From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: Al Cooper <alcooperx@gmail.com>, Alan Stern <stern@rowland.harvard.edu>, "Alexander A. Klimov" <grandmaster@al2klimov.de>, Bastien Nocera <hadess@hadess.net>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Masahiro Yamada <masahiroy@kernel.org>, Piyush Mehta <piyush.mehta@xilinx.com>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org Subject: [PATCH 0/2] usb: misc: Add support for Microchip USB5744 Date: Tue, 9 Feb 2021 10:53:18 +0100 [thread overview] Message-ID: <cover.1612864393.git.michal.simek@xilinx.com> (raw) Hi, the series is adding basic support for this USB hub. The key part is running reset over GPIO line and when i2c is connected it is necessary to send command to boot the hub. This chip is available on Xilinx zcu100/Ultra96 v1 board. Thanks, Michal Piyush Mehta (2): dt-bindings: usb: misc: Add binding for Microchip usb5744 hub usb: misc: usb5744: Add support for USB hub controller .../bindings/usb/microchip,usb5744.yaml | 56 +++++++++ MAINTAINERS | 2 + drivers/usb/misc/Kconfig | 9 ++ drivers/usb/misc/Makefile | 1 + drivers/usb/misc/usb5744.c | 115 ++++++++++++++++++ 5 files changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/microchip,usb5744.yaml create mode 100644 drivers/usb/misc/usb5744.c -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org, "Alexander A. Klimov" <grandmaster@al2klimov.de>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Masahiro Yamada <masahiroy@kernel.org>, Al Cooper <alcooperx@gmail.com>, Rob Herring <robh+dt@kernel.org>, Alan Stern <stern@rowland.harvard.edu>, Bastien Nocera <hadess@hadess.net>, Piyush Mehta <piyush.mehta@xilinx.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/2] usb: misc: Add support for Microchip USB5744 Date: Tue, 9 Feb 2021 10:53:18 +0100 [thread overview] Message-ID: <cover.1612864393.git.michal.simek@xilinx.com> (raw) Hi, the series is adding basic support for this USB hub. The key part is running reset over GPIO line and when i2c is connected it is necessary to send command to boot the hub. This chip is available on Xilinx zcu100/Ultra96 v1 board. Thanks, Michal Piyush Mehta (2): dt-bindings: usb: misc: Add binding for Microchip usb5744 hub usb: misc: usb5744: Add support for USB hub controller .../bindings/usb/microchip,usb5744.yaml | 56 +++++++++ MAINTAINERS | 2 + drivers/usb/misc/Kconfig | 9 ++ drivers/usb/misc/Makefile | 1 + drivers/usb/misc/usb5744.c | 115 ++++++++++++++++++ 5 files changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/microchip,usb5744.yaml create mode 100644 drivers/usb/misc/usb5744.c -- 2.30.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-02-09 9:57 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-09 9:53 Michal Simek [this message] 2021-02-09 9:53 ` [PATCH 0/2] usb: misc: Add support for Microchip USB5744 Michal Simek 2021-02-09 9:53 ` [PATCH 1/2] dt-bindings: usb: misc: Add binding for Microchip usb5744 hub Michal Simek 2021-02-09 9:53 ` Michal Simek 2021-02-09 9:53 ` [PATCH 2/2] usb: misc: usb5744: Add support for USB hub controller Michal Simek 2021-02-09 9:53 ` Michal Simek 2021-02-09 10:03 ` Greg Kroah-Hartman 2021-02-09 10:03 ` Greg Kroah-Hartman 2021-02-09 10:11 ` Michal Simek 2021-02-09 10:11 ` Michal Simek 2021-02-09 10:40 ` Greg Kroah-Hartman 2021-02-09 10:40 ` Greg Kroah-Hartman 2021-02-10 2:52 ` Andrew Lunn 2021-02-10 2:52 ` Andrew Lunn 2021-02-10 11:03 ` Michal Simek 2021-02-10 11:03 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.1612864393.git.michal.simek@xilinx.com \ --to=michal.simek@xilinx.com \ --cc=alcooperx@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=git@xilinx.com \ --cc=grandmaster@al2klimov.de \ --cc=gregkh@linuxfoundation.org \ --cc=hadess@hadess.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=masahiroy@kernel.org \ --cc=monstr@monstr.eu \ --cc=piyush.mehta@xilinx.com \ --cc=robh+dt@kernel.org \ --cc=stern@rowland.harvard.edu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.