From: Viresh Kumar <viresh.kumar@linaro.org> To: rjw@sisk.pl, swarren@nvidia.com Cc: linaro-kernel@lists.linaro.org, patches@linaro.org, cpufreq@vger.kernel.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, mturquette@linaro.org, linux-arm-kernel@lists.infradead.org, Viresh Kumar <viresh.kumar@linaro.org> Subject: [PATCH 2/6] ARM: Tegra: Add CPU's OPPs for using cpufreq-cpu0 driver Date: Wed, 7 Aug 2013 20:16:44 +0530 [thread overview] Message-ID: <d4cd498d9b63d761039b025216e65278dc8e0e37.1375886595.git.viresh.kumar@linaro.org> (raw) In-Reply-To: <cover.1375886595.git.viresh.kumar@linaro.org> In-Reply-To: <cover.1375886595.git.viresh.kumar@linaro.org> cpufreq-cpu0 driver needs OPPs to be present in DT which can be probed by it to get frequency table. This patch adds OPPs and clock-latency to tegra cpu0 node for multiple SoCs. Voltage levels aren't used until now for tegra and so a flat value which would eventually be ignored is used to represent voltage. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/boot/dts/tegra114.dtsi | 12 ++++++++++++ arch/arm/boot/dts/tegra20.dtsi | 12 ++++++++++++ arch/arm/boot/dts/tegra30.dtsi | 12 ++++++++++++ 3 files changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index abf6c40..730e0d9 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -438,6 +438,18 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + operating-points = < + /* kHz ignored */ + 216000 1000000 + 312000 1000000 + 456000 1000000 + 608000 1000000 + 760000 1000000 + 816000 1000000 + 912000 1000000 + 1000000 1000000 + >; + clock-latency = <300000>; }; cpu@1 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9653fd8..5696f98 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -577,6 +577,18 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + operating-points = < + /* kHz ignored */ + 216000 1000000 + 312000 1000000 + 456000 1000000 + 608000 1000000 + 760000 1000000 + 816000 1000000 + 912000 1000000 + 1000000 1000000 + >; + clock-latency = <300000>; }; cpu@1 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d8783f0..5930290 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -569,6 +569,18 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + operating-points = < + /* kHz ignored */ + 216000 1000000 + 312000 1000000 + 456000 1000000 + 608000 1000000 + 760000 1000000 + 816000 1000000 + 912000 1000000 + 1000000 1000000 + >; + clock-latency = <300000>; }; cpu@1 { -- 1.7.12.rc2.18.g61b472e
WARNING: multiple messages have this Message-ID (diff)
From: viresh.kumar@linaro.org (Viresh Kumar) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/6] ARM: Tegra: Add CPU's OPPs for using cpufreq-cpu0 driver Date: Wed, 7 Aug 2013 20:16:44 +0530 [thread overview] Message-ID: <d4cd498d9b63d761039b025216e65278dc8e0e37.1375886595.git.viresh.kumar@linaro.org> (raw) In-Reply-To: <cover.1375886595.git.viresh.kumar@linaro.org> cpufreq-cpu0 driver needs OPPs to be present in DT which can be probed by it to get frequency table. This patch adds OPPs and clock-latency to tegra cpu0 node for multiple SoCs. Voltage levels aren't used until now for tegra and so a flat value which would eventually be ignored is used to represent voltage. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/boot/dts/tegra114.dtsi | 12 ++++++++++++ arch/arm/boot/dts/tegra20.dtsi | 12 ++++++++++++ arch/arm/boot/dts/tegra30.dtsi | 12 ++++++++++++ 3 files changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index abf6c40..730e0d9 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -438,6 +438,18 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + operating-points = < + /* kHz ignored */ + 216000 1000000 + 312000 1000000 + 456000 1000000 + 608000 1000000 + 760000 1000000 + 816000 1000000 + 912000 1000000 + 1000000 1000000 + >; + clock-latency = <300000>; }; cpu at 1 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9653fd8..5696f98 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -577,6 +577,18 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + operating-points = < + /* kHz ignored */ + 216000 1000000 + 312000 1000000 + 456000 1000000 + 608000 1000000 + 760000 1000000 + 816000 1000000 + 912000 1000000 + 1000000 1000000 + >; + clock-latency = <300000>; }; cpu at 1 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d8783f0..5930290 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -569,6 +569,18 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + operating-points = < + /* kHz ignored */ + 216000 1000000 + 312000 1000000 + 456000 1000000 + 608000 1000000 + 760000 1000000 + 816000 1000000 + 912000 1000000 + 1000000 1000000 + >; + clock-latency = <300000>; }; cpu at 1 { -- 1.7.12.rc2.18.g61b472e
next prev parent reply other threads:[~2013-08-07 14:47 UTC|newest] Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-08-07 14:46 [PATCH 0/6] Tegra: Use cpufreq-cpu0 driver Viresh Kumar 2013-08-07 14:46 ` Viresh Kumar 2013-08-07 14:46 ` [PATCH 1/6] clk: Tegra: Add CPU0 clock driver Viresh Kumar 2013-08-07 14:46 ` Viresh Kumar 2013-08-07 16:44 ` Mike Turquette 2013-08-07 16:44 ` Mike Turquette 2013-08-07 16:44 ` Mike Turquette 2013-08-07 17:38 ` Stephen Warren 2013-08-07 17:38 ` Stephen Warren 2013-08-07 17:45 ` Viresh Kumar 2013-08-07 17:45 ` Viresh Kumar 2013-08-07 17:48 ` Stephen Warren 2013-08-07 17:48 ` Stephen Warren 2013-08-07 17:54 ` Viresh Kumar 2013-08-07 17:54 ` Viresh Kumar 2013-08-07 18:50 ` Stephen Warren 2013-08-07 18:50 ` Stephen Warren 2013-08-08 2:42 ` Viresh Kumar 2013-08-08 2:42 ` Viresh Kumar 2013-08-08 18:50 ` Stephen Warren 2013-08-08 18:50 ` Stephen Warren 2013-08-09 3:19 ` Viresh Kumar 2013-08-09 3:19 ` Viresh Kumar 2013-08-07 14:46 ` Viresh Kumar [this message] 2013-08-07 14:46 ` [PATCH 2/6] ARM: Tegra: Add CPU's OPPs for using cpufreq-cpu0 driver Viresh Kumar 2013-08-07 17:42 ` Stephen Warren 2013-08-07 17:42 ` Stephen Warren 2013-08-07 18:06 ` Viresh Kumar 2013-08-07 18:06 ` Viresh Kumar 2013-08-07 18:55 ` Stephen Warren 2013-08-07 18:55 ` Stephen Warren 2013-08-08 2:57 ` Viresh Kumar 2013-08-08 2:57 ` Viresh Kumar 2013-08-08 18:55 ` Stephen Warren 2013-08-08 18:55 ` Stephen Warren 2013-08-08 13:58 ` Lucas Stach 2013-08-08 13:58 ` Lucas Stach 2013-08-08 13:58 ` Lucas Stach 2013-08-08 14:11 ` Viresh Kumar 2013-08-08 14:11 ` Viresh Kumar 2013-08-08 14:22 ` Lucas Stach 2013-08-08 14:22 ` Lucas Stach 2013-08-08 14:37 ` Viresh Kumar 2013-08-08 14:37 ` Viresh Kumar 2013-08-08 15:52 ` Nishanth Menon 2013-08-08 15:52 ` Nishanth Menon 2013-08-08 15:52 ` Nishanth Menon 2013-08-07 14:46 ` [PATCH 3/6] ARM: Tegra: Enable OPP library Viresh Kumar 2013-08-07 14:46 ` Viresh Kumar 2013-08-07 17:43 ` Stephen Warren 2013-08-07 17:43 ` Stephen Warren 2013-08-07 18:08 ` Viresh Kumar 2013-08-07 18:08 ` Viresh Kumar 2013-08-07 14:46 ` [PATCH 4/6] ARM: Tegra: defconfig: select cpufreq-cpu0 driver Viresh Kumar 2013-08-07 14:46 ` Viresh Kumar 2013-08-07 14:46 ` [PATCH 5/6] ARM: Tegra: start using " Viresh Kumar 2013-08-07 14:46 ` Viresh Kumar 2013-08-07 17:46 ` Stephen Warren 2013-08-07 17:46 ` Stephen Warren 2013-08-07 17:49 ` Viresh Kumar 2013-08-07 17:49 ` Viresh Kumar 2013-08-07 17:53 ` Stephen Warren 2013-08-07 17:53 ` Stephen Warren 2013-08-07 17:59 ` Viresh Kumar 2013-08-07 17:59 ` Viresh Kumar 2013-08-07 18:51 ` Stephen Warren 2013-08-07 18:51 ` Stephen Warren 2013-08-08 2:48 ` Viresh Kumar 2013-08-08 2:48 ` Viresh Kumar 2013-08-07 14:46 ` [PATCH 6/6] cpufreq: Tegra: Remove tegra-cpufreq driver Viresh Kumar 2013-08-07 14:46 ` Viresh Kumar 2013-08-08 8:31 ` [PATCH 0/6] Tegra: Use cpufreq-cpu0 driver Richard Zhao 2013-08-08 8:31 ` Richard Zhao 2013-08-08 8:33 ` Viresh Kumar 2013-08-08 8:33 ` Viresh Kumar
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=d4cd498d9b63d761039b025216e65278dc8e0e37.1375886595.git.viresh.kumar@linaro.org \ --to=viresh.kumar@linaro.org \ --cc=cpufreq@vger.kernel.org \ --cc=linaro-kernel@lists.linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=patches@linaro.org \ --cc=rjw@sisk.pl \ --cc=swarren@nvidia.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.