* webui not working for me
@ 2020-01-04 1:38 Vijay Khemka
2020-01-06 5:38 ` Gunnar Mills
0 siblings, 1 reply; 14+ messages in thread
From: Vijay Khemka @ 2020-01-04 1:38 UTC (permalink / raw)
To: openbmc
[-- Attachment #1: Type: text/plain, Size: 1095 bytes --]
Hi,
I am trying to use webui but not getting anything working. I might be missing some steps.
I did following.
1. npm install in repo directory.
2. Recompiled bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION on and transferred bmcweb to target.
3. Run chrome browser with http://bmc-ip
4. I see blank page. Then tried with https and accepted certificates.
5. But still I see page with “refused to connect”
Please help me what else I need to do. I got 2 warning while installing NPM.
npm WARN bootstrap@4.4.1 requires a peer of jquery@1.9.1 - 3 but none is installed. You must install peer dependencies yourself.
npm WARN bootstrap@4.4.1 requires a peer of popper.js@^1.16.0 but none is installed. You must install peer dependencies yourself.
audited 12116 packages in 4.87s
6 packages are looking for funding
run `npm fund` for details
found 2 moderate severity vulnerabilities
run `npm audit fix` to fix them, or `npm audit` for details
I tried fixing this by using “audit fix” but no success.
Regards
-Vijay
[-- Attachment #2: Type: text/html, Size: 7672 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-04 1:38 webui not working for me Vijay Khemka
@ 2020-01-06 5:38 ` Gunnar Mills
2020-01-06 18:31 ` Vijay Khemka
2020-01-06 19:27 ` Vijay Khemka
0 siblings, 2 replies; 14+ messages in thread
From: Gunnar Mills @ 2020-01-06 5:38 UTC (permalink / raw)
To: Vijay Khemka, openbmc
[-- Attachment #1: Type: text/plain, Size: 1410 bytes --]
On 1/3/2020 7:38 PM, Vijay Khemka wrote:
>
>
> I am trying to use webui but not getting anything working. I might be
> missing some steps.
>
> I did following.
>
> 1. npm install in repo directory.
> 2. Recompiled bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION on
> and transferred bmcweb to target.
> 3. Run chrome browser with http://bmc-ip
> 4. I see blank page. Then tried with https and accepted certificates.
> 5. But still I see page with “refused to connect”
>
Hi Vijay,
Are you trying to run the webui locally (e.g. npm run-script server and
then browse to http://localhost:8080 )?
If so, something more like:
npm install
npm run-script server
Recompile bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION and
BMCWEB_INSECURE_DISABLE_CSRF_PREVENTION and transfer bmcweb to target.
Go to https://bmc-ip and accept the certificate
Go to http://localhost:8080 (could be running at a different port, check
npm run-script server output) and point at bmc-ip
If you are trying to build the webui for the BMC (npm run-script build)
and scp the files over, do you need to include the webui package group?
https://github.com/openbmc/openbmc/commit/fef8abbc78154abbd86ab9f0704e65ccb422f4de
The webui recipe creates the webui directory structure on the BMC.
> Please help me what else I need to do. I got 2 warning while
> installing NPM.
>
The warnings should not matter.
- Gunnar
[-- Attachment #2: Type: text/html, Size: 7862 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-06 5:38 ` Gunnar Mills
@ 2020-01-06 18:31 ` Vijay Khemka
2020-01-06 19:27 ` Vijay Khemka
1 sibling, 0 replies; 14+ messages in thread
From: Vijay Khemka @ 2020-01-06 18:31 UTC (permalink / raw)
To: Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 2799 bytes --]
Thanks Gunnar,
I didn’t understand by running webui locally. I am not running on BMC. I am just running in my mac laptop and trying to connect to BMC via browser.
Regards
-Vijay
From: Gunnar Mills <gmills@linux.vnet.ibm.com>
Date: Sunday, January 5, 2020 at 9:39 PM
To: Vijay Khemka <vijaykhemka@fb.com>, "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Subject: Re: webui not working for me
On 1/3/2020 7:38 PM, Vijay Khemka wrote:
I am trying to use webui but not getting anything working. I might be missing some steps.
I did following.
1. npm install in repo directory.
2. Recompiled bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION on and transferred bmcweb to target.
3. Run chrome browser with http://bmc-ip<https://urldefense.proofpoint.com/v2/url?u=http-3A__bmc-2Dip&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=HQJMeAs5VppEftgdpNH7nd7V3Zx4xpf4DEyqto7U7_Q&e=>
4. I see blank page. Then tried with https and accepted certificates.
5. But still I see page with “refused to connect”
Hi Vijay,
Are you trying to run the webui locally (e.g. npm run-script server and then browse to http://localhost:8080<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A8080&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=r_P53gY50VmvMsyQPhxD35FdzONyzQNBH3GUYTerV4M&e=> )?
If so, something more like:
npm install
npm run-script server
Recompile bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION and BMCWEB_INSECURE_DISABLE_CSRF_PREVENTION and transfer bmcweb to target.
Go to https://bmc-ip<https://urldefense.proofpoint.com/v2/url?u=https-3A__bmc-2Dip&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=gdm3UjRQnu_XRVgmp5SVt9W82Tl-uoCarovDoHDdD1Y&e=> and accept the certificate
Go to http://localhost:8080<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A8080&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=r_P53gY50VmvMsyQPhxD35FdzONyzQNBH3GUYTerV4M&e=> (could be running at a different port, check npm run-script server output) and point at bmc-ip
If you are trying to build the webui for the BMC (npm run-script build) and scp the files over, do you need to include the webui package group?
https://github.com/openbmc/openbmc/commit/fef8abbc78154abbd86ab9f0704e65ccb422f4de
The webui recipe creates the webui directory structure on the BMC.
Please help me what else I need to do. I got 2 warning while installing NPM.
The warnings should not matter.
- Gunnar
[-- Attachment #2: Type: text/html, Size: 9647 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-06 5:38 ` Gunnar Mills
2020-01-06 18:31 ` Vijay Khemka
@ 2020-01-06 19:27 ` Vijay Khemka
2020-01-06 23:53 ` Gunnar Mills
1 sibling, 1 reply; 14+ messages in thread
From: Vijay Khemka @ 2020-01-06 19:27 UTC (permalink / raw)
To: Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 5240 bytes --]
Hi Gunnar,
Now I am following below steps. I am running all these from my mac laptop. Nothing on BMC, just copied bmcweb on BMC.
1. npm install in repo directory.
2. npm run-script server
3. Recompiled bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION and BMCWEB_INSECURE_DISABLE_CSRF_PREVENTION and transfered bmcweb to target.
4. Go to https://bmc-ip<https://urldefense.proofpoint.com/v2/url?u=https-3A__bmc-2Dip&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=gdm3UjRQnu_XRVgmp5SVt9W82Tl-uoCarovDoHDdD1Y&e=>, no certificates asked, says certificate expired on Dec 29 1979.
Go to http://localhost:8080<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A8080&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=r_P53gY50VmvMsyQPhxD35FdzONyzQNBH3GUYTerV4M&e=>, Don’t see any port as output for “npm run-script server”.
vijaykhemka-mbp:phosphor-webui vijaykhemka$ npm run-script server
> phosphor-webui@2.8.0-dev server /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui
> webpack-dev-server --history-api-fallback --inline --progress --devtool source-map --mode development
10% building 1/1 modules 0 activeℹ 「wds」: Project is running at http://localhost:18898/
ℹ 「wds」: webpack output is served from /
ℹ 「wds」: Content not from webpack is served from ./src/public
ℹ 「wds」: 404s will fallback to /index.html
10% building 1/3 modules 2 active ...babel-loader/lib/index.js??ref--4!/Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/webpack-dev-server/client/index.js?http://localhost:18898Browserslist: caniuse-lite is outdated. Please run next command `npm update`
67% building 545/571 modules 26 active /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/core-js/modules/es.reflect.is-extensible.js[BABEL] Note: The code generator has deoptimised the styling of /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/angular/angular.js as it exceeds the max of 500KB.
66% building 557/590 modules 33 active /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/core-js/modules/es.object.to-string.js[BABEL] Note: The code generator has deoptimised the styling of /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/text-encoding/lib/encoding-indexes.js as it exceeds the max of 500KB.
ℹ 「wdm」: 761 modules
ℹ 「wdm」: Compiled successfully.
Regards
-Vijay
From: Gunnar Mills <gmills@linux.vnet.ibm.com>
Date: Sunday, January 5, 2020 at 9:39 PM
To: Vijay Khemka <vijaykhemka@fb.com>, "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Subject: Re: webui not working for me
On 1/3/2020 7:38 PM, Vijay Khemka wrote:
I am trying to use webui but not getting anything working. I might be missing some steps.
I did following.
1. npm install in repo directory.
2. Recompiled bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION on and transferred bmcweb to target.
3. Run chrome browser with http://bmc-ip<https://urldefense.proofpoint.com/v2/url?u=http-3A__bmc-2Dip&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=HQJMeAs5VppEftgdpNH7nd7V3Zx4xpf4DEyqto7U7_Q&e=>
4. I see blank page. Then tried with https and accepted certificates.
5. But still I see page with “refused to connect”
Hi Vijay,
Are you trying to run the webui locally (e.g. npm run-script server and then browse to http://localhost:8080<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A8080&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=r_P53gY50VmvMsyQPhxD35FdzONyzQNBH3GUYTerV4M&e=> )?
If so, something more like:
npm install
npm run-script server
Recompile bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION and BMCWEB_INSECURE_DISABLE_CSRF_PREVENTION and transfer bmcweb to target.
Go to https://bmc-ip<https://urldefense.proofpoint.com/v2/url?u=https-3A__bmc-2Dip&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=gdm3UjRQnu_XRVgmp5SVt9W82Tl-uoCarovDoHDdD1Y&e=> and accept the certificate
Go to http://localhost:8080<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A8080&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=r_P53gY50VmvMsyQPhxD35FdzONyzQNBH3GUYTerV4M&e=> (could be running at a different port, check npm run-script server output) and point at bmc-ip
If you are trying to build the webui for the BMC (npm run-script build) and scp the files over, do you need to include the webui package group?
https://github.com/openbmc/openbmc/commit/fef8abbc78154abbd86ab9f0704e65ccb422f4de
The webui recipe creates the webui directory structure on the BMC.
Please help me what else I need to do. I got 2 warning while installing NPM.
The warnings should not matter.
- Gunnar
[-- Attachment #2: Type: text/html, Size: 19085 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-06 19:27 ` Vijay Khemka
@ 2020-01-06 23:53 ` Gunnar Mills
2020-01-07 0:19 ` Vijay Khemka
0 siblings, 1 reply; 14+ messages in thread
From: Gunnar Mills @ 2020-01-06 23:53 UTC (permalink / raw)
To: Vijay Khemka, openbmc
[-- Attachment #1: Type: text/plain, Size: 2869 bytes --]
On 1/6/2020 1:27 PM, Vijay Khemka wrote:
>
> Hi Gunnar,
>
> Now I am following below steps. I am running all these from my mac
> laptop. Nothing on BMC, just copied bmcweb on BMC.
>
> 1. npm install in repo directory.
> 2. npm run-script server
> 3. Recompiled bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION and
> BMCWEB_INSECURE_DISABLE_CSRF_PREVENTION and transfered bmcweb to
> target.
> 4. Go to https://bmc-ip
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__bmc-2Dip&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=gdm3UjRQnu_XRVgmp5SVt9W82Tl-uoCarovDoHDdD1Y&e=>,
> no certificates asked, says certificate expired on Dec 29 1979.
> Go to http://localhost:8080
> <https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A8080&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=r_P53gY50VmvMsyQPhxD35FdzONyzQNBH3GUYTerV4M&e=>,
> Don’t see any port as output for “npm run-script server”.
>
Looks like it is :18898 for you. "Project is running at
http://localhost:18898/"
> vijaykhemka-mbp:phosphor-webui vijaykhemka$ npm run-script server
>
> > phosphor-webui@2.8.0-dev server
> /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui
>
> > webpack-dev-server --history-api-fallback --inline --progress
> --devtool source-map --mode development
>
> *10% building 1/1 modules 0 active*ℹ「wds」: Project is running at
> http://localhost:18898/
>
> ℹ「wds」: webpack output is served from /
>
> ℹ「wds」: Content not from webpack is served from ./src/public
>
> ℹ「wds」: 404s will fallback to /index.html
>
> *10% building 1/3 modules 2 active
> ...babel-loader/lib/index.js??ref--4!/Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/webpack-dev-server/client/index.js?http://localhost:18898*Browserslist:
> caniuse-lite is outdated. Please run next command `npm update`
>
> *67% building 545/571 modules 26 active
> /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/core-js/modules/es.reflect.is-extensible.js*[BABEL]
> Note: The code generator has deoptimised the styling of
> /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/angular/angular.js
> as it exceeds the max of 500KB.
>
> *66% building 557/590 modules 33 active
> /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/core-js/modules/es.object.to-string.js*[BABEL]
> Note: The code generator has deoptimised the styling of
> /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/text-encoding/lib/encoding-indexes.js
> as it exceeds the max of 500KB.
>
> ℹ「wdm」: 761 modules
>
> ℹ「wdm」: Compiled successfully.
>
> Regards
>
> -Vijay
>
[-- Attachment #2: Type: text/html, Size: 16018 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-06 23:53 ` Gunnar Mills
@ 2020-01-07 0:19 ` Vijay Khemka
2020-01-07 0:24 ` Gunnar Mills
0 siblings, 1 reply; 14+ messages in thread
From: Vijay Khemka @ 2020-01-07 0:19 UTC (permalink / raw)
To: Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 4122 bytes --]
Yes, I am able to get it but I can’t see any sensors or, event logs as well as system logs. I discussed with Kathy and it seems she has different patch for sensors to work from intel-bmc branch. But that patch doesn’t seem to apply in this upstream repo.
Do you have any ideas what could be wrong with sensors. I am using dbus-sensors.
Regards
-Vijay
From: Gunnar Mills <gmills@linux.vnet.ibm.com>
Date: Monday, January 6, 2020 at 3:53 PM
To: Vijay Khemka <vijaykhemka@fb.com>, "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Subject: Re: webui not working for me
On 1/6/2020 1:27 PM, Vijay Khemka wrote:
Hi Gunnar,
Now I am following below steps. I am running all these from my mac laptop. Nothing on BMC, just copied bmcweb on BMC.
1. npm install in repo directory.
2. npm run-script server
3. Recompiled bmcweb with BMCWEB_INSECURE_DISABLE_XSS_PREVENTION and BMCWEB_INSECURE_DISABLE_CSRF_PREVENTION and transfered bmcweb to target.
4. Go to https://bmc-ip<https://urldefense.proofpoint.com/v2/url?u=https-3A__bmc-2Dip&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=gdm3UjRQnu_XRVgmp5SVt9W82Tl-uoCarovDoHDdD1Y&e=>, no certificates asked, says certificate expired on Dec 29 1979.
Go to http://localhost:8080<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A8080&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=kJtGvuus9oDRupym2EBb90B5bKvSi-pPMLdfIXHUGAM&s=r_P53gY50VmvMsyQPhxD35FdzONyzQNBH3GUYTerV4M&e=>, Don’t see any port as output for “npm run-script server”.
Looks like it is :18898 for you. "Project is running at http://localhost:18898/<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A18898_&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=ZNcKeBTnd2pStghg3o_6zvefHFDgsJYCFAR7g5N2ThU&s=T-XmLi5Z4UaCVOMuVGsVc4u7OPlEmoCjubR_sLUMSjA&e=>"
vijaykhemka-mbp:phosphor-webui vijaykhemka$ npm run-script server
> phosphor-webui@2.8.0-dev<mailto:phosphor-webui@2.8.0-dev> server /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui
> webpack-dev-server --history-api-fallback --inline --progress --devtool source-map --mode development
10% building 1/1 modules 0 activeℹ 「wds」: Project is running at http://localhost:18898/<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A18898_&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=ZNcKeBTnd2pStghg3o_6zvefHFDgsJYCFAR7g5N2ThU&s=T-XmLi5Z4UaCVOMuVGsVc4u7OPlEmoCjubR_sLUMSjA&e=>
ℹ 「wds」: webpack output is served from /
ℹ 「wds」: Content not from webpack is served from ./src/public
ℹ 「wds」: 404s will fallback to /index.html
10% building 1/3 modules 2 active ...babel-loader/lib/index.js??ref--4!/Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/webpack-dev-server/client/index.js?http://localhost:18898<https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-3A18898&d=DwMDaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=ZNcKeBTnd2pStghg3o_6zvefHFDgsJYCFAR7g5N2ThU&s=RLBMFH13z8E8EK1cMfgTM5gNvoBUmW6fEjR3EsnszzA&e=>Browserslist: caniuse-lite is outdated. Please run next command `npm update`
67% building 545/571 modules 26 active /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/core-js/modules/es.reflect.is-extensible.js[BABEL] Note: The code generator has deoptimised the styling of /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/angular/angular.js as it exceeds the max of 500KB.
66% building 557/590 modules 33 active /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/core-js/modules/es.object.to-string.js[BABEL] Note: The code generator has deoptimised the styling of /Users/vijaykhemka/proj/lf/gh/new-gh/gh-repo/phosphor-webui/node_modules/text-encoding/lib/encoding-indexes.js as it exceeds the max of 500KB.
ℹ 「wdm」: 761 modules
ℹ 「wdm」: Compiled successfully.
Regards
-Vijay
[-- Attachment #2: Type: text/html, Size: 14992 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-07 0:19 ` Vijay Khemka
@ 2020-01-07 0:24 ` Gunnar Mills
2020-01-07 0:29 ` Vijay Khemka
0 siblings, 1 reply; 14+ messages in thread
From: Gunnar Mills @ 2020-01-07 0:24 UTC (permalink / raw)
To: Vijay Khemka, openbmc
[-- Attachment #1: Type: text/plain, Size: 643 bytes --]
On 1/6/2020 6:19 PM, Vijay Khemka wrote:
>
> Yes, I am able to get it but I can’t see any sensors or, event logs as
> well as system logs. I discussed with Kathy and it seems she has
> different patch for sensors to work from intel-bmc branch. But that
> patch doesn’t seem to apply in this upstream repo.
>
> Do you have any ideas what could be wrong with sensors. I am using
> dbus-sensors.
>
Anything in the browser console?
The sensors page is making a call to
`/xyz/openbmc_project/sensors/enumerate`
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L916
[-- Attachment #2: Type: text/html, Size: 5714 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-07 0:24 ` Gunnar Mills
@ 2020-01-07 0:29 ` Vijay Khemka
2020-01-07 0:39 ` Gunnar Mills
0 siblings, 1 reply; 14+ messages in thread
From: Vijay Khemka @ 2020-01-07 0:29 UTC (permalink / raw)
To: Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 919 bytes --]
From: Gunnar Mills <gmills@linux.vnet.ibm.com>
Date: Monday, January 6, 2020 at 4:24 PM
To: Vijay Khemka <vijaykhemka@fb.com>, "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Subject: Re: webui not working for me
On 1/6/2020 6:19 PM, Vijay Khemka wrote:
Yes, I am able to get it but I can’t see any sensors or, event logs as well as system logs. I discussed with Kathy and it seems she has different patch for sensors to work from intel-bmc branch. But that patch doesn’t seem to apply in this upstream repo.
Do you have any ideas what could be wrong with sensors. I am using dbus-sensors.
Anything in the browser console?
It says on page “there are no sensors available”
The sensors page is making a call to `/xyz/openbmc_project/sensors/enumerate`
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L916
[-- Attachment #2: Type: text/html, Size: 5128 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-07 0:29 ` Vijay Khemka
@ 2020-01-07 0:39 ` Gunnar Mills
2020-01-07 0:45 ` Vijay Khemka
2020-01-07 1:13 ` Vijay Khemka
0 siblings, 2 replies; 14+ messages in thread
From: Gunnar Mills @ 2020-01-07 0:39 UTC (permalink / raw)
To: Vijay Khemka, openbmc
[-- Attachment #1: Type: text/plain, Size: 393 bytes --]
On 1/6/2020 6:29 PM, Vijay Khemka wrote:
>
> It says on page “there are no sensors available”
>
>
A curl call to /xyz/openbmc_project/sensors/enumerate returns all the
sensors correctly ?
If so, probably will need to add some console.log()s to that function
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L912
[-- Attachment #2: Type: text/html, Size: 3931 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-07 0:39 ` Gunnar Mills
@ 2020-01-07 0:45 ` Vijay Khemka
2020-01-09 22:08 ` Pine, Kathryn ElaineX
2020-01-07 1:13 ` Vijay Khemka
1 sibling, 1 reply; 14+ messages in thread
From: Vijay Khemka @ 2020-01-07 0:45 UTC (permalink / raw)
To: Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 901 bytes --]
From: Gunnar Mills <gmills@linux.vnet.ibm.com>
Date: Monday, January 6, 2020 at 4:40 PM
To: Vijay Khemka <vijaykhemka@fb.com>, "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Subject: Re: webui not working for me
On 1/6/2020 6:29 PM, Vijay Khemka wrote:
It says on page “there are no sensors available”
A curl call to /xyz/openbmc_project/sensors/enumerate returns all the sensors correctly ?
I have not used any curl command here. Please let me know what curl command to use. But intel is using redfish method to get these data.
https://github.com/Intel-BMC/phosphor-webui/blob/e34f46c191a4c993608ac64a867920fb640e8133/app/common/services/api-utils.js#L932
If so, probably will need to add some console.log()s to that function
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L912
[-- Attachment #2: Type: text/html, Size: 5290 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-07 0:39 ` Gunnar Mills
2020-01-07 0:45 ` Vijay Khemka
@ 2020-01-07 1:13 ` Vijay Khemka
1 sibling, 0 replies; 14+ messages in thread
From: Vijay Khemka @ 2020-01-07 1:13 UTC (permalink / raw)
To: Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 1427 bytes --]
Alright I am getting data from curl command
curl -k -H "X-Auth-Token: $token" -X GET https://${bmc}/xyz/openbmc_project/sensors/enumerate
"/xyz/openbmc_project/sensors/temperature/Core_16_CPU1": {
"Associations": [
[
"chassis",
"all_sensors",
"/xyz/openbmc_project/inventory/system/board/TiogaPass_Baseboard"
]
],
"CriticalAlarmHigh": false,
"CriticalHigh": 89.0,
"MaxValue": 127.0,
"MinValue": -128.0,
"Value": 21.0,
"WarningAlarmHigh": false,
"WarningHigh": 79.0
},
"/xyz/openbmc_project/sensors/temperature/Core_16_CPU1/chassis": {
"endpoints": [
"/xyz/openbmc_project/inventory/system/board/TiogaPass_Baseboard"
]
},
Regards
-Vijay
From: Gunnar Mills <gmills@linux.vnet.ibm.com>
Date: Monday, January 6, 2020 at 4:40 PM
To: Vijay Khemka <vijaykhemka@fb.com>, "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Subject: Re: webui not working for me
On 1/6/2020 6:29 PM, Vijay Khemka wrote:
It says on page “there are no sensors available”
A curl call to /xyz/openbmc_project/sensors/enumerate returns all the sensors correctly ?
If so, probably will need to add some console.log()s to that function
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L912
[-- Attachment #2: Type: text/html, Size: 8527 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: webui not working for me
2020-01-07 0:45 ` Vijay Khemka
@ 2020-01-09 22:08 ` Pine, Kathryn ElaineX
2020-01-09 22:51 ` Vijay Khemka
0 siblings, 1 reply; 14+ messages in thread
From: Pine, Kathryn ElaineX @ 2020-01-09 22:08 UTC (permalink / raw)
To: Vijay Khemka, Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 2117 bytes --]
Hi,
I’ve uploaded a work in progress patch with the sensors page using Redfish data.
I pulled most of the Intel downstream UI off so it’s a bit plain looking, but should have the functionality needed for using Redfish for sensors:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/28342<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.openbmc-2Dproject.xyz_c_openbmc_phosphor-2Dwebui_-2B_28342&d=DwMFAg&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=JkVnc6xcsrOQFOz3T-1BDffQOJNyNF4wVA5bKw8bIhA&s=tAWerk9BOa0ESN6g41fJ4pT5FsvVhIDygTBrFzQVf8Q&e=>
If there’s value in getting this into upstream, please let me know – would require a bit more coordinating and UI tweaks to get this to match upstream, which is why for now I just uploaded as WIP.
Best,
Kathy
From: openbmc <openbmc-bounces+kathryn.elainex.pine=intel.com@lists.ozlabs.org> On Behalf Of Vijay Khemka
Sent: Monday, January 6, 2020 4:46 PM
To: Gunnar Mills <gmills@linux.vnet.ibm.com>; openbmc@lists.ozlabs.org
Subject: Re: webui not working for me
From: Gunnar Mills <gmills@linux.vnet.ibm.com<mailto:gmills@linux.vnet.ibm.com>>
Date: Monday, January 6, 2020 at 4:40 PM
To: Vijay Khemka <vijaykhemka@fb.com<mailto:vijaykhemka@fb.com>>, "openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>" <openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>>
Subject: Re: webui not working for me
On 1/6/2020 6:29 PM, Vijay Khemka wrote:
It says on page “there are no sensors available”
A curl call to /xyz/openbmc_project/sensors/enumerate returns all the sensors correctly ?
I have not used any curl command here. Please let me know what curl command to use. But intel is using redfish method to get these data.
https://github.com/Intel-BMC/phosphor-webui/blob/e34f46c191a4c993608ac64a867920fb640e8133/app/common/services/api-utils.js#L932
If so, probably will need to add some console.log()s to that function
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L912
[-- Attachment #2: Type: text/html, Size: 8099 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: webui not working for me
2020-01-09 22:08 ` Pine, Kathryn ElaineX
@ 2020-01-09 22:51 ` Vijay Khemka
0 siblings, 0 replies; 14+ messages in thread
From: Vijay Khemka @ 2020-01-09 22:51 UTC (permalink / raw)
To: Pine, Kathryn ElaineX, Gunnar Mills, openbmc
[-- Attachment #1: Type: text/plain, Size: 2697 bytes --]
It does work for me. I don’t find any reason that why it is not a value as it is enabling redfish interface. If it is breaking existing phosphor sensor implementation then we need to fix that but we should definitely support both dbus-sensor as well as phosphor-sensors.
Regards
-Vijay
From: "Pine, Kathryn ElaineX" <kathryn.elainex.pine@intel.com>
Date: Thursday, January 9, 2020 at 2:09 PM
To: Vijay Khemka <vijaykhemka@fb.com>, Gunnar Mills <gmills@linux.vnet.ibm.com>, "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Subject: RE: webui not working for me
Hi,
I’ve uploaded a work in progress patch with the sensors page using Redfish data.
I pulled most of the Intel downstream UI off so it’s a bit plain looking, but should have the functionality needed for using Redfish for sensors:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/28342<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.openbmc-2Dproject.xyz_c_openbmc_phosphor-2Dwebui_-2B_28342&d=DwMFAg&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=JkVnc6xcsrOQFOz3T-1BDffQOJNyNF4wVA5bKw8bIhA&s=tAWerk9BOa0ESN6g41fJ4pT5FsvVhIDygTBrFzQVf8Q&e=>
If there’s value in getting this into upstream, please let me know – would require a bit more coordinating and UI tweaks to get this to match upstream, which is why for now I just uploaded as WIP.
Best,
Kathy
From: openbmc <openbmc-bounces+kathryn.elainex.pine=intel.com@lists.ozlabs.org> On Behalf Of Vijay Khemka
Sent: Monday, January 6, 2020 4:46 PM
To: Gunnar Mills <gmills@linux.vnet.ibm.com>; openbmc@lists.ozlabs.org
Subject: Re: webui not working for me
From: Gunnar Mills <gmills@linux.vnet.ibm.com<mailto:gmills@linux.vnet.ibm.com>>
Date: Monday, January 6, 2020 at 4:40 PM
To: Vijay Khemka <vijaykhemka@fb.com<mailto:vijaykhemka@fb.com>>, "openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>" <openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>>
Subject: Re: webui not working for me
On 1/6/2020 6:29 PM, Vijay Khemka wrote:
It says on page “there are no sensors available”
A curl call to /xyz/openbmc_project/sensors/enumerate returns all the sensors correctly ?
I have not used any curl command here. Please let me know what curl command to use. But intel is using redfish method to get these data.
https://github.com/Intel-BMC/phosphor-webui/blob/e34f46c191a4c993608ac64a867920fb640e8133/app/common/services/api-utils.js#L932
If so, probably will need to add some console.log()s to that function
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L912
[-- Attachment #2: Type: text/html, Size: 9313 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: webui not working for me
@ 2020-10-27 18:08 Giles, Joshua
0 siblings, 0 replies; 14+ messages in thread
From: Giles, Joshua @ 2020-10-27 18:08 UTC (permalink / raw)
To: openbmc; +Cc: kathryn.elainex.pine
Hello Kathryn,
The gerrit link you had below is returning a 404; Can you point me to a location where I can see this patch?
-Josh
From: openbmc <openbmc-bounces+kathryn.elainex.pine=intel.com at lists.ozlabs.org> On Behalf Of Vijay Khemka
Sent: Monday, January 6, 2020 4:46 PM
To: Gunnar Mills <gmills at linux.vnet.ibm.com>; openbmc at lists.ozlabs.org
Subject: Re: webui not working for me
Hi,
I’ve uploaded a work in progress patch with the sensors page using Redfish data.
I pulled most of the Intel downstream UI off so it’s a bit plain looking, but should have the functionality needed for using Redfish for sensors:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/28342<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.openbmc-2Dproject.xyz_c_openbmc_phosphor-2Dwebui_-2B_28342&d=DwMFAg&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=JkVnc6xcsrOQFOz3T-1BDffQOJNyNF4wVA5bKw8bIhA&s=tAWerk9BOa0ESN6g41fJ4pT5FsvVhIDygTBrFzQVf8Q&e=>
If there’s value in getting this into upstream, please let me know – would require a bit more coordinating and UI tweaks to get this to match upstream, which is why for now I just uploaded as WIP.
Best,
Kathy
From: openbmc <openbmc-bounces+kathryn.elainex.pine=intel.com at lists.ozlabs.org> On Behalf Of Vijay Khemka
Sent: Monday, January 6, 2020 4:46 PM
To: Gunnar Mills <gmills at linux.vnet.ibm.com>; openbmc at lists.ozlabs.org
Subject: Re: webui not working for me
From: Gunnar Mills <gmills at linux.vnet.ibm.com<mailto:gmills at linux.vnet.ibm.com>>
Date: Monday, January 6, 2020 at 4:40 PM
To: Vijay Khemka <vijaykhemka at fb.com<mailto:vijaykhemka at fb.com>>, "openbmc at lists.ozlabs.org<mailto:openbmc at lists.ozlabs.org>" <openbmc at lists.ozlabs.org<mailto:openbmc at lists.ozlabs.org>>
Subject: Re: webui not working for me
On 1/6/2020 6:29 PM, Vijay Khemka wrote:
It says on page “there are no sensors available”
A curl call to /xyz/openbmc_project/sensors/enumerate returns all the sensors correctly ?
I have not used any curl command here. Please let me know what curl command to use. But intel is using redfish method to get these data.
https://github.com/Intel-BMC/phosphor-webui/blob/e34f46c191a4c993608ac64a867920fb640e8133/app/common/services/api-utils.js#L932
If so, probably will need to add some console.log()s to that function
https://github.com/openbmc/phosphor-webui/blob/f70f42553615972163b36c9b4d77be07e4399122/app/common/services/api-utils.js#L912
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200109/e883ab7b/attachment.htm>
Previous message (by thread): webui not working for me
Next message (by thread): webui not working for me
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the openbmc mailing list
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-10-28 1:38 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-04 1:38 webui not working for me Vijay Khemka
2020-01-06 5:38 ` Gunnar Mills
2020-01-06 18:31 ` Vijay Khemka
2020-01-06 19:27 ` Vijay Khemka
2020-01-06 23:53 ` Gunnar Mills
2020-01-07 0:19 ` Vijay Khemka
2020-01-07 0:24 ` Gunnar Mills
2020-01-07 0:29 ` Vijay Khemka
2020-01-07 0:39 ` Gunnar Mills
2020-01-07 0:45 ` Vijay Khemka
2020-01-09 22:08 ` Pine, Kathryn ElaineX
2020-01-09 22:51 ` Vijay Khemka
2020-01-07 1:13 ` Vijay Khemka
2020-10-27 18:08 Giles, Joshua
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.