* [PATCH] drm/msm/dsi: use bulk clk API
@ 2021-10-02 1:27 Dmitry Baryshkov
2021-10-04 15:03 ` Bjorn Andersson
2021-10-21 22:08 ` [Freedreno] " abhinavk
0 siblings, 2 replies; 3+ messages in thread
From: Dmitry Baryshkov @ 2021-10-02 1:27 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar
Cc: Jonathan Marek, Stephen Boyd, David Airlie, Daniel Vetter,
linux-arm-msm, dri-devel, freedreno
Use clk_bulk_* API instead of hand-coding them. Note, this drops support
for legacy clk naming (e.g. "iface_clk" instead of just "iface"),
however all in-kernel device trees were converted long long ago. The
warning is present there since 2017.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 59 ++++++------------------------
1 file changed, 12 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index e269df285136..3b81f40bba2e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -106,7 +106,8 @@ struct msm_dsi_host {
phys_addr_t ctrl_size;
struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
- struct clk *bus_clks[DSI_BUS_CLK_MAX];
+ int num_bus_clks;
+ struct clk_bulk_data bus_clks[DSI_BUS_CLK_MAX];
struct clk *byte_clk;
struct clk *esc_clk;
@@ -374,15 +375,14 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
int i, ret = 0;
/* get bus clocks */
- for (i = 0; i < cfg->num_bus_clks; i++) {
- msm_host->bus_clks[i] = msm_clk_get(pdev,
- cfg->bus_clk_names[i]);
- if (IS_ERR(msm_host->bus_clks[i])) {
- ret = PTR_ERR(msm_host->bus_clks[i]);
- pr_err("%s: Unable to get %s clock, ret = %d\n",
- __func__, cfg->bus_clk_names[i], ret);
- goto exit;
- }
+ for (i = 0; i < cfg->num_bus_clks; i++)
+ msm_host->bus_clks[i].id = cfg->bus_clk_names[i];
+ msm_host->num_bus_clks = cfg->num_bus_clks;
+
+ ret = devm_clk_bulk_get(&pdev->dev, msm_host->num_bus_clks, msm_host->bus_clks);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to get clocks, ret = %d\n", ret);
+ goto exit;
}
/* get link and source clocks */
@@ -433,41 +433,6 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
return ret;
}
-static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)
-{
- const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
- int i, ret;
-
- DBG("id=%d", msm_host->id);
-
- for (i = 0; i < cfg->num_bus_clks; i++) {
- ret = clk_prepare_enable(msm_host->bus_clks[i]);
- if (ret) {
- pr_err("%s: failed to enable bus clock %d ret %d\n",
- __func__, i, ret);
- goto err;
- }
- }
-
- return 0;
-err:
- for (; i > 0; i--)
- clk_disable_unprepare(msm_host->bus_clks[i]);
-
- return ret;
-}
-
-static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
-{
- const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
- int i;
-
- DBG("");
-
- for (i = cfg->num_bus_clks - 1; i >= 0; i--)
- clk_disable_unprepare(msm_host->bus_clks[i]);
-}
-
int msm_dsi_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -478,7 +443,7 @@ int msm_dsi_runtime_suspend(struct device *dev)
if (!msm_host->cfg_hnd)
return 0;
- dsi_bus_clk_disable(msm_host);
+ clk_bulk_disable_unprepare(msm_host->num_bus_clks, msm_host->bus_clks);
return 0;
}
@@ -493,7 +458,7 @@ int msm_dsi_runtime_resume(struct device *dev)
if (!msm_host->cfg_hnd)
return 0;
- return dsi_bus_clk_enable(msm_host);
+ return clk_bulk_prepare_enable(msm_host->num_bus_clks, msm_host->bus_clks);
}
int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
--
2.33.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] drm/msm/dsi: use bulk clk API
2021-10-02 1:27 [PATCH] drm/msm/dsi: use bulk clk API Dmitry Baryshkov
@ 2021-10-04 15:03 ` Bjorn Andersson
2021-10-21 22:08 ` [Freedreno] " abhinavk
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2021-10-04 15:03 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Sean Paul, Abhinav Kumar, Jonathan Marek,
Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
dri-devel, freedreno
On Fri 01 Oct 18:27 PDT 2021, Dmitry Baryshkov wrote:
> Use clk_bulk_* API instead of hand-coding them. Note, this drops support
> for legacy clk naming (e.g. "iface_clk" instead of just "iface"),
> however all in-kernel device trees were converted long long ago. The
> warning is present there since 2017.
>
Nice!
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/gpu/drm/msm/dsi/dsi_host.c | 59 ++++++------------------------
> 1 file changed, 12 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index e269df285136..3b81f40bba2e 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -106,7 +106,8 @@ struct msm_dsi_host {
> phys_addr_t ctrl_size;
> struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
>
> - struct clk *bus_clks[DSI_BUS_CLK_MAX];
> + int num_bus_clks;
> + struct clk_bulk_data bus_clks[DSI_BUS_CLK_MAX];
>
> struct clk *byte_clk;
> struct clk *esc_clk;
> @@ -374,15 +375,14 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
> int i, ret = 0;
>
> /* get bus clocks */
> - for (i = 0; i < cfg->num_bus_clks; i++) {
> - msm_host->bus_clks[i] = msm_clk_get(pdev,
> - cfg->bus_clk_names[i]);
> - if (IS_ERR(msm_host->bus_clks[i])) {
> - ret = PTR_ERR(msm_host->bus_clks[i]);
> - pr_err("%s: Unable to get %s clock, ret = %d\n",
> - __func__, cfg->bus_clk_names[i], ret);
> - goto exit;
> - }
> + for (i = 0; i < cfg->num_bus_clks; i++)
> + msm_host->bus_clks[i].id = cfg->bus_clk_names[i];
> + msm_host->num_bus_clks = cfg->num_bus_clks;
> +
> + ret = devm_clk_bulk_get(&pdev->dev, msm_host->num_bus_clks, msm_host->bus_clks);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Unable to get clocks, ret = %d\n", ret);
> + goto exit;
> }
>
> /* get link and source clocks */
> @@ -433,41 +433,6 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
> return ret;
> }
>
> -static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)
> -{
> - const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
> - int i, ret;
> -
> - DBG("id=%d", msm_host->id);
> -
> - for (i = 0; i < cfg->num_bus_clks; i++) {
> - ret = clk_prepare_enable(msm_host->bus_clks[i]);
> - if (ret) {
> - pr_err("%s: failed to enable bus clock %d ret %d\n",
> - __func__, i, ret);
> - goto err;
> - }
> - }
> -
> - return 0;
> -err:
> - for (; i > 0; i--)
> - clk_disable_unprepare(msm_host->bus_clks[i]);
> -
> - return ret;
> -}
> -
> -static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
> -{
> - const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
> - int i;
> -
> - DBG("");
> -
> - for (i = cfg->num_bus_clks - 1; i >= 0; i--)
> - clk_disable_unprepare(msm_host->bus_clks[i]);
> -}
> -
> int msm_dsi_runtime_suspend(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> @@ -478,7 +443,7 @@ int msm_dsi_runtime_suspend(struct device *dev)
> if (!msm_host->cfg_hnd)
> return 0;
>
> - dsi_bus_clk_disable(msm_host);
> + clk_bulk_disable_unprepare(msm_host->num_bus_clks, msm_host->bus_clks);
>
> return 0;
> }
> @@ -493,7 +458,7 @@ int msm_dsi_runtime_resume(struct device *dev)
> if (!msm_host->cfg_hnd)
> return 0;
>
> - return dsi_bus_clk_enable(msm_host);
> + return clk_bulk_prepare_enable(msm_host->num_bus_clks, msm_host->bus_clks);
> }
>
> int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
> --
> 2.33.0
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Freedreno] [PATCH] drm/msm/dsi: use bulk clk API
2021-10-02 1:27 [PATCH] drm/msm/dsi: use bulk clk API Dmitry Baryshkov
2021-10-04 15:03 ` Bjorn Andersson
@ 2021-10-21 22:08 ` abhinavk
1 sibling, 0 replies; 3+ messages in thread
From: abhinavk @ 2021-10-21 22:08 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Bjorn Andersson, Rob Clark, Sean Paul, Jonathan Marek,
Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
dri-devel, freedreno
On 2021-10-01 18:27, Dmitry Baryshkov wrote:
> Use clk_bulk_* API instead of hand-coding them. Note, this drops
> support
> for legacy clk naming (e.g. "iface_clk" instead of just "iface"),
> however all in-kernel device trees were converted long long ago. The
> warning is present there since 2017.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
> ---
> drivers/gpu/drm/msm/dsi/dsi_host.c | 59 ++++++------------------------
> 1 file changed, 12 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
> b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index e269df285136..3b81f40bba2e 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -106,7 +106,8 @@ struct msm_dsi_host {
> phys_addr_t ctrl_size;
> struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
>
> - struct clk *bus_clks[DSI_BUS_CLK_MAX];
> + int num_bus_clks;
> + struct clk_bulk_data bus_clks[DSI_BUS_CLK_MAX];
>
> struct clk *byte_clk;
> struct clk *esc_clk;
> @@ -374,15 +375,14 @@ static int dsi_clk_init(struct msm_dsi_host
> *msm_host)
> int i, ret = 0;
>
> /* get bus clocks */
> - for (i = 0; i < cfg->num_bus_clks; i++) {
> - msm_host->bus_clks[i] = msm_clk_get(pdev,
> - cfg->bus_clk_names[i]);
> - if (IS_ERR(msm_host->bus_clks[i])) {
> - ret = PTR_ERR(msm_host->bus_clks[i]);
> - pr_err("%s: Unable to get %s clock, ret = %d\n",
> - __func__, cfg->bus_clk_names[i], ret);
> - goto exit;
> - }
> + for (i = 0; i < cfg->num_bus_clks; i++)
> + msm_host->bus_clks[i].id = cfg->bus_clk_names[i];
> + msm_host->num_bus_clks = cfg->num_bus_clks;
> +
> + ret = devm_clk_bulk_get(&pdev->dev, msm_host->num_bus_clks,
> msm_host->bus_clks);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Unable to get clocks, ret = %d\n", ret);
> + goto exit;
> }
>
> /* get link and source clocks */
> @@ -433,41 +433,6 @@ static int dsi_clk_init(struct msm_dsi_host
> *msm_host)
> return ret;
> }
>
> -static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)
> -{
> - const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
> - int i, ret;
> -
> - DBG("id=%d", msm_host->id);
> -
> - for (i = 0; i < cfg->num_bus_clks; i++) {
> - ret = clk_prepare_enable(msm_host->bus_clks[i]);
> - if (ret) {
> - pr_err("%s: failed to enable bus clock %d ret %d\n",
> - __func__, i, ret);
> - goto err;
> - }
> - }
> -
> - return 0;
> -err:
> - for (; i > 0; i--)
> - clk_disable_unprepare(msm_host->bus_clks[i]);
> -
> - return ret;
> -}
> -
> -static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
> -{
> - const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
> - int i;
> -
> - DBG("");
> -
> - for (i = cfg->num_bus_clks - 1; i >= 0; i--)
> - clk_disable_unprepare(msm_host->bus_clks[i]);
> -}
> -
> int msm_dsi_runtime_suspend(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> @@ -478,7 +443,7 @@ int msm_dsi_runtime_suspend(struct device *dev)
> if (!msm_host->cfg_hnd)
> return 0;
>
> - dsi_bus_clk_disable(msm_host);
> + clk_bulk_disable_unprepare(msm_host->num_bus_clks,
> msm_host->bus_clks);
>
> return 0;
> }
> @@ -493,7 +458,7 @@ int msm_dsi_runtime_resume(struct device *dev)
> if (!msm_host->cfg_hnd)
> return 0;
>
> - return dsi_bus_clk_enable(msm_host);
> + return clk_bulk_prepare_enable(msm_host->num_bus_clks,
> msm_host->bus_clks);
> }
>
> int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-10-21 22:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-02 1:27 [PATCH] drm/msm/dsi: use bulk clk API Dmitry Baryshkov
2021-10-04 15:03 ` Bjorn Andersson
2021-10-21 22:08 ` [Freedreno] " abhinavk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.