[U-Boot] Please pull u-boot-marvell/master

From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-marvell/master
Date: Wed, 19 Sep 2018 17:12:03 +0200	[thread overview]
Message-ID: <e0e3522d-063d-a02e-16af-e48b8caae019@denx.de> (raw)

Hi Tom,

please pull the Marvell U-Boot patches with these changes:

- Multiples updates to the turris boards / platform
- Changes / enhancements to the Marvell PHY drivers, mainly
   to support the turris platform
- Many fixes and enhancements to the pxa3xx NAND driver
- Fixes for the UART boot mode in kwboot
- Misc minor changes to other 32bit and 64bit boards

Thanks,
Stefan

The following changes since commit b57f1895b669e3fbdca486e7c40dfea00f22bb93:

   Merge git://git.denx.de/u-boot-x86 (2018-09-17 08:04:25 -0400)

are available in the Git repository at:

   git://www.denx.de/git/u-boot-marvell.git

for you to fetch changes up to e32ac37119394f2d3c579b2cdd549bed59fb583f:

   arm: mvebu: clearfog: enable eMMC boot partitions support (2018-09-19 14:00:06 +0200)

----------------------------------------------------------------
Baruch Siach (4):
       doc/git-mailrc: add Stefan Roese to the kirkwood alias
       arm64: mvebu: armada-8k: support environment in SD/eMMC
       dts: mvebu: mcbin: drop redundant SD slot node
       arm: mvebu: clearfog: enable eMMC boot partitions support

Boris Brezillon (1):
       mtd: nand: pxa3xx: Fix READOOB implementation

Chris Packham (2):
       Revert "arm: mvebu: fix boot from UART when in fallback mode"
       ARM: mach-mvebu: handle fall-back to UART boot

David Sniatkiwicz (1):
       fix: nand: pxa3xx: Add WA for eliminating flash ready timeout

Evgeni Dobrev (1):
       Kirkwood: NAS220: remove bootdelay from CONFIG_EXTRA_ENV_SETTINGS

Jon Nettleton (1):
       tools: kwboot: Make kwboot more robust on a38x

Konstantin Porotchkin (7):
       mtd: nand: pxa3xx: add support for Toshiba flash
       fix: nand: Replace hardcoded page chunk size with calculated one
       nand: pxa3xx: cosmetic: add comments to the timing layout structures
       nand: pxa3xx: Add support for 8KB page 4 and 8 bit ECC NAND
       fix: env: Fix the SPI flash device setup for DM mode
       fix: mvebu: Add SPI parameters for environment setup
       fix: cmd: mvebu: Exclude mvebu commands from SPL builds

Marek BehÃºn (6):
       phy: marvell: Support changing SERDES map in board file
       clk: armada-37xx-periph: Support changing clock parent and rate
       board: turris_mox: Fix watchdog macro name
       board: turris_mox: Enable PCI in defconfig
       arch/arm/dts: Update Turris Mox device tree
       board: turris_mox: Fixup U-Boot's device tree if PCIe connected

Ofer Heifetz (10):
       mtd: nand: pxa3xx_nand: Increase initial buffer size
       mtd: nand: pxa3xx_nand: use nand_to_mtd()
       mtd: nand: pxa3xx_nand: sync pxa3xx_nand_set_sdr_timing()
       mtd: nand: pxa3xx_nand: fix early spurious interrupt
       mtd: nand: pxa3xx-nand: fix random command timeouts
       nand: pxa3xx: Increase READ_ID buffer and make the size static
       mtd: pxa3xx_nand: Increase the initial chunk size
       mtd: pxa3xx_nand: Fix initial controller configuration
       mtd: pxa3xx_nand: Simplify pxa3xx_nand_scan
       mtd: nand: pxa3xx_nand: add support for partial chunks

Rabeeh Khoury (1):
       phy: marvell: add SATA comphy RX/TX polarity invert support

Victor Axelrod (1):
       mtd: nand: pxa3xx: add support for 2KB 8-bit flash

  MAINTAINERS                                     |   3 +-
  arch/arm/dts/armada-3720-turris-mox.dts         |  17 +-
  arch/arm/dts/armada-8040-mcbin.dts              |   8 -
  arch/arm/mach-mvebu/armada8k/cpu.c              |  24 ++
  arch/arm/mach-mvebu/include/mach/soc.h          |   8 +-
  arch/arm/mach-mvebu/spl.c                       |  15 +-
  board/CZ.NIC/turris_mox/turris_mox.c            |  88 ++++-
  cmd/Makefile                                    |   3 +-
  configs/turris_mox_defconfig                    |   6 +
  doc/git-mailrc                                  |   2 +-
  drivers/clk/mvebu/armada-37xx-periph.c          | 130 ++++++-
  drivers/mtd/nand/pxa3xx_nand.c                  | 447 ++++++++++++++++--------
  drivers/phy/marvell/comphy_a3700.h              |   2 +-
  drivers/phy/marvell/comphy_core.c               |  12 +-
  drivers/phy/marvell/{comphy.h => comphy_core.h} |  16 +-
  drivers/phy/marvell/comphy_cp110.c              |  21 +-
  drivers/phy/marvell/comphy_hpipe.h              |   6 +
  drivers/phy/marvell/comphy_mux.c                |   2 +-
  env/sf.c                                        |   3 +-
  include/configs/clearfog.h                      |   4 +
  include/configs/db-88f6820-gp.h                 |   6 +
  include/configs/mvebu_armada-8k.h               |   3 +
  include/configs/nas220.h                        |   1 -
  include/mvebu/comphy.h                          |  22 ++
  tools/kwboot.c                                  |  14 +-
  25 files changed, 664 insertions(+), 199 deletions(-)
  rename drivers/phy/marvell/{comphy.h => comphy_core.h} (96%)
  create mode 100644 include/mvebu/comphy.h