[PATCH 1/4] arm64: dts: qcom: sc7180: correct SPMI bus address cells

[PATCH 1/4] arm64: dts: qcom: sc7180: correct SPMI bus address cells

[Krzysztof Kozlowski]

The SPMI bus uses two address cells and zero size cells (secoond reg
entry - SPMI_USID - is not the size):

  spmi@c440000: #address-cells:0:0: 2 was expected

Fixes: 0f9dc5f09fbd ("arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index eb1e1ea12ff6..906fb9343bcc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3274,8 +3274,8 @@ spmi_bus: spmi@c440000 {
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 			cell-index = <0>;
-- 
2.34.1

[PATCH 2/4] arm64: dts: qcom: sc7280: correct SPMI bus address cells

[Krzysztof Kozlowski]

The SPMI bus uses two address cells and zero size cells (secoond reg
entry - SPMI_USID - is not the size):

  spmi@c440000: #address-cells:0:0: 2 was expected

Fixes: 14abf8dfe364 ("arm64: dts: qcom: sc7280: Add SPMI PMIC arbiter device for SC7280")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 448879d3d5cd..7c24c2129800 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4286,8 +4286,8 @@ spmi_bus: spmi@c440000 {
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
-- 
2.34.1

[PATCH 3/4] arm64: dts: qcom: sc8280xp: correct SPMI bus address cells

[Krzysztof Kozlowski]

The SPMI bus uses two address cells and zero size cells (secoond reg
entry - SPMI_USID - is not the size):

  spmi@c440000: #address-cells:0:0: 2 was expected

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 27f5c2f82338..3cb4ca6c53eb 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1947,8 +1947,8 @@ spmi_bus: spmi@c440000 {
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
-- 
2.34.1

[PATCH 4/4] arm64: dts: qcom: rename AOSS QMP node to pmu

[Krzysztof Kozlowski]

The Always On Subsystem (AOSS) QMP is not a power domain controller
since commit 135780456218 ("arm64: dts: qcom: sc7180: Use QMP property
to control load state") and few others.  In fact, it was never a power
domain controller but rather control of power state of remote
processors.  This power state control is know handled differently, thus
the AOSS QMP nodes do not have power-domain-cells:

  sc7280-idp.dtb: power-controller@c300000: '#power-domain-cells' is a required property
  From schema: Documentation/devicetree/bindings/power/power-domain.yaml

AOSS QMP is an interface to the actuall AOSS subsystem responsible for
some of power management functions, thus let's call the nodes as "pmu" -
Power Management Unit.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/sm6350.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi   | 2 +-
 9 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 906fb9343bcc..7e781570b2c6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3248,7 +3248,7 @@ aoss_reset: reset-controller@c2a0000 {
 			#reset-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 7c24c2129800..b08ddeb7bcec 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4257,7 +4257,7 @@ aoss_reset: reset-controller@c2a0000 {
 			#reset-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 3cb4ca6c53eb..e04f1f751881 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1921,7 +1921,7 @@ tsens1: thermal-sensor@c265000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5f1f7cb52c90..2e15a003825e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4965,7 +4965,7 @@ aoss_reset: reset-controller@c2a0000 {
 			#reset-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 0f01ff4feb55..bb20fed0f4f0 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1273,7 +1273,7 @@ tsens1: thermal-sensor@c265000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x1000>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index d1b64280ab0b..ad6902b13a71 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3589,7 +3589,7 @@ pdc: interrupt-controller@b220000 {
 			interrupt-controller;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fbbbae29e0c2..6faf13ed90c1 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3741,7 +3741,7 @@ tsens1: thermal-sensor@c265000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 49db223a0777..519e436aeab9 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1717,7 +1717,7 @@ tsens1: thermal-sensor@c265000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index e0d30dadbf8b..234fe6549fe0 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2453,7 +2453,7 @@ tsens1: thermal-sensor@c265000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: pmu@c300000 {
 			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
-- 
2.34.1

Re: [PATCH 1/4] arm64: dts: qcom: sc7180: correct SPMI bus address cells

[Konrad Dybcio]

On 12.12.2022 14:32, Krzysztof Kozlowski wrote:
> The SPMI bus uses two address cells and zero size cells (secoond reg
secoond sounds very Dutch ;)

> entry - SPMI_USID - is not the size):
> 
>   spmi@c440000: #address-cells:0:0: 2 was expected
> 
> Fixes: 0f9dc5f09fbd ("arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Interesting that it worked with this wrong..

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index eb1e1ea12ff6..906fb9343bcc 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -3274,8 +3274,8 @@ spmi_bus: spmi@c440000 {
>  			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>  			qcom,ee = <0>;
>  			qcom,channel = <0>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
>  			interrupt-controller;
>  			#interrupt-cells = <4>;
>  			cell-index = <0>;

Re: [PATCH 2/4] arm64: dts: qcom: sc7280: correct SPMI bus address cells

[Konrad Dybcio]

On 12.12.2022 14:33, Krzysztof Kozlowski wrote:
> The SPMI bus uses two address cells and zero size cells (secoond reg
secoond, a secoond time

> entry - SPMI_USID - is not the size):
> 
>   spmi@c440000: #address-cells:0:0: 2 was expected
> 
> Fixes: 14abf8dfe364 ("arm64: dts: qcom: sc7280: Add SPMI PMIC arbiter device for SC7280")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 448879d3d5cd..7c24c2129800 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -4286,8 +4286,8 @@ spmi_bus: spmi@c440000 {
>  			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>  			qcom,ee = <0>;
>  			qcom,channel = <0>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
>  			interrupt-controller;
>  			#interrupt-cells = <4>;
>  		};

Re: [PATCH 3/4] arm64: dts: qcom: sc8280xp: correct SPMI bus address cells

[Konrad Dybcio]

On 12.12.2022 14:33, Krzysztof Kozlowski wrote:
> The SPMI bus uses two address cells and zero size cells (secoond reg
secoond

> entry - SPMI_USID - is not the size):
> 
>   spmi@c440000: #address-cells:0:0: 2 was expected
> 
> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 27f5c2f82338..3cb4ca6c53eb 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -1947,8 +1947,8 @@ spmi_bus: spmi@c440000 {
>  			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>  			qcom,ee = <0>;
>  			qcom,channel = <0>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
>  			interrupt-controller;
>  			#interrupt-cells = <4>;
>  		};

Re: [PATCH 4/4] arm64: dts: qcom: rename AOSS QMP node to pmu

[Konrad Dybcio]

On 12.12.2022 14:33, Krzysztof Kozlowski wrote:
> The Always On Subsystem (AOSS) QMP is not a power domain controller
> since commit 135780456218 ("arm64: dts: qcom: sc7180: Use QMP property
> to control load state") and few others.  In fact, it was never a power
> domain controller but rather control of power state of remote
> processors.  This power state control is know handled differently, thus
> the AOSS QMP nodes do not have power-domain-cells:
> 
>   sc7280-idp.dtb: power-controller@c300000: '#power-domain-cells' is a required property
>   From schema: Documentation/devicetree/bindings/power/power-domain.yaml
> 
> AOSS QMP is an interface to the actuall AOSS subsystem responsible for
> some of power management functions, thus let's call the nodes as "pmu" -
> Power Management Unit.
power-management@ is used on apple and rockchip and pmu is very
ambiguous (power management or performance measurement unit).

Konrad
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi   | 2 +-
>  arch/arm64/boot/dts/qcom/sc7280.dtsi   | 2 +-
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
>  arch/arm64/boot/dts/qcom/sdm845.dtsi   | 2 +-
>  arch/arm64/boot/dts/qcom/sm6350.dtsi   | 2 +-
>  arch/arm64/boot/dts/qcom/sm8150.dtsi   | 2 +-
>  arch/arm64/boot/dts/qcom/sm8250.dtsi   | 2 +-
>  arch/arm64/boot/dts/qcom/sm8350.dtsi   | 2 +-
>  arch/arm64/boot/dts/qcom/sm8450.dtsi   | 2 +-
>  9 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 906fb9343bcc..7e781570b2c6 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -3248,7 +3248,7 @@ aoss_reset: reset-controller@c2a0000 {
>  			#reset-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x400>;
>  			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 7c24c2129800..b08ddeb7bcec 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -4257,7 +4257,7 @@ aoss_reset: reset-controller@c2a0000 {
>  			#reset-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x400>;
>  			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 3cb4ca6c53eb..e04f1f751881 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -1921,7 +1921,7 @@ tsens1: thermal-sensor@c265000 {
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x400>;
>  			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 5f1f7cb52c90..2e15a003825e 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -4965,7 +4965,7 @@ aoss_reset: reset-controller@c2a0000 {
>  			#reset-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x400>;
>  			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 0f01ff4feb55..bb20fed0f4f0 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -1273,7 +1273,7 @@ tsens1: thermal-sensor@c265000 {
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x1000>;
>  			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index d1b64280ab0b..ad6902b13a71 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3589,7 +3589,7 @@ pdc: interrupt-controller@b220000 {
>  			interrupt-controller;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0x0 0x0c300000 0x0 0x400>;
>  			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index fbbbae29e0c2..6faf13ed90c1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3741,7 +3741,7 @@ tsens1: thermal-sensor@c265000 {
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x400>;
>  			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 49db223a0777..519e436aeab9 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1717,7 +1717,7 @@ tsens1: thermal-sensor@c265000 {
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x400>;
>  			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index e0d30dadbf8b..234fe6549fe0 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2453,7 +2453,7 @@ tsens1: thermal-sensor@c265000 {
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> -		aoss_qmp: power-controller@c300000 {
> +		aoss_qmp: pmu@c300000 {
>  			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
>  			reg = <0 0x0c300000 0 0x400>;
>  			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP

Re: [PATCH 1/4] arm64: dts: qcom: sc7180: correct SPMI bus address cells

[Krzysztof Kozlowski]

On 12/12/2022 14:35, Konrad Dybcio wrote:
> 
> 
> On 12.12.2022 14:32, Krzysztof Kozlowski wrote:
>> The SPMI bus uses two address cells and zero size cells (secoond reg
> secoond sounds very Dutch ;)

Indeed...

Best regards,
Krzysztof

Re: [PATCH 4/4] arm64: dts: qcom: rename AOSS QMP node to pmu

[Krzysztof Kozlowski]

On 12/12/2022 14:38, Konrad Dybcio wrote:
> 
> 
> On 12.12.2022 14:33, Krzysztof Kozlowski wrote:
>> The Always On Subsystem (AOSS) QMP is not a power domain controller
>> since commit 135780456218 ("arm64: dts: qcom: sc7180: Use QMP property
>> to control load state") and few others.  In fact, it was never a power
>> domain controller but rather control of power state of remote
>> processors.  This power state control is know handled differently, thus
>> the AOSS QMP nodes do not have power-domain-cells:
>>
>>   sc7280-idp.dtb: power-controller@c300000: '#power-domain-cells' is a required property
>>   From schema: Documentation/devicetree/bindings/power/power-domain.yaml
>>
>> AOSS QMP is an interface to the actuall AOSS subsystem responsible for
>> some of power management functions, thus let's call the nodes as "pmu" -
>> Power Management Unit.
> power-management@ is used on apple and rockchip and pmu is very
> ambiguous (power management or performance measurement unit).

Sure, can be power-management. Samsung uses also pmu, but indeed it is
easy to confuse with PMU counters.

Best regards,
Krzysztof

Re: [PATCH 1/4] arm64: dts: qcom: sc7180: correct SPMI bus address cells

[Stephen Boyd]

Quoting Krzysztof Kozlowski (2022-12-12 05:32:59)
> The SPMI bus uses two address cells and zero size cells (secoond reg
> entry - SPMI_USID - is not the size):
>
>   spmi@c440000: #address-cells:0:0: 2 was expected
>
> Fixes: 0f9dc5f09fbd ("arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH 2/4] arm64: dts: qcom: sc7280: correct SPMI bus address cells

[Stephen Boyd]

Quoting Krzysztof Kozlowski (2022-12-12 05:33:00)
> The SPMI bus uses two address cells and zero size cells (secoond reg
> entry - SPMI_USID - is not the size):
>
>   spmi@c440000: #address-cells:0:0: 2 was expected
>
> Fixes: 14abf8dfe364 ("arm64: dts: qcom: sc7280: Add SPMI PMIC arbiter device for SC7280")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH 3/4] arm64: dts: qcom: sc8280xp: correct SPMI bus address cells

[Stephen Boyd]

Quoting Krzysztof Kozlowski (2022-12-12 05:33:01)
> The SPMI bus uses two address cells and zero size cells (secoond reg
> entry - SPMI_USID - is not the size):
>
>   spmi@c440000: #address-cells:0:0: 2 was expected
>
> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH 4/4] arm64: dts: qcom: rename AOSS QMP node to pmu

[Stephen Boyd]

Quoting Krzysztof Kozlowski (2022-12-12 05:33:02)
> The Always On Subsystem (AOSS) QMP is not a power domain controller
> since commit 135780456218 ("arm64: dts: qcom: sc7180: Use QMP property
> to control load state") and few others.  In fact, it was never a power
> domain controller but rather control of power state of remote
> processors.  This power state control is know handled differently, thus
> the AOSS QMP nodes do not have power-domain-cells:
>
>   sc7280-idp.dtb: power-controller@c300000: '#power-domain-cells' is a required property
>   From schema: Documentation/devicetree/bindings/power/power-domain.yaml
>
> AOSS QMP is an interface to the actuall AOSS subsystem responsible for
> some of power management functions, thus let's call the nodes as "pmu" -
> Power Management Unit.

Isn't 'pmu' a performance monitoring unit?

Re: [PATCH 4/4] arm64: dts: qcom: rename AOSS QMP node to pmu

[Krzysztof Kozlowski]

On 12/12/2022 20:08, Stephen Boyd wrote:
> Quoting Krzysztof Kozlowski (2022-12-12 05:33:02)
>> The Always On Subsystem (AOSS) QMP is not a power domain controller
>> since commit 135780456218 ("arm64: dts: qcom: sc7180: Use QMP property
>> to control load state") and few others.  In fact, it was never a power
>> domain controller but rather control of power state of remote
>> processors.  This power state control is know handled differently, thus
>> the AOSS QMP nodes do not have power-domain-cells:
>>
>>   sc7280-idp.dtb: power-controller@c300000: '#power-domain-cells' is a required property
>>   From schema: Documentation/devicetree/bindings/power/power-domain.yaml
>>
>> AOSS QMP is an interface to the actuall AOSS subsystem responsible for
>> some of power management functions, thus let's call the nodes as "pmu" -
>> Power Management Unit.
> 
> Isn't 'pmu' a performance monitoring unit?

No. PMU is whatever you call it... ARM calls it Performance Monitoring
Unit, Samsung and Rockchip (and maybe others) call it Power Management
Unit. It's just an acronym.

Best regards,
Krzysztof

Re: [PATCH 3/4] arm64: dts: qcom: sc8280xp: correct SPMI bus address cells

[Johan Hovold]

On Mon, Dec 12, 2022 at 02:33:01PM +0100, Krzysztof Kozlowski wrote:
> The SPMI bus uses two address cells and zero size cells (secoond reg
> entry - SPMI_USID - is not the size):
> 
>   spmi@c440000: #address-cells:0:0: 2 was expected
> 
> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 27f5c2f82338..3cb4ca6c53eb 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -1947,8 +1947,8 @@ spmi_bus: spmi@c440000 {
>  			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>  			qcom,ee = <0>;
>  			qcom,channel = <0>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
>  			interrupt-controller;
>  			#interrupt-cells = <4>;
>  		};

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>