[PATCH v2 1/2] media: vimc: stream: add missing function documentation

[PATCH v2 1/2] media: vimc: stream: add missing function documentation

[André Almeida]

Add comments at vimc_streamer_s_stream and vimc_streamer_thread, making
the vimc-stream totally documented.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
---
Commit extracted from [PATCH 0/4] media: vimc: Minor code cleanup
and documentation

Changes in v2: fix typos

 drivers/media/platform/vimc/vimc-streamer.c | 22 +++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/media/platform/vimc/vimc-streamer.c b/drivers/media/platform/vimc/vimc-streamer.c
index 236ade38f1da..76435e87d609 100644
--- a/drivers/media/platform/vimc/vimc-streamer.c
+++ b/drivers/media/platform/vimc/vimc-streamer.c
@@ -122,6 +122,14 @@ static int vimc_streamer_pipeline_init(struct vimc_stream *stream,
 	return -EINVAL;
 }
 
+/*
+ * vimc_streamer_thread - process frames through the pipeline
+ *
+ * @data:	vimc_stream struct of the current streaming
+ *
+ * From the source to the sink, gets a frame from each subdevice and send to
+ * the next one of the pipeline in a fixed framerate.
+ */
 static int vimc_streamer_thread(void *data)
 {
 	struct vimc_stream *stream = data;
@@ -149,6 +157,20 @@ static int vimc_streamer_thread(void *data)
 	return 0;
 }
 
+/*
+ * vimc_streamer_s_stream - start/stop the streaming on the media pipeline
+ *
+ * @stream:	the pointer to the stream structure of the current stream
+ * @ved:	pointer to the vimc entity of the entity of the stream
+ * @enable:	flag to determine if stream should start/stop
+ *
+ * When starting, check if there is no stream->kthread allocated. This should
+ * indicate that a streaming is already running. Then, it initializes
+ * the pipeline, creates and runs a kthread to consume buffers through the
+ * pipeline.
+ * When stopping, analogously check if there is a stream running, stops
+ * the thread and terminates the pipeline.
+ */
 int vimc_streamer_s_stream(struct vimc_stream *stream,
 			   struct vimc_ent_device *ved,
 			   int enable)
-- 
2.22.0

[PATCH v2 2/2] media: docs: create vimc documentation

[André Almeida]

Create vimc documentation file to explain it basics features, it's
topology, how to configure it and to document vimc's subdevices.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Suggested-by: Helen Koike <helen.koike@collabora.com>
---
Commit extracted from [PATCH 0/4] media: vimc: Minor code cleanup
and documentation

Changes in v2:
- Fix typos
- Make clear what does means scale factor

 Documentation/media/v4l-drivers/index.rst |  1 +
 Documentation/media/v4l-drivers/vimc.dot  | 22 +++++
 Documentation/media/v4l-drivers/vimc.rst  | 98 +++++++++++++++++++++++
 3 files changed, 121 insertions(+)
 create mode 100644 Documentation/media/v4l-drivers/vimc.dot
 create mode 100644 Documentation/media/v4l-drivers/vimc.rst

diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst
index 33a055907258..c4c78a28654c 100644
--- a/Documentation/media/v4l-drivers/index.rst
+++ b/Documentation/media/v4l-drivers/index.rst
@@ -64,5 +64,6 @@ For more details see the file COPYING in the source distribution of Linux.
 	si476x
 	soc-camera
 	uvcvideo
+	vimc
 	vivid
 	zr364xx
diff --git a/Documentation/media/v4l-drivers/vimc.dot b/Documentation/media/v4l-drivers/vimc.dot
new file mode 100644
index 000000000000..57863a13fa39
--- /dev/null
+++ b/Documentation/media/v4l-drivers/vimc.dot
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port0 -> n00000005:port0 [style=bold]
+	n00000001:port0 -> n0000000b [style=bold]
+	n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000003:port0 -> n00000008:port0 [style=bold]
+	n00000003:port0 -> n0000000f [style=bold]
+	n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000005:port1 -> n00000017:port0
+	n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000008:port1 -> n00000017:port0 [style=dashed]
+	n0000000b [label="Raw Capture 0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000000f [label="Raw Capture 1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n00000013 [label="RGB/YUV Input\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n00000013 -> n00000017:port0 [style=dashed]
+	n00000017 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000017:port1 -> n0000001a [style=bold]
+	n0000001a [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+}
diff --git a/Documentation/media/v4l-drivers/vimc.rst b/Documentation/media/v4l-drivers/vimc.rst
new file mode 100644
index 000000000000..e235f806e252
--- /dev/null
+++ b/Documentation/media/v4l-drivers/vimc.rst
@@ -0,0 +1,98 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Media Controller Driver (vimc)
+==========================================
+
+The vimc driver emulates complex video hardware using the V4L2 API and the Media
+API. It has a capture device and three subdevices: sensor, debayer and scaler.
+
+Topology
+--------
+
+The topology is hardcoded, although you could modify it in vimc-core and
+recompile the driver to achieve your own topology. This is the default topology:
+
+.. _vimc_topology_graph:
+
+.. kernel-figure:: vimc.dot
+    :alt:   vimc.dot
+    :align: center
+
+    Media pipeline graph on vimc
+
+Configuring the topology
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Each subdevice will come with its default configuration (pixelformat, height,
+width, ...). One needs to configure the topology in order to match the
+configuration on each linked subdevice to stream frames through the pipeline.
+If the configuration doesn't match, the stream will fail. The ``v4l2-utils``
+is a bundle of user-space applications, that comes with ``media-ctl`` and
+``v4l2-ctl`` that can be used to configure the vimc configuration. This sequence
+of commands fits for the default topology:
+
+.. code-block:: bash
+
+        media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
+        v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
+        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
+        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
+
+Subdevices
+----------
+
+Subdevices define the behavior of an entity in the topology. Depending on the
+subdevice, the entity can have multiple pads of type source or sink.
+
+vimc-sensor:
+	Generates images in several formats using video test pattern generator.
+	Exposes:
+
+	* 1 Pad source
+
+vimc-debayer:
+	Transforms images in bayer format into a non-bayer format.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-scaler:
+	Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
+        1920x1440 image. (this value can be configured, see at
+        `Module options`_).
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-capture:
+	Exposes node /dev/videoX to allow userspace to capture the stream.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+Module options
+---------------
+
+Vimc has a few module parameters to configure the driver. You should pass
+those arguments to each subdevice, not to the vimc module. For example::
+
+        vimc_subdevice.param=value
+
+* ``vimc_scaler.sca_mult=<unsigned int>``
+
+        Image size multiplier factor to be used to multiply both width and
+        height, so the image size will be ``sca_mult^2`` bigger than the
+        original one. Currently, only supports scaling up (the default value
+        is 3).
+
+* ``vimc_debayer.deb_mean_win_size=<unsigned int>``
+
+        Window size to calculate the mean. Note: the window size needs to be an
+        odd number, as the main pixel stays in the center of the window,
+        otherwise the next odd number is considered (the default value is 3).
-- 
2.22.0

Re: [PATCH v2 1/2] media: vimc: stream: add missing function documentation

[Randy Dunlap]

On 6/15/19 7:09 PM, André Almeida wrote:
> Add comments at vimc_streamer_s_stream and vimc_streamer_thread, making
> the vimc-stream totally documented.
> 
> Signed-off-by: André Almeida <andrealmeid@collabora.com>
> ---
> Commit extracted from [PATCH 0/4] media: vimc: Minor code cleanup
> and documentation
> 
> Changes in v2: fix typos
> 
>  drivers/media/platform/vimc/vimc-streamer.c | 22 +++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/media/platform/vimc/vimc-streamer.c b/drivers/media/platform/vimc/vimc-streamer.c
> index 236ade38f1da..76435e87d609 100644
> --- a/drivers/media/platform/vimc/vimc-streamer.c
> +++ b/drivers/media/platform/vimc/vimc-streamer.c
> @@ -122,6 +122,14 @@ static int vimc_streamer_pipeline_init(struct vimc_stream *stream,
>  	return -EINVAL;
>  }
>  
> +/*
> + * vimc_streamer_thread - process frames through the pipeline
> + *
> + * @data:	vimc_stream struct of the current streaming

                                   of the current stream               ??

> + *
> + * From the source to the sink, gets a frame from each subdevice and send to
> + * the next one of the pipeline in a fixed framerate.
> + */
>  static int vimc_streamer_thread(void *data)
>  {
>  	struct vimc_stream *stream = data;
> @@ -149,6 +157,20 @@ static int vimc_streamer_thread(void *data)
>  	return 0;
>  }
>  
> +/*
> + * vimc_streamer_s_stream - start/stop the streaming on the media pipeline
> + *
> + * @stream:	the pointer to the stream structure of the current stream
> + * @ved:	pointer to the vimc entity of the entity of the stream
> + * @enable:	flag to determine if stream should start/stop
> + *
> + * When starting, check if there is no stream->kthread allocated. This should
> + * indicate that a streaming is already running. Then, it initializes
> + * the pipeline, creates and runs a kthread to consume buffers through the
> + * pipeline.
> + * When stopping, analogously check if there is a stream running, stops
> + * the thread and terminates the pipeline.
> + */
>  int vimc_streamer_s_stream(struct vimc_stream *stream,
>  			   struct vimc_ent_device *ved,
>  			   int enable)
> 


-- 
~Randy