From: Eddie James <eajames@linux.ibm.com>
To: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>, joel@jms.id.au
Cc: devicetree@vger.kernel.org
Subject: Re: [PATCH 1/2] rainier: Add leds that are off 9551 on Operator Panel
Date: Tue, 28 Jul 2020 15:45:35 -0500 [thread overview]
Message-ID: <ef560a40-03ef-d77b-68d4-5f8062688a82@linux.ibm.com> (raw)
In-Reply-To: <1595944770-18106-1-git-send-email-vishwa@linux.vnet.ibm.com>
On 7/28/20 8:59 AM, Vishwanatha Subbanna wrote:
> These are LEDs that are controlled by 9551
Reviewed-by: Eddie James <eajames@linux.ibm.com>
>
> Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 82 ++++++++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 0b5c6cc..ecbce50 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -69,6 +69,38 @@
> };
> };
>
> + leds {
> + compatible = "gpio-leds";
> +
> + /* System ID LED that is at front on Op Panel */
> + front-sys-id0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* System Attention Indicator ID LED that is at front on Op Panel */
> + front-check-log0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* Enclosure Fault LED that is at front on Op Panel */
> + front-enc-fault1 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* System PowerOn LED that is at front on Op Panel */
> + front-sys-pwron0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> };
>
> &gpio0 {
> @@ -514,6 +546,56 @@
> };
> };
>
> + pca1: pca9551@60 {
> + compatible = "nxp,pca9551";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> dps: dps310@76 {
> compatible = "infineon,dps310";
> reg = <0x76>;
next prev parent reply other threads:[~2020-07-28 20:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-28 13:59 [PATCH 1/2] rainier: Add leds that are off 9551 on Operator Panel Vishwanatha Subbanna
2020-07-28 20:45 ` Eddie James [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-07-27 12:40 vishwanatha subbanna
2020-07-27 12:40 ` vishwanatha subbanna
2020-07-27 21:19 ` Eddie James
2020-07-27 23:23 ` Joel Stanley
2020-07-27 23:23 ` Joel Stanley
2020-07-09 11:15 Vishwanatha Subbanna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ef560a40-03ef-d77b-68d4-5f8062688a82@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=vishwa@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.