* BigRAMPlus seems to be detected now
@ 2020-03-07 21:00 John Paul Adrian Glaubitz
2020-03-08 10:36 ` Geert Uytterhoeven
2021-01-15 19:07 ` John Paul Adrian Glaubitz
0 siblings, 2 replies; 8+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-03-07 21:00 UTC (permalink / raw)
To: linux-m68k; +Cc: Debian m68k
Hi!
There is one user in the #debian-68k IRC channel who has tried installing Debian
on his A4000 with a A3660 and a BigRAMPlus installed and while the user is currently
running into problems with the kernel being stuck, to my surprise, the kernel seems
to be able to use and detect the extra memory from the BigRAMPlus (see below).
The kernel is reporting an address conflict though:
[ 6.140000] Zorro: Probing AutoConfig expansion devices: 3 devices
[ 6.150000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-]
The question whether the lock up is caused by the BRP. But since this Amiga has only
16 MB FAST RAM, the user hasn't tested to boot without the BRP yet.
I will dig out my BRP tomorrow and see if it's actually detected in my A4000
as well with current kernel versions.
Adrian
=====================================================================================
[ 0.000000] Linux version 5.4.19 (root@m68k) (gcc version 9.2.1 20200203 (Debian 9.2.1-28)) #2 Sun Mar 1 19:56:48 P0
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] On node 1 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 68952
[ 0.000000] Kernel command line: debug=serial console=ttyS0 video=amifb:pal-lace BOOT_IMAGE=vmlinux
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 269252K/278528K available (4312K kernel code, 365K rwdata, 984K rodata, 152K init, 201K bss, 92)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2e/0x528 with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 32
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.000000] Console: colour dummy device 80x25
[ 0.260000] printk: console [ttyS0] enabled
[ 0.270000] Calibrating delay loop... 115.09 BogoMIPS (lpj=575488)
[ 0.370000] pid_max: default: 32768 minimum: 301
[ 0.410000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.420000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.480000] random: fast init done
[ 0.580000] devtmpfs: initialized
[ 0.630000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.640000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.690000] NET: Registered protocol family 16
[ 0.710000] DMA: preallocated 256 KiB pool for atomic allocations
[ 1.560000] SCSI subsystem initialized
[ 1.580000] libata version 3.00 loaded.
[ 1.630000] clocksource: Switched to clocksource ciab
[ 1.660000] VFS: Disk quotas dquot_6.6.0
[ 1.670000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.290000] NET: Registered protocol family 2
[ 2.340000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 2.350000] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.370000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.390000] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.410000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.420000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.450000] NET: Registered protocol family 1
[ 2.460000] NET: Registered protocol family 44
[ 2.510000] Initialise system trusted keyrings
[ 2.520000] Key type blacklist registered
[ 2.540000] workingset: timestamp_bits=11 max_order=17 bucket_order=6
[ 3.130000] zbud: loaded
[ 3.320000] Key type asymmetric registered
[ 3.350000] Asymmetric key parser 'x509' registered
[ 3.370000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.380000] io scheduler mq-deadline registered
[ 3.790000] Console: switching to colour frame buffer device 80x32
[ 3.850000] fb0: Amiga AGA frame buffer device, using 1280K of video memory
[ 3.890000] Amiga-builtin serial driver version 4.30
[ 3.910000] ttyS0 is the amiga builtin serial port
[ 3.930000] parport0: Amiga built-in port using irq
[ 4.030000] parport0: fix this legacy no-device port driver!
[ 4.050000] FD: probing units
[ 4.050000] found fd0 fd1
[ 4.840000] loop: module loaded
[ 6.020000] amiga-gayle-ide amiga-gayle-ide: Amiga Gayle IDE controller (A4000 style)
[ 6.090000] scsi host0: pata_gayle
[ 6.120000] ata1: PATA max PIO4 cmd 0xdd2020 ctl 0xdd303a irq 2
[ 6.140000] Zorro: Probing AutoConfig expansion devices: 3 devices
[ 6.150000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-]
[ 6.200000] mousedev: PS/2 mouse device common for all mice
[ 6.220000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0
[ 6.240000] input: amiga-mouse as /devices/platform/amiga-mouse/input/input1
[ 6.270000] input: Amiga joystick as /devices/virtual/input/input2
[ 6.300000] input: m68k beeper as /devices/platform/m68kspkr/input/input3
[ 6.330000] rtc-rp5c01 rtc-rp5c01: registered as rtc0
[ 6.350000] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.390000] Amiga DMA sound driver rev 016 installed
[ 6.400000] Core driver edition 01.06 : AMIGA driver edition 00.04
[ 6.410000] Write will use 4 fragments of 32768 bytes as default
[ 6.430000] NET: Registered protocol family 17
[ 6.450000] mpls_gso: MPLS GSO support
[ 6.470000] registered taskstats version 1
[ 6.480000] Loading compiled-in X.509 certificates
[ 6.490000] zswap: loaded using pool lzo/zbud
[ 6.530000] Key type ._fscrypt registered
[ 6.540000] Key type .fscrypt registered
[ 6.680000] random: crng init done
[ 28.580000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [scsi_eh_0:57]
[ 28.580000] Modules linked in:
[ 28.580000] Format 00 Vector: 0078 PC: 002c3f1a Status: 2210 Not tainted
[ 28.580000] ORIG_D0: ffffffff D0: 95eb9164 A2: 00ed4c60 A1: 00ed14a6
[ 28.580000] A0: 0054d2de D5: 30870f62 D4: 0000000e
[ 28.580000] D3: ffff95f9 D2: 4f8a597a D1: 5f5936c3
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BigRAMPlus seems to be detected now
2020-03-07 21:00 BigRAMPlus seems to be detected now John Paul Adrian Glaubitz
@ 2020-03-08 10:36 ` Geert Uytterhoeven
2020-03-10 2:51 ` Stefan Reinauer
2020-03-10 3:06 ` Stefan Reinauer
2021-01-15 19:07 ` John Paul Adrian Glaubitz
1 sibling, 2 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2020-03-08 10:36 UTC (permalink / raw)
To: John Paul Adrian Glaubitz; +Cc: linux-m68k, Debian m68k
Hi Adrian,
On Sat, Mar 7, 2020 at 10:01 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
> There is one user in the #debian-68k IRC channel who has tried installing Debian
> on his A4000 with a A3660 and a BigRAMPlus installed and while the user is currently
> running into problems with the kernel being stuck, to my surprise, the kernel seems
> to be able to use and detect the extra memory from the BigRAMPlus (see below).
Good!
> The kernel is reporting an address conflict though:
>
> [ 6.140000] Zorro: Probing AutoConfig expansion devices: 3 devices
> [ 6.150000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-]
That is expected: the address space reported by the BRP Zorro device
is already in use, as it is part of system RAM. The message is harmless
in this case.
We could skip registering the resource if z->rom.er_Type & ERTF_MEMLIST,
which is a hint for AmigaOS to link the board's RAM into the free memory
list, but that may cause issues with Zorro II RAM excluded in a memfile.
So perhaps it's best to just skip printing that message if ERTF_MEMLIST
is set?
> The question whether the lock up is caused by the BRP. But since this Amiga has only
> 16 MB FAST RAM, the user hasn't tested to boot without the BRP yet.
Just booting the kernel with the BRP disabled (through a memfile, or
through mem=16M), would give very valuable information.
As well as trying to boot it with the BRP as primary memory (BRP first
in memfile) or sole memory (motherboard RAM disabled in memfile).
> I will dig out my BRP tomorrow and see if it's actually detected in my A4000
> as well with current kernel versions.
Looking forward to these results!
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BigRAMPlus seems to be detected now
2020-03-08 10:36 ` Geert Uytterhoeven
@ 2020-03-10 2:51 ` Stefan Reinauer
2020-03-10 3:06 ` Stefan Reinauer
1 sibling, 0 replies; 8+ messages in thread
From: Stefan Reinauer @ 2020-03-10 2:51 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: Type: text/plain, Size: 2874 bytes --]
Hi,
I'm the user that Adrian has been helping patiently over the last few
days. Much appreciated!
I believe now the A4000D might have issues with the on-board fast ram.
Creating a memfile with only chipram and the bigram (and not on-board
fast ram)
at least got me to a debug shell in the installer.
I could not get into the actual installer yet, but maybe I need to be
more patient. See attached logs.
It seems that pata_gayle does not detect my drives, but the old gayle
driver times out along the way after detecting the drive and reading
its RDB.
Will gladly provide any logs you guys deem useful.
Stefan
On Sun, Mar 8, 2020 at 3:43 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Adrian,
>
> On Sat, Mar 7, 2020 at 10:01 PM John Paul Adrian Glaubitz
> <glaubitz@physik.fu-berlin.de> wrote:
> > There is one user in the #debian-68k IRC channel who has tried installing Debian
> > on his A4000 with a A3660 and a BigRAMPlus installed and while the user is currently
> > running into problems with the kernel being stuck, to my surprise, the kernel seems
> > to be able to use and detect the extra memory from the BigRAMPlus (see below).
>
> Good!
>
> > The kernel is reporting an address conflict though:
> >
> > [ 6.140000] Zorro: Probing AutoConfig expansion devices: 3 devices
> > [ 6.150000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-]
>
> That is expected: the address space reported by the BRP Zorro device
> is already in use, as it is part of system RAM. The message is harmless
> in this case.
>
> We could skip registering the resource if z->rom.er_Type & ERTF_MEMLIST,
> which is a hint for AmigaOS to link the board's RAM into the free memory
> list, but that may cause issues with Zorro II RAM excluded in a memfile.
> So perhaps it's best to just skip printing that message if ERTF_MEMLIST
> is set?
>
> > The question whether the lock up is caused by the BRP. But since this Amiga has only
> > 16 MB FAST RAM, the user hasn't tested to boot without the BRP yet.
>
> Just booting the kernel with the BRP disabled (through a memfile, or
> through mem=16M), would give very valuable information.
> As well as trying to boot it with the BRP as primary memory (BRP first
> in memfile) or sole memory (motherboard RAM disabled in memfile).
>
> > I will dig out my BRP tomorrow and see if it's actually detected in my A4000
> > as well with current kernel versions.
>
> Looking forward to these results!
> Thanks!
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
[-- Attachment #2: newide.txt --]
[-- Type: text/plain, Size: 14733 bytes --]
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.260000] printk: console [tty0] enabled
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] Console: colour dummy device 80x25
[ 0.260000] printk: console [tty0] enabled
[ 0.260000] printk: console [tty0] enabled
[ 0.510000] printk: console [ttyS0] enabled
[ 0.510000] printk: console [ttyS0] enabled
[ 0.520000] Calibrating delay loop... 111.51 BogoMIPS (lpj=557568)
[ 0.520000] Calibrating delay loop... 111.51 BogoMIPS (lpj=557568)
[ 0.620000] pid_max: default: 32768 minimum: 301
[ 0.620000] pid_max: default: 32768 minimum: 301
[ 0.650000] random: fast init done
[ 0.650000] random: fast init done
[ 0.680000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.680000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.700000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.700000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.960000] devtmpfs: initialized
[ 0.960000] devtmpfs: initialized
[ 1.060000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.060000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.090000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 1.090000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 1.150000] NET: Registered protocol family 16
[ 1.150000] NET: Registered protocol family 16
[ 2.600000] SCSI subsystem initialized
[ 2.600000] SCSI subsystem initialized
[ 2.690000] clocksource: Switched to clocksource ciab
[ 2.690000] clocksource: Switched to clocksource ciab
[ 2.730000] VFS: Disk quotas dquot_6.6.0
[ 2.730000] VFS: Disk quotas dquot_6.6.0
[ 2.740000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.740000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.920000] NET: Registered protocol family 2
[ 3.920000] NET: Registered protocol family 2
[ 3.990000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 3.990000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 4.010000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.010000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.020000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.020000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.030000] TCP: Hash tables configured (established 2048 bind 2048)
[ 4.030000] TCP: Hash tables configured (established 2048 bind 2048)
[ 4.060000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.060000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.080000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.080000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.120000] NET: Registered protocol family 1
[ 4.120000] NET: Registered protocol family 1
[ 4.140000] NET: Registered protocol family 44
[ 4.140000] NET: Registered protocol family 44
[ 4.180000] Trying to unpack rootfs image as initramfs...
[ 4.180000] Trying to unpack rootfs image as initramfs...
[ 12.970000] random: crng init done
[ 12.970000] random: crng init done
[ 75.860000] Freeing initrd memory: 9044K
[ 75.860000] Freeing initrd memory: 9044K
[ 75.910000] Key type blacklist registered
[ 75.910000] Key type blacklist registered
[ 75.940000] workingset: timestamp_bits=11 max_order=16 bucket_order=5
[ 75.940000] workingset: timestamp_bits=11 max_order=16 bucket_order=5
[ 77.000000] zbud: loaded
[ 77.000000] zbud: loaded
[ 77.180000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 77.180000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 77.210000] io scheduler mq-deadline registered
[ 77.210000] io scheduler mq-deadline registered
[ 77.690000] Console: switching to colour frame buffer device 80x32
[ 77.690000] Console: switching to colour frame buffer device 80x32
[ 77.760000] fb0: Amiga AGA frame buffer device, using 1280K of video memory
[ 77.760000] fb0: Amiga AGA frame buffer device, using 1280K of video memory
[ 77.820000] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 77.820000] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 77.840000] Amiga-builtin serial driver version 4.30
[ 77.840000] Amiga-builtin serial driver version 4.30
[ 77.870000] ttyS0 is the amiga builtin serial port
[ 77.870000] ttyS0 is the amiga builtin serial port
[ 78.030000] Zorro: Probing AutoConfig expansion devices: 3 devices
[ 78.030000] Zorro: Probing AutoConfig expansion devices: 3 devices
[ 78.040000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-0x5fffffff flags 0x0]
[ 78.040000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-0x5fffffff flags 0x0]
[ 78.120000] mousedev: PS/2 mouse device common for all mice
[ 78.120000] mousedev: PS/2 mouse device common for all mice
[ 78.150000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0
[ 78.150000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0
[ 78.220000] rtc-rp5c01 rtc-rp5c01: registered as rtc0
[ 78.220000] rtc-rp5c01 rtc-rp5c01: registered as rtc0
[ 78.240000] ledtrig-cpu: registered to indicate activity on CPUs
[ 78.240000] ledtrig-cpu: registered to indicate activity on CPUs
[ 78.280000] NET: Registered protocol family 17
[ 78.280000] NET: Registered protocol family 17
[ 78.310000] mpls_gso: MPLS GSO support
[ 78.310000] mpls_gso: MPLS GSO support
[ 78.390000] registered taskstats version 1
[ 78.390000] registered taskstats version 1
[ 78.410000] zswap: loaded using pool lzo/zbud
[ 78.410000] zswap: loaded using pool lzo/zbud
[ 78.450000] rtc-rp5c01 rtc-rp5c01: hctosys: unable to read the hardware clock
[ 78.450000] rtc-rp5c01 rtc-rp5c01: hctosys: unable to read the hardware clock
[ 78.480000] Freeing unused kernel memory: 160K
[ 78.480000] Freeing unused kernel memory: 160K
[ 78.490000] This architecture does not have kernel memory protection.
[ 78.490000] This architecture does not have kernel memory protection.
[ 78.500000] Run /init as init process
[ 78.500000] Run /init as init process
[ 104.440000] libata version 3.00 loaded.
[ 104.440000] libata version 3.00 loaded.
[ 104.810000] amiga-gayle-ide amiga-gayle-ide: Amiga Gayle IDE controller (A4000 style)
[ 104.810000] amiga-gayle-ide amiga-gayle-ide: Amiga Gayle IDE controller (A4000 style)
[ 105.510000] scsi host0: pata_gayle
[ 105.510000] scsi host0: pata_gayle
[ 105.560000] ata1: PATA max PIO4 cmd 0xdd2020 ctl 0xdd303a irq 2
[ 105.560000] ata1: PATA max PIO4 cmd 0xdd2020 ctl 0xdd303a irq 2
[ 128.950000] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [scsi_eh_0:67]
[ 128.950000] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [scsi_eh_0:67]
[ 128.950000] Modules linked in: pata_gayle libata
[ 128.950000] Modules linked in: pata_gayle libata
[ 128.950000] Format 00 Vector: 0078 PC: 002f18ca Status: 2000 Not tainted
[ 128.950000] Format 00 Vector: 0078 PC: 002f18ca Status: 2000 Not tainted
[ 128.950000] ORIG_D0: ffffffff D0: 00000001 A2: 0d55dbe0 A1: 00404ff8
[ 128.950000] ORIG_D0: ffffffff D0: 00000001 A2: 0d55dbe0 A1: 00404ff8
[ 128.950000] A0: 003fab60 D5: 00000002 D4: 00000100
[ 128.950000] A0: 003fab60 D5: 00000002 D4: 00000100
[ 128.950000] D3: 0000000a D2: 00208040 D1: 00000020
[ 128.950000] D3: 0000000a D2: 00208040 D1: 00000020
[-- Attachment #3: oldide.txt --]
[-- Type: text/plain, Size: 19389 bytes --]
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,pata_gayle,libata BOOT_IMAGE=//k
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,pata_gayle,libata BOOT_IMAGE=//k
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.250000] printk: console [tty0] enabled
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] initrd: 0f72a931 - 10000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,pata_gayle,libata BOOT_IMAGE=//k
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,pata_gayle,libata BOOT_IMAGE=//k
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] Memory: 245568K/262144K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16576K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] Console: colour dummy device 80x25
[ 0.250000] printk: console [tty0] enabled
[ 0.250000] printk: console [tty0] enabled
[ 0.510000] printk: console [ttyS0] enabled
[ 0.510000] printk: console [ttyS0] enabled
[ 0.520000] Calibrating delay loop... 111.51 BogoMIPS (lpj=557568)
[ 0.520000] Calibrating delay loop... 111.51 BogoMIPS (lpj=557568)
[ 0.620000] pid_max: default: 32768 minimum: 301
[ 0.620000] pid_max: default: 32768 minimum: 301
[ 0.640000] random: fast init done
[ 0.640000] random: fast init done
[ 0.670000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.670000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.690000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.690000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.960000] devtmpfs: initialized
[ 0.960000] devtmpfs: initialized
[ 1.060000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.060000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.090000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 1.090000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 1.150000] NET: Registered protocol family 16
[ 1.150000] NET: Registered protocol family 16
[ 2.600000] SCSI subsystem initialized
[ 2.600000] SCSI subsystem initialized
[ 2.680000] clocksource: Switched to clocksource ciab
[ 2.680000] clocksource: Switched to clocksource ciab
[ 2.720000] VFS: Disk quotas dquot_6.6.0
[ 2.720000] VFS: Disk quotas dquot_6.6.0
[ 2.730000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.730000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.910000] NET: Registered protocol family 2
[ 3.910000] NET: Registered protocol family 2
[ 3.980000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 3.980000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 4.000000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.000000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.020000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.020000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 4.030000] TCP: Hash tables configured (established 2048 bind 2048)
[ 4.030000] TCP: Hash tables configured (established 2048 bind 2048)
[ 4.050000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.050000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.070000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.070000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 4.110000] NET: Registered protocol family 1
[ 4.110000] NET: Registered protocol family 1
[ 4.120000] NET: Registered protocol family 44
[ 4.120000] NET: Registered protocol family 44
[ 4.170000] Trying to unpack rootfs image as initramfs...
[ 4.170000] Trying to unpack rootfs image as initramfs...
[ 12.960000] random: crng init done
[ 12.960000] random: crng init done
[ 75.640000] Freeing initrd memory: 9044K
[ 75.640000] Freeing initrd memory: 9044K
[ 75.700000] Key type blacklist registered
[ 75.700000] Key type blacklist registered
[ 75.730000] workingset: timestamp_bits=11 max_order=16 bucket_order=5
[ 75.730000] workingset: timestamp_bits=11 max_order=16 bucket_order=5
[ 76.780000] zbud: loaded
[ 76.780000] zbud: loaded
[ 76.950000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 76.950000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 76.980000] io scheduler mq-deadline registered
[ 76.980000] io scheduler mq-deadline registered
[ 77.460000] Console: switching to colour frame buffer device 80x32
[ 77.460000] Console: switching to colour frame buffer device 80x32
[ 77.540000] fb0: Amiga AGA frame buffer device, using 1280K of video memory
[ 77.540000] fb0: Amiga AGA frame buffer device, using 1280K of video memory
[ 77.600000] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 77.600000] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 77.620000] Amiga-builtin serial driver version 4.30
[ 77.620000] Amiga-builtin serial driver version 4.30
[ 77.650000] ttyS0 is the amiga builtin serial port
[ 77.650000] ttyS0 is the amiga builtin serial port
[ 77.810000] Zorro: Probing AutoConfig expansion devices: 3 devices
[ 77.810000] Zorro: Probing AutoConfig expansion devices: 3 devices
[ 77.820000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-0x5fffffff flags 0x0]
[ 77.820000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-0x5fffffff flags 0x0]
[ 77.900000] mousedev: PS/2 mouse device common for all mice
[ 77.900000] mousedev: PS/2 mouse device common for all mice
[ 77.930000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0
[ 77.930000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0
[ 78.000000] rtc-rp5c01 rtc-rp5c01: registered as rtc0
[ 78.000000] rtc-rp5c01 rtc-rp5c01: registered as rtc0
[ 78.020000] ledtrig-cpu: registered to indicate activity on CPUs
[ 78.020000] ledtrig-cpu: registered to indicate activity on CPUs
[ 78.040000] NET: Registered protocol family 17
[ 78.040000] NET: Registered protocol family 17
[ 78.070000] mpls_gso: MPLS GSO support
[ 78.070000] mpls_gso: MPLS GSO support
[ 78.150000] registered taskstats version 1
[ 78.150000] registered taskstats version 1
[ 78.170000] zswap: loaded using pool lzo/zbud
[ 78.170000] zswap: loaded using pool lzo/zbud
[ 78.210000] rtc-rp5c01 rtc-rp5c01: hctosys: unable to read the hardware clock
[ 78.210000] rtc-rp5c01 rtc-rp5c01: hctosys: unable to read the hardware clock
[ 78.250000] Freeing unused kernel memory: 160K
[ 78.250000] Freeing unused kernel memory: 160K
[ 78.260000] This architecture does not have kernel memory protection.
[ 78.260000] This architecture does not have kernel memory protection.
[ 78.270000] Run /init as init process
[ 78.270000] Run /init as init process
[ 102.460000] Uniform Multi-Platform E-IDE driver
[ 102.460000] Uniform Multi-Platform E-IDE driver
[ 103.120000] ide: Gayle IDE controller (A4000 style)
[ 103.120000] ide: Gayle IDE controller (A4000 style)
[ 103.140000] legacy IDE will be removed in 2021, please switch to libata
[ 103.140000] Report any missing HW support to linux-ide@vger.kernel.org
[ 103.140000] legacy IDE will be removed in 2021, please switch to libata
[ 103.140000] Report any missing HW support to linux-ide@vger.kernel.org
[ 103.160000] Probing IDE interface ide0...
[ 103.160000] Probing IDE interface ide0...
[ 103.590000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
[ 103.590000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
[ 103.740000] hda: FUJITSU MHV2160BT, ATA DISK drive
[ 103.740000] hda: FUJITSU MHV2160BT, ATA DISK drive
[ 103.960000] hdb: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
[ 103.960000] hdb: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
[ 104.180000] hdb: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
[ 104.180000] hdb: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
[ 104.640000] hdb: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
[ 104.640000] hdb: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
[ 104.860000] hdb: SONY DVD RW DW-Q28A, ATAPI CD/DVD-ROM drive
[ 104.860000] hdb: SONY DVD RW DW-Q28A, ATAPI CD/DVD-ROM drive
[ 104.890000] ide0 at 0x80dd2020 on irq 2 (serialized)
[ 104.890000] ide0 at 0x80dd2020 on irq 2 (serialized)
[ 109.010000] Z2RAM: using 0K Zorro II RAM and 512K Chip RAM (Total 512K)
[ 109.010000] Z2RAM: using 0K Zorro II RAM and 512K Chip RAM (Total 512K)
[ 132.080000] ide-gd driver 1.18
[ 132.080000] ide-gd driver 1.18
[ 132.100000] hda: max request size: 1024KiB
[ 132.100000] hda: max request size: 1024KiB
[ 152.950000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kblockd:45]
[ 152.950000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kblockd:45]
[ 152.950000] Modules linked in: ide_gd_mod(+) gayle ide_core
[ 152.950000] Modules linked in: ide_gd_mod(+) gayle ide_core
[ 152.950000] Format 00 Vector: 0078 PC: 00007c94 Status: 2200 Not tainted
[ 152.950000] Format 00 Vector: 0078 PC: 00007c94 Status: 2200 Not tainted
[ 152.950000] ORIG_D0: ffffffff D0: 00000008 A2: 0f036270 A1: 80bfe001
[ 152.950000] ORIG_D0: ffffffff D0: 00000008 A2: 0f036270 A1: 80bfe001
[ 152.950000] A0: 003d4694 D5: 00053b8a D4: 00002200
[ 152.950000] A0: 003d4694 D5: 00053b8a D4: 00002200
[ 152.950000] D3: 00000016 D2: 0f08de00 D1: 00000000
[ 152.950000] D3: 00000016 D2: 0f08de00 D1: 00000000
[ 423.530000] hda: irq timeout: status=0x50 { DriveReady SeekComplete }
[ 423.530000] hda: irq timeout: status=0x50 { DriveReady SeekComplete }
[ 423.530000] hda: possibly failed opcode: 0x91
[ 423.530000] hda: possibly failed opcode: 0x91
Failed to wait for daemon to reply: Connection timed out
[ 423.960000] hda: Host Protected Area detected.
[ 423.960000] current capacity is 312581808 sectors (160041 MB)
[ 423.960000] native capacity is 70365510369088 sectors (36027141308 MB)
[ 423.960000] hda: Host Protected Area detected.
[ 423.960000] current capacity is 312581808 sectors (160041 MB)
[ 423.960000] native capacity is 70365510369088 sectors (36027141308 MB)
[ 423.980000] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 423.980000] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 448.960000] watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [init:74]
[ 448.960000] watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [init:74]
[ 448.960000] Modules linked in: cdrom ide_gd_mod(+) gayle ide_core
[ 448.960000] Modules linked in: cdrom ide_gd_mod(+) gayle ide_core
[ 448.960000] Format 00 Vector: 0078 PC: 00053c0c Status: 2200 Tainted: G L
[ 448.960000] Format 00 Vector: 0078 PC: 00053c0c Status: 2200 Tainted: G L
[ 448.960000] ORIG_D0: ffffffff D0: 00002200 A2: 0d55f620 A1: 80bfe001
[ 448.960000] ORIG_D0: ffffffff D0: 00002200 A2: 0d55f620 A1: 80bfe001
[ 448.960000] A0: 003d4694 D5: 00053b8a D4: 00000002
[ 448.960000] A0: 003d4694 D5: 00053b8a D4: 00000002
[ 448.960000] D3: 00000000 D2: 00000001 D1: 00000000
[ 448.960000] D3: 00000000 D2: 00000001 D1: 00000000
[ 655.890000] hda: irq timeout: status=0x50 { DriveReady SeekComplete }
[ 655.890000] hda: irq timeout: status=0x50 { DriveReady SeekComplete }
[ 655.890000] hda: possibly failed opcode: 0xc6
[ 655.890000] hda: possibly failed opcode: 0xc6
[ 655.940000] hda: cache flushes supported
[ 655.940000] hda: cache flushes supported
[ 656.480000] hda: RDSK (512) hda1 (DOS^C)(res 2 spb 8) hda2 (DOS^C)(res 2 spb 8) hda3 (UNI^A)(res 2 spb 8) hda4 (NBR^G)(res 0 spb 1) hda5 (UNI^A)(res 2 spb 8) hda6 (NBS^A)()
[ 656.480000] hda: RDSK (512) hda1 (DOS^C)(res 2 spb 8) hda2 (DOS^C)(res 2 spb 8) hda3 (UNI^A)(res 2 spb 8) hda4 (NBR^G)(res 0 spb 1) hda5 (UNI^A)(res 2 spb 8) hda6 (NBS^A)()
[ 680.960000] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1H:73]
[ 680.960000] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1H:73]
[ 680.960000] Modules linked in: cdrom ide_gd_mod(+) gayle ide_core
[ 680.960000] Modules linked in: cdrom ide_gd_mod(+) gayle ide_core
[ 680.960000] Format 00 Vector: 0078 PC: 00007c94 Status: 2200 Tainted: G L
[ 680.960000] Format 00 Vector: 0078 PC: 00007c94 Status: 2200 Tainted: G L
[ 680.960000] ORIG_D0: ffffffff D0: 00000008 A2: 0d559a40 A1: 80bfe001
[ 680.960000] ORIG_D0: ffffffff D0: 00000008 A2: 0d559a40 A1: 80bfe001
[ 680.960000] A0: 003d4694 D5: 00053b8a D4: 00002200
[ 680.960000] A0: 003d4694 D5: 00053b8a D4: 00002200
[ 680.960000] D3: 00000016 D2: 0d67de00 D1: 00000000
[ 680.960000] D3: 00000016 D2: 0d67de00 D1: 00000000
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BigRAMPlus seems to be detected now
2020-03-08 10:36 ` Geert Uytterhoeven
2020-03-10 2:51 ` Stefan Reinauer
@ 2020-03-10 3:06 ` Stefan Reinauer
2020-03-10 8:15 ` Geert Uytterhoeven
1 sibling, 1 reply; 8+ messages in thread
From: Stefan Reinauer @ 2020-03-10 3:06 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: John Paul Adrian Glaubitz, linux-m68k, Debian m68k
[-- Attachment #1: Type: text/plain, Size: 320 bytes --]
On Sun, Mar 8, 2020 at 3:43 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> As well as trying to boot it with the BRP as primary memory (BRP first
> in memfile) or sole memory (motherboard RAM disabled in memfile).
With BigramPlus as sole memory the system can't seem to deal with the
initramfs (see log)
Stefan
[-- Attachment #2: noram.txt --]
[-- Type: text/plain, Size: 24819 bytes --]
ABCDGHIJK
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] On node 1 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0072a931 - 01000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 68952
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 261724K/278528K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16804K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: Unable to allocate memory from node 0
[ 0.000000] SLUB: Allocating a useless per node structure in order to be able to continue
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] On node 1 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0072a931 - 01000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 68952
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 261724K/278528K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16804K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: Unable to allocate memory from node 0
[ 0.000000] SLUB: Allocating a useless per node structure in order to be able to continue
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.330000] printk: console [tty0] enabled
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] Linux version 5.3.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 Debian 5.3.9-3 (2019-11-19)
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] printk: console [debug0] enabled
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] On node 1 totalpages: 65536
[ 0.000000] On node 1 totalpages: 65536
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 640 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] initrd: 0072a931 - 01000000
[ 0.000000] initrd: 0072a931 - 01000000
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 68952
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 68952
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Kernel command line: root=/dev/ram video=amifb:pal-lace debug=ser console=tty0 console=ttyS0 fb=false modprobe.blacklist=amiflop,gayle BOOT_IMAGE=//kernels/vmlik
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 261724K/278528K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16804K reserved, 0K cma-reserved)
[ 0.000000] Memory: 261724K/278528K available (3026K kernel code, 395K rwdata, 856K rodata, 160K init, 203K bss, 16804K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x45a with crng_init=0
[ 0.000000] SLUB: Unable to allocate memory from node 0
[ 0.000000] SLUB: Unable to allocate memory from node 0
[ 0.000000] SLUB: Allocating a useless per node structure in order to be able to continue
[ 0.000000] SLUB: Allocating a useless per node structure in order to be able to continue
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] NR_IRQS: 200
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.000000] clocksource: ciab: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2669697470866 ns
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] Console: colour dummy device 80x25
[ 0.330000] printk: console [tty0] enabled
[ 0.330000] printk: console [tty0] enabled
[ 0.640000] printk: console [ttyS0] enabled
[ 0.640000] printk: console [ttyS0] enabled
[ 0.650000] Calibrating delay loop... 112.53 BogoMIPS (lpj=562688)
[ 0.650000] Calibrating delay loop... 112.53 BogoMIPS (lpj=562688)
[ 0.750000] pid_max: default: 32768 minimum: 301
[ 0.750000] pid_max: default: 32768 minimum: 301
[ 0.760000] random: fast init done
[ 0.760000] random: fast init done
[ 0.790000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.790000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.800000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.800000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 1.090000] devtmpfs: initialized
[ 1.090000] devtmpfs: initialized
[ 1.300000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.300000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.310000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 1.310000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 1.410000] NET: Registered protocol family 16
[ 1.410000] NET: Registered protocol family 16
[ 3.580000] SCSI subsystem initialized
[ 3.580000] SCSI subsystem initialized
[ 3.770000] clocksource: Switched to clocksource ciab
[ 3.770000] clocksource: Switched to clocksource ciab
[ 3.850000] VFS: Disk quotas dquot_6.6.0
[ 3.850000] VFS: Disk quotas dquot_6.6.0
[ 3.870000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.870000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.580000] NET: Registered protocol family 2
[ 5.580000] NET: Registered protocol family 2
[ 5.710000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.710000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.720000] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.720000] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.730000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.730000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.740000] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.740000] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.760000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.760000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.780000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.780000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.830000] NET: Registered protocol family 1
[ 5.830000] NET: Registered protocol family 1
[ 5.850000] NET: Registered protocol family 44
[ 5.850000] NET: Registered protocol family 44
[ 5.940000] Trying to unpack rootfs image as initramfs...
[ 5.940000] Trying to unpack rootfs image as initramfs...
[ 5.950000] Initramfs unpacking failed: invalid magic at start of compressed archive
[ 5.950000] Initramfs unpacking failed: invalid magic at start of compressed archive
[ 8.420000] Freeing initrd memory: 9044K
[ 8.420000] Freeing initrd memory: 9044K
[ 8.470000] kernel BUG at mm/slub.c:3952!
[ 8.470000] kernel BUG at mm/slub.c:3952!
[ 8.480000] *** TRAP #7 *** FORMAT=0
[ 8.480000] *** TRAP #7 *** FORMAT=0
[ 8.500000] Current process id is 1
[ 8.500000] Current process id is 1
[ 8.510000] BAD KERNEL TRAP: 00000000
[ 8.510000] BAD KERNEL TRAP: 00000000
[ 8.530000] Modules linked in:
[ 8.530000] Modules linked in:
[ 8.550000] PC: [<000d6bfe>] kfree+0x98/0x19a
[ 8.550000] PC: [<000d6bfe>] kfree+0x98/0x19a
[ 8.560000] SR: 2000 SP: (ptrval) a2: 58c32df0
[ 8.560000] SR: 2000 SP: (ptrval) a2: 58c32df0
[ 8.570000] d0: 0000001d d1: 00000000 d2: 00000019 d3: 0026ce60
[ 8.570000] d0: 0000001d d1: 00000000 d2: 00000019 d3: 0026ce60
[ 8.590000] d4: 58cbfe20 d5: 002e23a0 a0: 003d9b60 a1: 58c18fa0
[ 8.590000] d4: 58cbfe20 d5: 002e23a0 a0: 003d9b60 a1: 58c18fa0
[ 8.600000] Process swapper (pid: 1, task=(ptrval))
[ 8.600000] Process swapper (pid: 1, task=(ptrval))
[ 8.610000] Frame format=0
[ 8.610000] Frame format=0
[ 8.620000] Stack from 58c39e70:
[ 8.620000] 003728f8 00383e29 00000f70 00000000 0026ce60 58cbfe20 000d6b66 58c1e000
[ 8.620000] 003fab20 0026c8b6 002e2730 58cbfe20 58cc3008 00000000 0003fdf8 00002096
[ 8.620000] 00000000 00000000 58cc3000 003e3d84 00450ba4 58c39f90 00002096 002e29e4
[ 8.620000] 58cc3008 00000000 00000000 002e2064 58cc3008 00000000 00000000 58cc3008
[ 8.620000] 001eb588 58cc3000 003e3d84 00000000 58c0f900 0045864c 00450ba4 58c39f90
[ 8.620000] 001eb892 003e3d84 0000005b 0043c45c 0043c46a 003e3d84 00000000 000020f0
[ 8.620000] Stack from 58c39e70:
[ 8.620000] 003728f8 00383e29 00000f70 00000000 0026ce60 58cbfe20 000d6b66 58c1e000
[ 8.620000] 003fab20 0026c8b6 002e2730 58cbfe20 58cc3008 00000000 0003fdf8 00002096
[ 8.620000] 00000000 00000000 58cc3000 003e3d84 00450ba4 58c39f90 00002096 002e29e4
[ 8.620000] 58cc3008 00000000 00000000 002e2064 58cc3008 00000000 00000000 58cc3008
[ 8.620000] 001eb588 58cc3000 003e3d84 00000000 58c0f900 0045864c 00450ba4 58c39f90
[ 8.620000] 001eb892 003e3d84 0000005b 0043c45c 0043c46a 003e3d84 00000000 000020f0
[ 8.660000] Call Trace: [<0026ce60>] netlink_broadcast+0x0/0x24
[ 8.660000] Call Trace: [<0026ce60>] netlink_broadcast+0x0/0x24
[ 8.680000] [<000d6b66>] kfree+0x0/0x19a
[ 8.680000] [<000d6b66>] kfree+0x0/0x19a
[ 8.690000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 8.690000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 8.700000] [<002e2730>] kobject_uevent_env+0x250/0x4f4
[ 8.700000] [<002e2730>] kobject_uevent_env+0x250/0x4f4
[ 8.720000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 8.720000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 8.730000] [<00002096>] do_one_initcall+0x0/0x184
[ 8.730000] [<00002096>] do_one_initcall+0x0/0x184
[ 8.740000] [<00002096>] do_one_initcall+0x0/0x184
[ 8.740000] [<00002096>] do_one_initcall+0x0/0x184
[ 8.760000] [<002e29e4>] kobject_uevent+0x10/0x16
[ 8.760000] [<002e29e4>] kobject_uevent+0x10/0x16
[ 8.770000] [<002e2064>] kset_register+0x2a/0x38
[ 8.770000] [<002e2064>] kset_register+0x2a/0x38
[ 8.780000] [<001eb588>] bus_register+0x80/0x208
[ 8.780000] [<001eb588>] bus_register+0x80/0x208
[ 8.790000] [<001eb892>] subsys_system_register+0x16/0x34
[ 8.790000] [<001eb892>] subsys_system_register+0x16/0x34
[ 8.810000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 8.810000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 8.820000] [<0043c46a>] init_clocksource_sysfs+0xe/0x24
[ 8.820000] [<0043c46a>] init_clocksource_sysfs+0xe/0x24
[ 8.830000] [<000020f0>] do_one_initcall+0x5a/0x184
[ 8.830000] [<000020f0>] do_one_initcall+0x5a/0x184
[ 8.840000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 8.840000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 8.860000] [<00002096>] do_one_initcall+0x0/0x184
[ 8.860000] [<00002096>] do_one_initcall+0x0/0x184
[ 8.870000] [<002eaf46>] strcpy+0x0/0x1c
[ 8.870000] [<002eaf46>] strcpy+0x0/0x1c
[ 8.880000] [<00060006>] ntp_notify_cmos_timer+0x0/0x28
[ 8.880000] [<00060006>] ntp_notify_cmos_timer+0x0/0x28
[ 8.900000] [<0043409c>] kernel_init_freeable+0xe4/0x18c
[ 8.900000] [<0043409c>] kernel_init_freeable+0xe4/0x18c
[ 8.910000] [<002eaf46>] strcpy+0x0/0x1c
[ 8.910000] [<002eaf46>] strcpy+0x0/0x1c
[ 8.930000] [<00434138>] kernel_init_freeable+0x180/0x18c
[ 8.930000] [<00434138>] kernel_init_freeable+0x180/0x18c
[ 8.950000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 8.950000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 8.960000] [<002f0dde>] kernel_init+0x0/0xd2
[ 8.960000] [<002f0dde>] kernel_init+0x0/0xd2
[ 8.980000] [<002f0de6>] kernel_init+0x8/0xd2
[ 8.980000] [<002f0de6>] kernel_init+0x8/0xd2
[ 8.990000] [<002f0dde>] kernel_init+0x0/0xd2
[ 8.990000] [<002f0dde>] kernel_init+0x0/0xd2
[ 9.000000] [<00002934>] ret_from_kernel_thread+0xc/0x14
[ 9.000000] [<00002934>] ret_from_kernel_thread+0xc/0x14
[ 9.010000] Code: 3e29 4879 0037 28f8 4eb9 0005 3262 4e47 <2213> e9c1 03c1 6706 4280 102b 0031 2f00 2f0b 4eb9 000c 93de 508f 4cdf 781c 4e75
[ 9.010000] Code: 3e29 4879 0037 28f8 4eb9 0005 3262 4e47 <2213> e9c1 03c1 6706 4280 102b 0031 2f00 2f0b 4eb9 000c 93de 508f 4cdf 781c 4e75
[ 9.020000] Disabling lock debugging due to kernel taint
[ 9.020000] Disabling lock debugging due to kernel taint
[ 9.040000] ------------[ cut here ]------------
[ 9.040000] ------------[ cut here ]------------
[ 9.050000] WARNING: CPU: 0 PID: 1 at mm/slab.h:409 kmem_cache_free+0xa2/0x230
[ 9.050000] WARNING: CPU: 0 PID: 1 at mm/slab.h:409 kmem_cache_free+0xa2/0x230
[ 9.070000] virt_to_cache: Object is not a Slab page!
[ 9.070000] virt_to_cache: Object is not a Slab page!
[ 9.080000] Modules linked in:
[ 9.080000] Modules linked in:
[ 9.100000] CPU: 0 PID: 1 Comm: swapper Tainted: G D 5.3.0-2-m68k #1 Debian 5.3.9-3
[ 9.100000] CPU: 0 PID: 1 Comm: swapper Tainted: G D 5.3.0-2-m68k #1 Debian 5.3.9-3
[ 9.120000] Stack from 58c39cfc:
[ 9.120000] 58c39cfc 0037ec35 0002ce12 00000019 00000000 00000000 002e23a0 58c68800
[ 9.120000] 00744678 58c29c00 0002ca5e 0038442c 00000199 000d699e 00000009 00000000
[ 9.120000] 58c39d40 0038440c 58c39d5c 002f1e2e 000d699e 0038442c 00000199 0038440c
[ 9.120000] 002fe688 00000004 00000000 00000000 002e23a0 58c29c00 58c29c14 000e2034
[ 9.120000] 000fa458 58c14300 58c29c00 000000ff 00000001 0000000b 58c32df0 00000000
[ 9.120000] 58cbfe20 58c39de4 0002e748 58c29c00 58c32df0 58c32df0 00000024 000000c0
[ 9.120000] Stack from 58c39cfc:
[ 9.120000] 58c39cfc 0037ec35 0002ce12 00000019 00000000 00000000 002e23a0 58c68800
[ 9.120000] 00744678 58c29c00 0002ca5e 0038442c 00000199 000d699e 00000009 00000000
[ 9.120000] 58c39d40 0038440c 58c39d5c 002f1e2e 000d699e 0038442c 00000199 0038440c
[ 9.120000] 002fe688 00000004 00000000 00000000 002e23a0 58c29c00 58c29c14 000e2034
[ 9.120000] 000fa458 58c14300 58c29c00 000000ff 00000001 0000000b 58c32df0 00000000
[ 9.120000] 58cbfe20 58c39de4 0002e748 58c29c00 58c32df0 58c32df0 00000024 000000c0
[ 9.150000] Call Trace: [<0002ce12>] __warn+0xc0/0xc2
[ 9.150000] Call Trace: [<0002ce12>] __warn+0xc0/0xc2
[ 9.160000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.160000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.170000] [<0002ca5e>] warn_slowpath_fmt+0x2e/0x36
[ 9.170000] [<0002ca5e>] warn_slowpath_fmt+0x2e/0x36
[ 9.180000] [<000d699e>] kmem_cache_free+0xa2/0x230
[ 9.180000] [<000d699e>] kmem_cache_free+0xa2/0x230
[ 9.190000] [<002f1e2e>] _cond_resched+0x0/0x2a
[ 9.190000] [<002f1e2e>] _cond_resched+0x0/0x2a
[ 9.210000] [<000d699e>] kmem_cache_free+0xa2/0x230
[ 9.210000] [<000d699e>] kmem_cache_free+0xa2/0x230
[ 9.220000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.220000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.230000] [<000e2034>] filp_close+0x0/0x70
[ 9.230000] [<000e2034>] filp_close+0x0/0x70
[ 9.240000] [<000fa458>] put_files_struct+0x88/0x90
[ 9.240000] [<000fa458>] put_files_struct+0x88/0x90
[ 9.260000] [<0002e748>] do_exit+0x2ea/0x80c
[ 9.260000] [<0002e748>] do_exit+0x2ea/0x80c
[ 9.270000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.270000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.280000] [<00053262>] printk+0x0/0x18
[ 9.280000] [<00053262>] printk+0x0/0x18
[ 9.290000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 9.290000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 9.310000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 9.310000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 9.320000] [<00005340>] die_if_kernel+0x52/0x56
[ 9.320000] [<00005340>] die_if_kernel+0x52/0x56
[ 9.330000] [<00005f2e>] bad_super_trap+0x12e/0x14c
[ 9.330000] [<00005f2e>] bad_super_trap+0x12e/0x14c
[ 9.350000] [<0026ce60>] netlink_broadcast+0x0/0x24
[ 9.350000] [<0026ce60>] netlink_broadcast+0x0/0x24
[ 9.360000] [<00002910>] trap+0x20/0x28
[ 9.360000] [<00002910>] trap+0x20/0x28
[ 9.370000] [<0026ce60>] netlink_broadcast+0x0/0x24
[ 9.370000] [<0026ce60>] netlink_broadcast+0x0/0x24
[ 9.380000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.380000] [<002e23a0>] alloc_uevent_skb+0x0/0xa0
[ 9.390000] [<0026ce60>] netlink_broadcast+0x0/0x24
[ 9.390000] [<0026ce60>] netlink_broadcast+0x0/0x24
[ 9.410000] [<000d6b66>] kfree+0x0/0x19a
[ 9.410000] [<000d6b66>] kfree+0x0/0x19a
[ 9.420000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 9.420000] [<0026c8b6>] netlink_has_listeners+0x0/0x76
[ 9.430000] [<002e2730>] kobject_uevent_env+0x250/0x4f4
[ 9.430000] [<002e2730>] kobject_uevent_env+0x250/0x4f4
[ 9.450000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 9.450000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 9.460000] [<00002096>] do_one_initcall+0x0/0x184
[ 9.460000] [<00002096>] do_one_initcall+0x0/0x184
[ 9.470000] [<00002096>] do_one_initcall+0x0/0x184
[ 9.470000] [<00002096>] do_one_initcall+0x0/0x184
[ 9.490000] [<002e29e4>] kobject_uevent+0x10/0x16
[ 9.490000] [<002e29e4>] kobject_uevent+0x10/0x16
[ 9.500000] [<002e2064>] kset_register+0x2a/0x38
[ 9.500000] [<002e2064>] kset_register+0x2a/0x38
[ 9.510000] [<001eb588>] bus_register+0x80/0x208
[ 9.510000] [<001eb588>] bus_register+0x80/0x208
[ 9.520000] [<001eb892>] subsys_system_register+0x16/0x34
[ 9.520000] [<001eb892>] subsys_system_register+0x16/0x34
[ 9.540000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 9.540000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 9.550000] [<0043c46a>] init_clocksource_sysfs+0xe/0x24
[ 9.550000] [<0043c46a>] init_clocksource_sysfs+0xe/0x24
[ 9.570000] [<000020f0>] do_one_initcall+0x5a/0x184
[ 9.570000] [<000020f0>] do_one_initcall+0x5a/0x184
[ 9.590000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 9.590000] [<0003fdf8>] parse_args+0x0/0x2c8
[ 9.600000] [<00002096>] do_one_initcall+0x0/0x184
[ 9.600000] [<00002096>] do_one_initcall+0x0/0x184
[ 9.610000] [<002eaf46>] strcpy+0x0/0x1c
[ 9.610000] [<002eaf46>] strcpy+0x0/0x1c
[ 9.620000] [<00060006>] ntp_notify_cmos_timer+0x0/0x28
[ 9.620000] [<00060006>] ntp_notify_cmos_timer+0x0/0x28
[ 9.640000] [<0043409c>] kernel_init_freeable+0xe4/0x18c
[ 9.640000] [<0043409c>] kernel_init_freeable+0xe4/0x18c
[ 9.660000] [<002eaf46>] strcpy+0x0/0x1c
[ 9.660000] [<002eaf46>] strcpy+0x0/0x1c
[ 9.670000] [<00434138>] kernel_init_freeable+0x180/0x18c
[ 9.670000] [<00434138>] kernel_init_freeable+0x180/0x18c
[ 9.690000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 9.690000] [<0043c45c>] init_clocksource_sysfs+0x0/0x24
[ 9.700000] [<002f0dde>] kernel_init+0x0/0xd2
[ 9.700000] [<002f0dde>] kernel_init+0x0/0xd2
[ 9.720000] [<002f0de6>] kernel_init+0x8/0xd2
[ 9.720000] [<002f0de6>] kernel_init+0x8/0xd2
[ 9.730000] [<002f0dde>] kernel_init+0x0/0xd2
[ 9.730000] [<002f0dde>] kernel_init+0x0/0xd2
[ 9.740000] [<00002934>] ret_from_kernel_thread+0xc/0x14
[ 9.740000] [<00002934>] ret_from_kernel_thread+0xc/0x14
[ 9.750000] ---[ end trace f25bbda512b045f1 ]---
[ 9.750000] ---[ end trace f25bbda512b045f1 ]---
[ 9.770000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 9.770000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 9.770000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
[ 9.770000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BigRAMPlus seems to be detected now
2020-03-10 3:06 ` Stefan Reinauer
@ 2020-03-10 8:15 ` Geert Uytterhoeven
2020-03-31 5:07 ` Stefan Reinauer
0 siblings, 1 reply; 8+ messages in thread
From: Geert Uytterhoeven @ 2020-03-10 8:15 UTC (permalink / raw)
To: Stefan Reinauer; +Cc: John Paul Adrian Glaubitz, linux-m68k, Debian m68k
Hi Stefan,
On Tue, Mar 10, 2020 at 4:06 AM Stefan Reinauer
<stefan.k.reinauer@gmail.com> wrote:
> On Sun, Mar 8, 2020 at 3:43 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > As well as trying to boot it with the BRP as primary memory (BRP first
> > in memfile) or sole memory (motherboard RAM disabled in memfile).
>
> With BigramPlus as sole memory the system can't seem to deal with the
> initramfs (see log)
However, according to this log you have both enabled:
> On node 0 totalpages: 4096
> DMA zone: 40 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4096 pages, LIFO batch:0
16 MiB
> On node 1 totalpages: 65536
> DMA zone: 640 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 65536 pages, LIFO batch:15
256 MiB
> SLUB: Unable to allocate memory from node 0
> SLUB: Allocating a useless per node structure in order to be able to continue
> SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
Probably the 16 MiB in the first chunk is too small to allocate
page tables from, especially if it contains the initramfs.
What happens if you put the BRP first in the memfile?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BigRAMPlus seems to be detected now
2020-03-10 8:15 ` Geert Uytterhoeven
@ 2020-03-31 5:07 ` Stefan Reinauer
2020-03-31 7:02 ` Geert Uytterhoeven
0 siblings, 1 reply; 8+ messages in thread
From: Stefan Reinauer @ 2020-03-31 5:07 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: John Paul Adrian Glaubitz, linux-m68k, Debian m68k
On Tue, Mar 10, 2020 at 1:15 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Stefan,
>
> On Tue, Mar 10, 2020 at 4:06 AM Stefan Reinauer
> <stefan.k.reinauer@gmail.com> wrote:
> > On Sun, Mar 8, 2020 at 3:43 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > As well as trying to boot it with the BRP as primary memory (BRP first
> > > in memfile) or sole memory (motherboard RAM disabled in memfile).
> >
> > With BigramPlus as sole memory the system can't seem to deal with the
> > initramfs (see log)
>
> However, according to this log you have both enabled:
>
> > On node 0 totalpages: 4096
> > DMA zone: 40 pages used for memmap
> > DMA zone: 0 pages reserved
> > DMA zone: 4096 pages, LIFO batch:0
>
> 16 MiB
>
> > On node 1 totalpages: 65536
> > DMA zone: 640 pages used for memmap
> > DMA zone: 0 pages reserved
> > DMA zone: 65536 pages, LIFO batch:15
>
> 256 MiB
>
> > SLUB: Unable to allocate memory from node 0
> > SLUB: Allocating a useless per node structure in order to be able to continue
> > SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
>
> Probably the 16 MiB in the first chunk is too small to allocate
> page tables from, especially if it contains the initramfs.
>
> What happens if you put the BRP first in the memfile?
Before chipram?
---------------------------------
0x50000000 268435456
2097152
---------------------------------
[ 0.000000] Linux version 5.4.0-4-m68k
(debian-kernel@lists.debian.org) (gcc version 9.2.1 20200203 (Debian
9.2.1-28)) #1 Debian 5.4)
[ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO
FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAU
[ 0.000000] initrd: 008517bf - 01000000
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 68952
[..]
[ 53.910000] Run /init as init process
[ 53.940000] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000004
[ 53.940000] CPU: 0 PID: 1 Comm: init Not tainted 5.4.0-4-m68k #1
Debian 5.4.19-1
[ 53.940000] Stack from 00821e38:
[ 53.940000] 00821e38 00377373 0002c276 000000ff 00000001
400004d8 0081c000 00000004
[ 53.940000] 00820000 0000000c 00821ea4 0002db40 0036f405
00000004 00000004 00000001
[ 53.940000] 400004d8 0003477c 00032732 008272dc 00821f6c
00821f80 00828f60 00000000
[ 53.940000] 00000000 000000cd 00000000 008dc150 0002e182
00000004 00000003 000350fe
[ 53.940000] 00000004 0000007c 00000000 00000000 00000000
00000001 00000000 00821fcc
[ 53.940000] 00821f6c 00820000 00821fa4 008272a0 00002be2
00820007 000042f2 00821f6c
[ 53.940000] Call Trace: [<0002c276>] panic+0xc4/0x296
[ 53.940000] [<0002db40>] do_exit+0x142/0x70e
[ 53.940000] [<0003477c>] do_signal_stop+0x0/0x142
[ 53.940000] [<00032732>] __list_del_entry+0x0/0x24
[ 53.940000] [<0002e182>] do_group_exit+0x48/0x80
[ 53.940000] [<000350fe>] get_signal+0x124/0x490
[ 53.940000] [<00002be2>] do_IRQ+0x26/0x32
[ 53.940000] [<000042f2>] do_notify_resume+0x32/0x4d4
[ 53.940000] [<002e099e>] kernel_init+0x0/0xd2
[ 53.940000] [<00034fb4>] force_sig_fault_to_task+0x30/0x3c
[ 53.940000] [<00002a64>] do_signal_return+0x10/0x1a
[ 53.940000] [<002e099e>] kernel_init+0x0/0xd2
[ 53.940000] [<0000c000>] apollo_irq_eoi+0x10/0x24
[ 53.940000] ---[ end Kernel panic - not syncing: Attempted to kill
init! exitcode=0x00000004 ]---
This one works:
---------------------------------
2097152
0x50000000 268435456
0x07000000 16777216
---------------------------------
Same as only using the bigram (and I got into the OS just fine, but I
had to do the installation through qemu)
I also did some tests, and had Amiga Test Kit running over night,
which couldn't find anything wrong with the onboard fast ram.
Stefan
> Thanks!
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BigRAMPlus seems to be detected now
2020-03-31 5:07 ` Stefan Reinauer
@ 2020-03-31 7:02 ` Geert Uytterhoeven
0 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2020-03-31 7:02 UTC (permalink / raw)
To: Stefan Reinauer; +Cc: John Paul Adrian Glaubitz, linux-m68k, Debian m68k
Hi Stefan,
On Tue, Mar 31, 2020 at 7:07 AM Stefan Reinauer
<stefan.k.reinauer@gmail.com> wrote:
> On Tue, Mar 10, 2020 at 1:15 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > On Tue, Mar 10, 2020 at 4:06 AM Stefan Reinauer
> > <stefan.k.reinauer@gmail.com> wrote:
> > > On Sun, Mar 8, 2020 at 3:43 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > > As well as trying to boot it with the BRP as primary memory (BRP first
> > > > in memfile) or sole memory (motherboard RAM disabled in memfile).
> > >
> > > With BigramPlus as sole memory the system can't seem to deal with the
> > > initramfs (see log)
> >
> > However, according to this log you have both enabled:
> >
> > > On node 0 totalpages: 4096
> > > DMA zone: 40 pages used for memmap
> > > DMA zone: 0 pages reserved
> > > DMA zone: 4096 pages, LIFO batch:0
> >
> > 16 MiB
> >
> > > On node 1 totalpages: 65536
> > > DMA zone: 640 pages used for memmap
> > > DMA zone: 0 pages reserved
> > > DMA zone: 65536 pages, LIFO batch:15
> >
> > 256 MiB
> >
> > > SLUB: Unable to allocate memory from node 0
> > > SLUB: Allocating a useless per node structure in order to be able to continue
> > > SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
> >
> > Probably the 16 MiB in the first chunk is too small to allocate
> > page tables from, especially if it contains the initramfs.
> >
> > What happens if you put the BRP first in the memfile?
>
> Before chipram?
> ---------------------------------
> 0x50000000 268435456
> 2097152
No, as the first FastRAM chunk.
ChipRAM must always be first ;-)
> This one works:
> ---------------------------------
> 2097152
> 0x50000000 268435456
> 0x07000000 16777216
> ---------------------------------
OK, that's what I meant.
> Same as only using the bigram (and I got into the OS just fine, but I
> had to do the installation through qemu)
Yeah, that won't make much of a difference, as it may take a while
before it actually starts using the on-board RAM.
Does the initramfs start working if you restrict the amount of RAM used,
by adding e.g. mem=16M or mem=64M to the kernel command line?
If there is a limitation on memory size somewhere in the code, that may
help identifying it.
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BigRAMPlus seems to be detected now
2020-03-07 21:00 BigRAMPlus seems to be detected now John Paul Adrian Glaubitz
2020-03-08 10:36 ` Geert Uytterhoeven
@ 2021-01-15 19:07 ` John Paul Adrian Glaubitz
1 sibling, 0 replies; 8+ messages in thread
From: John Paul Adrian Glaubitz @ 2021-01-15 19:07 UTC (permalink / raw)
To: linux-m68k; +Cc: Debian m68k
Hi!
On 3/7/20 10:00 PM, John Paul Adrian Glaubitz wrote:
> Hi!
>
> There is one user in the #debian-68k IRC channel who has tried installing Debian
> on his A4000 with a A3660 and a BigRAMPlus installed and while the user is currently
> running into problems with the kernel being stuck, to my surprise, the kernel seems
> to be able to use and detect the extra memory from the BigRAMPlus (see below).
>
> The kernel is reporting an address conflict though:
>
> [ 6.140000] Zorro: Probing AutoConfig expansion devices: 3 devices
> [ 6.150000] zorro: Address space collision on device Zorro device 12128600 (Individual Computers) [??? 0x50000000-]
>
> The question whether the lock up is caused by the BRP. But since this Amiga has only
> 16 MB FAST RAM, the user hasn't tested to boot without the BRP yet.
>
> I will dig out my BRP tomorrow and see if it's actually detected in my A4000
> as well with current kernel versions.
So, it turned out that with "tomorrow" I meant "almost one year later". I found
my BigRAMPlus now and my Amiga 4000 is up and running at home now - except I'm
not home at the moment.
Depending on how the Covid-19 situation develops the next days, I will be back
home and install the BigRAMPlus and verify whether it can be used as RAM these
days now.
Would be great to have 384 MB RAM in my Amiga 4000 ;).
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-01-15 19:08 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-07 21:00 BigRAMPlus seems to be detected now John Paul Adrian Glaubitz
2020-03-08 10:36 ` Geert Uytterhoeven
2020-03-10 2:51 ` Stefan Reinauer
2020-03-10 3:06 ` Stefan Reinauer
2020-03-10 8:15 ` Geert Uytterhoeven
2020-03-31 5:07 ` Stefan Reinauer
2020-03-31 7:02 ` Geert Uytterhoeven
2021-01-15 19:07 ` John Paul Adrian Glaubitz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.