From: Sai Prakash Ranjan <quic_saipraka@quicinc.com> To: <arnd@arndb.de>, <catalin.marinas@arm.com>, <rostedt@goodmis.org> Cc: <gregkh@linuxfoundation.org>, <linux-arm-kernel@lists.infradead.org>, <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <maz@kernel.org>, <quic_psodagud@quicinc.com>, <quic_tsoni@quicinc.com>, <will@kernel.org>, Sai Prakash Ranjan <quic_saipraka@quicinc.com> Subject: [PATCHv14 7/9] asm-generic/io: Add logging support for MMIO accessors Date: Wed, 4 May 2022 16:58:26 +0530 [thread overview] Message-ID: <ecbb5bf6d01d87c8a676ddda44479826dbbf57ae.1651663123.git.quic_saipraka@quicinc.com> (raw) In-Reply-To: <cover.1651663123.git.quic_saipraka@quicinc.com> Add logging support for MMIO high level accessors such as read{b,w,l,q} and their relaxed versions to aid in debugging unexpected crashes/hangs caused by the corresponding MMIO operation. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> --- include/asm-generic/io.h | 91 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 87 insertions(+), 4 deletions(-) diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index 7ce93aaf69f8..9c5114335a2d 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -10,6 +10,7 @@ #include <asm/page.h> /* I/O is all done through memory accesses */ #include <linux/string.h> /* for memset() and memcpy() */ #include <linux/types.h> +#include <linux/instruction_pointer.h> #ifdef CONFIG_GENERIC_IOMAP #include <asm-generic/iomap.h> @@ -61,6 +62,44 @@ #define __io_par(v) __io_ar(v) #endif +/* + * "__DISABLE_TRACE_MMIO__" flag can be used to disable MMIO tracing for + * specific kernel drivers in case of excessive/unwanted logging. + * + * Usage: Add a #define flag at the beginning of the driver file. + * Ex: #define __DISABLE_TRACE_MMIO__ + * #include <...> + * ... + */ +#if IS_ENABLED(CONFIG_TRACE_MMIO_ACCESS) && !(defined(__DISABLE_TRACE_MMIO__)) +#include <linux/tracepoint-defs.h> + +DECLARE_TRACEPOINT(rwmmio_write); +DECLARE_TRACEPOINT(rwmmio_post_write); +DECLARE_TRACEPOINT(rwmmio_read); +DECLARE_TRACEPOINT(rwmmio_post_read); + +void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr); +void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr); +void log_read_mmio(u8 width, const volatile void __iomem *addr, + unsigned long caller_addr); +void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr, + unsigned long caller_addr); + +#else + +static inline void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_read_mmio(u8 width, const volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr, + unsigned long caller_addr) {} + +#endif /* CONFIG_TRACE_MMIO_ACCESS */ /* * __raw_{read,write}{b,w,l,q}() access memory in native endianness. @@ -149,9 +188,11 @@ static inline u8 readb(const volatile void __iomem *addr) { u8 val; + log_read_mmio(8, addr, _THIS_IP_); __io_br(); val = __raw_readb(addr); __io_ar(val); + log_post_read_mmio(val, 8, addr, _THIS_IP_); return val; } #endif @@ -162,9 +203,11 @@ static inline u16 readw(const volatile void __iomem *addr) { u16 val; + log_read_mmio(16, addr, _THIS_IP_); __io_br(); val = __le16_to_cpu((__le16 __force)__raw_readw(addr)); __io_ar(val); + log_post_read_mmio(val, 16, addr, _THIS_IP_); return val; } #endif @@ -175,9 +218,11 @@ static inline u32 readl(const volatile void __iomem *addr) { u32 val; + log_read_mmio(32, addr, _THIS_IP_); __io_br(); val = __le32_to_cpu((__le32 __force)__raw_readl(addr)); __io_ar(val); + log_post_read_mmio(val, 32, addr, _THIS_IP_); return val; } #endif @@ -189,9 +234,11 @@ static inline u64 readq(const volatile void __iomem *addr) { u64 val; + log_read_mmio(64, addr, _THIS_IP_); __io_br(); val = __le64_to_cpu(__raw_readq(addr)); __io_ar(val); + log_post_read_mmio(val, 64, addr, _THIS_IP_); return val; } #endif @@ -201,9 +248,11 @@ static inline u64 readq(const volatile void __iomem *addr) #define writeb writeb static inline void writeb(u8 value, volatile void __iomem *addr) { + log_write_mmio(value, 8, addr, _THIS_IP_); __io_bw(); __raw_writeb(value, addr); __io_aw(); + log_post_write_mmio(value, 8, addr, _THIS_IP_); } #endif @@ -211,9 +260,11 @@ static inline void writeb(u8 value, volatile void __iomem *addr) #define writew writew static inline void writew(u16 value, volatile void __iomem *addr) { + log_write_mmio(value, 16, addr, _THIS_IP_); __io_bw(); __raw_writew((u16 __force)cpu_to_le16(value), addr); __io_aw(); + log_post_write_mmio(value, 16, addr, _THIS_IP_); } #endif @@ -221,9 +272,11 @@ static inline void writew(u16 value, volatile void __iomem *addr) #define writel writel static inline void writel(u32 value, volatile void __iomem *addr) { + log_write_mmio(value, 32, addr, _THIS_IP_); __io_bw(); __raw_writel((u32 __force)__cpu_to_le32(value), addr); __io_aw(); + log_post_write_mmio(value, 32, addr, _THIS_IP_); } #endif @@ -232,9 +285,11 @@ static inline void writel(u32 value, volatile void __iomem *addr) #define writeq writeq static inline void writeq(u64 value, volatile void __iomem *addr) { + log_write_mmio(value, 64, addr, _THIS_IP_); __io_bw(); __raw_writeq(__cpu_to_le64(value), addr); __io_aw(); + log_post_write_mmio(value, 64, addr, _THIS_IP_); } #endif #endif /* CONFIG_64BIT */ @@ -248,7 +303,12 @@ static inline void writeq(u64 value, volatile void __iomem *addr) #define readb_relaxed readb_relaxed static inline u8 readb_relaxed(const volatile void __iomem *addr) { - return __raw_readb(addr); + u8 val; + + log_read_mmio(8, addr, _THIS_IP_); + val = __raw_readb(addr); + log_post_read_mmio(val, 8, addr, _THIS_IP_); + return val; } #endif @@ -256,7 +316,12 @@ static inline u8 readb_relaxed(const volatile void __iomem *addr) #define readw_relaxed readw_relaxed static inline u16 readw_relaxed(const volatile void __iomem *addr) { - return __le16_to_cpu(__raw_readw(addr)); + u16 val; + + log_read_mmio(16, addr, _THIS_IP_); + val = __le16_to_cpu(__raw_readw(addr)); + log_post_read_mmio(val, 16, addr, _THIS_IP_); + return val; } #endif @@ -264,7 +329,12 @@ static inline u16 readw_relaxed(const volatile void __iomem *addr) #define readl_relaxed readl_relaxed static inline u32 readl_relaxed(const volatile void __iomem *addr) { - return __le32_to_cpu(__raw_readl(addr)); + u32 val; + + log_read_mmio(32, addr, _THIS_IP_); + val = __le32_to_cpu(__raw_readl(addr)); + log_post_read_mmio(val, 32, addr, _THIS_IP_); + return val; } #endif @@ -272,7 +342,12 @@ static inline u32 readl_relaxed(const volatile void __iomem *addr) #define readq_relaxed readq_relaxed static inline u64 readq_relaxed(const volatile void __iomem *addr) { - return __le64_to_cpu(__raw_readq(addr)); + u64 val; + + log_read_mmio(64, addr, _THIS_IP_); + val = __le64_to_cpu(__raw_readq(addr)); + log_post_read_mmio(val, 64, addr, _THIS_IP_); + return val; } #endif @@ -280,7 +355,9 @@ static inline u64 readq_relaxed(const volatile void __iomem *addr) #define writeb_relaxed writeb_relaxed static inline void writeb_relaxed(u8 value, volatile void __iomem *addr) { + log_write_mmio(value, 8, addr, _THIS_IP_); __raw_writeb(value, addr); + log_post_write_mmio(value, 8, addr, _THIS_IP_); } #endif @@ -288,7 +365,9 @@ static inline void writeb_relaxed(u8 value, volatile void __iomem *addr) #define writew_relaxed writew_relaxed static inline void writew_relaxed(u16 value, volatile void __iomem *addr) { + log_write_mmio(value, 16, addr, _THIS_IP_); __raw_writew(cpu_to_le16(value), addr); + log_post_write_mmio(value, 16, addr, _THIS_IP_); } #endif @@ -296,7 +375,9 @@ static inline void writew_relaxed(u16 value, volatile void __iomem *addr) #define writel_relaxed writel_relaxed static inline void writel_relaxed(u32 value, volatile void __iomem *addr) { + log_write_mmio(value, 32, addr, _THIS_IP_); __raw_writel(__cpu_to_le32(value), addr); + log_post_write_mmio(value, 32, addr, _THIS_IP_); } #endif @@ -304,7 +385,9 @@ static inline void writel_relaxed(u32 value, volatile void __iomem *addr) #define writeq_relaxed writeq_relaxed static inline void writeq_relaxed(u64 value, volatile void __iomem *addr) { + log_write_mmio(value, 64, addr, _THIS_IP_); __raw_writeq(__cpu_to_le64(value), addr); + log_post_write_mmio(value, 64, addr, _THIS_IP_); } #endif -- 2.33.1
WARNING: multiple messages have this Message-ID (diff)
From: Sai Prakash Ranjan <quic_saipraka@quicinc.com> To: <arnd@arndb.de>, <catalin.marinas@arm.com>, <rostedt@goodmis.org> Cc: <gregkh@linuxfoundation.org>, <linux-arm-kernel@lists.infradead.org>, <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <maz@kernel.org>, <quic_psodagud@quicinc.com>, <quic_tsoni@quicinc.com>, <will@kernel.org>, Sai Prakash Ranjan <quic_saipraka@quicinc.com> Subject: [PATCHv14 7/9] asm-generic/io: Add logging support for MMIO accessors Date: Wed, 4 May 2022 16:58:26 +0530 [thread overview] Message-ID: <ecbb5bf6d01d87c8a676ddda44479826dbbf57ae.1651663123.git.quic_saipraka@quicinc.com> (raw) In-Reply-To: <cover.1651663123.git.quic_saipraka@quicinc.com> Add logging support for MMIO high level accessors such as read{b,w,l,q} and their relaxed versions to aid in debugging unexpected crashes/hangs caused by the corresponding MMIO operation. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> --- include/asm-generic/io.h | 91 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 87 insertions(+), 4 deletions(-) diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index 7ce93aaf69f8..9c5114335a2d 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -10,6 +10,7 @@ #include <asm/page.h> /* I/O is all done through memory accesses */ #include <linux/string.h> /* for memset() and memcpy() */ #include <linux/types.h> +#include <linux/instruction_pointer.h> #ifdef CONFIG_GENERIC_IOMAP #include <asm-generic/iomap.h> @@ -61,6 +62,44 @@ #define __io_par(v) __io_ar(v) #endif +/* + * "__DISABLE_TRACE_MMIO__" flag can be used to disable MMIO tracing for + * specific kernel drivers in case of excessive/unwanted logging. + * + * Usage: Add a #define flag at the beginning of the driver file. + * Ex: #define __DISABLE_TRACE_MMIO__ + * #include <...> + * ... + */ +#if IS_ENABLED(CONFIG_TRACE_MMIO_ACCESS) && !(defined(__DISABLE_TRACE_MMIO__)) +#include <linux/tracepoint-defs.h> + +DECLARE_TRACEPOINT(rwmmio_write); +DECLARE_TRACEPOINT(rwmmio_post_write); +DECLARE_TRACEPOINT(rwmmio_read); +DECLARE_TRACEPOINT(rwmmio_post_read); + +void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr); +void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr); +void log_read_mmio(u8 width, const volatile void __iomem *addr, + unsigned long caller_addr); +void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr, + unsigned long caller_addr); + +#else + +static inline void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_read_mmio(u8 width, const volatile void __iomem *addr, + unsigned long caller_addr) {} +static inline void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr, + unsigned long caller_addr) {} + +#endif /* CONFIG_TRACE_MMIO_ACCESS */ /* * __raw_{read,write}{b,w,l,q}() access memory in native endianness. @@ -149,9 +188,11 @@ static inline u8 readb(const volatile void __iomem *addr) { u8 val; + log_read_mmio(8, addr, _THIS_IP_); __io_br(); val = __raw_readb(addr); __io_ar(val); + log_post_read_mmio(val, 8, addr, _THIS_IP_); return val; } #endif @@ -162,9 +203,11 @@ static inline u16 readw(const volatile void __iomem *addr) { u16 val; + log_read_mmio(16, addr, _THIS_IP_); __io_br(); val = __le16_to_cpu((__le16 __force)__raw_readw(addr)); __io_ar(val); + log_post_read_mmio(val, 16, addr, _THIS_IP_); return val; } #endif @@ -175,9 +218,11 @@ static inline u32 readl(const volatile void __iomem *addr) { u32 val; + log_read_mmio(32, addr, _THIS_IP_); __io_br(); val = __le32_to_cpu((__le32 __force)__raw_readl(addr)); __io_ar(val); + log_post_read_mmio(val, 32, addr, _THIS_IP_); return val; } #endif @@ -189,9 +234,11 @@ static inline u64 readq(const volatile void __iomem *addr) { u64 val; + log_read_mmio(64, addr, _THIS_IP_); __io_br(); val = __le64_to_cpu(__raw_readq(addr)); __io_ar(val); + log_post_read_mmio(val, 64, addr, _THIS_IP_); return val; } #endif @@ -201,9 +248,11 @@ static inline u64 readq(const volatile void __iomem *addr) #define writeb writeb static inline void writeb(u8 value, volatile void __iomem *addr) { + log_write_mmio(value, 8, addr, _THIS_IP_); __io_bw(); __raw_writeb(value, addr); __io_aw(); + log_post_write_mmio(value, 8, addr, _THIS_IP_); } #endif @@ -211,9 +260,11 @@ static inline void writeb(u8 value, volatile void __iomem *addr) #define writew writew static inline void writew(u16 value, volatile void __iomem *addr) { + log_write_mmio(value, 16, addr, _THIS_IP_); __io_bw(); __raw_writew((u16 __force)cpu_to_le16(value), addr); __io_aw(); + log_post_write_mmio(value, 16, addr, _THIS_IP_); } #endif @@ -221,9 +272,11 @@ static inline void writew(u16 value, volatile void __iomem *addr) #define writel writel static inline void writel(u32 value, volatile void __iomem *addr) { + log_write_mmio(value, 32, addr, _THIS_IP_); __io_bw(); __raw_writel((u32 __force)__cpu_to_le32(value), addr); __io_aw(); + log_post_write_mmio(value, 32, addr, _THIS_IP_); } #endif @@ -232,9 +285,11 @@ static inline void writel(u32 value, volatile void __iomem *addr) #define writeq writeq static inline void writeq(u64 value, volatile void __iomem *addr) { + log_write_mmio(value, 64, addr, _THIS_IP_); __io_bw(); __raw_writeq(__cpu_to_le64(value), addr); __io_aw(); + log_post_write_mmio(value, 64, addr, _THIS_IP_); } #endif #endif /* CONFIG_64BIT */ @@ -248,7 +303,12 @@ static inline void writeq(u64 value, volatile void __iomem *addr) #define readb_relaxed readb_relaxed static inline u8 readb_relaxed(const volatile void __iomem *addr) { - return __raw_readb(addr); + u8 val; + + log_read_mmio(8, addr, _THIS_IP_); + val = __raw_readb(addr); + log_post_read_mmio(val, 8, addr, _THIS_IP_); + return val; } #endif @@ -256,7 +316,12 @@ static inline u8 readb_relaxed(const volatile void __iomem *addr) #define readw_relaxed readw_relaxed static inline u16 readw_relaxed(const volatile void __iomem *addr) { - return __le16_to_cpu(__raw_readw(addr)); + u16 val; + + log_read_mmio(16, addr, _THIS_IP_); + val = __le16_to_cpu(__raw_readw(addr)); + log_post_read_mmio(val, 16, addr, _THIS_IP_); + return val; } #endif @@ -264,7 +329,12 @@ static inline u16 readw_relaxed(const volatile void __iomem *addr) #define readl_relaxed readl_relaxed static inline u32 readl_relaxed(const volatile void __iomem *addr) { - return __le32_to_cpu(__raw_readl(addr)); + u32 val; + + log_read_mmio(32, addr, _THIS_IP_); + val = __le32_to_cpu(__raw_readl(addr)); + log_post_read_mmio(val, 32, addr, _THIS_IP_); + return val; } #endif @@ -272,7 +342,12 @@ static inline u32 readl_relaxed(const volatile void __iomem *addr) #define readq_relaxed readq_relaxed static inline u64 readq_relaxed(const volatile void __iomem *addr) { - return __le64_to_cpu(__raw_readq(addr)); + u64 val; + + log_read_mmio(64, addr, _THIS_IP_); + val = __le64_to_cpu(__raw_readq(addr)); + log_post_read_mmio(val, 64, addr, _THIS_IP_); + return val; } #endif @@ -280,7 +355,9 @@ static inline u64 readq_relaxed(const volatile void __iomem *addr) #define writeb_relaxed writeb_relaxed static inline void writeb_relaxed(u8 value, volatile void __iomem *addr) { + log_write_mmio(value, 8, addr, _THIS_IP_); __raw_writeb(value, addr); + log_post_write_mmio(value, 8, addr, _THIS_IP_); } #endif @@ -288,7 +365,9 @@ static inline void writeb_relaxed(u8 value, volatile void __iomem *addr) #define writew_relaxed writew_relaxed static inline void writew_relaxed(u16 value, volatile void __iomem *addr) { + log_write_mmio(value, 16, addr, _THIS_IP_); __raw_writew(cpu_to_le16(value), addr); + log_post_write_mmio(value, 16, addr, _THIS_IP_); } #endif @@ -296,7 +375,9 @@ static inline void writew_relaxed(u16 value, volatile void __iomem *addr) #define writel_relaxed writel_relaxed static inline void writel_relaxed(u32 value, volatile void __iomem *addr) { + log_write_mmio(value, 32, addr, _THIS_IP_); __raw_writel(__cpu_to_le32(value), addr); + log_post_write_mmio(value, 32, addr, _THIS_IP_); } #endif @@ -304,7 +385,9 @@ static inline void writel_relaxed(u32 value, volatile void __iomem *addr) #define writeq_relaxed writeq_relaxed static inline void writeq_relaxed(u64 value, volatile void __iomem *addr) { + log_write_mmio(value, 64, addr, _THIS_IP_); __raw_writeq(__cpu_to_le64(value), addr); + log_post_write_mmio(value, 64, addr, _THIS_IP_); } #endif -- 2.33.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-04 11:29 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-04 11:28 [PATCHv14 0/9] lib/rwmmio/arm64: Add support to trace register reads/writes Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 1/9] arm64: io: Use asm-generic high level MMIO accessors Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 2/9] coresight: etm4x: Use asm-generic IO memory barriers Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-05 23:44 ` Suzuki K Poulose 2022-05-05 23:44 ` Suzuki K Poulose 2022-05-06 3:02 ` Sai Prakash Ranjan 2022-05-06 3:02 ` Sai Prakash Ranjan 2022-05-06 9:21 ` Suzuki K Poulose 2022-05-06 9:21 ` Suzuki K Poulose 2022-05-06 13:22 ` Sai Prakash Ranjan 2022-05-06 13:22 ` Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 3/9] irqchip/tegra: Fix overflow implicit truncation warnings Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 4/9] drm/meson: " Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 5/9] lib: Add register read/write tracing support Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-11 3:51 ` Sai Prakash Ranjan 2022-05-11 3:51 ` Sai Prakash Ranjan 2022-05-17 6:41 ` Sai Prakash Ranjan 2022-05-17 6:41 ` Sai Prakash Ranjan 2022-05-18 14:07 ` Steven Rostedt 2022-05-18 14:07 ` Steven Rostedt 2022-05-18 15:18 ` Sai Prakash Ranjan 2022-05-18 15:18 ` Sai Prakash Ranjan 2022-05-18 16:45 ` Sai Prakash Ranjan 2022-05-18 16:45 ` Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 6/9] KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan [this message] 2022-05-04 11:28 ` [PATCHv14 7/9] asm-generic/io: Add logging support for MMIO accessors Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 8/9] serial: qcom_geni_serial: Disable MMIO tracing for geni serial Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-04 11:28 ` [PATCHv14 9/9] soc: qcom: geni: Disable MMIO tracing for GENI SE Sai Prakash Ranjan 2022-05-04 11:28 ` Sai Prakash Ranjan 2022-05-04 11:32 ` [PATCHv14 0/9] lib/rwmmio/arm64: Add support to trace register reads/writes Sai Prakash Ranjan 2022-05-04 11:32 ` Sai Prakash Ranjan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=ecbb5bf6d01d87c8a676ddda44479826dbbf57ae.1651663123.git.quic_saipraka@quicinc.com \ --to=quic_saipraka@quicinc.com \ --cc=arnd@arndb.de \ --cc=catalin.marinas@arm.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=maz@kernel.org \ --cc=quic_psodagud@quicinc.com \ --cc=quic_tsoni@quicinc.com \ --cc=rostedt@goodmis.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.