* [ALSA - driver 0000311]: error messages: boot process, application start
@ 2006-07-14 19:00 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2006-07-14 19:00 UTC (permalink / raw)
To: alsa-devel
The following issue has been RESOLVED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=311>
======================================================================
Reported By: phil
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 311
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: resolved
Distribution: Debian sid
Kernel Version: vanilla 2.6.5
Resolution: fixed
Fixed in Version:
======================================================================
Date Submitted: 05-27-2004 15:00 CEST
Last Modified: 07-14-2006 21:00 CEST
======================================================================
Summary: error messages: boot process, application start
Description:
Everytime I boot my machine I get the following error code:
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/ac97/ac97_codec.c:1868: MC'97 1 converters and GPIO not
ready (0xff00)
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
intel8x0_measure_ac97_clock: measured 49475 usecs
intel8x0: clocking to 48000
And the following one after starting frozen-bubble:
ALSA sound/core/seq/oss/seq_oss_init.c:213: no device found
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/intel8x0.c:611: codec_write 0: semaphore is not ready for
register 0x2c
That's the only thing. Sound works fine - it's only the message I'm
concernd about...
======================================================================
----------------------------------------------------------------------
nshmyrev - 01-13-05 23:35
----------------------------------------------------------------------
Still have the same problems with kernel 2.6.10 when I load snd_intel8x0
and snd_intel8x0m. For me that message doesn't brake anything, but it's
still not so pleasure to see warnings in syslog.
codec_semaphore: semaphore is not ready [0x1][0x701300]
codec_write 1: semaphore is not ready for register 0x54
Moreower, David Gómez <dabisu@gmail.com> reported that such messages
brakes sound working:
It's broken, at least in 2.6.10. In my case, if i loaded the modem
driver, the sound one stopped working (with a lot of semaphore
errors...) My solution is not using the modem driver by now :(. I
think that Takashi said that there was a problem in common
initialization in both drivers, so i hope it gets fixed soon ;)
So, hope this problem will be fixed somehow ;)
----------------------------------------------------------------------
phil - 11-24-05 10:06
----------------------------------------------------------------------
At the moment I'm using a Debian 2.6.14 kernel and Alsa 1.0.9b - and the
messages are gone.
Issue History
Date Modified Username Field Change
======================================================================
05-27-04 15:00 phil New Issue
05-27-04 15:00 phil Distribution => Debian sid
05-27-04 15:00 phil Kernel Version => vanilla 2.6.5
05-28-04 17:03 tiwai Note Added: 0001266
06-21-04 10:15 phil Note Added: 0001326
06-30-04 16:35 tiwai Note Added: 0001357
01-13-05 23:35 nshmyrev Note Added: 0003205
01-13-05 23:39 nshmyrev Issue Monitored: nshmyrev
11-24-05 10:06 phil Note Added: 0006839
07-14-06 21:00 Adrian Bunk Status new => resolved
07-14-06 21:00 Adrian Bunk Resolution open => fixed
======================================================================
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000311]: error messages: boot process, application start
@ 2005-11-24 9:06 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2005-11-24 9:06 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=311>
======================================================================
Reported By: phil
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 311
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Debian sid
Kernel Version: vanilla 2.6.5
======================================================================
Date Submitted: 05-27-2004 15:00 CEST
Last Modified: 11-24-2005 10:06 CET
======================================================================
Summary: error messages: boot process, application start
Description:
Everytime I boot my machine I get the following error code:
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/ac97/ac97_codec.c:1868: MC'97 1 converters and GPIO not
ready (0xff00)
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
intel8x0_measure_ac97_clock: measured 49475 usecs
intel8x0: clocking to 48000
And the following one after starting frozen-bubble:
ALSA sound/core/seq/oss/seq_oss_init.c:213: no device found
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/intel8x0.c:611: codec_write 0: semaphore is not ready for
register 0x2c
That's the only thing. Sound works fine - it's only the message I'm
concernd about...
======================================================================
----------------------------------------------------------------------
nshmyrev - 01-13-05 23:35
----------------------------------------------------------------------
Still have the same problems with kernel 2.6.10 when I load snd_intel8x0
and snd_intel8x0m. For me that message doesn't brake anything, but it's
still not so pleasure to see warnings in syslog.
codec_semaphore: semaphore is not ready [0x1][0x701300]
codec_write 1: semaphore is not ready for register 0x54
Moreower, David Gómez <dabisu@gmail.com> reported that such messages
brakes sound working:
It's broken, at least in 2.6.10. In my case, if i loaded the modem
driver, the sound one stopped working (with a lot of semaphore
errors...) My solution is not using the modem driver by now :(. I
think that Takashi said that there was a problem in common
initialization in both drivers, so i hope it gets fixed soon ;)
So, hope this problem will be fixed somehow ;)
----------------------------------------------------------------------
phil - 11-24-05 10:06
----------------------------------------------------------------------
At the moment I'm using a Debian 2.6.14 kernel and Alsa 1.0.9b - and the
messages are gone.
Issue History
Date Modified Username Field Change
======================================================================
05-27-04 15:00 phil New Issue
05-27-04 15:00 phil Distribution => Debian sid
05-27-04 15:00 phil Kernel Version => vanilla 2.6.5
05-28-04 17:03 tiwai Note Added: 0001266
06-21-04 10:15 phil Note Added: 0001326
06-30-04 16:35 tiwai Note Added: 0001357
01-13-05 23:35 nshmyrev Note Added: 0003205
01-13-05 23:39 nshmyrev Issue Monitored: nshmyrev
11-24-05 10:06 phil Note Added: 0006839
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000311]: error messages: boot process, application start
@ 2005-01-13 22:35 bugtrack
0 siblings, 0 replies; 5+ messages in thread
From: bugtrack @ 2005-01-13 22:35 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=311>
======================================================================
Reported By: phil
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 311
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Debian sid
Kernel Version: vanilla 2.6.5
======================================================================
Date Submitted: 05-27-2004 15:00 CEST
Last Modified: 01-13-2005 23:35 CET
======================================================================
Summary: error messages: boot process, application start
Description:
Everytime I boot my machine I get the following error code:
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/ac97/ac97_codec.c:1868: MC'97 1 converters and GPIO not
ready (0xff00)
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
intel8x0_measure_ac97_clock: measured 49475 usecs
intel8x0: clocking to 48000
And the following one after starting frozen-bubble:
ALSA sound/core/seq/oss/seq_oss_init.c:213: no device found
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/intel8x0.c:611: codec_write 0: semaphore is not ready for
register 0x2c
That's the only thing. Sound works fine - it's only the message I'm
concernd about...
======================================================================
----------------------------------------------------------------------
tiwai - 06-30-04 16:35
----------------------------------------------------------------------
Well, these messages are harmless, so you can ignore safely.
I'll disable the first message ("no device found" from seq_oss_init.c).
The messages about codec appear when the driver probes the secondary
codec, which is likely a modem codec.
----------------------------------------------------------------------
nshmyrev - 01-13-05 23:35
----------------------------------------------------------------------
Still have the same problems with kernel 2.6.10 when I load snd_intel8x0
and snd_intel8x0m. For me that message doesn't brake anything, but it's
still not so pleasure to see warnings in syslog.
codec_semaphore: semaphore is not ready [0x1][0x701300]
codec_write 1: semaphore is not ready for register 0x54
Moreower, David Gómez <dabisu@gmail.com> reported that such messages
brakes sound working:
It's broken, at least in 2.6.10. In my case, if i loaded the modem
driver, the sound one stopped working (with a lot of semaphore
errors...) My solution is not using the modem driver by now :(. I
think that Takashi said that there was a problem in common
initialization in both drivers, so i hope it gets fixed soon ;)
So, hope this problem will be fixed somehow ;)
Issue History
Date Modified Username Field Change
======================================================================
05-27-04 15:00 phil New Issue
05-27-04 15:00 phil Distribution => Debian sid
05-27-04 15:00 phil Kernel Version => vanilla 2.6.5
05-28-04 17:03 tiwai Note Added: 0001266
06-21-04 10:15 phil Note Added: 0001326
06-30-04 16:35 tiwai Note Added: 0001357
01-13-05 23:35 nshmyrev Note Added: 0003205
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000311]: error messages: boot process, application start
@ 2004-06-30 14:35 noreply
0 siblings, 0 replies; 5+ messages in thread
From: noreply @ 2004-06-30 14:35 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000311
======================================================================
Reported By: phil
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 311
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Debian sid
Kernel Version: vanilla 2.6.5
======================================================================
Date Submitted: 05-27-2004 15:00 CEST
Last Modified: 06-30-2004 16:35 CEST
======================================================================
Summary: error messages: boot process, application start
Description:
Everytime I boot my machine I get the following error code:
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/ac97/ac97_codec.c:1868: MC'97 1 converters and GPIO not
ready (0xff00)
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
intel8x0_measure_ac97_clock: measured 49475 usecs
intel8x0: clocking to 48000
And the following one after starting frozen-bubble:
ALSA sound/core/seq/oss/seq_oss_init.c:213: no device found
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/intel8x0.c:611: codec_write 0: semaphore is not ready for
register 0x2c
That's the only thing. Sound works fine - it's only the message I'm
concernd about...
======================================================================
----------------------------------------------------------------------
tiwai - 05-28-2004 17:03 CEST
----------------------------------------------------------------------
could you try 1.0.5? at least this kind of messages should appear
only once in this version.
----------------------------------------------------------------------
phil - 06-21-2004 10:15 CEST
----------------------------------------------------------------------
I tried 1.0.5a-1 (debian package) and got still the same message with the
same quantity.
----------------------------------------------------------------------
tiwai - 06-30-2004 16:35 CEST
----------------------------------------------------------------------
Well, these messages are harmless, so you can ignore safely.
I'll disable the first message ("no device found" from seq_oss_init.c).
The messages about codec appear when the driver probes the secondary
codec, which is likely a modem codec.
Bug History
Date Modified Username Field Change
======================================================================
05-27-04 15:00 phil New Bug
05-27-04 15:00 phil Distribution => Debian sid
05-27-04 15:00 phil Kernel Version => vanilla 2.6.5
05-28-04 17:03 tiwai Bugnote Added: 0001266
06-21-04 10:15 phil Bugnote Added: 0001326
06-30-04 16:35 tiwai Bugnote Added: 0001357
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ALSA - driver 0000311]: error messages: boot process, application start
@ 2004-06-21 8:15 noreply
0 siblings, 0 replies; 5+ messages in thread
From: noreply @ 2004-06-21 8:15 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000311
======================================================================
Reported By: phil
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 311
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Debian sid
Kernel Version: vanilla 2.6.5
======================================================================
Date Submitted: 05-27-2004 15:00 CEST
Last Modified: 06-21-2004 10:15 CEST
======================================================================
Summary: error messages: boot process, application start
Description:
Everytime I boot my machine I get the following error code:
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/ac97/ac97_codec.c:1868: MC'97 1 converters and GPIO not
ready (0xff00)
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
intel8x0_measure_ac97_clock: measured 49475 usecs
intel8x0: clocking to 48000
And the following one after starting frozen-bubble:
ALSA sound/core/seq/oss/seq_oss_init.c:213: no device found
ALSA sound/pci/intel8x0.c:596: codec_semaphore: semaphore is not ready
[0x1][0x700300]
ALSA sound/pci/intel8x0.c:611: codec_write 0: semaphore is not ready for
register 0x2c
That's the only thing. Sound works fine - it's only the message I'm
concernd about...
======================================================================
----------------------------------------------------------------------
tiwai - 05-28-2004 17:03 CEST
----------------------------------------------------------------------
could you try 1.0.5? at least this kind of messages should appear
only once in this version.
----------------------------------------------------------------------
phil - 06-21-2004 10:15 CEST
----------------------------------------------------------------------
I tried 1.0.5a-1 (debian package) and got still the same message with the
same quantity.
Bug History
Date Modified Username Field Change
======================================================================
05-27-04 15:00 phil New Bug
05-27-04 15:00 phil Distribution => Debian sid
05-27-04 15:00 phil Kernel Version => vanilla 2.6.5
05-28-04 17:03 tiwai Bugnote Added: 0001266
06-21-04 10:15 phil Bugnote Added: 0001326
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference
Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer
Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA
REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2006-07-14 19:00 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-07-14 19:00 [ALSA - driver 0000311]: error messages: boot process, application start bugtrack
-- strict thread matches above, loose matches on Subject: below --
2005-11-24 9:06 bugtrack
2005-01-13 22:35 bugtrack
2004-06-30 14:35 noreply
2004-06-21 8:15 noreply
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.