From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
michal.simek@xilinx.com, git@xilinx.com
Cc: Kalyani Akula <kalyani.akula@xilinx.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers
Date: Thu, 21 Jan 2021 11:26:48 +0100 [thread overview]
Message-ID: <cover.1611224800.git.michal.simek@xilinx.com> (raw)
Hi,
I am sending this series to reflect the latest drivers which have been
merged to mainline kernel. I have boot it on zcu102-rev1.0 and also
zcu104-rev1.0. That's why I have also added DT for this newer revision.
The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt.
And mio-bank patch requires update in dt-binding which has been posted here
https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com
Thanks,
Michal
Changes in v2:
- Remove reset description for IPs from this patch. IPs will be enabled
separately with DT binding update.
- Change patch subject
Michal Simek (12):
arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
arm64: dts: zynqmp: Enable reset controller driver
arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
arm64: dts: zynqmp: Add label for zynqmp_ipi
arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
arm64: dts: zynqmp: Wire arasan nand controller
arm64: dts: zynqmp: Wire zynqmp qspi controller
arm64: dts: zynqmp: Add missing lpd watchdog node
arm64: dts: zynqmp: Add missing iommu IDs
arm64: dts: zynqmp: Add description for zcu104 revC
arch/arm64/boot/dts/xilinx/Makefile | 1 +
.../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 12 +
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 84 +++++-
.../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 29 ++
.../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 282 ++++++++++++++++++
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 78 +++++
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 59 +++-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 94 +++++-
9 files changed, 637 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
--
2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
michal.simek@xilinx.com, git@xilinx.com
Cc: devicetree@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Kalyani Akula <kalyani.akula@xilinx.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers
Date: Thu, 21 Jan 2021 11:26:48 +0100 [thread overview]
Message-ID: <cover.1611224800.git.michal.simek@xilinx.com> (raw)
Hi,
I am sending this series to reflect the latest drivers which have been
merged to mainline kernel. I have boot it on zcu102-rev1.0 and also
zcu104-rev1.0. That's why I have also added DT for this newer revision.
The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt.
And mio-bank patch requires update in dt-binding which has been posted here
https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com
Thanks,
Michal
Changes in v2:
- Remove reset description for IPs from this patch. IPs will be enabled
separately with DT binding update.
- Change patch subject
Michal Simek (12):
arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
arm64: dts: zynqmp: Enable reset controller driver
arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
arm64: dts: zynqmp: Add label for zynqmp_ipi
arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
arm64: dts: zynqmp: Wire arasan nand controller
arm64: dts: zynqmp: Wire zynqmp qspi controller
arm64: dts: zynqmp: Add missing lpd watchdog node
arm64: dts: zynqmp: Add missing iommu IDs
arm64: dts: zynqmp: Add description for zcu104 revC
arch/arm64/boot/dts/xilinx/Makefile | 1 +
.../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 12 +
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 84 +++++-
.../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 29 ++
.../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 282 ++++++++++++++++++
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 78 +++++
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 59 +++-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 94 +++++-
9 files changed, 637 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
--
2.30.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-01-21 13:19 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 10:26 Michal Simek [this message]
2021-01-21 10:26 ` [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek
2021-01-21 10:26 ` [PATCH v2 01/12] arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 02/12] arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 03/12] arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 04/12] arm64: dts: zynqmp: Enable reset controller driver Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 22:38 ` Laurent Pinchart
2021-01-21 22:38 ` Laurent Pinchart
2021-01-21 10:26 ` [PATCH v2 05/12] arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 06/12] arm64: dts: zynqmp: Add label for zynqmp_ipi Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 07/12] arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 08/12] arm64: dts: zynqmp: Wire arasan nand controller Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 09/12] arm64: dts: zynqmp: Wire zynqmp qspi controller Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 10/12] arm64: dts: zynqmp: Add missing lpd watchdog node Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:26 ` [PATCH v2 11/12] arm64: dts: zynqmp: Add missing iommu IDs Michal Simek
2021-01-21 10:26 ` Michal Simek
2021-01-21 10:27 ` [PATCH v2 12/12] arm64: dts: zynqmp: Add description for zcu104 revC Michal Simek
2021-01-21 10:27 ` Michal Simek
2021-02-01 9:38 ` Michal Simek
2021-02-01 9:38 ` Michal Simek
2021-02-01 9:36 ` [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek
2021-02-01 9:36 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1611224800.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=kalyani.akula@xilinx.com \
--cc=krzk@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=monstr@monstr.eu \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.