* [PATCH v4 00/10] RISC-V Add the OpenTitan Machine
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
OpenTitan is an open source silicon Root of Trust (RoT) project. This
series adds initial support for the OpenTitan machine to QEMU.
This series add the Ibex CPU to the QEMU RISC-V target. It then adds the
OpenTitan machine, the Ibex UART and the Ibex PLIC.
The UART has been tested sending and receiving data.
With this series QEMU can boot the OpenTitan ROM, Tock OS and a Tock
userspace app.
The Ibex PLIC is similar to the RISC-V PLIC (and is based on the QEMU
implementation) with some differences. The hope is that the Ibex PLIC
will converge to follow the RISC-V spec. As that happens I want to
update the QEMU Ibex PLIC and hopefully eventually replace the current
PLIC as the implementation is a little overlay complex.
For more details on OpenTitan, see here: https://docs.opentitan.org/
v4:
- Don't set the reset vector in realise
- Fix a bug where the MMU is always enabled
- Fixup the PMP/MMU size logic
v3:
- Small fixes pointed out in review
v2:
- Rebase on master
- Get uart receive working
Alistair Francis (10):
riscv/boot: Add a missing header include
target/riscv: Don't overwrite the reset vector
target/riscv: Disable the MMU correctly
target/riscv: Add the lowRISC Ibex CPU
riscv: Initial commit of OpenTitan machine
hw/char: Initial commit of Ibex UART
hw/intc: Initial commit of lowRISC Ibex PLIC
riscv/opentitan: Connect the PLIC device
riscv/opentitan: Connect the UART device
target/riscv: Use a smaller guess size for no-MMU PMP
default-configs/riscv32-softmmu.mak | 1 +
default-configs/riscv64-softmmu.mak | 11 +-
include/hw/char/ibex_uart.h | 110 +++++++
include/hw/intc/ibex_plic.h | 63 ++++
include/hw/riscv/boot.h | 1 +
include/hw/riscv/opentitan.h | 79 +++++
target/riscv/cpu.h | 1 +
hw/char/ibex_uart.c | 492 ++++++++++++++++++++++++++++
hw/intc/ibex_plic.c | 261 +++++++++++++++
hw/riscv/opentitan.c | 204 ++++++++++++
target/riscv/cpu.c | 21 +-
target/riscv/pmp.c | 14 +-
MAINTAINERS | 13 +
hw/char/Makefile.objs | 1 +
hw/intc/Makefile.objs | 1 +
hw/riscv/Kconfig | 9 +
hw/riscv/Makefile.objs | 1 +
17 files changed, 1272 insertions(+), 11 deletions(-)
create mode 100644 include/hw/char/ibex_uart.h
create mode 100644 include/hw/intc/ibex_plic.h
create mode 100644 include/hw/riscv/opentitan.h
create mode 100644 hw/char/ibex_uart.c
create mode 100644 hw/intc/ibex_plic.c
create mode 100644 hw/riscv/opentitan.c
--
2.26.2
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v4 01/10] riscv/boot: Add a missing header include
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
As the functions declared in this header use the symbol_fn_t
typedef itself declared in "hw/loader.h", we need to include
it here to make the header file self-contained.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---
include/hw/riscv/boot.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index 474a940ad5..9daa98da08 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -21,6 +21,7 @@
#define RISCV_BOOT_H
#include "exec/cpu-defs.h"
+#include "hw/loader.h"
void riscv_find_and_load_firmware(MachineState *machine,
const char *default_machine_firmware,
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 01/10] riscv/boot: Add a missing header include
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
As the functions declared in this header use the symbol_fn_t
typedef itself declared in "hw/loader.h", we need to include
it here to make the header file self-contained.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---
include/hw/riscv/boot.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index 474a940ad5..9daa98da08 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -21,6 +21,7 @@
#define RISCV_BOOT_H
#include "exec/cpu-defs.h"
+#include "hw/loader.h"
void riscv_find_and_load_firmware(MachineState *machine,
const char *default_machine_firmware,
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 02/10] target/riscv: Don't overwrite the reset vector
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
The reset vector is set in the init function don't set it again in
realize.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---
target/riscv/cpu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 059d71f2c7..5eb3c02735 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -133,6 +133,7 @@ static void riscv_base32_cpu_init(Object *obj)
CPURISCVState *env = &RISCV_CPU(obj)->env;
/* We set this in the realise function */
set_misa(env, 0);
+ set_resetvec(env, DEFAULT_RSTVEC);
}
static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
@@ -180,6 +181,7 @@ static void riscv_base64_cpu_init(Object *obj)
CPURISCVState *env = &RISCV_CPU(obj)->env;
/* We set this in the realise function */
set_misa(env, 0);
+ set_resetvec(env, DEFAULT_RSTVEC);
}
static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
@@ -399,7 +401,6 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
}
set_priv_version(env, priv_version);
- set_resetvec(env, DEFAULT_RSTVEC);
if (cpu->cfg.mmu) {
set_feature(env, RISCV_FEATURE_MMU);
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 02/10] target/riscv: Don't overwrite the reset vector
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
The reset vector is set in the init function don't set it again in
realize.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---
target/riscv/cpu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 059d71f2c7..5eb3c02735 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -133,6 +133,7 @@ static void riscv_base32_cpu_init(Object *obj)
CPURISCVState *env = &RISCV_CPU(obj)->env;
/* We set this in the realise function */
set_misa(env, 0);
+ set_resetvec(env, DEFAULT_RSTVEC);
}
static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
@@ -180,6 +181,7 @@ static void riscv_base64_cpu_init(Object *obj)
CPURISCVState *env = &RISCV_CPU(obj)->env;
/* We set this in the realise function */
set_misa(env, 0);
+ set_resetvec(env, DEFAULT_RSTVEC);
}
static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
@@ -399,7 +401,6 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
}
set_priv_version(env, priv_version);
- set_resetvec(env, DEFAULT_RSTVEC);
if (cpu->cfg.mmu) {
set_feature(env, RISCV_FEATURE_MMU);
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 03/10] target/riscv: Disable the MMU correctly
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
Previously if we didn't enable the MMU it would be enabled in the
realize() function anyway. Let's ensure that if we don't want the MMU we
disable it. We also don't need to enable the MMU as it will be enalbed
in realize() by default.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 5eb3c02735..8deba3d16d 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -142,7 +142,6 @@ static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_09_1);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -152,7 +151,6 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -163,6 +161,7 @@ static void rv32imacu_nommu_cpu_init(Object *obj)
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
}
static void rv32imafcu_nommu_cpu_init(Object *obj)
@@ -172,6 +171,7 @@ static void rv32imafcu_nommu_cpu_init(Object *obj)
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
}
#elif defined(TARGET_RISCV64)
@@ -190,7 +190,6 @@ static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_09_1);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -200,7 +199,6 @@ static void rv64gcsu_priv1_10_0_cpu_init(Object *obj)
set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -211,6 +209,7 @@ static void rv64imacu_nommu_cpu_init(Object *obj)
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
}
#endif
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 03/10] target/riscv: Disable the MMU correctly
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
Previously if we didn't enable the MMU it would be enabled in the
realize() function anyway. Let's ensure that if we don't want the MMU we
disable it. We also don't need to enable the MMU as it will be enalbed
in realize() by default.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 5eb3c02735..8deba3d16d 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -142,7 +142,6 @@ static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_09_1);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -152,7 +151,6 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -163,6 +161,7 @@ static void rv32imacu_nommu_cpu_init(Object *obj)
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
}
static void rv32imafcu_nommu_cpu_init(Object *obj)
@@ -172,6 +171,7 @@ static void rv32imafcu_nommu_cpu_init(Object *obj)
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
}
#elif defined(TARGET_RISCV64)
@@ -190,7 +190,6 @@ static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_09_1);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -200,7 +199,6 @@ static void rv64gcsu_priv1_10_0_cpu_init(Object *obj)
set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
- set_feature(env, RISCV_FEATURE_MMU);
set_feature(env, RISCV_FEATURE_PMP);
}
@@ -211,6 +209,7 @@ static void rv64imacu_nommu_cpu_init(Object *obj)
set_priv_version(env, PRIV_VERSION_1_10_0);
set_resetvec(env, DEFAULT_RSTVEC);
set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
}
#endif
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v4 03/10] target/riscv: Disable the MMU correctly
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-28 2:32 ` Bin Meng
-1 siblings, 0 replies; 28+ messages in thread
From: Bin Meng @ 2020-05-28 2:32 UTC (permalink / raw)
To: Alistair Francis
Cc: Palmer Dabbelt, open list:RISC-V,
qemu-devel@nongnu.org Developers, Alistair Francis
On Thu, May 28, 2020 at 12:58 AM Alistair Francis
<alistair.francis@wdc.com> wrote:
>
> Previously if we didn't enable the MMU it would be enabled in the
> realize() function anyway. Let's ensure that if we don't want the MMU we
> disable it. We also don't need to enable the MMU as it will be enalbed
> in realize() by default.
>
I think we should do the same for the PMP feature as the logic is the
same as MMU: PMP is always enabled in the realize() function
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> target/riscv/cpu.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 5eb3c02735..8deba3d16d 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -142,7 +142,6 @@ static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
> set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_09_1);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -152,7 +151,6 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
> set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -163,6 +161,7 @@ static void rv32imacu_nommu_cpu_init(Object *obj)
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> set_feature(env, RISCV_FEATURE_PMP);
> + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> }
>
> static void rv32imafcu_nommu_cpu_init(Object *obj)
> @@ -172,6 +171,7 @@ static void rv32imafcu_nommu_cpu_init(Object *obj)
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> set_feature(env, RISCV_FEATURE_PMP);
> + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> }
>
> #elif defined(TARGET_RISCV64)
> @@ -190,7 +190,6 @@ static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
> set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_09_1);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -200,7 +199,6 @@ static void rv64gcsu_priv1_10_0_cpu_init(Object *obj)
> set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -211,6 +209,7 @@ static void rv64imacu_nommu_cpu_init(Object *obj)
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> set_feature(env, RISCV_FEATURE_PMP);
> + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> }
>
Regards,
Bin
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 03/10] target/riscv: Disable the MMU correctly
@ 2020-05-28 2:32 ` Bin Meng
0 siblings, 0 replies; 28+ messages in thread
From: Bin Meng @ 2020-05-28 2:32 UTC (permalink / raw)
To: Alistair Francis
Cc: qemu-devel@nongnu.org Developers, open list:RISC-V,
Palmer Dabbelt, Alistair Francis
On Thu, May 28, 2020 at 12:58 AM Alistair Francis
<alistair.francis@wdc.com> wrote:
>
> Previously if we didn't enable the MMU it would be enabled in the
> realize() function anyway. Let's ensure that if we don't want the MMU we
> disable it. We also don't need to enable the MMU as it will be enalbed
> in realize() by default.
>
I think we should do the same for the PMP feature as the logic is the
same as MMU: PMP is always enabled in the realize() function
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> target/riscv/cpu.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 5eb3c02735..8deba3d16d 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -142,7 +142,6 @@ static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
> set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_09_1);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -152,7 +151,6 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
> set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -163,6 +161,7 @@ static void rv32imacu_nommu_cpu_init(Object *obj)
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> set_feature(env, RISCV_FEATURE_PMP);
> + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> }
>
> static void rv32imafcu_nommu_cpu_init(Object *obj)
> @@ -172,6 +171,7 @@ static void rv32imafcu_nommu_cpu_init(Object *obj)
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> set_feature(env, RISCV_FEATURE_PMP);
> + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> }
>
> #elif defined(TARGET_RISCV64)
> @@ -190,7 +190,6 @@ static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
> set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_09_1);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -200,7 +199,6 @@ static void rv64gcsu_priv1_10_0_cpu_init(Object *obj)
> set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> - set_feature(env, RISCV_FEATURE_MMU);
> set_feature(env, RISCV_FEATURE_PMP);
> }
>
> @@ -211,6 +209,7 @@ static void rv64imacu_nommu_cpu_init(Object *obj)
> set_priv_version(env, PRIV_VERSION_1_10_0);
> set_resetvec(env, DEFAULT_RSTVEC);
> set_feature(env, RISCV_FEATURE_PMP);
> + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> }
>
Regards,
Bin
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 03/10] target/riscv: Disable the MMU correctly
2020-05-28 2:32 ` Bin Meng
@ 2020-05-28 18:14 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-28 18:14 UTC (permalink / raw)
To: Bin Meng
Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
qemu-devel@nongnu.org Developers
On Wed, May 27, 2020 at 7:32 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> On Thu, May 28, 2020 at 12:58 AM Alistair Francis
> <alistair.francis@wdc.com> wrote:
> >
> > Previously if we didn't enable the MMU it would be enabled in the
> > realize() function anyway. Let's ensure that if we don't want the MMU we
> > disable it. We also don't need to enable the MMU as it will be enalbed
> > in realize() by default.
> >
>
> I think we should do the same for the PMP feature as the logic is the
> same as MMU: PMP is always enabled in the realize() function
Done!
Alistair
>
> > Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> > ---
> > target/riscv/cpu.c | 7 +++----
> > 1 file changed, 3 insertions(+), 4 deletions(-)
> >
> > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> > index 5eb3c02735..8deba3d16d 100644
> > --- a/target/riscv/cpu.c
> > +++ b/target/riscv/cpu.c
> > @@ -142,7 +142,6 @@ static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
> > set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_09_1);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -152,7 +151,6 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
> > set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -163,6 +161,7 @@ static void rv32imacu_nommu_cpu_init(Object *obj)
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > set_feature(env, RISCV_FEATURE_PMP);
> > + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> > }
> >
> > static void rv32imafcu_nommu_cpu_init(Object *obj)
> > @@ -172,6 +171,7 @@ static void rv32imafcu_nommu_cpu_init(Object *obj)
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > set_feature(env, RISCV_FEATURE_PMP);
> > + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> > }
> >
> > #elif defined(TARGET_RISCV64)
> > @@ -190,7 +190,6 @@ static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
> > set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_09_1);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -200,7 +199,6 @@ static void rv64gcsu_priv1_10_0_cpu_init(Object *obj)
> > set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -211,6 +209,7 @@ static void rv64imacu_nommu_cpu_init(Object *obj)
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > set_feature(env, RISCV_FEATURE_PMP);
> > + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> > }
> >
>
> Regards,
> Bin
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 03/10] target/riscv: Disable the MMU correctly
@ 2020-05-28 18:14 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-28 18:14 UTC (permalink / raw)
To: Bin Meng
Cc: Alistair Francis, qemu-devel@nongnu.org Developers,
open list:RISC-V, Palmer Dabbelt
On Wed, May 27, 2020 at 7:32 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> On Thu, May 28, 2020 at 12:58 AM Alistair Francis
> <alistair.francis@wdc.com> wrote:
> >
> > Previously if we didn't enable the MMU it would be enabled in the
> > realize() function anyway. Let's ensure that if we don't want the MMU we
> > disable it. We also don't need to enable the MMU as it will be enalbed
> > in realize() by default.
> >
>
> I think we should do the same for the PMP feature as the logic is the
> same as MMU: PMP is always enabled in the realize() function
Done!
Alistair
>
> > Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> > ---
> > target/riscv/cpu.c | 7 +++----
> > 1 file changed, 3 insertions(+), 4 deletions(-)
> >
> > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> > index 5eb3c02735..8deba3d16d 100644
> > --- a/target/riscv/cpu.c
> > +++ b/target/riscv/cpu.c
> > @@ -142,7 +142,6 @@ static void rv32gcsu_priv1_09_1_cpu_init(Object *obj)
> > set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_09_1);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -152,7 +151,6 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
> > set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -163,6 +161,7 @@ static void rv32imacu_nommu_cpu_init(Object *obj)
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > set_feature(env, RISCV_FEATURE_PMP);
> > + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> > }
> >
> > static void rv32imafcu_nommu_cpu_init(Object *obj)
> > @@ -172,6 +171,7 @@ static void rv32imafcu_nommu_cpu_init(Object *obj)
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > set_feature(env, RISCV_FEATURE_PMP);
> > + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> > }
> >
> > #elif defined(TARGET_RISCV64)
> > @@ -190,7 +190,6 @@ static void rv64gcsu_priv1_09_1_cpu_init(Object *obj)
> > set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_09_1);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -200,7 +199,6 @@ static void rv64gcsu_priv1_10_0_cpu_init(Object *obj)
> > set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > - set_feature(env, RISCV_FEATURE_MMU);
> > set_feature(env, RISCV_FEATURE_PMP);
> > }
> >
> > @@ -211,6 +209,7 @@ static void rv64imacu_nommu_cpu_init(Object *obj)
> > set_priv_version(env, PRIV_VERSION_1_10_0);
> > set_resetvec(env, DEFAULT_RSTVEC);
> > set_feature(env, RISCV_FEATURE_PMP);
> > + qdev_prop_set_bit(DEVICE(obj), "mmu", false);
> > }
> >
>
> Regards,
> Bin
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v4 04/10] target/riscv: Add the lowRISC Ibex CPU
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
Ibex is a small and efficient, 32-bit, in-order RISC-V core with
a 2-stage pipeline that implements the RV32IMC instruction set
architecture.
For more details on lowRISC see here:
https://github.com/lowRISC/ibex
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
---
target/riscv/cpu.h | 1 +
target/riscv/cpu.c | 11 +++++++++++
2 files changed, 12 insertions(+)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index d0e7f5b9c5..8733d7467f 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -35,6 +35,7 @@
#define TYPE_RISCV_CPU_ANY RISCV_CPU_TYPE_NAME("any")
#define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32")
#define TYPE_RISCV_CPU_BASE64 RISCV_CPU_TYPE_NAME("rv64")
+#define TYPE_RISCV_CPU_IBEX RISCV_CPU_TYPE_NAME("lowrisc-ibex")
#define TYPE_RISCV_CPU_SIFIVE_E31 RISCV_CPU_TYPE_NAME("sifive-e31")
#define TYPE_RISCV_CPU_SIFIVE_E34 RISCV_CPU_TYPE_NAME("sifive-e34")
#define TYPE_RISCV_CPU_SIFIVE_E51 RISCV_CPU_TYPE_NAME("sifive-e51")
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 8deba3d16d..4761ebad42 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -154,6 +154,16 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
set_feature(env, RISCV_FEATURE_PMP);
}
+static void rv32imcu_nommu_cpu_init(Object *obj)
+{
+ CPURISCVState *env = &RISCV_CPU(obj)->env;
+ set_misa(env, RV32 | RVI | RVM | RVC | RVU);
+ set_priv_version(env, PRIV_VERSION_1_10_0);
+ set_resetvec(env, 0x8090);
+ set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
+}
+
static void rv32imacu_nommu_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
@@ -618,6 +628,7 @@ static const TypeInfo riscv_cpu_type_infos[] = {
DEFINE_CPU(TYPE_RISCV_CPU_ANY, riscv_any_cpu_init),
#if defined(TARGET_RISCV32)
DEFINE_CPU(TYPE_RISCV_CPU_BASE32, riscv_base32_cpu_init),
+ DEFINE_CPU(TYPE_RISCV_CPU_IBEX, rv32imcu_nommu_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31, rv32imacu_nommu_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34, rv32imafcu_nommu_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34, rv32gcsu_priv1_10_0_cpu_init),
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 04/10] target/riscv: Add the lowRISC Ibex CPU
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
Ibex is a small and efficient, 32-bit, in-order RISC-V core with
a 2-stage pipeline that implements the RV32IMC instruction set
architecture.
For more details on lowRISC see here:
https://github.com/lowRISC/ibex
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
---
target/riscv/cpu.h | 1 +
target/riscv/cpu.c | 11 +++++++++++
2 files changed, 12 insertions(+)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index d0e7f5b9c5..8733d7467f 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -35,6 +35,7 @@
#define TYPE_RISCV_CPU_ANY RISCV_CPU_TYPE_NAME("any")
#define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32")
#define TYPE_RISCV_CPU_BASE64 RISCV_CPU_TYPE_NAME("rv64")
+#define TYPE_RISCV_CPU_IBEX RISCV_CPU_TYPE_NAME("lowrisc-ibex")
#define TYPE_RISCV_CPU_SIFIVE_E31 RISCV_CPU_TYPE_NAME("sifive-e31")
#define TYPE_RISCV_CPU_SIFIVE_E34 RISCV_CPU_TYPE_NAME("sifive-e34")
#define TYPE_RISCV_CPU_SIFIVE_E51 RISCV_CPU_TYPE_NAME("sifive-e51")
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 8deba3d16d..4761ebad42 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -154,6 +154,16 @@ static void rv32gcsu_priv1_10_0_cpu_init(Object *obj)
set_feature(env, RISCV_FEATURE_PMP);
}
+static void rv32imcu_nommu_cpu_init(Object *obj)
+{
+ CPURISCVState *env = &RISCV_CPU(obj)->env;
+ set_misa(env, RV32 | RVI | RVM | RVC | RVU);
+ set_priv_version(env, PRIV_VERSION_1_10_0);
+ set_resetvec(env, 0x8090);
+ set_feature(env, RISCV_FEATURE_PMP);
+ qdev_prop_set_bit(DEVICE(obj), "mmu", false);
+}
+
static void rv32imacu_nommu_cpu_init(Object *obj)
{
CPURISCVState *env = &RISCV_CPU(obj)->env;
@@ -618,6 +628,7 @@ static const TypeInfo riscv_cpu_type_infos[] = {
DEFINE_CPU(TYPE_RISCV_CPU_ANY, riscv_any_cpu_init),
#if defined(TARGET_RISCV32)
DEFINE_CPU(TYPE_RISCV_CPU_BASE32, riscv_base32_cpu_init),
+ DEFINE_CPU(TYPE_RISCV_CPU_IBEX, rv32imcu_nommu_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31, rv32imacu_nommu_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34, rv32imafcu_nommu_cpu_init),
DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34, rv32gcsu_priv1_10_0_cpu_init),
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 05/10] riscv: Initial commit of OpenTitan machine
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
This adds a barebone OpenTitan machine to QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---
default-configs/riscv32-softmmu.mak | 1 +
default-configs/riscv64-softmmu.mak | 11 +-
include/hw/riscv/opentitan.h | 63 +++++++++++
hw/riscv/opentitan.c | 169 ++++++++++++++++++++++++++++
MAINTAINERS | 9 ++
hw/riscv/Kconfig | 5 +
hw/riscv/Makefile.objs | 1 +
7 files changed, 258 insertions(+), 1 deletion(-)
create mode 100644 include/hw/riscv/opentitan.h
create mode 100644 hw/riscv/opentitan.c
diff --git a/default-configs/riscv32-softmmu.mak b/default-configs/riscv32-softmmu.mak
index 1ae077ed87..94a236c9c2 100644
--- a/default-configs/riscv32-softmmu.mak
+++ b/default-configs/riscv32-softmmu.mak
@@ -10,3 +10,4 @@ CONFIG_SPIKE=y
CONFIG_SIFIVE_E=y
CONFIG_SIFIVE_U=y
CONFIG_RISCV_VIRT=y
+CONFIG_OPENTITAN=y
diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak
index 235c6f473f..aaf6d735bb 100644
--- a/default-configs/riscv64-softmmu.mak
+++ b/default-configs/riscv64-softmmu.mak
@@ -1,3 +1,12 @@
# Default configuration for riscv64-softmmu
-include riscv32-softmmu.mak
+# Uncomment the following lines to disable these optional devices:
+#
+#CONFIG_PCI_DEVICES=n
+
+# Boards:
+#
+CONFIG_SPIKE=y
+CONFIG_SIFIVE_E=y
+CONFIG_SIFIVE_U=y
+CONFIG_RISCV_VIRT=y
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
new file mode 100644
index 0000000000..15a3d87ed0
--- /dev/null
+++ b/include/hw/riscv/opentitan.h
@@ -0,0 +1,63 @@
+/*
+ * QEMU RISC-V Board Compatible with OpenTitan FPGA platform
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_OPENTITAN_H
+#define HW_OPENTITAN_H
+
+#include "hw/riscv/riscv_hart.h"
+
+#define TYPE_RISCV_IBEX_SOC "riscv.lowrisc.ibex.soc"
+#define RISCV_IBEX_SOC(obj) \
+ OBJECT_CHECK(LowRISCIbexSoCState, (obj), TYPE_RISCV_IBEX_SOC)
+
+typedef struct LowRISCIbexSoCState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ RISCVHartArrayState cpus;
+ MemoryRegion flash_mem;
+ MemoryRegion rom;
+} LowRISCIbexSoCState;
+
+typedef struct OpenTitanState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ LowRISCIbexSoCState soc;
+} OpenTitanState;
+
+enum {
+ IBEX_ROM,
+ IBEX_RAM,
+ IBEX_FLASH,
+ IBEX_UART,
+ IBEX_GPIO,
+ IBEX_SPI,
+ IBEX_FLASH_CTRL,
+ IBEX_RV_TIMER,
+ IBEX_AES,
+ IBEX_HMAC,
+ IBEX_PLIC,
+ IBEX_PINMUX,
+ IBEX_ALERT_HANDLER,
+ IBEX_USBDEV,
+};
+
+#endif
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
new file mode 100644
index 0000000000..c00f0720ab
--- /dev/null
+++ b/hw/riscv/opentitan.c
@@ -0,0 +1,169 @@
+/*
+ * QEMU RISC-V Board Compatible with OpenTitan FPGA platform
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Provides a board compatible with the OpenTitan FPGA platform:
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/riscv/opentitan.h"
+#include "qapi/error.h"
+#include "hw/boards.h"
+#include "hw/misc/unimp.h"
+#include "hw/riscv/boot.h"
+#include "exec/address-spaces.h"
+
+static const struct MemmapEntry {
+ hwaddr base;
+ hwaddr size;
+} ibex_memmap[] = {
+ [IBEX_ROM] = { 0x00008000, 0xc000 },
+ [IBEX_RAM] = { 0x10000000, 0x10000 },
+ [IBEX_FLASH] = { 0x20000000, 0x80000 },
+ [IBEX_UART] = { 0x40000000, 0x10000 },
+ [IBEX_GPIO] = { 0x40010000, 0x10000 },
+ [IBEX_SPI] = { 0x40020000, 0x10000 },
+ [IBEX_FLASH_CTRL] = { 0x40030000, 0x10000 },
+ [IBEX_PINMUX] = { 0x40070000, 0x10000 },
+ [IBEX_RV_TIMER] = { 0x40080000, 0x10000 },
+ [IBEX_PLIC] = { 0x40090000, 0x10000 },
+ [IBEX_AES] = { 0x40110000, 0x10000 },
+ [IBEX_HMAC] = { 0x40120000, 0x10000 },
+ [IBEX_ALERT_HANDLER] = { 0x40130000, 0x10000 },
+ [IBEX_USBDEV] = { 0x40150000, 0x10000 }
+};
+
+static void riscv_opentitan_init(MachineState *machine)
+{
+ const struct MemmapEntry *memmap = ibex_memmap;
+ OpenTitanState *s = g_new0(OpenTitanState, 1);
+ MemoryRegion *sys_mem = get_system_memory();
+ MemoryRegion *main_mem = g_new(MemoryRegion, 1);
+
+ /* Initialize SoC */
+ object_initialize_child(OBJECT(machine), "soc", &s->soc,
+ sizeof(s->soc), TYPE_RISCV_IBEX_SOC,
+ &error_abort, NULL);
+ object_property_set_bool(OBJECT(&s->soc), true, "realized",
+ &error_abort);
+
+ memory_region_init_ram(main_mem, NULL, "riscv.lowrisc.ibex.ram",
+ memmap[IBEX_RAM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem,
+ memmap[IBEX_RAM].base, main_mem);
+
+
+ if (machine->firmware) {
+ riscv_load_firmware(machine->firmware, memmap[IBEX_RAM].base, NULL);
+ }
+
+ if (machine->kernel_filename) {
+ riscv_load_kernel(machine->kernel_filename, NULL);
+ }
+}
+
+static void riscv_opentitan_machine_init(MachineClass *mc)
+{
+ mc->desc = "RISC-V Board compatible with OpenTitan";
+ mc->init = riscv_opentitan_init;
+ mc->max_cpus = 1;
+ mc->default_cpu_type = TYPE_RISCV_CPU_IBEX;
+}
+
+DEFINE_MACHINE("opentitan", riscv_opentitan_machine_init)
+
+static void riscv_lowrisc_ibex_soc_init(Object *obj)
+{
+ LowRISCIbexSoCState *s = RISCV_IBEX_SOC(obj);
+
+ object_initialize_child(obj, "cpus", &s->cpus,
+ sizeof(s->cpus), TYPE_RISCV_HART_ARRAY,
+ &error_abort, NULL);
+}
+
+static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
+{
+ const struct MemmapEntry *memmap = ibex_memmap;
+ MachineState *ms = MACHINE(qdev_get_machine());
+ LowRISCIbexSoCState *s = RISCV_IBEX_SOC(dev_soc);
+ MemoryRegion *sys_mem = get_system_memory();
+
+ object_property_set_str(OBJECT(&s->cpus), ms->cpu_type, "cpu-type",
+ &error_abort);
+ object_property_set_int(OBJECT(&s->cpus), ms->smp.cpus, "num-harts",
+ &error_abort);
+ object_property_set_bool(OBJECT(&s->cpus), true, "realized",
+ &error_abort);
+
+ /* Boot ROM */
+ memory_region_init_rom(&s->rom, OBJECT(dev_soc), "riscv.lowrisc.ibex.rom",
+ memmap[IBEX_ROM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem,
+ memmap[IBEX_ROM].base, &s->rom);
+
+ /* Flash memory */
+ memory_region_init_rom(&s->flash_mem, OBJECT(dev_soc), "riscv.lowrisc.ibex.flash",
+ memmap[IBEX_FLASH].size, &error_fatal);
+ memory_region_add_subregion(sys_mem, memmap[IBEX_FLASH].base,
+ &s->flash_mem);
+
+ create_unimplemented_device("riscv.lowrisc.ibex.uart",
+ memmap[IBEX_UART].base, memmap[IBEX_UART].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.gpio",
+ memmap[IBEX_GPIO].base, memmap[IBEX_GPIO].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.spi",
+ memmap[IBEX_SPI].base, memmap[IBEX_SPI].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.flash_ctrl",
+ memmap[IBEX_FLASH_CTRL].base, memmap[IBEX_FLASH_CTRL].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.rv_timer",
+ memmap[IBEX_RV_TIMER].base, memmap[IBEX_RV_TIMER].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.aes",
+ memmap[IBEX_AES].base, memmap[IBEX_AES].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.hmac",
+ memmap[IBEX_HMAC].base, memmap[IBEX_HMAC].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.plic",
+ memmap[IBEX_PLIC].base, memmap[IBEX_PLIC].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.pinmux",
+ memmap[IBEX_PINMUX].base, memmap[IBEX_PINMUX].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.alert_handler",
+ memmap[IBEX_ALERT_HANDLER].base, memmap[IBEX_ALERT_HANDLER].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.USBDEV",
+ memmap[IBEX_USBDEV].base, memmap[IBEX_USBDEV].size);
+}
+
+static void riscv_lowrisc_ibex_soc_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = riscv_lowrisc_ibex_soc_realize;
+ /* Reason: Uses serial_hds in realize function, thus can't be used twice */
+ dc->user_creatable = false;
+}
+
+static const TypeInfo riscv_lowrisc_ibex_soc_type_info = {
+ .name = TYPE_RISCV_IBEX_SOC,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(LowRISCIbexSoCState),
+ .instance_init = riscv_lowrisc_ibex_soc_init,
+ .class_init = riscv_lowrisc_ibex_soc_class_init,
+};
+
+static void riscv_lowrisc_ibex_soc_register_types(void)
+{
+ type_register_static(&riscv_lowrisc_ibex_soc_type_info);
+}
+
+type_init(riscv_lowrisc_ibex_soc_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3690f313c3..668e664fa5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1236,6 +1236,15 @@ F: pc-bios/canyonlands.dt[sb]
F: pc-bios/u-boot-sam460ex-20100605.bin
F: roms/u-boot-sam460ex
+RISC-V Machines
+---------------
+OpenTitan
+M: Alistair Francis <Alistair.Francis@wdc.com>
+L: qemu-riscv@nongnu.org
+S: Supported
+F: hw/riscv/opentitan.c
+F: include/hw/riscv/opentitan.h
+
SH4 Machines
------------
R2D
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index ff9fbe958a..94d19571f7 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -27,6 +27,11 @@ config SPIKE
select HTIF
select SIFIVE
+config OPENTITAN
+ bool
+ select HART
+ select UNIMP
+
config RISCV_VIRT
bool
imply PCI_DEVICES
diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
index fc3c6dd7c8..57cc708f5d 100644
--- a/hw/riscv/Makefile.objs
+++ b/hw/riscv/Makefile.objs
@@ -1,6 +1,7 @@
obj-y += boot.o
obj-$(CONFIG_SPIKE) += riscv_htif.o
obj-$(CONFIG_HART) += riscv_hart.o
+obj-$(CONFIG_OPENTITAN) += opentitan.o
obj-$(CONFIG_SIFIVE_E) += sifive_e.o
obj-$(CONFIG_SIFIVE_E) += sifive_e_prci.o
obj-$(CONFIG_SIFIVE) += sifive_clint.o
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 05/10] riscv: Initial commit of OpenTitan machine
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
This adds a barebone OpenTitan machine to QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---
default-configs/riscv32-softmmu.mak | 1 +
default-configs/riscv64-softmmu.mak | 11 +-
include/hw/riscv/opentitan.h | 63 +++++++++++
hw/riscv/opentitan.c | 169 ++++++++++++++++++++++++++++
MAINTAINERS | 9 ++
hw/riscv/Kconfig | 5 +
hw/riscv/Makefile.objs | 1 +
7 files changed, 258 insertions(+), 1 deletion(-)
create mode 100644 include/hw/riscv/opentitan.h
create mode 100644 hw/riscv/opentitan.c
diff --git a/default-configs/riscv32-softmmu.mak b/default-configs/riscv32-softmmu.mak
index 1ae077ed87..94a236c9c2 100644
--- a/default-configs/riscv32-softmmu.mak
+++ b/default-configs/riscv32-softmmu.mak
@@ -10,3 +10,4 @@ CONFIG_SPIKE=y
CONFIG_SIFIVE_E=y
CONFIG_SIFIVE_U=y
CONFIG_RISCV_VIRT=y
+CONFIG_OPENTITAN=y
diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak
index 235c6f473f..aaf6d735bb 100644
--- a/default-configs/riscv64-softmmu.mak
+++ b/default-configs/riscv64-softmmu.mak
@@ -1,3 +1,12 @@
# Default configuration for riscv64-softmmu
-include riscv32-softmmu.mak
+# Uncomment the following lines to disable these optional devices:
+#
+#CONFIG_PCI_DEVICES=n
+
+# Boards:
+#
+CONFIG_SPIKE=y
+CONFIG_SIFIVE_E=y
+CONFIG_SIFIVE_U=y
+CONFIG_RISCV_VIRT=y
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
new file mode 100644
index 0000000000..15a3d87ed0
--- /dev/null
+++ b/include/hw/riscv/opentitan.h
@@ -0,0 +1,63 @@
+/*
+ * QEMU RISC-V Board Compatible with OpenTitan FPGA platform
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_OPENTITAN_H
+#define HW_OPENTITAN_H
+
+#include "hw/riscv/riscv_hart.h"
+
+#define TYPE_RISCV_IBEX_SOC "riscv.lowrisc.ibex.soc"
+#define RISCV_IBEX_SOC(obj) \
+ OBJECT_CHECK(LowRISCIbexSoCState, (obj), TYPE_RISCV_IBEX_SOC)
+
+typedef struct LowRISCIbexSoCState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ RISCVHartArrayState cpus;
+ MemoryRegion flash_mem;
+ MemoryRegion rom;
+} LowRISCIbexSoCState;
+
+typedef struct OpenTitanState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ LowRISCIbexSoCState soc;
+} OpenTitanState;
+
+enum {
+ IBEX_ROM,
+ IBEX_RAM,
+ IBEX_FLASH,
+ IBEX_UART,
+ IBEX_GPIO,
+ IBEX_SPI,
+ IBEX_FLASH_CTRL,
+ IBEX_RV_TIMER,
+ IBEX_AES,
+ IBEX_HMAC,
+ IBEX_PLIC,
+ IBEX_PINMUX,
+ IBEX_ALERT_HANDLER,
+ IBEX_USBDEV,
+};
+
+#endif
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
new file mode 100644
index 0000000000..c00f0720ab
--- /dev/null
+++ b/hw/riscv/opentitan.c
@@ -0,0 +1,169 @@
+/*
+ * QEMU RISC-V Board Compatible with OpenTitan FPGA platform
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Provides a board compatible with the OpenTitan FPGA platform:
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/riscv/opentitan.h"
+#include "qapi/error.h"
+#include "hw/boards.h"
+#include "hw/misc/unimp.h"
+#include "hw/riscv/boot.h"
+#include "exec/address-spaces.h"
+
+static const struct MemmapEntry {
+ hwaddr base;
+ hwaddr size;
+} ibex_memmap[] = {
+ [IBEX_ROM] = { 0x00008000, 0xc000 },
+ [IBEX_RAM] = { 0x10000000, 0x10000 },
+ [IBEX_FLASH] = { 0x20000000, 0x80000 },
+ [IBEX_UART] = { 0x40000000, 0x10000 },
+ [IBEX_GPIO] = { 0x40010000, 0x10000 },
+ [IBEX_SPI] = { 0x40020000, 0x10000 },
+ [IBEX_FLASH_CTRL] = { 0x40030000, 0x10000 },
+ [IBEX_PINMUX] = { 0x40070000, 0x10000 },
+ [IBEX_RV_TIMER] = { 0x40080000, 0x10000 },
+ [IBEX_PLIC] = { 0x40090000, 0x10000 },
+ [IBEX_AES] = { 0x40110000, 0x10000 },
+ [IBEX_HMAC] = { 0x40120000, 0x10000 },
+ [IBEX_ALERT_HANDLER] = { 0x40130000, 0x10000 },
+ [IBEX_USBDEV] = { 0x40150000, 0x10000 }
+};
+
+static void riscv_opentitan_init(MachineState *machine)
+{
+ const struct MemmapEntry *memmap = ibex_memmap;
+ OpenTitanState *s = g_new0(OpenTitanState, 1);
+ MemoryRegion *sys_mem = get_system_memory();
+ MemoryRegion *main_mem = g_new(MemoryRegion, 1);
+
+ /* Initialize SoC */
+ object_initialize_child(OBJECT(machine), "soc", &s->soc,
+ sizeof(s->soc), TYPE_RISCV_IBEX_SOC,
+ &error_abort, NULL);
+ object_property_set_bool(OBJECT(&s->soc), true, "realized",
+ &error_abort);
+
+ memory_region_init_ram(main_mem, NULL, "riscv.lowrisc.ibex.ram",
+ memmap[IBEX_RAM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem,
+ memmap[IBEX_RAM].base, main_mem);
+
+
+ if (machine->firmware) {
+ riscv_load_firmware(machine->firmware, memmap[IBEX_RAM].base, NULL);
+ }
+
+ if (machine->kernel_filename) {
+ riscv_load_kernel(machine->kernel_filename, NULL);
+ }
+}
+
+static void riscv_opentitan_machine_init(MachineClass *mc)
+{
+ mc->desc = "RISC-V Board compatible with OpenTitan";
+ mc->init = riscv_opentitan_init;
+ mc->max_cpus = 1;
+ mc->default_cpu_type = TYPE_RISCV_CPU_IBEX;
+}
+
+DEFINE_MACHINE("opentitan", riscv_opentitan_machine_init)
+
+static void riscv_lowrisc_ibex_soc_init(Object *obj)
+{
+ LowRISCIbexSoCState *s = RISCV_IBEX_SOC(obj);
+
+ object_initialize_child(obj, "cpus", &s->cpus,
+ sizeof(s->cpus), TYPE_RISCV_HART_ARRAY,
+ &error_abort, NULL);
+}
+
+static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
+{
+ const struct MemmapEntry *memmap = ibex_memmap;
+ MachineState *ms = MACHINE(qdev_get_machine());
+ LowRISCIbexSoCState *s = RISCV_IBEX_SOC(dev_soc);
+ MemoryRegion *sys_mem = get_system_memory();
+
+ object_property_set_str(OBJECT(&s->cpus), ms->cpu_type, "cpu-type",
+ &error_abort);
+ object_property_set_int(OBJECT(&s->cpus), ms->smp.cpus, "num-harts",
+ &error_abort);
+ object_property_set_bool(OBJECT(&s->cpus), true, "realized",
+ &error_abort);
+
+ /* Boot ROM */
+ memory_region_init_rom(&s->rom, OBJECT(dev_soc), "riscv.lowrisc.ibex.rom",
+ memmap[IBEX_ROM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem,
+ memmap[IBEX_ROM].base, &s->rom);
+
+ /* Flash memory */
+ memory_region_init_rom(&s->flash_mem, OBJECT(dev_soc), "riscv.lowrisc.ibex.flash",
+ memmap[IBEX_FLASH].size, &error_fatal);
+ memory_region_add_subregion(sys_mem, memmap[IBEX_FLASH].base,
+ &s->flash_mem);
+
+ create_unimplemented_device("riscv.lowrisc.ibex.uart",
+ memmap[IBEX_UART].base, memmap[IBEX_UART].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.gpio",
+ memmap[IBEX_GPIO].base, memmap[IBEX_GPIO].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.spi",
+ memmap[IBEX_SPI].base, memmap[IBEX_SPI].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.flash_ctrl",
+ memmap[IBEX_FLASH_CTRL].base, memmap[IBEX_FLASH_CTRL].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.rv_timer",
+ memmap[IBEX_RV_TIMER].base, memmap[IBEX_RV_TIMER].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.aes",
+ memmap[IBEX_AES].base, memmap[IBEX_AES].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.hmac",
+ memmap[IBEX_HMAC].base, memmap[IBEX_HMAC].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.plic",
+ memmap[IBEX_PLIC].base, memmap[IBEX_PLIC].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.pinmux",
+ memmap[IBEX_PINMUX].base, memmap[IBEX_PINMUX].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.alert_handler",
+ memmap[IBEX_ALERT_HANDLER].base, memmap[IBEX_ALERT_HANDLER].size);
+ create_unimplemented_device("riscv.lowrisc.ibex.USBDEV",
+ memmap[IBEX_USBDEV].base, memmap[IBEX_USBDEV].size);
+}
+
+static void riscv_lowrisc_ibex_soc_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = riscv_lowrisc_ibex_soc_realize;
+ /* Reason: Uses serial_hds in realize function, thus can't be used twice */
+ dc->user_creatable = false;
+}
+
+static const TypeInfo riscv_lowrisc_ibex_soc_type_info = {
+ .name = TYPE_RISCV_IBEX_SOC,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(LowRISCIbexSoCState),
+ .instance_init = riscv_lowrisc_ibex_soc_init,
+ .class_init = riscv_lowrisc_ibex_soc_class_init,
+};
+
+static void riscv_lowrisc_ibex_soc_register_types(void)
+{
+ type_register_static(&riscv_lowrisc_ibex_soc_type_info);
+}
+
+type_init(riscv_lowrisc_ibex_soc_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3690f313c3..668e664fa5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1236,6 +1236,15 @@ F: pc-bios/canyonlands.dt[sb]
F: pc-bios/u-boot-sam460ex-20100605.bin
F: roms/u-boot-sam460ex
+RISC-V Machines
+---------------
+OpenTitan
+M: Alistair Francis <Alistair.Francis@wdc.com>
+L: qemu-riscv@nongnu.org
+S: Supported
+F: hw/riscv/opentitan.c
+F: include/hw/riscv/opentitan.h
+
SH4 Machines
------------
R2D
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index ff9fbe958a..94d19571f7 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -27,6 +27,11 @@ config SPIKE
select HTIF
select SIFIVE
+config OPENTITAN
+ bool
+ select HART
+ select UNIMP
+
config RISCV_VIRT
bool
imply PCI_DEVICES
diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
index fc3c6dd7c8..57cc708f5d 100644
--- a/hw/riscv/Makefile.objs
+++ b/hw/riscv/Makefile.objs
@@ -1,6 +1,7 @@
obj-y += boot.o
obj-$(CONFIG_SPIKE) += riscv_htif.o
obj-$(CONFIG_HART) += riscv_hart.o
+obj-$(CONFIG_OPENTITAN) += opentitan.o
obj-$(CONFIG_SIFIVE_E) += sifive_e.o
obj-$(CONFIG_SIFIVE_E) += sifive_e_prci.o
obj-$(CONFIG_SIFIVE) += sifive_clint.o
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 06/10] hw/char: Initial commit of Ibex UART
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
This is the initial commit of the Ibex UART device. Serial TX is
working, while RX has been implemeneted but untested.
This is based on the documentation from:
https://docs.opentitan.org/hw/ip/uart/doc/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
include/hw/char/ibex_uart.h | 110 ++++++++
hw/char/ibex_uart.c | 492 ++++++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
hw/char/Makefile.objs | 1 +
hw/riscv/Kconfig | 4 +
5 files changed, 609 insertions(+)
create mode 100644 include/hw/char/ibex_uart.h
create mode 100644 hw/char/ibex_uart.c
diff --git a/include/hw/char/ibex_uart.h b/include/hw/char/ibex_uart.h
new file mode 100644
index 0000000000..2bec772615
--- /dev/null
+++ b/include/hw/char/ibex_uart.h
@@ -0,0 +1,110 @@
+/*
+ * QEMU lowRISC Ibex UART device
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_IBEX_UART_H
+#define HW_IBEX_UART_H
+
+#include "hw/sysbus.h"
+#include "chardev/char-fe.h"
+#include "qemu/timer.h"
+
+#define IBEX_UART_INTR_STATE 0x00
+ #define INTR_STATE_TX_WATERMARK (1 << 0)
+ #define INTR_STATE_RX_WATERMARK (1 << 1)
+ #define INTR_STATE_TX_EMPTY (1 << 2)
+ #define INTR_STATE_RX_OVERFLOW (1 << 3)
+#define IBEX_UART_INTR_ENABLE 0x04
+#define IBEX_UART_INTR_TEST 0x08
+
+#define IBEX_UART_CTRL 0x0c
+ #define UART_CTRL_TX_ENABLE (1 << 0)
+ #define UART_CTRL_RX_ENABLE (1 << 1)
+ #define UART_CTRL_NF (1 << 2)
+ #define UART_CTRL_SLPBK (1 << 4)
+ #define UART_CTRL_LLPBK (1 << 5)
+ #define UART_CTRL_PARITY_EN (1 << 6)
+ #define UART_CTRL_PARITY_ODD (1 << 7)
+ #define UART_CTRL_RXBLVL (3 << 8)
+ #define UART_CTRL_NCO (0xFFFF << 16)
+
+#define IBEX_UART_STATUS 0x10
+ #define UART_STATUS_TXFULL (1 << 0)
+ #define UART_STATUS_RXFULL (1 << 1)
+ #define UART_STATUS_TXEMPTY (1 << 2)
+ #define UART_STATUS_RXIDLE (1 << 4)
+ #define UART_STATUS_RXEMPTY (1 << 5)
+
+#define IBEX_UART_RDATA 0x14
+#define IBEX_UART_WDATA 0x18
+
+#define IBEX_UART_FIFO_CTRL 0x1c
+ #define FIFO_CTRL_RXRST (1 << 0)
+ #define FIFO_CTRL_TXRST (1 << 1)
+ #define FIFO_CTRL_RXILVL (7 << 2)
+ #define FIFO_CTRL_RXILVL_SHIFT (2)
+ #define FIFO_CTRL_TXILVL (3 << 5)
+ #define FIFO_CTRL_TXILVL_SHIFT (5)
+
+#define IBEX_UART_FIFO_STATUS 0x20
+#define IBEX_UART_OVRD 0x24
+#define IBEX_UART_VAL 0x28
+#define IBEX_UART_TIMEOUT_CTRL 0x2c
+
+#define IBEX_UART_TX_FIFO_SIZE 16
+
+#define TYPE_IBEX_UART "ibex-uart"
+#define IBEX_UART(obj) \
+ OBJECT_CHECK(IbexUartState, (obj), TYPE_IBEX_UART)
+
+typedef struct {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion mmio;
+
+ uint8_t tx_fifo[IBEX_UART_TX_FIFO_SIZE];
+ uint32_t tx_level;
+
+ QEMUTimer *fifo_trigger_handle;
+ uint64_t char_tx_time;
+
+ uint32_t uart_intr_state;
+ uint32_t uart_intr_enable;
+ uint32_t uart_ctrl;
+ uint32_t uart_status;
+ uint32_t uart_rdata;
+ uint32_t uart_fifo_ctrl;
+ uint32_t uart_fifo_status;
+ uint32_t uart_ovrd;
+ uint32_t uart_val;
+ uint32_t uart_timeout_ctrl;
+
+ CharBackend chr;
+ qemu_irq tx_watermark;
+ qemu_irq rx_watermark;
+ qemu_irq tx_empty;
+ qemu_irq rx_overflow;
+} IbexUartState;
+#endif /* HW_IBEX_UART_H */
diff --git a/hw/char/ibex_uart.c b/hw/char/ibex_uart.c
new file mode 100644
index 0000000000..c416325d73
--- /dev/null
+++ b/hw/char/ibex_uart.c
@@ -0,0 +1,492 @@
+/*
+ * QEMU lowRISC Ibex UART device
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * For details check the documentation here:
+ * https://docs.opentitan.org/hw/ip/uart/doc/
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/char/ibex_uart.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "migration/vmstate.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+
+static void ibex_uart_update_irqs(IbexUartState *s)
+{
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_TX_WATERMARK) {
+ qemu_set_irq(s->tx_watermark, 1);
+ } else {
+ qemu_set_irq(s->tx_watermark, 0);
+ }
+
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_RX_WATERMARK) {
+ qemu_set_irq(s->rx_watermark, 1);
+ } else {
+ qemu_set_irq(s->rx_watermark, 0);
+ }
+
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_TX_EMPTY) {
+ qemu_set_irq(s->tx_empty, 1);
+ } else {
+ qemu_set_irq(s->tx_empty, 0);
+ }
+
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_RX_OVERFLOW) {
+ qemu_set_irq(s->rx_overflow, 1);
+ } else {
+ qemu_set_irq(s->rx_overflow, 0);
+ }
+}
+
+static int ibex_uart_can_receive(void *opaque)
+{
+ IbexUartState *s = opaque;
+
+ if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
+ return 1;
+ }
+
+ return 0;
+}
+
+static void ibex_uart_receive(void *opaque, const uint8_t *buf, int size)
+{
+ IbexUartState *s = opaque;
+ uint8_t rx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_RXILVL)
+ >> FIFO_CTRL_RXILVL_SHIFT;
+
+ s->uart_rdata = *buf;
+
+ s->uart_status &= ~UART_STATUS_RXIDLE;
+ s->uart_status &= ~UART_STATUS_RXEMPTY;
+
+ if (size > rx_fifo_level) {
+ s->uart_intr_state |= INTR_STATE_RX_WATERMARK;
+ }
+
+ ibex_uart_update_irqs(s);
+}
+
+static gboolean ibex_uart_xmit(GIOChannel *chan, GIOCondition cond,
+ void *opaque)
+{
+ IbexUartState *s = opaque;
+ uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
+ >> FIFO_CTRL_TXILVL_SHIFT;
+ int ret;
+
+ /* instant drain the fifo when there's no back-end */
+ if (!qemu_chr_fe_backend_connected(&s->chr)) {
+ s->tx_level = 0;
+ return FALSE;
+ }
+
+ if (!s->tx_level) {
+ s->uart_status &= UART_STATUS_TXFULL;
+ s->uart_status |= UART_STATUS_TXEMPTY;
+ s->uart_intr_state |= INTR_STATE_TX_EMPTY;
+ s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
+ ibex_uart_update_irqs(s);
+ return FALSE;
+ }
+
+ ret = qemu_chr_fe_write(&s->chr, s->tx_fifo, s->tx_level);
+
+ if (ret >= 0) {
+ s->tx_level -= ret;
+ memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_level);
+ }
+
+ if (s->tx_level) {
+ guint r = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
+ ibex_uart_xmit, s);
+ if (!r) {
+ s->tx_level = 0;
+ return FALSE;
+ }
+ }
+
+ /* Clear the TX Full bit */
+ if (s->tx_level != IBEX_UART_TX_FIFO_SIZE) {
+ s->uart_status &= ~UART_STATUS_TXFULL;
+ }
+
+ /* Disable the TX_WATERMARK IRQ */
+ if (s->tx_level < tx_fifo_level) {
+ s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
+ }
+
+ /* Set TX empty */
+ if (s->tx_level == 0) {
+ s->uart_status |= UART_STATUS_TXEMPTY;
+ s->uart_intr_state |= INTR_STATE_TX_EMPTY;
+ }
+
+ ibex_uart_update_irqs(s);
+ return FALSE;
+}
+
+static void uart_write_tx_fifo(IbexUartState *s, const uint8_t *buf,
+ int size)
+{
+ uint64_t current_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
+ >> FIFO_CTRL_TXILVL_SHIFT;
+
+ if (size > IBEX_UART_TX_FIFO_SIZE - s->tx_level) {
+ size = IBEX_UART_TX_FIFO_SIZE - s->tx_level;
+ qemu_log_mask(LOG_GUEST_ERROR, "ibex_uart: TX FIFO overflow");
+ }
+
+ memcpy(s->tx_fifo + s->tx_level, buf, size);
+ s->tx_level += size;
+
+ if (s->tx_level > 0) {
+ s->uart_status &= ~UART_STATUS_TXEMPTY;
+ }
+
+ if (s->tx_level >= tx_fifo_level) {
+ s->uart_intr_state |= INTR_STATE_TX_WATERMARK;
+ ibex_uart_update_irqs(s);
+ }
+
+ if (s->tx_level == IBEX_UART_TX_FIFO_SIZE) {
+ s->uart_status |= UART_STATUS_TXFULL;
+ }
+
+ timer_mod(s->fifo_trigger_handle, current_time +
+ (s->char_tx_time * 4));
+}
+
+static void ibex_uart_reset(DeviceState *dev)
+{
+ IbexUartState *s = IBEX_UART(dev);
+
+ s->uart_intr_state = 0x00000000;
+ s->uart_intr_state = 0x00000000;
+ s->uart_intr_enable = 0x00000000;
+ s->uart_ctrl = 0x00000000;
+ s->uart_status = 0x0000003c;
+ s->uart_rdata = 0x00000000;
+ s->uart_fifo_ctrl = 0x00000000;
+ s->uart_fifo_status = 0x00000000;
+ s->uart_ovrd = 0x00000000;
+ s->uart_val = 0x00000000;
+ s->uart_timeout_ctrl = 0x00000000;
+
+ s->tx_level = 0;
+
+ s->char_tx_time = (NANOSECONDS_PER_SECOND / 230400) * 10;
+
+ ibex_uart_update_irqs(s);
+}
+
+static uint64_t ibex_uart_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ IbexUartState *s = opaque;
+ uint64_t retvalue = 0;
+
+ switch (addr) {
+ case IBEX_UART_INTR_STATE:
+ retvalue = s->uart_intr_state;
+ break;
+ case IBEX_UART_INTR_ENABLE:
+ retvalue = s->uart_intr_enable;
+ break;
+ case IBEX_UART_INTR_TEST:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: wdata is write only\n", __func__);
+ break;
+
+ case IBEX_UART_CTRL:
+ retvalue = s->uart_ctrl;
+ break;
+ case IBEX_UART_STATUS:
+ retvalue = s->uart_status;
+ break;
+
+ case IBEX_UART_RDATA:
+ retvalue = s->uart_rdata;
+ if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
+ qemu_chr_fe_accept_input(&s->chr);
+
+ s->uart_status |= UART_STATUS_RXIDLE;
+ s->uart_status |= UART_STATUS_RXEMPTY;
+ }
+ break;
+ case IBEX_UART_WDATA:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: wdata is write only\n", __func__);
+ break;
+
+ case IBEX_UART_FIFO_CTRL:
+ retvalue = s->uart_fifo_ctrl;
+ break;
+ case IBEX_UART_FIFO_STATUS:
+ retvalue = s->uart_fifo_status;
+
+ retvalue |= s->tx_level & 0x1F;
+
+ qemu_log_mask(LOG_UNIMP,
+ "%s: RX fifos are not supported\n", __func__);
+ break;
+
+ case IBEX_UART_OVRD:
+ retvalue = s->uart_ovrd;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: ovrd is not supported\n", __func__);
+ break;
+ case IBEX_UART_VAL:
+ retvalue = s->uart_val;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: val is not supported\n", __func__);
+ break;
+ case IBEX_UART_TIMEOUT_CTRL:
+ retvalue = s->uart_timeout_ctrl;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: timeout_ctrl is not supported\n", __func__);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ return 0;
+ }
+
+ return retvalue;
+}
+
+static void ibex_uart_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ IbexUartState *s = opaque;
+ uint32_t value = val64;
+
+ switch (addr) {
+ case IBEX_UART_INTR_STATE:
+ /* Write 1 clear */
+ s->uart_intr_state &= ~value;
+ ibex_uart_update_irqs(s);
+ break;
+ case IBEX_UART_INTR_ENABLE:
+ s->uart_intr_enable = value;
+ ibex_uart_update_irqs(s);
+ break;
+ case IBEX_UART_INTR_TEST:
+ s->uart_intr_state |= value;
+ ibex_uart_update_irqs(s);
+ break;
+
+ case IBEX_UART_CTRL:
+ s->uart_ctrl = value;
+
+ if (value & UART_CTRL_NF) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_NF is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_SLPBK) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_SLPBK is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_LLPBK) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_LLPBK is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_PARITY_EN) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_PARITY_EN is not supported\n",
+ __func__);
+ }
+ if (value & UART_CTRL_PARITY_ODD) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_PARITY_ODD is not supported\n",
+ __func__);
+ }
+ if (value & UART_CTRL_RXBLVL) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_RXBLVL is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_NCO) {
+ uint64_t baud = ((value & UART_CTRL_NCO) >> 16);
+ baud *= 1000;
+ baud /= 2 ^ 20;
+
+ s->char_tx_time = (NANOSECONDS_PER_SECOND / baud) * 10;
+ }
+ break;
+ case IBEX_UART_STATUS:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: status is read only\n", __func__);
+ break;
+
+ case IBEX_UART_RDATA:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: rdata is read only\n", __func__);
+ break;
+ case IBEX_UART_WDATA:
+ uart_write_tx_fifo(s, (uint8_t *) &value, 1);
+ break;
+
+ case IBEX_UART_FIFO_CTRL:
+ s->uart_fifo_ctrl = value;
+
+ if (value & FIFO_CTRL_RXRST) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: RX fifos are not supported\n", __func__);
+ }
+ if (value & FIFO_CTRL_TXRST) {
+ s->tx_level = 0;
+ }
+ break;
+ case IBEX_UART_FIFO_STATUS:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: fifo_status is read only\n", __func__);
+ break;
+
+ case IBEX_UART_OVRD:
+ s->uart_ovrd = value;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: ovrd is not supported\n", __func__);
+ break;
+ case IBEX_UART_VAL:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: val is read only\n", __func__);
+ break;
+ case IBEX_UART_TIMEOUT_CTRL:
+ s->uart_timeout_ctrl = value;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: timeout_ctrl is not supported\n", __func__);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ }
+}
+
+static void fifo_trigger_update(void *opaque)
+{
+ IbexUartState *s = opaque;
+
+ if (s->uart_ctrl & UART_CTRL_TX_ENABLE) {
+ ibex_uart_xmit(NULL, G_IO_OUT, s);
+ }
+}
+
+static const MemoryRegionOps ibex_uart_ops = {
+ .read = ibex_uart_read,
+ .write = ibex_uart_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 4,
+};
+
+static int cadence_uart_post_load(void *opaque, int version_id)
+{
+ IbexUartState *s = opaque;
+
+ ibex_uart_update_irqs(s);
+ return 0;
+}
+
+static const VMStateDescription vmstate_ibex_uart = {
+ .name = TYPE_IBEX_UART,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .post_load = cadence_uart_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8_ARRAY(tx_fifo, IbexUartState,
+ IBEX_UART_TX_FIFO_SIZE),
+ VMSTATE_UINT32(tx_level, IbexUartState),
+ VMSTATE_UINT64(char_tx_time, IbexUartState),
+ VMSTATE_TIMER_PTR(fifo_trigger_handle, IbexUartState),
+ VMSTATE_UINT32(uart_intr_state, IbexUartState),
+ VMSTATE_UINT32(uart_intr_enable, IbexUartState),
+ VMSTATE_UINT32(uart_ctrl, IbexUartState),
+ VMSTATE_UINT32(uart_status, IbexUartState),
+ VMSTATE_UINT32(uart_rdata, IbexUartState),
+ VMSTATE_UINT32(uart_fifo_ctrl, IbexUartState),
+ VMSTATE_UINT32(uart_fifo_status, IbexUartState),
+ VMSTATE_UINT32(uart_ovrd, IbexUartState),
+ VMSTATE_UINT32(uart_val, IbexUartState),
+ VMSTATE_UINT32(uart_timeout_ctrl, IbexUartState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static Property ibex_uart_properties[] = {
+ DEFINE_PROP_CHR("chardev", IbexUartState, chr),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ibex_uart_init(Object *obj)
+{
+ IbexUartState *s = IBEX_UART(obj);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->tx_watermark);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rx_watermark);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->tx_empty);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rx_overflow);
+
+ memory_region_init_io(&s->mmio, obj, &ibex_uart_ops, s,
+ TYPE_IBEX_UART, 0x400);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+}
+
+static void ibex_uart_realize(DeviceState *dev, Error **errp)
+{
+ IbexUartState *s = IBEX_UART(dev);
+
+ s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+ fifo_trigger_update, s);
+
+ qemu_chr_fe_set_handlers(&s->chr, ibex_uart_can_receive,
+ ibex_uart_receive, NULL, NULL,
+ s, NULL, true);
+}
+
+static void ibex_uart_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = ibex_uart_reset;
+ dc->realize = ibex_uart_realize;
+ dc->vmsd = &vmstate_ibex_uart;
+ device_class_set_props(dc, ibex_uart_properties);
+}
+
+static const TypeInfo ibex_uart_info = {
+ .name = TYPE_IBEX_UART,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IbexUartState),
+ .instance_init = ibex_uart_init,
+ .class_init = ibex_uart_class_init,
+};
+
+static void ibex_uart_register_types(void)
+{
+ type_register_static(&ibex_uart_info);
+}
+
+type_init(ibex_uart_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 668e664fa5..5440137427 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1243,7 +1243,9 @@ M: Alistair Francis <Alistair.Francis@wdc.com>
L: qemu-riscv@nongnu.org
S: Supported
F: hw/riscv/opentitan.c
+F: hw/char/ibex_uart.c
F: include/hw/riscv/opentitan.h
+F: include/hw/char/ibex_uart.h
SH4 Machines
------------
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index 9e9a6c1aff..633996be5b 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -12,6 +12,7 @@ common-obj-$(CONFIG_VIRTIO_SERIAL) += virtio-console.o
common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
common-obj-$(CONFIG_XEN) += xen_console.o
common-obj-$(CONFIG_CADENCE) += cadence_uart.o
+common-obj-$(CONFIG_IBEX) += ibex_uart.o
common-obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
common-obj-$(CONFIG_COLDFIRE) += mcf_uart.o
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 94d19571f7..28947ef3e0 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -4,6 +4,9 @@ config HTIF
config HART
bool
+config IBEX
+ bool
+
config SIFIVE
bool
select MSI_NONBROKEN
@@ -29,6 +32,7 @@ config SPIKE
config OPENTITAN
bool
+ select IBEX
select HART
select UNIMP
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 06/10] hw/char: Initial commit of Ibex UART
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
This is the initial commit of the Ibex UART device. Serial TX is
working, while RX has been implemeneted but untested.
This is based on the documentation from:
https://docs.opentitan.org/hw/ip/uart/doc/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
include/hw/char/ibex_uart.h | 110 ++++++++
hw/char/ibex_uart.c | 492 ++++++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
hw/char/Makefile.objs | 1 +
hw/riscv/Kconfig | 4 +
5 files changed, 609 insertions(+)
create mode 100644 include/hw/char/ibex_uart.h
create mode 100644 hw/char/ibex_uart.c
diff --git a/include/hw/char/ibex_uart.h b/include/hw/char/ibex_uart.h
new file mode 100644
index 0000000000..2bec772615
--- /dev/null
+++ b/include/hw/char/ibex_uart.h
@@ -0,0 +1,110 @@
+/*
+ * QEMU lowRISC Ibex UART device
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_IBEX_UART_H
+#define HW_IBEX_UART_H
+
+#include "hw/sysbus.h"
+#include "chardev/char-fe.h"
+#include "qemu/timer.h"
+
+#define IBEX_UART_INTR_STATE 0x00
+ #define INTR_STATE_TX_WATERMARK (1 << 0)
+ #define INTR_STATE_RX_WATERMARK (1 << 1)
+ #define INTR_STATE_TX_EMPTY (1 << 2)
+ #define INTR_STATE_RX_OVERFLOW (1 << 3)
+#define IBEX_UART_INTR_ENABLE 0x04
+#define IBEX_UART_INTR_TEST 0x08
+
+#define IBEX_UART_CTRL 0x0c
+ #define UART_CTRL_TX_ENABLE (1 << 0)
+ #define UART_CTRL_RX_ENABLE (1 << 1)
+ #define UART_CTRL_NF (1 << 2)
+ #define UART_CTRL_SLPBK (1 << 4)
+ #define UART_CTRL_LLPBK (1 << 5)
+ #define UART_CTRL_PARITY_EN (1 << 6)
+ #define UART_CTRL_PARITY_ODD (1 << 7)
+ #define UART_CTRL_RXBLVL (3 << 8)
+ #define UART_CTRL_NCO (0xFFFF << 16)
+
+#define IBEX_UART_STATUS 0x10
+ #define UART_STATUS_TXFULL (1 << 0)
+ #define UART_STATUS_RXFULL (1 << 1)
+ #define UART_STATUS_TXEMPTY (1 << 2)
+ #define UART_STATUS_RXIDLE (1 << 4)
+ #define UART_STATUS_RXEMPTY (1 << 5)
+
+#define IBEX_UART_RDATA 0x14
+#define IBEX_UART_WDATA 0x18
+
+#define IBEX_UART_FIFO_CTRL 0x1c
+ #define FIFO_CTRL_RXRST (1 << 0)
+ #define FIFO_CTRL_TXRST (1 << 1)
+ #define FIFO_CTRL_RXILVL (7 << 2)
+ #define FIFO_CTRL_RXILVL_SHIFT (2)
+ #define FIFO_CTRL_TXILVL (3 << 5)
+ #define FIFO_CTRL_TXILVL_SHIFT (5)
+
+#define IBEX_UART_FIFO_STATUS 0x20
+#define IBEX_UART_OVRD 0x24
+#define IBEX_UART_VAL 0x28
+#define IBEX_UART_TIMEOUT_CTRL 0x2c
+
+#define IBEX_UART_TX_FIFO_SIZE 16
+
+#define TYPE_IBEX_UART "ibex-uart"
+#define IBEX_UART(obj) \
+ OBJECT_CHECK(IbexUartState, (obj), TYPE_IBEX_UART)
+
+typedef struct {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion mmio;
+
+ uint8_t tx_fifo[IBEX_UART_TX_FIFO_SIZE];
+ uint32_t tx_level;
+
+ QEMUTimer *fifo_trigger_handle;
+ uint64_t char_tx_time;
+
+ uint32_t uart_intr_state;
+ uint32_t uart_intr_enable;
+ uint32_t uart_ctrl;
+ uint32_t uart_status;
+ uint32_t uart_rdata;
+ uint32_t uart_fifo_ctrl;
+ uint32_t uart_fifo_status;
+ uint32_t uart_ovrd;
+ uint32_t uart_val;
+ uint32_t uart_timeout_ctrl;
+
+ CharBackend chr;
+ qemu_irq tx_watermark;
+ qemu_irq rx_watermark;
+ qemu_irq tx_empty;
+ qemu_irq rx_overflow;
+} IbexUartState;
+#endif /* HW_IBEX_UART_H */
diff --git a/hw/char/ibex_uart.c b/hw/char/ibex_uart.c
new file mode 100644
index 0000000000..c416325d73
--- /dev/null
+++ b/hw/char/ibex_uart.c
@@ -0,0 +1,492 @@
+/*
+ * QEMU lowRISC Ibex UART device
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * For details check the documentation here:
+ * https://docs.opentitan.org/hw/ip/uart/doc/
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/char/ibex_uart.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "migration/vmstate.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+
+static void ibex_uart_update_irqs(IbexUartState *s)
+{
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_TX_WATERMARK) {
+ qemu_set_irq(s->tx_watermark, 1);
+ } else {
+ qemu_set_irq(s->tx_watermark, 0);
+ }
+
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_RX_WATERMARK) {
+ qemu_set_irq(s->rx_watermark, 1);
+ } else {
+ qemu_set_irq(s->rx_watermark, 0);
+ }
+
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_TX_EMPTY) {
+ qemu_set_irq(s->tx_empty, 1);
+ } else {
+ qemu_set_irq(s->tx_empty, 0);
+ }
+
+ if (s->uart_intr_state & s->uart_intr_enable & INTR_STATE_RX_OVERFLOW) {
+ qemu_set_irq(s->rx_overflow, 1);
+ } else {
+ qemu_set_irq(s->rx_overflow, 0);
+ }
+}
+
+static int ibex_uart_can_receive(void *opaque)
+{
+ IbexUartState *s = opaque;
+
+ if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
+ return 1;
+ }
+
+ return 0;
+}
+
+static void ibex_uart_receive(void *opaque, const uint8_t *buf, int size)
+{
+ IbexUartState *s = opaque;
+ uint8_t rx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_RXILVL)
+ >> FIFO_CTRL_RXILVL_SHIFT;
+
+ s->uart_rdata = *buf;
+
+ s->uart_status &= ~UART_STATUS_RXIDLE;
+ s->uart_status &= ~UART_STATUS_RXEMPTY;
+
+ if (size > rx_fifo_level) {
+ s->uart_intr_state |= INTR_STATE_RX_WATERMARK;
+ }
+
+ ibex_uart_update_irqs(s);
+}
+
+static gboolean ibex_uart_xmit(GIOChannel *chan, GIOCondition cond,
+ void *opaque)
+{
+ IbexUartState *s = opaque;
+ uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
+ >> FIFO_CTRL_TXILVL_SHIFT;
+ int ret;
+
+ /* instant drain the fifo when there's no back-end */
+ if (!qemu_chr_fe_backend_connected(&s->chr)) {
+ s->tx_level = 0;
+ return FALSE;
+ }
+
+ if (!s->tx_level) {
+ s->uart_status &= UART_STATUS_TXFULL;
+ s->uart_status |= UART_STATUS_TXEMPTY;
+ s->uart_intr_state |= INTR_STATE_TX_EMPTY;
+ s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
+ ibex_uart_update_irqs(s);
+ return FALSE;
+ }
+
+ ret = qemu_chr_fe_write(&s->chr, s->tx_fifo, s->tx_level);
+
+ if (ret >= 0) {
+ s->tx_level -= ret;
+ memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_level);
+ }
+
+ if (s->tx_level) {
+ guint r = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
+ ibex_uart_xmit, s);
+ if (!r) {
+ s->tx_level = 0;
+ return FALSE;
+ }
+ }
+
+ /* Clear the TX Full bit */
+ if (s->tx_level != IBEX_UART_TX_FIFO_SIZE) {
+ s->uart_status &= ~UART_STATUS_TXFULL;
+ }
+
+ /* Disable the TX_WATERMARK IRQ */
+ if (s->tx_level < tx_fifo_level) {
+ s->uart_intr_state &= ~INTR_STATE_TX_WATERMARK;
+ }
+
+ /* Set TX empty */
+ if (s->tx_level == 0) {
+ s->uart_status |= UART_STATUS_TXEMPTY;
+ s->uart_intr_state |= INTR_STATE_TX_EMPTY;
+ }
+
+ ibex_uart_update_irqs(s);
+ return FALSE;
+}
+
+static void uart_write_tx_fifo(IbexUartState *s, const uint8_t *buf,
+ int size)
+{
+ uint64_t current_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ uint8_t tx_fifo_level = (s->uart_fifo_ctrl & FIFO_CTRL_TXILVL)
+ >> FIFO_CTRL_TXILVL_SHIFT;
+
+ if (size > IBEX_UART_TX_FIFO_SIZE - s->tx_level) {
+ size = IBEX_UART_TX_FIFO_SIZE - s->tx_level;
+ qemu_log_mask(LOG_GUEST_ERROR, "ibex_uart: TX FIFO overflow");
+ }
+
+ memcpy(s->tx_fifo + s->tx_level, buf, size);
+ s->tx_level += size;
+
+ if (s->tx_level > 0) {
+ s->uart_status &= ~UART_STATUS_TXEMPTY;
+ }
+
+ if (s->tx_level >= tx_fifo_level) {
+ s->uart_intr_state |= INTR_STATE_TX_WATERMARK;
+ ibex_uart_update_irqs(s);
+ }
+
+ if (s->tx_level == IBEX_UART_TX_FIFO_SIZE) {
+ s->uart_status |= UART_STATUS_TXFULL;
+ }
+
+ timer_mod(s->fifo_trigger_handle, current_time +
+ (s->char_tx_time * 4));
+}
+
+static void ibex_uart_reset(DeviceState *dev)
+{
+ IbexUartState *s = IBEX_UART(dev);
+
+ s->uart_intr_state = 0x00000000;
+ s->uart_intr_state = 0x00000000;
+ s->uart_intr_enable = 0x00000000;
+ s->uart_ctrl = 0x00000000;
+ s->uart_status = 0x0000003c;
+ s->uart_rdata = 0x00000000;
+ s->uart_fifo_ctrl = 0x00000000;
+ s->uart_fifo_status = 0x00000000;
+ s->uart_ovrd = 0x00000000;
+ s->uart_val = 0x00000000;
+ s->uart_timeout_ctrl = 0x00000000;
+
+ s->tx_level = 0;
+
+ s->char_tx_time = (NANOSECONDS_PER_SECOND / 230400) * 10;
+
+ ibex_uart_update_irqs(s);
+}
+
+static uint64_t ibex_uart_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ IbexUartState *s = opaque;
+ uint64_t retvalue = 0;
+
+ switch (addr) {
+ case IBEX_UART_INTR_STATE:
+ retvalue = s->uart_intr_state;
+ break;
+ case IBEX_UART_INTR_ENABLE:
+ retvalue = s->uart_intr_enable;
+ break;
+ case IBEX_UART_INTR_TEST:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: wdata is write only\n", __func__);
+ break;
+
+ case IBEX_UART_CTRL:
+ retvalue = s->uart_ctrl;
+ break;
+ case IBEX_UART_STATUS:
+ retvalue = s->uart_status;
+ break;
+
+ case IBEX_UART_RDATA:
+ retvalue = s->uart_rdata;
+ if (s->uart_ctrl & UART_CTRL_RX_ENABLE) {
+ qemu_chr_fe_accept_input(&s->chr);
+
+ s->uart_status |= UART_STATUS_RXIDLE;
+ s->uart_status |= UART_STATUS_RXEMPTY;
+ }
+ break;
+ case IBEX_UART_WDATA:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: wdata is write only\n", __func__);
+ break;
+
+ case IBEX_UART_FIFO_CTRL:
+ retvalue = s->uart_fifo_ctrl;
+ break;
+ case IBEX_UART_FIFO_STATUS:
+ retvalue = s->uart_fifo_status;
+
+ retvalue |= s->tx_level & 0x1F;
+
+ qemu_log_mask(LOG_UNIMP,
+ "%s: RX fifos are not supported\n", __func__);
+ break;
+
+ case IBEX_UART_OVRD:
+ retvalue = s->uart_ovrd;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: ovrd is not supported\n", __func__);
+ break;
+ case IBEX_UART_VAL:
+ retvalue = s->uart_val;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: val is not supported\n", __func__);
+ break;
+ case IBEX_UART_TIMEOUT_CTRL:
+ retvalue = s->uart_timeout_ctrl;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: timeout_ctrl is not supported\n", __func__);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ return 0;
+ }
+
+ return retvalue;
+}
+
+static void ibex_uart_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ IbexUartState *s = opaque;
+ uint32_t value = val64;
+
+ switch (addr) {
+ case IBEX_UART_INTR_STATE:
+ /* Write 1 clear */
+ s->uart_intr_state &= ~value;
+ ibex_uart_update_irqs(s);
+ break;
+ case IBEX_UART_INTR_ENABLE:
+ s->uart_intr_enable = value;
+ ibex_uart_update_irqs(s);
+ break;
+ case IBEX_UART_INTR_TEST:
+ s->uart_intr_state |= value;
+ ibex_uart_update_irqs(s);
+ break;
+
+ case IBEX_UART_CTRL:
+ s->uart_ctrl = value;
+
+ if (value & UART_CTRL_NF) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_NF is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_SLPBK) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_SLPBK is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_LLPBK) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_LLPBK is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_PARITY_EN) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_PARITY_EN is not supported\n",
+ __func__);
+ }
+ if (value & UART_CTRL_PARITY_ODD) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_PARITY_ODD is not supported\n",
+ __func__);
+ }
+ if (value & UART_CTRL_RXBLVL) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: UART_CTRL_RXBLVL is not supported\n", __func__);
+ }
+ if (value & UART_CTRL_NCO) {
+ uint64_t baud = ((value & UART_CTRL_NCO) >> 16);
+ baud *= 1000;
+ baud /= 2 ^ 20;
+
+ s->char_tx_time = (NANOSECONDS_PER_SECOND / baud) * 10;
+ }
+ break;
+ case IBEX_UART_STATUS:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: status is read only\n", __func__);
+ break;
+
+ case IBEX_UART_RDATA:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: rdata is read only\n", __func__);
+ break;
+ case IBEX_UART_WDATA:
+ uart_write_tx_fifo(s, (uint8_t *) &value, 1);
+ break;
+
+ case IBEX_UART_FIFO_CTRL:
+ s->uart_fifo_ctrl = value;
+
+ if (value & FIFO_CTRL_RXRST) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: RX fifos are not supported\n", __func__);
+ }
+ if (value & FIFO_CTRL_TXRST) {
+ s->tx_level = 0;
+ }
+ break;
+ case IBEX_UART_FIFO_STATUS:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: fifo_status is read only\n", __func__);
+ break;
+
+ case IBEX_UART_OVRD:
+ s->uart_ovrd = value;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: ovrd is not supported\n", __func__);
+ break;
+ case IBEX_UART_VAL:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: val is read only\n", __func__);
+ break;
+ case IBEX_UART_TIMEOUT_CTRL:
+ s->uart_timeout_ctrl = value;
+ qemu_log_mask(LOG_UNIMP,
+ "%s: timeout_ctrl is not supported\n", __func__);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ }
+}
+
+static void fifo_trigger_update(void *opaque)
+{
+ IbexUartState *s = opaque;
+
+ if (s->uart_ctrl & UART_CTRL_TX_ENABLE) {
+ ibex_uart_xmit(NULL, G_IO_OUT, s);
+ }
+}
+
+static const MemoryRegionOps ibex_uart_ops = {
+ .read = ibex_uart_read,
+ .write = ibex_uart_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 4,
+};
+
+static int cadence_uart_post_load(void *opaque, int version_id)
+{
+ IbexUartState *s = opaque;
+
+ ibex_uart_update_irqs(s);
+ return 0;
+}
+
+static const VMStateDescription vmstate_ibex_uart = {
+ .name = TYPE_IBEX_UART,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .post_load = cadence_uart_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8_ARRAY(tx_fifo, IbexUartState,
+ IBEX_UART_TX_FIFO_SIZE),
+ VMSTATE_UINT32(tx_level, IbexUartState),
+ VMSTATE_UINT64(char_tx_time, IbexUartState),
+ VMSTATE_TIMER_PTR(fifo_trigger_handle, IbexUartState),
+ VMSTATE_UINT32(uart_intr_state, IbexUartState),
+ VMSTATE_UINT32(uart_intr_enable, IbexUartState),
+ VMSTATE_UINT32(uart_ctrl, IbexUartState),
+ VMSTATE_UINT32(uart_status, IbexUartState),
+ VMSTATE_UINT32(uart_rdata, IbexUartState),
+ VMSTATE_UINT32(uart_fifo_ctrl, IbexUartState),
+ VMSTATE_UINT32(uart_fifo_status, IbexUartState),
+ VMSTATE_UINT32(uart_ovrd, IbexUartState),
+ VMSTATE_UINT32(uart_val, IbexUartState),
+ VMSTATE_UINT32(uart_timeout_ctrl, IbexUartState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static Property ibex_uart_properties[] = {
+ DEFINE_PROP_CHR("chardev", IbexUartState, chr),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ibex_uart_init(Object *obj)
+{
+ IbexUartState *s = IBEX_UART(obj);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->tx_watermark);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rx_watermark);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->tx_empty);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rx_overflow);
+
+ memory_region_init_io(&s->mmio, obj, &ibex_uart_ops, s,
+ TYPE_IBEX_UART, 0x400);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+}
+
+static void ibex_uart_realize(DeviceState *dev, Error **errp)
+{
+ IbexUartState *s = IBEX_UART(dev);
+
+ s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+ fifo_trigger_update, s);
+
+ qemu_chr_fe_set_handlers(&s->chr, ibex_uart_can_receive,
+ ibex_uart_receive, NULL, NULL,
+ s, NULL, true);
+}
+
+static void ibex_uart_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = ibex_uart_reset;
+ dc->realize = ibex_uart_realize;
+ dc->vmsd = &vmstate_ibex_uart;
+ device_class_set_props(dc, ibex_uart_properties);
+}
+
+static const TypeInfo ibex_uart_info = {
+ .name = TYPE_IBEX_UART,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IbexUartState),
+ .instance_init = ibex_uart_init,
+ .class_init = ibex_uart_class_init,
+};
+
+static void ibex_uart_register_types(void)
+{
+ type_register_static(&ibex_uart_info);
+}
+
+type_init(ibex_uart_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 668e664fa5..5440137427 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1243,7 +1243,9 @@ M: Alistair Francis <Alistair.Francis@wdc.com>
L: qemu-riscv@nongnu.org
S: Supported
F: hw/riscv/opentitan.c
+F: hw/char/ibex_uart.c
F: include/hw/riscv/opentitan.h
+F: include/hw/char/ibex_uart.h
SH4 Machines
------------
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index 9e9a6c1aff..633996be5b 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -12,6 +12,7 @@ common-obj-$(CONFIG_VIRTIO_SERIAL) += virtio-console.o
common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
common-obj-$(CONFIG_XEN) += xen_console.o
common-obj-$(CONFIG_CADENCE) += cadence_uart.o
+common-obj-$(CONFIG_IBEX) += ibex_uart.o
common-obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
common-obj-$(CONFIG_COLDFIRE) += mcf_uart.o
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 94d19571f7..28947ef3e0 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -4,6 +4,9 @@ config HTIF
config HART
bool
+config IBEX
+ bool
+
config SIFIVE
bool
select MSI_NONBROKEN
@@ -29,6 +32,7 @@ config SPIKE
config OPENTITAN
bool
+ select IBEX
select HART
select UNIMP
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 07/10] hw/intc: Initial commit of lowRISC Ibex PLIC
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
The Ibex core contains a PLIC that although similar to the RISC-V spec
is not RISC-V spec compliant.
This patch implements a Ibex PLIC in a somewhat generic way.
As the current RISC-V PLIC needs tidying up, my hope is that as the Ibex
PLIC move towards spec compliance this PLIC implementation can be
updated until it can replace the current PLIC.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
include/hw/intc/ibex_plic.h | 63 +++++++++
hw/intc/ibex_plic.c | 261 ++++++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
hw/intc/Makefile.objs | 1 +
4 files changed, 327 insertions(+)
create mode 100644 include/hw/intc/ibex_plic.h
create mode 100644 hw/intc/ibex_plic.c
diff --git a/include/hw/intc/ibex_plic.h b/include/hw/intc/ibex_plic.h
new file mode 100644
index 0000000000..ddc7909903
--- /dev/null
+++ b/include/hw/intc/ibex_plic.h
@@ -0,0 +1,63 @@
+/*
+ * QEMU RISC-V lowRISC Ibex PLIC
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_IBEX_PLIC_H
+#define HW_IBEX_PLIC_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_IBEX_PLIC "ibex-plic"
+#define IBEX_PLIC(obj) \
+ OBJECT_CHECK(IbexPlicState, (obj), TYPE_IBEX_PLIC)
+
+typedef struct IbexPlicState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ MemoryRegion mmio;
+
+ uint32_t *pending;
+ uint32_t *source;
+ uint32_t *priority;
+ uint32_t *enable;
+ uint32_t threshold;
+ uint32_t claim;
+
+ /* config */
+ uint32_t num_cpus;
+ uint32_t num_sources;
+
+ uint32_t pending_base;
+ uint32_t pending_num;
+
+ uint32_t source_base;
+ uint32_t source_num;
+
+ uint32_t priority_base;
+ uint32_t priority_num;
+
+ uint32_t enable_base;
+ uint32_t enable_num;
+
+ uint32_t threshold_base;
+
+ uint32_t claim_base;
+} IbexPlicState;
+
+#endif /* HW_IBEX_PLIC_H */
diff --git a/hw/intc/ibex_plic.c b/hw/intc/ibex_plic.c
new file mode 100644
index 0000000000..41079518c6
--- /dev/null
+++ b/hw/intc/ibex_plic.c
@@ -0,0 +1,261 @@
+/*
+ * QEMU RISC-V lowRISC Ibex PLIC
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Documentation avaliable: https://docs.opentitan.org/hw/ip/rv_plic/doc/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/core/cpu.h"
+#include "hw/boards.h"
+#include "hw/pci/msi.h"
+#include "target/riscv/cpu_bits.h"
+#include "target/riscv/cpu.h"
+#include "hw/intc/ibex_plic.h"
+
+static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
+{
+ uint32_t end = base + (num * 0x04);
+
+ if (addr >= base && addr < end) {
+ return true;
+ }
+
+ return false;
+}
+
+static void ibex_plic_irqs_set_pending(IbexPlicState *s, int irq, bool level)
+{
+ int pending_num = irq / 32;
+
+ s->pending[pending_num] |= level << (irq % 32);
+}
+
+static bool ibex_plic_irqs_pending(IbexPlicState *s, uint32_t context)
+{
+ int i;
+
+ for (i = 0; i < s->pending_num; i++) {
+ uint32_t irq_num = ctz64(s->pending[i]) + (i * 32);
+
+ if (!(s->pending[i] & s->enable[i])) {
+ /* No pending and enabled IRQ */
+ continue;
+ }
+
+ if (s->priority[irq_num] > s->threshold) {
+ if (!s->claim) {
+ s->claim = irq_num;
+ }
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static void ibex_plic_update(IbexPlicState *s)
+{
+ CPUState *cpu;
+ int level, i;
+
+ for (i = 0; i < s->num_cpus; i++) {
+ cpu = qemu_get_cpu(i);
+
+ if (!cpu) {
+ continue;
+ }
+
+ level = ibex_plic_irqs_pending(s, 0);
+
+ riscv_cpu_update_mip(RISCV_CPU(cpu), MIP_MEIP, BOOL_TO_MASK(level));
+ }
+}
+
+static void ibex_plic_reset(DeviceState *dev)
+{
+ IbexPlicState *s = IBEX_PLIC(dev);
+
+ s->threshold = 0x00000000;
+ s->claim = 0x00000000;
+}
+
+static uint64_t ibex_plic_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ IbexPlicState *s = opaque;
+ int offset;
+ uint32_t ret = 0;
+
+ if (addr_between(addr, s->pending_base, s->pending_num)) {
+ offset = (addr - s->pending_base) / 4;
+ ret = s->pending[offset];
+ } else if (addr_between(addr, s->source_base, s->source_num)) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: Interrupt source mode not supported\n", __func__);
+ } else if (addr_between(addr, s->priority_base, s->priority_num)) {
+ offset = (addr - s->priority_base) / 4;
+ ret = s->priority[offset];
+ } else if (addr_between(addr, s->enable_base, s->enable_num)) {
+ offset = (addr - s->enable_base) / 4;
+ ret = s->enable[offset];
+ } else if (addr_between(addr, s->threshold_base, 1)) {
+ ret = s->threshold;
+ } else if (addr_between(addr, s->claim_base, 1)) {
+ int pending_num = s->claim / 32;
+ s->pending[pending_num] &= ~(1 << (s->claim % 32));
+
+ ret = s->claim;
+ }
+
+ return ret;
+}
+
+static void ibex_plic_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned int size)
+{
+ IbexPlicState *s = opaque;
+
+ if (addr_between(addr, s->pending_base, s->pending_num)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Pending registers are read only\n", __func__);
+ } else if (addr_between(addr, s->source_base, s->source_num)) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: Interrupt source mode not supported\n", __func__);
+ } else if (addr_between(addr, s->priority_base, s->priority_num)) {
+ uint32_t irq = ((addr - s->priority_base) >> 2) + 1;
+ s->priority[irq] = value & 7;
+ } else if (addr_between(addr, s->enable_base, s->enable_num)) {
+ uint32_t enable_reg = (addr - s->enable_base) / 4;
+
+ s->enable[enable_reg] = value;
+ } else if (addr_between(addr, s->threshold_base, 1)) {
+ s->threshold = value & 3;
+ } else if (addr_between(addr, s->claim_base, 1)) {
+ if (s->claim == value) {
+ /* Interrupt was completed */
+ s->claim = 0;
+ }
+ }
+
+ ibex_plic_update(s);
+}
+
+static const MemoryRegionOps ibex_plic_ops = {
+ .read = ibex_plic_read,
+ .write = ibex_plic_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4
+ }
+};
+
+static void ibex_plic_irq_request(void *opaque, int irq, int level)
+{
+ IbexPlicState *s = opaque;
+
+ ibex_plic_irqs_set_pending(s, irq, level > 0);
+ ibex_plic_update(s);
+}
+
+static Property ibex_plic_properties[] = {
+ DEFINE_PROP_UINT32("num-cpus", IbexPlicState, num_cpus, 1),
+ DEFINE_PROP_UINT32("num-sources", IbexPlicState, num_sources, 80),
+
+ DEFINE_PROP_UINT32("pending-base", IbexPlicState, pending_base, 0),
+ DEFINE_PROP_UINT32("pending-num", IbexPlicState, pending_num, 3),
+
+ DEFINE_PROP_UINT32("source-base", IbexPlicState, source_base, 0x0c),
+ DEFINE_PROP_UINT32("source-num", IbexPlicState, source_num, 3),
+
+ DEFINE_PROP_UINT32("priority-base", IbexPlicState, priority_base, 0x18),
+ DEFINE_PROP_UINT32("priority-num", IbexPlicState, priority_num, 80),
+
+ DEFINE_PROP_UINT32("enable-base", IbexPlicState, enable_base, 0x200),
+ DEFINE_PROP_UINT32("enable-num", IbexPlicState, enable_num, 3),
+
+ DEFINE_PROP_UINT32("threshold-base", IbexPlicState, threshold_base, 0x20c),
+
+ DEFINE_PROP_UINT32("claim-base", IbexPlicState, claim_base, 0x210),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ibex_plic_init(Object *obj)
+{
+ IbexPlicState *s = IBEX_PLIC(obj);
+
+ memory_region_init_io(&s->mmio, obj, &ibex_plic_ops, s,
+ TYPE_IBEX_PLIC, 0x400);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+}
+
+static void ibex_plic_realize(DeviceState *dev, Error **errp)
+{
+ IbexPlicState *s = IBEX_PLIC(dev);
+ int i;
+
+ s->pending = g_new0(uint32_t, s->pending_num);
+ s->source = g_new0(uint32_t, s->source_num);
+ s->priority = g_new0(uint32_t, s->priority_num);
+ s->enable = g_new0(uint32_t, s->enable_num);
+
+ qdev_init_gpio_in(dev, ibex_plic_irq_request, s->num_sources);
+
+ /*
+ * We can't allow the supervisor to control SEIP as this would allow the
+ * supervisor to clear a pending external interrupt which will result in
+ * a lost interrupt in the case a PLIC is attached. The SEIP bit must be
+ * hardware controlled when a PLIC is attached.
+ */
+ MachineState *ms = MACHINE(qdev_get_machine());
+ unsigned int smp_cpus = ms->smp.cpus;
+ for (i = 0; i < smp_cpus; i++) {
+ RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(i));
+ if (riscv_cpu_claim_interrupts(cpu, MIP_SEIP) < 0) {
+ error_report("SEIP already claimed");
+ exit(1);
+ }
+ }
+
+ msi_nonbroken = true;
+}
+
+static void ibex_plic_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = ibex_plic_reset;
+ device_class_set_props(dc, ibex_plic_properties);
+ dc->realize = ibex_plic_realize;
+}
+
+static const TypeInfo ibex_plic_info = {
+ .name = TYPE_IBEX_PLIC,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IbexPlicState),
+ .instance_init = ibex_plic_init,
+ .class_init = ibex_plic_class_init,
+};
+
+static void ibex_plic_register_types(void)
+{
+ type_register_static(&ibex_plic_info);
+}
+
+type_init(ibex_plic_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 5440137427..a6da784027 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1244,8 +1244,10 @@ L: qemu-riscv@nongnu.org
S: Supported
F: hw/riscv/opentitan.c
F: hw/char/ibex_uart.c
+F: hw/intc/ibex_plic.c
F: include/hw/riscv/opentitan.h
F: include/hw/char/ibex_uart.h
+F: include/hw/intc/ibex_plic.h
SH4 Machines
------------
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index f726d87532..a61e6728fe 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -49,3 +49,4 @@ obj-$(CONFIG_ARM_GIC) += arm_gicv3_cpuif.o
obj-$(CONFIG_MIPS_CPS) += mips_gic.o
obj-$(CONFIG_NIOS2) += nios2_iic.o
obj-$(CONFIG_OMPIC) += ompic.o
+obj-$(CONFIG_IBEX) += ibex_plic.o
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 07/10] hw/intc: Initial commit of lowRISC Ibex PLIC
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
The Ibex core contains a PLIC that although similar to the RISC-V spec
is not RISC-V spec compliant.
This patch implements a Ibex PLIC in a somewhat generic way.
As the current RISC-V PLIC needs tidying up, my hope is that as the Ibex
PLIC move towards spec compliance this PLIC implementation can be
updated until it can replace the current PLIC.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
include/hw/intc/ibex_plic.h | 63 +++++++++
hw/intc/ibex_plic.c | 261 ++++++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
hw/intc/Makefile.objs | 1 +
4 files changed, 327 insertions(+)
create mode 100644 include/hw/intc/ibex_plic.h
create mode 100644 hw/intc/ibex_plic.c
diff --git a/include/hw/intc/ibex_plic.h b/include/hw/intc/ibex_plic.h
new file mode 100644
index 0000000000..ddc7909903
--- /dev/null
+++ b/include/hw/intc/ibex_plic.h
@@ -0,0 +1,63 @@
+/*
+ * QEMU RISC-V lowRISC Ibex PLIC
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_IBEX_PLIC_H
+#define HW_IBEX_PLIC_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_IBEX_PLIC "ibex-plic"
+#define IBEX_PLIC(obj) \
+ OBJECT_CHECK(IbexPlicState, (obj), TYPE_IBEX_PLIC)
+
+typedef struct IbexPlicState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ MemoryRegion mmio;
+
+ uint32_t *pending;
+ uint32_t *source;
+ uint32_t *priority;
+ uint32_t *enable;
+ uint32_t threshold;
+ uint32_t claim;
+
+ /* config */
+ uint32_t num_cpus;
+ uint32_t num_sources;
+
+ uint32_t pending_base;
+ uint32_t pending_num;
+
+ uint32_t source_base;
+ uint32_t source_num;
+
+ uint32_t priority_base;
+ uint32_t priority_num;
+
+ uint32_t enable_base;
+ uint32_t enable_num;
+
+ uint32_t threshold_base;
+
+ uint32_t claim_base;
+} IbexPlicState;
+
+#endif /* HW_IBEX_PLIC_H */
diff --git a/hw/intc/ibex_plic.c b/hw/intc/ibex_plic.c
new file mode 100644
index 0000000000..41079518c6
--- /dev/null
+++ b/hw/intc/ibex_plic.c
@@ -0,0 +1,261 @@
+/*
+ * QEMU RISC-V lowRISC Ibex PLIC
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Documentation avaliable: https://docs.opentitan.org/hw/ip/rv_plic/doc/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/core/cpu.h"
+#include "hw/boards.h"
+#include "hw/pci/msi.h"
+#include "target/riscv/cpu_bits.h"
+#include "target/riscv/cpu.h"
+#include "hw/intc/ibex_plic.h"
+
+static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
+{
+ uint32_t end = base + (num * 0x04);
+
+ if (addr >= base && addr < end) {
+ return true;
+ }
+
+ return false;
+}
+
+static void ibex_plic_irqs_set_pending(IbexPlicState *s, int irq, bool level)
+{
+ int pending_num = irq / 32;
+
+ s->pending[pending_num] |= level << (irq % 32);
+}
+
+static bool ibex_plic_irqs_pending(IbexPlicState *s, uint32_t context)
+{
+ int i;
+
+ for (i = 0; i < s->pending_num; i++) {
+ uint32_t irq_num = ctz64(s->pending[i]) + (i * 32);
+
+ if (!(s->pending[i] & s->enable[i])) {
+ /* No pending and enabled IRQ */
+ continue;
+ }
+
+ if (s->priority[irq_num] > s->threshold) {
+ if (!s->claim) {
+ s->claim = irq_num;
+ }
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static void ibex_plic_update(IbexPlicState *s)
+{
+ CPUState *cpu;
+ int level, i;
+
+ for (i = 0; i < s->num_cpus; i++) {
+ cpu = qemu_get_cpu(i);
+
+ if (!cpu) {
+ continue;
+ }
+
+ level = ibex_plic_irqs_pending(s, 0);
+
+ riscv_cpu_update_mip(RISCV_CPU(cpu), MIP_MEIP, BOOL_TO_MASK(level));
+ }
+}
+
+static void ibex_plic_reset(DeviceState *dev)
+{
+ IbexPlicState *s = IBEX_PLIC(dev);
+
+ s->threshold = 0x00000000;
+ s->claim = 0x00000000;
+}
+
+static uint64_t ibex_plic_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ IbexPlicState *s = opaque;
+ int offset;
+ uint32_t ret = 0;
+
+ if (addr_between(addr, s->pending_base, s->pending_num)) {
+ offset = (addr - s->pending_base) / 4;
+ ret = s->pending[offset];
+ } else if (addr_between(addr, s->source_base, s->source_num)) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: Interrupt source mode not supported\n", __func__);
+ } else if (addr_between(addr, s->priority_base, s->priority_num)) {
+ offset = (addr - s->priority_base) / 4;
+ ret = s->priority[offset];
+ } else if (addr_between(addr, s->enable_base, s->enable_num)) {
+ offset = (addr - s->enable_base) / 4;
+ ret = s->enable[offset];
+ } else if (addr_between(addr, s->threshold_base, 1)) {
+ ret = s->threshold;
+ } else if (addr_between(addr, s->claim_base, 1)) {
+ int pending_num = s->claim / 32;
+ s->pending[pending_num] &= ~(1 << (s->claim % 32));
+
+ ret = s->claim;
+ }
+
+ return ret;
+}
+
+static void ibex_plic_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned int size)
+{
+ IbexPlicState *s = opaque;
+
+ if (addr_between(addr, s->pending_base, s->pending_num)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Pending registers are read only\n", __func__);
+ } else if (addr_between(addr, s->source_base, s->source_num)) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: Interrupt source mode not supported\n", __func__);
+ } else if (addr_between(addr, s->priority_base, s->priority_num)) {
+ uint32_t irq = ((addr - s->priority_base) >> 2) + 1;
+ s->priority[irq] = value & 7;
+ } else if (addr_between(addr, s->enable_base, s->enable_num)) {
+ uint32_t enable_reg = (addr - s->enable_base) / 4;
+
+ s->enable[enable_reg] = value;
+ } else if (addr_between(addr, s->threshold_base, 1)) {
+ s->threshold = value & 3;
+ } else if (addr_between(addr, s->claim_base, 1)) {
+ if (s->claim == value) {
+ /* Interrupt was completed */
+ s->claim = 0;
+ }
+ }
+
+ ibex_plic_update(s);
+}
+
+static const MemoryRegionOps ibex_plic_ops = {
+ .read = ibex_plic_read,
+ .write = ibex_plic_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4
+ }
+};
+
+static void ibex_plic_irq_request(void *opaque, int irq, int level)
+{
+ IbexPlicState *s = opaque;
+
+ ibex_plic_irqs_set_pending(s, irq, level > 0);
+ ibex_plic_update(s);
+}
+
+static Property ibex_plic_properties[] = {
+ DEFINE_PROP_UINT32("num-cpus", IbexPlicState, num_cpus, 1),
+ DEFINE_PROP_UINT32("num-sources", IbexPlicState, num_sources, 80),
+
+ DEFINE_PROP_UINT32("pending-base", IbexPlicState, pending_base, 0),
+ DEFINE_PROP_UINT32("pending-num", IbexPlicState, pending_num, 3),
+
+ DEFINE_PROP_UINT32("source-base", IbexPlicState, source_base, 0x0c),
+ DEFINE_PROP_UINT32("source-num", IbexPlicState, source_num, 3),
+
+ DEFINE_PROP_UINT32("priority-base", IbexPlicState, priority_base, 0x18),
+ DEFINE_PROP_UINT32("priority-num", IbexPlicState, priority_num, 80),
+
+ DEFINE_PROP_UINT32("enable-base", IbexPlicState, enable_base, 0x200),
+ DEFINE_PROP_UINT32("enable-num", IbexPlicState, enable_num, 3),
+
+ DEFINE_PROP_UINT32("threshold-base", IbexPlicState, threshold_base, 0x20c),
+
+ DEFINE_PROP_UINT32("claim-base", IbexPlicState, claim_base, 0x210),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ibex_plic_init(Object *obj)
+{
+ IbexPlicState *s = IBEX_PLIC(obj);
+
+ memory_region_init_io(&s->mmio, obj, &ibex_plic_ops, s,
+ TYPE_IBEX_PLIC, 0x400);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+}
+
+static void ibex_plic_realize(DeviceState *dev, Error **errp)
+{
+ IbexPlicState *s = IBEX_PLIC(dev);
+ int i;
+
+ s->pending = g_new0(uint32_t, s->pending_num);
+ s->source = g_new0(uint32_t, s->source_num);
+ s->priority = g_new0(uint32_t, s->priority_num);
+ s->enable = g_new0(uint32_t, s->enable_num);
+
+ qdev_init_gpio_in(dev, ibex_plic_irq_request, s->num_sources);
+
+ /*
+ * We can't allow the supervisor to control SEIP as this would allow the
+ * supervisor to clear a pending external interrupt which will result in
+ * a lost interrupt in the case a PLIC is attached. The SEIP bit must be
+ * hardware controlled when a PLIC is attached.
+ */
+ MachineState *ms = MACHINE(qdev_get_machine());
+ unsigned int smp_cpus = ms->smp.cpus;
+ for (i = 0; i < smp_cpus; i++) {
+ RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(i));
+ if (riscv_cpu_claim_interrupts(cpu, MIP_SEIP) < 0) {
+ error_report("SEIP already claimed");
+ exit(1);
+ }
+ }
+
+ msi_nonbroken = true;
+}
+
+static void ibex_plic_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = ibex_plic_reset;
+ device_class_set_props(dc, ibex_plic_properties);
+ dc->realize = ibex_plic_realize;
+}
+
+static const TypeInfo ibex_plic_info = {
+ .name = TYPE_IBEX_PLIC,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IbexPlicState),
+ .instance_init = ibex_plic_init,
+ .class_init = ibex_plic_class_init,
+};
+
+static void ibex_plic_register_types(void)
+{
+ type_register_static(&ibex_plic_info);
+}
+
+type_init(ibex_plic_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 5440137427..a6da784027 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1244,8 +1244,10 @@ L: qemu-riscv@nongnu.org
S: Supported
F: hw/riscv/opentitan.c
F: hw/char/ibex_uart.c
+F: hw/intc/ibex_plic.c
F: include/hw/riscv/opentitan.h
F: include/hw/char/ibex_uart.h
+F: include/hw/intc/ibex_plic.h
SH4 Machines
------------
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index f726d87532..a61e6728fe 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -49,3 +49,4 @@ obj-$(CONFIG_ARM_GIC) += arm_gicv3_cpuif.o
obj-$(CONFIG_MIPS_CPS) += mips_gic.o
obj-$(CONFIG_NIOS2) += nios2_iic.o
obj-$(CONFIG_OMPIC) += ompic.o
+obj-$(CONFIG_IBEX) += ibex_plic.o
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 08/10] riscv/opentitan: Connect the PLIC device
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/riscv/opentitan.h | 3 +++
hw/riscv/opentitan.c | 19 +++++++++++++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
index 15a3d87ed0..8d6a09b696 100644
--- a/include/hw/riscv/opentitan.h
+++ b/include/hw/riscv/opentitan.h
@@ -20,6 +20,7 @@
#define HW_OPENTITAN_H
#include "hw/riscv/riscv_hart.h"
+#include "hw/intc/ibex_plic.h"
#define TYPE_RISCV_IBEX_SOC "riscv.lowrisc.ibex.soc"
#define RISCV_IBEX_SOC(obj) \
@@ -31,6 +32,8 @@ typedef struct LowRISCIbexSoCState {
/*< public >*/
RISCVHartArrayState cpus;
+ IbexPlicState plic;
+
MemoryRegion flash_mem;
MemoryRegion rom;
} LowRISCIbexSoCState;
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index c00f0720ab..3926321d8c 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -25,6 +25,7 @@
#include "hw/misc/unimp.h"
#include "hw/riscv/boot.h"
#include "exec/address-spaces.h"
+#include "sysemu/sysemu.h"
static const struct MemmapEntry {
hwaddr base;
@@ -92,6 +93,9 @@ static void riscv_lowrisc_ibex_soc_init(Object *obj)
object_initialize_child(obj, "cpus", &s->cpus,
sizeof(s->cpus), TYPE_RISCV_HART_ARRAY,
&error_abort, NULL);
+
+ sysbus_init_child_obj(obj, "plic", &s->plic,
+ sizeof(s->plic), TYPE_IBEX_PLIC);
}
static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -100,6 +104,9 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
MachineState *ms = MACHINE(qdev_get_machine());
LowRISCIbexSoCState *s = RISCV_IBEX_SOC(dev_soc);
MemoryRegion *sys_mem = get_system_memory();
+ DeviceState *dev;
+ SysBusDevice *busdev;
+ Error *err = NULL;
object_property_set_str(OBJECT(&s->cpus), ms->cpu_type, "cpu-type",
&error_abort);
@@ -120,6 +127,16 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
memory_region_add_subregion(sys_mem, memmap[IBEX_FLASH].base,
&s->flash_mem);
+ /* PLIC */
+ dev = DEVICE(&s->plic);
+ object_property_set_bool(OBJECT(&s->plic), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(busdev, 0, memmap[IBEX_PLIC].base);
+
create_unimplemented_device("riscv.lowrisc.ibex.uart",
memmap[IBEX_UART].base, memmap[IBEX_UART].size);
create_unimplemented_device("riscv.lowrisc.ibex.gpio",
@@ -134,8 +151,6 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
memmap[IBEX_AES].base, memmap[IBEX_AES].size);
create_unimplemented_device("riscv.lowrisc.ibex.hmac",
memmap[IBEX_HMAC].base, memmap[IBEX_HMAC].size);
- create_unimplemented_device("riscv.lowrisc.ibex.plic",
- memmap[IBEX_PLIC].base, memmap[IBEX_PLIC].size);
create_unimplemented_device("riscv.lowrisc.ibex.pinmux",
memmap[IBEX_PINMUX].base, memmap[IBEX_PINMUX].size);
create_unimplemented_device("riscv.lowrisc.ibex.alert_handler",
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 08/10] riscv/opentitan: Connect the PLIC device
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/riscv/opentitan.h | 3 +++
hw/riscv/opentitan.c | 19 +++++++++++++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
index 15a3d87ed0..8d6a09b696 100644
--- a/include/hw/riscv/opentitan.h
+++ b/include/hw/riscv/opentitan.h
@@ -20,6 +20,7 @@
#define HW_OPENTITAN_H
#include "hw/riscv/riscv_hart.h"
+#include "hw/intc/ibex_plic.h"
#define TYPE_RISCV_IBEX_SOC "riscv.lowrisc.ibex.soc"
#define RISCV_IBEX_SOC(obj) \
@@ -31,6 +32,8 @@ typedef struct LowRISCIbexSoCState {
/*< public >*/
RISCVHartArrayState cpus;
+ IbexPlicState plic;
+
MemoryRegion flash_mem;
MemoryRegion rom;
} LowRISCIbexSoCState;
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index c00f0720ab..3926321d8c 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -25,6 +25,7 @@
#include "hw/misc/unimp.h"
#include "hw/riscv/boot.h"
#include "exec/address-spaces.h"
+#include "sysemu/sysemu.h"
static const struct MemmapEntry {
hwaddr base;
@@ -92,6 +93,9 @@ static void riscv_lowrisc_ibex_soc_init(Object *obj)
object_initialize_child(obj, "cpus", &s->cpus,
sizeof(s->cpus), TYPE_RISCV_HART_ARRAY,
&error_abort, NULL);
+
+ sysbus_init_child_obj(obj, "plic", &s->plic,
+ sizeof(s->plic), TYPE_IBEX_PLIC);
}
static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -100,6 +104,9 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
MachineState *ms = MACHINE(qdev_get_machine());
LowRISCIbexSoCState *s = RISCV_IBEX_SOC(dev_soc);
MemoryRegion *sys_mem = get_system_memory();
+ DeviceState *dev;
+ SysBusDevice *busdev;
+ Error *err = NULL;
object_property_set_str(OBJECT(&s->cpus), ms->cpu_type, "cpu-type",
&error_abort);
@@ -120,6 +127,16 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
memory_region_add_subregion(sys_mem, memmap[IBEX_FLASH].base,
&s->flash_mem);
+ /* PLIC */
+ dev = DEVICE(&s->plic);
+ object_property_set_bool(OBJECT(&s->plic), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(busdev, 0, memmap[IBEX_PLIC].base);
+
create_unimplemented_device("riscv.lowrisc.ibex.uart",
memmap[IBEX_UART].base, memmap[IBEX_UART].size);
create_unimplemented_device("riscv.lowrisc.ibex.gpio",
@@ -134,8 +151,6 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
memmap[IBEX_AES].base, memmap[IBEX_AES].size);
create_unimplemented_device("riscv.lowrisc.ibex.hmac",
memmap[IBEX_HMAC].base, memmap[IBEX_HMAC].size);
- create_unimplemented_device("riscv.lowrisc.ibex.plic",
- memmap[IBEX_PLIC].base, memmap[IBEX_PLIC].size);
create_unimplemented_device("riscv.lowrisc.ibex.pinmux",
memmap[IBEX_PINMUX].base, memmap[IBEX_PINMUX].size);
create_unimplemented_device("riscv.lowrisc.ibex.alert_handler",
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 09/10] riscv/opentitan: Connect the UART device
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/riscv/opentitan.h | 13 +++++++++++++
hw/riscv/opentitan.c | 24 ++++++++++++++++++++++--
2 files changed, 35 insertions(+), 2 deletions(-)
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
index 8d6a09b696..825a3610bc 100644
--- a/include/hw/riscv/opentitan.h
+++ b/include/hw/riscv/opentitan.h
@@ -21,6 +21,7 @@
#include "hw/riscv/riscv_hart.h"
#include "hw/intc/ibex_plic.h"
+#include "hw/char/ibex_uart.h"
#define TYPE_RISCV_IBEX_SOC "riscv.lowrisc.ibex.soc"
#define RISCV_IBEX_SOC(obj) \
@@ -33,6 +34,7 @@ typedef struct LowRISCIbexSoCState {
/*< public >*/
RISCVHartArrayState cpus;
IbexPlicState plic;
+ IbexUartState uart;
MemoryRegion flash_mem;
MemoryRegion rom;
@@ -63,4 +65,15 @@ enum {
IBEX_USBDEV,
};
+enum {
+ IBEX_UART_RX_PARITY_ERR_IRQ = 0x28,
+ IBEX_UART_RX_TIMEOUT_IRQ = 0x27,
+ IBEX_UART_RX_BREAK_ERR_IRQ = 0x26,
+ IBEX_UART_RX_FRAME_ERR_IRQ = 0x25,
+ IBEX_UART_RX_OVERFLOW_IRQ = 0x24,
+ IBEX_UART_TX_EMPTY_IRQ = 0x23,
+ IBEX_UART_RX_WATERMARK_IRQ = 0x22,
+ IBEX_UART_TX_WATERMARK_IRQ = 0x21
+};
+
#endif
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index 3926321d8c..a6c0b949ca 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -96,6 +96,9 @@ static void riscv_lowrisc_ibex_soc_init(Object *obj)
sysbus_init_child_obj(obj, "plic", &s->plic,
sizeof(s->plic), TYPE_IBEX_PLIC);
+
+ sysbus_init_child_obj(obj, "uart", &s->uart,
+ sizeof(s->uart), TYPE_IBEX_UART);
}
static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -137,8 +140,25 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, memmap[IBEX_PLIC].base);
- create_unimplemented_device("riscv.lowrisc.ibex.uart",
- memmap[IBEX_UART].base, memmap[IBEX_UART].size);
+ /* UART */
+ dev = DEVICE(&(s->uart));
+ qdev_prop_set_chr(dev, "chardev", serial_hd(0));
+ object_property_set_bool(OBJECT(&s->uart), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(busdev, 0, memmap[IBEX_UART].base);
+ sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_TX_WATERMARK_IRQ));
+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_RX_WATERMARK_IRQ));
+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_TX_EMPTY_IRQ));
+ sysbus_connect_irq(busdev, 3, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_RX_OVERFLOW_IRQ));
+
create_unimplemented_device("riscv.lowrisc.ibex.gpio",
memmap[IBEX_GPIO].base, memmap[IBEX_GPIO].size);
create_unimplemented_device("riscv.lowrisc.ibex.spi",
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 09/10] riscv/opentitan: Connect the UART device
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/riscv/opentitan.h | 13 +++++++++++++
hw/riscv/opentitan.c | 24 ++++++++++++++++++++++--
2 files changed, 35 insertions(+), 2 deletions(-)
diff --git a/include/hw/riscv/opentitan.h b/include/hw/riscv/opentitan.h
index 8d6a09b696..825a3610bc 100644
--- a/include/hw/riscv/opentitan.h
+++ b/include/hw/riscv/opentitan.h
@@ -21,6 +21,7 @@
#include "hw/riscv/riscv_hart.h"
#include "hw/intc/ibex_plic.h"
+#include "hw/char/ibex_uart.h"
#define TYPE_RISCV_IBEX_SOC "riscv.lowrisc.ibex.soc"
#define RISCV_IBEX_SOC(obj) \
@@ -33,6 +34,7 @@ typedef struct LowRISCIbexSoCState {
/*< public >*/
RISCVHartArrayState cpus;
IbexPlicState plic;
+ IbexUartState uart;
MemoryRegion flash_mem;
MemoryRegion rom;
@@ -63,4 +65,15 @@ enum {
IBEX_USBDEV,
};
+enum {
+ IBEX_UART_RX_PARITY_ERR_IRQ = 0x28,
+ IBEX_UART_RX_TIMEOUT_IRQ = 0x27,
+ IBEX_UART_RX_BREAK_ERR_IRQ = 0x26,
+ IBEX_UART_RX_FRAME_ERR_IRQ = 0x25,
+ IBEX_UART_RX_OVERFLOW_IRQ = 0x24,
+ IBEX_UART_TX_EMPTY_IRQ = 0x23,
+ IBEX_UART_RX_WATERMARK_IRQ = 0x22,
+ IBEX_UART_TX_WATERMARK_IRQ = 0x21
+};
+
#endif
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index 3926321d8c..a6c0b949ca 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -96,6 +96,9 @@ static void riscv_lowrisc_ibex_soc_init(Object *obj)
sysbus_init_child_obj(obj, "plic", &s->plic,
sizeof(s->plic), TYPE_IBEX_PLIC);
+
+ sysbus_init_child_obj(obj, "uart", &s->uart,
+ sizeof(s->uart), TYPE_IBEX_UART);
}
static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -137,8 +140,25 @@ static void riscv_lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, memmap[IBEX_PLIC].base);
- create_unimplemented_device("riscv.lowrisc.ibex.uart",
- memmap[IBEX_UART].base, memmap[IBEX_UART].size);
+ /* UART */
+ dev = DEVICE(&(s->uart));
+ qdev_prop_set_chr(dev, "chardev", serial_hd(0));
+ object_property_set_bool(OBJECT(&s->uart), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(busdev, 0, memmap[IBEX_UART].base);
+ sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_TX_WATERMARK_IRQ));
+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_RX_WATERMARK_IRQ));
+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_TX_EMPTY_IRQ));
+ sysbus_connect_irq(busdev, 3, qdev_get_gpio_in(DEVICE(&s->plic),
+ IBEX_UART_RX_OVERFLOW_IRQ));
+
create_unimplemented_device("riscv.lowrisc.ibex.gpio",
memmap[IBEX_GPIO].base, memmap[IBEX_GPIO].size);
create_unimplemented_device("riscv.lowrisc.ibex.spi",
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 10/10] target/riscv: Use a smaller guess size for no-MMU PMP
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-27 16:50 ` Alistair Francis
-1 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: alistair.francis, bmeng.cn, palmer, alistair23
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/pmp.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c
index 0e6b640fbd..9418660f1b 100644
--- a/target/riscv/pmp.c
+++ b/target/riscv/pmp.c
@@ -233,12 +233,16 @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr,
return true;
}
- /*
- * if size is unknown (0), assume that all bytes
- * from addr to the end of the page will be accessed.
- */
if (size == 0) {
- pmp_size = -(addr | TARGET_PAGE_MASK);
+ if (riscv_feature(env, RISCV_FEATURE_MMU)) {
+ /*
+ * If size is unknown (0), assume that all bytes
+ * from addr to the end of the page will be accessed.
+ */
+ pmp_size = -(addr | TARGET_PAGE_MASK);
+ } else {
+ pmp_size = sizeof(target_ulong);
+ }
} else {
pmp_size = size;
}
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 10/10] target/riscv: Use a smaller guess size for no-MMU PMP
@ 2020-05-27 16:50 ` Alistair Francis
0 siblings, 0 replies; 28+ messages in thread
From: Alistair Francis @ 2020-05-27 16:50 UTC (permalink / raw)
To: qemu-devel, qemu-riscv; +Cc: palmer, alistair.francis, alistair23, bmeng.cn
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/pmp.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c
index 0e6b640fbd..9418660f1b 100644
--- a/target/riscv/pmp.c
+++ b/target/riscv/pmp.c
@@ -233,12 +233,16 @@ bool pmp_hart_has_privs(CPURISCVState *env, target_ulong addr,
return true;
}
- /*
- * if size is unknown (0), assume that all bytes
- * from addr to the end of the page will be accessed.
- */
if (size == 0) {
- pmp_size = -(addr | TARGET_PAGE_MASK);
+ if (riscv_feature(env, RISCV_FEATURE_MMU)) {
+ /*
+ * If size is unknown (0), assume that all bytes
+ * from addr to the end of the page will be accessed.
+ */
+ pmp_size = -(addr | TARGET_PAGE_MASK);
+ } else {
+ pmp_size = sizeof(target_ulong);
+ }
} else {
pmp_size = size;
}
--
2.26.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v4 10/10] target/riscv: Use a smaller guess size for no-MMU PMP
2020-05-27 16:50 ` Alistair Francis
@ 2020-05-28 2:34 ` Bin Meng
-1 siblings, 0 replies; 28+ messages in thread
From: Bin Meng @ 2020-05-28 2:34 UTC (permalink / raw)
To: Alistair Francis
Cc: Palmer Dabbelt, open list:RISC-V,
qemu-devel@nongnu.org Developers, Alistair Francis
On Thu, May 28, 2020 at 12:59 AM Alistair Francis
<alistair.francis@wdc.com> wrote:
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> target/riscv/pmp.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 10/10] target/riscv: Use a smaller guess size for no-MMU PMP
@ 2020-05-28 2:34 ` Bin Meng
0 siblings, 0 replies; 28+ messages in thread
From: Bin Meng @ 2020-05-28 2:34 UTC (permalink / raw)
To: Alistair Francis
Cc: qemu-devel@nongnu.org Developers, open list:RISC-V,
Palmer Dabbelt, Alistair Francis
On Thu, May 28, 2020 at 12:59 AM Alistair Francis
<alistair.francis@wdc.com> wrote:
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> target/riscv/pmp.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
^ permalink raw reply [flat|nested] 28+ messages in thread