Re: [PATCH v2 0/2] Add definition for GPIO direction

["Vaittinen, Matti" <Matti.Vaittinen@fi.rohmeurope.com>]

On Wed, 2019-11-06 at 13:08 +0100, Sebastian Reichel wrote:
> Hi,
> 
> On Wed, Nov 06, 2019 at 10:51:06AM +0200, Matti Vaittinen wrote:
> > The patch series adds definitions for GPIO line directions.
> > 
> > For occasional GPIO contributor like me it is always a pain to
> > remember
> > whether 1 or 0 was used for GPIO direction INPUT/OUTPUT.
> 
> Maybe also update the GPIO drivers in pinctrl?
> 
> $ git grep -l gpio_get_direction drivers/pinctrl
> drivers/pinctrl/bcm/pinctrl-bcm2835.c
> drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
> drivers/pinctrl/intel/pinctrl-baytrail.c
> drivers/pinctrl/intel/pinctrl-cherryview.c
> drivers/pinctrl/intel/pinctrl-intel.c
> drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> drivers/pinctrl/mediatek/pinctrl-paris.c
> drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
> drivers/pinctrl/pinctrl-amd.c
> drivers/pinctrl/pinctrl-at91.c
> drivers/pinctrl/pinctrl-axp209.c
> drivers/pinctrl/pinctrl-ingenic.c
> drivers/pinctrl/pinctrl-ocelot.c
> drivers/pinctrl/pinctrl-oxnas.c
> drivers/pinctrl/pinctrl-pic32.c
> drivers/pinctrl/pinctrl-pistachio.c
> drivers/pinctrl/pinctrl-rk805.c
> drivers/pinctrl/pinctrl-rockchip.c
> drivers/pinctrl/pinctrl-rza1.c
> drivers/pinctrl/pinctrl-st.c
> drivers/pinctrl/pinctrl-stmfx.c
> drivers/pinctrl/pinctrl-sx150x.c
> drivers/pinctrl/qcom/pinctrl-msm.c
> drivers/pinctrl/stm32/pinctrl-stm32.c
> drivers/pinctrl/vt8500/pinctrl-wmt.c

Ouch. I didn't check from pinctrl but I see those should be converted
as well. I'm a bit short on time right now so if anyone else is
interested I won't mind :)

Luckily the value for IN and OUT is not changed - only the defines were
added - so all of the drivers do not need to be done at once. If no one
else will take the pinctrl part then I can probably do pinctrl patches
for v5.6 cycle.

Br,
	Matti Vaittinen