* 6lowpan netlink
@ 2022-06-13 3:44 Alexander Aring
2022-06-16 7:57 ` Stefan Schmidt
0 siblings, 1 reply; 5+ messages in thread
From: Alexander Aring @ 2022-06-13 3:44 UTC (permalink / raw)
To: linux-wpan - ML; +Cc: linux-bluetooth, Network Development, Stefan Schmidt
Hi all,
I want to spread around that I started to work on some overdue
implementation, a netlink 6lowpan configuration interface, because
rtnetlink is not enough... it's for configuring very specific 6lowpan
device settings.
Thanks.
- Alex
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 6lowpan netlink
2022-06-13 3:44 6lowpan netlink Alexander Aring
@ 2022-06-16 7:57 ` Stefan Schmidt
2022-06-16 13:00 ` Alexander Aring
0 siblings, 1 reply; 5+ messages in thread
From: Stefan Schmidt @ 2022-06-16 7:57 UTC (permalink / raw)
To: Alexander Aring, linux-wpan - ML; +Cc: linux-bluetooth, Network Development
Hello Alex.
On 13.06.22 05:44, Alexander Aring wrote:
> Hi all,
>
> I want to spread around that I started to work on some overdue
> implementation, a netlink 6lowpan configuration interface, because
> rtnetlink is not enough... it's for configuring very specific 6lowpan
> device settings.
Great, looking forward to it!
regards
Stefan Schmidt
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 6lowpan netlink
2022-06-16 7:57 ` Stefan Schmidt
@ 2022-06-16 13:00 ` Alexander Aring
2022-06-16 16:34 ` Jakub Kicinski
0 siblings, 1 reply; 5+ messages in thread
From: Alexander Aring @ 2022-06-16 13:00 UTC (permalink / raw)
To: Stefan Schmidt; +Cc: linux-wpan - ML, linux-bluetooth, Network Development
Hi,
On Thu, Jun 16, 2022 at 3:57 AM Stefan Schmidt
<stefan@datenfreihafen.org> wrote:
>
> Hello Alex.
>
> On 13.06.22 05:44, Alexander Aring wrote:
> > Hi all,
> >
> > I want to spread around that I started to work on some overdue
> > implementation, a netlink 6lowpan configuration interface, because
> > rtnetlink is not enough... it's for configuring very specific 6lowpan
> > device settings.
>
> Great, looking forward to it!
I would like to trigger a discussion about rtnetlink or generic. I can
put a nested rtnetlink for some device specific settings but then the
whole iproute2 (as it's currently is) would maintain a specific
6lowpan setting which maybe the user never wants...
I think we should follow this way when there is a strict ipv6 device
specific setting e.g. l2 neighbor information in ipv6 ndisc.
- Alex
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 6lowpan netlink
2022-06-16 13:00 ` Alexander Aring
@ 2022-06-16 16:34 ` Jakub Kicinski
2022-06-27 2:31 ` Alexander Aring
0 siblings, 1 reply; 5+ messages in thread
From: Jakub Kicinski @ 2022-06-16 16:34 UTC (permalink / raw)
To: Alexander Aring
Cc: Stefan Schmidt, linux-wpan - ML, linux-bluetooth, Network Development
On Thu, 16 Jun 2022 09:00:08 -0400 Alexander Aring wrote:
> > > I want to spread around that I started to work on some overdue
> > > implementation, a netlink 6lowpan configuration interface, because
> > > rtnetlink is not enough... it's for configuring very specific 6lowpan
> > > device settings.
> >
> > Great, looking forward to it!
>
> I would like to trigger a discussion about rtnetlink or generic. I can
> put a nested rtnetlink for some device specific settings but then the
> whole iproute2 (as it's currently is) would maintain a specific
> 6lowpan setting which maybe the user never wants...
> I think we should follow this way when there is a strict ipv6 device
> specific setting e.g. l2 neighbor information in ipv6 ndisc.
Unless you'll have to repeat attributes which are already present
in rtnetlink in an obvious way genetlink > rtnetlink.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 6lowpan netlink
2022-06-16 16:34 ` Jakub Kicinski
@ 2022-06-27 2:31 ` Alexander Aring
0 siblings, 0 replies; 5+ messages in thread
From: Alexander Aring @ 2022-06-27 2:31 UTC (permalink / raw)
To: Jakub Kicinski
Cc: Stefan Schmidt, linux-wpan - ML, linux-bluetooth, Network Development
Hi,
On Thu, Jun 16, 2022 at 12:34 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Thu, 16 Jun 2022 09:00:08 -0400 Alexander Aring wrote:
> > > > I want to spread around that I started to work on some overdue
> > > > implementation, a netlink 6lowpan configuration interface, because
> > > > rtnetlink is not enough... it's for configuring very specific 6lowpan
> > > > device settings.
> > >
> > > Great, looking forward to it!
> >
> > I would like to trigger a discussion about rtnetlink or generic. I can
> > put a nested rtnetlink for some device specific settings but then the
> > whole iproute2 (as it's currently is) would maintain a specific
> > 6lowpan setting which maybe the user never wants...
> > I think we should follow this way when there is a strict ipv6 device
> > specific setting e.g. l2 neighbor information in ipv6 ndisc.
>
> Unless you'll have to repeat attributes which are already present
> in rtnetlink in an obvious way genetlink > rtnetlink.
I think this is not the case, I do not implement a new protocol
family... I just need to manipulate some 6lowpan stack settings that
aren't part of the current ipv6 protocol familty rtnetlink operations.
Thanks.
- Alex
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-06-27 2:31 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-13 3:44 6lowpan netlink Alexander Aring
2022-06-16 7:57 ` Stefan Schmidt
2022-06-16 13:00 ` Alexander Aring
2022-06-16 16:34 ` Jakub Kicinski
2022-06-27 2:31 ` Alexander Aring
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.