From: Robin Murphy <robin.murphy@arm.com> To: joro@8bytes.org Cc: will@kernel.org, iommu@lists.linux.dev, linux-arm-kernel@lists.infradead.org, baolu.lu@linux.intel.com, suravee.suthikulpanit@amd.com, vasant.hegde@amd.com, mjrosato@linux.ibm.com, gerald.schaefer@linux.ibm.com, schnelle@linux.ibm.com, linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 06/15] iommu/arm-smmu: Clean up bus_set_iommu() Date: Tue, 5 Jul 2022 18:08:29 +0100 [thread overview] Message-ID: <e623f02647fee2a9edf761f1ab7f4a84d09aae2c.1657034828.git.robin.murphy@arm.com> (raw) In-Reply-To: <cover.1657034827.git.robin.murphy@arm.com> Stop calling bus_set_iommu() since it's now unnecessary. With device probes now replayed for every IOMMU instance registration, the whole sorry ordering workaround for legacy DT bindings goes too, hooray! Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> --- v3: No change drivers/iommu/arm/arm-smmu/arm-smmu.c | 84 +-------------------------- 1 file changed, 2 insertions(+), 82 deletions(-) diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c index 2ed3594f384e..83c9f2144541 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c @@ -37,7 +37,6 @@ #include <linux/ratelimit.h> #include <linux/slab.h> -#include <linux/amba/bus.h> #include <linux/fsl/mc.h> #include "arm-smmu.h" @@ -93,8 +92,6 @@ static struct platform_driver arm_smmu_driver; static struct iommu_ops arm_smmu_ops; #ifdef CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS -static int arm_smmu_bus_init(struct iommu_ops *ops); - static struct device_node *dev_get_dev_node(struct device *dev) { if (dev_is_pci(dev)) { @@ -180,20 +177,6 @@ static int arm_smmu_register_legacy_master(struct device *dev, kfree(sids); return err; } - -/* - * With the legacy DT binding in play, we have no guarantees about - * probe order, but then we're also not doing default domains, so we can - * delay setting bus ops until we're sure every possible SMMU is ready, - * and that way ensure that no probe_device() calls get missed. - */ -static int arm_smmu_legacy_bus_init(void) -{ - if (using_legacy_binding) - return arm_smmu_bus_init(&arm_smmu_ops); - return 0; -} -device_initcall_sync(arm_smmu_legacy_bus_init); #else static int arm_smmu_register_legacy_master(struct device *dev, struct arm_smmu_device **smmu) @@ -2025,52 +2008,6 @@ static int arm_smmu_device_dt_probe(struct arm_smmu_device *smmu, return 0; } -static int arm_smmu_bus_init(struct iommu_ops *ops) -{ - int err; - - /* Oh, for a proper bus abstraction */ - if (!iommu_present(&platform_bus_type)) { - err = bus_set_iommu(&platform_bus_type, ops); - if (err) - return err; - } -#ifdef CONFIG_ARM_AMBA - if (!iommu_present(&amba_bustype)) { - err = bus_set_iommu(&amba_bustype, ops); - if (err) - goto err_reset_platform_ops; - } -#endif -#ifdef CONFIG_PCI - if (!iommu_present(&pci_bus_type)) { - err = bus_set_iommu(&pci_bus_type, ops); - if (err) - goto err_reset_amba_ops; - } -#endif -#ifdef CONFIG_FSL_MC_BUS - if (!iommu_present(&fsl_mc_bus_type)) { - err = bus_set_iommu(&fsl_mc_bus_type, ops); - if (err) - goto err_reset_pci_ops; - } -#endif - return 0; - -err_reset_pci_ops: __maybe_unused; -#ifdef CONFIG_PCI - bus_set_iommu(&pci_bus_type, NULL); -#endif -err_reset_amba_ops: __maybe_unused; -#ifdef CONFIG_ARM_AMBA - bus_set_iommu(&amba_bustype, NULL); -#endif -err_reset_platform_ops: __maybe_unused; - bus_set_iommu(&platform_bus_type, NULL); - return err; -} - static int arm_smmu_device_probe(struct platform_device *pdev) { struct resource *res; @@ -2187,7 +2124,8 @@ static int arm_smmu_device_probe(struct platform_device *pdev) err = iommu_device_register(&smmu->iommu, &arm_smmu_ops, dev); if (err) { dev_err(dev, "Failed to register iommu\n"); - goto err_sysfs_remove; + iommu_device_sysfs_remove(&smmu->iommu); + return err; } platform_set_drvdata(pdev, smmu); @@ -2205,24 +2143,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev) pm_runtime_enable(dev); } - /* - * For ACPI and generic DT bindings, an SMMU will be probed before - * any device which might need it, so we want the bus ops in place - * ready to handle default domain setup as soon as any SMMU exists. - */ - if (!using_legacy_binding) { - err = arm_smmu_bus_init(&arm_smmu_ops); - if (err) - goto err_unregister_device; - } - return 0; - -err_unregister_device: - iommu_device_unregister(&smmu->iommu); -err_sysfs_remove: - iommu_device_sysfs_remove(&smmu->iommu); - return err; } static int arm_smmu_device_remove(struct platform_device *pdev) @@ -2235,7 +2156,6 @@ static int arm_smmu_device_remove(struct platform_device *pdev) if (!bitmap_empty(smmu->context_map, ARM_SMMU_MAX_CBS)) dev_notice(&pdev->dev, "disabling translation\n"); - arm_smmu_bus_init(NULL); iommu_device_unregister(&smmu->iommu); iommu_device_sysfs_remove(&smmu->iommu); -- 2.36.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: Robin Murphy <robin.murphy@arm.com> To: joro@8bytes.org Cc: will@kernel.org, iommu@lists.linux.dev, linux-arm-kernel@lists.infradead.org, baolu.lu@linux.intel.com, suravee.suthikulpanit@amd.com, vasant.hegde@amd.com, mjrosato@linux.ibm.com, gerald.schaefer@linux.ibm.com, schnelle@linux.ibm.com, linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 06/15] iommu/arm-smmu: Clean up bus_set_iommu() Date: Tue, 5 Jul 2022 18:08:29 +0100 [thread overview] Message-ID: <e623f02647fee2a9edf761f1ab7f4a84d09aae2c.1657034828.git.robin.murphy@arm.com> (raw) In-Reply-To: <cover.1657034827.git.robin.murphy@arm.com> Stop calling bus_set_iommu() since it's now unnecessary. With device probes now replayed for every IOMMU instance registration, the whole sorry ordering workaround for legacy DT bindings goes too, hooray! Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> --- v3: No change drivers/iommu/arm/arm-smmu/arm-smmu.c | 84 +-------------------------- 1 file changed, 2 insertions(+), 82 deletions(-) diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c index 2ed3594f384e..83c9f2144541 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c @@ -37,7 +37,6 @@ #include <linux/ratelimit.h> #include <linux/slab.h> -#include <linux/amba/bus.h> #include <linux/fsl/mc.h> #include "arm-smmu.h" @@ -93,8 +92,6 @@ static struct platform_driver arm_smmu_driver; static struct iommu_ops arm_smmu_ops; #ifdef CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS -static int arm_smmu_bus_init(struct iommu_ops *ops); - static struct device_node *dev_get_dev_node(struct device *dev) { if (dev_is_pci(dev)) { @@ -180,20 +177,6 @@ static int arm_smmu_register_legacy_master(struct device *dev, kfree(sids); return err; } - -/* - * With the legacy DT binding in play, we have no guarantees about - * probe order, but then we're also not doing default domains, so we can - * delay setting bus ops until we're sure every possible SMMU is ready, - * and that way ensure that no probe_device() calls get missed. - */ -static int arm_smmu_legacy_bus_init(void) -{ - if (using_legacy_binding) - return arm_smmu_bus_init(&arm_smmu_ops); - return 0; -} -device_initcall_sync(arm_smmu_legacy_bus_init); #else static int arm_smmu_register_legacy_master(struct device *dev, struct arm_smmu_device **smmu) @@ -2025,52 +2008,6 @@ static int arm_smmu_device_dt_probe(struct arm_smmu_device *smmu, return 0; } -static int arm_smmu_bus_init(struct iommu_ops *ops) -{ - int err; - - /* Oh, for a proper bus abstraction */ - if (!iommu_present(&platform_bus_type)) { - err = bus_set_iommu(&platform_bus_type, ops); - if (err) - return err; - } -#ifdef CONFIG_ARM_AMBA - if (!iommu_present(&amba_bustype)) { - err = bus_set_iommu(&amba_bustype, ops); - if (err) - goto err_reset_platform_ops; - } -#endif -#ifdef CONFIG_PCI - if (!iommu_present(&pci_bus_type)) { - err = bus_set_iommu(&pci_bus_type, ops); - if (err) - goto err_reset_amba_ops; - } -#endif -#ifdef CONFIG_FSL_MC_BUS - if (!iommu_present(&fsl_mc_bus_type)) { - err = bus_set_iommu(&fsl_mc_bus_type, ops); - if (err) - goto err_reset_pci_ops; - } -#endif - return 0; - -err_reset_pci_ops: __maybe_unused; -#ifdef CONFIG_PCI - bus_set_iommu(&pci_bus_type, NULL); -#endif -err_reset_amba_ops: __maybe_unused; -#ifdef CONFIG_ARM_AMBA - bus_set_iommu(&amba_bustype, NULL); -#endif -err_reset_platform_ops: __maybe_unused; - bus_set_iommu(&platform_bus_type, NULL); - return err; -} - static int arm_smmu_device_probe(struct platform_device *pdev) { struct resource *res; @@ -2187,7 +2124,8 @@ static int arm_smmu_device_probe(struct platform_device *pdev) err = iommu_device_register(&smmu->iommu, &arm_smmu_ops, dev); if (err) { dev_err(dev, "Failed to register iommu\n"); - goto err_sysfs_remove; + iommu_device_sysfs_remove(&smmu->iommu); + return err; } platform_set_drvdata(pdev, smmu); @@ -2205,24 +2143,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev) pm_runtime_enable(dev); } - /* - * For ACPI and generic DT bindings, an SMMU will be probed before - * any device which might need it, so we want the bus ops in place - * ready to handle default domain setup as soon as any SMMU exists. - */ - if (!using_legacy_binding) { - err = arm_smmu_bus_init(&arm_smmu_ops); - if (err) - goto err_unregister_device; - } - return 0; - -err_unregister_device: - iommu_device_unregister(&smmu->iommu); -err_sysfs_remove: - iommu_device_sysfs_remove(&smmu->iommu); - return err; } static int arm_smmu_device_remove(struct platform_device *pdev) @@ -2235,7 +2156,6 @@ static int arm_smmu_device_remove(struct platform_device *pdev) if (!bitmap_empty(smmu->context_map, ARM_SMMU_MAX_CBS)) dev_notice(&pdev->dev, "disabling translation\n"); - arm_smmu_bus_init(NULL); iommu_device_unregister(&smmu->iommu); iommu_device_sysfs_remove(&smmu->iommu); -- 2.36.1.dirty _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-07-05 17:09 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-05 17:08 [PATCH v3 00/15] iommu: Retire bus_set_iommu() Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 01/15] iommu/vt-d: Handle race between registration and device probe Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-06 1:39 ` Baolu Lu 2022-07-06 1:39 ` Baolu Lu 2022-07-07 6:51 ` Tian, Kevin 2022-07-07 6:51 ` Tian, Kevin 2022-07-08 7:52 ` Baolu Lu 2022-07-08 7:52 ` Baolu Lu 2022-07-15 12:37 ` Robin Murphy 2022-07-15 12:37 ` Robin Murphy 2022-07-19 0:06 ` Lu Baolu 2022-07-19 0:06 ` Lu Baolu 2022-07-05 17:08 ` [PATCH v3 02/15] iommu/amd: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 03/15] iommu: Always register bus notifiers Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-06 1:53 ` Baolu Lu 2022-07-06 1:53 ` Baolu Lu 2022-07-06 13:43 ` Robin Murphy 2022-07-06 13:43 ` Robin Murphy 2022-07-07 0:20 ` Baolu Lu 2022-07-07 0:20 ` Baolu Lu 2022-07-07 6:34 ` Tian, Kevin 2022-07-07 6:34 ` Tian, Kevin 2022-07-07 9:38 ` Robin Murphy 2022-07-07 9:38 ` Robin Murphy 2022-07-07 6:31 ` Tian, Kevin 2022-07-07 6:31 ` Tian, Kevin 2022-07-07 9:58 ` Robin Murphy 2022-07-07 9:58 ` Robin Murphy 2022-07-08 5:50 ` Tian, Kevin 2022-07-08 5:50 ` Tian, Kevin 2022-07-05 17:08 ` [PATCH v3 04/15] iommu: Move bus setup to IOMMU device registration Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-06 2:35 ` Baolu Lu 2022-07-06 2:35 ` Baolu Lu 2022-07-06 14:37 ` Robin Murphy 2022-07-06 14:37 ` Robin Murphy 2022-07-07 1:19 ` Baolu Lu 2022-07-07 1:19 ` Baolu Lu 2022-07-07 6:51 ` Tian, Kevin 2022-07-07 6:51 ` Tian, Kevin 2022-07-07 10:58 ` Robin Murphy 2022-07-07 10:58 ` Robin Murphy 2022-07-08 5:52 ` Tian, Kevin 2022-07-08 5:52 ` Tian, Kevin 2022-07-05 17:08 ` [PATCH v3 05/15] iommu/amd: Clean up bus_set_iommu() Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` Robin Murphy [this message] 2022-07-05 17:08 ` [PATCH v3 06/15] iommu/arm-smmu: " Robin Murphy 2022-07-05 17:08 ` [PATCH v3 07/15] iommu/arm-smmu-v3: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 08/15] iommu/dart: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 09/15] iommu/exynos: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 10/15] iommu/ipmmu-vmsa: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 11/15] iommu/mtk: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 12/15] iommu/omap: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 13/15] iommu/tegra-smmu: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 14/15] iommu/virtio: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-05 17:08 ` [PATCH v3 15/15] iommu: " Robin Murphy 2022-07-05 17:08 ` Robin Murphy 2022-07-07 7:45 ` Tian, Kevin 2022-07-07 7:45 ` Tian, Kevin 2022-07-07 12:49 ` Matthew Rosato 2022-07-07 12:49 ` Matthew Rosato 2022-07-07 12:54 ` Matthew Rosato 2022-07-07 12:54 ` Matthew Rosato 2022-07-07 14:58 ` Robin Murphy 2022-07-07 14:58 ` Robin Murphy 2022-07-07 16:42 ` Matthew Rosato 2022-07-07 16:42 ` Matthew Rosato 2022-07-08 8:14 ` [PATCH] iommu/s390: fail probe for non-pci device Niklas Schnelle 2022-07-08 8:14 ` Niklas Schnelle 2022-07-08 8:17 ` [PATCH v3 00/15] iommu: Retire bus_set_iommu() Niklas Schnelle 2022-07-08 8:17 ` Niklas Schnelle 2022-07-15 13:12 ` Robin Murphy 2022-07-15 13:12 ` Robin Murphy 2022-07-21 7:17 ` Tian, Kevin 2022-07-21 7:17 ` Tian, Kevin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=e623f02647fee2a9edf761f1ab7f4a84d09aae2c.1657034828.git.robin.murphy@arm.com \ --to=robin.murphy@arm.com \ --cc=baolu.lu@linux.intel.com \ --cc=gerald.schaefer@linux.ibm.com \ --cc=iommu@lists.linux.dev \ --cc=joro@8bytes.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-s390@vger.kernel.org \ --cc=mjrosato@linux.ibm.com \ --cc=schnelle@linux.ibm.com \ --cc=suravee.suthikulpanit@amd.com \ --cc=vasant.hegde@amd.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.