* [PATCH v5 0/2] hwmon: (adt7475) Added attenuator bypass support
@ 2020-01-23 22:05 Logan Shaw
2020-01-23 22:05 ` [PATCH v5 1/2] " Logan Shaw
2020-01-23 22:05 ` [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation Logan Shaw
0 siblings, 2 replies; 5+ messages in thread
From: Logan Shaw @ 2020-01-23 22:05 UTC (permalink / raw)
To: linux, jdelvare, robh+dt
Cc: linux-hwmon, linux-kernel, devicetree, Joshua.Scott,
Chris.Packham, logan.shaw
The ADT7473 and ADT7475 support bypassing voltage input attenuators on
voltage input 1 and the ADT7476 and ADT7490 additionally support
bypassing voltage input attenuators on voltage inputs 0, 3, and 4. This
can be useful to improve measurement resolution when measuring voltages
0 V - 2.25 V.
This patch adds 4 optional devicetree properties to the adt7475
driver, each setting the attenuator bypass (or clearing) on a
specific voltage input.
* v5
- modified adt7475.yaml to remove dt_binding_check errors
- made various alignment fixes to adt7475.c to improve style.
- renamed function modify_config_from_dts_prop to modify_config
- changed return type of function modify_config to void
- function modify_config error return code modified no longer override
the dependent functions i2c_smbus_write_byte_data error.
- renamed function load_all_bypass_attenuators to load_attenuators
- in function load_attenuators the two local variables config2_copy
and config4_copy have been combined into one: conf_copy.
* v4
- fixed a small error in file adt7475.yaml (duplicate property names).
* v3
- removed the functionality to set the global attenuator bypass.
- added functionality to allow bypassing voltage input 1 on the
ADT7473 and ADT7475.
- added DTS definition file adt7475.yaml and 4 new properties.
- added the previousely missing newline character to the end of
file adt7475.c.
* v2
- removed sysfs changes from patch
- removed adt7475_write macro from patch and replaced it by using
the i2c_smbus_write_byte_data function directly in code.
- removed config4_attenuate_index function from patch and replaced it
by modifying the function load_individual_bypass_attenuators
to use hard coded bit values.
- modified function load_individual_bypass_attenuators to use 4 if
statements, one for each voltage input, replacing the for loop.
- modified function adt7475_probe to check the device is a ADT7476 or
ADT7490 (other devices do not support bypassing all or
individual attenuators), and only then set the relevant bits.
- added new file adt7475.txt to document the new devicetree properties.
- removed c++ style comments.
Logan Shaw (2):
hwmon: (adt7475) Added attenuator bypass support
dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation
.../devicetree/bindings/hwmon/adt7475.yaml | 95 +++++++++++++++++++
drivers/hwmon/adt7475.c | 68 +++++++++++++
2 files changed, 163 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml
--
2.25.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v5 1/2] hwmon: (adt7475) Added attenuator bypass support
2020-01-23 22:05 [PATCH v5 0/2] hwmon: (adt7475) Added attenuator bypass support Logan Shaw
@ 2020-01-23 22:05 ` Logan Shaw
2020-01-24 4:55 ` Guenter Roeck
2020-01-23 22:05 ` [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation Logan Shaw
1 sibling, 1 reply; 5+ messages in thread
From: Logan Shaw @ 2020-01-23 22:05 UTC (permalink / raw)
To: linux, jdelvare, robh+dt
Cc: linux-hwmon, linux-kernel, devicetree, Joshua.Scott,
Chris.Packham, logan.shaw
Added support for reading DTS properties to set attenuators on
device probe for the ADT7473, ADT7475, ADT7476, and ADT7490.
Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
---
---
drivers/hwmon/adt7475.c | 68 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 6c64d50c9aae..8afc5a89ec92 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -19,6 +19,7 @@
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/jiffies.h>
+#include <linux/of.h>
#include <linux/util_macros.h>
/* Indexes for the sysfs hooks */
@@ -1457,6 +1458,70 @@ static int adt7475_update_limits(struct i2c_client *client)
return 0;
}
+/**
+ * Sets or clears the given bit in the config depending on the value of the
+ * given dts property. Non-zero value sets, zero value clears. No change if
+ * the property is absent.
+ */
+static void modify_config(const struct i2c_client *client, char *property,
+ u8 *config, u8 bit_index)
+{
+ u32 prop_value = 0;
+ int ret = of_property_read_u32(client->dev.of_node, property,
+ &prop_value);
+
+ if (!ret) {
+ if (prop_value)
+ *config |= (1 << bit_index);
+ else
+ *config &= ~(1 << bit_index);
+ }
+}
+
+/**
+ * Configures the attenuator bypasses for voltage inputs, depening on
+ * properties in the dts.
+.*
+ * The adt7473 and adt7475 only support bypassing in1.
+ *
+ * Returns a negative error code if there was an error writing to the register.
+ */
+static int load_attenuators(const struct i2c_client *client, int chip,
+ u8 *config2, u8 *config4)
+{
+ u8 conf_copy;
+ int ret = 0;
+
+ if (chip == adt7476 || chip == adt7490) {
+ conf_copy = *config4;
+
+ modify_config(client, "bypass-attenuator-in0", &conf_copy, 4);
+ modify_config(client, "bypass-attenuator-in1", &conf_copy, 5);
+ modify_config(client, "bypass-attenuator-in3", &conf_copy, 6);
+ modify_config(client, "bypass-attenuator-in4", &conf_copy, 7);
+
+ ret = i2c_smbus_write_byte_data(client, REG_CONFIG4,
+ conf_copy);
+ if (ret < 0)
+ return ret;
+
+ *config4 = conf_copy;
+ } else if (chip == adt7473 || chip == adt7475) {
+ conf_copy = *config2;
+
+ modify_config(client, "bypass-attenuator-in1", &conf_copy, 5);
+
+ ret = i2c_smbus_write_byte_data(client, REG_CONFIG2,
+ conf_copy);
+ if (ret < 0)
+ return ret;
+
+ *config2 = conf_copy;
+ }
+
+ return 0;
+}
+
static int adt7475_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1546,6 +1611,9 @@ static int adt7475_probe(struct i2c_client *client,
/* Voltage attenuators can be bypassed, globally or individually */
config2 = adt7475_read(REG_CONFIG2);
+ if (load_attenuators(client, chip, &config2, &(data->config4)) < 0)
+ dev_warn(&client->dev, "Error setting bypass attenuators\n");
+
if (config2 & CONFIG2_ATTN) {
data->bypass_attn = (0x3 << 3) | 0x3;
} else {
--
2.25.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation
2020-01-23 22:05 [PATCH v5 0/2] hwmon: (adt7475) Added attenuator bypass support Logan Shaw
2020-01-23 22:05 ` [PATCH v5 1/2] " Logan Shaw
@ 2020-01-23 22:05 ` Logan Shaw
2020-01-25 23:09 ` Guenter Roeck
1 sibling, 1 reply; 5+ messages in thread
From: Logan Shaw @ 2020-01-23 22:05 UTC (permalink / raw)
To: linux, jdelvare, robh+dt
Cc: linux-hwmon, linux-kernel, devicetree, Joshua.Scott,
Chris.Packham, logan.shaw
Added a new file documenting the adt7475 devicetree and added the four
new properties to it.
Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
---
---
.../devicetree/bindings/hwmon/adt7475.yaml | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
new file mode 100644
index 000000000000..450da5e66e07
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/adt7475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADT7475 hwmon sensor
+
+maintainers:
+ - Jean Delvare <jdelvare@suse.com>
+
+description: |
+ The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
+ PWN fan controllers.
+
+ They support monitoring and controlling up to four fans (the ADT7490 can only
+ control up to three). They support reading a single on chip temperature
+ sensor and two off chip temperature sensors (the ADT7490 additionally
+ supports measuring up to three current external temperature sensors with
+ series resistance cancellation (SRC)).
+
+ Datasheets:
+ https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
+ https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
+ https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
+ https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
+
+ Description taken from omsemiconductors specification sheets, with minor
+ rephrasing.
+
+properties:
+ compatible:
+ enum:
+ - adi,adt7473
+ - adi,adt7475
+ - adi,adt7476
+ - adi,adt7490
+
+ reg:
+ maxItems: 1
+
+ bypass-attenuator-in0:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in0. This is supported on the ADT7476 and ADT7490.
+ If set to a non-zero integer the attenuator is bypassed, if set to
+ zero the attenuator is not bypassed. If the property is absent then
+ the config register is not modified.
+ maxItems: 1
+
+ bypass-attenuator-in1:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in1. This is supported on the ADT7473, ADT7475,
+ ADT7476 and ADT7490. If set to a non-zero integer the attenuator
+ is bypassed, if set to zero the attenuator is not bypassed. If the
+ property is absent then the config register is not modified.
+ maxItems: 1
+
+ bypass-attenuator-in3:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in3. This is supported on the ADT7476 and ADT7490.
+ If set to a non-zero integer the attenuator is bypassed, if set to
+ zero the attenuator is not bypassed. If the property is absent then
+ the config register is not modified.
+ maxItems: 1
+
+ bypass-attenuator-in4:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in4. This is supported on the ADT7476 and ADT7490.
+ If set to a non-zero integer the attenuator is bypassed, if set to
+ zero the attenuator is not bypassed. If the property is absent then
+ the config register is not modified.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@2e {
+ compatible = "adi,adt7476";
+ reg = <0x2e>;
+ bypass-attenuator-in0 = <1>;
+ bypass-attenuator-in1 = <0>;
+ };
+ };
+...
--
2.25.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v5 1/2] hwmon: (adt7475) Added attenuator bypass support
2020-01-23 22:05 ` [PATCH v5 1/2] " Logan Shaw
@ 2020-01-24 4:55 ` Guenter Roeck
0 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2020-01-24 4:55 UTC (permalink / raw)
To: Logan Shaw, jdelvare, robh+dt
Cc: linux-hwmon, linux-kernel, devicetree, Joshua.Scott, Chris.Packham
On 1/23/20 2:05 PM, Logan Shaw wrote:
> Added support for reading DTS properties to set attenuators on
> device probe for the ADT7473, ADT7475, ADT7476, and ADT7490.
>
> Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> ---
> ---
> drivers/hwmon/adt7475.c | 68 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 6c64d50c9aae..8afc5a89ec92 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -19,6 +19,7 @@
> #include <linux/hwmon-vid.h>
> #include <linux/err.h>
> #include <linux/jiffies.h>
> +#include <linux/of.h>
> #include <linux/util_macros.h>
>
> /* Indexes for the sysfs hooks */
> @@ -1457,6 +1458,70 @@ static int adt7475_update_limits(struct i2c_client *client)
> return 0;
> }
>
> +/**
I am still at loss why you think it would make sense to mark those
comments for the kernel documentation. This doesn't have value outside
this driver.
> + * Sets or clears the given bit in the config depending on the value of the
> + * given dts property. Non-zero value sets, zero value clears. No change if
> + * the property is absent.
> + */
> +static void modify_config(const struct i2c_client *client, char *property,
> + u8 *config, u8 bit_index)
> +{
> + u32 prop_value = 0;
> + int ret = of_property_read_u32(client->dev.of_node, property,
> + &prop_value);
> +
> + if (!ret) {
> + if (prop_value)
> + *config |= (1 << bit_index);
> + else
> + *config &= ~(1 << bit_index);
> + }
> +}
> +
> +/**
> + * Configures the attenuator bypasses for voltage inputs, depening on
> + * properties in the dts.
> +.*
> + * The adt7473 and adt7475 only support bypassing in1.
> + *
> + * Returns a negative error code if there was an error writing to the register.
> + */
> +static int load_attenuators(const struct i2c_client *client, int chip,
> + u8 *config2, u8 *config4)
> +{
> + u8 conf_copy;
> + int ret = 0;
Unnecessary assignment.
> +
> + if (chip == adt7476 || chip == adt7490) {
> + conf_copy = *config4;
> +
> + modify_config(client, "bypass-attenuator-in0", &conf_copy, 4);
> + modify_config(client, "bypass-attenuator-in1", &conf_copy, 5);
> + modify_config(client, "bypass-attenuator-in3", &conf_copy, 6);
> + modify_config(client, "bypass-attenuator-in4", &conf_copy, 7);
> +
> + ret = i2c_smbus_write_byte_data(client, REG_CONFIG4,
> + conf_copy);
> + if (ret < 0)
> + return ret;
> +
> + *config4 = conf_copy;
> + } else if (chip == adt7473 || chip == adt7475) {
> + conf_copy = *config2;
> +
> + modify_config(client, "bypass-attenuator-in1", &conf_copy, 5);
> +
> + ret = i2c_smbus_write_byte_data(client, REG_CONFIG2,
> + conf_copy);
> + if (ret < 0)
> + return ret;
> +
> + *config2 = conf_copy;
> + }
> +
> + return 0;
> +}
> +
> static int adt7475_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -1546,6 +1611,9 @@ static int adt7475_probe(struct i2c_client *client,
>
> /* Voltage attenuators can be bypassed, globally or individually */
> config2 = adt7475_read(REG_CONFIG2);
> + if (load_attenuators(client, chip, &config2, &(data->config4)) < 0)
> + dev_warn(&client->dev, "Error setting bypass attenuators\n");
> +
> if (config2 & CONFIG2_ATTN) {
> data->bypass_attn = (0x3 << 3) | 0x3;
> } else {
>
CHECK: Alignment should match open parenthesis
#45: FILE: drivers/hwmon/adt7475.c:1467:
+static void modify_config(const struct i2c_client *client, char *property,
+ u8 *config, u8 bit_index)
CHECK: Alignment should match open parenthesis
#68: FILE: drivers/hwmon/adt7475.c:1490:
+static int load_attenuators(const struct i2c_client *client, int chip,
+ u8 *config2, u8 *config4)
CHECK: Alignment should match open parenthesis
#82: FILE: drivers/hwmon/adt7475.c:1504:
+ ret = i2c_smbus_write_byte_data(client, REG_CONFIG4,
+ conf_copy);
CHECK: Alignment should match open parenthesis
#93: FILE: drivers/hwmon/adt7475.c:1515:
+ ret = i2c_smbus_write_byte_data(client, REG_CONFIG2,
+ conf_copy);
CHECK: Unnecessary parentheses around data->config4
#110: FILE: drivers/hwmon/adt7475.c:1614:
+ if (load_attenuators(client, chip, &config2, &(data->config4)) < 0)
None of those is beneficial. Please fix.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation
2020-01-23 22:05 ` [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation Logan Shaw
@ 2020-01-25 23:09 ` Guenter Roeck
0 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2020-01-25 23:09 UTC (permalink / raw)
To: Logan Shaw
Cc: jdelvare, robh+dt, linux-hwmon, linux-kernel, devicetree,
Joshua.Scott, Chris.Packham
On Fri, Jan 24, 2020 at 11:05:33AM +1300, Logan Shaw wrote:
> Added a new file documenting the adt7475 devicetree and added the four
> new properties to it.
>
> Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Subject: s/doccumentation/documentation/
Guenter
> ---
> ---
> .../devicetree/bindings/hwmon/adt7475.yaml | 95 +++++++++++++++++++
> 1 file changed, 95 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> new file mode 100644
> index 000000000000..450da5e66e07
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/adt7475.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADT7475 hwmon sensor
> +
> +maintainers:
> + - Jean Delvare <jdelvare@suse.com>
> +
> +description: |
> + The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
> + PWN fan controllers.
> +
> + They support monitoring and controlling up to four fans (the ADT7490 can only
> + control up to three). They support reading a single on chip temperature
> + sensor and two off chip temperature sensors (the ADT7490 additionally
> + supports measuring up to three current external temperature sensors with
> + series resistance cancellation (SRC)).
> +
> + Datasheets:
> + https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
> + https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
> + https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
> + https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
> +
> + Description taken from omsemiconductors specification sheets, with minor
> + rephrasing.
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adt7473
> + - adi,adt7475
> + - adi,adt7476
> + - adi,adt7490
> +
> + reg:
> + maxItems: 1
> +
> + bypass-attenuator-in0:
> + description: |
> + Configures bypassing the individual voltage input
> + attenuator, on in0. This is supported on the ADT7476 and ADT7490.
> + If set to a non-zero integer the attenuator is bypassed, if set to
> + zero the attenuator is not bypassed. If the property is absent then
> + the config register is not modified.
> + maxItems: 1
> +
> + bypass-attenuator-in1:
> + description: |
> + Configures bypassing the individual voltage input
> + attenuator, on in1. This is supported on the ADT7473, ADT7475,
> + ADT7476 and ADT7490. If set to a non-zero integer the attenuator
> + is bypassed, if set to zero the attenuator is not bypassed. If the
> + property is absent then the config register is not modified.
> + maxItems: 1
> +
> + bypass-attenuator-in3:
> + description: |
> + Configures bypassing the individual voltage input
> + attenuator, on in3. This is supported on the ADT7476 and ADT7490.
> + If set to a non-zero integer the attenuator is bypassed, if set to
> + zero the attenuator is not bypassed. If the property is absent then
> + the config register is not modified.
> + maxItems: 1
> +
> + bypass-attenuator-in4:
> + description: |
> + Configures bypassing the individual voltage input
> + attenuator, on in4. This is supported on the ADT7476 and ADT7490.
> + If set to a non-zero integer the attenuator is bypassed, if set to
> + zero the attenuator is not bypassed. If the property is absent then
> + the config register is not modified.
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hwmon@2e {
> + compatible = "adi,adt7476";
> + reg = <0x2e>;
> + bypass-attenuator-in0 = <1>;
> + bypass-attenuator-in1 = <0>;
> + };
> + };
> +...
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-01-25 23:09 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-23 22:05 [PATCH v5 0/2] hwmon: (adt7475) Added attenuator bypass support Logan Shaw
2020-01-23 22:05 ` [PATCH v5 1/2] " Logan Shaw
2020-01-24 4:55 ` Guenter Roeck
2020-01-23 22:05 ` [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation Logan Shaw
2020-01-25 23:09 ` Guenter Roeck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.