All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4] qga: add command guest-get-devices for reporting VirtIO devices
@ 2019-09-25 21:03 Tomáš Golembiovský
  2019-09-25 21:18 ` Eric Blake
  2019-10-22  9:10 ` Tomáš Golembiovský
  0 siblings, 2 replies; 3+ messages in thread
From: Tomáš Golembiovský @ 2019-09-25 21:03 UTC (permalink / raw)
  To: qemu-devel
  Cc: Marc-André Lureau, Tomáš Golembiovský, Michael Roth

Add command for reporting devices on Windows guest. The intent is not so
much to report the devices but more importantly the driver (and its
version) that is assigned to the device. This gives caller the
information whether VirtIO drivers are installed and/or whether
inadequate driver is used on a device (e.g. QXL device with base VGA
driver).

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
---
 qga/commands-posix.c |   9 ++
 qga/commands-win32.c | 204 ++++++++++++++++++++++++++++++++++++++++++-
 qga/qapi-schema.json |  32 +++++++
 3 files changed, 244 insertions(+), 1 deletion(-)

diff --git a/qga/commands-posix.c b/qga/commands-posix.c
index dfc05f5b8a..58e93feef9 100644
--- a/qga/commands-posix.c
+++ b/qga/commands-posix.c
@@ -2757,6 +2757,8 @@ GList *ga_command_blacklist_init(GList *blacklist)
     blacklist = g_list_append(blacklist, g_strdup("guest-fstrim"));
 #endif
 
+    blacklist = g_list_append(blacklist, g_strdup("guest-get-devices"));
+
     return blacklist;
 }
 
@@ -2977,3 +2979,10 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)
 
     return info;
 }
+
+GuestDeviceInfoList *qmp_guest_get_devices(Error **errp)
+{
+    error_setg(errp, QERR_UNSUPPORTED);
+
+    return NULL;
+}
diff --git a/qga/commands-win32.c b/qga/commands-win32.c
index 6b67f16faf..ec07a5b3ef 100644
--- a/qga/commands-win32.c
+++ b/qga/commands-win32.c
@@ -21,10 +21,11 @@
 #ifdef CONFIG_QGA_NTDDSCSI
 #include <winioctl.h>
 #include <ntddscsi.h>
+#endif
 #include <setupapi.h>
 #include <cfgmgr32.h>
 #include <initguid.h>
-#endif
+#include <devpropdef.h>
 #include <lm.h>
 #include <wtsapi32.h>
 #include <wininet.h>
@@ -38,6 +39,36 @@
 #include "qemu/host-utils.h"
 #include "qemu/base64.h"
 
+/*
+ * The following should be in devpkey.h, but it isn't. The key names were
+ * prefixed to avoid (future) name clashes. Once the definitions get into
+ * mingw the following lines can be removed.
+ */
+DEFINE_DEVPROPKEY(qga_DEVPKEY_NAME, 0xb725f130, 0x47ef, 0x101a, 0xa5,
+    0xf1, 0x02, 0x60, 0x8c, 0x9e, 0xeb, 0xac, 10);
+    /* DEVPROP_TYPE_STRING */
+DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_HardwareIds, 0xa45c254e, 0xdf1c,
+    0x4efd, 0x80, 0x20, 0x67, 0xd1, 0x46, 0xa8, 0x50, 0xe0, 3);
+    /* DEVPROP_TYPE_STRING_LIST */
+DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_DriverDate, 0xa8b865dd, 0x2e3d,
+    0x4094, 0xad, 0x97, 0xe5, 0x93, 0xa7, 0xc, 0x75, 0xd6, 2);
+    /* DEVPROP_TYPE_FILETIME */
+DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_DriverVersion, 0xa8b865dd, 0x2e3d,
+    0x4094, 0xad, 0x97, 0xe5, 0x93, 0xa7, 0xc, 0x75, 0xd6, 3);
+    /* DEVPROP_TYPE_STRING */
+/* The following shoud be in cfgmgr32.h, but it isn't */
+#ifndef CM_Get_DevNode_Property
+CMAPI CONFIGRET WINAPI CM_Get_DevNode_PropertyW(
+    DEVINST          dnDevInst,
+    CONST DEVPROPKEY * PropertyKey,
+    DEVPROPTYPE      * PropertyType,
+    PBYTE            PropertyBuffer,
+    PULONG           PropertyBufferSize,
+    ULONG            ulFlags
+);
+#define CM_Get_DevNode_Property CM_Get_DevNode_PropertyW
+#endif
+
 #ifndef SHTDN_REASON_FLAG_PLANNED
 #define SHTDN_REASON_FLAG_PLANNED 0x80000000
 #endif
@@ -92,6 +123,8 @@ static OpenFlags guest_file_open_modes[] = {
     g_free(suffix); \
 } while (0)
 
+G_DEFINE_AUTOPTR_CLEANUP_FUNC(GuestDeviceInfo, qapi_free_GuestDeviceInfo)
+
 static OpenFlags *find_open_flag(const char *mode_str)
 {
     int mode;
@@ -2234,3 +2267,172 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)
 
     return info;
 }
+
+/*
+ * Safely get device property. Returned strings are using wide characters.
+ * Caller is responsible for freeing the buffer.
+ */
+static LPBYTE cm_get_property(DEVINST devInst, const DEVPROPKEY *propName,
+    PDEVPROPTYPE propType)
+{
+    CONFIGRET cr;
+    g_autofree LPBYTE buffer = NULL;
+    ULONG buffer_len = 0;
+
+    /* First query for needed space */
+    cr = CM_Get_DevNode_PropertyW(devInst, propName, propType,
+        buffer, &buffer_len, 0);
+    if (cr != CR_SUCCESS && cr != CR_BUFFER_SMALL) {
+
+        slog("failed to get property size, error=0x%lx", cr);
+        return NULL;
+    }
+    buffer = g_new0(BYTE, buffer_len + 1);
+    cr = CM_Get_DevNode_PropertyW(devInst, propName, propType,
+        buffer, &buffer_len, 0);
+    if (cr != CR_SUCCESS) {
+        slog("failed to get device property, error=0x%lx", cr);
+        return NULL;
+    }
+    return g_steal_pointer(&buffer);
+}
+
+static GStrv ga_get_hardware_ids(DEVINST devInstance)
+{
+    GStrv hw_ids = NULL;
+    GArray *values = NULL;
+    DEVPROPTYPE cm_type;
+    LPWSTR id;
+    g_autofree LPWSTR property = (LPWSTR)cm_get_property(devInstance,
+        &qga_DEVPKEY_Device_HardwareIds, &cm_type);
+    if (property == NULL) {
+        slog("failed to get hardware IDs");
+        return NULL;
+    }
+    if (*property == '\0') {
+        /* empty list */
+        return NULL;
+    }
+    values = g_array_new(TRUE, TRUE, sizeof(gchar *));
+    for (id = property; '\0' != *id; id += lstrlenW(id) + 1) {
+        gchar *id8 = g_utf16_to_utf8(id, -1, NULL, NULL, NULL);
+        g_array_append_val(values, id8);
+    }
+    hw_ids = (GStrv)g_array_free(values, FALSE);
+    values = NULL;
+    return hw_ids;
+}
+
+/*
+ * https://docs.microsoft.com/en-us/windows-hardware/drivers/install/identifiers-for-pci-devices
+ */
+#define DEVICE_PCI_RE "PCI\\\\VEN_(1AF4|1B36)&DEV_([0-9A-B]{4})(&|$)"
+
+GuestDeviceInfoList *qmp_guest_get_devices(Error **errp)
+{
+    GuestDeviceInfoList *head = NULL, *cur_item = NULL, *item = NULL;
+    HDEVINFO dev_info = INVALID_HANDLE_VALUE;
+    SP_DEVINFO_DATA dev_info_data;
+    int i, j;
+    GError *gerr = NULL;
+    g_autoptr(GRegex) device_pci_re = NULL;
+    DEVPROPTYPE cm_type;
+
+    device_pci_re = g_regex_new(DEVICE_PCI_RE,
+        G_REGEX_ANCHORED | G_REGEX_OPTIMIZE, 0,
+        &gerr);
+    g_assert(device_pci_re != NULL);
+
+    dev_info_data.cbSize = sizeof(SP_DEVINFO_DATA);
+    dev_info = SetupDiGetClassDevs(0, 0, 0, DIGCF_PRESENT | DIGCF_ALLCLASSES);
+    if (dev_info == INVALID_HANDLE_VALUE) {
+        error_setg(errp, "failed to get device tree");
+        return NULL;
+    }
+
+    slog("enumerating devices");
+    for (i = 0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) {
+        bool skip = true;
+        SYSTEMTIME utc_date;
+        g_autofree LPWSTR name = NULL;
+        g_autofree LPFILETIME date = NULL;
+        g_autofree LPWSTR version = NULL;
+        g_auto(GStrv) hw_ids = NULL;
+        g_autoptr(GuestDeviceInfo) device = g_new0(GuestDeviceInfo, 1);
+        g_autofree char *vendor_id = NULL;
+        g_autofree char *device_id = NULL;
+
+        name = (LPWSTR)cm_get_property(dev_info_data.DevInst,
+            &qga_DEVPKEY_NAME, &cm_type);
+        if (name == NULL) {
+            slog("failed to get device description");
+            continue;
+        }
+        device->driver_name = g_utf16_to_utf8(name, -1, NULL, NULL, NULL);
+        if (device->driver_name == NULL) {
+            error_setg(errp, "conversion to utf8 failed (driver name)");
+            goto out;
+        }
+        slog("querying device: %s", device->driver_name);
+        hw_ids = ga_get_hardware_ids(dev_info_data.DevInst);
+        if (hw_ids == NULL) {
+            continue;
+        }
+        for (j = 0; hw_ids[j] != NULL; j++) {
+            GMatchInfo *match_info;
+            if (!g_regex_match(device_pci_re, hw_ids[j], 0, &match_info)) {
+                continue;
+            }
+            skip = false;
+            vendor_id = g_match_info_fetch(match_info, 1);
+            device_id = g_match_info_fetch(match_info, 2);
+            device->vendor_id = g_ascii_strtoull(vendor_id, NULL, 16);
+            device->device_id = g_ascii_strtoull(device_id, NULL, 16);
+            g_match_info_free(match_info);
+        }
+        if (skip) {
+            continue;
+        }
+
+        version = (LPWSTR)cm_get_property(dev_info_data.DevInst,
+            &qga_DEVPKEY_Device_DriverVersion, &cm_type);
+        if (version == NULL) {
+            slog("failed to get driver version");
+            continue;
+        }
+        device->driver_version = g_utf16_to_utf8(version, -1, NULL,
+            NULL, NULL);
+        if (device->driver_version == NULL) {
+            error_setg(errp, "conversion to utf8 failed (driver version)");
+            goto out;
+        }
+
+        date = (LPFILETIME)cm_get_property(dev_info_data.DevInst,
+            &qga_DEVPKEY_Device_DriverDate, &cm_type);
+        if (date == NULL) {
+            slog("failed to get driver date");
+            continue;
+        }
+        FileTimeToSystemTime(date, &utc_date);
+        device->driver_date = g_strdup_printf("%04d-%02d-%02d",
+            utc_date.wYear, utc_date.wMonth, utc_date.wDay);
+
+        slog("driver: %s\ndriver version: %s,%s\n", device->driver_name,
+            device->driver_date, device->driver_version);
+        item = g_new0(GuestDeviceInfoList, 1);
+        item->value = g_steal_pointer(&device);
+        if (!cur_item) {
+            head = cur_item = item;
+        } else {
+            cur_item->next = item;
+            cur_item = item;
+        }
+        continue;
+    }
+
+out:
+    if (dev_info != INVALID_HANDLE_VALUE) {
+        SetupDiDestroyDeviceInfoList(dev_info);
+    }
+    return head;
+}
diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index fb4605cc19..fe04ff2f39 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -1242,3 +1242,35 @@
 ##
 { 'command': 'guest-get-osinfo',
   'returns': 'GuestOSInfo' }
+
+##
+# @GuestDeviceInfo:
+#
+# @vendor-id: vendor ID
+# @device-id: device ID
+# @driver-name: name of the associated driver
+# @driver-date: driver release date in format YYYY-MM-DD
+# @driver-version: driver version
+#
+# Since: 4.2
+##
+{ 'struct': 'GuestDeviceInfo',
+  'data': {
+      'vendor-id': 'uint16',
+      'device-id': 'uint16',
+      'driver-name': 'str',
+      'driver-date': 'str',
+      'driver-version': 'str'
+      } }
+
+##
+# @guest-get-devices:
+#
+# Retrieve information about device drivers in Windows guest
+#
+# Returns: @GuestDeviceInfo
+#
+# Since: 4.2
+##
+{ 'command': 'guest-get-devices',
+  'returns': ['GuestDeviceInfo'] }
-- 
2.23.0



^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v4] qga: add command guest-get-devices for reporting VirtIO devices
  2019-09-25 21:03 [PATCH v4] qga: add command guest-get-devices for reporting VirtIO devices Tomáš Golembiovský
@ 2019-09-25 21:18 ` Eric Blake
  2019-10-22  9:10 ` Tomáš Golembiovský
  1 sibling, 0 replies; 3+ messages in thread
From: Eric Blake @ 2019-09-25 21:18 UTC (permalink / raw)
  To: Tomáš Golembiovský, qemu-devel
  Cc: Marc-André Lureau, Michael Roth

On 9/25/19 4:03 PM, Tomáš Golembiovský wrote:
> Add command for reporting devices on Windows guest. The intent is not so
> much to report the devices but more importantly the driver (and its
> version) that is assigned to the device. This gives caller the
> information whether VirtIO drivers are installed and/or whether
> inadequate driver is used on a device (e.g. QXL device with base VGA
> driver).
> 
> Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
> ---

It's nice to mention here, after the --- separator, how v4 differs from 
earlier versions, to let reviewers that saw the earlier version check 
the differences.


> +++ b/qga/qapi-schema.json
> @@ -1242,3 +1242,35 @@
>   ##
>   { 'command': 'guest-get-osinfo',
>     'returns': 'GuestOSInfo' }
> +
> +##
> +# @GuestDeviceInfo:
> +#
> +# @vendor-id: vendor ID
> +# @device-id: device ID
> +# @driver-name: name of the associated driver
> +# @driver-date: driver release date in format YYYY-MM-DD
> +# @driver-version: driver version
> +#
> +# Since: 4.2
> +##
> +{ 'struct': 'GuestDeviceInfo',
> +  'data': {
> +      'vendor-id': 'uint16',
> +      'device-id': 'uint16',
> +      'driver-name': 'str',
> +      'driver-date': 'str',
> +      'driver-version': 'str'
> +      } }
> +
> +##
> +# @guest-get-devices:
> +#
> +# Retrieve information about device drivers in Windows guest
> +#
> +# Returns: @GuestDeviceInfo
> +#
> +# Since: 4.2
> +##
> +{ 'command': 'guest-get-devices',
> +  'returns': ['GuestDeviceInfo'] }
> 


I'm not spotting any obvious problems with the interface itself, but am 
not comfortable enough with the rest of the code for a full review.

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v4] qga: add command guest-get-devices for reporting VirtIO devices
  2019-09-25 21:03 [PATCH v4] qga: add command guest-get-devices for reporting VirtIO devices Tomáš Golembiovský
  2019-09-25 21:18 ` Eric Blake
@ 2019-10-22  9:10 ` Tomáš Golembiovský
  1 sibling, 0 replies; 3+ messages in thread
From: Tomáš Golembiovský @ 2019-10-22  9:10 UTC (permalink / raw)
  To: Michael Roth; +Cc: Marc-André Lureau, qemu-devel

Ping, Michael, would be nice if we could get this in 4.2.

    Tomas

On Wed, Sep 25, 2019 at 11:03:58PM +0200, Tomáš Golembiovský wrote:
> Add command for reporting devices on Windows guest. The intent is not so
> much to report the devices but more importantly the driver (and its
> version) that is assigned to the device. This gives caller the
> information whether VirtIO drivers are installed and/or whether
> inadequate driver is used on a device (e.g. QXL device with base VGA
> driver).
> 
> Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
> ---
>  qga/commands-posix.c |   9 ++
>  qga/commands-win32.c | 204 ++++++++++++++++++++++++++++++++++++++++++-
>  qga/qapi-schema.json |  32 +++++++
>  3 files changed, 244 insertions(+), 1 deletion(-)
> 
> diff --git a/qga/commands-posix.c b/qga/commands-posix.c
> index dfc05f5b8a..58e93feef9 100644
> --- a/qga/commands-posix.c
> +++ b/qga/commands-posix.c
> @@ -2757,6 +2757,8 @@ GList *ga_command_blacklist_init(GList *blacklist)
>      blacklist = g_list_append(blacklist, g_strdup("guest-fstrim"));
>  #endif
>  
> +    blacklist = g_list_append(blacklist, g_strdup("guest-get-devices"));
> +
>      return blacklist;
>  }
>  
> @@ -2977,3 +2979,10 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)
>  
>      return info;
>  }
> +
> +GuestDeviceInfoList *qmp_guest_get_devices(Error **errp)
> +{
> +    error_setg(errp, QERR_UNSUPPORTED);
> +
> +    return NULL;
> +}
> diff --git a/qga/commands-win32.c b/qga/commands-win32.c
> index 6b67f16faf..ec07a5b3ef 100644
> --- a/qga/commands-win32.c
> +++ b/qga/commands-win32.c
> @@ -21,10 +21,11 @@
>  #ifdef CONFIG_QGA_NTDDSCSI
>  #include <winioctl.h>
>  #include <ntddscsi.h>
> +#endif
>  #include <setupapi.h>
>  #include <cfgmgr32.h>
>  #include <initguid.h>
> -#endif
> +#include <devpropdef.h>
>  #include <lm.h>
>  #include <wtsapi32.h>
>  #include <wininet.h>
> @@ -38,6 +39,36 @@
>  #include "qemu/host-utils.h"
>  #include "qemu/base64.h"
>  
> +/*
> + * The following should be in devpkey.h, but it isn't. The key names were
> + * prefixed to avoid (future) name clashes. Once the definitions get into
> + * mingw the following lines can be removed.
> + */
> +DEFINE_DEVPROPKEY(qga_DEVPKEY_NAME, 0xb725f130, 0x47ef, 0x101a, 0xa5,
> +    0xf1, 0x02, 0x60, 0x8c, 0x9e, 0xeb, 0xac, 10);
> +    /* DEVPROP_TYPE_STRING */
> +DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_HardwareIds, 0xa45c254e, 0xdf1c,
> +    0x4efd, 0x80, 0x20, 0x67, 0xd1, 0x46, 0xa8, 0x50, 0xe0, 3);
> +    /* DEVPROP_TYPE_STRING_LIST */
> +DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_DriverDate, 0xa8b865dd, 0x2e3d,
> +    0x4094, 0xad, 0x97, 0xe5, 0x93, 0xa7, 0xc, 0x75, 0xd6, 2);
> +    /* DEVPROP_TYPE_FILETIME */
> +DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_DriverVersion, 0xa8b865dd, 0x2e3d,
> +    0x4094, 0xad, 0x97, 0xe5, 0x93, 0xa7, 0xc, 0x75, 0xd6, 3);
> +    /* DEVPROP_TYPE_STRING */
> +/* The following shoud be in cfgmgr32.h, but it isn't */
> +#ifndef CM_Get_DevNode_Property
> +CMAPI CONFIGRET WINAPI CM_Get_DevNode_PropertyW(
> +    DEVINST          dnDevInst,
> +    CONST DEVPROPKEY * PropertyKey,
> +    DEVPROPTYPE      * PropertyType,
> +    PBYTE            PropertyBuffer,
> +    PULONG           PropertyBufferSize,
> +    ULONG            ulFlags
> +);
> +#define CM_Get_DevNode_Property CM_Get_DevNode_PropertyW
> +#endif
> +
>  #ifndef SHTDN_REASON_FLAG_PLANNED
>  #define SHTDN_REASON_FLAG_PLANNED 0x80000000
>  #endif
> @@ -92,6 +123,8 @@ static OpenFlags guest_file_open_modes[] = {
>      g_free(suffix); \
>  } while (0)
>  
> +G_DEFINE_AUTOPTR_CLEANUP_FUNC(GuestDeviceInfo, qapi_free_GuestDeviceInfo)
> +
>  static OpenFlags *find_open_flag(const char *mode_str)
>  {
>      int mode;
> @@ -2234,3 +2267,172 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)
>  
>      return info;
>  }
> +
> +/*
> + * Safely get device property. Returned strings are using wide characters.
> + * Caller is responsible for freeing the buffer.
> + */
> +static LPBYTE cm_get_property(DEVINST devInst, const DEVPROPKEY *propName,
> +    PDEVPROPTYPE propType)
> +{
> +    CONFIGRET cr;
> +    g_autofree LPBYTE buffer = NULL;
> +    ULONG buffer_len = 0;
> +
> +    /* First query for needed space */
> +    cr = CM_Get_DevNode_PropertyW(devInst, propName, propType,
> +        buffer, &buffer_len, 0);
> +    if (cr != CR_SUCCESS && cr != CR_BUFFER_SMALL) {
> +
> +        slog("failed to get property size, error=0x%lx", cr);
> +        return NULL;
> +    }
> +    buffer = g_new0(BYTE, buffer_len + 1);
> +    cr = CM_Get_DevNode_PropertyW(devInst, propName, propType,
> +        buffer, &buffer_len, 0);
> +    if (cr != CR_SUCCESS) {
> +        slog("failed to get device property, error=0x%lx", cr);
> +        return NULL;
> +    }
> +    return g_steal_pointer(&buffer);
> +}
> +
> +static GStrv ga_get_hardware_ids(DEVINST devInstance)
> +{
> +    GStrv hw_ids = NULL;
> +    GArray *values = NULL;
> +    DEVPROPTYPE cm_type;
> +    LPWSTR id;
> +    g_autofree LPWSTR property = (LPWSTR)cm_get_property(devInstance,
> +        &qga_DEVPKEY_Device_HardwareIds, &cm_type);
> +    if (property == NULL) {
> +        slog("failed to get hardware IDs");
> +        return NULL;
> +    }
> +    if (*property == '\0') {
> +        /* empty list */
> +        return NULL;
> +    }
> +    values = g_array_new(TRUE, TRUE, sizeof(gchar *));
> +    for (id = property; '\0' != *id; id += lstrlenW(id) + 1) {
> +        gchar *id8 = g_utf16_to_utf8(id, -1, NULL, NULL, NULL);
> +        g_array_append_val(values, id8);
> +    }
> +    hw_ids = (GStrv)g_array_free(values, FALSE);
> +    values = NULL;
> +    return hw_ids;
> +}
> +
> +/*
> + * https://docs.microsoft.com/en-us/windows-hardware/drivers/install/identifiers-for-pci-devices
> + */
> +#define DEVICE_PCI_RE "PCI\\\\VEN_(1AF4|1B36)&DEV_([0-9A-B]{4})(&|$)"
> +
> +GuestDeviceInfoList *qmp_guest_get_devices(Error **errp)
> +{
> +    GuestDeviceInfoList *head = NULL, *cur_item = NULL, *item = NULL;
> +    HDEVINFO dev_info = INVALID_HANDLE_VALUE;
> +    SP_DEVINFO_DATA dev_info_data;
> +    int i, j;
> +    GError *gerr = NULL;
> +    g_autoptr(GRegex) device_pci_re = NULL;
> +    DEVPROPTYPE cm_type;
> +
> +    device_pci_re = g_regex_new(DEVICE_PCI_RE,
> +        G_REGEX_ANCHORED | G_REGEX_OPTIMIZE, 0,
> +        &gerr);
> +    g_assert(device_pci_re != NULL);
> +
> +    dev_info_data.cbSize = sizeof(SP_DEVINFO_DATA);
> +    dev_info = SetupDiGetClassDevs(0, 0, 0, DIGCF_PRESENT | DIGCF_ALLCLASSES);
> +    if (dev_info == INVALID_HANDLE_VALUE) {
> +        error_setg(errp, "failed to get device tree");
> +        return NULL;
> +    }
> +
> +    slog("enumerating devices");
> +    for (i = 0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) {
> +        bool skip = true;
> +        SYSTEMTIME utc_date;
> +        g_autofree LPWSTR name = NULL;
> +        g_autofree LPFILETIME date = NULL;
> +        g_autofree LPWSTR version = NULL;
> +        g_auto(GStrv) hw_ids = NULL;
> +        g_autoptr(GuestDeviceInfo) device = g_new0(GuestDeviceInfo, 1);
> +        g_autofree char *vendor_id = NULL;
> +        g_autofree char *device_id = NULL;
> +
> +        name = (LPWSTR)cm_get_property(dev_info_data.DevInst,
> +            &qga_DEVPKEY_NAME, &cm_type);
> +        if (name == NULL) {
> +            slog("failed to get device description");
> +            continue;
> +        }
> +        device->driver_name = g_utf16_to_utf8(name, -1, NULL, NULL, NULL);
> +        if (device->driver_name == NULL) {
> +            error_setg(errp, "conversion to utf8 failed (driver name)");
> +            goto out;
> +        }
> +        slog("querying device: %s", device->driver_name);
> +        hw_ids = ga_get_hardware_ids(dev_info_data.DevInst);
> +        if (hw_ids == NULL) {
> +            continue;
> +        }
> +        for (j = 0; hw_ids[j] != NULL; j++) {
> +            GMatchInfo *match_info;
> +            if (!g_regex_match(device_pci_re, hw_ids[j], 0, &match_info)) {
> +                continue;
> +            }
> +            skip = false;
> +            vendor_id = g_match_info_fetch(match_info, 1);
> +            device_id = g_match_info_fetch(match_info, 2);
> +            device->vendor_id = g_ascii_strtoull(vendor_id, NULL, 16);
> +            device->device_id = g_ascii_strtoull(device_id, NULL, 16);
> +            g_match_info_free(match_info);
> +        }
> +        if (skip) {
> +            continue;
> +        }
> +
> +        version = (LPWSTR)cm_get_property(dev_info_data.DevInst,
> +            &qga_DEVPKEY_Device_DriverVersion, &cm_type);
> +        if (version == NULL) {
> +            slog("failed to get driver version");
> +            continue;
> +        }
> +        device->driver_version = g_utf16_to_utf8(version, -1, NULL,
> +            NULL, NULL);
> +        if (device->driver_version == NULL) {
> +            error_setg(errp, "conversion to utf8 failed (driver version)");
> +            goto out;
> +        }
> +
> +        date = (LPFILETIME)cm_get_property(dev_info_data.DevInst,
> +            &qga_DEVPKEY_Device_DriverDate, &cm_type);
> +        if (date == NULL) {
> +            slog("failed to get driver date");
> +            continue;
> +        }
> +        FileTimeToSystemTime(date, &utc_date);
> +        device->driver_date = g_strdup_printf("%04d-%02d-%02d",
> +            utc_date.wYear, utc_date.wMonth, utc_date.wDay);
> +
> +        slog("driver: %s\ndriver version: %s,%s\n", device->driver_name,
> +            device->driver_date, device->driver_version);
> +        item = g_new0(GuestDeviceInfoList, 1);
> +        item->value = g_steal_pointer(&device);
> +        if (!cur_item) {
> +            head = cur_item = item;
> +        } else {
> +            cur_item->next = item;
> +            cur_item = item;
> +        }
> +        continue;
> +    }
> +
> +out:
> +    if (dev_info != INVALID_HANDLE_VALUE) {
> +        SetupDiDestroyDeviceInfoList(dev_info);
> +    }
> +    return head;
> +}
> diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
> index fb4605cc19..fe04ff2f39 100644
> --- a/qga/qapi-schema.json
> +++ b/qga/qapi-schema.json
> @@ -1242,3 +1242,35 @@
>  ##
>  { 'command': 'guest-get-osinfo',
>    'returns': 'GuestOSInfo' }
> +
> +##
> +# @GuestDeviceInfo:
> +#
> +# @vendor-id: vendor ID
> +# @device-id: device ID
> +# @driver-name: name of the associated driver
> +# @driver-date: driver release date in format YYYY-MM-DD
> +# @driver-version: driver version
> +#
> +# Since: 4.2
> +##
> +{ 'struct': 'GuestDeviceInfo',
> +  'data': {
> +      'vendor-id': 'uint16',
> +      'device-id': 'uint16',
> +      'driver-name': 'str',
> +      'driver-date': 'str',
> +      'driver-version': 'str'
> +      } }
> +
> +##
> +# @guest-get-devices:
> +#
> +# Retrieve information about device drivers in Windows guest
> +#
> +# Returns: @GuestDeviceInfo
> +#
> +# Since: 4.2
> +##
> +{ 'command': 'guest-get-devices',
> +  'returns': ['GuestDeviceInfo'] }
> -- 
> 2.23.0
> 

-- 
Tomáš Golembiovský <tgolembi@redhat.com>


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-10-22  9:11 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-25 21:03 [PATCH v4] qga: add command guest-get-devices for reporting VirtIO devices Tomáš Golembiovský
2019-09-25 21:18 ` Eric Blake
2019-10-22  9:10 ` Tomáš Golembiovský

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.