Re: [Intel-gfx] [PATCH] drm/i915/icl: Fix read of memory frequency

["Souza, Jose" <jose.souza@intel.com>]

On Fri, 2021-10-08 at 13:58 -0700, José Roberto de Souza wrote:
> All display 9 and display 10 platforms has only 4 bits for the memory
> frequency but display 11 platforms it changes to 8 bits.
> 
> Display 9 platforms has another register in bits 7:4 that prevents us
> to have a single mask.
> Also adding new mask with the current name in CRWebViewer, not
> sure why current mask is named like this.
> 
> Fixes: f8112cb9574b ("drm/i915/gen11+: Only load DRAM information from pcode")

Ops hash should be: 5d0c938ec9cc
Will fix in the next version or when applying.

> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h   | 1 +
>  drivers/gpu/drm/i915/intel_dram.c | 7 +++++--
>  2 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index a897f4abea0c3..041f7dc9e0d94 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -11148,6 +11148,7 @@ enum skl_power_gate {
>  #define SKL_MEMORY_FREQ_MULTIPLIER_HZ		266666666
>  #define SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5E04)
>  #define  SKL_REQ_DATA_MASK			(0xF << 0)
> +#define  ICL_FREQ_MASK				(0xFF << 0)
>  #define  DG1_GEAR_TYPE				REG_BIT(16)
>  
>  #define SKL_MAD_INTER_CHANNEL_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5000)
> diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
> index 30a0cab5eff46..558589b1202d6 100644
> --- a/drivers/gpu/drm/i915/intel_dram.c
> +++ b/drivers/gpu/drm/i915/intel_dram.c
> @@ -257,8 +257,11 @@ skl_get_dram_info(struct drm_i915_private *i915)
>  
>  	val = intel_uncore_read(&i915->uncore,
>  				SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
> -	mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) *
> -				    SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
> +	if (DISPLAY_VER(i915) == 11)
> +		val &= ICL_FREQ_MASK;
> +	else
> +		val &= SKL_REQ_DATA_MASK;
> +	mem_freq_khz = DIV_ROUND_UP(val * SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
>  
>  	if (dram_info->num_channels * mem_freq_khz == 0) {
>  		drm_info(&i915->drm,