From: Zong Li <zong.li@sifive.com>
To: mturquette@baylibre.com, sboyd@kernel.org, palmer@dabbelt.com,
paul.walmsley@sifive.com, lee.jones@linaro.org,
robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Zong Li <zong.li@sifive.com>, Palmer Dabbelt <palmer@rivosinc.com>
Subject: [PATCH v2 3/5] riscv: dts: Change the macro name of prci in each device node
Date: Fri, 4 Mar 2022 18:03:19 +0800 [thread overview]
Message-ID: <db92d209fa700f7da8bc8028083476fcc138d80e.1646388139.git.zong.li@sifive.com> (raw)
In-Reply-To: <cover.1646388139.git.zong.li@sifive.com>
We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 22 +++++++++---------
arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 26 +++++++++++-----------
2 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 3eef52b1a59b..aad45d7f498f 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -164,7 +164,7 @@ uart0: serial@10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <4>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
dma: dma@3000000 {
@@ -180,7 +180,7 @@ uart1: serial@10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <5>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
i2c0: i2c@10030000 {
@@ -188,7 +188,7 @@ i2c0: i2c@10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <50>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -201,7 +201,7 @@ qspi0: spi@10040000 {
<0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <51>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -212,7 +212,7 @@ qspi1: spi@10041000 {
<0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -222,7 +222,7 @@ qspi2: spi@10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <6>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -235,8 +235,8 @@ eth0: ethernet@10090000 {
<0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU540_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -246,7 +246,7 @@ pwm0: pwm@10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <42>, <43>, <44>, <45>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -255,7 +255,7 @@ pwm1: pwm@10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <46>, <47>, <48>, <49>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -281,7 +281,7 @@ gpio: gpio@10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index 8464b0e3c887..7b77c13496d8 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -166,7 +166,7 @@ uart0: serial@10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <39>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
uart1: serial@10011000 {
@@ -174,7 +174,7 @@ uart1: serial@10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <40>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
i2c0: i2c@10030000 {
@@ -182,7 +182,7 @@ i2c0: i2c@10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -194,7 +194,7 @@ i2c1: i2c@10031000 {
reg = <0x0 0x10031000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <53>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -207,7 +207,7 @@ qspi0: spi@10040000 {
<0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <41>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -218,7 +218,7 @@ qspi1: spi@10041000 {
<0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <42>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -228,7 +228,7 @@ spi0: spi@10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <43>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -241,8 +241,8 @@ eth0: ethernet@10090000 {
<0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU740_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -252,7 +252,7 @@ pwm0: pwm@10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <44>, <45>, <46>, <47>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -261,7 +261,7 @@ pwm1: pwm@10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <48>, <49>, <50>, <51>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -287,7 +287,7 @@ gpio: gpio@10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
pcie@e00000000 {
@@ -316,7 +316,7 @@ pcie@e00000000 {
<0x0 0x0 0x0 0x3 &plic0 59>,
<0x0 0x0 0x0 0x4 &plic0 60>;
clock-names = "pcie_aux";
- clocks = <&prci PRCI_CLK_PCIE_AUX>;
+ clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
pwren-gpios = <&gpio 5 0>;
reset-gpios = <&gpio 8 0>;
resets = <&prci 4>;
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Zong Li <zong.li@sifive.com>
To: mturquette@baylibre.com, sboyd@kernel.org, palmer@dabbelt.com,
paul.walmsley@sifive.com, lee.jones@linaro.org,
robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Zong Li <zong.li@sifive.com>, Palmer Dabbelt <palmer@rivosinc.com>
Subject: [PATCH v2 3/5] riscv: dts: Change the macro name of prci in each device node
Date: Fri, 4 Mar 2022 18:03:19 +0800 [thread overview]
Message-ID: <db92d209fa700f7da8bc8028083476fcc138d80e.1646388139.git.zong.li@sifive.com> (raw)
In-Reply-To: <cover.1646388139.git.zong.li@sifive.com>
We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 22 +++++++++---------
arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 26 +++++++++++-----------
2 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 3eef52b1a59b..aad45d7f498f 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -164,7 +164,7 @@ uart0: serial@10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <4>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
dma: dma@3000000 {
@@ -180,7 +180,7 @@ uart1: serial@10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <5>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
i2c0: i2c@10030000 {
@@ -188,7 +188,7 @@ i2c0: i2c@10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <50>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -201,7 +201,7 @@ qspi0: spi@10040000 {
<0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <51>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -212,7 +212,7 @@ qspi1: spi@10041000 {
<0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -222,7 +222,7 @@ qspi2: spi@10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <6>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -235,8 +235,8 @@ eth0: ethernet@10090000 {
<0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU540_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -246,7 +246,7 @@ pwm0: pwm@10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <42>, <43>, <44>, <45>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -255,7 +255,7 @@ pwm1: pwm@10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <46>, <47>, <48>, <49>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -281,7 +281,7 @@ gpio: gpio@10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index 8464b0e3c887..7b77c13496d8 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -166,7 +166,7 @@ uart0: serial@10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <39>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
uart1: serial@10011000 {
@@ -174,7 +174,7 @@ uart1: serial@10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <40>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
i2c0: i2c@10030000 {
@@ -182,7 +182,7 @@ i2c0: i2c@10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -194,7 +194,7 @@ i2c1: i2c@10031000 {
reg = <0x0 0x10031000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <53>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -207,7 +207,7 @@ qspi0: spi@10040000 {
<0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <41>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -218,7 +218,7 @@ qspi1: spi@10041000 {
<0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <42>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -228,7 +228,7 @@ spi0: spi@10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <43>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -241,8 +241,8 @@ eth0: ethernet@10090000 {
<0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU740_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -252,7 +252,7 @@ pwm0: pwm@10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <44>, <45>, <46>, <47>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -261,7 +261,7 @@ pwm1: pwm@10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <48>, <49>, <50>, <51>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -287,7 +287,7 @@ gpio: gpio@10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
pcie@e00000000 {
@@ -316,7 +316,7 @@ pcie@e00000000 {
<0x0 0x0 0x0 0x3 &plic0 59>,
<0x0 0x0 0x0 0x4 &plic0 60>;
clock-names = "pcie_aux";
- clocks = <&prci PRCI_CLK_PCIE_AUX>;
+ clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
pwren-gpios = <&gpio 5 0>;
reset-gpios = <&gpio 8 0>;
resets = <&prci 4>;
--
2.31.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-03-04 10:03 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 10:03 [PATCH v2 0/5] Refactor the PRCI driver to reduce the complexity Zong Li
2022-03-04 10:03 ` Zong Li
2022-03-04 10:03 ` [PATCH v2 1/5] clk: sifive: duplicate the macro definitions for the time being Zong Li
2022-03-04 10:03 ` Zong Li
2022-03-15 23:59 ` Stephen Boyd
2022-03-15 23:59 ` Stephen Boyd
2022-03-04 10:03 ` [PATCH v2 2/5] dt-bindings: change the macro name of prci in header files and example Zong Li
2022-03-04 10:03 ` Zong Li
2022-03-15 23:59 ` Stephen Boyd
2022-03-15 23:59 ` Stephen Boyd
2022-03-04 10:03 ` Zong Li [this message]
2022-03-04 10:03 ` [PATCH v2 3/5] riscv: dts: Change the macro name of prci in each device node Zong Li
2022-03-15 22:54 ` Stephen Boyd
2022-03-15 22:54 ` Stephen Boyd
2022-03-15 22:56 ` Stephen Boyd
2022-03-15 22:56 ` Stephen Boyd
2022-03-16 1:53 ` Zong Li
2022-03-16 1:53 ` Zong Li
2022-03-16 0:02 ` Stephen Boyd
2022-03-16 0:02 ` Stephen Boyd
2022-03-04 10:03 ` [PATCH v2 4/5] clk: sifive: Add SoCs prefix in each SoCs-dependent data Zong Li
2022-03-04 10:03 ` Zong Li
2022-03-16 0:02 ` Stephen Boyd
2022-03-16 0:02 ` Stephen Boyd
2022-03-04 10:03 ` [PATCH v2 5/5] clk: sifive: Move all stuff into SoCs header files from C files Zong Li
2022-03-04 10:03 ` Zong Li
2022-03-16 0:02 ` Stephen Boyd
2022-03-16 0:02 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=db92d209fa700f7da8bc8028083476fcc138d80e.1646388139.git.zong.li@sifive.com \
--to=zong.li@sifive.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=palmer@dabbelt.com \
--cc=palmer@rivosinc.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.