* Boot failure triggered by USB on rockpro64-rk3399 and pinebook-pro-rk3399
@ 2021-01-21 0:08 Vagrant Cascadian
2021-01-21 3:37 ` Kever Yang
0 siblings, 1 reply; 4+ messages in thread
From: Vagrant Cascadian @ 2021-01-21 0:08 UTC (permalink / raw)
To: u-boot
It seems rockpro64-rk3399 and pinebook-pro-rk3399 fail to boot when usb
is started. It hangs indefinitely at:
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
I have observed this also using 2020.10 on rockpro64-rk3399, though on
pinebook-pro-rk3399 usb does not work and so it basically avoids
triggering the issue.
Setting CONFIG_USE_PREBOOT=n in the config works around the problem,
though obviously by breaking usb keyboard support or booting from USB
devices.
Related bugs in Debian and manjaro:
https://bugs.debian.org/973323
https://bugs.debian.org/980434
https://gitlab.manjaro.org/manjaro-arm/packages/core/uboot-rockpro64/-/issues/4
Boot log:
U-Boot 2021.01+dfsg-1 (Jan 17 2021 - 03:50:13 +0000)
SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 RockPro64 v2.1
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Pine64 RockPro64 v2.1
Net: eth0: ethernet at fe300000
starting USB...
Bus usb at fe380000: USB EHCI 1.00
Bus usb at fe3a0000: USB OHCI 1.0
Bus usb at fe3c0000: USB EHCI 1.00
Bus usb at fe3e0000: USB OHCI 1.0
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb at fe380000 for devices... 1 USB Device(s) found
scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
=> printenv preboot
preboot=usb start
=> usb reset
resetting USB...
Bus usb at fe380000: USB EHCI 1.00
Bus usb at fe3a0000: USB OHCI 1.0
Bus usb at fe3c0000: USB EHCI 1.00
Bus usb at fe3e0000: USB OHCI 1.0
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb at fe380000 for devices... 1 USB Device(s) found
scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
=> boot
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
144 bytes read in 5 ms (27.3 KiB/s)
1: Debian-Installer
Retrieving file: /initrd.gz
28995285 bytes read in 1287 ms (21.5 MiB/s)
Retrieving file: /vmlinuz
26922864 bytes read in 1195 ms (21.5 MiB/s)
Retrieving file: /dtbs/rockchip/rk3399-rockpro64.dtb
56849 bytes read in 13 ms (4.2 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=3c50000
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
live well,
vagrant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210120/d5898991/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Boot failure triggered by USB on rockpro64-rk3399 and pinebook-pro-rk3399
2021-01-21 0:08 Boot failure triggered by USB on rockpro64-rk3399 and pinebook-pro-rk3399 Vagrant Cascadian
@ 2021-01-21 3:37 ` Kever Yang
2021-01-21 9:12 ` Alper Nebi Yasak
2021-01-22 1:31 ` Jonathan Gray
0 siblings, 2 replies; 4+ messages in thread
From: Kever Yang @ 2021-01-21 3:37 UTC (permalink / raw)
To: u-boot
Hi Vagrant,
??? Do you know which version is the last version that works in this case?
??? The firmware is from eMMC and it's wired for USB to affect the boot
process.
Thanks,
- Kever
On 2021/1/21 ??8:08, Vagrant Cascadian wrote:
> It seems rockpro64-rk3399 and pinebook-pro-rk3399 fail to boot when usb
> is started. It hangs indefinitely at:
>
> ## Flattened Device Tree blob at 01f00000
> Booting using the fdt blob at 0x1f00000
>
> I have observed this also using 2020.10 on rockpro64-rk3399, though on
> pinebook-pro-rk3399 usb does not work and so it basically avoids
> triggering the issue.
>
> Setting CONFIG_USE_PREBOOT=n in the config works around the problem,
> though obviously by breaking usb keyboard support or booting from USB
> devices.
>
>
> Related bugs in Debian and manjaro:
>
> https://bugs.debian.org/973323
> https://bugs.debian.org/980434
> https://gitlab.manjaro.org/manjaro-arm/packages/core/uboot-rockpro64/-/issues/4
>
>
> Boot log:
>
> U-Boot 2021.01+dfsg-1 (Jan 17 2021 - 03:50:13 +0000)
>
> SoC: Rockchip rk3399
> Reset cause: POR
> Model: Pine64 RockPro64 v2.1
> DRAM: 3.9 GiB
> PMIC: RK808
> MMC: mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
> Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Model: Pine64 RockPro64 v2.1
> Net: eth0: ethernet at fe300000
> starting USB...
> Bus usb at fe380000: USB EHCI 1.00
> Bus usb at fe3a0000: USB OHCI 1.0
> Bus usb at fe3c0000: USB EHCI 1.00
> Bus usb at fe3e0000: USB OHCI 1.0
> Bus dwc3: usb maximum-speed not found
> Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.10
> scanning bus usb at fe380000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
> scanning bus dwc3 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> => printenv preboot
> preboot=usb start
> => usb reset
> resetting USB...
> Bus usb at fe380000: USB EHCI 1.00
> Bus usb at fe3a0000: USB OHCI 1.0
> Bus usb at fe3c0000: USB EHCI 1.00
> Bus usb at fe3e0000: USB OHCI 1.0
> Bus dwc3: usb maximum-speed not found
> Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.10
> scanning bus usb at fe380000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
> scanning bus dwc3 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> => boot
> Card did not respond to voltage select! : -110
> switch to partitions #0, OK
> mmc1 is current device
> Scanning mmc 1:1...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 144 bytes read in 5 ms (27.3 KiB/s)
> 1: Debian-Installer
> Retrieving file: /initrd.gz
> 28995285 bytes read in 1287 ms (21.5 MiB/s)
> Retrieving file: /vmlinuz
> 26922864 bytes read in 1195 ms (21.5 MiB/s)
> Retrieving file: /dtbs/rockchip/rk3399-rockpro64.dtb
> 56849 bytes read in 13 ms (4.2 MiB/s)
> Moving Image from 0x2080000 to 0x2200000, end=3c50000
> ## Flattened Device Tree blob at 01f00000
> Booting using the fdt blob at 0x1f00000
>
>
>
> live well,
> vagrant
^ permalink raw reply [flat|nested] 4+ messages in thread
* Boot failure triggered by USB on rockpro64-rk3399 and pinebook-pro-rk3399
2021-01-21 3:37 ` Kever Yang
@ 2021-01-21 9:12 ` Alper Nebi Yasak
2021-01-22 1:31 ` Jonathan Gray
1 sibling, 0 replies; 4+ messages in thread
From: Alper Nebi Yasak @ 2021-01-21 9:12 UTC (permalink / raw)
To: u-boot
On 21/01/2021 03:08, Vagrant Cascadian wrote:
> It seems rockpro64-rk3399 and pinebook-pro-rk3399 fail to boot when usb
> is started. It hangs indefinitely at:
>
> ## Flattened Device Tree blob at 01f00000
> Booting using the fdt blob at 0x1f00000
>
> I have observed this also using 2020.10 on rockpro64-rk3399, though on
> pinebook-pro-rk3399 usb does not work and so it basically avoids
> triggering the issue.
>
> Setting CONFIG_USE_PREBOOT=n in the config works around the problem,
> though obviously by breaking usb keyboard support or booting from USB
> devices.
This might be the same as [1] where running "usb stop" would hang, but
disabling CONFIG_USB_OHCI_HCD and CONFIG_USB_OHCI_GENERIC gets the board
to boot (still breaks the keyboard). Might help narrow things down.
[1] https://lists.denx.de/pipermail/u-boot/2020-November/432931.html
On 21/01/2021 06:37, Kever Yang wrote:
> ??? Do you know which version is the last version that works in this case?
The email I linked above has some versions they've tested, in case this
is the same issue.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Boot failure triggered by USB on rockpro64-rk3399 and pinebook-pro-rk3399
2021-01-21 3:37 ` Kever Yang
2021-01-21 9:12 ` Alper Nebi Yasak
@ 2021-01-22 1:31 ` Jonathan Gray
1 sibling, 0 replies; 4+ messages in thread
From: Jonathan Gray @ 2021-01-22 1:31 UTC (permalink / raw)
To: u-boot
U-Boot 2020.07 worked, broken on rockpro64 by
commit 3ae64582fb8ceead4fc464cd2055eb3eaef78ccc (refs/bisect/bad)
Author: Jagan Teki <jagan@amarulasolutions.com>
Date: Mon Jul 20 14:53:09 2020 +0530
rockchip: rockpro64: Enable USB3.0 Host
Enable USB3.0 Host support for RockPro64 boards.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
according to Kurt Miller who bisected this when the same problem was
encountered booting OpenBSD. I don't have any rk3399 myself.
https://marc.info/?l=openbsd-ports&m=161005506031482&w=2
https://marc.info/?l=openbsd-ports&m=161012461223737&w=2
We ended up disabling CONFIG_USE_PREBOOT in rk3399 targets to fix
booting via non-usb as well.
On Thu, Jan 21, 2021 at 11:37:16AM +0800, Kever Yang wrote:
> Hi Vagrant,
>
> ??? Do you know which version is the last version that works in this case?
>
> ??? The firmware is from eMMC and it's wired for USB to affect the boot
> process.
>
> Thanks,
>
> - Kever
>
> On 2021/1/21 ??8:08, Vagrant Cascadian wrote:
> > It seems rockpro64-rk3399 and pinebook-pro-rk3399 fail to boot when usb
> > is started. It hangs indefinitely at:
> >
> > ## Flattened Device Tree blob at 01f00000
> > Booting using the fdt blob at 0x1f00000
> >
> > I have observed this also using 2020.10 on rockpro64-rk3399, though on
> > pinebook-pro-rk3399 usb does not work and so it basically avoids
> > triggering the issue.
> >
> > Setting CONFIG_USE_PREBOOT=n in the config works around the problem,
> > though obviously by breaking usb keyboard support or booting from USB
> > devices.
> >
> >
> > Related bugs in Debian and manjaro:
> >
> > https://bugs.debian.org/973323
> > https://bugs.debian.org/980434
> > https://gitlab.manjaro.org/manjaro-arm/packages/core/uboot-rockpro64/-/issues/4
> >
> >
> > Boot log:
> >
> > U-Boot 2021.01+dfsg-1 (Jan 17 2021 - 03:50:13 +0000)
> >
> > SoC: Rockchip rk3399
> > Reset cause: POR
> > Model: Pine64 RockPro64 v2.1
> > DRAM: 3.9 GiB
> > PMIC: RK808
> > MMC: mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
> > Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> > *** Warning - bad CRC, using default environment
> >
> > In: serial
> > Out: serial
> > Err: serial
> > Model: Pine64 RockPro64 v2.1
> > Net: eth0: ethernet at fe300000
> > starting USB...
> > Bus usb at fe380000: USB EHCI 1.00
> > Bus usb at fe3a0000: USB OHCI 1.0
> > Bus usb at fe3c0000: USB EHCI 1.00
> > Bus usb at fe3e0000: USB OHCI 1.0
> > Bus dwc3: usb maximum-speed not found
> > Register 2000140 NbrPorts 2
> > Starting the controller
> > USB XHCI 1.10
> > scanning bus usb at fe380000 for devices... 1 USB Device(s) found
> > scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
> > scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
> > scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
> > scanning bus dwc3 for devices... 1 USB Device(s) found
> > scanning usb for storage devices... 0 Storage Device(s) found
> > Hit any key to stop autoboot: 0
> > => printenv preboot
> > preboot=usb start
> > => usb reset
> > resetting USB...
> > Bus usb at fe380000: USB EHCI 1.00
> > Bus usb at fe3a0000: USB OHCI 1.0
> > Bus usb at fe3c0000: USB EHCI 1.00
> > Bus usb at fe3e0000: USB OHCI 1.0
> > Bus dwc3: usb maximum-speed not found
> > Register 2000140 NbrPorts 2
> > Starting the controller
> > USB XHCI 1.10
> > scanning bus usb at fe380000 for devices... 1 USB Device(s) found
> > scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
> > scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
> > scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
> > scanning bus dwc3 for devices... 1 USB Device(s) found
> > scanning usb for storage devices... 0 Storage Device(s) found
> > => boot
> > Card did not respond to voltage select! : -110
> > switch to partitions #0, OK
> > mmc1 is current device
> > Scanning mmc 1:1...
> > Found /extlinux/extlinux.conf
> > Retrieving file: /extlinux/extlinux.conf
> > 144 bytes read in 5 ms (27.3 KiB/s)
> > 1: Debian-Installer
> > Retrieving file: /initrd.gz
> > 28995285 bytes read in 1287 ms (21.5 MiB/s)
> > Retrieving file: /vmlinuz
> > 26922864 bytes read in 1195 ms (21.5 MiB/s)
> > Retrieving file: /dtbs/rockchip/rk3399-rockpro64.dtb
> > 56849 bytes read in 13 ms (4.2 MiB/s)
> > Moving Image from 0x2080000 to 0x2200000, end=3c50000
> > ## Flattened Device Tree blob at 01f00000
> > Booting using the fdt blob at 0x1f00000
> >
> >
> >
> > live well,
> > vagrant
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-01-22 1:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-21 0:08 Boot failure triggered by USB on rockpro64-rk3399 and pinebook-pro-rk3399 Vagrant Cascadian
2021-01-21 3:37 ` Kever Yang
2021-01-21 9:12 ` Alper Nebi Yasak
2021-01-22 1:31 ` Jonathan Gray
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.