All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: Pawel Laszczak <pawell@cadence.com>, <devicetree@vger.kernel.org>
Cc: <gregkh@linuxfoundation.org>, <felipe.balbi@linux.intel.com>,
	<linux-usb@vger.kernel.org>, <hdegoede@redhat.com>,
	<heikki.krogerus@linux.intel.com>, <robh+dt@kernel.org>,
	<linux-kernel@vger.kernel.org>, <jbergsagel@ti.com>,
	<nsekhar@ti.com>, <nm@ti.com>, <sureshp@cadence.com>,
	<peter.chen@nxp.com>, <jpawar@cadence.com>, <kurahul@cadence.com>
Subject: Re: [PATCH v7 1/6] dt-bindings: add binding for USBSS-DRD controller.
Date: Thu, 6 Jun 2019 15:08:55 +0300	[thread overview]
Message-ID: <f032b3f3-409d-b0fc-8d5f-01c898b4c7a7@ti.com> (raw)
In-Reply-To: <1559729030-16390-2-git-send-email-pawell@cadence.com>

Pawel,

On 05/06/2019 13:03, Pawel Laszczak wrote:
> This patch aim at documenting USB related dt-bindings for the
> Cadence USBSS-DRD controller.
> 
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> ---
>  .../devicetree/bindings/usb/cdns-usb3.txt     | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> new file mode 100644
> index 000000000000..1d2b449e3cb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> @@ -0,0 +1,30 @@
> +Binding for the Cadence USBSS-DRD controller
> +
> +Required properties:
> +  - reg: Physical base address and size of the controller's register areas.
> +	 Controller has 3 different regions:
> +	 region 1 - HOST registers area
> +	 region 2 - DEVICE registers area
> +	 region 3 - OTG/DRD registers area
> +  - reg-names - register memory area names:
> +	"xhci" - for HOST registers space
> +	"dev" - for DEVICE registers space
> +	"otg" - for OTG/DRD registers space
> +  - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
> +  - interrupts: Interrupts used by cdns3 controller.

Since we are requesting 3 separate named interrupts in code we need to
mention them here.

> +
> +Optional properties:
> + - maximum-speed : valid arguments are "super-speed", "high-speed" and
> +                   "full-speed"; refer to usb/generic.txt
> + - dr_mode: Should be one of "host", "peripheral" or "otg".
> + - phys: reference to the USB PHY
> +
> +Example:
> +	usb@f3000000 {
> +		compatible = "cdns,usb3-1.0.1";
> +		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;

This example won't work as code requests for 3 separate interrupts.

> +		reg = <0xf3000000 0x10000	/* memory area for HOST registers */
> +			0xf3010000 0x10000	/* memory area for DEVICE registers */
> +			0xf3020000 0x10000>;	/* memory area for OTG/DRD registers */
> +		reg-names = "xhci", "dev", "otg";
> +	};
> 

-- 
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: Pawel Laszczak <pawell@cadence.com>, devicetree@vger.kernel.org
Cc: gregkh@linuxfoundation.org, felipe.balbi@linux.intel.com,
	linux-usb@vger.kernel.org, hdegoede@redhat.com,
	heikki.krogerus@linux.intel.com, robh+dt@kernel.org,
	linux-kernel@vger.kernel.org, jbergsagel@ti.com, nsekhar@ti.com,
	nm@ti.com, sureshp@cadence.com, peter.chen@nxp.com,
	jpawar@cadence.com, kurahul@cadence.com
Subject: Re: [PATCH v7 1/6] dt-bindings: add binding for USBSS-DRD controller.
Date: Thu, 6 Jun 2019 15:08:55 +0300	[thread overview]
Message-ID: <f032b3f3-409d-b0fc-8d5f-01c898b4c7a7@ti.com> (raw)
In-Reply-To: <1559729030-16390-2-git-send-email-pawell@cadence.com>

Pawel,

On 05/06/2019 13:03, Pawel Laszczak wrote:
> This patch aim at documenting USB related dt-bindings for the
> Cadence USBSS-DRD controller.
> 
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> ---
>  .../devicetree/bindings/usb/cdns-usb3.txt     | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> new file mode 100644
> index 000000000000..1d2b449e3cb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> @@ -0,0 +1,30 @@
> +Binding for the Cadence USBSS-DRD controller
> +
> +Required properties:
> +  - reg: Physical base address and size of the controller's register areas.
> +	 Controller has 3 different regions:
> +	 region 1 - HOST registers area
> +	 region 2 - DEVICE registers area
> +	 region 3 - OTG/DRD registers area
> +  - reg-names - register memory area names:
> +	"xhci" - for HOST registers space
> +	"dev" - for DEVICE registers space
> +	"otg" - for OTG/DRD registers space
> +  - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
> +  - interrupts: Interrupts used by cdns3 controller.

Since we are requesting 3 separate named interrupts in code we need to
mention them here.

> +
> +Optional properties:
> + - maximum-speed : valid arguments are "super-speed", "high-speed" and
> +                   "full-speed"; refer to usb/generic.txt
> + - dr_mode: Should be one of "host", "peripheral" or "otg".
> + - phys: reference to the USB PHY
> +
> +Example:
> +	usb@f3000000 {
> +		compatible = "cdns,usb3-1.0.1";
> +		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;

This example won't work as code requests for 3 separate interrupts.

> +		reg = <0xf3000000 0x10000	/* memory area for HOST registers */
> +			0xf3010000 0x10000	/* memory area for DEVICE registers */
> +			0xf3020000 0x10000>;	/* memory area for OTG/DRD registers */
> +		reg-names = "xhci", "dev", "otg";
> +	};
> 

-- 
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

  reply	other threads:[~2019-06-06 12:09 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-05 10:03 [PATCH v7 0/6] Introduced new Cadence USBSS DRD Driver Pawel Laszczak
2019-06-05 10:03 ` Pawel Laszczak
2019-06-05 10:03 ` [PATCH v7 1/6] dt-bindings: add binding for USBSS-DRD controller Pawel Laszczak
2019-06-05 10:03   ` Pawel Laszczak
2019-06-06 12:08   ` Roger Quadros [this message]
2019-06-06 12:08     ` Roger Quadros
2019-06-07  4:46     ` Pawel Laszczak
2019-06-07  9:25       ` Roger Quadros
2019-06-10  4:58         ` Pawel Laszczak
2019-06-10  6:13           ` Peter Chen
2019-06-10  6:45             ` Pawel Laszczak
2019-06-10  6:52               ` Peter Chen
2019-06-05 10:03 ` [PATCH v7 2/6] usb:common Separated decoding functions from dwc3 driver Pawel Laszczak
2019-06-05 10:03   ` Pawel Laszczak
2019-06-08 13:40   ` Greg KH
2019-06-10  6:29     ` Pawel Laszczak
2019-06-10 11:57       ` Roger Quadros
2019-06-05 10:03 ` [PATCH v7 3/6] usb:common Patch simplify usb_decode_set_clear_feature function Pawel Laszczak
2019-06-05 10:03   ` Pawel Laszczak
2019-06-05 10:03 ` [PATCH v7 4/6] usb:common Simplify usb_decode_get_set_descriptor function Pawel Laszczak
2019-06-05 10:03   ` Pawel Laszczak
2019-06-05 10:03 ` [PATCH v7 5/6] usb:cdns3 Add Cadence USB3 DRD Driver Pawel Laszczak
2019-06-05 10:03   ` Pawel Laszczak
2019-06-06 12:16   ` Roger Quadros
2019-06-06 12:16     ` Roger Quadros
2019-06-07  7:59     ` Pawel Laszczak
2019-06-07 10:16   ` Heikki Krogerus
2019-06-10  6:33     ` Pawel Laszczak
2019-06-11  8:53       ` Heikki Krogerus
2019-06-14  6:31   ` Jun Li
2019-06-05 10:03 ` [PATCH v7 6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer Pawel Laszczak
2019-06-05 10:03   ` Pawel Laszczak
2019-06-06  1:12 ` [PATCH v7 0/6] Introduced new Cadence USBSS DRD Driver Lars Melin
2019-06-06  5:11   ` Pawel Laszczak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f032b3f3-409d-b0fc-8d5f-01c898b4c7a7@ti.com \
    --to=rogerq@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jbergsagel@ti.com \
    --cc=jpawar@cadence.com \
    --cc=kurahul@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=pawell@cadence.com \
    --cc=peter.chen@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=sureshp@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.