From: Konrad Dybcio <konrad.dybcio@linaro.org> To: Neil Armstrong <neil.armstrong@linaro.org>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH 6/7] arm64: dts: qcom: sm8550-mtp: add pmic glink node Date: Mon, 30 Jan 2023 11:41:13 +0100 [thread overview] Message-ID: <f178793c-5e73-65d0-0daf-72f99b201d4e@linaro.org> (raw) In-Reply-To: <20230130-topic-sm8450-upstream-pmic-glink-v1-6-0b0acfad301e@linaro.org> On 30.01.2023 10:54, Neil Armstrong wrote: > Add the pmic glink node linked with the DWC3 USB controller > switched to OTG mode and tagged with usb-role-switch. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 34 ++++++++++++++++++++++++++++++++- > 1 file changed, 33 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > index 725d3bc3ee72..f054c11fe1f6 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > @@ -27,6 +27,31 @@ chosen { > stdout-path = "serial0:115200n8"; > }; > > + pmic-glink { > + compatible = "qcom,sm8450-pmic-glink", 8550? Otherwise same comments as for the previous patch Konrad "qcom,pmic-glink"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + pmic_glink_dwc3_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_out>; > + }; > + }; > + }; > + }; > + }; > + > vph_pwr: vph-pwr-regulator { > compatible = "regulator-fixed"; > regulator-name = "vph_pwr"; > @@ -546,7 +571,14 @@ &usb_1 { > }; > > &usb_1_dwc3 { > - dr_mode = "peripheral"; > + dr_mode = "otg"; > + usb-role-switch; > + > + port { > + usb_1_dwc3_out: endpoint { > + remote-endpoint = <&pmic_glink_dwc3_in>; > + }; > + }; > }; > > &usb_1_hsphy { >
WARNING: multiple messages have this Message-ID (diff)
From: Konrad Dybcio <konrad.dybcio@linaro.org> To: Neil Armstrong <neil.armstrong@linaro.org>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH 6/7] arm64: dts: qcom: sm8550-mtp: add pmic glink node Date: Mon, 30 Jan 2023 11:41:13 +0100 [thread overview] Message-ID: <f178793c-5e73-65d0-0daf-72f99b201d4e@linaro.org> (raw) In-Reply-To: <20230130-topic-sm8450-upstream-pmic-glink-v1-6-0b0acfad301e@linaro.org> On 30.01.2023 10:54, Neil Armstrong wrote: > Add the pmic glink node linked with the DWC3 USB controller > switched to OTG mode and tagged with usb-role-switch. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 34 ++++++++++++++++++++++++++++++++- > 1 file changed, 33 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > index 725d3bc3ee72..f054c11fe1f6 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > @@ -27,6 +27,31 @@ chosen { > stdout-path = "serial0:115200n8"; > }; > > + pmic-glink { > + compatible = "qcom,sm8450-pmic-glink", 8550? Otherwise same comments as for the previous patch Konrad "qcom,pmic-glink"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + pmic_glink_dwc3_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_out>; > + }; > + }; > + }; > + }; > + }; > + > vph_pwr: vph-pwr-regulator { > compatible = "regulator-fixed"; > regulator-name = "vph_pwr"; > @@ -546,7 +571,14 @@ &usb_1 { > }; > > &usb_1_dwc3 { > - dr_mode = "peripheral"; > + dr_mode = "otg"; > + usb-role-switch; > + > + port { > + usb_1_dwc3_out: endpoint { > + remote-endpoint = <&pmic_glink_dwc3_in>; > + }; > + }; > }; > > &usb_1_hsphy { > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-30 10:41 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-30 9:54 [PATCH 0/7] soc: qcom: add UCSI function to PMIC GLINK Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-01-30 9:54 ` [PATCH 1/7] usb: typec: ucsi: add PMIC Glink UCSI driver Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-01-31 9:16 ` Greg Kroah-Hartman 2023-01-31 9:16 ` Greg Kroah-Hartman 2023-02-10 10:31 ` Neil Armstrong 2023-02-10 10:31 ` Neil Armstrong 2023-02-10 10:38 ` Greg Kroah-Hartman 2023-02-10 10:38 ` Greg Kroah-Hartman 2023-02-10 10:44 ` Neil Armstrong 2023-02-10 10:44 ` Neil Armstrong 2023-02-10 11:01 ` Greg Kroah-Hartman 2023-02-10 11:01 ` Greg Kroah-Hartman 2023-02-10 15:00 ` Neil Armstrong 2023-02-10 15:00 ` Neil Armstrong 2023-01-30 9:54 ` [PATCH 2/7] dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-01-30 22:46 ` Rob Herring 2023-01-30 22:46 ` Rob Herring 2023-01-30 9:54 ` [PATCH 3/7] dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-01-30 22:46 ` Rob Herring 2023-01-30 22:46 ` Rob Herring 2023-01-30 9:54 ` [PATCH 4/7] soc: qcom: pmic_glink: register ucsi aux device Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-01-30 9:54 ` [PATCH 5/7] arm64: dts: qcom: sm8450-hdk: add pmic glink node Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-01-30 10:40 ` Konrad Dybcio 2023-01-30 10:40 ` Konrad Dybcio 2023-01-30 10:58 ` Neil Armstrong 2023-01-30 10:58 ` Neil Armstrong 2023-01-30 10:59 ` Konrad Dybcio 2023-01-30 10:59 ` Konrad Dybcio 2023-01-30 11:01 ` neil.armstrong 2023-01-30 11:01 ` neil.armstrong 2023-01-30 9:54 ` [PATCH 6/7] arm64: dts: qcom: sm8550-mtp: " Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-01-30 10:41 ` Konrad Dybcio [this message] 2023-01-30 10:41 ` Konrad Dybcio 2023-01-30 10:59 ` Neil Armstrong 2023-01-30 10:59 ` Neil Armstrong 2023-01-30 9:54 ` [PATCH 7/7] arm64: defconfig: add PMIC GLINK modules Neil Armstrong 2023-01-30 9:54 ` Neil Armstrong 2023-02-01 8:31 ` Krzysztof Kozlowski 2023-02-01 8:31 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=f178793c-5e73-65d0-0daf-72f99b201d4e@linaro.org \ --to=konrad.dybcio@linaro.org \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=heikki.krogerus@linux.intel.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=neil.armstrong@linaro.org \ --cc=robh+dt@kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.