* [PATCH v7 00/14] Move Hisilicon 6421v600 SPMI and USB drivers out of staging
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
To: Greg Kroah-Hartman, Lee Jones, Mark Brown, Vinod Koul
Cc: devel, devicetree, linux-kernel, Mayulong, Mauro Carvalho Chehab,
YueHaibing, Yu Chen, Liam Girdwood, Wei Xu,
Juan Antonio Aldea-Armenteros, Stephen Boyd, Rob Herring,
Christophe JAILLET, linux-arm-kernel, David Gow, Colin Ian King,
Kishon Vijay Abraham I, Alex Dewar, Dan Carpenter
Hi Greg/Mark/Lee/Vinod,
Another rebase , also the top of staging-testing,
This series contain the remaining patches for USB to start working,
except for a final DTS patch.
Patches 1 and 2 convert the SPMI and regulator
drivers to use regmap and simplifies the logic by using
regmap helpers.
Patches 3 to 9 address some issues pointed by Lee at the MFD driver.
I guess the best would be if Greg could apply both patches
also via the staging tree.
Patches 10 to 13 move the drivers and their corresponding
DT documentation bindings out of staging.
Patch 14 contains the DT which describes the regulator,
SPMI controller and MFD.
I'll submit the final patch with USB bindings after having
everything set (e.g. after 5.12-rc1).
Mauro Carvalho Chehab (14):
staging: hikey9xx: spmi driver: convert to regmap
staging: hikey9xx: hi6421v600-regulator: use some regmap helpers
staging: hikey9xx: hi6421-spmi-pmic: rename some vars
staging: hikey9xx: hi6421-spmi-pmic: cleanup probe code
staging: hikey9xx: hi6421-spmi-pmic: cleanup header file
staging: hikey9xx: hi6421-spmi-pmic: fix IRQ handler code
staging: hikey9xx: hi6421-spmi-pmic: cleanup IRQ handling code
staging: hikey9xx: hi6421-spmi-pmic: document registers
staging: hikey9xx: hi6421-spmi-pmic: update copyright notes
phy: phy-hi3670-usb3: move driver from staging into phy
spmi: hisi-spmi-controller: move driver from staging
mfd: hi6421-spmi-pmic: move driver from staging
regulator: hi6421v600-regulator: move it from staging
dts: hisilicon: add support for the PMIC found on Hikey 970
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 135 ++++
.../bindings/phy/hisilicon,hi3670-usb3.yaml | 73 ++
.../spmi/hisilicon,hisi-spmi-controller.yaml | 75 ++
MAINTAINERS | 24 +-
.../boot/dts/hisilicon/hi3670-hikey970.dts | 22 +-
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 87 +++
drivers/mfd/Kconfig | 15 +
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 296 ++++++++
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-usb3.c | 668 ++++++++++++++++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421v600-regulator.c | 299 ++++++++
drivers/spmi/Kconfig | 9 +
drivers/spmi/Makefile | 1 +
drivers/spmi/hisi-spmi-controller.c | 367 ++++++++++
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/hikey9xx/Kconfig | 50 --
drivers/staging/hikey9xx/Makefile | 7 -
drivers/staging/hikey9xx/TODO | 5 -
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 326 ---------
.../staging/hikey9xx/hi6421v600-regulator.c | 336 ---------
.../staging/hikey9xx/hisi-spmi-controller.c | 367 ----------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 135 ----
.../hisilicon,hisi-spmi-controller.yaml | 75 --
drivers/staging/hikey9xx/phy-hi3670-usb3.c | 668 ------------------
drivers/staging/hikey9xx/phy-hi3670-usb3.yaml | 73 --
include/linux/mfd/hi6421-spmi-pmic.h | 28 +-
31 files changed, 2072 insertions(+), 2093 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c
create mode 100644 drivers/regulator/hi6421v600-regulator.c
create mode 100644 drivers/spmi/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/Kconfig
delete mode 100644 drivers/staging/hikey9xx/Makefile
delete mode 100644 drivers/staging/hikey9xx/TODO
delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hi6421v600-regulator.c
delete mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.c
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.yaml
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v7 00/14] Move Hisilicon 6421v600 SPMI and USB drivers out of staging
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
To: Greg Kroah-Hartman, Lee Jones, Mark Brown, Vinod Koul
Cc: devel, devicetree, linux-kernel, Mayulong, Mauro Carvalho Chehab,
YueHaibing, Yu Chen, Liam Girdwood, Wei Xu,
Juan Antonio Aldea-Armenteros, Stephen Boyd, Rob Herring,
Christophe JAILLET, linux-arm-kernel, David Gow, Colin Ian King,
Kishon Vijay Abraham I, Alex Dewar, Dan Carpenter
Hi Greg/Mark/Lee/Vinod,
Another rebase , also the top of staging-testing,
This series contain the remaining patches for USB to start working,
except for a final DTS patch.
Patches 1 and 2 convert the SPMI and regulator
drivers to use regmap and simplifies the logic by using
regmap helpers.
Patches 3 to 9 address some issues pointed by Lee at the MFD driver.
I guess the best would be if Greg could apply both patches
also via the staging tree.
Patches 10 to 13 move the drivers and their corresponding
DT documentation bindings out of staging.
Patch 14 contains the DT which describes the regulator,
SPMI controller and MFD.
I'll submit the final patch with USB bindings after having
everything set (e.g. after 5.12-rc1).
Mauro Carvalho Chehab (14):
staging: hikey9xx: spmi driver: convert to regmap
staging: hikey9xx: hi6421v600-regulator: use some regmap helpers
staging: hikey9xx: hi6421-spmi-pmic: rename some vars
staging: hikey9xx: hi6421-spmi-pmic: cleanup probe code
staging: hikey9xx: hi6421-spmi-pmic: cleanup header file
staging: hikey9xx: hi6421-spmi-pmic: fix IRQ handler code
staging: hikey9xx: hi6421-spmi-pmic: cleanup IRQ handling code
staging: hikey9xx: hi6421-spmi-pmic: document registers
staging: hikey9xx: hi6421-spmi-pmic: update copyright notes
phy: phy-hi3670-usb3: move driver from staging into phy
spmi: hisi-spmi-controller: move driver from staging
mfd: hi6421-spmi-pmic: move driver from staging
regulator: hi6421v600-regulator: move it from staging
dts: hisilicon: add support for the PMIC found on Hikey 970
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 135 ++++
.../bindings/phy/hisilicon,hi3670-usb3.yaml | 73 ++
.../spmi/hisilicon,hisi-spmi-controller.yaml | 75 ++
MAINTAINERS | 24 +-
.../boot/dts/hisilicon/hi3670-hikey970.dts | 22 +-
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 87 +++
drivers/mfd/Kconfig | 15 +
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 296 ++++++++
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-usb3.c | 668 ++++++++++++++++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421v600-regulator.c | 299 ++++++++
drivers/spmi/Kconfig | 9 +
drivers/spmi/Makefile | 1 +
drivers/spmi/hisi-spmi-controller.c | 367 ++++++++++
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/hikey9xx/Kconfig | 50 --
drivers/staging/hikey9xx/Makefile | 7 -
drivers/staging/hikey9xx/TODO | 5 -
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 326 ---------
.../staging/hikey9xx/hi6421v600-regulator.c | 336 ---------
.../staging/hikey9xx/hisi-spmi-controller.c | 367 ----------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 135 ----
.../hisilicon,hisi-spmi-controller.yaml | 75 --
drivers/staging/hikey9xx/phy-hi3670-usb3.c | 668 ------------------
drivers/staging/hikey9xx/phy-hi3670-usb3.yaml | 73 --
include/linux/mfd/hi6421-spmi-pmic.h | 28 +-
31 files changed, 2072 insertions(+), 2093 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c
create mode 100644 drivers/regulator/hi6421v600-regulator.c
create mode 100644 drivers/spmi/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/Kconfig
delete mode 100644 drivers/staging/hikey9xx/Makefile
delete mode 100644 drivers/staging/hikey9xx/TODO
delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hi6421v600-regulator.c
delete mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.c
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.yaml
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v7 01/14] staging: hikey9xx: spmi driver: convert to regmap
2021-01-29 15:03 ` Mauro Carvalho Chehab
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
2021-01-29 15:45 ` Greg Kroah-Hartman
-1 siblings, 1 reply; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, Mayulong, Mauro Carvalho Chehab, Greg Kroah-Hartman,
linux-kernel, Lee Jones
Instead of doing its own SPMI I/O implementation, use the
already-existing regmap one.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 115 ++++++------------
.../staging/hikey9xx/hi6421v600-regulator.c | 26 ++--
include/linux/mfd/hi6421-spmi-pmic.h | 7 +-
3 files changed, 52 insertions(+), 96 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 69570876f93e..3d612bd46231 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -41,81 +41,22 @@ static const struct mfd_cell hi6421v600_devs[] = {
{ .name = "hi6421v600-regulator", },
};
-/*
- * The PMIC register is only 8-bit.
- * Hisilicon SoC use hardware to map PMIC register into SoC mapping.
- * At here, we are accessing SoC register with 32-bit.
- */
-int hi6421_spmi_pmic_read(struct hi6421_spmi_pmic *pmic, int reg)
+static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
{
- struct spmi_device *pdev;
- u8 read_value = 0;
- u32 ret;
-
- pdev = to_spmi_device(pmic->dev);
- if (!pdev) {
- pr_err("%s: pdev get failed!\n", __func__);
- return -ENODEV;
- }
-
- ret = spmi_ext_register_readl(pdev, reg, &read_value, 1);
- if (ret) {
- pr_err("%s: spmi_ext_register_readl failed!\n", __func__);
- return ret;
- }
- return read_value;
-}
-EXPORT_SYMBOL(hi6421_spmi_pmic_read);
-
-int hi6421_spmi_pmic_write(struct hi6421_spmi_pmic *pmic, int reg, u32 val)
-{
- struct spmi_device *pdev;
- u32 ret;
-
- pdev = to_spmi_device(pmic->dev);
- if (!pdev) {
- pr_err("%s: pdev get failed!\n", __func__);
- return -ENODEV;
- }
-
- ret = spmi_ext_register_writel(pdev, reg, (unsigned char *)&val, 1);
- if (ret)
- pr_err("%s: spmi_ext_register_writel failed!\n", __func__);
-
- return ret;
-}
-EXPORT_SYMBOL(hi6421_spmi_pmic_write);
-
-int hi6421_spmi_pmic_rmw(struct hi6421_spmi_pmic *pmic, int reg,
- u32 mask, u32 bits)
-{
- unsigned long flags;
- u32 data;
- int ret;
-
- spin_lock_irqsave(&pmic->lock, flags);
- data = hi6421_spmi_pmic_read(pmic, reg) & ~mask;
- data |= mask & bits;
- ret = hi6421_spmi_pmic_write(pmic, reg, data);
- spin_unlock_irqrestore(&pmic->lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(hi6421_spmi_pmic_rmw);
-
-static irqreturn_t hi6421_spmi_irq_handler(int irq, void *data)
-{
- struct hi6421_spmi_pmic *pmic = (struct hi6421_spmi_pmic *)data;
+ struct hi6421_spmi_pmic *pmic = (struct hi6421_spmi_pmic *)priv;
unsigned long pending;
+ unsigned int data;
int i, offset;
for (i = 0; i < HISI_IRQ_ARRAY; i++) {
- pending = hi6421_spmi_pmic_read(pmic, (i + SOC_PMIC_IRQ0_ADDR));
- pending &= HISI_MASK_FIELD;
- if (pending != 0)
- pr_debug("pending[%d]=0x%lx\n\r", i, pending);
+ regmap_read(pmic->map, offset, &data);
+ data &= HISI_MASK_FIELD;
+ if (data != 0)
+ pr_debug("data[%d]=0x%d\n\r", i, data);
+ regmap_write(pmic->map, i + SOC_PMIC_IRQ0_ADDR, data);
- hi6421_spmi_pmic_write(pmic, (i + SOC_PMIC_IRQ0_ADDR), pending);
+ /* for_each_set_bit() macro requires unsigned long */
+ pending = data;
/* solve powerkey order */
if ((i == HISI_IRQ_KEY_NUM) &&
@@ -137,16 +78,18 @@ static irqreturn_t hi6421_spmi_irq_handler(int irq, void *data)
static void hi6421_spmi_irq_mask(struct irq_data *d)
{
struct hi6421_spmi_pmic *pmic = irq_data_get_irq_chip_data(d);
- u32 data, offset;
unsigned long flags;
+ unsigned int data;
+ u32 offset;
offset = (irqd_to_hwirq(d) >> 3);
offset += SOC_PMIC_IRQ_MASK_0_ADDR;
spin_lock_irqsave(&pmic->lock, flags);
- data = hi6421_spmi_pmic_read(pmic, offset);
+
+ regmap_read(pmic->map, offset, &data);
data |= (1 << (irqd_to_hwirq(d) & 0x07));
- hi6421_spmi_pmic_write(pmic, offset, data);
+ regmap_write(pmic->map, offset, data);
spin_unlock_irqrestore(&pmic->lock, flags);
}
@@ -160,9 +103,9 @@ static void hi6421_spmi_irq_unmask(struct irq_data *d)
offset += SOC_PMIC_IRQ_MASK_0_ADDR;
spin_lock_irqsave(&pmic->lock, flags);
- data = hi6421_spmi_pmic_read(pmic, offset);
+ regmap_read(pmic->map, offset, &data);
data &= ~(1 << (irqd_to_hwirq(d) & 0x07));
- hi6421_spmi_pmic_write(pmic, offset, data);
+ regmap_write(pmic->map, offset, data);
spin_unlock_irqrestore(&pmic->lock, flags);
}
@@ -194,27 +137,36 @@ static const struct irq_domain_ops hi6421_spmi_domain_ops = {
static void hi6421_spmi_pmic_irq_prc(struct hi6421_spmi_pmic *pmic)
{
- int i, pending;
+ int i;
+ unsigned int pending;
for (i = 0 ; i < HISI_IRQ_ARRAY; i++)
- hi6421_spmi_pmic_write(pmic, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+ regmap_write(pmic->map, SOC_PMIC_IRQ_MASK_0_ADDR + i,
HISI_MASK_STATE);
for (i = 0 ; i < HISI_IRQ_ARRAY; i++) {
- pending = hi6421_spmi_pmic_read(pmic, SOC_PMIC_IRQ0_ADDR + i);
+ regmap_read(pmic->map, SOC_PMIC_IRQ0_ADDR + i, &pending);
pr_debug("PMU IRQ address value:irq[0x%x] = 0x%x\n",
SOC_PMIC_IRQ0_ADDR + i, pending);
- hi6421_spmi_pmic_write(pmic, SOC_PMIC_IRQ0_ADDR + i,
- HISI_MASK_STATE);
+ regmap_write(pmic->map, SOC_PMIC_IRQ0_ADDR + i,
+ HISI_MASK_STATE);
}
}
+static const struct regmap_config spmi_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = 0xffff,
+ .fast_io = true
+};
+
static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct hi6421_spmi_pmic *pmic;
+ struct regmap *map;
unsigned int virq;
int ret, i;
@@ -222,9 +174,14 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
if (!pmic)
return -ENOMEM;
+ map = devm_regmap_init_spmi_ext(pdev, &spmi_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
spin_lock_init(&pmic->lock);
pmic->dev = dev;
+ pmic->map = map;
pmic->gpio = of_get_gpio(np, 0);
if (pmic->gpio < 0)
diff --git a/drivers/staging/hikey9xx/hi6421v600-regulator.c b/drivers/staging/hikey9xx/hi6421v600-regulator.c
index 382a0b21643e..9e319fa11137 100644
--- a/drivers/staging/hikey9xx/hi6421v600-regulator.c
+++ b/drivers/staging/hikey9xx/hi6421v600-regulator.c
@@ -12,6 +12,7 @@
#include <linux/mfd/hi6421-spmi-pmic.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/spmi.h>
@@ -100,7 +101,7 @@ static int hi6421_spmi_regulator_is_enabled(struct regulator_dev *rdev)
struct hi6421_spmi_pmic *pmic = sreg->pmic;
u32 reg_val;
- reg_val = hi6421_spmi_pmic_read(pmic, rdev->desc->enable_reg);
+ regmap_read(pmic->map, rdev->desc->enable_reg, ®_val);
return ((reg_val & rdev->desc->enable_mask) != 0);
}
@@ -114,9 +115,9 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
/* cannot enable more than one regulator at one time */
mutex_lock(&sreg->enable_mutex);
- ret = hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,
- rdev->desc->enable_mask,
- rdev->desc->enable_mask);
+ ret = regmap_update_bits(pmic->map, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
/* Avoid powering up multiple devices at the same time */
usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
@@ -131,8 +132,8 @@ static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
struct hi6421_spmi_pmic *pmic = sreg->pmic;
- return hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,
- rdev->desc->enable_mask, 0);
+ return regmap_update_bits(pmic->map, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, 0);
}
static int hi6421_spmi_regulator_get_voltage_sel(struct regulator_dev *rdev)
@@ -141,7 +142,7 @@ static int hi6421_spmi_regulator_get_voltage_sel(struct regulator_dev *rdev)
struct hi6421_spmi_pmic *pmic = sreg->pmic;
u32 reg_val;
- reg_val = hi6421_spmi_pmic_read(pmic, rdev->desc->vsel_reg);
+ regmap_read(pmic->map, rdev->desc->vsel_reg, ®_val);
return (reg_val & rdev->desc->vsel_mask) >> (ffs(rdev->desc->vsel_mask) - 1);
}
@@ -159,8 +160,8 @@ static int hi6421_spmi_regulator_set_voltage_sel(struct regulator_dev *rdev,
reg_val = selector << (ffs(rdev->desc->vsel_mask) - 1);
/* set voltage selector */
- return hi6421_spmi_pmic_rmw(pmic, rdev->desc->vsel_reg,
- rdev->desc->vsel_mask, reg_val);
+ return regmap_update_bits(pmic->map, rdev->desc->vsel_reg,
+ rdev->desc->vsel_mask, reg_val);
}
static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
@@ -169,7 +170,7 @@ static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
struct hi6421_spmi_pmic *pmic = sreg->pmic;
u32 reg_val;
- reg_val = hi6421_spmi_pmic_read(pmic, rdev->desc->enable_reg);
+ regmap_read(pmic->map, rdev->desc->enable_reg, ®_val);
if (reg_val & sreg->eco_mode_mask)
return REGULATOR_MODE_IDLE;
@@ -195,8 +196,8 @@ static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
return -EINVAL;
}
- return hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,
- sreg->eco_mode_mask, val);
+ return regmap_update_bits(pmic->map, rdev->desc->enable_reg,
+ sreg->eco_mode_mask, val);
}
static unsigned int
@@ -304,6 +305,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
config.dev = pdev->dev.parent;
config.driver_data = sreg;
+ config.regmap = pmic->map;
rdev = devm_regulator_register(dev, &info->desc, &config);
if (IS_ERR(rdev)) {
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index 0c2214612c4e..c5a4eac1fdc0 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -12,6 +12,7 @@
#define __HISI_PMIC_H
#include <linux/irqdomain.h>
+#include <linux/regmap.h>
#define HISI_ECO_MODE_ENABLE (1)
#define HISI_ECO_MODE_DISABLE (0)
@@ -25,13 +26,9 @@ struct hi6421_spmi_pmic {
int irq;
int gpio;
unsigned int *irqs;
+ struct regmap *map;
};
-int hi6421_spmi_pmic_read(struct hi6421_spmi_pmic *pmic, int reg);
-int hi6421_spmi_pmic_write(struct hi6421_spmi_pmic *pmic, int reg, u32 val);
-int hi6421_spmi_pmic_rmw(struct hi6421_spmi_pmic *pmic, int reg,
- u32 mask, u32 bits);
-
enum hi6421_spmi_pmic_irq_list {
OTMP = 0,
VBUS_CONNECT,
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 02/14] staging: hikey9xx: hi6421v600-regulator: use some regmap helpers
2021-01-29 15:03 ` Mauro Carvalho Chehab
(?)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, Mayulong, Mauro Carvalho Chehab, Greg Kroah-Hartman,
linux-kernel, Mark Brown
Now that the driver was ported to use regmap, let's use
some help functions in order to simplify the code a little
bit.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../staging/hikey9xx/hi6421v600-regulator.c | 45 ++-----------------
1 file changed, 3 insertions(+), 42 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421v600-regulator.c b/drivers/staging/hikey9xx/hi6421v600-regulator.c
index 9e319fa11137..7090107b9ec2 100644
--- a/drivers/staging/hikey9xx/hi6421v600-regulator.c
+++ b/drivers/staging/hikey9xx/hi6421v600-regulator.c
@@ -95,17 +95,6 @@ static const unsigned int ldo34_voltages[] = {
.eco_uA = ecoamp, \
}
-static int hi6421_spmi_regulator_is_enabled(struct regulator_dev *rdev)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
- struct hi6421_spmi_pmic *pmic = sreg->pmic;
- u32 reg_val;
-
- regmap_read(pmic->map, rdev->desc->enable_reg, ®_val);
-
- return ((reg_val & rdev->desc->enable_mask) != 0);
-}
-
static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
{
struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
@@ -136,34 +125,6 @@ static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
rdev->desc->enable_mask, 0);
}
-static int hi6421_spmi_regulator_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
- struct hi6421_spmi_pmic *pmic = sreg->pmic;
- u32 reg_val;
-
- regmap_read(pmic->map, rdev->desc->vsel_reg, ®_val);
-
- return (reg_val & rdev->desc->vsel_mask) >> (ffs(rdev->desc->vsel_mask) - 1);
-}
-
-static int hi6421_spmi_regulator_set_voltage_sel(struct regulator_dev *rdev,
- unsigned int selector)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
- struct hi6421_spmi_pmic *pmic = sreg->pmic;
- u32 reg_val;
-
- if (selector >= rdev->desc->n_voltages)
- return -EINVAL;
-
- reg_val = selector << (ffs(rdev->desc->vsel_mask) - 1);
-
- /* set voltage selector */
- return regmap_update_bits(pmic->map, rdev->desc->vsel_reg,
- rdev->desc->vsel_mask, reg_val);
-}
-
static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
{
struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
@@ -214,13 +175,13 @@ hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
}
static const struct regulator_ops hi6421_spmi_ldo_rops = {
- .is_enabled = hi6421_spmi_regulator_is_enabled,
+ .is_enabled = regulator_is_enabled_regmap,
.enable = hi6421_spmi_regulator_enable,
.disable = hi6421_spmi_regulator_disable,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_iterate,
- .get_voltage_sel = hi6421_spmi_regulator_get_voltage_sel,
- .set_voltage_sel = hi6421_spmi_regulator_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_mode = hi6421_spmi_regulator_get_mode,
.set_mode = hi6421_spmi_regulator_set_mode,
.get_optimum_mode = hi6421_spmi_regulator_get_optimum_mode,
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 03/14] staging: hikey9xx: hi6421-spmi-pmic: rename some vars
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (2 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, Mayulong, Mauro Carvalho Chehab, Greg Kroah-Hartman,
linux-kernel, Lee Jones
- When referring to regmap, rename map to regmap
- inside hi6421-spmi-pmic, call private data struct as
ddata.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 104 +++++++++---------
.../staging/hikey9xx/hi6421v600-regulator.c | 10 +-
include/linux/mfd/hi6421-spmi-pmic.h | 2 +-
3 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 3d612bd46231..a4ffeb06ed6a 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -43,17 +43,17 @@ static const struct mfd_cell hi6421v600_devs[] = {
static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
{
- struct hi6421_spmi_pmic *pmic = (struct hi6421_spmi_pmic *)priv;
+ struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
unsigned long pending;
unsigned int data;
int i, offset;
for (i = 0; i < HISI_IRQ_ARRAY; i++) {
- regmap_read(pmic->map, offset, &data);
+ regmap_read(ddata->regmap, offset, &data);
data &= HISI_MASK_FIELD;
if (data != 0)
pr_debug("data[%d]=0x%d\n\r", i, data);
- regmap_write(pmic->map, i + SOC_PMIC_IRQ0_ADDR, data);
+ regmap_write(ddata->regmap, i + SOC_PMIC_IRQ0_ADDR, data);
/* for_each_set_bit() macro requires unsigned long */
pending = data;
@@ -61,14 +61,14 @@ static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
/* solve powerkey order */
if ((i == HISI_IRQ_KEY_NUM) &&
((pending & HISI_IRQ_KEY_VALUE) == HISI_IRQ_KEY_VALUE)) {
- generic_handle_irq(pmic->irqs[HISI_IRQ_KEY_DOWN]);
- generic_handle_irq(pmic->irqs[HISI_IRQ_KEY_UP]);
+ generic_handle_irq(ddata->irqs[HISI_IRQ_KEY_DOWN]);
+ generic_handle_irq(ddata->irqs[HISI_IRQ_KEY_UP]);
pending &= (~HISI_IRQ_KEY_VALUE);
}
if (pending) {
for_each_set_bit(offset, &pending, HISI_BITS)
- generic_handle_irq(pmic->irqs[offset + i * HISI_BITS]);
+ generic_handle_irq(ddata->irqs[offset + i * HISI_BITS]);
}
}
@@ -77,7 +77,7 @@ static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
static void hi6421_spmi_irq_mask(struct irq_data *d)
{
- struct hi6421_spmi_pmic *pmic = irq_data_get_irq_chip_data(d);
+ struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
unsigned long flags;
unsigned int data;
u32 offset;
@@ -85,28 +85,28 @@ static void hi6421_spmi_irq_mask(struct irq_data *d)
offset = (irqd_to_hwirq(d) >> 3);
offset += SOC_PMIC_IRQ_MASK_0_ADDR;
- spin_lock_irqsave(&pmic->lock, flags);
+ spin_lock_irqsave(&ddata->lock, flags);
- regmap_read(pmic->map, offset, &data);
+ regmap_read(ddata->regmap, offset, &data);
data |= (1 << (irqd_to_hwirq(d) & 0x07));
- regmap_write(pmic->map, offset, data);
- spin_unlock_irqrestore(&pmic->lock, flags);
+ regmap_write(ddata->regmap, offset, data);
+ spin_unlock_irqrestore(&ddata->lock, flags);
}
static void hi6421_spmi_irq_unmask(struct irq_data *d)
{
- struct hi6421_spmi_pmic *pmic = irq_data_get_irq_chip_data(d);
+ struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
u32 data, offset;
unsigned long flags;
offset = (irqd_to_hwirq(d) >> 3);
offset += SOC_PMIC_IRQ_MASK_0_ADDR;
- spin_lock_irqsave(&pmic->lock, flags);
- regmap_read(pmic->map, offset, &data);
+ spin_lock_irqsave(&ddata->lock, flags);
+ regmap_read(ddata->regmap, offset, &data);
data &= ~(1 << (irqd_to_hwirq(d) & 0x07));
- regmap_write(pmic->map, offset, data);
- spin_unlock_irqrestore(&pmic->lock, flags);
+ regmap_write(ddata->regmap, offset, data);
+ spin_unlock_irqrestore(&ddata->lock, flags);
}
static struct irq_chip hi6421_spmi_pmu_irqchip = {
@@ -120,11 +120,11 @@ static struct irq_chip hi6421_spmi_pmu_irqchip = {
static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw)
{
- struct hi6421_spmi_pmic *pmic = d->host_data;
+ struct hi6421_spmi_pmic *ddata = d->host_data;
irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
handle_simple_irq, "hisi");
- irq_set_chip_data(virq, pmic);
+ irq_set_chip_data(virq, ddata);
irq_set_irq_type(virq, IRQ_TYPE_NONE);
return 0;
@@ -135,21 +135,21 @@ static const struct irq_domain_ops hi6421_spmi_domain_ops = {
.xlate = irq_domain_xlate_twocell,
};
-static void hi6421_spmi_pmic_irq_prc(struct hi6421_spmi_pmic *pmic)
+static void hi6421_spmi_pmic_irq_prc(struct hi6421_spmi_pmic *ddata)
{
int i;
unsigned int pending;
for (i = 0 ; i < HISI_IRQ_ARRAY; i++)
- regmap_write(pmic->map, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
HISI_MASK_STATE);
for (i = 0 ; i < HISI_IRQ_ARRAY; i++) {
- regmap_read(pmic->map, SOC_PMIC_IRQ0_ADDR + i, &pending);
+ regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
pr_debug("PMU IRQ address value:irq[0x%x] = 0x%x\n",
SOC_PMIC_IRQ0_ADDR + i, pending);
- regmap_write(pmic->map, SOC_PMIC_IRQ0_ADDR + i,
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
HISI_MASK_STATE);
}
}
@@ -165,79 +165,79 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
- struct hi6421_spmi_pmic *pmic;
+ struct hi6421_spmi_pmic *ddata;
struct regmap *map;
unsigned int virq;
int ret, i;
- pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
- if (!pmic)
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
return -ENOMEM;
map = devm_regmap_init_spmi_ext(pdev, &spmi_regmap_config);
if (IS_ERR(map))
return PTR_ERR(map);
- spin_lock_init(&pmic->lock);
+ spin_lock_init(&ddata->lock);
- pmic->dev = dev;
- pmic->map = map;
+ ddata->dev = dev;
+ ddata->regmap = map;
- pmic->gpio = of_get_gpio(np, 0);
- if (pmic->gpio < 0)
- return pmic->gpio;
+ ddata->gpio = of_get_gpio(np, 0);
+ if (ddata->gpio < 0)
+ return ddata->gpio;
- if (!gpio_is_valid(pmic->gpio))
+ if (!gpio_is_valid(ddata->gpio))
return -EINVAL;
- ret = devm_gpio_request_one(dev, pmic->gpio, GPIOF_IN, "pmic");
+ ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
if (ret < 0) {
- dev_err(dev, "failed to request gpio%d\n", pmic->gpio);
+ dev_err(dev, "failed to request gpio%d\n", ddata->gpio);
return ret;
}
- pmic->irq = gpio_to_irq(pmic->gpio);
+ ddata->irq = gpio_to_irq(ddata->gpio);
- hi6421_spmi_pmic_irq_prc(pmic);
+ hi6421_spmi_pmic_irq_prc(ddata);
- pmic->irqs = devm_kzalloc(dev, HISI_IRQ_NUM * sizeof(int), GFP_KERNEL);
- if (!pmic->irqs) {
+ ddata->irqs = devm_kzalloc(dev, HISI_IRQ_NUM * sizeof(int), GFP_KERNEL);
+ if (!ddata->irqs) {
ret = -ENOMEM;
goto irq_malloc;
}
- pmic->domain = irq_domain_add_simple(np, HISI_IRQ_NUM, 0,
- &hi6421_spmi_domain_ops, pmic);
- if (!pmic->domain) {
+ ddata->domain = irq_domain_add_simple(np, HISI_IRQ_NUM, 0,
+ &hi6421_spmi_domain_ops, ddata);
+ if (!ddata->domain) {
dev_err(dev, "failed irq domain add simple!\n");
ret = -ENODEV;
goto irq_malloc;
}
for (i = 0; i < HISI_IRQ_NUM; i++) {
- virq = irq_create_mapping(pmic->domain, i);
+ virq = irq_create_mapping(ddata->domain, i);
if (!virq) {
dev_err(dev, "Failed mapping hwirq\n");
ret = -ENOSPC;
goto irq_malloc;
}
- pmic->irqs[i] = virq;
- dev_dbg(dev, "%s: pmic->irqs[%d] = %d\n",
- __func__, i, pmic->irqs[i]);
+ ddata->irqs[i] = virq;
+ dev_dbg(dev, "%s: ddata->irqs[%d] = %d\n",
+ __func__, i, ddata->irqs[i]);
}
- ret = request_threaded_irq(pmic->irq, hi6421_spmi_irq_handler, NULL,
+ ret = request_threaded_irq(ddata->irq, hi6421_spmi_irq_handler, NULL,
IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
- "pmic", pmic);
+ "pmic", ddata);
if (ret < 0) {
dev_err(dev, "could not claim pmic IRQ: error %d\n", ret);
goto irq_malloc;
}
- dev_set_drvdata(&pdev->dev, pmic);
+ dev_set_drvdata(&pdev->dev, ddata);
/*
- * The logic below will rely that the pmic is already stored at
+ * The logic below will rely that the ddata is already stored at
* drvdata.
*/
dev_dbg(&pdev->dev, "SPMI-PMIC: adding children for %pOF\n",
@@ -251,16 +251,16 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
dev_err(dev, "Failed to add child devices: %d\n", ret);
irq_malloc:
- free_irq(pmic->irq, pmic);
+ free_irq(ddata->irq, ddata);
return ret;
}
static void hi6421_spmi_pmic_remove(struct spmi_device *pdev)
{
- struct hi6421_spmi_pmic *pmic = dev_get_drvdata(&pdev->dev);
+ struct hi6421_spmi_pmic *ddata = dev_get_drvdata(&pdev->dev);
- free_irq(pmic->irq, pmic);
+ free_irq(ddata->irq, ddata);
}
static const struct of_device_id pmic_spmi_id_table[] = {
diff --git a/drivers/staging/hikey9xx/hi6421v600-regulator.c b/drivers/staging/hikey9xx/hi6421v600-regulator.c
index 7090107b9ec2..c801bb840962 100644
--- a/drivers/staging/hikey9xx/hi6421v600-regulator.c
+++ b/drivers/staging/hikey9xx/hi6421v600-regulator.c
@@ -104,7 +104,7 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
/* cannot enable more than one regulator at one time */
mutex_lock(&sreg->enable_mutex);
- ret = regmap_update_bits(pmic->map, rdev->desc->enable_reg,
+ ret = regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
@@ -121,7 +121,7 @@ static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
struct hi6421_spmi_pmic *pmic = sreg->pmic;
- return regmap_update_bits(pmic->map, rdev->desc->enable_reg,
+ return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, 0);
}
@@ -131,7 +131,7 @@ static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
struct hi6421_spmi_pmic *pmic = sreg->pmic;
u32 reg_val;
- regmap_read(pmic->map, rdev->desc->enable_reg, ®_val);
+ regmap_read(pmic->regmap, rdev->desc->enable_reg, ®_val);
if (reg_val & sreg->eco_mode_mask)
return REGULATOR_MODE_IDLE;
@@ -157,7 +157,7 @@ static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
return -EINVAL;
}
- return regmap_update_bits(pmic->map, rdev->desc->enable_reg,
+ return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
sreg->eco_mode_mask, val);
}
@@ -266,7 +266,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
config.dev = pdev->dev.parent;
config.driver_data = sreg;
- config.regmap = pmic->map;
+ config.regmap = pmic->regmap;
rdev = devm_regulator_register(dev, &info->desc, &config);
if (IS_ERR(rdev)) {
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index c5a4eac1fdc0..aa8d5382f559 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -26,7 +26,7 @@ struct hi6421_spmi_pmic {
int irq;
int gpio;
unsigned int *irqs;
- struct regmap *map;
+ struct regmap *regmap;
};
enum hi6421_spmi_pmic_irq_list {
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 04/14] staging: hikey9xx: hi6421-spmi-pmic: cleanup probe code
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (3 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Greg Kroah-Hartman, devel, linux-kernel, Mayulong
Cleanup the error handling code, making the messages more
consistent and removing an uneeded call to free_irq().
While here, also remove debug messages and make the
error messages more consistent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 48 +++++++--------------
1 file changed, 15 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index a4ffeb06ed6a..56a991ddea1a 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -166,7 +166,6 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct hi6421_spmi_pmic *ddata;
- struct regmap *map;
unsigned int virq;
int ret, i;
@@ -174,14 +173,13 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
if (!ddata)
return -ENOMEM;
- map = devm_regmap_init_spmi_ext(pdev, &spmi_regmap_config);
- if (IS_ERR(map))
- return PTR_ERR(map);
+ ddata->regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
+ if (IS_ERR(ddata->regmap))
+ return PTR_ERR(ddata->regmap);
spin_lock_init(&ddata->lock);
ddata->dev = dev;
- ddata->regmap = map;
ddata->gpio = of_get_gpio(np, 0);
if (ddata->gpio < 0)
@@ -192,7 +190,7 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
if (ret < 0) {
- dev_err(dev, "failed to request gpio%d\n", ddata->gpio);
+ dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
return ret;
}
@@ -201,57 +199,41 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
hi6421_spmi_pmic_irq_prc(ddata);
ddata->irqs = devm_kzalloc(dev, HISI_IRQ_NUM * sizeof(int), GFP_KERNEL);
- if (!ddata->irqs) {
- ret = -ENOMEM;
- goto irq_malloc;
- }
+ if (!ddata->irqs)
+ return -ENOMEM;
ddata->domain = irq_domain_add_simple(np, HISI_IRQ_NUM, 0,
&hi6421_spmi_domain_ops, ddata);
if (!ddata->domain) {
- dev_err(dev, "failed irq domain add simple!\n");
- ret = -ENODEV;
- goto irq_malloc;
+ dev_err(dev, "Failed to create IRQ domain\n");
+ return -ENODEV;
}
for (i = 0; i < HISI_IRQ_NUM; i++) {
virq = irq_create_mapping(ddata->domain, i);
if (!virq) {
- dev_err(dev, "Failed mapping hwirq\n");
- ret = -ENOSPC;
- goto irq_malloc;
+ dev_err(dev, "Failed to map H/W IRQ\n");
+ return -ENOSPC;
}
ddata->irqs[i] = virq;
- dev_dbg(dev, "%s: ddata->irqs[%d] = %d\n",
- __func__, i, ddata->irqs[i]);
}
ret = request_threaded_irq(ddata->irq, hi6421_spmi_irq_handler, NULL,
IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
"pmic", ddata);
if (ret < 0) {
- dev_err(dev, "could not claim pmic IRQ: error %d\n", ret);
- goto irq_malloc;
+ dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
+ ret);
+ return ret;
}
dev_set_drvdata(&pdev->dev, ddata);
- /*
- * The logic below will rely that the ddata is already stored at
- * drvdata.
- */
- dev_dbg(&pdev->dev, "SPMI-PMIC: adding children for %pOF\n",
- pdev->dev.of_node);
ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
NULL, 0, NULL);
- if (!ret)
- return 0;
-
- dev_err(dev, "Failed to add child devices: %d\n", ret);
-
-irq_malloc:
- free_irq(ddata->irq, ddata);
+ if (ret < 0)
+ dev_err(dev, "Failed to add child devices: %d\n", ret);
return ret;
}
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 05/14] staging: hikey9xx: hi6421-spmi-pmic: cleanup header file
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (4 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, Mayulong, Mauro Carvalho Chehab, Greg Kroah-Hartman,
linux-kernel, Lee Jones
Remove the IRQ list from the header, as this is used only
inside the driver itself. Also, get rid of two unused
defines.
The net result is that only struct hi6421_spmi_pmic remains
on it, as this is used by the regulator driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 17 +++++++++++++++++
include/linux/mfd/hi6421-spmi-pmic.h | 20 --------------------
2 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 56a991ddea1a..1b12464b51b4 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -17,6 +17,23 @@
#include <linux/slab.h>
#include <linux/spmi.h>
+enum hi6421_spmi_pmic_irq_list {
+ OTMP = 0,
+ VBUS_CONNECT,
+ VBUS_DISCONNECT,
+ ALARMON_R,
+ HOLD_6S,
+ HOLD_1S,
+ POWERKEY_UP,
+ POWERKEY_DOWN,
+ OCP_SCP_R,
+ COUL_R,
+ SIM0_HPD_R,
+ SIM0_HPD_F,
+ SIM1_HPD_R,
+ SIM1_HPD_F,
+ PMIC_IRQ_LIST_MAX,
+};
/* 8-bit register offset in PMIC */
#define HISI_MASK_STATE 0xff
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index aa8d5382f559..4d61cb266a18 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -14,9 +14,6 @@
#include <linux/irqdomain.h>
#include <linux/regmap.h>
-#define HISI_ECO_MODE_ENABLE (1)
-#define HISI_ECO_MODE_DISABLE (0)
-
struct hi6421_spmi_pmic {
struct resource *res;
struct device *dev;
@@ -29,21 +26,4 @@ struct hi6421_spmi_pmic {
struct regmap *regmap;
};
-enum hi6421_spmi_pmic_irq_list {
- OTMP = 0,
- VBUS_CONNECT,
- VBUS_DISCONNECT,
- ALARMON_R,
- HOLD_6S,
- HOLD_1S,
- POWERKEY_UP,
- POWERKEY_DOWN,
- OCP_SCP_R,
- COUL_R,
- SIM0_HPD_R,
- SIM0_HPD_F,
- SIM1_HPD_R,
- SIM1_HPD_F,
- PMIC_IRQ_LIST_MAX,
-};
#endif /* __HISI_PMIC_H */
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 06/14] staging: hikey9xx: hi6421-spmi-pmic: fix IRQ handler code
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (5 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Greg Kroah-Hartman, devel, linux-kernel, Mayulong
The conversion to regmap introduced a regression at the code
which reads from the IRQ register. Address that.
Fixes: 8148fe6afb24 ("staging: hikey9xx: spmi driver: convert to regmap")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 1b12464b51b4..ff13220c3038 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -66,7 +66,7 @@ static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
int i, offset;
for (i = 0; i < HISI_IRQ_ARRAY; i++) {
- regmap_read(ddata->regmap, offset, &data);
+ regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &data);
data &= HISI_MASK_FIELD;
if (data != 0)
pr_debug("data[%d]=0x%d\n\r", i, data);
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 07/14] staging: hikey9xx: hi6421-spmi-pmic: cleanup IRQ handling code
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (6 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Greg Kroah-Hartman, devel, linux-kernel, Mayulong
- Use BIT() and GENMASK();
- Remove duplicated mask definitions;
- Simplify the code under IRQ handler;
- Add a few extra blank lines to make easier to see
spin_lock/spin_unlock;
- Remove debug code;
- Fix a few minor coding style issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 68 +++++++++------------
1 file changed, 29 insertions(+), 39 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index ff13220c3038..f2af1760add9 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -7,6 +7,7 @@
//
// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
@@ -34,25 +35,19 @@ enum hi6421_spmi_pmic_irq_list {
SIM1_HPD_F,
PMIC_IRQ_LIST_MAX,
};
-/* 8-bit register offset in PMIC */
-#define HISI_MASK_STATE 0xff
#define HISI_IRQ_ARRAY 2
#define HISI_IRQ_NUM (HISI_IRQ_ARRAY * 8)
+#define HISI_IRQ_MASK GENMASK(1, 0)
#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
#define SOC_PMIC_IRQ0_ADDR 0x0212
#define HISI_IRQ_KEY_NUM 0
-#define HISI_IRQ_KEY_VALUE 0xc0
-#define HISI_IRQ_KEY_DOWN 7
-#define HISI_IRQ_KEY_UP 6
-#define HISI_MASK_FIELD 0xFF
#define HISI_BITS 8
-
-/*define the first group interrupt register number*/
-#define HISI_PMIC_FIRST_GROUP_INT_NUM 2
+#define HISI_IRQ_KEY_VALUE (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
+#define HISI_MASK GENMASK(HISI_BITS - 1, 0)
static const struct mfd_cell hi6421v600_devs[] = {
{ .name = "hi6421v600-regulator", },
@@ -62,31 +57,26 @@ static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
{
struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
unsigned long pending;
- unsigned int data;
+ unsigned int in;
int i, offset;
for (i = 0; i < HISI_IRQ_ARRAY; i++) {
- regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &data);
- data &= HISI_MASK_FIELD;
- if (data != 0)
- pr_debug("data[%d]=0x%d\n\r", i, data);
- regmap_write(ddata->regmap, i + SOC_PMIC_IRQ0_ADDR, data);
+ regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
+ pending = HISI_MASK & in;
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, pending);
- /* for_each_set_bit() macro requires unsigned long */
- pending = data;
-
- /* solve powerkey order */
- if ((i == HISI_IRQ_KEY_NUM) &&
- ((pending & HISI_IRQ_KEY_VALUE) == HISI_IRQ_KEY_VALUE)) {
- generic_handle_irq(ddata->irqs[HISI_IRQ_KEY_DOWN]);
- generic_handle_irq(ddata->irqs[HISI_IRQ_KEY_UP]);
+ if (i == HISI_IRQ_KEY_NUM &&
+ (pending & HISI_IRQ_KEY_VALUE) == HISI_IRQ_KEY_VALUE) {
+ generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
+ generic_handle_irq(ddata->irqs[POWERKEY_UP]);
pending &= (~HISI_IRQ_KEY_VALUE);
}
- if (pending) {
- for_each_set_bit(offset, &pending, HISI_BITS)
- generic_handle_irq(ddata->irqs[offset + i * HISI_BITS]);
- }
+ if (!pending)
+ continue;
+
+ for_each_set_bit(offset, &pending, HISI_BITS)
+ generic_handle_irq(ddata->irqs[offset + i * HISI_BITS]);
}
return IRQ_HANDLED;
@@ -99,7 +89,7 @@ static void hi6421_spmi_irq_mask(struct irq_data *d)
unsigned int data;
u32 offset;
- offset = (irqd_to_hwirq(d) >> 3);
+ offset = (irqd_to_hwirq(d) >> HISI_IRQ_MASK);
offset += SOC_PMIC_IRQ_MASK_0_ADDR;
spin_lock_irqsave(&ddata->lock, flags);
@@ -107,6 +97,7 @@ static void hi6421_spmi_irq_mask(struct irq_data *d)
regmap_read(ddata->regmap, offset, &data);
data |= (1 << (irqd_to_hwirq(d) & 0x07));
regmap_write(ddata->regmap, offset, data);
+
spin_unlock_irqrestore(&ddata->lock, flags);
}
@@ -120,9 +111,11 @@ static void hi6421_spmi_irq_unmask(struct irq_data *d)
offset += SOC_PMIC_IRQ_MASK_0_ADDR;
spin_lock_irqsave(&ddata->lock, flags);
+
regmap_read(ddata->regmap, offset, &data);
data &= ~(1 << (irqd_to_hwirq(d) & 0x07));
regmap_write(ddata->regmap, offset, data);
+
spin_unlock_irqrestore(&ddata->lock, flags);
}
@@ -152,28 +145,25 @@ static const struct irq_domain_ops hi6421_spmi_domain_ops = {
.xlate = irq_domain_xlate_twocell,
};
-static void hi6421_spmi_pmic_irq_prc(struct hi6421_spmi_pmic *ddata)
+static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
{
int i;
unsigned int pending;
- for (i = 0 ; i < HISI_IRQ_ARRAY; i++)
+ for (i = 0; i < HISI_IRQ_ARRAY; i++)
regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
- HISI_MASK_STATE);
+ HISI_MASK);
- for (i = 0 ; i < HISI_IRQ_ARRAY; i++) {
+ for (i = 0; i < HISI_IRQ_ARRAY; i++) {
regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
-
- pr_debug("PMU IRQ address value:irq[0x%x] = 0x%x\n",
- SOC_PMIC_IRQ0_ADDR + i, pending);
regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
- HISI_MASK_STATE);
+ HISI_MASK);
}
}
-static const struct regmap_config spmi_regmap_config = {
+static const struct regmap_config regmap_config = {
.reg_bits = 16,
- .val_bits = 8,
+ .val_bits = HISI_BITS,
.max_register = 0xffff,
.fast_io = true
};
@@ -213,7 +203,7 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
ddata->irq = gpio_to_irq(ddata->gpio);
- hi6421_spmi_pmic_irq_prc(ddata);
+ hi6421_spmi_pmic_irq_init(ddata);
ddata->irqs = devm_kzalloc(dev, HISI_IRQ_NUM * sizeof(int), GFP_KERNEL);
if (!ddata->irqs)
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 08/14] staging: hikey9xx: hi6421-spmi-pmic: document registers
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (7 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Greg Kroah-Hartman, devel, linux-kernel, Mayulong
Make it clearer about how the IRQ registers are filled by adding
a table with them, with two macros used to calculate the mask
register.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 38 +++++++++++++++++----
1 file changed, 31 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index f2af1760add9..b11401ebcc03 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -38,10 +38,6 @@ enum hi6421_spmi_pmic_irq_list {
#define HISI_IRQ_ARRAY 2
#define HISI_IRQ_NUM (HISI_IRQ_ARRAY * 8)
-#define HISI_IRQ_MASK GENMASK(1, 0)
-
-#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
-#define SOC_PMIC_IRQ0_ADDR 0x0212
#define HISI_IRQ_KEY_NUM 0
@@ -49,6 +45,35 @@ enum hi6421_spmi_pmic_irq_list {
#define HISI_IRQ_KEY_VALUE (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
#define HISI_MASK GENMASK(HISI_BITS - 1, 0)
+/*
+ * The IRQs are mapped as:
+ *
+ * ====================== ============= ============ =====
+ * IRQ MASK REGISTER IRQ REGISTER BIT
+ * ====================== ============= ============ =====
+ * OTMP 0x0202 0x212 bit 0
+ * VBUS_CONNECT 0x0202 0x212 bit 1
+ * VBUS_DISCONNECT 0x0202 0x212 bit 2
+ * ALARMON_R 0x0202 0x212 bit 3
+ * HOLD_6S 0x0202 0x212 bit 4
+ * HOLD_1S 0x0202 0x212 bit 5
+ * POWERKEY_UP 0x0202 0x212 bit 6
+ * POWERKEY_DOWN 0x0202 0x212 bit 7
+ *
+ * OCP_SCP_R 0x0203 0x213 bit 0
+ * COUL_R 0x0203 0x213 bit 1
+ * SIM0_HPD_R 0x0203 0x213 bit 2
+ * SIM0_HPD_F 0x0203 0x213 bit 3
+ * SIM1_HPD_R 0x0203 0x213 bit 4
+ * SIM1_HPD_F 0x0203 0x213 bit 5
+ * ====================== ============= ============ =====
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
+#define SOC_PMIC_IRQ0_ADDR 0x0212
+
+#define IRQ_MASK_REGISTER(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \ irqd_to_hwirq(irq_data) >> 3)
+#define IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & 0x07)
+
static const struct mfd_cell hi6421v600_devs[] = {
{ .name = "hi6421v600-regulator", },
};
@@ -89,13 +114,12 @@ static void hi6421_spmi_irq_mask(struct irq_data *d)
unsigned int data;
u32 offset;
- offset = (irqd_to_hwirq(d) >> HISI_IRQ_MASK);
- offset += SOC_PMIC_IRQ_MASK_0_ADDR;
+ offset = IRQ_MASK_REGISTER(d);
spin_lock_irqsave(&ddata->lock, flags);
regmap_read(ddata->regmap, offset, &data);
- data |= (1 << (irqd_to_hwirq(d) & 0x07));
+ data |= IRQ_MASK_BIT(d);
regmap_write(ddata->regmap, offset, data);
spin_unlock_irqrestore(&ddata->lock, flags);
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 09/14] staging: hikey9xx: hi6421-spmi-pmic: update copyright notes
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (8 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, Mayulong, Mauro Carvalho Chehab, Greg Kroah-Hartman,
linux-kernel, Lee Jones
At PMIC subsystem, C89 comments are preferred over C99.
While here, also update the copyrights of the header file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 14 +++++++-------
include/linux/mfd/hi6421-spmi-pmic.h | 1 +
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index b11401ebcc03..e91ff07b5af8 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -1,11 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
-//
-// Device driver for regulators in HISI PMIC IC
-//
-// Copyright (c) 2013 Linaro Ltd.
-// Copyright (c) 2011 Hisilicon.
-//
-// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+ */
#include <linux/bitops.h>
#include <linux/interrupt.h>
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index 4d61cb266a18..2660226138b8 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -4,6 +4,7 @@
*
* Copyright (c) 2013 Linaro Ltd.
* Copyright (C) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
*
* Guodong Xu <guodong.xu@linaro.org>
*/
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 10/14] phy: phy-hi3670-usb3: move driver from staging into phy
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (9 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
2021-02-04 8:03 ` Vinod Koul
-1 siblings, 1 reply; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, devicetree, Mauro Carvalho Chehab, Greg Kroah-Hartman,
Yu Chen, linux-kernel, Kishon Vijay Abraham I, Vinod Koul,
Rob Herring, David Gow, Alex Dewar
The phy USB3 driver for Hisilicon 970 (hi3670) is ready
for mainstream. Mode it from staging into the main driver's
phy/ directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../bindings/phy/hisilicon,hi3670-usb3.yaml | 73 ++
MAINTAINERS | 9 +-
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-usb3.c | 668 ++++++++++++++++++
drivers/staging/hikey9xx/Kconfig | 11 -
drivers/staging/hikey9xx/Makefile | 2 -
drivers/staging/hikey9xx/phy-hi3670-usb3.c | 668 ------------------
drivers/staging/hikey9xx/phy-hi3670-usb3.yaml | 73 --
9 files changed, 760 insertions(+), 755 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.c
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.yaml
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
new file mode 100644
index 000000000000..ebd78acfe2de
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin970 USB PHY
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+ Bindings for USB3 PHY on HiSilicon Kirin 970.
+
+properties:
+ compatible:
+ const: hisilicon,hi3670-usb-phy
+
+ "#phy-cells":
+ const: 0
+
+ hisilicon,pericrg-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle of syscon used to control iso refclk.
+
+ hisilicon,pctrl-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle of syscon used to control usb tcxo.
+
+ hisilicon,sctrl-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle of syscon used to control phy deep sleep.
+
+ hisilicon,eye-diagram-param:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Eye diagram for phy.
+
+ hisilicon,tx-vboost-lvl:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: TX level vboost for phy.
+
+required:
+ - compatible
+ - hisilicon,pericrg-syscon
+ - hisilicon,pctrl-syscon
+ - hisilicon,sctrl-syscon
+ - hisilicon,eye-diagram-param
+ - hisilicon,tx-vboost-lvl
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy {
+ compatible = "hisilicon,hi3670-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,sctrl-syscon = <&sctrl>;
+ hisilicon,eye-diagram-param = <0xfdfee4>;
+ hisilicon,tx-vboost-lvl = <0x5>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 992fe3b0900a..fb49e654a1db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18371,7 +18371,7 @@ L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/roles/intel-xhci-usb-role-switch.c
-USB IP DRIVER FOR HISILICON KIRIN
+USB IP DRIVER FOR HISILICON KIRIN 960
M: Yu Chen <chenyu56@huawei.com>
M: Binghui Wang <wangbinghui@hisilicon.com>
L: linux-usb@vger.kernel.org
@@ -18379,6 +18379,13 @@ S: Maintained
F: Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
F: drivers/phy/hisilicon/phy-hi3660-usb3.c
+USB IP DRIVER FOR HISILICON KIRIN 970
+M: Mauro Carvalho Chehab <mchehab@kernel.org>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/phy/hisilicon,kirin970-usb3.yaml
+F: drivers/phy/hisilicon/phy-kirin970-usb3.c
+
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index 1c73053bcc98..4d008cfc279c 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -23,6 +23,16 @@ config PHY_HI3660_USB
To compile this driver as a module, choose M here.
+config PHY_HI3670_USB
+ tristate "hi3670 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI3670 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
config PHY_HISTB_COMBPHY
tristate "HiSilicon STB SoCs COMBPHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index 92e874ae9c74..51729868145b 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
+obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3670-usb3.c b/drivers/phy/hisilicon/phy-hi3670-usb3.c
new file mode 100644
index 000000000000..8918f3665f8e
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3670-usb3.c
@@ -0,0 +1,668 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Phy provider for USB 3.1 controller on HiSilicon Kirin970 platform
+ *
+ * Copyright (C) 2017-2020 Hilisicon Electronics Co., Ltd.
+ * http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SCTRL_SCDEEPSLEEPED (0x0)
+#define USB_CLK_SELECTED BIT(20)
+
+#define PERI_CRG_PEREN0 (0x00)
+#define PERI_CRG_PERDIS0 (0x04)
+#define PERI_CRG_PEREN4 (0x40)
+#define PERI_CRG_PERDIS4 (0x44)
+#define PERI_CRG_PERRSTEN4 (0x90)
+#define PERI_CRG_PERRSTDIS4 (0x94)
+#define PERI_CRG_ISODIS (0x148)
+#define PERI_CRG_PEREN6 (0x410)
+#define PERI_CRG_PERDIS6 (0x414)
+
+#define USB_REFCLK_ISO_EN BIT(25)
+
+#define GT_CLK_USB2PHY_REF BIT(19)
+
+#define PCTRL_PERI_CTRL3 (0x10)
+#define PCTRL_PERI_CTRL3_MSK_START (16)
+#define USB_TCXO_EN BIT(1)
+
+#define PCTRL_PERI_CTRL24 (0x64)
+#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
+
+#define USB3OTG_CTRL0 (0x00)
+#define USB3OTG_CTRL3 (0x0c)
+#define USB3OTG_CTRL4 (0x10)
+#define USB3OTG_CTRL5 (0x14)
+#define USB3OTG_CTRL7 (0x1c)
+#define USB_MISC_CFG50 (0x50)
+#define USB_MISC_CFG54 (0x54)
+#define USB_MISC_CFG58 (0x58)
+#define USB_MISC_CFG5C (0x5c)
+#define USB_MISC_CFGA0 (0xa0)
+#define TCA_CLK_RST (0x200)
+#define TCA_INTR_EN (0x204)
+#define TCA_INTR_STS (0x208)
+#define TCA_GCFG (0x210)
+#define TCA_TCPC (0x214)
+#define TCA_SYSMODE_CFG (0x218)
+#define TCA_VBUS_CTRL (0x240)
+
+#define CTRL0_USB3_VBUSVLD BIT(7)
+#define CTRL0_USB3_VBUSVLD_SEL BIT(6)
+
+#define CTRL3_USB2_VBUSVLDEXT0 BIT(6)
+#define CTRL3_USB2_VBUSVLDEXTSEL0 BIT(5)
+
+#define CTRL5_USB2_SIDDQ BIT(0)
+
+#define CTRL7_USB2_REFCLKSEL_MASK GENMASK(4, 3)
+#define CTRL7_USB2_REFCLKSEL_ABB (BIT(4) | BIT(3))
+#define CTRL7_USB2_REFCLKSEL_PAD BIT(4)
+
+#define CFG50_USB3_PHY_TEST_POWERDOWN BIT(23)
+
+#define CFG54_USB31PHY_CR_ADDR_MASK GENMASK(31, 16)
+
+#define CFG54_USB3PHY_REF_USE_PAD BIT(12)
+#define CFG54_PHY0_PMA_PWR_STABLE BIT(11)
+#define CFG54_PHY0_PCS_PWR_STABLE BIT(9)
+#define CFG54_USB31PHY_CR_ACK BIT(7)
+#define CFG54_USB31PHY_CR_WR_EN BIT(5)
+#define CFG54_USB31PHY_CR_SEL BIT(4)
+#define CFG54_USB31PHY_CR_RD_EN BIT(3)
+#define CFG54_USB31PHY_CR_CLK BIT(2)
+#define CFG54_USB3_PHY0_ANA_PWR_EN BIT(1)
+
+#define CFG58_USB31PHY_CR_DATA_MASK GENMASK(31, 16)
+
+#define CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN BIT(1)
+
+#define CFGA0_VAUX_RESET BIT(9)
+#define CFGA0_USB31C_RESET BIT(8)
+#define CFGA0_USB2PHY_REFCLK_SELECT BIT(4)
+#define CFGA0_USB3PHY_RESET BIT(1)
+#define CFGA0_USB2PHY_POR BIT(0)
+
+#define INTR_EN_XA_TIMEOUT_EVT_EN BIT(1)
+#define INTR_EN_XA_ACK_EVT_EN BIT(0)
+
+#define CLK_RST_TCA_REF_CLK_EN BIT(1)
+#define CLK_RST_SUSPEND_CLK_EN BIT(0)
+
+#define GCFG_ROLE_HSTDEV BIT(4)
+#define GCFG_OP_MODE GENMASK(1, 0)
+#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0)
+
+#define TCPC_VALID BIT(4)
+#define TCPC_LOW_POWER_EN BIT(3)
+#define TCPC_MUX_CONTROL_MASK GENMASK(1, 0)
+#define TCPC_MUX_CONTROL_USB31 BIT(0)
+
+#define SYSMODE_CFG_TYPEC_DISABLE BIT(3)
+
+#define VBUS_CTRL_POWERPRESENT_OVERRD GENMASK(3, 2)
+#define VBUS_CTRL_VBUSVALID_OVERRD GENMASK(1, 0)
+
+#define KIRIN970_USB_DEFAULT_PHY_PARAM (0xfdfee4)
+#define KIRIN970_USB_DEFAULT_PHY_VBOOST (0x5)
+
+#define TX_VBOOST_LVL_REG (0xf)
+#define TX_VBOOST_LVL_START (6)
+#define TX_VBOOST_LVL_ENABLE BIT(9)
+
+struct hi3670_priv {
+ struct device *dev;
+ struct regmap *peri_crg;
+ struct regmap *pctrl;
+ struct regmap *sctrl;
+ struct regmap *usb31misc;
+
+ u32 eye_diagram_param;
+ u32 tx_vboost_lvl;
+
+ u32 peri_crg_offset;
+ u32 pctrl_offset;
+ u32 usb31misc_offset;
+};
+
+static int hi3670_phy_cr_clk(struct regmap *usb31misc)
+{
+ int ret;
+
+ /* Clock up */
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_CLK, CFG54_USB31PHY_CR_CLK);
+ if (ret)
+ return ret;
+
+ /* Clock down */
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_CLK, 0);
+
+ return ret;
+}
+
+static int hi3670_phy_cr_set_sel(struct regmap *usb31misc)
+{
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_SEL, CFG54_USB31PHY_CR_SEL);
+}
+
+static int hi3670_phy_cr_start(struct regmap *usb31misc, int direction)
+{
+ int ret, reg;
+
+ if (direction)
+ reg = CFG54_USB31PHY_CR_WR_EN;
+ else
+ reg = CFG54_USB31PHY_CR_RD_EN;
+
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, reg, reg);
+
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_RD_EN | CFG54_USB31PHY_CR_WR_EN, 0);
+}
+
+static int hi3670_phy_cr_wait_ack(struct regmap *usb31misc)
+{
+ u32 reg;
+ int retry = 10;
+ int ret;
+
+ while (retry-- > 0) {
+ ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
+ if (ret)
+ return ret;
+ if ((reg & CFG54_USB31PHY_CR_ACK) == CFG54_USB31PHY_CR_ACK)
+ return 0;
+
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+
+ usleep_range(10, 20);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int hi3670_phy_cr_set_addr(struct regmap *usb31misc, u32 addr)
+{
+ u32 reg;
+ int ret;
+
+ ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
+ if (ret)
+ return ret;
+
+ reg = FIELD_PREP(CFG54_USB31PHY_CR_ADDR_MASK, addr);
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_ADDR_MASK, reg);
+
+ return ret;
+}
+
+static int hi3670_phy_cr_read(struct regmap *usb31misc, u32 addr, u32 *val)
+{
+ int reg;
+ int i;
+ int ret;
+
+ for (i = 0; i < 100; i++) {
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+ }
+
+ ret = hi3670_phy_cr_set_sel(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_set_addr(usb31misc, addr);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_start(usb31misc, 0);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_wait_ack(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(usb31misc, USB_MISC_CFG58, ®);
+ if (ret)
+ return ret;
+
+ *val = FIELD_GET(CFG58_USB31PHY_CR_DATA_MASK, reg);
+
+ return 0;
+}
+
+static int hi3670_phy_cr_write(struct regmap *usb31misc, u32 addr, u32 val)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < 100; i++) {
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+ }
+
+ ret = hi3670_phy_cr_set_sel(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_set_addr(usb31misc, addr);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(usb31misc, USB_MISC_CFG58,
+ FIELD_PREP(CFG58_USB31PHY_CR_DATA_MASK, val));
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_start(usb31misc, 1);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_wait_ack(usb31misc);
+
+ return ret;
+}
+
+static int hi3670_phy_set_params(struct hi3670_priv *priv)
+{
+ u32 reg;
+ int ret;
+ int retry = 3;
+
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL4,
+ priv->eye_diagram_param);
+ if (ret) {
+ dev_err(priv->dev, "set USB3OTG_CTRL4 failed\n");
+ return ret;
+ }
+
+ while (retry-- > 0) {
+ ret = hi3670_phy_cr_read(priv->usb31misc,
+ TX_VBOOST_LVL_REG, ®);
+ if (!ret)
+ break;
+
+ if (ret != -ETIMEDOUT) {
+ dev_err(priv->dev, "read TX_VBOOST_LVL_REG failed\n");
+ return ret;
+ }
+ }
+ if (ret)
+ return ret;
+
+ reg |= (TX_VBOOST_LVL_ENABLE | (priv->tx_vboost_lvl << TX_VBOOST_LVL_START));
+ ret = hi3670_phy_cr_write(priv->usb31misc, TX_VBOOST_LVL_REG, reg);
+ if (ret)
+ dev_err(priv->dev, "write TX_VBOOST_LVL_REG failed\n");
+
+ return ret;
+}
+
+static bool hi3670_is_abbclk_selected(struct hi3670_priv *priv)
+{
+ u32 reg;
+
+ if (!priv->sctrl) {
+ dev_err(priv->dev, "priv->sctrl is null!\n");
+ return false;
+ }
+
+ if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, ®)) {
+ dev_err(priv->dev, "SCTRL_SCDEEPSLEEPED read failed!\n");
+ return false;
+ }
+
+ if ((reg & USB_CLK_SELECTED) == 0)
+ return false;
+
+ return true;
+}
+
+static int hi3670_config_phy_clock(struct hi3670_priv *priv)
+{
+ u32 val, mask;
+ int ret;
+
+ if (!hi3670_is_abbclk_selected(priv)) {
+ /* usb refclk iso disable */
+ ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS,
+ USB_REFCLK_ISO_EN);
+ if (ret)
+ goto out;
+
+ /* enable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN |
+ (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START));
+
+ /* select usbphy clk from abb */
+ mask = SC_CLK_USB3PHY_3MUX1_SEL;
+ ret = regmap_update_bits(priv->pctrl,
+ PCTRL_PERI_CTRL24, mask, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
+ CFGA0_USB2PHY_REFCLK_SELECT, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
+ if (ret)
+ goto out;
+ val &= ~CTRL7_USB2_REFCLKSEL_MASK;
+ val |= CTRL7_USB2_REFCLKSEL_ABB;
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
+ if (ret)
+ goto out;
+
+ return 0;
+ }
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
+ CFG54_USB3PHY_REF_USE_PAD,
+ CFG54_USB3PHY_REF_USE_PAD);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
+ CFGA0_USB2PHY_REFCLK_SELECT,
+ CFGA0_USB2PHY_REFCLK_SELECT);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
+ if (ret)
+ goto out;
+ val &= ~CTRL7_USB2_REFCLKSEL_MASK;
+ val |= CTRL7_USB2_REFCLKSEL_PAD;
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->peri_crg,
+ PERI_CRG_PEREN6, GT_CLK_USB2PHY_REF);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_config_tca(struct hi3670_priv *priv)
+{
+ u32 val, mask;
+ int ret;
+
+ ret = regmap_write(priv->usb31misc, TCA_INTR_STS, 0xffff);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->usb31misc, TCA_INTR_EN,
+ INTR_EN_XA_TIMEOUT_EVT_EN | INTR_EN_XA_ACK_EVT_EN);
+ if (ret)
+ goto out;
+
+ mask = CLK_RST_TCA_REF_CLK_EN | CLK_RST_SUSPEND_CLK_EN;
+ ret = regmap_update_bits(priv->usb31misc, TCA_CLK_RST, mask, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, TCA_GCFG,
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE,
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG,
+ SYSMODE_CFG_TYPEC_DISABLE, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, TCA_TCPC, &val);
+ if (ret)
+ goto out;
+ val &= ~(TCPC_VALID | TCPC_LOW_POWER_EN | TCPC_MUX_CONTROL_MASK);
+ val |= (TCPC_VALID | TCPC_MUX_CONTROL_USB31);
+ ret = regmap_write(priv->usb31misc, TCA_TCPC, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->usb31misc, TCA_VBUS_CTRL,
+ VBUS_CTRL_POWERPRESENT_OVERRD | VBUS_CTRL_VBUSVALID_OVERRD);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_phy_init(struct phy *phy)
+{
+ struct hi3670_priv *priv = phy_get_drvdata(phy);
+ u32 val;
+ int ret;
+
+ /* assert controller */
+ val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET |
+ CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0);
+ if (ret)
+ goto out;
+
+ ret = hi3670_config_phy_clock(priv);
+ if (ret)
+ goto out;
+
+ /* Exit from IDDQ mode */
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL5,
+ CTRL5_USB2_SIDDQ, 0);
+ if (ret)
+ goto out;
+
+ /* Release USB31 PHY out of TestPowerDown mode */
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG50,
+ CFG50_USB3_PHY_TEST_POWERDOWN, 0);
+ if (ret)
+ goto out;
+
+ /* Deassert phy */
+ val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ /* Tell the PHY power is stable */
+ val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE |
+ CFG54_PHY0_PMA_PWR_STABLE;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
+ val, val);
+ if (ret)
+ goto out;
+
+ ret = hi3670_config_tca(priv);
+ if (ret)
+ goto out;
+
+ /* Enable SSC */
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG5C,
+ CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN,
+ CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN);
+ if (ret)
+ goto out;
+
+ /* Deassert controller */
+ val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ /* Set fake vbus valid signal */
+ val = CTRL0_USB3_VBUSVLD | CTRL0_USB3_VBUSVLD_SEL;
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL0, val, val);
+ if (ret)
+ goto out;
+
+ val = CTRL3_USB2_VBUSVLDEXT0 | CTRL3_USB2_VBUSVLDEXTSEL0;
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL3, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ ret = hi3670_phy_set_params(priv);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_phy_exit(struct phy *phy)
+{
+ struct hi3670_priv *priv = phy_get_drvdata(phy);
+ u32 mask;
+ int ret;
+
+ /* Assert phy */
+ mask = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, mask, 0);
+ if (ret)
+ goto out;
+
+ if (!hi3670_is_abbclk_selected(priv)) {
+ /* disable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+ } else {
+ ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6,
+ GT_CLK_USB2PHY_REF);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+ return ret;
+}
+
+static struct phy_ops hi3670_phy_ops = {
+ .init = hi3670_phy_init,
+ .exit = hi3670_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hi3670_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+ struct hi3670_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pericrg-syscon");
+ if (IS_ERR(priv->peri_crg)) {
+ dev_err(dev, "no hisilicon,pericrg-syscon\n");
+ return PTR_ERR(priv->peri_crg);
+ }
+
+ priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pctrl-syscon");
+ if (IS_ERR(priv->pctrl)) {
+ dev_err(dev, "no hisilicon,pctrl-syscon\n");
+ return PTR_ERR(priv->pctrl);
+ }
+
+ priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,sctrl-syscon");
+ if (IS_ERR(priv->sctrl)) {
+ dev_err(dev, "no hisilicon,sctrl-syscon\n");
+ return PTR_ERR(priv->sctrl);
+ }
+
+ /* node of hi3670 phy is a sub-node of usb3_otg_bc */
+ priv->usb31misc = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(priv->usb31misc)) {
+ dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+ return PTR_ERR(priv->usb31misc);
+ }
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+ &priv->eye_diagram_param))
+ priv->eye_diagram_param = KIRIN970_USB_DEFAULT_PHY_PARAM;
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,tx-vboost-lvl",
+ &priv->tx_vboost_lvl))
+ priv->tx_vboost_lvl = KIRIN970_USB_DEFAULT_PHY_VBOOST;
+
+ phy = devm_phy_create(dev, NULL, &hi3670_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3670_phy_of_match[] = {
+ { .compatible = "hisilicon,hi3670-usb-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, hi3670_phy_of_match);
+
+static struct platform_driver hi3670_phy_driver = {
+ .probe = hi3670_phy_probe,
+ .driver = {
+ .name = "hi3670-usb-phy",
+ .of_match_table = hi3670_phy_of_match,
+ }
+};
+module_platform_driver(hi3670_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Kirin970 USB31 PHY Driver");
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
index 2e48ded92a7e..cc1fc58866c5 100644
--- a/drivers/staging/hikey9xx/Kconfig
+++ b/drivers/staging/hikey9xx/Kconfig
@@ -1,16 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-# to be placed at drivers/phy
-config PHY_HI3670_USB
- tristate "hi3670 USB PHY support"
- depends on (ARCH_HISI && ARM64) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the HISILICON HI3670 USB PHY.
-
- To compile this driver as a module, choose M here.
-
# to be placed at drivers/spmi
config SPMI_HISI3670
tristate "Hisilicon 3670 SPMI Controller"
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
index 1924fadac952..9371dcc3d35b 100644
--- a/drivers/staging/hikey9xx/Makefile
+++ b/drivers/staging/hikey9xx/Makefile
@@ -1,7 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
-
obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o
diff --git a/drivers/staging/hikey9xx/phy-hi3670-usb3.c b/drivers/staging/hikey9xx/phy-hi3670-usb3.c
deleted file mode 100644
index 8918f3665f8e..000000000000
--- a/drivers/staging/hikey9xx/phy-hi3670-usb3.c
+++ /dev/null
@@ -1,668 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Phy provider for USB 3.1 controller on HiSilicon Kirin970 platform
- *
- * Copyright (C) 2017-2020 Hilisicon Electronics Co., Ltd.
- * http://www.huawei.com
- *
- * Authors: Yu Chen <chenyu56@huawei.com>
- */
-
-#include <linux/bitfield.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-
-#define SCTRL_SCDEEPSLEEPED (0x0)
-#define USB_CLK_SELECTED BIT(20)
-
-#define PERI_CRG_PEREN0 (0x00)
-#define PERI_CRG_PERDIS0 (0x04)
-#define PERI_CRG_PEREN4 (0x40)
-#define PERI_CRG_PERDIS4 (0x44)
-#define PERI_CRG_PERRSTEN4 (0x90)
-#define PERI_CRG_PERRSTDIS4 (0x94)
-#define PERI_CRG_ISODIS (0x148)
-#define PERI_CRG_PEREN6 (0x410)
-#define PERI_CRG_PERDIS6 (0x414)
-
-#define USB_REFCLK_ISO_EN BIT(25)
-
-#define GT_CLK_USB2PHY_REF BIT(19)
-
-#define PCTRL_PERI_CTRL3 (0x10)
-#define PCTRL_PERI_CTRL3_MSK_START (16)
-#define USB_TCXO_EN BIT(1)
-
-#define PCTRL_PERI_CTRL24 (0x64)
-#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
-
-#define USB3OTG_CTRL0 (0x00)
-#define USB3OTG_CTRL3 (0x0c)
-#define USB3OTG_CTRL4 (0x10)
-#define USB3OTG_CTRL5 (0x14)
-#define USB3OTG_CTRL7 (0x1c)
-#define USB_MISC_CFG50 (0x50)
-#define USB_MISC_CFG54 (0x54)
-#define USB_MISC_CFG58 (0x58)
-#define USB_MISC_CFG5C (0x5c)
-#define USB_MISC_CFGA0 (0xa0)
-#define TCA_CLK_RST (0x200)
-#define TCA_INTR_EN (0x204)
-#define TCA_INTR_STS (0x208)
-#define TCA_GCFG (0x210)
-#define TCA_TCPC (0x214)
-#define TCA_SYSMODE_CFG (0x218)
-#define TCA_VBUS_CTRL (0x240)
-
-#define CTRL0_USB3_VBUSVLD BIT(7)
-#define CTRL0_USB3_VBUSVLD_SEL BIT(6)
-
-#define CTRL3_USB2_VBUSVLDEXT0 BIT(6)
-#define CTRL3_USB2_VBUSVLDEXTSEL0 BIT(5)
-
-#define CTRL5_USB2_SIDDQ BIT(0)
-
-#define CTRL7_USB2_REFCLKSEL_MASK GENMASK(4, 3)
-#define CTRL7_USB2_REFCLKSEL_ABB (BIT(4) | BIT(3))
-#define CTRL7_USB2_REFCLKSEL_PAD BIT(4)
-
-#define CFG50_USB3_PHY_TEST_POWERDOWN BIT(23)
-
-#define CFG54_USB31PHY_CR_ADDR_MASK GENMASK(31, 16)
-
-#define CFG54_USB3PHY_REF_USE_PAD BIT(12)
-#define CFG54_PHY0_PMA_PWR_STABLE BIT(11)
-#define CFG54_PHY0_PCS_PWR_STABLE BIT(9)
-#define CFG54_USB31PHY_CR_ACK BIT(7)
-#define CFG54_USB31PHY_CR_WR_EN BIT(5)
-#define CFG54_USB31PHY_CR_SEL BIT(4)
-#define CFG54_USB31PHY_CR_RD_EN BIT(3)
-#define CFG54_USB31PHY_CR_CLK BIT(2)
-#define CFG54_USB3_PHY0_ANA_PWR_EN BIT(1)
-
-#define CFG58_USB31PHY_CR_DATA_MASK GENMASK(31, 16)
-
-#define CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN BIT(1)
-
-#define CFGA0_VAUX_RESET BIT(9)
-#define CFGA0_USB31C_RESET BIT(8)
-#define CFGA0_USB2PHY_REFCLK_SELECT BIT(4)
-#define CFGA0_USB3PHY_RESET BIT(1)
-#define CFGA0_USB2PHY_POR BIT(0)
-
-#define INTR_EN_XA_TIMEOUT_EVT_EN BIT(1)
-#define INTR_EN_XA_ACK_EVT_EN BIT(0)
-
-#define CLK_RST_TCA_REF_CLK_EN BIT(1)
-#define CLK_RST_SUSPEND_CLK_EN BIT(0)
-
-#define GCFG_ROLE_HSTDEV BIT(4)
-#define GCFG_OP_MODE GENMASK(1, 0)
-#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0)
-
-#define TCPC_VALID BIT(4)
-#define TCPC_LOW_POWER_EN BIT(3)
-#define TCPC_MUX_CONTROL_MASK GENMASK(1, 0)
-#define TCPC_MUX_CONTROL_USB31 BIT(0)
-
-#define SYSMODE_CFG_TYPEC_DISABLE BIT(3)
-
-#define VBUS_CTRL_POWERPRESENT_OVERRD GENMASK(3, 2)
-#define VBUS_CTRL_VBUSVALID_OVERRD GENMASK(1, 0)
-
-#define KIRIN970_USB_DEFAULT_PHY_PARAM (0xfdfee4)
-#define KIRIN970_USB_DEFAULT_PHY_VBOOST (0x5)
-
-#define TX_VBOOST_LVL_REG (0xf)
-#define TX_VBOOST_LVL_START (6)
-#define TX_VBOOST_LVL_ENABLE BIT(9)
-
-struct hi3670_priv {
- struct device *dev;
- struct regmap *peri_crg;
- struct regmap *pctrl;
- struct regmap *sctrl;
- struct regmap *usb31misc;
-
- u32 eye_diagram_param;
- u32 tx_vboost_lvl;
-
- u32 peri_crg_offset;
- u32 pctrl_offset;
- u32 usb31misc_offset;
-};
-
-static int hi3670_phy_cr_clk(struct regmap *usb31misc)
-{
- int ret;
-
- /* Clock up */
- ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_CLK, CFG54_USB31PHY_CR_CLK);
- if (ret)
- return ret;
-
- /* Clock down */
- ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_CLK, 0);
-
- return ret;
-}
-
-static int hi3670_phy_cr_set_sel(struct regmap *usb31misc)
-{
- return regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_SEL, CFG54_USB31PHY_CR_SEL);
-}
-
-static int hi3670_phy_cr_start(struct regmap *usb31misc, int direction)
-{
- int ret, reg;
-
- if (direction)
- reg = CFG54_USB31PHY_CR_WR_EN;
- else
- reg = CFG54_USB31PHY_CR_RD_EN;
-
- ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, reg, reg);
-
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
-
- return regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_RD_EN | CFG54_USB31PHY_CR_WR_EN, 0);
-}
-
-static int hi3670_phy_cr_wait_ack(struct regmap *usb31misc)
-{
- u32 reg;
- int retry = 10;
- int ret;
-
- while (retry-- > 0) {
- ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
- if (ret)
- return ret;
- if ((reg & CFG54_USB31PHY_CR_ACK) == CFG54_USB31PHY_CR_ACK)
- return 0;
-
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
-
- usleep_range(10, 20);
- }
-
- return -ETIMEDOUT;
-}
-
-static int hi3670_phy_cr_set_addr(struct regmap *usb31misc, u32 addr)
-{
- u32 reg;
- int ret;
-
- ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
- if (ret)
- return ret;
-
- reg = FIELD_PREP(CFG54_USB31PHY_CR_ADDR_MASK, addr);
- ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_ADDR_MASK, reg);
-
- return ret;
-}
-
-static int hi3670_phy_cr_read(struct regmap *usb31misc, u32 addr, u32 *val)
-{
- int reg;
- int i;
- int ret;
-
- for (i = 0; i < 100; i++) {
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
- }
-
- ret = hi3670_phy_cr_set_sel(usb31misc);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_set_addr(usb31misc, addr);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_start(usb31misc, 0);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_wait_ack(usb31misc);
- if (ret)
- return ret;
-
- ret = regmap_read(usb31misc, USB_MISC_CFG58, ®);
- if (ret)
- return ret;
-
- *val = FIELD_GET(CFG58_USB31PHY_CR_DATA_MASK, reg);
-
- return 0;
-}
-
-static int hi3670_phy_cr_write(struct regmap *usb31misc, u32 addr, u32 val)
-{
- int i;
- int ret;
-
- for (i = 0; i < 100; i++) {
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
- }
-
- ret = hi3670_phy_cr_set_sel(usb31misc);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_set_addr(usb31misc, addr);
- if (ret)
- return ret;
-
- ret = regmap_write(usb31misc, USB_MISC_CFG58,
- FIELD_PREP(CFG58_USB31PHY_CR_DATA_MASK, val));
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_start(usb31misc, 1);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_wait_ack(usb31misc);
-
- return ret;
-}
-
-static int hi3670_phy_set_params(struct hi3670_priv *priv)
-{
- u32 reg;
- int ret;
- int retry = 3;
-
- ret = regmap_write(priv->usb31misc, USB3OTG_CTRL4,
- priv->eye_diagram_param);
- if (ret) {
- dev_err(priv->dev, "set USB3OTG_CTRL4 failed\n");
- return ret;
- }
-
- while (retry-- > 0) {
- ret = hi3670_phy_cr_read(priv->usb31misc,
- TX_VBOOST_LVL_REG, ®);
- if (!ret)
- break;
-
- if (ret != -ETIMEDOUT) {
- dev_err(priv->dev, "read TX_VBOOST_LVL_REG failed\n");
- return ret;
- }
- }
- if (ret)
- return ret;
-
- reg |= (TX_VBOOST_LVL_ENABLE | (priv->tx_vboost_lvl << TX_VBOOST_LVL_START));
- ret = hi3670_phy_cr_write(priv->usb31misc, TX_VBOOST_LVL_REG, reg);
- if (ret)
- dev_err(priv->dev, "write TX_VBOOST_LVL_REG failed\n");
-
- return ret;
-}
-
-static bool hi3670_is_abbclk_selected(struct hi3670_priv *priv)
-{
- u32 reg;
-
- if (!priv->sctrl) {
- dev_err(priv->dev, "priv->sctrl is null!\n");
- return false;
- }
-
- if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, ®)) {
- dev_err(priv->dev, "SCTRL_SCDEEPSLEEPED read failed!\n");
- return false;
- }
-
- if ((reg & USB_CLK_SELECTED) == 0)
- return false;
-
- return true;
-}
-
-static int hi3670_config_phy_clock(struct hi3670_priv *priv)
-{
- u32 val, mask;
- int ret;
-
- if (!hi3670_is_abbclk_selected(priv)) {
- /* usb refclk iso disable */
- ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS,
- USB_REFCLK_ISO_EN);
- if (ret)
- goto out;
-
- /* enable usb_tcxo_en */
- ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
- USB_TCXO_EN |
- (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START));
-
- /* select usbphy clk from abb */
- mask = SC_CLK_USB3PHY_3MUX1_SEL;
- ret = regmap_update_bits(priv->pctrl,
- PCTRL_PERI_CTRL24, mask, 0);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
- CFGA0_USB2PHY_REFCLK_SELECT, 0);
- if (ret)
- goto out;
-
- ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
- if (ret)
- goto out;
- val &= ~CTRL7_USB2_REFCLKSEL_MASK;
- val |= CTRL7_USB2_REFCLKSEL_ABB;
- ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
- if (ret)
- goto out;
-
- return 0;
- }
-
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
- CFG54_USB3PHY_REF_USE_PAD,
- CFG54_USB3PHY_REF_USE_PAD);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
- CFGA0_USB2PHY_REFCLK_SELECT,
- CFGA0_USB2PHY_REFCLK_SELECT);
- if (ret)
- goto out;
-
- ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
- if (ret)
- goto out;
- val &= ~CTRL7_USB2_REFCLKSEL_MASK;
- val |= CTRL7_USB2_REFCLKSEL_PAD;
- ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
- if (ret)
- goto out;
-
- ret = regmap_write(priv->peri_crg,
- PERI_CRG_PEREN6, GT_CLK_USB2PHY_REF);
- if (ret)
- goto out;
-
- return 0;
-out:
- dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
- return ret;
-}
-
-static int hi3670_config_tca(struct hi3670_priv *priv)
-{
- u32 val, mask;
- int ret;
-
- ret = regmap_write(priv->usb31misc, TCA_INTR_STS, 0xffff);
- if (ret)
- goto out;
-
- ret = regmap_write(priv->usb31misc, TCA_INTR_EN,
- INTR_EN_XA_TIMEOUT_EVT_EN | INTR_EN_XA_ACK_EVT_EN);
- if (ret)
- goto out;
-
- mask = CLK_RST_TCA_REF_CLK_EN | CLK_RST_SUSPEND_CLK_EN;
- ret = regmap_update_bits(priv->usb31misc, TCA_CLK_RST, mask, 0);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, TCA_GCFG,
- GCFG_ROLE_HSTDEV | GCFG_OP_MODE,
- GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG,
- SYSMODE_CFG_TYPEC_DISABLE, 0);
- if (ret)
- goto out;
-
- ret = regmap_read(priv->usb31misc, TCA_TCPC, &val);
- if (ret)
- goto out;
- val &= ~(TCPC_VALID | TCPC_LOW_POWER_EN | TCPC_MUX_CONTROL_MASK);
- val |= (TCPC_VALID | TCPC_MUX_CONTROL_USB31);
- ret = regmap_write(priv->usb31misc, TCA_TCPC, val);
- if (ret)
- goto out;
-
- ret = regmap_write(priv->usb31misc, TCA_VBUS_CTRL,
- VBUS_CTRL_POWERPRESENT_OVERRD | VBUS_CTRL_VBUSVALID_OVERRD);
- if (ret)
- goto out;
-
- return 0;
-out:
- dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
- return ret;
-}
-
-static int hi3670_phy_init(struct phy *phy)
-{
- struct hi3670_priv *priv = phy_get_drvdata(phy);
- u32 val;
- int ret;
-
- /* assert controller */
- val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET |
- CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0);
- if (ret)
- goto out;
-
- ret = hi3670_config_phy_clock(priv);
- if (ret)
- goto out;
-
- /* Exit from IDDQ mode */
- ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL5,
- CTRL5_USB2_SIDDQ, 0);
- if (ret)
- goto out;
-
- /* Release USB31 PHY out of TestPowerDown mode */
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG50,
- CFG50_USB3_PHY_TEST_POWERDOWN, 0);
- if (ret)
- goto out;
-
- /* Deassert phy */
- val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
- if (ret)
- goto out;
-
- usleep_range(100, 120);
-
- /* Tell the PHY power is stable */
- val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE |
- CFG54_PHY0_PMA_PWR_STABLE;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
- val, val);
- if (ret)
- goto out;
-
- ret = hi3670_config_tca(priv);
- if (ret)
- goto out;
-
- /* Enable SSC */
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG5C,
- CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN,
- CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN);
- if (ret)
- goto out;
-
- /* Deassert controller */
- val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
- if (ret)
- goto out;
-
- usleep_range(100, 120);
-
- /* Set fake vbus valid signal */
- val = CTRL0_USB3_VBUSVLD | CTRL0_USB3_VBUSVLD_SEL;
- ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL0, val, val);
- if (ret)
- goto out;
-
- val = CTRL3_USB2_VBUSVLDEXT0 | CTRL3_USB2_VBUSVLDEXTSEL0;
- ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL3, val, val);
- if (ret)
- goto out;
-
- usleep_range(100, 120);
-
- ret = hi3670_phy_set_params(priv);
- if (ret)
- goto out;
-
- return 0;
-out:
- dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
- return ret;
-}
-
-static int hi3670_phy_exit(struct phy *phy)
-{
- struct hi3670_priv *priv = phy_get_drvdata(phy);
- u32 mask;
- int ret;
-
- /* Assert phy */
- mask = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, mask, 0);
- if (ret)
- goto out;
-
- if (!hi3670_is_abbclk_selected(priv)) {
- /* disable usb_tcxo_en */
- ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
- USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
- } else {
- ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6,
- GT_CLK_USB2PHY_REF);
- if (ret)
- goto out;
- }
-
- return 0;
-out:
- dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
- return ret;
-}
-
-static struct phy_ops hi3670_phy_ops = {
- .init = hi3670_phy_init,
- .exit = hi3670_phy_exit,
- .owner = THIS_MODULE,
-};
-
-static int hi3670_phy_probe(struct platform_device *pdev)
-{
- struct phy_provider *phy_provider;
- struct device *dev = &pdev->dev;
- struct phy *phy;
- struct hi3670_priv *priv;
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- priv->dev = dev;
- priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
- "hisilicon,pericrg-syscon");
- if (IS_ERR(priv->peri_crg)) {
- dev_err(dev, "no hisilicon,pericrg-syscon\n");
- return PTR_ERR(priv->peri_crg);
- }
-
- priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
- "hisilicon,pctrl-syscon");
- if (IS_ERR(priv->pctrl)) {
- dev_err(dev, "no hisilicon,pctrl-syscon\n");
- return PTR_ERR(priv->pctrl);
- }
-
- priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
- "hisilicon,sctrl-syscon");
- if (IS_ERR(priv->sctrl)) {
- dev_err(dev, "no hisilicon,sctrl-syscon\n");
- return PTR_ERR(priv->sctrl);
- }
-
- /* node of hi3670 phy is a sub-node of usb3_otg_bc */
- priv->usb31misc = syscon_node_to_regmap(dev->parent->of_node);
- if (IS_ERR(priv->usb31misc)) {
- dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
- return PTR_ERR(priv->usb31misc);
- }
-
- if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
- &priv->eye_diagram_param))
- priv->eye_diagram_param = KIRIN970_USB_DEFAULT_PHY_PARAM;
-
- if (of_property_read_u32(dev->of_node, "hisilicon,tx-vboost-lvl",
- &priv->tx_vboost_lvl))
- priv->tx_vboost_lvl = KIRIN970_USB_DEFAULT_PHY_VBOOST;
-
- phy = devm_phy_create(dev, NULL, &hi3670_phy_ops);
- if (IS_ERR(phy))
- return PTR_ERR(phy);
-
- phy_set_drvdata(phy, priv);
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- return PTR_ERR_OR_ZERO(phy_provider);
-}
-
-static const struct of_device_id hi3670_phy_of_match[] = {
- { .compatible = "hisilicon,hi3670-usb-phy" },
- { },
-};
-MODULE_DEVICE_TABLE(of, hi3670_phy_of_match);
-
-static struct platform_driver hi3670_phy_driver = {
- .probe = hi3670_phy_probe,
- .driver = {
- .name = "hi3670-usb-phy",
- .of_match_table = hi3670_phy_of_match,
- }
-};
-module_platform_driver(hi3670_phy_driver);
-
-MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Hilisicon Kirin970 USB31 PHY Driver");
diff --git a/drivers/staging/hikey9xx/phy-hi3670-usb3.yaml b/drivers/staging/hikey9xx/phy-hi3670-usb3.yaml
deleted file mode 100644
index ebd78acfe2de..000000000000
--- a/drivers/staging/hikey9xx/phy-hi3670-usb3.yaml
+++ /dev/null
@@ -1,73 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Hisilicon Kirin970 USB PHY
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |+
- Bindings for USB3 PHY on HiSilicon Kirin 970.
-
-properties:
- compatible:
- const: hisilicon,hi3670-usb-phy
-
- "#phy-cells":
- const: 0
-
- hisilicon,pericrg-syscon:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: phandle of syscon used to control iso refclk.
-
- hisilicon,pctrl-syscon:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: phandle of syscon used to control usb tcxo.
-
- hisilicon,sctrl-syscon:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: phandle of syscon used to control phy deep sleep.
-
- hisilicon,eye-diagram-param:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: Eye diagram for phy.
-
- hisilicon,tx-vboost-lvl:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: TX level vboost for phy.
-
-required:
- - compatible
- - hisilicon,pericrg-syscon
- - hisilicon,pctrl-syscon
- - hisilicon,sctrl-syscon
- - hisilicon,eye-diagram-param
- - hisilicon,tx-vboost-lvl
- - "#phy-cells"
-
-additionalProperties: false
-
-examples:
- - |
- bus {
- #address-cells = <2>;
- #size-cells = <2>;
-
- usb3_otg_bc: usb3_otg_bc@ff200000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x0 0xff200000 0x0 0x1000>;
-
- usb_phy {
- compatible = "hisilicon,hi3670-usb-phy";
- #phy-cells = <0>;
- hisilicon,pericrg-syscon = <&crg_ctrl>;
- hisilicon,pctrl-syscon = <&pctrl>;
- hisilicon,sctrl-syscon = <&sctrl>;
- hisilicon,eye-diagram-param = <0xfdfee4>;
- hisilicon,tx-vboost-lvl = <0x5>;
- };
- };
- };
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 11/14] spmi: hisi-spmi-controller: move driver from staging
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (10 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, devicetree, Mayulong, Mauro Carvalho Chehab,
Greg Kroah-Hartman, YueHaibing, linux-kernel, Stephen Boyd,
Rob Herring, Christophe JAILLET, David Gow, Colin Ian King,
Juan Antonio Aldea-Armenteros, Dan Carpenter
The Hisilicon 6421v600 SPMI driver is ready for mainstream.
So, move it from staging.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../spmi/hisilicon,hisi-spmi-controller.yaml | 75 ++++
MAINTAINERS | 7 +
drivers/spmi/Kconfig | 9 +
drivers/spmi/Makefile | 1 +
drivers/spmi/hisi-spmi-controller.c | 367 ++++++++++++++++++
drivers/staging/hikey9xx/Kconfig | 11 -
drivers/staging/hikey9xx/Makefile | 1 -
.../staging/hikey9xx/hisi-spmi-controller.c | 367 ------------------
.../hisilicon,hisi-spmi-controller.yaml | 75 ----
9 files changed, 459 insertions(+), 454 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
create mode 100644 drivers/spmi/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
new file mode 100644
index 000000000000..21f68a9c2df1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+ The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+ It is a MIPI System Power Management (SPMI) controller.
+
+ The PMIC part is provided by
+ drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+properties:
+ $nodename:
+ pattern: "spmi@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,kirin970-spmi-controller
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+ spmi-channel:
+ description: |
+ number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+ - compatible
+ - reg
+ - spmi-channel
+ - "#address-cells"
+ - "#size-cells"
+
+patternProperties:
+ "^pmic@[0-9a-f]$":
+ description: |
+ PMIC properties, which are specific to the used SPMI PMIC device(s).
+ When used in combination with HiSilicon 6421v600, the properties
+ are documented at
+ drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "ok";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ spmi-channel = <2>;
+
+ pmic@0 {
+ reg = <0 0>;
+ /* pmic properties */
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index fb49e654a1db..406c2340f221 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8078,6 +8078,13 @@ F: drivers/crypto/hisilicon/sec2/sec_crypto.c
F: drivers/crypto/hisilicon/sec2/sec_crypto.h
F: drivers/crypto/hisilicon/sec2/sec_main.c
+HISILICON SPMI CONTROLLER DRIVER FOR HIKEY 970
+M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+F: drivers/spmi/hisi-spmi-controller.c
+
HISILICON STAGING DRIVERS FOR HIKEY 960/970
M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
L: devel@driverdev.osuosl.org
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index a53bad541f1a..2874b6c26028 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -11,6 +11,15 @@ menuconfig SPMI
if SPMI
+config SPMI_HISI3670
+ tristate "Hisilicon 3670 SPMI Controller"
+ select IRQ_DOMAIN_HIERARCHY
+ depends on HAS_IOMEM
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Hisilicon 3670
+ processors.
+
config SPMI_MSM_PMIC_ARB
tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)"
select IRQ_DOMAIN_HIERARCHY
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 55a94cadeffe..6e092e6f290c 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -4,4 +4,5 @@
#
obj-$(CONFIG_SPMI) += spmi.o
+obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c
new file mode 100644
index 000000000000..0d42bc65f39b
--- /dev/null
+++ b/drivers/spmi/hisi-spmi-controller.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+/*
+ * SPMI register addr
+ */
+#define SPMI_CHANNEL_OFFSET 0x0300
+#define SPMI_SLAVE_OFFSET 0x20
+
+#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
+
+#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
+#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
+#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
+#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
+
+#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
+
+#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
+#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
+#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
+#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
+
+#define SPMI_PER_DATAREG_BYTE 4
+/*
+ * SPMI cmd register
+ */
+#define SPMI_APB_SPMI_CMD_EN BIT(31)
+#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
+#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
+#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
+#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
+
+/* Command Opcodes */
+
+enum spmi_controller_cmd_op_code {
+ SPMI_CMD_REG_ZERO_WRITE = 0,
+ SPMI_CMD_REG_WRITE = 1,
+ SPMI_CMD_REG_READ = 2,
+ SPMI_CMD_EXT_REG_WRITE = 3,
+ SPMI_CMD_EXT_REG_READ = 4,
+ SPMI_CMD_EXT_REG_WRITE_L = 5,
+ SPMI_CMD_EXT_REG_READ_L = 6,
+ SPMI_CMD_REG_RESET = 7,
+ SPMI_CMD_REG_SLEEP = 8,
+ SPMI_CMD_REG_SHUTDOWN = 9,
+ SPMI_CMD_REG_WAKEUP = 10,
+};
+
+/*
+ * SPMI status register
+ */
+#define SPMI_APB_TRANS_DONE BIT(0)
+#define SPMI_APB_TRANS_FAIL BIT(2)
+
+/* Command register fields */
+#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
+
+/* Maximum number of support PMIC peripherals */
+#define SPMI_CONTROLLER_TIMEOUT_US 1000
+#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
+
+struct spmi_controller_dev {
+ struct spmi_controller *controller;
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+ u32 channel;
+};
+
+static int spmi_controller_wait_for_done(struct device *dev,
+ struct spmi_controller_dev *ctrl_dev,
+ void __iomem *base, u8 sid, u16 addr)
+{
+ u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
+ u32 status, offset;
+
+ offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
+ offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
+
+ do {
+ status = readl(base + offset);
+
+ if (status & SPMI_APB_TRANS_DONE) {
+ if (status & SPMI_APB_TRANS_FAIL) {
+ dev_err(dev, "%s: transaction failed (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+ dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
+ return 0;
+ }
+ udelay(1);
+ } while (timeout--);
+
+ dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
+ return -ETIMEDOUT;
+}
+
+static int spmi_read_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ unsigned long flags;
+ u8 *buf = __buf;
+ u32 cmd, data;
+ int rc;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ switch (opc) {
+ case SPMI_CMD_READ:
+ op_code = SPMI_CMD_REG_READ;
+ break;
+ case SPMI_CMD_EXT_READ:
+ op_code = SPMI_CMD_EXT_REG_READ;
+ break;
+ case SPMI_CMD_EXT_READL:
+ op_code = SPMI_CMD_EXT_REG_READ_L;
+ break;
+ default:
+ dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
+ ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
+
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, slave_id, slave_addr);
+ if (rc)
+ goto done;
+
+ for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
+ data = readl(spmi_controller->base + chnl_ofst +
+ SPMI_SLAVE_OFFSET * slave_id +
+ SPMI_APB_SPMI_RDATA0_BASE_ADDR +
+ i * SPMI_PER_DATAREG_BYTE);
+ data = be32_to_cpu((__be32 __force)data);
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(buf, &data, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+ }
+
+done:
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+ if (rc)
+ dev_err(&ctrl->dev,
+ "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
+ opc, slave_id, slave_addr, bc + 1);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
+ __func__, slave_id, slave_addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_write_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ const u8 *buf = __buf;
+ unsigned long flags;
+ u32 cmd, data;
+ int rc;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ switch (opc) {
+ case SPMI_CMD_WRITE:
+ op_code = SPMI_CMD_REG_WRITE;
+ break;
+ case SPMI_CMD_EXT_WRITE:
+ op_code = SPMI_CMD_EXT_REG_WRITE;
+ break;
+ case SPMI_CMD_EXT_WRITEL:
+ op_code = SPMI_CMD_EXT_REG_WRITE_L;
+ break;
+ default:
+ dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
+ ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
+
+ /* Write data to FIFOs */
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
+ data = 0;
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(&data, buf, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+
+ writel((u32 __force)cpu_to_be32(data),
+ spmi_controller->base + chnl_ofst +
+ SPMI_APB_SPMI_WDATA0_BASE_ADDR +
+ SPMI_PER_DATAREG_BYTE * i);
+ }
+
+ /* Start the transaction */
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, slave_id,
+ slave_addr);
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+
+ if (rc)
+ dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
+ opc, slave_id, slave_addr, bc);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
+ __func__, slave_id, slave_addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_controller_probe(struct platform_device *pdev)
+{
+ struct spmi_controller_dev *spmi_controller;
+ struct spmi_controller *ctrl;
+ struct resource *iores;
+ int ret;
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
+ if (!ctrl) {
+ dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
+ return -ENOMEM;
+ }
+ spmi_controller = spmi_controller_get_drvdata(ctrl);
+ spmi_controller->controller = ctrl;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ dev_err(&pdev->dev, "can not get resource!\n");
+ ret = -EINVAL;
+ goto err_put_controller;
+ }
+
+ spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
+ resource_size(iores));
+ if (!spmi_controller->base) {
+ dev_err(&pdev->dev, "can not remap base addr!\n");
+ ret = -EADDRNOTAVAIL;
+ goto err_put_controller;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
+ &spmi_controller->channel);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get channel\n");
+ ret = -ENODEV;
+ goto err_put_controller;
+ }
+
+ platform_set_drvdata(pdev, spmi_controller);
+ dev_set_drvdata(&ctrl->dev, spmi_controller);
+
+ spin_lock_init(&spmi_controller->lock);
+
+ ctrl->nr = spmi_controller->channel;
+ ctrl->dev.parent = pdev->dev.parent;
+ ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
+
+ /* Callbacks */
+ ctrl->read_cmd = spmi_read_cmd;
+ ctrl->write_cmd = spmi_write_cmd;
+
+ ret = spmi_controller_add(ctrl);
+ if (ret) {
+ dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret);
+ goto err_put_controller;
+ }
+
+ return 0;
+
+err_put_controller:
+ spmi_controller_put(ctrl);
+ return ret;
+}
+
+static int spmi_del_controller(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+
+ spmi_controller_remove(ctrl);
+ spmi_controller_put(ctrl);
+ return 0;
+}
+
+static const struct of_device_id spmi_controller_match_table[] = {
+ {
+ .compatible = "hisilicon,kirin970-spmi-controller",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
+
+static struct platform_driver spmi_controller_driver = {
+ .probe = spmi_controller_probe,
+ .remove = spmi_del_controller,
+ .driver = {
+ .name = "hisi_spmi_controller",
+ .of_match_table = spmi_controller_match_table,
+ },
+};
+
+static int __init spmi_controller_init(void)
+{
+ return platform_driver_register(&spmi_controller_driver);
+}
+postcore_initcall(spmi_controller_init);
+
+static void __exit spmi_controller_exit(void)
+{
+ platform_driver_unregister(&spmi_controller_driver);
+}
+module_exit(spmi_controller_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("1.0");
+MODULE_ALIAS("platform:spmi_controller");
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
index cc1fc58866c5..c2b16ebfd52c 100644
--- a/drivers/staging/hikey9xx/Kconfig
+++ b/drivers/staging/hikey9xx/Kconfig
@@ -1,16 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-# to be placed at drivers/spmi
-config SPMI_HISI3670
- tristate "Hisilicon 3670 SPMI Controller"
- select IRQ_DOMAIN_HIERARCHY
- depends on HAS_IOMEM
- depends on SPMI
- help
- If you say yes to this option, support will be included for the
- built-in SPMI PMIC Arbiter interface on Hisilicon 3670
- processors.
-
# to be placed at drivers/mfd
config MFD_HI6421_SPMI
tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
index 9371dcc3d35b..347880fd378f 100644
--- a/drivers/staging/hikey9xx/Makefile
+++ b/drivers/staging/hikey9xx/Makefile
@@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o
diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c
deleted file mode 100644
index 0d42bc65f39b..000000000000
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-/*
- * SPMI register addr
- */
-#define SPMI_CHANNEL_OFFSET 0x0300
-#define SPMI_SLAVE_OFFSET 0x20
-
-#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
-
-#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
-#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
-#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
-#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
-
-#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
-
-#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
-#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
-#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
-#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
-
-#define SPMI_PER_DATAREG_BYTE 4
-/*
- * SPMI cmd register
- */
-#define SPMI_APB_SPMI_CMD_EN BIT(31)
-#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
-#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
-#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
-#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
-
-/* Command Opcodes */
-
-enum spmi_controller_cmd_op_code {
- SPMI_CMD_REG_ZERO_WRITE = 0,
- SPMI_CMD_REG_WRITE = 1,
- SPMI_CMD_REG_READ = 2,
- SPMI_CMD_EXT_REG_WRITE = 3,
- SPMI_CMD_EXT_REG_READ = 4,
- SPMI_CMD_EXT_REG_WRITE_L = 5,
- SPMI_CMD_EXT_REG_READ_L = 6,
- SPMI_CMD_REG_RESET = 7,
- SPMI_CMD_REG_SLEEP = 8,
- SPMI_CMD_REG_SHUTDOWN = 9,
- SPMI_CMD_REG_WAKEUP = 10,
-};
-
-/*
- * SPMI status register
- */
-#define SPMI_APB_TRANS_DONE BIT(0)
-#define SPMI_APB_TRANS_FAIL BIT(2)
-
-/* Command register fields */
-#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
-
-/* Maximum number of support PMIC peripherals */
-#define SPMI_CONTROLLER_TIMEOUT_US 1000
-#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
-
-struct spmi_controller_dev {
- struct spmi_controller *controller;
- struct device *dev;
- void __iomem *base;
- spinlock_t lock;
- u32 channel;
-};
-
-static int spmi_controller_wait_for_done(struct device *dev,
- struct spmi_controller_dev *ctrl_dev,
- void __iomem *base, u8 sid, u16 addr)
-{
- u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
- u32 status, offset;
-
- offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
- offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
-
- do {
- status = readl(base + offset);
-
- if (status & SPMI_APB_TRANS_DONE) {
- if (status & SPMI_APB_TRANS_FAIL) {
- dev_err(dev, "%s: transaction failed (0x%x)\n",
- __func__, status);
- return -EIO;
- }
- dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
- return 0;
- }
- udelay(1);
- } while (timeout--);
-
- dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
- return -ETIMEDOUT;
-}
-
-static int spmi_read_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
-{
- struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
- unsigned long flags;
- u8 *buf = __buf;
- u32 cmd, data;
- int rc;
- u8 op_code, i;
-
- if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(&ctrl->dev,
- "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
- SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
- return -EINVAL;
- }
-
- switch (opc) {
- case SPMI_CMD_READ:
- op_code = SPMI_CMD_REG_READ;
- break;
- case SPMI_CMD_EXT_READ:
- op_code = SPMI_CMD_EXT_REG_READ;
- break;
- case SPMI_CMD_EXT_READL:
- op_code = SPMI_CMD_EXT_REG_READ_L;
- break;
- default:
- dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
- return -EINVAL;
- }
-
- cmd = SPMI_APB_SPMI_CMD_EN |
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
- ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
- ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
- ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
-
- spin_lock_irqsave(&spmi_controller->lock, flags);
-
- writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
- rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
- spmi_controller->base, slave_id, slave_addr);
- if (rc)
- goto done;
-
- for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
- data = readl(spmi_controller->base + chnl_ofst +
- SPMI_SLAVE_OFFSET * slave_id +
- SPMI_APB_SPMI_RDATA0_BASE_ADDR +
- i * SPMI_PER_DATAREG_BYTE);
- data = be32_to_cpu((__be32 __force)data);
- if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
- memcpy(buf, &data, sizeof(data));
- buf += sizeof(data);
- } else {
- memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
- buf += (bc % SPMI_PER_DATAREG_BYTE);
- }
- }
-
-done:
- spin_unlock_irqrestore(&spmi_controller->lock, flags);
- if (rc)
- dev_err(&ctrl->dev,
- "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
- opc, slave_id, slave_addr, bc + 1);
- else
- dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
- __func__, slave_id, slave_addr, (int)bc, __buf);
-
- return rc;
-}
-
-static int spmi_write_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
-{
- struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
- const u8 *buf = __buf;
- unsigned long flags;
- u32 cmd, data;
- int rc;
- u8 op_code, i;
-
- if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(&ctrl->dev,
- "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
- SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
- return -EINVAL;
- }
-
- switch (opc) {
- case SPMI_CMD_WRITE:
- op_code = SPMI_CMD_REG_WRITE;
- break;
- case SPMI_CMD_EXT_WRITE:
- op_code = SPMI_CMD_EXT_REG_WRITE;
- break;
- case SPMI_CMD_EXT_WRITEL:
- op_code = SPMI_CMD_EXT_REG_WRITE_L;
- break;
- default:
- dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
- return -EINVAL;
- }
-
- cmd = SPMI_APB_SPMI_CMD_EN |
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
- ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
- ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
- ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
-
- /* Write data to FIFOs */
- spin_lock_irqsave(&spmi_controller->lock, flags);
-
- for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
- data = 0;
- if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
- memcpy(&data, buf, sizeof(data));
- buf += sizeof(data);
- } else {
- memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
- buf += (bc % SPMI_PER_DATAREG_BYTE);
- }
-
- writel((u32 __force)cpu_to_be32(data),
- spmi_controller->base + chnl_ofst +
- SPMI_APB_SPMI_WDATA0_BASE_ADDR +
- SPMI_PER_DATAREG_BYTE * i);
- }
-
- /* Start the transaction */
- writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
- rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
- spmi_controller->base, slave_id,
- slave_addr);
- spin_unlock_irqrestore(&spmi_controller->lock, flags);
-
- if (rc)
- dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
- opc, slave_id, slave_addr, bc);
- else
- dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
- __func__, slave_id, slave_addr, (int)bc, __buf);
-
- return rc;
-}
-
-static int spmi_controller_probe(struct platform_device *pdev)
-{
- struct spmi_controller_dev *spmi_controller;
- struct spmi_controller *ctrl;
- struct resource *iores;
- int ret;
-
- ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
- if (!ctrl) {
- dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
- return -ENOMEM;
- }
- spmi_controller = spmi_controller_get_drvdata(ctrl);
- spmi_controller->controller = ctrl;
-
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iores) {
- dev_err(&pdev->dev, "can not get resource!\n");
- ret = -EINVAL;
- goto err_put_controller;
- }
-
- spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
- resource_size(iores));
- if (!spmi_controller->base) {
- dev_err(&pdev->dev, "can not remap base addr!\n");
- ret = -EADDRNOTAVAIL;
- goto err_put_controller;
- }
-
- ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
- &spmi_controller->channel);
- if (ret) {
- dev_err(&pdev->dev, "can not get channel\n");
- ret = -ENODEV;
- goto err_put_controller;
- }
-
- platform_set_drvdata(pdev, spmi_controller);
- dev_set_drvdata(&ctrl->dev, spmi_controller);
-
- spin_lock_init(&spmi_controller->lock);
-
- ctrl->nr = spmi_controller->channel;
- ctrl->dev.parent = pdev->dev.parent;
- ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
-
- /* Callbacks */
- ctrl->read_cmd = spmi_read_cmd;
- ctrl->write_cmd = spmi_write_cmd;
-
- ret = spmi_controller_add(ctrl);
- if (ret) {
- dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret);
- goto err_put_controller;
- }
-
- return 0;
-
-err_put_controller:
- spmi_controller_put(ctrl);
- return ret;
-}
-
-static int spmi_del_controller(struct platform_device *pdev)
-{
- struct spmi_controller *ctrl = platform_get_drvdata(pdev);
-
- spmi_controller_remove(ctrl);
- spmi_controller_put(ctrl);
- return 0;
-}
-
-static const struct of_device_id spmi_controller_match_table[] = {
- {
- .compatible = "hisilicon,kirin970-spmi-controller",
- },
- {}
-};
-MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
-
-static struct platform_driver spmi_controller_driver = {
- .probe = spmi_controller_probe,
- .remove = spmi_del_controller,
- .driver = {
- .name = "hisi_spmi_controller",
- .of_match_table = spmi_controller_match_table,
- },
-};
-
-static int __init spmi_controller_init(void)
-{
- return platform_driver_register(&spmi_controller_driver);
-}
-postcore_initcall(spmi_controller_init);
-
-static void __exit spmi_controller_exit(void)
-{
- platform_driver_unregister(&spmi_controller_driver);
-}
-module_exit(spmi_controller_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("1.0");
-MODULE_ALIAS("platform:spmi_controller");
diff --git a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml b/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
deleted file mode 100644
index 21f68a9c2df1..000000000000
--- a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
+++ /dev/null
@@ -1,75 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon SPMI controller
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
- The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
- It is a MIPI System Power Management (SPMI) controller.
-
- The PMIC part is provided by
- drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
-
-properties:
- $nodename:
- pattern: "spmi@[0-9a-f]"
-
- compatible:
- const: hisilicon,kirin970-spmi-controller
-
- reg:
- maxItems: 1
-
- "#address-cells":
- const: 2
-
- "#size-cells":
- const: 0
-
- spmi-channel:
- description: |
- number of the Kirin 970 SPMI channel where the SPMI devices are connected.
-
-required:
- - compatible
- - reg
- - spmi-channel
- - "#address-cells"
- - "#size-cells"
-
-patternProperties:
- "^pmic@[0-9a-f]$":
- description: |
- PMIC properties, which are specific to the used SPMI PMIC device(s).
- When used in combination with HiSilicon 6421v600, the properties
- are documented at
- drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
-
-additionalProperties: false
-
-examples:
- - |
- bus {
- #address-cells = <2>;
- #size-cells = <2>;
-
- spmi: spmi@fff24000 {
- compatible = "hisilicon,kirin970-spmi-controller";
- #address-cells = <2>;
- #size-cells = <0>;
- status = "ok";
- reg = <0x0 0xfff24000 0x0 0x1000>;
- spmi-channel = <2>;
-
- pmic@0 {
- reg = <0 0>;
- /* pmic properties */
- };
- };
- };
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 12/14] mfd: hi6421-spmi-pmic: move driver from staging
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (11 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, devicetree, Mayulong, Mauro Carvalho Chehab,
Greg Kroah-Hartman, linux-kernel, Rob Herring, David Gow,
Lee Jones
This driver is ready for mainstream. So, move it out of staging.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 135 ++++++++
MAINTAINERS | 7 +
drivers/mfd/Kconfig | 15 +
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 296 ++++++++++++++++++
drivers/staging/hikey9xx/Kconfig | 17 -
drivers/staging/hikey9xx/Makefile | 1 -
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 296 ------------------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 135 --------
9 files changed, 454 insertions(+), 449 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..3b23ad56b31a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+ HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+ (SPMI) bus. It provides interrupts and power supply.
+
+ The GPIO and interrupt settings are represented as part of the top-level PMIC
+ node.
+
+ The SPMI controller part is provided by
+ drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml.
+
+properties:
+ $nodename:
+ pattern: "pmic@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,hi6421v600-spmi
+
+ reg:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller:
+ description:
+ Identify that the PMIC is capable of behaving as an interrupt controller.
+
+ gpios:
+ maxItems: 1
+
+ regulators:
+ type: object
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ '^ldo[0-9]+@[0-9a-f]$':
+ type: object
+
+ $ref: "/schemas/regulator/regulator.yaml#"
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ /* pmic properties */
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi";
+ reg = <0 0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9: LDO9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15: LDO15 {
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16: LDO16 {
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17: LDO17 {
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33: LDO33 {
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34: LDO34 {
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 406c2340f221..241f11b7d48a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8085,6 +8085,13 @@ S: Maintained
F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
F: drivers/spmi/hisi-spmi-controller.c
+HISILICON SPMI PMIC DRIVER FOR HIKEY 6421v600
+M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+F: drivers/mfd/hi6421-spmi-pmic.c
+
HISILICON STAGING DRIVERS FOR HIKEY 960/970
M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
L: devel@driverdev.osuosl.org
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bdfce7b15621..d80ccbf50235 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -509,6 +509,21 @@ config MFD_HI6421_PMIC
menus in order to enable them.
We communicate with the Hi6421 via memory-mapped I/O.
+config MFD_HI6421_SPMI
+ tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
+ depends on OF
+ depends on SPMI
+ select MFD_CORE
+ help
+ Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
+ multi-functions, such as regulators, RTC, codec, Coulomb counter,
+ etc.
+
+ This driver includes core APIs _only_. You have to select
+ individual components like voltage regulators under corresponding
+ menus in order to enable them.
+ We communicate with the Hi6421v600 via a SPMI bus.
+
config MFD_HI655X_PMIC
tristate "HiSilicon Hi655X series PMU/Codec IC"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 14fdb188af02..b64e89ade44b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -234,6 +234,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_IQS62X) += iqs62x.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
diff --git a/drivers/mfd/hi6421-spmi-pmic.c b/drivers/mfd/hi6421-spmi-pmic.c
new file mode 100644
index 000000000000..e91ff07b5af8
--- /dev/null
+++ b/drivers/mfd/hi6421-spmi-pmic.c
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+enum hi6421_spmi_pmic_irq_list {
+ OTMP = 0,
+ VBUS_CONNECT,
+ VBUS_DISCONNECT,
+ ALARMON_R,
+ HOLD_6S,
+ HOLD_1S,
+ POWERKEY_UP,
+ POWERKEY_DOWN,
+ OCP_SCP_R,
+ COUL_R,
+ SIM0_HPD_R,
+ SIM0_HPD_F,
+ SIM1_HPD_R,
+ SIM1_HPD_F,
+ PMIC_IRQ_LIST_MAX,
+};
+
+#define HISI_IRQ_ARRAY 2
+#define HISI_IRQ_NUM (HISI_IRQ_ARRAY * 8)
+
+#define HISI_IRQ_KEY_NUM 0
+
+#define HISI_BITS 8
+#define HISI_IRQ_KEY_VALUE (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
+#define HISI_MASK GENMASK(HISI_BITS - 1, 0)
+
+/*
+ * The IRQs are mapped as:
+ *
+ * ====================== ============= ============ =====
+ * IRQ MASK REGISTER IRQ REGISTER BIT
+ * ====================== ============= ============ =====
+ * OTMP 0x0202 0x212 bit 0
+ * VBUS_CONNECT 0x0202 0x212 bit 1
+ * VBUS_DISCONNECT 0x0202 0x212 bit 2
+ * ALARMON_R 0x0202 0x212 bit 3
+ * HOLD_6S 0x0202 0x212 bit 4
+ * HOLD_1S 0x0202 0x212 bit 5
+ * POWERKEY_UP 0x0202 0x212 bit 6
+ * POWERKEY_DOWN 0x0202 0x212 bit 7
+ *
+ * OCP_SCP_R 0x0203 0x213 bit 0
+ * COUL_R 0x0203 0x213 bit 1
+ * SIM0_HPD_R 0x0203 0x213 bit 2
+ * SIM0_HPD_F 0x0203 0x213 bit 3
+ * SIM1_HPD_R 0x0203 0x213 bit 4
+ * SIM1_HPD_F 0x0203 0x213 bit 5
+ * ====================== ============= ============ =====
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
+#define SOC_PMIC_IRQ0_ADDR 0x0212
+
+#define IRQ_MASK_REGISTER(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \ irqd_to_hwirq(irq_data) >> 3)
+#define IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & 0x07)
+
+static const struct mfd_cell hi6421v600_devs[] = {
+ { .name = "hi6421v600-regulator", },
+};
+
+static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
+{
+ struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
+ unsigned long pending;
+ unsigned int in;
+ int i, offset;
+
+ for (i = 0; i < HISI_IRQ_ARRAY; i++) {
+ regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
+ pending = HISI_MASK & in;
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, pending);
+
+ if (i == HISI_IRQ_KEY_NUM &&
+ (pending & HISI_IRQ_KEY_VALUE) == HISI_IRQ_KEY_VALUE) {
+ generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
+ generic_handle_irq(ddata->irqs[POWERKEY_UP]);
+ pending &= (~HISI_IRQ_KEY_VALUE);
+ }
+
+ if (!pending)
+ continue;
+
+ for_each_set_bit(offset, &pending, HISI_BITS)
+ generic_handle_irq(ddata->irqs[offset + i * HISI_BITS]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void hi6421_spmi_irq_mask(struct irq_data *d)
+{
+ struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
+ unsigned long flags;
+ unsigned int data;
+ u32 offset;
+
+ offset = IRQ_MASK_REGISTER(d);
+
+ spin_lock_irqsave(&ddata->lock, flags);
+
+ regmap_read(ddata->regmap, offset, &data);
+ data |= IRQ_MASK_BIT(d);
+ regmap_write(ddata->regmap, offset, data);
+
+ spin_unlock_irqrestore(&ddata->lock, flags);
+}
+
+static void hi6421_spmi_irq_unmask(struct irq_data *d)
+{
+ struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
+ u32 data, offset;
+ unsigned long flags;
+
+ offset = (irqd_to_hwirq(d) >> 3);
+ offset += SOC_PMIC_IRQ_MASK_0_ADDR;
+
+ spin_lock_irqsave(&ddata->lock, flags);
+
+ regmap_read(ddata->regmap, offset, &data);
+ data &= ~(1 << (irqd_to_hwirq(d) & 0x07));
+ regmap_write(ddata->regmap, offset, data);
+
+ spin_unlock_irqrestore(&ddata->lock, flags);
+}
+
+static struct irq_chip hi6421_spmi_pmu_irqchip = {
+ .name = "hisi-irq",
+ .irq_mask = hi6421_spmi_irq_mask,
+ .irq_unmask = hi6421_spmi_irq_unmask,
+ .irq_disable = hi6421_spmi_irq_mask,
+ .irq_enable = hi6421_spmi_irq_unmask,
+};
+
+static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct hi6421_spmi_pmic *ddata = d->host_data;
+
+ irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
+ handle_simple_irq, "hisi");
+ irq_set_chip_data(virq, ddata);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static const struct irq_domain_ops hi6421_spmi_domain_ops = {
+ .map = hi6421_spmi_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
+{
+ int i;
+ unsigned int pending;
+
+ for (i = 0; i < HISI_IRQ_ARRAY; i++)
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+ HISI_MASK);
+
+ for (i = 0; i < HISI_IRQ_ARRAY; i++) {
+ regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
+ HISI_MASK);
+ }
+}
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 16,
+ .val_bits = HISI_BITS,
+ .max_register = 0xffff,
+ .fast_io = true
+};
+
+static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct hi6421_spmi_pmic *ddata;
+ unsigned int virq;
+ int ret, i;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
+ if (IS_ERR(ddata->regmap))
+ return PTR_ERR(ddata->regmap);
+
+ spin_lock_init(&ddata->lock);
+
+ ddata->dev = dev;
+
+ ddata->gpio = of_get_gpio(np, 0);
+ if (ddata->gpio < 0)
+ return ddata->gpio;
+
+ if (!gpio_is_valid(ddata->gpio))
+ return -EINVAL;
+
+ ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
+ if (ret < 0) {
+ dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
+ return ret;
+ }
+
+ ddata->irq = gpio_to_irq(ddata->gpio);
+
+ hi6421_spmi_pmic_irq_init(ddata);
+
+ ddata->irqs = devm_kzalloc(dev, HISI_IRQ_NUM * sizeof(int), GFP_KERNEL);
+ if (!ddata->irqs)
+ return -ENOMEM;
+
+ ddata->domain = irq_domain_add_simple(np, HISI_IRQ_NUM, 0,
+ &hi6421_spmi_domain_ops, ddata);
+ if (!ddata->domain) {
+ dev_err(dev, "Failed to create IRQ domain\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < HISI_IRQ_NUM; i++) {
+ virq = irq_create_mapping(ddata->domain, i);
+ if (!virq) {
+ dev_err(dev, "Failed to map H/W IRQ\n");
+ return -ENOSPC;
+ }
+ ddata->irqs[i] = virq;
+ }
+
+ ret = request_threaded_irq(ddata->irq, hi6421_spmi_irq_handler, NULL,
+ IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
+ "pmic", ddata);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
+ ret);
+ return ret;
+ }
+
+ dev_set_drvdata(&pdev->dev, ddata);
+
+ ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+ hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
+ NULL, 0, NULL);
+ if (ret < 0)
+ dev_err(dev, "Failed to add child devices: %d\n", ret);
+
+ return ret;
+}
+
+static void hi6421_spmi_pmic_remove(struct spmi_device *pdev)
+{
+ struct hi6421_spmi_pmic *ddata = dev_get_drvdata(&pdev->dev);
+
+ free_irq(ddata->irq, ddata);
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+ { .compatible = "hisilicon,hi6421-spmi" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver hi6421_spmi_pmic_driver = {
+ .driver = {
+ .name = "hi6421-spmi-pmic",
+ .of_match_table = pmic_spmi_id_table,
+ },
+ .probe = hi6421_spmi_pmic_probe,
+ .remove = hi6421_spmi_pmic_remove,
+};
+module_spmi_driver(hi6421_spmi_pmic_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
index c2b16ebfd52c..1afb8648a2c4 100644
--- a/drivers/staging/hikey9xx/Kconfig
+++ b/drivers/staging/hikey9xx/Kconfig
@@ -1,22 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-# to be placed at drivers/mfd
-config MFD_HI6421_SPMI
- tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
- depends on HAS_IOMEM
- depends on OF
- depends on SPMI
- select MFD_CORE
- help
- Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
- multi-functions, such as regulators, RTC, codec, Coulomb counter,
- etc.
-
- This driver includes core APIs _only_. You have to select
- individual components like voltage regulators under corresponding
- menus in order to enable them.
- We communicate with the Hi6421v600 via a SPMI bus.
-
# to be placed at drivers/regulator
config REGULATOR_HI6421V600
tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
index 347880fd378f..4d63184e6086 100644
--- a/drivers/staging/hikey9xx/Makefile
+++ b/drivers/staging/hikey9xx/Makefile
@@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
deleted file mode 100644
index e91ff07b5af8..000000000000
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ /dev/null
@@ -1,296 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device driver for regulators in HISI PMIC IC
- *
- * Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
- */
-
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
-#include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-enum hi6421_spmi_pmic_irq_list {
- OTMP = 0,
- VBUS_CONNECT,
- VBUS_DISCONNECT,
- ALARMON_R,
- HOLD_6S,
- HOLD_1S,
- POWERKEY_UP,
- POWERKEY_DOWN,
- OCP_SCP_R,
- COUL_R,
- SIM0_HPD_R,
- SIM0_HPD_F,
- SIM1_HPD_R,
- SIM1_HPD_F,
- PMIC_IRQ_LIST_MAX,
-};
-
-#define HISI_IRQ_ARRAY 2
-#define HISI_IRQ_NUM (HISI_IRQ_ARRAY * 8)
-
-#define HISI_IRQ_KEY_NUM 0
-
-#define HISI_BITS 8
-#define HISI_IRQ_KEY_VALUE (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-#define HISI_MASK GENMASK(HISI_BITS - 1, 0)
-
-/*
- * The IRQs are mapped as:
- *
- * ====================== ============= ============ =====
- * IRQ MASK REGISTER IRQ REGISTER BIT
- * ====================== ============= ============ =====
- * OTMP 0x0202 0x212 bit 0
- * VBUS_CONNECT 0x0202 0x212 bit 1
- * VBUS_DISCONNECT 0x0202 0x212 bit 2
- * ALARMON_R 0x0202 0x212 bit 3
- * HOLD_6S 0x0202 0x212 bit 4
- * HOLD_1S 0x0202 0x212 bit 5
- * POWERKEY_UP 0x0202 0x212 bit 6
- * POWERKEY_DOWN 0x0202 0x212 bit 7
- *
- * OCP_SCP_R 0x0203 0x213 bit 0
- * COUL_R 0x0203 0x213 bit 1
- * SIM0_HPD_R 0x0203 0x213 bit 2
- * SIM0_HPD_F 0x0203 0x213 bit 3
- * SIM1_HPD_R 0x0203 0x213 bit 4
- * SIM1_HPD_F 0x0203 0x213 bit 5
- * ====================== ============= ============ =====
- */
-#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
-#define SOC_PMIC_IRQ0_ADDR 0x0212
-
-#define IRQ_MASK_REGISTER(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \ irqd_to_hwirq(irq_data) >> 3)
-#define IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & 0x07)
-
-static const struct mfd_cell hi6421v600_devs[] = {
- { .name = "hi6421v600-regulator", },
-};
-
-static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
-{
- struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
- unsigned long pending;
- unsigned int in;
- int i, offset;
-
- for (i = 0; i < HISI_IRQ_ARRAY; i++) {
- regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
- pending = HISI_MASK & in;
- regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, pending);
-
- if (i == HISI_IRQ_KEY_NUM &&
- (pending & HISI_IRQ_KEY_VALUE) == HISI_IRQ_KEY_VALUE) {
- generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
- generic_handle_irq(ddata->irqs[POWERKEY_UP]);
- pending &= (~HISI_IRQ_KEY_VALUE);
- }
-
- if (!pending)
- continue;
-
- for_each_set_bit(offset, &pending, HISI_BITS)
- generic_handle_irq(ddata->irqs[offset + i * HISI_BITS]);
- }
-
- return IRQ_HANDLED;
-}
-
-static void hi6421_spmi_irq_mask(struct irq_data *d)
-{
- struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
- unsigned long flags;
- unsigned int data;
- u32 offset;
-
- offset = IRQ_MASK_REGISTER(d);
-
- spin_lock_irqsave(&ddata->lock, flags);
-
- regmap_read(ddata->regmap, offset, &data);
- data |= IRQ_MASK_BIT(d);
- regmap_write(ddata->regmap, offset, data);
-
- spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static void hi6421_spmi_irq_unmask(struct irq_data *d)
-{
- struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
- u32 data, offset;
- unsigned long flags;
-
- offset = (irqd_to_hwirq(d) >> 3);
- offset += SOC_PMIC_IRQ_MASK_0_ADDR;
-
- spin_lock_irqsave(&ddata->lock, flags);
-
- regmap_read(ddata->regmap, offset, &data);
- data &= ~(1 << (irqd_to_hwirq(d) & 0x07));
- regmap_write(ddata->regmap, offset, data);
-
- spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static struct irq_chip hi6421_spmi_pmu_irqchip = {
- .name = "hisi-irq",
- .irq_mask = hi6421_spmi_irq_mask,
- .irq_unmask = hi6421_spmi_irq_unmask,
- .irq_disable = hi6421_spmi_irq_mask,
- .irq_enable = hi6421_spmi_irq_unmask,
-};
-
-static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct hi6421_spmi_pmic *ddata = d->host_data;
-
- irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
- handle_simple_irq, "hisi");
- irq_set_chip_data(virq, ddata);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
- return 0;
-}
-
-static const struct irq_domain_ops hi6421_spmi_domain_ops = {
- .map = hi6421_spmi_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
-{
- int i;
- unsigned int pending;
-
- for (i = 0; i < HISI_IRQ_ARRAY; i++)
- regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
- HISI_MASK);
-
- for (i = 0; i < HISI_IRQ_ARRAY; i++) {
- regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
- regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
- HISI_MASK);
- }
-}
-
-static const struct regmap_config regmap_config = {
- .reg_bits = 16,
- .val_bits = HISI_BITS,
- .max_register = 0xffff,
- .fast_io = true
-};
-
-static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct hi6421_spmi_pmic *ddata;
- unsigned int virq;
- int ret, i;
-
- ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
- if (!ddata)
- return -ENOMEM;
-
- ddata->regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
- if (IS_ERR(ddata->regmap))
- return PTR_ERR(ddata->regmap);
-
- spin_lock_init(&ddata->lock);
-
- ddata->dev = dev;
-
- ddata->gpio = of_get_gpio(np, 0);
- if (ddata->gpio < 0)
- return ddata->gpio;
-
- if (!gpio_is_valid(ddata->gpio))
- return -EINVAL;
-
- ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
- if (ret < 0) {
- dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
- return ret;
- }
-
- ddata->irq = gpio_to_irq(ddata->gpio);
-
- hi6421_spmi_pmic_irq_init(ddata);
-
- ddata->irqs = devm_kzalloc(dev, HISI_IRQ_NUM * sizeof(int), GFP_KERNEL);
- if (!ddata->irqs)
- return -ENOMEM;
-
- ddata->domain = irq_domain_add_simple(np, HISI_IRQ_NUM, 0,
- &hi6421_spmi_domain_ops, ddata);
- if (!ddata->domain) {
- dev_err(dev, "Failed to create IRQ domain\n");
- return -ENODEV;
- }
-
- for (i = 0; i < HISI_IRQ_NUM; i++) {
- virq = irq_create_mapping(ddata->domain, i);
- if (!virq) {
- dev_err(dev, "Failed to map H/W IRQ\n");
- return -ENOSPC;
- }
- ddata->irqs[i] = virq;
- }
-
- ret = request_threaded_irq(ddata->irq, hi6421_spmi_irq_handler, NULL,
- IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
- "pmic", ddata);
- if (ret < 0) {
- dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
- ret);
- return ret;
- }
-
- dev_set_drvdata(&pdev->dev, ddata);
-
- ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
- hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
- NULL, 0, NULL);
- if (ret < 0)
- dev_err(dev, "Failed to add child devices: %d\n", ret);
-
- return ret;
-}
-
-static void hi6421_spmi_pmic_remove(struct spmi_device *pdev)
-{
- struct hi6421_spmi_pmic *ddata = dev_get_drvdata(&pdev->dev);
-
- free_irq(ddata->irq, ddata);
-}
-
-static const struct of_device_id pmic_spmi_id_table[] = {
- { .compatible = "hisilicon,hi6421-spmi" },
- { }
-};
-MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
-
-static struct spmi_driver hi6421_spmi_pmic_driver = {
- .driver = {
- .name = "hi6421-spmi-pmic",
- .of_match_table = pmic_spmi_id_table,
- },
- .probe = hi6421_spmi_pmic_probe,
- .remove = hi6421_spmi_pmic_remove,
-};
-module_spmi_driver(hi6421_spmi_pmic_driver);
-
-MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
deleted file mode 100644
index 3b23ad56b31a..000000000000
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ /dev/null
@@ -1,135 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon 6421v600 SPMI PMIC
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
- HiSilicon 6421v600 should be connected inside a MIPI System Power Management
- (SPMI) bus. It provides interrupts and power supply.
-
- The GPIO and interrupt settings are represented as part of the top-level PMIC
- node.
-
- The SPMI controller part is provided by
- drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml.
-
-properties:
- $nodename:
- pattern: "pmic@[0-9a-f]"
-
- compatible:
- const: hisilicon,hi6421v600-spmi
-
- reg:
- maxItems: 1
-
- '#interrupt-cells':
- const: 2
-
- interrupt-controller:
- description:
- Identify that the PMIC is capable of behaving as an interrupt controller.
-
- gpios:
- maxItems: 1
-
- regulators:
- type: object
-
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- patternProperties:
- '^ldo[0-9]+@[0-9a-f]$':
- type: object
-
- $ref: "/schemas/regulator/regulator.yaml#"
-
-required:
- - compatible
- - reg
- - regulators
-
-additionalProperties: false
-
-examples:
- - |
- /* pmic properties */
-
- pmic: pmic@0 {
- compatible = "hisilicon,hi6421-spmi";
- reg = <0 0>;
-
- #interrupt-cells = <2>;
- interrupt-controller;
- gpios = <&gpio28 0 0>;
-
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ldo3: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2000000>;
- regulator-boot-on;
- };
-
- ldo4: LDO4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <1900000>;
- regulator-boot-on;
- };
-
- ldo9: LDO9 {
- regulator-name = "ldo9";
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo15: LDO15 {
- regulator-name = "ldo15";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo16: LDO16 {
- regulator-name = "ldo16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- };
-
- ldo17: LDO17 {
- regulator-name = "ldo17";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo33: LDO33 {
- regulator-name = "ldo33";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo34: LDO34 {
- regulator-name = "ldo34";
- regulator-min-microvolt = <2600000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 13/14] regulator: hi6421v600-regulator: move it from staging
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (12 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devel, Mayulong, Mauro Carvalho Chehab, Greg Kroah-Hartman,
Liam Girdwood, linux-kernel, Mark Brown, David Gow
This driver is ready for mainstream. Move it out of staging.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
MAINTAINERS | 7 +-
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421v600-regulator.c | 299 ++++++++++++++++++
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/hikey9xx/Kconfig | 11 -
drivers/staging/hikey9xx/Makefile | 3 -
drivers/staging/hikey9xx/TODO | 5 -
.../staging/hikey9xx/hi6421v600-regulator.c | 299 ------------------
10 files changed, 309 insertions(+), 327 deletions(-)
create mode 100644 drivers/regulator/hi6421v600-regulator.c
delete mode 100644 drivers/staging/hikey9xx/Kconfig
delete mode 100644 drivers/staging/hikey9xx/Makefile
delete mode 100644 drivers/staging/hikey9xx/TODO
delete mode 100644 drivers/staging/hikey9xx/hi6421v600-regulator.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 241f11b7d48a..5c5ad946c5d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8091,12 +8091,7 @@ L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
F: drivers/mfd/hi6421-spmi-pmic.c
-
-HISILICON STAGING DRIVERS FOR HIKEY 960/970
-M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-L: devel@driverdev.osuosl.org
-S: Maintained
-F: drivers/staging/hikey9xx/
+F: drivers/regulator/hi6421v600-regulator.c
HISILICON TRUE RANDOM NUMBER GENERATOR V2 SUPPORT
M: Zaibo Xu <xuzaibo@huawei.com>
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5abdd29fb9f3..088474391da8 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -423,6 +423,14 @@ config REGULATOR_HI655X
This driver provides support for the voltage regulators of the
Hisilicon Hi655x PMIC device.
+config REGULATOR_HI6421V600
+ tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
+ depends on MFD_HI6421_SPMI && OF
+ help
+ This driver provides support for the voltage regulators on
+ HiSilicon Hi6421v600 PMU / Codec IC.
+ This is used on Kirin 3670 boards, like HiKey 970.
+
config REGULATOR_ISL9305
tristate "Intersil ISL9305 regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 680e539f6579..77e519d2bc68 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_REGULATOR_FAN53880) += fan53880.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
+obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
new file mode 100644
index 000000000000..c801bb840962
--- /dev/null
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Device driver for regulators in Hisi IC
+//
+// Copyright (c) 2013 Linaro Ltd.
+// Copyright (c) 2011 Hisilicon.
+// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+//
+// Guodong Xu <guodong.xu@linaro.org>
+
+#include <linux/delay.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/spmi.h>
+
+struct hi6421_spmi_reg_info {
+ struct regulator_desc desc;
+ struct hi6421_spmi_pmic *pmic;
+ u8 eco_mode_mask;
+ u32 eco_uA;
+
+ /* Serialize regulator enable logic */
+ struct mutex enable_mutex;
+};
+
+static const unsigned int ldo3_voltages[] = {
+ 1500000, 1550000, 1600000, 1650000,
+ 1700000, 1725000, 1750000, 1775000,
+ 1800000, 1825000, 1850000, 1875000,
+ 1900000, 1925000, 1950000, 2000000
+};
+
+static const unsigned int ldo4_voltages[] = {
+ 1725000, 1750000, 1775000, 1800000,
+ 1825000, 1850000, 1875000, 1900000
+};
+
+static const unsigned int ldo9_voltages[] = {
+ 1750000, 1800000, 1825000, 2800000,
+ 2850000, 2950000, 3000000, 3300000
+};
+
+static const unsigned int ldo15_voltages[] = {
+ 1800000, 1850000, 2400000, 2600000,
+ 2700000, 2850000, 2950000, 3000000
+};
+
+static const unsigned int ldo17_voltages[] = {
+ 2500000, 2600000, 2700000, 2800000,
+ 3000000, 3100000, 3200000, 3300000
+};
+
+static const unsigned int ldo34_voltages[] = {
+ 2600000, 2700000, 2800000, 2900000,
+ 3000000, 3100000, 3200000, 3300000
+};
+
+/**
+ * HI6421V600_LDO() - specify a LDO power line
+ * @_id: LDO id name string
+ * @vtable: voltage table
+ * @ereg: enable register
+ * @emask: enable mask
+ * @vreg: voltage select register
+ * @odelay: off/on delay time in uS
+ * @etime: enable time in uS
+ * @ecomask: eco mode mask
+ * @ecoamp: eco mode load uppler limit in uA
+ */
+#define HI6421V600_LDO(_id, vtable, ereg, emask, vreg, \
+ odelay, etime, ecomask, ecoamp) \
+ [HI6421V600_##_id] = { \
+ .desc = { \
+ .name = #_id, \
+ .of_match = of_match_ptr(#_id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &hi6421_spmi_ldo_rops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI6421V600_##_id, \
+ .owner = THIS_MODULE, \
+ .volt_table = vtable, \
+ .n_voltages = ARRAY_SIZE(vtable), \
+ .vsel_mask = (1 << (ARRAY_SIZE(vtable) - 1)) - 1, \
+ .vsel_reg = vreg, \
+ .enable_reg = ereg, \
+ .enable_mask = emask, \
+ .enable_time = etime, \
+ .ramp_delay = etime, \
+ .off_on_delay = odelay, \
+ }, \
+ .eco_mode_mask = ecomask, \
+ .eco_uA = ecoamp, \
+ }
+
+static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
+{
+ struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+ int ret;
+
+ /* cannot enable more than one regulator at one time */
+ mutex_lock(&sreg->enable_mutex);
+
+ ret = regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
+
+ /* Avoid powering up multiple devices at the same time */
+ usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
+
+ mutex_unlock(&sreg->enable_mutex);
+
+ return ret;
+}
+
+static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
+{
+ struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+
+ return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, 0);
+}
+
+static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+ u32 reg_val;
+
+ regmap_read(pmic->regmap, rdev->desc->enable_reg, ®_val);
+
+ if (reg_val & sreg->eco_mode_mask)
+ return REGULATOR_MODE_IDLE;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
+ struct hi6421_spmi_pmic *pmic = sreg->pmic;
+ u32 val;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = 0;
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
+ sreg->eco_mode_mask, val);
+}
+
+static unsigned int
+hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
+ int input_uV, int output_uV,
+ int load_uA)
+{
+ struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
+
+ if (!sreg->eco_uA || ((unsigned int)load_uA > sreg->eco_uA))
+ return REGULATOR_MODE_NORMAL;
+
+ return REGULATOR_MODE_IDLE;
+}
+
+static const struct regulator_ops hi6421_spmi_ldo_rops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = hi6421_spmi_regulator_enable,
+ .disable = hi6421_spmi_regulator_disable,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_mode = hi6421_spmi_regulator_get_mode,
+ .set_mode = hi6421_spmi_regulator_set_mode,
+ .get_optimum_mode = hi6421_spmi_regulator_get_optimum_mode,
+};
+
+/* HI6421v600 regulators with known registers */
+enum hi6421_spmi_regulator_id {
+ HI6421V600_LDO3,
+ HI6421V600_LDO4,
+ HI6421V600_LDO9,
+ HI6421V600_LDO15,
+ HI6421V600_LDO16,
+ HI6421V600_LDO17,
+ HI6421V600_LDO33,
+ HI6421V600_LDO34,
+};
+
+static struct hi6421_spmi_reg_info regulator_info[] = {
+ HI6421V600_LDO(LDO3, ldo3_voltages,
+ 0x16, 0x01, 0x51,
+ 20000, 120,
+ 0, 0),
+ HI6421V600_LDO(LDO4, ldo4_voltages,
+ 0x17, 0x01, 0x52,
+ 20000, 120,
+ 0x10, 10000),
+ HI6421V600_LDO(LDO9, ldo9_voltages,
+ 0x1c, 0x01, 0x57,
+ 20000, 360,
+ 0x10, 10000),
+ HI6421V600_LDO(LDO15, ldo15_voltages,
+ 0x21, 0x01, 0x5c,
+ 20000, 360,
+ 0x10, 10000),
+ HI6421V600_LDO(LDO16, ldo15_voltages,
+ 0x22, 0x01, 0x5d,
+ 20000, 360,
+ 0x10, 10000),
+ HI6421V600_LDO(LDO17, ldo17_voltages,
+ 0x23, 0x01, 0x5e,
+ 20000, 120,
+ 0x10, 10000),
+ HI6421V600_LDO(LDO33, ldo17_voltages,
+ 0x32, 0x01, 0x6d,
+ 20000, 120,
+ 0, 0),
+ HI6421V600_LDO(LDO34, ldo34_voltages,
+ 0x33, 0x01, 0x6e,
+ 20000, 120,
+ 0, 0),
+};
+
+static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
+{
+ struct device *pmic_dev = pdev->dev.parent;
+ struct regulator_config config = { };
+ struct hi6421_spmi_reg_info *sreg;
+ struct hi6421_spmi_reg_info *info;
+ struct device *dev = &pdev->dev;
+ struct hi6421_spmi_pmic *pmic;
+ struct regulator_dev *rdev;
+ int i;
+
+ /*
+ * This driver is meant to be called by hi6421-spmi-core,
+ * which should first set drvdata. If this doesn't happen, hit
+ * a warn on and return.
+ */
+ pmic = dev_get_drvdata(pmic_dev);
+ if (WARN_ON(!pmic))
+ return -ENODEV;
+
+ sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
+ if (!sreg)
+ return -ENOMEM;
+
+ sreg->pmic = pmic;
+ mutex_init(&sreg->enable_mutex);
+
+ for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
+ info = ®ulator_info[i];
+
+ config.dev = pdev->dev.parent;
+ config.driver_data = sreg;
+ config.regmap = pmic->regmap;
+
+ rdev = devm_regulator_register(dev, &info->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "failed to register %s\n",
+ info->desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id hi6421_spmi_regulator_table[] = {
+ { .name = "hi6421v600-regulator" },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, hi6421_spmi_regulator_table);
+
+static struct platform_driver hi6421_spmi_regulator_driver = {
+ .id_table = hi6421_spmi_regulator_table,
+ .driver = {
+ .name = "hi6421v600-regulator",
+ },
+ .probe = hi6421_spmi_regulator_probe,
+};
+module_platform_driver(hi6421_spmi_regulator_driver);
+
+MODULE_DESCRIPTION("Hi6421v600 SPMI regulator driver");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index b22f73d7bfc4..db7ec218644f 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -112,6 +112,4 @@ source "drivers/staging/wimax/Kconfig"
source "drivers/staging/wfx/Kconfig"
-source "drivers/staging/hikey9xx/Kconfig"
-
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 2245059e69c7..7b0ef538dcce 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -46,4 +46,3 @@ obj-$(CONFIG_KPC2000) += kpc2000/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_WIMAX) += wimax/
obj-$(CONFIG_WFX) += wfx/
-obj-y += hikey9xx/
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
deleted file mode 100644
index 1afb8648a2c4..000000000000
--- a/drivers/staging/hikey9xx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# to be placed at drivers/regulator
-config REGULATOR_HI6421V600
- tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
- depends on MFD_HI6421_SPMI && OF
- depends on REGULATOR
- help
- This driver provides support for the voltage regulators on
- HiSilicon Hi6421v600 PMU / Codec IC.
- This is used on Kirin 3670 boards, like HiKey 970.
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
deleted file mode 100644
index 4d63184e6086..000000000000
--- a/drivers/staging/hikey9xx/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o
diff --git a/drivers/staging/hikey9xx/TODO b/drivers/staging/hikey9xx/TODO
deleted file mode 100644
index 65e7996a3066..000000000000
--- a/drivers/staging/hikey9xx/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-ToDo list:
-
-- Port other drivers needed by Hikey 960/970;
-- Test drivers on Hikey 960;
-- Validate device tree bindings.
diff --git a/drivers/staging/hikey9xx/hi6421v600-regulator.c b/drivers/staging/hikey9xx/hi6421v600-regulator.c
deleted file mode 100644
index c801bb840962..000000000000
--- a/drivers/staging/hikey9xx/hi6421v600-regulator.c
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Device driver for regulators in Hisi IC
-//
-// Copyright (c) 2013 Linaro Ltd.
-// Copyright (c) 2011 Hisilicon.
-// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
-//
-// Guodong Xu <guodong.xu@linaro.org>
-
-#include <linux/delay.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/regulator/driver.h>
-#include <linux/spmi.h>
-
-struct hi6421_spmi_reg_info {
- struct regulator_desc desc;
- struct hi6421_spmi_pmic *pmic;
- u8 eco_mode_mask;
- u32 eco_uA;
-
- /* Serialize regulator enable logic */
- struct mutex enable_mutex;
-};
-
-static const unsigned int ldo3_voltages[] = {
- 1500000, 1550000, 1600000, 1650000,
- 1700000, 1725000, 1750000, 1775000,
- 1800000, 1825000, 1850000, 1875000,
- 1900000, 1925000, 1950000, 2000000
-};
-
-static const unsigned int ldo4_voltages[] = {
- 1725000, 1750000, 1775000, 1800000,
- 1825000, 1850000, 1875000, 1900000
-};
-
-static const unsigned int ldo9_voltages[] = {
- 1750000, 1800000, 1825000, 2800000,
- 2850000, 2950000, 3000000, 3300000
-};
-
-static const unsigned int ldo15_voltages[] = {
- 1800000, 1850000, 2400000, 2600000,
- 2700000, 2850000, 2950000, 3000000
-};
-
-static const unsigned int ldo17_voltages[] = {
- 2500000, 2600000, 2700000, 2800000,
- 3000000, 3100000, 3200000, 3300000
-};
-
-static const unsigned int ldo34_voltages[] = {
- 2600000, 2700000, 2800000, 2900000,
- 3000000, 3100000, 3200000, 3300000
-};
-
-/**
- * HI6421V600_LDO() - specify a LDO power line
- * @_id: LDO id name string
- * @vtable: voltage table
- * @ereg: enable register
- * @emask: enable mask
- * @vreg: voltage select register
- * @odelay: off/on delay time in uS
- * @etime: enable time in uS
- * @ecomask: eco mode mask
- * @ecoamp: eco mode load uppler limit in uA
- */
-#define HI6421V600_LDO(_id, vtable, ereg, emask, vreg, \
- odelay, etime, ecomask, ecoamp) \
- [HI6421V600_##_id] = { \
- .desc = { \
- .name = #_id, \
- .of_match = of_match_ptr(#_id), \
- .regulators_node = of_match_ptr("regulators"), \
- .ops = &hi6421_spmi_ldo_rops, \
- .type = REGULATOR_VOLTAGE, \
- .id = HI6421V600_##_id, \
- .owner = THIS_MODULE, \
- .volt_table = vtable, \
- .n_voltages = ARRAY_SIZE(vtable), \
- .vsel_mask = (1 << (ARRAY_SIZE(vtable) - 1)) - 1, \
- .vsel_reg = vreg, \
- .enable_reg = ereg, \
- .enable_mask = emask, \
- .enable_time = etime, \
- .ramp_delay = etime, \
- .off_on_delay = odelay, \
- }, \
- .eco_mode_mask = ecomask, \
- .eco_uA = ecoamp, \
- }
-
-static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
- struct hi6421_spmi_pmic *pmic = sreg->pmic;
- int ret;
-
- /* cannot enable more than one regulator at one time */
- mutex_lock(&sreg->enable_mutex);
-
- ret = regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask,
- rdev->desc->enable_mask);
-
- /* Avoid powering up multiple devices at the same time */
- usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
-
- mutex_unlock(&sreg->enable_mutex);
-
- return ret;
-}
-
-static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
- struct hi6421_spmi_pmic *pmic = sreg->pmic;
-
- return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, 0);
-}
-
-static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
- struct hi6421_spmi_pmic *pmic = sreg->pmic;
- u32 reg_val;
-
- regmap_read(pmic->regmap, rdev->desc->enable_reg, ®_val);
-
- if (reg_val & sreg->eco_mode_mask)
- return REGULATOR_MODE_IDLE;
-
- return REGULATOR_MODE_NORMAL;
-}
-
-static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
- unsigned int mode)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
- struct hi6421_spmi_pmic *pmic = sreg->pmic;
- u32 val;
-
- switch (mode) {
- case REGULATOR_MODE_NORMAL:
- val = 0;
- break;
- case REGULATOR_MODE_IDLE:
- val = sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1);
- break;
- default:
- return -EINVAL;
- }
-
- return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
- sreg->eco_mode_mask, val);
-}
-
-static unsigned int
-hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
- int input_uV, int output_uV,
- int load_uA)
-{
- struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-
- if (!sreg->eco_uA || ((unsigned int)load_uA > sreg->eco_uA))
- return REGULATOR_MODE_NORMAL;
-
- return REGULATOR_MODE_IDLE;
-}
-
-static const struct regulator_ops hi6421_spmi_ldo_rops = {
- .is_enabled = regulator_is_enabled_regmap,
- .enable = hi6421_spmi_regulator_enable,
- .disable = hi6421_spmi_regulator_disable,
- .list_voltage = regulator_list_voltage_table,
- .map_voltage = regulator_map_voltage_iterate,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_mode = hi6421_spmi_regulator_get_mode,
- .set_mode = hi6421_spmi_regulator_set_mode,
- .get_optimum_mode = hi6421_spmi_regulator_get_optimum_mode,
-};
-
-/* HI6421v600 regulators with known registers */
-enum hi6421_spmi_regulator_id {
- HI6421V600_LDO3,
- HI6421V600_LDO4,
- HI6421V600_LDO9,
- HI6421V600_LDO15,
- HI6421V600_LDO16,
- HI6421V600_LDO17,
- HI6421V600_LDO33,
- HI6421V600_LDO34,
-};
-
-static struct hi6421_spmi_reg_info regulator_info[] = {
- HI6421V600_LDO(LDO3, ldo3_voltages,
- 0x16, 0x01, 0x51,
- 20000, 120,
- 0, 0),
- HI6421V600_LDO(LDO4, ldo4_voltages,
- 0x17, 0x01, 0x52,
- 20000, 120,
- 0x10, 10000),
- HI6421V600_LDO(LDO9, ldo9_voltages,
- 0x1c, 0x01, 0x57,
- 20000, 360,
- 0x10, 10000),
- HI6421V600_LDO(LDO15, ldo15_voltages,
- 0x21, 0x01, 0x5c,
- 20000, 360,
- 0x10, 10000),
- HI6421V600_LDO(LDO16, ldo15_voltages,
- 0x22, 0x01, 0x5d,
- 20000, 360,
- 0x10, 10000),
- HI6421V600_LDO(LDO17, ldo17_voltages,
- 0x23, 0x01, 0x5e,
- 20000, 120,
- 0x10, 10000),
- HI6421V600_LDO(LDO33, ldo17_voltages,
- 0x32, 0x01, 0x6d,
- 20000, 120,
- 0, 0),
- HI6421V600_LDO(LDO34, ldo34_voltages,
- 0x33, 0x01, 0x6e,
- 20000, 120,
- 0, 0),
-};
-
-static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
-{
- struct device *pmic_dev = pdev->dev.parent;
- struct regulator_config config = { };
- struct hi6421_spmi_reg_info *sreg;
- struct hi6421_spmi_reg_info *info;
- struct device *dev = &pdev->dev;
- struct hi6421_spmi_pmic *pmic;
- struct regulator_dev *rdev;
- int i;
-
- /*
- * This driver is meant to be called by hi6421-spmi-core,
- * which should first set drvdata. If this doesn't happen, hit
- * a warn on and return.
- */
- pmic = dev_get_drvdata(pmic_dev);
- if (WARN_ON(!pmic))
- return -ENODEV;
-
- sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
- if (!sreg)
- return -ENOMEM;
-
- sreg->pmic = pmic;
- mutex_init(&sreg->enable_mutex);
-
- for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
- info = ®ulator_info[i];
-
- config.dev = pdev->dev.parent;
- config.driver_data = sreg;
- config.regmap = pmic->regmap;
-
- rdev = devm_regulator_register(dev, &info->desc, &config);
- if (IS_ERR(rdev)) {
- dev_err(dev, "failed to register %s\n",
- info->desc.name);
- return PTR_ERR(rdev);
- }
- }
-
- return 0;
-}
-
-static const struct platform_device_id hi6421_spmi_regulator_table[] = {
- { .name = "hi6421v600-regulator" },
- {},
-};
-MODULE_DEVICE_TABLE(platform, hi6421_spmi_regulator_table);
-
-static struct platform_driver hi6421_spmi_regulator_driver = {
- .id_table = hi6421_spmi_regulator_table,
- .driver = {
- .name = "hi6421v600-regulator",
- },
- .probe = hi6421_spmi_regulator_probe,
-};
-module_platform_driver(hi6421_spmi_regulator_driver);
-
-MODULE_DESCRIPTION("Hi6421v600 SPMI regulator driver");
-MODULE_LICENSE("GPL v2");
-
--
2.29.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v7 14/14] dts: hisilicon: add support for the PMIC found on Hikey 970
2021-01-29 15:03 ` Mauro Carvalho Chehab
` (13 preceding siblings ...)
(?)
@ 2021-01-29 15:03 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 15:03 UTC (permalink / raw)
Cc: devicetree, Mauro Carvalho Chehab, linux-kernel, Wei Xu,
Rob Herring, linux-arm-kernel
Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
on HiKey970 board.
As we now have support for it, change the fixed regulators
used by the SD I/O to use the proper LDO supplies.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../boot/dts/hisilicon/hi3670-hikey970.dts | 22 +----
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 87 +++++++++++++++++++
2 files changed, 90 insertions(+), 19 deletions(-)
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 7f9f9886c349..5e6d7b329771 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -12,6 +12,7 @@
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
/ {
model = "HiKey970";
@@ -39,23 +40,6 @@ memory@0 {
reg = <0x0 0x0 0x0 0x0>;
};
- sd_1v8: regulator-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- sd_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
@@ -402,8 +386,8 @@ &dwmmc1 {
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
- vmmc-supply = <&sd_3v3>;
- vqmmc-supply = <&sd_1v8>;
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000000..8cf45b962fea
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "okay";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ spmi-channel = <2>;
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi";
+ reg = <0 SPMI_USID>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 { /* 40 PIN */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15: LDO15 { /* UFS */
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16: LDO16 { /* SD */
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17: LDO17 {
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33: LDO33 { /* PEX8606 */
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34: LDO34 { /* GPS AUX IN VDD */
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+};
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v7 01/14] staging: hikey9xx: spmi driver: convert to regmap
2021-01-29 15:03 ` [PATCH v7 01/14] staging: hikey9xx: spmi driver: convert to regmap Mauro Carvalho Chehab
@ 2021-01-29 15:45 ` Greg Kroah-Hartman
2021-01-29 19:44 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 21+ messages in thread
From: Greg Kroah-Hartman @ 2021-01-29 15:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: devel, Lee Jones, linux-kernel, Mayulong
On Fri, Jan 29, 2021 at 04:03:36PM +0100, Mauro Carvalho Chehab wrote:
> Instead of doing its own SPMI I/O implementation, use the
> already-existing regmap one.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 115 ++++++------------
> .../staging/hikey9xx/hi6421v600-regulator.c | 26 ++--
> include/linux/mfd/hi6421-spmi-pmic.h | 7 +-
> 3 files changed, 52 insertions(+), 96 deletions(-)
After applying this, I get a build failure:
ERROR: modpost: "__devm_regmap_init_spmi_ext" [drivers/staging/hikey9xx/hi6421-spmi-pmic.ko] undefined!
So you need some sort of build dependancy here :(
Also, when I apply the first 9 patches and stop, I get a build error
that you should see as well, so I can't take any of these right now,
sorry.
thanks,
greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 01/14] staging: hikey9xx: spmi driver: convert to regmap
2021-01-29 15:45 ` Greg Kroah-Hartman
@ 2021-01-29 19:44 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 19:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Mayulong, linux-kernel, Lee Jones
Em Fri, 29 Jan 2021 16:45:11 +0100
Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:
> On Fri, Jan 29, 2021 at 04:03:36PM +0100, Mauro Carvalho Chehab wrote:
> > Instead of doing its own SPMI I/O implementation, use the
> > already-existing regmap one.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> > ---
> > drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 115 ++++++------------
> > .../staging/hikey9xx/hi6421v600-regulator.c | 26 ++--
> > include/linux/mfd/hi6421-spmi-pmic.h | 7 +-
> > 3 files changed, 52 insertions(+), 96 deletions(-)
>
> After applying this, I get a build failure:
>
> ERROR: modpost: "__devm_regmap_init_spmi_ext" [drivers/staging/hikey9xx/hi6421-spmi-pmic.ko] undefined!
>
> So you need some sort of build dependancy here :(
It seems that it is missing REGMAP_SPMI.
> Also, when I apply the first 9 patches and stop, I get a build error
> that you should see as well, so I can't take any of these right now,
> sorry.
Gah, there was a rename patch which a hunk that went into the
following patch. Sorry.
Added the missing select REGMAP_SPMI / REGMAP, fixed it and
tested, patch-per-patch.
I'll run a new test at the hardware to double-check if everything is
OK at the hardware and should be re-submitting the series soon enough.
Thanks,
Mauro
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 01/14] staging: hikey9xx: spmi driver: convert to regmap
@ 2021-01-29 19:44 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2021-01-29 19:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Lee Jones, linux-kernel, Mayulong
Em Fri, 29 Jan 2021 16:45:11 +0100
Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:
> On Fri, Jan 29, 2021 at 04:03:36PM +0100, Mauro Carvalho Chehab wrote:
> > Instead of doing its own SPMI I/O implementation, use the
> > already-existing regmap one.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> > ---
> > drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 115 ++++++------------
> > .../staging/hikey9xx/hi6421v600-regulator.c | 26 ++--
> > include/linux/mfd/hi6421-spmi-pmic.h | 7 +-
> > 3 files changed, 52 insertions(+), 96 deletions(-)
>
> After applying this, I get a build failure:
>
> ERROR: modpost: "__devm_regmap_init_spmi_ext" [drivers/staging/hikey9xx/hi6421-spmi-pmic.ko] undefined!
>
> So you need some sort of build dependancy here :(
It seems that it is missing REGMAP_SPMI.
> Also, when I apply the first 9 patches and stop, I get a build error
> that you should see as well, so I can't take any of these right now,
> sorry.
Gah, there was a rename patch which a hunk that went into the
following patch. Sorry.
Added the missing select REGMAP_SPMI / REGMAP, fixed it and
tested, patch-per-patch.
I'll run a new test at the hardware to double-check if everything is
OK at the hardware and should be re-submitting the series soon enough.
Thanks,
Mauro
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 10/14] phy: phy-hi3670-usb3: move driver from staging into phy
2021-01-29 15:03 ` [PATCH v7 10/14] phy: phy-hi3670-usb3: move driver from staging into phy Mauro Carvalho Chehab
@ 2021-02-04 8:03 ` Vinod Koul
0 siblings, 0 replies; 21+ messages in thread
From: Vinod Koul @ 2021-02-04 8:03 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Alex Dewar, David Gow, Greg Kroah-Hartman,
Kishon Vijay Abraham I, Rob Herring, Yu Chen, devel, devicetree,
linux-kernel
On 29-01-21, 16:03, Mauro Carvalho Chehab wrote:
> The phy USB3 driver for Hisilicon 970 (hi3670) is ready
> for mainstream. Mode it from staging into the main driver's
> phy/ directory.
Acked-By: Vinod Koul <vkoul@kernel.org>
--
~Vinod
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 10/14] phy: phy-hi3670-usb3: move driver from staging into phy
@ 2021-02-04 8:03 ` Vinod Koul
0 siblings, 0 replies; 21+ messages in thread
From: Vinod Koul @ 2021-02-04 8:03 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: devel, devicetree, Greg Kroah-Hartman, Yu Chen, linux-kernel,
Kishon Vijay Abraham I, Rob Herring, David Gow, Alex Dewar
On 29-01-21, 16:03, Mauro Carvalho Chehab wrote:
> The phy USB3 driver for Hisilicon 970 (hi3670) is ready
> for mainstream. Mode it from staging into the main driver's
> phy/ directory.
Acked-By: Vinod Koul <vkoul@kernel.org>
--
~Vinod
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2021-02-04 8:05 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-29 15:03 [PATCH v7 00/14] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
2021-01-29 15:03 ` Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 01/14] staging: hikey9xx: spmi driver: convert to regmap Mauro Carvalho Chehab
2021-01-29 15:45 ` Greg Kroah-Hartman
2021-01-29 19:44 ` Mauro Carvalho Chehab
2021-01-29 19:44 ` Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 02/14] staging: hikey9xx: hi6421v600-regulator: use some regmap helpers Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 03/14] staging: hikey9xx: hi6421-spmi-pmic: rename some vars Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 04/14] staging: hikey9xx: hi6421-spmi-pmic: cleanup probe code Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 05/14] staging: hikey9xx: hi6421-spmi-pmic: cleanup header file Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 06/14] staging: hikey9xx: hi6421-spmi-pmic: fix IRQ handler code Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 07/14] staging: hikey9xx: hi6421-spmi-pmic: cleanup IRQ handling code Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 08/14] staging: hikey9xx: hi6421-spmi-pmic: document registers Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 09/14] staging: hikey9xx: hi6421-spmi-pmic: update copyright notes Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 10/14] phy: phy-hi3670-usb3: move driver from staging into phy Mauro Carvalho Chehab
2021-02-04 8:03 ` Vinod Koul
2021-02-04 8:03 ` Vinod Koul
2021-01-29 15:03 ` [PATCH v7 11/14] spmi: hisi-spmi-controller: move driver from staging Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 12/14] mfd: hi6421-spmi-pmic: " Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 13/14] regulator: hi6421v600-regulator: move it " Mauro Carvalho Chehab
2021-01-29 15:03 ` [PATCH v7 14/14] dts: hisilicon: add support for the PMIC found on Hikey 970 Mauro Carvalho Chehab
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.