[PATCH v2 0/6] mmc: core: extend mmc_fixup_device and transplant ti,wl1251 quirks from to be retired omap_hsmmc

[PATCH v2 0/6] mmc: core: extend mmc_fixup_device and transplant ti,wl1251 quirks from to be retired omap_hsmmc

[H. Nikolaus Schaller]

PATCH V2 2021-11-10 18:17:11:
* remove setting card->ocr = 0x80 because it is no longer needed (by H. Nikolaus Schaller <hns@goldelico.com>)
* include patch "mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO" by Ulf Hansson <ulf.hansson@linaro.org>

PATCH V1 2021-11-09 11:59:08:
* merge call of mmc_fixup_device for sdio into other commit (suggested by Ulf Hansson <ulf.hansson@linaro.org>)
* do not call mmc_fixup_device(card, sdio_card_init_methods) for mmc and sd interfaces, just sdio (suggested by Ulf Hansson <ulf.hansson@linaro.org>)
* do not use a matching list but a single string constant (suggested by Ulf Hansson <ulf.hansson@linaro.org>)
* switched to "[PATCH v1]" (suggested by Ulf Hansson <ulf.hansson@linaro.org>)

RFC V4 2021-11-05 10:05:51:
* remove const from char *const * (Ulf Hansson <ulf.hansson@linaro.org>)
* use for_each_child_of_node() to scan compatible children (Ulf Hansson <ulf.hansson@linaro.org>)
(see: https://lore.kernel.org/lkml/CAPDyKFpr0kpRXoUACNNSwe8pL1S9wJPjnX+GFGS1PNezKCDYzQ@mail.gmail.com/)

RFC V3 2021-11-03 14:00:13:
* patches have been split into smaller ones a little further
* propose a new macro for setup of device tree compatible quirks
* directly include patches by jerome.pouiller@silabs.com
  in this series

RFC V2 2021-11-01 10:24:26:
* reworked to not misuse mmc_select_card() but add a call to
  mmc_fixup_device() right after where host->ops->init_card
  was called before to apply the wl1251 specific quirks.
  Device tree matching is done by a new table passed to mmc_fixup_device().
  suggested by: ulf.hansson@linaro.org
  based on patches by: jerome.pouiller@silabs.com

RFC V1 2021-10-06 13:24:13:


H. Nikolaus Schaller (3):
  mmc: core: provide macro and table to match the device tree to apply
    quirks
  mmc: core: transplant ti,wl1251 quirks from to be retired omap_hsmmc
  mmc: host: omap_hsmmc: revert special init for wl1251

Jérôme Pouiller (2):
  mmc: core: rewrite mmc_fixup_device()
  mmc: core: allow to match the device tree to apply quirks

Ulf Hansson (1):
  mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

 drivers/mmc/core/card.h       | 36 ++++++++++++++++++++
 drivers/mmc/core/quirks.h     | 64 +++++++++++++++++++++++++----------
 drivers/mmc/core/sdio.c       |  5 ++-
 drivers/mmc/host/omap_hsmmc.c | 36 --------------------
 4 files changed, 87 insertions(+), 54 deletions(-)

-- 
2.33.0

[PATCH v2 1/6] mmc: core: rewrite mmc_fixup_device()

[H. Nikolaus Schaller]

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Currently, mmc_fixup_device() is a bit difficult to read because of
particularly long condition.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/mmc/core/quirks.h | 41 +++++++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 17 deletions(-)

diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
index d68e6e513a4f4..c7ef2d14b359f 100644
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -152,22 +152,29 @@ static inline void mmc_fixup_device(struct mmc_card *card,
 	u64 rev = cid_rev_card(card);
 
 	for (f = table; f->vendor_fixup; f++) {
-		if ((f->manfid == CID_MANFID_ANY ||
-		     f->manfid == card->cid.manfid) &&
-		    (f->oemid == CID_OEMID_ANY ||
-		     f->oemid == card->cid.oemid) &&
-		    (f->name == CID_NAME_ANY ||
-		     !strncmp(f->name, card->cid.prod_name,
-			      sizeof(card->cid.prod_name))) &&
-		    (f->cis_vendor == card->cis.vendor ||
-		     f->cis_vendor == (u16) SDIO_ANY_ID) &&
-		    (f->cis_device == card->cis.device ||
-		     f->cis_device == (u16) SDIO_ANY_ID) &&
-		    (f->ext_csd_rev == EXT_CSD_REV_ANY ||
-		     f->ext_csd_rev == card->ext_csd.rev) &&
-		    rev >= f->rev_start && rev <= f->rev_end) {
-			dev_dbg(&card->dev, "calling %ps\n", f->vendor_fixup);
-			f->vendor_fixup(card, f->data);
-		}
+		if (f->manfid != CID_MANFID_ANY &&
+		    f->manfid != card->cid.manfid)
+			continue;
+		if (f->oemid != CID_OEMID_ANY &&
+		    f->oemid != card->cid.oemid)
+			continue;
+		if (f->name != CID_NAME_ANY &&
+		    strncmp(f->name, card->cid.prod_name,
+			    sizeof(card->cid.prod_name)))
+			continue;
+		if (f->cis_vendor != (u16)SDIO_ANY_ID &&
+		    f->cis_vendor != card->cis.vendor)
+			continue;
+		if (f->cis_device != (u16)SDIO_ANY_ID &&
+		    f->cis_device != card->cis.device)
+			continue;
+		if (f->ext_csd_rev != EXT_CSD_REV_ANY &&
+		    f->ext_csd_rev != card->ext_csd.rev)
+			continue;
+		if (rev < f->rev_start || rev > f->rev_end)
+			continue;
+
+		dev_dbg(&card->dev, "calling %ps\n", f->vendor_fixup);
+		f->vendor_fixup(card, f->data);
 	}
 }
-- 
2.33.0

[PATCH v2 2/6] mmc: core: allow to match the device tree to apply quirks

[H. Nikolaus Schaller]

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

MMC subsystem provides a way to apply quirks when a device match some
properties (VID, PID, etc...) Unfortunately, some SDIO devices do not
comply with the SDIO specification and does not provide reliable VID/PID
(eg. Silabs WF200).

So, the drivers for these devices rely on device tree to identify the
device.

This patch allows the MMC to also rely on the device tree to apply a
quirk.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/mmc/core/card.h   |  3 +++
 drivers/mmc/core/quirks.h | 17 +++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
index 7bd392d55cfa5..483e7f2f1039e 100644
--- a/drivers/mmc/core/card.h
+++ b/drivers/mmc/core/card.h
@@ -59,6 +59,9 @@ struct mmc_fixup {
 	/* for MMC cards */
 	unsigned int ext_csd_rev;
 
+	/* Match against functions declared in device tree */
+	const char *of_compatible;
+
 	void (*vendor_fixup)(struct mmc_card *card, int data);
 	int data;
 };
diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
index c7ef2d14b359f..4a767f2fbaaaa 100644
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -10,6 +10,7 @@
  *
  */
 
+#include <linux/of.h>
 #include <linux/mmc/sdio_ids.h>
 
 #include "card.h"
@@ -145,6 +146,19 @@ static const struct mmc_fixup __maybe_unused sdio_fixup_methods[] = {
 	END_FIXUP
 };
 
+static inline bool mmc_fixup_of_compatible_match(struct mmc_card *card,
+						 const char *compatible)
+{
+	struct device_node *np;
+
+	for_each_child_of_node(mmc_dev(card->host)->of_node, np) {
+		if (of_device_is_compatible(np, compatible))
+			return true;
+	}
+
+	return false;
+}
+
 static inline void mmc_fixup_device(struct mmc_card *card,
 				    const struct mmc_fixup *table)
 {
@@ -173,6 +187,9 @@ static inline void mmc_fixup_device(struct mmc_card *card,
 			continue;
 		if (rev < f->rev_start || rev > f->rev_end)
 			continue;
+		if (f->of_compatible &&
+		    !mmc_fixup_of_compatible_match(card, f->of_compatible))
+			continue;
 
 		dev_dbg(&card->dev, "calling %ps\n", f->vendor_fixup);
 		f->vendor_fixup(card, f->data);
-- 
2.33.0

[PATCH v2 3/6] mmc: core: provide macro and table to match the device tree to apply quirks

[H. Nikolaus Schaller]

This (initially empty) table allows to match quirks early based
on .compatible of the child node of some mmc/sdio interface.

This allows to add quirks based on device tree instead of having
card specific code in the host ops.

A new macro SDIO_FIXUP_COMPATIBLE makes the definition readable.

And we call mmc_fixup_device(sdio_card_init_methods) just after
where host->ops->init_card() can be optionally called.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/mmc/core/card.h   | 15 +++++++++++++++
 drivers/mmc/core/quirks.h |  4 ++++
 drivers/mmc/core/sdio.c   |  1 +
 3 files changed, 20 insertions(+)

diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
index 483e7f2f1039e..216faf5ad1021 100644
--- a/drivers/mmc/core/card.h
+++ b/drivers/mmc/core/card.h
@@ -122,6 +122,21 @@ struct mmc_fixup {
 		   _vendor, _device,					\
 		   _fixup, _data, EXT_CSD_REV_ANY)			\
 
+#define SDIO_FIXUP_COMPATIBLE(_compatible, _fixup, _data)		\
+	{						\
+		.name = CID_NAME_ANY,			\
+		.manfid = CID_MANFID_ANY,		\
+		.oemid = CID_OEMID_ANY,			\
+		.rev_start = 0,				\
+		.rev_end = -1ull,			\
+		.cis_vendor = SDIO_ANY_ID,		\
+		.cis_device = SDIO_ANY_ID,		\
+		.vendor_fixup = (_fixup),		\
+		.data = (_data),			\
+		.ext_csd_rev = EXT_CSD_REV_ANY,		\
+		.of_compatible = _compatible,	\
+	}
+
 #define cid_rev(hwrev, fwrev, year, month)	\
 	(((u64) hwrev) << 40 |			\
 	 ((u64) fwrev) << 32 |			\
diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
index 4a767f2fbaaaa..a23df65332cdf 100644
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -146,6 +146,10 @@ static const struct mmc_fixup __maybe_unused sdio_fixup_methods[] = {
 	END_FIXUP
 };
 
+static const struct mmc_fixup __maybe_unused sdio_card_init_methods[] = {
+	END_FIXUP
+};
+
 static inline bool mmc_fixup_of_compatible_match(struct mmc_card *card,
 						 const char *compatible)
 {
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 68edf7a615be5..cf8ee66990508 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -707,6 +707,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if (host->ops->init_card)
 		host->ops->init_card(host, card);
+	mmc_fixup_device(card, sdio_card_init_methods);
 
 	/*
 	 * If the host and card support UHS-I mode request the card
-- 
2.33.0

[PATCH v2 4/6] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[H. Nikolaus Schaller]

From: Ulf Hansson <ulf.hansson@linaro.org>

The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.

In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.

To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/mmc/core/sdio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index cf8ee66990508..41164748723d2 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -709,6 +709,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		host->ops->init_card(host, card);
 	mmc_fixup_device(card, sdio_card_init_methods);
 
+	card->ocr = ocr_card;
+
 	/*
 	 * If the host and card support UHS-I mode request the card
 	 * to switch to 1.8V signaling level.  No 1.8v signalling if
@@ -821,7 +823,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 			goto mismatch;
 		}
 	}
-	card->ocr = ocr_card;
+
 	mmc_fixup_device(card, sdio_fixup_methods);
 
 	if (card->type == MMC_TYPE_SD_COMBO) {
-- 
2.33.0

Re: [PATCH v2 4/6] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[H. Nikolaus Schaller]

> Am 10.11.2021 um 18:17 schrieb H. Nikolaus Schaller <hns@goldelico.com>:
> 
> From: Ulf Hansson <ulf.hansson@linaro.org>
> 
> The mmc core takes a specific path to support initializing of a
> non-standard SDIO card. This is triggered by looking for the card-quirk,
> MMC_QUIRK_NONSTD_SDIO.
> 
> 	if (card->type == MMC_TYPE_SD_COMBO) {
> -- 
> 2.33.0
> 

Sorry, I just recognised after pressing the send button that with "early"
you probably meant this to be 1/6... Should I resubmit?

BR,
Nikolaus

Re: [PATCH v2 4/6] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[Ulf Hansson]

On Wed, 10 Nov 2021 at 18:20, H. Nikolaus Schaller <hns@goldelico.com> wrote:
>
> > Am 10.11.2021 um 18:17 schrieb H. Nikolaus Schaller <hns@goldelico.com>:
> >
> > From: Ulf Hansson <ulf.hansson@linaro.org>
> >
> > The mmc core takes a specific path to support initializing of a
> > non-standard SDIO card. This is triggered by looking for the card-quirk,
> > MMC_QUIRK_NONSTD_SDIO.
> >
> >       if (card->type == MMC_TYPE_SD_COMBO) {
> > --
> > 2.33.0
> >
>
> Sorry, I just recognised after pressing the send button that with "early"
> you probably meant this to be 1/6... Should I resubmit?

No need to re-submit, this works fine!

Kind regards
Uffe

[PATCH v2 5/6] mmc: core: transplant ti,wl1251 quirks from to be retired omap_hsmmc

[H. Nikolaus Schaller]

The TiWi WL1251 WiFi chip needs special setup of the sdio
interface before it can be probed.

So far, this is done in omap_hsmmc_init_card() in omap_hsmmc.c
which makes it useable only if connected to omap devices
which use the omap_hsmmc. The OpenPandora is the most promient
example.

There are plans to switch to a newer sdhci-omap driver and
retire omap_hsmmc. Hence this quirk must be reworked or moved
somewhere else. Ideally to some location that is not dependent
on the specific SoC mmc host driver.

This is achieved by the new mmc_fixup_device() option introduced
by ("mmc: allow to match the device tree to apply quirks") to match
through device tree compatible string.

This quirk will be called early right after where host->ops->init_card()
and thus omap_hsmmc_init_card() was previously called.

Note that we do not need to transplant

	card->ocr = 0x80;

because we rely on ("mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO").

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/mmc/core/card.h   | 18 ++++++++++++++++++
 drivers/mmc/core/quirks.h |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
index 216faf5ad1021..99045e138ba48 100644
--- a/drivers/mmc/core/card.h
+++ b/drivers/mmc/core/card.h
@@ -168,6 +168,24 @@ static inline void __maybe_unused add_limit_rate_quirk(struct mmc_card *card,
 	card->quirk_max_rate = data;
 }
 
+static inline void __maybe_unused wl1251_quirk(struct mmc_card *card,
+					       int data)
+{
+	/*
+	 * We have TI wl1251 attached to this mmc. Pass this
+	 * information to the SDIO core because it can't be
+	 * probed by normal methods.
+	 */
+
+	dev_info(card->host->parent, "found wl1251\n");
+	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+	card->cccr.wide_bus = 1;
+	card->cis.vendor = 0x104c;
+	card->cis.device = 0x9066;
+	card->cis.blksize = 512;
+	card->cis.max_dtr = 24000000;
+}
+
 /*
  * Quirk add/remove for MMC products.
  */
diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
index a23df65332cdf..20f5687272778 100644
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -147,6 +147,8 @@ static const struct mmc_fixup __maybe_unused sdio_fixup_methods[] = {
 };
 
 static const struct mmc_fixup __maybe_unused sdio_card_init_methods[] = {
+	SDIO_FIXUP_COMPATIBLE("ti,wl1251", wl1251_quirk, 0),
+
 	END_FIXUP
 };
 
-- 
2.33.0

[PATCH v2 6/6] mmc: host: omap_hsmmc: revert special init for wl1251

[H. Nikolaus Schaller]

Replaces: commit f6498b922e57 ("mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card")
Requires: commit ("mmc: core: transplant ti,wl1251 quirks from to be retired omap_hsmmc")

After moving the wl1251 quirks from omap_hsmmc_init_card() to wl1251_quirk()
and sdio_card_init_methods[] we can remove omap_hsmmc_init_card() completely.

This also removes the specialization on the combination of omap_hsmmc and wl1251.

Related-to: commit f6498b922e57 ("mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card")
Related-to: commit 2398c41d6432 ("omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251")
Related-to: commit f9d50fef4b64 ("ARM: OMAP2+: omap3-pandora: add wifi support")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/mmc/host/omap_hsmmc.c | 36 -----------------------------------
 1 file changed, 36 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6960e305e0a39..9749639ea8977 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1504,41 +1504,6 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	omap_hsmmc_set_bus_mode(host);
 }
 
-static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
-{
-	struct omap_hsmmc_host *host = mmc_priv(mmc);
-
-	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
-		struct device_node *np = mmc_dev(mmc)->of_node;
-
-		/*
-		 * REVISIT: should be moved to sdio core and made more
-		 * general e.g. by expanding the DT bindings of child nodes
-		 * to provide a mechanism to provide this information:
-		 * Documentation/devicetree/bindings/mmc/mmc-card.txt
-		 */
-
-		np = of_get_compatible_child(np, "ti,wl1251");
-		if (np) {
-			/*
-			 * We have TI wl1251 attached to MMC3. Pass this
-			 * information to the SDIO core because it can't be
-			 * probed by normal methods.
-			 */
-
-			dev_info(host->dev, "found wl1251\n");
-			card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-			card->cccr.wide_bus = 1;
-			card->cis.vendor = 0x104c;
-			card->cis.device = 0x9066;
-			card->cis.blksize = 512;
-			card->cis.max_dtr = 24000000;
-			card->ocr = 0x80;
-			of_node_put(np);
-		}
-	}
-}
-
 static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct omap_hsmmc_host *host = mmc_priv(mmc);
@@ -1667,7 +1632,6 @@ static struct mmc_host_ops omap_hsmmc_ops = {
 	.set_ios = omap_hsmmc_set_ios,
 	.get_cd = mmc_gpio_get_cd,
 	.get_ro = mmc_gpio_get_ro,
-	.init_card = omap_hsmmc_init_card,
 	.enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
 };
 
-- 
2.33.0

Re: [PATCH v2 0/6] mmc: core: extend mmc_fixup_device and transplant ti,wl1251 quirks from to be retired omap_hsmmc

[Ulf Hansson]

On Wed, 10 Nov 2021 at 18:17, H. Nikolaus Schaller <hns@goldelico.com> wrote:
>
> PATCH V2 2021-11-10 18:17:11:
> * remove setting card->ocr = 0x80 because it is no longer needed (by H. Nikolaus Schaller <hns@goldelico.com>)
> * include patch "mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO" by Ulf Hansson <ulf.hansson@linaro.org>
>
> PATCH V1 2021-11-09 11:59:08:
> * merge call of mmc_fixup_device for sdio into other commit (suggested by Ulf Hansson <ulf.hansson@linaro.org>)
> * do not call mmc_fixup_device(card, sdio_card_init_methods) for mmc and sd interfaces, just sdio (suggested by Ulf Hansson <ulf.hansson@linaro.org>)
> * do not use a matching list but a single string constant (suggested by Ulf Hansson <ulf.hansson@linaro.org>)
> * switched to "[PATCH v1]" (suggested by Ulf Hansson <ulf.hansson@linaro.org>)
>
> RFC V4 2021-11-05 10:05:51:
> * remove const from char *const * (Ulf Hansson <ulf.hansson@linaro.org>)
> * use for_each_child_of_node() to scan compatible children (Ulf Hansson <ulf.hansson@linaro.org>)
> (see: https://lore.kernel.org/lkml/CAPDyKFpr0kpRXoUACNNSwe8pL1S9wJPjnX+GFGS1PNezKCDYzQ@mail.gmail.com/)
>
> RFC V3 2021-11-03 14:00:13:
> * patches have been split into smaller ones a little further
> * propose a new macro for setup of device tree compatible quirks
> * directly include patches by jerome.pouiller@silabs.com
>   in this series
>
> RFC V2 2021-11-01 10:24:26:
> * reworked to not misuse mmc_select_card() but add a call to
>   mmc_fixup_device() right after where host->ops->init_card
>   was called before to apply the wl1251 specific quirks.
>   Device tree matching is done by a new table passed to mmc_fixup_device().
>   suggested by: ulf.hansson@linaro.org
>   based on patches by: jerome.pouiller@silabs.com
>
> RFC V1 2021-10-06 13:24:13:
>
>
> H. Nikolaus Schaller (3):
>   mmc: core: provide macro and table to match the device tree to apply
>     quirks
>   mmc: core: transplant ti,wl1251 quirks from to be retired omap_hsmmc
>   mmc: host: omap_hsmmc: revert special init for wl1251
>
> Jérôme Pouiller (2):
>   mmc: core: rewrite mmc_fixup_device()
>   mmc: core: allow to match the device tree to apply quirks
>
> Ulf Hansson (1):
>   mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO
>
>  drivers/mmc/core/card.h       | 36 ++++++++++++++++++++
>  drivers/mmc/core/quirks.h     | 64 +++++++++++++++++++++++++----------
>  drivers/mmc/core/sdio.c       |  5 ++-
>  drivers/mmc/host/omap_hsmmc.c | 36 --------------------
>  4 files changed, 87 insertions(+), 54 deletions(-)
>

This looks good to me, I will queue it up as soon as rc1 is out, thanks!

Kind regards
Uffe

Re: [PATCH v2 0/6] mmc: core: extend mmc_fixup_device and transplant ti,wl1251 quirks from to be retired omap_hsmmc

[H. Nikolaus Schaller]

> Am 11.11.2021 um 13:10 schrieb Ulf Hansson <ulf.hansson@linaro.org>:
> 
> On Wed, 10 Nov 2021 at 18:17, H. Nikolaus Schaller <hns@goldelico.com> wrote:
>> 
>> 
>> drivers/mmc/core/card.h       | 36 ++++++++++++++++++++
>> drivers/mmc/core/quirks.h     | 64 +++++++++++++++++++++++++----------
>> drivers/mmc/core/sdio.c       |  5 ++-
>> drivers/mmc/host/omap_hsmmc.c | 36 --------------------
>> 4 files changed, 87 insertions(+), 54 deletions(-)
>> 
> 
> This looks good to me, I will queue it up as soon as rc1 is out, thanks!

Thanks!

Best regards,
Nikolaus

Re: [PATCH v2 0/6] mmc: core: extend mmc_fixup_device and transplant ti,wl1251 quirks from to be retired omap_hsmmc

[Tony Lindgren]

* H. Nikolaus Schaller <hns@goldelico.com> [211111 13:51]:
> 
> 
> > Am 11.11.2021 um 13:10 schrieb Ulf Hansson <ulf.hansson@linaro.org>:
> > 
> > On Wed, 10 Nov 2021 at 18:17, H. Nikolaus Schaller <hns@goldelico.com> wrote:
> >> 
> >> 
> >> drivers/mmc/core/card.h       | 36 ++++++++++++++++++++
> >> drivers/mmc/core/quirks.h     | 64 +++++++++++++++++++++++++----------
> >> drivers/mmc/core/sdio.c       |  5 ++-
> >> drivers/mmc/host/omap_hsmmc.c | 36 --------------------
> >> 4 files changed, 87 insertions(+), 54 deletions(-)
> >> 
> > 
> > This looks good to me, I will queue it up as soon as rc1 is out, thanks!
> 
> Thanks!

Thanks for sorting this out!

Tony