[PATCH 0/6] Add basic support for Loongson-2K1000

[PATCH 0/6] Add basic support for Loongson-2K1000

[Qing Zhang]

These patches support single-core DTS boot to the serial port login
interface, which can be operated using conventional commands.

I have successfully tested it on the Loongson 2K1000 machine.
pmon: http://cgit.loongnix.org/cgit/pmon-loongson3/

Qing Zhang (6):
  MIPS: Loongson64: DeviceTree for 2K1000
  MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI.
  MIPS: Loongson64: Add support for the 2K1000 to get cpu_clock_freq
  MIPS: Loongson64: Add 2K1000 early_printk_port
  irqchip/loongson-liointc: irqchip add 2.0 version.
  MIPS: Loongson64: Add a Loongson-2k default config file

 arch/mips/boot/dts/loongson/Makefile          |   1 +
 .../boot/dts/loongson/loongson64-2k1000.dtsi  | 243 ++++++++++++
 .../dts/loongson/loongson64_2core_2k1000.dts  |  10 +
 arch/mips/configs/loongson2k_defconfig        | 353 ++++++++++++++++++
 .../include/asm/mach-loongson64/boot_param.h  |   6 +
 .../asm/mach-loongson64/builtin_dtbs.h        |   1 +
 .../include/asm/mach-loongson64/loongson.h    |   3 +-
 arch/mips/loongson64/env.c                    |  13 +-
 arch/mips/loongson64/init.c                   |  21 +-
 arch/mips/loongson64/time.c                   |  14 +
 drivers/irqchip/irq-loongson-liointc.c        |  55 ++-
 11 files changed, 706 insertions(+), 14 deletions(-)
 create mode 100644 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
 create mode 100644 arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts
 create mode 100644 arch/mips/configs/loongson2k_defconfig

-- 
2.20.1

[PATCH 1/6] MIPS: Loongson64: DeviceTree for 2K1000

[Qing Zhang]

Add DeviceTree files for Loongson 2K1000 processor,currently only
supports single-core boot.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
---
 arch/mips/boot/dts/loongson/Makefile          |   1 +
 .../boot/dts/loongson/loongson64-2k1000.dtsi  | 243 ++++++++++++++++++
 .../dts/loongson/loongson64_2core_2k1000.dts  |  10 +
 .../asm/mach-loongson64/builtin_dtbs.h        |   1 +
 4 files changed, 255 insertions(+)
 create mode 100644 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
 create mode 100644 arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts

diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index 8fd0efb37423..72267bfda9b4 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -1,4 +1,5 @@
 # SPDX_License_Identifier: GPL_2.0
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64_2core_2k1000.dtb
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_ls7a.dtb
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_rs780e.dtb
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_8core_rs780e.dtb
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
new file mode 100644
index 000000000000..fd0e99bfe57b
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-3.0
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "loongson,loongson2k1000";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "loongson,gs264";
+			reg = <0x0>;
+			#clock-cells = <1>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	memory {
+		compatible = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0x00200000 0x00000000 0x0ee00000>, /* 238 MB at 2 MB */
+			<0x00000000 0x20000000 0x00000000 0x1f000000>, /* 496 MB at 512 MB */
+			<0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */
+	};
+
+	cpu_clk: cpu_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <800000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	package0: bus@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* ioports */
+			0 0x40000000 0 0x40000000 0 0x40000000
+			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
+
+		liointc0: interrupt-controller@1fe11400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0 0x1fe11400 0 0x40>,
+				<0 0x1fe11040 0 0x8>,
+				<0 0x1fe11140 0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						<0x00000000>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe11440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0 0x1fe11440 0 0x40>,
+				<0 0x1fe11048 0 0x8>,
+				<0 0x1fe11148 0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+			interrupt-names = "int1";
+
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						<0xffffffff>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+		};
+
+		uart0: serial@1fe00000 {
+			compatible = "ns16550a";
+			reg = <0 0x1fe00000 0 0x8>;
+			clock-frequency = <125000000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			no-loopback-test;
+		};
+
+		pci@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <2>;
+
+			reg = <0 0x1a000000 0 0x02000000>,
+				<0xfe 0x00000000 0 0x20000000>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x18000000  0x0 0x00010000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000  0x0 0x40000000>;
+
+			ehci@4,1 {
+				compatible = "pci0014,7a14.0",
+						   "pci0014,7a14",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+				reg = <0x2100 0x0 0x0 0x0 0x0>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+			};
+
+			ehci@4,2 {
+				compatible = "pci0014,7a24.0",
+						   "pci0014,7a24",
+						   "pciclass0c0310",
+						   "pciclass0c03";
+
+				reg = <0x2200 0x0 0x0 0x0 0x0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+			};
+
+			sata@8,0 {
+				compatible = "pci0014,7a08.0",
+						   "pci0014,7a08",
+						   "pciclass010601",
+						   "pciclass0106";
+
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc0>;
+			};
+
+			pci_bridge@9,0 {
+				compatible = "pci0014,7a19.0",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#interrupt-cells = <1>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+				external-facing;
+			};
+
+			pci_bridge@a,0 {
+				compatible = "pci0014,7a19.0",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#interrupt-cells = <1>;
+				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+				external-facing;
+			};
+
+			pci_bridge@b,0 {
+				compatible = "pci0014,7a19.0",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#interrupt-cells = <1>;
+				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+				external-facing;
+			};
+
+			pci_bridge@c,0 {
+				compatible = "pci0014,7a19.0",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#interrupt-cells = <1>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+				external-facing;
+			};
+
+			pci_bridge@d,0 {
+				compatible = "pci0014,7a19.0",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#interrupt-cells = <1>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+				external-facing;
+			};
+
+			pci_bridge@e,0 {
+				compatible = "pci0014,7a19.0",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&liointc1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+				external-facing;
+			};
+
+		};
+	};
+};
+
diff --git a/arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts b/arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts
new file mode 100644
index 000000000000..e31d2ee65cd5
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64-2k1000.dtsi"
+
+/ {
+	compatible = "loongson,loongson64-2core-2k1000";
+};
+
diff --git a/arch/mips/include/asm/mach-loongson64/builtin_dtbs.h b/arch/mips/include/asm/mach-loongson64/builtin_dtbs.h
index 839410cda621..8be710557bdb 100644
--- a/arch/mips/include/asm/mach-loongson64/builtin_dtbs.h
+++ b/arch/mips/include/asm/mach-loongson64/builtin_dtbs.h
@@ -8,6 +8,7 @@
 #ifndef __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
 #define __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
 
+extern u32 __dtb_loongson64_2core_2k1000_begin[];
 extern u32 __dtb_loongson64c_4core_ls7a_begin[];
 extern u32 __dtb_loongson64c_4core_rs780e_begin[];
 extern u32 __dtb_loongson64c_8core_rs780e_begin[];
-- 
2.20.1

[PATCH 2/6] MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI.

[Qing Zhang]

Add DTB boot support, only support LS2K1000 processor for now,
determine whether to use the built-in DTB or the DTB from the
firmware by checking the range of CKSEG0 and XKPHYS.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
---
 .../include/asm/mach-loongson64/boot_param.h     |  6 ++++++
 arch/mips/include/asm/mach-loongson64/loongson.h |  3 ++-
 arch/mips/loongson64/env.c                       | 13 ++++++++++++-
 arch/mips/loongson64/init.c                      | 16 ++++++++++++++--
 4 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index 4592841b6b0c..53c29a305ff0 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -198,7 +198,13 @@ enum loongson_bridge_type {
 	VIRTUAL = 3
 };
 
+enum loongson_fw_interface {
+	LOONGSON_LEFI = 0,
+	LOONGSON_DTB = 1,
+};
+
 struct loongson_system_configuration {
+	enum loongson_fw_interface fw_interface;
 	u32 nr_cpus;
 	u32 nr_nodes;
 	int cores_per_node;
diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index ac1c20e172a2..3f885fa26ba6 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -23,7 +23,8 @@ extern u32 memsize, highmemsize;
 extern const struct plat_smp_ops loongson3_smp_ops;
 
 /* loongson-specific command line, env and memory initialization */
-extern void __init prom_init_env(void);
+extern void __init prom_dtb_init_env(void);
+extern void __init prom_lefi_init_env(void);
 extern void __init szmem(unsigned int node);
 extern void *loongson_fdt_blob;
 
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 51a5d050a94c..e7d3a06175e3 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -43,7 +43,18 @@ const char *get_system_type(void)
 	return "Generic Loongson64 System";
 }
 
-void __init prom_init_env(void)
+
+void __init prom_dtb_init_env(void)
+{
+	if ((fw_arg2 < CKSEG0 || fw_arg2 > CKSEG1)
+		&& (fw_arg2 < XKPHYS || fw_arg2 > XKSEG))
+
+		loongson_fdt_blob = __dtb_loongson64_2core_2k1000_begin;
+	else
+		loongson_fdt_blob = (void *)fw_arg2;
+}
+
+void __init prom_lefi_init_env(void)
 {
 	struct boot_params *boot_p;
 	struct loongson_params *loongson_p;
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index cfa788bca871..8bef1ebab72d 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -52,6 +52,10 @@ void __init szmem(unsigned int node)
 	static unsigned long num_physpages;
 	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
 
+	/* Otherwise come from DTB */
+	if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
+		return;
+
 	/* Parse memory information and activate */
 	for (i = 0; i < loongson_memmap->nr_map; i++) {
 		node_id = loongson_memmap->map[i].node_id;
@@ -94,12 +98,20 @@ static void __init prom_init_memory(void)
 void __init prom_init(void)
 {
 	fw_init_cmdline();
-	prom_init_env();
+
+	if (fw_arg2 == 0 || (be32_to_cpup((__be32 *)fw_arg2) == OF_DT_HEADER)) {
+		loongson_sysconf.fw_interface = LOONGSON_DTB;
+		prom_dtb_init_env();
+	} else {
+		loongson_sysconf.fw_interface = LOONGSON_LEFI;
+		prom_lefi_init_env();
+	}
 
 	/* init base address of io space */
 	set_io_port_base(PCI_IOBASE);
 
-	loongson_sysconf.early_config();
+	if (loongson_sysconf.early_config)
+		loongson_sysconf.early_config();
 
 #ifdef CONFIG_NUMA
 	prom_init_numa_memory();
-- 
2.20.1

[PATCH 3/6] MIPS: Loongson64: Add support for the 2K1000 to get cpu_clock_freq

[Qing Zhang]

Get the fixed-clock from the CPU0 node of the device tree.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
---
 arch/mips/loongson64/time.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/mips/loongson64/time.c b/arch/mips/loongson64/time.c
index 91e842b58365..45698b18f4ae 100644
--- a/arch/mips/loongson64/time.c
+++ b/arch/mips/loongson64/time.c
@@ -11,9 +11,23 @@
 #include <asm/hpet.h>
 
 #include <loongson.h>
+#include <linux/clk.h>
+#include <linux/of_clk.h>
 
 void __init plat_time_init(void)
 {
+	struct clk *clk = NULL;
+	struct device_node *np;
+
+	of_clk_init(NULL);
+
+	np = of_get_cpu_node(0, NULL);
+	clk = of_clk_get(np, 0);
+	if (clk) {
+		cpu_clock_freq = clk_get_rate(clk);
+		clk_put(clk);
+	}
+
 	/* setup mips r4k timer */
 	mips_hpt_frequency = cpu_clock_freq / 2;
 
-- 
2.20.1

[PATCH 4/6] MIPS: Loongson64: Add 2K1000 early_printk_port

[Qing Zhang]

Distinguish between 3A series CPU and 2K1000 CPU UART0.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
---
 arch/mips/loongson64/init.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index 8bef1ebab72d..a8ad02d8d088 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -120,7 +120,10 @@ void __init prom_init(void)
 #endif
 
 	/* Hardcode to CPU UART 0 */
-	setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
+	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
+		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE), 0, 1024);
+	else
+		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
 
 	register_smp_ops(&loongson3_smp_ops);
 	board_nmi_handler_setup = mips_nmi_setup;
-- 
2.20.1

[PATCH 5/6] irqchip/loongson-liointc: irqchip add 2.0 version.

[Qing Zhang]

Add IO interrupt controller support for Loongson 2k1000, different
from the 3a series is that 2K1000 has 64 interrupt sources, 0-31
correspond to the device tree liointc0 device node, and the other
correspond to liointc1 node.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 55 +++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 9ed1bc473663..496e73bde597 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -20,6 +20,7 @@
 
 #define LIOINTC_CHIP_IRQ	32
 #define LIOINTC_NUM_PARENT 4
+#define LIOINTC_NUM_CORES	4
 
 #define LIOINTC_INTC_CHIP_START	0x20
 
@@ -42,6 +43,7 @@ struct liointc_handler_data {
 struct liointc_priv {
 	struct irq_chip_generic		*gc;
 	struct liointc_handler_data	handler[LIOINTC_NUM_PARENT];
+	void __iomem			*core_isr[LIOINTC_NUM_CORES];
 	u8				map_cache[LIOINTC_CHIP_IRQ];
 	bool				has_lpc_irq_errata;
 };
@@ -51,11 +53,12 @@ static void liointc_chained_handle_irq(struct irq_desc *desc)
 	struct liointc_handler_data *handler = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct irq_chip_generic *gc = handler->priv->gc;
+	int core = get_ebase_cpunum() % LIOINTC_NUM_CORES;
 	u32 pending;
 
 	chained_irq_enter(chip, desc);
 
-	pending = readl(gc->reg_base + LIOINTC_REG_INTC_STATUS);
+	pending = readl(handler->priv->core_isr[core]);
 
 	if (!pending) {
 		/* Always blame LPC IRQ if we have that bug */
@@ -141,6 +144,15 @@ static void liointc_resume(struct irq_chip_generic *gc)
 }
 
 static const char * const parent_names[] = {"int0", "int1", "int2", "int3"};
+static const char * const core_reg_names[] = {"isr0", "isr1", "isr2", "isr3"};
+
+static void __iomem *liointc_get_reg_byname(struct device_node *node,
+						const char *name)
+{
+	int index = of_property_match_string(node, "reg-names", name);
+
+	return of_iomap(node, index);
+}
 
 int __init liointc_of_init(struct device_node *node,
 				struct device_node *parent)
@@ -159,10 +171,28 @@ int __init liointc_of_init(struct device_node *node,
 	if (!priv)
 		return -ENOMEM;
 
-	base = of_iomap(node, 0);
-	if (!base) {
-		err = -ENODEV;
-		goto out_free_priv;
+	if (of_device_is_compatible(node, "loongson,liointc-2.0")) {
+		base = liointc_get_reg_byname(node, "main");
+		if (!base) {
+			err = -ENODEV;
+			goto out_free_priv;
+		}
+		for (i = 0; i < LIOINTC_NUM_CORES; i++) {
+			priv->core_isr[i] =
+				liointc_get_reg_byname(node, core_reg_names[i]);
+		}
+		if (!priv->core_isr[0]) {
+			err = -ENODEV;
+			goto out_iounmap_base;
+		}
+	} else {
+		base = of_iomap(node, 0);
+		if (!base) {
+			err = -ENODEV;
+			goto out_free_priv;
+		}
+		for (i = 0; i < LIOINTC_NUM_CORES; i++)
+			priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS;
 	}
 
 	for (i = 0; i < LIOINTC_NUM_PARENT; i++) {
@@ -172,7 +202,7 @@ int __init liointc_of_init(struct device_node *node,
 	}
 	if (!have_parent) {
 		err = -ENODEV;
-		goto out_iounmap;
+		goto out_iounmap_isr;
 	}
 
 	sz = of_property_read_variable_u32_array(node,
@@ -183,7 +213,7 @@ int __init liointc_of_init(struct device_node *node,
 	if (sz < 4) {
 		pr_err("loongson-liointc: No parent_int_map\n");
 		err = -ENODEV;
-		goto out_iounmap;
+		goto out_iounmap_isr;
 	}
 
 	for (i = 0; i < LIOINTC_NUM_PARENT; i++)
@@ -195,7 +225,7 @@ int __init liointc_of_init(struct device_node *node,
 	if (!domain) {
 		pr_err("loongson-liointc: cannot add IRQ domain\n");
 		err = -EINVAL;
-		goto out_iounmap;
+		goto out_iounmap_isr;
 	}
 
 	err = irq_alloc_domain_generic_chips(domain, 32, 1,
@@ -260,7 +290,13 @@ int __init liointc_of_init(struct device_node *node,
 
 out_free_domain:
 	irq_domain_remove(domain);
-out_iounmap:
+out_iounmap_isr:
+	for (i = 0; i < LIOINTC_NUM_CORES; i++) {
+		if (!priv->core_isr[i])
+			continue;
+		iounmap(priv->core_isr[i]);
+	}
+out_iounmap_base:
 	iounmap(base);
 out_free_priv:
 	kfree(priv);
@@ -270,3 +306,4 @@ int __init liointc_of_init(struct device_node *node,
 
 IRQCHIP_DECLARE(loongson_liointc_1_0, "loongson,liointc-1.0", liointc_of_init);
 IRQCHIP_DECLARE(loongson_liointc_1_0a, "loongson,liointc-1.0a", liointc_of_init);
+IRQCHIP_DECLARE(loongson_liointc_2_0, "loongson,liointc-2.0", liointc_of_init);
-- 
2.20.1

[PATCH 6/6] MIPS: Loongson64: Add a Loongson-2k default config file

[Qing Zhang]

Add default config for 2K1000.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
---
 arch/mips/configs/loongson2k_defconfig | 353 +++++++++++++++++++++++++
 1 file changed, 353 insertions(+)
 create mode 100644 arch/mips/configs/loongson2k_defconfig

diff --git a/arch/mips/configs/loongson2k_defconfig b/arch/mips/configs/loongson2k_defconfig
new file mode 100644
index 000000000000..e948ca487e2d
--- /dev/null
+++ b/arch/mips/configs/loongson2k_defconfig
@@ -0,0 +1,353 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_MACH_LOONGSON64=y
+# CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION is not set
+CONFIG_HZ_256=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MQ_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
+CONFIG_BINFMT_MISC=m
+CONFIG_KSM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_IP_VS=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP_SCTP=m
+CONFIG_L2TP=m
+CONFIG_BRIDGE=m
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=y
+CONFIG_PCIEASPM_PERFORMANCE=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_RAID_ATTRS=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=y
+CONFIG_MEGARAID_SAS=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_I825XX is not set
+CONFIG_E1000=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IXGB=y
+CONFIG_IXGBE=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETERION is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_NI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
+# CONFIG_NET_VENDOR_PENSANDO is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RDC is not set
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_R8169=y
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_TOSHIBA is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_ATH9K=m
+CONFIG_HOSTAP=m
+CONFIG_INPUT_LEDS=m
+CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=16
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=m
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PIIX4=y
+CONFIG_GPIO_LOONGSON=y
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_W83627HF=m
+# CONFIG_MEDIA_CEC_SUPPORT is not set
+CONFIG_MEDIA_SUPPORT=m
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_FB_RADEON=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=m
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=m
+# CONFIG_SND_ISA is not set
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_DMADEVICES=y
+# CONFIG_CPU_HWMON is not set
+CONFIG_PM_DEVFREQ=y
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_QUOTA=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_FAT_DEFAULT_IOCHARSET="gb2312"
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_PATH=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
-- 
2.20.1

Re: [PATCH 2/6] MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI.

[Thomas Bogendoerfer]

On Tue, Feb 09, 2021 at 05:32:20PM +0800, Qing Zhang wrote:
> Add DTB boot support, only support LS2K1000 processor for now,
> determine whether to use the built-in DTB or the DTB from the
> firmware by checking the range of CKSEG0 and XKPHYS.
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
> ---
>  .../include/asm/mach-loongson64/boot_param.h     |  6 ++++++
>  arch/mips/include/asm/mach-loongson64/loongson.h |  3 ++-
>  arch/mips/loongson64/env.c                       | 13 ++++++++++++-
>  arch/mips/loongson64/init.c                      | 16 ++++++++++++++--
>  4 files changed, 34 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
> index 4592841b6b0c..53c29a305ff0 100644
> --- a/arch/mips/include/asm/mach-loongson64/boot_param.h
> +++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
> @@ -198,7 +198,13 @@ enum loongson_bridge_type {
>  	VIRTUAL = 3
>  };
>  
> +enum loongson_fw_interface {
> +	LOONGSON_LEFI = 0,
> +	LOONGSON_DTB = 1,
> +};
> +
>  struct loongson_system_configuration {
> +	enum loongson_fw_interface fw_interface;

do you need this for future use ? Right now this information is only
needed in init.c and doesn't need to be exported...

> +	if (fw_arg2 == 0 || (be32_to_cpup((__be32 *)fw_arg2) == OF_DT_HEADER)) {

what about using fdt_magic(fw_arg2) == FDT_MAGIC ?

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

Re: [PATCH 5/6] irqchip/loongson-liointc: irqchip add 2.0 version.

[Jiaxun Yang]

On Tue, Feb 9, 2021, at 5:32 PM, Qing Zhang wrote:
> Add IO interrupt controller support for Loongson 2k1000, different
> from the 3a series is that 2K1000 has 64 interrupt sources, 0-31
> correspond to the device tree liointc0 device node, and the other
> correspond to liointc1 node.
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> Signed-off-by: Xingxing Su <suxingxing@loongson.cn>

You should document dt binding changes.

Thanks

- Jiaxun

> ---
>  drivers/irqchip/irq-loongson-liointc.c | 55 +++++++++++++++++++++-----
>  1 file changed, 46 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-loongson-liointc.c 
> b/drivers/irqchip/irq-loongson-liointc.c
> index 9ed1bc473663..496e73bde597 100644
> --- a/drivers/irqchip/irq-loongson-liointc.c
> +++ b/drivers/irqchip/irq-loongson-liointc.c
> @@ -20,6 +20,7 @@
>  
>  #define LIOINTC_CHIP_IRQ	32
>  #define LIOINTC_NUM_PARENT 4
> +#define LIOINTC_NUM_CORES	4
>  
>  #define LIOINTC_INTC_CHIP_START	0x20
>  
> @@ -42,6 +43,7 @@ struct liointc_handler_data {
>  struct liointc_priv {
>  	struct irq_chip_generic		*gc;
>  	struct liointc_handler_data	handler[LIOINTC_NUM_PARENT];
> +	void __iomem			*core_isr[LIOINTC_NUM_CORES];
>  	u8				map_cache[LIOINTC_CHIP_IRQ];
>  	bool				has_lpc_irq_errata;
>  };
> @@ -51,11 +53,12 @@ static void liointc_chained_handle_irq(struct 
> irq_desc *desc)
>  	struct liointc_handler_data *handler = 
> irq_desc_get_handler_data(desc);
>  	struct irq_chip *chip = irq_desc_get_chip(desc);
>  	struct irq_chip_generic *gc = handler->priv->gc;
> +	int core = get_ebase_cpunum() % LIOINTC_NUM_CORES;
>  	u32 pending;
>  
>  	chained_irq_enter(chip, desc);
>  
> -	pending = readl(gc->reg_base + LIOINTC_REG_INTC_STATUS);
> +	pending = readl(handler->priv->core_isr[core]);
>  
>  	if (!pending) {
>  		/* Always blame LPC IRQ if we have that bug */
> @@ -141,6 +144,15 @@ static void liointc_resume(struct irq_chip_generic *gc)
>  }
>  
>  static const char * const parent_names[] = {"int0", "int1", "int2", "int3"};
> +static const char * const core_reg_names[] = {"isr0", "isr1", "isr2", "isr3"};
> +
> +static void __iomem *liointc_get_reg_byname(struct device_node *node,
> +						const char *name)
> +{
> +	int index = of_property_match_string(node, "reg-names", name);
> +
> +	return of_iomap(node, index);
> +}
>  
>  int __init liointc_of_init(struct device_node *node,
>  				struct device_node *parent)
> @@ -159,10 +171,28 @@ int __init liointc_of_init(struct device_node *node,
>  	if (!priv)
>  		return -ENOMEM;
>  
> -	base = of_iomap(node, 0);
> -	if (!base) {
> -		err = -ENODEV;
> -		goto out_free_priv;
> +	if (of_device_is_compatible(node, "loongson,liointc-2.0")) {
> +		base = liointc_get_reg_byname(node, "main");
> +		if (!base) {
> +			err = -ENODEV;
> +			goto out_free_priv;
> +		}
> +		for (i = 0; i < LIOINTC_NUM_CORES; i++) {
> +			priv->core_isr[i] =
> +				liointc_get_reg_byname(node, core_reg_names[i]);
> +		}
> +		if (!priv->core_isr[0]) {
> +			err = -ENODEV;
> +			goto out_iounmap_base;
> +		}
> +	} else {
> +		base = of_iomap(node, 0);
> +		if (!base) {
> +			err = -ENODEV;
> +			goto out_free_priv;
> +		}
> +		for (i = 0; i < LIOINTC_NUM_CORES; i++)
> +			priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS;
>  	}
>  
>  	for (i = 0; i < LIOINTC_NUM_PARENT; i++) {
> @@ -172,7 +202,7 @@ int __init liointc_of_init(struct device_node *node,
>  	}
>  	if (!have_parent) {
>  		err = -ENODEV;
> -		goto out_iounmap;
> +		goto out_iounmap_isr;
>  	}
>  
>  	sz = of_property_read_variable_u32_array(node,
> @@ -183,7 +213,7 @@ int __init liointc_of_init(struct device_node *node,
>  	if (sz < 4) {
>  		pr_err("loongson-liointc: No parent_int_map\n");
>  		err = -ENODEV;
> -		goto out_iounmap;
> +		goto out_iounmap_isr;
>  	}
>  
>  	for (i = 0; i < LIOINTC_NUM_PARENT; i++)
> @@ -195,7 +225,7 @@ int __init liointc_of_init(struct device_node *node,
>  	if (!domain) {
>  		pr_err("loongson-liointc: cannot add IRQ domain\n");
>  		err = -EINVAL;
> -		goto out_iounmap;
> +		goto out_iounmap_isr;
>  	}
>  
>  	err = irq_alloc_domain_generic_chips(domain, 32, 1,
> @@ -260,7 +290,13 @@ int __init liointc_of_init(struct device_node *node,
>  
>  out_free_domain:
>  	irq_domain_remove(domain);
> -out_iounmap:
> +out_iounmap_isr:
> +	for (i = 0; i < LIOINTC_NUM_CORES; i++) {
> +		if (!priv->core_isr[i])
> +			continue;
> +		iounmap(priv->core_isr[i]);
> +	}
> +out_iounmap_base:
>  	iounmap(base);
>  out_free_priv:
>  	kfree(priv);
> @@ -270,3 +306,4 @@ int __init liointc_of_init(struct device_node *node,
>  
>  IRQCHIP_DECLARE(loongson_liointc_1_0, "loongson,liointc-1.0", 
> liointc_of_init);
>  IRQCHIP_DECLARE(loongson_liointc_1_0a, "loongson,liointc-1.0a", 
> liointc_of_init);
> +IRQCHIP_DECLARE(loongson_liointc_2_0, "loongson,liointc-2.0", 
> liointc_of_init);
> -- 
> 2.20.1
> 
>

-- 
- Jiaxun

Re: [PATCH 4/6] MIPS: Loongson64: Add 2K1000 early_printk_port

[Jiaxun Yang]

On Tue, Feb 9, 2021, at 5:32 PM, Qing Zhang wrote:
> Distinguish between 3A series CPU and 2K1000 CPU UART0.
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> Signed-off-by: Xingxing Su <suxingxing@loongson.cn>

Personally I don't like this kind of quirk.
Probably we should use earlycon as Arm later.

- Jiaxun

> ---
>  arch/mips/loongson64/init.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
> index 8bef1ebab72d..a8ad02d8d088 100644
> --- a/arch/mips/loongson64/init.c
> +++ b/arch/mips/loongson64/init.c
> @@ -120,7 +120,10 @@ void __init prom_init(void)
>  #endif
>  
>  	/* Hardcode to CPU UART 0 */
> -	setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
> +	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
> +		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE), 0, 1024);
> +	else
> +		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
>  
>  	register_smp_ops(&loongson3_smp_ops);
>  	board_nmi_handler_setup = mips_nmi_setup;
> -- 
> 2.20.1
> 
>

-- 
- Jiaxun