* [PATCH v3] staging: iio: adis16201: Move header file content to source file
@ 2017-02-28 19:49 simran singhal
2017-03-02 19:12 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: simran singhal @ 2017-02-28 19:49 UTC (permalink / raw)
To: lars
Cc: Michael.Hennerich, jic23, knaack.h, pmeerw, gregkh, linux-kernel,
linux-iio, devel, outreachy-kernel
The contents of the header file are used only by this single
source file. Move content into .c and remove .h.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
---
v3:
-Removing endif as it is not needed
-Changing subject
drivers/staging/iio/accel/adis16201.h | 144 -----------------------------
drivers/staging/iio/accel/adis16201_core.c | 140 +++++++++++++++++++++++++++-
2 files changed, 139 insertions(+), 145 deletions(-)
delete mode 100644 drivers/staging/iio/accel/adis16201.h
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
deleted file mode 100644
index 64844ad..0000000
--- a/drivers/staging/iio/accel/adis16201.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef SPI_ADIS16201_H_
-#define SPI_ADIS16201_H_
-
-#define ADIS16201_STARTUP_DELAY 220 /* ms */
-
-/* Flash memory write count */
-#define ADIS16201_FLASH_CNT 0x00
-
-/* Output, power supply */
-#define ADIS16201_SUPPLY_OUT 0x02
-
-/* Output, x-axis accelerometer */
-#define ADIS16201_XACCL_OUT 0x04
-
-/* Output, y-axis accelerometer */
-#define ADIS16201_YACCL_OUT 0x06
-
-/* Output, auxiliary ADC input */
-#define ADIS16201_AUX_ADC 0x08
-
-/* Output, temperature */
-#define ADIS16201_TEMP_OUT 0x0A
-
-/* Output, x-axis inclination */
-#define ADIS16201_XINCL_OUT 0x0C
-
-/* Output, y-axis inclination */
-#define ADIS16201_YINCL_OUT 0x0E
-
-/* Calibration, x-axis acceleration offset */
-#define ADIS16201_XACCL_OFFS 0x10
-
-/* Calibration, y-axis acceleration offset */
-#define ADIS16201_YACCL_OFFS 0x12
-
-/* x-axis acceleration scale factor */
-#define ADIS16201_XACCL_SCALE 0x14
-
-/* y-axis acceleration scale factor */
-#define ADIS16201_YACCL_SCALE 0x16
-
-/* Calibration, x-axis inclination offset */
-#define ADIS16201_XINCL_OFFS 0x18
-
-/* Calibration, y-axis inclination offset */
-#define ADIS16201_YINCL_OFFS 0x1A
-
-/* x-axis inclination scale factor */
-#define ADIS16201_XINCL_SCALE 0x1C
-
-/* y-axis inclination scale factor */
-#define ADIS16201_YINCL_SCALE 0x1E
-
-/* Alarm 1 amplitude threshold */
-#define ADIS16201_ALM_MAG1 0x20
-
-/* Alarm 2 amplitude threshold */
-#define ADIS16201_ALM_MAG2 0x22
-
-/* Alarm 1, sample period */
-#define ADIS16201_ALM_SMPL1 0x24
-
-/* Alarm 2, sample period */
-#define ADIS16201_ALM_SMPL2 0x26
-
-/* Alarm control */
-#define ADIS16201_ALM_CTRL 0x28
-
-/* Auxiliary DAC data */
-#define ADIS16201_AUX_DAC 0x30
-
-/* General-purpose digital input/output control */
-#define ADIS16201_GPIO_CTRL 0x32
-
-/* Miscellaneous control */
-#define ADIS16201_MSC_CTRL 0x34
-
-/* Internal sample period (rate) control */
-#define ADIS16201_SMPL_PRD 0x36
-
-/* Operation, filter configuration */
-#define ADIS16201_AVG_CNT 0x38
-
-/* Operation, sleep mode control */
-#define ADIS16201_SLP_CNT 0x3A
-
-/* Diagnostics, system status register */
-#define ADIS16201_DIAG_STAT 0x3C
-
-/* Operation, system command register */
-#define ADIS16201_GLOB_CMD 0x3E
-
-/* MSC_CTRL */
-
-/* Self-test enable */
-#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
-
-/* Data-ready enable: 1 = enabled, 0 = disabled */
-#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
-
-/* Data-ready polarity: 1 = active high, 0 = active low */
-#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
-
-/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
-#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
-
-/* DIAG_STAT */
-
-/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
-
-/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
-
-/* SPI communications failure */
-#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
-
-/* Flash update failure */
-#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
-
-/* Power supply above 3.625 V */
-#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
-
-/* Power supply below 3.15 V */
-#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
-
-/* GLOB_CMD */
-
-#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
-#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
-
-#define ADIS16201_ERROR_ACTIVE BIT(14)
-
-enum adis16201_scan {
- ADIS16201_SCAN_ACC_X,
- ADIS16201_SCAN_ACC_Y,
- ADIS16201_SCAN_INCLI_X,
- ADIS16201_SCAN_INCLI_Y,
- ADIS16201_SCAN_SUPPLY,
- ADIS16201_SCAN_AUX_ADC,
- ADIS16201_SCAN_TEMP,
-};
-
-#endif /* SPI_ADIS16201_H_ */
diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
index 7963d4a..d6c8658 100644
--- a/drivers/staging/iio/accel/adis16201_core.c
+++ b/drivers/staging/iio/accel/adis16201_core.c
@@ -20,7 +20,145 @@
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>
-#include "adis16201.h"
+#define ADIS16201_STARTUP_DELAY 220 /* ms */
+
+/* Flash memory write count */
+#define ADIS16201_FLASH_CNT 0x00
+
+/* Output, power supply */
+#define ADIS16201_SUPPLY_OUT 0x02
+
+/* Output, x-axis accelerometer */
+#define ADIS16201_XACCL_OUT 0x04
+
+/* Output, y-axis accelerometer */
+#define ADIS16201_YACCL_OUT 0x06
+
+/* Output, auxiliary ADC input */
+#define ADIS16201_AUX_ADC 0x08
+
+/* Output, temperature */
+#define ADIS16201_TEMP_OUT 0x0A
+
+/* Output, x-axis inclination */
+#define ADIS16201_XINCL_OUT 0x0C
+
+/* Output, y-axis inclination */
+#define ADIS16201_YINCL_OUT 0x0E
+
+/* Calibration, x-axis acceleration offset */
+#define ADIS16201_XACCL_OFFS 0x10
+
+/* Calibration, y-axis acceleration offset */
+#define ADIS16201_YACCL_OFFS 0x12
+
+/* x-axis acceleration scale factor */
+#define ADIS16201_XACCL_SCALE 0x14
+
+/* y-axis acceleration scale factor */
+#define ADIS16201_YACCL_SCALE 0x16
+
+/* Calibration, x-axis inclination offset */
+#define ADIS16201_XINCL_OFFS 0x18
+
+/* Calibration, y-axis inclination offset */
+#define ADIS16201_YINCL_OFFS 0x1A
+
+/* x-axis inclination scale factor */
+#define ADIS16201_XINCL_SCALE 0x1C
+
+/* y-axis inclination scale factor */
+#define ADIS16201_YINCL_SCALE 0x1E
+
+/* Alarm 1 amplitude threshold */
+#define ADIS16201_ALM_MAG1 0x20
+
+/* Alarm 2 amplitude threshold */
+#define ADIS16201_ALM_MAG2 0x22
+
+/* Alarm 1, sample period */
+#define ADIS16201_ALM_SMPL1 0x24
+
+/* Alarm 2, sample period */
+#define ADIS16201_ALM_SMPL2 0x26
+
+/* Alarm control */
+#define ADIS16201_ALM_CTRL 0x28
+
+/* Auxiliary DAC data */
+#define ADIS16201_AUX_DAC 0x30
+
+/* General-purpose digital input/output control */
+#define ADIS16201_GPIO_CTRL 0x32
+
+/* Miscellaneous control */
+#define ADIS16201_MSC_CTRL 0x34
+
+/* Internal sample period (rate) control */
+#define ADIS16201_SMPL_PRD 0x36
+
+/* Operation, filter configuration */
+#define ADIS16201_AVG_CNT 0x38
+
+/* Operation, sleep mode control */
+#define ADIS16201_SLP_CNT 0x3A
+
+/* Diagnostics, system status register */
+#define ADIS16201_DIAG_STAT 0x3C
+
+/* Operation, system command register */
+#define ADIS16201_GLOB_CMD 0x3E
+
+/* MSC_CTRL */
+
+/* Self-test enable */
+#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
+
+/* Data-ready enable: 1 = enabled, 0 = disabled */
+#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
+
+/* Data-ready polarity: 1 = active high, 0 = active low */
+#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
+
+/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
+#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
+
+/* DIAG_STAT */
+
+/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
+
+/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
+
+/* SPI communications failure */
+#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
+
+/* Flash update failure */
+#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
+
+/* Power supply above 3.625 V */
+#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
+
+/* Power supply below 3.15 V */
+#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
+
+/* GLOB_CMD */
+
+#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
+#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
+
+#define ADIS16201_ERROR_ACTIVE BIT(14)
+
+enum adis16201_scan {
+ ADIS16201_SCAN_ACC_X,
+ ADIS16201_SCAN_ACC_Y,
+ ADIS16201_SCAN_INCLI_X,
+ ADIS16201_SCAN_INCLI_Y,
+ ADIS16201_SCAN_SUPPLY,
+ ADIS16201_SCAN_AUX_ADC,
+ ADIS16201_SCAN_TEMP,
+};
static const u8 adis16201_addresses[] = {
[ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS,
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] staging: iio: adis16201: Move header file content to source file
2017-02-28 19:49 [PATCH v3] staging: iio: adis16201: Move header file content to source file simran singhal
@ 2017-03-02 19:12 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2017-03-02 19:12 UTC (permalink / raw)
To: simran singhal, lars
Cc: Michael.Hennerich, knaack.h, pmeerw, gregkh, linux-kernel,
linux-iio, devel, outreachy-kernel
On 28/02/17 19:49, simran singhal wrote:
> The contents of the header file are used only by this single
> source file. Move content into .c and remove .h.
>
> Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Hi Simran,
Good follow up but as I'd already applied it I made the mods directly to
the original patch. Please check the new contents of the testing branch
of iio.git to make sure I didn't mess it up!
Thanks,
Jonathan
> ---
> v3:
> -Removing endif as it is not needed
> -Changing subject
>
> drivers/staging/iio/accel/adis16201.h | 144 -----------------------------
> drivers/staging/iio/accel/adis16201_core.c | 140 +++++++++++++++++++++++++++-
> 2 files changed, 139 insertions(+), 145 deletions(-)
> delete mode 100644 drivers/staging/iio/accel/adis16201.h
>
> diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
> deleted file mode 100644
> index 64844ad..0000000
> --- a/drivers/staging/iio/accel/adis16201.h
> +++ /dev/null
> @@ -1,144 +0,0 @@
> -#ifndef SPI_ADIS16201_H_
> -#define SPI_ADIS16201_H_
> -
> -#define ADIS16201_STARTUP_DELAY 220 /* ms */
> -
> -/* Flash memory write count */
> -#define ADIS16201_FLASH_CNT 0x00
> -
> -/* Output, power supply */
> -#define ADIS16201_SUPPLY_OUT 0x02
> -
> -/* Output, x-axis accelerometer */
> -#define ADIS16201_XACCL_OUT 0x04
> -
> -/* Output, y-axis accelerometer */
> -#define ADIS16201_YACCL_OUT 0x06
> -
> -/* Output, auxiliary ADC input */
> -#define ADIS16201_AUX_ADC 0x08
> -
> -/* Output, temperature */
> -#define ADIS16201_TEMP_OUT 0x0A
> -
> -/* Output, x-axis inclination */
> -#define ADIS16201_XINCL_OUT 0x0C
> -
> -/* Output, y-axis inclination */
> -#define ADIS16201_YINCL_OUT 0x0E
> -
> -/* Calibration, x-axis acceleration offset */
> -#define ADIS16201_XACCL_OFFS 0x10
> -
> -/* Calibration, y-axis acceleration offset */
> -#define ADIS16201_YACCL_OFFS 0x12
> -
> -/* x-axis acceleration scale factor */
> -#define ADIS16201_XACCL_SCALE 0x14
> -
> -/* y-axis acceleration scale factor */
> -#define ADIS16201_YACCL_SCALE 0x16
> -
> -/* Calibration, x-axis inclination offset */
> -#define ADIS16201_XINCL_OFFS 0x18
> -
> -/* Calibration, y-axis inclination offset */
> -#define ADIS16201_YINCL_OFFS 0x1A
> -
> -/* x-axis inclination scale factor */
> -#define ADIS16201_XINCL_SCALE 0x1C
> -
> -/* y-axis inclination scale factor */
> -#define ADIS16201_YINCL_SCALE 0x1E
> -
> -/* Alarm 1 amplitude threshold */
> -#define ADIS16201_ALM_MAG1 0x20
> -
> -/* Alarm 2 amplitude threshold */
> -#define ADIS16201_ALM_MAG2 0x22
> -
> -/* Alarm 1, sample period */
> -#define ADIS16201_ALM_SMPL1 0x24
> -
> -/* Alarm 2, sample period */
> -#define ADIS16201_ALM_SMPL2 0x26
> -
> -/* Alarm control */
> -#define ADIS16201_ALM_CTRL 0x28
> -
> -/* Auxiliary DAC data */
> -#define ADIS16201_AUX_DAC 0x30
> -
> -/* General-purpose digital input/output control */
> -#define ADIS16201_GPIO_CTRL 0x32
> -
> -/* Miscellaneous control */
> -#define ADIS16201_MSC_CTRL 0x34
> -
> -/* Internal sample period (rate) control */
> -#define ADIS16201_SMPL_PRD 0x36
> -
> -/* Operation, filter configuration */
> -#define ADIS16201_AVG_CNT 0x38
> -
> -/* Operation, sleep mode control */
> -#define ADIS16201_SLP_CNT 0x3A
> -
> -/* Diagnostics, system status register */
> -#define ADIS16201_DIAG_STAT 0x3C
> -
> -/* Operation, system command register */
> -#define ADIS16201_GLOB_CMD 0x3E
> -
> -/* MSC_CTRL */
> -
> -/* Self-test enable */
> -#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
> -
> -/* Data-ready enable: 1 = enabled, 0 = disabled */
> -#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
> -
> -/* Data-ready polarity: 1 = active high, 0 = active low */
> -#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
> -
> -/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
> -#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
> -
> -/* DIAG_STAT */
> -
> -/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
> -#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
> -
> -/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
> -#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
> -
> -/* SPI communications failure */
> -#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
> -
> -/* Flash update failure */
> -#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
> -
> -/* Power supply above 3.625 V */
> -#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
> -
> -/* Power supply below 3.15 V */
> -#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
> -
> -/* GLOB_CMD */
> -
> -#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
> -#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
> -
> -#define ADIS16201_ERROR_ACTIVE BIT(14)
> -
> -enum adis16201_scan {
> - ADIS16201_SCAN_ACC_X,
> - ADIS16201_SCAN_ACC_Y,
> - ADIS16201_SCAN_INCLI_X,
> - ADIS16201_SCAN_INCLI_Y,
> - ADIS16201_SCAN_SUPPLY,
> - ADIS16201_SCAN_AUX_ADC,
> - ADIS16201_SCAN_TEMP,
> -};
> -
> -#endif /* SPI_ADIS16201_H_ */
> diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
> index 7963d4a..d6c8658 100644
> --- a/drivers/staging/iio/accel/adis16201_core.c
> +++ b/drivers/staging/iio/accel/adis16201_core.c
> @@ -20,7 +20,145 @@
> #include <linux/iio/buffer.h>
> #include <linux/iio/imu/adis.h>
>
> -#include "adis16201.h"
> +#define ADIS16201_STARTUP_DELAY 220 /* ms */
> +
> +/* Flash memory write count */
> +#define ADIS16201_FLASH_CNT 0x00
> +
> +/* Output, power supply */
> +#define ADIS16201_SUPPLY_OUT 0x02
> +
> +/* Output, x-axis accelerometer */
> +#define ADIS16201_XACCL_OUT 0x04
> +
> +/* Output, y-axis accelerometer */
> +#define ADIS16201_YACCL_OUT 0x06
> +
> +/* Output, auxiliary ADC input */
> +#define ADIS16201_AUX_ADC 0x08
> +
> +/* Output, temperature */
> +#define ADIS16201_TEMP_OUT 0x0A
> +
> +/* Output, x-axis inclination */
> +#define ADIS16201_XINCL_OUT 0x0C
> +
> +/* Output, y-axis inclination */
> +#define ADIS16201_YINCL_OUT 0x0E
> +
> +/* Calibration, x-axis acceleration offset */
> +#define ADIS16201_XACCL_OFFS 0x10
> +
> +/* Calibration, y-axis acceleration offset */
> +#define ADIS16201_YACCL_OFFS 0x12
> +
> +/* x-axis acceleration scale factor */
> +#define ADIS16201_XACCL_SCALE 0x14
> +
> +/* y-axis acceleration scale factor */
> +#define ADIS16201_YACCL_SCALE 0x16
> +
> +/* Calibration, x-axis inclination offset */
> +#define ADIS16201_XINCL_OFFS 0x18
> +
> +/* Calibration, y-axis inclination offset */
> +#define ADIS16201_YINCL_OFFS 0x1A
> +
> +/* x-axis inclination scale factor */
> +#define ADIS16201_XINCL_SCALE 0x1C
> +
> +/* y-axis inclination scale factor */
> +#define ADIS16201_YINCL_SCALE 0x1E
> +
> +/* Alarm 1 amplitude threshold */
> +#define ADIS16201_ALM_MAG1 0x20
> +
> +/* Alarm 2 amplitude threshold */
> +#define ADIS16201_ALM_MAG2 0x22
> +
> +/* Alarm 1, sample period */
> +#define ADIS16201_ALM_SMPL1 0x24
> +
> +/* Alarm 2, sample period */
> +#define ADIS16201_ALM_SMPL2 0x26
> +
> +/* Alarm control */
> +#define ADIS16201_ALM_CTRL 0x28
> +
> +/* Auxiliary DAC data */
> +#define ADIS16201_AUX_DAC 0x30
> +
> +/* General-purpose digital input/output control */
> +#define ADIS16201_GPIO_CTRL 0x32
> +
> +/* Miscellaneous control */
> +#define ADIS16201_MSC_CTRL 0x34
> +
> +/* Internal sample period (rate) control */
> +#define ADIS16201_SMPL_PRD 0x36
> +
> +/* Operation, filter configuration */
> +#define ADIS16201_AVG_CNT 0x38
> +
> +/* Operation, sleep mode control */
> +#define ADIS16201_SLP_CNT 0x3A
> +
> +/* Diagnostics, system status register */
> +#define ADIS16201_DIAG_STAT 0x3C
> +
> +/* Operation, system command register */
> +#define ADIS16201_GLOB_CMD 0x3E
> +
> +/* MSC_CTRL */
> +
> +/* Self-test enable */
> +#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
> +
> +/* Data-ready enable: 1 = enabled, 0 = disabled */
> +#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
> +
> +/* Data-ready polarity: 1 = active high, 0 = active low */
> +#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
> +
> +/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
> +#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
> +
> +/* DIAG_STAT */
> +
> +/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
> +#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
> +
> +/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
> +#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
> +
> +/* SPI communications failure */
> +#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
> +
> +/* Flash update failure */
> +#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
> +
> +/* Power supply above 3.625 V */
> +#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
> +
> +/* Power supply below 3.15 V */
> +#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
> +
> +/* GLOB_CMD */
> +
> +#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
> +#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
> +
> +#define ADIS16201_ERROR_ACTIVE BIT(14)
> +
> +enum adis16201_scan {
> + ADIS16201_SCAN_ACC_X,
> + ADIS16201_SCAN_ACC_Y,
> + ADIS16201_SCAN_INCLI_X,
> + ADIS16201_SCAN_INCLI_Y,
> + ADIS16201_SCAN_SUPPLY,
> + ADIS16201_SCAN_AUX_ADC,
> + ADIS16201_SCAN_TEMP,
> +};
>
> static const u8 adis16201_addresses[] = {
> [ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS,
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-02 19:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-28 19:49 [PATCH v3] staging: iio: adis16201: Move header file content to source file simran singhal
2017-03-02 19:12 ` Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.