[PATCH 0/9] Add support for SPEAr13xx SoCs

[PATCH 0/9] Add support for SPEAr13xx SoCs

[Viresh Kumar]

Arnd,

Sorry for yet another patchset for you :(

This one adds in support for SPEAr1310 and SPEAr1340. It supports:
- DT probing
- pinctrl drivers
- common clock framework

All you requested to get this upstream. :)

I have CC-ed Linus and Mike for their patches and would ask them for their Acks,
as this would evantually make through your ARM-SoC tree.

Few devices/drivers mentioned in dts files have their DT probing patches under
review.

Viresh Kumar (9):
  SPEAr13xx: Add header files
  SPEAr13xx: Add source files
  SPEAr13xx: Add common clock framework support
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  pinctrl: Add SPEAr13xx pinctrl drivers
  SPEAr13xx: Add dts and dtsi files
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add defconfig
  SPEAr: Update MAINTAINERS and Documentation

 Documentation/arm/SPEAr/overview.txt               |   32 +-
 Documentation/devicetree/bindings/arm/spear.txt    |   14 +-
 .../devicetree/bindings/pinctrl/pinctrl_spear.txt  |   47 +
 MAINTAINERS                                        |   13 +
 arch/arm/Makefile                                  |    2 +
 arch/arm/boot/dts/spear1310-evb.dts                |  267 +++
 arch/arm/boot/dts/spear1310.dtsi                   |  184 ++
 arch/arm/boot/dts/spear1340-evb.dts                |  291 +++
 arch/arm/boot/dts/spear1340.dtsi                   |   56 +
 arch/arm/boot/dts/spear13xx.dtsi                   |  258 +++
 arch/arm/configs/spear13xx_defconfig               |   91 +
 arch/arm/mach-spear13xx/Kconfig                    |   20 +
 arch/arm/mach-spear13xx/Makefile                   |   10 +
 arch/arm/mach-spear13xx/Makefile.boot              |    6 +
 arch/arm/mach-spear13xx/headsmp.S                  |   47 +
 arch/arm/mach-spear13xx/hotplug.c                  |  119 ++
 arch/arm/mach-spear13xx/include/mach/debug-macro.S |   14 +
 arch/arm/mach-spear13xx/include/mach/dma.h         |  128 ++
 arch/arm/mach-spear13xx/include/mach/generic.h     |   49 +
 arch/arm/mach-spear13xx/include/mach/gpio.h        |   19 +
 arch/arm/mach-spear13xx/include/mach/hardware.h    |    1 +
 arch/arm/mach-spear13xx/include/mach/irqs.h        |   23 +
 arch/arm/mach-spear13xx/include/mach/spear.h       |  173 ++
 arch/arm/mach-spear13xx/include/mach/timex.h       |   19 +
 arch/arm/mach-spear13xx/include/mach/uncompress.h  |   19 +
 arch/arm/mach-spear13xx/platsmp.c                  |  127 ++
 arch/arm/mach-spear13xx/spear1310.c                |   88 +
 arch/arm/mach-spear13xx/spear1340.c                |  192 ++
 arch/arm/mach-spear13xx/spear13xx.c                |  210 ++
 arch/arm/plat-spear/Kconfig                        |   12 +
 arch/arm/plat-spear/Makefile                       |    5 +-
 arch/arm/plat-spear/restart.c                      |    5 +
 drivers/clk/spear/Makefile                         |    2 +
 drivers/clk/spear/spear1310_clock.c                | 1051 ++++++++++
 drivers/clk/spear/spear1340_clock.c                |  968 +++++++++
 drivers/pinctrl/spear/Kconfig                      |   10 +
 drivers/pinctrl/spear/Makefile                     |    2 +
 drivers/pinctrl/spear/pinctrl-spear.h              |  251 +++
 drivers/pinctrl/spear/pinctrl-spear1310.c          | 2198 ++++++++++++++++++++
 drivers/pinctrl/spear/pinctrl-spear1340.c          | 1989 ++++++++++++++++++
 drivers/pinctrl/spear/pinctrl-spear3xx.c           |  103 +-
 41 files changed, 8989 insertions(+), 126 deletions(-)
 create mode 100644 arch/arm/boot/dts/spear1310-evb.dts
 create mode 100644 arch/arm/boot/dts/spear1310.dtsi
 create mode 100644 arch/arm/boot/dts/spear1340-evb.dts
 create mode 100644 arch/arm/boot/dts/spear1340.dtsi
 create mode 100644 arch/arm/boot/dts/spear13xx.dtsi
 create mode 100644 arch/arm/configs/spear13xx_defconfig
 create mode 100644 arch/arm/mach-spear13xx/Kconfig
 create mode 100644 arch/arm/mach-spear13xx/Makefile
 create mode 100644 arch/arm/mach-spear13xx/Makefile.boot
 create mode 100644 arch/arm/mach-spear13xx/headsmp.S
 create mode 100644 arch/arm/mach-spear13xx/hotplug.c
 create mode 100644 arch/arm/mach-spear13xx/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-spear13xx/include/mach/dma.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/generic.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/gpio.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/hardware.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/irqs.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/spear.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/timex.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-spear13xx/platsmp.c
 create mode 100644 arch/arm/mach-spear13xx/spear1310.c
 create mode 100644 arch/arm/mach-spear13xx/spear1340.c
 create mode 100644 arch/arm/mach-spear13xx/spear13xx.c
 create mode 100644 drivers/clk/spear/spear1310_clock.c
 create mode 100644 drivers/clk/spear/spear1340_clock.c
 create mode 100644 drivers/pinctrl/spear/pinctrl-spear1310.c
 create mode 100644 drivers/pinctrl/spear/pinctrl-spear1340.c

-- 
1.7.9

[PATCH 1/9] SPEAr13xx: Add header files

[Viresh Kumar]

This patch adds basic header files for SPEAr13xx Machines.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 arch/arm/mach-spear13xx/include/mach/debug-macro.S |   14 ++
 arch/arm/mach-spear13xx/include/mach/dma.h         |  128 +++++++++++++++
 arch/arm/mach-spear13xx/include/mach/generic.h     |   49 ++++++
 arch/arm/mach-spear13xx/include/mach/gpio.h        |   19 ++
 arch/arm/mach-spear13xx/include/mach/hardware.h    |    1 +
 arch/arm/mach-spear13xx/include/mach/irqs.h        |   23 +++
 arch/arm/mach-spear13xx/include/mach/spear.h       |  173 ++++++++++++++++++++
 arch/arm/mach-spear13xx/include/mach/timex.h       |   19 ++
 arch/arm/mach-spear13xx/include/mach/uncompress.h  |   19 ++
 9 files changed, 445 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-spear13xx/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-spear13xx/include/mach/dma.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/generic.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/gpio.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/hardware.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/irqs.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/spear.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/timex.h
 create mode 100644 arch/arm/mach-spear13xx/include/mach/uncompress.h

diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..ea15646
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
new file mode 100644
index 0000000..383ab04
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/dma.h
+ *
+ * DMA information for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* request id of all the peripherals */
+enum dma_master_info {
+	/* Accessible from only one master */
+	DMA_MASTER_MCIF = 0,
+	DMA_MASTER_FSMC = 1,
+	/* Accessible from both 0 & 1 */
+	DMA_MASTER_MEMORY = 0,
+	DMA_MASTER_ADC = 0,
+	DMA_MASTER_UART0 = 0,
+	DMA_MASTER_SSP0 = 0,
+	DMA_MASTER_I2C0 = 0,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	/* Accessible from only one master */
+	SPEAR1310_DMA_MASTER_JPEG = 1,
+
+	/* Accessible from both 0 & 1 */
+	SPEAR1310_DMA_MASTER_I2S = 0,
+	SPEAR1310_DMA_MASTER_UART1 = 0,
+	SPEAR1310_DMA_MASTER_UART2 = 0,
+	SPEAR1310_DMA_MASTER_UART3 = 0,
+	SPEAR1310_DMA_MASTER_UART4 = 0,
+	SPEAR1310_DMA_MASTER_UART5 = 0,
+	SPEAR1310_DMA_MASTER_I2C1 = 0,
+	SPEAR1310_DMA_MASTER_I2C2 = 0,
+	SPEAR1310_DMA_MASTER_I2C3 = 0,
+	SPEAR1310_DMA_MASTER_I2C4 = 0,
+	SPEAR1310_DMA_MASTER_I2C5 = 0,
+	SPEAR1310_DMA_MASTER_I2C6 = 0,
+	SPEAR1310_DMA_MASTER_I2C7 = 0,
+	SPEAR1310_DMA_MASTER_SSP1 = 0,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	/* Accessible from only one master */
+	SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
+	SPEAR1340_DMA_MASTER_I2S_REC = 1,
+	SPEAR1340_DMA_MASTER_I2C1 = 1,
+	SPEAR1340_DMA_MASTER_UART1 = 1,
+
+	/* following are accessible from both master 0 & 1 */
+	SPEAR1340_DMA_MASTER_SPDIF = 0,
+	SPEAR1340_DMA_MASTER_CAM = 1,
+	SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
+	SPEAR1340_DMA_MASTER_MALI = 0,
+#endif
+};
+
+enum request_id {
+	DMA_REQ_ADC = 0,
+	DMA_REQ_SSP0_TX = 4,
+	DMA_REQ_SSP0_RX = 5,
+	DMA_REQ_UART0_TX = 6,
+	DMA_REQ_UART0_RX = 7,
+	DMA_REQ_I2C0_TX = 8,
+	DMA_REQ_I2C0_RX = 9,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	SPEAR1310_DMA_REQ_FROM_JPEG = 2,
+	SPEAR1310_DMA_REQ_TO_JPEG = 3,
+	SPEAR1310_DMA_REQ_I2S_TX = 10,
+	SPEAR1310_DMA_REQ_I2S_RX = 11,
+
+	SPEAR1310_DMA_REQ_I2C1_RX = 0,
+	SPEAR1310_DMA_REQ_I2C1_TX = 1,
+	SPEAR1310_DMA_REQ_I2C2_RX = 2,
+	SPEAR1310_DMA_REQ_I2C2_TX = 3,
+	SPEAR1310_DMA_REQ_I2C3_RX = 4,
+	SPEAR1310_DMA_REQ_I2C3_TX = 5,
+	SPEAR1310_DMA_REQ_I2C4_RX = 6,
+	SPEAR1310_DMA_REQ_I2C4_TX = 7,
+	SPEAR1310_DMA_REQ_I2C5_RX = 8,
+	SPEAR1310_DMA_REQ_I2C5_TX = 9,
+	SPEAR1310_DMA_REQ_I2C6_RX = 10,
+	SPEAR1310_DMA_REQ_I2C6_TX = 11,
+	SPEAR1310_DMA_REQ_UART1_RX = 12,
+	SPEAR1310_DMA_REQ_UART1_TX = 13,
+	SPEAR1310_DMA_REQ_UART2_RX = 14,
+	SPEAR1310_DMA_REQ_UART2_TX = 15,
+	SPEAR1310_DMA_REQ_UART5_RX = 16,
+	SPEAR1310_DMA_REQ_UART5_TX = 17,
+	SPEAR1310_DMA_REQ_SSP1_RX = 18,
+	SPEAR1310_DMA_REQ_SSP1_TX = 19,
+	SPEAR1310_DMA_REQ_I2C7_RX = 20,
+	SPEAR1310_DMA_REQ_I2C7_TX = 21,
+	SPEAR1310_DMA_REQ_UART3_RX = 28,
+	SPEAR1310_DMA_REQ_UART3_TX = 29,
+	SPEAR1310_DMA_REQ_UART4_RX = 30,
+	SPEAR1310_DMA_REQ_UART4_TX = 31,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	SPEAR1340_DMA_REQ_SPDIF_TX = 2,
+	SPEAR1340_DMA_REQ_SPDIF_RX = 3,
+	SPEAR1340_DMA_REQ_I2S_TX = 10,
+	SPEAR1340_DMA_REQ_I2S_RX = 11,
+	SPEAR1340_DMA_REQ_UART1_TX = 12,
+	SPEAR1340_DMA_REQ_UART1_RX = 13,
+	SPEAR1340_DMA_REQ_I2C1_TX = 14,
+	SPEAR1340_DMA_REQ_I2C1_RX = 15,
+	SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
+	SPEAR1340_DMA_REQ_CAM0_ODD = 1,
+	SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
+	SPEAR1340_DMA_REQ_CAM1_ODD = 3,
+	SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
+	SPEAR1340_DMA_REQ_CAM2_ODD = 5,
+	SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
+	SPEAR1340_DMA_REQ_CAM3_ODD = 7,
+#endif
+};
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
new file mode 100644
index 0000000..7a18579
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/generic.h
+ *
+ * spear13xx machine family generic header file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <asm/mach/time.h>
+
+/* Add spear13xx structure declarations here */
+extern struct sys_timer spear13xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct dw_dma_platform_data dmac_plat_data;
+extern struct dw_dma_slave cf_dma_priv;
+extern struct dw_dma_slave nand_read_dma_priv;
+extern struct dw_dma_slave nand_write_dma_priv;
+
+/* Add spear13xx family function declarations here */
+void __init spear_setup_timer(resource_size_t base, int irq);
+void __init spear13xx_map_io(void);
+void __init spear13xx_dt_init_irq(void);
+void __init spear13xx_l2x0_init(void);
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
+void spear_restart(char, const char *);
+void spear13xx_secondary_startup(void);
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void);
+#else
+static inline void spear1310_clk_init(void) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void);
+#else
+static inline void spear1340_clk_init(void) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
new file mode 100644
index 0000000..cd6f4f8
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/hardware.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
new file mode 100644
index 0000000..ddf5721
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_LOCALTIMER			29
+#define SPEAR13XX_IRQ_GPT0_TMR0		69
+#define SPEAR13XX_IRQ_GPT0_TMR1		70
+#define IRQ_GIC_END			160
+#define NR_IRQS				IRQ_GIC_END
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
new file mode 100644
index 0000000..189ab02
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/spear.h
+ *
+ * spear13xx Machine family specific definition
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR13XX_H
+#define __MACH_SPEAR13XX_H
+
+#include <asm/memory.h>
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				UL(0xFE800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			UL(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				UL(0xFD000000)
+#define ADC_BASE				UL(0xE0080000)
+#define SSP_BASE				UL(0xE0100000)
+#define I2C_BASE				UL(0xE0280000)
+#define KBD_BASE				UL(0xE0300000)
+#define GPT0_BASE				UL(0xE0380000)
+#define GPIO0_BASE				UL(0xE0600000)
+#define GPIO1_BASE				UL(0xE0680000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(UL(0xFD700000))
+#define SYSRAM1_BASE				UL(0xE0800000)
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			UL(0xFC000000)
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			UL(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+#define GIC_CPU_BASE				(A9SM_PERIP_BASE + 0x100)
+#define GLOBAL_TMR_BASE				(A9SM_PERIP_BASE + 0x200)
+#define LOCAL_TMR_BASE				(A9SM_PERIP_BASE + 0x600)
+#define GIC_DIST_BASE				(A9SM_PERIP_BASE + 0x1000)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define GETH_BASE				UL(0xE2000000)
+#define DMAC0_BASE				UL(0xEA800000)
+#define DMAC1_BASE				UL(0xEB000000)
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Devices present in SPEAr1310 */
+#ifdef CONFIG_MACH_SPEAR1310
+#define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+
+/* RAS Area Control Register */
+#define SPEAR1310_RAS_CTRL_REG0			(VA_SPEAR1310_RAS_BASE + 0x000)
+	#define SPEAR1310_GPT64_SYNC_ENB		0
+	#define SPEAR1310_GPT64_SYNC_ENB_MASK		1
+	#define SPEAR1310_GPT64_SYNC_ENB_SHIFT		31
+	#define SPEAR1310_SSP1_CS_SEL_CS0		0
+	#define SPEAR1310_SSP1_CS_SEL_CS1		1
+	#define SPEAR1310_SSP1_CS_SEL_MASK		3
+	#define SPEAR1310_SSP1_CS_SEL_SHIFT		30
+	#define SPEAR1310_SSP1_CS_VAL_MASK		1
+	#define SPEAR1310_SSP1_CS_VAL_SHIFT		28
+	#define SPEAR1310_SSP1_CS_CTL_HW		0
+	#define SPEAR1310_SSP1_CS_CTL_SW		1
+	#define SPEAR1310_SSP1_CS_CTL_MASK		1
+	#define SPEAR1310_SSP1_CS_CTL_SHIFT		27
+	#define SPEAR1310_SSP1_CLK_PCLK_VAL		0
+	#define SPEAR1310_SSP1_CLK_RAS_SYNT1_VAL	1
+	#define SPEAR1310_SSP1_CLK_RAS_PLCLK0_VAL	2
+	#define SPEAR1310_SSP1_CLK_MASK			3
+	#define SPEAR1310_SSP1_CLK_SHIFT		26
+	#define SPEAR1310_TDM_CLK_PLL3_VAL		0
+	#define SPEAR1310_TDM_CLK_RAS_SYNT1_VAL		1
+	#define SPEAR1310_TDM_CLK_MASK			1
+	#define SPEAR1310_TDM2_CLK_SHIFT		24
+	#define SPEAR1310_TDM1_CLK_SHIFT		23
+	#define SPEAR1310_I2C_CLK_PCLK_VAL		0
+	#define SPEAR1310_I2C_CLK_RAS_SYNT1_VAL		1
+	#define SPEAR1310_I2C_CLK_MASK			1
+	#define SPEAR1310_I2C7_CLK_SHIFT		22
+	#define SPEAR1310_I2C6_CLK_SHIFT		21
+	#define SPEAR1310_I2C5_CLK_SHIFT		20
+	#define SPEAR1310_I2C4_CLK_SHIFT		19
+	#define SPEAR1310_I2C3_CLK_SHIFT		18
+	#define SPEAR1310_I2C2_CLK_SHIFT		17
+	#define SPEAR1310_I2C1_CLK_SHIFT		16
+	#define SPEAR1310_GPT64_CLK_RAS_48M_VAL		0
+	#define SPEAR1310_GPT64_CLK_PCLK_VAL		1
+	#define SPEAR1310_GPT64_CLK_MASK		1
+	#define SPEAR1310_GPT64_CLK_SHIFT		15
+	#define SPEAR1310_UART_CLK_PCLK_VAL		0
+	#define SPEAR1310_UART_CLK_RAS_CLK_SYNT3	1
+	#define SPEAR1310_RAS_UART_CLK_MASK		1
+	#define SPEAR1310_UART5_CLK_SHIFT		14
+	#define SPEAR1310_UART4_CLK_SHIFT		13
+	#define SPEAR1310_UART3_CLK_SHIFT		12
+	#define SPEAR1310_UART2_CLK_SHIFT		11
+	#define SPEAR1310_UART1_CLK_SHIFT		10
+	#define SPEAR1310_PMX_GMAC_PCI_SEL_MASK		9 /* 0: GMAC, 1: PCI */
+	#define SPEAR1310_PCI_EXT_ARBITER_ENB		(1 << 8)
+	#define SPEAR1310_PCI_BUS_INT_ENB		7
+	#define SPEAR1310_PCI_INTR_STATUS		6
+	#define SPEAR1310_PCI_INTRX_ENB			5 /* 0: enb, 1: dsb */
+	#define SPEAR1310_PCI_PWR_STATE_CHG_ACK		4 /* 1: can change */
+	#define SPEAR1310_PCI_PME_VOLT_LEVEL		3 /* 0: Vaux, 1: Vcc */
+	#define SPEAR1310_PCI_INT_ARBITER_ENB		(1 << 2)
+	#define SPEAR1310_PCI_PME_STATUS		1
+	#define SPEAR1310_PCI_CLK_PLL3_VAL		0
+	#define SPEAR1310_PCI_CLK_RAS_SYNT2_VAL		1
+	#define SPEAR1310_PCI_CLK_MASK			1
+	#define SPEAR1310_PCI_CLK_SHIFT			0
+
+#define SPEAR1310_RAS_CTRL_REG1			(VA_SPEAR1310_RAS_BASE + 0x004)
+	#define SPEAR1310_RAS_TX50M_VAL			0x0	/* Only RMII */
+	#define SPEAR1310_RAS_TX125M_PAD_VAL		0x1	/* Only SMII */
+	#define SPEAR1310_RAS_PLL2_VAL			0x2
+	#define SPEAR1310_RAS_SYNTH0_VAL		0x3
+	#define SPEAR1310_PHY_CLK_MASK			0x3
+	#define SPEAR1310_RMII_PHY_CLK_SHIFT		0
+	#define SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT	2
+
+#define SPEAR1310_RAS_SW_CLK_CTRL		(VA_SPEAR1310_RAS_BASE + 0x0148)
+	#define SPEAR1310_CAN1_CLK_ENB			25
+	#define SPEAR1310_CAN0_CLK_ENB			24
+	#define SPEAR1310_GPT64_CLK_ENB			23
+	#define SPEAR1310_SSP1_CLK_ENB			22
+	#define SPEAR1310_I2C7_CLK_ENB			21
+	#define SPEAR1310_I2C6_CLK_ENB			20
+	#define SPEAR1310_I2C5_CLK_ENB			19
+	#define SPEAR1310_I2C4_CLK_ENB			18
+	#define SPEAR1310_I2C3_CLK_ENB			17
+	#define SPEAR1310_I2C2_CLK_ENB			16
+	#define SPEAR1310_I2C1_CLK_ENB			15
+	#define SPEAR1310_UART5_CLK_ENB			14
+	#define SPEAR1310_UART4_CLK_ENB			13
+	#define SPEAR1310_UART3_CLK_ENB			12
+	#define SPEAR1310_UART2_CLK_ENB			11
+	#define SPEAR1310_UART1_CLK_ENB			10
+	#define SPEAR1310_RS485_1_CLK_ENB		9
+	#define SPEAR1310_RS485_0_CLK_ENB		8
+	#define SPEAR1310_TDM2_CLK_ENB			7
+	#define SPEAR1310_TDM1_CLK_ENB			6
+	#define SPEAR1310_PCI_CLK_ENB			5
+	#define SPEAR1310_GMII_CLK_ENB			4
+	#define SPEAR1310_MII2_CLK_ENB			3
+	#define SPEAR1310_MII1_CLK_ENB			2
+	#define SPEAR1310_MII0_CLK_ENB			1
+	#define SPEAR1310_ESRAM_CLK_ENB			0
+
+#endif /* CONFIG_MACH_SPEAR1310 */
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
+
+#endif /* __MACH_SPEAR13XX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
new file mode 100644
index 0000000..e69de29
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
new file mode 100644
index 0000000..e69de29
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
new file mode 100644
index 0000000..31af3e8
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
new file mode 100644
index 0000000..c784089
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */
-- 
1.7.9

[PATCH 1/9] SPEAr13xx: Add header files

[Arnd Bergmann]

On Friday 20 April 2012, Viresh Kumar wrote:
> diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
> new file mode 100644
> index 0000000..383ab04
> --- /dev/null
> +++ b/arch/arm/mach-spear13xx/include/mach/dma.h
> @@ -0,0 +1,128 @@

> +#ifndef __MACH_DMA_H
> +#define __MACH_DMA_H
> +
> +/* request id of all the peripherals */
> +enum dma_master_info {
> +	/* Accessible from only one master */
> +	DMA_MASTER_MCIF = 0,
> +	DMA_MASTER_FSMC = 1,
> +	/* Accessible from both 0 & 1 */
> +	DMA_MASTER_MEMORY = 0,
> +	DMA_MASTER_ADC = 0,
> +	DMA_MASTER_UART0 = 0,
> +	DMA_MASTER_SSP0 = 0,
> +	DMA_MASTER_I2C0 = 0,

Ideally we wouldn't have this file and put all the data into
the device tree of course but we're still lacking bindings for
that, so it's still ok for v3.5.

> diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
> new file mode 100644
> index 0000000..ddf5721
> --- /dev/null
> +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
> @@ -0,0 +1,23 @@
> +
> +#ifndef __MACH_IRQS_H
> +#define __MACH_IRQS_H
> +
> +#define IRQ_LOCALTIMER			29

I think we can now probe localtimer from devicetree so you should
not need this one any more.

> +#define SPEAR13XX_IRQ_GPT0_TMR0		69
> +#define SPEAR13XX_IRQ_GPT0_TMR1		70

I'd also prefer if you could add bindings for GPT and probe
these interrupts and the GPT address from the devicetree
for the three spear platforms, that would make the code much
nicer in this area.

> +#define PERIP_GRP2_BASE				UL(0xB3000000)
> +#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
> +#define MCIF_SDHCI_BASE				UL(0xB3000000)
> +#define SYSRAM0_BASE				UL(0xB3800000)
> +#define VA_SYSRAM0_BASE				UL(0xFE800000)
> +#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
> +
> +#define PERIP_GRP1_BASE				UL(0xE0000000)
> +#define VA_PERIP_GRP1_BASE			UL(0xFD000000)
> +#define UART_BASE				UL(0xE0000000)
> +#define VA_UART_BASE				UL(0xFD000000)
> +#define ADC_BASE				UL(0xE0080000)
> +#define SSP_BASE				UL(0xE0100000)
> +#define I2C_BASE				UL(0xE0280000)
> +#define KBD_BASE				UL(0xE0300000)
> +#define GPT0_BASE				UL(0xE0380000)
> +#define GPIO0_BASE				UL(0xE0600000)
> +#define GPIO1_BASE				UL(0xE0680000)
> +#define MISC_BASE				UL(0xE0700000)
> +#define VA_MISC_BASE				IOMEM(UL(0xFD700000))
> +#define SYSRAM1_BASE				UL(0xE0800000)
> +
> +#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
> +#define VA_A9SM_AND_MPMC_BASE			UL(0xFC000000)
> +
> +/* A9SM peripheral offsets */
> +#define A9SM_PERIP_BASE				UL(0xEC800000)
> +#define VA_A9SM_PERIP_BASE			UL(0xFC800000)
> +#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
> +#define GIC_CPU_BASE				(A9SM_PERIP_BASE + 0x100)
> +#define GLOBAL_TMR_BASE				(A9SM_PERIP_BASE + 0x200)
> +#define LOCAL_TMR_BASE				(A9SM_PERIP_BASE + 0x600)
> +#define GIC_DIST_BASE				(A9SM_PERIP_BASE + 0x1000)
> +
> +#define L2CC_BASE				UL(0xED000000)
> +#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
> +
> +/* others */
> +#define GETH_BASE				UL(0xE2000000)
> +#define DMAC0_BASE				UL(0xEA800000)
> +#define DMAC1_BASE				UL(0xEB000000)
> +#define MCIF_CF_BASE				UL(0xB2800000)
> +
> +/* Devices present in SPEAr1310 */
> +#ifdef CONFIG_MACH_SPEAR1310
> +#define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
> +#define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
> +#define SPEAR1310_RAS_BASE			UL(0xD8400000)
> +#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))

Can you go through this list one more time and check which ones are
still needed here? I think most of them can just get removed.

> +/* RAS Area Control Register */
> +#define SPEAR1310_RAS_CTRL_REG0			(VA_SPEAR1310_RAS_BASE + 0x000)
> +	#define SPEAR1310_GPT64_SYNC_ENB		0
> +	#define SPEAR1310_GPT64_SYNC_ENB_MASK		1
> +	#define SPEAR1310_GPT64_SYNC_ENB_SHIFT		31
> +	#define SPEAR1310_SSP1_CS_SEL_CS0		0
> +	#define SPEAR1310_SSP1_CS_SEL_CS1		1
> +	#define SPEAR1310_SSP1_CS_SEL_MASK		3
> +	#define SPEAR1310_SSP1_CS_SEL_SHIFT		30
> +	#define SPEAR1310_SSP1_CS_VAL_MASK		1
> +	#define SPEAR1310_SSP1_CS_VAL_SHIFT		28
> +	#define SPEAR1310_SSP1_CS_CTL_HW		0
> +	#define SPEAR1310_SSP1_CS_CTL_SW		1

Why are the RAS control registers in a global header? It looks like you
only use them from the clock driver, so they can be moved into a local
header file there.

	Arnd

[PATCH 1/9] SPEAr13xx: Add header files

[viresh kumar]

On 4/20/12, Arnd Bergmann <arnd@arndb.de> wrote:
> On Friday 20 April 2012, Viresh Kumar wrote:
>> diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h
>> b/arch/arm/mach-spear13xx/include/mach/irqs.h
>> new file mode 100644
>> index 0000000..ddf5721
>> --- /dev/null
>> +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
>> @@ -0,0 +1,23 @@
>> +
>> +#ifndef __MACH_IRQS_H
>> +#define __MACH_IRQS_H
>> +
>> +#define IRQ_LOCALTIMER			29
>
> I think we can now probe localtimer from devicetree so you should
> not need this one any more.

Done in V2.

>> +#define SPEAR13XX_IRQ_GPT0_TMR0		69
>> +#define SPEAR13XX_IRQ_GPT0_TMR1		70
>
> I'd also prefer if you could add bindings for GPT and probe
> these interrupts and the GPT address from the devicetree
> for the three spear platforms, that would make the code much
> nicer in this area.

Done in V2.

>> +#define PERIP_GRP2_BASE				UL(0xB3000000)
>> +#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
>> +#define MCIF_SDHCI_BASE				UL(0xB3000000)
>> +#define SYSRAM0_BASE				UL(0xB3800000)

> Can you go through this list one more time and check which ones are
> still needed here? I think most of them can just get removed.

Yes. Removed whatever is not used currently.

>> +/* RAS Area Control Register */
>> +#define SPEAR1310_RAS_CTRL_REG0			(VA_SPEAR1310_RAS_BASE + 0x000)
>> +	#define SPEAR1310_GPT64_SYNC_ENB		0
>> +	#define SPEAR1310_GPT64_SYNC_ENB_MASK		1
>> +	#define SPEAR1310_GPT64_SYNC_ENB_SHIFT		31
>> +	#define SPEAR1310_SSP1_CS_SEL_CS0		0
>> +	#define SPEAR1310_SSP1_CS_SEL_CS1		1
>> +	#define SPEAR1310_SSP1_CS_SEL_MASK		3
>> +	#define SPEAR1310_SSP1_CS_SEL_SHIFT		30
>> +	#define SPEAR1310_SSP1_CS_VAL_MASK		1
>> +	#define SPEAR1310_SSP1_CS_VAL_SHIFT		28
>> +	#define SPEAR1310_SSP1_CS_CTL_HW		0
>> +	#define SPEAR1310_SSP1_CS_CTL_SW		1
>
> Why are the RAS control registers in a global header? It looks like you
> only use them from the clock driver, so they can be moved into a local
> header file there.

Actually registers serves many different features. Clock, software controlled
chip selects for spi, etc. So really can't move to clock drivers.

I didn't wanted half part of a register in one file and other half in other.
So kept them here, so that these are accessible from all users.

--
viresh

[PATCH 1/9] SPEAr13xx: Add header files

[Arnd Bergmann]

On Saturday 21 April 2012, viresh kumar wrote:
> On 4/20/12, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Friday 20 April 2012, Viresh Kumar wrote:
> >> +/* RAS Area Control Register */
> >> +#define SPEAR1310_RAS_CTRL_REG0			(VA_SPEAR1310_RAS_BASE + 0x000)
> >> +	#define SPEAR1310_GPT64_SYNC_ENB		0
> >> +	#define SPEAR1310_GPT64_SYNC_ENB_MASK		1
> >> +	#define SPEAR1310_GPT64_SYNC_ENB_SHIFT		31
> >> +	#define SPEAR1310_SSP1_CS_SEL_CS0		0
> >> +	#define SPEAR1310_SSP1_CS_SEL_CS1		1
> >> +	#define SPEAR1310_SSP1_CS_SEL_MASK		3
> >> +	#define SPEAR1310_SSP1_CS_SEL_SHIFT		30
> >> +	#define SPEAR1310_SSP1_CS_VAL_MASK		1
> >> +	#define SPEAR1310_SSP1_CS_VAL_SHIFT		28
> >> +	#define SPEAR1310_SSP1_CS_CTL_HW		0
> >> +	#define SPEAR1310_SSP1_CS_CTL_SW		1
> >
> > Why are the RAS control registers in a global header? It looks like you
> > only use them from the clock driver, so they can be moved into a local
> > header file there.
> 
> Actually registers serves many different features. Clock, software controlled
> chip selects for spi, etc. So really can't move to clock drivers.
> 
> I didn't wanted half part of a register in one file and other half in other.
> So kept them here, so that these are accessible from all users.

It's still really ugly to have that in a global header file, including the
hardcoded register addresses.

What I'd suggest you do instead here is export a function to access the
registers from device drivers and add a new header file that contains
only this interface, the register offsets and the register definitions.
Then you can use proper of_iomap calls to get the area from the device
tree in the machine init code and it will be clear which drivers use the
interface because they have to explicitly include that header.

	Arnd

[PATCH 1/9] SPEAr13xx: Add header files

[viresh kumar]

On Sun, Apr 22, 2012 at 12:07 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> It's still really ugly to have that in a global header file, including the
> hardcoded register addresses.

I will check if i can move this to clock.c for now, to move things quicker. :)

--
viresh

[PATCH 1/9] SPEAr13xx: Add header files

[viresh kumar]

On 4/23/12, viresh kumar <viresh.linux@gmail.com> wrote:
> On Sun, Apr 22, 2012 at 12:07 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>> It's still really ugly to have that in a global header file, including
>> the
>> hardcoded register addresses.
>
> I will check if i can move this to clock.c for now, to move things quicker.
> :)

Will squash following with this patch in my pull request, if i don't need
to send V3:

From: Viresh Kumar <viresh.kumar@st.com>
Date: Mon, 23 Apr 2012 17:35:36 +0530
Subject: [PATCH 1/2] fixup! SPEAr13xx: Add header files

Remove 1310 specific register declarations from spear.h

---
 arch/arm/mach-spear13xx/include/mach/spear.h |   99 --------------------------
 1 files changed, 0 insertions(+), 99 deletions(-)

diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h
b/arch/arm/mach-spear13xx/include/mach/spear.h
index 57fb960..30c57ef 100644
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -53,105 +53,6 @@
 #define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
 #define SPEAR1310_RAS_BASE			UL(0xD8400000)
 #define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
-
-/* RAS Area Control Register */
-#define SPEAR1310_RAS_CTRL_REG0			(VA_SPEAR1310_RAS_BASE + 0x000)
-	#define SPEAR1310_GPT64_SYNC_ENB		0
-	#define SPEAR1310_GPT64_SYNC_ENB_MASK		1
-	#define SPEAR1310_GPT64_SYNC_ENB_SHIFT		31
-	#define SPEAR1310_SSP1_CS_SEL_CS0		0
-	#define SPEAR1310_SSP1_CS_SEL_CS1		1
-	#define SPEAR1310_SSP1_CS_SEL_MASK		3
-	#define SPEAR1310_SSP1_CS_SEL_SHIFT		30
-	#define SPEAR1310_SSP1_CS_VAL_MASK		1
-	#define SPEAR1310_SSP1_CS_VAL_SHIFT		28
-	#define SPEAR1310_SSP1_CS_CTL_HW		0
-	#define SPEAR1310_SSP1_CS_CTL_SW		1
-	#define SPEAR1310_SSP1_CS_CTL_MASK		1
-	#define SPEAR1310_SSP1_CS_CTL_SHIFT		27
-	#define SPEAR1310_SSP1_CLK_PCLK_VAL		0
-	#define SPEAR1310_SSP1_CLK_RAS_SYNT1_VAL	1
-	#define SPEAR1310_SSP1_CLK_RAS_PLCLK0_VAL	2
-	#define SPEAR1310_SSP1_CLK_MASK			3
-	#define SPEAR1310_SSP1_CLK_SHIFT		26
-	#define SPEAR1310_TDM_CLK_PLL3_VAL		0
-	#define SPEAR1310_TDM_CLK_RAS_SYNT1_VAL		1
-	#define SPEAR1310_TDM_CLK_MASK			1
-	#define SPEAR1310_TDM2_CLK_SHIFT		24
-	#define SPEAR1310_TDM1_CLK_SHIFT		23
-	#define SPEAR1310_I2C_CLK_PCLK_VAL		0
-	#define SPEAR1310_I2C_CLK_RAS_SYNT1_VAL		1
-	#define SPEAR1310_I2C_CLK_MASK			1
-	#define SPEAR1310_I2C7_CLK_SHIFT		22
-	#define SPEAR1310_I2C6_CLK_SHIFT		21
-	#define SPEAR1310_I2C5_CLK_SHIFT		20
-	#define SPEAR1310_I2C4_CLK_SHIFT		19
-	#define SPEAR1310_I2C3_CLK_SHIFT		18
-	#define SPEAR1310_I2C2_CLK_SHIFT		17
-	#define SPEAR1310_I2C1_CLK_SHIFT		16
-	#define SPEAR1310_GPT64_CLK_RAS_48M_VAL		0
-	#define SPEAR1310_GPT64_CLK_PCLK_VAL		1
-	#define SPEAR1310_GPT64_CLK_MASK		1
-	#define SPEAR1310_GPT64_CLK_SHIFT		15
-	#define SPEAR1310_UART_CLK_PCLK_VAL		0
-	#define SPEAR1310_UART_CLK_RAS_CLK_SYNT3	1
-	#define SPEAR1310_RAS_UART_CLK_MASK		1
-	#define SPEAR1310_UART5_CLK_SHIFT		14
-	#define SPEAR1310_UART4_CLK_SHIFT		13
-	#define SPEAR1310_UART3_CLK_SHIFT		12
-	#define SPEAR1310_UART2_CLK_SHIFT		11
-	#define SPEAR1310_UART1_CLK_SHIFT		10
-	#define SPEAR1310_PMX_GMAC_PCI_SEL_MASK		9 /* 0: GMAC, 1: PCI */
-	#define SPEAR1310_PCI_EXT_ARBITER_ENB		(1 << 8)
-	#define SPEAR1310_PCI_BUS_INT_ENB		7
-	#define SPEAR1310_PCI_INTR_STATUS		6
-	#define SPEAR1310_PCI_INTRX_ENB			5 /* 0: enb, 1: dsb */
-	#define SPEAR1310_PCI_PWR_STATE_CHG_ACK		4 /* 1: can change */
-	#define SPEAR1310_PCI_PME_VOLT_LEVEL		3 /* 0: Vaux, 1: Vcc */
-	#define SPEAR1310_PCI_INT_ARBITER_ENB		(1 << 2)
-	#define SPEAR1310_PCI_PME_STATUS		1
-	#define SPEAR1310_PCI_CLK_PLL3_VAL		0
-	#define SPEAR1310_PCI_CLK_RAS_SYNT2_VAL		1
-	#define SPEAR1310_PCI_CLK_MASK			1
-	#define SPEAR1310_PCI_CLK_SHIFT			0
-
-#define SPEAR1310_RAS_CTRL_REG1			(VA_SPEAR1310_RAS_BASE + 0x004)
-	#define SPEAR1310_RAS_TX50M_VAL			0x0	/* Only RMII */
-	#define SPEAR1310_RAS_TX125M_PAD_VAL		0x1	/* Only SMII */
-	#define SPEAR1310_RAS_PLL2_VAL			0x2
-	#define SPEAR1310_RAS_SYNTH0_VAL		0x3
-	#define SPEAR1310_PHY_CLK_MASK			0x3
-	#define SPEAR1310_RMII_PHY_CLK_SHIFT		0
-	#define SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT	2
-
-#define SPEAR1310_RAS_SW_CLK_CTRL		(VA_SPEAR1310_RAS_BASE + 0x0148)
-	#define SPEAR1310_CAN1_CLK_ENB			25
-	#define SPEAR1310_CAN0_CLK_ENB			24
-	#define SPEAR1310_GPT64_CLK_ENB			23
-	#define SPEAR1310_SSP1_CLK_ENB			22
-	#define SPEAR1310_I2C7_CLK_ENB			21
-	#define SPEAR1310_I2C6_CLK_ENB			20
-	#define SPEAR1310_I2C5_CLK_ENB			19
-	#define SPEAR1310_I2C4_CLK_ENB			18
-	#define SPEAR1310_I2C3_CLK_ENB			17
-	#define SPEAR1310_I2C2_CLK_ENB			16
-	#define SPEAR1310_I2C1_CLK_ENB			15
-	#define SPEAR1310_UART5_CLK_ENB			14
-	#define SPEAR1310_UART4_CLK_ENB			13
-	#define SPEAR1310_UART3_CLK_ENB			12
-	#define SPEAR1310_UART2_CLK_ENB			11
-	#define SPEAR1310_UART1_CLK_ENB			10
-	#define SPEAR1310_RS485_1_CLK_ENB		9
-	#define SPEAR1310_RS485_0_CLK_ENB		8
-	#define SPEAR1310_TDM2_CLK_ENB			7
-	#define SPEAR1310_TDM1_CLK_ENB			6
-	#define SPEAR1310_PCI_CLK_ENB			5
-	#define SPEAR1310_GMII_CLK_ENB			4
-	#define SPEAR1310_MII2_CLK_ENB			3
-	#define SPEAR1310_MII1_CLK_ENB			2
-	#define SPEAR1310_MII0_CLK_ENB			1
-	#define SPEAR1310_ESRAM_CLK_ENB			0
-
 #endif /* CONFIG_MACH_SPEAR1310 */

[PATCH 2/9] SPEAr13xx: Add source files

[Viresh Kumar]

This patch adds source files for SPEAr13xx Machines.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
---
 arch/arm/mach-spear13xx/Kconfig       |   18 +++
 arch/arm/mach-spear13xx/Makefile      |   10 ++
 arch/arm/mach-spear13xx/Makefile.boot |    6 +
 arch/arm/mach-spear13xx/headsmp.S     |   47 ++++++++
 arch/arm/mach-spear13xx/hotplug.c     |  119 +++++++++++++++++++
 arch/arm/mach-spear13xx/platsmp.c     |  127 ++++++++++++++++++++
 arch/arm/mach-spear13xx/spear1310.c   |   88 ++++++++++++++
 arch/arm/mach-spear13xx/spear1340.c   |  192 ++++++++++++++++++++++++++++++
 arch/arm/mach-spear13xx/spear13xx.c   |  210 +++++++++++++++++++++++++++++++++
 arch/arm/plat-spear/restart.c         |    5 +
 10 files changed, 822 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-spear13xx/Kconfig
 create mode 100644 arch/arm/mach-spear13xx/Makefile
 create mode 100644 arch/arm/mach-spear13xx/Makefile.boot
 create mode 100644 arch/arm/mach-spear13xx/headsmp.S
 create mode 100644 arch/arm/mach-spear13xx/hotplug.c
 create mode 100644 arch/arm/mach-spear13xx/platsmp.c
 create mode 100644 arch/arm/mach-spear13xx/spear1310.c
 create mode 100644 arch/arm/mach-spear13xx/spear1340.c
 create mode 100644 arch/arm/mach-spear13xx/spear13xx.c

diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig
new file mode 100644
index 0000000..138e891
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Kconfig
@@ -0,0 +1,18 @@
+#
+# SPEAr13XX Machine configuration file
+#
+
+if ARCH_SPEAR13XX
+
+menu "SPEAr13xx Implementations"
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+endmenu
+endif #ARCH_SPEAR13XX
diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile
new file mode 100644
index 0000000..3435ea7
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for SPEAr13XX machine series
+#
+
+obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
new file mode 100644
index 0000000..403efd7
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile.boot
@@ -0,0 +1,6 @@
+zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR1310)	+= spear1310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR1340)	+= spear1340-evb.dtb
diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear13xx/headsmp.S
new file mode 100644
index 0000000..ed85473
--- /dev/null
+++ b/arch/arm/mach-spear13xx/headsmp.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/* re-enable coherency */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(1 << 6) | (1 << 0)
+	mcr	p15, 0, r0, c1, c0, 1
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	pen_release
+ENDPROC(spear13xx_secondary_startup)
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
new file mode 100644
index 0000000..5c6867b
--- /dev/null
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -0,0 +1,119 @@
+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	dsb\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	: "=&r" (v)
+	: "r" (0), "Ir" (CR_C)
+	: "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile("mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	: "=&r" (v)
+	: "Ir" (CR_C)
+	: "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	for (;;) {
+		wfi();
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __cpuinit platform_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
new file mode 100644
index 0000000..f5d07f2
--- /dev/null
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+extern void spear13xx_secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+	outer_flush_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
new file mode 100644
index 0000000..fefd15b
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1310_SSP1_BASE			UL(0x5D400000)
+#define SPEAR1310_SATA0_BASE			UL(0xB1000000)
+#define SPEAR1310_SATA1_BASE			UL(0xB1800000)
+#define SPEAR1310_SATA2_BASE			UL(0xB4000000)
+
+/* ssp device registration */
+static struct pl022_ssp_controller ssp1_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 3,
+};
+
+/* Add SPEAr1310 auxdata to pass platform data */
+static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
+	{}
+};
+
+static void __init spear1310_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1310_auxdata_lookup, NULL);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+	"st,spear1310",
+	"st,spear1310-evb",
+	NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD8000000		0xFA000000
+ */
+struct map_desc spear1310_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR1310_RAS_GRP1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init spear1310_map_io(void)
+{
+	iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+	spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+	.map_io		=	spear1310_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
new file mode 100644
index 0000000..ee38cbc
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-spear13xx/spear1340.c
+ *
+ * SPEAr1340 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1340: " fmt
+
+#include <linux/ahci_platform.h>
+#include <linux/amba/serial.h>
+#include <linux/delay.h>
+#include <linux/dw_dmac.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1340_SATA_BASE			UL(0xB1000000)
+#define SPEAR1340_UART1_BASE			UL(0xB4100000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG			(VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR			(VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST			(VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST			(VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST			(VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG			(VA_MISC_BASE + 0x424)
+	/* PCIE CFG MASks */
+	#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT	(1 << 11)
+	#define SPEAR1340_PCIE_CFG_POWERUP_RESET	(1 << 10)
+	#define SPEAR1340_PCIE_CFG_CORE_CLK_EN		(1 << 9)
+	#define SPEAR1340_PCIE_CFG_AUX_CLK_EN		(1 << 8)
+	#define SPEAR1340_SATA_CFG_TX_CLK_EN		(1 << 4)
+	#define SPEAR1340_SATA_CFG_RX_CLK_EN		(1 << 3)
+	#define SPEAR1340_SATA_CFG_POWERUP_RESET	(1 << 2)
+	#define SPEAR1340_SATA_CFG_PM_CLK_EN		(1 << 1)
+	#define SPEAR1340_PCIE_SATA_SEL_PCIE		(0)
+	#define SPEAR1340_PCIE_SATA_SEL_SATA		(1)
+	#define SPEAR1340_SATA_PCIE_CFG_MASK		0xF1F
+	#define SPEAR1340_PCIE_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_PCIE | \
+			SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+			SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+			SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+			SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+	#define SPEAR1340_SATA_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_SATA | \
+			SPEAR1340_SATA_CFG_PM_CLK_EN | \
+			SPEAR1340_SATA_CFG_POWERUP_RESET | \
+			SPEAR1340_SATA_CFG_RX_CLK_EN | \
+			SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG		(VA_MISC_BASE + 0x428)
+	#define SPEAR1340_MIPHY_OSC_BYPASS_EXT		(1 << 31)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV2		(1 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV4		(2 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV8		(3 << 27)
+	#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x)	(x << 0)
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+			(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static struct dw_dma_slave uart1_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = SPEAR1340_DMA_MASTER_UART1,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
+		.cfg_lo = 0,
+		.src_master = SPEAR1340_DMA_MASTER_UART1,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+static struct amba_pl011_data uart1_data = {
+	.dma_filter = dw_dma_filter,
+	.dma_tx_param = &uart1_dma_param[0],
+	.dma_rx_param = &uart1_dma_param[1],
+};
+
+/* SATA device registration */
+static int sata_miphy_init(struct device *dev, void __iomem *addr)
+{
+	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+			SPEAR1340_PCIE_MIPHY_CFG);
+	/* Switch on sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+	/* Disable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+
+	return 0;
+}
+
+void sata_miphy_exit(struct device *dev)
+{
+	writel(0, SPEAR1340_PCIE_SATA_CFG);
+	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+	/* Enable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+	/* Switch off sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+}
+
+int sata_suspend(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_FREEZE)
+		return 0;
+
+	sata_miphy_exit(dev);
+
+	return 0;
+}
+
+int sata_resume(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_THAW)
+		return 0;
+
+	return sata_miphy_init(dev, NULL);
+}
+
+static struct ahci_platform_data sata_pdata = {
+	.init = sata_miphy_init,
+	.exit = sata_miphy_exit,
+	.suspend = sata_suspend,
+	.resume = sata_resume,
+};
+
+/* Add SPEAr1340 auxdata to pass platform data */
+static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
+			&sata_pdata),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
+	{}
+};
+
+static void __init spear1340_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1340_auxdata_lookup, NULL);
+}
+
+static const char * const spear1340_dt_board_compat[] = {
+	"st,spear1340",
+	"st,spear1340-evb",
+	NULL,
+};
+
+DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+	.map_io		=	spear13xx_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1340_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1340_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
new file mode 100644
index 0000000..3fccc0c
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -0,0 +1,210 @@
+/*
+ * arch/arm/mach-spear13xx/spear13xx.c
+ *
+ * SPEAr13XX machines common source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr13xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/clk.h>
+#include <linux/dw_dmac.h>
+#include <linux/err.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/smp_twd.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* common dw_dma filter routine to be used by peripherals */
+bool dw_dma_filter(struct dma_chan *chan, void *slave)
+{
+	struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
+
+	if (chan->device->dev == dws->dma_dev) {
+		chan->private = slave;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/* ssp device registration */
+static struct dw_dma_slave ssp_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = DMA_MASTER_SSP0,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_SSP0,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = dw_dma_filter,
+	.dma_rx_param = &ssp_dma_param[1],
+	.dma_tx_param = &ssp_dma_param[0],
+	.num_chipselect = 3,
+};
+
+/* CF device registration */
+struct dw_dma_slave cf_dma_priv = {
+	.cfg_hi = 0,
+	.cfg_lo = 0,
+	.src_master = 0,
+	.dst_master = 0,
+};
+
+/* dmac device registeration */
+struct dw_dma_platform_data dmac_plat_data = {
+	.nr_channels = 8,
+	.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
+	.chan_priority = CHAN_PRIORITY_DESCENDING,
+};
+
+void __init spear13xx_l2x0_init(void)
+{
+	/*
+	 * 512KB (64KB/way), 8-way associativity, parity supported
+	 *
+	 * FIXME: 9th bit, of Auxillary Controller register must be set
+	 * for some spear13xx devices for stable L2 operation.
+	 *
+	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
+	 * write alloc and 'Full line of zero' options
+	 *
+	 */
+
+	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+
+	/*
+	 * Program following latencies in order to make
+	 * SPEAr1340 work at 600 MHz
+	 */
+	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+}
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xB3000000		0xFE000000
+ * 0xE0000000		0xFD000000
+ * 0xEC000000		0xFC000000
+ * 0xED000000		0xFB000000
+ */
+struct map_desc spear13xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_PERIP_GRP2_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_PERIP_GRP1_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_A9SM_AND_MPMC_BASE,
+		.pfn		= __phys_to_pfn(A9SM_AND_MPMC_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_L2CC_BASE,
+		.pfn		= __phys_to_pfn(L2CC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear13xx_map_io(void)
+{
+	iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
+}
+
+static void __init spear13xx_clk_init(void)
+{
+	if (of_machine_is_compatible("st,spear1310"))
+		spear1310_clk_init();
+	else if (of_machine_is_compatible("st,spear1340"))
+		spear1340_clk_init();
+	else
+		pr_err("%s: Unknown machine\n", __func__);
+}
+
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, LOCAL_TMR_BASE, IRQ_LOCALTIMER);
+
+static void __init spear_twd_init(void)
+{
+	int err = twd_local_timer_register(&twd_local_timer);
+	if (err)
+		pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define spear_twd_init()	do {} while (0)
+#endif
+
+static void __init spear13xx_timer_init(void)
+{
+	char pclk_name[] = "osc_24m_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear13xx_clk_init();
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
+				pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_timer(GPT0_BASE, SPEAR13XX_IRQ_GPT0_TMR0);
+	spear_twd_init();
+}
+
+struct sys_timer spear13xx_timer = {
+	.init = spear13xx_timer_init,
+};
+
+static const struct of_device_id gic_of_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ /* Sentinel */ }
+};
+
+void __init spear13xx_dt_init_irq(void)
+{
+	of_irq_init(gic_of_match);
+}
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 4471a23..ea0a613 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -16,6 +16,7 @@
 #include <mach/spear.h>
 #include <mach/generic.h>
 
+#define SPEAR13XX_SYS_SW_RES			(VA_MISC_BASE + 0x204)
 void spear_restart(char mode, const char *cmd)
 {
 	if (mode == 's') {
@@ -23,6 +24,10 @@ void spear_restart(char mode, const char *cmd)
 		soft_restart(0);
 	} else {
 		/* hardware reset, Use on-chip reset capability */
+#ifdef CONFIG_ARCH_SPEAR13XX
+		writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
+#else
 		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+#endif
 	}
 }
-- 
1.7.9

[PATCH 2/9] SPEAr13xx: Add source files

[Arnd Bergmann]

On Friday 20 April 2012, Viresh Kumar wrote:

> +static struct dw_dma_slave uart1_dma_param[] = {
> +	{
> +		/* Tx */
> +		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
> +		.cfg_lo = 0,
> +		.src_master = DMA_MASTER_MEMORY,
> +		.dst_master = SPEAR1340_DMA_MASTER_UART1,
> +	}, {
> +		/* Rx */
> +		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
> +		.cfg_lo = 0,
> +		.src_master = SPEAR1340_DMA_MASTER_UART1,
> +		.dst_master = DMA_MASTER_MEMORY,
> +	}
> +};
> +
> +static struct amba_pl011_data uart1_data = {
> +	.dma_filter = dw_dma_filter,
> +	.dma_tx_param = &uart1_dma_param[0],
> +	.dma_rx_param = &uart1_dma_param[1],
> +};

Again, I hope that we can remove this eventually when we have the DMA bindings,
but it's ok for now.

> +/* SATA device registration */
> +static int sata_miphy_init(struct device *dev, void __iomem *addr)
> +{
> +	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
> +	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
> +			SPEAR1340_PCIE_MIPHY_CFG);
> +	/* Switch on sata power domain */
> +	writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
> +	msleep(20);
> +	/* Disable PCIE SATA Controller reset */
> +	writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
> +			SPEAR1340_PERIP1_SW_RST);
> +	msleep(20);
> +
> +	return 0;
> +}
> +
> +void sata_miphy_exit(struct device *dev)
> +{
> +	writel(0, SPEAR1340_PCIE_SATA_CFG);
> +	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
> +
> +	/* Enable PCIE SATA Controller reset */
> +	writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
> +			SPEAR1340_PERIP1_SW_RST);
> +	msleep(20);
> +	/* Switch off sata power domain */
> +	writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
> +	msleep(20);
> +}
> +
> +int sata_suspend(struct device *dev)
> +{
> +	if (dev->power.power_state.event == PM_EVENT_FREEZE)
> +		return 0;
> +
> +	sata_miphy_exit(dev);
> +
> +	return 0;
> +}

I'd like to see this done differently, with a ahci_spear driver derived from
ahci_platform that provides these functions in a modular driver that registers
to a spear specific identifier string and is able to do the platform specific
based on information it can find in the device tree. That would however require
changes to the existing ahci_platform code and I'd first like to hear what
Jeff and others have to say about this.

	Arnd

[PATCH 2/9] SPEAr13xx: Add source files

[viresh kumar]

On 4/20/12, Arnd Bergmann <arnd@arndb.de> wrote:
> On Friday 20 April 2012, Viresh Kumar wrote:
>
>> +static struct dw_dma_slave uart1_dma_param[] = {
>> +	{
> Again, I hope that we can remove this eventually when we have the DMA
> bindings, but it's ok for now.

Surely try do later, once those DT bindings are up.

>> +/* SATA device registration */
>> +static int sata_miphy_init(struct device *dev, void __iomem *addr)
>> +{
>> +	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
>> +	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
>> +			SPEAR1340_PCIE_MIPHY_CFG);
>> +	/* Switch on sata power domain */
>> +	writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
>> +	msleep(20);
>> +	/* Disable PCIE SATA Controller reset */
>> +	writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
>> +			SPEAR1340_PERIP1_SW_RST);
>> +	msleep(20);
>> +
>> +	return 0;
>> +}
>> +
>> +void sata_miphy_exit(struct device *dev)
>> +{
>> +	writel(0, SPEAR1340_PCIE_SATA_CFG);
>> +	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
>> +
>> +	/* Enable PCIE SATA Controller reset */
>> +	writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
>> +			SPEAR1340_PERIP1_SW_RST);
>> +	msleep(20);
>> +	/* Switch off sata power domain */
>> +	writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
>> +	msleep(20);
>> +}
>> +
>> +int sata_suspend(struct device *dev)
>> +{
>> +	if (dev->power.power_state.event == PM_EVENT_FREEZE)
>> +		return 0;
>> +
>> +	sata_miphy_exit(dev);
>> +
>> +	return 0;
>> +}
>
> I'd like to see this done differently, with a ahci_spear driver derived from
> ahci_platform that provides these functions in a modular driver that
> registers
> to a spear specific identifier string and is able to do the platform
> specific
> based on information it can find in the device tree. That would however
> require
> changes to the existing ahci_platform code and I'd first like to hear what
> Jeff and others have to say about this.

To get platform data for ahci with DT, we need to do as mentioned by you.
But for now maybe we can accept this approach. Once somebody fix ahci
DT support as you suggested, we could create such drivers.

--
viresh

[PATCH 2/9] SPEAr13xx: Add source files

[Arnd Bergmann]

On Saturday 21 April 2012, viresh kumar wrote:
> On 4/20/12, Arnd Bergmann <arnd@arndb.de> wrote:

> > I'd like to see this done differently, with a ahci_spear driver derived from
> > ahci_platform that provides these functions in a modular driver that
> > registers
> > to a spear specific identifier string and is able to do the platform
> > specific
> > based on information it can find in the device tree. That would however
> > require
> > changes to the existing ahci_platform code and I'd first like to hear what
> > Jeff and others have to say about this.
> 
> To get platform data for ahci with DT, we need to do as mentioned by you.
> But for now maybe we can accept this approach. Once somebody fix ahci
> DT support as you suggested, we could create such drivers.

Ok, fair enough. Right now we have only four platforms using this (davinci,
exynos, imx and now spear), but the code is still fairly well isolated.

	Arnd

[PATCH 3/9] SPEAr13xx: Add common clock framework support

[Viresh Kumar]

This patch adds SPEAr1310 and SPEAr1340's clock framework support. It is based
on earlier support for SPEAr3xx family.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Mike Turquette <mturquette@ti.com>
---
Mike,

This would be required to go through Arnd's tree. So would be great if i can
have your comments/Ack here.

 drivers/clk/spear/Makefile          |    2 +
 drivers/clk/spear/spear1310_clock.c | 1051 +++++++++++++++++++++++++++++++++++
 drivers/clk/spear/spear1340_clock.c |  968 ++++++++++++++++++++++++++++++++
 3 files changed, 2021 insertions(+), 0 deletions(-)
 create mode 100644 drivers/clk/spear/spear1310_clock.c
 create mode 100644 drivers/clk/spear/spear1340_clock.c

diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
index b499da6..6728271 100644
--- a/drivers/clk/spear/Makefile
+++ b/drivers/clk/spear/Makefile
@@ -6,3 +6,5 @@ obj-y	+= clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
 
 obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx_clock.o
 obj-$(CONFIG_ARCH_SPEAR6XX)	+= spear6xx_clock.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310_clock.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340_clock.o
diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
new file mode 100644
index 0000000..c813016
--- /dev/null
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -0,0 +1,1051 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310_clock.c
+ *
+ * SPEAr1310 machine clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include "clk.h"
+
+/* PLL related registers and bit values */
+#define SPEAR1310_PLL_CFG			(VA_MISC_BASE + 0x210)
+	/* PLL_CFG bit values */
+	#define SPEAR1310_CLCD_SYNT_CLK_MASK		1
+	#define SPEAR1310_CLCD_SYNT_CLK_SHIFT		31
+	#define SPEAR1310_RAS_SYNT2_3_CLK_MASK		2
+	#define SPEAR1310_RAS_SYNT2_3_CLK_SHIFT		29
+	#define SPEAR1310_RAS_SYNT_CLK_MASK		2
+	#define SPEAR1310_RAS_SYNT0_1_CLK_SHIFT		27
+	#define SPEAR1310_PLL_CLK_MASK			2
+	#define SPEAR1310_PLL3_CLK_SHIFT		24
+	#define SPEAR1310_PLL2_CLK_SHIFT		22
+	#define SPEAR1310_PLL1_CLK_SHIFT		20
+
+#define SPEAR1310_PLL1_CTR			(VA_MISC_BASE + 0x214)
+#define SPEAR1310_PLL1_FRQ			(VA_MISC_BASE + 0x218)
+#define SPEAR1310_PLL2_CTR			(VA_MISC_BASE + 0x220)
+#define SPEAR1310_PLL2_FRQ			(VA_MISC_BASE + 0x224)
+#define SPEAR1310_PLL3_CTR			(VA_MISC_BASE + 0x22C)
+#define SPEAR1310_PLL3_FRQ			(VA_MISC_BASE + 0x230)
+#define SPEAR1310_PLL4_CTR			(VA_MISC_BASE + 0x238)
+#define SPEAR1310_PLL4_FRQ			(VA_MISC_BASE + 0x23C)
+#define SPEAR1310_PERIP_CLK_CFG			(VA_MISC_BASE + 0x244)
+	/* PERIP_CLK_CFG bit values */
+	#define SPEAR1310_GPT_OSC24_VAL			0
+	#define SPEAR1310_GPT_APB_VAL			1
+	#define SPEAR1310_GPT_CLK_MASK			1
+	#define SPEAR1310_GPT3_CLK_SHIFT		11
+	#define SPEAR1310_GPT2_CLK_SHIFT		10
+	#define SPEAR1310_GPT1_CLK_SHIFT		9
+	#define SPEAR1310_GPT0_CLK_SHIFT		8
+	#define SPEAR1310_UART_CLK_PLL5_VAL		0
+	#define SPEAR1310_UART_CLK_OSC24_VAL		1
+	#define SPEAR1310_UART_CLK_SYNT_VAL		2
+	#define SPEAR1310_UART_CLK_MASK			2
+	#define SPEAR1310_UART_CLK_SHIFT		4
+
+	#define SPEAR1310_AUX_CLK_PLL5_VAL		0
+	#define SPEAR1310_AUX_CLK_SYNT_VAL		1
+	#define SPEAR1310_CLCD_CLK_MASK			2
+	#define SPEAR1310_CLCD_CLK_SHIFT		2
+	#define SPEAR1310_C3_CLK_MASK			1
+	#define SPEAR1310_C3_CLK_SHIFT			1
+
+#define SPEAR1310_GMAC_CLK_CFG			(VA_MISC_BASE + 0x248)
+	#define SPEAR1310_GMAC_PHY_IF_SEL_MASK		3
+	#define SPEAR1310_GMAC_PHY_IF_SEL_SHIFT		4
+	#define SPEAR1310_GMAC_PHY_CLK_MASK		1
+	#define SPEAR1310_GMAC_PHY_CLK_SHIFT		3
+	#define SPEAR1310_GMAC_PHY_INPUT_CLK_MASK	2
+	#define SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT	1
+
+#define SPEAR1310_I2S_CLK_CFG			(VA_MISC_BASE + 0x24C)
+	/* I2S_CLK_CFG register mask */
+	#define SPEAR1310_I2S_SCLK_X_MASK		0x1F
+	#define SPEAR1310_I2S_SCLK_X_SHIFT		27
+	#define SPEAR1310_I2S_SCLK_Y_MASK		0x1F
+	#define SPEAR1310_I2S_SCLK_Y_SHIFT		22
+	#define SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT		21
+	#define SPEAR1310_I2S_SCLK_SYNTH_ENB		20
+	#define SPEAR1310_I2S_PRS1_CLK_X_MASK		0xFF
+	#define SPEAR1310_I2S_PRS1_CLK_X_SHIFT		12
+	#define SPEAR1310_I2S_PRS1_CLK_Y_MASK		0xFF
+	#define SPEAR1310_I2S_PRS1_CLK_Y_SHIFT		4
+	#define SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT		3
+	#define SPEAR1310_I2S_REF_SEL_MASK		1
+	#define SPEAR1310_I2S_REF_SHIFT			2
+	#define SPEAR1310_I2S_SRC_CLK_MASK		2
+	#define SPEAR1310_I2S_SRC_CLK_SHIFT		0
+
+#define SPEAR1310_C3_CLK_SYNT			(VA_MISC_BASE + 0x250)
+#define SPEAR1310_UART_CLK_SYNT			(VA_MISC_BASE + 0x254)
+#define SPEAR1310_GMAC_CLK_SYNT			(VA_MISC_BASE + 0x258)
+#define SPEAR1310_SDHCI_CLK_SYNT		(VA_MISC_BASE + 0x25C)
+#define SPEAR1310_CFXD_CLK_SYNT			(VA_MISC_BASE + 0x260)
+#define SPEAR1310_ADC_CLK_SYNT			(VA_MISC_BASE + 0x264)
+#define SPEAR1310_AMBA_CLK_SYNT			(VA_MISC_BASE + 0x268)
+#define SPEAR1310_CLCD_CLK_SYNT			(VA_MISC_BASE + 0x270)
+#define SPEAR1310_RAS_CLK_SYNT0			(VA_MISC_BASE + 0x280)
+#define SPEAR1310_RAS_CLK_SYNT1			(VA_MISC_BASE + 0x288)
+#define SPEAR1310_RAS_CLK_SYNT2			(VA_MISC_BASE + 0x290)
+#define SPEAR1310_RAS_CLK_SYNT3			(VA_MISC_BASE + 0x298)
+	/* Check Fractional synthesizer reg masks */
+
+#define SPEAR1310_PERIP1_CLK_ENB		(VA_MISC_BASE + 0x300)
+	/* PERIP1_CLK_ENB register masks */
+	#define SPEAR1310_RTC_CLK_ENB			31
+	#define SPEAR1310_ADC_CLK_ENB			30
+	#define SPEAR1310_C3_CLK_ENB			29
+	#define SPEAR1310_JPEG_CLK_ENB			28
+	#define SPEAR1310_CLCD_CLK_ENB			27
+	#define SPEAR1310_DMA_CLK_ENB			25
+	#define SPEAR1310_GPIO1_CLK_ENB			24
+	#define SPEAR1310_GPIO0_CLK_ENB			23
+	#define SPEAR1310_GPT1_CLK_ENB			22
+	#define SPEAR1310_GPT0_CLK_ENB			21
+	#define SPEAR1310_I2S0_CLK_ENB			20
+	#define SPEAR1310_I2S1_CLK_ENB			19
+	#define SPEAR1310_I2C0_CLK_ENB			18
+	#define SPEAR1310_SSP_CLK_ENB			17
+	#define SPEAR1310_UART_CLK_ENB			15
+	#define SPEAR1310_PCIE_SATA_2_CLK_ENB		14
+	#define SPEAR1310_PCIE_SATA_1_CLK_ENB		13
+	#define SPEAR1310_PCIE_SATA_0_CLK_ENB		12
+	#define SPEAR1310_UOC_CLK_ENB			11
+	#define SPEAR1310_UHC1_CLK_ENB			10
+	#define SPEAR1310_UHC0_CLK_ENB			9
+	#define SPEAR1310_GMAC_CLK_ENB			8
+	#define SPEAR1310_CFXD_CLK_ENB			7
+	#define SPEAR1310_SDHCI_CLK_ENB			6
+	#define SPEAR1310_SMI_CLK_ENB			5
+	#define SPEAR1310_FSMC_CLK_ENB			4
+	#define SPEAR1310_SYSRAM0_CLK_ENB		3
+	#define SPEAR1310_SYSRAM1_CLK_ENB		2
+	#define SPEAR1310_SYSROM_CLK_ENB		1
+	#define SPEAR1310_BUS_CLK_ENB			0
+
+#define SPEAR1310_PERIP2_CLK_ENB		(VA_MISC_BASE + 0x304)
+	/* PERIP2_CLK_ENB register masks */
+	#define SPEAR1310_THSENS_CLK_ENB		8
+	#define SPEAR1310_I2S_REF_PAD_CLK_ENB		7
+	#define SPEAR1310_ACP_CLK_ENB			6
+	#define SPEAR1310_GPT3_CLK_ENB			5
+	#define SPEAR1310_GPT2_CLK_ENB			4
+	#define SPEAR1310_KBD_CLK_ENB			3
+	#define SPEAR1310_CPU_DBG_CLK_ENB		2
+	#define SPEAR1310_DDR_CORE_CLK_ENB		1
+	#define SPEAR1310_DDR_CTRL_CLK_ENB		0
+
+#define SPEAR1310_RAS_CLK_ENB			(VA_MISC_BASE + 0x310)
+	/* RAS_CLK_ENB register masks */
+	#define SPEAR1310_SYNT3_CLK_ENB			17
+	#define SPEAR1310_SYNT2_CLK_ENB			16
+	#define SPEAR1310_SYNT1_CLK_ENB			15
+	#define SPEAR1310_SYNT0_CLK_ENB			14
+	#define SPEAR1310_PCLK3_CLK_ENB			13
+	#define SPEAR1310_PCLK2_CLK_ENB			12
+	#define SPEAR1310_PCLK1_CLK_ENB			11
+	#define SPEAR1310_PCLK0_CLK_ENB			10
+	#define SPEAR1310_PLL3_CLK_ENB			9
+	#define SPEAR1310_PLL2_CLK_ENB			8
+	#define SPEAR1310_C125M_PAD_CLK_ENB		7
+	#define SPEAR1310_C30M_CLK_ENB			6
+	#define SPEAR1310_C48M_CLK_ENB			5
+	#define SPEAR1310_OSC_25M_CLK_ENB		4
+	#define SPEAR1310_OSC_32K_CLK_ENB		3
+	#define SPEAR1310_OSC_24M_CLK_ENB		2
+	#define SPEAR1310_PCLK_CLK_ENB			1
+	#define SPEAR1310_ACLK_CLK_ENB			0
+
+static DEFINE_SPINLOCK(_lock);
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	/* PCLK 24MHz */
+	{.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
+	{.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/* vco-pll4 rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll4_rtbl[] = {
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For VCO1div2 = 500 MHz */
+	{.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+};
+
+/* gmac rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl gmac_rtbl[] = {
+	/* For gmac phy input clk */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */
+};
+
+/* clcd rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl clcd_rtbl[] = {
+	{.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
+	{.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+	{.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
+	{.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
+};
+
+/* i2s prescaler1 masks */
+static struct aux_clk_masks i2s_prs1_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_X_MASK,
+	.xscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_Y_SHIFT,
+};
+
+/* i2s sclk (bit clock) syynthesizers masks */
+static struct aux_clk_masks i2s_sclk_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1310_I2S_SCLK_X_MASK,
+	.xscale_sel_shift = SPEAR1310_I2S_SCLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1310_I2S_SCLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1310_I2S_SCLK_Y_SHIFT,
+	.enable_bit = SPEAR1310_I2S_SCLK_SYNTH_ENB,
+};
+
+/* i2s prs1 aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_prs1_rtbl[] = {
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */
+};
+
+/* i2s sclk aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_sclk_rtbl[] = {
+	/* For i2s_ref_clk = 12.288MHz */
+	{.xscale = 1, .yscale = 4, .eq = 0}, /* 1.53 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 0}, /* 3.07 Mhz */
+};
+
+/* adc rate configuration table, in ascending order of rates */
+/* possible adc range is 2.5 MHz to 20 MHz. */
+static struct aux_rate_tbl adc_rtbl[] = {
+	/* For ahb = 166.67 MHz */
+	{.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */
+	{.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */
+	{.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */
+};
+
+/* General synth rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl gen_rtbl[] = {
+	/* For vco1div4 = 250 MHz */
+	{.div = 0x14000}, /* 25 MHz */
+	{.div = 0x0A000}, /* 50 MHz */
+	{.div = 0x05000}, /* 100 MHz */
+	{.div = 0x02000}, /* 250 MHz */
+};
+
+/* clock parents */
+static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
+static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
+static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
+static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+	"osc_25m_clk", };
+static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
+	"gmac_phy_synth_gate_clk", };
+static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk",
+	"i2s_src_pad_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll3_clk", };
+static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll2_clk", };
+static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none",
+	"ras_pll2_clk", "ras_synth0_clk", };
+static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk",
+	"ras_pll2_clk", "ras_synth0_clk", };
+static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", };
+static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", };
+static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk",
+	"ras_plclk0_clk", };
+static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", };
+static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", };
+
+void __init spear1310_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+			24000000);
+	clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT,
+			25000000);
+	clk_register_clkdev(clk, "osc_25m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
+			CLK_IS_ROOT, 125000000);
+	clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
+			CLK_IS_ROOT, 12288000);
+	clk_register_clkdev(clk, "i2s_src_pad_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_RTC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+	/* clock derived from 24 or 25 MHz osc clk */
+	/* vco-pll */
+	clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+			SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco1_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", "vco1_gate_clk",
+			"vco1_mux_clk", 0, SPEAR1310_PLL1_CTR,
+			SPEAR1310_PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+			SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco2_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", "vco2_gate_clk",
+			"vco2_mux_clk", 0, SPEAR1310_PLL2_CTR,
+			SPEAR1310_PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+			SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco3_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco3_clk", "pll3_clk", "vco3_gate_clk",
+			"vco3_mux_clk", 0, SPEAR1310_PLL3_CTR,
+			SPEAR1310_PLL3_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco3_clk", NULL);
+	clk_register_clkdev(clk1, "pll3_clk", NULL);
+
+	clk = clk_register_vco_pll("vco4_clk", "pll4_clk", "vco4_gate_clk",
+			"osc_24m_clk", 0, SPEAR1310_PLL4_CTR,
+			SPEAR1310_PLL4_FRQ, pll4_rtbl, ARRAY_SIZE(pll4_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco4_clk", NULL);
+	clk_register_clkdev(clk1, "pll4_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll5_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0,
+			25000000);
+	clk_register_clkdev(clk, "pll6_clk", NULL);
+
+	/* vco div n clocks */
+	clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco1div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1,
+			4);
+	clk_register_clkdev(clk, "vco1div4_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco2div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco3div2_clk", NULL);
+
+	/* peripherals */
+	clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
+			128);
+	clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_thermal");
+
+	/* clock derived from pll4 clk */
+	clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 2);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, NULL, "mpcore_wdt");
+
+	clk = clk_register_fixed_factor(NULL, "ahb_clk", "pll1_clk", 0, 1,
+			6);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "apb_clk", "pll1_clk", 0, 1,
+			12);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	/* gpt clocks */
+	clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt3");
+
+	/* others */
+	clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+			ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0000000.serial");
+
+	clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
+	clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b3000000.sdhci");
+
+	clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
+	clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2800000.cf");
+	clk_register_clkdev(clk, NULL, "arasan_xd");
+
+	clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "c3_synth_clk", NULL);
+	clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+			ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "c3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c3");
+
+	/* gmac */
+	clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
+			gmac_phy_input_parents,
+			ARRAY_SIZE(gmac_phy_input_parents), 0,
+			SPEAR1310_GMAC_CLK_CFG,
+			SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT,
+			SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+
+	clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
+			"gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT,
+			NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+			ARRAY_SIZE(gmac_phy_parents), 0,
+			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT,
+			SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.0");
+
+	/* clcd */
+	clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+			ARRAY_SIZE(clcd_synth_parents), 0,
+			SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT,
+			SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+
+	clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+			SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl,
+			ARRAY_SIZE(clcd_rtbl), &_lock);
+	clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+			ARRAY_SIZE(clcd_pixel_parents), 0,
+			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT,
+			SPEAR1310_CLCD_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+
+	clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "clcd_clk", NULL);
+
+	/* i2s */
+	clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+			ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG,
+			SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_src_clk", NULL);
+
+	clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+			SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
+			ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
+	clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG,
+			SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
+
+	clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+			"i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG,
+			&i2s_sclk_masks, i2s_sclk_rtbl,
+			ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
+	clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+
+	/* clock derived from ahb clk */
+	clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2C0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0280000.i2c");
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_DMA_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea800000.dma");
+	clk_register_clkdev(clk, NULL, "eb000000.dma");
+
+	clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_JPEG_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2000000.jpeg");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GMAC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e2000000.eth");
+
+	clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_FSMC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b0000000.flash");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SMI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea000000.flash");
+
+	clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UOC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "uoc");
+
+	clk = clk_register_gate(NULL, "pcie_sata_0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_0_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie.0");
+	clk_register_clkdev(clk, NULL, "ahci.0");
+
+	clk = clk_register_gate(NULL, "pcie_sata_1_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_1_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie.1");
+	clk_register_clkdev(clk, NULL, "ahci.1");
+
+	clk = clk_register_gate(NULL, "pcie_sata_2_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_2_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie.2");
+	clk_register_clkdev(clk, NULL, "ahci.2");
+
+	clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram1_clk", NULL);
+
+	clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+			0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl,
+			ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "adc_synth_clk", NULL);
+	clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "adc_clk");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SSP_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0100000.spi");
+
+	clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0600000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0680000.gpio");
+
+	clk = clk_register_gate(NULL, "i2s0_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0180000.i2s");
+
+	clk = clk_register_gate(NULL, "i2s1_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0200000.i2s");
+
+	clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_KBD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0300000.kbd");
+
+	/* RAS clks */
+	clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
+			gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
+			0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
+			SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
+			gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
+			0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
+			SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+
+	clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+
+	clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+
+	clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+
+	clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_osc_24m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_osc_25m_clk", "osc_25m_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_25M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_osc_25m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_osc_32k_clk", "osc_32k_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_32K_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_osc_32k_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_pll3_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_tx125_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "ras_30m_fixed_clk", "pll5_clk", 0,
+			30000000);
+	clk = clk_register_gate(NULL, "ras_30m_clk", "ras_30m_fixed_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_C30M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_30m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "ras_48m_fixed_clk", "pll5_clk", 0,
+			48000000);
+	clk = clk_register_gate(NULL, "ras_48m_clk", "ras_48m_fixed_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_C48M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_48m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_ACLK_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_PCLK_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "ras_plclk0_clk", NULL, CLK_IS_ROOT,
+			50000000);
+
+	clk = clk_register_fixed_rate(NULL, "ras_tx50_clk", NULL, CLK_IS_ROOT,
+			50000000);
+
+	clk = clk_register_gate(NULL, "can0_clk", "apb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+	clk = clk_register_gate(NULL, "can1_clk", "apb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+	clk = clk_register_gate(NULL, "ras_smii0_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c400000.eth");
+
+	clk = clk_register_gate(NULL, "ras_smii1_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c500000.eth");
+
+	clk = clk_register_gate(NULL, "ras_smii2_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c600000.eth");
+
+	clk = clk_register_gate(NULL, "ras_rgmii_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_GMII_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c700000.eth");
+
+	clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk",
+			smii_rgmii_phy_parents,
+			ARRAY_SIZE(smii_rgmii_phy_parents), 0,
+			SPEAR1310_RAS_CTRL_REG1,
+			SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT,
+			SPEAR1310_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.1");
+	clk_register_clkdev(clk, NULL, "stmmacphy.2");
+	clk_register_clkdev(clk, NULL, "stmmacphy.4");
+
+	clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents,
+			ARRAY_SIZE(rmii_phy_parents), 0,
+			SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT,
+			SPEAR1310_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.3");
+
+	clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c800000.serial");
+
+	clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c900000.serial");
+
+	clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5ca00000.serial");
+
+	clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart4_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cb00000.serial");
+
+	clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart5_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cc00000.serial");
+
+	clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cd00000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5ce00000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cf00000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c4_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d000000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c5_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d100000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c6_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d200000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c7_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d300000.i2c");
+
+	clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents,
+			ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ssp1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d400000.spi");
+
+	clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents,
+			ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "pci_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "pci");
+
+	clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents,
+			ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "tdm1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "tdm_hdlc.0");
+
+	clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents,
+			ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "tdm2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "tdm_hdlc.1");
+}
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
new file mode 100644
index 0000000..f0b8864
--- /dev/null
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -0,0 +1,968 @@
+/*
+ * arch/arm/mach-spear13xx/spear1340_clock.c
+ *
+ * SPEAr1340 machine clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include "clk.h"
+
+/* Clock Configuration Registers */
+#define SPEAR1340_SYS_CLK_CTRL			(VA_MISC_BASE + 0x200)
+	#define SPEAR1340_HCLK_SRC_SEL_SHIFT	27
+	#define SPEAR1340_HCLK_SRC_SEL_MASK	1
+	#define SPEAR1340_SCLK_SRC_SEL_SHIFT	23
+	#define SPEAR1340_SCLK_SRC_SEL_MASK	3
+
+/* PLL related registers and bit values */
+#define SPEAR1340_PLL_CFG			(VA_MISC_BASE + 0x210)
+	/* PLL_CFG bit values */
+	#define SPEAR1340_CLCD_SYNT_CLK_MASK		1
+	#define SPEAR1340_CLCD_SYNT_CLK_SHIFT		31
+	#define SPEAR1340_GEN_SYNT2_3_CLK_SHIFT		29
+	#define SPEAR1340_GEN_SYNT_CLK_MASK		2
+	#define SPEAR1340_GEN_SYNT0_1_CLK_SHIFT		27
+	#define SPEAR1340_PLL_CLK_MASK			2
+	#define SPEAR1340_PLL3_CLK_SHIFT		24
+	#define SPEAR1340_PLL2_CLK_SHIFT		22
+	#define SPEAR1340_PLL1_CLK_SHIFT		20
+
+#define SPEAR1340_PLL1_CTR			(VA_MISC_BASE + 0x214)
+#define SPEAR1340_PLL1_FRQ			(VA_MISC_BASE + 0x218)
+#define SPEAR1340_PLL2_CTR			(VA_MISC_BASE + 0x220)
+#define SPEAR1340_PLL2_FRQ			(VA_MISC_BASE + 0x224)
+#define SPEAR1340_PLL3_CTR			(VA_MISC_BASE + 0x22C)
+#define SPEAR1340_PLL3_FRQ			(VA_MISC_BASE + 0x230)
+#define SPEAR1340_PLL4_CTR			(VA_MISC_BASE + 0x238)
+#define SPEAR1340_PLL4_FRQ			(VA_MISC_BASE + 0x23C)
+#define SPEAR1340_PERIP_CLK_CFG			(VA_MISC_BASE + 0x244)
+	/* PERIP_CLK_CFG bit values */
+	#define SPEAR1340_SPDIF_CLK_MASK		1
+	#define SPEAR1340_SPDIF_OUT_CLK_SHIFT		15
+	#define SPEAR1340_SPDIF_IN_CLK_SHIFT		14
+	#define SPEAR1340_GPT3_CLK_SHIFT		13
+	#define SPEAR1340_GPT2_CLK_SHIFT		12
+	#define SPEAR1340_GPT_CLK_MASK			1
+	#define SPEAR1340_GPT1_CLK_SHIFT		9
+	#define SPEAR1340_GPT0_CLK_SHIFT		8
+	#define SPEAR1340_UART_CLK_MASK			2
+	#define SPEAR1340_UART1_CLK_SHIFT		6
+	#define SPEAR1340_UART0_CLK_SHIFT		4
+	#define SPEAR1340_CLCD_CLK_MASK			2
+	#define SPEAR1340_CLCD_CLK_SHIFT		2
+	#define SPEAR1340_C3_CLK_MASK			1
+	#define SPEAR1340_C3_CLK_SHIFT			1
+
+#define SPEAR1340_GMAC_CLK_CFG			(VA_MISC_BASE + 0x248)
+	#define SPEAR1340_GMAC_PHY_CLK_MASK		1
+	#define SPEAR1340_GMAC_PHY_CLK_SHIFT		2
+	#define SPEAR1340_GMAC_PHY_INPUT_CLK_MASK	2
+	#define SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT	0
+
+#define SPEAR1340_I2S_CLK_CFG			(VA_MISC_BASE + 0x24C)
+	/* I2S_CLK_CFG register mask */
+	#define SPEAR1340_I2S_SCLK_X_MASK		0x1F
+	#define SPEAR1340_I2S_SCLK_X_SHIFT		27
+	#define SPEAR1340_I2S_SCLK_Y_MASK		0x1F
+	#define SPEAR1340_I2S_SCLK_Y_SHIFT		22
+	#define SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT		21
+	#define SPEAR1340_I2S_SCLK_SYNTH_ENB		20
+	#define SPEAR1340_I2S_PRS1_CLK_X_MASK		0xFF
+	#define SPEAR1340_I2S_PRS1_CLK_X_SHIFT		12
+	#define SPEAR1340_I2S_PRS1_CLK_Y_MASK		0xFF
+	#define SPEAR1340_I2S_PRS1_CLK_Y_SHIFT		4
+	#define SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT		3
+	#define SPEAR1340_I2S_REF_SEL_MASK		1
+	#define SPEAR1340_I2S_REF_SHIFT			2
+	#define SPEAR1340_I2S_SRC_CLK_MASK		2
+	#define SPEAR1340_I2S_SRC_CLK_SHIFT		0
+
+#define SPEAR1340_C3_CLK_SYNT			(VA_MISC_BASE + 0x250)
+#define SPEAR1340_UART0_CLK_SYNT		(VA_MISC_BASE + 0x254)
+#define SPEAR1340_UART1_CLK_SYNT		(VA_MISC_BASE + 0x258)
+#define SPEAR1340_GMAC_CLK_SYNT			(VA_MISC_BASE + 0x25C)
+#define SPEAR1340_SDHCI_CLK_SYNT		(VA_MISC_BASE + 0x260)
+#define SPEAR1340_CFXD_CLK_SYNT			(VA_MISC_BASE + 0x264)
+#define SPEAR1340_ADC_CLK_SYNT			(VA_MISC_BASE + 0x270)
+#define SPEAR1340_AMBA_CLK_SYNT			(VA_MISC_BASE + 0x274)
+#define SPEAR1340_CLCD_CLK_SYNT			(VA_MISC_BASE + 0x27C)
+#define SPEAR1340_SYS_CLK_SYNT			(VA_MISC_BASE + 0x284)
+#define SPEAR1340_GEN_CLK_SYNT0			(VA_MISC_BASE + 0x28C)
+#define SPEAR1340_GEN_CLK_SYNT1			(VA_MISC_BASE + 0x294)
+#define SPEAR1340_GEN_CLK_SYNT2			(VA_MISC_BASE + 0x29C)
+#define SPEAR1340_GEN_CLK_SYNT3			(VA_MISC_BASE + 0x304)
+#define SPEAR1340_PERIP1_CLK_ENB		(VA_MISC_BASE + 0x30C)
+	#define SPEAR1340_RTC_CLK_ENB			31
+	#define SPEAR1340_ADC_CLK_ENB			30
+	#define SPEAR1340_C3_CLK_ENB			29
+	#define SPEAR1340_CLCD_CLK_ENB			27
+	#define SPEAR1340_DMA_CLK_ENB			25
+	#define SPEAR1340_GPIO1_CLK_ENB			24
+	#define SPEAR1340_GPIO0_CLK_ENB			23
+	#define SPEAR1340_GPT1_CLK_ENB			22
+	#define SPEAR1340_GPT0_CLK_ENB			21
+	#define SPEAR1340_I2S_PLAY_CLK_ENB		20
+	#define SPEAR1340_I2S_REC_CLK_ENB		19
+	#define SPEAR1340_I2C0_CLK_ENB			18
+	#define SPEAR1340_SSP_CLK_ENB			17
+	#define SPEAR1340_UART0_CLK_ENB			15
+	#define SPEAR1340_PCIE_SATA_CLK_ENB		12
+	#define SPEAR1340_UOC_CLK_ENB			11
+	#define SPEAR1340_UHC1_CLK_ENB			10
+	#define SPEAR1340_UHC0_CLK_ENB			9
+	#define SPEAR1340_GMAC_CLK_ENB			8
+	#define SPEAR1340_CFXD_CLK_ENB			7
+	#define SPEAR1340_SDHCI_CLK_ENB			6
+	#define SPEAR1340_SMI_CLK_ENB			5
+	#define SPEAR1340_FSMC_CLK_ENB			4
+	#define SPEAR1340_SYSRAM0_CLK_ENB		3
+	#define SPEAR1340_SYSRAM1_CLK_ENB		2
+	#define SPEAR1340_SYSROM_CLK_ENB		1
+	#define SPEAR1340_BUS_CLK_ENB			0
+
+#define SPEAR1340_PERIP2_CLK_ENB		(VA_MISC_BASE + 0x310)
+	#define SPEAR1340_THSENS_CLK_ENB		8
+	#define SPEAR1340_I2S_REF_PAD_CLK_ENB		7
+	#define SPEAR1340_ACP_CLK_ENB			6
+	#define SPEAR1340_GPT3_CLK_ENB			5
+	#define SPEAR1340_GPT2_CLK_ENB			4
+	#define SPEAR1340_KBD_CLK_ENB			3
+	#define SPEAR1340_CPU_DBG_CLK_ENB		2
+	#define SPEAR1340_DDR_CORE_CLK_ENB		1
+	#define SPEAR1340_DDR_CTRL_CLK_ENB		0
+
+#define SPEAR1340_PERIP3_CLK_ENB		(VA_MISC_BASE + 0x314)
+	#define SPEAR1340_PLGPIO_CLK_ENB		18
+	#define SPEAR1340_VIDEO_DEC_CLK_ENB		16
+	#define SPEAR1340_VIDEO_ENC_CLK_ENB		15
+	#define SPEAR1340_SPDIF_OUT_CLK_ENB		13
+	#define SPEAR1340_SPDIF_IN_CLK_ENB		12
+	#define SPEAR1340_VIDEO_IN_CLK_ENB		11
+	#define SPEAR1340_CAM0_CLK_ENB			10
+	#define SPEAR1340_CAM1_CLK_ENB			9
+	#define SPEAR1340_CAM2_CLK_ENB			8
+	#define SPEAR1340_CAM3_CLK_ENB			7
+	#define SPEAR1340_MALI_CLK_ENB			6
+	#define SPEAR1340_CEC0_CLK_ENB			5
+	#define SPEAR1340_CEC1_CLK_ENB			4
+	#define SPEAR1340_PWM_CLK_ENB			3
+	#define SPEAR1340_I2C1_CLK_ENB			2
+	#define SPEAR1340_UART1_CLK_ENB			1
+
+static DEFINE_SPINLOCK(_lock);
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	/* PCLK 24MHz */
+	{.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
+	{.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+	{.mode = 0, .m = 0x96, .n = 0x06, .p = 0x0}, /* vco 1200, pll 1200 MHz */
+};
+
+/* vco-pll4 rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll4_rtbl[] = {
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/*
+ * All below entries generate 166 MHz for
+ * different values of vco1div2
+ */
+static struct frac_rate_tbl amba_synth_rtbl[] = {
+	{.div = 0x06062}, /* for vco1div2 = 500 MHz */
+	{.div = 0x04D1B}, /* for vco1div2 = 400 MHz */
+	{.div = 0x04000}, /* for vco1div2 = 332 MHz */
+	{.div = 0x03031}, /* for vco1div2 = 250 MHz */
+	{.div = 0x0268D}, /* for vco1div2 = 200 MHz */
+};
+
+/*
+ * Synthesizer Clock derived from vcodiv2. This clock is one of the
+ * possible clocks to feed cpu directly.
+ * We can program this synthesizer to make cpu run on different clock
+ * frequencies.
+ * Following table provides configuration values to let cpu run on 200,
+ * 250, 332, 400 or 500 MHz considering different possibilites of input
+ * (vco1div2) clock.
+ *
+ * --------------------------------------------------------------------
+ * vco1div2(Mhz)	fout(Mhz)	cpuclk = fout/2		div
+ * --------------------------------------------------------------------
+ * 400			200		100			0x04000
+ * 400			250		125			0x03333
+ * 400			332		166			0x0268D
+ * 400			400		200			0x02000
+ * --------------------------------------------------------------------
+ * 500			200		100			0x05000
+ * 500			250		125			0x04000
+ * 500			332		166			0x03031
+ * 500			400		200			0x02800
+ * 500			500		250			0x02000
+ * --------------------------------------------------------------------
+ * 664			200		100			0x06a38
+ * 664			250		125			0x054FD
+ * 664			332		166			0x04000
+ * 664			400		200			0x0351E
+ * 664			500		250			0x02A7E
+ * --------------------------------------------------------------------
+ * 800			200		100			0x08000
+ * 800			250		125			0x06666
+ * 800			332		166			0x04D18
+ * 800			400		200			0x04000
+ * 800			500		250			0x03333
+ * --------------------------------------------------------------------
+ * sys rate configuration table is in descending order of divisor.
+ */
+static struct frac_rate_tbl sys_synth_rtbl[] = {
+	{.div = 0x08000},
+	{.div = 0x06a38},
+	{.div = 0x06666},
+	{.div = 0x054FD},
+	{.div = 0x05000},
+	{.div = 0x04D18},
+	{.div = 0x04000},
+	{.div = 0x0351E},
+	{.div = 0x03333},
+	{.div = 0x03031},
+	{.div = 0x02A7E},
+	{.div = 0x02800},
+	{.div = 0x0268D},
+	{.div = 0x02000},
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For VCO1div2 = 500 MHz */
+	{.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+};
+
+/* gmac rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl gmac_rtbl[] = {
+	/* For gmac phy input clk */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */
+};
+
+/* clcd rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl clcd_rtbl[] = {
+	{.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
+	{.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+	{.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
+	{.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/
+};
+
+/* i2s prescaler1 masks */
+static struct aux_clk_masks i2s_prs1_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_X_MASK,
+	.xscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_Y_SHIFT,
+};
+
+/* i2s sclk (bit clock) syynthesizers masks */
+static struct aux_clk_masks i2s_sclk_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1340_I2S_SCLK_X_MASK,
+	.xscale_sel_shift = SPEAR1340_I2S_SCLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1340_I2S_SCLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1340_I2S_SCLK_Y_SHIFT,
+	.enable_bit = SPEAR1340_I2S_SCLK_SYNTH_ENB,
+};
+
+/* i2s prs1 aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_prs1_rtbl[] = {
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */
+	{.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */
+	{.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */
+	{.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */
+
+	/*
+	 * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz
+	 * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz
+	 */
+	{.xscale = 1, .yscale = 3, .eq = 0},
+
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/
+	{.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz, smp freq = 48Khz*/
+};
+
+/* i2s sclk aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_sclk_rtbl[] = {
+	/* For sclk = ref_clk * x/2/y */
+	{.xscale = 1, .yscale = 4, .eq = 0},
+	{.xscale = 1, .yscale = 2, .eq = 0},
+};
+
+/* adc rate configuration table, in ascending order of rates */
+/* possible adc range is 2.5 MHz to 20 MHz. */
+static struct aux_rate_tbl adc_rtbl[] = {
+	/* For ahb = 166.67 MHz */
+	{.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */
+	{.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */
+	{.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */
+};
+
+/* General synth rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl gen_rtbl[] = {
+	/* For vco1div4 = 250 MHz */
+	{.div = 0x1624E}, /* 22.5792 MHz */
+	{.div = 0x14585}, /* 24.576 MHz */
+	{.div = 0x14000}, /* 25 MHz */
+	{.div = 0x0B127}, /* 45.1584 MHz */
+	{.div = 0x0A000}, /* 50 MHz */
+	{.div = 0x061A8}, /* 81.92 MHz */
+	{.div = 0x05000}, /* 100 MHz */
+	{.div = 0x02800}, /* 200 MHz */
+	{.div = 0x02620}, /* 210 MHz */
+	{.div = 0x02460}, /* 220 MHz */
+	{.div = 0x022C0}, /* 230 MHz */
+	{.div = 0x02160}, /* 240 MHz */
+	{.div = 0x02000}, /* 250 MHz */
+};
+
+/* clock parents */
+static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
+static const char *sys_parents[] = { "none", "pll1_clk", "none", "none",
+	"sys_synth_clk", "none", "pll2_clk", "pll3_clk", };
+static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", };
+static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
+static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
+	"uart0_synth_gate_clk", };
+static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk",
+	"uart1_synth_gate_clk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
+static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+	"osc_25m_clk", };
+static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
+	"gmac_phy_synth_gate_clk", };
+static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk",
+	"i2s_src_pad_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk",
+};
+static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", };
+
+static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll3_clk", };
+static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll2_clk", };
+
+void __init spear1340_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+			24000000);
+	clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT,
+			25000000);
+	clk_register_clkdev(clk, "osc_25m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
+			CLK_IS_ROOT, 125000000);
+	clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
+			CLK_IS_ROOT, 12288000);
+	clk_register_clkdev(clk, "i2s_src_pad_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+	/* clock derived from 24 or 25 MHz osc clk */
+	/* vco-pll */
+	clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+			SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco1_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", "vco1_gate_clk",
+			"vco1_mux_clk", 0, SPEAR1340_PLL1_CTR,
+			SPEAR1340_PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+			SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco2_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", "vco2_gate_clk",
+			"vco2_mux_clk", 0, SPEAR1340_PLL2_CTR,
+			SPEAR1340_PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+			SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco3_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco3_clk", "pll3_clk", "vco3_gate_clk",
+			"vco3_mux_clk", 0, SPEAR1340_PLL3_CTR,
+			SPEAR1340_PLL3_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco3_clk", NULL);
+	clk_register_clkdev(clk1, "pll3_clk", NULL);
+
+	clk = clk_register_vco_pll("vco4_clk", "pll4_clk", "vco4_gate_clk",
+			"osc_24m_clk", 0, SPEAR1340_PLL4_CTR,
+			SPEAR1340_PLL4_FRQ, pll4_rtbl, ARRAY_SIZE(pll4_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco4_clk", NULL);
+	clk_register_clkdev(clk1, "pll4_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll5_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0,
+			25000000);
+	clk_register_clkdev(clk, "pll6_clk", NULL);
+
+	/* vco div n clocks */
+	clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco1div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1,
+			4);
+	clk_register_clkdev(clk, "vco1div4_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco2div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco3div2_clk", NULL);
+
+	/* peripherals */
+	clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
+			128);
+	clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_thermal");
+
+	/* clock derived from pll4 clk */
+	clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0,
+			SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl,
+			ARRAY_SIZE(sys_synth_rtbl), &_lock);
+	clk_register_clkdev(clk, "sys_synth_clk", NULL);
+
+	clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0,
+			SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl,
+			ARRAY_SIZE(amba_synth_rtbl), &_lock);
+	clk_register_clkdev(clk, "amba_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents,
+			ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
+			SPEAR1340_SCLK_SRC_SEL_SHIFT,
+			SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "sys_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "cpu_div3_clk", "cpu_clk", 0, 1,
+			3);
+	clk_register_clkdev(clk, "cpu_div3_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, NULL, "mpcore_wdt");
+
+	clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
+			ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL,
+			SPEAR1340_HCLK_SRC_SEL_SHIFT,
+			SPEAR1340_HCLK_SRC_SEL_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	/* gpt clocks */
+	clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt3");
+
+	/* others */
+	clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart0_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+			ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0000000.serial");
+
+	clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart1_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents,
+			ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b4100000.serial");
+
+	clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
+	clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b3000000.sdhci");
+
+	clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
+	clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2800000.cf");
+	clk_register_clkdev(clk, NULL, "arasan_xd");
+
+	clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "c3_synth_clk", NULL);
+	clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+			ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "c3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c3");
+
+	/* gmac */
+	clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
+			gmac_phy_input_parents,
+			ARRAY_SIZE(gmac_phy_input_parents), 0,
+			SPEAR1340_GMAC_CLK_CFG,
+			SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT,
+			SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+
+	clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
+			"gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT,
+			NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+			ARRAY_SIZE(gmac_phy_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
+			SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.0");
+
+	/* clcd */
+	clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+			ARRAY_SIZE(clcd_synth_parents), 0,
+			SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT,
+			SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+
+	clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+			SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl,
+			ARRAY_SIZE(clcd_rtbl), &_lock);
+	clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+			ARRAY_SIZE(clcd_pixel_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
+			SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+
+	clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "clcd_clk", NULL);
+
+	/* i2s */
+	clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+			ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
+			SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_src_clk", NULL);
+
+	clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+			SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
+			ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
+	clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
+			SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
+
+	clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+			"i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG,
+			&i2s_sclk_masks, i2s_sclk_rtbl,
+			ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
+	clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+
+	/* clock derived from ahb clk */
+	clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0280000.i2c");
+
+	clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b4000000.i2c");
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_DMA_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea800000.dma");
+	clk_register_clkdev(clk, NULL, "eb000000.dma");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GMAC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e2000000.eth");
+
+	clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_FSMC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b0000000.flash");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SMI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea000000.flash");
+
+	clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "uoc");
+
+	clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie");
+	clk_register_clkdev(clk, NULL, "ahci");
+
+	clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram1_clk", NULL);
+
+	clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+			0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl,
+			ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "adc_synth_clk", NULL);
+	clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "adc_clk");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SSP_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0100000.spi");
+
+	clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0600000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0680000.gpio");
+
+	clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2400000.i2s");
+
+	clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2000000.i2s");
+
+	clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0300000.kbd");
+
+	/* RAS clks */
+	clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
+			gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
+			0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
+			SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
+			gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
+			0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
+			SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+
+	clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+
+	clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+
+	clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+
+	clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+
+	clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "mali");
+
+	clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_cec.0");
+
+	clk = clk_register_gate(NULL, "cec1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_cec.1");
+
+	clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents,
+			ARRAY_SIZE(spdif_out_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
+			SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "spdif_out_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "spdif-out");
+
+	clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents,
+			ARRAY_SIZE(spdif_in_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
+			SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "spdif_in_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spdif-in");
+
+	clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "acp_clk");
+
+	clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "plgpio");
+
+	clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "video_dec");
+
+	clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "video_enc");
+
+	clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_vip");
+
+	clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.0");
+
+	clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.1");
+
+	clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.2");
+
+	clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.3");
+
+	clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "pwm");
+}
-- 
1.7.9

[PATCH 3/9] SPEAr13xx: Add common clock framework support

[Turquette, Mike]

On Fri, Apr 20, 2012 at 10:22 AM, Viresh Kumar <viresh.linux@gmail.com> wrote:
> This patch adds SPEAr1310 and SPEAr1340's clock framework support. It is based
> on earlier support for SPEAr3xx family.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
> Cc: Mike Turquette <mturquette@ti.com>
> ---
> Mike,
>
> This would be required to go through Arnd's tree. So would be great if i can
> have your comments/Ack here.

Most of this patch looks good to me accept for the two items below:

...

> +void __init spear1310_clk_init(void)
> +{
> + ? ? ? struct clk *clk, *clk1;
> +
> + ? ? ? clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
> + ? ? ? clk_register_clkdev(clk, "apb_pclk", NULL);

There is no exception handling at all in this function.  Do you just
expect to fail at some later point?

...

> +void __init spear1340_clk_init(void)
> +{
> + ? ? ? struct clk *clk, *clk1;
> +
> + ? ? ? clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
> + ? ? ? clk_register_clkdev(clk, "apb_pclk", NULL);

Ditto.

Regards,
Mike

[PATCH 3/9] SPEAr13xx: Add common clock framework support

[Viresh Kumar]

On 4/24/2012 3:13 AM, Turquette, Mike wrote:
>> > +void __init spear1310_clk_init(void)
>> > +{
>> > +       struct clk *clk, *clk1;
>> > +
>> > +       clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
>> > +       clk_register_clkdev(clk, "apb_pclk", NULL);
> There is no exception handling at all in this function.  Do you just
> expect to fail at some later point?

This is what Russell suggested in his clkdev patch. We don't have to check clk *
returned from clk_register_*(). This will be done in clk_register_clkdev(), clk
lookup wouldn't be registered for failing clocks.

-- 
viresh

[PATCH 4/9] pinctrl: SPEAr: Create macro for declaring GPIO PINS

[Viresh Kumar]

Same GPIO pins declarations would be required for other SoCs and that will be a
lot of lines of code. Its better to create common macros for it.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
Linus,

This would be required to go through Arnd's tree. So would be great if i can
have your comments/Ack here.

 drivers/pinctrl/spear/pinctrl-spear.h    |  105 ++++++++++++++++++++++++++++++
 drivers/pinctrl/spear/pinctrl-spear3xx.c |  103 +-----------------------------
 2 files changed, 106 insertions(+), 102 deletions(-)

diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
index 47a6b5b..1f51dc9 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.h
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -139,4 +139,109 @@ void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg);
 int __devinit spear_pinctrl_probe(struct platform_device *pdev,
 		struct spear_pinctrl_machdata *machdata);
 int __devexit spear_pinctrl_remove(struct platform_device *pdev);
+
+#define SPEAR_PIN_0_TO_101		\
+	PINCTRL_PIN(0, "PLGPIO0"),	\
+	PINCTRL_PIN(1, "PLGPIO1"),	\
+	PINCTRL_PIN(2, "PLGPIO2"),	\
+	PINCTRL_PIN(3, "PLGPIO3"),	\
+	PINCTRL_PIN(4, "PLGPIO4"),	\
+	PINCTRL_PIN(5, "PLGPIO5"),	\
+	PINCTRL_PIN(6, "PLGPIO6"),	\
+	PINCTRL_PIN(7, "PLGPIO7"),	\
+	PINCTRL_PIN(8, "PLGPIO8"),	\
+	PINCTRL_PIN(9, "PLGPIO9"),	\
+	PINCTRL_PIN(10, "PLGPIO10"),	\
+	PINCTRL_PIN(11, "PLGPIO11"),	\
+	PINCTRL_PIN(12, "PLGPIO12"),	\
+	PINCTRL_PIN(13, "PLGPIO13"),	\
+	PINCTRL_PIN(14, "PLGPIO14"),	\
+	PINCTRL_PIN(15, "PLGPIO15"),	\
+	PINCTRL_PIN(16, "PLGPIO16"),	\
+	PINCTRL_PIN(17, "PLGPIO17"),	\
+	PINCTRL_PIN(18, "PLGPIO18"),	\
+	PINCTRL_PIN(19, "PLGPIO19"),	\
+	PINCTRL_PIN(20, "PLGPIO20"),	\
+	PINCTRL_PIN(21, "PLGPIO21"),	\
+	PINCTRL_PIN(22, "PLGPIO22"),	\
+	PINCTRL_PIN(23, "PLGPIO23"),	\
+	PINCTRL_PIN(24, "PLGPIO24"),	\
+	PINCTRL_PIN(25, "PLGPIO25"),	\
+	PINCTRL_PIN(26, "PLGPIO26"),	\
+	PINCTRL_PIN(27, "PLGPIO27"),	\
+	PINCTRL_PIN(28, "PLGPIO28"),	\
+	PINCTRL_PIN(29, "PLGPIO29"),	\
+	PINCTRL_PIN(30, "PLGPIO30"),	\
+	PINCTRL_PIN(31, "PLGPIO31"),	\
+	PINCTRL_PIN(32, "PLGPIO32"),	\
+	PINCTRL_PIN(33, "PLGPIO33"),	\
+	PINCTRL_PIN(34, "PLGPIO34"),	\
+	PINCTRL_PIN(35, "PLGPIO35"),	\
+	PINCTRL_PIN(36, "PLGPIO36"),	\
+	PINCTRL_PIN(37, "PLGPIO37"),	\
+	PINCTRL_PIN(38, "PLGPIO38"),	\
+	PINCTRL_PIN(39, "PLGPIO39"),	\
+	PINCTRL_PIN(40, "PLGPIO40"),	\
+	PINCTRL_PIN(41, "PLGPIO41"),	\
+	PINCTRL_PIN(42, "PLGPIO42"),	\
+	PINCTRL_PIN(43, "PLGPIO43"),	\
+	PINCTRL_PIN(44, "PLGPIO44"),	\
+	PINCTRL_PIN(45, "PLGPIO45"),	\
+	PINCTRL_PIN(46, "PLGPIO46"),	\
+	PINCTRL_PIN(47, "PLGPIO47"),	\
+	PINCTRL_PIN(48, "PLGPIO48"),	\
+	PINCTRL_PIN(49, "PLGPIO49"),	\
+	PINCTRL_PIN(50, "PLGPIO50"),	\
+	PINCTRL_PIN(51, "PLGPIO51"),	\
+	PINCTRL_PIN(52, "PLGPIO52"),	\
+	PINCTRL_PIN(53, "PLGPIO53"),	\
+	PINCTRL_PIN(54, "PLGPIO54"),	\
+	PINCTRL_PIN(55, "PLGPIO55"),	\
+	PINCTRL_PIN(56, "PLGPIO56"),	\
+	PINCTRL_PIN(57, "PLGPIO57"),	\
+	PINCTRL_PIN(58, "PLGPIO58"),	\
+	PINCTRL_PIN(59, "PLGPIO59"),	\
+	PINCTRL_PIN(60, "PLGPIO60"),	\
+	PINCTRL_PIN(61, "PLGPIO61"),	\
+	PINCTRL_PIN(62, "PLGPIO62"),	\
+	PINCTRL_PIN(63, "PLGPIO63"),	\
+	PINCTRL_PIN(64, "PLGPIO64"),	\
+	PINCTRL_PIN(65, "PLGPIO65"),	\
+	PINCTRL_PIN(66, "PLGPIO66"),	\
+	PINCTRL_PIN(67, "PLGPIO67"),	\
+	PINCTRL_PIN(68, "PLGPIO68"),	\
+	PINCTRL_PIN(69, "PLGPIO69"),	\
+	PINCTRL_PIN(70, "PLGPIO70"),	\
+	PINCTRL_PIN(71, "PLGPIO71"),	\
+	PINCTRL_PIN(72, "PLGPIO72"),	\
+	PINCTRL_PIN(73, "PLGPIO73"),	\
+	PINCTRL_PIN(74, "PLGPIO74"),	\
+	PINCTRL_PIN(75, "PLGPIO75"),	\
+	PINCTRL_PIN(76, "PLGPIO76"),	\
+	PINCTRL_PIN(77, "PLGPIO77"),	\
+	PINCTRL_PIN(78, "PLGPIO78"),	\
+	PINCTRL_PIN(79, "PLGPIO79"),	\
+	PINCTRL_PIN(80, "PLGPIO80"),	\
+	PINCTRL_PIN(81, "PLGPIO81"),	\
+	PINCTRL_PIN(82, "PLGPIO82"),	\
+	PINCTRL_PIN(83, "PLGPIO83"),	\
+	PINCTRL_PIN(84, "PLGPIO84"),	\
+	PINCTRL_PIN(85, "PLGPIO85"),	\
+	PINCTRL_PIN(86, "PLGPIO86"),	\
+	PINCTRL_PIN(87, "PLGPIO87"),	\
+	PINCTRL_PIN(88, "PLGPIO88"),	\
+	PINCTRL_PIN(89, "PLGPIO89"),	\
+	PINCTRL_PIN(90, "PLGPIO90"),	\
+	PINCTRL_PIN(91, "PLGPIO91"),	\
+	PINCTRL_PIN(92, "PLGPIO92"),	\
+	PINCTRL_PIN(93, "PLGPIO93"),	\
+	PINCTRL_PIN(94, "PLGPIO94"),	\
+	PINCTRL_PIN(95, "PLGPIO95"),	\
+	PINCTRL_PIN(96, "PLGPIO96"),	\
+	PINCTRL_PIN(97, "PLGPIO97"),	\
+	PINCTRL_PIN(98, "PLGPIO98"),	\
+	PINCTRL_PIN(99, "PLGPIO99"),	\
+	PINCTRL_PIN(100, "PLGPIO100"),	\
+	PINCTRL_PIN(101, "PLGPIO101")
+
 #endif /* __PINMUX_SPEAR_H__ */
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c
index 832049a..91c883b 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.c
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c
@@ -15,108 +15,7 @@
 
 /* pins */
 static const struct pinctrl_pin_desc spear3xx_pins[] = {
-	PINCTRL_PIN(0, "PLGPIO0"),
-	PINCTRL_PIN(1, "PLGPIO1"),
-	PINCTRL_PIN(2, "PLGPIO2"),
-	PINCTRL_PIN(3, "PLGPIO3"),
-	PINCTRL_PIN(4, "PLGPIO4"),
-	PINCTRL_PIN(5, "PLGPIO5"),
-	PINCTRL_PIN(6, "PLGPIO6"),
-	PINCTRL_PIN(7, "PLGPIO7"),
-	PINCTRL_PIN(8, "PLGPIO8"),
-	PINCTRL_PIN(9, "PLGPIO9"),
-	PINCTRL_PIN(10, "PLGPIO10"),
-	PINCTRL_PIN(11, "PLGPIO11"),
-	PINCTRL_PIN(12, "PLGPIO12"),
-	PINCTRL_PIN(13, "PLGPIO13"),
-	PINCTRL_PIN(14, "PLGPIO14"),
-	PINCTRL_PIN(15, "PLGPIO15"),
-	PINCTRL_PIN(16, "PLGPIO16"),
-	PINCTRL_PIN(17, "PLGPIO17"),
-	PINCTRL_PIN(18, "PLGPIO18"),
-	PINCTRL_PIN(19, "PLGPIO19"),
-	PINCTRL_PIN(20, "PLGPIO20"),
-	PINCTRL_PIN(21, "PLGPIO21"),
-	PINCTRL_PIN(22, "PLGPIO22"),
-	PINCTRL_PIN(23, "PLGPIO23"),
-	PINCTRL_PIN(24, "PLGPIO24"),
-	PINCTRL_PIN(25, "PLGPIO25"),
-	PINCTRL_PIN(26, "PLGPIO26"),
-	PINCTRL_PIN(27, "PLGPIO27"),
-	PINCTRL_PIN(28, "PLGPIO28"),
-	PINCTRL_PIN(29, "PLGPIO29"),
-	PINCTRL_PIN(30, "PLGPIO30"),
-	PINCTRL_PIN(31, "PLGPIO31"),
-	PINCTRL_PIN(32, "PLGPIO32"),
-	PINCTRL_PIN(33, "PLGPIO33"),
-	PINCTRL_PIN(34, "PLGPIO34"),
-	PINCTRL_PIN(35, "PLGPIO35"),
-	PINCTRL_PIN(36, "PLGPIO36"),
-	PINCTRL_PIN(37, "PLGPIO37"),
-	PINCTRL_PIN(38, "PLGPIO38"),
-	PINCTRL_PIN(39, "PLGPIO39"),
-	PINCTRL_PIN(40, "PLGPIO40"),
-	PINCTRL_PIN(41, "PLGPIO41"),
-	PINCTRL_PIN(42, "PLGPIO42"),
-	PINCTRL_PIN(43, "PLGPIO43"),
-	PINCTRL_PIN(44, "PLGPIO44"),
-	PINCTRL_PIN(45, "PLGPIO45"),
-	PINCTRL_PIN(46, "PLGPIO46"),
-	PINCTRL_PIN(47, "PLGPIO47"),
-	PINCTRL_PIN(48, "PLGPIO48"),
-	PINCTRL_PIN(49, "PLGPIO49"),
-	PINCTRL_PIN(50, "PLGPIO50"),
-	PINCTRL_PIN(51, "PLGPIO51"),
-	PINCTRL_PIN(52, "PLGPIO52"),
-	PINCTRL_PIN(53, "PLGPIO53"),
-	PINCTRL_PIN(54, "PLGPIO54"),
-	PINCTRL_PIN(55, "PLGPIO55"),
-	PINCTRL_PIN(56, "PLGPIO56"),
-	PINCTRL_PIN(57, "PLGPIO57"),
-	PINCTRL_PIN(58, "PLGPIO58"),
-	PINCTRL_PIN(59, "PLGPIO59"),
-	PINCTRL_PIN(60, "PLGPIO60"),
-	PINCTRL_PIN(61, "PLGPIO61"),
-	PINCTRL_PIN(62, "PLGPIO62"),
-	PINCTRL_PIN(63, "PLGPIO63"),
-	PINCTRL_PIN(64, "PLGPIO64"),
-	PINCTRL_PIN(65, "PLGPIO65"),
-	PINCTRL_PIN(66, "PLGPIO66"),
-	PINCTRL_PIN(67, "PLGPIO67"),
-	PINCTRL_PIN(68, "PLGPIO68"),
-	PINCTRL_PIN(69, "PLGPIO69"),
-	PINCTRL_PIN(70, "PLGPIO70"),
-	PINCTRL_PIN(71, "PLGPIO71"),
-	PINCTRL_PIN(72, "PLGPIO72"),
-	PINCTRL_PIN(73, "PLGPIO73"),
-	PINCTRL_PIN(74, "PLGPIO74"),
-	PINCTRL_PIN(75, "PLGPIO75"),
-	PINCTRL_PIN(76, "PLGPIO76"),
-	PINCTRL_PIN(77, "PLGPIO77"),
-	PINCTRL_PIN(78, "PLGPIO78"),
-	PINCTRL_PIN(79, "PLGPIO79"),
-	PINCTRL_PIN(80, "PLGPIO80"),
-	PINCTRL_PIN(81, "PLGPIO81"),
-	PINCTRL_PIN(82, "PLGPIO82"),
-	PINCTRL_PIN(83, "PLGPIO83"),
-	PINCTRL_PIN(84, "PLGPIO84"),
-	PINCTRL_PIN(85, "PLGPIO85"),
-	PINCTRL_PIN(86, "PLGPIO86"),
-	PINCTRL_PIN(87, "PLGPIO87"),
-	PINCTRL_PIN(88, "PLGPIO88"),
-	PINCTRL_PIN(89, "PLGPIO89"),
-	PINCTRL_PIN(90, "PLGPIO90"),
-	PINCTRL_PIN(91, "PLGPIO91"),
-	PINCTRL_PIN(92, "PLGPIO92"),
-	PINCTRL_PIN(93, "PLGPIO93"),
-	PINCTRL_PIN(94, "PLGPIO94"),
-	PINCTRL_PIN(95, "PLGPIO95"),
-	PINCTRL_PIN(96, "PLGPIO96"),
-	PINCTRL_PIN(97, "PLGPIO97"),
-	PINCTRL_PIN(98, "PLGPIO98"),
-	PINCTRL_PIN(99, "PLGPIO99"),
-	PINCTRL_PIN(100, "PLGPIO100"),
-	PINCTRL_PIN(101, "PLGPIO101"),
+	SPEAR_PIN_0_TO_101,
 };
 
 /* firda_pins */
-- 
1.7.9

[PATCH 6/9] SPEAr13xx: Add dts and dtsi files

[Viresh Kumar]

This patch adds machines/boards dts{i} files for SPEAr1310 and SPEAr1340. Both
are based on ARM, Cortex A9 processor family.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 arch/arm/boot/dts/spear1310-evb.dts |  267 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/spear1310.dtsi    |  184 ++++++++++++++++++++++
 arch/arm/boot/dts/spear1340-evb.dts |  291 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/spear1340.dtsi    |   56 +++++++
 arch/arm/boot/dts/spear13xx.dtsi    |  258 +++++++++++++++++++++++++++++++
 5 files changed, 1056 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/spear1310-evb.dts
 create mode 100644 arch/arm/boot/dts/spear1310.dtsi
 create mode 100644 arch/arm/boot/dts/spear1340-evb.dts
 create mode 100644 arch/arm/boot/dts/spear1340.dtsi
 create mode 100644 arch/arm/boot/dts/spear13xx.dtsi

diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
new file mode 100644
index 0000000..1ffc46c
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -0,0 +1,267 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux at e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				pci {
+					st,pins = "pcie0_grp","pcie1_grp",
+						"pcie2_grp";
+					st,function = "pci";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+			};
+		};
+
+		ahci at b1000000 {
+			status = "okay";
+		};
+
+		cf at b2800000 {
+			status = "okay";
+		};
+
+		dma at ea800000 {
+			status = "okay";
+		};
+
+		dma at eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash at b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth at e2000000 {
+			status = "okay";
+		};
+
+		sdhci at b3000000 {
+			status = "okay";
+		};
+
+		smi: flash at ea000000 {
+			status = "okay";
+		};
+
+		spi0: spi at e0100000 {
+			status = "okay";
+		};
+
+		ehci at e4800000 {
+			status = "okay";
+		};
+
+		ehci at e5800000 {
+			status = "okay";
+		};
+
+		ohci at e4000000 {
+			status = "okay";
+		};
+
+		ohci at e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc at e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio at e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio at e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c at e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c at 5cd00000 {
+			       status = "okay";
+			};
+
+			kbd at e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc at e0580000 {
+			       status = "okay";
+			};
+
+			serial at e0000000 {
+			       status = "okay";
+			};
+
+			wdt at ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
new file mode 100644
index 0000000..9e61da4
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -0,0 +1,184 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		ahci at b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			status = "disabled";
+		};
+
+		ahci at b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			status = "disabled";
+		};
+
+		ahci at b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			status = "disabled";
+		};
+
+		gmac1: eth at 5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac2: eth at 5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac3: eth at 5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac4: eth at 5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		spi1: spi at 5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c at 5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c at 5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c at 5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c at 5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c at 5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c at 5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c at 5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			serial at 5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial at 5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial at 5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial at 5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial at 5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal at e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
new file mode 100644
index 0000000..5621df3
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -0,0 +1,291 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux at e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				kbd {
+					st,pins = "keyboard_row_col_grp",
+						"keyboard_col5_grp";
+					st,function = "keyboard";
+				};
+				uart0 {
+					st,pins = "uart0_grp", "uart0_enh_grp";
+					st,function = "uart0";
+				};
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1-pmx {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp",
+						"ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				pwm {
+					st,pins = "pwm2_grp", "pwm3_grp";
+					st,function = "pwm";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+			};
+		};
+
+		ahci at b1000000 {
+			status = "okay";
+		};
+
+		cf at b2800000 {
+			status = "okay";
+		};
+
+		dma at ea800000 {
+			status = "okay";
+		};
+
+		dma at eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash at b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth at e2000000 {
+			status = "okay";
+		};
+
+		sdhci at b3000000 {
+			status = "okay";
+		};
+
+		smi: flash at ea000000 {
+			status = "okay";
+		};
+
+		spi0: spi at e0100000 {
+			status = "okay";
+		};
+
+		ehci at e4800000 {
+			status = "okay";
+		};
+
+		ehci at e5800000 {
+			status = "okay";
+		};
+
+		ohci at e4000000 {
+			status = "okay";
+		};
+
+		ohci at e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc at e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio at e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio at e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c at e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c at b4000000 {
+			       status = "okay";
+			};
+
+			kbd at e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc at e0580000 {
+			       status = "okay";
+			};
+
+			serial at e0000000 {
+			       status = "okay";
+			};
+
+			serial at b4100000 {
+			       status = "okay";
+			};
+
+			wdt at ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 0000000..a26fc47
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,56 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+		ahci at b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi at 5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c at b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				status = "disabled";
+			};
+
+			serial at b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+			};
+
+			thermal at e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
new file mode 100644
index 0000000..a9d1872
--- /dev/null
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -0,0 +1,258 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu at 1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller at ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 8 0x04
+			      0 9 0x04>;
+	};
+
+	L2: l2-cache {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci at b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf at b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x100>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+		};
+
+		dma at ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+
+		dma at eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+
+		fsmc: flash at b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register */
+			       0xb0800000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		gmac0: eth at e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 23 0x4
+				      0 24 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash at ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		spi0: spi at e0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xe0100000 0x1000>;
+			interrupts = <0 31 0x4>;
+			status = "disabled";
+		};
+
+		ehci at e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			status = "disabled";
+		};
+
+		ehci at e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			status = "disabled";
+		};
+
+		ohci at e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			status = "disabled";
+		};
+
+		ohci at e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			gpio0: gpio at e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio at e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd at e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				interrupts = <0 52 0x4>;
+				status = "disabled";
+			};
+
+			i2c0: i2c at e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			rtc at e0580000 {
+				compatible = "st,spear-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial at e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			adc at e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 44 0x4>;
+				status = "disabled";
+			};
+
+			timer at ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800620 0x20>;
+				interrupts = <1 13 0x301>;
+			};
+
+			wdt at ec800620 {
+				compatible = "arm,mpcore-wdt";
+				reg = <0xec800620 0x1000>;
+				interrupts = <1 14 0x301>;
+				status = "disabled";
+			};
+
+			thermal at e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+			};
+		};
+	};
+};
-- 
1.7.9

[PATCH 7/9] SPEAr13xx: Add compilation support

[Viresh Kumar]

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 arch/arm/Makefile            |    2 ++
 arch/arm/plat-spear/Kconfig  |   12 ++++++++++++
 arch/arm/plat-spear/Makefile |    5 +++--
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a0c40a0..68d61ad 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -190,6 +190,8 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_VT8500)		:= vt8500
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
+machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
 machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 387655b..4404f82 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -8,6 +8,17 @@ choice
 	prompt "ST SPEAr Family"
 	default ARCH_SPEAR3XX
 
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx with Device Tree"
+	select ARM_GIC
+	select CPU_V7
+	select USE_OF
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	help
+	  Supports for ARM's SPEAR13XX family
+
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
@@ -27,6 +38,7 @@ config ARCH_SPEAR6XX
 endchoice
 
 # Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear13xx/Kconfig"
 source "arch/arm/mach-spear3xx/Kconfig"
 source "arch/arm/mach-spear6xx/Kconfig"
 
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index 38f1235..2607bd0 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,7 @@
 #
 
 # Common support
-obj-y	:= restart.o time.o pl080.o
+obj-y	:= restart.o time.o
 
-obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o shirq.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o
-- 
1.7.9

[PATCH 8/9] SPEAr13xx: Add defconfig

[Viresh Kumar]

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 arch/arm/configs/spear13xx_defconfig |   91 ++++++++++++++++++++++++++++++++++
 1 files changed, 91 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/configs/spear13xx_defconfig

diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
new file mode 100644
index 0000000..587d1f3
--- /dev/null
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -0,0 +1,91 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_PATA_ARASAN_CF=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MPCORE_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_DMATEST=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
-- 
1.7.9

[PATCH 9/9] SPEAr: Update MAINTAINERS and Documentation

[Viresh Kumar]

This patchset updates MAINTAINERS files, makes shiraz as second Maintainer for
SPEAr SoCs.

It also updates Documentation mostly for SPEAr13xx.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 Documentation/arm/SPEAr/overview.txt            |   32 ++++++++++++----------
 Documentation/devicetree/bindings/arm/spear.txt |   14 +++++-----
 MAINTAINERS                                     |   13 +++++++++
 3 files changed, 37 insertions(+), 22 deletions(-)

diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 28a9af9..57aae77 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -8,9 +8,8 @@ Introduction
   weblink : http://www.st.com/spear
 
   The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
-  supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
-  SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
-  series is in progress.
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
+  SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
 
   Hierarchy in SPEAr is as follows:
 
@@ -26,33 +25,36 @@ Introduction
 		- SPEAr600 (SOC)
 			- SPEAr600 Evaluation Board
 	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
-		- SPEAr1300 (SOC)
+		- SPEAr1310 (SOC)
+			- SPEAr1310 Evaluation Board
+		- SPEAr1340 (SOC)
+			- SPEAr1340 Evaluation Board
 
   Configuration
   -------------
 
   A generic configuration is provided for each machine, and can be used as the
   default by
-	make spear600_defconfig
-	make spear300_defconfig
-	make spear310_defconfig
-	make spear320_defconfig
+	make spear13xx_defconfig
+	make spear3xx_defconfig
+	make spear6xx_defconfig
 
   Layout
   ------
 
-  The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
-  SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+  The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
+  SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
   with headers in plat/.
 
   Each machine series have a directory with name arch/arm/mach-spear followed by
   series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
 
-  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
-  spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
-  specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
-  mach-spear* doesn't contains board specific files as they fully support
-  Flattened Device Tree.
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
+  spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
+  mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
+  files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
+  spear600.c.  mach-spear* doesn't contains board specific files as they fully
+  support Flattened Device Tree.
 
 
   Document Author
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index aa5f355..0d42949 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings
 ---------------------------------------
 
 Boards with the ST SPEAr600 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear600";
 
 Boards with the ST SPEAr300 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear300";
 
 Boards with the ST SPEAr310 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear310";
 
 Boards with the ST SPEAr320 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear320";
 
+Boards with the ST SPEAr1310 SoC shall have the following properties:
 Required root node property:
+compatible = "st,spear1310";
 
-compatible = "st,spear320";
+Boards with the ST SPEAr1340 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1340";
diff --git a/MAINTAINERS b/MAINTAINERS
index 618d4fd..103d20a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6285,14 +6285,25 @@ F:	include/linux/compiler.h
 
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel at list.st.com
 L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/plat-spear/
 
+SPEAR13XX MACHINE SUPPORT
+M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
+L:	spear-devel at list.st.com
+L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+W:	http://www.st.com/spear
+S:	Maintained
+F:	arch/arm/mach-spear13xx/
+
 SPEAR3XX MACHINE SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel at list.st.com
 L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -6301,6 +6312,8 @@ F:	arch/arm/mach-spear3xx/
 
 SPEAR6XX MACHINE SUPPORT
 M:	Rajeev Kumar <rajeev-dlh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
+M:	Viresh Kumar <viresh.kumar@st.com>
 L:	spear-devel at list.st.com
 L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
-- 
1.7.9

[PATCH 0/9] Add support for SPEAr13xx SoCs

[Arnd Bergmann]

On Friday 20 April 2012, Viresh Kumar wrote:
> Sorry for yet another patchset for you :(
> 
> This one adds in support for SPEAr1310 and SPEAr1340. It supports:
> - DT probing
> - pinctrl drivers
> - common clock framework
> 
> All you requested to get this upstream. :)
> 
> I have CC-ed Linus and Mike for their patches and would ask them for their Acks,
> as this would evantually make through your ARM-SoC tree.
> 
> Few devices/drivers mentioned in dts files have their DT probing patches under
> review.

I've looked at all the platform specific bits and they look pretty good,
great work! I have ignored the pinctrl and clock drivers and hope that the
respective maintainers will be able to judge them well.

There are a few places where you still hardcode stuff that could be turned
into device tree properties, but those are corner cases and you have an
existing platform here that you've done a great amount of excellent cleanups
to in the last weeks, so my feeling is that all the platform code can go in
when you take care of the stuff that I've commented on, most of those things
should be simple.

	Arnd

[PATCH 0/9] Add support for SPEAr13xx SoCs

[viresh kumar]

On 4/20/12, Arnd Bergmann <arnd@arndb.de> wrote:
> I've looked at all the platform specific bits and they look pretty good,
> great work! I have ignored the pinctrl and clock drivers and hope that the
> respective maintainers will be able to judge them well.
>
> There are a few places where you still hardcode stuff that could be turned
> into device tree properties, but those are corner cases and you have an
> existing platform here that you've done a great amount of excellent cleanups
> to in the last weeks, so my feeling is that all the platform code can go in
> when you take care of the stuff that I've commented on, most of those things
> should be simple.

Have fixed most of stuff you pointed to. Check V2.

--
viresh

[PATCH 0/9] Add support for SPEAr13xx SoCs

[Arnd Bergmann]

On Saturday 21 April 2012, viresh kumar wrote:
> On 4/20/12, Arnd Bergmann <arnd@arndb.de> wrote:
> > I've looked at all the platform specific bits and they look pretty good,
> > great work! I have ignored the pinctrl and clock drivers and hope that the
> > respective maintainers will be able to judge them well.
> >
> > There are a few places where you still hardcode stuff that could be turned
> > into device tree properties, but those are corner cases and you have an
> > existing platform here that you've done a great amount of excellent cleanups
> > to in the last weeks, so my feeling is that all the platform code can go in
> > when you take care of the stuff that I've commented on, most of those things
> > should be simple.
> 
> Have fixed most of stuff you pointed to. Check V2.
> 

Wow, that was fast ;-)

Can you comment on the ones you did not address? In particular,
I'd like to understand why you put the SPEAR1310_RAS_CTRL*
register definitions into a globally visible header file.

	Arnd

[PATCH 0/9] Add support for SPEAr13xx SoCs

[viresh kumar]

On 4/21/12, Arnd Bergmann <arnd@arndb.de> wrote:
> On Saturday 21 April 2012, viresh kumar wrote:
>> On 4/20/12, Arnd Bergmann <arnd@arndb.de> wrote:
>> > I've looked at all the platform specific bits and they look pretty
>> > good,
>> > great work! I have ignored the pinctrl and clock drivers and hope that
>> > the
>> > respective maintainers will be able to judge them well.
>> >
>> > There are a few places where you still hardcode stuff that could be
>> > turned
>> > into device tree properties, but those are corner cases and you have an
>> > existing platform here that you've done a great amount of excellent
>> > cleanups
>> > to in the last weeks, so my feeling is that all the platform code can go
>> > in
>> > when you take care of the stuff that I've commented on, most of those
>> > things
>> > should be simple.
>>
>> Have fixed most of stuff you pointed to. Check V2.
>>
>
> Wow, that was fast ;-)

Actually i should say it now:

Wow, that was too fast ;-)

> Can you comment on the ones you did not address? In particular,
> I'd like to understand why you put the SPEAR1310_RAS_CTRL*
> register definitions into a globally visible header file.

I was replying to that mail only when you wrote this. Can check my
reply there.

--
viresh