From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will@kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, robh+dt@kernel.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.com, phil@raspberrypi.com Subject: Re: [PATCH v3 0/5] Expose RPi4's bootloader configuration Date: Mon, 18 Jan 2021 16:50:20 +0000 [thread overview] Message-ID: <e8ca9365-a1f2-1f9d-377c-13bf97883cce@linaro.org> (raw) In-Reply-To: <20210112142342.7290-1-nsaenzjulienne@suse.de> On 12/01/2021 14:23, Nicolas Saenz Julienne wrote: > Soon to be released versions of RPi4's firmware will take of care > passing their bootloader's configuration[1] to the OS by copying it into > memory and creating a reserved memory node in the board's DT. By > modeling this reserved memory node as an nvmem device using > 'nvmem-rmem', which this series introduces, user-space applications will > be able to query this information through nvmem's sysfs interface. > > An alternative approach, less nice IMO, would be to create a > platform-specific 'soc' driver. > > Regards, > Nicolas > > [1] https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md > > --- > > Changes since v2: > - Fix DT bingins > > Changes since v1: > - Avoid the reserved-memory indirection by integrating the nvmem driver > into the reserved memory node. > > Nicolas Saenz Julienne (5): > dt-bindings: nvmem: Add bindings for rmem driver > nvmem: Add driver to expose reserved memory as nvmem > ARM: dts: bcm2711: Add reserved memory template to hold firmware > configuration > arm64: defconfig: Enable nvmem's rmem driver > ARM: multi_v7_defconfig: Enable nvmem's rmem driver > Thanks Applied (1/5) and (2/5), rest of patches should go via arm-soc tree! --srini > .../devicetree/bindings/nvmem/rmem.yaml | 49 ++++++++++ > arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 17 ++++ > arch/arm/configs/multi_v7_defconfig | 1 + > arch/arm64/configs/defconfig | 1 + > drivers/nvmem/Kconfig | 8 ++ > drivers/nvmem/Makefile | 2 + > drivers/nvmem/rmem.c | 97 +++++++++++++++++++ > drivers/of/platform.c | 1 + > 8 files changed, 176 insertions(+) > create mode 100644 Documentation/devicetree/bindings/nvmem/rmem.yaml > create mode 100644 drivers/nvmem/rmem.c >
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org, tim.gover@raspberrypi.com, catalin.marinas@arm.com, linux@armlinux.org.uk, robh+dt@kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-rpi-kernel@lists.infradead.org, will@kernel.org, phil@raspberrypi.com, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v3 0/5] Expose RPi4's bootloader configuration Date: Mon, 18 Jan 2021 16:50:20 +0000 [thread overview] Message-ID: <e8ca9365-a1f2-1f9d-377c-13bf97883cce@linaro.org> (raw) In-Reply-To: <20210112142342.7290-1-nsaenzjulienne@suse.de> On 12/01/2021 14:23, Nicolas Saenz Julienne wrote: > Soon to be released versions of RPi4's firmware will take of care > passing their bootloader's configuration[1] to the OS by copying it into > memory and creating a reserved memory node in the board's DT. By > modeling this reserved memory node as an nvmem device using > 'nvmem-rmem', which this series introduces, user-space applications will > be able to query this information through nvmem's sysfs interface. > > An alternative approach, less nice IMO, would be to create a > platform-specific 'soc' driver. > > Regards, > Nicolas > > [1] https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md > > --- > > Changes since v2: > - Fix DT bingins > > Changes since v1: > - Avoid the reserved-memory indirection by integrating the nvmem driver > into the reserved memory node. > > Nicolas Saenz Julienne (5): > dt-bindings: nvmem: Add bindings for rmem driver > nvmem: Add driver to expose reserved memory as nvmem > ARM: dts: bcm2711: Add reserved memory template to hold firmware > configuration > arm64: defconfig: Enable nvmem's rmem driver > ARM: multi_v7_defconfig: Enable nvmem's rmem driver > Thanks Applied (1/5) and (2/5), rest of patches should go via arm-soc tree! --srini > .../devicetree/bindings/nvmem/rmem.yaml | 49 ++++++++++ > arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 17 ++++ > arch/arm/configs/multi_v7_defconfig | 1 + > arch/arm64/configs/defconfig | 1 + > drivers/nvmem/Kconfig | 8 ++ > drivers/nvmem/Makefile | 2 + > drivers/nvmem/rmem.c | 97 +++++++++++++++++++ > drivers/of/platform.c | 1 + > 8 files changed, 176 insertions(+) > create mode 100644 Documentation/devicetree/bindings/nvmem/rmem.yaml > create mode 100644 drivers/nvmem/rmem.c > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-18 16:51 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-12 14:23 [PATCH v3 0/5] Expose RPi4's bootloader configuration Nicolas Saenz Julienne 2021-01-12 14:23 ` Nicolas Saenz Julienne 2021-01-12 14:23 ` [PATCH v3 1/5] dt-bindings: nvmem: Add bindings for rmem driver Nicolas Saenz Julienne 2021-01-12 14:23 ` Nicolas Saenz Julienne 2021-01-14 20:17 ` Rob Herring 2021-01-14 20:17 ` Rob Herring 2021-01-12 14:23 ` [PATCH v3 2/5] nvmem: Add driver to expose reserved memory as nvmem Nicolas Saenz Julienne 2021-01-12 14:23 ` Nicolas Saenz Julienne 2021-01-12 14:23 ` [PATCH v3 3/5] ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration Nicolas Saenz Julienne 2021-01-12 14:23 ` Nicolas Saenz Julienne 2021-01-12 14:23 ` [PATCH v3 4/5] arm64: defconfig: Enable nvmem's rmem driver Nicolas Saenz Julienne 2021-01-12 14:23 ` Nicolas Saenz Julienne 2021-01-12 14:23 ` [PATCH v3 5/5] ARM: multi_v7_defconfig: " Nicolas Saenz Julienne 2021-01-12 14:23 ` Nicolas Saenz Julienne 2021-01-18 16:50 ` Srinivas Kandagatla [this message] 2021-01-18 16:50 ` [PATCH v3 0/5] Expose RPi4's bootloader configuration Srinivas Kandagatla 2021-01-25 21:04 ` Nicolas Saenz Julienne 2021-01-25 21:04 ` Nicolas Saenz Julienne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=e8ca9365-a1f2-1f9d-377c-13bf97883cce@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=linux@armlinux.org.uk \ --cc=nsaenzjulienne@suse.de \ --cc=phil@raspberrypi.com \ --cc=robh+dt@kernel.org \ --cc=tim.gover@raspberrypi.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.