From: Maxime Ripard <maxime.ripard@free-electrons.com> To: Rob Herring <robh+dt@kernel.org>, Daniel Vetter <daniel.vetter@intel.com>, David Airlie <airlied@linux.ie>, Archit Taneja <architt@codeaurora.org> Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime.ripard@free-electrons.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 0/5] drm: Add Support for Passive RGB to VGA bridges Date: Thu, 6 Oct 2016 09:57:04 +0200 [thread overview] Message-ID: <cover.2ec28e2292f37131839babc08427ef9f1aece26a.1475740611.git-series.maxime.ripard@free-electrons.com> (raw) Hi, This serie is about adding support for the RGB to VGA bridge found in the A13-Olinuxino and the CHIP VGA adapter. Both these boards rely on an entirely passive bridge made out of resitor ladders that do not require any initialisation. The only thing needed is to get the timings from the screen if available (and if not, fall back on XGA standards), set up the display pipeline to output on the RGB bus with the proper timings, and you're done. This serie also fixes a bunch of bugs uncovered when trying to increase the resolution, and hence the pixel clock, of our pipeline. It also fixes a few bugs in the DRM driver itself that went unnoticed before. Let me know what you think, Maxime Changes from v5: - Renamed to simple-vga-dac Changes from v4: - Removed unused functions Changes from v3: - Depends on OF in Kconfig - Fixed typos in the driver comments - Removed the mention of a "passive" bridge in the bindings doc - Made the strcuture const - Removed the nops and best_encoders implementations - Removed the call to drm_bridge_enable in the sun4i driver Changes from v2: - Changed the compatible as suggested - Rebased on top 4.8 Changes from v1: - Switch to using a vga-connector - Use drm_encoder bridge pointer instead of doing our own - Report the connector status as unknown instead of connected by default, and as connected only if we can retrieve the EDID. - Switch to of_i2c_get_adapter by node, and put the reference when done - Rebased on linux-next Maxime Ripard (5): drm/sun4i: rgb: Remove the bridge enable/disable functions drm/bridge: Add RGB to VGA bridge support ARM: sun5i: a13-olinuxino: Enable VGA bridge ARM: multi_v7: enable VGA bridge ARM: sunxi: Enable VGA bridge .../bindings/display/bridge/rgb-to-vga-bridge.txt | 48 +++++ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 54 +++++ arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/configs/sunxi_defconfig | 1 + drivers/gpu/drm/bridge/Kconfig | 7 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/rgb-to-vga.c | 229 +++++++++++++++++++++ drivers/gpu/drm/sun4i/sun4i_rgb.c | 6 - 8 files changed, 341 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.txt create mode 100644 drivers/gpu/drm/bridge/rgb-to-vga.c -- 2.9.3 Maxime Ripard (5): drm/sun4i: rgb: Remove the bridge enable/disable functions drm/bridge: Add RGB to VGA bridge support ARM: sun5i: a13-olinuxino: Enable VGA bridge ARM: multi_v7: enable VGA bridge ARM: sunxi: Enable VGA bridge Documentation/devicetree/bindings/display/bridge/simple-vga-dac.txt | 48 +++++++++++++++- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 54 +++++++++++++++++- arch/arm/configs/multi_v7_defconfig | 1 +- arch/arm/configs/sunxi_defconfig | 1 +- drivers/gpu/drm/bridge/Kconfig | 7 ++- drivers/gpu/drm/bridge/Makefile | 1 +- drivers/gpu/drm/bridge/simple-vga-dac.c | 229 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/sun4i/sun4i_rgb.c | 6 +-- 8 files changed, 341 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/simple-vga-dac.txt create mode 100644 drivers/gpu/drm/bridge/simple-vga-dac.c -- git-series 0.8.10 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 0/5] drm: Add Support for Passive RGB to VGA bridges Date: Thu, 6 Oct 2016 09:57:04 +0200 [thread overview] Message-ID: <cover.2ec28e2292f37131839babc08427ef9f1aece26a.1475740611.git-series.maxime.ripard@free-electrons.com> (raw) Hi, This serie is about adding support for the RGB to VGA bridge found in the A13-Olinuxino and the CHIP VGA adapter. Both these boards rely on an entirely passive bridge made out of resitor ladders that do not require any initialisation. The only thing needed is to get the timings from the screen if available (and if not, fall back on XGA standards), set up the display pipeline to output on the RGB bus with the proper timings, and you're done. This serie also fixes a bunch of bugs uncovered when trying to increase the resolution, and hence the pixel clock, of our pipeline. It also fixes a few bugs in the DRM driver itself that went unnoticed before. Let me know what you think, Maxime Changes from v5: - Renamed to simple-vga-dac Changes from v4: - Removed unused functions Changes from v3: - Depends on OF in Kconfig - Fixed typos in the driver comments - Removed the mention of a "passive" bridge in the bindings doc - Made the strcuture const - Removed the nops and best_encoders implementations - Removed the call to drm_bridge_enable in the sun4i driver Changes from v2: - Changed the compatible as suggested - Rebased on top 4.8 Changes from v1: - Switch to using a vga-connector - Use drm_encoder bridge pointer instead of doing our own - Report the connector status as unknown instead of connected by default, and as connected only if we can retrieve the EDID. - Switch to of_i2c_get_adapter by node, and put the reference when done - Rebased on linux-next Maxime Ripard (5): drm/sun4i: rgb: Remove the bridge enable/disable functions drm/bridge: Add RGB to VGA bridge support ARM: sun5i: a13-olinuxino: Enable VGA bridge ARM: multi_v7: enable VGA bridge ARM: sunxi: Enable VGA bridge .../bindings/display/bridge/rgb-to-vga-bridge.txt | 48 +++++ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 54 +++++ arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/configs/sunxi_defconfig | 1 + drivers/gpu/drm/bridge/Kconfig | 7 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/rgb-to-vga.c | 229 +++++++++++++++++++++ drivers/gpu/drm/sun4i/sun4i_rgb.c | 6 - 8 files changed, 341 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.txt create mode 100644 drivers/gpu/drm/bridge/rgb-to-vga.c -- 2.9.3 Maxime Ripard (5): drm/sun4i: rgb: Remove the bridge enable/disable functions drm/bridge: Add RGB to VGA bridge support ARM: sun5i: a13-olinuxino: Enable VGA bridge ARM: multi_v7: enable VGA bridge ARM: sunxi: Enable VGA bridge Documentation/devicetree/bindings/display/bridge/simple-vga-dac.txt | 48 +++++++++++++++- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 54 +++++++++++++++++- arch/arm/configs/multi_v7_defconfig | 1 +- arch/arm/configs/sunxi_defconfig | 1 +- drivers/gpu/drm/bridge/Kconfig | 7 ++- drivers/gpu/drm/bridge/Makefile | 1 +- drivers/gpu/drm/bridge/simple-vga-dac.c | 229 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/sun4i/sun4i_rgb.c | 6 +-- 8 files changed, 341 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/simple-vga-dac.txt create mode 100644 drivers/gpu/drm/bridge/simple-vga-dac.c -- git-series 0.8.10
next reply other threads:[~2016-10-06 7:57 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-10-06 7:57 Maxime Ripard [this message] 2016-10-06 7:57 ` [PATCH v6 0/5] drm: Add Support for Passive RGB to VGA bridges Maxime Ripard 2016-10-06 7:57 ` [PATCH v6 1/5] drm/sun4i: rgb: Remove the bridge enable/disable functions Maxime Ripard 2016-10-06 7:57 ` Maxime Ripard 2016-10-06 19:43 ` Sean Paul 2016-10-06 19:43 ` Sean Paul 2016-10-10 8:31 ` Maxime Ripard 2016-10-10 8:31 ` Maxime Ripard 2016-10-06 7:57 ` [PATCH v6 2/5] drm/bridge: Add RGB to VGA bridge support Maxime Ripard 2016-10-06 7:57 ` Maxime Ripard [not found] ` <cover.2ec28e2292f37131839babc08427ef9f1aece26a.1475740611.git-series.maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> 2016-10-06 7:57 ` [PATCH v6 3/5] ARM: sun5i: a13-olinuxino: Enable VGA bridge Maxime Ripard 2016-10-06 7:57 ` Maxime Ripard 2016-10-06 7:57 ` [PATCH v6 4/5] ARM: multi_v7: enable " Maxime Ripard 2016-10-06 7:57 ` Maxime Ripard 2016-10-06 7:57 ` [PATCH v6 5/5] ARM: sunxi: Enable " Maxime Ripard 2016-10-06 7:57 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.2ec28e2292f37131839babc08427ef9f1aece26a.1475740611.git-series.maxime.ripard@free-electrons.com \ --to=maxime.ripard@free-electrons.com \ --cc=airlied@linux.ie \ --cc=architt@codeaurora.org \ --cc=daniel.vetter@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.