* [U-Boot] [PATCH] i.mx6ul: xpress: update UART init for current board revision
@ 2017-10-02 19:32 Anatolij Gustschin
2017-10-03 7:56 ` Stefano Babic
2017-10-12 16:23 ` Stefano Babic
0 siblings, 2 replies; 3+ messages in thread
From: Anatolij Gustschin @ 2017-10-02 19:32 UTC (permalink / raw)
To: u-boot
UART pinmux has been changed on the last board revision. Change
board pinmux accordingly. Console is on UART7 now, add pinmux,
base address and update console string in environment.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
board/ccv/xpress/xpress.c | 14 ++++++++++----
include/configs/xpress.h | 4 ++--
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/board/ccv/xpress/xpress.c b/board/ccv/xpress/xpress.c
index b65646588a..8de2c4e6c2 100644
--- a/board/ccv/xpress/xpress.c
+++ b/board/ccv/xpress/xpress.c
@@ -108,6 +108,8 @@ int dram_init(void)
static iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_CTS_B__UART1_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_RTS_B__UART1_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart4_pads[] = {
@@ -122,11 +124,14 @@ static iomux_v3_cfg_t const uart5_pads[] = {
MX6_PAD_GPIO1_IO08__UART5_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
};
+static iomux_v3_cfg_t const uart7_pads[] = {
+ MX6_PAD_ENET2_RX_EN__UART7_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
static iomux_v3_cfg_t const uart8_pads[] = {
- MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_ENET2_TX_EN__UART8_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_LCD_DATA20__UART8_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_LCD_DATA21__UART8_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static void setup_iomux_uart(void)
@@ -134,6 +139,7 @@ static void setup_iomux_uart(void)
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
+ imx_iomux_v3_setup_multiple_pads(uart7_pads, ARRAY_SIZE(uart7_pads));
imx_iomux_v3_setup_multiple_pads(uart8_pads, ARRAY_SIZE(uart8_pads));
}
diff --git a/include/configs/xpress.h b/include/configs/xpress.h
index fdb504d9d9..c2575f01d9 100644
--- a/include/configs/xpress.h
+++ b/include/configs/xpress.h
@@ -18,7 +18,7 @@
#define CONFIG_SYS_MALLOC_LEN (16 << 20)
#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
+#define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
@@ -87,7 +87,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
- "console=ttymxc0\0" \
+ "console=ttymxc6\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=undefined\0" \
--
2.11.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] i.mx6ul: xpress: update UART init for current board revision
2017-10-02 19:32 [U-Boot] [PATCH] i.mx6ul: xpress: update UART init for current board revision Anatolij Gustschin
@ 2017-10-03 7:56 ` Stefano Babic
2017-10-12 16:23 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2017-10-03 7:56 UTC (permalink / raw)
To: u-boot
On 02/10/2017 21:32, Anatolij Gustschin wrote:
> UART pinmux has been changed on the last board revision. Change
> board pinmux accordingly. Console is on UART7 now, add pinmux,
> base address and update console string in environment.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
> board/ccv/xpress/xpress.c | 14 ++++++++++----
> include/configs/xpress.h | 4 ++--
> 2 files changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/board/ccv/xpress/xpress.c b/board/ccv/xpress/xpress.c
> index b65646588a..8de2c4e6c2 100644
> --- a/board/ccv/xpress/xpress.c
> +++ b/board/ccv/xpress/xpress.c
> @@ -108,6 +108,8 @@ int dram_init(void)
> static iomux_v3_cfg_t const uart1_pads[] = {
> MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_UART1_CTS_B__UART1_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_UART1_RTS_B__UART1_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
> };
>
> static iomux_v3_cfg_t const uart4_pads[] = {
> @@ -122,11 +124,14 @@ static iomux_v3_cfg_t const uart5_pads[] = {
> MX6_PAD_GPIO1_IO08__UART5_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
> };
>
> +static iomux_v3_cfg_t const uart7_pads[] = {
> + MX6_PAD_ENET2_RX_EN__UART7_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> +};
> +
> static iomux_v3_cfg_t const uart8_pads[] = {
> - MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> - MX6_PAD_ENET2_TX_EN__UART8_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> - MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
> - MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_LCD_DATA20__UART8_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_LCD_DATA21__UART8_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> };
>
> static void setup_iomux_uart(void)
> @@ -134,6 +139,7 @@ static void setup_iomux_uart(void)
> imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
> imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
> imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
> + imx_iomux_v3_setup_multiple_pads(uart7_pads, ARRAY_SIZE(uart7_pads));
> imx_iomux_v3_setup_multiple_pads(uart8_pads, ARRAY_SIZE(uart8_pads));
> }
>
> diff --git a/include/configs/xpress.h b/include/configs/xpress.h
> index fdb504d9d9..c2575f01d9 100644
> --- a/include/configs/xpress.h
> +++ b/include/configs/xpress.h
> @@ -18,7 +18,7 @@
> #define CONFIG_SYS_MALLOC_LEN (16 << 20)
>
> #define CONFIG_MXC_UART
> -#define CONFIG_MXC_UART_BASE UART1_BASE
> +#define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR
>
> /* MMC Configs */
> #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
> @@ -87,7 +87,7 @@
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> "image=zImage\0" \
> - "console=ttymxc0\0" \
> + "console=ttymxc6\0" \
> "fdt_high=0xffffffff\0" \
> "initrd_high=0xffffffff\0" \
> "fdt_file=undefined\0" \
>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] i.mx6ul: xpress: update UART init for current board revision
2017-10-02 19:32 [U-Boot] [PATCH] i.mx6ul: xpress: update UART init for current board revision Anatolij Gustschin
2017-10-03 7:56 ` Stefano Babic
@ 2017-10-12 16:23 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2017-10-12 16:23 UTC (permalink / raw)
To: u-boot
On 02/10/2017 21:32, Anatolij Gustschin wrote:
> UART pinmux has been changed on the last board revision. Change
> board pinmux accordingly. Console is on UART7 now, add pinmux,
> base address and update console string in environment.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-10-12 16:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-02 19:32 [U-Boot] [PATCH] i.mx6ul: xpress: update UART init for current board revision Anatolij Gustschin
2017-10-03 7:56 ` Stefano Babic
2017-10-12 16:23 ` Stefano Babic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.