All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Cheng-Yi Chiang <cychiang@chromium.org>, linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>, Taniya Das <tdas@codeaurora.org>,
	Rohit kumar <rohitkr@codeaurora.org>,
	Banajit Goswami <bgoswami@codeaurora.org>,
	Patrick Lai <plai@codeaurora.org>, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Stephan Gerhold <stephan@gerhold.net>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Srinivasa Rao <srivasam@codeaurora.org>,
	Ajye Huang <ajye_huang@compal.corp-partner.google.com>,
	xuyuqing@huaqin.corp-partner.google.com, dianders@chromium.org,
	dgreid@chromium.org, tzungbi@chromium.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	alsa-devel@alsa-project.org, Ajit Pandey <ajitp@codeaurora.org>
Subject: Re: [PATCH v12 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration
Date: Tue, 27 Oct 2020 10:08:03 +0000	[thread overview]
Message-ID: <ee4b5e84-cb1e-b2d5-a309-0f03a4e643e2@linaro.org> (raw)
In-Reply-To: <20201027032234.1705835-3-cychiang@chromium.org>



On 27/10/2020 03:22, Cheng-Yi Chiang wrote:
> From: Ajit Pandey <ajitp@codeaurora.org>
> 
> Add new driver to register sound card on sc7180 trogdor board and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S interfaces.
> 
> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>

Looks good to me,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---
> Changes from v11 to v12
> - Machine driver:
>   - Use the definitaion of index LPASS_DP_RX in sc7180-lpass.h.
>   - Fix compatible string.
>   - Replace a comma with semicolon.
> 
>   sound/soc/qcom/Kconfig  |  12 ++
>   sound/soc/qcom/Makefile |   2 +
>   sound/soc/qcom/sc7180.c | 266 ++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 280 insertions(+)
>   create mode 100644 sound/soc/qcom/sc7180.c
> 
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index 484cad31da25..41cb08bd5588 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -138,4 +138,16 @@ config SND_SOC_SM8250
>   	  SM8250 SoC-based systems.
>   	  Say Y if you want to use audio device on this SoCs.
>   
> +config SND_SOC_SC7180
> +	tristate "SoC Machine driver for SC7180 boards"
> +	depends on I2C
> +	select SND_SOC_QCOM_COMMON
> +	select SND_SOC_LPASS_SC7180
> +	select SND_SOC_MAX98357A
> +	select SND_SOC_RT5682_I2C
> +	help
> +	  To add support for audio on Qualcomm Technologies Inc.
> +	  SC7180 SoC-based systems.
> +	  Say Y if you want to use audio device on this SoCs.
> +
>   endif #SND_SOC_QCOM
> diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
> index effa4b3f58fa..1600ae55bd34 100644
> --- a/sound/soc/qcom/Makefile
> +++ b/sound/soc/qcom/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SND_SOC_LPASS_SC7180) += snd-soc-lpass-sc7180.o
>   snd-soc-storm-objs := storm.o
>   snd-soc-apq8016-sbc-objs := apq8016_sbc.o
>   snd-soc-apq8096-objs := apq8096.o
> +snd-soc-sc7180-objs := sc7180.o
>   snd-soc-sdm845-objs := sdm845.o
>   snd-soc-sm8250-objs := sm8250.o
>   snd-soc-qcom-common-objs := common.o
> @@ -25,6 +26,7 @@ snd-soc-qcom-common-objs := common.o
>   obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
>   obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
>   obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
>   obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
>   obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
>   obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..b391f64c3a80
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,266 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> +//
> +// sc7180.c -- ALSA SoC Machine driver for SC7180
> +
> +#include <dt-bindings/sound/sc7180-lpass.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/soc.h>
> +#include <uapi/linux/input-event-codes.h>
> +
> +#include "../codecs/rt5682.h"
> +#include "common.h"
> +#include "lpass.h"
> +
> +#define DEFAULT_MCLK_RATE		19200000
> +#define RT5682_PLL1_FREQ (48000 * 512)
> +
> +#define DRIVER_NAME "SC7180"
> +
> +struct sc7180_snd_data {
> +	struct snd_soc_card card;
> +	u32 pri_mi2s_clk_count;
> +	struct snd_soc_jack hs_jack;
> +	struct snd_soc_jack hdmi_jack;
> +};
> +
> +static void sc7180_jack_free(struct snd_jack *jack)
> +{
> +	struct snd_soc_component *component = jack->private_data;
> +
> +	snd_soc_component_set_jack(component, NULL, NULL);
> +}
> +
> +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "Headset Jack",
> +			SND_JACK_HEADSET |
> +			SND_JACK_HEADPHONE |
> +			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> +			SND_JACK_BTN_2 | SND_JACK_BTN_3,
> +			&pdata->hs_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add Headset Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hs_jack.jack;
> +
> +	snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> +	snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> +	snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> +	snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> +
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> +}
> +
> +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "HDMI Jack",
> +			SND_JACK_LINEOUT,
> +			&pdata->hdmi_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add HDMI Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hdmi_jack.jack;
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> +}
> +
> +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		return sc7180_headset_init(rtd);
> +	case MI2S_SECONDARY:
> +		return 0;
> +	case LPASS_DP_RX:
> +		return sc7180_hdmi_init(rtd);
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	int ret;
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (++data->pri_mi2s_clk_count == 1) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       DEFAULT_MCLK_RATE,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +
> +		snd_soc_dai_set_fmt(codec_dai,
> +				    SND_SOC_DAIFMT_CBS_CFS |
> +				    SND_SOC_DAIFMT_NB_NF |
> +				    SND_SOC_DAIFMT_I2S);
> +
> +		/* Configure PLL1 for codec */
> +		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> +					  DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> +		if (ret) {
> +			dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> +			return ret;
> +		}
> +
> +		/* Configure sysclk for codec */
> +		ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> +					     RT5682_PLL1_FREQ,
> +					     SND_SOC_CLOCK_IN);
> +		if (ret)
> +			dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> +				ret);
> +
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case LPASS_DP_RX:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (--data->pri_mi2s_clk_count == 0) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       0,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case LPASS_DP_RX:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		break;
> +	}
> +}
> +
> +static const struct snd_soc_ops sc7180_ops = {
> +	.startup = sc7180_snd_startup,
> +	.shutdown = sc7180_snd_shutdown,
> +};
> +
> +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> +	SND_SOC_DAPM_HP("Headphone Jack", NULL),
> +	SND_SOC_DAPM_MIC("Headset Mic", NULL),
> +};
> +
> +static void sc7180_add_ops(struct snd_soc_card *card)
> +{
> +	struct snd_soc_dai_link *link;
> +	int i;
> +
> +	for_each_card_prelinks(card, i, link) {
> +		link->ops = &sc7180_ops;
> +		link->init = sc7180_init;
> +	}
> +}
> +
> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> +	struct snd_soc_card *card;
> +	struct sc7180_snd_data *data;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	/* Allocate the private data */
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	card = &data->card;
> +	snd_soc_card_set_drvdata(card, data);
> +
> +	card->owner = THIS_MODULE;
> +	card->driver_name = DRIVER_NAME;
> +	card->dev = dev;
> +	card->dapm_widgets = sc7180_snd_widgets;
> +	card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets);
> +
> +	ret = qcom_snd_parse_of(card);
> +	if (ret)
> +		return ret;
> +
> +	sc7180_add_ops(card);
> +
> +	return devm_snd_soc_register_card(dev, card);
> +}
> +
> +static const struct of_device_id sc7180_snd_device_id[]  = {
> +	{ .compatible = "google,sc7180-trogdor"},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> +
> +static struct platform_driver sc7180_snd_driver = {
> +	.probe = sc7180_snd_platform_probe,
> +	.driver = {
> +		.name = "msm-snd-sc7180",
> +		.of_match_table = sc7180_snd_device_id,
> +	},
> +};
> +module_platform_driver(sc7180_snd_driver);
> +
> +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> +MODULE_LICENSE("GPL v2");
> 

WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Cheng-Yi Chiang <cychiang@chromium.org>, linux-kernel@vger.kernel.org
Cc: Taniya Das <tdas@codeaurora.org>,
	alsa-devel@alsa-project.org,
	Banajit Goswami <bgoswami@codeaurora.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rohit kumar <rohitkr@codeaurora.org>,
	Ajye Huang <ajye_huang@compal.corp-partner.google.com>,
	Patrick Lai <plai@codeaurora.org>,
	Ajit Pandey <ajitp@codeaurora.org>,
	Andy Gross <agross@kernel.org>,
	dgreid@chromium.org, devicetree@vger.kernel.org,
	tzungbi@chromium.org, Srinivasa Rao <srivasam@codeaurora.org>,
	Stephan Gerhold <stephan@gerhold.net>,
	linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	linux-arm-kernel@lists.infradead.org, dianders@chromium.org,
	Takashi Iwai <tiwai@suse.com>,
	xuyuqing@huaqin.corp-partner.google.com,
	Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v12 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration
Date: Tue, 27 Oct 2020 10:08:03 +0000	[thread overview]
Message-ID: <ee4b5e84-cb1e-b2d5-a309-0f03a4e643e2@linaro.org> (raw)
In-Reply-To: <20201027032234.1705835-3-cychiang@chromium.org>



On 27/10/2020 03:22, Cheng-Yi Chiang wrote:
> From: Ajit Pandey <ajitp@codeaurora.org>
> 
> Add new driver to register sound card on sc7180 trogdor board and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S interfaces.
> 
> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>

Looks good to me,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---
> Changes from v11 to v12
> - Machine driver:
>   - Use the definitaion of index LPASS_DP_RX in sc7180-lpass.h.
>   - Fix compatible string.
>   - Replace a comma with semicolon.
> 
>   sound/soc/qcom/Kconfig  |  12 ++
>   sound/soc/qcom/Makefile |   2 +
>   sound/soc/qcom/sc7180.c | 266 ++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 280 insertions(+)
>   create mode 100644 sound/soc/qcom/sc7180.c
> 
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index 484cad31da25..41cb08bd5588 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -138,4 +138,16 @@ config SND_SOC_SM8250
>   	  SM8250 SoC-based systems.
>   	  Say Y if you want to use audio device on this SoCs.
>   
> +config SND_SOC_SC7180
> +	tristate "SoC Machine driver for SC7180 boards"
> +	depends on I2C
> +	select SND_SOC_QCOM_COMMON
> +	select SND_SOC_LPASS_SC7180
> +	select SND_SOC_MAX98357A
> +	select SND_SOC_RT5682_I2C
> +	help
> +	  To add support for audio on Qualcomm Technologies Inc.
> +	  SC7180 SoC-based systems.
> +	  Say Y if you want to use audio device on this SoCs.
> +
>   endif #SND_SOC_QCOM
> diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
> index effa4b3f58fa..1600ae55bd34 100644
> --- a/sound/soc/qcom/Makefile
> +++ b/sound/soc/qcom/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SND_SOC_LPASS_SC7180) += snd-soc-lpass-sc7180.o
>   snd-soc-storm-objs := storm.o
>   snd-soc-apq8016-sbc-objs := apq8016_sbc.o
>   snd-soc-apq8096-objs := apq8096.o
> +snd-soc-sc7180-objs := sc7180.o
>   snd-soc-sdm845-objs := sdm845.o
>   snd-soc-sm8250-objs := sm8250.o
>   snd-soc-qcom-common-objs := common.o
> @@ -25,6 +26,7 @@ snd-soc-qcom-common-objs := common.o
>   obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
>   obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
>   obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
>   obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
>   obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
>   obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..b391f64c3a80
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,266 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> +//
> +// sc7180.c -- ALSA SoC Machine driver for SC7180
> +
> +#include <dt-bindings/sound/sc7180-lpass.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/soc.h>
> +#include <uapi/linux/input-event-codes.h>
> +
> +#include "../codecs/rt5682.h"
> +#include "common.h"
> +#include "lpass.h"
> +
> +#define DEFAULT_MCLK_RATE		19200000
> +#define RT5682_PLL1_FREQ (48000 * 512)
> +
> +#define DRIVER_NAME "SC7180"
> +
> +struct sc7180_snd_data {
> +	struct snd_soc_card card;
> +	u32 pri_mi2s_clk_count;
> +	struct snd_soc_jack hs_jack;
> +	struct snd_soc_jack hdmi_jack;
> +};
> +
> +static void sc7180_jack_free(struct snd_jack *jack)
> +{
> +	struct snd_soc_component *component = jack->private_data;
> +
> +	snd_soc_component_set_jack(component, NULL, NULL);
> +}
> +
> +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "Headset Jack",
> +			SND_JACK_HEADSET |
> +			SND_JACK_HEADPHONE |
> +			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> +			SND_JACK_BTN_2 | SND_JACK_BTN_3,
> +			&pdata->hs_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add Headset Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hs_jack.jack;
> +
> +	snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> +	snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> +	snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> +	snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> +
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> +}
> +
> +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "HDMI Jack",
> +			SND_JACK_LINEOUT,
> +			&pdata->hdmi_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add HDMI Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hdmi_jack.jack;
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> +}
> +
> +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		return sc7180_headset_init(rtd);
> +	case MI2S_SECONDARY:
> +		return 0;
> +	case LPASS_DP_RX:
> +		return sc7180_hdmi_init(rtd);
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	int ret;
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (++data->pri_mi2s_clk_count == 1) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       DEFAULT_MCLK_RATE,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +
> +		snd_soc_dai_set_fmt(codec_dai,
> +				    SND_SOC_DAIFMT_CBS_CFS |
> +				    SND_SOC_DAIFMT_NB_NF |
> +				    SND_SOC_DAIFMT_I2S);
> +
> +		/* Configure PLL1 for codec */
> +		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> +					  DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> +		if (ret) {
> +			dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> +			return ret;
> +		}
> +
> +		/* Configure sysclk for codec */
> +		ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> +					     RT5682_PLL1_FREQ,
> +					     SND_SOC_CLOCK_IN);
> +		if (ret)
> +			dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> +				ret);
> +
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case LPASS_DP_RX:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (--data->pri_mi2s_clk_count == 0) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       0,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case LPASS_DP_RX:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		break;
> +	}
> +}
> +
> +static const struct snd_soc_ops sc7180_ops = {
> +	.startup = sc7180_snd_startup,
> +	.shutdown = sc7180_snd_shutdown,
> +};
> +
> +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> +	SND_SOC_DAPM_HP("Headphone Jack", NULL),
> +	SND_SOC_DAPM_MIC("Headset Mic", NULL),
> +};
> +
> +static void sc7180_add_ops(struct snd_soc_card *card)
> +{
> +	struct snd_soc_dai_link *link;
> +	int i;
> +
> +	for_each_card_prelinks(card, i, link) {
> +		link->ops = &sc7180_ops;
> +		link->init = sc7180_init;
> +	}
> +}
> +
> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> +	struct snd_soc_card *card;
> +	struct sc7180_snd_data *data;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	/* Allocate the private data */
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	card = &data->card;
> +	snd_soc_card_set_drvdata(card, data);
> +
> +	card->owner = THIS_MODULE;
> +	card->driver_name = DRIVER_NAME;
> +	card->dev = dev;
> +	card->dapm_widgets = sc7180_snd_widgets;
> +	card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets);
> +
> +	ret = qcom_snd_parse_of(card);
> +	if (ret)
> +		return ret;
> +
> +	sc7180_add_ops(card);
> +
> +	return devm_snd_soc_register_card(dev, card);
> +}
> +
> +static const struct of_device_id sc7180_snd_device_id[]  = {
> +	{ .compatible = "google,sc7180-trogdor"},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> +
> +static struct platform_driver sc7180_snd_driver = {
> +	.probe = sc7180_snd_platform_probe,
> +	.driver = {
> +		.name = "msm-snd-sc7180",
> +		.of_match_table = sc7180_snd_device_id,
> +	},
> +};
> +module_platform_driver(sc7180_snd_driver);
> +
> +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> +MODULE_LICENSE("GPL v2");
> 

WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Cheng-Yi Chiang <cychiang@chromium.org>, linux-kernel@vger.kernel.org
Cc: Taniya Das <tdas@codeaurora.org>,
	alsa-devel@alsa-project.org,
	Banajit Goswami <bgoswami@codeaurora.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rohit kumar <rohitkr@codeaurora.org>,
	Ajye Huang <ajye_huang@compal.corp-partner.google.com>,
	Patrick Lai <plai@codeaurora.org>,
	Ajit Pandey <ajitp@codeaurora.org>,
	Andy Gross <agross@kernel.org>,
	dgreid@chromium.org, Jaroslav Kysela <perex@perex.cz>,
	devicetree@vger.kernel.org, tzungbi@chromium.org,
	Srinivasa Rao <srivasam@codeaurora.org>,
	Stephan Gerhold <stephan@gerhold.net>,
	linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	linux-arm-kernel@lists.infradead.org, dianders@chromium.org,
	Takashi Iwai <tiwai@suse.com>,
	xuyuqing@huaqin.corp-partner.google.com,
	Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v12 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration
Date: Tue, 27 Oct 2020 10:08:03 +0000	[thread overview]
Message-ID: <ee4b5e84-cb1e-b2d5-a309-0f03a4e643e2@linaro.org> (raw)
In-Reply-To: <20201027032234.1705835-3-cychiang@chromium.org>



On 27/10/2020 03:22, Cheng-Yi Chiang wrote:
> From: Ajit Pandey <ajitp@codeaurora.org>
> 
> Add new driver to register sound card on sc7180 trogdor board and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S interfaces.
> 
> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>

Looks good to me,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---
> Changes from v11 to v12
> - Machine driver:
>   - Use the definitaion of index LPASS_DP_RX in sc7180-lpass.h.
>   - Fix compatible string.
>   - Replace a comma with semicolon.
> 
>   sound/soc/qcom/Kconfig  |  12 ++
>   sound/soc/qcom/Makefile |   2 +
>   sound/soc/qcom/sc7180.c | 266 ++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 280 insertions(+)
>   create mode 100644 sound/soc/qcom/sc7180.c
> 
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index 484cad31da25..41cb08bd5588 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -138,4 +138,16 @@ config SND_SOC_SM8250
>   	  SM8250 SoC-based systems.
>   	  Say Y if you want to use audio device on this SoCs.
>   
> +config SND_SOC_SC7180
> +	tristate "SoC Machine driver for SC7180 boards"
> +	depends on I2C
> +	select SND_SOC_QCOM_COMMON
> +	select SND_SOC_LPASS_SC7180
> +	select SND_SOC_MAX98357A
> +	select SND_SOC_RT5682_I2C
> +	help
> +	  To add support for audio on Qualcomm Technologies Inc.
> +	  SC7180 SoC-based systems.
> +	  Say Y if you want to use audio device on this SoCs.
> +
>   endif #SND_SOC_QCOM
> diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
> index effa4b3f58fa..1600ae55bd34 100644
> --- a/sound/soc/qcom/Makefile
> +++ b/sound/soc/qcom/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SND_SOC_LPASS_SC7180) += snd-soc-lpass-sc7180.o
>   snd-soc-storm-objs := storm.o
>   snd-soc-apq8016-sbc-objs := apq8016_sbc.o
>   snd-soc-apq8096-objs := apq8096.o
> +snd-soc-sc7180-objs := sc7180.o
>   snd-soc-sdm845-objs := sdm845.o
>   snd-soc-sm8250-objs := sm8250.o
>   snd-soc-qcom-common-objs := common.o
> @@ -25,6 +26,7 @@ snd-soc-qcom-common-objs := common.o
>   obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
>   obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
>   obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
>   obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
>   obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
>   obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..b391f64c3a80
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,266 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> +//
> +// sc7180.c -- ALSA SoC Machine driver for SC7180
> +
> +#include <dt-bindings/sound/sc7180-lpass.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/soc.h>
> +#include <uapi/linux/input-event-codes.h>
> +
> +#include "../codecs/rt5682.h"
> +#include "common.h"
> +#include "lpass.h"
> +
> +#define DEFAULT_MCLK_RATE		19200000
> +#define RT5682_PLL1_FREQ (48000 * 512)
> +
> +#define DRIVER_NAME "SC7180"
> +
> +struct sc7180_snd_data {
> +	struct snd_soc_card card;
> +	u32 pri_mi2s_clk_count;
> +	struct snd_soc_jack hs_jack;
> +	struct snd_soc_jack hdmi_jack;
> +};
> +
> +static void sc7180_jack_free(struct snd_jack *jack)
> +{
> +	struct snd_soc_component *component = jack->private_data;
> +
> +	snd_soc_component_set_jack(component, NULL, NULL);
> +}
> +
> +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "Headset Jack",
> +			SND_JACK_HEADSET |
> +			SND_JACK_HEADPHONE |
> +			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> +			SND_JACK_BTN_2 | SND_JACK_BTN_3,
> +			&pdata->hs_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add Headset Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hs_jack.jack;
> +
> +	snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> +	snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> +	snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> +	snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> +
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> +}
> +
> +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_component *component = codec_dai->component;
> +	struct snd_jack *jack;
> +	int rval;
> +
> +	rval = snd_soc_card_jack_new(
> +			card, "HDMI Jack",
> +			SND_JACK_LINEOUT,
> +			&pdata->hdmi_jack, NULL, 0);
> +
> +	if (rval < 0) {
> +		dev_err(card->dev, "Unable to add HDMI Jack\n");
> +		return rval;
> +	}
> +
> +	jack = pdata->hdmi_jack.jack;
> +	jack->private_data = component;
> +	jack->private_free = sc7180_jack_free;
> +
> +	return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> +}
> +
> +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		return sc7180_headset_init(rtd);
> +	case MI2S_SECONDARY:
> +		return 0;
> +	case LPASS_DP_RX:
> +		return sc7180_hdmi_init(rtd);
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	int ret;
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (++data->pri_mi2s_clk_count == 1) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       DEFAULT_MCLK_RATE,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +
> +		snd_soc_dai_set_fmt(codec_dai,
> +				    SND_SOC_DAIFMT_CBS_CFS |
> +				    SND_SOC_DAIFMT_NB_NF |
> +				    SND_SOC_DAIFMT_I2S);
> +
> +		/* Configure PLL1 for codec */
> +		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> +					  DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> +		if (ret) {
> +			dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> +			return ret;
> +		}
> +
> +		/* Configure sysclk for codec */
> +		ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> +					     RT5682_PLL1_FREQ,
> +					     SND_SOC_CLOCK_IN);
> +		if (ret)
> +			dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> +				ret);
> +
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case LPASS_DP_RX:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> +	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
> +		if (--data->pri_mi2s_clk_count == 0) {
> +			snd_soc_dai_set_sysclk(cpu_dai,
> +					       LPASS_MCLK0,
> +					       0,
> +					       SNDRV_PCM_STREAM_PLAYBACK);
> +		}
> +		break;
> +	case MI2S_SECONDARY:
> +		break;
> +	case LPASS_DP_RX:
> +		break;
> +	default:
> +		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> +			cpu_dai->id);
> +		break;
> +	}
> +}
> +
> +static const struct snd_soc_ops sc7180_ops = {
> +	.startup = sc7180_snd_startup,
> +	.shutdown = sc7180_snd_shutdown,
> +};
> +
> +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> +	SND_SOC_DAPM_HP("Headphone Jack", NULL),
> +	SND_SOC_DAPM_MIC("Headset Mic", NULL),
> +};
> +
> +static void sc7180_add_ops(struct snd_soc_card *card)
> +{
> +	struct snd_soc_dai_link *link;
> +	int i;
> +
> +	for_each_card_prelinks(card, i, link) {
> +		link->ops = &sc7180_ops;
> +		link->init = sc7180_init;
> +	}
> +}
> +
> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> +	struct snd_soc_card *card;
> +	struct sc7180_snd_data *data;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	/* Allocate the private data */
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	card = &data->card;
> +	snd_soc_card_set_drvdata(card, data);
> +
> +	card->owner = THIS_MODULE;
> +	card->driver_name = DRIVER_NAME;
> +	card->dev = dev;
> +	card->dapm_widgets = sc7180_snd_widgets;
> +	card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets);
> +
> +	ret = qcom_snd_parse_of(card);
> +	if (ret)
> +		return ret;
> +
> +	sc7180_add_ops(card);
> +
> +	return devm_snd_soc_register_card(dev, card);
> +}
> +
> +static const struct of_device_id sc7180_snd_device_id[]  = {
> +	{ .compatible = "google,sc7180-trogdor"},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> +
> +static struct platform_driver sc7180_snd_driver = {
> +	.probe = sc7180_snd_platform_probe,
> +	.driver = {
> +		.name = "msm-snd-sc7180",
> +		.of_match_table = sc7180_snd_device_id,
> +	},
> +};
> +module_platform_driver(sc7180_snd_driver);
> +
> +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> +MODULE_LICENSE("GPL v2");
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-10-27 10:08 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-27  3:22 [PATCH v12 0/2] Add documentation and machine driver for SC7180 sound card Cheng-Yi Chiang
2020-10-27  3:22 ` Cheng-Yi Chiang
2020-10-27  3:22 ` Cheng-Yi Chiang
2020-10-27  3:22 ` [PATCH v12 1/2] ASoC: google: dt-bindings: Add sc7180-trogdor machine bindings Cheng-Yi Chiang
2020-10-27  3:22   ` Cheng-Yi Chiang
2020-10-27  3:22   ` Cheng-Yi Chiang
2020-10-27 10:07   ` Srinivas Kandagatla
2020-10-27 10:07     ` Srinivas Kandagatla
2020-10-27 10:07     ` Srinivas Kandagatla
2020-10-27  3:22 ` [PATCH v12 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang
2020-10-27  3:22   ` Cheng-Yi Chiang
2020-10-27  3:22   ` Cheng-Yi Chiang
2020-10-27 10:08   ` Srinivas Kandagatla [this message]
2020-10-27 10:08     ` Srinivas Kandagatla
2020-10-27 10:08     ` Srinivas Kandagatla
2020-10-27 20:39 ` [PATCH v12 0/2] Add documentation and machine driver for SC7180 sound card Mark Brown
2020-10-27 20:39   ` Mark Brown
2020-10-27 20:39   ` Mark Brown
2020-12-29 20:15 ` patchwork-bot+linux-arm-msm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ee4b5e84-cb1e-b2d5-a309-0f03a4e643e2@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=agross@kernel.org \
    --cc=ajitp@codeaurora.org \
    --cc=ajye_huang@compal.corp-partner.google.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=cychiang@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dgreid@chromium.org \
    --cc=dianders@chromium.org \
    --cc=heiko@sntech.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=perex@perex.cz \
    --cc=plai@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rohitkr@codeaurora.org \
    --cc=srivasam@codeaurora.org \
    --cc=stephan@gerhold.net \
    --cc=tdas@codeaurora.org \
    --cc=tiwai@suse.com \
    --cc=tzungbi@chromium.org \
    --cc=xuyuqing@huaqin.corp-partner.google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.