From: Stefan Wahren <stefan.wahren@i2se.com> To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, Eric Anholt <eric@anholt.net> Cc: devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, wahrenst@gmx.net Subject: Re: [PATCH] ARM: dts: bcm283x: Use firmware PM driver for V3D Date: Mon, 9 Mar 2020 16:41:07 +0100 [thread overview] Message-ID: <ddcb8fd5-9e35-454c-b38d-d36e7b41ef07@i2se.com> (raw) In-Reply-To: <01ceb60e-a791-b6ca-352e-ad2e79f264e3@i2se.com> Hi Nicolas, On 06.03.20 21:33, Stefan Wahren wrote: > Hi Nicolas, > > Am 05.03.20 um 11:44 schrieb Nicolas Saenz Julienne: >> Hi Stefan, >> >> On Tue, 2020-03-03 at 20:24 +0100, Stefan Wahren wrote: >>>>>> Note: I tested this on RPi3b, RPi3a+ and RPi2b. >>>>> as i already wrote this prevent X to start on current Raspbian on my >>>>> Raspberry Pi 3A+ (multi_v7_defconfig, no u-boot). We must be careful here. >>>>> >>>>> I will take a look at the debug UART. Maybe there are more helpful >>>>> information. >>>> It seems we're seeing different things, I tested this on raspbian >>>> (multi_v7_defconfig) and on arm64. I'll try again from scratch tomorrow. >>> My modifications to the Raspbian image (from 13.2.2020) are little: >>> >>> - specify devicetree to config.txt >>> - change console to ttyS1 and remove "silent" in cmdline.txt >>> - rename all original kernel7*.img >>> - copy dtb and kernel7.img to boot partition >>> - copy kernel modules to root partition >> Would you mind retesting with the latest linux-next? I validated an image based >> on 5.6.0-rc4-next-20200305-00001-g285a7a64cd56 and a fresh raspbian download on >> RPi3a+ without X issues. > i retested with todays linux-next and the issue persists on my RPi 3A+ / > HP ZR2440w with this patch applied. I tested my display with a RPI 3B, 3B+ and a Zero W. All of them had the same issue. Btw i used this display the last years for testing the Raspberry Pi. After that i connected the RPI 3B to my TV screen and it works with the patch applied. > > I will try more hardware combinations tomorrow to see, this issue is > more board or display related. > > Best regards > Stefan > >
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <stefan.wahren@i2se.com> To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, Eric Anholt <eric@anholt.net> Cc: devicetree@vger.kernel.org, wahrenst@gmx.net, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH] ARM: dts: bcm283x: Use firmware PM driver for V3D Date: Mon, 9 Mar 2020 16:41:07 +0100 [thread overview] Message-ID: <ddcb8fd5-9e35-454c-b38d-d36e7b41ef07@i2se.com> (raw) In-Reply-To: <01ceb60e-a791-b6ca-352e-ad2e79f264e3@i2se.com> Hi Nicolas, On 06.03.20 21:33, Stefan Wahren wrote: > Hi Nicolas, > > Am 05.03.20 um 11:44 schrieb Nicolas Saenz Julienne: >> Hi Stefan, >> >> On Tue, 2020-03-03 at 20:24 +0100, Stefan Wahren wrote: >>>>>> Note: I tested this on RPi3b, RPi3a+ and RPi2b. >>>>> as i already wrote this prevent X to start on current Raspbian on my >>>>> Raspberry Pi 3A+ (multi_v7_defconfig, no u-boot). We must be careful here. >>>>> >>>>> I will take a look at the debug UART. Maybe there are more helpful >>>>> information. >>>> It seems we're seeing different things, I tested this on raspbian >>>> (multi_v7_defconfig) and on arm64. I'll try again from scratch tomorrow. >>> My modifications to the Raspbian image (from 13.2.2020) are little: >>> >>> - specify devicetree to config.txt >>> - change console to ttyS1 and remove "silent" in cmdline.txt >>> - rename all original kernel7*.img >>> - copy dtb and kernel7.img to boot partition >>> - copy kernel modules to root partition >> Would you mind retesting with the latest linux-next? I validated an image based >> on 5.6.0-rc4-next-20200305-00001-g285a7a64cd56 and a fresh raspbian download on >> RPi3a+ without X issues. > i retested with todays linux-next and the issue persists on my RPi 3A+ / > HP ZR2440w with this patch applied. I tested my display with a RPI 3B, 3B+ and a Zero W. All of them had the same issue. Btw i used this display the last years for testing the Raspberry Pi. After that i connected the RPI 3B to my TV screen and it works with the patch applied. > > I will try more hardware combinations tomorrow to see, this issue is > more board or display related. > > Best regards > Stefan > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-09 15:41 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-03 17:32 [PATCH] ARM: dts: bcm283x: Use firmware PM driver for V3D Nicolas Saenz Julienne 2020-03-03 17:32 ` Nicolas Saenz Julienne 2020-03-03 18:17 ` Stefan Wahren 2020-03-03 18:17 ` Stefan Wahren 2020-03-03 18:37 ` Nicolas Saenz Julienne 2020-03-03 18:37 ` Nicolas Saenz Julienne 2020-03-03 19:24 ` Stefan Wahren 2020-03-03 19:24 ` Stefan Wahren 2020-03-05 10:44 ` Nicolas Saenz Julienne 2020-03-05 10:44 ` Nicolas Saenz Julienne 2020-03-06 20:33 ` Stefan Wahren 2020-03-06 20:33 ` Stefan Wahren 2020-03-09 15:41 ` Stefan Wahren [this message] 2020-03-09 15:41 ` Stefan Wahren 2020-03-09 19:22 ` Nicolas Saenz Julienne 2020-03-09 19:22 ` Nicolas Saenz Julienne 2020-03-13 13:59 ` Stefan Wahren 2020-03-13 13:59 ` Stefan Wahren 2020-03-15 19:16 ` Stefan Wahren 2020-03-16 12:40 ` Nicolas Saenz Julienne 2020-03-16 13:57 ` Dave Stevenson 2020-03-20 14:43 ` Nicolas Saenz Julienne 2020-03-23 14:56 ` Maxime Ripard 2020-03-23 15:55 ` Dave Stevenson 2020-03-23 18:48 ` Stefan Wahren 2020-03-23 19:10 ` Dave Stevenson 2020-03-26 12:24 ` Nicolas Saenz Julienne 2020-03-26 12:24 ` Nicolas Saenz Julienne 2020-03-26 17:24 ` Stefan Wahren 2020-03-26 17:24 ` Stefan Wahren 2020-03-27 0:35 ` Florian Fainelli 2020-03-27 0:35 ` Florian Fainelli 2020-03-27 10:41 ` Nicolas Saenz Julienne 2020-03-27 10:41 ` Nicolas Saenz Julienne 2020-03-27 11:24 ` Stefan Wahren 2020-03-27 11:24 ` Stefan Wahren 2020-03-27 12:58 ` Nicolas Saenz Julienne 2020-03-27 12:58 ` Nicolas Saenz Julienne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=ddcb8fd5-9e35-454c-b38d-d36e7b41ef07@i2se.com \ --to=stefan.wahren@i2se.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=eric@anholt.net \ --cc=f.fainelli@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=nsaenzjulienne@suse.de \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ --cc=wahrenst@gmx.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.