* [PATCH v5 00/10] arm: dts: extend mt7623 support
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Change since v4:
- split mt6323 nodes as the independent item which tends to integration with
other MediaTek SoCs
- enhanced commit log
- fixed up building warning shown in make dtsb
- added clock-frequency to CPU nodes to avoid warning in boot time
- added more nodes into the SoC-level file mt7623.dtsi such as CPU OPP table
and thermal zone treating CPU as one of cooling devices
- cleaned up the file mt7623n-bananapi-bpi-r2.dts such as listing nodes in
alphabetical order
Changes since v3:
- explain in the commit message why this binding is changed
- patches for dt-binding is reordered at the beginning of patch list
- be concise wigh using SPDX-License-Identifier in new dts file
Changes since v2:
- exclude those patch are already queued into v4.11-next/dts32
- exclude those patches already sent in separation
- add mt7623a SoC basic support
- update binding SoC for mt7623n and relevant boards
Changes since v1:
Continue the upstream journey based on the previous John Crispin's good work.
- add fixes for the v1 suggestion
- fix typo in the commit log
- add missing pinctrl bindings for mt7623
- reuse pinctrl driver for mt7623
- enhance existing nodes since the way for binding is changed e.g USB
- add more nodes which already gets support from the latest tree e.g MT7530 DSA
- add the dts file for Bananapi R2 (BPI-R2) board
John Crispin (4):
arm: dts: mt7623: add mt6323.dtsi file
arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
arm: dts: mt7623: enable the usb device on the mt7623n rfb
arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
Sean Wang (6):
dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC
Platform
arm: dts: mt7623: rename mt7623-evb.dts to
arch/arm/boot/dts/mt7623n-rfb.dtsi
ARM: mediatek: add MT7623a smp bringup code
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
arm: dts: mt7623: add clock-frequency to CPU nodes
Documentation/devicetree/bindings/arm/mediatek.txt | 14 +-
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++
arch/arm/boot/dts/mt7623-evb.dts | 33 --
arch/arm/boot/dts/mt7623.dtsi | 132 +++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 +++++
arch/arm/boot/dts/mt7623n-rfb.dtsi | 92 +++++
arch/arm/mach-mediatek/mediatek.c | 2 +
arch/arm/mach-mediatek/platsmp.c | 1 +
10 files changed, 1021 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/mt6323.dtsi
delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
--
2.7.4
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v5 00/10] arm: dts: extend mt7623 support
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: Sean Wang, linux-kernel, linux-arm-kernel, john
From: Sean Wang <sean.wang@mediatek.com>
Change since v4:
- split mt6323 nodes as the independent item which tends to integration with
other MediaTek SoCs
- enhanced commit log
- fixed up building warning shown in make dtsb
- added clock-frequency to CPU nodes to avoid warning in boot time
- added more nodes into the SoC-level file mt7623.dtsi such as CPU OPP table
and thermal zone treating CPU as one of cooling devices
- cleaned up the file mt7623n-bananapi-bpi-r2.dts such as listing nodes in
alphabetical order
Changes since v3:
- explain in the commit message why this binding is changed
- patches for dt-binding is reordered at the beginning of patch list
- be concise wigh using SPDX-License-Identifier in new dts file
Changes since v2:
- exclude those patch are already queued into v4.11-next/dts32
- exclude those patches already sent in separation
- add mt7623a SoC basic support
- update binding SoC for mt7623n and relevant boards
Changes since v1:
Continue the upstream journey based on the previous John Crispin's good work.
- add fixes for the v1 suggestion
- fix typo in the commit log
- add missing pinctrl bindings for mt7623
- reuse pinctrl driver for mt7623
- enhance existing nodes since the way for binding is changed e.g USB
- add more nodes which already gets support from the latest tree e.g MT7530 DSA
- add the dts file for Bananapi R2 (BPI-R2) board
John Crispin (4):
arm: dts: mt7623: add mt6323.dtsi file
arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
arm: dts: mt7623: enable the usb device on the mt7623n rfb
arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
Sean Wang (6):
dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC
Platform
arm: dts: mt7623: rename mt7623-evb.dts to
arch/arm/boot/dts/mt7623n-rfb.dtsi
ARM: mediatek: add MT7623a smp bringup code
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
arm: dts: mt7623: add clock-frequency to CPU nodes
Documentation/devicetree/bindings/arm/mediatek.txt | 14 +-
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++
arch/arm/boot/dts/mt7623-evb.dts | 33 --
arch/arm/boot/dts/mt7623.dtsi | 132 +++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 +++++
arch/arm/boot/dts/mt7623n-rfb.dtsi | 92 +++++
arch/arm/mach-mediatek/mediatek.c | 2 +
arch/arm/mach-mediatek/platsmp.c | 1 +
10 files changed, 1021 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/mt6323.dtsi
delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
--
2.7.4
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v5 00/10] arm: dts: extend mt7623 support
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Change since v4:
- split mt6323 nodes as the independent item which tends to integration with
other MediaTek SoCs
- enhanced commit log
- fixed up building warning shown in make dtsb
- added clock-frequency to CPU nodes to avoid warning in boot time
- added more nodes into the SoC-level file mt7623.dtsi such as CPU OPP table
and thermal zone treating CPU as one of cooling devices
- cleaned up the file mt7623n-bananapi-bpi-r2.dts such as listing nodes in
alphabetical order
Changes since v3:
- explain in the commit message why this binding is changed
- patches for dt-binding is reordered at the beginning of patch list
- be concise wigh using SPDX-License-Identifier in new dts file
Changes since v2:
- exclude those patch are already queued into v4.11-next/dts32
- exclude those patches already sent in separation
- add mt7623a SoC basic support
- update binding SoC for mt7623n and relevant boards
Changes since v1:
Continue the upstream journey based on the previous John Crispin's good work.
- add fixes for the v1 suggestion
- fix typo in the commit log
- add missing pinctrl bindings for mt7623
- reuse pinctrl driver for mt7623
- enhance existing nodes since the way for binding is changed e.g USB
- add more nodes which already gets support from the latest tree e.g MT7530 DSA
- add the dts file for Bananapi R2 (BPI-R2) board
John Crispin (4):
arm: dts: mt7623: add mt6323.dtsi file
arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
arm: dts: mt7623: enable the usb device on the mt7623n rfb
arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
Sean Wang (6):
dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC
Platform
arm: dts: mt7623: rename mt7623-evb.dts to
arch/arm/boot/dts/mt7623n-rfb.dtsi
ARM: mediatek: add MT7623a smp bringup code
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
arm: dts: mt7623: add clock-frequency to CPU nodes
Documentation/devicetree/bindings/arm/mediatek.txt | 14 +-
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++
arch/arm/boot/dts/mt7623-evb.dts | 33 --
arch/arm/boot/dts/mt7623.dtsi | 132 +++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 +++++
arch/arm/boot/dts/mt7623n-rfb.dtsi | 92 +++++
arch/arm/mach-mediatek/mediatek.c | 2 +
arch/arm/mach-mediatek/platsmp.c | 1 +
10 files changed, 1021 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/mt6323.dtsi
delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
--
2.7.4
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v5 01/10] dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Because there are two versions of MT7623 SoC that is MT7623a and MT7623n
respectively. So update the part of MT7623n bindings to allow that people
tend to differentiate which MT7623 SoC the boards applies.
And "mediatek,mt7623-evb" can be safely changed to
"mediatek,mt7623n-rfb-nand" because mt7623-evb is a kind of debug board
internally in Mediatek which real users can't get. So instead we should
indicate which variants it belongs to with more specific postfix as the
adding here to let people easily know what board they use.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index da7bd13..cab2074 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,7 +1,6 @@
-MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
+MediaTek SoC based Platforms Device Tree Bindings
-Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
-following property:
+Boards with a MediaTek SoC shall have the following property:
Required root node property:
@@ -14,7 +13,7 @@ compatible: Must contain one of
"mediatek,mt6795"
"mediatek,mt6797"
"mediatek,mt7622"
- "mediatek,mt7623"
+ "mediatek,mt7623" which is referred to MT7623N SoC
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
@@ -46,9 +45,9 @@ Supported boards:
- Reference board variant 1 for MT7622:
Required root node properties:
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-- Evaluation board for MT7623:
+- Reference board for MT7623n with NAND:
Required root node properties:
- - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+ - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 01/10] dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Sean Wang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
john-Pj+rj9U5foFAfugRpC6u6w
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Because there are two versions of MT7623 SoC that is MT7623a and MT7623n
respectively. So update the part of MT7623n bindings to allow that people
tend to differentiate which MT7623 SoC the boards applies.
And "mediatek,mt7623-evb" can be safely changed to
"mediatek,mt7623n-rfb-nand" because mt7623-evb is a kind of debug board
internally in Mediatek which real users can't get. So instead we should
indicate which variants it belongs to with more specific postfix as the
adding here to let people easily know what board they use.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index da7bd13..cab2074 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,7 +1,6 @@
-MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
+MediaTek SoC based Platforms Device Tree Bindings
-Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
-following property:
+Boards with a MediaTek SoC shall have the following property:
Required root node property:
@@ -14,7 +13,7 @@ compatible: Must contain one of
"mediatek,mt6795"
"mediatek,mt6797"
"mediatek,mt7622"
- "mediatek,mt7623"
+ "mediatek,mt7623" which is referred to MT7623N SoC
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
@@ -46,9 +45,9 @@ Supported boards:
- Reference board variant 1 for MT7622:
Required root node properties:
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-- Evaluation board for MT7623:
+- Reference board for MT7623n with NAND:
Required root node properties:
- - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+ - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 01/10] dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Because there are two versions of MT7623 SoC that is MT7623a and MT7623n
respectively. So update the part of MT7623n bindings to allow that people
tend to differentiate which MT7623 SoC the boards applies.
And "mediatek,mt7623-evb" can be safely changed to
"mediatek,mt7623n-rfb-nand" because mt7623-evb is a kind of debug board
internally in Mediatek which real users can't get. So instead we should
indicate which variants it belongs to with more specific postfix as the
adding here to let people easily know what board they use.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index da7bd13..cab2074 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,7 +1,6 @@
-MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
+MediaTek SoC based Platforms Device Tree Bindings
-Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
-following property:
+Boards with a MediaTek SoC shall have the following property:
Required root node property:
@@ -14,7 +13,7 @@ compatible: Must contain one of
"mediatek,mt6795"
"mediatek,mt6797"
"mediatek,mt7622"
- "mediatek,mt7623"
+ "mediatek,mt7623" which is referred to MT7623N SoC
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
@@ -46,9 +45,9 @@ Supported boards:
- Reference board variant 1 for MT7622:
Required root node properties:
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-- Evaluation board for MT7623:
+- Reference board for MT7623n with NAND:
Required root node properties:
- - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+ - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 02/10] dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform
2017-07-31 7:36 ` sean.wang
(?)
@ 2017-07-31 7:36 ` sean.wang
-1 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
This adds DT binding documentation for Mediatek MT7623a
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index cab2074..ae011b2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -14,6 +14,7 @@ compatible: Must contain one of
"mediatek,mt6797"
"mediatek,mt7622"
"mediatek,mt7623" which is referred to MT7623N SoC
+ "mediatek,mt7623a"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 02/10] dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
This adds DT binding documentation for Mediatek MT7623a
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index cab2074..ae011b2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -14,6 +14,7 @@ compatible: Must contain one of
"mediatek,mt6797"
"mediatek,mt7622"
"mediatek,mt7623" which is referred to MT7623N SoC
+ "mediatek,mt7623a"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 02/10] dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
This adds DT binding documentation for Mediatek MT7623a
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index cab2074..ae011b2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -14,6 +14,7 @@ compatible: Must contain one of
"mediatek,mt6797"
"mediatek,mt7622"
"mediatek,mt7623" which is referred to MT7623N SoC
+ "mediatek,mt7623a"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: John Crispin <john@phrozen.org>
MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node. For
those boards with the same PMIC, the intermediate mt6323.dtsi could be
reused to save more redundant nodes created on each board device-tree
files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623-evb.dts | 29 +++++
arch/arm/boot/dts/mt7623.dtsi | 8 +-
3 files changed, 274 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/mt6323.dtsi
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
new file mode 100644
index 0000000..7c783d6
--- /dev/null
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -0,0 +1,241 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ * Sean Wang <sean.wang@mediatek.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323regulator: mt6323regulator{
+ compatible = "mediatek,mt6323-regulator";
+
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
index b60b41c..0686ad7 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "mt7623.dtsi"
+#include "mt6323.dtsi"
/ {
model = "MediaTek MT7623 evaluation board";
@@ -23,6 +24,24 @@
stdout-path = &uart2;
};
+ cpus {
+ cpu0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
memory {
reg = <0 0x80000000 0 0x40000000>;
};
@@ -31,3 +50,13 @@
&uart2 {
status = "okay";
};
+
+&mmc0 {
+ vmmc-supply = <&mt6323_vemc3v3_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+ vmmc-supply = <&mt6323_vmch_reg>;
+ vqmmc-supply = <&mt6323_vmc_reg>;
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 016e932..937a550 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -32,22 +32,22 @@
#size-cells = <0>;
enable-method = "mediatek,mt6589-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: john-Pj+rj9U5foFAfugRpC6u6w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node. For
those boards with the same PMIC, the intermediate mt6323.dtsi could be
reused to save more redundant nodes created on each board device-tree
files.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623-evb.dts | 29 +++++
arch/arm/boot/dts/mt7623.dtsi | 8 +-
3 files changed, 274 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/mt6323.dtsi
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
new file mode 100644
index 0000000..7c783d6
--- /dev/null
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -0,0 +1,241 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
+ * Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323regulator: mt6323regulator{
+ compatible = "mediatek,mt6323-regulator";
+
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
index b60b41c..0686ad7 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "mt7623.dtsi"
+#include "mt6323.dtsi"
/ {
model = "MediaTek MT7623 evaluation board";
@@ -23,6 +24,24 @@
stdout-path = &uart2;
};
+ cpus {
+ cpu0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
memory {
reg = <0 0x80000000 0 0x40000000>;
};
@@ -31,3 +50,13 @@
&uart2 {
status = "okay";
};
+
+&mmc0 {
+ vmmc-supply = <&mt6323_vemc3v3_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+ vmmc-supply = <&mt6323_vmch_reg>;
+ vqmmc-supply = <&mt6323_vmc_reg>;
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 016e932..937a550 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -32,22 +32,22 @@
#size-cells = <0>;
enable-method = "mediatek,mt6589-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: John Crispin <john@phrozen.org>
MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node. For
those boards with the same PMIC, the intermediate mt6323.dtsi could be
reused to save more redundant nodes created on each board device-tree
files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623-evb.dts | 29 +++++
arch/arm/boot/dts/mt7623.dtsi | 8 +-
3 files changed, 274 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/mt6323.dtsi
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
new file mode 100644
index 0000000..7c783d6
--- /dev/null
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -0,0 +1,241 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ * Sean Wang <sean.wang@mediatek.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323regulator: mt6323regulator{
+ compatible = "mediatek,mt6323-regulator";
+
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
index b60b41c..0686ad7 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "mt7623.dtsi"
+#include "mt6323.dtsi"
/ {
model = "MediaTek MT7623 evaluation board";
@@ -23,6 +24,24 @@
stdout-path = &uart2;
};
+ cpus {
+ cpu0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
memory {
reg = <0 0x80000000 0 0x40000000>;
};
@@ -31,3 +50,13 @@
&uart2 {
status = "okay";
};
+
+&mmc0 {
+ vmmc-supply = <&mt6323_vemc3v3_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+ vmmc-supply = <&mt6323_vmch_reg>;
+ vqmmc-supply = <&mt6323_vmc_reg>;
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 016e932..937a550 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -32,22 +32,22 @@
#size-cells = <0>;
enable-method = "mediatek,mt6589-smp";
- cpu at 0 {
+ cpu0: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
};
- cpu at 1 {
+ cpu1: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
};
- cpu at 2 {
+ cpu2: cpu at 2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
};
- cpu at 3 {
+ cpu3: cpu at 3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 04/10] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
2017-07-31 7:36 ` sean.wang
(?)
@ 2017-07-31 7:36 ` sean.wang
-1 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
There are 2 versions of the MT7623 SoC, the one is MT7623N and the other
is MT7623A. MT7623N is almost identical to MT7623A but has some
additional multimedia features. The reference boards are available as
NAND or MMC and might have a different ethernet setup. In order to reduce
the duplication of devicetree code we add an intermediate dtsi file for
these reference boards. Additionally MediaTek pointed out, that the EVB
is yet another board and the board in question is infact the RFB. Take
this into account while renaming the files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 21 +++++++++++++++++++++
.../boot/dts/{mt7623-evb.dts => mt7623n-rfb.dtsi} | 8 +++-----
3 files changed, 25 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
rename arch/arm/boot/dts/{mt7623-evb.dts => mt7623n-rfb.dtsi} (87%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35..f3a2442 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1049,7 +1049,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
- mt7623-evb.dtb \
+ mt7623n-rfb-nand.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
new file mode 100644
index 0000000..ba7d1ab
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623n-rfb.dtsi"
+
+/ {
+ model = "MediaTek MT7623N NAND reference board";
+ compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623n-rfb.dtsi
similarity index 87%
rename from arch/arm/boot/dts/mt7623-evb.dts
rename to arch/arm/boot/dts/mt7623n-rfb.dtsi
index 0686ad7..805ba69 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -1,6 +1,7 @@
/*
- * Copyright (c) 2016 MediaTek Inc.
+ * Copyright (c) 2017 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
+ * Sean Wang <sean.wang@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,9 +18,6 @@
#include "mt6323.dtsi"
/ {
- model = "MediaTek MT7623 evaluation board";
- compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
chosen {
stdout-path = &uart2;
};
@@ -42,7 +40,7 @@
};
};
- memory {
+ memory@80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 04/10] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
There are 2 versions of the MT7623 SoC, the one is MT7623N and the other
is MT7623A. MT7623N is almost identical to MT7623A but has some
additional multimedia features. The reference boards are available as
NAND or MMC and might have a different ethernet setup. In order to reduce
the duplication of devicetree code we add an intermediate dtsi file for
these reference boards. Additionally MediaTek pointed out, that the EVB
is yet another board and the board in question is infact the RFB. Take
this into account while renaming the files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 21 +++++++++++++++++++++
.../boot/dts/{mt7623-evb.dts => mt7623n-rfb.dtsi} | 8 +++-----
3 files changed, 25 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
rename arch/arm/boot/dts/{mt7623-evb.dts => mt7623n-rfb.dtsi} (87%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35..f3a2442 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1049,7 +1049,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
- mt7623-evb.dtb \
+ mt7623n-rfb-nand.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
new file mode 100644
index 0000000..ba7d1ab
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623n-rfb.dtsi"
+
+/ {
+ model = "MediaTek MT7623N NAND reference board";
+ compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623n-rfb.dtsi
similarity index 87%
rename from arch/arm/boot/dts/mt7623-evb.dts
rename to arch/arm/boot/dts/mt7623n-rfb.dtsi
index 0686ad7..805ba69 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -1,6 +1,7 @@
/*
- * Copyright (c) 2016 MediaTek Inc.
+ * Copyright (c) 2017 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
+ * Sean Wang <sean.wang@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,9 +18,6 @@
#include "mt6323.dtsi"
/ {
- model = "MediaTek MT7623 evaluation board";
- compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
chosen {
stdout-path = &uart2;
};
@@ -42,7 +40,7 @@
};
};
- memory {
+ memory@80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 04/10] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
There are 2 versions of the MT7623 SoC, the one is MT7623N and the other
is MT7623A. MT7623N is almost identical to MT7623A but has some
additional multimedia features. The reference boards are available as
NAND or MMC and might have a different ethernet setup. In order to reduce
the duplication of devicetree code we add an intermediate dtsi file for
these reference boards. Additionally MediaTek pointed out, that the EVB
is yet another board and the board in question is infact the RFB. Take
this into account while renaming the files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 21 +++++++++++++++++++++
.../boot/dts/{mt7623-evb.dts => mt7623n-rfb.dtsi} | 8 +++-----
3 files changed, 25 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
rename arch/arm/boot/dts/{mt7623-evb.dts => mt7623n-rfb.dtsi} (87%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35..f3a2442 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1049,7 +1049,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
- mt7623-evb.dtb \
+ mt7623n-rfb-nand.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
new file mode 100644
index 0000000..ba7d1ab
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623n-rfb.dtsi"
+
+/ {
+ model = "MediaTek MT7623N NAND reference board";
+ compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623n-rfb.dtsi
similarity index 87%
rename from arch/arm/boot/dts/mt7623-evb.dts
rename to arch/arm/boot/dts/mt7623n-rfb.dtsi
index 0686ad7..805ba69 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -1,6 +1,7 @@
/*
- * Copyright (c) 2016 MediaTek Inc.
+ * Copyright (c) 2017 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
+ * Sean Wang <sean.wang@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,9 +18,6 @@
#include "mt6323.dtsi"
/ {
- model = "MediaTek MT7623 evaluation board";
- compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
chosen {
stdout-path = &uart2;
};
@@ -42,7 +40,7 @@
};
};
- memory {
+ memory at 80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 05/10] ARM: mediatek: add MT7623a smp bringup code
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add support for booting secondary CPUs on MT7623a.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/mach-mediatek/mediatek.c | 2 ++
arch/arm/mach-mediatek/platsmp.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index c3cf215..6910b4e 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -30,6 +30,7 @@ static void __init mediatek_timer_init(void)
if (of_machine_is_compatible("mediatek,mt6589") ||
of_machine_is_compatible("mediatek,mt7623") ||
+ of_machine_is_compatible("mediatek,mt7623a") ||
of_machine_is_compatible("mediatek,mt8135") ||
of_machine_is_compatible("mediatek,mt8127")) {
/* turn on GPT6 which ungates arch timer clocks */
@@ -49,6 +50,7 @@ static const char * const mediatek_board_dt_compat[] = {
"mediatek,mt6589",
"mediatek,mt6592",
"mediatek,mt7623",
+ "mediatek,mt7623a",
"mediatek,mt8127",
"mediatek,mt8135",
NULL,
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 726eb69..27d78c9 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -59,6 +59,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
{ .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
{ .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot },
+ { .compatible = "mediatek,mt7623a", .data = &mtk_mt7623_boot },
};
static void __iomem *mtk_smp_base;
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 05/10] ARM: mediatek: add MT7623a smp bringup code
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Sean Wang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
john-Pj+rj9U5foFAfugRpC6u6w
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add support for booting secondary CPUs on MT7623a.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/mach-mediatek/mediatek.c | 2 ++
arch/arm/mach-mediatek/platsmp.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index c3cf215..6910b4e 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -30,6 +30,7 @@ static void __init mediatek_timer_init(void)
if (of_machine_is_compatible("mediatek,mt6589") ||
of_machine_is_compatible("mediatek,mt7623") ||
+ of_machine_is_compatible("mediatek,mt7623a") ||
of_machine_is_compatible("mediatek,mt8135") ||
of_machine_is_compatible("mediatek,mt8127")) {
/* turn on GPT6 which ungates arch timer clocks */
@@ -49,6 +50,7 @@ static const char * const mediatek_board_dt_compat[] = {
"mediatek,mt6589",
"mediatek,mt6592",
"mediatek,mt7623",
+ "mediatek,mt7623a",
"mediatek,mt8127",
"mediatek,mt8135",
NULL,
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 726eb69..27d78c9 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -59,6 +59,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
{ .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
{ .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot },
+ { .compatible = "mediatek,mt7623a", .data = &mtk_mt7623_boot },
};
static void __iomem *mtk_smp_base;
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 05/10] ARM: mediatek: add MT7623a smp bringup code
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Add support for booting secondary CPUs on MT7623a.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/mach-mediatek/mediatek.c | 2 ++
arch/arm/mach-mediatek/platsmp.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index c3cf215..6910b4e 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -30,6 +30,7 @@ static void __init mediatek_timer_init(void)
if (of_machine_is_compatible("mediatek,mt6589") ||
of_machine_is_compatible("mediatek,mt7623") ||
+ of_machine_is_compatible("mediatek,mt7623a") ||
of_machine_is_compatible("mediatek,mt8135") ||
of_machine_is_compatible("mediatek,mt8127")) {
/* turn on GPT6 which ungates arch timer clocks */
@@ -49,6 +50,7 @@ static const char * const mediatek_board_dt_compat[] = {
"mediatek,mt6589",
"mediatek,mt6592",
"mediatek,mt7623",
+ "mediatek,mt7623a",
"mediatek,mt8127",
"mediatek,mt8135",
NULL,
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 726eb69..27d78c9 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -59,6 +59,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
{ .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
{ .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot },
+ { .compatible = "mediatek,mt7623a", .data = &mtk_mt7623_boot },
};
static void __iomem *mtk_smp_base;
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 06/10] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: John Crispin <john@phrozen.org>
This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 805ba69..5e0dd79 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -19,7 +19,7 @@
/ {
chosen {
- stdout-path = &uart2;
+ stdout-path = "serial2:115200n8";
};
cpus {
@@ -43,6 +43,20 @@
memory@80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
};
&uart2 {
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 06/10] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: john-Pj+rj9U5foFAfugRpC6u6w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 805ba69..5e0dd79 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -19,7 +19,7 @@
/ {
chosen {
- stdout-path = &uart2;
+ stdout-path = "serial2:115200n8";
};
cpus {
@@ -43,6 +43,20 @@
memory@80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
};
&uart2 {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 06/10] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: John Crispin <john@phrozen.org>
This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 805ba69..5e0dd79 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -19,7 +19,7 @@
/ {
chosen {
- stdout-path = &uart2;
+ stdout-path = "serial2:115200n8";
};
cpus {
@@ -43,6 +43,20 @@
memory at 80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
};
&uart2 {
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 07/10] arm: dts: mt7623: enable the usb device on the mt7623n rfb
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: John Crispin <john@phrozen.org>
All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 5e0dd79..1e95790 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -49,6 +49,15 @@
serial1 = &uart1;
serial2 = &uart2;
};
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&uart0 {
@@ -72,3 +81,12 @@
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vmc_reg>;
};
+
+&usb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 07/10] arm: dts: mt7623: enable the usb device on the mt7623n rfb
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: john-Pj+rj9U5foFAfugRpC6u6w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 5e0dd79..1e95790 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -49,6 +49,15 @@
serial1 = &uart1;
serial2 = &uart2;
};
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&uart0 {
@@ -72,3 +81,12 @@
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vmc_reg>;
};
+
+&usb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 07/10] arm: dts: mt7623: enable the usb device on the mt7623n rfb
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: John Crispin <john@phrozen.org>
All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 5e0dd79..1e95790 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -49,6 +49,15 @@
serial1 = &uart1;
serial2 = &uart2;
};
+
+ usb_p1_vbus: regulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&uart0 {
@@ -72,3 +81,12 @@
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vmc_reg>;
};
+
+&usb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 08/10] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: John Crispin <john@phrozen.org>
Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 88 ++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index ba7d1ab..63ffb78 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -19,3 +19,91 @@
model = "MediaTek MT7623N NAND reference board";
compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
};
+
+&pio {
+ nand_pins_default: nanddefault {
+ pins_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins_we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+};
+
+&nandc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+ nand@0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition@C0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition@2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition@4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition@5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&bch {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 08/10] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: john-Pj+rj9U5foFAfugRpC6u6w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 88 ++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index ba7d1ab..63ffb78 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -19,3 +19,91 @@
model = "MediaTek MT7623N NAND reference board";
compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
};
+
+&pio {
+ nand_pins_default: nanddefault {
+ pins_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins_we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+};
+
+&nandc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+ nand@0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition@C0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition@2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition@4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition@5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&bch {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 08/10] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
@ 2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: John Crispin <john@phrozen.org>
Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 88 ++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index ba7d1ab..63ffb78 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -19,3 +19,91 @@
model = "MediaTek MT7623N NAND reference board";
compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
};
+
+&pio {
+ nand_pins_default: nanddefault {
+ pins_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins_we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+};
+
+&nandc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+ nand at 0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition at 40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition at C0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition at 140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition at 2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition at 4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition at 5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&bch {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 09/10] arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
2017-07-31 7:36 ` sean.wang
(?)
@ 2017-07-31 7:36 ` sean.wang
-1 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/mt7623.dtsi | 120 +++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
4 files changed, 561 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index ae011b2..1caa9d2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -49,6 +49,8 @@ Supported boards:
- Reference board for MT7623n with NAND:
Required root node properties:
- compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+- Bananapi BPI-R2 board:
+ - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f3a2442..736abbf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1050,6 +1050,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt7623n-rfb-nand.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 937a550..86cab5c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -21,12 +21,58 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
#include "skeleton64.dtsi"
/ {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-98000000 {
+ opp-hz = /bits/ 64 <98000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-198000000 {
+ opp-hz = /bits/ 64 <198000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-398000000 {
+ opp-hz = /bits/ 64 <398000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-598000000 {
+ opp-hz = /bits/ 64 <598000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-747500000 {
+ opp-hz = /bits/ 64 <747500000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-1040000000 {
+ opp-hz = /bits/ 64 <1040000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1196000000 {
+ opp-hz = /bits/ 64 <1196000000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1300000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -36,21 +82,31 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
+ operating-points-v2 = <&cpu_opp_table>;
};
};
@@ -74,6 +130,56 @@
clock-output-names = "clk26m";
};
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu_passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu_active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
@@ -172,7 +278,7 @@
clock-names = "spi", "wrap";
};
- cir: cir@0x10013000 {
+ cir: cir@10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -193,7 +299,7 @@
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
- reg = <0 0x10206000 0 0x1000>;
+ reg = <0 0x10206000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
thermal_calibration_data: calib@424 {
@@ -561,7 +667,8 @@
};
u3phy1: usb-phy@1a1c4000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -599,7 +706,8 @@
};
u3phy2: usb-phy@1a244000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -639,7 +747,9 @@
};
eth: ethernet@1b100000 {
- compatible = "mediatek,mt2701-eth", "syscon";
+ compatible = "mediatek,mt7623-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
reg = <0 0x1b100000 0 0x20000>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 0000000..9f3e6dd
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,443 @@
+/*
+ * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "Bananapi BPI-R2";
+ compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ red {
+ label = "bpi-r2:pio:red";
+ gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green {
+ label = "bpi-r2:pio:green";
+ gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue {
+ label = "bpi-r2:pio:blue";
+ gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cir_pins_a>;
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ pinctrl-names = "default";
+ reset-gpios = <&pio 33 0>;
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan0";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ cir_pins_a:cir@0 {
+ pins_cir {
+ pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins_a: i2c@0 {
+ pins_i2c0 {
+ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c@1 {
+ pin_i2c1 {
+ pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+ <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2s0_pins_a: i2s@0 {
+ pin_i2s0 {
+ pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+ <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+ <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+ <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+ <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ i2s1_pins_a: i2s@1 {
+ pin_i2s1 {
+ pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+ <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+ <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+ <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+ <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ key_pins_a: keys@0 {
+ pins_keys {
+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+ input-enable;
+ };
+ };
+
+ led_pins_a: leds@0 {
+ pins_leds {
+ pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+ <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+ <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ spi0_pins_a: spi@0 {
+ pins_spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ pwm_pins_a: pwm@0 {
+ pins_pwm {
+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+ };
+ };
+
+ uart0_pins_a: uart@0 {
+ pins_dat {
+ pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+ <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins_a: uart@1 {
+ pins_dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&pwrap {
+ mt6323 {
+ mt6323led: led {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "bpi-r2:isink:green";
+ default-state = "off";
+ };
+ led@1 {
+ reg = <1>;
+ label = "bpi-r2:isink:red";
+ default-state = "off";
+ };
+ led@2 {
+ reg = <2>;
+ label = "bpi-r2:isink:blue";
+ default-state = "off";
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "disabled";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "disabled";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
+
+&usb2 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 09/10] arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/mt7623.dtsi | 120 +++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
4 files changed, 561 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index ae011b2..1caa9d2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -49,6 +49,8 @@ Supported boards:
- Reference board for MT7623n with NAND:
Required root node properties:
- compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+- Bananapi BPI-R2 board:
+ - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f3a2442..736abbf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1050,6 +1050,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt7623n-rfb-nand.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 937a550..86cab5c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -21,12 +21,58 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
#include "skeleton64.dtsi"
/ {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-98000000 {
+ opp-hz = /bits/ 64 <98000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-198000000 {
+ opp-hz = /bits/ 64 <198000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-398000000 {
+ opp-hz = /bits/ 64 <398000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-598000000 {
+ opp-hz = /bits/ 64 <598000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-747500000 {
+ opp-hz = /bits/ 64 <747500000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-1040000000 {
+ opp-hz = /bits/ 64 <1040000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1196000000 {
+ opp-hz = /bits/ 64 <1196000000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1300000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -36,21 +82,31 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
+ operating-points-v2 = <&cpu_opp_table>;
};
};
@@ -74,6 +130,56 @@
clock-output-names = "clk26m";
};
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu_passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu_active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
@@ -172,7 +278,7 @@
clock-names = "spi", "wrap";
};
- cir: cir@0x10013000 {
+ cir: cir@10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -193,7 +299,7 @@
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
- reg = <0 0x10206000 0 0x1000>;
+ reg = <0 0x10206000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
thermal_calibration_data: calib@424 {
@@ -561,7 +667,8 @@
};
u3phy1: usb-phy@1a1c4000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -599,7 +706,8 @@
};
u3phy2: usb-phy@1a244000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -639,7 +747,9 @@
};
eth: ethernet@1b100000 {
- compatible = "mediatek,mt2701-eth", "syscon";
+ compatible = "mediatek,mt7623-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
reg = <0 0x1b100000 0 0x20000>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 0000000..9f3e6dd
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,443 @@
+/*
+ * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "Bananapi BPI-R2";
+ compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ red {
+ label = "bpi-r2:pio:red";
+ gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green {
+ label = "bpi-r2:pio:green";
+ gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue {
+ label = "bpi-r2:pio:blue";
+ gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cir_pins_a>;
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ pinctrl-names = "default";
+ reset-gpios = <&pio 33 0>;
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan0";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ cir_pins_a:cir@0 {
+ pins_cir {
+ pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins_a: i2c@0 {
+ pins_i2c0 {
+ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c@1 {
+ pin_i2c1 {
+ pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+ <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2s0_pins_a: i2s@0 {
+ pin_i2s0 {
+ pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+ <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+ <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+ <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+ <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ i2s1_pins_a: i2s@1 {
+ pin_i2s1 {
+ pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+ <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+ <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+ <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+ <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ key_pins_a: keys@0 {
+ pins_keys {
+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+ input-enable;
+ };
+ };
+
+ led_pins_a: leds@0 {
+ pins_leds {
+ pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+ <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+ <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ spi0_pins_a: spi@0 {
+ pins_spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ pwm_pins_a: pwm@0 {
+ pins_pwm {
+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+ };
+ };
+
+ uart0_pins_a: uart@0 {
+ pins_dat {
+ pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+ <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins_a: uart@1 {
+ pins_dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&pwrap {
+ mt6323 {
+ mt6323led: led {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "bpi-r2:isink:green";
+ default-state = "off";
+ };
+ led@1 {
+ reg = <1>;
+ label = "bpi-r2:isink:red";
+ default-state = "off";
+ };
+ led@2 {
+ reg = <2>;
+ label = "bpi-r2:isink:blue";
+ default-state = "off";
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "disabled";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "disabled";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
+
+&usb2 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 09/10] arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/mt7623.dtsi | 120 +++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
4 files changed, 561 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index ae011b2..1caa9d2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -49,6 +49,8 @@ Supported boards:
- Reference board for MT7623n with NAND:
Required root node properties:
- compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+- Bananapi BPI-R2 board:
+ - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f3a2442..736abbf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1050,6 +1050,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt7623n-rfb-nand.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 937a550..86cab5c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -21,12 +21,58 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
#include "skeleton64.dtsi"
/ {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-98000000 {
+ opp-hz = /bits/ 64 <98000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-198000000 {
+ opp-hz = /bits/ 64 <198000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-398000000 {
+ opp-hz = /bits/ 64 <398000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-598000000 {
+ opp-hz = /bits/ 64 <598000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-747500000 {
+ opp-hz = /bits/ 64 <747500000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-1040000000 {
+ opp-hz = /bits/ 64 <1040000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1196000000 {
+ opp-hz = /bits/ 64 <1196000000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1300000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -36,21 +82,31 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
};
cpu1: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu2: cpu at 2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu3: cpu at 3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
+ operating-points-v2 = <&cpu_opp_table>;
};
};
@@ -74,6 +130,56 @@
clock-output-names = "clk26m";
};
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu_passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu_active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
@@ -172,7 +278,7 @@
clock-names = "spi", "wrap";
};
- cir: cir at 0x10013000 {
+ cir: cir at 10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -193,7 +299,7 @@
efuse: efuse at 10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
- reg = <0 0x10206000 0 0x1000>;
+ reg = <0 0x10206000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
thermal_calibration_data: calib at 424 {
@@ -561,7 +667,8 @@
};
u3phy1: usb-phy at 1a1c4000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -599,7 +706,8 @@
};
u3phy2: usb-phy at 1a244000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -639,7 +747,9 @@
};
eth: ethernet at 1b100000 {
- compatible = "mediatek,mt2701-eth", "syscon";
+ compatible = "mediatek,mt7623-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
reg = <0 0x1b100000 0 0x20000>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 0000000..9f3e6dd
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,443 @@
+/*
+ * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "Bananapi BPI-R2";
+ compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu at 0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu at 1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu at 2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu at 3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ red {
+ label = "bpi-r2:pio:red";
+ gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green {
+ label = "bpi-r2:pio:green";
+ gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue {
+ label = "bpi-r2:pio:blue";
+ gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory at 80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cir_pins_a>;
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch at 0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ pinctrl-names = "default";
+ reset-gpios = <&pio 33 0>;
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port at 0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan0";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ cir_pins_a:cir at 0 {
+ pins_cir {
+ pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins_a: i2c at 0 {
+ pins_i2c0 {
+ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c at 1 {
+ pin_i2c1 {
+ pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+ <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2s0_pins_a: i2s at 0 {
+ pin_i2s0 {
+ pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+ <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+ <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+ <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+ <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ i2s1_pins_a: i2s at 1 {
+ pin_i2s1 {
+ pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+ <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+ <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+ <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+ <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ key_pins_a: keys at 0 {
+ pins_keys {
+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+ input-enable;
+ };
+ };
+
+ led_pins_a: leds at 0 {
+ pins_leds {
+ pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+ <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+ <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ spi0_pins_a: spi at 0 {
+ pins_spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ pwm_pins_a: pwm at 0 {
+ pins_pwm {
+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+ };
+ };
+
+ uart0_pins_a: uart at 0 {
+ pins_dat {
+ pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+ <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins_a: uart at 1 {
+ pins_dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&pwrap {
+ mt6323 {
+ mt6323led: led {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led at 0 {
+ reg = <0>;
+ label = "bpi-r2:isink:green";
+ default-state = "off";
+ };
+ led at 1 {
+ reg = <1>;
+ label = "bpi-r2:isink:red";
+ default-state = "off";
+ };
+ led at 2 {
+ reg = <2>;
+ label = "bpi-r2:isink:blue";
+ default-state = "off";
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "disabled";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "disabled";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
+
+&usb2 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 10/10] arm: dts: mt7623: add clock-frequency to CPU nodes
2017-07-31 7:36 ` sean.wang
(?)
@ 2017-07-31 7:36 ` sean.wang
-1 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add clock-frequency property to CPU nodes. Avoids warnings like
[ 0.001568] /cpus/cpu@0 missing clock-frequency property
[ 0.001588] /cpus/cpu@1 missing clock-frequency property
[ 0.001601] /cpus/cpu@2 missing clock-frequency property
[ 0.001614] /cpus/cpu@3 missing clock-frequency property
at boot time
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 86cab5c..4ae0ab0 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -89,24 +89,28 @@
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <7>;
+ clock-frequency = <1300000000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 10/10] arm: dts: mt7623: add clock-frequency to CPU nodes
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang @ 2017-07-31 7:36 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
Add clock-frequency property to CPU nodes. Avoids warnings like
[ 0.001568] /cpus/cpu@0 missing clock-frequency property
[ 0.001588] /cpus/cpu@1 missing clock-frequency property
[ 0.001601] /cpus/cpu@2 missing clock-frequency property
[ 0.001614] /cpus/cpu@3 missing clock-frequency property
at boot time
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 86cab5c..4ae0ab0 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -89,24 +89,28 @@
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <7>;
+ clock-frequency = <1300000000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v5 10/10] arm: dts: mt7623: add clock-frequency to CPU nodes
@ 2017-07-31 7:36 ` sean.wang
0 siblings, 0 replies; 42+ messages in thread
From: sean.wang at mediatek.com @ 2017-07-31 7:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Add clock-frequency property to CPU nodes. Avoids warnings like
[ 0.001568] /cpus/cpu at 0 missing clock-frequency property
[ 0.001588] /cpus/cpu at 1 missing clock-frequency property
[ 0.001601] /cpus/cpu at 2 missing clock-frequency property
[ 0.001614] /cpus/cpu at 3 missing clock-frequency property
at boot time
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 86cab5c..4ae0ab0 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -89,24 +89,28 @@
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <7>;
+ clock-frequency = <1300000000>;
};
cpu1: cpu at 1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
cpu2: cpu at 2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
cpu3: cpu at 3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 42+ messages in thread
* Re: [PATCH v5 00/10] arm: dts: extend mt7623 support
@ 2017-08-01 12:05 ` Matthias Brugger
0 siblings, 0 replies; 42+ messages in thread
From: Matthias Brugger @ 2017-08-01 12:05 UTC (permalink / raw)
To: sean.wang, robh+dt, mark.rutland, devicetree, linux-mediatek
Cc: john, linux-arm-kernel, linux-kernel
On 07/31/2017 09:36 AM, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Change since v4:
> - split mt6323 nodes as the independent item which tends to integration with
> other MediaTek SoCs
> - enhanced commit log
> - fixed up building warning shown in make dtsb
> - added clock-frequency to CPU nodes to avoid warning in boot time
> - added more nodes into the SoC-level file mt7623.dtsi such as CPU OPP table
> and thermal zone treating CPU as one of cooling devices
> - cleaned up the file mt7623n-bananapi-bpi-r2.dts such as listing nodes in
> alphabetical order
>
> Changes since v3:
> - explain in the commit message why this binding is changed
> - patches for dt-binding is reordered at the beginning of patch list
> - be concise wigh using SPDX-License-Identifier in new dts file
>
> Changes since v2:
> - exclude those patch are already queued into v4.11-next/dts32
> - exclude those patches already sent in separation
> - add mt7623a SoC basic support
> - update binding SoC for mt7623n and relevant boards
>
> Changes since v1:
> Continue the upstream journey based on the previous John Crispin's good work.
> - add fixes for the v1 suggestion
> - fix typo in the commit log
> - add missing pinctrl bindings for mt7623
> - reuse pinctrl driver for mt7623
> - enhance existing nodes since the way for binding is changed e.g USB
> - add more nodes which already gets support from the latest tree e.g MT7530 DSA
> - add the dts file for Bananapi R2 (BPI-R2) board
>
> John Crispin (4):
> arm: dts: mt7623: add mt6323.dtsi file
> arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
> arm: dts: mt7623: enable the usb device on the mt7623n rfb
> arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
>
> Sean Wang (6):
> dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
> dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC
> Platform
> arm: dts: mt7623: rename mt7623-evb.dts to
> arch/arm/boot/dts/mt7623n-rfb.dtsi
> ARM: mediatek: add MT7623a smp bringup code
> arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
> arm: dts: mt7623: add clock-frequency to CPU nodes
>
All but patch 5 pushed to v4.13-next/dts32
Patch 5 went to v4.13-next/soc
Thanks,
Matthias
> Documentation/devicetree/bindings/arm/mediatek.txt | 14 +-
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++
> arch/arm/boot/dts/mt7623-evb.dts | 33 --
> arch/arm/boot/dts/mt7623.dtsi | 132 +++++-
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
> arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 +++++
> arch/arm/boot/dts/mt7623n-rfb.dtsi | 92 +++++
> arch/arm/mach-mediatek/mediatek.c | 2 +
> arch/arm/mach-mediatek/platsmp.c | 1 +
> 10 files changed, 1021 insertions(+), 49 deletions(-)
> create mode 100644 arch/arm/boot/dts/mt6323.dtsi
> delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
>
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v5 00/10] arm: dts: extend mt7623 support
@ 2017-08-01 12:05 ` Matthias Brugger
0 siblings, 0 replies; 42+ messages in thread
From: Matthias Brugger @ 2017-08-01 12:05 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: john-Pj+rj9U5foFAfugRpC6u6w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 07/31/2017 09:36 AM, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> Change since v4:
> - split mt6323 nodes as the independent item which tends to integration with
> other MediaTek SoCs
> - enhanced commit log
> - fixed up building warning shown in make dtsb
> - added clock-frequency to CPU nodes to avoid warning in boot time
> - added more nodes into the SoC-level file mt7623.dtsi such as CPU OPP table
> and thermal zone treating CPU as one of cooling devices
> - cleaned up the file mt7623n-bananapi-bpi-r2.dts such as listing nodes in
> alphabetical order
>
> Changes since v3:
> - explain in the commit message why this binding is changed
> - patches for dt-binding is reordered at the beginning of patch list
> - be concise wigh using SPDX-License-Identifier in new dts file
>
> Changes since v2:
> - exclude those patch are already queued into v4.11-next/dts32
> - exclude those patches already sent in separation
> - add mt7623a SoC basic support
> - update binding SoC for mt7623n and relevant boards
>
> Changes since v1:
> Continue the upstream journey based on the previous John Crispin's good work.
> - add fixes for the v1 suggestion
> - fix typo in the commit log
> - add missing pinctrl bindings for mt7623
> - reuse pinctrl driver for mt7623
> - enhance existing nodes since the way for binding is changed e.g USB
> - add more nodes which already gets support from the latest tree e.g MT7530 DSA
> - add the dts file for Bananapi R2 (BPI-R2) board
>
> John Crispin (4):
> arm: dts: mt7623: add mt6323.dtsi file
> arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
> arm: dts: mt7623: enable the usb device on the mt7623n rfb
> arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
>
> Sean Wang (6):
> dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
> dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC
> Platform
> arm: dts: mt7623: rename mt7623-evb.dts to
> arch/arm/boot/dts/mt7623n-rfb.dtsi
> ARM: mediatek: add MT7623a smp bringup code
> arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
> arm: dts: mt7623: add clock-frequency to CPU nodes
>
All but patch 5 pushed to v4.13-next/dts32
Patch 5 went to v4.13-next/soc
Thanks,
Matthias
> Documentation/devicetree/bindings/arm/mediatek.txt | 14 +-
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++
> arch/arm/boot/dts/mt7623-evb.dts | 33 --
> arch/arm/boot/dts/mt7623.dtsi | 132 +++++-
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
> arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 +++++
> arch/arm/boot/dts/mt7623n-rfb.dtsi | 92 +++++
> arch/arm/mach-mediatek/mediatek.c | 2 +
> arch/arm/mach-mediatek/platsmp.c | 1 +
> 10 files changed, 1021 insertions(+), 49 deletions(-)
> create mode 100644 arch/arm/boot/dts/mt6323.dtsi
> delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v5 00/10] arm: dts: extend mt7623 support
@ 2017-08-01 12:05 ` Matthias Brugger
0 siblings, 0 replies; 42+ messages in thread
From: Matthias Brugger @ 2017-08-01 12:05 UTC (permalink / raw)
To: linux-arm-kernel
On 07/31/2017 09:36 AM, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Change since v4:
> - split mt6323 nodes as the independent item which tends to integration with
> other MediaTek SoCs
> - enhanced commit log
> - fixed up building warning shown in make dtsb
> - added clock-frequency to CPU nodes to avoid warning in boot time
> - added more nodes into the SoC-level file mt7623.dtsi such as CPU OPP table
> and thermal zone treating CPU as one of cooling devices
> - cleaned up the file mt7623n-bananapi-bpi-r2.dts such as listing nodes in
> alphabetical order
>
> Changes since v3:
> - explain in the commit message why this binding is changed
> - patches for dt-binding is reordered at the beginning of patch list
> - be concise wigh using SPDX-License-Identifier in new dts file
>
> Changes since v2:
> - exclude those patch are already queued into v4.11-next/dts32
> - exclude those patches already sent in separation
> - add mt7623a SoC basic support
> - update binding SoC for mt7623n and relevant boards
>
> Changes since v1:
> Continue the upstream journey based on the previous John Crispin's good work.
> - add fixes for the v1 suggestion
> - fix typo in the commit log
> - add missing pinctrl bindings for mt7623
> - reuse pinctrl driver for mt7623
> - enhance existing nodes since the way for binding is changed e.g USB
> - add more nodes which already gets support from the latest tree e.g MT7530 DSA
> - add the dts file for Bananapi R2 (BPI-R2) board
>
> John Crispin (4):
> arm: dts: mt7623: add mt6323.dtsi file
> arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
> arm: dts: mt7623: enable the usb device on the mt7623n rfb
> arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
>
> Sean Wang (6):
> dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
> dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC
> Platform
> arm: dts: mt7623: rename mt7623-evb.dts to
> arch/arm/boot/dts/mt7623n-rfb.dtsi
> ARM: mediatek: add MT7623a smp bringup code
> arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
> arm: dts: mt7623: add clock-frequency to CPU nodes
>
All but patch 5 pushed to v4.13-next/dts32
Patch 5 went to v4.13-next/soc
Thanks,
Matthias
> Documentation/devicetree/bindings/arm/mediatek.txt | 14 +-
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/mt6323.dtsi | 241 +++++++++++
> arch/arm/boot/dts/mt7623-evb.dts | 33 --
> arch/arm/boot/dts/mt7623.dtsi | 132 +++++-
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 443 +++++++++++++++++++++
> arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 +++++
> arch/arm/boot/dts/mt7623n-rfb.dtsi | 92 +++++
> arch/arm/mach-mediatek/mediatek.c | 2 +
> arch/arm/mach-mediatek/platsmp.c | 1 +
> 10 files changed, 1021 insertions(+), 49 deletions(-)
> create mode 100644 arch/arm/boot/dts/mt6323.dtsi
> delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
> create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
>
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-08-02 1:47 ` Yingjoe Chen
0 siblings, 0 replies; 42+ messages in thread
From: Yingjoe Chen @ 2017-08-02 1:47 UTC (permalink / raw)
To: sean.wang
Cc: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek,
linux-kernel, linux-arm-kernel, john
On Mon, 2017-07-31 at 15:36 +0800, sean.wang@mediatek.com wrote:
<...>
> diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> index b60b41c..0686ad7 100644
> --- a/arch/arm/boot/dts/mt7623-evb.dts
> +++ b/arch/arm/boot/dts/mt7623-evb.dts
> @@ -14,6 +14,7 @@
>
> /dts-v1/;
> #include "mt7623.dtsi"
> +#include "mt6323.dtsi"
>
> / {
> model = "MediaTek MT7623 evaluation board";
> @@ -23,6 +24,24 @@
> stdout-path = &uart2;
> };
>
> + cpus {
> + cpu0 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu1 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu2 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu3 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> + };
> +
> memory {
> reg = <0 0x80000000 0 0x40000000>;
> };
> @@ -31,3 +50,13 @@
> &uart2 {
> status = "okay";
> };
> +
> +&mmc0 {
> + vmmc-supply = <&mt6323_vemc3v3_reg>;
> + vqmmc-supply = <&mt6323_vio18_reg>;
> +};
> +
> +&mmc1 {
> + vmmc-supply = <&mt6323_vmch_reg>;
> + vqmmc-supply = <&mt6323_vmc_reg>;
> +};
Please keep nodes sorted.
Joe.C
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-08-02 1:47 ` Yingjoe Chen
0 siblings, 0 replies; 42+ messages in thread
From: Yingjoe Chen @ 2017-08-02 1:47 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
john-Pj+rj9U5foFAfugRpC6u6w
On Mon, 2017-07-31 at 15:36 +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
<...>
> diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> index b60b41c..0686ad7 100644
> --- a/arch/arm/boot/dts/mt7623-evb.dts
> +++ b/arch/arm/boot/dts/mt7623-evb.dts
> @@ -14,6 +14,7 @@
>
> /dts-v1/;
> #include "mt7623.dtsi"
> +#include "mt6323.dtsi"
>
> / {
> model = "MediaTek MT7623 evaluation board";
> @@ -23,6 +24,24 @@
> stdout-path = &uart2;
> };
>
> + cpus {
> + cpu0 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu1 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu2 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu3 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> + };
> +
> memory {
> reg = <0 0x80000000 0 0x40000000>;
> };
> @@ -31,3 +50,13 @@
> &uart2 {
> status = "okay";
> };
> +
> +&mmc0 {
> + vmmc-supply = <&mt6323_vemc3v3_reg>;
> + vqmmc-supply = <&mt6323_vio18_reg>;
> +};
> +
> +&mmc1 {
> + vmmc-supply = <&mt6323_vmch_reg>;
> + vqmmc-supply = <&mt6323_vmc_reg>;
> +};
Please keep nodes sorted.
Joe.C
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-08-02 1:47 ` Yingjoe Chen
0 siblings, 0 replies; 42+ messages in thread
From: Yingjoe Chen @ 2017-08-02 1:47 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 2017-07-31 at 15:36 +0800, sean.wang at mediatek.com wrote:
<...>
> diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> index b60b41c..0686ad7 100644
> --- a/arch/arm/boot/dts/mt7623-evb.dts
> +++ b/arch/arm/boot/dts/mt7623-evb.dts
> @@ -14,6 +14,7 @@
>
> /dts-v1/;
> #include "mt7623.dtsi"
> +#include "mt6323.dtsi"
>
> / {
> model = "MediaTek MT7623 evaluation board";
> @@ -23,6 +24,24 @@
> stdout-path = &uart2;
> };
>
> + cpus {
> + cpu0 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu1 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu2 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> +
> + cpu3 {
> + proc-supply = <&mt6323_vproc_reg>;
> + };
> + };
> +
> memory {
> reg = <0 0x80000000 0 0x40000000>;
> };
> @@ -31,3 +50,13 @@
> &uart2 {
> status = "okay";
> };
> +
> +&mmc0 {
> + vmmc-supply = <&mt6323_vemc3v3_reg>;
> + vqmmc-supply = <&mt6323_vio18_reg>;
> +};
> +
> +&mmc1 {
> + vmmc-supply = <&mt6323_vmch_reg>;
> + vqmmc-supply = <&mt6323_vmc_reg>;
> +};
Please keep nodes sorted.
Joe.C
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
2017-08-02 1:47 ` Yingjoe Chen
(?)
@ 2017-08-02 2:02 ` Sean Wang
-1 siblings, 0 replies; 42+ messages in thread
From: Sean Wang @ 2017-08-02 2:02 UTC (permalink / raw)
To: Yingjoe Chen
Cc: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek,
linux-kernel, linux-arm-kernel, john
On Wed, 2017-08-02 at 09:47 +0800, Yingjoe Chen wrote:
> On Mon, 2017-07-31 at 15:36 +0800, sean.wang@mediatek.com wrote:
> <...>
> > diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> > index b60b41c..0686ad7 100644
> > --- a/arch/arm/boot/dts/mt7623-evb.dts
> > +++ b/arch/arm/boot/dts/mt7623-evb.dts
> > @@ -14,6 +14,7 @@
> >
> > /dts-v1/;
> > #include "mt7623.dtsi"
> > +#include "mt6323.dtsi"
> >
> > / {
> > model = "MediaTek MT7623 evaluation board";
> > @@ -23,6 +24,24 @@
> > stdout-path = &uart2;
> > };
> >
> > + cpus {
> > + cpu0 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu1 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu2 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu3 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > + };
> > +
> > memory {
> > reg = <0 0x80000000 0 0x40000000>;
> > };
> > @@ -31,3 +50,13 @@
> > &uart2 {
> > status = "okay";
> > };
> > +
> > +&mmc0 {
> > + vmmc-supply = <&mt6323_vemc3v3_reg>;
> > + vqmmc-supply = <&mt6323_vio18_reg>;
> > +};
> > +
> > +&mmc1 {
> > + vmmc-supply = <&mt6323_vmch_reg>;
> > + vqmmc-supply = <&mt6323_vmc_reg>;
> > +};
>
> Please keep nodes sorted.
>
> Joe.C
>
>
Hi, Joe.C
I will have note for this. Those would be fixed up along with following
patches when mt7623a dts is introduced.
Sean
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-08-02 2:02 ` Sean Wang
0 siblings, 0 replies; 42+ messages in thread
From: Sean Wang @ 2017-08-02 2:02 UTC (permalink / raw)
To: Yingjoe Chen
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
john-Pj+rj9U5foFAfugRpC6u6w
On Wed, 2017-08-02 at 09:47 +0800, Yingjoe Chen wrote:
> On Mon, 2017-07-31 at 15:36 +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> <...>
> > diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> > index b60b41c..0686ad7 100644
> > --- a/arch/arm/boot/dts/mt7623-evb.dts
> > +++ b/arch/arm/boot/dts/mt7623-evb.dts
> > @@ -14,6 +14,7 @@
> >
> > /dts-v1/;
> > #include "mt7623.dtsi"
> > +#include "mt6323.dtsi"
> >
> > / {
> > model = "MediaTek MT7623 evaluation board";
> > @@ -23,6 +24,24 @@
> > stdout-path = &uart2;
> > };
> >
> > + cpus {
> > + cpu0 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu1 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu2 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu3 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > + };
> > +
> > memory {
> > reg = <0 0x80000000 0 0x40000000>;
> > };
> > @@ -31,3 +50,13 @@
> > &uart2 {
> > status = "okay";
> > };
> > +
> > +&mmc0 {
> > + vmmc-supply = <&mt6323_vemc3v3_reg>;
> > + vqmmc-supply = <&mt6323_vio18_reg>;
> > +};
> > +
> > +&mmc1 {
> > + vmmc-supply = <&mt6323_vmch_reg>;
> > + vqmmc-supply = <&mt6323_vmc_reg>;
> > +};
>
> Please keep nodes sorted.
>
> Joe.C
>
>
Hi, Joe.C
I will have note for this. Those would be fixed up along with following
patches when mt7623a dts is introduced.
Sean
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file
@ 2017-08-02 2:02 ` Sean Wang
0 siblings, 0 replies; 42+ messages in thread
From: Sean Wang @ 2017-08-02 2:02 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2017-08-02 at 09:47 +0800, Yingjoe Chen wrote:
> On Mon, 2017-07-31 at 15:36 +0800, sean.wang at mediatek.com wrote:
> <...>
> > diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
> > index b60b41c..0686ad7 100644
> > --- a/arch/arm/boot/dts/mt7623-evb.dts
> > +++ b/arch/arm/boot/dts/mt7623-evb.dts
> > @@ -14,6 +14,7 @@
> >
> > /dts-v1/;
> > #include "mt7623.dtsi"
> > +#include "mt6323.dtsi"
> >
> > / {
> > model = "MediaTek MT7623 evaluation board";
> > @@ -23,6 +24,24 @@
> > stdout-path = &uart2;
> > };
> >
> > + cpus {
> > + cpu0 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu1 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu2 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > +
> > + cpu3 {
> > + proc-supply = <&mt6323_vproc_reg>;
> > + };
> > + };
> > +
> > memory {
> > reg = <0 0x80000000 0 0x40000000>;
> > };
> > @@ -31,3 +50,13 @@
> > &uart2 {
> > status = "okay";
> > };
> > +
> > +&mmc0 {
> > + vmmc-supply = <&mt6323_vemc3v3_reg>;
> > + vqmmc-supply = <&mt6323_vio18_reg>;
> > +};
> > +
> > +&mmc1 {
> > + vmmc-supply = <&mt6323_vmch_reg>;
> > + vqmmc-supply = <&mt6323_vmc_reg>;
> > +};
>
> Please keep nodes sorted.
>
> Joe.C
>
>
Hi, Joe.C
I will have note for this. Those would be fixed up along with following
patches when mt7623a dts is introduced.
Sean
^ permalink raw reply [flat|nested] 42+ messages in thread
end of thread, other threads:[~2017-08-02 2:02 UTC | newest]
Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-31 7:36 [PATCH v5 00/10] arm: dts: extend mt7623 support sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang
2017-07-31 7:36 ` [PATCH v5 01/10] dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 02/10] dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang
2017-07-31 7:36 ` [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-08-02 1:47 ` Yingjoe Chen
2017-08-02 1:47 ` Yingjoe Chen
2017-08-02 1:47 ` Yingjoe Chen
2017-08-02 2:02 ` Sean Wang
2017-08-02 2:02 ` Sean Wang
2017-08-02 2:02 ` Sean Wang
2017-07-31 7:36 ` [PATCH v5 04/10] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang
2017-07-31 7:36 ` [PATCH v5 05/10] ARM: mediatek: add MT7623a smp bringup code sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 06/10] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 07/10] arm: dts: mt7623: enable the usb device on the mt7623n rfb sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 08/10] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 09/10] arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang
2017-07-31 7:36 ` [PATCH v5 10/10] arm: dts: mt7623: add clock-frequency to CPU nodes sean.wang
2017-07-31 7:36 ` sean.wang at mediatek.com
2017-07-31 7:36 ` sean.wang
2017-08-01 12:05 ` [PATCH v5 00/10] arm: dts: extend mt7623 support Matthias Brugger
2017-08-01 12:05 ` Matthias Brugger
2017-08-01 12:05 ` Matthias Brugger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.