* [PATCH 00/10] Add minimal boot support for IPQ5332
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
The IPQ5332 is Qualcomm's 802.11ax SoC for Routers, Gateways and
Access Points.
This series adds minimal board boot support for ipq5332-mi01.2 board.
Also, this series depends on the below patch
https://lore.kernel.org/linux-arm-msm/20230120082631.22053-1-quic_kathirav@quicinc.com/
Kathiravan T (10):
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
pinctrl: qcom: Introduce IPQ5332 TLMM driver
clk: qcom: Add STROMER PLUS PLL type for IPQ5332
dt-bindings: clock: Add Qualcomm IPQ5332 GCC
clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
dt-bindings: qcom: add ipq5332 boards
dt-bindings: firmware: document IPQ5332 SCM
dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
arm64: defconfig: Enable IPQ5332 SoC base configs
.../devicetree/bindings/arm/qcom.yaml | 7 +
.../bindings/clock/qcom,ipq5332-gcc.yaml | 55 +
.../bindings/firmware/qcom,scm.yaml | 1 +
.../devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
.../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-alpha-pll.c | 11 +
drivers/clk/qcom/clk-alpha-pll.h | 1 +
drivers/clk/qcom/gcc-ipq5332.c | 3954 +++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq5332.c | 1008 +++++
include/dt-bindings/clock/qcom,gcc-ipq5332.h | 359 ++
18 files changed, 5897 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5332.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5332.h
--
2.34.1
^ permalink raw reply [flat|nested] 67+ messages in thread
* [PATCH 00/10] Add minimal boot support for IPQ5332
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
The IPQ5332 is Qualcomm's 802.11ax SoC for Routers, Gateways and
Access Points.
This series adds minimal board boot support for ipq5332-mi01.2 board.
Also, this series depends on the below patch
https://lore.kernel.org/linux-arm-msm/20230120082631.22053-1-quic_kathirav@quicinc.com/
Kathiravan T (10):
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
pinctrl: qcom: Introduce IPQ5332 TLMM driver
clk: qcom: Add STROMER PLUS PLL type for IPQ5332
dt-bindings: clock: Add Qualcomm IPQ5332 GCC
clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
dt-bindings: qcom: add ipq5332 boards
dt-bindings: firmware: document IPQ5332 SCM
dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
arm64: defconfig: Enable IPQ5332 SoC base configs
.../devicetree/bindings/arm/qcom.yaml | 7 +
.../bindings/clock/qcom,ipq5332-gcc.yaml | 55 +
.../bindings/firmware/qcom,scm.yaml | 1 +
.../devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
.../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-alpha-pll.c | 11 +
drivers/clk/qcom/clk-alpha-pll.h | 1 +
drivers/clk/qcom/gcc-ipq5332.c | 3954 +++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq5332.c | 1008 +++++
include/dt-bindings/clock/qcom,gcc-ipq5332.h | 359 ++
18 files changed, 5897 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5332.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5332.h
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add device tree bindings for IPQ5332 TLMM block.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
.../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 ++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
new file mode 100644
index 000000000000..d101ee04b8b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5332 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq5332-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 27
+
+ gpio-line-names:
+ maxItems: 53
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq5332-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
+ audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
+ blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
+ blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
+ blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
+ core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
+ cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
+ lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
+ pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake,
+ pll_test, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, pwm0,
+ pwm1, pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+ qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+ qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+ qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+ qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+ qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0,
+ rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci0, wci1, wci10,
+ wci11, wci2, wci3, wci4, wci5, wci6, wci7, wci8, wci9, wsi_clk,
+ wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem0, xfem1, xfem2,
+ xfem3, xfem4, xfem5, xfem6, xfem7 ]
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ drive-strength: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5332-tlmm";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ gpio-ranges = <&tlmm 0 0 53>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+
+ serial0-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp0_uart0";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add device tree bindings for IPQ5332 TLMM block.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
.../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 ++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
new file mode 100644
index 000000000000..d101ee04b8b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5332 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq5332-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 27
+
+ gpio-line-names:
+ maxItems: 53
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq5332-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
+ audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
+ blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
+ blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
+ blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
+ core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
+ cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
+ lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
+ pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake,
+ pll_test, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, pwm0,
+ pwm1, pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+ qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+ qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+ qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+ qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+ qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0,
+ rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci0, wci1, wci10,
+ wci11, wci2, wci3, wci4, wci5, wci6, wci7, wci8, wci9, wsi_clk,
+ wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem0, xfem1, xfem2,
+ xfem3, xfem4, xfem5, xfem6, xfem7 ]
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ drive-strength: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5332-tlmm";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ gpio-ranges = <&tlmm 0 0 53>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+
+ serial0-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp0_uart0";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 02/10] pinctrl: qcom: Introduce IPQ5332 TLMM driver
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
The IPQ5332 SoC comes with a TLMM block, like all other Qualcomm
platforms, so add a driver for it.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq5332.c | 1008 ++++++++++++++++++++++++
3 files changed, 1019 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5332.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 1378ddca084f..ad18cdf85ff8 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -48,6 +48,16 @@ config PINCTRL_IPQ8064
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm TLMM block found in the Qualcomm IPQ8064 platform.
+config PINCTRL_IPQ5332
+ tristate "Qualcomm Technologies Inc IPQ5332 pin controller driver"
+ depends on OF
+ depends on ARM64 || COMPILE_TEST
+ depends on PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm Technologies Inc TLMM block found on the Qualcomm
+ Technologies Inc IPQ5332 platform.
+
config PINCTRL_IPQ8074
tristate "Qualcomm Technologies, Inc. IPQ8074 pin controller driver"
depends on OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index a5c40f552e5c..818f798653ae 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o
obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o
obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o
obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
+obj-$(CONFIG_PINCTRL_IPQ5332) += pinctrl-ipq5332.o
obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o
obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o
obj-$(CONFIG_PINCTRL_MSM8226) += pinctrl-msm8226.o
diff --git a/drivers/pinctrl/qcom/pinctrl-ipq5332.c b/drivers/pinctrl/qcom/pinctrl-ipq5332.c
new file mode 100644
index 000000000000..17bf3db89748
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-ipq5332.c
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname) \
+ [msm_mux_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ msm_mux_gpio, /* gpio mode */ \
+ msm_mux_##f1, \
+ msm_mux_##f2, \
+ msm_mux_##f3, \
+ msm_mux_##f4, \
+ msm_mux_##f5, \
+ msm_mux_##f6, \
+ msm_mux_##f7, \
+ msm_mux_##f8, \
+ msm_mux_##f9 \
+ }, \
+ .nfuncs = 10, \
+ .ctl_reg = REG_SIZE * id, \
+ .io_reg = 0x4 + REG_SIZE * id, \
+ .intr_cfg_reg = 0x8 + REG_SIZE * id, \
+ .intr_status_reg = 0xc + REG_SIZE * id, \
+ .intr_target_reg = 0x8 + REG_SIZE * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_target_kpss_val = 3, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+static const struct pinctrl_pin_desc ipq5332_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+ static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+
+enum ipq5332_functions {
+ msm_mux_PTA_0,
+ msm_mux_PTA_1,
+ msm_mux_PTA_2,
+ msm_mux_atest_char,
+ msm_mux_atest_char0,
+ msm_mux_atest_char1,
+ msm_mux_atest_char2,
+ msm_mux_atest_char3,
+ msm_mux_atest_tic,
+ msm_mux_audio_pri,
+ msm_mux_audio_pri0,
+ msm_mux_audio_pri1,
+ msm_mux_audio_sec,
+ msm_mux_audio_sec0,
+ msm_mux_audio_sec1,
+ msm_mux_blsp0_i2c,
+ msm_mux_blsp0_spi,
+ msm_mux_blsp0_uart0,
+ msm_mux_blsp0_uart1,
+ msm_mux_blsp1_i2c0,
+ msm_mux_blsp1_i2c1,
+ msm_mux_blsp1_spi0,
+ msm_mux_blsp1_spi1,
+ msm_mux_blsp1_uart0,
+ msm_mux_blsp1_uart1,
+ msm_mux_blsp1_uart2,
+ msm_mux_blsp2_i2c0,
+ msm_mux_blsp2_i2c1,
+ msm_mux_blsp2_spi,
+ msm_mux_blsp2_spi0,
+ msm_mux_blsp2_spi1,
+ msm_mux_core_voltage,
+ msm_mux_cri_trng0,
+ msm_mux_cri_trng1,
+ msm_mux_cri_trng2,
+ msm_mux_cri_trng3,
+ msm_mux_cxc_clk,
+ msm_mux_cxc_data,
+ msm_mux_dbg_out,
+ msm_mux_gcc_plltest,
+ msm_mux_gcc_tlmm,
+ msm_mux_gpio,
+ msm_mux_lock_det,
+ msm_mux_mac0,
+ msm_mux_mac1,
+ msm_mux_mdc0,
+ msm_mux_mdc1,
+ msm_mux_mdio0,
+ msm_mux_mdio1,
+ msm_mux_pc,
+ msm_mux_pcie0_clk,
+ msm_mux_pcie0_wake,
+ msm_mux_pcie1_clk,
+ msm_mux_pcie1_wake,
+ msm_mux_pcie2_clk,
+ msm_mux_pcie2_wake,
+ msm_mux_pll_test,
+ msm_mux_prng_rosc0,
+ msm_mux_prng_rosc1,
+ msm_mux_prng_rosc2,
+ msm_mux_prng_rosc3,
+ msm_mux_pwm0,
+ msm_mux_pwm1,
+ msm_mux_pwm2,
+ msm_mux_pwm3,
+ msm_mux_qdss_cti_trig_in_a0,
+ msm_mux_qdss_cti_trig_in_a1,
+ msm_mux_qdss_cti_trig_in_b0,
+ msm_mux_qdss_cti_trig_in_b1,
+ msm_mux_qdss_cti_trig_out_a0,
+ msm_mux_qdss_cti_trig_out_a1,
+ msm_mux_qdss_cti_trig_out_b0,
+ msm_mux_qdss_cti_trig_out_b1,
+ msm_mux_qdss_traceclk_a,
+ msm_mux_qdss_traceclk_b,
+ msm_mux_qdss_tracectl_a,
+ msm_mux_qdss_tracectl_b,
+ msm_mux_qdss_tracedata_a,
+ msm_mux_qdss_tracedata_b,
+ msm_mux_qspi_data,
+ msm_mux_qspi_clk,
+ msm_mux_qspi_cs,
+ msm_mux_resout,
+ msm_mux_rx0,
+ msm_mux_rx1,
+ msm_mux_sdc_data,
+ msm_mux_sdc_clk,
+ msm_mux_sdc_cmd,
+ msm_mux_tsens_max,
+ msm_mux_wci0,
+ msm_mux_wci1,
+ msm_mux_wci10,
+ msm_mux_wci11,
+ msm_mux_wci2,
+ msm_mux_wci3,
+ msm_mux_wci4,
+ msm_mux_wci5,
+ msm_mux_wci6,
+ msm_mux_wci7,
+ msm_mux_wci8,
+ msm_mux_wci9,
+ msm_mux_wsi_clk,
+ msm_mux_wsi_clk3,
+ msm_mux_wsi_data,
+ msm_mux_wsi_data3,
+ msm_mux_wsis_reset,
+ msm_mux_xfem0,
+ msm_mux_xfem1,
+ msm_mux_xfem2,
+ msm_mux_xfem3,
+ msm_mux_xfem4,
+ msm_mux_xfem5,
+ msm_mux_xfem6,
+ msm_mux_xfem7,
+ msm_mux__,
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52",
+};
+
+static const char * const PTA_0_groups[] = {
+ "gpio49",
+};
+
+static const char * const PTA_1_groups[] = {
+ "gpio50",
+};
+
+static const char * const PTA_2_groups[] = {
+ "gpio51",
+};
+
+static const char * const atest_char_groups[] = {
+ "gpio46",
+};
+
+static const char * const atest_char0_groups[] = {
+ "gpio0",
+};
+
+static const char * const atest_char1_groups[] = {
+ "gpio1",
+};
+
+static const char * const atest_char2_groups[] = {
+ "gpio2",
+};
+
+static const char * const atest_char3_groups[] = {
+ "gpio3",
+};
+
+static const char * const atest_tic_groups[] = {
+ "gpio9",
+};
+
+static const char * const audio_pri_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32",
+};
+
+static const char * const audio_pri0_groups[] = {
+ "gpio34", "gpio34",
+};
+
+static const char * const audio_pri1_groups[] = {
+ "gpio43", "gpio43",
+};
+
+static const char * const audio_sec_groups[] = {
+ "gpio33", "gpio34", "gpio35", "gpio36",
+};
+
+static const char * const audio_sec0_groups[] = {
+ "gpio30", "gpio30",
+};
+
+static const char * const audio_sec1_groups[] = {
+ "gpio45", "gpio45",
+};
+
+static const char * const blsp0_i2c_groups[] = {
+ "gpio16", "gpio17",
+};
+
+static const char * const blsp0_spi_groups[] = {
+ "gpio14", "gpio15", "gpio16", "gpio17",
+};
+
+static const char * const blsp0_uart0_groups[] = {
+ "gpio18", "gpio19",
+};
+
+static const char * const blsp0_uart1_groups[] = {
+ "gpio27", "gpio28",
+};
+
+static const char * const blsp1_i2c0_groups[] = {
+ "gpio29", "gpio30",
+};
+
+static const char * const blsp1_i2c1_groups[] = {
+ "gpio40", "gpio41",
+};
+
+static const char * const blsp1_spi0_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32",
+};
+
+static const char * const blsp1_spi1_groups[] = {
+ "gpio25", "gpio26", "gpio27", "gpio28",
+};
+
+static const char * const blsp1_uart0_groups[] = {
+ "gpio14", "gpio15", "gpio16", "gpio17",
+};
+
+static const char * const blsp1_uart1_groups[] = {
+ "gpio25", "gpio26", "gpio27", "gpio28",
+};
+
+static const char * const blsp1_uart2_groups[] = {
+ "gpio33", "gpio34", "gpio35", "gpio36",
+};
+
+static const char * const blsp2_i2c0_groups[] = {
+ "gpio43", "gpio45",
+};
+
+static const char * const blsp2_i2c1_groups[] = {
+ "gpio33", "gpio34",
+};
+
+static const char * const blsp2_spi_groups[] = {
+ "gpio37",
+};
+
+static const char * const blsp2_spi0_groups[] = {
+ "gpio33", "gpio34", "gpio35", "gpio36",
+};
+
+static const char * const blsp2_spi1_groups[] = {
+ "gpio40", "gpio41", "gpio42", "gpio52",
+};
+
+static const char * const core_voltage_groups[] = {
+ "gpio21", "gpio23",
+};
+
+static const char * const cri_trng0_groups[] = {
+ "gpio17",
+};
+
+static const char * const cri_trng1_groups[] = {
+ "gpio18",
+};
+
+static const char * const cri_trng2_groups[] = {
+ "gpio19",
+};
+
+static const char * const cri_trng3_groups[] = {
+ "gpio20",
+};
+
+static const char * const cxc_clk_groups[] = {
+ "gpio49",
+};
+
+static const char * const cxc_data_groups[] = {
+ "gpio50",
+};
+
+static const char * const dbg_out_groups[] = {
+ "gpio48",
+};
+
+static const char * const gcc_plltest_groups[] = {
+ "gpio43", "gpio45",
+};
+
+static const char * const gcc_tlmm_groups[] = {
+ "gpio44",
+};
+
+static const char * const lock_det_groups[] = {
+ "gpio51",
+};
+
+static const char * const mac0_groups[] = {
+ "gpio18",
+};
+
+static const char * const mac1_groups[] = {
+ "gpio19",
+};
+
+static const char * const mdc0_groups[] = {
+ "gpio25",
+};
+
+static const char * const mdc1_groups[] = {
+ "gpio27",
+};
+
+static const char * const mdio0_groups[] = {
+ "gpio26",
+};
+
+static const char * const mdio1_groups[] = {
+ "gpio28",
+};
+
+static const char * const pc_groups[] = {
+ "gpio35",
+};
+
+static const char * const pcie0_clk_groups[] = {
+ "gpio37",
+};
+
+static const char * const pcie0_wake_groups[] = {
+ "gpio39",
+};
+
+static const char * const pcie1_clk_groups[] = {
+ "gpio46",
+};
+
+static const char * const pcie1_wake_groups[] = {
+ "gpio48",
+};
+
+static const char * const pcie2_clk_groups[] = {
+ "gpio43",
+};
+
+static const char * const pcie2_wake_groups[] = {
+ "gpio45",
+};
+
+static const char * const pll_test_groups[] = {
+ "gpio49",
+};
+
+static const char * const prng_rosc0_groups[] = {
+ "gpio22",
+};
+
+static const char * const prng_rosc1_groups[] = {
+ "gpio24",
+};
+
+static const char * const prng_rosc2_groups[] = {
+ "gpio25",
+};
+
+static const char * const prng_rosc3_groups[] = {
+ "gpio26",
+};
+
+static const char * const pwm0_groups[] = {
+ "gpio43", "gpio44", "gpio45", "gpio46",
+};
+
+static const char * const pwm1_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32",
+};
+
+static const char * const pwm2_groups[] = {
+ "gpio25", "gpio26", "gpio27", "gpio28",
+};
+
+static const char * const pwm3_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11",
+};
+
+static const char * const qdss_cti_trig_in_a0_groups[] = {
+ "gpio5",
+};
+
+static const char * const qdss_cti_trig_in_a1_groups[] = {
+ "gpio7",
+};
+
+static const char * const qdss_cti_trig_in_b0_groups[] = {
+ "gpio47",
+};
+
+static const char * const qdss_cti_trig_in_b1_groups[] = {
+ "gpio49",
+};
+
+static const char * const qdss_cti_trig_out_a0_groups[] = {
+ "gpio4",
+};
+
+static const char * const qdss_cti_trig_out_a1_groups[] = {
+ "gpio6",
+};
+
+static const char * const qdss_cti_trig_out_b0_groups[] = {
+ "gpio46",
+};
+
+static const char * const qdss_cti_trig_out_b1_groups[] = {
+ "gpio48",
+};
+
+static const char * const qdss_traceclk_a_groups[] = {
+ "gpio8",
+};
+
+static const char * const qdss_traceclk_b_groups[] = {
+ "gpio45",
+};
+
+static const char * const qdss_tracectl_a_groups[] = {
+ "gpio9",
+};
+
+static const char * const qdss_tracectl_b_groups[] = {
+ "gpio44",
+};
+
+static const char * const qdss_tracedata_a_groups[] = {
+ "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", "gpio16",
+ "gpio17", "gpio18", "gpio19", "gpio20", "gpio22", "gpio24", "gpio25",
+ "gpio26", "gpio27",
+};
+
+static const char * const qdss_tracedata_b_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio52",
+};
+
+static const char * const qspi_clk_groups[] = {
+ "gpio13",
+};
+
+static const char * const qspi_cs_groups[] = {
+ "gpio12",
+};
+
+static const char * const qspi_data_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11",
+};
+
+static const char * const resout_groups[] = {
+ "gpio20",
+};
+
+static const char * const rx0_groups[] = {
+ "gpio48",
+};
+
+static const char * const rx1_groups[] = {
+ "gpio45",
+};
+
+static const char * const sdc_clk_groups[] = {
+ "gpio13",
+};
+
+static const char * const sdc_cmd_groups[] = {
+ "gpio12",
+};
+
+static const char * const sdc_data_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11",
+};
+
+static const char * const tsens_max_groups[] = {
+ "gpio28",
+};
+
+static const char * const wci0_groups[] = {
+ "gpio0", "gpio0",
+};
+
+static const char * const wci1_groups[] = {
+ "gpio1", "gpio1",
+};
+
+static const char * const wci10_groups[] = {
+ "gpio35",
+};
+
+static const char * const wci11_groups[] = {
+ "gpio36", "gpio36",
+};
+
+static const char * const wci2_groups[] = {
+ "gpio2", "gpio2",
+};
+
+static const char * const wci3_groups[] = {
+ "gpio3", "gpio3",
+};
+
+static const char * const wci4_groups[] = {
+ "gpio4", "gpio4",
+};
+
+static const char * const wci5_groups[] = {
+ "gpio5", "gpio5",
+};
+
+static const char * const wci6_groups[] = {
+ "gpio6", "gpio6",
+};
+
+static const char * const wci7_groups[] = {
+ "gpio7", "gpio7",
+};
+
+static const char * const wci8_groups[] = {
+ "gpio43", "gpio43",
+};
+
+static const char * const wci9_groups[] = {
+ "gpio45", "gpio45",
+};
+
+static const char * const wsi_clk_groups[] = {
+ "gpio40", "gpio42",
+};
+
+static const char * const wsi_clk3_groups[] = {
+ "gpio43",
+};
+
+static const char * const wsi_data_groups[] = {
+ "gpio41", "gpio52",
+};
+
+static const char * const wsi_data3_groups[] = {
+ "gpio44",
+};
+
+static const char * const wsis_reset_groups[] = {
+ "gpio41",
+};
+
+static const char * const xfem0_groups[] = {
+ "gpio0",
+};
+
+static const char * const xfem1_groups[] = {
+ "gpio1",
+};
+
+static const char * const xfem2_groups[] = {
+ "gpio2",
+};
+
+static const char * const xfem3_groups[] = {
+ "gpio3",
+};
+
+static const char * const xfem4_groups[] = {
+ "gpio4",
+};
+
+static const char * const xfem5_groups[] = {
+ "gpio5",
+};
+
+static const char * const xfem6_groups[] = {
+ "gpio6",
+};
+
+static const char * const xfem7_groups[] = {
+ "gpio7",
+};
+
+static const struct msm_function ipq5332_functions[] = {
+ FUNCTION(PTA_0),
+ FUNCTION(PTA_1),
+ FUNCTION(PTA_2),
+ FUNCTION(atest_char),
+ FUNCTION(atest_char0),
+ FUNCTION(atest_char1),
+ FUNCTION(atest_char2),
+ FUNCTION(atest_char3),
+ FUNCTION(atest_tic),
+ FUNCTION(audio_pri),
+ FUNCTION(audio_pri0),
+ FUNCTION(audio_pri1),
+ FUNCTION(audio_sec),
+ FUNCTION(audio_sec0),
+ FUNCTION(audio_sec1),
+ FUNCTION(blsp0_i2c),
+ FUNCTION(blsp0_spi),
+ FUNCTION(blsp0_uart0),
+ FUNCTION(blsp0_uart1),
+ FUNCTION(blsp1_i2c0),
+ FUNCTION(blsp1_i2c1),
+ FUNCTION(blsp1_spi0),
+ FUNCTION(blsp1_spi1),
+ FUNCTION(blsp1_uart0),
+ FUNCTION(blsp1_uart1),
+ FUNCTION(blsp1_uart2),
+ FUNCTION(blsp2_i2c0),
+ FUNCTION(blsp2_i2c1),
+ FUNCTION(blsp2_spi),
+ FUNCTION(blsp2_spi0),
+ FUNCTION(blsp2_spi1),
+ FUNCTION(core_voltage),
+ FUNCTION(cri_trng0),
+ FUNCTION(cri_trng1),
+ FUNCTION(cri_trng2),
+ FUNCTION(cri_trng3),
+ FUNCTION(cxc_clk),
+ FUNCTION(cxc_data),
+ FUNCTION(dbg_out),
+ FUNCTION(gcc_plltest),
+ FUNCTION(gcc_tlmm),
+ FUNCTION(gpio),
+ FUNCTION(lock_det),
+ FUNCTION(mac0),
+ FUNCTION(mac1),
+ FUNCTION(mdc0),
+ FUNCTION(mdc1),
+ FUNCTION(mdio0),
+ FUNCTION(mdio1),
+ FUNCTION(pc),
+ FUNCTION(pcie0_clk),
+ FUNCTION(pcie0_wake),
+ FUNCTION(pcie1_clk),
+ FUNCTION(pcie1_wake),
+ FUNCTION(pcie2_clk),
+ FUNCTION(pcie2_wake),
+ FUNCTION(pll_test),
+ FUNCTION(prng_rosc0),
+ FUNCTION(prng_rosc1),
+ FUNCTION(prng_rosc2),
+ FUNCTION(prng_rosc3),
+ FUNCTION(pwm0),
+ FUNCTION(pwm1),
+ FUNCTION(pwm2),
+ FUNCTION(pwm3),
+ FUNCTION(qdss_cti_trig_in_a0),
+ FUNCTION(qdss_cti_trig_in_a1),
+ FUNCTION(qdss_cti_trig_in_b0),
+ FUNCTION(qdss_cti_trig_in_b1),
+ FUNCTION(qdss_cti_trig_out_a0),
+ FUNCTION(qdss_cti_trig_out_a1),
+ FUNCTION(qdss_cti_trig_out_b0),
+ FUNCTION(qdss_cti_trig_out_b1),
+ FUNCTION(qdss_traceclk_a),
+ FUNCTION(qdss_traceclk_b),
+ FUNCTION(qdss_tracectl_a),
+ FUNCTION(qdss_tracectl_b),
+ FUNCTION(qdss_tracedata_a),
+ FUNCTION(qdss_tracedata_b),
+ FUNCTION(qspi_data),
+ FUNCTION(qspi_clk),
+ FUNCTION(qspi_cs),
+ FUNCTION(resout),
+ FUNCTION(rx0),
+ FUNCTION(rx1),
+ FUNCTION(sdc_data),
+ FUNCTION(sdc_clk),
+ FUNCTION(sdc_cmd),
+ FUNCTION(tsens_max),
+ FUNCTION(wci0),
+ FUNCTION(wci1),
+ FUNCTION(wci10),
+ FUNCTION(wci11),
+ FUNCTION(wci2),
+ FUNCTION(wci3),
+ FUNCTION(wci4),
+ FUNCTION(wci5),
+ FUNCTION(wci6),
+ FUNCTION(wci7),
+ FUNCTION(wci8),
+ FUNCTION(wci9),
+ FUNCTION(wsi_clk),
+ FUNCTION(wsi_clk3),
+ FUNCTION(wsi_data),
+ FUNCTION(wsi_data3),
+ FUNCTION(wsis_reset),
+ FUNCTION(xfem0),
+ FUNCTION(xfem1),
+ FUNCTION(xfem2),
+ FUNCTION(xfem3),
+ FUNCTION(xfem4),
+ FUNCTION(xfem5),
+ FUNCTION(xfem6),
+ FUNCTION(xfem7),
+};
+
+static const struct msm_pingroup ipq5332_groups[] = {
+ PINGROUP(0, atest_char0, wci0, wci0, xfem0, _, _, _, _, _),
+ PINGROUP(1, atest_char1, wci1, wci1, xfem1, _, _, _, _, _),
+ PINGROUP(2, atest_char2, wci2, wci2, xfem2, _, _, _, _, _),
+ PINGROUP(3, atest_char3, wci3, wci3, xfem3, _, _, _, _, _),
+ PINGROUP(4, qdss_cti_trig_out_a0, wci4, wci4, xfem4, _, _, _, _,
+ _),
+ PINGROUP(5, qdss_cti_trig_in_a0, wci5, wci5, xfem5, _, _, _, _, _),
+ PINGROUP(6, qdss_cti_trig_out_a1, wci6, wci6, xfem6, _, _, _, _,
+ _),
+ PINGROUP(7, qdss_cti_trig_in_a1, wci7, wci7, xfem7, _, _, _, _, _),
+ PINGROUP(8, sdc_data, qspi_data, pwm3, qdss_traceclk_a, _, _, _, _, _),
+ PINGROUP(9, sdc_data, qspi_data, pwm3, qdss_tracectl_a, _, atest_tic, _, _,
+ _),
+ PINGROUP(10, sdc_data, qspi_data, pwm3, qdss_tracedata_a, _, _, _, _, _),
+ PINGROUP(11, sdc_data, qspi_data, pwm3, qdss_tracedata_a, _, _, _, _, _),
+ PINGROUP(12, sdc_cmd, qspi_cs, qdss_tracedata_a, _, _, _, _, _,
+ _),
+ PINGROUP(13, sdc_clk, qspi_clk, qdss_tracedata_a, _, _, _, _, _,
+ _),
+ PINGROUP(14, blsp0_spi, blsp1_uart0, qdss_tracedata_a, _, _, _, _,
+ _, _),
+ PINGROUP(15, blsp0_spi, blsp1_uart0, qdss_tracedata_a, _, _, _, _,
+ _, _),
+ PINGROUP(16, blsp0_spi, blsp0_i2c, blsp1_uart0, _, qdss_tracedata_a,
+ _, _, _, _),
+ PINGROUP(17, blsp0_spi, blsp0_i2c, blsp1_uart0, _, cri_trng0,
+ qdss_tracedata_a, _, _, _),
+ PINGROUP(18, blsp0_uart0, mac0, _, cri_trng1, qdss_tracedata_a, _,
+ _, _, _),
+ PINGROUP(19, blsp0_uart0, mac1, _, cri_trng2, qdss_tracedata_a, _,
+ _, _, _),
+ PINGROUP(20, resout, _, cri_trng3, qdss_tracedata_a, _, _, _, _,
+ _),
+ PINGROUP(21, core_voltage, _, _, _, _, _, _, _, _),
+ PINGROUP(22, _, prng_rosc0, qdss_tracedata_a, _, _, _, _, _, _),
+ PINGROUP(23, core_voltage, _, _, _, _, _, _, _, _),
+ PINGROUP(24, _, prng_rosc1, qdss_tracedata_a, _, _, _, _, _, _),
+ PINGROUP(25, mdc0, blsp1_uart1, blsp1_spi1, pwm2, _, _, prng_rosc2,
+ qdss_tracedata_a, _),
+ PINGROUP(26, mdio0, blsp1_uart1, blsp1_spi1, pwm2, _, _, prng_rosc3,
+ qdss_tracedata_a, _),
+ PINGROUP(27, mdc1, blsp0_uart1, blsp1_uart1, blsp1_spi1, pwm2, _, _,
+ qdss_tracedata_a, _),
+ PINGROUP(28, mdio1, blsp0_uart1, blsp1_uart1, blsp1_spi1, pwm2, _,
+ tsens_max, _, _),
+ PINGROUP(29, audio_pri, blsp1_spi0, blsp1_i2c0, pwm1, _,
+ qdss_tracedata_b, _, _, _),
+ PINGROUP(30, audio_pri, blsp1_spi0, blsp1_i2c0, pwm1, audio_sec0,
+ audio_sec0, _, qdss_tracedata_b, _),
+ PINGROUP(31, audio_pri, blsp1_spi0, pwm1, _, qdss_tracedata_b, _, _,
+ _, _),
+ PINGROUP(32, audio_pri, blsp1_spi0, pwm1, _, qdss_tracedata_b, _, _,
+ _, _),
+ PINGROUP(33, audio_sec, blsp1_uart2, blsp2_i2c1, blsp2_spi0, _,
+ qdss_tracedata_b, _, _, _),
+ PINGROUP(34, audio_sec, blsp1_uart2, blsp2_i2c1, blsp2_spi0,
+ audio_pri0, audio_pri0, _, qdss_tracedata_b, _),
+ PINGROUP(35, audio_sec, blsp1_uart2, pc, wci10, blsp2_spi0,
+ _, qdss_tracedata_b, _, _),
+ PINGROUP(36, audio_sec, blsp1_uart2, wci11, wci11, blsp2_spi0,
+ _, qdss_tracedata_b, _, _),
+ PINGROUP(37, pcie0_clk, blsp2_spi, _, qdss_tracedata_b, _, _, _,
+ _, _),
+ PINGROUP(38, _, qdss_tracedata_b, _, _, _, _, _, _, _),
+ PINGROUP(39, pcie0_wake, _, qdss_tracedata_b, _, _, _, _, _, _),
+ PINGROUP(40, wsi_clk, blsp1_i2c1, blsp2_spi1, _, _, qdss_tracedata_b,
+ _, _, _),
+ PINGROUP(41, wsi_data, blsp1_i2c1, blsp2_spi1, _, _,
+ qdss_tracedata_b, _, wsis_reset, _),
+ PINGROUP(42, wsi_clk, blsp2_spi1, _, qdss_tracedata_b, _, _, _, _,
+ _),
+ PINGROUP(43, pcie2_clk, wci8, wci8, blsp2_i2c0, pwm0, audio_pri1,
+ audio_pri1, _, gcc_plltest),
+ PINGROUP(44, pwm0, _, gcc_tlmm, qdss_tracectl_b, _, wsi_data3, _,
+ _, _),
+ PINGROUP(45, pcie2_wake, wci9, wci9, blsp2_i2c0, rx1, pwm0, audio_sec1,
+ audio_sec1, _),
+ PINGROUP(46, pcie1_clk, atest_char, pwm0, _, qdss_cti_trig_out_b0, _,
+ _, _, _),
+ PINGROUP(47, _, qdss_cti_trig_in_b0, _, _, _, _, _, _, _),
+ PINGROUP(48, pcie1_wake, rx0, dbg_out, qdss_cti_trig_out_b1, _, _,
+ _, _, _),
+ PINGROUP(49, PTA_0, cxc_clk, pll_test, _, qdss_cti_trig_in_b1, _, _,
+ _, _),
+ PINGROUP(50, PTA_1, cxc_data, _, _, _, _, _, _, _),
+ PINGROUP(51, PTA_2, lock_det, _, _, _, _, _, _, _),
+ PINGROUP(52, wsi_data, blsp2_spi1, _, qdss_tracedata_b, _, _, _,
+ _, _),
+};
+
+static const struct msm_pinctrl_soc_data ipq5332_pinctrl = {
+ .pins = ipq5332_pins,
+ .npins = ARRAY_SIZE(ipq5332_pins),
+ .functions = ipq5332_functions,
+ .nfunctions = ARRAY_SIZE(ipq5332_functions),
+ .groups = ipq5332_groups,
+ .ngroups = ARRAY_SIZE(ipq5332_groups),
+ .ngpios = 53,
+};
+
+static int ipq5332_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &ipq5332_pinctrl);
+}
+
+static const struct of_device_id ipq5332_pinctrl_of_match[] = {
+ { .compatible = "qcom,ipq5332-tlmm", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ipq5332_pinctrl_of_match);
+
+static struct platform_driver ipq5332_pinctrl_driver = {
+ .driver = {
+ .name = "ipq5332-tlmm",
+ .of_match_table = ipq5332_pinctrl_of_match,
+ },
+ .probe = ipq5332_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init ipq5332_pinctrl_init(void)
+{
+ return platform_driver_register(&ipq5332_pinctrl_driver);
+}
+arch_initcall(ipq5332_pinctrl_init);
+
+static void __exit ipq5332_pinctrl_exit(void)
+{
+ platform_driver_unregister(&ipq5332_pinctrl_driver);
+}
+module_exit(ipq5332_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI IPQ5332 TLMM driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 02/10] pinctrl: qcom: Introduce IPQ5332 TLMM driver
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
The IPQ5332 SoC comes with a TLMM block, like all other Qualcomm
platforms, so add a driver for it.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq5332.c | 1008 ++++++++++++++++++++++++
3 files changed, 1019 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5332.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 1378ddca084f..ad18cdf85ff8 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -48,6 +48,16 @@ config PINCTRL_IPQ8064
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm TLMM block found in the Qualcomm IPQ8064 platform.
+config PINCTRL_IPQ5332
+ tristate "Qualcomm Technologies Inc IPQ5332 pin controller driver"
+ depends on OF
+ depends on ARM64 || COMPILE_TEST
+ depends on PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm Technologies Inc TLMM block found on the Qualcomm
+ Technologies Inc IPQ5332 platform.
+
config PINCTRL_IPQ8074
tristate "Qualcomm Technologies, Inc. IPQ8074 pin controller driver"
depends on OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index a5c40f552e5c..818f798653ae 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o
obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o
obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o
obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
+obj-$(CONFIG_PINCTRL_IPQ5332) += pinctrl-ipq5332.o
obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o
obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o
obj-$(CONFIG_PINCTRL_MSM8226) += pinctrl-msm8226.o
diff --git a/drivers/pinctrl/qcom/pinctrl-ipq5332.c b/drivers/pinctrl/qcom/pinctrl-ipq5332.c
new file mode 100644
index 000000000000..17bf3db89748
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-ipq5332.c
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname) \
+ [msm_mux_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ msm_mux_gpio, /* gpio mode */ \
+ msm_mux_##f1, \
+ msm_mux_##f2, \
+ msm_mux_##f3, \
+ msm_mux_##f4, \
+ msm_mux_##f5, \
+ msm_mux_##f6, \
+ msm_mux_##f7, \
+ msm_mux_##f8, \
+ msm_mux_##f9 \
+ }, \
+ .nfuncs = 10, \
+ .ctl_reg = REG_SIZE * id, \
+ .io_reg = 0x4 + REG_SIZE * id, \
+ .intr_cfg_reg = 0x8 + REG_SIZE * id, \
+ .intr_status_reg = 0xc + REG_SIZE * id, \
+ .intr_target_reg = 0x8 + REG_SIZE * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_target_kpss_val = 3, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+static const struct pinctrl_pin_desc ipq5332_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+ static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+
+enum ipq5332_functions {
+ msm_mux_PTA_0,
+ msm_mux_PTA_1,
+ msm_mux_PTA_2,
+ msm_mux_atest_char,
+ msm_mux_atest_char0,
+ msm_mux_atest_char1,
+ msm_mux_atest_char2,
+ msm_mux_atest_char3,
+ msm_mux_atest_tic,
+ msm_mux_audio_pri,
+ msm_mux_audio_pri0,
+ msm_mux_audio_pri1,
+ msm_mux_audio_sec,
+ msm_mux_audio_sec0,
+ msm_mux_audio_sec1,
+ msm_mux_blsp0_i2c,
+ msm_mux_blsp0_spi,
+ msm_mux_blsp0_uart0,
+ msm_mux_blsp0_uart1,
+ msm_mux_blsp1_i2c0,
+ msm_mux_blsp1_i2c1,
+ msm_mux_blsp1_spi0,
+ msm_mux_blsp1_spi1,
+ msm_mux_blsp1_uart0,
+ msm_mux_blsp1_uart1,
+ msm_mux_blsp1_uart2,
+ msm_mux_blsp2_i2c0,
+ msm_mux_blsp2_i2c1,
+ msm_mux_blsp2_spi,
+ msm_mux_blsp2_spi0,
+ msm_mux_blsp2_spi1,
+ msm_mux_core_voltage,
+ msm_mux_cri_trng0,
+ msm_mux_cri_trng1,
+ msm_mux_cri_trng2,
+ msm_mux_cri_trng3,
+ msm_mux_cxc_clk,
+ msm_mux_cxc_data,
+ msm_mux_dbg_out,
+ msm_mux_gcc_plltest,
+ msm_mux_gcc_tlmm,
+ msm_mux_gpio,
+ msm_mux_lock_det,
+ msm_mux_mac0,
+ msm_mux_mac1,
+ msm_mux_mdc0,
+ msm_mux_mdc1,
+ msm_mux_mdio0,
+ msm_mux_mdio1,
+ msm_mux_pc,
+ msm_mux_pcie0_clk,
+ msm_mux_pcie0_wake,
+ msm_mux_pcie1_clk,
+ msm_mux_pcie1_wake,
+ msm_mux_pcie2_clk,
+ msm_mux_pcie2_wake,
+ msm_mux_pll_test,
+ msm_mux_prng_rosc0,
+ msm_mux_prng_rosc1,
+ msm_mux_prng_rosc2,
+ msm_mux_prng_rosc3,
+ msm_mux_pwm0,
+ msm_mux_pwm1,
+ msm_mux_pwm2,
+ msm_mux_pwm3,
+ msm_mux_qdss_cti_trig_in_a0,
+ msm_mux_qdss_cti_trig_in_a1,
+ msm_mux_qdss_cti_trig_in_b0,
+ msm_mux_qdss_cti_trig_in_b1,
+ msm_mux_qdss_cti_trig_out_a0,
+ msm_mux_qdss_cti_trig_out_a1,
+ msm_mux_qdss_cti_trig_out_b0,
+ msm_mux_qdss_cti_trig_out_b1,
+ msm_mux_qdss_traceclk_a,
+ msm_mux_qdss_traceclk_b,
+ msm_mux_qdss_tracectl_a,
+ msm_mux_qdss_tracectl_b,
+ msm_mux_qdss_tracedata_a,
+ msm_mux_qdss_tracedata_b,
+ msm_mux_qspi_data,
+ msm_mux_qspi_clk,
+ msm_mux_qspi_cs,
+ msm_mux_resout,
+ msm_mux_rx0,
+ msm_mux_rx1,
+ msm_mux_sdc_data,
+ msm_mux_sdc_clk,
+ msm_mux_sdc_cmd,
+ msm_mux_tsens_max,
+ msm_mux_wci0,
+ msm_mux_wci1,
+ msm_mux_wci10,
+ msm_mux_wci11,
+ msm_mux_wci2,
+ msm_mux_wci3,
+ msm_mux_wci4,
+ msm_mux_wci5,
+ msm_mux_wci6,
+ msm_mux_wci7,
+ msm_mux_wci8,
+ msm_mux_wci9,
+ msm_mux_wsi_clk,
+ msm_mux_wsi_clk3,
+ msm_mux_wsi_data,
+ msm_mux_wsi_data3,
+ msm_mux_wsis_reset,
+ msm_mux_xfem0,
+ msm_mux_xfem1,
+ msm_mux_xfem2,
+ msm_mux_xfem3,
+ msm_mux_xfem4,
+ msm_mux_xfem5,
+ msm_mux_xfem6,
+ msm_mux_xfem7,
+ msm_mux__,
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52",
+};
+
+static const char * const PTA_0_groups[] = {
+ "gpio49",
+};
+
+static const char * const PTA_1_groups[] = {
+ "gpio50",
+};
+
+static const char * const PTA_2_groups[] = {
+ "gpio51",
+};
+
+static const char * const atest_char_groups[] = {
+ "gpio46",
+};
+
+static const char * const atest_char0_groups[] = {
+ "gpio0",
+};
+
+static const char * const atest_char1_groups[] = {
+ "gpio1",
+};
+
+static const char * const atest_char2_groups[] = {
+ "gpio2",
+};
+
+static const char * const atest_char3_groups[] = {
+ "gpio3",
+};
+
+static const char * const atest_tic_groups[] = {
+ "gpio9",
+};
+
+static const char * const audio_pri_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32",
+};
+
+static const char * const audio_pri0_groups[] = {
+ "gpio34", "gpio34",
+};
+
+static const char * const audio_pri1_groups[] = {
+ "gpio43", "gpio43",
+};
+
+static const char * const audio_sec_groups[] = {
+ "gpio33", "gpio34", "gpio35", "gpio36",
+};
+
+static const char * const audio_sec0_groups[] = {
+ "gpio30", "gpio30",
+};
+
+static const char * const audio_sec1_groups[] = {
+ "gpio45", "gpio45",
+};
+
+static const char * const blsp0_i2c_groups[] = {
+ "gpio16", "gpio17",
+};
+
+static const char * const blsp0_spi_groups[] = {
+ "gpio14", "gpio15", "gpio16", "gpio17",
+};
+
+static const char * const blsp0_uart0_groups[] = {
+ "gpio18", "gpio19",
+};
+
+static const char * const blsp0_uart1_groups[] = {
+ "gpio27", "gpio28",
+};
+
+static const char * const blsp1_i2c0_groups[] = {
+ "gpio29", "gpio30",
+};
+
+static const char * const blsp1_i2c1_groups[] = {
+ "gpio40", "gpio41",
+};
+
+static const char * const blsp1_spi0_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32",
+};
+
+static const char * const blsp1_spi1_groups[] = {
+ "gpio25", "gpio26", "gpio27", "gpio28",
+};
+
+static const char * const blsp1_uart0_groups[] = {
+ "gpio14", "gpio15", "gpio16", "gpio17",
+};
+
+static const char * const blsp1_uart1_groups[] = {
+ "gpio25", "gpio26", "gpio27", "gpio28",
+};
+
+static const char * const blsp1_uart2_groups[] = {
+ "gpio33", "gpio34", "gpio35", "gpio36",
+};
+
+static const char * const blsp2_i2c0_groups[] = {
+ "gpio43", "gpio45",
+};
+
+static const char * const blsp2_i2c1_groups[] = {
+ "gpio33", "gpio34",
+};
+
+static const char * const blsp2_spi_groups[] = {
+ "gpio37",
+};
+
+static const char * const blsp2_spi0_groups[] = {
+ "gpio33", "gpio34", "gpio35", "gpio36",
+};
+
+static const char * const blsp2_spi1_groups[] = {
+ "gpio40", "gpio41", "gpio42", "gpio52",
+};
+
+static const char * const core_voltage_groups[] = {
+ "gpio21", "gpio23",
+};
+
+static const char * const cri_trng0_groups[] = {
+ "gpio17",
+};
+
+static const char * const cri_trng1_groups[] = {
+ "gpio18",
+};
+
+static const char * const cri_trng2_groups[] = {
+ "gpio19",
+};
+
+static const char * const cri_trng3_groups[] = {
+ "gpio20",
+};
+
+static const char * const cxc_clk_groups[] = {
+ "gpio49",
+};
+
+static const char * const cxc_data_groups[] = {
+ "gpio50",
+};
+
+static const char * const dbg_out_groups[] = {
+ "gpio48",
+};
+
+static const char * const gcc_plltest_groups[] = {
+ "gpio43", "gpio45",
+};
+
+static const char * const gcc_tlmm_groups[] = {
+ "gpio44",
+};
+
+static const char * const lock_det_groups[] = {
+ "gpio51",
+};
+
+static const char * const mac0_groups[] = {
+ "gpio18",
+};
+
+static const char * const mac1_groups[] = {
+ "gpio19",
+};
+
+static const char * const mdc0_groups[] = {
+ "gpio25",
+};
+
+static const char * const mdc1_groups[] = {
+ "gpio27",
+};
+
+static const char * const mdio0_groups[] = {
+ "gpio26",
+};
+
+static const char * const mdio1_groups[] = {
+ "gpio28",
+};
+
+static const char * const pc_groups[] = {
+ "gpio35",
+};
+
+static const char * const pcie0_clk_groups[] = {
+ "gpio37",
+};
+
+static const char * const pcie0_wake_groups[] = {
+ "gpio39",
+};
+
+static const char * const pcie1_clk_groups[] = {
+ "gpio46",
+};
+
+static const char * const pcie1_wake_groups[] = {
+ "gpio48",
+};
+
+static const char * const pcie2_clk_groups[] = {
+ "gpio43",
+};
+
+static const char * const pcie2_wake_groups[] = {
+ "gpio45",
+};
+
+static const char * const pll_test_groups[] = {
+ "gpio49",
+};
+
+static const char * const prng_rosc0_groups[] = {
+ "gpio22",
+};
+
+static const char * const prng_rosc1_groups[] = {
+ "gpio24",
+};
+
+static const char * const prng_rosc2_groups[] = {
+ "gpio25",
+};
+
+static const char * const prng_rosc3_groups[] = {
+ "gpio26",
+};
+
+static const char * const pwm0_groups[] = {
+ "gpio43", "gpio44", "gpio45", "gpio46",
+};
+
+static const char * const pwm1_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32",
+};
+
+static const char * const pwm2_groups[] = {
+ "gpio25", "gpio26", "gpio27", "gpio28",
+};
+
+static const char * const pwm3_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11",
+};
+
+static const char * const qdss_cti_trig_in_a0_groups[] = {
+ "gpio5",
+};
+
+static const char * const qdss_cti_trig_in_a1_groups[] = {
+ "gpio7",
+};
+
+static const char * const qdss_cti_trig_in_b0_groups[] = {
+ "gpio47",
+};
+
+static const char * const qdss_cti_trig_in_b1_groups[] = {
+ "gpio49",
+};
+
+static const char * const qdss_cti_trig_out_a0_groups[] = {
+ "gpio4",
+};
+
+static const char * const qdss_cti_trig_out_a1_groups[] = {
+ "gpio6",
+};
+
+static const char * const qdss_cti_trig_out_b0_groups[] = {
+ "gpio46",
+};
+
+static const char * const qdss_cti_trig_out_b1_groups[] = {
+ "gpio48",
+};
+
+static const char * const qdss_traceclk_a_groups[] = {
+ "gpio8",
+};
+
+static const char * const qdss_traceclk_b_groups[] = {
+ "gpio45",
+};
+
+static const char * const qdss_tracectl_a_groups[] = {
+ "gpio9",
+};
+
+static const char * const qdss_tracectl_b_groups[] = {
+ "gpio44",
+};
+
+static const char * const qdss_tracedata_a_groups[] = {
+ "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", "gpio16",
+ "gpio17", "gpio18", "gpio19", "gpio20", "gpio22", "gpio24", "gpio25",
+ "gpio26", "gpio27",
+};
+
+static const char * const qdss_tracedata_b_groups[] = {
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio52",
+};
+
+static const char * const qspi_clk_groups[] = {
+ "gpio13",
+};
+
+static const char * const qspi_cs_groups[] = {
+ "gpio12",
+};
+
+static const char * const qspi_data_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11",
+};
+
+static const char * const resout_groups[] = {
+ "gpio20",
+};
+
+static const char * const rx0_groups[] = {
+ "gpio48",
+};
+
+static const char * const rx1_groups[] = {
+ "gpio45",
+};
+
+static const char * const sdc_clk_groups[] = {
+ "gpio13",
+};
+
+static const char * const sdc_cmd_groups[] = {
+ "gpio12",
+};
+
+static const char * const sdc_data_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11",
+};
+
+static const char * const tsens_max_groups[] = {
+ "gpio28",
+};
+
+static const char * const wci0_groups[] = {
+ "gpio0", "gpio0",
+};
+
+static const char * const wci1_groups[] = {
+ "gpio1", "gpio1",
+};
+
+static const char * const wci10_groups[] = {
+ "gpio35",
+};
+
+static const char * const wci11_groups[] = {
+ "gpio36", "gpio36",
+};
+
+static const char * const wci2_groups[] = {
+ "gpio2", "gpio2",
+};
+
+static const char * const wci3_groups[] = {
+ "gpio3", "gpio3",
+};
+
+static const char * const wci4_groups[] = {
+ "gpio4", "gpio4",
+};
+
+static const char * const wci5_groups[] = {
+ "gpio5", "gpio5",
+};
+
+static const char * const wci6_groups[] = {
+ "gpio6", "gpio6",
+};
+
+static const char * const wci7_groups[] = {
+ "gpio7", "gpio7",
+};
+
+static const char * const wci8_groups[] = {
+ "gpio43", "gpio43",
+};
+
+static const char * const wci9_groups[] = {
+ "gpio45", "gpio45",
+};
+
+static const char * const wsi_clk_groups[] = {
+ "gpio40", "gpio42",
+};
+
+static const char * const wsi_clk3_groups[] = {
+ "gpio43",
+};
+
+static const char * const wsi_data_groups[] = {
+ "gpio41", "gpio52",
+};
+
+static const char * const wsi_data3_groups[] = {
+ "gpio44",
+};
+
+static const char * const wsis_reset_groups[] = {
+ "gpio41",
+};
+
+static const char * const xfem0_groups[] = {
+ "gpio0",
+};
+
+static const char * const xfem1_groups[] = {
+ "gpio1",
+};
+
+static const char * const xfem2_groups[] = {
+ "gpio2",
+};
+
+static const char * const xfem3_groups[] = {
+ "gpio3",
+};
+
+static const char * const xfem4_groups[] = {
+ "gpio4",
+};
+
+static const char * const xfem5_groups[] = {
+ "gpio5",
+};
+
+static const char * const xfem6_groups[] = {
+ "gpio6",
+};
+
+static const char * const xfem7_groups[] = {
+ "gpio7",
+};
+
+static const struct msm_function ipq5332_functions[] = {
+ FUNCTION(PTA_0),
+ FUNCTION(PTA_1),
+ FUNCTION(PTA_2),
+ FUNCTION(atest_char),
+ FUNCTION(atest_char0),
+ FUNCTION(atest_char1),
+ FUNCTION(atest_char2),
+ FUNCTION(atest_char3),
+ FUNCTION(atest_tic),
+ FUNCTION(audio_pri),
+ FUNCTION(audio_pri0),
+ FUNCTION(audio_pri1),
+ FUNCTION(audio_sec),
+ FUNCTION(audio_sec0),
+ FUNCTION(audio_sec1),
+ FUNCTION(blsp0_i2c),
+ FUNCTION(blsp0_spi),
+ FUNCTION(blsp0_uart0),
+ FUNCTION(blsp0_uart1),
+ FUNCTION(blsp1_i2c0),
+ FUNCTION(blsp1_i2c1),
+ FUNCTION(blsp1_spi0),
+ FUNCTION(blsp1_spi1),
+ FUNCTION(blsp1_uart0),
+ FUNCTION(blsp1_uart1),
+ FUNCTION(blsp1_uart2),
+ FUNCTION(blsp2_i2c0),
+ FUNCTION(blsp2_i2c1),
+ FUNCTION(blsp2_spi),
+ FUNCTION(blsp2_spi0),
+ FUNCTION(blsp2_spi1),
+ FUNCTION(core_voltage),
+ FUNCTION(cri_trng0),
+ FUNCTION(cri_trng1),
+ FUNCTION(cri_trng2),
+ FUNCTION(cri_trng3),
+ FUNCTION(cxc_clk),
+ FUNCTION(cxc_data),
+ FUNCTION(dbg_out),
+ FUNCTION(gcc_plltest),
+ FUNCTION(gcc_tlmm),
+ FUNCTION(gpio),
+ FUNCTION(lock_det),
+ FUNCTION(mac0),
+ FUNCTION(mac1),
+ FUNCTION(mdc0),
+ FUNCTION(mdc1),
+ FUNCTION(mdio0),
+ FUNCTION(mdio1),
+ FUNCTION(pc),
+ FUNCTION(pcie0_clk),
+ FUNCTION(pcie0_wake),
+ FUNCTION(pcie1_clk),
+ FUNCTION(pcie1_wake),
+ FUNCTION(pcie2_clk),
+ FUNCTION(pcie2_wake),
+ FUNCTION(pll_test),
+ FUNCTION(prng_rosc0),
+ FUNCTION(prng_rosc1),
+ FUNCTION(prng_rosc2),
+ FUNCTION(prng_rosc3),
+ FUNCTION(pwm0),
+ FUNCTION(pwm1),
+ FUNCTION(pwm2),
+ FUNCTION(pwm3),
+ FUNCTION(qdss_cti_trig_in_a0),
+ FUNCTION(qdss_cti_trig_in_a1),
+ FUNCTION(qdss_cti_trig_in_b0),
+ FUNCTION(qdss_cti_trig_in_b1),
+ FUNCTION(qdss_cti_trig_out_a0),
+ FUNCTION(qdss_cti_trig_out_a1),
+ FUNCTION(qdss_cti_trig_out_b0),
+ FUNCTION(qdss_cti_trig_out_b1),
+ FUNCTION(qdss_traceclk_a),
+ FUNCTION(qdss_traceclk_b),
+ FUNCTION(qdss_tracectl_a),
+ FUNCTION(qdss_tracectl_b),
+ FUNCTION(qdss_tracedata_a),
+ FUNCTION(qdss_tracedata_b),
+ FUNCTION(qspi_data),
+ FUNCTION(qspi_clk),
+ FUNCTION(qspi_cs),
+ FUNCTION(resout),
+ FUNCTION(rx0),
+ FUNCTION(rx1),
+ FUNCTION(sdc_data),
+ FUNCTION(sdc_clk),
+ FUNCTION(sdc_cmd),
+ FUNCTION(tsens_max),
+ FUNCTION(wci0),
+ FUNCTION(wci1),
+ FUNCTION(wci10),
+ FUNCTION(wci11),
+ FUNCTION(wci2),
+ FUNCTION(wci3),
+ FUNCTION(wci4),
+ FUNCTION(wci5),
+ FUNCTION(wci6),
+ FUNCTION(wci7),
+ FUNCTION(wci8),
+ FUNCTION(wci9),
+ FUNCTION(wsi_clk),
+ FUNCTION(wsi_clk3),
+ FUNCTION(wsi_data),
+ FUNCTION(wsi_data3),
+ FUNCTION(wsis_reset),
+ FUNCTION(xfem0),
+ FUNCTION(xfem1),
+ FUNCTION(xfem2),
+ FUNCTION(xfem3),
+ FUNCTION(xfem4),
+ FUNCTION(xfem5),
+ FUNCTION(xfem6),
+ FUNCTION(xfem7),
+};
+
+static const struct msm_pingroup ipq5332_groups[] = {
+ PINGROUP(0, atest_char0, wci0, wci0, xfem0, _, _, _, _, _),
+ PINGROUP(1, atest_char1, wci1, wci1, xfem1, _, _, _, _, _),
+ PINGROUP(2, atest_char2, wci2, wci2, xfem2, _, _, _, _, _),
+ PINGROUP(3, atest_char3, wci3, wci3, xfem3, _, _, _, _, _),
+ PINGROUP(4, qdss_cti_trig_out_a0, wci4, wci4, xfem4, _, _, _, _,
+ _),
+ PINGROUP(5, qdss_cti_trig_in_a0, wci5, wci5, xfem5, _, _, _, _, _),
+ PINGROUP(6, qdss_cti_trig_out_a1, wci6, wci6, xfem6, _, _, _, _,
+ _),
+ PINGROUP(7, qdss_cti_trig_in_a1, wci7, wci7, xfem7, _, _, _, _, _),
+ PINGROUP(8, sdc_data, qspi_data, pwm3, qdss_traceclk_a, _, _, _, _, _),
+ PINGROUP(9, sdc_data, qspi_data, pwm3, qdss_tracectl_a, _, atest_tic, _, _,
+ _),
+ PINGROUP(10, sdc_data, qspi_data, pwm3, qdss_tracedata_a, _, _, _, _, _),
+ PINGROUP(11, sdc_data, qspi_data, pwm3, qdss_tracedata_a, _, _, _, _, _),
+ PINGROUP(12, sdc_cmd, qspi_cs, qdss_tracedata_a, _, _, _, _, _,
+ _),
+ PINGROUP(13, sdc_clk, qspi_clk, qdss_tracedata_a, _, _, _, _, _,
+ _),
+ PINGROUP(14, blsp0_spi, blsp1_uart0, qdss_tracedata_a, _, _, _, _,
+ _, _),
+ PINGROUP(15, blsp0_spi, blsp1_uart0, qdss_tracedata_a, _, _, _, _,
+ _, _),
+ PINGROUP(16, blsp0_spi, blsp0_i2c, blsp1_uart0, _, qdss_tracedata_a,
+ _, _, _, _),
+ PINGROUP(17, blsp0_spi, blsp0_i2c, blsp1_uart0, _, cri_trng0,
+ qdss_tracedata_a, _, _, _),
+ PINGROUP(18, blsp0_uart0, mac0, _, cri_trng1, qdss_tracedata_a, _,
+ _, _, _),
+ PINGROUP(19, blsp0_uart0, mac1, _, cri_trng2, qdss_tracedata_a, _,
+ _, _, _),
+ PINGROUP(20, resout, _, cri_trng3, qdss_tracedata_a, _, _, _, _,
+ _),
+ PINGROUP(21, core_voltage, _, _, _, _, _, _, _, _),
+ PINGROUP(22, _, prng_rosc0, qdss_tracedata_a, _, _, _, _, _, _),
+ PINGROUP(23, core_voltage, _, _, _, _, _, _, _, _),
+ PINGROUP(24, _, prng_rosc1, qdss_tracedata_a, _, _, _, _, _, _),
+ PINGROUP(25, mdc0, blsp1_uart1, blsp1_spi1, pwm2, _, _, prng_rosc2,
+ qdss_tracedata_a, _),
+ PINGROUP(26, mdio0, blsp1_uart1, blsp1_spi1, pwm2, _, _, prng_rosc3,
+ qdss_tracedata_a, _),
+ PINGROUP(27, mdc1, blsp0_uart1, blsp1_uart1, blsp1_spi1, pwm2, _, _,
+ qdss_tracedata_a, _),
+ PINGROUP(28, mdio1, blsp0_uart1, blsp1_uart1, blsp1_spi1, pwm2, _,
+ tsens_max, _, _),
+ PINGROUP(29, audio_pri, blsp1_spi0, blsp1_i2c0, pwm1, _,
+ qdss_tracedata_b, _, _, _),
+ PINGROUP(30, audio_pri, blsp1_spi0, blsp1_i2c0, pwm1, audio_sec0,
+ audio_sec0, _, qdss_tracedata_b, _),
+ PINGROUP(31, audio_pri, blsp1_spi0, pwm1, _, qdss_tracedata_b, _, _,
+ _, _),
+ PINGROUP(32, audio_pri, blsp1_spi0, pwm1, _, qdss_tracedata_b, _, _,
+ _, _),
+ PINGROUP(33, audio_sec, blsp1_uart2, blsp2_i2c1, blsp2_spi0, _,
+ qdss_tracedata_b, _, _, _),
+ PINGROUP(34, audio_sec, blsp1_uart2, blsp2_i2c1, blsp2_spi0,
+ audio_pri0, audio_pri0, _, qdss_tracedata_b, _),
+ PINGROUP(35, audio_sec, blsp1_uart2, pc, wci10, blsp2_spi0,
+ _, qdss_tracedata_b, _, _),
+ PINGROUP(36, audio_sec, blsp1_uart2, wci11, wci11, blsp2_spi0,
+ _, qdss_tracedata_b, _, _),
+ PINGROUP(37, pcie0_clk, blsp2_spi, _, qdss_tracedata_b, _, _, _,
+ _, _),
+ PINGROUP(38, _, qdss_tracedata_b, _, _, _, _, _, _, _),
+ PINGROUP(39, pcie0_wake, _, qdss_tracedata_b, _, _, _, _, _, _),
+ PINGROUP(40, wsi_clk, blsp1_i2c1, blsp2_spi1, _, _, qdss_tracedata_b,
+ _, _, _),
+ PINGROUP(41, wsi_data, blsp1_i2c1, blsp2_spi1, _, _,
+ qdss_tracedata_b, _, wsis_reset, _),
+ PINGROUP(42, wsi_clk, blsp2_spi1, _, qdss_tracedata_b, _, _, _, _,
+ _),
+ PINGROUP(43, pcie2_clk, wci8, wci8, blsp2_i2c0, pwm0, audio_pri1,
+ audio_pri1, _, gcc_plltest),
+ PINGROUP(44, pwm0, _, gcc_tlmm, qdss_tracectl_b, _, wsi_data3, _,
+ _, _),
+ PINGROUP(45, pcie2_wake, wci9, wci9, blsp2_i2c0, rx1, pwm0, audio_sec1,
+ audio_sec1, _),
+ PINGROUP(46, pcie1_clk, atest_char, pwm0, _, qdss_cti_trig_out_b0, _,
+ _, _, _),
+ PINGROUP(47, _, qdss_cti_trig_in_b0, _, _, _, _, _, _, _),
+ PINGROUP(48, pcie1_wake, rx0, dbg_out, qdss_cti_trig_out_b1, _, _,
+ _, _, _),
+ PINGROUP(49, PTA_0, cxc_clk, pll_test, _, qdss_cti_trig_in_b1, _, _,
+ _, _),
+ PINGROUP(50, PTA_1, cxc_data, _, _, _, _, _, _, _),
+ PINGROUP(51, PTA_2, lock_det, _, _, _, _, _, _, _),
+ PINGROUP(52, wsi_data, blsp2_spi1, _, qdss_tracedata_b, _, _, _,
+ _, _),
+};
+
+static const struct msm_pinctrl_soc_data ipq5332_pinctrl = {
+ .pins = ipq5332_pins,
+ .npins = ARRAY_SIZE(ipq5332_pins),
+ .functions = ipq5332_functions,
+ .nfunctions = ARRAY_SIZE(ipq5332_functions),
+ .groups = ipq5332_groups,
+ .ngroups = ARRAY_SIZE(ipq5332_groups),
+ .ngpios = 53,
+};
+
+static int ipq5332_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &ipq5332_pinctrl);
+}
+
+static const struct of_device_id ipq5332_pinctrl_of_match[] = {
+ { .compatible = "qcom,ipq5332-tlmm", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ipq5332_pinctrl_of_match);
+
+static struct platform_driver ipq5332_pinctrl_driver = {
+ .driver = {
+ .name = "ipq5332-tlmm",
+ .of_match_table = ipq5332_pinctrl_of_match,
+ },
+ .probe = ipq5332_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init ipq5332_pinctrl_init(void)
+{
+ return platform_driver_register(&ipq5332_pinctrl_driver);
+}
+arch_initcall(ipq5332_pinctrl_init);
+
+static void __exit ipq5332_pinctrl_exit(void)
+{
+ platform_driver_unregister(&ipq5332_pinctrl_driver);
+}
+module_exit(ipq5332_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI IPQ5332 TLMM driver");
+MODULE_LICENSE("GPL");
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 03/10] clk: qcom: Add STROMER PLUS PLL type for IPQ5332
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add the support for stromer plus pll, which is found on the IPQ5332
SoCs. Programming sequence is same as the stromer pll, so we can re-use
the same.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
drivers/clk/qcom/clk-alpha-pll.c | 11 +++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 1 +
2 files changed, 12 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index d841ec414072..cd23a85e27c4 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -216,6 +216,17 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_TEST_CTL_U] = 0x34,
[PLL_OFF_STATUS] = 0x28,
},
+ [CLK_ALPHA_PLL_TYPE_STROMER_PLUS] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_USER_CTL] = 0x08,
+ [PLL_OFF_USER_CTL_U] = 0x0c,
+ [PLL_OFF_CONFIG_CTL] = 0x10,
+ [PLL_OFF_TEST_CTL] = 0x14,
+ [PLL_OFF_TEST_CTL_U] = 0x18,
+ [PLL_OFF_STATUS] = 0x1c,
+ [PLL_OFF_ALPHA_VAL] = 0x24,
+ [PLL_OFF_ALPHA_VAL_U] = 0x28,
+ },
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 33b8badb9fb0..64c492fc2288 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -27,6 +27,7 @@ enum {
CLK_ALPHA_PLL_TYPE_DEFAULT_EVO,
CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
CLK_ALPHA_PLL_TYPE_STROMER,
+ CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
CLK_ALPHA_PLL_TYPE_MAX,
};
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 03/10] clk: qcom: Add STROMER PLUS PLL type for IPQ5332
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add the support for stromer plus pll, which is found on the IPQ5332
SoCs. Programming sequence is same as the stromer pll, so we can re-use
the same.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
drivers/clk/qcom/clk-alpha-pll.c | 11 +++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 1 +
2 files changed, 12 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index d841ec414072..cd23a85e27c4 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -216,6 +216,17 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_TEST_CTL_U] = 0x34,
[PLL_OFF_STATUS] = 0x28,
},
+ [CLK_ALPHA_PLL_TYPE_STROMER_PLUS] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_USER_CTL] = 0x08,
+ [PLL_OFF_USER_CTL_U] = 0x0c,
+ [PLL_OFF_CONFIG_CTL] = 0x10,
+ [PLL_OFF_TEST_CTL] = 0x14,
+ [PLL_OFF_TEST_CTL_U] = 0x18,
+ [PLL_OFF_STATUS] = 0x1c,
+ [PLL_OFF_ALPHA_VAL] = 0x24,
+ [PLL_OFF_ALPHA_VAL_U] = 0x28,
+ },
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 33b8badb9fb0..64c492fc2288 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -27,6 +27,7 @@ enum {
CLK_ALPHA_PLL_TYPE_DEFAULT_EVO,
CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
CLK_ALPHA_PLL_TYPE_STROMER,
+ CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
CLK_ALPHA_PLL_TYPE_MAX,
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add binding for the Qualcomm IPQ5332 Global Clock Controller.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
.../bindings/clock/qcom,ipq5332-gcc.yaml | 55 +++
include/dt-bindings/clock/qcom,gcc-ipq5332.h | 359 ++++++++++++++++++
2 files changed, 414 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5332.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
new file mode 100644
index 000000000000..42d55f6bffcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5332-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5332
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on IPQ5332.
+
+ See also:: include/dt-bindings/clock/qcom,gcc-ipq5332.h
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq5332-gcc
+
+ clocks:
+ items:
+ - description: Board XO clock source
+ - description: Sleep clock source
+ - description: PCIE 2lane PHY pipe clock source
+ - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
+ - description: USB PCIE wrapper pipe clock source
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep_clk
+ - const: pcie_2lane_phy_pipe_clk
+ - const: pcie_2lane_phy_pipe_clk_x1
+ - const: usb_pcie_wrapper_pipe_clk
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ clock-controller@1800000 {
+ compatible = "qcom,ipq5332-gcc";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5332.h b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
new file mode 100644
index 000000000000..a305c648b724
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
@@ -0,0 +1,359 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_IPQ5332_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_IPQ5332_H
+
+#define GPLL0_MAIN 0
+#define GPLL0 1
+#define GPLL2_MAIN 2
+#define GPLL2 3
+#define GPLL4_MAIN 4
+#define GPLL4 5
+#define GCC_ADSS_PWM_CLK 6
+#define GCC_ADSS_PWM_CLK_SRC 7
+#define GCC_AHB_CLK 8
+#define GCC_APSS_AHB_CLK 9
+#define GCC_APSS_AHB_CLK_SRC 10
+#define GCC_APSS_AXI_CLK 11
+#define GCC_APSS_AXI_CLK_SRC 12
+#define GCC_BLSP1_AHB_CLK 13
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK 14
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK 15
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC 16
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK 17
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK 18
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC 19
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK 20
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK 21
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC 22
+#define GCC_BLSP1_SLEEP_CLK 23
+#define GCC_BLSP1_UART1_APPS_CLK 24
+#define GCC_BLSP1_UART1_APPS_CLK_SRC 25
+#define GCC_BLSP1_UART2_APPS_CLK 26
+#define GCC_BLSP1_UART2_APPS_CLK_SRC 27
+#define GCC_BLSP1_UART3_APPS_CLK 28
+#define GCC_BLSP1_UART3_APPS_CLK_SRC 29
+#define GCC_CE_AHB_CLK 30
+#define GCC_CE_AXI_CLK 31
+#define GCC_CE_PCNOC_AHB_CLK 32
+#define GCC_CMN_12GPLL_AHB_CLK 33
+#define GCC_CMN_12GPLL_APU_CLK 34
+#define GCC_CMN_12GPLL_SYS_CLK 35
+#define GCC_GP1_CLK 36
+#define GCC_GP1_CLK_SRC 37
+#define GCC_GP2_CLK 38
+#define GCC_GP2_CLK_SRC 39
+#define GCC_LPASS_CORE_AXIM_CLK 40
+#define GCC_LPASS_SWAY_CLK 41
+#define GCC_LPASS_SWAY_CLK_SRC 42
+#define GCC_MDIO_AHB_CLK 43
+#define GCC_MDIO_SLAVE_AHB_CLK 44
+#define GCC_MEM_NOC_Q6_AXI_CLK 45
+#define GCC_MEM_NOC_TS_CLK 46
+#define GCC_NSS_TS_CLK 47
+#define GCC_NSS_TS_CLK_SRC 48
+#define GCC_NSSCC_CLK 49
+#define GCC_NSSCFG_CLK 50
+#define GCC_NSSNOC_ATB_CLK 51
+#define GCC_NSSNOC_NSSCC_CLK 52
+#define GCC_NSSNOC_QOSGEN_REF_CLK 53
+#define GCC_NSSNOC_SNOC_1_CLK 54
+#define GCC_NSSNOC_SNOC_CLK 55
+#define GCC_NSSNOC_TIMEOUT_REF_CLK 56
+#define GCC_NSSNOC_XO_DCD_CLK 57
+#define GCC_PCIE3X1_0_AHB_CLK 58
+#define GCC_PCIE3X1_0_AUX_CLK 59
+#define GCC_PCIE3X1_0_AXI_CLK_SRC 60
+#define GCC_PCIE3X1_0_AXI_M_CLK 61
+#define GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK 62
+#define GCC_PCIE3X1_0_AXI_S_CLK 63
+#define GCC_PCIE3X1_0_PIPE_CLK 64
+#define GCC_PCIE3X1_0_RCHG_CLK 65
+#define GCC_PCIE3X1_0_RCHG_CLK_SRC 66
+#define GCC_PCIE3X1_1_AHB_CLK 67
+#define GCC_PCIE3X1_1_AUX_CLK 68
+#define GCC_PCIE3X1_1_AXI_CLK_SRC 69
+#define GCC_PCIE3X1_1_AXI_M_CLK 70
+#define GCC_PCIE3X1_1_AXI_S_BRIDGE_CLK 71
+#define GCC_PCIE3X1_1_AXI_S_CLK 72
+#define GCC_PCIE3X1_1_PIPE_CLK 73
+#define GCC_PCIE3X1_1_RCHG_CLK 74
+#define GCC_PCIE3X1_1_RCHG_CLK_SRC 75
+#define GCC_PCIE3X1_PHY_AHB_CLK 76
+#define GCC_PCIE3X2_AHB_CLK 77
+#define GCC_PCIE3X2_AUX_CLK 78
+#define GCC_PCIE3X2_AXI_M_CLK 79
+#define GCC_PCIE3X2_AXI_M_CLK_SRC 80
+#define GCC_PCIE3X2_AXI_S_BRIDGE_CLK 81
+#define GCC_PCIE3X2_AXI_S_CLK 82
+#define GCC_PCIE3X2_AXI_S_CLK_SRC 83
+#define GCC_PCIE3X2_PHY_AHB_CLK 84
+#define GCC_PCIE3X2_PIPE_CLK 85
+#define GCC_PCIE3X2_RCHG_CLK 86
+#define GCC_PCIE3X2_RCHG_CLK_SRC 87
+#define GCC_PCIE_AUX_CLK_SRC 88
+#define GCC_PCNOC_AT_CLK 89
+#define GCC_PCNOC_BFDCD_CLK_SRC 90
+#define GCC_PCNOC_LPASS_CLK 91
+#define GCC_PRNG_AHB_CLK 92
+#define GCC_Q6_AHB_CLK 93
+#define GCC_Q6_AHB_S_CLK 94
+#define GCC_Q6_AXIM_CLK 95
+#define GCC_Q6_AXIM_CLK_SRC 96
+#define GCC_Q6_AXIS_CLK 97
+#define GCC_Q6_TSCTR_1TO2_CLK 98
+#define GCC_Q6SS_ATBM_CLK 99
+#define GCC_Q6SS_PCLKDBG_CLK 100
+#define GCC_Q6SS_TRIG_CLK 101
+#define GCC_QDSS_AT_CLK 102
+#define GCC_QDSS_AT_CLK_SRC 103
+#define GCC_QDSS_CFG_AHB_CLK 104
+#define GCC_QDSS_DAP_AHB_CLK 105
+#define GCC_QDSS_DAP_CLK 106
+#define GCC_QDSS_DAP_DIV_CLK_SRC 107
+#define GCC_QDSS_ETR_USB_CLK 108
+#define GCC_QDSS_EUD_AT_CLK 109
+#define GCC_QDSS_TSCTR_CLK_SRC 110
+#define GCC_QPIC_AHB_CLK 111
+#define GCC_QPIC_CLK 112
+#define GCC_QPIC_IO_MACRO_CLK 113
+#define GCC_QPIC_IO_MACRO_CLK_SRC 114
+#define GCC_QPIC_SLEEP_CLK 115
+#define GCC_SDCC1_AHB_CLK 116
+#define GCC_SDCC1_APPS_CLK 117
+#define GCC_SDCC1_APPS_CLK_SRC 118
+#define GCC_SLEEP_CLK_SRC 119
+#define GCC_SNOC_LPASS_CFG_CLK 120
+#define GCC_SNOC_NSSNOC_1_CLK 121
+#define GCC_SNOC_NSSNOC_CLK 122
+#define GCC_SNOC_PCIE3_1LANE_1_M_CLK 123
+#define GCC_SNOC_PCIE3_1LANE_1_S_CLK 124
+#define GCC_SNOC_PCIE3_1LANE_M_CLK 125
+#define GCC_SNOC_PCIE3_1LANE_S_CLK 126
+#define GCC_SNOC_PCIE3_2LANE_M_CLK 127
+#define GCC_SNOC_PCIE3_2LANE_S_CLK 128
+#define GCC_SNOC_USB_CLK 129
+#define GCC_SYS_NOC_AT_CLK 130
+#define GCC_SYS_NOC_WCSS_AHB_CLK 131
+#define GCC_SYSTEM_NOC_BFDCD_CLK_SRC 132
+#define GCC_UNIPHY0_AHB_CLK 133
+#define GCC_UNIPHY0_SYS_CLK 134
+#define GCC_UNIPHY1_AHB_CLK 135
+#define GCC_UNIPHY1_SYS_CLK 136
+#define GCC_UNIPHY_SYS_CLK_SRC 137
+#define GCC_USB0_AUX_CLK 138
+#define GCC_USB0_AUX_CLK_SRC 139
+#define GCC_USB0_EUD_AT_CLK 140
+#define GCC_USB0_LFPS_CLK 141
+#define GCC_USB0_LFPS_CLK_SRC 142
+#define GCC_USB0_MASTER_CLK 143
+#define GCC_USB0_MASTER_CLK_SRC 144
+#define GCC_USB0_MOCK_UTMI_CLK 145
+#define GCC_USB0_MOCK_UTMI_CLK_SRC 146
+#define GCC_USB0_MOCK_UTMI_DIV_CLK_SRC 147
+#define GCC_USB0_PHY_CFG_AHB_CLK 148
+#define GCC_USB0_PIPE_CLK 149
+#define GCC_USB0_SLEEP_CLK 150
+#define GCC_WCSS_AHB_CLK_SRC 151
+#define GCC_WCSS_AXIM_CLK 152
+#define GCC_WCSS_AXIS_CLK 153
+#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 154
+#define GCC_WCSS_DBG_IFC_APB_CLK 155
+#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 156
+#define GCC_WCSS_DBG_IFC_ATB_CLK 157
+#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 158
+#define GCC_WCSS_DBG_IFC_NTS_CLK 159
+#define GCC_WCSS_ECAHB_CLK 160
+#define GCC_WCSS_MST_ASYNC_BDG_CLK 161
+#define GCC_WCSS_SLV_ASYNC_BDG_CLK 162
+#define GCC_XO_CLK 163
+#define GCC_XO_CLK_SRC 164
+#define GCC_XO_DIV4_CLK 165
+#define GCC_IM_SLEEP_CLK 166
+#define GCC_NSSNOC_PCNOC_1_CLK 167
+#define GCC_MEM_NOC_AHB_CLK 168
+#define GCC_MEM_NOC_APSS_AXI_CLK 169
+#define GCC_SNOC_QOSGEN_EXTREF_DIV_CLK_SRC 170
+#define GCC_MEM_NOC_QOSGEN_EXTREF_CLK 171
+#define GCC_PCIE3X2_PIPE_CLK_SRC 172
+#define GCC_PCIE3X1_0_PIPE_CLK_SRC 173
+#define GCC_PCIE3X1_1_PIPE_CLK_SRC 174
+#define GCC_USB0_PIPE_CLK_SRC 175
+
+#define GCC_ADSS_BCR 0
+#define GCC_ADSS_PWM_CLK_ARES 1
+#define GCC_AHB_CLK_ARES 2
+#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 3
+#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_GPLL0_CLK_ARES 4
+#define GCC_APSS_AHB_CLK_ARES 5
+#define GCC_APSS_AXI_CLK_ARES 6
+#define GCC_BLSP1_AHB_CLK_ARES 7
+#define GCC_BLSP1_BCR 8
+#define GCC_BLSP1_QUP1_BCR 9
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK_ARES 10
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK_ARES 11
+#define GCC_BLSP1_QUP2_BCR 12
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK_ARES 13
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK_ARES 14
+#define GCC_BLSP1_QUP3_BCR 15
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK_ARES 16
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK_ARES 17
+#define GCC_BLSP1_SLEEP_CLK_ARES 18
+#define GCC_BLSP1_UART1_APPS_CLK_ARES 19
+#define GCC_BLSP1_UART1_BCR 20
+#define GCC_BLSP1_UART2_APPS_CLK_ARES 21
+#define GCC_BLSP1_UART2_BCR 22
+#define GCC_BLSP1_UART3_APPS_CLK_ARES 23
+#define GCC_BLSP1_UART3_BCR 24
+#define GCC_CE_BCR 25
+#define GCC_CMN_BLK_BCR 26
+#define GCC_CMN_LDO0_BCR 27
+#define GCC_CMN_LDO1_BCR 28
+#define GCC_DCC_BCR 29
+#define GCC_GP1_CLK_ARES 30
+#define GCC_GP2_CLK_ARES 31
+#define GCC_LPASS_BCR 32
+#define GCC_LPASS_CORE_AXIM_CLK_ARES 33
+#define GCC_LPASS_SWAY_CLK_ARES 34
+#define GCC_MDIOM_BCR 35
+#define GCC_MDIOS_BCR 36
+#define GCC_NSS_BCR 37
+#define GCC_NSS_TS_CLK_ARES 38
+#define GCC_NSSCC_CLK_ARES 39
+#define GCC_NSSCFG_CLK_ARES 40
+#define GCC_NSSNOC_ATB_CLK_ARES 41
+#define GCC_NSSNOC_NSSCC_CLK_ARES 42
+#define GCC_NSSNOC_QOSGEN_REF_CLK_ARES 43
+#define GCC_NSSNOC_SNOC_1_CLK_ARES 44
+#define GCC_NSSNOC_SNOC_CLK_ARES 45
+#define GCC_NSSNOC_TIMEOUT_REF_CLK_ARES 46
+#define GCC_NSSNOC_XO_DCD_CLK_ARES 47
+#define GCC_PCIE3X1_0_AHB_CLK_ARES 48
+#define GCC_PCIE3X1_0_AUX_CLK_ARES 49
+#define GCC_PCIE3X1_0_AXI_M_CLK_ARES 50
+#define GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK_ARES 51
+#define GCC_PCIE3X1_0_AXI_S_CLK_ARES 52
+#define GCC_PCIE3X1_0_BCR 53
+#define GCC_PCIE3X1_0_LINK_DOWN_BCR 54
+#define GCC_PCIE3X1_0_PHY_BCR 55
+#define GCC_PCIE3X1_0_PHY_PHY_BCR 56
+#define GCC_PCIE3X1_1_AHB_CLK_ARES 57
+#define GCC_PCIE3X1_1_AUX_CLK_ARES 58
+#define GCC_PCIE3X1_1_AXI_M_CLK_ARES 59
+#define GCC_PCIE3X1_1_AXI_S_BRIDGE_CLK_ARES 60
+#define GCC_PCIE3X1_1_AXI_S_CLK_ARES 61
+#define GCC_PCIE3X1_1_BCR 62
+#define GCC_PCIE3X1_1_LINK_DOWN_BCR 63
+#define GCC_PCIE3X1_1_PHY_BCR 64
+#define GCC_PCIE3X1_1_PHY_PHY_BCR 65
+#define GCC_PCIE3X1_PHY_AHB_CLK_ARES 66
+#define GCC_PCIE3X2_AHB_CLK_ARES 67
+#define GCC_PCIE3X2_AUX_CLK_ARES 68
+#define GCC_PCIE3X2_AXI_M_CLK_ARES 69
+#define GCC_PCIE3X2_AXI_S_BRIDGE_CLK_ARES 70
+#define GCC_PCIE3X2_AXI_S_CLK_ARES 71
+#define GCC_PCIE3X2_BCR 72
+#define GCC_PCIE3X2_LINK_DOWN_BCR 73
+#define GCC_PCIE3X2_PHY_AHB_CLK_ARES 74
+#define GCC_PCIE3X2_PHY_BCR 75
+#define GCC_PCIE3X2PHY_PHY_BCR 76
+#define GCC_PCNOC_BCR 77
+#define GCC_PCNOC_LPASS_CLK_ARES 78
+#define GCC_PRNG_AHB_CLK_ARES 79
+#define GCC_PRNG_BCR 80
+#define GCC_Q6_AHB_CLK_ARES 81
+#define GCC_Q6_AHB_S_CLK_ARES 82
+#define GCC_Q6_AXIM_CLK_ARES 83
+#define GCC_Q6_AXIS_CLK_ARES 84
+#define GCC_Q6_TSCTR_1TO2_CLK_ARES 85
+#define GCC_Q6SS_ATBM_CLK_ARES 86
+#define GCC_Q6SS_PCLKDBG_CLK_ARES 87
+#define GCC_Q6SS_TRIG_CLK_ARES 88
+#define GCC_QDSS_APB2JTAG_CLK_ARES 89
+#define GCC_QDSS_AT_CLK_ARES 90
+#define GCC_QDSS_BCR 91
+#define GCC_QDSS_CFG_AHB_CLK_ARES 92
+#define GCC_QDSS_DAP_AHB_CLK_ARES 93
+#define GCC_QDSS_DAP_CLK_ARES 94
+#define GCC_QDSS_ETR_USB_CLK_ARES 95
+#define GCC_QDSS_EUD_AT_CLK_ARES 96
+#define GCC_QDSS_STM_CLK_ARES 97
+#define GCC_QDSS_TRACECLKIN_CLK_ARES 98
+#define GCC_QDSS_TS_CLK_ARES 99
+#define GCC_QDSS_TSCTR_DIV16_CLK_ARES 100
+#define GCC_QDSS_TSCTR_DIV2_CLK_ARES 101
+#define GCC_QDSS_TSCTR_DIV3_CLK_ARES 102
+#define GCC_QDSS_TSCTR_DIV4_CLK_ARES 103
+#define GCC_QDSS_TSCTR_DIV8_CLK_ARES 104
+#define GCC_QPIC_AHB_CLK_ARES 105
+#define GCC_QPIC_CLK_ARES 106
+#define GCC_QPIC_BCR 107
+#define GCC_QPIC_IO_MACRO_CLK_ARES 108
+#define GCC_QPIC_SLEEP_CLK_ARES 109
+#define GCC_QUSB2_0_PHY_BCR 110
+#define GCC_SDCC1_AHB_CLK_ARES 111
+#define GCC_SDCC1_APPS_CLK_ARES 112
+#define GCC_SDCC_BCR 113
+#define GCC_SNOC_BCR 114
+#define GCC_SNOC_LPASS_CFG_CLK_ARES 115
+#define GCC_SNOC_NSSNOC_1_CLK_ARES 116
+#define GCC_SNOC_NSSNOC_CLK_ARES 117
+#define GCC_SYS_NOC_QDSS_STM_AXI_CLK_ARES 118
+#define GCC_SYS_NOC_WCSS_AHB_CLK_ARES 119
+#define GCC_UNIPHY0_AHB_CLK_ARES 120
+#define GCC_UNIPHY0_BCR 121
+#define GCC_UNIPHY0_SYS_CLK_ARES 122
+#define GCC_UNIPHY1_AHB_CLK_ARES 123
+#define GCC_UNIPHY1_BCR 124
+#define GCC_UNIPHY1_SYS_CLK_ARES 125
+#define GCC_USB0_AUX_CLK_ARES 126
+#define GCC_USB0_EUD_AT_CLK_ARES 127
+#define GCC_USB0_LFPS_CLK_ARES 128
+#define GCC_USB0_MASTER_CLK_ARES 129
+#define GCC_USB0_MOCK_UTMI_CLK_ARES 130
+#define GCC_USB0_PHY_BCR 131
+#define GCC_USB0_PHY_CFG_AHB_CLK_ARES 132
+#define GCC_USB0_SLEEP_CLK_ARES 133
+#define GCC_USB3PHY_0_PHY_BCR 134
+#define GCC_USB_BCR 135
+#define GCC_WCSS_AXIM_CLK_ARES 136
+#define GCC_WCSS_AXIS_CLK_ARES 137
+#define GCC_WCSS_BCR 138
+#define GCC_WCSS_DBG_IFC_APB_BDG_CLK_ARES 139
+#define GCC_WCSS_DBG_IFC_APB_CLK_ARES 140
+#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK_ARES 141
+#define GCC_WCSS_DBG_IFC_ATB_CLK_ARES 142
+#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK_ARES 143
+#define GCC_WCSS_DBG_IFC_NTS_CLK_ARES 144
+#define GCC_WCSS_ECAHB_CLK_ARES 145
+#define GCC_WCSS_MST_ASYNC_BDG_CLK_ARES 146
+#define GCC_WCSS_Q6_BCR 147
+#define GCC_WCSS_SLV_ASYNC_BDG_CLK_ARES 148
+#define GCC_XO_CLK_ARES 149
+#define GCC_XO_DIV4_CLK_ARES 150
+#define GCC_Q6SS_DBG_ARES 151
+#define GCC_WCSS_DBG_BDG_ARES 152
+#define GCC_WCSS_DBG_ARES 153
+#define GCC_WCSS_AXI_S_ARES 154
+#define GCC_WCSS_AXI_M_ARES 155
+#define GCC_WCSSAON_ARES 156
+#define GCC_PCIE3X2_PIPE_ARES 157
+#define GCC_PCIE3X2_CORE_STICKY_ARES 158
+#define GCC_PCIE3X2_AXI_S_STICKY_ARES 159
+#define GCC_PCIE3X2_AXI_M_STICKY_ARES 160
+#define GCC_PCIE3X1_0_PIPE_ARES 161
+#define GCC_PCIE3X1_0_CORE_STICKY_ARES 162
+#define GCC_PCIE3X1_0_AXI_S_STICKY_ARES 163
+#define GCC_PCIE3X1_0_AXI_M_STICKY_ARES 164
+#define GCC_PCIE3X1_1_PIPE_ARES 165
+#define GCC_PCIE3X1_1_CORE_STICKY_ARES 166
+#define GCC_PCIE3X1_1_AXI_S_STICKY_ARES 167
+#define GCC_PCIE3X1_1_AXI_M_STICKY_ARES 168
+#define GCC_IM_SLEEP_CLK_ARES 169
+#define GCC_NSSNOC_PCNOC_1_CLK_ARES 170
+#define GCC_UNIPHY0_XPCS_ARES 171
+#define GCC_UNIPHY1_XPCS_ARES 172
+#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add binding for the Qualcomm IPQ5332 Global Clock Controller.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
.../bindings/clock/qcom,ipq5332-gcc.yaml | 55 +++
include/dt-bindings/clock/qcom,gcc-ipq5332.h | 359 ++++++++++++++++++
2 files changed, 414 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5332.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
new file mode 100644
index 000000000000..42d55f6bffcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5332-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5332
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on IPQ5332.
+
+ See also:: include/dt-bindings/clock/qcom,gcc-ipq5332.h
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq5332-gcc
+
+ clocks:
+ items:
+ - description: Board XO clock source
+ - description: Sleep clock source
+ - description: PCIE 2lane PHY pipe clock source
+ - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
+ - description: USB PCIE wrapper pipe clock source
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep_clk
+ - const: pcie_2lane_phy_pipe_clk
+ - const: pcie_2lane_phy_pipe_clk_x1
+ - const: usb_pcie_wrapper_pipe_clk
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ clock-controller@1800000 {
+ compatible = "qcom,ipq5332-gcc";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5332.h b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
new file mode 100644
index 000000000000..a305c648b724
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
@@ -0,0 +1,359 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_IPQ5332_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_IPQ5332_H
+
+#define GPLL0_MAIN 0
+#define GPLL0 1
+#define GPLL2_MAIN 2
+#define GPLL2 3
+#define GPLL4_MAIN 4
+#define GPLL4 5
+#define GCC_ADSS_PWM_CLK 6
+#define GCC_ADSS_PWM_CLK_SRC 7
+#define GCC_AHB_CLK 8
+#define GCC_APSS_AHB_CLK 9
+#define GCC_APSS_AHB_CLK_SRC 10
+#define GCC_APSS_AXI_CLK 11
+#define GCC_APSS_AXI_CLK_SRC 12
+#define GCC_BLSP1_AHB_CLK 13
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK 14
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK 15
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC 16
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK 17
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK 18
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC 19
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK 20
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK 21
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC 22
+#define GCC_BLSP1_SLEEP_CLK 23
+#define GCC_BLSP1_UART1_APPS_CLK 24
+#define GCC_BLSP1_UART1_APPS_CLK_SRC 25
+#define GCC_BLSP1_UART2_APPS_CLK 26
+#define GCC_BLSP1_UART2_APPS_CLK_SRC 27
+#define GCC_BLSP1_UART3_APPS_CLK 28
+#define GCC_BLSP1_UART3_APPS_CLK_SRC 29
+#define GCC_CE_AHB_CLK 30
+#define GCC_CE_AXI_CLK 31
+#define GCC_CE_PCNOC_AHB_CLK 32
+#define GCC_CMN_12GPLL_AHB_CLK 33
+#define GCC_CMN_12GPLL_APU_CLK 34
+#define GCC_CMN_12GPLL_SYS_CLK 35
+#define GCC_GP1_CLK 36
+#define GCC_GP1_CLK_SRC 37
+#define GCC_GP2_CLK 38
+#define GCC_GP2_CLK_SRC 39
+#define GCC_LPASS_CORE_AXIM_CLK 40
+#define GCC_LPASS_SWAY_CLK 41
+#define GCC_LPASS_SWAY_CLK_SRC 42
+#define GCC_MDIO_AHB_CLK 43
+#define GCC_MDIO_SLAVE_AHB_CLK 44
+#define GCC_MEM_NOC_Q6_AXI_CLK 45
+#define GCC_MEM_NOC_TS_CLK 46
+#define GCC_NSS_TS_CLK 47
+#define GCC_NSS_TS_CLK_SRC 48
+#define GCC_NSSCC_CLK 49
+#define GCC_NSSCFG_CLK 50
+#define GCC_NSSNOC_ATB_CLK 51
+#define GCC_NSSNOC_NSSCC_CLK 52
+#define GCC_NSSNOC_QOSGEN_REF_CLK 53
+#define GCC_NSSNOC_SNOC_1_CLK 54
+#define GCC_NSSNOC_SNOC_CLK 55
+#define GCC_NSSNOC_TIMEOUT_REF_CLK 56
+#define GCC_NSSNOC_XO_DCD_CLK 57
+#define GCC_PCIE3X1_0_AHB_CLK 58
+#define GCC_PCIE3X1_0_AUX_CLK 59
+#define GCC_PCIE3X1_0_AXI_CLK_SRC 60
+#define GCC_PCIE3X1_0_AXI_M_CLK 61
+#define GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK 62
+#define GCC_PCIE3X1_0_AXI_S_CLK 63
+#define GCC_PCIE3X1_0_PIPE_CLK 64
+#define GCC_PCIE3X1_0_RCHG_CLK 65
+#define GCC_PCIE3X1_0_RCHG_CLK_SRC 66
+#define GCC_PCIE3X1_1_AHB_CLK 67
+#define GCC_PCIE3X1_1_AUX_CLK 68
+#define GCC_PCIE3X1_1_AXI_CLK_SRC 69
+#define GCC_PCIE3X1_1_AXI_M_CLK 70
+#define GCC_PCIE3X1_1_AXI_S_BRIDGE_CLK 71
+#define GCC_PCIE3X1_1_AXI_S_CLK 72
+#define GCC_PCIE3X1_1_PIPE_CLK 73
+#define GCC_PCIE3X1_1_RCHG_CLK 74
+#define GCC_PCIE3X1_1_RCHG_CLK_SRC 75
+#define GCC_PCIE3X1_PHY_AHB_CLK 76
+#define GCC_PCIE3X2_AHB_CLK 77
+#define GCC_PCIE3X2_AUX_CLK 78
+#define GCC_PCIE3X2_AXI_M_CLK 79
+#define GCC_PCIE3X2_AXI_M_CLK_SRC 80
+#define GCC_PCIE3X2_AXI_S_BRIDGE_CLK 81
+#define GCC_PCIE3X2_AXI_S_CLK 82
+#define GCC_PCIE3X2_AXI_S_CLK_SRC 83
+#define GCC_PCIE3X2_PHY_AHB_CLK 84
+#define GCC_PCIE3X2_PIPE_CLK 85
+#define GCC_PCIE3X2_RCHG_CLK 86
+#define GCC_PCIE3X2_RCHG_CLK_SRC 87
+#define GCC_PCIE_AUX_CLK_SRC 88
+#define GCC_PCNOC_AT_CLK 89
+#define GCC_PCNOC_BFDCD_CLK_SRC 90
+#define GCC_PCNOC_LPASS_CLK 91
+#define GCC_PRNG_AHB_CLK 92
+#define GCC_Q6_AHB_CLK 93
+#define GCC_Q6_AHB_S_CLK 94
+#define GCC_Q6_AXIM_CLK 95
+#define GCC_Q6_AXIM_CLK_SRC 96
+#define GCC_Q6_AXIS_CLK 97
+#define GCC_Q6_TSCTR_1TO2_CLK 98
+#define GCC_Q6SS_ATBM_CLK 99
+#define GCC_Q6SS_PCLKDBG_CLK 100
+#define GCC_Q6SS_TRIG_CLK 101
+#define GCC_QDSS_AT_CLK 102
+#define GCC_QDSS_AT_CLK_SRC 103
+#define GCC_QDSS_CFG_AHB_CLK 104
+#define GCC_QDSS_DAP_AHB_CLK 105
+#define GCC_QDSS_DAP_CLK 106
+#define GCC_QDSS_DAP_DIV_CLK_SRC 107
+#define GCC_QDSS_ETR_USB_CLK 108
+#define GCC_QDSS_EUD_AT_CLK 109
+#define GCC_QDSS_TSCTR_CLK_SRC 110
+#define GCC_QPIC_AHB_CLK 111
+#define GCC_QPIC_CLK 112
+#define GCC_QPIC_IO_MACRO_CLK 113
+#define GCC_QPIC_IO_MACRO_CLK_SRC 114
+#define GCC_QPIC_SLEEP_CLK 115
+#define GCC_SDCC1_AHB_CLK 116
+#define GCC_SDCC1_APPS_CLK 117
+#define GCC_SDCC1_APPS_CLK_SRC 118
+#define GCC_SLEEP_CLK_SRC 119
+#define GCC_SNOC_LPASS_CFG_CLK 120
+#define GCC_SNOC_NSSNOC_1_CLK 121
+#define GCC_SNOC_NSSNOC_CLK 122
+#define GCC_SNOC_PCIE3_1LANE_1_M_CLK 123
+#define GCC_SNOC_PCIE3_1LANE_1_S_CLK 124
+#define GCC_SNOC_PCIE3_1LANE_M_CLK 125
+#define GCC_SNOC_PCIE3_1LANE_S_CLK 126
+#define GCC_SNOC_PCIE3_2LANE_M_CLK 127
+#define GCC_SNOC_PCIE3_2LANE_S_CLK 128
+#define GCC_SNOC_USB_CLK 129
+#define GCC_SYS_NOC_AT_CLK 130
+#define GCC_SYS_NOC_WCSS_AHB_CLK 131
+#define GCC_SYSTEM_NOC_BFDCD_CLK_SRC 132
+#define GCC_UNIPHY0_AHB_CLK 133
+#define GCC_UNIPHY0_SYS_CLK 134
+#define GCC_UNIPHY1_AHB_CLK 135
+#define GCC_UNIPHY1_SYS_CLK 136
+#define GCC_UNIPHY_SYS_CLK_SRC 137
+#define GCC_USB0_AUX_CLK 138
+#define GCC_USB0_AUX_CLK_SRC 139
+#define GCC_USB0_EUD_AT_CLK 140
+#define GCC_USB0_LFPS_CLK 141
+#define GCC_USB0_LFPS_CLK_SRC 142
+#define GCC_USB0_MASTER_CLK 143
+#define GCC_USB0_MASTER_CLK_SRC 144
+#define GCC_USB0_MOCK_UTMI_CLK 145
+#define GCC_USB0_MOCK_UTMI_CLK_SRC 146
+#define GCC_USB0_MOCK_UTMI_DIV_CLK_SRC 147
+#define GCC_USB0_PHY_CFG_AHB_CLK 148
+#define GCC_USB0_PIPE_CLK 149
+#define GCC_USB0_SLEEP_CLK 150
+#define GCC_WCSS_AHB_CLK_SRC 151
+#define GCC_WCSS_AXIM_CLK 152
+#define GCC_WCSS_AXIS_CLK 153
+#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 154
+#define GCC_WCSS_DBG_IFC_APB_CLK 155
+#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 156
+#define GCC_WCSS_DBG_IFC_ATB_CLK 157
+#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 158
+#define GCC_WCSS_DBG_IFC_NTS_CLK 159
+#define GCC_WCSS_ECAHB_CLK 160
+#define GCC_WCSS_MST_ASYNC_BDG_CLK 161
+#define GCC_WCSS_SLV_ASYNC_BDG_CLK 162
+#define GCC_XO_CLK 163
+#define GCC_XO_CLK_SRC 164
+#define GCC_XO_DIV4_CLK 165
+#define GCC_IM_SLEEP_CLK 166
+#define GCC_NSSNOC_PCNOC_1_CLK 167
+#define GCC_MEM_NOC_AHB_CLK 168
+#define GCC_MEM_NOC_APSS_AXI_CLK 169
+#define GCC_SNOC_QOSGEN_EXTREF_DIV_CLK_SRC 170
+#define GCC_MEM_NOC_QOSGEN_EXTREF_CLK 171
+#define GCC_PCIE3X2_PIPE_CLK_SRC 172
+#define GCC_PCIE3X1_0_PIPE_CLK_SRC 173
+#define GCC_PCIE3X1_1_PIPE_CLK_SRC 174
+#define GCC_USB0_PIPE_CLK_SRC 175
+
+#define GCC_ADSS_BCR 0
+#define GCC_ADSS_PWM_CLK_ARES 1
+#define GCC_AHB_CLK_ARES 2
+#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 3
+#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_GPLL0_CLK_ARES 4
+#define GCC_APSS_AHB_CLK_ARES 5
+#define GCC_APSS_AXI_CLK_ARES 6
+#define GCC_BLSP1_AHB_CLK_ARES 7
+#define GCC_BLSP1_BCR 8
+#define GCC_BLSP1_QUP1_BCR 9
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK_ARES 10
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK_ARES 11
+#define GCC_BLSP1_QUP2_BCR 12
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK_ARES 13
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK_ARES 14
+#define GCC_BLSP1_QUP3_BCR 15
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK_ARES 16
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK_ARES 17
+#define GCC_BLSP1_SLEEP_CLK_ARES 18
+#define GCC_BLSP1_UART1_APPS_CLK_ARES 19
+#define GCC_BLSP1_UART1_BCR 20
+#define GCC_BLSP1_UART2_APPS_CLK_ARES 21
+#define GCC_BLSP1_UART2_BCR 22
+#define GCC_BLSP1_UART3_APPS_CLK_ARES 23
+#define GCC_BLSP1_UART3_BCR 24
+#define GCC_CE_BCR 25
+#define GCC_CMN_BLK_BCR 26
+#define GCC_CMN_LDO0_BCR 27
+#define GCC_CMN_LDO1_BCR 28
+#define GCC_DCC_BCR 29
+#define GCC_GP1_CLK_ARES 30
+#define GCC_GP2_CLK_ARES 31
+#define GCC_LPASS_BCR 32
+#define GCC_LPASS_CORE_AXIM_CLK_ARES 33
+#define GCC_LPASS_SWAY_CLK_ARES 34
+#define GCC_MDIOM_BCR 35
+#define GCC_MDIOS_BCR 36
+#define GCC_NSS_BCR 37
+#define GCC_NSS_TS_CLK_ARES 38
+#define GCC_NSSCC_CLK_ARES 39
+#define GCC_NSSCFG_CLK_ARES 40
+#define GCC_NSSNOC_ATB_CLK_ARES 41
+#define GCC_NSSNOC_NSSCC_CLK_ARES 42
+#define GCC_NSSNOC_QOSGEN_REF_CLK_ARES 43
+#define GCC_NSSNOC_SNOC_1_CLK_ARES 44
+#define GCC_NSSNOC_SNOC_CLK_ARES 45
+#define GCC_NSSNOC_TIMEOUT_REF_CLK_ARES 46
+#define GCC_NSSNOC_XO_DCD_CLK_ARES 47
+#define GCC_PCIE3X1_0_AHB_CLK_ARES 48
+#define GCC_PCIE3X1_0_AUX_CLK_ARES 49
+#define GCC_PCIE3X1_0_AXI_M_CLK_ARES 50
+#define GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK_ARES 51
+#define GCC_PCIE3X1_0_AXI_S_CLK_ARES 52
+#define GCC_PCIE3X1_0_BCR 53
+#define GCC_PCIE3X1_0_LINK_DOWN_BCR 54
+#define GCC_PCIE3X1_0_PHY_BCR 55
+#define GCC_PCIE3X1_0_PHY_PHY_BCR 56
+#define GCC_PCIE3X1_1_AHB_CLK_ARES 57
+#define GCC_PCIE3X1_1_AUX_CLK_ARES 58
+#define GCC_PCIE3X1_1_AXI_M_CLK_ARES 59
+#define GCC_PCIE3X1_1_AXI_S_BRIDGE_CLK_ARES 60
+#define GCC_PCIE3X1_1_AXI_S_CLK_ARES 61
+#define GCC_PCIE3X1_1_BCR 62
+#define GCC_PCIE3X1_1_LINK_DOWN_BCR 63
+#define GCC_PCIE3X1_1_PHY_BCR 64
+#define GCC_PCIE3X1_1_PHY_PHY_BCR 65
+#define GCC_PCIE3X1_PHY_AHB_CLK_ARES 66
+#define GCC_PCIE3X2_AHB_CLK_ARES 67
+#define GCC_PCIE3X2_AUX_CLK_ARES 68
+#define GCC_PCIE3X2_AXI_M_CLK_ARES 69
+#define GCC_PCIE3X2_AXI_S_BRIDGE_CLK_ARES 70
+#define GCC_PCIE3X2_AXI_S_CLK_ARES 71
+#define GCC_PCIE3X2_BCR 72
+#define GCC_PCIE3X2_LINK_DOWN_BCR 73
+#define GCC_PCIE3X2_PHY_AHB_CLK_ARES 74
+#define GCC_PCIE3X2_PHY_BCR 75
+#define GCC_PCIE3X2PHY_PHY_BCR 76
+#define GCC_PCNOC_BCR 77
+#define GCC_PCNOC_LPASS_CLK_ARES 78
+#define GCC_PRNG_AHB_CLK_ARES 79
+#define GCC_PRNG_BCR 80
+#define GCC_Q6_AHB_CLK_ARES 81
+#define GCC_Q6_AHB_S_CLK_ARES 82
+#define GCC_Q6_AXIM_CLK_ARES 83
+#define GCC_Q6_AXIS_CLK_ARES 84
+#define GCC_Q6_TSCTR_1TO2_CLK_ARES 85
+#define GCC_Q6SS_ATBM_CLK_ARES 86
+#define GCC_Q6SS_PCLKDBG_CLK_ARES 87
+#define GCC_Q6SS_TRIG_CLK_ARES 88
+#define GCC_QDSS_APB2JTAG_CLK_ARES 89
+#define GCC_QDSS_AT_CLK_ARES 90
+#define GCC_QDSS_BCR 91
+#define GCC_QDSS_CFG_AHB_CLK_ARES 92
+#define GCC_QDSS_DAP_AHB_CLK_ARES 93
+#define GCC_QDSS_DAP_CLK_ARES 94
+#define GCC_QDSS_ETR_USB_CLK_ARES 95
+#define GCC_QDSS_EUD_AT_CLK_ARES 96
+#define GCC_QDSS_STM_CLK_ARES 97
+#define GCC_QDSS_TRACECLKIN_CLK_ARES 98
+#define GCC_QDSS_TS_CLK_ARES 99
+#define GCC_QDSS_TSCTR_DIV16_CLK_ARES 100
+#define GCC_QDSS_TSCTR_DIV2_CLK_ARES 101
+#define GCC_QDSS_TSCTR_DIV3_CLK_ARES 102
+#define GCC_QDSS_TSCTR_DIV4_CLK_ARES 103
+#define GCC_QDSS_TSCTR_DIV8_CLK_ARES 104
+#define GCC_QPIC_AHB_CLK_ARES 105
+#define GCC_QPIC_CLK_ARES 106
+#define GCC_QPIC_BCR 107
+#define GCC_QPIC_IO_MACRO_CLK_ARES 108
+#define GCC_QPIC_SLEEP_CLK_ARES 109
+#define GCC_QUSB2_0_PHY_BCR 110
+#define GCC_SDCC1_AHB_CLK_ARES 111
+#define GCC_SDCC1_APPS_CLK_ARES 112
+#define GCC_SDCC_BCR 113
+#define GCC_SNOC_BCR 114
+#define GCC_SNOC_LPASS_CFG_CLK_ARES 115
+#define GCC_SNOC_NSSNOC_1_CLK_ARES 116
+#define GCC_SNOC_NSSNOC_CLK_ARES 117
+#define GCC_SYS_NOC_QDSS_STM_AXI_CLK_ARES 118
+#define GCC_SYS_NOC_WCSS_AHB_CLK_ARES 119
+#define GCC_UNIPHY0_AHB_CLK_ARES 120
+#define GCC_UNIPHY0_BCR 121
+#define GCC_UNIPHY0_SYS_CLK_ARES 122
+#define GCC_UNIPHY1_AHB_CLK_ARES 123
+#define GCC_UNIPHY1_BCR 124
+#define GCC_UNIPHY1_SYS_CLK_ARES 125
+#define GCC_USB0_AUX_CLK_ARES 126
+#define GCC_USB0_EUD_AT_CLK_ARES 127
+#define GCC_USB0_LFPS_CLK_ARES 128
+#define GCC_USB0_MASTER_CLK_ARES 129
+#define GCC_USB0_MOCK_UTMI_CLK_ARES 130
+#define GCC_USB0_PHY_BCR 131
+#define GCC_USB0_PHY_CFG_AHB_CLK_ARES 132
+#define GCC_USB0_SLEEP_CLK_ARES 133
+#define GCC_USB3PHY_0_PHY_BCR 134
+#define GCC_USB_BCR 135
+#define GCC_WCSS_AXIM_CLK_ARES 136
+#define GCC_WCSS_AXIS_CLK_ARES 137
+#define GCC_WCSS_BCR 138
+#define GCC_WCSS_DBG_IFC_APB_BDG_CLK_ARES 139
+#define GCC_WCSS_DBG_IFC_APB_CLK_ARES 140
+#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK_ARES 141
+#define GCC_WCSS_DBG_IFC_ATB_CLK_ARES 142
+#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK_ARES 143
+#define GCC_WCSS_DBG_IFC_NTS_CLK_ARES 144
+#define GCC_WCSS_ECAHB_CLK_ARES 145
+#define GCC_WCSS_MST_ASYNC_BDG_CLK_ARES 146
+#define GCC_WCSS_Q6_BCR 147
+#define GCC_WCSS_SLV_ASYNC_BDG_CLK_ARES 148
+#define GCC_XO_CLK_ARES 149
+#define GCC_XO_DIV4_CLK_ARES 150
+#define GCC_Q6SS_DBG_ARES 151
+#define GCC_WCSS_DBG_BDG_ARES 152
+#define GCC_WCSS_DBG_ARES 153
+#define GCC_WCSS_AXI_S_ARES 154
+#define GCC_WCSS_AXI_M_ARES 155
+#define GCC_WCSSAON_ARES 156
+#define GCC_PCIE3X2_PIPE_ARES 157
+#define GCC_PCIE3X2_CORE_STICKY_ARES 158
+#define GCC_PCIE3X2_AXI_S_STICKY_ARES 159
+#define GCC_PCIE3X2_AXI_M_STICKY_ARES 160
+#define GCC_PCIE3X1_0_PIPE_ARES 161
+#define GCC_PCIE3X1_0_CORE_STICKY_ARES 162
+#define GCC_PCIE3X1_0_AXI_S_STICKY_ARES 163
+#define GCC_PCIE3X1_0_AXI_M_STICKY_ARES 164
+#define GCC_PCIE3X1_1_PIPE_ARES 165
+#define GCC_PCIE3X1_1_CORE_STICKY_ARES 166
+#define GCC_PCIE3X1_1_AXI_S_STICKY_ARES 167
+#define GCC_PCIE3X1_1_AXI_M_STICKY_ARES 168
+#define GCC_IM_SLEEP_CLK_ARES 169
+#define GCC_NSSNOC_PCNOC_1_CLK_ARES 170
+#define GCC_UNIPHY0_XPCS_ARES 171
+#define GCC_UNIPHY1_XPCS_ARES 172
+#endif
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
2023-01-25 10:45 ` Kathiravan Thirumoorthy
` (4 preceding siblings ...)
(?)
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 11:14 ` Krzysztof Kozlowski
2023-01-25 20:54 ` Stephen Boyd
-1 siblings, 2 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add support for the global clock controller found on IPQ5332 SoC.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq5332.c | 3954 ++++++++++++++++++++++++++++++++
3 files changed, 3962 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 70d43f0a8919..1d300c89ecfc 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -141,6 +141,13 @@ config IPQ_GCC_4019
Say Y if you want to use peripheral devices such as UART, SPI,
i2c, USB, SD/eMMC, etc.
+config IPQ_GCC_5332
+ tristate "IPQ5332 Global Clock Controller"
+ help
+ Support for the global clock controller on ipq5332 devices.
+ Say Y if you want to use peripheral devices such as UART, SPI,
+ i2c, USB, SD/eMMC, etc.
+
config IPQ_GCC_6018
tristate "IPQ6018 Global Clock Controller"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index f18c446a97ea..093897aa9f22 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
+obj-$(CONFIG_IPQ_GCC_5332) += gcc-ipq5332.o
obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
new file mode 100644
index 000000000000..8351096a4d32
--- /dev/null
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -0,0 +1,3954 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "reset.h"
+
+enum {
+ DT_SLEEP_CLK,
+ DT_XO,
+ DT_PCIE_2LANE_PHY_PIPE_CLK,
+ DT_PCIE_2LANE_PHY_PIPE_X1_CLK,
+ DT_USB_PCIE_WRAPPER_PIPE_CLK,
+};
+
+enum {
+ P_PCIE3X2_PIPE,
+ P_PCIE3X1_0_PIPE,
+ P_PCIE3X1_1_PIPE,
+ P_USB3PHY_0_PIPE,
+ P_CORE_BI_PLL_TEST_SE,
+ P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC,
+ P_GPLL0_OUT_AUX,
+ P_GPLL0_OUT_MAIN,
+ P_GPLL2_OUT_AUX,
+ P_GPLL2_OUT_MAIN,
+ P_GPLL4_OUT_AUX,
+ P_GPLL4_OUT_MAIN,
+ P_SLEEP_CLK,
+ P_XO,
+};
+
+static const struct clk_parent_data gcc_parent_data_xo = { .index = DT_XO };
+
+static struct clk_alpha_pll gpll0_main = {
+ .offset = 0x20000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+ .clkr = {
+ .enable_reg = 0xb000,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gpll0_main",
+ .parent_data = &gcc_parent_data_xo,
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_stromer_ops,
+ },
+ },
+};
+
+static struct clk_fixed_factor gpll0_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll0_div2",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll0 = {
+ .offset = 0x20000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll0",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll2_main = {
+ .offset = 0x21000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+ .clkr = {
+ .enable_reg = 0xb000,
+ .enable_mask = BIT(1),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gpll2",
+ .parent_data = &gcc_parent_data_xo,
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_stromer_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll2 = {
+ .offset = 0x21000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll2_main",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll2_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll4_main = {
+ .offset = 0x22000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+ .clkr = {
+ .enable_reg = 0xb000,
+ .enable_mask = BIT(2),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gpll4_main",
+ .parent_data = &gcc_parent_data_xo,
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_stromer_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll4 = {
+ .offset = 0x22000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll4",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll4_main.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct parent_map gcc_parent_map_0[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 4 },
+};
+
+static const struct clk_parent_data gcc_parent_data_0[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+};
+
+static const struct parent_map gcc_parent_map_1[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data gcc_parent_data_1[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_2[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL4_OUT_MAIN, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_2[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll4.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_3[] = {
+ { P_XO, 0 },
+};
+
+static const struct clk_parent_data gcc_parent_data_3[] = {
+ { .index = DT_XO },
+};
+
+static const struct parent_map gcc_parent_map_4[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 4 },
+ { P_SLEEP_CLK, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_4[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+ { .index = DT_SLEEP_CLK },
+};
+
+static const struct parent_map gcc_parent_map_5[] = {
+ { P_XO, 0 },
+ { P_GPLL4_OUT_MAIN, 1 },
+ { P_GPLL0_OUT_AUX, 2 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 4 },
+};
+
+static const struct clk_parent_data gcc_parent_data_5[] = {
+ { .index = DT_XO },
+ { .hw = &gpll4.clkr.hw },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+};
+
+static const struct parent_map gcc_parent_map_6[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL2_OUT_AUX, 2 },
+ { P_GPLL4_OUT_AUX, 3 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 4 },
+ { P_GPLL0_OUT_AUX, 5 },
+};
+
+static const struct clk_parent_data gcc_parent_data_6[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll2.clkr.hw },
+ { .hw = &gpll4.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+ { .hw = &gpll0.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_7[] = {
+ { P_XO, 0 },
+};
+
+static const struct clk_parent_data gcc_parent_data_7[] = {
+ { .index = DT_XO },
+};
+
+static const struct parent_map gcc_parent_map_8[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL0_OUT_AUX, 2 },
+ { P_SLEEP_CLK, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_8[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll0.clkr.hw },
+ { .index = DT_SLEEP_CLK },
+};
+
+static const struct parent_map gcc_parent_map_9[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL2_OUT_AUX, 2 },
+ { P_GPLL4_OUT_AUX, 3 },
+ { P_SLEEP_CLK, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_9[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll2.clkr.hw },
+ { .hw = &gpll4.clkr.hw },
+ { .index = DT_SLEEP_CLK },
+};
+
+static const struct parent_map gcc_parent_map_10[] = {
+ { P_XO, 0 },
+ { P_GPLL4_OUT_MAIN, 1 },
+ { P_GPLL0_OUT_AUX, 2 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 4 },
+};
+
+static const struct clk_parent_data gcc_parent_data_10[] = {
+ { .index = DT_XO },
+ { .hw = &gpll4.clkr.hw },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+};
+
+static const struct parent_map gcc_parent_map_11[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL2_OUT_AUX, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_11[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll2.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_12[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL2_OUT_MAIN, 2 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 4 },
+};
+
+static const struct clk_parent_data gcc_parent_data_12[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll2.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+};
+
+static const struct parent_map gcc_parent_map_13[] = {
+ { P_SLEEP_CLK, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_13[] = {
+ { .index = DT_SLEEP_CLK },
+};
+
+static const struct parent_map gcc_parent_map_14[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL4_OUT_MAIN, 2 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 3 },
+};
+
+static const struct clk_parent_data gcc_parent_data_14[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll4.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+};
+
+static const struct parent_map gcc_parent_map_15[] = {
+ { P_XO, 0 },
+ { P_GPLL0_OUT_AUX, 2 },
+ { P_SLEEP_CLK, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_15[] = {
+ { .index = DT_XO },
+ { .hw = &gpll0.clkr.hw },
+ { .index = DT_SLEEP_CLK },
+};
+
+static const struct parent_map gcc_parent_map_16[] = {
+ { P_XO, 0 },
+ { P_GPLL4_OUT_AUX, 1 },
+ { P_GPLL0_OUT_MAIN, 3 },
+ { P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 4 },
+};
+
+static const struct clk_parent_data gcc_parent_data_16[] = {
+ { .index = DT_XO },
+ { .hw = &gpll4.clkr.hw },
+ { .hw = &gpll0.clkr.hw },
+ { .hw = &gpll0_div2.hw },
+};
+
+static const struct parent_map gcc_parent_map_17[] = {
+ { P_PCIE3X2_PIPE, 0 },
+ { P_XO, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_17[] = {
+ { .index = DT_PCIE_2LANE_PHY_PIPE_CLK },
+ { .index = DT_XO },
+};
+
+static const struct parent_map gcc_parent_map_18[] = {
+ { P_PCIE3X1_0_PIPE, 0 },
+ { P_XO, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_18[] = {
+ { .index = DT_USB_PCIE_WRAPPER_PIPE_CLK },
+ { .index = DT_XO },
+};
+
+static const struct parent_map gcc_parent_map_19[] = {
+ { P_PCIE3X1_1_PIPE, 0 },
+ { P_XO, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_19[] = {
+ { .index = DT_PCIE_2LANE_PHY_PIPE_X1_CLK },
+ { .index = DT_XO },
+};
+
+static const struct parent_map gcc_parent_map_20[] = {
+ { P_USB3PHY_0_PIPE, 0 },
+ { P_XO, 2 },
+};
+
+static const struct clk_parent_data gcc_parent_data_20[] = {
+ { .index = DT_USB_PCIE_WRAPPER_PIPE_CLK },
+ { .index = DT_XO },
+};
+
+static const struct freq_tbl ftbl_gcc_adss_pwm_clk_src[] = {
+ F(24000000, P_XO, 1, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_adss_pwm_clk_src = {
+ .cmd_rcgr = 0x1c004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_1,
+ .freq_tbl = ftbl_gcc_adss_pwm_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_adss_pwm_clk_src",
+ .parent_data = gcc_parent_data_1,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_1),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_apss_ahb_clk_src[] = {
+ F(24000000, P_XO, 1, 0, 0),
+ F(50000000, P_GPLL0_OUT_MAIN, 16, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_apss_ahb_clk_src = {
+ .cmd_rcgr = 0x2400c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_apss_ahb_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_apss_ahb_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_apss_axi_clk_src[] = {
+ F(480000000, P_GPLL4_OUT_MAIN, 2.5, 0, 0),
+ F(533333333, P_GPLL0_OUT_MAIN, 1.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_apss_axi_clk_src = {
+ .cmd_rcgr = 0x24004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_6,
+ .freq_tbl = ftbl_gcc_apss_axi_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_apss_axi_clk_src",
+ .parent_data = gcc_parent_data_6,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_6),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_blsp1_qup1_spi_apps_clk_src[] = {
+ F(960000, P_XO, 1, 1, 25),
+ F(4800000, P_XO, 5, 0, 0),
+ F(9600000, P_XO, 2.5, 0, 0),
+ F(16000000, P_GPLL0_OUT_MAIN, 10, 1, 5),
+ F(24000000, P_XO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_MAIN, 16, 1, 2),
+ F(50000000, P_GPLL0_OUT_MAIN, 16, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_blsp1_qup1_spi_apps_clk_src = {
+ .cmd_rcgr = 0x2004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_blsp1_qup1_spi_apps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup1_spi_apps_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_blsp1_qup2_spi_apps_clk_src = {
+ .cmd_rcgr = 0x3004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_blsp1_qup1_spi_apps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup2_spi_apps_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_blsp1_qup3_spi_apps_clk_src = {
+ .cmd_rcgr = 0x4004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_blsp1_qup1_spi_apps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup3_spi_apps_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_blsp1_uart1_apps_clk_src[] = {
+ F(3686400, P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 1, 144, 15625),
+ F(7372800, P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 1, 288, 15625),
+ F(14745600, P_GCC_GPLL0_OUT_MAIN_DIV_CLK_SRC, 1, 576, 15625),
+ F(24000000, P_XO, 1, 0, 0),
+ F(25000000, P_GPLL0_OUT_MAIN, 16, 1, 2),
+ F(32000000, P_GPLL0_OUT_MAIN, 1, 1, 25),
+ F(40000000, P_GPLL0_OUT_MAIN, 1, 1, 20),
+ F(46400000, P_GPLL0_OUT_MAIN, 1, 29, 500),
+ F(48000000, P_GPLL0_OUT_MAIN, 1, 3, 50),
+ F(51200000, P_GPLL0_OUT_MAIN, 1, 8, 125),
+ F(56000000, P_GPLL0_OUT_MAIN, 1, 7, 100),
+ F(58982400, P_GPLL0_OUT_MAIN, 1, 1152, 15625),
+ F(60000000, P_GPLL0_OUT_MAIN, 1, 3, 40),
+ F(64000000, P_GPLL0_OUT_MAIN, 12.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_blsp1_uart1_apps_clk_src = {
+ .cmd_rcgr = 0x202c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_blsp1_uart1_apps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_uart1_apps_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_blsp1_uart2_apps_clk_src = {
+ .cmd_rcgr = 0x302c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_blsp1_uart1_apps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_uart2_apps_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_blsp1_uart3_apps_clk_src = {
+ .cmd_rcgr = 0x402c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_blsp1_uart1_apps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_uart3_apps_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = {
+ F(24000000, P_XO, 1, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_gp1_clk_src = {
+ .cmd_rcgr = 0x8004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_4,
+ .freq_tbl = ftbl_gcc_gp1_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_gp1_clk_src",
+ .parent_data = gcc_parent_data_4,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_4),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_gp2_clk_src = {
+ .cmd_rcgr = 0x9004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_4,
+ .freq_tbl = ftbl_gcc_gp1_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_gp2_clk_src",
+ .parent_data = gcc_parent_data_4,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_4),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_lpass_sway_clk_src[] = {
+ F(133333333, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_lpass_sway_clk_src = {
+ .cmd_rcgr = 0x27004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_1,
+ .freq_tbl = ftbl_gcc_lpass_sway_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_lpass_sway_clk_src",
+ .parent_data = gcc_parent_data_1,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_1),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_nss_ts_clk_src[] = {
+ F(24000000, P_XO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_nss_ts_clk_src = {
+ .cmd_rcgr = 0x17088,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_7,
+ .freq_tbl = ftbl_gcc_nss_ts_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_nss_ts_clk_src",
+ .parent_data = gcc_parent_data_7,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_7),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_pcie3x1_0_axi_clk_src[] = {
+ F(240000000, P_GPLL4_OUT_MAIN, 5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_pcie3x1_0_axi_clk_src = {
+ .cmd_rcgr = 0x29018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_pcie3x1_0_axi_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_axi_clk_src",
+ .parent_data = gcc_parent_data_2,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_2),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_pcie3x1_0_rchg_clk_src = {
+ .cmd_rcgr = 0x2907c,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_adss_pwm_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_rchg_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_0_rchg_clk = {
+ .halt_reg = 0x2907c,
+ .clkr = {
+ .enable_reg = 0x2907c,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie3x1_0_rchg_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie3x1_0_rchg_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_rcg2 gcc_pcie3x1_1_axi_clk_src = {
+ .cmd_rcgr = 0x2a004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_pcie3x1_0_axi_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_axi_clk_src",
+ .parent_data = gcc_parent_data_2,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_2),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_pcie3x1_1_rchg_clk_src = {
+ .cmd_rcgr = 0x2a078,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_adss_pwm_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_rchg_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_1_rchg_clk = {
+ .halt_reg = 0x2a078,
+ .clkr = {
+ .enable_reg = 0x2a078,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie3x1_1_rchg_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie3x1_1_rchg_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_pcie3x2_axi_m_clk_src[] = {
+ F(266666667, P_GPLL4_OUT_MAIN, 4.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_pcie3x2_axi_m_clk_src = {
+ .cmd_rcgr = 0x28018,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_pcie3x2_axi_m_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_axi_m_clk_src",
+ .parent_data = gcc_parent_data_2,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_2),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_pcie3x2_axi_s_clk_src = {
+ .cmd_rcgr = 0x28084,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_2,
+ .freq_tbl = ftbl_gcc_pcie3x1_0_axi_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_axi_s_clk_src",
+ .parent_data = gcc_parent_data_2,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_2),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_pcie3x2_rchg_clk_src = {
+ .cmd_rcgr = 0x28078,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_adss_pwm_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_rchg_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_rchg_clk = {
+ .halt_reg = 0x28078,
+ .clkr = {
+ .enable_reg = 0x28078,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_pcie3x2_rchg_clk",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_pcie3x2_rchg_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_aux_clk_src[] = {
+ F(2000000, P_XO, 12, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_pcie_aux_clk_src = {
+ .cmd_rcgr = 0x28004,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_8,
+ .freq_tbl = ftbl_gcc_pcie_aux_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie_aux_clk_src",
+ .parent_data = gcc_parent_data_8,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_8),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_regmap_mux pcie3x2_pipe_clk_src = {
+ .reg = 0x28064,
+ .shift = 8,
+ .width = 2,
+ .parent_map = gcc_parent_map_17,
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "pcie3x2_phy_pipe_clk_src",
+ .parent_data = gcc_parent_data_17,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_17),
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_regmap_mux pcie3x1_0_pipe_clk_src = {
+ .reg = 0x29064,
+ .shift = 8,
+ .width = 2,
+ .parent_map = gcc_parent_map_18,
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "pcie3x1_0_phy_pipe_clk_src",
+ .parent_data = gcc_parent_data_18,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_18),
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_regmap_mux pcie3x1_1_pipe_clk_src = {
+ .reg = 0x2A064,
+ .shift = 8,
+ .width = 2,
+ .parent_map = gcc_parent_map_19,
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "pcie3x1_1_phy_pipe_clk_src",
+ .parent_data = gcc_parent_data_19,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_19),
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_pcnoc_bfdcd_clk_src[] = {
+ F(24000000, P_XO, 1, 0, 0),
+ F(50000000, P_GPLL0_OUT_MAIN, 16, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_pcnoc_bfdcd_clk_src = {
+ .cmd_rcgr = 0x31004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_pcnoc_bfdcd_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcnoc_bfdcd_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_rcg2 gcc_q6_axim_clk_src = {
+ .cmd_rcgr = 0x25004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_9,
+ .freq_tbl = ftbl_gcc_apss_axi_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6_axim_clk_src",
+ .parent_data = gcc_parent_data_9,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_9),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_qdss_at_clk_src[] = {
+ F(240000000, P_GPLL4_OUT_MAIN, 5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_qdss_at_clk_src = {
+ .cmd_rcgr = 0x2d004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_5,
+ .freq_tbl = ftbl_gcc_qdss_at_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_at_clk_src",
+ .parent_data = gcc_parent_data_5,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_5),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_qdss_tsctr_clk_src[] = {
+ F(600000000, P_GPLL4_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_qdss_tsctr_clk_src = {
+ .cmd_rcgr = 0x2d01c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_5,
+ .freq_tbl = ftbl_gcc_qdss_tsctr_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_tsctr_clk_src",
+ .parent_data = gcc_parent_data_5,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_5),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_fixed_factor gcc_qdss_tsctr_div2_clk_src = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qdss_tsctr_div2_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qdss_tsctr_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static struct clk_fixed_factor gcc_qdss_tsctr_div3_clk_src = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qdss_tsctr_div3_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qdss_tsctr_clk_src.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static struct clk_fixed_factor gcc_qdss_tsctr_div4_clk_src = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qdss_tsctr_div4_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qdss_tsctr_clk_src.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static struct clk_fixed_factor gcc_qdss_tsctr_div8_clk_src = {
+ .mult = 1,
+ .div = 8,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qdss_tsctr_div8_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qdss_tsctr_clk_src.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static struct clk_fixed_factor gcc_qdss_tsctr_div16_clk_src = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qdss_tsctr_div16_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qdss_tsctr_clk_src.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_qpic_io_macro_clk_src[] = {
+ F(24000000, P_XO, 1, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ F(320000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_qpic_io_macro_clk_src = {
+ .cmd_rcgr = 0x32004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_11,
+ .freq_tbl = ftbl_gcc_qpic_io_macro_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_qpic_io_macro_clk_src",
+ .parent_data = gcc_parent_data_11,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_11),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc1_apps_clk_src[] = {
+ F(143713, P_XO, 1, 1, 167),
+ F(400000, P_XO, 1, 1, 60),
+ F(24000000, P_XO, 1, 0, 0),
+ F(48000000, P_GPLL2_OUT_MAIN, 12, 1, 2),
+ F(96000000, P_GPLL2_OUT_MAIN, 12, 0, 0),
+ F(177777778, P_GPLL0_OUT_MAIN, 4.5, 0, 0),
+ F(192000000, P_GPLL2_OUT_MAIN, 6, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_sdcc1_apps_clk_src = {
+ .cmd_rcgr = 0x33004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_12,
+ .freq_tbl = ftbl_gcc_sdcc1_apps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_sdcc1_apps_clk_src",
+ .parent_data = gcc_parent_data_12,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_12),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_sleep_clk_src[] = {
+ F(32000, P_SLEEP_CLK, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_sleep_clk_src = {
+ .cmd_rcgr = 0x3400c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_13,
+ .freq_tbl = ftbl_gcc_sleep_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_sleep_clk_src",
+ .parent_data = gcc_parent_data_13,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_13),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_system_noc_bfdcd_clk_src[] = {
+ F(24000000, P_XO, 1, 0, 0),
+ F(133333333, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ F(200000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ F(266666667, P_GPLL4_OUT_MAIN, 4.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_system_noc_bfdcd_clk_src = {
+ .cmd_rcgr = 0x2e004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_14,
+ .freq_tbl = ftbl_gcc_system_noc_bfdcd_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_system_noc_bfdcd_clk_src",
+ .parent_data = gcc_parent_data_14,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_14),
+ .ops = &clk_rcg2_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor gcc_system_noc_bfdcd_div2_clk_src = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_system_noc_bfdcd_div2_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_rcg2 gcc_uniphy_sys_clk_src = {
+ .cmd_rcgr = 0x16004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_3,
+ .freq_tbl = ftbl_gcc_nss_ts_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_uniphy_sys_clk_src",
+ .parent_data = gcc_parent_data_3,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_3),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_usb0_aux_clk_src = {
+ .cmd_rcgr = 0x2c018,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_15,
+ .freq_tbl = ftbl_gcc_pcie_aux_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_aux_clk_src",
+ .parent_data = gcc_parent_data_15,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_15),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_usb0_lfps_clk_src[] = {
+ F(25000000, P_GPLL0_OUT_MAIN, 16, 1, 2),
+ { }
+};
+
+static struct clk_rcg2 gcc_usb0_lfps_clk_src = {
+ .cmd_rcgr = 0x2c07c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_1,
+ .freq_tbl = ftbl_gcc_usb0_lfps_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_lfps_clk_src",
+ .parent_data = gcc_parent_data_1,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_1),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_usb0_master_clk_src = {
+ .cmd_rcgr = 0x2c004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_gp1_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_master_clk_src",
+ .parent_data = gcc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_0),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gcc_usb0_mock_utmi_clk_src[] = {
+ F(60000000, P_GPLL4_OUT_AUX, 10, 1, 2),
+ { }
+};
+
+static struct clk_rcg2 gcc_usb0_mock_utmi_clk_src = {
+ .cmd_rcgr = 0x2c02c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_16,
+ .freq_tbl = ftbl_gcc_usb0_mock_utmi_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_mock_utmi_clk_src",
+ .parent_data = gcc_parent_data_16,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_16),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_regmap_mux usb0_pipe_clk_src = {
+ .reg = 0x2C074,
+ .shift = 8,
+ .width = 2,
+ .parent_map = gcc_parent_map_20,
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "usb0phy_0_cc_pipe_clk_src",
+ .parent_data = gcc_parent_data_20,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_20),
+ .ops = &clk_regmap_mux_closest_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_rcg2 gcc_wcss_ahb_clk_src = {
+ .cmd_rcgr = 0x25030,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_1,
+ .freq_tbl = ftbl_gcc_lpass_sway_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_ahb_clk_src",
+ .parent_data = gcc_parent_data_1,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_1),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gcc_xo_clk_src = {
+ .cmd_rcgr = 0x34004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_3,
+ .freq_tbl = ftbl_gcc_nss_ts_clk_src,
+ .clkr.hw.init = &(const struct clk_init_data){
+ .name = "gcc_xo_clk_src",
+ .parent_data = gcc_parent_data_3,
+ .num_parents = ARRAY_SIZE(gcc_parent_data_3),
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_fixed_factor gcc_xo_div4_clk_src = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_xo_div4_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_xo_clk_src.clkr.hw },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap_div gcc_qdss_dap_div_clk_src = {
+ .reg = 0x2d028,
+ .shift = 0,
+ .width = 4,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "gcc_qdss_dap_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_tsctr_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div gcc_usb0_mock_utmi_div_clk_src = {
+ .reg = 0x2c040,
+ .shift = 0,
+ .width = 2,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "gcc_usb0_mock_utmi_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_usb0_mock_utmi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_branch gcc_adss_pwm_clk = {
+ .halt_reg = 0x1c00c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1c00c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_adss_pwm_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_adss_pwm_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ahb_clk = {
+ .halt_reg = 0x34024,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x34024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_apss_ahb_clk = {
+ .halt_reg = 0x24018,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_apss_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_apss_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_apss_axi_clk = {
+ .halt_reg = 0x2401c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(1),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_apss_axi_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_apss_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_ahb_clk = {
+ .halt_reg = 0x1008,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(4),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = {
+ .halt_reg = 0x2024,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup1_i2c_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_qup1_spi_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = {
+ .halt_reg = 0x2020,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2020,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup1_spi_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_qup1_spi_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = {
+ .halt_reg = 0x3024,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup2_i2c_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_qup2_spi_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = {
+ .halt_reg = 0x3020,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3020,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup2_spi_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_qup2_spi_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup3_i2c_apps_clk = {
+ .halt_reg = 0x4024,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup3_i2c_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_qup3_spi_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup3_spi_apps_clk = {
+ .halt_reg = 0x4020,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4020,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_qup3_spi_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_qup3_spi_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_sleep_clk = {
+ .halt_reg = 0x1010,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(5),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_sleep_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_sleep_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart1_apps_clk = {
+ .halt_reg = 0x2040,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2040,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_uart1_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_uart1_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart2_apps_clk = {
+ .halt_reg = 0x3040,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3040,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_uart2_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_uart2_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart3_apps_clk = {
+ .halt_reg = 0x4054,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4054,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_blsp1_uart3_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_blsp1_uart3_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ce_ahb_clk = {
+ .halt_reg = 0x25074,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25074,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_ce_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_div2_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ce_axi_clk = {
+ .halt_reg = 0x25068,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25068,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_ce_axi_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ce_pcnoc_ahb_clk = {
+ .halt_reg = 0x25070,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25070,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_ce_pcnoc_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cmn_12gpll_ahb_clk = {
+ .halt_reg = 0x3a004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3a004,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_cmn_12gpll_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cmn_12gpll_apu_clk = {
+ .halt_reg = 0x3a00c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3a00c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_cmn_12gpll_apu_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_cmn_12gpll_sys_clk = {
+ .halt_reg = 0x3a008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3a008,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_cmn_12gpll_sys_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_uniphy_sys_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp1_clk = {
+ .halt_reg = 0x8018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x8018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_gp1_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_gp1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp2_clk = {
+ .halt_reg = 0x9018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x9018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_gp2_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_gp2_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_lpass_core_axim_clk = {
+ .halt_reg = 0x27018,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x27018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_lpass_core_axim_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_lpass_sway_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_lpass_sway_clk = {
+ .halt_reg = 0x27014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x27014,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_lpass_sway_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_lpass_sway_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mdio_ahb_clk = {
+ .halt_reg = 0x12004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x12004,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_mdio_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mdio_slave_ahb_clk = {
+ .halt_reg = 0x1200c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1200c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_mdio_slave_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mem_noc_q6_axi_clk = {
+ .halt_reg = 0x19010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x19010,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_mem_noc_q6_axi_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_q6_axim_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mem_noc_ts_clk = {
+ .halt_reg = 0x19028,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x19028,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_mem_noc_ts_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_tsctr_div8_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nss_ts_clk = {
+ .halt_reg = 0x17018,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x17018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nss_ts_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_nss_ts_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nsscc_clk = {
+ .halt_reg = 0x17034,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17034,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nsscc_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nsscfg_clk = {
+ .halt_reg = 0x1702c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1702c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nsscfg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_atb_clk = {
+ .halt_reg = 0x17014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17014,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_atb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_at_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_nsscc_clk = {
+ .halt_reg = 0x17030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17030,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_nsscc_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_qosgen_ref_clk = {
+ .halt_reg = 0x1701c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1701c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_qosgen_ref_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_xo_div4_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_snoc_1_clk = {
+ .halt_reg = 0x1707c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1707c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_snoc_1_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_snoc_clk = {
+ .halt_reg = 0x17028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17028,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_snoc_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_timeout_ref_clk = {
+ .halt_reg = 0x17020,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17020,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_timeout_ref_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_xo_div4_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_xo_dcd_clk = {
+ .halt_reg = 0x17074,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17074,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_xo_dcd_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_0_ahb_clk = {
+ .halt_reg = 0x29030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x29030,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_0_aux_clk = {
+ .halt_reg = 0x29070,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x29070,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_aux_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie_aux_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_0_axi_m_clk = {
+ .halt_reg = 0x29038,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x29038,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_axi_m_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_0_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_0_axi_s_bridge_clk = {
+ .halt_reg = 0x29048,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x29048,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_axi_s_bridge_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_0_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_0_axi_s_clk = {
+ .halt_reg = 0x29040,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x29040,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_axi_s_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_0_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_0_pipe_clk = {
+ .halt_reg = 0x29068,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x29068,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_0_pipe_clk",
+ .parent_names = (const char *[]){
+ "pcie3x1_0_pipe_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_1_ahb_clk = {
+ .halt_reg = 0x2a00c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2a00c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_1_aux_clk = {
+ .halt_reg = 0x2a070,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2a070,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_aux_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie_aux_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_1_axi_m_clk = {
+ .halt_reg = 0x2a014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2a014,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_axi_m_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_1_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_1_axi_s_bridge_clk = {
+ .halt_reg = 0x2a024,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2a024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_axi_s_bridge_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_1_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_1_axi_s_clk = {
+ .halt_reg = 0x2a01c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2a01c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_axi_s_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_1_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_1_pipe_clk = {
+ .halt_reg = 0x2a068,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2a068,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_1_pipe_clk",
+ .parent_names = (const char *[]){
+ "pcie3x1_1_pipe_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x1_phy_ahb_clk = {
+ .halt_reg = 0x29078,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x29078,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x1_phy_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_ahb_clk = {
+ .halt_reg = 0x28030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x28030,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_aux_clk = {
+ .halt_reg = 0x28070,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x28070,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_aux_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie_aux_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_axi_m_clk = {
+ .halt_reg = 0x28038,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x28038,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_axi_m_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x2_axi_m_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_axi_s_bridge_clk = {
+ .halt_reg = 0x28048,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x28048,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_axi_s_bridge_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x2_axi_s_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_axi_s_clk = {
+ .halt_reg = 0x28040,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x28040,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_axi_s_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x2_axi_s_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_phy_ahb_clk = {
+ .halt_reg = 0x28080,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x28080,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_phy_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie3x2_pipe_clk = {
+ .halt_reg = 0x28068,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x28068,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcie3x2_pipe_clk",
+ .parent_names = (const char *[]){
+ "pcie3x2_pipe_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcnoc_at_clk = {
+ .halt_reg = 0x31024,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x31024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcnoc_at_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_at_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcnoc_lpass_clk = {
+ .halt_reg = 0x31020,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x31020,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_pcnoc_lpass_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_lpass_sway_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_prng_ahb_clk = {
+ .halt_reg = 0x13024,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(10),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_prng_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6_ahb_clk = {
+ .halt_reg = 0x25014,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x25014,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_wcss_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6_ahb_s_clk = {
+ .halt_reg = 0x25018,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x25018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6_ahb_s_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_wcss_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6_axim_clk = {
+ .halt_reg = 0x2500c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2500c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6_axim_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_q6_axim_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6_axis_clk = {
+ .halt_reg = 0x25010,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x25010,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6_axis_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6_tsctr_1to2_clk = {
+ .halt_reg = 0x25020,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x25020,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6_tsctr_1to2_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_tsctr_div2_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6ss_atbm_clk = {
+ .halt_reg = 0x2501c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2501c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6ss_atbm_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_at_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6ss_pclkdbg_clk = {
+ .halt_reg = 0x25024,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x25024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6ss_pclkdbg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_dap_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_q6ss_trig_clk = {
+ .halt_reg = 0x250a0,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x250a0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_q6ss_trig_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_dap_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qdss_at_clk = {
+ .halt_reg = 0x2d038,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2d038,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_at_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_at_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qdss_cfg_ahb_clk = {
+ .halt_reg = 0x2d06c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2d06c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_cfg_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qdss_dap_ahb_clk = {
+ .halt_reg = 0x2d068,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2d068,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_dap_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qdss_dap_clk = {
+ .halt_reg = 0x2d05c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(2),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_dap_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_dap_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qdss_etr_usb_clk = {
+ .halt_reg = 0x2d064,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2d064,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_etr_usb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_fixed_factor gcc_eud_at_div_clk_src = {
+ .mult = 1,
+ .div = 6,
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_eud_at_div_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_qdss_at_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static struct clk_branch gcc_qdss_eud_at_clk = {
+ .halt_reg = 0x2d070,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2d070,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qdss_eud_at_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_eud_at_div_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qpic_ahb_clk = {
+ .halt_reg = 0x32010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x32010,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qpic_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qpic_clk = {
+ .halt_reg = 0x32014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x32014,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qpic_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qpic_io_macro_clk = {
+ .halt_reg = 0x3200c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3200c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qpic_io_macro_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qpic_io_macro_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qpic_sleep_clk = {
+ .halt_reg = 0x3201c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3201c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_qpic_sleep_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_sleep_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc1_ahb_clk = {
+ .halt_reg = 0x33034,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x33034,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_sdcc1_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc1_apps_clk = {
+ .halt_reg = 0x3302c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3302c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_sdcc1_apps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_sdcc1_apps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_lpass_cfg_clk = {
+ .halt_reg = 0x2e028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e028,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_lpass_cfg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_lpass_sway_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_nssnoc_1_clk = {
+ .halt_reg = 0x17090,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17090,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_nssnoc_1_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_nssnoc_clk = {
+ .halt_reg = 0x17084,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17084,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_nssnoc_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_pcie3_1lane_1_m_clk = {
+ .halt_reg = 0x2e050,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e050,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_pcie3_1lane_1_m_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_1_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_pcie3_1lane_1_s_clk = {
+ .halt_reg = 0x2e0ac,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e0ac,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_pcie3_1lane_1_s_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_1_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_pcie3_1lane_m_clk = {
+ .halt_reg = 0x2e080,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e080,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_pcie3_1lane_m_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_0_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_pcie3_1lane_s_clk = {
+ .halt_reg = 0x2e04c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e04c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_pcie3_1lane_s_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x1_0_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_pcie3_2lane_m_clk = {
+ .halt_reg = 0x2e07c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e07c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_pcie3_2lane_m_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x2_axi_m_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_pcie3_2lane_s_clk = {
+ .halt_reg = 0x2e048,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e048,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_pcie3_2lane_s_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcie3x2_axi_s_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_snoc_usb_clk = {
+ .halt_reg = 0x2e058,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2e058,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_snoc_usb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_usb0_master_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sys_noc_at_clk = {
+ .halt_reg = 0x2e038,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2e038,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_sys_noc_at_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_at_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sys_noc_wcss_ahb_clk = {
+ .halt_reg = 0x2e030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e030,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_sys_noc_wcss_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_wcss_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_uniphy0_ahb_clk = {
+ .halt_reg = 0x16010,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x16010,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_uniphy0_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_uniphy0_sys_clk = {
+ .halt_reg = 0x1600c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1600c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_uniphy0_sys_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_uniphy_sys_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_uniphy1_ahb_clk = {
+ .halt_reg = 0x1601c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1601c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_uniphy1_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_uniphy1_sys_clk = {
+ .halt_reg = 0x16018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x16018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_uniphy1_sys_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_uniphy_sys_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_aux_clk = {
+ .halt_reg = 0x2c050,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2c050,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_aux_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_usb0_aux_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_eud_at_clk = {
+ .halt_reg = 0x30004,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x30004,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_eud_at_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_eud_at_div_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_lfps_clk = {
+ .halt_reg = 0x2c090,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2c090,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_lfps_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_usb0_lfps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_master_clk = {
+ .halt_reg = 0x2c048,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2c048,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_master_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_usb0_master_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_mock_utmi_clk = {
+ .halt_reg = 0x2c054,
+ .clkr = {
+ .enable_reg = 0x2c054,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_mock_utmi_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_usb0_mock_utmi_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_phy_cfg_ahb_clk = {
+ .halt_reg = 0x2c05c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2c05c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_phy_cfg_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_pipe_clk = {
+ .halt_reg = 0x2c078,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2c078,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_pipe_clk",
+ .parent_names = (const char *[]){
+ "usb0_pipe_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_sleep_clk = {
+ .halt_reg = 0x2c058,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x2c058,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_usb0_sleep_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_sleep_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_axim_clk = {
+ .halt_reg = 0x2505c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2505c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_axim_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_axis_clk = {
+ .halt_reg = 0x25060,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25060,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_axis_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_dbg_ifc_apb_bdg_clk = {
+ .halt_reg = 0x25048,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25048,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_dbg_ifc_apb_bdg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_dap_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_dbg_ifc_apb_clk = {
+ .halt_reg = 0x25038,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25038,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_dbg_ifc_apb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_dap_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_dbg_ifc_atb_bdg_clk = {
+ .halt_reg = 0x2504c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2504c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_dbg_ifc_atb_bdg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_at_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_dbg_ifc_atb_clk = {
+ .halt_reg = 0x2503c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2503c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_dbg_ifc_atb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_at_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_dbg_ifc_nts_bdg_clk = {
+ .halt_reg = 0x25050,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25050,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_dbg_ifc_nts_bdg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_tsctr_div2_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_dbg_ifc_nts_clk = {
+ .halt_reg = 0x25040,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25040,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_dbg_ifc_nts_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_qdss_tsctr_div2_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_ecahb_clk = {
+ .halt_reg = 0x25058,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x25058,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_ecahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_wcss_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_mst_async_bdg_clk = {
+ .halt_reg = 0x2e0b0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e0b0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_mst_async_bdg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_wcss_slv_async_bdg_clk = {
+ .halt_reg = 0x2e0b4,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x2e0b4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_wcss_slv_async_bdg_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_system_noc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_xo_clk = {
+ .halt_reg = 0x34018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x34018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_xo_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_xo_div4_clk = {
+ .halt_reg = 0x3401c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x3401c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_xo_div4_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_xo_div4_clk_src.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_im_sleep_clk = {
+ .halt_reg = 0x34020,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x34020,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_im_sleep_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_sleep_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_nssnoc_pcnoc_1_clk = {
+ .halt_reg = 0x17080,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x17080,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_nssnoc_pcnoc_1_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mem_noc_ahb_clk = {
+ .halt_reg = 0x1900c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1900c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_mem_noc_ahb_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_pcnoc_bfdcd_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mem_noc_apss_axi_clk = {
+ .halt_reg = 0x1901c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(6),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_mem_noc_apss_axi_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_apss_axi_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_regmap_div gcc_snoc_qosgen_extref_div_clk_src = {
+ .reg = 0x2e010,
+ .shift = 0,
+ .width = 2,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "gcc_snoc_qosgen_extref_div_clk_src",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_branch gcc_mem_noc_qosgen_extref_clk = {
+ .halt_reg = 0x19024,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x19024,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data){
+ .name = "gcc_mem_noc_qosgen_extref_clk",
+ .parent_hws = (const struct clk_hw*[]){
+ &gcc_snoc_qosgen_extref_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_regmap *gcc_ipq5332_clocks[] = {
+ [GPLL0_MAIN] = &gpll0_main.clkr,
+ [GPLL0] = &gpll0.clkr,
+ [GPLL2_MAIN] = &gpll2_main.clkr,
+ [GPLL2] = &gpll2.clkr,
+ [GPLL4_MAIN] = &gpll4_main.clkr,
+ [GPLL4] = &gpll4.clkr,
+ [GCC_ADSS_PWM_CLK] = &gcc_adss_pwm_clk.clkr,
+ [GCC_ADSS_PWM_CLK_SRC] = &gcc_adss_pwm_clk_src.clkr,
+ [GCC_AHB_CLK] = &gcc_ahb_clk.clkr,
+ [GCC_APSS_AHB_CLK] = &gcc_apss_ahb_clk.clkr,
+ [GCC_APSS_AHB_CLK_SRC] = &gcc_apss_ahb_clk_src.clkr,
+ [GCC_APSS_AXI_CLK] = &gcc_apss_axi_clk.clkr,
+ [GCC_APSS_AXI_CLK_SRC] = &gcc_apss_axi_clk_src.clkr,
+ [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
+ [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC] = &gcc_blsp1_qup1_spi_apps_clk_src.clkr,
+ [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC] = &gcc_blsp1_qup2_spi_apps_clk_src.clkr,
+ [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC] = &gcc_blsp1_qup3_spi_apps_clk_src.clkr,
+ [GCC_BLSP1_SLEEP_CLK] = &gcc_blsp1_sleep_clk.clkr,
+ [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
+ [GCC_BLSP1_UART1_APPS_CLK_SRC] = &gcc_blsp1_uart1_apps_clk_src.clkr,
+ [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
+ [GCC_BLSP1_UART2_APPS_CLK_SRC] = &gcc_blsp1_uart2_apps_clk_src.clkr,
+ [GCC_BLSP1_UART3_APPS_CLK] = &gcc_blsp1_uart3_apps_clk.clkr,
+ [GCC_BLSP1_UART3_APPS_CLK_SRC] = &gcc_blsp1_uart3_apps_clk_src.clkr,
+ [GCC_CE_AHB_CLK] = &gcc_ce_ahb_clk.clkr,
+ [GCC_CE_AXI_CLK] = &gcc_ce_axi_clk.clkr,
+ [GCC_CE_PCNOC_AHB_CLK] = &gcc_ce_pcnoc_ahb_clk.clkr,
+ [GCC_CMN_12GPLL_AHB_CLK] = &gcc_cmn_12gpll_ahb_clk.clkr,
+ [GCC_CMN_12GPLL_APU_CLK] = &gcc_cmn_12gpll_apu_clk.clkr,
+ [GCC_CMN_12GPLL_SYS_CLK] = &gcc_cmn_12gpll_sys_clk.clkr,
+ [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+ [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
+ [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+ [GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
+ [GCC_LPASS_CORE_AXIM_CLK] = &gcc_lpass_core_axim_clk.clkr,
+ [GCC_LPASS_SWAY_CLK] = &gcc_lpass_sway_clk.clkr,
+ [GCC_LPASS_SWAY_CLK_SRC] = &gcc_lpass_sway_clk_src.clkr,
+ [GCC_MDIO_AHB_CLK] = &gcc_mdio_ahb_clk.clkr,
+ [GCC_MDIO_SLAVE_AHB_CLK] = &gcc_mdio_slave_ahb_clk.clkr,
+ [GCC_MEM_NOC_Q6_AXI_CLK] = &gcc_mem_noc_q6_axi_clk.clkr,
+ [GCC_MEM_NOC_TS_CLK] = &gcc_mem_noc_ts_clk.clkr,
+ [GCC_NSS_TS_CLK] = &gcc_nss_ts_clk.clkr,
+ [GCC_NSS_TS_CLK_SRC] = &gcc_nss_ts_clk_src.clkr,
+ [GCC_NSSCC_CLK] = &gcc_nsscc_clk.clkr,
+ [GCC_NSSCFG_CLK] = &gcc_nsscfg_clk.clkr,
+ [GCC_NSSNOC_ATB_CLK] = &gcc_nssnoc_atb_clk.clkr,
+ [GCC_NSSNOC_NSSCC_CLK] = &gcc_nssnoc_nsscc_clk.clkr,
+ [GCC_NSSNOC_QOSGEN_REF_CLK] = &gcc_nssnoc_qosgen_ref_clk.clkr,
+ [GCC_NSSNOC_SNOC_1_CLK] = &gcc_nssnoc_snoc_1_clk.clkr,
+ [GCC_NSSNOC_SNOC_CLK] = &gcc_nssnoc_snoc_clk.clkr,
+ [GCC_NSSNOC_TIMEOUT_REF_CLK] = &gcc_nssnoc_timeout_ref_clk.clkr,
+ [GCC_NSSNOC_XO_DCD_CLK] = &gcc_nssnoc_xo_dcd_clk.clkr,
+ [GCC_PCIE3X1_0_AHB_CLK] = &gcc_pcie3x1_0_ahb_clk.clkr,
+ [GCC_PCIE3X1_0_AUX_CLK] = &gcc_pcie3x1_0_aux_clk.clkr,
+ [GCC_PCIE3X1_0_AXI_CLK_SRC] = &gcc_pcie3x1_0_axi_clk_src.clkr,
+ [GCC_PCIE3X1_0_AXI_M_CLK] = &gcc_pcie3x1_0_axi_m_clk.clkr,
+ [GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK] = &gcc_pcie3x1_0_axi_s_bridge_clk.clkr,
+ [GCC_PCIE3X1_0_AXI_S_CLK] = &gcc_pcie3x1_0_axi_s_clk.clkr,
+ [GCC_PCIE3X1_0_PIPE_CLK] = &gcc_pcie3x1_0_pipe_clk.clkr,
+ [GCC_PCIE3X1_0_RCHG_CLK] = &gcc_pcie3x1_0_rchg_clk.clkr,
+ [GCC_PCIE3X1_0_RCHG_CLK_SRC] = &gcc_pcie3x1_0_rchg_clk_src.clkr,
+ [GCC_PCIE3X1_1_AHB_CLK] = &gcc_pcie3x1_1_ahb_clk.clkr,
+ [GCC_PCIE3X1_1_AUX_CLK] = &gcc_pcie3x1_1_aux_clk.clkr,
+ [GCC_PCIE3X1_1_AXI_CLK_SRC] = &gcc_pcie3x1_1_axi_clk_src.clkr,
+ [GCC_PCIE3X1_1_AXI_M_CLK] = &gcc_pcie3x1_1_axi_m_clk.clkr,
+ [GCC_PCIE3X1_1_AXI_S_BRIDGE_CLK] = &gcc_pcie3x1_1_axi_s_bridge_clk.clkr,
+ [GCC_PCIE3X1_1_AXI_S_CLK] = &gcc_pcie3x1_1_axi_s_clk.clkr,
+ [GCC_PCIE3X1_1_PIPE_CLK] = &gcc_pcie3x1_1_pipe_clk.clkr,
+ [GCC_PCIE3X1_1_RCHG_CLK] = &gcc_pcie3x1_1_rchg_clk.clkr,
+ [GCC_PCIE3X1_1_RCHG_CLK_SRC] = &gcc_pcie3x1_1_rchg_clk_src.clkr,
+ [GCC_PCIE3X1_PHY_AHB_CLK] = &gcc_pcie3x1_phy_ahb_clk.clkr,
+ [GCC_PCIE3X2_AHB_CLK] = &gcc_pcie3x2_ahb_clk.clkr,
+ [GCC_PCIE3X2_AUX_CLK] = &gcc_pcie3x2_aux_clk.clkr,
+ [GCC_PCIE3X2_AXI_M_CLK] = &gcc_pcie3x2_axi_m_clk.clkr,
+ [GCC_PCIE3X2_AXI_M_CLK_SRC] = &gcc_pcie3x2_axi_m_clk_src.clkr,
+ [GCC_PCIE3X2_AXI_S_BRIDGE_CLK] = &gcc_pcie3x2_axi_s_bridge_clk.clkr,
+ [GCC_PCIE3X2_AXI_S_CLK] = &gcc_pcie3x2_axi_s_clk.clkr,
+ [GCC_PCIE3X2_AXI_S_CLK_SRC] = &gcc_pcie3x2_axi_s_clk_src.clkr,
+ [GCC_PCIE3X2_PHY_AHB_CLK] = &gcc_pcie3x2_phy_ahb_clk.clkr,
+ [GCC_PCIE3X2_PIPE_CLK] = &gcc_pcie3x2_pipe_clk.clkr,
+ [GCC_PCIE3X2_RCHG_CLK] = &gcc_pcie3x2_rchg_clk.clkr,
+ [GCC_PCIE3X2_RCHG_CLK_SRC] = &gcc_pcie3x2_rchg_clk_src.clkr,
+ [GCC_PCIE_AUX_CLK_SRC] = &gcc_pcie_aux_clk_src.clkr,
+ [GCC_PCNOC_AT_CLK] = &gcc_pcnoc_at_clk.clkr,
+ [GCC_PCNOC_BFDCD_CLK_SRC] = &gcc_pcnoc_bfdcd_clk_src.clkr,
+ [GCC_PCNOC_LPASS_CLK] = &gcc_pcnoc_lpass_clk.clkr,
+ [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
+ [GCC_Q6_AHB_CLK] = &gcc_q6_ahb_clk.clkr,
+ [GCC_Q6_AHB_S_CLK] = &gcc_q6_ahb_s_clk.clkr,
+ [GCC_Q6_AXIM_CLK] = &gcc_q6_axim_clk.clkr,
+ [GCC_Q6_AXIM_CLK_SRC] = &gcc_q6_axim_clk_src.clkr,
+ [GCC_Q6_AXIS_CLK] = &gcc_q6_axis_clk.clkr,
+ [GCC_Q6_TSCTR_1TO2_CLK] = &gcc_q6_tsctr_1to2_clk.clkr,
+ [GCC_Q6SS_ATBM_CLK] = &gcc_q6ss_atbm_clk.clkr,
+ [GCC_Q6SS_PCLKDBG_CLK] = &gcc_q6ss_pclkdbg_clk.clkr,
+ [GCC_Q6SS_TRIG_CLK] = &gcc_q6ss_trig_clk.clkr,
+ [GCC_QDSS_AT_CLK] = &gcc_qdss_at_clk.clkr,
+ [GCC_QDSS_AT_CLK_SRC] = &gcc_qdss_at_clk_src.clkr,
+ [GCC_QDSS_CFG_AHB_CLK] = &gcc_qdss_cfg_ahb_clk.clkr,
+ [GCC_QDSS_DAP_AHB_CLK] = &gcc_qdss_dap_ahb_clk.clkr,
+ [GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
+ [GCC_QDSS_DAP_DIV_CLK_SRC] = &gcc_qdss_dap_div_clk_src.clkr,
+ [GCC_QDSS_ETR_USB_CLK] = &gcc_qdss_etr_usb_clk.clkr,
+ [GCC_QDSS_EUD_AT_CLK] = &gcc_qdss_eud_at_clk.clkr,
+ [GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr,
+ [GCC_QPIC_CLK] = &gcc_qpic_clk.clkr,
+ [GCC_QPIC_IO_MACRO_CLK] = &gcc_qpic_io_macro_clk.clkr,
+ [GCC_QPIC_IO_MACRO_CLK_SRC] = &gcc_qpic_io_macro_clk_src.clkr,
+ [GCC_QPIC_SLEEP_CLK] = &gcc_qpic_sleep_clk.clkr,
+ [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
+ [GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
+ [GCC_SDCC1_APPS_CLK_SRC] = &gcc_sdcc1_apps_clk_src.clkr,
+ [GCC_SLEEP_CLK_SRC] = &gcc_sleep_clk_src.clkr,
+ [GCC_SNOC_LPASS_CFG_CLK] = &gcc_snoc_lpass_cfg_clk.clkr,
+ [GCC_SNOC_NSSNOC_1_CLK] = &gcc_snoc_nssnoc_1_clk.clkr,
+ [GCC_SNOC_NSSNOC_CLK] = &gcc_snoc_nssnoc_clk.clkr,
+ [GCC_SNOC_PCIE3_1LANE_1_M_CLK] = &gcc_snoc_pcie3_1lane_1_m_clk.clkr,
+ [GCC_SNOC_PCIE3_1LANE_1_S_CLK] = &gcc_snoc_pcie3_1lane_1_s_clk.clkr,
+ [GCC_SNOC_PCIE3_1LANE_M_CLK] = &gcc_snoc_pcie3_1lane_m_clk.clkr,
+ [GCC_SNOC_PCIE3_1LANE_S_CLK] = &gcc_snoc_pcie3_1lane_s_clk.clkr,
+ [GCC_SNOC_PCIE3_2LANE_M_CLK] = &gcc_snoc_pcie3_2lane_m_clk.clkr,
+ [GCC_SNOC_PCIE3_2LANE_S_CLK] = &gcc_snoc_pcie3_2lane_s_clk.clkr,
+ [GCC_SNOC_USB_CLK] = &gcc_snoc_usb_clk.clkr,
+ [GCC_SYS_NOC_AT_CLK] = &gcc_sys_noc_at_clk.clkr,
+ [GCC_SYS_NOC_WCSS_AHB_CLK] = &gcc_sys_noc_wcss_ahb_clk.clkr,
+ [GCC_SYSTEM_NOC_BFDCD_CLK_SRC] = &gcc_system_noc_bfdcd_clk_src.clkr,
+ [GCC_UNIPHY0_AHB_CLK] = &gcc_uniphy0_ahb_clk.clkr,
+ [GCC_UNIPHY0_SYS_CLK] = &gcc_uniphy0_sys_clk.clkr,
+ [GCC_UNIPHY1_AHB_CLK] = &gcc_uniphy1_ahb_clk.clkr,
+ [GCC_UNIPHY1_SYS_CLK] = &gcc_uniphy1_sys_clk.clkr,
+ [GCC_UNIPHY_SYS_CLK_SRC] = &gcc_uniphy_sys_clk_src.clkr,
+ [GCC_USB0_AUX_CLK] = &gcc_usb0_aux_clk.clkr,
+ [GCC_USB0_AUX_CLK_SRC] = &gcc_usb0_aux_clk_src.clkr,
+ [GCC_USB0_EUD_AT_CLK] = &gcc_usb0_eud_at_clk.clkr,
+ [GCC_USB0_LFPS_CLK] = &gcc_usb0_lfps_clk.clkr,
+ [GCC_USB0_LFPS_CLK_SRC] = &gcc_usb0_lfps_clk_src.clkr,
+ [GCC_USB0_MASTER_CLK] = &gcc_usb0_master_clk.clkr,
+ [GCC_USB0_MASTER_CLK_SRC] = &gcc_usb0_master_clk_src.clkr,
+ [GCC_USB0_MOCK_UTMI_CLK] = &gcc_usb0_mock_utmi_clk.clkr,
+ [GCC_USB0_MOCK_UTMI_CLK_SRC] = &gcc_usb0_mock_utmi_clk_src.clkr,
+ [GCC_USB0_MOCK_UTMI_DIV_CLK_SRC] = &gcc_usb0_mock_utmi_div_clk_src.clkr,
+ [GCC_USB0_PHY_CFG_AHB_CLK] = &gcc_usb0_phy_cfg_ahb_clk.clkr,
+ [GCC_USB0_PIPE_CLK] = &gcc_usb0_pipe_clk.clkr,
+ [GCC_USB0_SLEEP_CLK] = &gcc_usb0_sleep_clk.clkr,
+ [GCC_WCSS_AHB_CLK_SRC] = &gcc_wcss_ahb_clk_src.clkr,
+ [GCC_WCSS_AXIM_CLK] = &gcc_wcss_axim_clk.clkr,
+ [GCC_WCSS_AXIS_CLK] = &gcc_wcss_axis_clk.clkr,
+ [GCC_WCSS_DBG_IFC_APB_BDG_CLK] = &gcc_wcss_dbg_ifc_apb_bdg_clk.clkr,
+ [GCC_WCSS_DBG_IFC_APB_CLK] = &gcc_wcss_dbg_ifc_apb_clk.clkr,
+ [GCC_WCSS_DBG_IFC_ATB_BDG_CLK] = &gcc_wcss_dbg_ifc_atb_bdg_clk.clkr,
+ [GCC_WCSS_DBG_IFC_ATB_CLK] = &gcc_wcss_dbg_ifc_atb_clk.clkr,
+ [GCC_WCSS_DBG_IFC_NTS_BDG_CLK] = &gcc_wcss_dbg_ifc_nts_bdg_clk.clkr,
+ [GCC_WCSS_DBG_IFC_NTS_CLK] = &gcc_wcss_dbg_ifc_nts_clk.clkr,
+ [GCC_WCSS_ECAHB_CLK] = &gcc_wcss_ecahb_clk.clkr,
+ [GCC_WCSS_MST_ASYNC_BDG_CLK] = &gcc_wcss_mst_async_bdg_clk.clkr,
+ [GCC_WCSS_SLV_ASYNC_BDG_CLK] = &gcc_wcss_slv_async_bdg_clk.clkr,
+ [GCC_XO_CLK] = &gcc_xo_clk.clkr,
+ [GCC_XO_CLK_SRC] = &gcc_xo_clk_src.clkr,
+ [GCC_XO_DIV4_CLK] = &gcc_xo_div4_clk.clkr,
+ [GCC_IM_SLEEP_CLK] = &gcc_im_sleep_clk.clkr,
+ [GCC_NSSNOC_PCNOC_1_CLK] = &gcc_nssnoc_pcnoc_1_clk.clkr,
+ [GCC_MEM_NOC_AHB_CLK] = &gcc_mem_noc_ahb_clk.clkr,
+ [GCC_MEM_NOC_APSS_AXI_CLK] = &gcc_mem_noc_apss_axi_clk.clkr,
+ [GCC_SNOC_QOSGEN_EXTREF_DIV_CLK_SRC] = &gcc_snoc_qosgen_extref_div_clk_src.clkr,
+ [GCC_MEM_NOC_QOSGEN_EXTREF_CLK] = &gcc_mem_noc_qosgen_extref_clk.clkr,
+ [GCC_PCIE3X2_PIPE_CLK_SRC] = &pcie3x2_pipe_clk_src.clkr,
+ [GCC_PCIE3X1_0_PIPE_CLK_SRC] = &pcie3x1_0_pipe_clk_src.clkr,
+ [GCC_PCIE3X1_1_PIPE_CLK_SRC] = &pcie3x1_1_pipe_clk_src.clkr,
+ [GCC_USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
+};
+
+static const struct qcom_reset_map gcc_ipq5332_resets[] = {
+ [GCC_ADSS_BCR] = { 0x1c000 },
+ [GCC_ADSS_PWM_CLK_ARES] = { 0x1c00c, 2 },
+ [GCC_AHB_CLK_ARES] = { 0x34024, 2 },
+ [GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR] = { 0x38000 },
+ [GCC_APC0_VOLTAGE_DROOP_DETECTOR_GPLL0_CLK_ARES] = { 0x3800c, 2 },
+ [GCC_APSS_AHB_CLK_ARES] = { 0x24018, 2 },
+ [GCC_APSS_AXI_CLK_ARES] = { 0x2401c, 2 },
+ [GCC_BLSP1_AHB_CLK_ARES] = { 0x1008, 2 },
+ [GCC_BLSP1_BCR] = { 0x1000 },
+ [GCC_BLSP1_QUP1_BCR] = { 0x2000 },
+ [GCC_BLSP1_QUP1_I2C_APPS_CLK_ARES] = { 0x2024, 2 },
+ [GCC_BLSP1_QUP1_SPI_APPS_CLK_ARES] = { 0x2020, 2 },
+ [GCC_BLSP1_QUP2_BCR] = { 0x3000 },
+ [GCC_BLSP1_QUP2_I2C_APPS_CLK_ARES] = { 0x3024, 2 },
+ [GCC_BLSP1_QUP2_SPI_APPS_CLK_ARES] = { 0x3020, 2 },
+ [GCC_BLSP1_QUP3_BCR] = { 0x4000 },
+ [GCC_BLSP1_QUP3_I2C_APPS_CLK_ARES] = { 0x4024, 2 },
+ [GCC_BLSP1_QUP3_SPI_APPS_CLK_ARES] = { 0x4020, 2 },
+ [GCC_BLSP1_SLEEP_CLK_ARES] = { 0x1010, 2 },
+ [GCC_BLSP1_UART1_APPS_CLK_ARES] = { 0x2040, 2 },
+ [GCC_BLSP1_UART1_BCR] = { 0x2028 },
+ [GCC_BLSP1_UART2_APPS_CLK_ARES] = { 0x3040, 2 },
+ [GCC_BLSP1_UART2_BCR] = { 0x3028 },
+ [GCC_BLSP1_UART3_APPS_CLK_ARES] = { 0x4054, 2 },
+ [GCC_BLSP1_UART3_BCR] = { 0x4028 },
+ [GCC_CE_BCR] = { 0x18008 },
+ [GCC_CMN_BLK_BCR] = { 0x3a000 },
+ [GCC_CMN_LDO0_BCR] = { 0x1d000 },
+ [GCC_CMN_LDO1_BCR] = { 0x1d008 },
+ [GCC_DCC_BCR] = { 0x35000 },
+ [GCC_GP1_CLK_ARES] = { 0x8018, 2 },
+ [GCC_GP2_CLK_ARES] = { 0x9018, 2 },
+ [GCC_LPASS_BCR] = { 0x27000 },
+ [GCC_LPASS_CORE_AXIM_CLK_ARES] = { 0x27018, 2 },
+ [GCC_LPASS_SWAY_CLK_ARES] = { 0x27014, 2 },
+ [GCC_MDIOM_BCR] = { 0x12000 },
+ [GCC_MDIOS_BCR] = { 0x12008 },
+ [GCC_NSS_BCR] = { 0x17000 },
+ [GCC_NSS_TS_CLK_ARES] = { 0x17018, 2 },
+ [GCC_NSSCC_CLK_ARES] = { 0x17034, 2 },
+ [GCC_NSSCFG_CLK_ARES] = { 0x1702c, 2 },
+ [GCC_NSSNOC_ATB_CLK_ARES] = { 0x17014, 2 },
+ [GCC_NSSNOC_NSSCC_CLK_ARES] = { 0x17030, 2 },
+ [GCC_NSSNOC_QOSGEN_REF_CLK_ARES] = { 0x1701c, 2 },
+ [GCC_NSSNOC_SNOC_1_CLK_ARES] = { 0x1707c, 2 },
+ [GCC_NSSNOC_SNOC_CLK_ARES] = { 0x17028, 2 },
+ [GCC_NSSNOC_TIMEOUT_REF_CLK_ARES] = { 0x17020, 2 },
+ [GCC_NSSNOC_XO_DCD_CLK_ARES] = { 0x17074, 2 },
+ [GCC_PCIE3X1_0_AHB_CLK_ARES] = { 0x29030, 2 },
+ [GCC_PCIE3X1_0_AUX_CLK_ARES] = { 0x29070, 2 },
+ [GCC_PCIE3X1_0_AXI_M_CLK_ARES] = { 0x29038, 2 },
+ [GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK_ARES] = { 0x29048, 2 },
+ [GCC_PCIE3X1_0_AXI_S_CLK_ARES] = { 0x29040, 2 },
+ [GCC_PCIE3X1_0_BCR] = { 0x29000 },
+ [GCC_PCIE3X1_0_LINK_DOWN_BCR] = { 0x29054 },
+ [GCC_PCIE3X1_0_PHY_BCR] = { 0x29060 },
+ [GCC_PCIE3X1_0_PHY_PHY_BCR] = { 0x2905c },
+ [GCC_PCIE3X1_1_AHB_CLK_ARES] = { 0x2a00c, 2 },
+ [GCC_PCIE3X1_1_AUX_CLK_ARES] = { 0x2a070, 2 },
+ [GCC_PCIE3X1_1_AXI_M_CLK_ARES] = { 0x2a014, 2 },
+ [GCC_PCIE3X1_1_AXI_S_BRIDGE_CLK_ARES] = { 0x2a024, 2 },
+ [GCC_PCIE3X1_1_AXI_S_CLK_ARES] = { 0x2a01c, 2 },
+ [GCC_PCIE3X1_1_BCR] = { 0x2a000 },
+ [GCC_PCIE3X1_1_LINK_DOWN_BCR] = { 0x2a028 },
+ [GCC_PCIE3X1_1_PHY_BCR] = { 0x2a030 },
+ [GCC_PCIE3X1_1_PHY_PHY_BCR] = { 0x2a02c },
+ [GCC_PCIE3X1_PHY_AHB_CLK_ARES] = { 0x29078, 2 },
+ [GCC_PCIE3X2_AHB_CLK_ARES] = { 0x28030, 2 },
+ [GCC_PCIE3X2_AUX_CLK_ARES] = { 0x28070, 2 },
+ [GCC_PCIE3X2_AXI_M_CLK_ARES] = { 0x28038, 2 },
+ [GCC_PCIE3X2_AXI_S_BRIDGE_CLK_ARES] = { 0x28048, 2 },
+ [GCC_PCIE3X2_AXI_S_CLK_ARES] = { 0x28040, 2 },
+ [GCC_PCIE3X2_BCR] = { 0x28000 },
+ [GCC_PCIE3X2_LINK_DOWN_BCR] = { 0x28054 },
+ [GCC_PCIE3X2_PHY_AHB_CLK_ARES] = { 0x28080, 2 },
+ [GCC_PCIE3X2_PHY_BCR] = { 0x28060 },
+ [GCC_PCIE3X2PHY_PHY_BCR] = { 0x2805c },
+ [GCC_PCNOC_BCR] = { 0x31000 },
+ [GCC_PCNOC_LPASS_CLK_ARES] = { 0x31020, 2 },
+ [GCC_PRNG_AHB_CLK_ARES] = { 0x13024, 2 },
+ [GCC_PRNG_BCR] = { 0x13020 },
+ [GCC_Q6_AHB_CLK_ARES] = { 0x25014, 2 },
+ [GCC_Q6_AHB_S_CLK_ARES] = { 0x25018, 2 },
+ [GCC_Q6_AXIM_CLK_ARES] = { 0x2500c, 2 },
+ [GCC_Q6_AXIS_CLK_ARES] = { 0x25010, 2 },
+ [GCC_Q6_TSCTR_1TO2_CLK_ARES] = { 0x25020, 2 },
+ [GCC_Q6SS_ATBM_CLK_ARES] = { 0x2501c, 2 },
+ [GCC_Q6SS_PCLKDBG_CLK_ARES] = { 0x25024, 2 },
+ [GCC_Q6SS_TRIG_CLK_ARES] = { 0x250a0, 2 },
+ [GCC_QDSS_APB2JTAG_CLK_ARES] = { 0x2d060, 2 },
+ [GCC_QDSS_AT_CLK_ARES] = { 0x2d038, 2 },
+ [GCC_QDSS_BCR] = { 0x2d000 },
+ [GCC_QDSS_CFG_AHB_CLK_ARES] = { 0x2d06c, 2 },
+ [GCC_QDSS_DAP_AHB_CLK_ARES] = { 0x2d068, 2 },
+ [GCC_QDSS_DAP_CLK_ARES] = { 0x2d05c, 2 },
+ [GCC_QDSS_ETR_USB_CLK_ARES] = { 0x2d064, 2 },
+ [GCC_QDSS_EUD_AT_CLK_ARES] = { 0x2d070, 2 },
+ [GCC_QDSS_STM_CLK_ARES] = { 0x2d040, 2 },
+ [GCC_QDSS_TRACECLKIN_CLK_ARES] = { 0x2d044, 2 },
+ [GCC_QDSS_TS_CLK_ARES] = { 0x2d078, 2 },
+ [GCC_QDSS_TSCTR_DIV16_CLK_ARES] = { 0x2d058, 2 },
+ [GCC_QDSS_TSCTR_DIV2_CLK_ARES] = { 0x2d048, 2 },
+ [GCC_QDSS_TSCTR_DIV3_CLK_ARES] = { 0x2d04c, 2 },
+ [GCC_QDSS_TSCTR_DIV4_CLK_ARES] = { 0x2d050, 2 },
+ [GCC_QDSS_TSCTR_DIV8_CLK_ARES] = { 0x2d054, 2 },
+ [GCC_QPIC_AHB_CLK_ARES] = { 0x32010, 2 },
+ [GCC_QPIC_CLK_ARES] = { 0x32014, 2 },
+ [GCC_QPIC_BCR] = { 0x32000 },
+ [GCC_QPIC_IO_MACRO_CLK_ARES] = { 0x3200c, 2 },
+ [GCC_QPIC_SLEEP_CLK_ARES] = { 0x3201c, 2 },
+ [GCC_QUSB2_0_PHY_BCR] = { 0x2c068 },
+ [GCC_SDCC1_AHB_CLK_ARES] = { 0x33034, 2 },
+ [GCC_SDCC1_APPS_CLK_ARES] = { 0x3302c, 2 },
+ [GCC_SDCC_BCR] = { 0x33000 },
+ [GCC_SNOC_BCR] = { 0x2e000 },
+ [GCC_SNOC_LPASS_CFG_CLK_ARES] = { 0x2e028, 2 },
+ [GCC_SNOC_NSSNOC_1_CLK_ARES] = { 0x17090, 2 },
+ [GCC_SNOC_NSSNOC_CLK_ARES] = { 0x17084, 2 },
+ [GCC_SYS_NOC_QDSS_STM_AXI_CLK_ARES] = { 0x2e034, 2 },
+ [GCC_SYS_NOC_WCSS_AHB_CLK_ARES] = { 0x2e030, 2 },
+ [GCC_UNIPHY0_AHB_CLK_ARES] = { 0x16010, 2 },
+ [GCC_UNIPHY0_BCR] = { 0x16000 },
+ [GCC_UNIPHY0_SYS_CLK_ARES] = { 0x1600c, 2 },
+ [GCC_UNIPHY1_AHB_CLK_ARES] = { 0x1601c, 2 },
+ [GCC_UNIPHY1_BCR] = { 0x16014 },
+ [GCC_UNIPHY1_SYS_CLK_ARES] = { 0x16018, 2 },
+ [GCC_USB0_AUX_CLK_ARES] = { 0x2c050, 2 },
+ [GCC_USB0_EUD_AT_CLK_ARES] = { 0x30004, 2 },
+ [GCC_USB0_LFPS_CLK_ARES] = { 0x2c090, 2 },
+ [GCC_USB0_MASTER_CLK_ARES] = { 0x2c048, 2 },
+ [GCC_USB0_MOCK_UTMI_CLK_ARES] = { 0x2c054, 2 },
+ [GCC_USB0_PHY_BCR] = { 0x2c06c },
+ [GCC_USB0_PHY_CFG_AHB_CLK_ARES] = { 0x2c05c, 2 },
+ [GCC_USB0_SLEEP_CLK_ARES] = { 0x2c058, 2 },
+ [GCC_USB3PHY_0_PHY_BCR] = { 0x2c070 },
+ [GCC_USB_BCR] = { 0x2c000 },
+ [GCC_WCSS_AXIM_CLK_ARES] = { 0x2505c, 2 },
+ [GCC_WCSS_AXIS_CLK_ARES] = { 0x25060, 2 },
+ [GCC_WCSS_BCR] = { 0x18004 },
+ [GCC_WCSS_DBG_IFC_APB_BDG_CLK_ARES] = { 0x25048, 2 },
+ [GCC_WCSS_DBG_IFC_APB_CLK_ARES] = { 0x25038, 2 },
+ [GCC_WCSS_DBG_IFC_ATB_BDG_CLK_ARES] = { 0x2504c, 2 },
+ [GCC_WCSS_DBG_IFC_ATB_CLK_ARES] = { 0x2503c, 2 },
+ [GCC_WCSS_DBG_IFC_NTS_BDG_CLK_ARES] = { 0x25050, 2 },
+ [GCC_WCSS_DBG_IFC_NTS_CLK_ARES] = { 0x25040, 2 },
+ [GCC_WCSS_ECAHB_CLK_ARES] = { 0x25058, 2 },
+ [GCC_WCSS_MST_ASYNC_BDG_CLK_ARES] = { 0x2e0b0, 2 },
+ [GCC_WCSS_Q6_BCR] = { 0x18000 },
+ [GCC_WCSS_SLV_ASYNC_BDG_CLK_ARES] = { 0x2e0b4, 2 },
+ [GCC_XO_CLK_ARES] = { 0x34018, 2 },
+ [GCC_XO_DIV4_CLK_ARES] = { 0x3401c, 2 },
+ [GCC_Q6SS_DBG_ARES] = { 0x25094 },
+ [GCC_WCSS_DBG_BDG_ARES] = { 0x25098, 0 },
+ [GCC_WCSS_DBG_ARES] = { 0x25098, 1 },
+ [GCC_WCSS_AXI_S_ARES] = { 0x25098, 2 },
+ [GCC_WCSS_AXI_M_ARES] = { 0x25098, 3 },
+ [GCC_WCSSAON_ARES] = { 0x2509C },
+ [GCC_PCIE3X2_PIPE_ARES] = { 0x28058, 0 },
+ [GCC_PCIE3X2_CORE_STICKY_ARES] = { 0x28058, 1 },
+ [GCC_PCIE3X2_AXI_S_STICKY_ARES] = { 0x28058, 2 },
+ [GCC_PCIE3X2_AXI_M_STICKY_ARES] = { 0x28058, 3 },
+ [GCC_PCIE3X1_0_PIPE_ARES] = { 0x29058, 0 },
+ [GCC_PCIE3X1_0_CORE_STICKY_ARES] = { 0x29058, 1 },
+ [GCC_PCIE3X1_0_AXI_S_STICKY_ARES] = { 0x29058, 2 },
+ [GCC_PCIE3X1_0_AXI_M_STICKY_ARES] = { 0x29058, 3 },
+ [GCC_PCIE3X1_1_PIPE_ARES] = { 0x2a058, 0 },
+ [GCC_PCIE3X1_1_CORE_STICKY_ARES] = { 0x2a058, 1 },
+ [GCC_PCIE3X1_1_AXI_S_STICKY_ARES] = { 0x2a058, 2 },
+ [GCC_PCIE3X1_1_AXI_M_STICKY_ARES] = { 0x2a058, 3 },
+ [GCC_IM_SLEEP_CLK_ARES] = { 0x34020, 2 },
+ [GCC_NSSNOC_PCNOC_1_CLK_ARES] = { 0x17080, 2 },
+ [GCC_UNIPHY0_XPCS_ARES] = { 0x16050 },
+ [GCC_UNIPHY1_XPCS_ARES] = { 0x16060 },
+};
+
+static const struct regmap_config gcc_ipq5332_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x3f024,
+ .fast_io = true,
+};
+
+static struct clk_hw *gcc_ipq5332_hws[] = {
+ &gpll0_div2.hw,
+ &gcc_xo_div4_clk_src.hw,
+ &gcc_system_noc_bfdcd_div2_clk_src.hw,
+ &gcc_qdss_tsctr_div2_clk_src.hw,
+ &gcc_qdss_tsctr_div3_clk_src.hw,
+ &gcc_qdss_tsctr_div4_clk_src.hw,
+ &gcc_qdss_tsctr_div8_clk_src.hw,
+ &gcc_qdss_tsctr_div16_clk_src.hw,
+ &gcc_eud_at_div_clk_src.hw,
+};
+
+static const struct qcom_cc_desc gcc_ipq5332_desc = {
+ .config = &gcc_ipq5332_regmap_config,
+ .clks = gcc_ipq5332_clocks,
+ .num_clks = ARRAY_SIZE(gcc_ipq5332_clocks),
+ .resets = gcc_ipq5332_resets,
+ .num_resets = ARRAY_SIZE(gcc_ipq5332_resets),
+ .clk_hws = gcc_ipq5332_hws,
+ .num_clk_hws = ARRAY_SIZE(gcc_ipq5332_hws),
+};
+
+static int gcc_ipq5332_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &gcc_ipq5332_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return qcom_cc_really_probe(pdev, &gcc_ipq5332_desc, regmap);
+}
+
+static const struct of_device_id gcc_ipq5332_match_table[] = {
+ { .compatible = "qcom,ipq5332-gcc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gcc_ipq5332_match_table);
+
+static struct platform_driver gcc_ipq5332_driver = {
+ .probe = gcc_ipq5332_probe,
+ .driver = {
+ .name = "gcc-ipq5332",
+ .of_match_table = gcc_ipq5332_match_table,
+ },
+};
+
+static int __init gcc_ipq5332_init(void)
+{
+ return platform_driver_register(&gcc_ipq5332_driver);
+}
+core_initcall(gcc_ipq5332_init);
+
+static void __exit gcc_ipq5332_exit(void)
+{
+ platform_driver_unregister(&gcc_ipq5332_driver);
+}
+module_exit(gcc_ipq5332_exit);
+
+MODULE_DESCRIPTION("QTI GCC IPQ5332 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Document the new ipq5332 SoC/board device tree bindings
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 27063a045bd0..a3568c7d3cc9 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -30,6 +30,7 @@ description: |
apq8084
apq8096
ipq4018
+ ipq5332
ipq6018
ipq8074
mdm9615
@@ -82,6 +83,7 @@ description: |
hk10-c2
idp
liquid
+ mi01.2
mtp
qrd
sbc
@@ -291,6 +293,11 @@ properties:
- qcom,ipq4019-dk04.1-c1
- const: qcom,ipq4019
+ - items:
+ - enum:
+ - qcom,ipq5332-ap-mi01.2
+ - const: qcom,ipq5332
+
- items:
- enum:
- mikrotik,rb3011
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Document the new ipq5332 SoC/board device tree bindings
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 27063a045bd0..a3568c7d3cc9 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -30,6 +30,7 @@ description: |
apq8084
apq8096
ipq4018
+ ipq5332
ipq6018
ipq8074
mdm9615
@@ -82,6 +83,7 @@ description: |
hk10-c2
idp
liquid
+ mi01.2
mtp
qrd
sbc
@@ -291,6 +293,11 @@ properties:
- qcom,ipq4019-dk04.1-c1
- const: qcom,ipq4019
+ - items:
+ - enum:
+ - qcom,ipq5332-ap-mi01.2
+ - const: qcom,ipq5332
+
- items:
- enum:
- mikrotik,rb3011
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Document the compatible for IPQ5332 SCM.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 25688571ee7c..5acb95e23dee 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -24,6 +24,7 @@ properties:
- qcom,scm-apq8064
- qcom,scm-apq8084
- qcom,scm-ipq4019
+ - qcom,scm-ipq5332
- qcom,scm-ipq6018
- qcom,scm-ipq806x
- qcom,scm-ipq8074
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Document the compatible for IPQ5332 SCM.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 25688571ee7c..5acb95e23dee 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -24,6 +24,7 @@ properties:
- qcom,scm-apq8064
- qcom,scm-apq8084
- qcom,scm-ipq4019
+ - qcom,scm-ipq5332
- qcom,scm-ipq6018
- qcom,scm-ipq806x
- qcom,scm-ipq8074
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
The IPQ5332 supports eMMC with an SDHCI controller. Add the appropriate
compatible to the documentation.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 6b89238f0565..ead91f95e877 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -34,6 +34,7 @@ properties:
- const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
- items:
- enum:
+ - qcom,ipq5332-sdhci
- qcom,qcs404-sdhci
- qcom,sc7180-sdhci
- qcom,sc7280-sdhci
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
The IPQ5332 supports eMMC with an SDHCI controller. Add the appropriate
compatible to the documentation.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 6b89238f0565..ead91f95e877 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -34,6 +34,7 @@ properties:
- const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
- items:
- enum:
+ - qcom,ipq5332-sdhci
- qcom,qcs404-sdhci
- qcom,sc7180-sdhci
- qcom,sc7280-sdhci
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add initial device tree support for the Qualcomm IPQ5332 SoC and
MI01.2 board.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
3 files changed, 345 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 3e79496292e7..fbd5bc583a9b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
new file mode 100644
index 000000000000..7984d8f824ce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 AP-MI01.2 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
+ compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
+
+ aliases {
+ serial0 = &blsp1_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+};
+
+&blsp1_uart0 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhc {
+ pinctrl-0 = <&sdc_default_state>;
+ pinctrl-names = "default";
+ non-removable;
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&xo_board {
+ clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+ sdc_default_state: sdc-default-state {
+ clk-pins {
+ pins = "gpio13";
+ function = "sdc_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio12";
+ function = "sdc_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "sdc_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
new file mode 100644
index 000000000000..d04244a3cd3a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ xo_board: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <0x2>;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq5332", "qcom,scm";
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x40000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz: memory@4a600000 {
+ no-map;
+ reg = <0x0 0x4a600000 0x0 0x200000>;
+ };
+ };
+
+ soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5332-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 53>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ serial_0_pins: serial0-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp0_uart0";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,ipq5332-gcc";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <0x1>;
+ #reset-cells = <0x1>;
+ #power-domain-cells = <1>;
+ clock-names = "xo",
+ "sleep_clk",
+ "pcie_2lane_phy_pipe_clk",
+ "pcie_2lane_phy_pipe_clk_x1",
+ "usb_pcie_wrapper_pipe_clk";
+ clocks = <&xo_board>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>;
+ };
+
+ sdhc: mmc@7804000 {
+ compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+
+ interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <192000000>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ blsp1_uart0: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <0x3>;
+ reg = <0x0b000000 0x1000>, /* GICD */
+ <0x0b002000 0x1000>, /* GICC */
+ <0x0b001000 0x1000>, /* GICH */
+ <0x0b004000 0x1000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ ranges = <0 0x0b00c000 0x3000>;
+
+ v2m0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x0 0xffd>;
+ msi-controller;
+ };
+
+ v2m1: v2m@1 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00001000 0xffd>;
+ msi-controller;
+ };
+
+ v2m2: v2m@2 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00002000 0xffd>;
+ msi-controller;
+ };
+ };
+
+ timer@b120000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@b120000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ };
+
+ frame@b123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b128000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Add initial device tree support for the Qualcomm IPQ5332 SoC and
MI01.2 board.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
3 files changed, 345 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 3e79496292e7..fbd5bc583a9b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
new file mode 100644
index 000000000000..7984d8f824ce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 AP-MI01.2 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
+ compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
+
+ aliases {
+ serial0 = &blsp1_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+};
+
+&blsp1_uart0 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhc {
+ pinctrl-0 = <&sdc_default_state>;
+ pinctrl-names = "default";
+ non-removable;
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&xo_board {
+ clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+ sdc_default_state: sdc-default-state {
+ clk-pins {
+ pins = "gpio13";
+ function = "sdc_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio12";
+ function = "sdc_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "sdc_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
new file mode 100644
index 000000000000..d04244a3cd3a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ xo_board: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <0x2>;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq5332", "qcom,scm";
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x40000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz: memory@4a600000 {
+ no-map;
+ reg = <0x0 0x4a600000 0x0 0x200000>;
+ };
+ };
+
+ soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5332-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 53>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ serial_0_pins: serial0-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp0_uart0";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,ipq5332-gcc";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <0x1>;
+ #reset-cells = <0x1>;
+ #power-domain-cells = <1>;
+ clock-names = "xo",
+ "sleep_clk",
+ "pcie_2lane_phy_pipe_clk",
+ "pcie_2lane_phy_pipe_clk_x1",
+ "usb_pcie_wrapper_pipe_clk";
+ clocks = <&xo_board>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>;
+ };
+
+ sdhc: mmc@7804000 {
+ compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+
+ interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <192000000>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ blsp1_uart0: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <0x3>;
+ reg = <0x0b000000 0x1000>, /* GICD */
+ <0x0b002000 0x1000>, /* GICC */
+ <0x0b001000 0x1000>, /* GICH */
+ <0x0b004000 0x1000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ ranges = <0 0x0b00c000 0x3000>;
+
+ v2m0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x0 0xffd>;
+ msi-controller;
+ };
+
+ v2m1: v2m@1 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00001000 0xffd>;
+ msi-controller;
+ };
+
+ v2m2: v2m@2 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00002000 0xffd>;
+ msi-controller;
+ };
+ };
+
+ timer@b120000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@b120000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ };
+
+ frame@b123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b128000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 10/10] arm64: defconfig: Enable IPQ5332 SoC base configs
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Enable the clock and pinctrl related configs which are required for the
bootup.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 851e8f9be06d..e6a99972f07c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -544,6 +544,7 @@ CONFIG_PINCTRL_IMX8ULP=y
CONFIG_PINCTRL_IMX93=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_IPQ5332=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
@@ -1091,6 +1092,7 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y
CONFIG_QCOM_CLK_APCC_MSM8996=y
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_QCOM_CLK_RPMH=y
+CONFIG_IPQ_GCC_5332=y
CONFIG_IPQ_GCC_6018=y
CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8916=y
--
2.34.1
^ permalink raw reply related [flat|nested] 67+ messages in thread
* [PATCH 10/10] arm64: defconfig: Enable IPQ5332 SoC base configs
@ 2023-01-25 10:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 10:45 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Cc: Kathiravan T
From: Kathiravan T <quic_kathirav@quicinc.com>
Enable the clock and pinctrl related configs which are required for the
bootup.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 851e8f9be06d..e6a99972f07c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -544,6 +544,7 @@ CONFIG_PINCTRL_IMX8ULP=y
CONFIG_PINCTRL_IMX93=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_IPQ5332=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
@@ -1091,6 +1092,7 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y
CONFIG_QCOM_CLK_APCC_MSM8996=y
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_QCOM_CLK_RPMH=y
+CONFIG_IPQ_GCC_5332=y
CONFIG_IPQ_GCC_6018=y
CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8916=y
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 11:10 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:10 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add device tree bindings for IPQ5332 TLMM block.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> .../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 ++++++++++++++++++
> 1 file changed, 134 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
> new file mode 100644
> index 000000000000..d101ee04b8b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
Name matching compatible, please.
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm IPQ5332 TLMM pin controller
> +
> +maintainers:
> + - Bjorn Andersson <andersson@kernel.org>
> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> +
> +description: |
> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
> +
> +allOf:
> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> + compatible:
> + const: qcom,ipq5332-tlmm
> +
> + reg:
> + maxItems: 1
> +
> + interrupts: true
missing maxItems
Rebase your patches on latest next and use the latest bindings and
drivers as starting point.
> + interrupt-controller: true
> + "#interrupt-cells": true
> + gpio-controller: true
> + "#gpio-cells": true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> + gpio-reserved-ranges:
> + minItems: 1
> + maxItems: 27
> +
> + gpio-line-names:
> + maxItems: 53
You have 54 GPIOs.
> +
> +patternProperties:
> + "-state$":
> + oneOf:
> + - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
> + - patternProperties:
> + "-pins$":
> + $ref: "#/$defs/qcom-ipq5332-tlmm-state"
> + additionalProperties: false
> +
> +$defs:
> + qcom-ipq5332-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> +
> + enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
1. lowercase only
2. order all these by name
> + atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
> + audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
> + blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
> + blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
> + blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
> + core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
> + cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
> + lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
@ 2023-01-25 11:10 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:10 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add device tree bindings for IPQ5332 TLMM block.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> .../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 ++++++++++++++++++
> 1 file changed, 134 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
> new file mode 100644
> index 000000000000..d101ee04b8b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
Name matching compatible, please.
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm IPQ5332 TLMM pin controller
> +
> +maintainers:
> + - Bjorn Andersson <andersson@kernel.org>
> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> +
> +description: |
> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
> +
> +allOf:
> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> + compatible:
> + const: qcom,ipq5332-tlmm
> +
> + reg:
> + maxItems: 1
> +
> + interrupts: true
missing maxItems
Rebase your patches on latest next and use the latest bindings and
drivers as starting point.
> + interrupt-controller: true
> + "#interrupt-cells": true
> + gpio-controller: true
> + "#gpio-cells": true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> + gpio-reserved-ranges:
> + minItems: 1
> + maxItems: 27
> +
> + gpio-line-names:
> + maxItems: 53
You have 54 GPIOs.
> +
> +patternProperties:
> + "-state$":
> + oneOf:
> + - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
> + - patternProperties:
> + "-pins$":
> + $ref: "#/$defs/qcom-ipq5332-tlmm-state"
> + additionalProperties: false
> +
> +$defs:
> + qcom-ipq5332-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> +
> + enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
1. lowercase only
2. order all these by name
> + atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
> + audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
> + blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
> + blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
> + blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
> + core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
> + cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
> + lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 11:13 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:13 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add binding for the Qualcomm IPQ5332 Global Clock Controller.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
Thank you for your patch. There is something to discuss/improve.
> + clocks:
> + items:
> + - description: Board XO clock source
> + - description: Sleep clock source
> + - description: PCIE 2lane PHY pipe clock source
> + - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
> + - description: USB PCIE wrapper pipe clock source
> +
> + clock-names:
> + items:
> + - const: xo
> + - const: sleep_clk
> + - const: pcie_2lane_phy_pipe_clk
> + - const: pcie_2lane_phy_pipe_clk_x1
> + - const: usb_pcie_wrapper_pipe_clk
> +
> +required:
> + - compatible
clocks are required
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + clock-controller@1800000 {
> + compatible = "qcom,ipq5332-gcc";
> + reg = <0x01800000 0x80000>;
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> + #reset-cells = <1>;
> + };
> +...
> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5332.h b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
> new file mode 100644
> index 000000000000..a305c648b724
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
Filename should match bindings/compatible.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC
@ 2023-01-25 11:13 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:13 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add binding for the Qualcomm IPQ5332 Global Clock Controller.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
Thank you for your patch. There is something to discuss/improve.
> + clocks:
> + items:
> + - description: Board XO clock source
> + - description: Sleep clock source
> + - description: PCIE 2lane PHY pipe clock source
> + - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
> + - description: USB PCIE wrapper pipe clock source
> +
> + clock-names:
> + items:
> + - const: xo
> + - const: sleep_clk
> + - const: pcie_2lane_phy_pipe_clk
> + - const: pcie_2lane_phy_pipe_clk_x1
> + - const: usb_pcie_wrapper_pipe_clk
> +
> +required:
> + - compatible
clocks are required
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + clock-controller@1800000 {
> + compatible = "qcom,ipq5332-gcc";
> + reg = <0x01800000 0x80000>;
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> + #reset-cells = <1>;
> + };
> +...
> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5332.h b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
> new file mode 100644
> index 000000000000..a305c648b724
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
Filename should match bindings/compatible.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
2023-01-25 10:45 ` [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC Kathiravan Thirumoorthy
@ 2023-01-25 11:14 ` Krzysztof Kozlowski
2023-01-25 20:54 ` Stephen Boyd
1 sibling, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:14 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add support for the global clock controller found on IPQ5332 SoC.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> drivers/clk/qcom/Kconfig | 7 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/gcc-ipq5332.c | 3954 ++++++++++++++++++++++++++++++++
> 3 files changed, 3962 insertions(+)
> create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 70d43f0a8919..1d300c89ecfc 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -141,6 +141,13 @@ config IPQ_GCC_4019
> Say Y if you want to use peripheral devices such as UART, SPI,
> i2c, USB, SD/eMMC, etc.
>
> +config IPQ_GCC_5332
> + tristate "IPQ5332 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
@ 2023-01-25 11:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:14 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add support for the global clock controller found on IPQ5332 SoC.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> drivers/clk/qcom/Kconfig | 7 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/gcc-ipq5332.c | 3954 ++++++++++++++++++++++++++++++++
> 3 files changed, 3962 insertions(+)
> create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 70d43f0a8919..1d300c89ecfc 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -141,6 +141,13 @@ config IPQ_GCC_4019
> Say Y if you want to use peripheral devices such as UART, SPI,
> i2c, USB, SD/eMMC, etc.
>
> +config IPQ_GCC_5332
> + tristate "IPQ5332 Global Clock Controller"
depends on ARM64 || COMPILE_TEST
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 11:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:15 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Document the new ipq5332 SoC/board device tree bindings
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 27063a045bd0..a3568c7d3cc9 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -30,6 +30,7 @@ description: |
> apq8084
> apq8096
> ipq4018
> + ipq5332
> ipq6018
> ipq8074
> mdm9615
> @@ -82,6 +83,7 @@ description: |
> hk10-c2
> idp
> liquid
> + mi01.2
Is "01.2" board version or name of board?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards
@ 2023-01-25 11:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:15 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Document the new ipq5332 SoC/board device tree bindings
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 27063a045bd0..a3568c7d3cc9 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -30,6 +30,7 @@ description: |
> apq8084
> apq8096
> ipq4018
> + ipq5332
> ipq6018
> ipq8074
> mdm9615
> @@ -82,6 +83,7 @@ description: |
> hk10-c2
> idp
> liquid
> + mi01.2
Is "01.2" board version or name of board?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 11:16 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:16 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Document the compatible for IPQ5332 SCM.
Subject:
dt-bindings: firmware: qcom,scm:
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM
@ 2023-01-25 11:16 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:16 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Document the compatible for IPQ5332 SCM.
Subject:
dt-bindings: firmware: qcom,scm:
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 11:17 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:17 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> The IPQ5332 supports eMMC with an SDHCI controller. Add the appropriate
> compatible to the documentation.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
@ 2023-01-25 11:17 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:17 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> The IPQ5332 supports eMMC with an SDHCI controller. Add the appropriate
> compatible to the documentation.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 11:22 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:22 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add initial device tree support for the Qualcomm IPQ5332 SoC and
> MI01.2 board.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
> 3 files changed, 345 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 3e79496292e7..fbd5bc583a9b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> new file mode 100644
> index 000000000000..7984d8f824ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> @@ -0,0 +1,71 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
A bit odd license (accepting GPLv3...), especially that DTSI is only
BSD. Was it really intended?
> +/*
> + * IPQ5332 AP-MI01.2 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5332.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
Just to be clear - you indicated in bindings that "AP" is the foundry
ID. This is correct, right? Then I am not sure if it should be in model
name.
> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
> +
> + aliases {
> + serial0 = &blsp1_uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +};
> +
> +&blsp1_uart0 {
> + pinctrl-0 = <&serial_0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&sdhc {
> + pinctrl-0 = <&sdc_default_state>;
> + pinctrl-names = "default";
> + non-removable;
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32000>;
> +};
> +
> +&xo_board {
> + clock-frequency = <24000000>;
> +};
> +
> +/* PINCTRL */
> +
> +&tlmm {
> + sdc_default_state: sdc-default-state {
> + clk-pins {
> + pins = "gpio13";
> + function = "sdc_clk";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "gpio12";
> + function = "sdc_cmd";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
> + function = "sdc_data";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> new file mode 100644
> index 000000000000..d04244a3cd3a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -0,0 +1,273 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + xo_board: xo-board-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
This is just "2", not hex.
> + };
> + };
> +
> + firmware {
> + scm {
> + compatible = "qcom,scm-ipq5332", "qcom,scm";
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0x40000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + tz: memory@4a600000 {
> + no-map;
> + reg = <0x0 0x4a600000 0x0 0x200000>;
> + };
> + };
> +
> + soc@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,ipq5332-tlmm";
> + reg = <0x01000000 0x300000>;
> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 53>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + serial_0_pins: serial0-state {
> + pins = "gpio18", "gpio19";
> + function = "blsp0_uart0";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +
> + gcc: clock-controller@1800000 {
> + compatible = "qcom,ipq5332-gcc";
> + reg = <0x01800000 0x80000>;
> + #clock-cells = <0x1>;
> + #reset-cells = <0x1>;
> + #power-domain-cells = <1>;
> + clock-names = "xo",
> + "sleep_clk",
> + "pcie_2lane_phy_pipe_clk",
> + "pcie_2lane_phy_pipe_clk_x1",
> + "usb_pcie_wrapper_pipe_clk";
> + clocks = <&xo_board>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>;
> + };
> +
> + sdhc: mmc@7804000 {
> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> +
> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + max-frequency = <192000000>;
> + bus-width = <4>;
Aren't these five properties of the board? Do you fix the exact eMMC
module inside the SoC?
> + status = "disabled";
> + };
> +
> + blsp1_uart0: serial@78af000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078af000 0x200>;
> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
> + reg = <0x0b000000 0x1000>, /* GICD */
> + <0x0b002000 0x1000>, /* GICC */
> + <0x0b001000 0x1000>, /* GICH */
> + <0x0b004000 0x1000>; /* GICV */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + ranges = <0 0x0b00c000 0x3000>;
> +
> + v2m0: v2m@0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x0 0xffd>;
> + msi-controller;
> + };
> +
> + v2m1: v2m@1 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00001000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m2: v2m@2 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00002000 0xffd>;
> + msi-controller;
> + };
> + };
> +
> + timer@b120000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0b120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + frame@b120000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b121000 0x1000>,
> + <0x0b122000 0x1000>;
> + };
> +
> + frame@b123000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b123000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b124000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b124000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b125000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b125000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b126000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b126000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b127000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b127000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b128000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b128000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
Drop blank line.
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
@ 2023-01-25 11:22 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 11:22 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add initial device tree support for the Qualcomm IPQ5332 SoC and
> MI01.2 board.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
> 3 files changed, 345 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 3e79496292e7..fbd5bc583a9b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> new file mode 100644
> index 000000000000..7984d8f824ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> @@ -0,0 +1,71 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
A bit odd license (accepting GPLv3...), especially that DTSI is only
BSD. Was it really intended?
> +/*
> + * IPQ5332 AP-MI01.2 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5332.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
Just to be clear - you indicated in bindings that "AP" is the foundry
ID. This is correct, right? Then I am not sure if it should be in model
name.
> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
> +
> + aliases {
> + serial0 = &blsp1_uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +};
> +
> +&blsp1_uart0 {
> + pinctrl-0 = <&serial_0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&sdhc {
> + pinctrl-0 = <&sdc_default_state>;
> + pinctrl-names = "default";
> + non-removable;
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32000>;
> +};
> +
> +&xo_board {
> + clock-frequency = <24000000>;
> +};
> +
> +/* PINCTRL */
> +
> +&tlmm {
> + sdc_default_state: sdc-default-state {
> + clk-pins {
> + pins = "gpio13";
> + function = "sdc_clk";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "gpio12";
> + function = "sdc_cmd";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
> + function = "sdc_data";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> new file mode 100644
> index 000000000000..d04244a3cd3a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -0,0 +1,273 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + xo_board: xo-board-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
This is just "2", not hex.
> + };
> + };
> +
> + firmware {
> + scm {
> + compatible = "qcom,scm-ipq5332", "qcom,scm";
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0x40000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + tz: memory@4a600000 {
> + no-map;
> + reg = <0x0 0x4a600000 0x0 0x200000>;
> + };
> + };
> +
> + soc@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,ipq5332-tlmm";
> + reg = <0x01000000 0x300000>;
> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 53>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + serial_0_pins: serial0-state {
> + pins = "gpio18", "gpio19";
> + function = "blsp0_uart0";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +
> + gcc: clock-controller@1800000 {
> + compatible = "qcom,ipq5332-gcc";
> + reg = <0x01800000 0x80000>;
> + #clock-cells = <0x1>;
> + #reset-cells = <0x1>;
> + #power-domain-cells = <1>;
> + clock-names = "xo",
> + "sleep_clk",
> + "pcie_2lane_phy_pipe_clk",
> + "pcie_2lane_phy_pipe_clk_x1",
> + "usb_pcie_wrapper_pipe_clk";
> + clocks = <&xo_board>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>;
> + };
> +
> + sdhc: mmc@7804000 {
> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> +
> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + max-frequency = <192000000>;
> + bus-width = <4>;
Aren't these five properties of the board? Do you fix the exact eMMC
module inside the SoC?
> + status = "disabled";
> + };
> +
> + blsp1_uart0: serial@78af000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078af000 0x200>;
> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
> + reg = <0x0b000000 0x1000>, /* GICD */
> + <0x0b002000 0x1000>, /* GICC */
> + <0x0b001000 0x1000>, /* GICH */
> + <0x0b004000 0x1000>; /* GICV */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + ranges = <0 0x0b00c000 0x3000>;
> +
> + v2m0: v2m@0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x0 0xffd>;
> + msi-controller;
> + };
> +
> + v2m1: v2m@1 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00001000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m2: v2m@2 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00002000 0xffd>;
> + msi-controller;
> + };
> + };
> +
> + timer@b120000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0b120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + frame@b120000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b121000 0x1000>,
> + <0x0b122000 0x1000>;
> + };
> +
> + frame@b123000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b123000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b124000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b124000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b125000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b125000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b126000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b126000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b127000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b127000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b128000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b128000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
Drop blank line.
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
2023-01-25 11:10 ` Krzysztof Kozlowski
@ 2023-01-25 15:49 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:40 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add device tree bindings for IPQ5332 TLMM block.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> .../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 ++++++++++++++++++
>> 1 file changed, 134 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..d101ee04b8b7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
> Name matching compatible, please.
Sure, will rename it accordingly.
>
>> @@ -0,0 +1,134 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm IPQ5332 TLMM pin controller
>> +
>> +maintainers:
>> + - Bjorn Andersson <andersson@kernel.org>
>> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> +
>> +description: |
>> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>> +
>> +allOf:
>> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: qcom,ipq5332-tlmm
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts: true
> missing maxItems
>
> Rebase your patches on latest next and use the latest bindings and
> drivers as starting point.
Changes are based on v6.2-rc1. I see the maxItems changes in
linux-next. Will update this in V2.
>> + interrupt-controller: true
>> + "#interrupt-cells": true
>> + gpio-controller: true
>> + "#gpio-cells": true
>> + gpio-ranges: true
>> + wakeup-parent: true
>> +
>> + gpio-reserved-ranges:
>> + minItems: 1
>> + maxItems: 27
>> +
>> + gpio-line-names:
>> + maxItems: 53
> You have 54 GPIOs.
Sorry, GPIO ranges are from 0-52, will update it in all places in V2.
>
>> +
>> +patternProperties:
>> + "-state$":
>> + oneOf:
>> + - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
>> + - patternProperties:
>> + "-pins$":
>> + $ref: "#/$defs/qcom-ipq5332-tlmm-state"
>> + additionalProperties: false
>> +
>> +$defs:
>> + qcom-ipq5332-tlmm-state:
>> + type: object
>> + description:
>> + Pinctrl node's client devices use subnodes for desired pin configuration.
>> + Client device subnodes use below standard properties.
>> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
>> +
>> + properties:
>> + pins:
>> + description:
>> + List of gpio pins affected by the properties specified in this
>> + subnode.
>> + items:
>> + pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
>> + minItems: 1
>> + maxItems: 36
>> +
>> + function:
>> + description:
>> + Specify the alternative function to be configured for the specified
>> + pins.
>> +
>> + enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
> 1. lowercase only
>
> 2. order all these by name
Ack.
>
>
>> + atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
>> + audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
>> + blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
>> + blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
>> + blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
>> + core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
>> + cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
>> + lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
@ 2023-01-25 15:49 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:40 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add device tree bindings for IPQ5332 TLMM block.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> .../pinctrl/qcom,ipq5332-pinctrl.yaml | 134 ++++++++++++++++++
>> 1 file changed, 134 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..d101ee04b8b7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
> Name matching compatible, please.
Sure, will rename it accordingly.
>
>> @@ -0,0 +1,134 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm IPQ5332 TLMM pin controller
>> +
>> +maintainers:
>> + - Bjorn Andersson <andersson@kernel.org>
>> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> +
>> +description: |
>> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>> +
>> +allOf:
>> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: qcom,ipq5332-tlmm
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts: true
> missing maxItems
>
> Rebase your patches on latest next and use the latest bindings and
> drivers as starting point.
Changes are based on v6.2-rc1. I see the maxItems changes in
linux-next. Will update this in V2.
>> + interrupt-controller: true
>> + "#interrupt-cells": true
>> + gpio-controller: true
>> + "#gpio-cells": true
>> + gpio-ranges: true
>> + wakeup-parent: true
>> +
>> + gpio-reserved-ranges:
>> + minItems: 1
>> + maxItems: 27
>> +
>> + gpio-line-names:
>> + maxItems: 53
> You have 54 GPIOs.
Sorry, GPIO ranges are from 0-52, will update it in all places in V2.
>
>> +
>> +patternProperties:
>> + "-state$":
>> + oneOf:
>> + - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
>> + - patternProperties:
>> + "-pins$":
>> + $ref: "#/$defs/qcom-ipq5332-tlmm-state"
>> + additionalProperties: false
>> +
>> +$defs:
>> + qcom-ipq5332-tlmm-state:
>> + type: object
>> + description:
>> + Pinctrl node's client devices use subnodes for desired pin configuration.
>> + Client device subnodes use below standard properties.
>> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
>> +
>> + properties:
>> + pins:
>> + description:
>> + List of gpio pins affected by the properties specified in this
>> + subnode.
>> + items:
>> + pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
>> + minItems: 1
>> + maxItems: 36
>> +
>> + function:
>> + description:
>> + Specify the alternative function to be configured for the specified
>> + pins.
>> +
>> + enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
> 1. lowercase only
>
> 2. order all these by name
Ack.
>
>
>> + atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
>> + audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
>> + blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
>> + blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
>> + blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
>> + core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
>> + cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
>> + lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC
2023-01-25 11:13 ` Krzysztof Kozlowski
@ 2023-01-25 15:50 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:50 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:43 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add binding for the Qualcomm IPQ5332 Global Clock Controller.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
> Thank you for your patch. There is something to discuss/improve.
Thanks for taking time to review the patch.
>
>> + clocks:
>> + items:
>> + - description: Board XO clock source
>> + - description: Sleep clock source
>> + - description: PCIE 2lane PHY pipe clock source
>> + - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
>> + - description: USB PCIE wrapper pipe clock source
>> +
>> + clock-names:
>> + items:
>> + - const: xo
>> + - const: sleep_clk
>> + - const: pcie_2lane_phy_pipe_clk
>> + - const: pcie_2lane_phy_pipe_clk_x1
>> + - const: usb_pcie_wrapper_pipe_clk
>> +
>> +required:
>> + - compatible
> clocks are required
Ack.
>
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + clock-controller@1800000 {
>> + compatible = "qcom,ipq5332-gcc";
>> + reg = <0x01800000 0x80000>;
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> + #reset-cells = <1>;
>> + };
>> +...
>> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5332.h b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
>> new file mode 100644
>> index 000000000000..a305c648b724
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
> Filename should match bindings/compatible.
Ack.
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC
@ 2023-01-25 15:50 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:50 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:43 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add binding for the Qualcomm IPQ5332 Global Clock Controller.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
> Thank you for your patch. There is something to discuss/improve.
Thanks for taking time to review the patch.
>
>> + clocks:
>> + items:
>> + - description: Board XO clock source
>> + - description: Sleep clock source
>> + - description: PCIE 2lane PHY pipe clock source
>> + - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
>> + - description: USB PCIE wrapper pipe clock source
>> +
>> + clock-names:
>> + items:
>> + - const: xo
>> + - const: sleep_clk
>> + - const: pcie_2lane_phy_pipe_clk
>> + - const: pcie_2lane_phy_pipe_clk_x1
>> + - const: usb_pcie_wrapper_pipe_clk
>> +
>> +required:
>> + - compatible
> clocks are required
Ack.
>
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + clock-controller@1800000 {
>> + compatible = "qcom,ipq5332-gcc";
>> + reg = <0x01800000 0x80000>;
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> + #reset-cells = <1>;
>> + };
>> +...
>> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5332.h b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
>> new file mode 100644
>> index 000000000000..a305c648b724
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/qcom,gcc-ipq5332.h
> Filename should match bindings/compatible.
Ack.
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
2023-01-25 11:14 ` Krzysztof Kozlowski
@ 2023-01-25 15:53 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:53 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:44 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add support for the global clock controller found on IPQ5332 SoC.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> drivers/clk/qcom/Kconfig | 7 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/gcc-ipq5332.c | 3954 ++++++++++++++++++++++++++++++++
>> 3 files changed, 3962 insertions(+)
>> create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 70d43f0a8919..1d300c89ecfc 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -141,6 +141,13 @@ config IPQ_GCC_4019
>> Say Y if you want to use peripheral devices such as UART, SPI,
>> i2c, USB, SD/eMMC, etc.
>>
>> +config IPQ_GCC_5332
>> + tristate "IPQ5332 Global Clock Controller"
> depends on ARM64 || COMPILE_TEST
Ack.
>
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
@ 2023-01-25 15:53 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:53 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:44 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add support for the global clock controller found on IPQ5332 SoC.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> drivers/clk/qcom/Kconfig | 7 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/gcc-ipq5332.c | 3954 ++++++++++++++++++++++++++++++++
>> 3 files changed, 3962 insertions(+)
>> create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 70d43f0a8919..1d300c89ecfc 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -141,6 +141,13 @@ config IPQ_GCC_4019
>> Say Y if you want to use peripheral devices such as UART, SPI,
>> i2c, USB, SD/eMMC, etc.
>>
>> +config IPQ_GCC_5332
>> + tristate "IPQ5332 Global Clock Controller"
> depends on ARM64 || COMPILE_TEST
Ack.
>
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards
2023-01-25 11:15 ` Krzysztof Kozlowski
@ 2023-01-25 15:55 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:55 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:45 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Document the new ipq5332 SoC/board device tree bindings
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
>> index 27063a045bd0..a3568c7d3cc9 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
>> @@ -30,6 +30,7 @@ description: |
>> apq8084
>> apq8096
>> ipq4018
>> + ipq5332
>> ipq6018
>> ipq8074
>> mdm9615
>> @@ -82,6 +83,7 @@ description: |
>> hk10-c2
>> idp
>> liquid
>> + mi01.2
> Is "01.2" board version or name of board?
It is the name of the board, not the version.
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards
@ 2023-01-25 15:55 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:55 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:45 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Document the new ipq5332 SoC/board device tree bindings
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
>> index 27063a045bd0..a3568c7d3cc9 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
>> @@ -30,6 +30,7 @@ description: |
>> apq8084
>> apq8096
>> ipq4018
>> + ipq5332
>> ipq6018
>> ipq8074
>> mdm9615
>> @@ -82,6 +83,7 @@ description: |
>> hk10-c2
>> idp
>> liquid
>> + mi01.2
> Is "01.2" board version or name of board?
It is the name of the board, not the version.
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM
2023-01-25 11:16 ` Krzysztof Kozlowski
@ 2023-01-25 15:55 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:55 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:46 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Document the compatible for IPQ5332 SCM.
> Subject:
> dt-bindings: firmware: qcom,scm:
Thanks for the review, will fix it in V2.
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM
@ 2023-01-25 15:55 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 15:55 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:46 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Document the compatible for IPQ5332 SCM.
> Subject:
> dt-bindings: firmware: qcom,scm:
Thanks for the review, will fix it in V2.
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
>
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
2023-01-25 11:22 ` Krzysztof Kozlowski
@ 2023-01-25 16:05 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 16:05 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:52 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add initial device tree support for the Qualcomm IPQ5332 SoC and
>> MI01.2 board.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
>> 3 files changed, 345 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 3e79496292e7..fbd5bc583a9b 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> new file mode 100644
>> index 000000000000..7984d8f824ce
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> @@ -0,0 +1,71 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> A bit odd license (accepting GPLv3...), especially that DTSI is only
> BSD. Was it really intended?
No, it is not intentional. Will change it to BSD-3-Clause in V2.
>
>> +/*
>> + * IPQ5332 AP-MI01.2 board device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5332.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
> Just to be clear - you indicated in bindings that "AP" is the foundry
> ID. This is correct, right? Then I am not sure if it should be in model
> name.
Okay, will change the model to "Qualcomm Technologies, Inc. IPQ5332
MI01.2". I see all other IPQ DTS carries the same naming convention. May
be those also should be fixed.
>
>> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
>> +
>> + aliases {
>> + serial0 = &blsp1_uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0";
>> + };
>> +};
>> +
>> +&blsp1_uart0 {
>> + pinctrl-0 = <&serial_0_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +};
>> +
>> +&sdhc {
>> + pinctrl-0 = <&sdc_default_state>;
>> + pinctrl-names = "default";
>> + non-removable;
>> + status = "okay";
>> +};
>> +
>> +&sleep_clk {
>> + clock-frequency = <32000>;
>> +};
>> +
>> +&xo_board {
>> + clock-frequency = <24000000>;
>> +};
>> +
>> +/* PINCTRL */
>> +
>> +&tlmm {
>> + sdc_default_state: sdc-default-state {
>> + clk-pins {
>> + pins = "gpio13";
>> + function = "sdc_clk";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "gpio12";
>> + function = "sdc_cmd";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>> + function = "sdc_data";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> new file mode 100644
>> index 000000000000..d04244a3cd3a
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -0,0 +1,273 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * IPQ5332 device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + clocks {
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> +
>> + xo_board: xo-board-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x1>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU2: cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x2>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU3: cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x3>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + cache-level = <0x2>;
> This is just "2", not hex.
Ack.
>
>> + };
>> + };
>> +
>> + firmware {
>> + scm {
>> + compatible = "qcom,scm-ipq5332", "qcom,scm";
>> + };
>> + };
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0x0 0x40000000 0x0 0x0>;
>> + };
>> +
>> + pmu {
>> + compatible = "arm,cortex-a53-pmu";
>> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + tz: memory@4a600000 {
>> + no-map;
>> + reg = <0x0 0x4a600000 0x0 0x200000>;
>> + };
>> + };
>> +
>> + soc@0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0 0xffffffff>;
>> + compatible = "simple-bus";
>> +
>> + tlmm: pinctrl@1000000 {
>> + compatible = "qcom,ipq5332-tlmm";
>> + reg = <0x01000000 0x300000>;
>> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 53>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> +
>> + serial_0_pins: serial0-state {
>> + pins = "gpio18", "gpio19";
>> + function = "blsp0_uart0";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +
>> + gcc: clock-controller@1800000 {
>> + compatible = "qcom,ipq5332-gcc";
>> + reg = <0x01800000 0x80000>;
>> + #clock-cells = <0x1>;
>> + #reset-cells = <0x1>;
>> + #power-domain-cells = <1>;
>> + clock-names = "xo",
>> + "sleep_clk",
>> + "pcie_2lane_phy_pipe_clk",
>> + "pcie_2lane_phy_pipe_clk_x1",
>> + "usb_pcie_wrapper_pipe_clk";
>> + clocks = <&xo_board>,
>> + <&sleep_clk>,
>> + <0>,
>> + <0>,
>> + <0>;
>> + };
>> +
>> + sdhc: mmc@7804000 {
>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>> +
>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "core", "xo";
>> + mmc-ddr-1_8v;
>> + mmc-hs200-1_8v;
>> + max-frequency = <192000000>;
>> + bus-width = <4>;
> Aren't these five properties of the board? Do you fix the exact eMMC
> module inside the SoC?
Okay, will cross check this and update it.
>
>> + status = "disabled";
>> + };
>> +
>> + blsp1_uart0: serial@78af000 {
>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> + reg = <0x078af000 0x200>;
>> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + status = "disabled";
>> + };
>> +
>> + intc: interrupt-controller@b000000 {
>> + compatible = "qcom,msm-qgic2";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + interrupt-controller;
>> + #interrupt-cells = <0x3>;
>> + reg = <0x0b000000 0x1000>, /* GICD */
>> + <0x0b002000 0x1000>, /* GICC */
>> + <0x0b001000 0x1000>, /* GICH */
>> + <0x0b004000 0x1000>; /* GICV */
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + ranges = <0 0x0b00c000 0x3000>;
>> +
>> + v2m0: v2m@0 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x0 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m1: v2m@1 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00001000 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m2: v2m@2 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00002000 0xffd>;
>> + msi-controller;
>> + };
>> + };
>> +
>> + timer@b120000 {
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0b120000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + frame@b120000 {
>> + frame-number = <0>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b121000 0x1000>,
>> + <0x0b122000 0x1000>;
>> + };
>> +
>> + frame@b123000 {
>> + frame-number = <1>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b123000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b124000 {
>> + frame-number = <2>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b124000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b125000 {
>> + frame-number = <3>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b125000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b126000 {
>> + frame-number = <4>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b126000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b127000 {
>> + frame-number = <5>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b127000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b128000 {
>> + frame-number = <6>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b128000 0x1000>;
>> + status = "disabled";
>> + };
>> + };
>> +
> Drop blank line.
Ack.
>
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +};
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
@ 2023-01-25 16:05 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 16:05 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 4:52 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add initial device tree support for the Qualcomm IPQ5332 SoC and
>> MI01.2 board.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
>> 3 files changed, 345 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 3e79496292e7..fbd5bc583a9b 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> new file mode 100644
>> index 000000000000..7984d8f824ce
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> @@ -0,0 +1,71 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> A bit odd license (accepting GPLv3...), especially that DTSI is only
> BSD. Was it really intended?
No, it is not intentional. Will change it to BSD-3-Clause in V2.
>
>> +/*
>> + * IPQ5332 AP-MI01.2 board device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5332.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
> Just to be clear - you indicated in bindings that "AP" is the foundry
> ID. This is correct, right? Then I am not sure if it should be in model
> name.
Okay, will change the model to "Qualcomm Technologies, Inc. IPQ5332
MI01.2". I see all other IPQ DTS carries the same naming convention. May
be those also should be fixed.
>
>> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
>> +
>> + aliases {
>> + serial0 = &blsp1_uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0";
>> + };
>> +};
>> +
>> +&blsp1_uart0 {
>> + pinctrl-0 = <&serial_0_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +};
>> +
>> +&sdhc {
>> + pinctrl-0 = <&sdc_default_state>;
>> + pinctrl-names = "default";
>> + non-removable;
>> + status = "okay";
>> +};
>> +
>> +&sleep_clk {
>> + clock-frequency = <32000>;
>> +};
>> +
>> +&xo_board {
>> + clock-frequency = <24000000>;
>> +};
>> +
>> +/* PINCTRL */
>> +
>> +&tlmm {
>> + sdc_default_state: sdc-default-state {
>> + clk-pins {
>> + pins = "gpio13";
>> + function = "sdc_clk";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "gpio12";
>> + function = "sdc_cmd";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>> + function = "sdc_data";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> new file mode 100644
>> index 000000000000..d04244a3cd3a
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -0,0 +1,273 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * IPQ5332 device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + clocks {
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> +
>> + xo_board: xo-board-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x1>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU2: cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x2>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU3: cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x3>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + cache-level = <0x2>;
> This is just "2", not hex.
Ack.
>
>> + };
>> + };
>> +
>> + firmware {
>> + scm {
>> + compatible = "qcom,scm-ipq5332", "qcom,scm";
>> + };
>> + };
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0x0 0x40000000 0x0 0x0>;
>> + };
>> +
>> + pmu {
>> + compatible = "arm,cortex-a53-pmu";
>> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + tz: memory@4a600000 {
>> + no-map;
>> + reg = <0x0 0x4a600000 0x0 0x200000>;
>> + };
>> + };
>> +
>> + soc@0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0 0xffffffff>;
>> + compatible = "simple-bus";
>> +
>> + tlmm: pinctrl@1000000 {
>> + compatible = "qcom,ipq5332-tlmm";
>> + reg = <0x01000000 0x300000>;
>> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 53>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> +
>> + serial_0_pins: serial0-state {
>> + pins = "gpio18", "gpio19";
>> + function = "blsp0_uart0";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +
>> + gcc: clock-controller@1800000 {
>> + compatible = "qcom,ipq5332-gcc";
>> + reg = <0x01800000 0x80000>;
>> + #clock-cells = <0x1>;
>> + #reset-cells = <0x1>;
>> + #power-domain-cells = <1>;
>> + clock-names = "xo",
>> + "sleep_clk",
>> + "pcie_2lane_phy_pipe_clk",
>> + "pcie_2lane_phy_pipe_clk_x1",
>> + "usb_pcie_wrapper_pipe_clk";
>> + clocks = <&xo_board>,
>> + <&sleep_clk>,
>> + <0>,
>> + <0>,
>> + <0>;
>> + };
>> +
>> + sdhc: mmc@7804000 {
>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>> +
>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "core", "xo";
>> + mmc-ddr-1_8v;
>> + mmc-hs200-1_8v;
>> + max-frequency = <192000000>;
>> + bus-width = <4>;
> Aren't these five properties of the board? Do you fix the exact eMMC
> module inside the SoC?
Okay, will cross check this and update it.
>
>> + status = "disabled";
>> + };
>> +
>> + blsp1_uart0: serial@78af000 {
>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> + reg = <0x078af000 0x200>;
>> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + status = "disabled";
>> + };
>> +
>> + intc: interrupt-controller@b000000 {
>> + compatible = "qcom,msm-qgic2";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + interrupt-controller;
>> + #interrupt-cells = <0x3>;
>> + reg = <0x0b000000 0x1000>, /* GICD */
>> + <0x0b002000 0x1000>, /* GICC */
>> + <0x0b001000 0x1000>, /* GICH */
>> + <0x0b004000 0x1000>; /* GICV */
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + ranges = <0 0x0b00c000 0x3000>;
>> +
>> + v2m0: v2m@0 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x0 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m1: v2m@1 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00001000 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m2: v2m@2 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00002000 0xffd>;
>> + msi-controller;
>> + };
>> + };
>> +
>> + timer@b120000 {
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0b120000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + frame@b120000 {
>> + frame-number = <0>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b121000 0x1000>,
>> + <0x0b122000 0x1000>;
>> + };
>> +
>> + frame@b123000 {
>> + frame-number = <1>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b123000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b124000 {
>> + frame-number = <2>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b124000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b125000 {
>> + frame-number = <3>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b125000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b126000 {
>> + frame-number = <4>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b126000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b127000 {
>> + frame-number = <5>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b127000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b128000 {
>> + frame-number = <6>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b128000 0x1000>;
>> + status = "disabled";
>> + };
>> + };
>> +
> Drop blank line.
Ack.
>
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +};
> Best regards,
> Krzysztof
Thanks,
Kathiravan T.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
2023-01-25 15:49 ` Kathiravan Thirumoorthy
@ 2023-01-25 16:20 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 16:20 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 16:49, Kathiravan Thirumoorthy wrote:
>>
>>> @@ -0,0 +1,134 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Qualcomm IPQ5332 TLMM pin controller
>>> +
>>> +maintainers:
>>> + - Bjorn Andersson <andersson@kernel.org>
>>> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> +
>>> +description: |
>>> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>>> +
>>> +allOf:
>>> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>> +
>>> +properties:
>>> + compatible:
>>> + const: qcom,ipq5332-tlmm
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + interrupts: true
>> missing maxItems
>>
>> Rebase your patches on latest next and use the latest bindings and
>> drivers as starting point.
>
>
> Changes are based on v6.2-rc1. I see the maxItems changes in
> linux-next. Will update this in V2.
Your patches cannot be based on v6.2-rc1. They won't even apply. You
miss entire development of last month.
>
>
>>> + interrupt-controller: true
>>> + "#interrupt-cells": true
>>> + gpio-controller: true
>>> + "#gpio-cells": true
>>> + gpio-ranges: true
>>> + wakeup-parent: true
>>> +
>>> + gpio-reserved-ranges:
>>> + minItems: 1
>>> + maxItems: 27
>>> +
>>> + gpio-line-names:
>>> + maxItems: 53
>> You have 54 GPIOs.
>
>
> Sorry, GPIO ranges are from 0-52, will update it in all places in V2.
Ah, then the gpio pattern needs a fix.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
@ 2023-01-25 16:20 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-25 16:20 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25/01/2023 16:49, Kathiravan Thirumoorthy wrote:
>>
>>> @@ -0,0 +1,134 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Qualcomm IPQ5332 TLMM pin controller
>>> +
>>> +maintainers:
>>> + - Bjorn Andersson <andersson@kernel.org>
>>> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> +
>>> +description: |
>>> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>>> +
>>> +allOf:
>>> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>> +
>>> +properties:
>>> + compatible:
>>> + const: qcom,ipq5332-tlmm
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + interrupts: true
>> missing maxItems
>>
>> Rebase your patches on latest next and use the latest bindings and
>> drivers as starting point.
>
>
> Changes are based on v6.2-rc1. I see the maxItems changes in
> linux-next. Will update this in V2.
Your patches cannot be based on v6.2-rc1. They won't even apply. You
miss entire development of last month.
>
>
>>> + interrupt-controller: true
>>> + "#interrupt-cells": true
>>> + gpio-controller: true
>>> + "#gpio-cells": true
>>> + gpio-ranges: true
>>> + wakeup-parent: true
>>> +
>>> + gpio-reserved-ranges:
>>> + minItems: 1
>>> + maxItems: 27
>>> +
>>> + gpio-line-names:
>>> + maxItems: 53
>> You have 54 GPIOs.
>
>
> Sorry, GPIO ranges are from 0-52, will update it in all places in V2.
Ah, then the gpio pattern needs a fix.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
2023-01-25 16:20 ` Krzysztof Kozlowski
@ 2023-01-25 16:38 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 16:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 9:50 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 16:49, Kathiravan Thirumoorthy wrote:
>>>> @@ -0,0 +1,134 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Qualcomm IPQ5332 TLMM pin controller
>>>> +
>>>> +maintainers:
>>>> + - Bjorn Andersson <andersson@kernel.org>
>>>> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>> +
>>>> +description: |
>>>> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>>>> +
>>>> +allOf:
>>>> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: qcom,ipq5332-tlmm
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + interrupts: true
>>> missing maxItems
>>>
>>> Rebase your patches on latest next and use the latest bindings and
>>> drivers as starting point.
>>
>> Changes are based on v6.2-rc1. I see the maxItems changes in
>> linux-next. Will update this in V2.
> Your patches cannot be based on v6.2-rc1. They won't even apply. You
> miss entire development of last month.
Hmmm, Will use linux-next/master as base hereafter.
>>
>>>> + interrupt-controller: true
>>>> + "#interrupt-cells": true
>>>> + gpio-controller: true
>>>> + "#gpio-cells": true
>>>> + gpio-ranges: true
>>>> + wakeup-parent: true
>>>> +
>>>> + gpio-reserved-ranges:
>>>> + minItems: 1
>>>> + maxItems: 27
>>>> +
>>>> + gpio-line-names:
>>>> + maxItems: 53
>>> You have 54 GPIOs.
>>
>> Sorry, GPIO ranges are from 0-52, will update it in all places in V2.
> Ah, then the gpio pattern needs a fix.
Yup, will take care of that as well in V2.
>
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
@ 2023-01-25 16:38 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-25 16:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/25/2023 9:50 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 16:49, Kathiravan Thirumoorthy wrote:
>>>> @@ -0,0 +1,134 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Qualcomm IPQ5332 TLMM pin controller
>>>> +
>>>> +maintainers:
>>>> + - Bjorn Andersson <andersson@kernel.org>
>>>> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>> +
>>>> +description: |
>>>> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>>>> +
>>>> +allOf:
>>>> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: qcom,ipq5332-tlmm
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + interrupts: true
>>> missing maxItems
>>>
>>> Rebase your patches on latest next and use the latest bindings and
>>> drivers as starting point.
>>
>> Changes are based on v6.2-rc1. I see the maxItems changes in
>> linux-next. Will update this in V2.
> Your patches cannot be based on v6.2-rc1. They won't even apply. You
> miss entire development of last month.
Hmmm, Will use linux-next/master as base hereafter.
>>
>>>> + interrupt-controller: true
>>>> + "#interrupt-cells": true
>>>> + gpio-controller: true
>>>> + "#gpio-cells": true
>>>> + gpio-ranges: true
>>>> + wakeup-parent: true
>>>> +
>>>> + gpio-reserved-ranges:
>>>> + minItems: 1
>>>> + maxItems: 27
>>>> +
>>>> + gpio-line-names:
>>>> + maxItems: 53
>>> You have 54 GPIOs.
>>
>> Sorry, GPIO ranges are from 0-52, will update it in all places in V2.
> Ah, then the gpio pattern needs a fix.
Yup, will take care of that as well in V2.
>
>
> Best regards,
> Krzysztof
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 03/10] clk: qcom: Add STROMER PLUS PLL type for IPQ5332
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 20:35 ` Stephen Boyd
-1 siblings, 0 replies; 67+ messages in thread
From: Stephen Boyd @ 2023-01-25 20:35 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, arnd, bhupesh.sharma,
broonie, catalin.marinas, devicetree, dmitry.baryshkov,
konrad.dybcio, krzysztof.kozlowski+dt, linus.walleij,
linux-arm-kernel, linux-arm-msm, linux-clk, linux-gpio,
linux-kernel, linux-mmc, marcel.ziswiler, mturquette, nfraprado,
quic_gurus, robh+dt, robimarko, shawnguo, ulf.hansson, will
Cc: Kathiravan T
Quoting Kathiravan Thirumoorthy (2023-01-25 02:45:13)
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add the support for stromer plus pll, which is found on the IPQ5332
> SoCs. Programming sequence is same as the stromer pll, so we can re-use
> the same.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
I'm amazed that we need so many different register layouts for PLLs. Was
it really never standardized? So sad.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 03/10] clk: qcom: Add STROMER PLUS PLL type for IPQ5332
@ 2023-01-25 20:35 ` Stephen Boyd
0 siblings, 0 replies; 67+ messages in thread
From: Stephen Boyd @ 2023-01-25 20:35 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, arnd, bhupesh.sharma,
broonie, catalin.marinas, devicetree, dmitry.baryshkov,
konrad.dybcio, krzysztof.kozlowski+dt, linus.walleij,
linux-arm-kernel, linux-arm-msm, linux-clk, linux-gpio,
linux-kernel, linux-mmc, marcel.ziswiler, mturquette, nfraprado,
quic_gurus, robh+dt, robimarko, shawnguo, ulf.hansson, will
Cc: Kathiravan T
Quoting Kathiravan Thirumoorthy (2023-01-25 02:45:13)
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add the support for stromer plus pll, which is found on the IPQ5332
> SoCs. Programming sequence is same as the stromer pll, so we can re-use
> the same.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
I'm amazed that we need so many different register layouts for PLLs. Was
it really never standardized? So sad.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
2023-01-25 10:45 ` [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC Kathiravan Thirumoorthy
@ 2023-01-25 20:54 ` Stephen Boyd
2023-01-25 20:54 ` Stephen Boyd
1 sibling, 0 replies; 67+ messages in thread
From: Stephen Boyd @ 2023-01-25 20:54 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, arnd, bhupesh.sharma,
broonie, catalin.marinas, devicetree, dmitry.baryshkov,
konrad.dybcio, krzysztof.kozlowski+dt, linus.walleij,
linux-arm-kernel, linux-arm-msm, linux-clk, linux-gpio,
linux-kernel, linux-mmc, marcel.ziswiler, mturquette, nfraprado,
quic_gurus, robh+dt, robimarko, shawnguo, ulf.hansson, will
Cc: Kathiravan T
Quoting Kathiravan Thirumoorthy (2023-01-25 02:45:15)
> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> new file mode 100644
> index 000000000000..8351096a4d32
> --- /dev/null
> +++ b/drivers/clk/qcom/gcc-ipq5332.c
> @@ -0,0 +1,3954 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
[...]
> +
> +static const struct freq_tbl ftbl_gcc_pcnoc_bfdcd_clk_src[] = {
> + F(24000000, P_XO, 1, 0, 0),
> + F(50000000, P_GPLL0_OUT_MAIN, 16, 0, 0),
> + F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
> + { }
> +};
> +
> +static struct clk_rcg2 gcc_pcnoc_bfdcd_clk_src = {
> + .cmd_rcgr = 0x31004,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = gcc_parent_map_0,
> + .freq_tbl = ftbl_gcc_pcnoc_bfdcd_clk_src,
> + .clkr.hw.init = &(const struct clk_init_data){
> + .name = "gcc_pcnoc_bfdcd_clk_src",
> + .parent_data = gcc_parent_data_0,
> + .num_parents = ARRAY_SIZE(gcc_parent_data_0),
> + .ops = &clk_rcg2_ops,
> + .flags = CLK_IS_CRITICAL,
Why not just turn these clks on in probe and never register them with
the framework? That saves some memory for clks that there is no desire
to control from linux. This is an RCG, so in theory the frequency can
change, but does it really? Usually bus clks are controlled by the
interconnect driver.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
@ 2023-01-25 20:54 ` Stephen Boyd
0 siblings, 0 replies; 67+ messages in thread
From: Stephen Boyd @ 2023-01-25 20:54 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, arnd, bhupesh.sharma,
broonie, catalin.marinas, devicetree, dmitry.baryshkov,
konrad.dybcio, krzysztof.kozlowski+dt, linus.walleij,
linux-arm-kernel, linux-arm-msm, linux-clk, linux-gpio,
linux-kernel, linux-mmc, marcel.ziswiler, mturquette, nfraprado,
quic_gurus, robh+dt, robimarko, shawnguo, ulf.hansson, will
Cc: Kathiravan T
Quoting Kathiravan Thirumoorthy (2023-01-25 02:45:15)
> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> new file mode 100644
> index 000000000000..8351096a4d32
> --- /dev/null
> +++ b/drivers/clk/qcom/gcc-ipq5332.c
> @@ -0,0 +1,3954 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
[...]
> +
> +static const struct freq_tbl ftbl_gcc_pcnoc_bfdcd_clk_src[] = {
> + F(24000000, P_XO, 1, 0, 0),
> + F(50000000, P_GPLL0_OUT_MAIN, 16, 0, 0),
> + F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
> + { }
> +};
> +
> +static struct clk_rcg2 gcc_pcnoc_bfdcd_clk_src = {
> + .cmd_rcgr = 0x31004,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = gcc_parent_map_0,
> + .freq_tbl = ftbl_gcc_pcnoc_bfdcd_clk_src,
> + .clkr.hw.init = &(const struct clk_init_data){
> + .name = "gcc_pcnoc_bfdcd_clk_src",
> + .parent_data = gcc_parent_data_0,
> + .num_parents = ARRAY_SIZE(gcc_parent_data_0),
> + .ops = &clk_rcg2_ops,
> + .flags = CLK_IS_CRITICAL,
Why not just turn these clks on in probe and never register them with
the framework? That saves some memory for clks that there is no desire
to control from linux. This is an RCG, so in theory the frequency can
change, but does it really? Usually bus clks are controlled by the
interconnect driver.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-25 21:59 ` Konrad Dybcio
-1 siblings, 0 replies; 67+ messages in thread
From: Konrad Dybcio @ 2023-01-25 21:59 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25.01.2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add initial device tree support for the Qualcomm IPQ5332 SoC and
> MI01.2 board.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
> 3 files changed, 345 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 3e79496292e7..fbd5bc583a9b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> new file mode 100644
> index 000000000000..7984d8f824ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> @@ -0,0 +1,71 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * IPQ5332 AP-MI01.2 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5332.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
> +
> + aliases {
> + serial0 = &blsp1_uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +};
> +
> +&blsp1_uart0 {
> + pinctrl-0 = <&serial_0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&sdhc {
> + pinctrl-0 = <&sdc_default_state>;
> + pinctrl-names = "default";
> + non-removable;
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32000>;
> +};
> +
> +&xo_board {
> + clock-frequency = <24000000>;
> +};
> +
> +/* PINCTRL */
> +
> +&tlmm {
> + sdc_default_state: sdc-default-state {
> + clk-pins {
> + pins = "gpio13";
> + function = "sdc_clk";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "gpio12";
> + function = "sdc_cmd";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
> + function = "sdc_data";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> new file mode 100644
> index 000000000000..d04244a3cd3a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -0,0 +1,273 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + xo_board: xo-board-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
> + };
> + };
> +
> + firmware {
> + scm {
> + compatible = "qcom,scm-ipq5332", "qcom,scm";
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0x40000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + tz: memory@4a600000 {
memory@ is discouraged, the node name should be somewhat
descriptive of what lies in this reserved region. On the
other hand, tz: sounds like a label to a trust zone device
of some kind. I propose:
tz_mem: tz@4a600000 {
instead.
> + no-map;
> + reg = <0x0 0x4a600000 0x0 0x200000>;
> + };
> + };
> +
> + soc@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
Move compatible first, please.
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,ipq5332-tlmm";
> + reg = <0x01000000 0x300000>;
> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 53>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + serial_0_pins: serial0-state {
You may be interested in having a suspend state for this
one, so you may wish to rename this futureproofing-ly to
serial0-active-state.
> + pins = "gpio18", "gpio19";
> + function = "blsp0_uart0";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +
> + gcc: clock-controller@1800000 {
> + compatible = "qcom,ipq5332-gcc";
> + reg = <0x01800000 0x80000>;
> + #clock-cells = <0x1>;
> + #reset-cells = <0x1>;
Decimal values for -cells, please.
> + #power-domain-cells = <1>;
> + clock-names = "xo",
> + "sleep_clk",
> + "pcie_2lane_phy_pipe_clk",
> + "pcie_2lane_phy_pipe_clk_x1",
> + "usb_pcie_wrapper_pipe_clk";
> + clocks = <&xo_board>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>;
> + };
> +
> + sdhc: mmc@7804000 {
> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> +
> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + max-frequency = <192000000>;
As Krzysztof pointed out, this one should go.
> + bus-width = <4>;
Oh that's interesting.. a 4-wide bus for eMMC?
> + status = "disabled";
> + };
> +
> + blsp1_uart0: serial@78af000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078af000 0x200>;
> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + #address-cells = <1>;
> + #size-cells = <1>;
Please move these two above ranges..
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
Decimal value, please.
> + reg = <0x0b000000 0x1000>, /* GICD */
> + <0x0b002000 0x1000>, /* GICC */
> + <0x0b001000 0x1000>, /* GICH */
> + <0x0b004000 0x1000>; /* GICV */
..and reg just below compatible...
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
..and interrupts just below reg, please.
> + ranges = <0 0x0b00c000 0x3000>;
> +
> + v2m0: v2m@0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x0 0xffd>;
Please pad the reg for consistency.
> + msi-controller;
> + };
> +
> + v2m1: v2m@1 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00001000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m2: v2m@2 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00002000 0xffd>;
> + msi-controller;
> + };
> + };
> +
> + timer@b120000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0b120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + frame@b120000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b121000 0x1000>,
> + <0x0b122000 0x1000>;
reg
interrupts
frame-number
would be more consistent with most other nodes.
> + };
> +
> + frame@b123000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b123000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b124000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b124000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b125000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b125000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b126000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b126000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b127000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b127000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b128000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b128000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
The indentation seems off here.
Konrad
> + };
> +};
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
@ 2023-01-25 21:59 ` Konrad Dybcio
0 siblings, 0 replies; 67+ messages in thread
From: Konrad Dybcio @ 2023-01-25 21:59 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, agross, andersson, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 25.01.2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> Add initial device tree support for the Qualcomm IPQ5332 SoC and
> MI01.2 board.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
> 3 files changed, 345 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 3e79496292e7..fbd5bc583a9b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> new file mode 100644
> index 000000000000..7984d8f824ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> @@ -0,0 +1,71 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * IPQ5332 AP-MI01.2 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5332.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
> +
> + aliases {
> + serial0 = &blsp1_uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +};
> +
> +&blsp1_uart0 {
> + pinctrl-0 = <&serial_0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&sdhc {
> + pinctrl-0 = <&sdc_default_state>;
> + pinctrl-names = "default";
> + non-removable;
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32000>;
> +};
> +
> +&xo_board {
> + clock-frequency = <24000000>;
> +};
> +
> +/* PINCTRL */
> +
> +&tlmm {
> + sdc_default_state: sdc-default-state {
> + clk-pins {
> + pins = "gpio13";
> + function = "sdc_clk";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "gpio12";
> + function = "sdc_cmd";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
> + function = "sdc_data";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> new file mode 100644
> index 000000000000..d04244a3cd3a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -0,0 +1,273 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + xo_board: xo-board-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
> + };
> + };
> +
> + firmware {
> + scm {
> + compatible = "qcom,scm-ipq5332", "qcom,scm";
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0x40000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + tz: memory@4a600000 {
memory@ is discouraged, the node name should be somewhat
descriptive of what lies in this reserved region. On the
other hand, tz: sounds like a label to a trust zone device
of some kind. I propose:
tz_mem: tz@4a600000 {
instead.
> + no-map;
> + reg = <0x0 0x4a600000 0x0 0x200000>;
> + };
> + };
> +
> + soc@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
Move compatible first, please.
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,ipq5332-tlmm";
> + reg = <0x01000000 0x300000>;
> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 53>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + serial_0_pins: serial0-state {
You may be interested in having a suspend state for this
one, so you may wish to rename this futureproofing-ly to
serial0-active-state.
> + pins = "gpio18", "gpio19";
> + function = "blsp0_uart0";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +
> + gcc: clock-controller@1800000 {
> + compatible = "qcom,ipq5332-gcc";
> + reg = <0x01800000 0x80000>;
> + #clock-cells = <0x1>;
> + #reset-cells = <0x1>;
Decimal values for -cells, please.
> + #power-domain-cells = <1>;
> + clock-names = "xo",
> + "sleep_clk",
> + "pcie_2lane_phy_pipe_clk",
> + "pcie_2lane_phy_pipe_clk_x1",
> + "usb_pcie_wrapper_pipe_clk";
> + clocks = <&xo_board>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>;
> + };
> +
> + sdhc: mmc@7804000 {
> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> +
> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + max-frequency = <192000000>;
As Krzysztof pointed out, this one should go.
> + bus-width = <4>;
Oh that's interesting.. a 4-wide bus for eMMC?
> + status = "disabled";
> + };
> +
> + blsp1_uart0: serial@78af000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078af000 0x200>;
> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + #address-cells = <1>;
> + #size-cells = <1>;
Please move these two above ranges..
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
Decimal value, please.
> + reg = <0x0b000000 0x1000>, /* GICD */
> + <0x0b002000 0x1000>, /* GICC */
> + <0x0b001000 0x1000>, /* GICH */
> + <0x0b004000 0x1000>; /* GICV */
..and reg just below compatible...
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
..and interrupts just below reg, please.
> + ranges = <0 0x0b00c000 0x3000>;
> +
> + v2m0: v2m@0 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x0 0xffd>;
Please pad the reg for consistency.
> + msi-controller;
> + };
> +
> + v2m1: v2m@1 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00001000 0xffd>;
> + msi-controller;
> + };
> +
> + v2m2: v2m@2 {
> + compatible = "arm,gic-v2m-frame";
> + reg = <0x00002000 0xffd>;
> + msi-controller;
> + };
> + };
> +
> + timer@b120000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0b120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + frame@b120000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b121000 0x1000>,
> + <0x0b122000 0x1000>;
reg
interrupts
frame-number
would be more consistent with most other nodes.
> + };
> +
> + frame@b123000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b123000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b124000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b124000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b125000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b125000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b126000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b126000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b127000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b127000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b128000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b128000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
The indentation seems off here.
Konrad
> + };
> +};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
2023-01-25 20:54 ` Stephen Boyd
@ 2023-01-26 16:45 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-26 16:45 UTC (permalink / raw)
To: Stephen Boyd, agross, andersson, arnd, bhupesh.sharma, broonie,
catalin.marinas, devicetree, dmitry.baryshkov, konrad.dybcio,
krzysztof.kozlowski+dt, linus.walleij, linux-arm-kernel,
linux-arm-msm, linux-clk, linux-gpio, linux-kernel, linux-mmc,
marcel.ziswiler, mturquette, nfraprado, quic_gurus, robh+dt,
robimarko, shawnguo, ulf.hansson, will
On 1/26/2023 2:24 AM, Stephen Boyd wrote:
> Quoting Kathiravan Thirumoorthy (2023-01-25 02:45:15)
>> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
>> new file mode 100644
>> index 000000000000..8351096a4d32
>> --- /dev/null
>> +++ b/drivers/clk/qcom/gcc-ipq5332.c
>> @@ -0,0 +1,3954 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
> [...]
>> +
>> +static const struct freq_tbl ftbl_gcc_pcnoc_bfdcd_clk_src[] = {
>> + F(24000000, P_XO, 1, 0, 0),
>> + F(50000000, P_GPLL0_OUT_MAIN, 16, 0, 0),
>> + F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
>> + { }
>> +};
>> +
>> +static struct clk_rcg2 gcc_pcnoc_bfdcd_clk_src = {
>> + .cmd_rcgr = 0x31004,
>> + .mnd_width = 0,
>> + .hid_width = 5,
>> + .parent_map = gcc_parent_map_0,
>> + .freq_tbl = ftbl_gcc_pcnoc_bfdcd_clk_src,
>> + .clkr.hw.init = &(const struct clk_init_data){
>> + .name = "gcc_pcnoc_bfdcd_clk_src",
>> + .parent_data = gcc_parent_data_0,
>> + .num_parents = ARRAY_SIZE(gcc_parent_data_0),
>> + .ops = &clk_rcg2_ops,
>> + .flags = CLK_IS_CRITICAL,
> Why not just turn these clks on in probe and never register them with
> the framework? That saves some memory for clks that there is no desire
> to control from linux. This is an RCG, so in theory the frequency can
> change, but does it really? Usually bus clks are controlled by the
> interconnect driver.
Thanks Stephen for reviewing the patch. I will look into this and make
changes appropriately in V2.
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
@ 2023-01-26 16:45 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-26 16:45 UTC (permalink / raw)
To: Stephen Boyd, agross, andersson, arnd, bhupesh.sharma, broonie,
catalin.marinas, devicetree, dmitry.baryshkov, konrad.dybcio,
krzysztof.kozlowski+dt, linus.walleij, linux-arm-kernel,
linux-arm-msm, linux-clk, linux-gpio, linux-kernel, linux-mmc,
marcel.ziswiler, mturquette, nfraprado, quic_gurus, robh+dt,
robimarko, shawnguo, ulf.hansson, will
On 1/26/2023 2:24 AM, Stephen Boyd wrote:
> Quoting Kathiravan Thirumoorthy (2023-01-25 02:45:15)
>> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
>> new file mode 100644
>> index 000000000000..8351096a4d32
>> --- /dev/null
>> +++ b/drivers/clk/qcom/gcc-ipq5332.c
>> @@ -0,0 +1,3954 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
> [...]
>> +
>> +static const struct freq_tbl ftbl_gcc_pcnoc_bfdcd_clk_src[] = {
>> + F(24000000, P_XO, 1, 0, 0),
>> + F(50000000, P_GPLL0_OUT_MAIN, 16, 0, 0),
>> + F(100000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
>> + { }
>> +};
>> +
>> +static struct clk_rcg2 gcc_pcnoc_bfdcd_clk_src = {
>> + .cmd_rcgr = 0x31004,
>> + .mnd_width = 0,
>> + .hid_width = 5,
>> + .parent_map = gcc_parent_map_0,
>> + .freq_tbl = ftbl_gcc_pcnoc_bfdcd_clk_src,
>> + .clkr.hw.init = &(const struct clk_init_data){
>> + .name = "gcc_pcnoc_bfdcd_clk_src",
>> + .parent_data = gcc_parent_data_0,
>> + .num_parents = ARRAY_SIZE(gcc_parent_data_0),
>> + .ops = &clk_rcg2_ops,
>> + .flags = CLK_IS_CRITICAL,
> Why not just turn these clks on in probe and never register them with
> the framework? That saves some memory for clks that there is no desire
> to control from linux. This is an RCG, so in theory the frequency can
> change, but does it really? Usually bus clks are controlled by the
> interconnect driver.
Thanks Stephen for reviewing the patch. I will look into this and make
changes appropriately in V2.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
2023-01-25 21:59 ` Konrad Dybcio
@ 2023-01-26 16:50 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-26 16:50 UTC (permalink / raw)
To: Konrad Dybcio, agross, andersson, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Thanks Konrad for taking time to review the patch.
On 1/26/2023 3:29 AM, Konrad Dybcio wrote:
>
> On 25.01.2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add initial device tree support for the Qualcomm IPQ5332 SoC and
>> MI01.2 board.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
>> 3 files changed, 345 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 3e79496292e7..fbd5bc583a9b 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> new file mode 100644
>> index 000000000000..7984d8f824ce
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> @@ -0,0 +1,71 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * IPQ5332 AP-MI01.2 board device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5332.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
>> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
>> +
>> + aliases {
>> + serial0 = &blsp1_uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0";
>> + };
>> +};
>> +
>> +&blsp1_uart0 {
>> + pinctrl-0 = <&serial_0_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +};
>> +
>> +&sdhc {
>> + pinctrl-0 = <&sdc_default_state>;
>> + pinctrl-names = "default";
>> + non-removable;
>> + status = "okay";
>> +};
>> +
>> +&sleep_clk {
>> + clock-frequency = <32000>;
>> +};
>> +
>> +&xo_board {
>> + clock-frequency = <24000000>;
>> +};
>> +
>> +/* PINCTRL */
>> +
>> +&tlmm {
>> + sdc_default_state: sdc-default-state {
>> + clk-pins {
>> + pins = "gpio13";
>> + function = "sdc_clk";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "gpio12";
>> + function = "sdc_cmd";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>> + function = "sdc_data";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> new file mode 100644
>> index 000000000000..d04244a3cd3a
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -0,0 +1,273 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * IPQ5332 device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + clocks {
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> +
>> + xo_board: xo-board-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x1>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU2: cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x2>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU3: cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x3>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + cache-level = <0x2>;
>> + };
>> + };
>> +
>> + firmware {
>> + scm {
>> + compatible = "qcom,scm-ipq5332", "qcom,scm";
>> + };
>> + };
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0x0 0x40000000 0x0 0x0>;
>> + };
>> +
>> + pmu {
>> + compatible = "arm,cortex-a53-pmu";
>> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + tz: memory@4a600000 {
> memory@ is discouraged, the node name should be somewhat
> descriptive of what lies in this reserved region. On the
> other hand, tz: sounds like a label to a trust zone device
> of some kind. I propose:
>
> tz_mem: tz@4a600000 {
>
> instead.
Ack.
>
>> + no-map;
>> + reg = <0x0 0x4a600000 0x0 0x200000>;
>> + };
>> + };
>> +
>> + soc@0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0 0xffffffff>;
>> + compatible = "simple-bus";
> Move compatible first, please.
Ack.
>
>> +
>> + tlmm: pinctrl@1000000 {
>> + compatible = "qcom,ipq5332-tlmm";
>> + reg = <0x01000000 0x300000>;
>> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 53>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> +
>> + serial_0_pins: serial0-state {
> You may be interested in having a suspend state for this
> one, so you may wish to rename this futureproofing-ly to
> serial0-active-state.
Ack. AFAIK, we don't support suspend state, anyways let me got back and
check it.
>
>> + pins = "gpio18", "gpio19";
>> + function = "blsp0_uart0";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +
>> + gcc: clock-controller@1800000 {
>> + compatible = "qcom,ipq5332-gcc";
>> + reg = <0x01800000 0x80000>;
>> + #clock-cells = <0x1>;
>> + #reset-cells = <0x1>;
> Decimal values for -cells, please.
Ack.
>
>> + #power-domain-cells = <1>;
>> + clock-names = "xo",
>> + "sleep_clk",
>> + "pcie_2lane_phy_pipe_clk",
>> + "pcie_2lane_phy_pipe_clk_x1",
>> + "usb_pcie_wrapper_pipe_clk";
>> + clocks = <&xo_board>,
>> + <&sleep_clk>,
>> + <0>,
>> + <0>,
>> + <0>;
>> + };
>> +
>> + sdhc: mmc@7804000 {
>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>> +
>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "core", "xo";
>> + mmc-ddr-1_8v;
>> + mmc-hs200-1_8v;
>> + max-frequency = <192000000>;
> As Krzysztof pointed out, this one should go.
Ack.
>
>> + bus-width = <4>;
> Oh that's interesting.. a 4-wide bus for eMMC?
Yes, eMMC is 4bit bus width with HS200 mode only.
>
>> + status = "disabled";
>> + };
>> +
>> + blsp1_uart0: serial@78af000 {
>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> + reg = <0x078af000 0x200>;
>> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + status = "disabled";
>> + };
>> +
>> + intc: interrupt-controller@b000000 {
>> + compatible = "qcom,msm-qgic2";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
> Please move these two above ranges..
Ack.
>
>> + interrupt-controller;
>> + #interrupt-cells = <0x3>;
> Decimal value, please.
Ack.
>
>> + reg = <0x0b000000 0x1000>, /* GICD */
>> + <0x0b002000 0x1000>, /* GICC */
>> + <0x0b001000 0x1000>, /* GICH */
>> + <0x0b004000 0x1000>; /* GICV */
> ..and reg just below compatible...
Ack.
>
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> ..and interrupts just below reg, please.
Ack.
>
>> + ranges = <0 0x0b00c000 0x3000>;
>> +
>> + v2m0: v2m@0 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x0 0xffd>;
> Please pad the reg for consistency.
Sure.
>> + msi-controller;
>> + };
>> +
>> + v2m1: v2m@1 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00001000 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m2: v2m@2 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00002000 0xffd>;
>> + msi-controller;
>> + };
>> + };
>> +
>> + timer@b120000 {
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0b120000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + frame@b120000 {
>> + frame-number = <0>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b121000 0x1000>,
>> + <0x0b122000 0x1000>;
> reg
> interrupts
> frame-number
>
> would be more consistent with most other nodes.
Ack.
>
>> + };
>> +
>> + frame@b123000 {
>> + frame-number = <1>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b123000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b124000 {
>> + frame-number = <2>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b124000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b125000 {
>> + frame-number = <3>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b125000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b126000 {
>> + frame-number = <4>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b126000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b127000 {
>> + frame-number = <5>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b127000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b128000 {
>> + frame-number = <6>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b128000 0x1000>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> The indentation seems off here.
Will fix it in V2. Thanks.
>
> Konrad
>> + };
>> +};
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
@ 2023-01-26 16:50 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-26 16:50 UTC (permalink / raw)
To: Konrad Dybcio, agross, andersson, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
Thanks Konrad for taking time to review the patch.
On 1/26/2023 3:29 AM, Konrad Dybcio wrote:
>
> On 25.01.2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add initial device tree support for the Qualcomm IPQ5332 SoC and
>> MI01.2 board.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273 ++++++++++++++++++++
>> 3 files changed, 345 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 3e79496292e7..fbd5bc583a9b 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> new file mode 100644
>> index 000000000000..7984d8f824ce
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>> @@ -0,0 +1,71 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * IPQ5332 AP-MI01.2 board device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5332.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
>> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
>> +
>> + aliases {
>> + serial0 = &blsp1_uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0";
>> + };
>> +};
>> +
>> +&blsp1_uart0 {
>> + pinctrl-0 = <&serial_0_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +};
>> +
>> +&sdhc {
>> + pinctrl-0 = <&sdc_default_state>;
>> + pinctrl-names = "default";
>> + non-removable;
>> + status = "okay";
>> +};
>> +
>> +&sleep_clk {
>> + clock-frequency = <32000>;
>> +};
>> +
>> +&xo_board {
>> + clock-frequency = <24000000>;
>> +};
>> +
>> +/* PINCTRL */
>> +
>> +&tlmm {
>> + sdc_default_state: sdc-default-state {
>> + clk-pins {
>> + pins = "gpio13";
>> + function = "sdc_clk";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "gpio12";
>> + function = "sdc_cmd";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>> + function = "sdc_data";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> new file mode 100644
>> index 000000000000..d04244a3cd3a
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -0,0 +1,273 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * IPQ5332 device tree source
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + clocks {
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> +
>> + xo_board: xo-board-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x1>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU2: cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x2>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + CPU3: cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x3>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + };
>> +
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + cache-level = <0x2>;
>> + };
>> + };
>> +
>> + firmware {
>> + scm {
>> + compatible = "qcom,scm-ipq5332", "qcom,scm";
>> + };
>> + };
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0x0 0x40000000 0x0 0x0>;
>> + };
>> +
>> + pmu {
>> + compatible = "arm,cortex-a53-pmu";
>> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + tz: memory@4a600000 {
> memory@ is discouraged, the node name should be somewhat
> descriptive of what lies in this reserved region. On the
> other hand, tz: sounds like a label to a trust zone device
> of some kind. I propose:
>
> tz_mem: tz@4a600000 {
>
> instead.
Ack.
>
>> + no-map;
>> + reg = <0x0 0x4a600000 0x0 0x200000>;
>> + };
>> + };
>> +
>> + soc@0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0 0xffffffff>;
>> + compatible = "simple-bus";
> Move compatible first, please.
Ack.
>
>> +
>> + tlmm: pinctrl@1000000 {
>> + compatible = "qcom,ipq5332-tlmm";
>> + reg = <0x01000000 0x300000>;
>> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 53>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> +
>> + serial_0_pins: serial0-state {
> You may be interested in having a suspend state for this
> one, so you may wish to rename this futureproofing-ly to
> serial0-active-state.
Ack. AFAIK, we don't support suspend state, anyways let me got back and
check it.
>
>> + pins = "gpio18", "gpio19";
>> + function = "blsp0_uart0";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> + };
>> +
>> + gcc: clock-controller@1800000 {
>> + compatible = "qcom,ipq5332-gcc";
>> + reg = <0x01800000 0x80000>;
>> + #clock-cells = <0x1>;
>> + #reset-cells = <0x1>;
> Decimal values for -cells, please.
Ack.
>
>> + #power-domain-cells = <1>;
>> + clock-names = "xo",
>> + "sleep_clk",
>> + "pcie_2lane_phy_pipe_clk",
>> + "pcie_2lane_phy_pipe_clk_x1",
>> + "usb_pcie_wrapper_pipe_clk";
>> + clocks = <&xo_board>,
>> + <&sleep_clk>,
>> + <0>,
>> + <0>,
>> + <0>;
>> + };
>> +
>> + sdhc: mmc@7804000 {
>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>> +
>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "core", "xo";
>> + mmc-ddr-1_8v;
>> + mmc-hs200-1_8v;
>> + max-frequency = <192000000>;
> As Krzysztof pointed out, this one should go.
Ack.
>
>> + bus-width = <4>;
> Oh that's interesting.. a 4-wide bus for eMMC?
Yes, eMMC is 4bit bus width with HS200 mode only.
>
>> + status = "disabled";
>> + };
>> +
>> + blsp1_uart0: serial@78af000 {
>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> + reg = <0x078af000 0x200>;
>> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + status = "disabled";
>> + };
>> +
>> + intc: interrupt-controller@b000000 {
>> + compatible = "qcom,msm-qgic2";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
> Please move these two above ranges..
Ack.
>
>> + interrupt-controller;
>> + #interrupt-cells = <0x3>;
> Decimal value, please.
Ack.
>
>> + reg = <0x0b000000 0x1000>, /* GICD */
>> + <0x0b002000 0x1000>, /* GICC */
>> + <0x0b001000 0x1000>, /* GICH */
>> + <0x0b004000 0x1000>; /* GICV */
> ..and reg just below compatible...
Ack.
>
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> ..and interrupts just below reg, please.
Ack.
>
>> + ranges = <0 0x0b00c000 0x3000>;
>> +
>> + v2m0: v2m@0 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x0 0xffd>;
> Please pad the reg for consistency.
Sure.
>> + msi-controller;
>> + };
>> +
>> + v2m1: v2m@1 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00001000 0xffd>;
>> + msi-controller;
>> + };
>> +
>> + v2m2: v2m@2 {
>> + compatible = "arm,gic-v2m-frame";
>> + reg = <0x00002000 0xffd>;
>> + msi-controller;
>> + };
>> + };
>> +
>> + timer@b120000 {
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0b120000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + frame@b120000 {
>> + frame-number = <0>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b121000 0x1000>,
>> + <0x0b122000 0x1000>;
> reg
> interrupts
> frame-number
>
> would be more consistent with most other nodes.
Ack.
>
>> + };
>> +
>> + frame@b123000 {
>> + frame-number = <1>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b123000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b124000 {
>> + frame-number = <2>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b124000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b125000 {
>> + frame-number = <3>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b125000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b126000 {
>> + frame-number = <4>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b126000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b127000 {
>> + frame-number = <5>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b127000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame@b128000 {
>> + frame-number = <6>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b128000 0x1000>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> The indentation seems off here.
Will fix it in V2. Thanks.
>
> Konrad
>> + };
>> +};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
2023-01-25 10:45 ` Kathiravan Thirumoorthy
@ 2023-01-27 10:56 ` Ulf Hansson
-1 siblings, 0 replies; 67+ messages in thread
From: Ulf Hansson @ 2023-01-27 10:56 UTC (permalink / raw)
To: Kathiravan Thirumoorthy
Cc: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij,
catalin.marinas, will, shawnguo, arnd, marcel.ziswiler,
dmitry.baryshkov, nfraprado, broonie, robimarko, quic_gurus,
bhupesh.sharma, linux-arm-msm, devicetree, linux-kernel,
linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On Wed, 25 Jan 2023 at 11:46, Kathiravan Thirumoorthy
<quic_kathirav@quicinc.com> wrote:
>
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> The IPQ5332 supports eMMC with an SDHCI controller. Add the appropriate
> compatible to the documentation.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Applied for next, thanks!
Kind regards
Uffe
> ---
> Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> index 6b89238f0565..ead91f95e877 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> @@ -34,6 +34,7 @@ properties:
> - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
> - items:
> - enum:
> + - qcom,ipq5332-sdhci
> - qcom,qcs404-sdhci
> - qcom,sc7180-sdhci
> - qcom,sc7280-sdhci
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
@ 2023-01-27 10:56 ` Ulf Hansson
0 siblings, 0 replies; 67+ messages in thread
From: Ulf Hansson @ 2023-01-27 10:56 UTC (permalink / raw)
To: Kathiravan Thirumoorthy
Cc: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij,
catalin.marinas, will, shawnguo, arnd, marcel.ziswiler,
dmitry.baryshkov, nfraprado, broonie, robimarko, quic_gurus,
bhupesh.sharma, linux-arm-msm, devicetree, linux-kernel,
linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On Wed, 25 Jan 2023 at 11:46, Kathiravan Thirumoorthy
<quic_kathirav@quicinc.com> wrote:
>
> From: Kathiravan T <quic_kathirav@quicinc.com>
>
> The IPQ5332 supports eMMC with an SDHCI controller. Add the appropriate
> compatible to the documentation.
>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Applied for next, thanks!
Kind regards
Uffe
> ---
> Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> index 6b89238f0565..ead91f95e877 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> @@ -34,6 +34,7 @@ properties:
> - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
> - items:
> - enum:
> + - qcom,ipq5332-sdhci
> - qcom,qcs404-sdhci
> - qcom,sc7180-sdhci
> - qcom,sc7280-sdhci
> --
> 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
2023-01-26 16:50 ` Kathiravan Thirumoorthy
@ 2023-01-30 11:56 ` Kathiravan Thirumoorthy
-1 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-30 11:56 UTC (permalink / raw)
To: Konrad Dybcio, agross, andersson, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/26/2023 10:20 PM, Kathiravan Thirumoorthy wrote:
> Thanks Konrad for taking time to review the patch.
>
>
> On 1/26/2023 3:29 AM, Konrad Dybcio wrote:
>>
>> On 25.01.2023 11:45, Kathiravan Thirumoorthy wrote:
>>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>>
>>> Add initial device tree support for the Qualcomm IPQ5332 SoC and
>>> MI01.2 board.
>>>
>>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>>> ---
>>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>>> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
>>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273
>>> ++++++++++++++++++++
>>> 3 files changed, 345 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile
>>> b/arch/arm64/boot/dts/qcom/Makefile
>>> index 3e79496292e7..fbd5bc583a9b 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) +=
>>> apq8094-sony-xperia-kitakami-karin_windy.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> new file mode 100644
>>> index 000000000000..7984d8f824ce
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> @@ -0,0 +1,71 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ5332 AP-MI01.2 board device tree source
>>> + *
>>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All
>>> rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "ipq5332.dtsi"
>>> +
>>> +/ {
>>> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
>>> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
>>> +
>>> + aliases {
>>> + serial0 = &blsp1_uart0;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0";
>>> + };
>>> +};
>>> +
>>> +&blsp1_uart0 {
>>> + pinctrl-0 = <&serial_0_pins>;
>>> + pinctrl-names = "default";
>>> + status = "okay";
>>> +};
>>> +
>>> +&sdhc {
>>> + pinctrl-0 = <&sdc_default_state>;
>>> + pinctrl-names = "default";
>>> + non-removable;
>>> + status = "okay";
>>> +};
>>> +
>>> +&sleep_clk {
>>> + clock-frequency = <32000>;
>>> +};
>>> +
>>> +&xo_board {
>>> + clock-frequency = <24000000>;
>>> +};
>>> +
>>> +/* PINCTRL */
>>> +
>>> +&tlmm {
>>> + sdc_default_state: sdc-default-state {
>>> + clk-pins {
>>> + pins = "gpio13";
>>> + function = "sdc_clk";
>>> + drive-strength = <8>;
>>> + bias-disable;
>>> + };
>>> +
>>> + cmd-pins {
>>> + pins = "gpio12";
>>> + function = "sdc_cmd";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + data-pins {
>>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>>> + function = "sdc_data";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> new file mode 100644
>>> index 000000000000..d04244a3cd3a
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> @@ -0,0 +1,273 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * IPQ5332 device tree source
>>> + *
>>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All
>>> rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +
>>> +/ {
>>> + interrupt-parent = <&intc>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + clocks {
>>> + sleep_clk: sleep-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + xo_board: xo-board-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> + };
>>> +
>>> + cpus {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + CPU0: cpu@0 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x0>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + CPU1: cpu@1 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x1>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + CPU2: cpu@2 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x2>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + CPU3: cpu@3 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x3>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + L2_0: l2-cache {
>>> + compatible = "cache";
>>> + cache-level = <0x2>;
>>> + };
>>> + };
>>> +
>>> + firmware {
>>> + scm {
>>> + compatible = "qcom,scm-ipq5332", "qcom,scm";
>>> + };
>>> + };
>>> +
>>> + memory@40000000 {
>>> + device_type = "memory";
>>> + /* We expect the bootloader to fill in the size */
>>> + reg = <0x0 0x40000000 0x0 0x0>;
>>> + };
>>> +
>>> + pmu {
>>> + compatible = "arm,cortex-a53-pmu";
>>> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_HIGH)>;
>>> + };
>>> +
>>> + psci {
>>> + compatible = "arm,psci-1.0";
>>> + method = "smc";
>>> + };
>>> +
>>> + reserved-memory {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + tz: memory@4a600000 {
>> memory@ is discouraged, the node name should be somewhat
>> descriptive of what lies in this reserved region. On the
>> other hand, tz: sounds like a label to a trust zone device
>> of some kind. I propose:
>>
>> tz_mem: tz@4a600000 {
>>
>> instead.
>
>
> Ack.
>
>
>>
>>> + no-map;
>>> + reg = <0x0 0x4a600000 0x0 0x200000>;
>>> + };
>>> + };
>>> +
>>> + soc@0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0 0 0 0xffffffff>;
>>> + compatible = "simple-bus";
>> Move compatible first, please.
>
>
> Ack.
>
>
>>
>>> +
>>> + tlmm: pinctrl@1000000 {
>>> + compatible = "qcom,ipq5332-tlmm";
>>> + reg = <0x01000000 0x300000>;
>>> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
>>> + gpio-controller;
>>> + #gpio-cells = <2>;
>>> + gpio-ranges = <&tlmm 0 0 53>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> +
>>> + serial_0_pins: serial0-state {
>> You may be interested in having a suspend state for this
>> one, so you may wish to rename this futureproofing-ly to
>> serial0-active-state.
>
>
> Ack. AFAIK, we don't support suspend state, anyways let me got back
> and check it.
Konrad, we don't support the suspend state for the console UART, so left
the node name as it is in V2.
>
>
>>
>>> + pins = "gpio18", "gpio19";
>>> + function = "blsp0_uart0";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> + };
>>> +
>>> + gcc: clock-controller@1800000 {
>>> + compatible = "qcom,ipq5332-gcc";
>>> + reg = <0x01800000 0x80000>;
>>> + #clock-cells = <0x1>;
>>> + #reset-cells = <0x1>;
>> Decimal values for -cells, please.
>
>
> Ack.
>
>
>>
>>> + #power-domain-cells = <1>;
>>> + clock-names = "xo",
>>> + "sleep_clk",
>>> + "pcie_2lane_phy_pipe_clk",
>>> + "pcie_2lane_phy_pipe_clk_x1",
>>> + "usb_pcie_wrapper_pipe_clk";
>>> + clocks = <&xo_board>,
>>> + <&sleep_clk>,
>>> + <0>,
>>> + <0>,
>>> + <0>;
>>> + };
>>> +
>>> + sdhc: mmc@7804000 {
>>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>> +
>>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "hc_irq", "pwr_irq";
>>> +
>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>> + <&xo_board>;
>>> + clock-names = "iface", "core", "xo";
>>> + mmc-ddr-1_8v;
>>> + mmc-hs200-1_8v;
>>> + max-frequency = <192000000>;
>> As Krzysztof pointed out, this one should go.
>
>
> Ack.
Krzysztof & Konrad,
These are the properties of the SDHC controller present in the SoC. So I
think no need to move out these properties to board DTS. Please let me
know if my understanding is otherwise.
>
>
>>
>>> + bus-width = <4>;
>> Oh that's interesting.. a 4-wide bus for eMMC?
>
>
> Yes, eMMC is 4bit bus width with HS200 mode only.
>
>
>>
>>> + status = "disabled";
>>> + };
>>> +
>>> + blsp1_uart0: serial@78af000 {
>>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>>> + reg = <0x078af000 0x200>;
>>> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
>>> + <&gcc GCC_BLSP1_AHB_CLK>;
>>> + clock-names = "core", "iface";
>>> + status = "disabled";
>>> + };
>>> +
>>> + intc: interrupt-controller@b000000 {
>>> + compatible = "qcom,msm-qgic2";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>> Please move these two above ranges..
>
>
> Ack.
>
>
>>
>>> + interrupt-controller;
>>> + #interrupt-cells = <0x3>;
>> Decimal value, please.
>
>
> Ack.
>
>
>>
>>> + reg = <0x0b000000 0x1000>, /* GICD */
>>> + <0x0b002000 0x1000>, /* GICC */
>>> + <0x0b001000 0x1000>, /* GICH */
>>> + <0x0b004000 0x1000>; /* GICV */
>> ..and reg just below compatible...
>
> Ack.
>
>
>>
>>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> ..and interrupts just below reg, please.
>
> Ack.
>
>
>>
>>> + ranges = <0 0x0b00c000 0x3000>;
>>> +
>>> + v2m0: v2m@0 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x0 0xffd>;
>> Please pad the reg for consistency.
>
>
> Sure.
>
>
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m1: v2m@1 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00001000 0xffd>;
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m2: v2m@2 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00002000 0xffd>;
>>> + msi-controller;
>>> + };
>>> + };
>>> +
>>> + timer@b120000 {
>>> + compatible = "arm,armv7-timer-mem";
>>> + reg = <0x0b120000 0x1000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + frame@b120000 {
>>> + frame-number = <0>;
>>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b121000 0x1000>,
>>> + <0x0b122000 0x1000>;
>> reg
>> interrupts
>> frame-number
>>
>> would be more consistent with most other nodes.
> Ack.
>>
>>> + };
>>> +
>>> + frame@b123000 {
>>> + frame-number = <1>;
>>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b123000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b124000 {
>>> + frame-number = <2>;
>>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b124000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b125000 {
>>> + frame-number = <3>;
>>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b125000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b126000 {
>>> + frame-number = <4>;
>>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b126000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b127000 {
>>> + frame-number = <5>;
>>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b127000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b128000 {
>>> + frame-number = <6>;
>>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b128000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + };
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>;
>> The indentation seems off here.
>
>
> Will fix it in V2. Thanks.
>
>
>>
>> Konrad
>>> + };
>>> +};
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
@ 2023-01-30 11:56 ` Kathiravan Thirumoorthy
0 siblings, 0 replies; 67+ messages in thread
From: Kathiravan Thirumoorthy @ 2023-01-30 11:56 UTC (permalink / raw)
To: Konrad Dybcio, agross, andersson, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 1/26/2023 10:20 PM, Kathiravan Thirumoorthy wrote:
> Thanks Konrad for taking time to review the patch.
>
>
> On 1/26/2023 3:29 AM, Konrad Dybcio wrote:
>>
>> On 25.01.2023 11:45, Kathiravan Thirumoorthy wrote:
>>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>>
>>> Add initial device tree support for the Qualcomm IPQ5332 SoC and
>>> MI01.2 board.
>>>
>>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>>> ---
>>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>>> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 71 +++++
>>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 273
>>> ++++++++++++++++++++
>>> 3 files changed, 345 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile
>>> b/arch/arm64/boot/dts/qcom/Makefile
>>> index 3e79496292e7..fbd5bc583a9b 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) +=
>>> apq8094-sony-xperia-kitakami-karin_windy.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> new file mode 100644
>>> index 000000000000..7984d8f824ce
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
>>> @@ -0,0 +1,71 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ5332 AP-MI01.2 board device tree source
>>> + *
>>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All
>>> rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "ipq5332.dtsi"
>>> +
>>> +/ {
>>> + model = "Qualcomm Technologies, Inc. IPQ5332/AP-MI01.2";
>>> + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
>>> +
>>> + aliases {
>>> + serial0 = &blsp1_uart0;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0";
>>> + };
>>> +};
>>> +
>>> +&blsp1_uart0 {
>>> + pinctrl-0 = <&serial_0_pins>;
>>> + pinctrl-names = "default";
>>> + status = "okay";
>>> +};
>>> +
>>> +&sdhc {
>>> + pinctrl-0 = <&sdc_default_state>;
>>> + pinctrl-names = "default";
>>> + non-removable;
>>> + status = "okay";
>>> +};
>>> +
>>> +&sleep_clk {
>>> + clock-frequency = <32000>;
>>> +};
>>> +
>>> +&xo_board {
>>> + clock-frequency = <24000000>;
>>> +};
>>> +
>>> +/* PINCTRL */
>>> +
>>> +&tlmm {
>>> + sdc_default_state: sdc-default-state {
>>> + clk-pins {
>>> + pins = "gpio13";
>>> + function = "sdc_clk";
>>> + drive-strength = <8>;
>>> + bias-disable;
>>> + };
>>> +
>>> + cmd-pins {
>>> + pins = "gpio12";
>>> + function = "sdc_cmd";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + data-pins {
>>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>>> + function = "sdc_data";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> new file mode 100644
>>> index 000000000000..d04244a3cd3a
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>>> @@ -0,0 +1,273 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * IPQ5332 device tree source
>>> + *
>>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All
>>> rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/clock/qcom,gcc-ipq5332.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +
>>> +/ {
>>> + interrupt-parent = <&intc>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + clocks {
>>> + sleep_clk: sleep-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + xo_board: xo-board-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> + };
>>> +
>>> + cpus {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + CPU0: cpu@0 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x0>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + CPU1: cpu@1 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x1>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + CPU2: cpu@2 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x2>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + CPU3: cpu@3 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a53";
>>> + reg = <0x3>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&L2_0>;
>>> + };
>>> +
>>> + L2_0: l2-cache {
>>> + compatible = "cache";
>>> + cache-level = <0x2>;
>>> + };
>>> + };
>>> +
>>> + firmware {
>>> + scm {
>>> + compatible = "qcom,scm-ipq5332", "qcom,scm";
>>> + };
>>> + };
>>> +
>>> + memory@40000000 {
>>> + device_type = "memory";
>>> + /* We expect the bootloader to fill in the size */
>>> + reg = <0x0 0x40000000 0x0 0x0>;
>>> + };
>>> +
>>> + pmu {
>>> + compatible = "arm,cortex-a53-pmu";
>>> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_HIGH)>;
>>> + };
>>> +
>>> + psci {
>>> + compatible = "arm,psci-1.0";
>>> + method = "smc";
>>> + };
>>> +
>>> + reserved-memory {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + tz: memory@4a600000 {
>> memory@ is discouraged, the node name should be somewhat
>> descriptive of what lies in this reserved region. On the
>> other hand, tz: sounds like a label to a trust zone device
>> of some kind. I propose:
>>
>> tz_mem: tz@4a600000 {
>>
>> instead.
>
>
> Ack.
>
>
>>
>>> + no-map;
>>> + reg = <0x0 0x4a600000 0x0 0x200000>;
>>> + };
>>> + };
>>> +
>>> + soc@0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0 0 0 0xffffffff>;
>>> + compatible = "simple-bus";
>> Move compatible first, please.
>
>
> Ack.
>
>
>>
>>> +
>>> + tlmm: pinctrl@1000000 {
>>> + compatible = "qcom,ipq5332-tlmm";
>>> + reg = <0x01000000 0x300000>;
>>> + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
>>> + gpio-controller;
>>> + #gpio-cells = <2>;
>>> + gpio-ranges = <&tlmm 0 0 53>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> +
>>> + serial_0_pins: serial0-state {
>> You may be interested in having a suspend state for this
>> one, so you may wish to rename this futureproofing-ly to
>> serial0-active-state.
>
>
> Ack. AFAIK, we don't support suspend state, anyways let me got back
> and check it.
Konrad, we don't support the suspend state for the console UART, so left
the node name as it is in V2.
>
>
>>
>>> + pins = "gpio18", "gpio19";
>>> + function = "blsp0_uart0";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> + };
>>> +
>>> + gcc: clock-controller@1800000 {
>>> + compatible = "qcom,ipq5332-gcc";
>>> + reg = <0x01800000 0x80000>;
>>> + #clock-cells = <0x1>;
>>> + #reset-cells = <0x1>;
>> Decimal values for -cells, please.
>
>
> Ack.
>
>
>>
>>> + #power-domain-cells = <1>;
>>> + clock-names = "xo",
>>> + "sleep_clk",
>>> + "pcie_2lane_phy_pipe_clk",
>>> + "pcie_2lane_phy_pipe_clk_x1",
>>> + "usb_pcie_wrapper_pipe_clk";
>>> + clocks = <&xo_board>,
>>> + <&sleep_clk>,
>>> + <0>,
>>> + <0>,
>>> + <0>;
>>> + };
>>> +
>>> + sdhc: mmc@7804000 {
>>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>> +
>>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "hc_irq", "pwr_irq";
>>> +
>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>> + <&xo_board>;
>>> + clock-names = "iface", "core", "xo";
>>> + mmc-ddr-1_8v;
>>> + mmc-hs200-1_8v;
>>> + max-frequency = <192000000>;
>> As Krzysztof pointed out, this one should go.
>
>
> Ack.
Krzysztof & Konrad,
These are the properties of the SDHC controller present in the SoC. So I
think no need to move out these properties to board DTS. Please let me
know if my understanding is otherwise.
>
>
>>
>>> + bus-width = <4>;
>> Oh that's interesting.. a 4-wide bus for eMMC?
>
>
> Yes, eMMC is 4bit bus width with HS200 mode only.
>
>
>>
>>> + status = "disabled";
>>> + };
>>> +
>>> + blsp1_uart0: serial@78af000 {
>>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>>> + reg = <0x078af000 0x200>;
>>> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
>>> + <&gcc GCC_BLSP1_AHB_CLK>;
>>> + clock-names = "core", "iface";
>>> + status = "disabled";
>>> + };
>>> +
>>> + intc: interrupt-controller@b000000 {
>>> + compatible = "qcom,msm-qgic2";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>> Please move these two above ranges..
>
>
> Ack.
>
>
>>
>>> + interrupt-controller;
>>> + #interrupt-cells = <0x3>;
>> Decimal value, please.
>
>
> Ack.
>
>
>>
>>> + reg = <0x0b000000 0x1000>, /* GICD */
>>> + <0x0b002000 0x1000>, /* GICC */
>>> + <0x0b001000 0x1000>, /* GICH */
>>> + <0x0b004000 0x1000>; /* GICV */
>> ..and reg just below compatible...
>
> Ack.
>
>
>>
>>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> ..and interrupts just below reg, please.
>
> Ack.
>
>
>>
>>> + ranges = <0 0x0b00c000 0x3000>;
>>> +
>>> + v2m0: v2m@0 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x0 0xffd>;
>> Please pad the reg for consistency.
>
>
> Sure.
>
>
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m1: v2m@1 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00001000 0xffd>;
>>> + msi-controller;
>>> + };
>>> +
>>> + v2m2: v2m@2 {
>>> + compatible = "arm,gic-v2m-frame";
>>> + reg = <0x00002000 0xffd>;
>>> + msi-controller;
>>> + };
>>> + };
>>> +
>>> + timer@b120000 {
>>> + compatible = "arm,armv7-timer-mem";
>>> + reg = <0x0b120000 0x1000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + frame@b120000 {
>>> + frame-number = <0>;
>>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b121000 0x1000>,
>>> + <0x0b122000 0x1000>;
>> reg
>> interrupts
>> frame-number
>>
>> would be more consistent with most other nodes.
> Ack.
>>
>>> + };
>>> +
>>> + frame@b123000 {
>>> + frame-number = <1>;
>>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b123000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b124000 {
>>> + frame-number = <2>;
>>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b124000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b125000 {
>>> + frame-number = <3>;
>>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b125000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b126000 {
>>> + frame-number = <4>;
>>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b126000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b127000 {
>>> + frame-number = <5>;
>>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b127000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + frame@b128000 {
>>> + frame-number = <6>;
>>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> + reg = <0x0b128000 0x1000>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + };
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>,
>>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) |
>>> IRQ_TYPE_LEVEL_LOW)>;
>> The indentation seems off here.
>
>
> Will fix it in V2. Thanks.
>
>
>>
>> Konrad
>>> + };
>>> +};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
2023-01-30 11:56 ` Kathiravan Thirumoorthy
@ 2023-01-31 19:24 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-31 19:24 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, Konrad Dybcio, agross, andersson,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 30/01/2023 12:56, Kathiravan Thirumoorthy wrote:
>>>> + sdhc: mmc@7804000 {
>>>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>>> +
>>>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>>>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>>>> + interrupt-names = "hc_irq", "pwr_irq";
>>>> +
>>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>>> + <&xo_board>;
>>>> + clock-names = "iface", "core", "xo";
>>>> + mmc-ddr-1_8v;
>>>> + mmc-hs200-1_8v;
>>>> + max-frequency = <192000000>;
>>> As Krzysztof pointed out, this one should go.
>>
>>
>> Ack.
>
> Krzysztof & Konrad,
>
> These are the properties of the SDHC controller present in the SoC. So I
> think no need to move out these properties to board DTS. Please let me
> know if my understanding is otherwise.
Usually max frequency of SDHC controller is depending on the board, so
no, it is not a property of SoC. The same with type of attached memory.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
@ 2023-01-31 19:24 ` Krzysztof Kozlowski
0 siblings, 0 replies; 67+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-31 19:24 UTC (permalink / raw)
To: Kathiravan Thirumoorthy, Konrad Dybcio, agross, andersson,
robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, ulf.hansson,
linus.walleij, catalin.marinas, will, shawnguo, arnd,
marcel.ziswiler, dmitry.baryshkov, nfraprado, broonie, robimarko,
quic_gurus, bhupesh.sharma, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-mmc, linux-gpio, linux-arm-kernel
On 30/01/2023 12:56, Kathiravan Thirumoorthy wrote:
>>>> + sdhc: mmc@7804000 {
>>>> + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
>>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>>> +
>>>> + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
>>>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
>>>> + interrupt-names = "hc_irq", "pwr_irq";
>>>> +
>>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>>> + <&xo_board>;
>>>> + clock-names = "iface", "core", "xo";
>>>> + mmc-ddr-1_8v;
>>>> + mmc-hs200-1_8v;
>>>> + max-frequency = <192000000>;
>>> As Krzysztof pointed out, this one should go.
>>
>>
>> Ack.
>
> Krzysztof & Konrad,
>
> These are the properties of the SDHC controller present in the SoC. So I
> think no need to move out these properties to board DTS. Please let me
> know if my understanding is otherwise.
Usually max frequency of SDHC controller is depending on the board, so
no, it is not a property of SoC. The same with type of attached memory.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 67+ messages in thread
end of thread, other threads:[~2023-01-31 19:25 UTC | newest]
Thread overview: 67+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-25 10:45 [PATCH 00/10] Add minimal boot support for IPQ5332 Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 10:45 ` [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 11:10 ` Krzysztof Kozlowski
2023-01-25 11:10 ` Krzysztof Kozlowski
2023-01-25 15:49 ` Kathiravan Thirumoorthy
2023-01-25 15:49 ` Kathiravan Thirumoorthy
2023-01-25 16:20 ` Krzysztof Kozlowski
2023-01-25 16:20 ` Krzysztof Kozlowski
2023-01-25 16:38 ` Kathiravan Thirumoorthy
2023-01-25 16:38 ` Kathiravan Thirumoorthy
2023-01-25 10:45 ` [PATCH 02/10] pinctrl: qcom: Introduce IPQ5332 TLMM driver Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 10:45 ` [PATCH 03/10] clk: qcom: Add STROMER PLUS PLL type for IPQ5332 Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 20:35 ` Stephen Boyd
2023-01-25 20:35 ` Stephen Boyd
2023-01-25 10:45 ` [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 11:13 ` Krzysztof Kozlowski
2023-01-25 11:13 ` Krzysztof Kozlowski
2023-01-25 15:50 ` Kathiravan Thirumoorthy
2023-01-25 15:50 ` Kathiravan Thirumoorthy
2023-01-25 10:45 ` [PATCH 05/10] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC Kathiravan Thirumoorthy
2023-01-25 11:14 ` Krzysztof Kozlowski
2023-01-25 11:14 ` Krzysztof Kozlowski
2023-01-25 15:53 ` Kathiravan Thirumoorthy
2023-01-25 15:53 ` Kathiravan Thirumoorthy
2023-01-25 20:54 ` Stephen Boyd
2023-01-25 20:54 ` Stephen Boyd
2023-01-26 16:45 ` Kathiravan Thirumoorthy
2023-01-26 16:45 ` Kathiravan Thirumoorthy
2023-01-25 10:45 ` [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 11:15 ` Krzysztof Kozlowski
2023-01-25 11:15 ` Krzysztof Kozlowski
2023-01-25 15:55 ` Kathiravan Thirumoorthy
2023-01-25 15:55 ` Kathiravan Thirumoorthy
2023-01-25 10:45 ` [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 11:16 ` Krzysztof Kozlowski
2023-01-25 11:16 ` Krzysztof Kozlowski
2023-01-25 15:55 ` Kathiravan Thirumoorthy
2023-01-25 15:55 ` Kathiravan Thirumoorthy
2023-01-25 10:45 ` [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 11:17 ` Krzysztof Kozlowski
2023-01-25 11:17 ` Krzysztof Kozlowski
2023-01-27 10:56 ` Ulf Hansson
2023-01-27 10:56 ` Ulf Hansson
2023-01-25 10:45 ` [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
2023-01-25 11:22 ` Krzysztof Kozlowski
2023-01-25 11:22 ` Krzysztof Kozlowski
2023-01-25 16:05 ` Kathiravan Thirumoorthy
2023-01-25 16:05 ` Kathiravan Thirumoorthy
2023-01-25 21:59 ` Konrad Dybcio
2023-01-25 21:59 ` Konrad Dybcio
2023-01-26 16:50 ` Kathiravan Thirumoorthy
2023-01-26 16:50 ` Kathiravan Thirumoorthy
2023-01-30 11:56 ` Kathiravan Thirumoorthy
2023-01-30 11:56 ` Kathiravan Thirumoorthy
2023-01-31 19:24 ` Krzysztof Kozlowski
2023-01-31 19:24 ` Krzysztof Kozlowski
2023-01-25 10:45 ` [PATCH 10/10] arm64: defconfig: Enable IPQ5332 SoC base configs Kathiravan Thirumoorthy
2023-01-25 10:45 ` Kathiravan Thirumoorthy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.