All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To: Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>,
	Mauro Carvalho Chehab <mchehab@infradead.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Patrick Boettcher <patrick.boettcher@posteo.de>,
	Hans Verkuil <hans.verkuil@cisco.com>
Subject: [PATCH 17/35] [media] dib0090: use pr_foo() instead of printk()
Date: Wed, 16 Nov 2016 14:42:49 -0200	[thread overview]
Message-ID: <d8f78c773d144bccc678ecc5f3b49764e14b180d.1479314177.git.mchehab@s-opensource.com> (raw)
In-Reply-To: <cover.1479314177.git.mchehab@s-opensource.com>
In-Reply-To: <cover.1479314177.git.mchehab@s-opensource.com>

The dprintk() macro relies on continuation lines. This is not
a good practice and will break after commit 563873318d32
("Merge branch 'printk-cleanups").

So, instead of directly calling printk(), use pr_foo() macros,
adding a \n leading char on each macro call.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 drivers/media/dvb-frontends/dib0090.c | 164 +++++++++++++++++-----------------
 1 file changed, 83 insertions(+), 81 deletions(-)

diff --git a/drivers/media/dvb-frontends/dib0090.c b/drivers/media/dvb-frontends/dib0090.c
index 14c403254fe0..c07508319106 100644
--- a/drivers/media/dvb-frontends/dib0090.c
+++ b/drivers/media/dvb-frontends/dib0090.c
@@ -24,6 +24,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
@@ -38,13 +40,11 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
-#define dprintk(args...) do { \
-	if (debug) { \
-		printk(KERN_DEBUG "DiB0090: "); \
-		printk(args); \
-		printk("\n"); \
-	} \
-} while (0)
+#define dprintk(fmt, arg...) do {					\
+	if (debug)							\
+		printk(KERN_DEBUG pr_fmt("%s: " fmt),			\
+		       __func__ , ##arg);				\
+} while(0)
 
 #define CONFIG_SYS_DVBT
 #define CONFIG_SYS_ISDBT
@@ -218,7 +218,7 @@ static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg)
 	u16 ret;
 
 	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
+		dprintk("could not acquire lock\n");
 		return 0;
 	}
 
@@ -235,7 +235,7 @@ static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg)
 	state->msg[1].len = 2;
 
 	if (i2c_transfer(state->i2c, state->msg, 2) != 2) {
-		printk(KERN_WARNING "DiB0090 I2C read failed\n");
+		pr_warn("DiB0090 I2C read failed\n");
 		ret = 0;
 	} else
 		ret = (state->i2c_read_buffer[0] << 8)
@@ -250,7 +250,7 @@ static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val)
 	int ret;
 
 	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
+		dprintk("could not acquire lock\n");
 		return -EINVAL;
 	}
 
@@ -265,7 +265,7 @@ static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val)
 	state->msg[0].len = 3;
 
 	if (i2c_transfer(state->i2c, state->msg, 1) != 1) {
-		printk(KERN_WARNING "DiB0090 I2C write failed\n");
+		pr_warn("DiB0090 I2C write failed\n");
 		ret = -EREMOTEIO;
 	} else
 		ret = 0;
@@ -279,7 +279,7 @@ static u16 dib0090_fw_read_reg(struct dib0090_fw_state *state, u8 reg)
 	u16 ret;
 
 	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
+		dprintk("could not acquire lock\n");
 		return 0;
 	}
 
@@ -291,7 +291,7 @@ static u16 dib0090_fw_read_reg(struct dib0090_fw_state *state, u8 reg)
 	state->msg.buf = state->i2c_read_buffer;
 	state->msg.len = 2;
 	if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
-		printk(KERN_WARNING "DiB0090 I2C read failed\n");
+		pr_warn("DiB0090 I2C read failed\n");
 		ret = 0;
 	} else
 		ret = (state->i2c_read_buffer[0] << 8)
@@ -306,7 +306,7 @@ static int dib0090_fw_write_reg(struct dib0090_fw_state *state, u8 reg, u16 val)
 	int ret;
 
 	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
+		dprintk("could not acquire lock\n");
 		return -EINVAL;
 	}
 
@@ -319,7 +319,7 @@ static int dib0090_fw_write_reg(struct dib0090_fw_state *state, u8 reg, u16 val)
 	state->msg.buf = state->i2c_write_buffer;
 	state->msg.len = 2;
 	if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
-		printk(KERN_WARNING "DiB0090 I2C write failed\n");
+		pr_warn("DiB0090 I2C write failed\n");
 		ret = -EREMOTEIO;
 	} else
 		ret = 0;
@@ -351,7 +351,7 @@ static int dib0090_identify(struct dvb_frontend *fe)
 	identity->p1g = 0;
 	identity->in_soc = 0;
 
-	dprintk("Tuner identification (Version = 0x%04x)", v);
+	dprintk("Tuner identification (Version = 0x%04x)\n", v);
 
 	/* without PLL lock info */
 	v &= ~KROSUS_PLL_LOCKED;
@@ -366,19 +366,19 @@ static int dib0090_identify(struct dvb_frontend *fe)
 		identity->in_soc = 1;
 		switch (identity->version) {
 		case SOC_8090_P1G_11R1:
-			dprintk("SOC 8090 P1-G11R1 Has been detected");
+			dprintk("SOC 8090 P1-G11R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		case SOC_8090_P1G_21R1:
-			dprintk("SOC 8090 P1-G21R1 Has been detected");
+			dprintk("SOC 8090 P1-G21R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		case SOC_7090_P1G_11R1:
-			dprintk("SOC 7090 P1-G11R1 Has been detected");
+			dprintk("SOC 7090 P1-G11R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		case SOC_7090_P1G_21R1:
-			dprintk("SOC 7090 P1-G21R1 Has been detected");
+			dprintk("SOC 7090 P1-G21R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		default:
@@ -387,16 +387,16 @@ static int dib0090_identify(struct dvb_frontend *fe)
 	} else {
 		switch ((identity->version >> 5) & 0x7) {
 		case MP001:
-			dprintk("MP001 : 9090/8096");
+			dprintk("MP001 : 9090/8096\n");
 			break;
 		case MP005:
-			dprintk("MP005 : Single Sband");
+			dprintk("MP005 : Single Sband\n");
 			break;
 		case MP008:
-			dprintk("MP008 : diversity VHF-UHF-LBAND");
+			dprintk("MP008 : diversity VHF-UHF-LBAND\n");
 			break;
 		case MP009:
-			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND");
+			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND\n");
 			break;
 		default:
 			goto identification_error;
@@ -404,21 +404,21 @@ static int dib0090_identify(struct dvb_frontend *fe)
 
 		switch (identity->version & 0x1f) {
 		case P1G_21R2:
-			dprintk("P1G_21R2 detected");
+			dprintk("P1G_21R2 detected\n");
 			identity->p1g = 1;
 			break;
 		case P1G:
-			dprintk("P1G detected");
+			dprintk("P1G detected\n");
 			identity->p1g = 1;
 			break;
 		case P1D_E_F:
-			dprintk("P1D/E/F detected");
+			dprintk("P1D/E/F detected\n");
 			break;
 		case P1C:
-			dprintk("P1C detected");
+			dprintk("P1C detected\n");
 			break;
 		case P1A_B:
-			dprintk("P1-A/B detected: driver is deactivated - not available");
+			dprintk("P1-A/B detected: driver is deactivated - not available\n");
 			goto identification_error;
 			break;
 		default:
@@ -441,7 +441,7 @@ static int dib0090_fw_identify(struct dvb_frontend *fe)
 	identity->p1g = 0;
 	identity->in_soc = 0;
 
-	dprintk("FE: Tuner identification (Version = 0x%04x)", v);
+	dprintk("FE: Tuner identification (Version = 0x%04x)\n", v);
 
 	/* without PLL lock info */
 	v &= ~KROSUS_PLL_LOCKED;
@@ -456,19 +456,19 @@ static int dib0090_fw_identify(struct dvb_frontend *fe)
 		identity->in_soc = 1;
 		switch (identity->version) {
 		case SOC_8090_P1G_11R1:
-			dprintk("SOC 8090 P1-G11R1 Has been detected");
+			dprintk("SOC 8090 P1-G11R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		case SOC_8090_P1G_21R1:
-			dprintk("SOC 8090 P1-G21R1 Has been detected");
+			dprintk("SOC 8090 P1-G21R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		case SOC_7090_P1G_11R1:
-			dprintk("SOC 7090 P1-G11R1 Has been detected");
+			dprintk("SOC 7090 P1-G11R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		case SOC_7090_P1G_21R1:
-			dprintk("SOC 7090 P1-G21R1 Has been detected");
+			dprintk("SOC 7090 P1-G21R1 Has been detected\n");
 			identity->p1g = 1;
 			break;
 		default:
@@ -477,16 +477,16 @@ static int dib0090_fw_identify(struct dvb_frontend *fe)
 	} else {
 		switch ((identity->version >> 5) & 0x7) {
 		case MP001:
-			dprintk("MP001 : 9090/8096");
+			dprintk("MP001 : 9090/8096\n");
 			break;
 		case MP005:
-			dprintk("MP005 : Single Sband");
+			dprintk("MP005 : Single Sband\n");
 			break;
 		case MP008:
-			dprintk("MP008 : diversity VHF-UHF-LBAND");
+			dprintk("MP008 : diversity VHF-UHF-LBAND\n");
 			break;
 		case MP009:
-			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND");
+			dprintk("MP009 : diversity 29098 CBAND-UHF-LBAND-SBAND\n");
 			break;
 		default:
 			goto identification_error;
@@ -494,21 +494,21 @@ static int dib0090_fw_identify(struct dvb_frontend *fe)
 
 		switch (identity->version & 0x1f) {
 		case P1G_21R2:
-			dprintk("P1G_21R2 detected");
+			dprintk("P1G_21R2 detected\n");
 			identity->p1g = 1;
 			break;
 		case P1G:
-			dprintk("P1G detected");
+			dprintk("P1G detected\n");
 			identity->p1g = 1;
 			break;
 		case P1D_E_F:
-			dprintk("P1D/E/F detected");
+			dprintk("P1D/E/F detected\n");
 			break;
 		case P1C:
-			dprintk("P1C detected");
+			dprintk("P1C detected\n");
 			break;
 		case P1A_B:
-			dprintk("P1-A/B detected: driver is deactivated - not available");
+			dprintk("P1-A/B detected: driver is deactivated - not available\n");
 			goto identification_error;
 			break;
 		default:
@@ -574,7 +574,7 @@ static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_
 		} while (--i);
 
 		if (i == 0) {
-			dprintk("Pll: Unable to lock Pll");
+			dprintk("Pll: Unable to lock Pll\n");
 			return;
 		}
 
@@ -596,7 +596,7 @@ static int dib0090_fw_reset_digital(struct dvb_frontend *fe, const struct dib009
 	u16 v;
 	int i;
 
-	dprintk("fw reset digital");
+	dprintk("fw reset digital\n");
 	HARD_RESET(state);
 
 	dib0090_fw_write_reg(state, 0x24, EN_PLL | EN_CRYSTAL);
@@ -645,7 +645,7 @@ static int dib0090_fw_reset_digital(struct dvb_frontend *fe, const struct dib009
 		} while (--i);
 
 		if (i == 0) {
-			dprintk("Pll: Unable to lock Pll");
+			dprintk("Pll: Unable to lock Pll\n");
 			return -EIO;
 		}
 
@@ -922,7 +922,7 @@ static void dib0090_wbd_target(struct dib0090_state *state, u32 rf)
 #endif
 
 	state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + offset);
-	dprintk("wbd-target: %d dB", (u32) state->wbd_target);
+	dprintk("wbd-target: %d dB\n", (u32) state->wbd_target);
 }
 
 static const int gain_reg_addr[4] = {
@@ -1019,7 +1019,7 @@ static void dib0090_gain_apply(struct dib0090_state *state, s16 gain_delta, s16
 	gain_reg[3] |= ((bb % 10) * 100) / 125;
 
 #ifdef DEBUG_AGC
-	dprintk("GA CALC: DB: %3d(rf) + %3d(bb) = %3d gain_reg[0]=%04x gain_reg[1]=%04x gain_reg[2]=%04x gain_reg[0]=%04x", rf, bb, rf + bb,
+	dprintk("GA CALC: DB: %3d(rf) + %3d(bb) = %3d gain_reg[0]=%04x gain_reg[1]=%04x gain_reg[2]=%04x gain_reg[0]=%04x\n", rf, bb, rf + bb,
 		gain_reg[0], gain_reg[1], gain_reg[2], gain_reg[3]);
 #endif
 
@@ -1050,7 +1050,7 @@ static void dib0090_set_rframp_pwm(struct dib0090_state *state, const u16 * cfg)
 
 	dib0090_write_reg(state, 0x2a, 0xffff);
 
-	dprintk("total RF gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x2a));
+	dprintk("total RF gain: %ddB, step: %d\n", (u32) cfg[0], dib0090_read_reg(state, 0x2a));
 
 	dib0090_write_regs(state, 0x2c, cfg + 3, 6);
 	dib0090_write_regs(state, 0x3e, cfg + 9, 2);
@@ -1069,7 +1069,7 @@ static void dib0090_set_bbramp_pwm(struct dib0090_state *state, const u16 * cfg)
 	dib0090_set_boost(state, cfg[0] > 500);	/* we want the boost if the gain is higher that 50dB */
 
 	dib0090_write_reg(state, 0x33, 0xffff);
-	dprintk("total BB gain: %ddB, step: %d", (u32) cfg[0], dib0090_read_reg(state, 0x33));
+	dprintk("total BB gain: %ddB, step: %d\n", (u32) cfg[0], dib0090_read_reg(state, 0x33));
 	dib0090_write_regs(state, 0x35, cfg + 3, 4);
 }
 
@@ -1122,7 +1122,7 @@ void dib0090_pwm_gain_reset(struct dvb_frontend *fe)
 
 		/* activate the ramp generator using PWM control */
 		if (state->rf_ramp)
-			dprintk("ramp RF gain = %d BAND = %s version = %d",
+			dprintk("ramp RF gain = %d BAND = %s version = %d\n",
 				state->rf_ramp[0],
 				(state->current_band == BAND_CBAND) ? "CBAND" : "NOT CBAND",
 				state->identity.version & 0x1f);
@@ -1130,10 +1130,10 @@ void dib0090_pwm_gain_reset(struct dvb_frontend *fe)
 		if (rf_ramp && ((state->rf_ramp && state->rf_ramp[0] == 0) ||
 		    (state->current_band == BAND_CBAND &&
 		    (state->identity.version & 0x1f) <= P1D_E_F))) {
-			dprintk("DE-Engage mux for direct gain reg control");
+			dprintk("DE-Engage mux for direct gain reg control\n");
 			en_pwm_rf_mux = 0;
 		} else
-			dprintk("Engage mux for PWM control");
+			dprintk("Engage mux for PWM control\n");
 
 		dib0090_write_reg(state, 0x32, (en_pwm_rf_mux << 12) | (en_pwm_rf_mux << 11));
 
@@ -1352,7 +1352,7 @@ u16 dib0090_get_wbd_target(struct dvb_frontend *fe)
 	while (f_MHz > wbd->max_freq)
 		wbd++;
 
-	dprintk("using wbd-table-entry with max freq %d", wbd->max_freq);
+	dprintk("using wbd-table-entry with max freq %d\n", wbd->max_freq);
 
 	if (current_temp < 0)
 		current_temp = 0;
@@ -1373,8 +1373,8 @@ u16 dib0090_get_wbd_target(struct dvb_frontend *fe)
 	wbd_tcold += ((wbd_thot - wbd_tcold) * current_temp) >> 7;
 
 	state->wbd_target = dib0090_wbd_to_db(state, state->wbd_offset + wbd_tcold);
-	dprintk("wbd-target: %d dB", (u32) state->wbd_target);
-	dprintk("wbd offset applied is %d", wbd_tcold);
+	dprintk("wbd-target: %d dB\n", (u32) state->wbd_target);
+	dprintk("wbd offset applied is %d\n", wbd_tcold);
 
 	return state->wbd_offset + wbd_tcold;
 }
@@ -1415,7 +1415,7 @@ int dib0090_update_rframp_7090(struct dvb_frontend *fe, u8 cfg_sensitivity)
 	if ((!state->identity.p1g) || (!state->identity.in_soc)
 			|| ((state->identity.version != SOC_7090_P1G_21R1)
 				&& (state->identity.version != SOC_7090_P1G_11R1))) {
-		dprintk("%s() function can only be used for dib7090P", __func__);
+		dprintk("%s() function can only be used for dib7090P\n", __func__);
 		return -ENODEV;
 	}
 
@@ -1598,7 +1598,7 @@ static int dib0090_reset(struct dvb_frontend *fe)
 		dib0090_write_reg(state, 0x14, 1);
 	else
 		dib0090_write_reg(state, 0x14, 2);
-	dprintk("Pll lock : %d", (dib0090_read_reg(state, 0x1a) >> 11) & 0x1);
+	dprintk("Pll lock : %d\n", (dib0090_read_reg(state, 0x1a) >> 11) & 0x1);
 
 	state->calibrate = DC_CAL | WBD_CAL | TEMP_CAL;	/* enable iq-offset-calibration and wbd-calibration when tuning next time */
 
@@ -1711,7 +1711,8 @@ static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum front
 
 		/* fall through */
 	case CT_TUNER_STEP_0:
-		dprintk("Start/continue DC calibration for %s path", (state->dc->i == 1) ? "I" : "Q");
+		dprintk("Start/continue DC calibration for %s path\n",
+			(state->dc->i == 1) ? "I" : "Q");
 		dib0090_write_reg(state, 0x01, state->dc->bb1);
 		dib0090_write_reg(state, 0x07, state->bb7 | (state->dc->i << 7));
 
@@ -1733,13 +1734,13 @@ static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum front
 		break;
 
 	case CT_TUNER_STEP_5:	/* found an offset */
-		dprintk("adc_diff = %d, current step= %d", (u32) state->adc_diff, state->step);
+		dprintk("adc_diff = %d, current step= %d\n", (u32) state->adc_diff, state->step);
 		if (state->step == 0 && state->adc_diff < 0) {
 			state->min_adc_diff = -1023;
-			dprintk("Change of sign of the minimum adc diff");
+			dprintk("Change of sign of the minimum adc diff\n");
 		}
 
-		dprintk("adc_diff = %d, min_adc_diff = %d current_step = %d", state->adc_diff, state->min_adc_diff, state->step);
+		dprintk("adc_diff = %d, min_adc_diff = %d current_step = %d\n", state->adc_diff, state->min_adc_diff, state->step);
 
 		/* first turn for this frequency */
 		if (state->step == 0) {
@@ -1758,12 +1759,12 @@ static int dib0090_dc_offset_calibration(struct dib0090_state *state, enum front
 		} else {
 			/* the minimum was what we have seen in the step before */
 			if (ABS(state->adc_diff) > ABS(state->min_adc_diff)) {
-				dprintk("Since adc_diff N = %d  > adc_diff step N-1 = %d, Come back one step", state->adc_diff, state->min_adc_diff);
+				dprintk("Since adc_diff N = %d  > adc_diff step N-1 = %d, Come back one step\n", state->adc_diff, state->min_adc_diff);
 				state->step--;
 			}
 
 			dib0090_set_trim(state);
-			dprintk("BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd", state->dc->addr, state->adc_diff, state->step);
+			dprintk("BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd\n", state->dc->addr, state->adc_diff, state->step);
 
 			state->dc++;
 			if (state->dc->addr == 0)	/* done */
@@ -1819,7 +1820,7 @@ static int dib0090_wbd_calibration(struct dib0090_state *state, enum frontend_tu
 
 	case CT_TUNER_STEP_0:
 		state->wbd_offset = dib0090_get_slow_adc_val(state);
-		dprintk("WBD calibration offset = %d", state->wbd_offset);
+		dprintk("WBD calibration offset = %d\n", state->wbd_offset);
 		*tune_state = CT_TUNER_START;	/* reset done -> real tuning can now begin */
 		state->calibrate &= ~WBD_CAL;
 		break;
@@ -2064,7 +2065,7 @@ int dib0090_update_tuning_table_7090(struct dvb_frontend *fe,
 	if ((!state->identity.p1g) || (!state->identity.in_soc)
 			|| ((state->identity.version != SOC_7090_P1G_21R1)
 				&& (state->identity.version != SOC_7090_P1G_11R1))) {
-		dprintk("%s() function can only be used for dib7090", __func__);
+		dprintk("%s() function can only be used for dib7090\n", __func__);
 		return -ENODEV;
 	}
 
@@ -2098,7 +2099,8 @@ static int dib0090_captrim_search(struct dib0090_state *state, enum frontend_tun
 		force_soft_search = 1;
 
 	if (*tune_state == CT_TUNER_START) {
-		dprintk("Start Captrim search : %s", (force_soft_search == 1) ? "FORCE SOFT SEARCH" : "AUTO");
+		dprintk("Start Captrim search : %s\n",
+			(force_soft_search == 1) ? "FORCE SOFT SEARCH" : "AUTO");
 		dib0090_write_reg(state, 0x10, 0x2B1);
 		dib0090_write_reg(state, 0x1e, 0x0032);
 
@@ -2140,13 +2142,13 @@ static int dib0090_captrim_search(struct dib0090_state *state, enum frontend_tun
 			dib0090_read_reg(state, 0x40);
 
 			state->fcaptrim = dib0090_read_reg(state, 0x18) & 0x7F;
-			dprintk("***Final Captrim= 0x%x", state->fcaptrim);
+			dprintk("***Final Captrim= 0x%x\n", state->fcaptrim);
 			*tune_state = CT_TUNER_STEP_3;
 
 		} else {
 			/* MERGE for all krosus before P1G */
 			adc = dib0090_get_slow_adc_val(state);
-			dprintk("CAPTRIM=%d; ADC = %d (ADC) & %dmV", (u32) state->captrim, (u32) adc, (u32) (adc) * (u32) 1800 / (u32) 1024);
+			dprintk("CAPTRIM=%d; ADC = %d (ADC) & %dmV\n", (u32) state->captrim, (u32) adc, (u32) (adc) * (u32) 1800 / (u32) 1024);
 
 			if (state->rest == 0 || state->identity.in_soc) {	/* Just for 8090P SOCS where auto captrim HW bug : TO CHECK IN ACI for SOCS !!! if 400 for 8090p SOC => tune issue !!! */
 				adc_target = 200;
@@ -2162,7 +2164,7 @@ static int dib0090_captrim_search(struct dib0090_state *state, enum frontend_tun
 			}
 
 			if (adc < state->adc_diff) {
-				dprintk("CAPTRIM=%d is closer to target (%d/%d)", (u32) state->captrim, (u32) adc, (u32) state->adc_diff);
+				dprintk("CAPTRIM=%d is closer to target (%d/%d)\n", (u32) state->captrim, (u32) adc, (u32) state->adc_diff);
 				state->adc_diff = adc;
 				state->fcaptrim = state->captrim;
 			}
@@ -2216,7 +2218,7 @@ static int dib0090_get_temperature(struct dib0090_state *state, enum frontend_tu
 		val = dib0090_get_slow_adc_val(state);
 		state->temperature = ((s16) ((val - state->adc_diff) * 180) >> 8) + 55;
 
-		dprintk("temperature: %d C", state->temperature - 30);
+		dprintk("temperature: %d C\n", state->temperature - 30);
 
 		*tune_state = CT_TUNER_STEP_2;
 		break;
@@ -2478,13 +2480,13 @@ static int dib0090_tune(struct dvb_frontend *fe)
 			wbd++;
 
 		dib0090_write_reg(state, 0x1e, 0x07ff);
-		dprintk("Final Captrim: %d", (u32) state->fcaptrim);
-		dprintk("HFDIV code: %d", (u32) pll->hfdiv_code);
-		dprintk("VCO = %d", (u32) pll->vco_band);
-		dprintk("VCOF in kHz: %d ((%d*%d) << 1))", (u32) ((pll->hfdiv * state->rf_request) * 2), (u32) pll->hfdiv, (u32) state->rf_request);
-		dprintk("REFDIV: %d, FREF: %d", (u32) 1, (u32) state->config->io.clock_khz);
-		dprintk("FBDIV: %d, Rest: %d", (u32) dib0090_read_reg(state, 0x15), (u32) dib0090_read_reg(state, 0x17));
-		dprintk("Num: %d, Den: %d, SD: %d", (u32) dib0090_read_reg(state, 0x17), (u32) (dib0090_read_reg(state, 0x16) >> 8),
+		dprintk("Final Captrim: %d\n", (u32) state->fcaptrim);
+		dprintk("HFDIV code: %d\n", (u32) pll->hfdiv_code);
+		dprintk("VCO = %d\n", (u32) pll->vco_band);
+		dprintk("VCOF in kHz: %d ((%d*%d) << 1))\n", (u32) ((pll->hfdiv * state->rf_request) * 2), (u32) pll->hfdiv, (u32) state->rf_request);
+		dprintk("REFDIV: %d, FREF: %d\n", (u32) 1, (u32) state->config->io.clock_khz);
+		dprintk("FBDIV: %d, Rest: %d\n", (u32) dib0090_read_reg(state, 0x15), (u32) dib0090_read_reg(state, 0x17));
+		dprintk("Num: %d, Den: %d, SD: %d\n", (u32) dib0090_read_reg(state, 0x17), (u32) (dib0090_read_reg(state, 0x16) >> 8),
 			(u32) dib0090_read_reg(state, 0x1c) & 0x3);
 
 #define WBD     0x781		/* 1 1 1 1 0000 0 0 1 */
@@ -2498,7 +2500,7 @@ static int dib0090_tune(struct dvb_frontend *fe)
 		dib0090_write_reg(state, 0x10, state->wbdmux);
 
 		if ((tune->tuner_enable == EN_CAB) && state->identity.p1g) {
-			dprintk("P1G : The cable band is selected and lna_tune = %d", tune->lna_tune);
+			dprintk("P1G : The cable band is selected and lna_tune = %d\n", tune->lna_tune);
 			dib0090_write_reg(state, 0x09, tune->lna_bias);
 			dib0090_write_reg(state, 0x0b, 0xb800 | (tune->lna_tune << 6) | (tune->switch_trim));
 		} else
@@ -2643,7 +2645,7 @@ struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapte
 	if (dib0090_reset(fe) != 0)
 		goto free_mem;
 
-	printk(KERN_INFO "DiB0090: successfully identified\n");
+	pr_info("DiB0090: successfully identified\n");
 	memcpy(&fe->ops.tuner_ops, &dib0090_ops, sizeof(struct dvb_tuner_ops));
 
 	return fe;
@@ -2670,7 +2672,7 @@ struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_ada
 	if (dib0090_fw_reset_digital(fe, st->config) != 0)
 		goto free_mem;
 
-	dprintk("DiB0090 FW: successfully identified");
+	dprintk("DiB0090 FW: successfully identified\n");
 	memcpy(&fe->ops.tuner_ops, &dib0090_fw_ops, sizeof(struct dvb_tuner_ops));
 
 	return fe;
-- 
2.7.4



  parent reply	other threads:[~2016-11-16 16:43 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-16 16:42 [PATCH 00/35] Some printk fixups and improvements Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 01/35] [media] stb0899_drv: get rid of continuation lines Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 02/35] [media] stv090x: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 03/35] [media] bt8xx/dst: use a more standard way to print messages Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 04/35] [media] bt8xx: use pr_foo() macros instead of printk() Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 05/35] [media] cx23885: use KERN_CONT where needed Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 06/35] [media] cx23885: convert it to use pr_foo() macros Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 07/35] [media] cx88: use KERN_CONT where needed Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 08/35] [media] cx88: convert it to use pr_foo() macros Mauro Carvalho Chehab
2016-11-18 22:27   ` Andrey Utkin
2016-11-19 12:16     ` Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 09/35] [media] cx88: make checkpatch happier Mauro Carvalho Chehab
2016-11-18 22:25   ` Andrey Utkin
2016-11-19 12:14     ` Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 10/35] [media] pluto2: use KERN_CONT where needed Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 11/35] [media] zoran: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 12/35] [media] wl128x: use KERNEL_CONT " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 13/35] [media] pvrusb2: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 14/35] [media] ttusb_dec: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 15/35] [media] ttpci: cleanup debug macros and remove dead code Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 16/35] [media] dib0070: use pr_foo() instead of printk() Mauro Carvalho Chehab
2016-11-16 16:42 ` Mauro Carvalho Chehab [this message]
2016-11-16 16:42 ` [PATCH 18/35] [media] dib3000mb: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 19/35] [media] dib3000mc: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 20/35] [media] dib7000m: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 21/35] [media] dib7000p: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 22/35] [media] dib8000: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 23/35] [media] dib9000: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 24/35] [media] dibx000_common: " Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 25/35] [media] af9005: remove a printk that would require a KERN_CONT Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 26/35] [media] tuner-core: use pr_foo, instead of internal printk macros Mauro Carvalho Chehab
2016-11-16 16:42 ` [PATCH 27/35] [media] v4l2-common: add a debug macro to be used with dev_foo() Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 28/35] [media] msp3400-driver: don't use KERN_CONT Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 29/35] [media] msp3400: convert it to use dev_foo() macros Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 30/35] [media] em28xx: convert it from pr_foo() to dev_foo() Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 31/35] [media] tvp5150: convert it to use dev_foo() macros Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 32/35] [media] tvp5150: Get rid of direct calls to printk() Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 33/35] [media] tvp5150: get rid of KERN_CONT Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 34/35] [media] rc-main: use pr_foo() macros Mauro Carvalho Chehab
2016-11-16 16:43 ` [PATCH 35/35] [media] tveeprom: print log messages using pr_foo() Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d8f78c773d144bccc678ecc5f3b49764e14b180d.1479314177.git.mchehab@s-opensource.com \
    --to=mchehab@s-opensource.com \
    --cc=hans.verkuil@cisco.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@infradead.org \
    --cc=mchehab@kernel.org \
    --cc=patrick.boettcher@posteo.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.