* [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
@ 2019-02-09 14:01 Fabio Estevam
2019-02-13 18:17 ` Bryan O'Donoghue
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Fabio Estevam @ 2019-02-09 14:01 UTC (permalink / raw)
To: u-boot
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Fix all occurrances
board/warp7/README | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/warp7/README b/board/warp7/README
index 60339da543..579bb2de38 100644
--- a/board/warp7/README
+++ b/board/warp7/README
@@ -17,7 +17,7 @@ $ make mrproper
$ make warp7_config
$ make
-This will generate the U-Boot binary called u-boot.imx.
+This will generate the U-Boot binary called u-boot-dtb.imx.
Put warp7 board in USB download mode:
@@ -28,11 +28,11 @@ Connect a USB to serial adapter between the host PC and warp7
Connect a USB cable between the OTG warp7 port and the host PC
-Copy u-boot.imx to the imx_usb_loader folder.
+Copy u-boot-dtb.imx to the imx_usb_loader folder.
-Load u-boot.imx via USB:
+Load u-boot-dtb.imx via USB:
-$ sudo ./imx_usb u-boot.imx
+$ sudo ./imx_usb u-boot-dtb.imx
Then U-Boot should start and its messages will appear in the console program.
@@ -46,9 +46,9 @@ Use the default environment variables:
Run the DFU command:
=> dfu 0 mmc 0
-Transfer u-boot.imx that will be flashed into the eMMC:
+Transfer u-boot-dtb.imx that will be flashed into the eMMC:
-$ sudo dfu-util -D u-boot.imx -a boot
+$ sudo dfu-util -D u-boot-dtb.imx -a boot
Then on the U-Boot prompt the following message should be seen after a
successful upgrade:
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
2019-02-09 14:01 [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion Fabio Estevam
@ 2019-02-13 18:17 ` Bryan O'Donoghue
2019-02-13 18:20 ` Bryan O'Donoghue
2019-02-14 13:43 ` Joris Offouga
2 siblings, 0 replies; 5+ messages in thread
From: Bryan O'Donoghue @ 2019-02-13 18:17 UTC (permalink / raw)
To: u-boot
On 09/02/2019 14:01, Fabio Estevam wrote:
> After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
> so fix the README file accordingly.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
2019-02-09 14:01 [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion Fabio Estevam
2019-02-13 18:17 ` Bryan O'Donoghue
@ 2019-02-13 18:20 ` Bryan O'Donoghue
2019-02-14 13:43 ` Joris Offouga
2 siblings, 0 replies; 5+ messages in thread
From: Bryan O'Donoghue @ 2019-02-13 18:20 UTC (permalink / raw)
To: u-boot
On 09/02/2019 14:01, Fabio Estevam wrote:
> After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
> so fix the README file accordingly.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
oops send RB from wrong address - one more time
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
2019-02-09 14:01 [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion Fabio Estevam
2019-02-13 18:17 ` Bryan O'Donoghue
2019-02-13 18:20 ` Bryan O'Donoghue
@ 2019-02-14 13:43 ` Joris Offouga
2019-02-14 15:39 ` Fabio Estevam
2 siblings, 1 reply; 5+ messages in thread
From: Joris Offouga @ 2019-02-14 13:43 UTC (permalink / raw)
To: u-boot
Le 09/02/2019 à 15:01, Fabio Estevam a écrit :
> After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
> so fix the README file accordingly.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v1:
> - Fix all occurrances
>
> board/warp7/README | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/board/warp7/README b/board/warp7/README
> index 60339da543..579bb2de38 100644
> --- a/board/warp7/README
> +++ b/board/warp7/README
> @@ -17,7 +17,7 @@ $ make mrproper
> $ make warp7_config
Hi Fabio
Fix typo warp7_config into warp7_defconig
> $ make
>
> -This will generate the U-Boot binary called u-boot.imx.
> +This will generate the U-Boot binary called u-boot-dtb.imx.
>
> Put warp7 board in USB download mode:
>
> @@ -28,11 +28,11 @@ Connect a USB to serial adapter between the host PC and warp7
>
> Connect a USB cable between the OTG warp7 port and the host PC
>
> -Copy u-boot.imx to the imx_usb_loader folder.
> +Copy u-boot-dtb.imx to the imx_usb_loader folder.
>
> -Load u-boot.imx via USB:
> +Load u-boot-dtb.imx via USB:
>
> -$ sudo ./imx_usb u-boot.imx
> +$ sudo ./imx_usb u-boot-dtb.imx
>
> Then U-Boot should start and its messages will appear in the console program.
>
> @@ -46,9 +46,9 @@ Use the default environment variables:
> Run the DFU command:
> => dfu 0 mmc 0
>
> -Transfer u-boot.imx that will be flashed into the eMMC:
> +Transfer u-boot-dtb.imx that will be flashed into the eMMC:
>
> -$ sudo dfu-util -D u-boot.imx -a boot
> +$ sudo dfu-util -D u-boot-dtb.imx -a boot
>
> Then on the U-Boot prompt the following message should be seen after a
> successful upgrade:
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
2019-02-14 13:43 ` Joris Offouga
@ 2019-02-14 15:39 ` Fabio Estevam
0 siblings, 0 replies; 5+ messages in thread
From: Fabio Estevam @ 2019-02-14 15:39 UTC (permalink / raw)
To: u-boot
Hi Joris,
On Thu, Feb 14, 2019 at 11:43 AM Joris Offouga <offougajoris@gmail.com> wrote:
> Hi Fabio
>
> Fix typo warp7_config into warp7_defconig
make warp7_config
make
Also works fine.
I agree with you that "make warp_defconfig" is preferable and I will
make such change after this one gets applied.
Thanks for your suggestion!
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-02-14 15:39 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-09 14:01 [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion Fabio Estevam
2019-02-13 18:17 ` Bryan O'Donoghue
2019-02-13 18:20 ` Bryan O'Donoghue
2019-02-14 13:43 ` Joris Offouga
2019-02-14 15:39 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.