From: Keerthy <j-keerthy@ti.com>
To: ssantosh@kernel.org, linus.walleij@linaro.org, robh+dt@kernel.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [v4 2/2] ARM: dts: keystone-k2g: Add gpio nodes
Date: Fri, 4 Aug 2017 11:16:30 +0530 [thread overview]
Message-ID: <e510748a-9834-6c0e-0f27-1b0d6e68371c@ti.com> (raw)
In-Reply-To: <1501825539-19110-2-git-send-email-j-keerthy@ti.com>
On Friday 04 August 2017 11:15 AM, Keerthy wrote:
> 66AK2G has 2 instances of gpio. The first one has all the 144 GPIOs
> functional. 9 banks with 16 gpios making a total of 144. The second
> instance has only the GPIO0:GPIO67 functional and rest are marked
> reserved.
Oops. I will send with the $subject fixed please ignore this.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>
> Changes in v4:
>
> * Couple of rephrasing in the commit log.
> * Changed compatible to ti,k2g-gpio.
>
> Changes in v2:
>
> * Split the documentation part into a separate patch.
>
> arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
> index bf4d1fa..4eb1ba8 100644
> --- a/arch/arm/boot/dts/keystone-k2g.dtsi
> +++ b/arch/arm/boot/dts/keystone-k2g.dtsi
> @@ -15,6 +15,7 @@
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/pinctrl/keystone.h>
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> compatible = "ti,k2g","ti,keystone";
> @@ -168,5 +169,46 @@
> #reset-cells = <2>;
> };
> };
> +
> + gpio0: gpio@2603000 {
> + compatible = "ti,k2g-gpio", "ti,keystone-gpio";
> + reg = <0x02603000 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <144>;
> + ti,davinci-gpio-unbanked = <0>;
> + clocks = <&k2g_clks 0x001b 0x0>;
> + clock-names = "gpio";
> + };
> +
> + gpio1: gpio@260a000 {
> + compatible = "ti,k2g-gpio", "ti,keystone-gpio";
> + reg = <0x0260a000 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <68>;
> + ti,davinci-gpio-unbanked = <0>;
> + clocks = <&k2g_clks 0x001c 0x0>;
> + clock-names = "gpio";
> + };
> };
> };
>
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: <ssantosh@kernel.org>, <linus.walleij@linaro.org>, <robh+dt@kernel.org>
Cc: <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [v4 2/2] ARM: dts: keystone-k2g: Add gpio nodes
Date: Fri, 4 Aug 2017 11:16:30 +0530 [thread overview]
Message-ID: <e510748a-9834-6c0e-0f27-1b0d6e68371c@ti.com> (raw)
In-Reply-To: <1501825539-19110-2-git-send-email-j-keerthy@ti.com>
On Friday 04 August 2017 11:15 AM, Keerthy wrote:
> 66AK2G has 2 instances of gpio. The first one has all the 144 GPIOs
> functional. 9 banks with 16 gpios making a total of 144. The second
> instance has only the GPIO0:GPIO67 functional and rest are marked
> reserved.
Oops. I will send with the $subject fixed please ignore this.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>
> Changes in v4:
>
> * Couple of rephrasing in the commit log.
> * Changed compatible to ti,k2g-gpio.
>
> Changes in v2:
>
> * Split the documentation part into a separate patch.
>
> arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
> index bf4d1fa..4eb1ba8 100644
> --- a/arch/arm/boot/dts/keystone-k2g.dtsi
> +++ b/arch/arm/boot/dts/keystone-k2g.dtsi
> @@ -15,6 +15,7 @@
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/pinctrl/keystone.h>
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> compatible = "ti,k2g","ti,keystone";
> @@ -168,5 +169,46 @@
> #reset-cells = <2>;
> };
> };
> +
> + gpio0: gpio@2603000 {
> + compatible = "ti,k2g-gpio", "ti,keystone-gpio";
> + reg = <0x02603000 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <144>;
> + ti,davinci-gpio-unbanked = <0>;
> + clocks = <&k2g_clks 0x001b 0x0>;
> + clock-names = "gpio";
> + };
> +
> + gpio1: gpio@260a000 {
> + compatible = "ti,k2g-gpio", "ti,keystone-gpio";
> + reg = <0x0260a000 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <68>;
> + ti,davinci-gpio-unbanked = <0>;
> + clocks = <&k2g_clks 0x001c 0x0>;
> + clock-names = "gpio";
> + };
> };
> };
>
WARNING: multiple messages have this Message-ID (diff)
From: j-keerthy@ti.com (Keerthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [v4 2/2] ARM: dts: keystone-k2g: Add gpio nodes
Date: Fri, 4 Aug 2017 11:16:30 +0530 [thread overview]
Message-ID: <e510748a-9834-6c0e-0f27-1b0d6e68371c@ti.com> (raw)
In-Reply-To: <1501825539-19110-2-git-send-email-j-keerthy@ti.com>
On Friday 04 August 2017 11:15 AM, Keerthy wrote:
> 66AK2G has 2 instances of gpio. The first one has all the 144 GPIOs
> functional. 9 banks with 16 gpios making a total of 144. The second
> instance has only the GPIO0:GPIO67 functional and rest are marked
> reserved.
Oops. I will send with the $subject fixed please ignore this.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>
> Changes in v4:
>
> * Couple of rephrasing in the commit log.
> * Changed compatible to ti,k2g-gpio.
>
> Changes in v2:
>
> * Split the documentation part into a separate patch.
>
> arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
> index bf4d1fa..4eb1ba8 100644
> --- a/arch/arm/boot/dts/keystone-k2g.dtsi
> +++ b/arch/arm/boot/dts/keystone-k2g.dtsi
> @@ -15,6 +15,7 @@
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/pinctrl/keystone.h>
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> compatible = "ti,k2g","ti,keystone";
> @@ -168,5 +169,46 @@
> #reset-cells = <2>;
> };
> };
> +
> + gpio0: gpio at 2603000 {
> + compatible = "ti,k2g-gpio", "ti,keystone-gpio";
> + reg = <0x02603000 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <144>;
> + ti,davinci-gpio-unbanked = <0>;
> + clocks = <&k2g_clks 0x001b 0x0>;
> + clock-names = "gpio";
> + };
> +
> + gpio1: gpio at 260a000 {
> + compatible = "ti,k2g-gpio", "ti,keystone-gpio";
> + reg = <0x0260a000 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <68>;
> + ti,davinci-gpio-unbanked = <0>;
> + clocks = <&k2g_clks 0x001c 0x0>;
> + clock-names = "gpio";
> + };
> };
> };
>
next prev parent reply other threads:[~2017-08-04 5:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-04 5:45 [v4 1/2] dt-bindings: gpio: davinci: Add keystone-k2g compatible Keerthy
2017-08-04 5:45 ` Keerthy
2017-08-04 5:45 ` Keerthy
2017-08-04 5:45 ` [v4 2/2] ARM: dts: keystone-k2g: Add gpio nodes Keerthy
2017-08-04 5:45 ` Keerthy
2017-08-04 5:45 ` Keerthy
2017-08-04 5:46 ` Keerthy [this message]
2017-08-04 5:46 ` Keerthy
2017-08-04 5:46 ` Keerthy
2017-08-04 5:46 ` Keerthy
2017-08-04 5:46 ` Keerthy
2017-08-04 5:46 ` Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e510748a-9834-6c0e-0f27-1b0d6e68371c@ti.com \
--to=j-keerthy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.