[lm-sensors] [PATCH] vt1211: add probing of alternate config index

[lm-sensors] [PATCH] vt1211: add probing of alternate config index

[Juerg Haefliger]

The configuration index port of the vt1211 can be accessed at two
different addresses 0x2e or 0x4e, depending on pin strappings. This
patch adds support to scan both addresses during module
initialization.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hwmon-vt1211-add-probing-of-alternate-config-index-port.patch
Type: application/octet-stream
Size: 3565 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070130/2a33699f/attachment.obj 

[lm-sensors] [PATCH] vt1211: add probing of alternate config

[Jean Delvare]

Hi Juerg,

On Tue, 30 Jan 2007 14:37:41 -0800, Juerg Haefliger wrote:
> The configuration index port of the vt1211 can be accessed at two
> different addresses 0x2e or 0x4e, depending on pin strappings. This
> patch adds support to scan both addresses during module
> initialization.
> 
> Signed-off-by: Juerg Haefliger <juergh at gmail.com>

Patch looks really good, applied, thanks. Hopefully Joe Friedrichsen
will also confirm that the new vt1211 driver works OK for him now.

-- 
Jean Delvare

[lm-sensors] [PATCH] vt1211: add probing of alternate config

[Joe Friedrichsen]

On 2/4/07, Jean Delvare <khali at linux-fr.org> wrote:
> Patch looks really good, applied, thanks. Hopefully Joe Friedrichsen
> will also confirm that the new vt1211 driver works OK for him now.

Sorry for the delay -- a friend asked me to help her move house. I
have tomorrow/Monday off, so expect a report in a few hours.

Joe

[lm-sensors] [PATCH] vt1211: add probing of alternate config

[Joe Friedrichsen]

On 2/4/07, Joe Friedrichsen <pengi.films at gmail.com> wrote:
> Sorry for the delay -- a friend asked me to help her move house. I
> have tomorrow/Monday off, so expect a report in a few hours.

The patched driver works. I used Juerg's patch on the vanilla 2.6.20
kernel and sensors reports:

vt1211-isa-ec00
Adapter: ISA adapter
+2.5V:     +0.00 V  (min =  +2.10 V, max =  +0.88 V)   ALARM
VCore:     +0.00 V  (min =  +0.55 V, max =  +2.39 V)   ALARM
+5V:       +0.00 V  (min =  +5.66 V, max =  +4.03 V)   ALARM
+12V:      +0.00 V  (min = +14.99 V, max = +10.65 V)   ALARM
+3.3V:     +3.28 V  (min =  +3.13 V, max =  +3.46 V)
Case Fan:    0 RPM  (min = 27306 RPM, div = 2)
CPU Fan:     0 RPM  (min = 5041 RPM, div = 2)
CPU Temp: +145.0?C  (high =   +34?C, hyst =   +89?C)
Int Temp:  +64.0?C  (high =  +199?C, hyst =   +69?C)
ERROR: Can't get TEMP3 data!
vid:      +1.700 V  (VRM Version 9.0)

The chip really isn't wired to do much, as you can see. :-)

Thanks for your quick help!
Joe