All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Guido Günther" <agx@sigxcpu.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Robert Chiras <robert.chiras@nxp.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Liu Ying <victor.liu@nxp.com>
Subject: [PATCH v4 0/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm
Date: Mon, 22 Feb 2021 19:38:10 +0100	[thread overview]
Message-ID: <cover.1614019053.git.agx@sigxcpu.org> (raw)

This allows us to shut down the mipi power domain on the imx8. The alternative
would be to drop the dphy from the mipi power domain in the SOCs device tree
and only have the DSI host controller visible there but since the PD is mostly
about the PHY that would defeat it's purpose.

This allows to shut off the power domain hen blanking the LCD panel:

pm_genpd_summary before:

domain                          status          slaves
    /device                                             runtime status
----------------------------------------------------------------------
mipi                            on
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  unsupported
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

after:

mipi                            off-0
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  suspended
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

Changes from v1:
 - Tweak commit message slightly

Changes from v2:
  - As per review comment by Lucas Stach
    https://lore.kernel.org/linux-arm-kernel/ee22b072e0abe07559a3e6a63ccf6ece064a46cb.camel@pengutronix.de/
    Check for pm_runtime_get_sync failure

Changes from v3:
  - As per review comment by Liu Ying
    https://lore.kernel.org/linux-arm-kernel/424af315b677934fe6a91cee5a0a7aee058245a9.camel@nxp.com/
    https://lore.kernel.org/linux-arm-kernel/a98f7531b9d0293d3c89174446f742d4199cb27c.camel@nxp.com/
    - Use phy layers runtime pm
    - simplify mixel_dphy_remove



Guido Günther (1):
  phy: fsl-imx8-mipi-dphy: Hook into runtime pm

 drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

-- 
2.30.0


WARNING: multiple messages have this Message-ID (diff)
From: "Guido Günther" <agx@sigxcpu.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Robert Chiras <robert.chiras@nxp.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Liu Ying <victor.liu@nxp.com>
Subject: [PATCH v4 0/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm
Date: Mon, 22 Feb 2021 19:38:10 +0100	[thread overview]
Message-ID: <cover.1614019053.git.agx@sigxcpu.org> (raw)

This allows us to shut down the mipi power domain on the imx8. The alternative
would be to drop the dphy from the mipi power domain in the SOCs device tree
and only have the DSI host controller visible there but since the PD is mostly
about the PHY that would defeat it's purpose.

This allows to shut off the power domain hen blanking the LCD panel:

pm_genpd_summary before:

domain                          status          slaves
    /device                                             runtime status
----------------------------------------------------------------------
mipi                            on
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  unsupported
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

after:

mipi                            off-0
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  suspended
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

Changes from v1:
 - Tweak commit message slightly

Changes from v2:
  - As per review comment by Lucas Stach
    https://lore.kernel.org/linux-arm-kernel/ee22b072e0abe07559a3e6a63ccf6ece064a46cb.camel@pengutronix.de/
    Check for pm_runtime_get_sync failure

Changes from v3:
  - As per review comment by Liu Ying
    https://lore.kernel.org/linux-arm-kernel/424af315b677934fe6a91cee5a0a7aee058245a9.camel@nxp.com/
    https://lore.kernel.org/linux-arm-kernel/a98f7531b9d0293d3c89174446f742d4199cb27c.camel@nxp.com/
    - Use phy layers runtime pm
    - simplify mixel_dphy_remove



Guido Günther (1):
  phy: fsl-imx8-mipi-dphy: Hook into runtime pm

 drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

-- 
2.30.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-02-22 18:39 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-22 18:38 Guido Günther [this message]
2021-02-22 18:38 ` [PATCH v4 0/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm Guido Günther
2021-02-22 18:38 ` [PATCH v4 1/1] " Guido Günther
2021-02-22 18:38   ` Guido Günther
2021-02-23  2:36   ` Liu Ying
2021-02-23  2:36     ` Liu Ying
2021-02-23  2:54     ` Liu Ying
2021-02-23  2:54       ` Liu Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1614019053.git.agx@sigxcpu.org \
    --to=agx@sigxcpu.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robert.chiras@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sam@ravnborg.org \
    --cc=shawnguo@kernel.org \
    --cc=victor.liu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.