* [PATCH net-next 0/7] sctp: support vrf processing
@ 2022-11-13 16:44 Xin Long
2022-11-13 16:44 ` [PATCH net-next 1/7] sctp: verify the bind address with the tb_id from l3mdev Xin Long
` (6 more replies)
0 siblings, 7 replies; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
This patchset adds the VRF processing in SCTP. Simliar to TCP/UDP,
it includes socket bind and socket/association lookup changes.
For socket bind change, it allows sockets to bind to a VRF device
and allows multiple sockets with the same IP and PORT to bind to
different interfaces in patch 1-3.
For socket/association lookup change, it adds dif and sdif check
in both asoc and ep lookup in patch 4 and 5, and when binding to
nodev, users can decide if accept the packets received from one
l3mdev by setup a sysctl option in patch 6.
Note with VRF support, in a netns, an association will be decided
by src ip + src port + dst ip + dst port + bound_dev_if, and it's
possible for ss to have:
# ss --sctp -n
State Local Address:Port Peer Address:Port
ESTAB 192.168.1.2%vrf-s1:1234
`- ESTAB 192.168.1.2%veth1:1234 192.168.1.1:1234
ESTAB 192.168.1.2%vrf-s2:1234
`- ESTAB 192.168.1.2%veth2:1234 192.168.1.1:1234
See the selftest in patch 7 for more usage.
Also, thanks Carlo for testing this patch series on their use.
Xin Long (7):
sctp: verify the bind address with the tb_id from l3mdev
sctp: check ipv6 addr with sk_bound_dev if set
sctp: check sk_bound_dev_if when matching ep in get_port
sctp: add skb_sdif in struct sctp_af
sctp: add dif and sdif check in asoc and ep lookup
sctp: add sysctl net.sctp.l3mdev_accept
selftests: add a selftest for sctp vrf
Documentation/networking/ip-sysctl.rst | 9 ++
include/net/netns/sctp.h | 4 +
include/net/sctp/sctp.h | 16 ++-
include/net/sctp/structs.h | 9 +-
net/sctp/diag.c | 3 +-
net/sctp/endpointola.c | 13 +-
net/sctp/input.c | 98 +++++++-------
net/sctp/ipv6.c | 22 +++-
net/sctp/protocol.c | 19 ++-
net/sctp/socket.c | 9 +-
net/sctp/sysctl.c | 11 ++
tools/testing/selftests/net/Makefile | 2 +
tools/testing/selftests/net/sctp_hello.c | 139 ++++++++++++++++++++
tools/testing/selftests/net/sctp_vrf.sh | 160 +++++++++++++++++++++++
14 files changed, 445 insertions(+), 69 deletions(-)
create mode 100644 tools/testing/selftests/net/sctp_hello.c
create mode 100755 tools/testing/selftests/net/sctp_vrf.sh
--
2.31.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH net-next 1/7] sctp: verify the bind address with the tb_id from l3mdev
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
@ 2022-11-13 16:44 ` Xin Long
2022-11-13 16:44 ` [PATCH net-next 2/7] sctp: check ipv6 addr with sk_bound_dev if set Xin Long
` (5 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
After binding to a l3mdev, it should use the route table from the
corresponding VRF to verify the addr when binding to an address.
Note ipv6 doesn't need it, as binding to ipv6 address does not
verify the addr with route lookup.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
net/sctp/protocol.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index bcd3384ab07a..dbfe7d1000c2 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -351,10 +351,13 @@ static int sctp_v4_addr_valid(union sctp_addr *addr,
/* Should this be available for binding? */
static int sctp_v4_available(union sctp_addr *addr, struct sctp_sock *sp)
{
- struct net *net = sock_net(&sp->inet.sk);
- int ret = inet_addr_type(net, addr->v4.sin_addr.s_addr);
-
+ struct sock *sk = &sp->inet.sk;
+ struct net *net = sock_net(sk);
+ int tb_id = RT_TABLE_LOCAL;
+ int ret;
+ tb_id = l3mdev_fib_table_by_index(net, sk->sk_bound_dev_if) ?: tb_id;
+ ret = inet_addr_type_table(net, addr->v4.sin_addr.s_addr, tb_id);
if (addr->v4.sin_addr.s_addr != htonl(INADDR_ANY) &&
ret != RTN_LOCAL &&
!sp->inet.freebind &&
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH net-next 2/7] sctp: check ipv6 addr with sk_bound_dev if set
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
2022-11-13 16:44 ` [PATCH net-next 1/7] sctp: verify the bind address with the tb_id from l3mdev Xin Long
@ 2022-11-13 16:44 ` Xin Long
2022-11-13 16:44 ` [PATCH net-next 3/7] sctp: check sk_bound_dev_if when matching ep in get_port Xin Long
` (4 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
When binding to an ipv6 address, it calls ipv6_chk_addr() to check if
this address is on any dev. If a socket binds to a l3mdev but no dev
is passed to do this check, all l3mdev and slaves will be skipped and
the check will fail.
This patch is to pass the bound_dev to make sure the devices under the
same l3mdev can be returned in ipv6_chk_addr(). When the bound_dev is
not a l3mdev or l3slave, l3mdev_master_dev_rcu() will return NULL in
__ipv6_chk_addr_and_flags(), it will keep compitable with before when
NULL dev was passed.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
net/sctp/ipv6.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index d081858c2d07..e6274cdbdf6c 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -680,9 +680,11 @@ static int sctp_v6_is_any(const union sctp_addr *addr)
/* Should this be available for binding? */
static int sctp_v6_available(union sctp_addr *addr, struct sctp_sock *sp)
{
- int type;
- struct net *net = sock_net(&sp->inet.sk);
const struct in6_addr *in6 = (const struct in6_addr *)&addr->v6.sin6_addr;
+ struct sock *sk = &sp->inet.sk;
+ struct net *net = sock_net(sk);
+ struct net_device *dev = NULL;
+ int type;
type = ipv6_addr_type(in6);
if (IPV6_ADDR_ANY == type)
@@ -696,8 +698,14 @@ static int sctp_v6_available(union sctp_addr *addr, struct sctp_sock *sp)
if (!(type & IPV6_ADDR_UNICAST))
return 0;
+ if (sk->sk_bound_dev_if) {
+ dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
+ if (!dev)
+ return 0;
+ }
+
return ipv6_can_nonlocal_bind(net, &sp->inet) ||
- ipv6_chk_addr(net, in6, NULL, 0);
+ ipv6_chk_addr(net, in6, dev, 0);
}
/* This function checks if the address is a valid address to be used for
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH net-next 3/7] sctp: check sk_bound_dev_if when matching ep in get_port
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
2022-11-13 16:44 ` [PATCH net-next 1/7] sctp: verify the bind address with the tb_id from l3mdev Xin Long
2022-11-13 16:44 ` [PATCH net-next 2/7] sctp: check ipv6 addr with sk_bound_dev if set Xin Long
@ 2022-11-13 16:44 ` Xin Long
2022-11-13 16:44 ` [PATCH net-next 4/7] sctp: add skb_sdif in struct sctp_af Xin Long
` (3 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
In sctp_get_port_local(), when binding to IP and PORT, it should
also check sk_bound_dev_if to match listening sk if it's set by
SO_BINDTOIFINDEX, so that multiple sockets with the same IP and
PORT, but different sk_bound_dev_if can be listened at the same
time.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
net/sctp/socket.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 3e83963d1b8a..4306164238ef 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -8398,6 +8398,7 @@ static int sctp_get_port_local(struct sock *sk, union sctp_addr *addr)
* in an endpoint.
*/
sk_for_each_bound(sk2, &pp->owner) {
+ int bound_dev_if2 = READ_ONCE(sk2->sk_bound_dev_if);
struct sctp_sock *sp2 = sctp_sk(sk2);
struct sctp_endpoint *ep2 = sp2->ep;
@@ -8408,7 +8409,9 @@ static int sctp_get_port_local(struct sock *sk, union sctp_addr *addr)
uid_eq(uid, sock_i_uid(sk2))))
continue;
- if (sctp_bind_addr_conflict(&ep2->base.bind_addr,
+ if ((!sk->sk_bound_dev_if || !bound_dev_if2 ||
+ sk->sk_bound_dev_if == bound_dev_if2) &&
+ sctp_bind_addr_conflict(&ep2->base.bind_addr,
addr, sp2, sp)) {
ret = 1;
goto fail_unlock;
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH net-next 4/7] sctp: add skb_sdif in struct sctp_af
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
` (2 preceding siblings ...)
2022-11-13 16:44 ` [PATCH net-next 3/7] sctp: check sk_bound_dev_if when matching ep in get_port Xin Long
@ 2022-11-13 16:44 ` Xin Long
2022-11-13 16:44 ` [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup Xin Long
` (2 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
Add skb_sdif function in struct sctp_af to get the enslaved device
for both ipv4 and ipv6 when adding SCTP VRF support in sctp_rcv in
the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/structs.h | 1 +
net/sctp/ipv6.c | 8 +++++++-
net/sctp/protocol.c | 6 ++++++
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 350f250b0dc7..7b4884c63b26 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -477,6 +477,7 @@ struct sctp_af {
int (*available) (union sctp_addr *,
struct sctp_sock *);
int (*skb_iif) (const struct sk_buff *sk);
+ int (*skb_sdif)(const struct sk_buff *sk);
int (*is_ce) (const struct sk_buff *sk);
void (*seq_dump_addr)(struct seq_file *seq,
union sctp_addr *addr);
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index e6274cdbdf6c..097bd60ce964 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -842,7 +842,12 @@ static int sctp_v6_addr_to_user(struct sctp_sock *sp, union sctp_addr *addr)
/* Where did this skb come from? */
static int sctp_v6_skb_iif(const struct sk_buff *skb)
{
- return IP6CB(skb)->iif;
+ return inet6_iif(skb);
+}
+
+static int sctp_v6_skb_sdif(const struct sk_buff *skb)
+{
+ return inet6_sdif(skb);
}
/* Was this packet marked by Explicit Congestion Notification? */
@@ -1142,6 +1147,7 @@ static struct sctp_af sctp_af_inet6 = {
.is_any = sctp_v6_is_any,
.available = sctp_v6_available,
.skb_iif = sctp_v6_skb_iif,
+ .skb_sdif = sctp_v6_skb_sdif,
.is_ce = sctp_v6_is_ce,
.seq_dump_addr = sctp_v6_seq_dump_addr,
.ecn_capable = sctp_v6_ecn_capable,
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index dbfe7d1000c2..a18cf0471a8d 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -567,6 +567,11 @@ static int sctp_v4_skb_iif(const struct sk_buff *skb)
return inet_iif(skb);
}
+static int sctp_v4_skb_sdif(const struct sk_buff *skb)
+{
+ return inet_sdif(skb);
+}
+
/* Was this packet marked by Explicit Congestion Notification? */
static int sctp_v4_is_ce(const struct sk_buff *skb)
{
@@ -1185,6 +1190,7 @@ static struct sctp_af sctp_af_inet = {
.available = sctp_v4_available,
.scope = sctp_v4_scope,
.skb_iif = sctp_v4_skb_iif,
+ .skb_sdif = sctp_v4_skb_sdif,
.is_ce = sctp_v4_is_ce,
.seq_dump_addr = sctp_v4_seq_dump_addr,
.ecn_capable = sctp_v4_ecn_capable,
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
` (3 preceding siblings ...)
2022-11-13 16:44 ` [PATCH net-next 4/7] sctp: add skb_sdif in struct sctp_af Xin Long
@ 2022-11-13 16:44 ` Xin Long
2022-11-13 20:14 ` kernel test robot
2022-11-13 16:44 ` [PATCH net-next 6/7] sctp: add sysctl net.sctp.l3mdev_accept Xin Long
2022-11-13 16:44 ` [PATCH net-next 7/7] selftests: add a selftest for sctp vrf Xin Long
6 siblings, 1 reply; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
This patch at first adds a pernet global l3mdev_accept to decide if it
accepts the packets from a l3mdev when a SCTP socket doesn't bind to
any interface. It's set to 1 to avoid any possible incompatible issue,
and in next patch, a sysctl will be introduced to allow to change it.
Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is
added to check either dif or sdif is equal to sk_bound_dev_if, and to
check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set.
This function is used to match a association or a endpoint, namely
called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match().
All functions that needs updating are:
sctp_rcv():
asoc:
__sctp_rcv_lookup()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
__sctp_rcv_lookup_harder()
__sctp_rcv_init_lookup()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
__sctp_rcv_walk_lookup()
__sctp_rcv_asconf_lookup()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
ep:
__sctp_rcv_lookup_endpoint() -> sctp_endpoint_is_match()
sctp_connect():
sctp_endpoint_is_peeled_off()
__sctp_lookup_association()
sctp_has_association()
sctp_lookup_association()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
sctp_diag_dump_one():
sctp_transport_lookup_process() -> sctp_addrs_lookup_transport()
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/netns/sctp.h | 4 ++
include/net/sctp/sctp.h | 16 ++++++-
include/net/sctp/structs.h | 8 ++--
net/sctp/diag.c | 3 +-
net/sctp/endpointola.c | 13 +++--
net/sctp/input.c | 98 +++++++++++++++++++-------------------
net/sctp/protocol.c | 4 ++
net/sctp/socket.c | 4 +-
8 files changed, 89 insertions(+), 61 deletions(-)
diff --git a/include/net/netns/sctp.h b/include/net/netns/sctp.h
index a681147aecd8..7eff3d981b89 100644
--- a/include/net/netns/sctp.h
+++ b/include/net/netns/sctp.h
@@ -175,6 +175,10 @@ struct netns_sctp {
/* Threshold for autoclose timeout, in seconds. */
unsigned long max_autoclose;
+
+#ifdef CONFIG_NET_L3_MASTER_DEV
+ int l3mdev_accept;
+#endif
};
#endif /* __NETNS_SCTP_H__ */
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index a04999ee99b0..4d36846e8845 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -114,7 +114,7 @@ struct sctp_transport *sctp_transport_get_idx(struct net *net,
struct rhashtable_iter *iter, int pos);
int sctp_transport_lookup_process(sctp_callback_t cb, struct net *net,
const union sctp_addr *laddr,
- const union sctp_addr *paddr, void *p);
+ const union sctp_addr *paddr, void *p, int dif);
int sctp_transport_traverse_process(sctp_callback_t cb, sctp_callback_t cb_done,
struct net *net, int *pos, void *p);
int sctp_for_each_endpoint(int (*cb)(struct sctp_endpoint *, void *), void *p);
@@ -162,7 +162,8 @@ void sctp_unhash_transport(struct sctp_transport *t);
struct sctp_transport *sctp_addrs_lookup_transport(
struct net *net,
const union sctp_addr *laddr,
- const union sctp_addr *paddr);
+ const union sctp_addr *paddr,
+ int dif, int sdif);
struct sctp_transport *sctp_epaddr_lookup_transport(
const struct sctp_endpoint *ep,
const union sctp_addr *paddr);
@@ -676,4 +677,15 @@ static inline void sctp_sock_set_nodelay(struct sock *sk)
release_sock(sk);
}
+static inline bool sctp_sk_bound_dev_eq(struct net *net, int bound_dev_if,
+ int dif, int sdif)
+{
+ bool l3mdev_accept = true;
+
+#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
+ l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
+#endif
+ return inet_bound_dev_eq(l3mdev_accept, bound_dev_if, dif, sdif);
+}
+
#endif /* __net_sctp_h__ */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 7b4884c63b26..afa3781e3ca2 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1379,10 +1379,12 @@ struct sctp_association *sctp_endpoint_lookup_assoc(
struct sctp_transport **);
bool sctp_endpoint_is_peeled_off(struct sctp_endpoint *ep,
const union sctp_addr *paddr);
-struct sctp_endpoint *sctp_endpoint_is_match(struct sctp_endpoint *,
- struct net *, const union sctp_addr *);
+struct sctp_endpoint *sctp_endpoint_is_match(struct sctp_endpoint *ep,
+ struct net *net,
+ const union sctp_addr *laddr,
+ int dif, int sdif);
bool sctp_has_association(struct net *net, const union sctp_addr *laddr,
- const union sctp_addr *paddr);
+ const union sctp_addr *paddr, int dif, int sdif);
int sctp_verify_init(struct net *net, const struct sctp_endpoint *ep,
const struct sctp_association *asoc,
diff --git a/net/sctp/diag.c b/net/sctp/diag.c
index d9c6d8f30f09..a557009e9832 100644
--- a/net/sctp/diag.c
+++ b/net/sctp/diag.c
@@ -426,6 +426,7 @@ static int sctp_diag_dump_one(struct netlink_callback *cb,
struct net *net = sock_net(skb->sk);
const struct nlmsghdr *nlh = cb->nlh;
union sctp_addr laddr, paddr;
+ int dif = req->id.idiag_if;
struct sctp_comm_param commp = {
.skb = skb,
.r = req,
@@ -454,7 +455,7 @@ static int sctp_diag_dump_one(struct netlink_callback *cb,
}
return sctp_transport_lookup_process(sctp_sock_dump_one,
- net, &laddr, &paddr, &commp);
+ net, &laddr, &paddr, &commp, dif);
}
static void sctp_diag_dump(struct sk_buff *skb, struct netlink_callback *cb,
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index efffde7f2328..7e77b450697c 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -246,12 +246,15 @@ void sctp_endpoint_put(struct sctp_endpoint *ep)
/* Is this the endpoint we are looking for? */
struct sctp_endpoint *sctp_endpoint_is_match(struct sctp_endpoint *ep,
struct net *net,
- const union sctp_addr *laddr)
+ const union sctp_addr *laddr,
+ int dif, int sdif)
{
+ int bound_dev_if = READ_ONCE(ep->base.sk->sk_bound_dev_if);
struct sctp_endpoint *retval = NULL;
- if ((htons(ep->base.bind_addr.port) == laddr->v4.sin_port) &&
- net_eq(ep->base.net, net)) {
+ if (net_eq(ep->base.net, net) &&
+ sctp_sk_bound_dev_eq(net, bound_dev_if, dif, sdif) &&
+ (htons(ep->base.bind_addr.port) == laddr->v4.sin_port)) {
if (sctp_bind_addr_match(&ep->base.bind_addr, laddr,
sctp_sk(ep->base.sk)))
retval = ep;
@@ -298,6 +301,7 @@ struct sctp_association *sctp_endpoint_lookup_assoc(
bool sctp_endpoint_is_peeled_off(struct sctp_endpoint *ep,
const union sctp_addr *paddr)
{
+ int bound_dev_if = READ_ONCE(ep->base.sk->sk_bound_dev_if);
struct sctp_sockaddr_entry *addr;
struct net *net = ep->base.net;
struct sctp_bind_addr *bp;
@@ -307,7 +311,8 @@ bool sctp_endpoint_is_peeled_off(struct sctp_endpoint *ep,
* so the address_list can not change.
*/
list_for_each_entry(addr, &bp->address_list, list) {
- if (sctp_has_association(net, &addr->a, paddr))
+ if (sctp_has_association(net, &addr->a, paddr,
+ bound_dev_if, bound_dev_if))
return true;
}
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 4f43afa8678f..17bf7252976e 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -50,16 +50,19 @@ static struct sctp_association *__sctp_rcv_lookup(struct net *net,
struct sk_buff *skb,
const union sctp_addr *paddr,
const union sctp_addr *laddr,
- struct sctp_transport **transportp);
+ struct sctp_transport **transportp,
+ int dif, int sdif);
static struct sctp_endpoint *__sctp_rcv_lookup_endpoint(
struct net *net, struct sk_buff *skb,
const union sctp_addr *laddr,
- const union sctp_addr *daddr);
+ const union sctp_addr *daddr,
+ int dif, int sdif);
static struct sctp_association *__sctp_lookup_association(
struct net *net,
const union sctp_addr *local,
const union sctp_addr *peer,
- struct sctp_transport **pt);
+ struct sctp_transport **pt,
+ int dif, int sdif);
static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
@@ -92,11 +95,11 @@ int sctp_rcv(struct sk_buff *skb)
struct sctp_chunk *chunk;
union sctp_addr src;
union sctp_addr dest;
- int bound_dev_if;
int family;
struct sctp_af *af;
struct net *net = dev_net(skb->dev);
bool is_gso = skb_is_gso(skb) && skb_is_gso_sctp(skb);
+ int dif, sdif;
if (skb->pkt_type != PACKET_HOST)
goto discard_it;
@@ -141,6 +144,8 @@ int sctp_rcv(struct sk_buff *skb)
/* Initialize local addresses for lookups. */
af->from_skb(&src, skb, 1);
af->from_skb(&dest, skb, 0);
+ dif = af->skb_iif(skb);
+ sdif = af->skb_sdif(skb);
/* If the packet is to or from a non-unicast address,
* silently discard the packet.
@@ -157,35 +162,15 @@ int sctp_rcv(struct sk_buff *skb)
!af->addr_valid(&dest, NULL, skb))
goto discard_it;
- asoc = __sctp_rcv_lookup(net, skb, &src, &dest, &transport);
+ asoc = __sctp_rcv_lookup(net, skb, &src, &dest, &transport, dif, sdif);
if (!asoc)
- ep = __sctp_rcv_lookup_endpoint(net, skb, &dest, &src);
+ ep = __sctp_rcv_lookup_endpoint(net, skb, &dest, &src, dif, sdif);
/* Retrieve the common input handling substructure. */
rcvr = asoc ? &asoc->base : &ep->base;
sk = rcvr->sk;
- /*
- * If a frame arrives on an interface and the receiving socket is
- * bound to another interface, via SO_BINDTODEVICE, treat it as OOTB
- */
- bound_dev_if = READ_ONCE(sk->sk_bound_dev_if);
- if (bound_dev_if && (bound_dev_if != af->skb_iif(skb))) {
- if (transport) {
- sctp_transport_put(transport);
- asoc = NULL;
- transport = NULL;
- } else {
- sctp_endpoint_put(ep);
- ep = NULL;
- }
- sk = net->sctp.ctl_sock;
- ep = sctp_sk(sk)->ep;
- sctp_endpoint_hold(ep);
- rcvr = &ep->base;
- }
-
/*
* RFC 2960, 8.4 - Handle "Out of the blue" Packets.
* An SCTP packet is called an "out of the blue" (OOTB)
@@ -485,6 +470,8 @@ struct sock *sctp_err_lookup(struct net *net, int family, struct sk_buff *skb,
struct sctp_association *asoc;
struct sctp_transport *transport = NULL;
__u32 vtag = ntohl(sctphdr->vtag);
+ int sdif = inet_sdif(skb);
+ int dif = inet_iif(skb);
*app = NULL; *tpp = NULL;
@@ -500,7 +487,7 @@ struct sock *sctp_err_lookup(struct net *net, int family, struct sk_buff *skb,
/* Look for an association that matches the incoming ICMP error
* packet.
*/
- asoc = __sctp_lookup_association(net, &saddr, &daddr, &transport);
+ asoc = __sctp_lookup_association(net, &saddr, &daddr, &transport, dif, sdif);
if (!asoc)
return NULL;
@@ -850,7 +837,8 @@ static inline __u32 sctp_hashfn(const struct net *net, __be16 lport,
static struct sctp_endpoint *__sctp_rcv_lookup_endpoint(
struct net *net, struct sk_buff *skb,
const union sctp_addr *laddr,
- const union sctp_addr *paddr)
+ const union sctp_addr *paddr,
+ int dif, int sdif)
{
struct sctp_hashbucket *head;
struct sctp_endpoint *ep;
@@ -863,7 +851,7 @@ static struct sctp_endpoint *__sctp_rcv_lookup_endpoint(
head = &sctp_ep_hashtable[hash];
read_lock(&head->lock);
sctp_for_each_hentry(ep, &head->chain) {
- if (sctp_endpoint_is_match(ep, net, laddr))
+ if (sctp_endpoint_is_match(ep, net, laddr, dif, sdif))
goto hit;
}
@@ -994,10 +982,12 @@ void sctp_unhash_transport(struct sctp_transport *t)
struct sctp_transport *sctp_addrs_lookup_transport(
struct net *net,
const union sctp_addr *laddr,
- const union sctp_addr *paddr)
+ const union sctp_addr *paddr,
+ int dif, int sdif)
{
struct rhlist_head *tmp, *list;
struct sctp_transport *t;
+ int bound_dev_if;
struct sctp_hash_cmp_arg arg = {
.paddr = paddr,
.net = net,
@@ -1011,7 +1001,9 @@ struct sctp_transport *sctp_addrs_lookup_transport(
if (!sctp_transport_hold(t))
continue;
- if (sctp_bind_addr_match(&t->asoc->base.bind_addr,
+ bound_dev_if = READ_ONCE(t->asoc->base.sk->sk_bound_dev_if);
+ if (sctp_sk_bound_dev_eq(net, bound_dev_if, dif, sdif) &&
+ sctp_bind_addr_match(&t->asoc->base.bind_addr,
laddr, sctp_sk(t->asoc->base.sk)))
return t;
sctp_transport_put(t);
@@ -1048,12 +1040,13 @@ static struct sctp_association *__sctp_lookup_association(
struct net *net,
const union sctp_addr *local,
const union sctp_addr *peer,
- struct sctp_transport **pt)
+ struct sctp_transport **pt,
+ int dif, int sdif)
{
struct sctp_transport *t;
struct sctp_association *asoc = NULL;
- t = sctp_addrs_lookup_transport(net, local, peer);
+ t = sctp_addrs_lookup_transport(net, local, peer, dif, sdif);
if (!t)
goto out;
@@ -1069,12 +1062,13 @@ static
struct sctp_association *sctp_lookup_association(struct net *net,
const union sctp_addr *laddr,
const union sctp_addr *paddr,
- struct sctp_transport **transportp)
+ struct sctp_transport **transportp,
+ int dif, int sdif)
{
struct sctp_association *asoc;
rcu_read_lock();
- asoc = __sctp_lookup_association(net, laddr, paddr, transportp);
+ asoc = __sctp_lookup_association(net, laddr, paddr, transportp, dif, sdif);
rcu_read_unlock();
return asoc;
@@ -1083,11 +1077,12 @@ struct sctp_association *sctp_lookup_association(struct net *net,
/* Is there an association matching the given local and peer addresses? */
bool sctp_has_association(struct net *net,
const union sctp_addr *laddr,
- const union sctp_addr *paddr)
+ const union sctp_addr *paddr,
+ int dif, int sdif)
{
struct sctp_transport *transport;
- if (sctp_lookup_association(net, laddr, paddr, &transport)) {
+ if (sctp_lookup_association(net, laddr, paddr, &transport, dif, sdif)) {
sctp_transport_put(transport);
return true;
}
@@ -1115,7 +1110,8 @@ bool sctp_has_association(struct net *net,
*/
static struct sctp_association *__sctp_rcv_init_lookup(struct net *net,
struct sk_buff *skb,
- const union sctp_addr *laddr, struct sctp_transport **transportp)
+ const union sctp_addr *laddr, struct sctp_transport **transportp,
+ int dif, int sdif)
{
struct sctp_association *asoc;
union sctp_addr addr;
@@ -1154,7 +1150,7 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net,
if (!af->from_addr_param(paddr, params.addr, sh->source, 0))
continue;
- asoc = __sctp_lookup_association(net, laddr, paddr, transportp);
+ asoc = __sctp_lookup_association(net, laddr, paddr, transportp, dif, sdif);
if (asoc)
return asoc;
}
@@ -1181,7 +1177,8 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
struct sctp_chunkhdr *ch,
const union sctp_addr *laddr,
__be16 peer_port,
- struct sctp_transport **transportp)
+ struct sctp_transport **transportp,
+ int dif, int sdif)
{
struct sctp_addip_chunk *asconf = (struct sctp_addip_chunk *)ch;
struct sctp_af *af;
@@ -1201,7 +1198,7 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
if (!af->from_addr_param(&paddr, param, peer_port, 0))
return NULL;
- return __sctp_lookup_association(net, laddr, &paddr, transportp);
+ return __sctp_lookup_association(net, laddr, &paddr, transportp, dif, sdif);
}
@@ -1217,7 +1214,8 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
struct sk_buff *skb,
const union sctp_addr *laddr,
- struct sctp_transport **transportp)
+ struct sctp_transport **transportp,
+ int dif, int sdif)
{
struct sctp_association *asoc = NULL;
struct sctp_chunkhdr *ch;
@@ -1260,7 +1258,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
asoc = __sctp_rcv_asconf_lookup(
net, ch, laddr,
sctp_hdr(skb)->source,
- transportp);
+ transportp, dif, sdif);
break;
default:
break;
@@ -1285,7 +1283,8 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
static struct sctp_association *__sctp_rcv_lookup_harder(struct net *net,
struct sk_buff *skb,
const union sctp_addr *laddr,
- struct sctp_transport **transportp)
+ struct sctp_transport **transportp,
+ int dif, int sdif)
{
struct sctp_chunkhdr *ch;
@@ -1309,9 +1308,9 @@ static struct sctp_association *__sctp_rcv_lookup_harder(struct net *net,
/* If this is INIT/INIT-ACK look inside the chunk too. */
if (ch->type == SCTP_CID_INIT || ch->type == SCTP_CID_INIT_ACK)
- return __sctp_rcv_init_lookup(net, skb, laddr, transportp);
+ return __sctp_rcv_init_lookup(net, skb, laddr, transportp, dif, sdif);
- return __sctp_rcv_walk_lookup(net, skb, laddr, transportp);
+ return __sctp_rcv_walk_lookup(net, skb, laddr, transportp, dif, sdif);
}
/* Lookup an association for an inbound skb. */
@@ -1319,11 +1318,12 @@ static struct sctp_association *__sctp_rcv_lookup(struct net *net,
struct sk_buff *skb,
const union sctp_addr *paddr,
const union sctp_addr *laddr,
- struct sctp_transport **transportp)
+ struct sctp_transport **transportp,
+ int dif, int sdif)
{
struct sctp_association *asoc;
- asoc = __sctp_lookup_association(net, laddr, paddr, transportp);
+ asoc = __sctp_lookup_association(net, laddr, paddr, transportp, dif, sdif);
if (asoc)
goto out;
@@ -1331,7 +1331,7 @@ static struct sctp_association *__sctp_rcv_lookup(struct net *net,
* SCTP Implementors Guide, 2.18 Handling of address
* parameters within the INIT or INIT-ACK.
*/
- asoc = __sctp_rcv_lookup_harder(net, skb, laddr, transportp);
+ asoc = __sctp_rcv_lookup_harder(net, skb, laddr, transportp, dif, sdif);
if (asoc)
goto out;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index a18cf0471a8d..909a89a1cff4 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1394,6 +1394,10 @@ static int __net_init sctp_defaults_init(struct net *net)
/* Initialize maximum autoclose timeout. */
net->sctp.max_autoclose = INT_MAX / HZ;
+#ifdef CONFIG_NET_L3_MASTER_DEV
+ net->sctp.l3mdev_accept = 1;
+#endif
+
status = sctp_sysctl_net_register(net);
if (status)
goto err_sysctl_register;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 4306164238ef..5acbdf0d38f3 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5315,14 +5315,14 @@ EXPORT_SYMBOL_GPL(sctp_for_each_endpoint);
int sctp_transport_lookup_process(sctp_callback_t cb, struct net *net,
const union sctp_addr *laddr,
- const union sctp_addr *paddr, void *p)
+ const union sctp_addr *paddr, void *p, int dif)
{
struct sctp_transport *transport;
struct sctp_endpoint *ep;
int err = -ENOENT;
rcu_read_lock();
- transport = sctp_addrs_lookup_transport(net, laddr, paddr);
+ transport = sctp_addrs_lookup_transport(net, laddr, paddr, dif, dif);
if (!transport) {
rcu_read_unlock();
return err;
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH net-next 6/7] sctp: add sysctl net.sctp.l3mdev_accept
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
` (4 preceding siblings ...)
2022-11-13 16:44 ` [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup Xin Long
@ 2022-11-13 16:44 ` Xin Long
2022-11-13 16:44 ` [PATCH net-next 7/7] selftests: add a selftest for sctp vrf Xin Long
6 siblings, 0 replies; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
This patch is to add sysctl net.sctp.l3mdev_accept to allow
users to change the pernet global l3mdev_accept.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
Documentation/networking/ip-sysctl.rst | 9 +++++++++
net/sctp/sysctl.c | 11 +++++++++++
2 files changed, 20 insertions(+)
diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 815efc89ad73..096ed1a82cbc 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -3100,6 +3100,15 @@ ecn_enable - BOOLEAN
Default: 1
+l3mdev_accept - BOOLEAN
+ Enabling this option allows a "global" bound socket to work
+ across L3 master domains (e.g., VRFs) with packets capable of
+ being received regardless of the L3 domain in which they
+ originated. Only valid when the kernel was compiled with
+ CONFIG_NET_L3_MASTER_DEV.
+
+ Default: 1 (enabled)
+
``/proc/sys/net/core/*``
========================
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index b46a416787ec..7f40ed117fc7 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -347,6 +347,17 @@ static struct ctl_table sctp_net_table[] = {
.extra1 = &max_autoclose_min,
.extra2 = &max_autoclose_max,
},
+#ifdef CONFIG_NET_L3_MASTER_DEV
+ {
+ .procname = "l3mdev_accept",
+ .data = &init_net.sctp.l3mdev_accept,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = SYSCTL_ZERO,
+ .extra2 = SYSCTL_ONE,
+ },
+#endif
{
.procname = "pf_enable",
.data = &init_net.sctp.pf_enable,
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH net-next 7/7] selftests: add a selftest for sctp vrf
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
` (5 preceding siblings ...)
2022-11-13 16:44 ` [PATCH net-next 6/7] sctp: add sysctl net.sctp.l3mdev_accept Xin Long
@ 2022-11-13 16:44 ` Xin Long
2022-11-15 10:29 ` Paolo Abeni
6 siblings, 1 reply; 16+ messages in thread
From: Xin Long @ 2022-11-13 16:44 UTC (permalink / raw)
To: network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner,
Neil Horman, David Ahern, Carlo Carraro
This patch adds 12 small test cases: 01-04 test for the sysctl
net.sctp.l3mdev_accept. 05-10 test for only binding to a right
l3mdev device, the connection can be created. 11-12 test for
two socks binding to different l3mdev devices at the same time,
each of them can process the packets from the corresponding
peer. The tests run for both IPv4 and IPv6 SCTP.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
tools/testing/selftests/net/Makefile | 2 +
tools/testing/selftests/net/sctp_hello.c | 139 ++++++++++++++++++++
tools/testing/selftests/net/sctp_vrf.sh | 160 +++++++++++++++++++++++
3 files changed, 301 insertions(+)
create mode 100644 tools/testing/selftests/net/sctp_hello.c
create mode 100755 tools/testing/selftests/net/sctp_vrf.sh
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index cec4800cb017..880e6ded6ed5 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -72,6 +72,8 @@ TEST_GEN_PROGS += sk_bind_sendto_listen
TEST_GEN_PROGS += sk_connect_zero_addr
TEST_PROGS += test_ingress_egress_chaining.sh
TEST_GEN_PROGS += so_incoming_cpu
+TEST_PROGS += sctp_vrf.sh
+TEST_GEN_FILES += sctp_hello
TEST_FILES := settings
diff --git a/tools/testing/selftests/net/sctp_hello.c b/tools/testing/selftests/net/sctp_hello.c
new file mode 100644
index 000000000000..58f763ca8b47
--- /dev/null
+++ b/tools/testing/selftests/net/sctp_hello.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+
+static void set_addr(struct sockaddr_storage *ss, char *ip, char *port, int *len)
+{
+ if (ss->ss_family == AF_INET) {
+ struct sockaddr_in *a = (struct sockaddr_in *)ss;
+
+ a->sin_addr.s_addr = inet_addr(ip);
+ a->sin_port = htons(atoi(port));
+ *len = sizeof(*a);
+ } else {
+ struct sockaddr_in6 *a = (struct sockaddr_in6 *)ss;
+
+ a->sin6_family = AF_INET6;
+ inet_pton(AF_INET6, ip, &a->sin6_addr);
+ a->sin6_port = htons(atoi(port));
+ *len = sizeof(*a);
+ }
+}
+
+static int do_client(int argc, char *argv[])
+{
+ struct sockaddr_storage ss;
+ char buf[] = "hello";
+ int csk, ret, len;
+
+ if (argc < 5) {
+ printf("%s client -4|6 IP PORT [IP PORT]\n", argv[0]);
+ return -1;
+ }
+
+ bzero((void *)&ss, sizeof(ss));
+ ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
+ csk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
+ if (csk < 0) {
+ printf("failed to create socket\n");
+ return -1;
+ }
+
+ if (argc >= 7) {
+ set_addr(&ss, argv[5], argv[6], &len);
+ ret = bind(csk, (struct sockaddr *)&ss, len);
+ if (ret < 0) {
+ printf("failed to bind to address\n");
+ return -1;
+ }
+ }
+
+ set_addr(&ss, argv[3], argv[4], &len);
+ ret = connect(csk, (struct sockaddr *)&ss, len);
+ if (ret < 0) {
+ printf("failed to connect to peer\n");
+ return -1;
+ }
+
+ ret = send(csk, buf, strlen(buf) + 1, 0);
+ if (ret < 0) {
+ printf("failed to send msg %d\n", ret);
+ return -1;
+ }
+ sleep(1);
+ close(csk);
+
+ return 0;
+}
+
+int main(int argc, char *argv[])
+{
+ struct sockaddr_storage ss;
+ int lsk, csk, ret, len;
+ char buf[20];
+
+ if (argc < 2 || (strcmp(argv[1], "server") && strcmp(argv[1], "client"))) {
+ printf("%s server|client ...\n", argv[0]);
+ return -1;
+ }
+
+ if (!strcmp(argv[1], "client"))
+ return do_client(argc, argv);
+
+ if (argc < 5) {
+ printf("%s server -4|6 IP PORT [IFACE]\n", argv[0]);
+ return -1;
+ }
+
+ ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
+ lsk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
+ if (lsk < 0) {
+ printf("failed to create lsk\n");
+ return -1;
+ }
+
+ if (argc >= 6) {
+ ret = setsockopt(lsk, SOL_SOCKET, SO_BINDTODEVICE,
+ argv[5], strlen(argv[5]) + 1);
+ if (ret < 0) {
+ printf("failed to bind to device\n");
+ return -1;
+ }
+ }
+
+ set_addr(&ss, argv[3], argv[4], &len);
+ ret = bind(lsk, (struct sockaddr *)&ss, len);
+ if (ret < 0) {
+ printf("failed to bind to address\n");
+ return -1;
+ }
+
+ ret = listen(lsk, 5);
+ if (ret < 0) {
+ printf("failed to listen on port\n");
+ return -1;
+ }
+
+ csk = accept(lsk, (struct sockaddr *)NULL, (socklen_t *)NULL);
+ if (csk < 0) {
+ printf("failed to accept new client\n");
+ return -1;
+ }
+
+ ret = recv(csk, buf, sizeof(buf), 0);
+ if (ret <= 0) {
+ printf("failed to recv msg %d\n", ret);
+ return -1;
+ }
+ sleep(2);
+ close(csk);
+ close(lsk);
+
+ return 0;
+}
diff --git a/tools/testing/selftests/net/sctp_vrf.sh b/tools/testing/selftests/net/sctp_vrf.sh
new file mode 100755
index 000000000000..310749f58386
--- /dev/null
+++ b/tools/testing/selftests/net/sctp_vrf.sh
@@ -0,0 +1,160 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Testing For SCTP VRF.
+# TOPO: CLIENT_NS1 (veth1) <---> (veth1) -> vrf_s1
+# SERVER_NS
+# CLIENT_NS2 (veth1) <---> (veth2) -> vrf_s2
+
+CLIENT_NS1="client-ns1"
+CLIENT_NS2="client-ns2"
+CLIENT_IP4="10.0.0.1"
+CLIENT_IP6="2000::1"
+CLIENT_PORT=1234
+
+SERVER_NS="server-ns"
+SERVER_IP4="10.0.0.2"
+SERVER_IP6="2000::2"
+SERVER_PORT=1234
+
+setup() {
+ modprobe sctp
+ ip netns add $CLIENT_NS1
+ ip netns add $CLIENT_NS2
+ ip netns add $SERVER_NS
+ ip -n $SERVER_NS link add veth1 type veth peer name veth1 netns $CLIENT_NS1
+ ip -n $SERVER_NS link add veth2 type veth peer name veth1 netns $CLIENT_NS2
+
+ ip -n $CLIENT_NS1 link set veth1 up
+ ip -n $CLIENT_NS1 addr add $CLIENT_IP4/24 dev veth1
+ ip -n $CLIENT_NS1 addr add $CLIENT_IP6/24 dev veth1
+
+ ip -n $CLIENT_NS2 link set veth1 up
+ ip -n $CLIENT_NS2 addr add $CLIENT_IP4/24 dev veth1
+ ip -n $CLIENT_NS2 addr add $CLIENT_IP6/24 dev veth1
+
+ ip -n $SERVER_NS link add dummy1 type dummy
+ ip -n $SERVER_NS link set dummy1 up
+ ip -n $SERVER_NS link add vrf-1 type vrf table 10
+ ip -n $SERVER_NS link add vrf-2 type vrf table 20
+ ip -n $SERVER_NS link set vrf-1 up
+ ip -n $SERVER_NS link set vrf-2 up
+ ip -n $SERVER_NS link set veth1 master vrf-1
+ ip -n $SERVER_NS link set veth2 master vrf-2
+
+ ip -n $SERVER_NS addr add $SERVER_IP4/24 dev dummy1
+ ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth1
+ ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth2
+ ip -n $SERVER_NS addr add $SERVER_IP6/24 dev dummy1
+ ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth1
+ ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth2
+
+ ip -n $SERVER_NS link set veth1 up
+ ip -n $SERVER_NS link set veth2 up
+ sleep 3
+ ip -n $SERVER_NS route add table 10 $CLIENT_IP4 dev veth1 src $SERVER_IP4
+ ip -n $SERVER_NS route add table 20 $CLIENT_IP4 dev veth2 src $SERVER_IP4
+ ip -n $SERVER_NS route add $CLIENT_IP4 dev veth1 src $SERVER_IP4
+ ip -n $SERVER_NS route add table 10 $CLIENT_IP6 dev veth1 src $SERVER_IP6
+ ip -n $SERVER_NS route add table 20 $CLIENT_IP6 dev veth2 src $SERVER_IP6
+ ip -n $SERVER_NS route add $CLIENT_IP6 dev veth1 src $SERVER_IP6
+
+ L3MDEV=`ip netns exec $SERVER_NS cat /proc/sys/net/sctp/l3mdev_accept`
+}
+
+cleanup() {
+ ip netns exec $SERVER_NS echo $L3MDEV > /proc/sys/net/sctp/l3mdev_accept
+ ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
+ ip netns del "$CLIENT_NS1"
+ ip netns del "$CLIENT_NS2"
+ ip netns del "$SERVER_NS"
+}
+
+do_testx() {
+ IFACE1=$1
+ IFACE2=$2
+
+ ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
+ ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
+ $SERVER_PORT $IFACE1 2>&1 >/dev/null &
+ disown
+ ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
+ $SERVER_PORT $IFACE2 2>&1 >/dev/null &
+ disown
+ sleep 1
+ timeout 3 ip netns exec $CLIENT_NS1 ./sctp_hello client $AF \
+ $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null && \
+ timeout 3 ip netns exec $CLIENT_NS2 ./sctp_hello client $AF \
+ $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
+}
+
+do_test() {
+ CLIENT_NS=$1
+ IFACE=$2
+
+ ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
+ ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
+ $SERVER_PORT $IFACE 2>&1 >/dev/null &
+ disown
+ sleep 1
+ timeout 3 ip netns exec $CLIENT_NS ./sctp_hello client $AF \
+ $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
+}
+
+testup() {
+ ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=1 2>&1 >/dev/null
+ echo -n "TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y "
+ do_test $CLIENT_NS1 || { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 02: nobind, connect from client 2, l3mdev_accept=1, N "
+ do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=0 2>&1 >/dev/null
+ echo -n "TEST 03: nobind, connect from client 1, l3mdev_accept=0, N "
+ do_test $CLIENT_NS1 && { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 04: nobind, connect from client 2, l3mdev_accept=0, N "
+ do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 05: bind veth2 in server, connect from client 1, N "
+ do_test $CLIENT_NS1 veth2 && { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 06: bind veth1 in server, connect from client 1, Y "
+ do_test $CLIENT_NS1 veth1 || { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 07: bind vrf-1 in server, connect from client 1, Y "
+ do_test $CLIENT_NS1 vrf-1 || { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 08: bind vrf-2 in server, connect from client 1, N "
+ do_test $CLIENT_NS1 vrf-2 && { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 09: bind vrf-2 in server, connect from client 2, Y "
+ do_test $CLIENT_NS2 vrf-2 || { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 10: bind vrf-1 in server, connect from client 2, N "
+ do_test $CLIENT_NS2 vrf-1 && { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 11: bind vrf-1 & 2 in server, connect from client 1 & 2, Y "
+ do_testx vrf-1 vrf-2 || { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+
+ echo -n "TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N "
+ do_testx vrf-2 vrf-1 || { echo "[FAIL]"; return 1; }
+ echo "[PASS]"
+}
+
+trap cleanup EXIT
+setup || exit $?
+echo "Testing For SCTP VRF:"
+CLIENT_IP=$CLIENT_IP4 SERVER_IP=$SERVER_IP4 AF="-4" testup && echo "***v4 Tests Done***" &&
+CLIENT_IP=$CLIENT_IP6 SERVER_IP=$SERVER_IP6 AF="-6" testup && echo "***v6 Tests Done***"
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
2022-11-13 16:44 ` [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup Xin Long
@ 2022-11-13 20:14 ` kernel test robot
2022-11-15 2:38 ` Xin Long
0 siblings, 1 reply; 16+ messages in thread
From: kernel test robot @ 2022-11-13 20:14 UTC (permalink / raw)
To: Xin Long, network dev, linux-sctp
Cc: llvm, oe-kbuild-all, davem, kuba, Eric Dumazet, Paolo Abeni,
Marcelo Ricardo Leitner, Neil Horman, David Ahern, Carlo Carraro
[-- Attachment #1: Type: text/plain, Size: 12375 bytes --]
Hi Xin,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on net-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/Xin-Long/sctp-support-vrf-processing/20221114-004540
patch link: https://lore.kernel.org/r/86dfdc49613ca8a8a6a3d7c7cf2e7bd8207338f2.1668357542.git.lucien.xin%40gmail.com
patch subject: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
config: arm-randconfig-r034-20221114
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 463da45892e2d2a262277b91b96f5f8c05dc25d0)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm cross compiling tool for clang build
# apt-get install binutils-arm-linux-gnueabi
# https://github.com/intel-lab-lkp/linux/commit/6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Xin-Long/sctp-support-vrf-processing/20221114-004540
git checkout 6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm SHELL=/bin/bash net/openvswitch/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
compiletime_assert_rwonce_type(x); \
^
include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
include/linux/compiler_types.h:324:10: note: expanded from macro '__native_word'
(sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || \
^
include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~
include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~
include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
compiletime_assert_rwonce_type(x); \
^
include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
include/linux/compiler_types.h:324:39: note: expanded from macro '__native_word'
(sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || \
^
include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~
include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~
include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
compiletime_assert_rwonce_type(x); \
^
include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
include/linux/compiler_types.h:325:10: note: expanded from macro '__native_word'
sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
^
include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~
include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~
include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
compiletime_assert_rwonce_type(x); \
^
include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
include/linux/compiler_types.h:325:38: note: expanded from macro '__native_word'
sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
^
include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~
include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~
include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
compiletime_assert_rwonce_type(x); \
^
include/asm-generic/rwonce.h:36:48: note: expanded from macro 'compiletime_assert_rwonce_type'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~
include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~
include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:50:14: note: expanded from macro 'READ_ONCE'
__READ_ONCE(x); \
^
include/asm-generic/rwonce.h:44:65: note: expanded from macro '__READ_ONCE'
#define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
^
include/linux/compiler_types.h:313:13: note: expanded from macro '__unqual_scalar_typeof'
_Generic((x), \
^
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:50:14: note: expanded from macro 'READ_ONCE'
__READ_ONCE(x); \
^
include/asm-generic/rwonce.h:44:65: note: expanded from macro '__READ_ONCE'
#define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
^
include/linux/compiler_types.h:320:15: note: expanded from macro '__unqual_scalar_typeof'
default: (x)))
^
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
~~~ ^
include/asm-generic/rwonce.h:50:14: note: expanded from macro 'READ_ONCE'
__READ_ONCE(x); \
^
include/asm-generic/rwonce.h:44:72: note: expanded from macro '__READ_ONCE'
#define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
^
In file included from net/openvswitch/actions.c:26:
In file included from include/net/sctp/checksum.h:27:
>> include/net/sctp/sctp.h:686:19: error: invalid argument type 'void' to unary expression
l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
9 errors generated.
vim +686 include/net/sctp/sctp.h
679
680 static inline bool sctp_sk_bound_dev_eq(struct net *net, int bound_dev_if,
681 int dif, int sdif)
682 {
683 bool l3mdev_accept = true;
684
685 #if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
> 686 l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
687 #endif
688 return inet_bound_dev_eq(l3mdev_accept, bound_dev_if, dif, sdif);
689 }
690
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 189513 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 463da45892e2d2a262277b91b96f5f8c05dc25d0)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=160000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=160000
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_TIME_KUNIT_TEST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_EMBED is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_ARM=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_PHYS_OFFSET=0
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2
#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=15
CONFIG_ARCH_MULTIPLATFORM=y
#
# Platform selection
#
#
# CPU Core family selection
#
CONFIG_ARCH_MULTI_V6=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MULTI_V6_V7=y
# end of Platform selection
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G5=y
# CONFIG_ARCH_BCM is not set
CONFIG_ARCH_MXC=y
CONFIG_MXC_AVIC=y
#
# ARM1136 platforms
#
# CONFIG_SOC_IMX31 is not set
CONFIG_SOC_IMX35=y
#
# TI OMAP/AM/DM/DRA Family
#
# CONFIG_ARCH_OMAP2 is not set
# end of TI OMAP/AM/DM/DRA Family
# CONFIG_ARCH_OXNAS is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
CONFIG_ARCH_VT8500=y
CONFIG_ARCH_WM8750=y
#
# Processor Type
#
CONFIG_CPU_V6K=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_32v6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_DCACHE_DISABLE=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
# CONFIG_PL310_ERRATA_588369 is not set
CONFIG_PL310_ERRATA_727915=y
CONFIG_PL310_ERRATA_753970=y
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_ARM_ERRATA_411920=y
# end of System Type
#
# Bus support
#
# end of Bus support
#
# Kernel Features
#
CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
CONFIG_IRQSTACKS=y
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VMSPLIT_2G=y
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_KASAN_SHADOW_OFFSET=0x5f000000
CONFIG_ARCH_NR_GPIO=1024
CONFIG_HZ_FIXED=0
# CONFIG_HZ_100 is not set
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_CPU_SW_DOMAIN_PAN=y
CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
# CONFIG_STACKPROTECTOR_PER_TASK is not set
# end of Kernel Features
#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_UNUSED_BOARD_FILES is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE=""
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
CONFIG_CRASH_DUMP=y
CONFIG_AUTO_ZRELADDR=y
# CONFIG_EFI is not set
# end of Boot options
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPU Power Management
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_VFP=y
# end of Floating point emulation
#
# Power management options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
# CONFIG_HIBERNATION_SNAPSHOT_DEV is not set
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_APM_EMULATION=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# end of Power management options
CONFIG_AS_VFP_VMRS_FPINST=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
# CONFIG_STRICT_KERNEL_RWX is not set
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_HAVE_ARCH_PFN_VALID=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lz4"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
CONFIG_ZSWAP_ZPOOL_DEFAULT="zsmalloc"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_COMPACTION is not set
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_KMAP_LOCAL=y
CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
# CONFIG_LRU_GEN_ENABLED is not set
CONFIG_LRU_GEN_STATS=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
CONFIG_TLS=y
# CONFIG_TLS_DEVICE is not set
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
CONFIG_BPFILTER=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
CONFIG_RDS=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
# CONFIG_TIPC_MEDIA_UDP is not set
# CONFIG_TIPC_CRYPTO is not set
# CONFIG_TIPC_DIAG is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_AR9331 is not set
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_HELLCREEK=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA_COMMON=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_OCELOT=y
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
CONFIG_NET_DSA_TAG_QCA=y
# CONFIG_NET_DSA_TAG_RTL4_A is not set
CONFIG_NET_DSA_TAG_RTL8_4=y
CONFIG_NET_DSA_TAG_RZN1_A5PSW=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_SJA1105=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_TAG_XRS700X=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_CBS is not set
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ=y
# CONFIG_DEFAULT_FQ_CODEL is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=y
# CONFIG_OPENVSWITCH_GRE is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=y
# CONFIG_QRTR_SMD is not set
# CONFIG_QRTR_TUN is not set
CONFIG_QRTR_MHI=y
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
# CONFIG_BPQETHER is not set
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
# CONFIG_YAM is not set
# end of AX.25 network device drivers
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_GPIO=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=y
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
CONFIG_NETDEV_ADDR_LIST_TEST=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
CONFIG_PCI_PASID=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_AARDVARK is not set
# CONFIG_PCIE_XILINX_NWL is not set
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_IXP4XX is not set
# CONFIG_PCI_TEGRA is not set
# CONFIG_PCI_RCAR_GEN2 is not set
# CONFIG_PCIE_RCAR_HOST is not set
# CONFIG_PCIE_RCAR_EP is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_XILINX_CPM is not set
# CONFIG_PCI_XGENE is not set
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCI_VERSATILE is not set
# CONFIG_PCIE_IPROC_PLATFORM is not set
# CONFIG_PCIE_IPROC_BCMA is not set
CONFIG_PCIE_ALTERA=y
# CONFIG_PCIE_ALTERA_MSI is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
# CONFIG_PCIE_ROCKCHIP_HOST is not set
# CONFIG_PCIE_ROCKCHIP_EP is not set
# CONFIG_PCIE_MEDIATEK is not set
# CONFIG_PCIE_MEDIATEK_GEN3 is not set
# CONFIG_PCIE_BRCMSTB is not set
# CONFIG_PCI_LOONGSON is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_APPLE is not set
# CONFIG_PCIE_MT7621 is not set
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCIE_DW_PLAT_EP is not set
# CONFIG_PCI_EXYNOS is not set
# CONFIG_PCI_IMX6 is not set
# CONFIG_PCIE_SPEAR13XX is not set
# CONFIG_PCI_KEYSTONE_HOST is not set
# CONFIG_PCI_KEYSTONE_EP is not set
# CONFIG_PCI_LAYERSCAPE is not set
CONFIG_PCI_LAYERSCAPE_EP=y
# CONFIG_PCI_HISI is not set
# CONFIG_PCIE_QCOM is not set
# CONFIG_PCIE_QCOM_EP is not set
# CONFIG_PCIE_ARMADA_8K is not set
# CONFIG_PCIE_ARTPEC6_HOST is not set
# CONFIG_PCIE_ARTPEC6_EP is not set
# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
# CONFIG_PCIE_INTEL_GW is not set
# CONFIG_PCIE_KEEMBAY_HOST is not set
# CONFIG_PCIE_KEEMBAY_EP is not set
# CONFIG_PCIE_KIRIN is not set
# CONFIG_PCIE_HISI_STB is not set
CONFIG_PCI_MESON=y
# CONFIG_PCIE_TEGRA194_HOST is not set
# CONFIG_PCIE_TEGRA194_EP is not set
# CONFIG_PCIE_VISCONTI_HOST is not set
# CONFIG_PCIE_UNIPHIER is not set
# CONFIG_PCIE_UNIPHIER_EP is not set
# CONFIG_PCIE_AL is not set
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_MOBIVEIL_PLAT is not set
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=y
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
# CONFIG_PCI_J721E_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
CONFIG_PCI_EPF_NTB=y
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers
CONFIG_CXL_BUS=y
# CONFIG_CXL_PCI is not set
CONFIG_CXL_PORT=y
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
# CONFIG_RAPIDIO_CHMAN is not set
CONFIG_RAPIDIO_MPORT_CDEV=y
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=y
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
# CONFIG_FW_CACHE is not set
CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
CONFIG_BRCMSTB_GISB_ARB=y
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
CONFIG_IMX_WEIM=y
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_VEXPRESS_CONFIG=y
# CONFIG_FSL_MC_BUS is not set
CONFIG_MHI_BUS=y
# CONFIG_MHI_BUS_DEBUG is not set
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices
# CONFIG_CONNECTOR is not set
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
CONFIG_GOOGLE_VPD=y
CONFIG_IMX_DSP=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
# CONFIG_GNSS_SIRF_SERIAL is not set
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_GNSS_USB=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HI6421V600_IRQ=y
CONFIG_HP_ILO=y
# CONFIG_QCOM_COINCELL is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_PCH_PHUB is not set
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
CONFIG_DW_XDATA_PCIE=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_ALTERA_STAPL is not set
CONFIG_ECHO=y
# CONFIG_BCM_VK is not set
CONFIG_MISC_ALCOR_PCI=y
CONFIG_MISC_RTSX_PCI=y
CONFIG_MISC_RTSX_USB=y
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
CONFIG_GP_PCI1XXXX=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_HISI_SAS is not set
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPI3MR=y
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_SCSI_MYRB=y
CONFIG_SCSI_MYRS=y
CONFIG_SCSI_SNIC=y
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_FDOMAIN=y
CONFIG_SCSI_FDOMAIN_PCI=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_QEDI is not set
CONFIG_SCSI_DC395x=y
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_WD719X=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_BRCM is not set
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
CONFIG_AHCI_DWC=y
# CONFIG_AHCI_ST is not set
CONFIG_AHCI_IMX=y
CONFIG_AHCI_CEVA=y
# CONFIG_AHCI_MTK is not set
# CONFIG_AHCI_MVEBU is not set
# CONFIG_AHCI_SUNXI is not set
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not set
CONFIG_AHCI_QORIQ=y
# CONFIG_SATA_FSL is not set
# CONFIG_SATA_GEMINI is not set
# CONFIG_SATA_AHCI_SEATTLE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_HIGHBANK is not set
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
# CONFIG_PATA_BK3710 is not set
CONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IMX=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_PXA is not set
CONFIG_PATA_WINBOND=y
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_IXP4XX_CF is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SAMSUNG_CF is not set
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_TCM_USER2=y
# CONFIG_LOOPBACK_TARGET is not set
CONFIG_ISCSI_TARGET=y
CONFIG_ISCSI_TARGET_CXGB4=y
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
CONFIG_MII=y
# CONFIG_NET_CORE is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
#
# Distributed Switch Architecture drivers
#
# CONFIG_B53 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
# CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
CONFIG_NET_DSA_MSCC_FELIX=y
CONFIG_NET_DSA_MSCC_SEVILLE=y
# CONFIG_NET_DSA_AR9331 is not set
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_XRS700X=y
CONFIG_NET_DSA_XRS700X_I2C=y
CONFIG_NET_DSA_XRS700X_MDIO=y
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_MDIO=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
# CONFIG_NET_DSA_REALTEK_RTL8366RB is not set
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
CONFIG_NET_DSA_VITESSE_VSC73XX=y
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ACTIONS is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=y
# CONFIG_NET_VENDOR_ALACRITECH is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=y
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_XGENE is not set
# CONFIG_NET_XGENE_V2 is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
# CONFIG_EMAC_ROCKCHIP is not set
# CONFIG_NET_VENDOR_ASIX is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
# CONFIG_ATL1 is not set
CONFIG_ATL1E=y
CONFIG_ATL1C=y
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCM4908_ENET is not set
CONFIG_BCMGENET=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BGMAC_PLATFORM is not set
CONFIG_SYSTEMPORT=y
# CONFIG_BNXT is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4_DCB=y
# CONFIG_CHELSIO_T4VF is not set
CONFIG_CHELSIO_LIB=y
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_CRYPTO_DEV_CHELSIO_TLS=y
CONFIG_CHELSIO_IPSEC_INLINE=y
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
# CONFIG_EP93XX_ETH is not set
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
CONFIG_DNET=y
# CONFIG_NET_VENDOR_DEC is not set
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=y
# CONFIG_BE2NET_HWMON is not set
CONFIG_BE2NET_BE2=y
# CONFIG_BE2NET_BE3 is not set
CONFIG_BE2NET_LANCER=y
# CONFIG_BE2NET_SKYHAWK is not set
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=y
# CONFIG_TSNEP_SELFTESTS is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=y
# CONFIG_FSL_FMAN is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
CONFIG_FSL_DPAA2_SWITCH=y
# CONFIG_FSL_ENETC is not set
CONFIG_FSL_ENETC_VF=y
CONFIG_FSL_ENETC_IERB=y
CONFIG_FSL_ENETC_MDIO=y
# CONFIG_FSL_ENETC_PTP_CLOCK is not set
CONFIG_FSL_ENETC_QOS=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
CONFIG_HISI_FEMAC=y
CONFIG_HIP04_ETH=y
# CONFIG_HI13X1_GMAC is not set
CONFIG_HNS_MDIO=y
CONFIG_HNS=y
# CONFIG_HNS_DSAF is not set
CONFIG_HNS_ENET=y
CONFIG_HNS3=y
# CONFIG_HNS3_HCLGE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
# CONFIG_IXGBE_IPSEC is not set
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
CONFIG_I40E_DCB=y
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
CONFIG_IGC=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_LIBWX=y
CONFIG_NGBE=y
CONFIG_TXGBE=y
# CONFIG_JME is not set
# CONFIG_KORINA is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MV643XX_ETH is not set
CONFIG_MVMDIO=y
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
# CONFIG_PXA168_ETH is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_PRESTERA=y
CONFIG_PRESTERA_PCI=y
# CONFIG_NET_VENDOR_MEDIATEK is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_NET_VENDOR_NI is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
# CONFIG_NS83820 is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_8390 is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_LPC_ENET is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
CONFIG_QLCNIC=y
# CONFIG_QLCNIC_SRIOV is not set
# CONFIG_QLCNIC_DCB is not set
CONFIG_QLCNIC_HWMON=y
# CONFIG_NETXEN_NIC is not set
CONFIG_QED=y
# CONFIG_QED_SRIOV is not set
# CONFIG_QEDE is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_UART is not set
CONFIG_QCOM_EMAC=y
CONFIG_RMNET=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=y
CONFIG_EPIC100=y
CONFIG_SMSC911X=y
# CONFIG_SMSC9420 is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SUNPLUS=y
# CONFIG_SP7021_EMAC is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=y
# CONFIG_DWC_XLGMAC_PCI is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_DAVINCI_EMAC is not set
# CONFIG_TI_DAVINCI_MDIO is not set
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TI_CPSW is not set
# CONFIG_TI_CPSW_SWITCHDEV is not set
# CONFIG_TI_CPTS is not set
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
CONFIG_VIA_VELOCITY=y
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_SFP=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_MESON_GXL_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM63XX_PHY is not set
CONFIG_BCM7XXX_PHY=y
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
# CONFIG_CICADA_PHY is not set
CONFIG_CORTINA_PHY=y
# CONFIG_DAVICOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
CONFIG_MAXLINEAR_GPHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
# CONFIG_MICROCHIP_PHY is not set
CONFIG_MICROCHIP_T1_PHY=y
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
CONFIG_NXP_TJA11XX_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_TERANETICS_PHY=y
CONFIG_DP83822_PHY=y
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=y
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_PSE_CONTROLLER=y
CONFIG_PSE_REGULATOR=y
# CONFIG_CAN_DEV is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_SUN4I is not set
# CONFIG_MDIO_XGENE is not set
CONFIG_MDIO_ASPEED=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BCM_UNIMAC=y
# CONFIG_MDIO_HISI_FEMAC is not set
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MVUSB=y
CONFIG_MDIO_MSCC_MIIM=y
# CONFIG_MDIO_MOXART is not set
# CONFIG_MDIO_OCTEON is not set
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_MESON_G12A is not set
# CONFIG_MDIO_BUS_MUX_BCM6368 is not set
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
#
# PCS device drivers
#
CONFIG_PCS_LYNX=y
# CONFIG_PCS_RZN1_MIIC is not set
# end of PCS device drivers
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
# CONFIG_PPTP is not set
CONFIG_PPPOL2TP=y
CONFIG_SLHC=y
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
# CONFIG_ATH_TRACEPOINTS is not set
CONFIG_ATH5K_PCI=y
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_WLAN_VENDOR_RALINK is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_WLAN_VENDOR_RSI is not set
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
CONFIG_WAN=y
# CONFIG_HDLC is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
# CONFIG_MISDN_L1OIP is not set
#
# mISDN hardware drivers
#
# CONFIG_MISDN_HFCPCI is not set
# CONFIG_MISDN_HFCMULTI is not set
# CONFIG_MISDN_HFCUSB is not set
# CONFIG_MISDN_AVMFRITZ is not set
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
# CONFIG_MISDN_W6692 is not set
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
CONFIG_ASPEED_BT_IPMI_BMC=y
CONFIG_IPMB_DEVICE_INTERFACE=y
# CONFIG_HW_RANDOM is not set
CONFIG_APPLICOM=y
CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C=y
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_PCIE=y
CONFIG_XILLYBUS_OF=y
# CONFIG_XILLYUSB is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_HIX5HD2 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
CONFIG_I2C_ASPEED=y
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_RK3X=y
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
CONFIG_I2C_WMT=y
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_PCI1XXXX=y
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TINY_USB=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_FSI is not set
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
# CONFIG_SPMI_MSM_PMIC_ARB is not set
# CONFIG_SPMI_MTK_PMIF is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
# CONFIG_OMAP_SSI is not set
#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PTP_1588_CLOCK_IDT82P33=y
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_PINCTRL_AXP209=y
# CONFIG_PINCTRL_BM1880 is not set
CONFIG_PINCTRL_CY8C95X0=y
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MAX77620=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_ROCKCHIP is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=y
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_OWL is not set
CONFIG_PINCTRL_ASPEED=y
# CONFIG_PINCTRL_ASPEED_G4 is not set
CONFIG_PINCTRL_ASPEED_G5=y
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX35=y
# CONFIG_PINCTRL_IMX8MM is not set
# CONFIG_PINCTRL_IMX8MN is not set
CONFIG_PINCTRL_IMX8MP=y
# CONFIG_PINCTRL_IMX8MQ is not set
CONFIG_PINCTRL_IMX8ULP=y
# CONFIG_PINCTRL_IMXRT1050 is not set
CONFIG_PINCTRL_IMX93=y
# CONFIG_PINCTRL_IMXRT1170 is not set
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON8=y
CONFIG_PINCTRL_MESON8B=y
CONFIG_PINCTRL_MESON8_PMX=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
# CONFIG_PINCTRL_WM8750 is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=y
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_IMX_SCU=y
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MXC=y
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_OMAP is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
CONFIG_GPIO_VF610=y
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XGENE_SB is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_ZEVIO=y
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_HTC_EGPIO is not set
CONFIG_GPIO_JANZ_TTL=y
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_MAX77650 is not set
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=y
# CONFIG_GPIO_TWL6040 is not set
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=y
# end of PCI GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_BRCMKONA=y
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GEMINI_POWEROFF is not set
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
# CONFIG_POWER_RESET_LINKSTATION is not set
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_MT6323 is not set
# CONFIG_POWER_RESET_REGULATOR is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_TPS65086 is not set
# CONFIG_POWER_RESET_VERSATILE is not set
CONFIG_POWER_RESET_VEXPRESS=y
# CONFIG_POWER_RESET_KEYSTONE is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_POWER_RESET_RMOBILE is not set
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
# CONFIG_POWER_RESET_SC27XX is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_POWER_SUPPLY_HWMON is not set
# CONFIG_PDA_POWER is not set
CONFIG_APM_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_LEGO_EV3 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LP8788 is not set
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_LTC4162L=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77693=y
# CONFIG_CHARGER_MAX77976 is not set
CONFIG_CHARGER_MT6360=y
# CONFIG_CHARGER_MT6370 is not set
# CONFIG_CHARGER_QCOM_SMBB is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ2515X is not set
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_BQ25980 is not set
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_RK817=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65217=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ARM_SCMI=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=y
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2990=y
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4222=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31730=y
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_OCC_P9_SBE=y
CONFIG_SENSORS_OCC=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_PECI_CPUTEMP=y
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1266 is not set
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
# CONFIG_SENSORS_IR36021 is not set
CONFIG_SENSORS_IR38064=y
# CONFIG_SENSORS_IR38064_REGULATOR is not set
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT7182S=y
CONFIG_SENSORS_LTC2978=y
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=y
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
# CONFIG_SENSORS_PIM4328 is not set
CONFIG_SENSORS_PLI1209BC=y
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
# CONFIG_SENSORS_PM6764TR is not set
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_TPS546D24=y
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_PWM_FAN=y
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC2305=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_TMP464=y
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VEXPRESS=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_CPU_THERMAL=y
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_IMX_SC_THERMAL=y
CONFIG_IMX8MM_THERMAL=y
# CONFIG_K3_THERMAL is not set
# CONFIG_MAX77620_THERMAL is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_SUN8I_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
CONFIG_MTK_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
# CONFIG_BCM2711_THERMAL is not set
# CONFIG_BCM2835_THERMAL is not set
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# CONFIG_EXYNOS_THERMAL is not set
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not set
#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_SPMI_ADC_TM5 is not set
# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
# end of Qualcomm thermal drivers
# CONFIG_UNIPHIER_THERMAL is not set
# CONFIG_SPRD_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_DA9063_WATCHDOG is not set
# CONFIG_DA9062_WATCHDOG is not set
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_MENZ069_WATCHDOG is not set
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_RAVE_SP_WATCHDOG=y
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ASM9260_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_977_WATCHDOG is not set
# CONFIG_FTWDT010_WATCHDOG is not set
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_EP93XX_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
# CONFIG_ORION_WATCHDOG is not set
# CONFIG_RN5T618_WATCHDOG is not set
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_NPCM7XX_WATCHDOG is not set
# CONFIG_STMP3XXX_RTC_WATCHDOG is not set
# CONFIG_TS4800_WATCHDOG is not set
# CONFIG_TS72XX_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_MAX77620_WATCHDOG=y
CONFIG_IMX2_WDT=y
# CONFIG_IMX7ULP_WDT is not set
CONFIG_RETU_WATCHDOG=y
# CONFIG_MOXART_WDT is not set
# CONFIG_ST_LPC_WATCHDOG is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
# CONFIG_LPC18XX_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
CONFIG_ASPEED_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
# CONFIG_UNIPHIER_WATCHDOG is not set
# CONFIG_RTD119X_WATCHDOG is not set
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
CONFIG_I6300ESB_WDT=y
# CONFIG_RDC321X_WDT is not set
# CONFIG_ATH79_WDT is not set
# CONFIG_BCM47XX_WDT is not set
# CONFIG_BCM2835_WDT is not set
# CONFIG_BCM_KONA_WDT is not set
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MPC5200_WDT is not set
CONFIG_MEN_A21_WDT=y
# CONFIG_UML_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_PCI is not set
# CONFIG_BCMA_DRIVER_MIPS is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_SUN4I_GPADC is not set
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_MFD_HI6421_SPMI=y
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_JANZ_CMODIO=y
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_MFD_VIPERBOARD is not set
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
# CONFIG_UCB1400_CORE is not set
CONFIG_MFD_PM8XXX=y
# CONFIG_MFD_SPMI_PMIC is not set
# CONFIG_MFD_SY7636A is not set
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# end of STMicroelectronics STMPE Interface Drivers
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TMIO=y
# CONFIG_MFD_T7L66XB is not set
CONFIG_MFD_TC6387XB=y
CONFIG_MFD_TC6393XB=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=y
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not set
CONFIG_MFD_ROHM_BD718XX=y
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
# CONFIG_MFD_WCD934X is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
CONFIG_MFD_QCOM_PM8008=y
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_ARIZONA_LDO1 is not set
# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set
CONFIG_REGULATOR_ARM_SCMI=y
# CONFIG_REGULATOR_AS3711 is not set
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421V600=y
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX77650=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=y
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6331=y
CONFIG_REGULATOR_MT6332=y
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6370=y
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_REGULATOR_QCOM_USB_VBUS=y
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
# CONFIG_REGULATOR_RT5033 is not set
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
# CONFIG_REGULATOR_SKY81452 is not set
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
CONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS6286X=y
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65132=y
# CONFIG_REGULATOR_TPS65217 is not set
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
CONFIG_REGULATOR_VCTRL=y
# CONFIG_REGULATOR_VEXPRESS is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_WM8400 is not set
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_CEC_CORE=y
#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_MESON_G12A_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_TEGRA_HOST1X is not set
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_USE_DYNAMIC_DEBUG=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
# CONFIG_DRM_FBDEV_EMULATION is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_BUDDY=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
CONFIG_DRM_HDLCD=y
CONFIG_DRM_HDLCD_SHOW_UNDERRUN=y
# CONFIG_DRM_MALI_DISPLAY is not set
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=y
# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
# CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
# CONFIG_DRM_KMB_DISPLAY is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_EXYNOS=y
#
# CRTCs
#
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS5433_DECON=y
# CONFIG_DRM_EXYNOS7_DECON is not set
# CONFIG_DRM_EXYNOS_MIXER is not set
# CONFIG_DRM_EXYNOS_VIDI is not set
#
# Encoders and Bridges
#
# CONFIG_DRM_EXYNOS_DPI is not set
CONFIG_DRM_EXYNOS_DSI=y
# CONFIG_DRM_EXYNOS_DP is not set
CONFIG_DRM_EXYNOS_HDMI=y
# CONFIG_DRM_EXYNOS_MIC is not set
#
# Sub-drivers
#
# CONFIG_DRM_EXYNOS_G2D is not set
CONFIG_DRM_EXYNOS_IPP=y
CONFIG_DRM_EXYNOS_FIMC=y
CONFIG_DRM_EXYNOS_ROTATOR=y
# CONFIG_DRM_EXYNOS_SCALER is not set
# CONFIG_DRM_EXYNOS_GSC is not set
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
# CONFIG_DRM_ARMADA is not set
# CONFIG_DRM_RCAR_DU is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_USE_LVDS is not set
CONFIG_DRM_RCAR_MIPI_DSI=y
# CONFIG_DRM_SHMOBILE is not set
# CONFIG_DRM_SUN4I is not set
CONFIG_DRM_OMAP=y
# CONFIG_OMAP2_DSS_DEBUG is not set
CONFIG_OMAP2_DSS_DEBUGFS=y
# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
# CONFIG_OMAP2_DSS_DPI is not set
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP2_DSS_HDMI_COMMON=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP4_DSS_HDMI_CEC=y
# CONFIG_OMAP5_DSS_HDMI is not set
CONFIG_OMAP2_DSS_SDI=y
# CONFIG_OMAP2_DSS_DSI is not set
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_DRM_TILCDC=y
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=y
# CONFIG_DRM_MSM is not set
# CONFIG_DRM_FSL_DCU is not set
# CONFIG_DRM_TEGRA is not set
CONFIG_DRM_STM=y
CONFIG_DRM_STM_DSI=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_EDP is not set
CONFIG_DRM_PANEL_EBBG_FT8719=y
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
# CONFIG_DRM_PANEL_TDO_TL070WSH30 is not set
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
CONFIG_DRM_CHIPONE_ICN6211=y
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_CROS_EC_ANX7688 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_FSL_LDB is not set
CONFIG_DRM_ITE_IT6505=y
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
CONFIG_DRM_LONTIUM_LT9611=y
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
# CONFIG_DRM_NWL_MIPI_DSI is not set
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
# CONFIG_DRM_SIL_SII8620 is not set
CONFIG_DRM_SII902X=y
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=y
CONFIG_DRM_TI_SN65DSI86=y
# CONFIG_DRM_TI_TPD12S015 is not set
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
# CONFIG_DRM_I2C_ADV7511_CEC is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
CONFIG_DRM_IMX8QXP_PIXEL_LINK=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=y
# CONFIG_DRM_DW_HDMI_I2S_AUDIO is not set
CONFIG_DRM_DW_HDMI_GP_AUDIO=y
# CONFIG_DRM_DW_HDMI_CEC is not set
CONFIG_DRM_DW_MIPI_DSI=y
# end of Display Interface Bridges
CONFIG_DRM_STI=y
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
# CONFIG_DRM_INGENIC is not set
# CONFIG_DRM_V3D is not set
# CONFIG_DRM_VC4 is not set
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
# CONFIG_DRM_HISI_HIBMC is not set
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_IMX_LCDIF=y
# CONFIG_DRM_MESON is not set
CONFIG_DRM_ARCPGU=y
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_GM12U320=y
CONFIG_DRM_SIMPLEDRM=y
# CONFIG_DRM_PL111 is not set
CONFIG_DRM_TVE200=y
# CONFIG_DRM_LIMA is not set
CONFIG_DRM_PANFROST=y
CONFIG_DRM_ASPEED_GFX=y
CONFIG_DRM_MCDE=y
CONFIG_DRM_TIDSS=y
CONFIG_DRM_GUD=y
CONFIG_DRM_SSD130X=y
# CONFIG_DRM_SSD130X_I2C is not set
# CONFIG_DRM_SPRD is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not set
CONFIG_FB_LITTLE_ENDIAN=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CLPS711X is not set
CONFIG_FB_IMX=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_CONTROL is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_GBE is not set
# CONFIG_FB_PVR2 is not set
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_ATMEL is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_VT8500=y
# CONFIG_FB_WM8505 is not set
CONFIG_FB_WMT_GE_ROPS=y
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# CONFIG_FB_OMAP is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=y
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_MT6370=y
CONFIG_BACKLIGHT_QCOM_WLED=y
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=y
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_RAVE_SP=y
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support
CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=y
# CONFIG_SND_CS46XX_NEW_DSP is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_INDIGOIOX=y
CONFIG_SND_INDIGODJX=y
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
CONFIG_SND_HDSPM=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_LOLA=y
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MIXART is not set
CONFIG_SND_NM256=y
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
# CONFIG_SND_HDA_CODEC_CS8409 is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# end of HD-Audio
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_ARM=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SND_USB_UA101=y
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
# CONFIG_SND_USB_POD is not set
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=y
CONFIG_SND_SOC_ADI=y
# CONFIG_SND_SOC_ADI_AXI_I2S is not set
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_AMD_ACP_CONFIG=y
# CONFIG_SND_SOC_APPLE_MCA is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_ATMEL_SOC_CLASSD is not set
# CONFIG_SND_ATMEL_SOC_PDMIC is not set
# CONFIG_SND_ATMEL_SOC_I2S is not set
CONFIG_SND_SOC_MIKROE_PROTO=y
# CONFIG_SND_MCHP_SOC_I2S_MCC is not set
# CONFIG_SND_MCHP_SOC_SPDIFTX is not set
# CONFIG_SND_MCHP_SOC_SPDIFRX is not set
# CONFIG_SND_MCHP_SOC_PDMC is not set
# CONFIG_SND_BCM2835_SOC_I2S is not set
# CONFIG_SND_SOC_CYGNUS is not set
CONFIG_SND_BCM63XX_I2S_WHISTLER=y
# CONFIG_SND_EP93XX_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_MQS=y
# CONFIG_SND_SOC_FSL_AUDMIX is not set
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_FSL_MICFIL=y
# CONFIG_SND_SOC_FSL_XCVR is not set
CONFIG_SND_SOC_FSL_AUD2HTX=y
CONFIG_SND_SOC_FSL_UTILS=y
CONFIG_SND_SOC_IMX_AUDMUX=y
# CONFIG_SND_IMX_SOC is not set
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=y
# CONFIG_SND_JZ4740_SOC_I2S is not set
# CONFIG_SND_KIRKWOOD_SOC is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
# CONFIG_SND_SOC_INTEL_AVS is not set
CONFIG_SND_SOC_INTEL_MACH=y
# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set
# CONFIG_SND_SOC_MT8186 is not set
# CONFIG_SND_SOC_MTK_BTCVSD is not set
# CONFIG_SND_SOC_MT8195 is not set
#
# ASoC support for Amlogic platforms
#
# CONFIG_SND_MESON_AIU is not set
# CONFIG_SND_MESON_AXG_FRDDR is not set
# CONFIG_SND_MESON_AXG_TODDR is not set
# CONFIG_SND_MESON_AXG_TDMIN is not set
# CONFIG_SND_MESON_AXG_TDMOUT is not set
# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
# CONFIG_SND_MESON_AXG_SPDIFOUT is not set
# CONFIG_SND_MESON_AXG_SPDIFIN is not set
# CONFIG_SND_MESON_AXG_PDM is not set
# CONFIG_SND_MESON_GX_SOUND_CARD is not set
# CONFIG_SND_MESON_G12A_TOACODEC is not set
# CONFIG_SND_MESON_G12A_TOHDMITX is not set
# CONFIG_SND_SOC_MESON_T9015 is not set
# end of ASoC support for Amlogic platforms
# CONFIG_SND_MXS_SOC is not set
# CONFIG_SND_PXA2XX_SOC is not set
# CONFIG_SND_SOC_QCOM is not set
# CONFIG_SND_SOC_ROCKCHIP is not set
# CONFIG_SND_SOC_SAMSUNG is not set
#
# SoC Audio support for Renesas SoCs
#
# CONFIG_SND_SOC_SH4_FSI is not set
# CONFIG_SND_SOC_RCAR is not set
# CONFIG_SND_SOC_RZ is not set
# end of SoC Audio support for Renesas SoCs
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
# CONFIG_SND_SOC_SPRD is not set
# CONFIG_SND_SOC_STI is not set
#
# STMicroelectronics STM32 SOC audio support
#
# CONFIG_SND_SOC_STM32_SAI is not set
# CONFIG_SND_SOC_STM32_I2S is not set
# CONFIG_SND_SOC_STM32_SPDIFRX is not set
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
# CONFIG_SND_SUN4I_I2S is not set
# CONFIG_SND_SUN4I_SPDIF is not set
# CONFIG_SND_SUN50I_DMIC is not set
# end of Allwinner SoC Audio support
# CONFIG_SND_SOC_TEGRA is not set
#
# Audio support for Texas Instruments SoCs
#
#
# Texas Instruments DAI support for:
#
# CONFIG_SND_SOC_DAVINCI_ASP is not set
# CONFIG_SND_SOC_DAVINCI_MCASP is not set
# CONFIG_SND_SOC_DAVINCI_VCIF is not set
# CONFIG_SND_SOC_OMAP_DMIC is not set
# CONFIG_SND_SOC_OMAP_MCBSP is not set
# CONFIG_SND_SOC_OMAP_MCPDM is not set
#
# Audio support for boards with Texas Instruments SoCs
#
# CONFIG_SND_SOC_OMAP_ABE_TWL6040 is not set
# CONFIG_SND_SOC_OMAP_HDMI is not set
# CONFIG_SND_SOC_J721E_EVM is not set
# end of Audio support for Texas Instruments SoCs
# CONFIG_SND_SOC_UNIPHIER is not set
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
# CONFIG_SND_SOC_ADAU7002 is not set
CONFIG_SND_SOC_ADAU7118=y
# CONFIG_SND_SOC_ADAU7118_HW is not set
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_AK4118=y
# CONFIG_SND_SOC_AK4375 is not set
# CONFIG_SND_SOC_AK4458 is not set
CONFIG_SND_SOC_AK4554=y
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
# CONFIG_SND_SOC_AW8738 is not set
# CONFIG_SND_SOC_BD28623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CPCAP is not set
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=y
# CONFIG_SND_SOC_CS35L35 is not set
CONFIG_SND_SOC_CS35L36=y
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS35L45_TABLES=y
CONFIG_SND_SOC_CS35L45=y
CONFIG_SND_SOC_CS35L45_I2C=y
CONFIG_SND_SOC_CS42L42_CORE=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS42L83=y
# CONFIG_SND_SOC_CS4234 is not set
CONFIG_SND_SOC_CS4265=y
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX2072X=y
# CONFIG_SND_SOC_JZ4740_CODEC is not set
# CONFIG_SND_SOC_JZ4725B_CODEC is not set
# CONFIG_SND_SOC_JZ4760_CODEC is not set
# CONFIG_SND_SOC_JZ4770_CODEC is not set
# CONFIG_SND_SOC_DA7213 is not set
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8326=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
# CONFIG_SND_SOC_GTM601 is not set
# CONFIG_SND_SOC_HDA is not set
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=y
# CONFIG_SND_SOC_LOCHNAGAR_SC is not set
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
# CONFIG_SND_SOC_MAX9867 is not set
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX98396=y
CONFIG_SND_SOC_MAX9860=y
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
# CONFIG_SND_SOC_PCM179X_I2C is not set
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM5102A=y
# CONFIG_SND_SOC_PCM512x_I2C is not set
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RK817=y
CONFIG_SND_SOC_RL6231=y
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5640=y
# CONFIG_SND_SOC_RT5659 is not set
CONFIG_SND_SOC_RT9120=y
# CONFIG_SND_SOC_SGTL5000 is not set
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIMPLE_MUX=y
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SRC4XXX_I2C is not set
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
# CONFIG_SND_SOC_SSM2602_I2C is not set
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
# CONFIG_SND_SOC_TAS2562 is not set
CONFIG_SND_SOC_TAS2764=y
# CONFIG_SND_SOC_TAS2770 is not set
# CONFIG_SND_SOC_TAS2780 is not set
CONFIG_SND_SOC_TAS5086=y
# CONFIG_SND_SOC_TAS571X is not set
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS5805M=y
# CONFIG_SND_SOC_TAS6424 is not set
# CONFIG_SND_SOC_TDA7419 is not set
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
# CONFIG_SND_SOC_TLV320ADC3XXX is not set
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
# CONFIG_SND_SOC_TLV320AIC31XX is not set
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
# CONFIG_SND_SOC_TLV320AIC3X_I2C is not set
CONFIG_SND_SOC_TLV320ADCX140=y
# CONFIG_SND_SOC_TS3A227E is not set
# CONFIG_SND_SOC_TSCS42XX is not set
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_UDA1334=y
CONFIG_SND_SOC_WCD9335=y
# CONFIG_SND_SOC_WCD934X is not set
# CONFIG_SND_SOC_WM8510 is not set
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
# CONFIG_SND_SOC_WM8728 is not set
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8731_I2C=y
CONFIG_SND_SOC_WM8737=y
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8940=y
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8974 is not set
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_MAX9759=y
# CONFIG_SND_SOC_MT6351 is not set
CONFIG_SND_SOC_MT6358=y
# CONFIG_SND_SOC_MT6660 is not set
# CONFIG_SND_SOC_NAU8315 is not set
# CONFIG_SND_SOC_NAU8540 is not set
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8821=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
CONFIG_SND_SOC_LPASS_RX_MACRO=y
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
# CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE is not set
# CONFIG_SND_TEST_COMPONENT is not set
# CONFIG_SND_VIRTIO is not set
CONFIG_AC97_BUS=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_PCI is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_FEW_INIT_RETRIES=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HISTB is not set
# CONFIG_USB_XHCI_MTK is not set
# CONFIG_USB_XHCI_MVEBU is not set
# CONFIG_USB_XHCI_RCAR is not set
# CONFIG_USB_BRCMSTB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_FSL=y
# CONFIG_USB_EHCI_HCD_NPCM7XX is not set
CONFIG_USB_EHCI_HCD_OMAP=y
# CONFIG_USB_EHCI_HCD_ORION is not set
# CONFIG_USB_EHCI_HCD_SPEAR is not set
# CONFIG_USB_EHCI_HCD_STI is not set
# CONFIG_USB_EHCI_HCD_AT91 is not set
# CONFIG_USB_EHCI_SH is not set
# CONFIG_USB_EHCI_EXYNOS is not set
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_CNS3XXX_EHCI is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC=y
CONFIG_USB_UHCI_PLATFORM=y
CONFIG_USB_UHCI_ASPEED=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
# CONFIG_REALTEK_AUTOPM is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
CONFIG_USBIP_CORE=y
# CONFIG_USBIP_VHCI_HCD is not set
CONFIG_USBIP_HOST=y
# CONFIG_USBIP_VUDC is not set
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MTU3 is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set
#
# Platform Glue Layer
#
# CONFIG_USB_MUSB_TUSB6010 is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not set
# CONFIG_USB_MUSB_JZ4740 is not set
# CONFIG_USB_MUSB_MEDIATEK is not set
# CONFIG_USB_MUSB_POLARFIRE_SOC is not set
#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_QCOM_EUD is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
# CONFIG_USB_HSIC_USB4604 is not set
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_BRCM_USB_PINMAP is not set
# CONFIG_USB_ONBOARD_HUB is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_ISP1301_OMAP is not set
# CONFIG_KEYSTONE_USB_PHY is not set
CONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not set
CONFIG_USB_GPIO_VBUS=y
# CONFIG_TAHVO_USB is not set
CONFIG_USB_ISP1301=y
# CONFIG_USB_MXS_PHY is not set
# CONFIG_USB_TEGRA_PHY is not set
# CONFIG_USB_ULPI is not set
# CONFIG_JZ4770_PHY is not set
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_LPC32XX is not set
CONFIG_USB_FUSB300=y
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_RENESAS_USB3 is not set
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_ASPEED_UDC=y
# CONFIG_USB_ASPEED_VHUB is not set
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_U_AUDIO=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_UAC2=y
CONFIG_USB_F_MIDI=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_F_TCM=y
# CONFIG_USB_CONFIGFS is not set
#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not set
CONFIG_USB_AUDIO=y
# CONFIG_GADGET_UAC1 is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
CONFIG_USB_GADGETFS=y
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=y
CONFIG_USB_GADGET_TARGET=y
CONFIG_USB_MIDI_GADGET=y
CONFIG_USB_G_PRINTER=y
CONFIG_USB_G_HID=y
CONFIG_USB_RAW_GADGET=y
# end of USB Gadget precomposed configurations
# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
# CONFIG_MMC is not set
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_HPB=y
CONFIG_SCSI_UFS_FAULT_INJECTION=y
# CONFIG_SCSI_UFS_HWMON is not set
CONFIG_SCSI_UFSHCD_PCI=y
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
# CONFIG_SCSI_UFS_TI_J721E is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_TURRIS_OMNIA is not set
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_WM8350 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77650=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_PM8058=y
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_LM36274=y
CONFIG_LEDS_TPS6105X=y
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
# CONFIG_LEDS_MAX77693 is not set
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
# CONFIG_LEDS_SGM3140 is not set
#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=y
CONFIG_LEDS_QCOM_LPG=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=y
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=y
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_AL_MC is not set
CONFIG_EDAC_SYNOPSYS=y
# CONFIG_EDAC_XGENE is not set
# CONFIG_EDAC_ASPEED is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
# CONFIG_RTC_DRV_ABB5ZES3 is not set
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_LP8788 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8998 is not set
# CONFIG_RTC_DRV_MAX77686 is not set
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
# CONFIG_RTC_DRV_ISL12026 is not set
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
# CONFIG_RTC_DRV_TPS65910 is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not set
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
CONFIG_RTC_DRV_DS17285=y
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_WM8350=y
# CONFIG_RTC_DRV_SC27XX is not set
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_NTXEC=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DAVINCI is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_IMXDI is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_OMAP is not set
# CONFIG_RTC_DRV_S3C is not set
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_AT91RM9200 is not set
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_RZN1 is not set
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_MV is not set
# CONFIG_RTC_DRV_ARMADA38X is not set
CONFIG_RTC_DRV_CADENCE=y
CONFIG_RTC_DRV_FTRTC010=y
# CONFIG_RTC_DRV_STMP is not set
CONFIG_RTC_DRV_MC13XXX=y
# CONFIG_RTC_DRV_JZ4740 is not set
# CONFIG_RTC_DRV_LPC24XX is not set
# CONFIG_RTC_DRV_LPC32XX is not set
CONFIG_RTC_DRV_PM8XXX=y
# CONFIG_RTC_DRV_TEGRA is not set
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
CONFIG_RTC_DRV_MT6397=y
# CONFIG_RTC_DRV_MT7622 is not set
# CONFIG_RTC_DRV_XGENE is not set
# CONFIG_RTC_DRV_R7301 is not set
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_RTD119X is not set
CONFIG_RTC_DRV_ASPEED=y
# CONFIG_RTC_DRV_TI_K3 is not set
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_DFL=y
CONFIG_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PLATFORM=y
# CONFIG_VFIO_AMBA is not set
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=y
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=y
# CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET is not set
CONFIG_VFIO_MDEV=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_PCI_LEGACY is not set
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
CONFIG_VHOST_SCSI=y
CONFIG_VHOST_VSOCK=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
# CONFIG_COMEDI_ADDI_APCI_1564 is not set
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
# CONFIG_COMEDI_ADDI_APCI_3120 is not set
# CONFIG_COMEDI_ADDI_APCI_3501 is not set
CONFIG_COMEDI_ADDI_APCI_3XXX=y
# CONFIG_COMEDI_ADL_PCI6208 is not set
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
# CONFIG_COMEDI_ADV_PCI1723 is not set
# CONFIG_COMEDI_ADV_PCI1724 is not set
CONFIG_COMEDI_ADV_PCI1760=y
# CONFIG_COMEDI_ADV_PCI_DIO is not set
# CONFIG_COMEDI_AMPLC_DIO200_PCI is not set
CONFIG_COMEDI_AMPLC_PC236_PCI=y
# CONFIG_COMEDI_AMPLC_PC263_PCI is not set
# CONFIG_COMEDI_AMPLC_PCI224 is not set
# CONFIG_COMEDI_AMPLC_PCI230 is not set
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
# CONFIG_COMEDI_ICP_MULTI is not set
# CONFIG_COMEDI_DAQBOARD2000 is not set
CONFIG_COMEDI_JR3_PCI=y
# CONFIG_COMEDI_KE_COUNTER is not set
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=y
# CONFIG_COMEDI_CB_PCIDDA is not set
# CONFIG_COMEDI_CB_PCIMDAS is not set
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
# CONFIG_COMEDI_NI_6527 is not set
# CONFIG_COMEDI_NI_65XX is not set
# CONFIG_COMEDI_NI_660X is not set
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
# CONFIG_COMEDI_NI_PCIDIO is not set
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=y
CONFIG_COMEDI_NI_USB6501=y
CONFIG_COMEDI_USBDUX=y
# CONFIG_COMEDI_USBDUXFAST is not set
CONFIG_COMEDI_USBDUXSIGMA=y
# CONFIG_COMEDI_VMK80XX is not set
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
# CONFIG_COMEDI_8255_SA is not set
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
# CONFIG_COMEDI_TESTS_EXAMPLE is not set
CONFIG_COMEDI_TESTS_NI_ROUTES=y
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
# CONFIG_CLK_SP810 is not set
CONFIG_CLK_VEXPRESS_OSC=y
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_TPS68470 is not set
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_OXNAS is not set
CONFIG_COMMON_CLK_RS9_PCIE=y
CONFIG_COMMON_CLK_VC5=y
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_COMMON_CLK_BD718XX is not set
CONFIG_COMMON_CLK_FIXED_MMIO=y
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_STUB_CLK_HI6220 is not set
# CONFIG_STUB_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX35=y
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
CONFIG_CLK_IMX8MP=y
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
CONFIG_CLK_IMX93=y
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON8B=y
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
# CONFIG_XILINX_VCU is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
CONFIG_FTTMR010_TIMER=y
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_ROCKCHIP_TIMER is not set
# CONFIG_ARMADA_370_XP_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_ORION_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
CONFIG_VT8500_TIMER=y
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_NOMADIK_MTU is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_KEYSTONE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_LPC32XX is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32 is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
# CONFIG_ARM_GLOBAL_TIMER is not set
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_ATMEL_TCB_CLKSRC is not set
# CONFIG_CLKSRC_EXYNOS_MCT is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_QCOM is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
CONFIG_CLKSRC_IMX_GPT=y
# CONFIG_CLKSRC_IMX_TPM is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MILBEAUT_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# CONFIG_GOLDFISH_TIMER is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_IMX_MBOX=y
CONFIG_PLATFORM_MHU=y
# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
# CONFIG_ROCKCHIP_MBOX is not set
# CONFIG_ALTERA_MBOX is not set
# CONFIG_HI3660_MBOX is not set
# CONFIG_HI6220_MBOX is not set
CONFIG_MAILBOX_TEST=y
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
# CONFIG_MTK_CMDQ_MBOX is not set
# CONFIG_SUN6I_MSGBOX is not set
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST=y
# CONFIG_IOMMU_IO_PGTABLE_DART is not set
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
# CONFIG_MSM_IOMMU is not set
# CONFIG_OMAP_IOMMU is not set
# CONFIG_ROCKCHIP_IOMMU is not set
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_EXYNOS_IOMMU is not set
# CONFIG_IPMMU_VMSA is not set
# CONFIG_APPLE_DART is not set
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS=y
CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
# CONFIG_MTK_IOMMU is not set
# CONFIG_MTK_IOMMU_V1 is not set
# CONFIG_QCOM_IOMMU is not set
# CONFIG_SPRD_IOMMU is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
# CONFIG_MESON_EE_PM_DOMAINS is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_RTKIT is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_ASPEED_UART_ROUTING=y
CONFIG_ASPEED_P2A_CTRL=y
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
CONFIG_SOC_BRCMSTB=y
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
CONFIG_FSL_RCPM=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=y
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_AOSS_QMP is not set
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
CONFIG_ARM_IMX_BUS_DEVFREQ=y
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=y
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
# CONFIG_IIO_SW_TRIGGER is not set
# CONFIG_IIO_TRIGGERED_EVENT is not set
#
# Accelerometers
#
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
# CONFIG_ADXL367_I2C is not set
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
# CONFIG_DMARD09 is not set
CONFIG_DMARD10=y
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MSA311=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set
# end of Accelerometers
#
# Analog to digital converters
#
# CONFIG_AD7091R5 is not set
CONFIG_AD7291=y
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD799X=y
CONFIG_ADI_AXI_ADC=y
CONFIG_ASPEED_ADC=y
# CONFIG_AT91_SAMA5D2_ADC is not set
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=y
# CONFIG_DA9150_GPADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
# CONFIG_EXYNOS_ADC is not set
CONFIG_HX711=y
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
CONFIG_IMX8QXP_ADC=y
CONFIG_LP8788_ADC=y
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
# CONFIG_LTC2471 is not set
# CONFIG_LTC2485 is not set
# CONFIG_LTC2497 is not set
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP3422=y
CONFIG_MEDIATEK_MT6360_ADC=y
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
# CONFIG_MEN_Z188_ADC is not set
# CONFIG_MESON_SARADC is not set
# CONFIG_MP2629_ADC is not set
# CONFIG_NAU7802 is not set
# CONFIG_NPCM_ADC is not set
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_PM8XXX_XOADC=y
# CONFIG_QCOM_SPMI_IADC is not set
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=y
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_ROCKCHIP_SARADC is not set
CONFIG_RICHTEK_RTQ6056=y
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
# CONFIG_SD_ADC_MODULATOR is not set
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
CONFIG_STMPE_ADC=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
CONFIG_VF610_ADC=y
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends
#
# Amplifiers
#
# CONFIG_HMC425 is not set
# end of Amplifiers
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_ATLAS_EZO_SENSOR=y
# CONFIG_BME680 is not set
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
# CONFIG_SCD30_CORE is not set
CONFIG_SCD4X=y
CONFIG_SENSIRION_SGP30=y
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
# CONFIG_SPS30_I2C is not set
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
CONFIG_IIO_SCMI=y
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
# CONFIG_AD5446 is not set
# CONFIG_AD5593R is not set
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
CONFIG_DPOT_DAC=y
# CONFIG_DS4424 is not set
# CONFIG_LPC18XX_DAC is not set
# CONFIG_M62332 is not set
CONFIG_MAX517=y
CONFIG_MAX5821=y
# CONFIG_MCP4725 is not set
# CONFIG_STM32_DAC is not set
# CONFIG_TI_DAC5571 is not set
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# end of IIO dummy driver
#
# Filters
#
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
# CONFIG_HDC100X is not set
CONFIG_HDC2010=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
# CONFIG_HTU21 is not set
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
CONFIG_BOSCH_BNO055_I2C=y
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_KMX61=y
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
# CONFIG_IIO_ST_LSM6DSX is not set
CONFIG_IIO_ST_LSM9DS0=y
CONFIG_IIO_ST_LSM9DS0_I2C=y
# end of Inertial measurement units
#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=y
# CONFIG_AL3010 is not set
# CONFIG_AL3320A is not set
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
# CONFIG_IQS621_ALS is not set
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
CONFIG_SENSORS_LM3533=y
CONFIG_LTR501=y
CONFIG_LTRF216A=y
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_TCS3414=y
CONFIG_TCS3472=y
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_TSL2583=y
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
CONFIG_VEML6030=y
CONFIG_VEML6070=y
# CONFIG_VL6180 is not set
CONFIG_ZOPT2201=y
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_RM3100_I2C is not set
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers
#
# Inclinometer sensors
#
# end of Inclinometer sensors
CONFIG_IIO_RESCALE_KUNIT_TEST=y
CONFIG_IIO_FORMAT_KUNIT_TEST=y
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=y
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MAX5432=y
CONFIG_MCP4018=y
CONFIG_MCP4531=y
CONFIG_TPL0102=y
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
# CONFIG_DLHL60D is not set
CONFIG_DPS310=y
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_T5403=y
CONFIG_HP206C=y
# CONFIG_ZPA2326 is not set
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_PING=y
# CONFIG_RFD77402 is not set
CONFIG_SRF04=y
# CONFIG_SX9310 is not set
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=y
CONFIG_SRF08=y
# CONFIG_VCNL3020 is not set
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
# CONFIG_MLX90614 is not set
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
# CONFIG_TMP117 is not set
# CONFIG_TSYS01 is not set
CONFIG_TSYS02D=y
# end of Temperature sensors
# CONFIG_NTB is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
CONFIG_PWM_CLK=y
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_DWC is not set
# CONFIG_PWM_EP93XX is not set
CONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
CONFIG_PWM_IMX1=y
# CONFIG_PWM_IMX27 is not set
CONFIG_PWM_IMX_TPM=y
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
CONFIG_PWM_LP3943=y
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
CONFIG_PWM_NTXEC=y
# CONFIG_PWM_OMAP_DMTIMER is not set
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_STMPE is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
CONFIG_PWM_VT8500=y
CONFIG_PWM_XILINX=y
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
CONFIG_XILINX_INTC=y
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=y
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RESET_TI_TPS380X=y
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
# CONFIG_PHY_SUN4I_USB is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN9I_USB is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_NS2_PCIE is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_INGENIC_USB is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
CONFIG_PHY_LAN966X_SERDES=y
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_S5PV210_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
CONFIG_PHY_UNIPHIER_AHCI=y
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_DM816X_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
# CONFIG_DTPM is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
# CONFIG_MCB_LPC is not set
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
CONFIG_NVMEM_IMX_IIM=y
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RAVE_SP_EEPROM is not set
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_NVMEM_SPMI_SDAM=y
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_STM_SOURCE_FTRACE=y
# CONFIG_INTEL_TH is not set
# end of HW tracing support
CONFIG_FPGA=y
# CONFIG_FPGA_MGR_SOCFPGA is not set
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
# CONFIG_ALTERA_PR_IP_CORE is not set
CONFIG_FPGA_MGR_ALTERA_CVP=y
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not set
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
# CONFIG_XILINX_PR_DECOUPLER is not set
CONFIG_FPGA_REGION=y
# CONFIG_OF_FPGA_REGION is not set
CONFIG_FPGA_DFL=y
# CONFIG_FPGA_DFL_AFU is not set
# CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000 is not set
# CONFIG_FPGA_DFL_PCI is not set
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
# CONFIG_FSI_MASTER_GPIO is not set
# CONFIG_FSI_MASTER_HUB is not set
CONFIG_FSI_MASTER_AST_CF=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=y
# CONFIG_INTERCONNECT_IMX8MM is not set
CONFIG_INTERCONNECT_IMX8MN=y
# CONFIG_INTERCONNECT_IMX8MQ is not set
CONFIG_INTERCONNECT_IMX8MP=y
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
# CONFIG_INTERRUPT_CNT is not set
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
CONFIG_FTM_QUADDEC=y
# CONFIG_MICROCHIP_TCB_CAPTURE is not set
# CONFIG_INTEL_QEP is not set
# CONFIG_TI_ECAP_CAPTURE is not set
CONFIG_MOST=y
CONFIG_MOST_USB_HDM=y
CONFIG_MOST_CDEV=y
# CONFIG_MOST_SND is not set
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_PECI_ASPEED=y
CONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
# CONFIG_F2FS_FS_LZ4 is not set
CONFIG_F2FS_FS_ZSTD=y
# CONFIG_F2FS_IOSTAT is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_METACOPY=y
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_CEPH_FS=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
CONFIG_SMBFS_COMMON=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_DEBUG_CURSOR=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
CONFIG_CC_HAS_RANDSTRUCT=y
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (arm)
#
CONFIG_CRYPTO_POLY1305_ARM=y
# CONFIG_CRYPTO_BLAKE2S_ARM is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256_ARM=y
CONFIG_CRYPTO_SHA512_ARM=y
CONFIG_CRYPTO_AES_ARM=y
# CONFIG_CRYPTO_CHACHA20_NEON is not set
# end of Accelerated Cryptographic Algorithms for CPU (arm)
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_POLYNOMIAL=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_BTF_TAG=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_KDB is not set
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
# CONFIG_NET_NS_REFCNT_TRACKER is not set
CONFIG_DEBUG_NET=y
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_WX is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SHRINKER_DEBUG=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_KMAP_LOCAL=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
# CONFIG_KASAN_VMALLOC is not set
CONFIG_KASAN_KUNIT_TEST=y
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
# CONFIG_KFENCE_STATIC_KEYS is not set
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_KFENCE_KUNIT_TEST=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_WQ_WATCHDOG=y
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_SCALE_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_STACK_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_SYNTH_EVENTS=y
# CONFIG_USER_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
CONFIG_TRACE_EVENT_INJECT=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_GCOV_PROFILE_FTRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_SYNTH_EVENT_GEN_TEST=y
CONFIG_RV=y
# CONFIG_RV_MON_WWNR is not set
# CONFIG_RV_REACTORS is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set
#
# arm Debugging
#
# CONFIG_ARM_PTDUMP_DEBUGFS is not set
# CONFIG_UNWINDER_FRAME_POINTER is not set
CONFIG_UNWINDER_ARM=y
CONFIG_ARM_UNWIND=y
CONFIG_BACKTRACE_VERBOSE=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_PID_IN_CONTEXTIDR=y
# CONFIG_CORESIGHT is not set
# end of arm Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAULT_INJECTION_USERCOPY is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
# CONFIG_RBTREE_TEST is not set
CONFIG_REED_SOLOMON_TEST=y
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=y
# CONFIG_STRING_SELFTEST is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
CONFIG_TEST_BITMAP=y
# CONFIG_TEST_UUID is not set
CONFIG_TEST_XARRAY=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_SIPHASH=y
# CONFIG_TEST_IDA is not set
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_SYSCTL=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_FORTIFY_KUNIT_TEST=y
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_DYNAMIC_DEBUG is not set
CONFIG_TEST_DEBUG_VIRTUAL=y
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_FREE_PAGES=y
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
2022-11-13 20:14 ` kernel test robot
@ 2022-11-15 2:38 ` Xin Long
2022-11-15 10:19 ` Paolo Abeni
0 siblings, 1 reply; 16+ messages in thread
From: Xin Long @ 2022-11-15 2:38 UTC (permalink / raw)
To: kernel test robot
Cc: network dev, linux-sctp, llvm, oe-kbuild-all, davem, kuba,
Eric Dumazet, Paolo Abeni, Marcelo Ricardo Leitner, Neil Horman,
David Ahern, Carlo Carraro
On Sun, Nov 13, 2022 at 3:15 PM kernel test robot <lkp@intel.com> wrote:
>
> Hi Xin,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on net-next/master]
>
> url: https://github.com/intel-lab-lkp/linux/commits/Xin-Long/sctp-support-vrf-processing/20221114-004540
> patch link: https://lore.kernel.org/r/86dfdc49613ca8a8a6a3d7c7cf2e7bd8207338f2.1668357542.git.lucien.xin%40gmail.com
> patch subject: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
> config: arm-randconfig-r034-20221114
> compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 463da45892e2d2a262277b91b96f5f8c05dc25d0)
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # install arm cross compiling tool for clang build
> # apt-get install binutils-arm-linux-gnueabi
> # https://github.com/intel-lab-lkp/linux/commit/6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
> git remote add linux-review https://github.com/intel-lab-lkp/linux
> git fetch --no-tags linux-review Xin-Long/sctp-support-vrf-processing/20221114-004540
> git checkout 6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
> # save the config file
> mkdir build_dir && cp config build_dir/.config
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm SHELL=/bin/bash net/openvswitch/
>
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
The build disabled IP_SCTP, while net/sctp/sctp.h is included in other modules.
Instead of "net/sctp/sctp.h", "linux/sctp.h" should be included, I
will send another patch series to fix them.
We do NOT need to change anything in this series.
Thanks.
> include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
> compiletime_assert_rwonce_type(x); \
> ^
> include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
> compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
> ^
> include/linux/compiler_types.h:324:10: note: expanded from macro '__native_word'
> (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || \
> ^
> include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
> _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
> ^~~~~~~~~
> include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
> __compiletime_assert(condition, msg, prefix, suffix)
> ^~~~~~~~~
> include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
> if (!(condition)) \
> ^~~~~~~~~
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
> include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
> compiletime_assert_rwonce_type(x); \
> ^
> include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
> compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
> ^
> include/linux/compiler_types.h:324:39: note: expanded from macro '__native_word'
> (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || \
> ^
> include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
> _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
> ^~~~~~~~~
> include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
> __compiletime_assert(condition, msg, prefix, suffix)
> ^~~~~~~~~
> include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
> if (!(condition)) \
> ^~~~~~~~~
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
> include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
> compiletime_assert_rwonce_type(x); \
> ^
> include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
> compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
> ^
> include/linux/compiler_types.h:325:10: note: expanded from macro '__native_word'
> sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
> ^
> include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
> _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
> ^~~~~~~~~
> include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
> __compiletime_assert(condition, msg, prefix, suffix)
> ^~~~~~~~~
> include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
> if (!(condition)) \
> ^~~~~~~~~
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
> include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
> compiletime_assert_rwonce_type(x); \
> ^
> include/asm-generic/rwonce.h:36:35: note: expanded from macro 'compiletime_assert_rwonce_type'
> compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
> ^
> include/linux/compiler_types.h:325:38: note: expanded from macro '__native_word'
> sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
> ^
> include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
> _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
> ^~~~~~~~~
> include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
> __compiletime_assert(condition, msg, prefix, suffix)
> ^~~~~~~~~
> include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
> if (!(condition)) \
> ^~~~~~~~~
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
> include/asm-generic/rwonce.h:49:33: note: expanded from macro 'READ_ONCE'
> compiletime_assert_rwonce_type(x); \
> ^
> include/asm-generic/rwonce.h:36:48: note: expanded from macro 'compiletime_assert_rwonce_type'
> compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
> ^
> include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
> _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
> ^~~~~~~~~
> include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
> __compiletime_assert(condition, msg, prefix, suffix)
> ^~~~~~~~~
> include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
> if (!(condition)) \
> ^~~~~~~~~
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
> include/asm-generic/rwonce.h:50:14: note: expanded from macro 'READ_ONCE'
> __READ_ONCE(x); \
> ^
> include/asm-generic/rwonce.h:44:65: note: expanded from macro '__READ_ONCE'
> #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
> ^
> include/linux/compiler_types.h:313:13: note: expanded from macro '__unqual_scalar_typeof'
> _Generic((x), \
> ^
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
> include/asm-generic/rwonce.h:50:14: note: expanded from macro 'READ_ONCE'
> __READ_ONCE(x); \
> ^
> include/asm-generic/rwonce.h:44:65: note: expanded from macro '__READ_ONCE'
> #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
> ^
> include/linux/compiler_types.h:320:15: note: expanded from macro '__unqual_scalar_typeof'
> default: (x)))
> ^
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ~~~ ^
> include/asm-generic/rwonce.h:50:14: note: expanded from macro 'READ_ONCE'
> __READ_ONCE(x); \
> ^
> include/asm-generic/rwonce.h:44:72: note: expanded from macro '__READ_ONCE'
> #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
> ^
> In file included from net/openvswitch/actions.c:26:
> In file included from include/net/sctp/checksum.h:27:
> >> include/net/sctp/sctp.h:686:19: error: invalid argument type 'void' to unary expression
> l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 9 errors generated.
>
>
> vim +686 include/net/sctp/sctp.h
>
> 679
> 680 static inline bool sctp_sk_bound_dev_eq(struct net *net, int bound_dev_if,
> 681 int dif, int sdif)
> 682 {
> 683 bool l3mdev_accept = true;
> 684
> 685 #if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
> > 686 l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> 687 #endif
> 688 return inet_bound_dev_eq(l3mdev_accept, bound_dev_if, dif, sdif);
> 689 }
> 690
>
> --
> 0-DAY CI Kernel Test Service
> https://01.org/lkp
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
2022-11-15 2:38 ` Xin Long
@ 2022-11-15 10:19 ` Paolo Abeni
2022-11-15 15:25 ` Xin Long
0 siblings, 1 reply; 16+ messages in thread
From: Paolo Abeni @ 2022-11-15 10:19 UTC (permalink / raw)
To: Xin Long, kernel test robot
Cc: network dev, linux-sctp, llvm, oe-kbuild-all, davem, kuba,
Eric Dumazet, Marcelo Ricardo Leitner, Neil Horman, David Ahern,
Carlo Carraro
On Mon, 2022-11-14 at 21:38 -0500, Xin Long wrote:
> On Sun, Nov 13, 2022 at 3:15 PM kernel test robot <lkp@intel.com> wrote:
> >
> > Hi Xin,
> >
> > Thank you for the patch! Yet something to improve:
> >
> > [auto build test ERROR on net-next/master]
> >
> > url: https://github.com/intel-lab-lkp/linux/commits/Xin-Long/sctp-support-vrf-processing/20221114-004540
> > patch link: https://lore.kernel.org/r/86dfdc49613ca8a8a6a3d7c7cf2e7bd8207338f2.1668357542.git.lucien.xin%40gmail.com
> > patch subject: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
> > config: arm-randconfig-r034-20221114
> > compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 463da45892e2d2a262277b91b96f5f8c05dc25d0)
> > reproduce (this is a W=1 build):
> > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > chmod +x ~/bin/make.cross
> > # install arm cross compiling tool for clang build
> > # apt-get install binutils-arm-linux-gnueabi
> > # https://github.com/intel-lab-lkp/linux/commit/6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
> > git remote add linux-review https://github.com/intel-lab-lkp/linux
> > git fetch --no-tags linux-review Xin-Long/sctp-support-vrf-processing/20221114-004540
> > git checkout 6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
> > # save the config file
> > mkdir build_dir && cp config build_dir/.config
> > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm SHELL=/bin/bash net/openvswitch/
> >
> > If you fix the issue, kindly add following tag where applicable
> > > Reported-by: kernel test robot <lkp@intel.com>
> >
> > All errors (new ones prefixed by >>):
> >
> > In file included from net/openvswitch/actions.c:26:
> > In file included from include/net/sctp/checksum.h:27:
> > > > include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> > l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> > ~~~ ^
> The build disabled IP_SCTP, while net/sctp/sctp.h is included in other modules.
> Instead of "net/sctp/sctp.h", "linux/sctp.h" should be included, I
> will send another patch series to fix them.
>
> We do NOT need to change anything in this series.
'net->sctp' is defined only when CONFIG_SCTP is enabled. AFAICS the new
helper introduced by this patch is the only function in sctp.h
accessing 'net->sctp', so prior to this patch including sctp.h with
# CONFIG_SCTP is not set
was apparently safe, while not it breaks the build.
I think the issue should be addressed here.
Thanks,
Paolo
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 7/7] selftests: add a selftest for sctp vrf
2022-11-13 16:44 ` [PATCH net-next 7/7] selftests: add a selftest for sctp vrf Xin Long
@ 2022-11-15 10:29 ` Paolo Abeni
2022-11-15 15:33 ` Xin Long
0 siblings, 1 reply; 16+ messages in thread
From: Paolo Abeni @ 2022-11-15 10:29 UTC (permalink / raw)
To: Xin Long, network dev, linux-sctp
Cc: davem, kuba, Eric Dumazet, Marcelo Ricardo Leitner, Neil Horman,
David Ahern, Carlo Carraro
Hello,
On Sun, 2022-11-13 at 11:44 -0500, Xin Long wrote:
> This patch adds 12 small test cases: 01-04 test for the sysctl
> net.sctp.l3mdev_accept. 05-10 test for only binding to a right
> l3mdev device, the connection can be created. 11-12 test for
> two socks binding to different l3mdev devices at the same time,
> each of them can process the packets from the corresponding
> peer. The tests run for both IPv4 and IPv6 SCTP.
>
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
> ---
> tools/testing/selftests/net/Makefile | 2 +
> tools/testing/selftests/net/sctp_hello.c | 139 ++++++++++++++++++++
> tools/testing/selftests/net/sctp_vrf.sh | 160 +++++++++++++++++++++++
> 3 files changed, 301 insertions(+)
> create mode 100644 tools/testing/selftests/net/sctp_hello.c
> create mode 100755 tools/testing/selftests/net/sctp_vrf.sh
>
> diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
> index cec4800cb017..880e6ded6ed5 100644
> --- a/tools/testing/selftests/net/Makefile
> +++ b/tools/testing/selftests/net/Makefile
> @@ -72,6 +72,8 @@ TEST_GEN_PROGS += sk_bind_sendto_listen
> TEST_GEN_PROGS += sk_connect_zero_addr
> TEST_PROGS += test_ingress_egress_chaining.sh
> TEST_GEN_PROGS += so_incoming_cpu
> +TEST_PROGS += sctp_vrf.sh
> +TEST_GEN_FILES += sctp_hello
>
> TEST_FILES := settings
>
> diff --git a/tools/testing/selftests/net/sctp_hello.c b/tools/testing/selftests/net/sctp_hello.c
> new file mode 100644
> index 000000000000..58f763ca8b47
> --- /dev/null
> +++ b/tools/testing/selftests/net/sctp_hello.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <sys/types.h>
> +#include <netinet/in.h>
> +#include <arpa/inet.h>
> +
> +static void set_addr(struct sockaddr_storage *ss, char *ip, char *port, int *len)
> +{
> + if (ss->ss_family == AF_INET) {
> + struct sockaddr_in *a = (struct sockaddr_in *)ss;
> +
> + a->sin_addr.s_addr = inet_addr(ip);
> + a->sin_port = htons(atoi(port));
> + *len = sizeof(*a);
> + } else {
> + struct sockaddr_in6 *a = (struct sockaddr_in6 *)ss;
> +
> + a->sin6_family = AF_INET6;
> + inet_pton(AF_INET6, ip, &a->sin6_addr);
> + a->sin6_port = htons(atoi(port));
> + *len = sizeof(*a);
> + }
> +}
> +
> +static int do_client(int argc, char *argv[])
> +{
> + struct sockaddr_storage ss;
> + char buf[] = "hello";
> + int csk, ret, len;
> +
> + if (argc < 5) {
> + printf("%s client -4|6 IP PORT [IP PORT]\n", argv[0]);
> + return -1;
> + }
> +
> + bzero((void *)&ss, sizeof(ss));
> + ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
> + csk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
> + if (csk < 0) {
> + printf("failed to create socket\n");
> + return -1;
> + }
> +
> + if (argc >= 7) {
> + set_addr(&ss, argv[5], argv[6], &len);
> + ret = bind(csk, (struct sockaddr *)&ss, len);
> + if (ret < 0) {
> + printf("failed to bind to address\n");
> + return -1;
> + }
> + }
> +
> + set_addr(&ss, argv[3], argv[4], &len);
> + ret = connect(csk, (struct sockaddr *)&ss, len);
> + if (ret < 0) {
> + printf("failed to connect to peer\n");
> + return -1;
> + }
> +
> + ret = send(csk, buf, strlen(buf) + 1, 0);
> + if (ret < 0) {
> + printf("failed to send msg %d\n", ret);
> + return -1;
> + }
> + sleep(1);
> + close(csk);
> +
> + return 0;
> +}
> +
> +int main(int argc, char *argv[])
> +{
> + struct sockaddr_storage ss;
> + int lsk, csk, ret, len;
> + char buf[20];
> +
> + if (argc < 2 || (strcmp(argv[1], "server") && strcmp(argv[1], "client"))) {
> + printf("%s server|client ...\n", argv[0]);
> + return -1;
> + }
> +
> + if (!strcmp(argv[1], "client"))
> + return do_client(argc, argv);
> +
> + if (argc < 5) {
> + printf("%s server -4|6 IP PORT [IFACE]\n", argv[0]);
> + return -1;
> + }
> +
> + ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
> + lsk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
> + if (lsk < 0) {
> + printf("failed to create lsk\n");
> + return -1;
> + }
> +
> + if (argc >= 6) {
> + ret = setsockopt(lsk, SOL_SOCKET, SO_BINDTODEVICE,
> + argv[5], strlen(argv[5]) + 1);
> + if (ret < 0) {
> + printf("failed to bind to device\n");
> + return -1;
> + }
> + }
> +
> + set_addr(&ss, argv[3], argv[4], &len);
> + ret = bind(lsk, (struct sockaddr *)&ss, len);
> + if (ret < 0) {
> + printf("failed to bind to address\n");
> + return -1;
> + }
> +
> + ret = listen(lsk, 5);
> + if (ret < 0) {
> + printf("failed to listen on port\n");
> + return -1;
> + }
> +
> + csk = accept(lsk, (struct sockaddr *)NULL, (socklen_t *)NULL);
> + if (csk < 0) {
> + printf("failed to accept new client\n");
> + return -1;
> + }
> +
> + ret = recv(csk, buf, sizeof(buf), 0);
> + if (ret <= 0) {
> + printf("failed to recv msg %d\n", ret);
> + return -1;
> + }
> + sleep(2);
Why do you need such sleep here? aren't blocking operations on socket
enough?
> + close(csk);
> + close(lsk);
> +
> + return 0;
> +}
> diff --git a/tools/testing/selftests/net/sctp_vrf.sh b/tools/testing/selftests/net/sctp_vrf.sh
> new file mode 100755
> index 000000000000..310749f58386
> --- /dev/null
> +++ b/tools/testing/selftests/net/sctp_vrf.sh
> @@ -0,0 +1,160 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Testing For SCTP VRF.
> +# TOPO: CLIENT_NS1 (veth1) <---> (veth1) -> vrf_s1
> +# SERVER_NS
> +# CLIENT_NS2 (veth1) <---> (veth2) -> vrf_s2
> +
> +CLIENT_NS1="client-ns1"
> +CLIENT_NS2="client-ns2"
> +CLIENT_IP4="10.0.0.1"
> +CLIENT_IP6="2000::1"
> +CLIENT_PORT=1234
> +
> +SERVER_NS="server-ns"
> +SERVER_IP4="10.0.0.2"
> +SERVER_IP6="2000::2"
> +SERVER_PORT=1234
> +
> +setup() {
> + modprobe sctp
> + ip netns add $CLIENT_NS1
> + ip netns add $CLIENT_NS2
> + ip netns add $SERVER_NS
> + ip -n $SERVER_NS link add veth1 type veth peer name veth1 netns $CLIENT_NS1
> + ip -n $SERVER_NS link add veth2 type veth peer name veth1 netns $CLIENT_NS2
> +
> + ip -n $CLIENT_NS1 link set veth1 up
> + ip -n $CLIENT_NS1 addr add $CLIENT_IP4/24 dev veth1
> + ip -n $CLIENT_NS1 addr add $CLIENT_IP6/24 dev veth1
> +
> + ip -n $CLIENT_NS2 link set veth1 up
> + ip -n $CLIENT_NS2 addr add $CLIENT_IP4/24 dev veth1
> + ip -n $CLIENT_NS2 addr add $CLIENT_IP6/24 dev veth1
> +
> + ip -n $SERVER_NS link add dummy1 type dummy
> + ip -n $SERVER_NS link set dummy1 up
> + ip -n $SERVER_NS link add vrf-1 type vrf table 10
> + ip -n $SERVER_NS link add vrf-2 type vrf table 20
> + ip -n $SERVER_NS link set vrf-1 up
> + ip -n $SERVER_NS link set vrf-2 up
> + ip -n $SERVER_NS link set veth1 master vrf-1
> + ip -n $SERVER_NS link set veth2 master vrf-2
> +
> + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev dummy1
> + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth1
> + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth2
> + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev dummy1
> + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth1
> + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth2
> +
> + ip -n $SERVER_NS link set veth1 up
> + ip -n $SERVER_NS link set veth2 up
> + sleep 3
I guess you need this 'sleep' to wait for dad completion on the above
ipv6 addresses. If so, you can avoid the sleep adding 'nodad' to the ip
route command line.
> + ip -n $SERVER_NS route add table 10 $CLIENT_IP4 dev veth1 src $SERVER_IP4
> + ip -n $SERVER_NS route add table 20 $CLIENT_IP4 dev veth2 src $SERVER_IP4
> + ip -n $SERVER_NS route add $CLIENT_IP4 dev veth1 src $SERVER_IP4
> + ip -n $SERVER_NS route add table 10 $CLIENT_IP6 dev veth1 src $SERVER_IP6
> + ip -n $SERVER_NS route add table 20 $CLIENT_IP6 dev veth2 src $SERVER_IP6
> + ip -n $SERVER_NS route add $CLIENT_IP6 dev veth1 src $SERVER_IP6
> +
> + L3MDEV=`ip netns exec $SERVER_NS cat /proc/sys/net/sctp/l3mdev_accept`
> +}
> +
> +cleanup() {
> + ip netns exec $SERVER_NS echo $L3MDEV > /proc/sys/net/sctp/l3mdev_accept
> + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> + ip netns del "$CLIENT_NS1"
> + ip netns del "$CLIENT_NS2"
> + ip netns del "$SERVER_NS"
> +}
> +
> +do_testx() {
> + IFACE1=$1
> + IFACE2=$2
> +
> + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> + $SERVER_PORT $IFACE1 2>&1 >/dev/null &
> + disown
> + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> + $SERVER_PORT $IFACE2 2>&1 >/dev/null &
> + disown
> + sleep 1
Altertantivelly you can wait untill the relevant sctp socket is liste
by 'ss' output, it would be more roboust.
> + timeout 3 ip netns exec $CLIENT_NS1 ./sctp_hello client $AF \
> + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null && \
> + timeout 3 ip netns exec $CLIENT_NS2 ./sctp_hello client $AF \
> + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
> +}
> +
> +do_test() {
> + CLIENT_NS=$1
> + IFACE=$2
> +
> + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> + $SERVER_PORT $IFACE 2>&1 >/dev/null &
> + disown
> + sleep 1
> + timeout 3 ip netns exec $CLIENT_NS ./sctp_hello client $AF \
> + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
> +}
> +
> +testup() {
> + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=1 2>&1 >/dev/null
> + echo -n "TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y "
> + do_test $CLIENT_NS1 || { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 02: nobind, connect from client 2, l3mdev_accept=1, N "
> + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=0 2>&1 >/dev/null
> + echo -n "TEST 03: nobind, connect from client 1, l3mdev_accept=0, N "
> + do_test $CLIENT_NS1 && { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 04: nobind, connect from client 2, l3mdev_accept=0, N "
> + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 05: bind veth2 in server, connect from client 1, N "
> + do_test $CLIENT_NS1 veth2 && { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 06: bind veth1 in server, connect from client 1, Y "
> + do_test $CLIENT_NS1 veth1 || { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 07: bind vrf-1 in server, connect from client 1, Y "
> + do_test $CLIENT_NS1 vrf-1 || { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 08: bind vrf-2 in server, connect from client 1, N "
> + do_test $CLIENT_NS1 vrf-2 && { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 09: bind vrf-2 in server, connect from client 2, Y "
> + do_test $CLIENT_NS2 vrf-2 || { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 10: bind vrf-1 in server, connect from client 2, N "
> + do_test $CLIENT_NS2 vrf-1 && { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 11: bind vrf-1 & 2 in server, connect from client 1 & 2, Y "
> + do_testx vrf-1 vrf-2 || { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +
> + echo -n "TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N "
> + do_testx vrf-2 vrf-1 || { echo "[FAIL]"; return 1; }
> + echo "[PASS]"
> +}
> +
> +trap cleanup EXIT
> +setup || exit $?
> +echo "Testing For SCTP VRF:"
> +CLIENT_IP=$CLIENT_IP4 SERVER_IP=$SERVER_IP4 AF="-4" testup && echo "***v4 Tests Done***" &&
> +CLIENT_IP=$CLIENT_IP6 SERVER_IP=$SERVER_IP6 AF="-6" testup && echo "***v6 Tests Done***"
To properly integrate with the self-test suite, you need to ensure that
the script exits with an error code in case of failure, e.g. storing
the error in a global variable 'ret' and adding a final:
exit $ret
Cheers,
Paolo
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
2022-11-15 10:19 ` Paolo Abeni
@ 2022-11-15 15:25 ` Xin Long
0 siblings, 0 replies; 16+ messages in thread
From: Xin Long @ 2022-11-15 15:25 UTC (permalink / raw)
To: Paolo Abeni
Cc: kernel test robot, network dev, linux-sctp, llvm, oe-kbuild-all,
davem, kuba, Eric Dumazet, Marcelo Ricardo Leitner, Neil Horman,
David Ahern, Carlo Carraro
On Tue, Nov 15, 2022 at 5:19 AM Paolo Abeni <pabeni@redhat.com> wrote:
>
> On Mon, 2022-11-14 at 21:38 -0500, Xin Long wrote:
> > On Sun, Nov 13, 2022 at 3:15 PM kernel test robot <lkp@intel.com> wrote:
> > >
> > > Hi Xin,
> > >
> > > Thank you for the patch! Yet something to improve:
> > >
> > > [auto build test ERROR on net-next/master]
> > >
> > > url: https://github.com/intel-lab-lkp/linux/commits/Xin-Long/sctp-support-vrf-processing/20221114-004540
> > > patch link: https://lore.kernel.org/r/86dfdc49613ca8a8a6a3d7c7cf2e7bd8207338f2.1668357542.git.lucien.xin%40gmail.com
> > > patch subject: [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup
> > > config: arm-randconfig-r034-20221114
> > > compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 463da45892e2d2a262277b91b96f5f8c05dc25d0)
> > > reproduce (this is a W=1 build):
> > > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > chmod +x ~/bin/make.cross
> > > # install arm cross compiling tool for clang build
> > > # apt-get install binutils-arm-linux-gnueabi
> > > # https://github.com/intel-lab-lkp/linux/commit/6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
> > > git remote add linux-review https://github.com/intel-lab-lkp/linux
> > > git fetch --no-tags linux-review Xin-Long/sctp-support-vrf-processing/20221114-004540
> > > git checkout 6129dc2e382c6e2d3198f6c32cc1f750a15a77ab
> > > # save the config file
> > > mkdir build_dir && cp config build_dir/.config
> > > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm SHELL=/bin/bash net/openvswitch/
> > >
> > > If you fix the issue, kindly add following tag where applicable
> > > > Reported-by: kernel test robot <lkp@intel.com>
> > >
> > > All errors (new ones prefixed by >>):
> > >
> > > In file included from net/openvswitch/actions.c:26:
> > > In file included from include/net/sctp/checksum.h:27:
> > > > > include/net/sctp/sctp.h:686:35: error: no member named 'sctp' in 'struct net'
> > > l3mdev_accept = !!READ_ONCE(net->sctp.l3mdev_accept);
> > > ~~~ ^
> > The build disabled IP_SCTP, while net/sctp/sctp.h is included in other modules.
> > Instead of "net/sctp/sctp.h", "linux/sctp.h" should be included, I
> > will send another patch series to fix them.
> >
> > We do NOT need to change anything in this series.
>
> 'net->sctp' is defined only when CONFIG_SCTP is enabled. AFAICS the new
> helper introduced by this patch is the only function in sctp.h
> accessing 'net->sctp', so prior to this patch including sctp.h with
>
> # CONFIG_SCTP is not set
>
> was apparently safe, while not it breaks the build.
>
> I think the issue should be addressed here.
I just think it's not correct to include "net/sctp/sctp.h" if one doesn't
depend on SCTP module. I'd rather consider "net/sctp/sctp.h" as
part of SCTP module.
I can fix it by simply moving this function to like net/sctp/input.c, it
just doesn't look good. Anyway, maybe I will do it to solve the build
error in the current patch first.
Thanks.
>
> Thanks,
>
> Paolo
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 7/7] selftests: add a selftest for sctp vrf
2022-11-15 10:29 ` Paolo Abeni
@ 2022-11-15 15:33 ` Xin Long
2022-11-15 18:07 ` Xin Long
2022-11-15 20:40 ` Paolo Abeni
0 siblings, 2 replies; 16+ messages in thread
From: Xin Long @ 2022-11-15 15:33 UTC (permalink / raw)
To: Paolo Abeni
Cc: network dev, linux-sctp, davem, kuba, Eric Dumazet,
Marcelo Ricardo Leitner, Neil Horman, David Ahern, Carlo Carraro
On Tue, Nov 15, 2022 at 5:29 AM Paolo Abeni <pabeni@redhat.com> wrote:
>
> Hello,
>
> On Sun, 2022-11-13 at 11:44 -0500, Xin Long wrote:
> > This patch adds 12 small test cases: 01-04 test for the sysctl
> > net.sctp.l3mdev_accept. 05-10 test for only binding to a right
> > l3mdev device, the connection can be created. 11-12 test for
> > two socks binding to different l3mdev devices at the same time,
> > each of them can process the packets from the corresponding
> > peer. The tests run for both IPv4 and IPv6 SCTP.
> >
> > Signed-off-by: Xin Long <lucien.xin@gmail.com>
> > ---
> > tools/testing/selftests/net/Makefile | 2 +
> > tools/testing/selftests/net/sctp_hello.c | 139 ++++++++++++++++++++
> > tools/testing/selftests/net/sctp_vrf.sh | 160 +++++++++++++++++++++++
> > 3 files changed, 301 insertions(+)
> > create mode 100644 tools/testing/selftests/net/sctp_hello.c
> > create mode 100755 tools/testing/selftests/net/sctp_vrf.sh
> >
> > diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
> > index cec4800cb017..880e6ded6ed5 100644
> > --- a/tools/testing/selftests/net/Makefile
> > +++ b/tools/testing/selftests/net/Makefile
> > @@ -72,6 +72,8 @@ TEST_GEN_PROGS += sk_bind_sendto_listen
> > TEST_GEN_PROGS += sk_connect_zero_addr
> > TEST_PROGS += test_ingress_egress_chaining.sh
> > TEST_GEN_PROGS += so_incoming_cpu
> > +TEST_PROGS += sctp_vrf.sh
> > +TEST_GEN_FILES += sctp_hello
> >
> > TEST_FILES := settings
> >
> > diff --git a/tools/testing/selftests/net/sctp_hello.c b/tools/testing/selftests/net/sctp_hello.c
> > new file mode 100644
> > index 000000000000..58f763ca8b47
> > --- /dev/null
> > +++ b/tools/testing/selftests/net/sctp_hello.c
> > @@ -0,0 +1,139 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +#include <stdio.h>
> > +#include <stdlib.h>
> > +#include <string.h>
> > +#include <unistd.h>
> > +#include <sys/types.h>
> > +#include <netinet/in.h>
> > +#include <arpa/inet.h>
> > +
> > +static void set_addr(struct sockaddr_storage *ss, char *ip, char *port, int *len)
> > +{
> > + if (ss->ss_family == AF_INET) {
> > + struct sockaddr_in *a = (struct sockaddr_in *)ss;
> > +
> > + a->sin_addr.s_addr = inet_addr(ip);
> > + a->sin_port = htons(atoi(port));
> > + *len = sizeof(*a);
> > + } else {
> > + struct sockaddr_in6 *a = (struct sockaddr_in6 *)ss;
> > +
> > + a->sin6_family = AF_INET6;
> > + inet_pton(AF_INET6, ip, &a->sin6_addr);
> > + a->sin6_port = htons(atoi(port));
> > + *len = sizeof(*a);
> > + }
> > +}
> > +
> > +static int do_client(int argc, char *argv[])
> > +{
> > + struct sockaddr_storage ss;
> > + char buf[] = "hello";
> > + int csk, ret, len;
> > +
> > + if (argc < 5) {
> > + printf("%s client -4|6 IP PORT [IP PORT]\n", argv[0]);
> > + return -1;
> > + }
> > +
> > + bzero((void *)&ss, sizeof(ss));
> > + ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
> > + csk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
> > + if (csk < 0) {
> > + printf("failed to create socket\n");
> > + return -1;
> > + }
> > +
> > + if (argc >= 7) {
> > + set_addr(&ss, argv[5], argv[6], &len);
> > + ret = bind(csk, (struct sockaddr *)&ss, len);
> > + if (ret < 0) {
> > + printf("failed to bind to address\n");
> > + return -1;
> > + }
> > + }
> > +
> > + set_addr(&ss, argv[3], argv[4], &len);
> > + ret = connect(csk, (struct sockaddr *)&ss, len);
> > + if (ret < 0) {
> > + printf("failed to connect to peer\n");
> > + return -1;
> > + }
> > +
> > + ret = send(csk, buf, strlen(buf) + 1, 0);
> > + if (ret < 0) {
> > + printf("failed to send msg %d\n", ret);
> > + return -1;
> > + }
> > + sleep(1);
> > + close(csk);
> > +
> > + return 0;
> > +}
> > +
> > +int main(int argc, char *argv[])
> > +{
> > + struct sockaddr_storage ss;
> > + int lsk, csk, ret, len;
> > + char buf[20];
> > +
> > + if (argc < 2 || (strcmp(argv[1], "server") && strcmp(argv[1], "client"))) {
> > + printf("%s server|client ...\n", argv[0]);
> > + return -1;
> > + }
> > +
> > + if (!strcmp(argv[1], "client"))
> > + return do_client(argc, argv);
> > +
> > + if (argc < 5) {
> > + printf("%s server -4|6 IP PORT [IFACE]\n", argv[0]);
> > + return -1;
> > + }
> > +
> > + ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
> > + lsk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
> > + if (lsk < 0) {
> > + printf("failed to create lsk\n");
> > + return -1;
> > + }
> > +
> > + if (argc >= 6) {
> > + ret = setsockopt(lsk, SOL_SOCKET, SO_BINDTODEVICE,
> > + argv[5], strlen(argv[5]) + 1);
> > + if (ret < 0) {
> > + printf("failed to bind to device\n");
> > + return -1;
> > + }
> > + }
> > +
> > + set_addr(&ss, argv[3], argv[4], &len);
> > + ret = bind(lsk, (struct sockaddr *)&ss, len);
> > + if (ret < 0) {
> > + printf("failed to bind to address\n");
> > + return -1;
> > + }
> > +
> > + ret = listen(lsk, 5);
> > + if (ret < 0) {
> > + printf("failed to listen on port\n");
> > + return -1;
> > + }
> > +
> > + csk = accept(lsk, (struct sockaddr *)NULL, (socklen_t *)NULL);
> > + if (csk < 0) {
> > + printf("failed to accept new client\n");
> > + return -1;
> > + }
> > +
> > + ret = recv(csk, buf, sizeof(buf), 0);
> > + if (ret <= 0) {
> > + printf("failed to recv msg %d\n", ret);
> > + return -1;
> > + }
> > + sleep(2);
>
> Why do you need such sleep here? aren't blocking operations on socket
> enough?
>
> > + close(csk);
> > + close(lsk);
> > +
> > + return 0;
> > +}
> > diff --git a/tools/testing/selftests/net/sctp_vrf.sh b/tools/testing/selftests/net/sctp_vrf.sh
> > new file mode 100755
> > index 000000000000..310749f58386
> > --- /dev/null
> > +++ b/tools/testing/selftests/net/sctp_vrf.sh
> > @@ -0,0 +1,160 @@
> > +#!/bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +#
> > +# Testing For SCTP VRF.
> > +# TOPO: CLIENT_NS1 (veth1) <---> (veth1) -> vrf_s1
> > +# SERVER_NS
> > +# CLIENT_NS2 (veth1) <---> (veth2) -> vrf_s2
> > +
> > +CLIENT_NS1="client-ns1"
> > +CLIENT_NS2="client-ns2"
> > +CLIENT_IP4="10.0.0.1"
> > +CLIENT_IP6="2000::1"
> > +CLIENT_PORT=1234
> > +
> > +SERVER_NS="server-ns"
> > +SERVER_IP4="10.0.0.2"
> > +SERVER_IP6="2000::2"
> > +SERVER_PORT=1234
> > +
> > +setup() {
> > + modprobe sctp
> > + ip netns add $CLIENT_NS1
> > + ip netns add $CLIENT_NS2
> > + ip netns add $SERVER_NS
> > + ip -n $SERVER_NS link add veth1 type veth peer name veth1 netns $CLIENT_NS1
> > + ip -n $SERVER_NS link add veth2 type veth peer name veth1 netns $CLIENT_NS2
> > +
> > + ip -n $CLIENT_NS1 link set veth1 up
> > + ip -n $CLIENT_NS1 addr add $CLIENT_IP4/24 dev veth1
> > + ip -n $CLIENT_NS1 addr add $CLIENT_IP6/24 dev veth1
> > +
> > + ip -n $CLIENT_NS2 link set veth1 up
> > + ip -n $CLIENT_NS2 addr add $CLIENT_IP4/24 dev veth1
> > + ip -n $CLIENT_NS2 addr add $CLIENT_IP6/24 dev veth1
> > +
> > + ip -n $SERVER_NS link add dummy1 type dummy
> > + ip -n $SERVER_NS link set dummy1 up
> > + ip -n $SERVER_NS link add vrf-1 type vrf table 10
> > + ip -n $SERVER_NS link add vrf-2 type vrf table 20
> > + ip -n $SERVER_NS link set vrf-1 up
> > + ip -n $SERVER_NS link set vrf-2 up
> > + ip -n $SERVER_NS link set veth1 master vrf-1
> > + ip -n $SERVER_NS link set veth2 master vrf-2
> > +
> > + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev dummy1
> > + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth1
> > + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth2
> > + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev dummy1
> > + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth1
> > + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth2
> > +
> > + ip -n $SERVER_NS link set veth1 up
> > + ip -n $SERVER_NS link set veth2 up
> > + sleep 3
>
> I guess you need this 'sleep' to wait for dad completion on the above
> ipv6 addresses. If so, you can avoid the sleep adding 'nodad' to the ip
> route command line.
sounds good, I will give it a try.
>
> > + ip -n $SERVER_NS route add table 10 $CLIENT_IP4 dev veth1 src $SERVER_IP4
> > + ip -n $SERVER_NS route add table 20 $CLIENT_IP4 dev veth2 src $SERVER_IP4
> > + ip -n $SERVER_NS route add $CLIENT_IP4 dev veth1 src $SERVER_IP4
> > + ip -n $SERVER_NS route add table 10 $CLIENT_IP6 dev veth1 src $SERVER_IP6
> > + ip -n $SERVER_NS route add table 20 $CLIENT_IP6 dev veth2 src $SERVER_IP6
> > + ip -n $SERVER_NS route add $CLIENT_IP6 dev veth1 src $SERVER_IP6
> > +
> > + L3MDEV=`ip netns exec $SERVER_NS cat /proc/sys/net/sctp/l3mdev_accept`
> > +}
> > +
> > +cleanup() {
> > + ip netns exec $SERVER_NS echo $L3MDEV > /proc/sys/net/sctp/l3mdev_accept
> > + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> > + ip netns del "$CLIENT_NS1"
> > + ip netns del "$CLIENT_NS2"
> > + ip netns del "$SERVER_NS"
> > +}
> > +
> > +do_testx() {
> > + IFACE1=$1
> > + IFACE2=$2
> > +
> > + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> > + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> > + $SERVER_PORT $IFACE1 2>&1 >/dev/null &
> > + disown
> > + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> > + $SERVER_PORT $IFACE2 2>&1 >/dev/null &
> > + disown
> > + sleep 1
>
> Altertantivelly you can wait untill the relevant sctp socket is liste
> by 'ss' output, it would be more roboust.
right, this one looks better :-).
>
> > + timeout 3 ip netns exec $CLIENT_NS1 ./sctp_hello client $AF \
> > + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null && \
> > + timeout 3 ip netns exec $CLIENT_NS2 ./sctp_hello client $AF \
> > + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
> > +}
> > +
> > +do_test() {
> > + CLIENT_NS=$1
> > + IFACE=$2
> > +
> > + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> > + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> > + $SERVER_PORT $IFACE 2>&1 >/dev/null &
> > + disown
> > + sleep 1
> > + timeout 3 ip netns exec $CLIENT_NS ./sctp_hello client $AF \
> > + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
> > +}
> > +
> > +testup() {
> > + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=1 2>&1 >/dev/null
> > + echo -n "TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y "
> > + do_test $CLIENT_NS1 || { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 02: nobind, connect from client 2, l3mdev_accept=1, N "
> > + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=0 2>&1 >/dev/null
> > + echo -n "TEST 03: nobind, connect from client 1, l3mdev_accept=0, N "
> > + do_test $CLIENT_NS1 && { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 04: nobind, connect from client 2, l3mdev_accept=0, N "
> > + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 05: bind veth2 in server, connect from client 1, N "
> > + do_test $CLIENT_NS1 veth2 && { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 06: bind veth1 in server, connect from client 1, Y "
> > + do_test $CLIENT_NS1 veth1 || { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 07: bind vrf-1 in server, connect from client 1, Y "
> > + do_test $CLIENT_NS1 vrf-1 || { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 08: bind vrf-2 in server, connect from client 1, N "
> > + do_test $CLIENT_NS1 vrf-2 && { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 09: bind vrf-2 in server, connect from client 2, Y "
> > + do_test $CLIENT_NS2 vrf-2 || { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 10: bind vrf-1 in server, connect from client 2, N "
> > + do_test $CLIENT_NS2 vrf-1 && { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 11: bind vrf-1 & 2 in server, connect from client 1 & 2, Y "
> > + do_testx vrf-1 vrf-2 || { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +
> > + echo -n "TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N "
> > + do_testx vrf-2 vrf-1 || { echo "[FAIL]"; return 1; }
> > + echo "[PASS]"
> > +}
> > +
> > +trap cleanup EXIT
> > +setup || exit $?
> > +echo "Testing For SCTP VRF:"
> > +CLIENT_IP=$CLIENT_IP4 SERVER_IP=$SERVER_IP4 AF="-4" testup && echo "***v4 Tests Done***" &&
> > +CLIENT_IP=$CLIENT_IP6 SERVER_IP=$SERVER_IP6 AF="-6" testup && echo "***v6 Tests Done***"
>
> To properly integrate with the self-test suite, you need to ensure that
> the script exits with an error code in case of failure, e.g. storing
> the error in a global variable 'ret' and adding a final:
>
> exit $ret
the above lines are equal to "exit $ret".
the exit code in testup() will return if it's not 0.
Do you mean I should make it more clear?
Thanks for the review.
>
> Cheers,
>
> Paolo
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 7/7] selftests: add a selftest for sctp vrf
2022-11-15 15:33 ` Xin Long
@ 2022-11-15 18:07 ` Xin Long
2022-11-15 20:40 ` Paolo Abeni
1 sibling, 0 replies; 16+ messages in thread
From: Xin Long @ 2022-11-15 18:07 UTC (permalink / raw)
To: Paolo Abeni
Cc: network dev, linux-sctp, davem, kuba, Eric Dumazet,
Marcelo Ricardo Leitner, Neil Horman, David Ahern, Carlo Carraro
On Tue, Nov 15, 2022 at 10:33 AM Xin Long <lucien.xin@gmail.com> wrote:
>
> On Tue, Nov 15, 2022 at 5:29 AM Paolo Abeni <pabeni@redhat.com> wrote:
> >
> > Hello,
> >
> > On Sun, 2022-11-13 at 11:44 -0500, Xin Long wrote:
> > > This patch adds 12 small test cases: 01-04 test for the sysctl
> > > net.sctp.l3mdev_accept. 05-10 test for only binding to a right
> > > l3mdev device, the connection can be created. 11-12 test for
> > > two socks binding to different l3mdev devices at the same time,
> > > each of them can process the packets from the corresponding
> > > peer. The tests run for both IPv4 and IPv6 SCTP.
> > >
> > > Signed-off-by: Xin Long <lucien.xin@gmail.com>
> > > ---
> > > tools/testing/selftests/net/Makefile | 2 +
> > > tools/testing/selftests/net/sctp_hello.c | 139 ++++++++++++++++++++
> > > tools/testing/selftests/net/sctp_vrf.sh | 160 +++++++++++++++++++++++
> > > 3 files changed, 301 insertions(+)
> > > create mode 100644 tools/testing/selftests/net/sctp_hello.c
> > > create mode 100755 tools/testing/selftests/net/sctp_vrf.sh
> > >
> > > diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
> > > index cec4800cb017..880e6ded6ed5 100644
> > > --- a/tools/testing/selftests/net/Makefile
> > > +++ b/tools/testing/selftests/net/Makefile
> > > @@ -72,6 +72,8 @@ TEST_GEN_PROGS += sk_bind_sendto_listen
> > > TEST_GEN_PROGS += sk_connect_zero_addr
> > > TEST_PROGS += test_ingress_egress_chaining.sh
> > > TEST_GEN_PROGS += so_incoming_cpu
> > > +TEST_PROGS += sctp_vrf.sh
> > > +TEST_GEN_FILES += sctp_hello
> > >
> > > TEST_FILES := settings
> > >
> > > diff --git a/tools/testing/selftests/net/sctp_hello.c b/tools/testing/selftests/net/sctp_hello.c
> > > new file mode 100644
> > > index 000000000000..58f763ca8b47
> > > --- /dev/null
> > > +++ b/tools/testing/selftests/net/sctp_hello.c
> > > @@ -0,0 +1,139 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +
> > > +#include <stdio.h>
> > > +#include <stdlib.h>
> > > +#include <string.h>
> > > +#include <unistd.h>
> > > +#include <sys/types.h>
> > > +#include <netinet/in.h>
> > > +#include <arpa/inet.h>
> > > +
> > > +static void set_addr(struct sockaddr_storage *ss, char *ip, char *port, int *len)
> > > +{
> > > + if (ss->ss_family == AF_INET) {
> > > + struct sockaddr_in *a = (struct sockaddr_in *)ss;
> > > +
> > > + a->sin_addr.s_addr = inet_addr(ip);
> > > + a->sin_port = htons(atoi(port));
> > > + *len = sizeof(*a);
> > > + } else {
> > > + struct sockaddr_in6 *a = (struct sockaddr_in6 *)ss;
> > > +
> > > + a->sin6_family = AF_INET6;
> > > + inet_pton(AF_INET6, ip, &a->sin6_addr);
> > > + a->sin6_port = htons(atoi(port));
> > > + *len = sizeof(*a);
> > > + }
> > > +}
> > > +
> > > +static int do_client(int argc, char *argv[])
> > > +{
> > > + struct sockaddr_storage ss;
> > > + char buf[] = "hello";
> > > + int csk, ret, len;
> > > +
> > > + if (argc < 5) {
> > > + printf("%s client -4|6 IP PORT [IP PORT]\n", argv[0]);
> > > + return -1;
> > > + }
> > > +
> > > + bzero((void *)&ss, sizeof(ss));
> > > + ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
> > > + csk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
> > > + if (csk < 0) {
> > > + printf("failed to create socket\n");
> > > + return -1;
> > > + }
> > > +
> > > + if (argc >= 7) {
> > > + set_addr(&ss, argv[5], argv[6], &len);
> > > + ret = bind(csk, (struct sockaddr *)&ss, len);
> > > + if (ret < 0) {
> > > + printf("failed to bind to address\n");
> > > + return -1;
> > > + }
> > > + }
> > > +
> > > + set_addr(&ss, argv[3], argv[4], &len);
> > > + ret = connect(csk, (struct sockaddr *)&ss, len);
> > > + if (ret < 0) {
> > > + printf("failed to connect to peer\n");
> > > + return -1;
> > > + }
> > > +
> > > + ret = send(csk, buf, strlen(buf) + 1, 0);
> > > + if (ret < 0) {
> > > + printf("failed to send msg %d\n", ret);
> > > + return -1;
> > > + }
> > > + sleep(1);
> > > + close(csk);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +int main(int argc, char *argv[])
> > > +{
> > > + struct sockaddr_storage ss;
> > > + int lsk, csk, ret, len;
> > > + char buf[20];
> > > +
> > > + if (argc < 2 || (strcmp(argv[1], "server") && strcmp(argv[1], "client"))) {
> > > + printf("%s server|client ...\n", argv[0]);
> > > + return -1;
> > > + }
> > > +
> > > + if (!strcmp(argv[1], "client"))
> > > + return do_client(argc, argv);
> > > +
> > > + if (argc < 5) {
> > > + printf("%s server -4|6 IP PORT [IFACE]\n", argv[0]);
> > > + return -1;
> > > + }
> > > +
> > > + ss.ss_family = !strcmp(argv[2], "-4") ? AF_INET : AF_INET6;
> > > + lsk = socket(ss.ss_family, SOCK_STREAM, IPPROTO_SCTP);
> > > + if (lsk < 0) {
> > > + printf("failed to create lsk\n");
> > > + return -1;
> > > + }
> > > +
> > > + if (argc >= 6) {
> > > + ret = setsockopt(lsk, SOL_SOCKET, SO_BINDTODEVICE,
> > > + argv[5], strlen(argv[5]) + 1);
> > > + if (ret < 0) {
> > > + printf("failed to bind to device\n");
> > > + return -1;
> > > + }
> > > + }
> > > +
> > > + set_addr(&ss, argv[3], argv[4], &len);
> > > + ret = bind(lsk, (struct sockaddr *)&ss, len);
> > > + if (ret < 0) {
> > > + printf("failed to bind to address\n");
> > > + return -1;
> > > + }
> > > +
> > > + ret = listen(lsk, 5);
> > > + if (ret < 0) {
> > > + printf("failed to listen on port\n");
> > > + return -1;
> > > + }
> > > +
> > > + csk = accept(lsk, (struct sockaddr *)NULL, (socklen_t *)NULL);
> > > + if (csk < 0) {
> > > + printf("failed to accept new client\n");
> > > + return -1;
> > > + }
> > > +
> > > + ret = recv(csk, buf, sizeof(buf), 0);
> > > + if (ret <= 0) {
> > > + printf("failed to recv msg %d\n", ret);
> > > + return -1;
> > > + }
> > > + sleep(2);
> >
> > Why do you need such sleep here? aren't blocking operations on socket
> > enough?
Sorry, forgot to reply to this one.
I was expecting to close it from the client side.
But it seems fine to close it by the server side, I will delete this
sleep and leave sleep(1) on the client only.
Thanks.
> >
> > > + close(csk);
> > > + close(lsk);
> > > +
> > > + return 0;
> > > +}
> > > diff --git a/tools/testing/selftests/net/sctp_vrf.sh b/tools/testing/selftests/net/sctp_vrf.sh
> > > new file mode 100755
> > > index 000000000000..310749f58386
> > > --- /dev/null
> > > +++ b/tools/testing/selftests/net/sctp_vrf.sh
> > > @@ -0,0 +1,160 @@
> > > +#!/bin/bash
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +#
> > > +# Testing For SCTP VRF.
> > > +# TOPO: CLIENT_NS1 (veth1) <---> (veth1) -> vrf_s1
> > > +# SERVER_NS
> > > +# CLIENT_NS2 (veth1) <---> (veth2) -> vrf_s2
> > > +
> > > +CLIENT_NS1="client-ns1"
> > > +CLIENT_NS2="client-ns2"
> > > +CLIENT_IP4="10.0.0.1"
> > > +CLIENT_IP6="2000::1"
> > > +CLIENT_PORT=1234
> > > +
> > > +SERVER_NS="server-ns"
> > > +SERVER_IP4="10.0.0.2"
> > > +SERVER_IP6="2000::2"
> > > +SERVER_PORT=1234
> > > +
> > > +setup() {
> > > + modprobe sctp
> > > + ip netns add $CLIENT_NS1
> > > + ip netns add $CLIENT_NS2
> > > + ip netns add $SERVER_NS
> > > + ip -n $SERVER_NS link add veth1 type veth peer name veth1 netns $CLIENT_NS1
> > > + ip -n $SERVER_NS link add veth2 type veth peer name veth1 netns $CLIENT_NS2
> > > +
> > > + ip -n $CLIENT_NS1 link set veth1 up
> > > + ip -n $CLIENT_NS1 addr add $CLIENT_IP4/24 dev veth1
> > > + ip -n $CLIENT_NS1 addr add $CLIENT_IP6/24 dev veth1
> > > +
> > > + ip -n $CLIENT_NS2 link set veth1 up
> > > + ip -n $CLIENT_NS2 addr add $CLIENT_IP4/24 dev veth1
> > > + ip -n $CLIENT_NS2 addr add $CLIENT_IP6/24 dev veth1
> > > +
> > > + ip -n $SERVER_NS link add dummy1 type dummy
> > > + ip -n $SERVER_NS link set dummy1 up
> > > + ip -n $SERVER_NS link add vrf-1 type vrf table 10
> > > + ip -n $SERVER_NS link add vrf-2 type vrf table 20
> > > + ip -n $SERVER_NS link set vrf-1 up
> > > + ip -n $SERVER_NS link set vrf-2 up
> > > + ip -n $SERVER_NS link set veth1 master vrf-1
> > > + ip -n $SERVER_NS link set veth2 master vrf-2
> > > +
> > > + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev dummy1
> > > + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth1
> > > + ip -n $SERVER_NS addr add $SERVER_IP4/24 dev veth2
> > > + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev dummy1
> > > + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth1
> > > + ip -n $SERVER_NS addr add $SERVER_IP6/24 dev veth2
> > > +
> > > + ip -n $SERVER_NS link set veth1 up
> > > + ip -n $SERVER_NS link set veth2 up
> > > + sleep 3
> >
> > I guess you need this 'sleep' to wait for dad completion on the above
> > ipv6 addresses. If so, you can avoid the sleep adding 'nodad' to the ip
> > route command line.
> sounds good, I will give it a try.
>
> >
> > > + ip -n $SERVER_NS route add table 10 $CLIENT_IP4 dev veth1 src $SERVER_IP4
> > > + ip -n $SERVER_NS route add table 20 $CLIENT_IP4 dev veth2 src $SERVER_IP4
> > > + ip -n $SERVER_NS route add $CLIENT_IP4 dev veth1 src $SERVER_IP4
> > > + ip -n $SERVER_NS route add table 10 $CLIENT_IP6 dev veth1 src $SERVER_IP6
> > > + ip -n $SERVER_NS route add table 20 $CLIENT_IP6 dev veth2 src $SERVER_IP6
> > > + ip -n $SERVER_NS route add $CLIENT_IP6 dev veth1 src $SERVER_IP6
> > > +
> > > + L3MDEV=`ip netns exec $SERVER_NS cat /proc/sys/net/sctp/l3mdev_accept`
> > > +}
> > > +
> > > +cleanup() {
> > > + ip netns exec $SERVER_NS echo $L3MDEV > /proc/sys/net/sctp/l3mdev_accept
> > > + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> > > + ip netns del "$CLIENT_NS1"
> > > + ip netns del "$CLIENT_NS2"
> > > + ip netns del "$SERVER_NS"
> > > +}
> > > +
> > > +do_testx() {
> > > + IFACE1=$1
> > > + IFACE2=$2
> > > +
> > > + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> > > + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> > > + $SERVER_PORT $IFACE1 2>&1 >/dev/null &
> > > + disown
> > > + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> > > + $SERVER_PORT $IFACE2 2>&1 >/dev/null &
> > > + disown
> > > + sleep 1
> >
> > Altertantivelly you can wait untill the relevant sctp socket is liste
> > by 'ss' output, it would be more roboust.
> right, this one looks better :-).
> >
> > > + timeout 3 ip netns exec $CLIENT_NS1 ./sctp_hello client $AF \
> > > + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null && \
> > > + timeout 3 ip netns exec $CLIENT_NS2 ./sctp_hello client $AF \
> > > + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
> > > +}
> > > +
> > > +do_test() {
> > > + CLIENT_NS=$1
> > > + IFACE=$2
> > > +
> > > + ip netns exec $SERVER_NS pkill sctp_hello 2>&1 >/dev/null
> > > + ip netns exec $SERVER_NS ./sctp_hello server $AF $SERVER_IP \
> > > + $SERVER_PORT $IFACE 2>&1 >/dev/null &
> > > + disown
> > > + sleep 1
> > > + timeout 3 ip netns exec $CLIENT_NS ./sctp_hello client $AF \
> > > + $SERVER_IP $SERVER_PORT $CLIENT_IP $CLIENT_PORT 2>&1 >/dev/null
> > > +}
> > > +
> > > +testup() {
> > > + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=1 2>&1 >/dev/null
> > > + echo -n "TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y "
> > > + do_test $CLIENT_NS1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 02: nobind, connect from client 2, l3mdev_accept=1, N "
> > > + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=0 2>&1 >/dev/null
> > > + echo -n "TEST 03: nobind, connect from client 1, l3mdev_accept=0, N "
> > > + do_test $CLIENT_NS1 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 04: nobind, connect from client 2, l3mdev_accept=0, N "
> > > + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 05: bind veth2 in server, connect from client 1, N "
> > > + do_test $CLIENT_NS1 veth2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 06: bind veth1 in server, connect from client 1, Y "
> > > + do_test $CLIENT_NS1 veth1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 07: bind vrf-1 in server, connect from client 1, Y "
> > > + do_test $CLIENT_NS1 vrf-1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 08: bind vrf-2 in server, connect from client 1, N "
> > > + do_test $CLIENT_NS1 vrf-2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 09: bind vrf-2 in server, connect from client 2, Y "
> > > + do_test $CLIENT_NS2 vrf-2 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 10: bind vrf-1 in server, connect from client 2, N "
> > > + do_test $CLIENT_NS2 vrf-1 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 11: bind vrf-1 & 2 in server, connect from client 1 & 2, Y "
> > > + do_testx vrf-1 vrf-2 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N "
> > > + do_testx vrf-2 vrf-1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +}
> > > +
> > > +trap cleanup EXIT
> > > +setup || exit $?
> > > +echo "Testing For SCTP VRF:"
> > > +CLIENT_IP=$CLIENT_IP4 SERVER_IP=$SERVER_IP4 AF="-4" testup && echo "***v4 Tests Done***" &&
> > > +CLIENT_IP=$CLIENT_IP6 SERVER_IP=$SERVER_IP6 AF="-6" testup && echo "***v6 Tests Done***"
> >
> > To properly integrate with the self-test suite, you need to ensure that
> > the script exits with an error code in case of failure, e.g. storing
> > the error in a global variable 'ret' and adding a final:
> >
> > exit $ret
> the above lines are equal to "exit $ret".
> the exit code in testup() will return if it's not 0.
> Do you mean I should make it more clear?
>
> Thanks for the review.
> >
> > Cheers,
> >
> > Paolo
> >
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next 7/7] selftests: add a selftest for sctp vrf
2022-11-15 15:33 ` Xin Long
2022-11-15 18:07 ` Xin Long
@ 2022-11-15 20:40 ` Paolo Abeni
1 sibling, 0 replies; 16+ messages in thread
From: Paolo Abeni @ 2022-11-15 20:40 UTC (permalink / raw)
To: Xin Long
Cc: network dev, linux-sctp, davem, kuba, Eric Dumazet,
Marcelo Ricardo Leitner, Neil Horman, David Ahern, Carlo Carraro
On Tue, 2022-11-15 at 10:33 -0500, Xin Long wrote:
> On Tue, Nov 15, 2022 at 5:29 AM Paolo Abeni <pabeni@redhat.com> wrote:
> > On Sun, 2022-11-13 at 11:44 -0500, Xin Long wrote:
> >
> > > +testup() {
> > > + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=1 2>&1 >/dev/null
> > > + echo -n "TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y "
> > > + do_test $CLIENT_NS1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 02: nobind, connect from client 2, l3mdev_accept=1, N "
> > > + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + ip netns exec $SERVER_NS sysctl -w net.sctp.l3mdev_accept=0 2>&1 >/dev/null
> > > + echo -n "TEST 03: nobind, connect from client 1, l3mdev_accept=0, N "
> > > + do_test $CLIENT_NS1 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 04: nobind, connect from client 2, l3mdev_accept=0, N "
> > > + do_test $CLIENT_NS2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 05: bind veth2 in server, connect from client 1, N "
> > > + do_test $CLIENT_NS1 veth2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 06: bind veth1 in server, connect from client 1, Y "
> > > + do_test $CLIENT_NS1 veth1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 07: bind vrf-1 in server, connect from client 1, Y "
> > > + do_test $CLIENT_NS1 vrf-1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 08: bind vrf-2 in server, connect from client 1, N "
> > > + do_test $CLIENT_NS1 vrf-2 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 09: bind vrf-2 in server, connect from client 2, Y "
> > > + do_test $CLIENT_NS2 vrf-2 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 10: bind vrf-1 in server, connect from client 2, N "
> > > + do_test $CLIENT_NS2 vrf-1 && { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 11: bind vrf-1 & 2 in server, connect from client 1 & 2, Y "
> > > + do_testx vrf-1 vrf-2 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +
> > > + echo -n "TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N "
> > > + do_testx vrf-2 vrf-1 || { echo "[FAIL]"; return 1; }
> > > + echo "[PASS]"
> > > +}
> > > +
> > > +trap cleanup EXIT
> > > +setup || exit $?
> > > +echo "Testing For SCTP VRF:"
> > > +CLIENT_IP=$CLIENT_IP4 SERVER_IP=$SERVER_IP4 AF="-4" testup && echo "***v4 Tests Done***" &&
> > > +CLIENT_IP=$CLIENT_IP6 SERVER_IP=$SERVER_IP6 AF="-6" testup && echo "***v6 Tests Done***"
> >
> > To properly integrate with the self-test suite, you need to ensure that
> > the script exits with an error code in case of failure, e.g. storing
> > the error in a global variable 'ret' and adding a final:
> >
> > exit $ret
> the above lines are equal to "exit $ret".
> the exit code in testup() will return if it's not 0.
> Do you mean I should make it more clear?
I admit I initially did not notice that the posted code is equivalent
to
exit $ret
so perhaps make it more explicit could help :) Not a big deal anyway.
Thanks,
Paolo
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2022-11-15 20:42 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-13 16:44 [PATCH net-next 0/7] sctp: support vrf processing Xin Long
2022-11-13 16:44 ` [PATCH net-next 1/7] sctp: verify the bind address with the tb_id from l3mdev Xin Long
2022-11-13 16:44 ` [PATCH net-next 2/7] sctp: check ipv6 addr with sk_bound_dev if set Xin Long
2022-11-13 16:44 ` [PATCH net-next 3/7] sctp: check sk_bound_dev_if when matching ep in get_port Xin Long
2022-11-13 16:44 ` [PATCH net-next 4/7] sctp: add skb_sdif in struct sctp_af Xin Long
2022-11-13 16:44 ` [PATCH net-next 5/7] sctp: add dif and sdif check in asoc and ep lookup Xin Long
2022-11-13 20:14 ` kernel test robot
2022-11-15 2:38 ` Xin Long
2022-11-15 10:19 ` Paolo Abeni
2022-11-15 15:25 ` Xin Long
2022-11-13 16:44 ` [PATCH net-next 6/7] sctp: add sysctl net.sctp.l3mdev_accept Xin Long
2022-11-13 16:44 ` [PATCH net-next 7/7] selftests: add a selftest for sctp vrf Xin Long
2022-11-15 10:29 ` Paolo Abeni
2022-11-15 15:33 ` Xin Long
2022-11-15 18:07 ` Xin Long
2022-11-15 20:40 ` Paolo Abeni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.