All of lore.kernel.org
 help / color / mirror / Atom feed
From: Forza <forza@tnonline.net>
To: Btrfs BTRFS <linux-btrfs@vger.kernel.org>
Subject: Re: cannot use btrfs for nfs server
Date: Mon, 19 Jul 2021 15:07:42 +0200	[thread overview]
Message-ID: <e3a24fc4-0aef-6977-248a-e967dad9954d@tnonline.net> (raw)
In-Reply-To: <2b53b9dd-4353-a73e-59b3-c87b6419ebf4@tnonline.net>



On 2021-07-19 14:06, Forza wrote:
> 
> 
> On 2021-07-13 09:37, Ulli Horlacher wrote:
>> On Mon 2021-07-12 (23:56), g.btrfs@cobb.uk.net wrote:
>>
>>>> root@tsmsrvj:/etc# du -Hs /nfs/localhost/snapshots
>>>> du: WARNING: Circular directory structure.
>>>> This almost certainly means that you have a corrupted file system.
>>>> NOTIFY YOUR SYSTEM MANAGER.
>>>> The following directory is part of the cycle:
>>>>    /nfs/localhost/snapshots/spool
>>>
>>> Sure. But it makes the useful operations work. du, find, ls -R, etc all
>>> work properly on /nfs/localhost/fex.
>>
>> Properly on /nfs/localhost/fex : yes
>> Properly on /nfs/localhost/snapshots : NO
>>
>> And the error messages are annoying!
>>
>> root@tsmsrvj:/etc# exportfs -v
>> /data/fex       
>> localhost.localdomain(rw,async,wdelay,crossmnt,no_root_squash,no_subtree_check,sec=sys,rw,secure,no_root_squash,no_all_squash) 
>>
>> /data/snapshots 
>> localhost.localdomain(rw,async,wdelay,crossmnt,no_root_squash,no_subtree_check,sec=sys,rw,secure,no_root_squash,no_all_squash) 
>>
>>
>> root@tsmsrvj:/etc# mount -o vers=3 localhost:/data/fex /nfs/localhost/fex
>> root@tsmsrvj:/etc# mount -o vers=3 localhost:/data/snapshots 
>> /nfs/localhost/snapshots
>> root@tsmsrvj:/etc# mount | grep localhost
>> localhost:/data/fex on /nfs/localhost/fex type nfs 
>> (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=127.0.0.1,mountvers=3,mountport=37961,mountproto=udp,local_lock=none,addr=127.0.0.1) 
>>
>> localhost:/data/snapshots on /nfs/localhost/snapshots type nfs 
>> (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=127.0.0.1,mountvers=3,mountport=37961,mountproto=udp,local_lock=none,addr=127.0.0.1) 
>>
>>
> 
> What kind of NFS server is this? Isn't UDP mounts legacy and not 
> normally used by default?
> 
> Can you switch to an nfs4 server and try again? I also still think you 
> should use fsid export option.
> 
> 
> 
I'm replying to myself here because I booted up a VM with Fedora 34 and 
tested a similar setup as Mr Horlacher's and can reproduce the errors.

Setup:
1) create a subvolume /mnt/rootvol/nfs
2) create some snapshots:
btrfs sub snap /mnt/rootvol/nfs /mnt/rootvol/nfs/.snapshots/nfs-1
btrfs sub snap /mnt/rootvol/nfs /mnt/rootvol/nfs/.snapshots/nfs-2

3) export as:
/mnt/rootvol/nfs/ *(fsid=1234,no_root_squash)

4) mount -o vers=4 localhost:/mnt/rootvol/nfs /media/nfs-mnt/
5) "du -sh /media/nfs-mnt" fails with
"WARNING: Circular directory structure."

6) "ls -alR /mnt/nfs-mnt" fails with
"not listing already-listed directory"

In addition I have tried with various export options such as crossmnt, 
nohide and subtree_check. They do not improve the situation.

Also the behaviour is the same with nfs3 as with nfs4.

Full outputs are available at https://paste.ee/p/pkHLh

  reply	other threads:[~2021-07-19 13:07 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-13  3:53 any idea about auto export multiple btrfs snapshots? Wang Yugui
2021-03-10  7:46 ` nfs subvolume access? Ulli Horlacher
2021-03-10  7:59   ` Hugo Mills
2021-03-10  8:09     ` Ulli Horlacher
2021-03-10  9:35       ` Graham Cobb
2021-03-10 15:55         ` Ulli Horlacher
2021-03-10 17:29           ` Forza
2021-03-10 17:46             ` Ulli Horlacher
2021-03-10  8:17   ` Ulli Horlacher
2021-03-11  7:46   ` Ulli Horlacher
2021-07-08 22:17     ` cannot use btrfs for nfs server Ulli Horlacher
2021-07-09  0:05       ` Graham Cobb
2021-07-09  4:05         ` NeilBrown
2021-07-09  6:53         ` Ulli Horlacher
2021-07-09  7:23           ` Forza
2021-07-09  7:24             ` Hugo Mills
2021-07-09  7:34             ` Ulli Horlacher
2021-07-09 16:30               ` Chris Murphy
2021-07-10  6:35                 ` Ulli Horlacher
2021-07-11 11:41                   ` Forza
2021-07-12  7:17                     ` Ulli Horlacher
2021-07-09 16:35           ` Chris Murphy
2021-07-10  6:56             ` Ulli Horlacher
2021-07-10 22:17               ` Chris Murphy
2021-07-12  7:25                 ` Ulli Horlacher
2021-07-12 13:06                   ` Graham Cobb
2021-07-12 16:16                     ` Ulli Horlacher
2021-07-12 22:56                       ` g.btrfs
2021-07-13  7:37                         ` Ulli Horlacher
2021-07-19 12:06                           ` Forza
2021-07-19 13:07                             ` Forza [this message]
2021-07-19 13:35                               ` Forza
2021-07-27 11:27                             ` Ulli Horlacher
2021-07-09 16:06       ` Lord Vader
2021-07-10  7:03         ` Ulli Horlacher
     [not found]   ` <162632387205.13764.6196748476850020429@noble.neil.brown.name>
2021-07-15 14:09     ` [PATCH/RFC] NFSD: handle BTRFS subvolumes better Josef Bacik
2021-07-15 16:45       ` Christoph Hellwig
2021-07-15 17:11         ` Josef Bacik
2021-07-15 17:24           ` Christoph Hellwig
2021-07-15 18:01             ` Josef Bacik
2021-07-15 22:37               ` NeilBrown
2021-07-19 15:40                 ` Josef Bacik
2021-07-19 20:00                   ` J. Bruce Fields
2021-07-19 20:44                     ` Josef Bacik
2021-07-19 23:53                       ` NeilBrown
2021-07-19 15:49                 ` J. Bruce Fields
2021-07-20  0:02                   ` NeilBrown
2021-07-19  9:16               ` Christoph Hellwig
2021-07-19 23:54                 ` NeilBrown
2021-07-20  6:23                   ` Christoph Hellwig
2021-07-20  7:17                     ` NeilBrown
2021-07-20  8:00                       ` Christoph Hellwig
2021-07-20 23:11                         ` NeilBrown
2021-07-20 22:10               ` J. Bruce Fields
2021-07-15 23:02       ` NeilBrown
2021-07-15 15:45     ` J. Bruce Fields
2021-07-15 23:08       ` NeilBrown
2021-06-14 22:50 ` any idea about auto export multiple btrfs snapshots? NeilBrown
2021-06-15 15:13   ` Wang Yugui
2021-06-15 15:41     ` Wang Yugui
2021-06-16  5:47     ` Wang Yugui
2021-06-17  3:02     ` NeilBrown
2021-06-17  4:28       ` Wang Yugui
2021-06-18  0:32         ` NeilBrown
2021-06-18  7:26           ` Wang Yugui
2021-06-18 13:34             ` Wang Yugui
2021-06-19  6:47               ` Wang Yugui
2021-06-20 12:27             ` Wang Yugui
2021-06-21  4:52             ` NeilBrown
2021-06-21  5:13               ` NeilBrown
2021-06-21  8:34                 ` Wang Yugui
2021-06-22  1:28                   ` NeilBrown
2021-06-22  3:22                     ` Wang Yugui
2021-06-22  7:14                       ` Wang Yugui
2021-06-23  0:59                         ` NeilBrown
2021-06-23  6:14                           ` Wang Yugui
2021-06-23  6:29                             ` NeilBrown
2021-06-23  9:34                               ` Wang Yugui
2021-06-23 23:38                                 ` NeilBrown
2021-06-23 15:35                           ` J. Bruce Fields
2021-06-23 22:04                             ` NeilBrown
2021-06-23 22:25                               ` J. Bruce Fields
2021-06-23 23:29                                 ` NeilBrown
2021-06-23 23:41                                   ` Frank Filz
2021-06-24  0:01                                   ` J. Bruce Fields
2021-06-24 21:58                               ` Patrick Goetz
2021-06-24 23:27                                 ` NeilBrown
2021-06-21 14:35               ` Frank Filz
2021-06-21 14:55                 ` Wang Yugui
2021-06-21 17:49                   ` Frank Filz
2021-06-21 22:41                     ` Wang Yugui
2021-06-22 17:34                       ` Frank Filz
2021-06-22 22:48                         ` Wang Yugui
2021-06-17  2:15   ` Wang Yugui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e3a24fc4-0aef-6977-248a-e967dad9954d@tnonline.net \
    --to=forza@tnonline.net \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.