to OS, but send "open" events to
   update the cached _LID return value, but the update events arrive after
   button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send "open" events, _LID returns value sticks to
   "close", ex., Surface Pro 1.
Currently, all cases work find with systemd 233, but only case 1,2,3,4 work
fine with systemd 229.

After fixing all the other issues for old userspace programs, case 5 is the
only case that the exported input node is still not fully compliant to
SW_LID ABI and thus needs quirks or ABI changes.

The original button.lid_init_state=ignore ABI change solution is now too
complicated if its purpose is to only solve this final incompliant use
case. This patch re-works it by unconditionally prepending "open"
complement events.

Cc: <systemd-devel@lists.freedesktop.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 85 +++------------------------------------------------
 1 file changed, 5 insertions(+), 80 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index a8b119e..1256a8c 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -109,8 +109,6 @@ struct acpi_button {
 	struct timer_list lid_timer;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
-	int last_state;
-	ktime_t last_time;
 	bool suspended;
 };
 
@@ -118,10 +116,6 @@ static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 
-static unsigned long lid_report_interval __read_mostly = 500;
-module_param(lid_report_interval, ulong, 0644);
-MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
-
 static unsigned long lid_notify_timeout __read_mostly = 10;
 module_param(lid_notify_timeout, ulong, 0644);
 MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
@@ -157,79 +151,12 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
-	ktime_t next_report;
-	bool do_update;
-
-	/*
-	 * In lid_init_state=ignore mode, if user opens/closes lid
-	 * frequently with "open" missing, and "last_time" is also updated
-	 * frequently, "close" cannot be delivered to the userspace.
-	 * So "last_time" is only updated after a timeout or an actual
-	 * switch.
-	 */
-	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
-	    button->last_state != !!state)
-		do_update = true;
-	else
-		do_update = false;
-
-	next_report = ktime_add(button->last_time,
-				ms_to_ktime(lid_report_interval));
-	if (button->last_state == !!state &&
-	    ktime_after(ktime_get(), next_report)) {
-		/* Complain the buggy firmware */
-		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
-		/*
-		 * Send the unreliable complement switch event:
-		 *
-		 * On most platforms, the lid device is reliable. However
-		 * there are exceptions:
-		 * 1. Platforms returning initial lid state as "close" by
-		 *    default after booting/resuming:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
-		 * 2. Platforms never reporting "open" events:
-		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
-		 * On these buggy platforms, the usage model of the ACPI
-		 * lid device actually is:
-		 * 1. The initial returning value of _LID may not be
-		 *    reliable.
-		 * 2. The open event may not be reliable.
-		 * 3. The close event is reliable.
-		 *
-		 * But SW_LID is typed as input switch event, the input
-		 * layer checks if the event is redundant. Hence if the
-		 * state is not switched, the userspace cannot see this
-		 * platform triggered reliable event. By inserting a
-		 * complement switch event, it then is guaranteed that the
-		 * platform triggered reliable one can always be seen by
-		 * the userspace.
-		 */
-		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
-			do_update = true;
-			/*
-			 * Do generate complement switch event for "close"
-			 * as "close" is reliable and wrong "open" won't
-			 * trigger unexpected behaviors.
-			 * Do not generate complement switch event for
-			 * "open" as "open" is not reliable and wrong
-			 * "close" will trigger unexpected behaviors.
-			 */
-			if (!state) {
-				input_report_switch(button->input,
-						    SW_LID, state);
-				input_sync(button->input);
-			}
-		}
-	}
-	/* Send the platform triggered reliable event */
-	if (do_update) {
-		input_report_switch(button->input, SW_LID, !state);
-		input_sync(button->input);
-		button->last_state = !!state;
-		button->last_time = ktime_get();
-	}
+	if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE)
+		input_report_switch(button->input, SW_LID, 0);
+
+	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
 
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
@@ -524,8 +451,6 @@ static int acpi_button_add(struct acpi_device *device)
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
 		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
-		button->last_state = !!acpi_lid_evaluate_state(device);
-		button->last_time = ktime_get();
 		init_timer(&button->lid_timer);
 		setup_timer(&button->lid_timer,
 			    acpi_lid_timeout, (ulong)device);
-- 
2.7.4

Re: [RFC PATCH v6 3/5] ACPI: button: Rework lid_init_state=ignore mode

[Benjamin Tissoires]

On Jun 21 2017 or thereabouts, Lv Zheng wrote:
> There are platform variations implementing ACPI lid device in different
> ways:
> 1. Some platforms send "open" events to OS and the events arrive before
>    button driver is resumed;
> 2. Some platforms send "open" events to OS, but the events arrive after
>    button driver is resumed, ex., Samsung N210+;
> 3. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, and the update events arrive before
>    button driver is resumed;
> 4. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, but the update events arrive after
>    button driver is resumed, ex., Surface Pro 3;
> 5. Some platforms never send "open" events, _LID returns value sticks to
>    "close", ex., Surface Pro 1.
> Currently, all cases work find with systemd 233, but only case 1,2,3,4 work
> fine with systemd 229.
> 
> After fixing all the other issues for old userspace programs, case 5 is the
> only case that the exported input node is still not fully compliant to
> SW_LID ABI and thus needs quirks or ABI changes.
> 
> The original button.lid_init_state=ignore ABI change solution is now too
> complicated if its purpose is to only solve this final incompliant use
> case. This patch re-works it by unconditionally prepending "open"
> complement events.

Ouch. I thought the purpose of "ignore" was to not query the state on
boot/resume and only rely on acpi notification to switch the states.

I like the patch, the commit message is IMO too far from what it
actually does:
- it removes the caching update of _LID switch
- it removes the filtering of too close notifications.

One more note inlined:

> 
> Cc: <systemd-devel@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c | 85 +++------------------------------------------------
>  1 file changed, 5 insertions(+), 80 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index a8b119e..1256a8c 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -109,8 +109,6 @@ struct acpi_button {
>  	struct timer_list lid_timer;
>  	char phys[32];			/* for input device */
>  	unsigned long pushed;
> -	int last_state;
> -	ktime_t last_time;
>  	bool suspended;
>  };
>  
> @@ -118,10 +116,6 @@ static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
>  static struct acpi_device *lid_device;
>  static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
>  
> -static unsigned long lid_report_interval __read_mostly = 500;
> -module_param(lid_report_interval, ulong, 0644);
> -MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> -

You shouldn't do that. It is kernel ABI, and if you remove the module,
people that tuned their kernel with this parameter will have the module
failing to load. You should keep this around for a few kernel releases,
and mark its usage deprecated by issuing a warning in the dmesg.

Cheers,
Benjamin

>  static unsigned long lid_notify_timeout __read_mostly = 10;
>  module_param(lid_notify_timeout, ulong, 0644);
>  MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
> @@ -157,79 +151,12 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
>  {
>  	struct acpi_button *button = acpi_driver_data(device);
>  	int ret;
> -	ktime_t next_report;
> -	bool do_update;
> -
> -	/*
> -	 * In lid_init_state=ignore mode, if user opens/closes lid
> -	 * frequently with "open" missing, and "last_time" is also updated
> -	 * frequently, "close" cannot be delivered to the userspace.
> -	 * So "last_time" is only updated after a timeout or an actual
> -	 * switch.
> -	 */
> -	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
> -	    button->last_state != !!state)
> -		do_update = true;
> -	else
> -		do_update = false;
> -
> -	next_report = ktime_add(button->last_time,
> -				ms_to_ktime(lid_report_interval));
> -	if (button->last_state == !!state &&
> -	    ktime_after(ktime_get(), next_report)) {
> -		/* Complain the buggy firmware */
> -		pr_warn_once("The lid device is not compliant to SW_LID.\n");
>  
> -		/*
> -		 * Send the unreliable complement switch event:
> -		 *
> -		 * On most platforms, the lid device is reliable. However
> -		 * there are exceptions:
> -		 * 1. Platforms returning initial lid state as "close" by
> -		 *    default after booting/resuming:
> -		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
> -		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
> -		 * 2. Platforms never reporting "open" events:
> -		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
> -		 * On these buggy platforms, the usage model of the ACPI
> -		 * lid device actually is:
> -		 * 1. The initial returning value of _LID may not be
> -		 *    reliable.
> -		 * 2. The open event may not be reliable.
> -		 * 3. The close event is reliable.
> -		 *
> -		 * But SW_LID is typed as input switch event, the input
> -		 * layer checks if the event is redundant. Hence if the
> -		 * state is not switched, the userspace cannot see this
> -		 * platform triggered reliable event. By inserting a
> -		 * complement switch event, it then is guaranteed that the
> -		 * platform triggered reliable one can always be seen by
> -		 * the userspace.
> -		 */
> -		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
> -			do_update = true;
> -			/*
> -			 * Do generate complement switch event for "close"
> -			 * as "close" is reliable and wrong "open" won't
> -			 * trigger unexpected behaviors.
> -			 * Do not generate complement switch event for
> -			 * "open" as "open" is not reliable and wrong
> -			 * "close" will trigger unexpected behaviors.
> -			 */
> -			if (!state) {
> -				input_report_switch(button->input,
> -						    SW_LID, state);
> -				input_sync(button->input);
> -			}
> -		}
> -	}
> -	/* Send the platform triggered reliable event */
> -	if (do_update) {
> -		input_report_switch(button->input, SW_LID, !state);
> -		input_sync(button->input);
> -		button->last_state = !!state;
> -		button->last_time = ktime_get();
> -	}
> +	if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE)
> +		input_report_switch(button->input, SW_LID, 0);
> +
> +	input_report_switch(button->input, SW_LID, !state);
> +	input_sync(button->input);
>  
>  	if (state)
>  		pm_wakeup_event(&device->dev, 0);
> @@ -524,8 +451,6 @@ static int acpi_button_add(struct acpi_device *device)
>  		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
>  		sprintf(class, "%s/%s",
>  			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
> -		button->last_state = !!acpi_lid_evaluate_state(device);
> -		button->last_time = ktime_get();
>  		init_timer(&button->lid_timer);
>  		setup_timer(&button->lid_timer,
>  			    acpi_lid_timeout, (ulong)device);
> -- 
> 2.7.4
> 
_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [RFC PATCH v6 3/5] ACPI: button: Rework lid_init_state=ignore mode

[Benjamin Tissoires]

On Jun 21 2017 or thereabouts, Lv Zheng wrote:
> There are platform variations implementing ACPI lid device in different
> ways:
> 1. Some platforms send "open" events to OS and the events arrive before
>    button driver is resumed;
> 2. Some platforms send "open" events to OS, but the events arrive after
>    button driver is resumed, ex., Samsung N210+;
> 3. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, and the update events arrive before
>    button driver is resumed;
> 4. Some platforms never send "open" events to OS, but send "open" events to
>    update the cached _LID return value, but the update events arrive after
>    button driver is resumed, ex., Surface Pro 3;
> 5. Some platforms never send "open" events, _LID returns value sticks to
>    "close", ex., Surface Pro 1.
> Currently, all cases work find with systemd 233, but only case 1,2,3,4 work
> fine with systemd 229.
> 
> After fixing all the other issues for old userspace programs, case 5 is the
> only case that the exported input node is still not fully compliant to
> SW_LID ABI and thus needs quirks or ABI changes.
> 
> The original button.lid_init_state=ignore ABI change solution is now too
> complicated if its purpose is to only solve this final incompliant use
> case. This patch re-works it by unconditionally prepending "open"
> complement events.

Ouch. I thought the purpose of "ignore" was to not query the state on
boot/resume and only rely on acpi notification to switch the states.

I like the patch, the commit message is IMO too far from what it
actually does:
- it removes the caching update of _LID switch
- it removes the filtering of too close notifications.

One more note inlined:

> 
> Cc: <systemd-devel@lists.freedesktop.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c | 85 +++------------------------------------------------
>  1 file changed, 5 insertions(+), 80 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index a8b119e..1256a8c 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -109,8 +109,6 @@ struct acpi_button {
>  	struct timer_list lid_timer;
>  	char phys[32];			/* for input device */
>  	unsigned long pushed;
> -	int last_state;
> -	ktime_t last_time;
>  	bool suspended;
>  };
>  
> @@ -118,10 +116,6 @@ static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
>  static struct acpi_device *lid_device;
>  static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
>  
> -static unsigned long lid_report_interval __read_mostly = 500;
> -module_param(lid_report_interval, ulong, 0644);
> -MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> -

You shouldn't do that. It is kernel ABI, and if you remove the module,
people that tuned their kernel with this parameter will have the module
failing to load. You should keep this around for a few kernel releases,
and mark its usage deprecated by issuing a warning in the dmesg.

Cheers,
Benjamin

>  static unsigned long lid_notify_timeout __read_mostly = 10;
>  module_param(lid_notify_timeout, ulong, 0644);
>  MODULE_PARM_DESC(lid_notify_timeout, "Timeout (s) before receiving lid notification");
> @@ -157,79 +151,12 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
>  {
>  	struct acpi_button *button = acpi_driver_data(device);
>  	int ret;
> -	ktime_t next_report;
> -	bool do_update;
> -
> -	/*
> -	 * In lid_init_state=ignore mode, if user opens/closes lid
> -	 * frequently with "open" missing, and "last_time" is also updated
> -	 * frequently, "close" cannot be delivered to the userspace.
> -	 * So "last_time" is only updated after a timeout or an actual
> -	 * switch.
> -	 */
> -	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
> -	    button->last_state != !!state)
> -		do_update = true;
> -	else
> -		do_update = false;
> -
> -	next_report = ktime_add(button->last_time,
> -				ms_to_ktime(lid_report_interval));
> -	if (button->last_state == !!state &&
> -	    ktime_after(ktime_get(), next_report)) {
> -		/* Complain the buggy firmware */
> -		pr_warn_once("The lid device is not compliant to SW_LID.\n");
>  
> -		/*
> -		 * Send the unreliable complement switch event:
> -		 *
> -		 * On most platforms, the lid device is reliable. However
> -		 * there are exceptions:
> -		 * 1. Platforms returning initial lid state as "close" by
> -		 *    default after booting/resuming:
> -		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
> -		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
> -		 * 2. Platforms never reporting "open" events:
> -		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
> -		 * On these buggy platforms, the usage model of the ACPI
> -		 * lid device actually is:
> -		 * 1. The initial returning value of _LID may not be
> -		 *    reliable.
> -		 * 2. The open event may not be reliable.
> -		 * 3. The close event is reliable.
> -		 *
> -		 * But SW_LID is typed as input switch event, the input
> -		 * layer checks if the event is redundant. Hence if the
> -		 * state is not switched, the userspace cannot see this
> -		 * platform triggered reliable event. By inserting a
> -		 * complement switch event, it then is guaranteed that the
> -		 * platform triggered reliable one can always be seen by
> -		 * the userspace.
> -		 */
> -		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
> -			do_update = true;
> -			/*
> -			 * Do generate complement switch event for "close"
> -			 * as "close" is reliable and wrong "open" won't
> -			 * trigger unexpected behaviors.
> -			 * Do not generate complement switch event for
> -			 * "open" as "open" is not reliable and wrong
> -			 * "close" will trigger unexpected behaviors.
> -			 */
> -			if (!state) {
> -				input_report_switch(button->input,
> -						    SW_LID, state);
> -				input_sync(button->input);
> -			}
> -		}
> -	}
> -	/* Send the platform triggered reliable event */
> -	if (do_update) {
> -		input_report_switch(button->input, SW_LID, !state);
> -		input_sync(button->input);
> -		button->last_state = !!state;
> -		button->last_time = ktime_get();
> -	}
> +	if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE)
> +		input_report_switch(button->input, SW_LID, 0);
> +
> +	input_report_switch(button->input, SW_LID, !state);
> +	input_sync(button->input);
>  
>  	if (state)
>  		pm_wakeup_event(&device->dev, 0);
> @@ -524,8 +451,6 @@ static int acpi_button_add(struct acpi_device *device)
>  		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
>  		sprintf(class, "%s/%s",
>  			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
> -		button->last_state = !!acpi_lid_evaluate_state(device);
> -		button->last_time = ktime_get();
>  		init_timer(&button->lid_timer);
>  		setup_timer(&button->lid_timer,
>  			    acpi_lid_timeout, (ulong)device);
> -- 
> 2.7.4
> 

[RFC PATCH v6 4/5] ACPI: button: extract input creation/destruction helpers

[Lv Zheng]

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

When the LID switch ACPI implementation is unreliable, we might want
to remove the device when we are not sure about the state. This should
prevent any suspend/resume loops given that in that case, there will be
no more LID switch input node.

This patch prepares the dynamic creation/destruction of the input node.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 86 +++++++++++++++++++++++++++++++--------------------
 1 file changed, 53 insertions(+), 33 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 1256a8c..91c9989 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -302,6 +302,54 @@ int acpi_lid_open(void)
 }
 EXPORT_SYMBOL(acpi_lid_open);
 
+static void acpi_button_remove_input(struct acpi_device *device)
+{
+	struct acpi_button *button = acpi_driver_data(device);
+
+	input_unregister_device(button->input);
+	button->input = NULL;
+}
+
+static int acpi_button_add_input(struct acpi_device *device)
+{
+	struct acpi_button *button = acpi_driver_data(device);
+	struct input_dev *input;
+	int error;
+
+	input = input_allocate_device();
+	if (!input) {
+		error = -ENOMEM;
+		goto err;
+	}
+
+	input->name = acpi_device_name(device);
+	input->phys = button->phys;
+	input->id.bustype = BUS_HOST;
+	input->id.product = button->type;
+	input->dev.parent = &device->dev;
+	switch (button->type) {
+	case ACPI_BUTTON_TYPE_POWER:
+		input_set_capability(input, EV_KEY, KEY_POWER);
+		break;
+	case ACPI_BUTTON_TYPE_SLEEP:
+		input_set_capability(input, EV_KEY, KEY_SLEEP);
+		break;
+	case ACPI_BUTTON_TYPE_LID:
+		input_set_capability(input, EV_SW, SW_LID);
+		break;
+	}
+
+	error = input_register_device(input);
+	if (error)
+		goto err;
+
+	button->input = input;
+	return 0;
+ err:
+	input_free_device(input);
+	return error;
+}
+
 static int acpi_lid_update_state(struct acpi_device *device)
 {
 	int state;
@@ -414,7 +462,6 @@ static int acpi_button_resume(struct device *dev)
 static int acpi_button_add(struct acpi_device *device)
 {
 	struct acpi_button *button;
-	struct input_dev *input;
 	const char *hid = acpi_device_hid(device);
 	char *name, *class;
 	int error;
@@ -425,12 +472,6 @@ static int acpi_button_add(struct acpi_device *device)
 
 	device->driver_data = button;
 
-	button->input = input = input_allocate_device();
-	if (!input) {
-		error = -ENOMEM;
-		goto err_free_button;
-	}
-
 	name = acpi_device_name(device);
 	class = acpi_device_class(device);
 
@@ -457,38 +498,19 @@ static int acpi_button_add(struct acpi_device *device)
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
-		goto err_free_input;
+		goto err_free_button;
 	}
 
 	error = acpi_button_add_fs(device);
 	if (error)
-		goto err_free_input;
+		goto err_free_button;
 
 	snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
 
-	input->name = name;
-	input->phys = button->phys;
-	input->id.bustype = BUS_HOST;
-	input->id.product = button->type;
-	input->dev.parent = &device->dev;
-
-	switch (button->type) {
-	case ACPI_BUTTON_TYPE_POWER:
-		input_set_capability(input, EV_KEY, KEY_POWER);
-		break;
-
-	case ACPI_BUTTON_TYPE_SLEEP:
-		input_set_capability(input, EV_KEY, KEY_SLEEP);
-		break;
-
-	case ACPI_BUTTON_TYPE_LID:
-		input_set_capability(input, EV_SW, SW_LID);
-		break;
-	}
-
-	error = input_register_device(input);
+	error = acpi_button_add_input(device);
 	if (error)
 		goto err_remove_fs;
+
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
 		/*
 		 * This assumes there's only one lid device, or if there are
@@ -507,8 +529,6 @@ static int acpi_button_add(struct acpi_device *device)
 
  err_remove_fs:
 	acpi_button_remove_fs(device);
- err_free_input:
-	input_free_device(input);
  err_free_button:
 	kfree(button);
 	return error;
@@ -521,7 +541,7 @@ static int acpi_button_remove(struct acpi_device *device)
 	acpi_button_remove_fs(device);
 	if (button->type == ACPI_BUTTON_TYPE_LID)
 		del_timer_sync(&button->lid_timer);
-	input_unregister_device(button->input);
+	acpi_button_remove_input(device);
 	kfree(button);
 	return 0;
 }
-- 
2.7.4

[RFC PATCH v6 5/5] ACPI: button: Add an optional workaround to fix a persistent close issue for old userspace

[Lv Zheng]

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Because of the variation of firmware implementation, there is a chance
the LID state is unknown:
1. Some platforms send "open" ACPI notification to the OS and the event
   arrive before the button driver is resumed;
2. Some platforms send "open" ACPI notification to the OS, but the
event
   arrives after the button driver is resumed, ex., Samsung N210+;
3. Some platforms never send an "open" ACPI notification to the OS, but
   update the cached _LID return value to "open", and this update
arrives
   before the button driver is resumed;
4. Some platforms never send an "open" ACPI notification to the OS, but
   update the cached _LID return value to "open", but this update
arrives
   after the button driver is resumed, ex., Surface Pro 3;
5. Some platforms never send an "open" ACPI notification to the OS, and
   _LID ACPI method returns a value which stays to "close", ex.,
   Surface Pro 1.
Currently, all cases work find with systemd 233, but only case 1,2,3,4 work
fine with old userspace.

After fixing all the other issues for old userspace programs, case 5 is the
only case that the exported input node is still not fully compliant to
SW_LID ABI and thus needs quirks or ABI changes.

This patch provides a dynamic SW_LID input node solution to make sure we do
not export an input node with an unknown state to prevent suspend loops.

The database of unreliable devices is left to userspace to handle with a
hwdb file and a udev rule.

Reworked by Lv to make this solution optional, code based on top of old
"ignore" mode and make lid_reliable configurable to all lid devices to
eliminate the difficulties of synchronously handling global lid_device.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
---
 drivers/acpi/button.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 88 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 91c9989..f11045d 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -107,11 +107,13 @@ struct acpi_button {
 	unsigned int type;
 	struct input_dev *input;
 	struct timer_list lid_timer;
+	bool lid_reliable;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
 	bool suspended;
 };
 
+static DEFINE_MUTEX(lid_input_lock);
 static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
@@ -128,6 +130,10 @@ static unsigned long lid_update_interval __read_mostly = 1 * MSEC_PER_SEC;
 module_param(lid_update_interval, ulong, 0644);
 MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid periodic updates");
 
+static bool lid_unreliable __read_mostly = false;
+module_param(lid_unreliable, bool, 0644);
+MODULE_PARM_DESC(lid_unreliable, "Dynamically adding/removing input node for unreliable lids");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -152,6 +158,9 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
 
+	if (!button->input)
+		return -EINVAL;
+
 	if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE)
 		input_report_switch(button->input, SW_LID, 0);
 
@@ -306,6 +315,8 @@ static void acpi_button_remove_input(struct acpi_device *device)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (!button->input)
+		return;
 	input_unregister_device(button->input);
 	button->input = NULL;
 }
@@ -316,6 +327,9 @@ static int acpi_button_add_input(struct acpi_device *device)
 	struct input_dev *input;
 	int error;
 
+	if (button->input)
+		return 0;
+
 	input = input_allocate_device();
 	if (!input) {
 		error = -ENOMEM;
@@ -378,8 +392,10 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 		break;
 	case ACPI_BUTTON_LID_INIT_METHOD:
 		(void)acpi_lid_update_state(device);
+		mutex_unlock(&lid_input_lock);
 		if (lid_periodic_update)
 			acpi_lid_start_timer(device, lid_update_interval);
+		mutex_lock(&lid_input_lock);
 		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
@@ -391,7 +407,9 @@ static void acpi_lid_timeout(ulong arg)
 {
 	struct acpi_device *device = (struct acpi_device *)arg;
 
+	mutex_lock(&lid_input_lock);
 	acpi_lid_initialize_state(device);
+	mutex_unlock(&lid_input_lock);
 }
 
 static void acpi_button_notify(struct acpi_device *device, u32 event)
@@ -406,7 +424,11 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
+			mutex_lock(&lid_input_lock);
+			if (!button->input)
+				acpi_button_add_input(device);
 			acpi_lid_update_state(device);
+			mutex_unlock(&lid_input_lock);
 		} else {
 			int keycode;
 
@@ -440,8 +462,13 @@ static int acpi_button_suspend(struct device *dev)
 	struct acpi_device *device = to_acpi_device(dev);
 	struct acpi_button *button = acpi_driver_data(device);
 
-	if (button->type == ACPI_BUTTON_TYPE_LID)
+	if (button->type == ACPI_BUTTON_TYPE_LID) {
+		mutex_lock(&lid_input_lock);
+		if (!button->lid_reliable)
+			acpi_button_remove_input(device);
+		mutex_unlock(&lid_input_lock);
 		del_timer(&button->lid_timer);
+	}
 	button->suspended = true;
 	return 0;
 }
@@ -459,6 +486,38 @@ static int acpi_button_resume(struct device *dev)
 }
 #endif
 
+static ssize_t lid_reliable_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct acpi_device *device = to_acpi_device(dev);
+	struct acpi_button *button = acpi_driver_data(device);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", button->lid_reliable);
+}
+static ssize_t lid_reliable_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct acpi_device *device = to_acpi_device(dev);
+	struct acpi_button *button = acpi_driver_data(device);
+
+	mutex_lock(&lid_input_lock);
+	if (strtobool(buf, &button->lid_reliable) < 0) {
+		mutex_unlock(&lid_input_lock);
+		return -EINVAL;
+	}
+	if (button->lid_reliable)
+		acpi_button_add_input(device);
+	else {
+		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
+		acpi_button_remove_input(device);
+	}
+	acpi_lid_initialize_state(device);
+	mutex_unlock(&lid_input_lock);
+	return count;
+}
+static DEVICE_ATTR_RW(lid_reliable);
+
 static int acpi_button_add(struct acpi_device *device)
 {
 	struct acpi_button *button;
@@ -507,21 +566,37 @@ static int acpi_button_add(struct acpi_device *device)
 
 	snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
 
-	error = acpi_button_add_input(device);
-	if (error)
-		goto err_remove_fs;
-
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
 		/*
 		 * This assumes there's only one lid device, or if there are
 		 * more we only care about the last one...
 		 */
 		lid_device = device;
+		device_create_file(&device->dev, &dev_attr_lid_reliable);
+		mutex_lock(&lid_input_lock);
+		error = acpi_button_add_input(device);
+		if (error) {
+			mutex_unlock(&lid_input_lock);
+			goto err_remove_fs;
+		}
+		if (lid_unreliable) {
+			lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
+			button->lid_reliable = false;
+		} else
+			button->lid_reliable = true;
 		if (lid_periodic_update)
 			acpi_lid_initialize_state(device);
-		else
+		else {
+			mutex_unlock(&lid_input_lock);
 			acpi_lid_start_timer(device,
 				lid_notify_timeout * MSEC_PER_SEC);
+			mutex_lock(&lid_input_lock);
+		}
+		mutex_unlock(&lid_input_lock);
+	} else {
+		error = acpi_button_add_input(device);
+		if (error)
+			goto err_remove_fs;
 	}
 
 	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
@@ -539,9 +614,14 @@ static int acpi_button_remove(struct acpi_device *device)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	acpi_button_remove_fs(device);
-	if (button->type == ACPI_BUTTON_TYPE_LID)
+	if (button->type == ACPI_BUTTON_TYPE_LID) {
+		mutex_lock(&lid_input_lock);
+		acpi_button_remove_input(device);
+		mutex_unlock(&lid_input_lock);
 		del_timer_sync(&button->lid_timer);
-	acpi_button_remove_input(device);
+		device_remove_file(&device->dev, &dev_attr_lid_reliable);
+	} else
+		acpi_button_remove_input(device);
 	kfree(button);
 	return 0;
 }
-- 
2.7.4

Re: [RFC PATCH v6 5/5] ACPI: button: Add an optional workaround to fix a persistent close issue for old userspace

[Benjamin Tissoires]

On Jun 21 2017 or thereabouts, Lv Zheng wrote:
> From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> 
> Because of the variation of firmware implementation, there is a chance
> the LID state is unknown:
> 1. Some platforms send "open" ACPI notification to the OS and the event
>    arrive before the button driver is resumed;
> 2. Some platforms send "open" ACPI notification to the OS, but the
> event
>    arrives after the button driver is resumed, ex., Samsung N210+;
> 3. Some platforms never send an "open" ACPI notification to the OS, but
>    update the cached _LID return value to "open", and this update
> arrives
>    before the button driver is resumed;
> 4. Some platforms never send an "open" ACPI notification to the OS, but
>    update the cached _LID return value to "open", but this update
> arrives
>    after the button driver is resumed, ex., Surface Pro 3;
> 5. Some platforms never send an "open" ACPI notification to the OS, and
>    _LID ACPI method returns a value which stays to "close", ex.,
>    Surface Pro 1.
> Currently, all cases work find with systemd 233, but only case 1,2,3,4 work
> fine with old userspace.
> 
> After fixing all the other issues for old userspace programs, case 5 is the
> only case that the exported input node is still not fully compliant to
> SW_LID ABI and thus needs quirks or ABI changes.
> 
> This patch provides a dynamic SW_LID input node solution to make sure we do
> not export an input node with an unknown state to prevent suspend loops.
> 
> The database of unreliable devices is left to userspace to handle with a
> hwdb file and a udev rule.
> 
> Reworked by Lv to make this solution optional, code based on top of old
> "ignore" mode and make lid_reliable configurable to all lid devices to
> eliminate the difficulties of synchronously handling global lid_device.
> 

Well, you changed it enough to make it wrong now. See inlined:

> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Signed-off-by: Lv Zheng <lv.zheng@intel.com>
> ---
>  drivers/acpi/button.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 88 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 91c9989..f11045d 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -107,11 +107,13 @@ struct acpi_button {
>  	unsigned int type;
>  	struct input_dev *input;
>  	struct timer_list lid_timer;
> +	bool lid_reliable;
>  	char phys[32];			/* for input device */
>  	unsigned long pushed;
>  	bool suspended;
>  };
>  
> +static DEFINE_MUTEX(lid_input_lock);
>  static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
>  static struct acpi_device *lid_device;
>  static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> @@ -128,6 +130,10 @@ static unsigned long lid_update_interval __read_mostly = 1 * MSEC_PER_SEC;
>  module_param(lid_update_interval, ulong, 0644);
>  MODULE_PARM_DESC(lid_update_interval, "Interval (ms) between lid periodic updates");
>  
> +static bool lid_unreliable __read_mostly = false;
> +module_param(lid_unreliable, bool, 0644);
> +MODULE_PARM_DESC(lid_unreliable, "Dynamically adding/removing input node for unreliable lids");
> +
>  /* --------------------------------------------------------------------------
>                                FS Interface (/proc)
>     -------------------------------------------------------------------------- */
> @@ -152,6 +158,9 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
>  	struct acpi_button *button = acpi_driver_data(device);
>  	int ret;
>  
> +	if (!button->input)
> +		return -EINVAL;
> +
>  	if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE)
>  		input_report_switch(button->input, SW_LID, 0);
>  
> @@ -306,6 +315,8 @@ static void acpi_button_remove_input(struct acpi_device *device)
>  {
>  	struct acpi_button *button = acpi_driver_data(device);
>  
> +	if (!button->input)
> +		return;
>  	input_unregister_device(button->input);
>  	button->input = NULL;
>  }
> @@ -316,6 +327,9 @@ static int acpi_button_add_input(struct acpi_device *device)
>  	struct input_dev *input;
>  	int error;
>  
> +	if (button->input)
> +		return 0;
> +
>  	input = input_allocate_device();
>  	if (!input) {
>  		error = -ENOMEM;
> @@ -378,8 +392,10 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
>  		break;
>  	case ACPI_BUTTON_LID_INIT_METHOD:
>  		(void)acpi_lid_update_state(device);
> +		mutex_unlock(&lid_input_lock);
>  		if (lid_periodic_update)
>  			acpi_lid_start_timer(device, lid_update_interval);
> +		mutex_lock(&lid_input_lock);
>  		break;
>  	case ACPI_BUTTON_LID_INIT_IGNORE:
>  	default:
> @@ -391,7 +407,9 @@ static void acpi_lid_timeout(ulong arg)
>  {
>  	struct acpi_device *device = (struct acpi_device *)arg;
>  
> +	mutex_lock(&lid_input_lock);
>  	acpi_lid_initialize_state(device);
> +	mutex_unlock(&lid_input_lock);
>  }
>  
>  static void acpi_button_notify(struct acpi_device *device, u32 event)
> @@ -406,7 +424,11 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
>  	case ACPI_BUTTON_NOTIFY_STATUS:
>  		input = button->input;
>  		if (button->type == ACPI_BUTTON_TYPE_LID) {
> +			mutex_lock(&lid_input_lock);
> +			if (!button->input)
> +				acpi_button_add_input(device);
>  			acpi_lid_update_state(device);
> +			mutex_unlock(&lid_input_lock);
>  		} else {
>  			int keycode;
>  
> @@ -440,8 +462,13 @@ static int acpi_button_suspend(struct device *dev)
>  	struct acpi_device *device = to_acpi_device(dev);
>  	struct acpi_button *button = acpi_driver_data(device);
>  
> -	if (button->type == ACPI_BUTTON_TYPE_LID)
> +	if (button->type == ACPI_BUTTON_TYPE_LID) {
> +		mutex_lock(&lid_input_lock);
> +		if (!button->lid_reliable)
> +			acpi_button_remove_input(device);
> +		mutex_unlock(&lid_input_lock);
>  		del_timer(&button->lid_timer);
> +	}
>  	button->suspended = true;
>  	return 0;
>  }
> @@ -459,6 +486,38 @@ static int acpi_button_resume(struct device *dev)
>  }
>  #endif
>  
> +static ssize_t lid_reliable_show(struct device *dev,
> +				 struct device_attribute *attr, char *buf)
> +{
> +	struct acpi_device *device = to_acpi_device(dev);
> +	struct acpi_button *button = acpi_driver_data(device);
> +
> +	return snprintf(buf, PAGE_SIZE, "%d\n", button->lid_reliable);
> +}
> +static ssize_t lid_reliable_store(struct device *dev,
> +				  struct device_attribute *attr,
> +				  const char *buf, size_t count)
> +{
> +	struct acpi_device *device = to_acpi_device(dev);
> +	struct acpi_button *button = acpi_driver_data(device);
> +
> +	mutex_lock(&lid_input_lock);
> +	if (strtobool(buf, &button->lid_reliable) < 0) {
> +		mutex_unlock(&lid_input_lock);
> +		return -EINVAL;
> +	}
> +	if (button->lid_reliable)
> +		acpi_button_add_input(device);
> +	else {
> +		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;

Why would you link the "ignore" option to those unreliable switches?
When the input node is registered, we know that the _LID method gets
reliable, so why would you not query its state?

> +		acpi_button_remove_input(device);
> +	}
> +	acpi_lid_initialize_state(device);
> +	mutex_unlock(&lid_input_lock);
> +	return count;
> +}
> +static DEVICE_ATTR_RW(lid_reliable);
> +
>  static int acpi_button_add(struct acpi_device *device)
>  {
>  	struct acpi_button *button;
> @@ -507,21 +566,37 @@ static int acpi_button_add(struct acpi_device *device)
>  
>  	snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
>  
> -	error = acpi_button_add_input(device);
> -	if (error)
> -		goto err_remove_fs;
> -
>  	if (button->type == ACPI_BUTTON_TYPE_LID) {
>  		/*
>  		 * This assumes there's only one lid device, or if there are
>  		 * more we only care about the last one...
>  		 */
>  		lid_device = device;
> +		device_create_file(&device->dev, &dev_attr_lid_reliable);
> +		mutex_lock(&lid_input_lock);
> +		error = acpi_button_add_input(device);
> +		if (error) {
> +			mutex_unlock(&lid_input_lock);
> +			goto err_remove_fs;
> +		}
> +		if (lid_unreliable) {
> +			lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> +			button->lid_reliable = false;
> +		} else
> +			button->lid_reliable = true;

You can not add the input node if you mark it later on as unreliable.
You are presenting an unknown state to user space, which is bad.

Cheers,
Benjamin

>  		if (lid_periodic_update)
>  			acpi_lid_initialize_state(device);
> -		else
> +		else {
> +			mutex_unlock(&lid_input_lock);
>  			acpi_lid_start_timer(device,
>  				lid_notify_timeout * MSEC_PER_SEC);
> +			mutex_lock(&lid_input_lock);
> +		}
> +		mutex_unlock(&lid_input_lock);
> +	} else {
> +		error = acpi_button_add_input(device);
> +		if (error)
> +			goto err_remove_fs;
>  	}
>  
>  	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
> @@ -539,9 +614,14 @@ static int acpi_button_remove(struct acpi_device *device)
>  	struct acpi_button *button = acpi_driver_data(device);
>  
>  	acpi_button_remove_fs(device);
> -	if (button->type == ACPI_BUTTON_TYPE_LID)
> +	if (button->type == ACPI_BUTTON_TYPE_LID) {
> +		mutex_lock(&lid_input_lock);
> +		acpi_button_remove_input(device);
> +		mutex_unlock(&lid_input_lock);
>  		del_timer_sync(&button->lid_timer);
> -	acpi_button_remove_input(device);
> +		device_remove_file(&device->dev, &dev_attr_lid_reliable);
> +	} else
> +		acpi_button_remove_input(device);
>  	kfree(button);
>  	return 0;
>  }
> -- 
> 2.7.4
>