* PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
@ 2024-01-18 12:57 Paul Menzel
2024-01-18 21:37 ` Christian A. Ehrhardt
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: Paul Menzel @ 2024-01-18 12:57 UTC (permalink / raw)
To: LKML
Cc: linux-input, linux-pm, Hans de Goede, Dell.Client.Kernel, regressions
[-- Attachment #1: Type: text/plain, Size: 1879 bytes --]
#regzbot introduced v6.6.11..v6.7
Dear Linux folks,
There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360
(Intel i7-7500U).
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0
06/02/2022
The PS/2 keyboard goes missing after S3 resume¹. The problem does not
happen with Linux 6.6.11.
[ 1.435071] i8042: PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.435409] i8042: Warning: Keylock active
[ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12
[…]
[ 1.439743] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
$ sudo libinput list-devices
[…]
Device: AT Translated Set 2 keyboard
Kernel: /dev/input/event0
Group: 15
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
`libinput list-devices` does not list the device after resuming from S3.
Some of the function keys, like brightness and airplane mode keys, still
work, as the events are probably transmitted over the embedded
controller or some other mechanism. An external USB keyboard also still
works.
I haven’t had time to further analyze this, but wanted to report it. No idea
Kind regards,
Paul
¹ s2idle is not working correctly on the device, in the sense, that
energy usage is very high in that state, and the full battery is at 20 %
after leaving it for eight hours.
[-- Attachment #2: 20240117–dell-xps-13-9360–linux-6.7-messages--after-s3-no-laptop-keyboard.txt --]
[-- Type: text/plain, Size: 134353 bytes --]
[ 0.057945] ... fixed-purpose events: 3
[ 0.057945] ... event mask: 000000070000000f
[ 0.057945] signal: max sigframe size: 2032
[ 0.057945] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.057945] rcu: Hierarchical SRCU implementation.
[ 0.057945] rcu: Max phase no-delay instances is 1000.
[ 0.057945] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.057945] smp: Bringing up secondary CPUs ...
[ 0.057945] smpboot: x86: Booting SMP configuration:
[ 0.057945] .... node #0, CPUs: #1 #2 #3
[ 0.057945] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.057945] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.057945] smp: Brought up 1 node, 4 CPUs
[ 0.057945] smpboot: Max logical packages: 1
[ 0.057945] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.078486] node 0 deferred pages initialised in 20ms
[ 0.078486] devtmpfs: initialized
[ 0.078486] x86/mm: Memory block size: 128MB
[ 0.082053] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.082053] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.084497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.084504] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.084546] pinctrl core: initialized pinctrl subsystem
[ 0.085033] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.085249] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.085364] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.085476] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.085509] audit: initializing netlink subsys (disabled)
[ 0.085525] audit: type=2000 audit(1705477361.028:1): state=initialized audit_enabled=0 res=1
[ 0.085525] thermal_sys: Registered thermal governor 'fair_share'
[ 0.085525] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.085525] thermal_sys: Registered thermal governor 'step_wise'
[ 0.085525] thermal_sys: Registered thermal governor 'user_space'
[ 0.085525] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.085525] cpuidle: using governor ladder
[ 0.085525] cpuidle: using governor menu
[ 0.085525] Simple Boot Flag at 0x47 set to 0x80
[ 0.085525] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.085525] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.085982] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.085986] PCI: not using MMCONFIG
[ 0.085987] PCI: Using configuration type 1 for base access
[ 0.086146] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.086152] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.086152] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.086152] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.086152] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.086152] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.086199] ACPI: Added _OSI(Module Device)
[ 0.086199] ACPI: Added _OSI(Processor Device)
[ 0.086199] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.086199] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.119600] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.124152] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.128477] ACPI: Dynamic OEM Table Load:
[ 0.128477] ACPI: SSDT 0xFFFFA07C816D6800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.130163] ACPI: Dynamic OEM Table Load:
[ 0.130168] ACPI: SSDT 0xFFFFA07C81755000 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.131732] ACPI: Dynamic OEM Table Load:
[ 0.131737] ACPI: SSDT 0xFFFFA07C81750000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.132901] ACPI: Dynamic OEM Table Load:
[ 0.132905] ACPI: SSDT 0xFFFFA07C81710200 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.135146] ACPI: _OSC evaluated successfully for all CPUs
[ 0.135272] ACPI: EC: EC started
[ 0.135273] ACPI: EC: interrupt blocked
[ 0.139853] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.139855] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.139856] ACPI: Interpreter enabled
[ 0.139892] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.139893] ACPI: Using IOAPIC for interrupt routing
[ 0.139926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.140616] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[ 0.140625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.140626] PCI: Using E820 reservations for host bridge windows
[ 0.141107] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.144452] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.144706] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.146048] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.146301] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.146546] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.146792] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.147392] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.147640] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.147889] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.148136] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.148388] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.148634] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.148880] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.149125] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.149373] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.149621] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.149868] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.150897] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.151146] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.151396] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.166659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.166665] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.166810] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.167077] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.167079] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.167869] PCI host bridge to bus 0000:00
[ 0.167871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.167873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.167875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.167876] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 0.167878] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.167879] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.167896] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.167962] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.167969] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.167975] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.167978] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.167990] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.168001] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.168130] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.168138] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit]
[ 0.168379] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.168393] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.168449] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.168890] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.168904] pci 0000:00:14.2: reg 0x10: [mem 0xdc334000-0xdc334fff 64bit]
[ 0.169042] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.169072] pci 0000:00:15.0: reg 0x10: [mem 0xdc333000-0xdc333fff 64bit]
[ 0.169401] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.169442] pci 0000:00:15.1: reg 0x10: [mem 0xdc332000-0xdc332fff 64bit]
[ 0.169753] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.169765] pci 0000:00:16.0: reg 0x10: [mem 0xdc331000-0xdc331fff 64bit]
[ 0.169809] pci 0000:00:16.0: PME# supported from D3hot
[ 0.170098] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.170138] pci 0000:00:1c.0: broken device, retraining non-functional downstream link at 2.5GT/s
[ 1.177947] pci 0000:00:1c.0: retraining failed
[ 1.177984] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.178003] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 1.178481] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 1.178566] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.178587] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 1.179061] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 1.179134] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.179152] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 1.179626] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 1.179963] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 1.179976] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff]
[ 1.180224] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[ 1.180244] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit]
[ 1.180270] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
[ 1.180316] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 1.180976] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 1.181035] pci 0000:00:1f.4: reg 0x10: [mem 0xdc330000-0xdc3300ff 64bit]
[ 1.181107] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 1.181458] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 1.181463] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 1.181468] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 1.181900] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000
[ 1.182057] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[ 1.183369] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 1.184966] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 1.184970] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 1.185046] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802
[ 1.185066] pci 0000:3b:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
[ 1.185172] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot
[ 1.185491] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 1.185495] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 1.188150] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 1.188150] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 1.188150] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 1.188150] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 1.188150] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 1.188150] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 1.188150] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 1.188150] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 1.198237] ACPI: EC: interrupt unblocked
[ 1.198239] ACPI: EC: event unblocked
[ 1.198244] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 1.198245] ACPI: EC: GPE=0x14
[ 1.198247] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 1.198249] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 1.198324] iommu: Default domain type: Translated
[ 1.198324] iommu: DMA domain TLB invalidation policy: lazy mode
[ 1.198324] pps_core: LinuxPPS API ver. 1 registered
[ 1.198324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.198324] PTP clock support registered
[ 1.198324] EDAC MC: Ver: 3.0.0
[ 1.198772] efivars: Registered efivars operations
[ 1.198772] NetLabel: Initializing
[ 1.198772] NetLabel: domain hash size = 128
[ 1.198772] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.198772] NetLabel: unlabeled traffic allowed by default
[ 1.198772] PCI: Using ACPI for IRQ routing
[ 1.224539] PCI: pci_cache_line_size set to 64 bytes
[ 1.224923] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 1.224925] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.224926] e820: reserve RAM buffer [mem 0x4ea13018-0x4fffffff]
[ 1.224927] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 1.224928] e820: reserve RAM buffer [mem 0x62264000-0x63ffffff]
[ 1.224929] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 1.224930] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 1.224931] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 1.224965] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.224965] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.224965] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.224965] vgaarb: loaded
[ 1.224965] clocksource: Switched to clocksource tsc-early
[ 1.224965] VFS: Disk quotas dquot_6.6.0
[ 1.224965] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.224965] AppArmor: AppArmor Filesystem Enabled
[ 1.224965] pnp: PnP ACPI init
[ 1.224965] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.224965] system 00:00: [io 0xffff] has been reserved
[ 1.224965] system 00:00: [io 0xffff] has been reserved
[ 1.224965] system 00:00: [io 0xffff] has been reserved
[ 1.224965] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 1.224965] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.224965] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.224965] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.224965] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.224965] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.224965] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.224965] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.224965] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.224965] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.224965] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 1.224965] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.224965] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 1.224965] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 1.224965] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 1.224965] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 1.224965] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 1.224965] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 1.224965] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 1.224965] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 1.224965] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 1.224965] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 1.224965] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 1.227111] pnp: PnP ACPI: found 9 devices
[ 1.232790] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.232843] NET: Registered PF_INET protocol family
[ 1.232964] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.235256] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 1.235277] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.235337] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.235520] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 1.235709] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.235774] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 1.235824] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.235855] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.235907] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.235913] NET: Registered PF_XDP protocol family
[ 1.235920] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 1.235929] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.235932] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 1.235935] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.235938] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 1.235941] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 1.235945] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 1.235949] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 1.235956] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 1.235959] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 1.235964] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.235966] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.235967] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 1.235969] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 1.235970] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 1.235971] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.235973] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 1.235974] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 1.235976] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 1.235981] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 1.236555] PCI: CLS 0 bytes, default 64
[ 1.236566] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 1.236569] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 1.236578] DMAR: No ATSR found
[ 1.236579] DMAR: No SATC found
[ 1.236580] DMAR: IOMMU feature fl1gp_support inconsistent
[ 1.236581] DMAR: IOMMU feature pgsel_inv inconsistent
[ 1.236582] DMAR: IOMMU feature nwfs inconsistent
[ 1.236583] DMAR: IOMMU feature pasid inconsistent
[ 1.236584] DMAR: IOMMU feature eafs inconsistent
[ 1.236585] DMAR: IOMMU feature prs inconsistent
[ 1.236585] DMAR: IOMMU feature nest inconsistent
[ 1.236586] DMAR: IOMMU feature mts inconsistent
[ 1.236587] DMAR: IOMMU feature sc_support inconsistent
[ 1.236587] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 1.236589] DMAR: dmar0: Using Queued invalidation
[ 1.236592] DMAR: dmar1: Using Queued invalidation
[ 1.236623] Trying to unpack rootfs image as initramfs...
[ 1.236887] pci 0000:00:02.0: Adding to iommu group 0
[ 1.236929] pci 0000:00:00.0: Adding to iommu group 1
[ 1.236939] pci 0000:00:04.0: Adding to iommu group 2
[ 1.236954] pci 0000:00:14.0: Adding to iommu group 3
[ 1.236962] pci 0000:00:14.2: Adding to iommu group 3
[ 1.236976] pci 0000:00:15.0: Adding to iommu group 4
[ 1.236989] pci 0000:00:15.1: Adding to iommu group 4
[ 1.237002] pci 0000:00:16.0: Adding to iommu group 5
[ 1.237015] pci 0000:00:1c.0: Adding to iommu group 6
[ 1.237026] pci 0000:00:1c.4: Adding to iommu group 7
[ 1.237037] pci 0000:00:1d.0: Adding to iommu group 8
[ 1.237056] pci 0000:00:1f.0: Adding to iommu group 9
[ 1.237065] pci 0000:00:1f.2: Adding to iommu group 9
[ 1.237074] pci 0000:00:1f.3: Adding to iommu group 9
[ 1.237083] pci 0000:00:1f.4: Adding to iommu group 9
[ 1.237094] pci 0000:3a:00.0: Adding to iommu group 10
[ 1.237105] pci 0000:3b:00.0: Adding to iommu group 11
[ 1.237980] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.237983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.237984] software IO TLB: mapped [mem 0x000000005e264000-0x0000000062264000] (64MB)
[ 1.238089] sgx: EPC section 0x70200000-0x75f7ffff
[ 1.238894] Initialise system trusted keyrings
[ 1.238904] Key type blacklist registered
[ 1.238978] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.239003] zbud: loaded
[ 1.239243] fuse: init (API version 7.39)
[ 1.239520] integrity: Platform Keyring initialized
[ 1.239530] integrity: Machine keyring initialized
[ 1.239533] Key type asymmetric registered
[ 1.239536] Asymmetric key parser 'x509' registered
[ 1.369406] Freeing initrd memory: 60468K
[ 1.373450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.373488] io scheduler mq-deadline registered
[ 1.374630] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.374655] efifb: probing for efifb
[ 1.374671] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 1.374672] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 1.374674] efifb: scrolling: redraw
[ 1.374674] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.374758] Console: switching to colour frame buffer device 200x56
[ 1.378244] fb0: EFI VGA frame buffer device
[ 1.380312] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.380314] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 1.380481] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.381100] hpet_acpi_add: no address or irqs in _CRS
[ 1.381119] Linux agpgart interface v0.103
[ 1.393500] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 1.435071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.435409] i8042: Warning: Keylock active
[ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.437785] mousedev: PS/2 mouse device common for all mice
[ 1.437810] rtc_cmos 00:01: RTC can wake from S4
[ 1.438536] rtc_cmos 00:01: registered as rtc0
[ 1.438679] rtc_cmos 00:01: setting system clock to 2024-01-17T07:42:42 UTC (1705477362)
[ 1.438706] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 1.438840] intel_pstate: Intel P-state driver initializing
[ 1.439016] intel_pstate: HWP enabled
[ 1.439207] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.439743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.454996] NET: Registered PF_INET6 protocol family
[ 1.460695] Segment Routing with IPv6
[ 1.460709] In-situ OAM (IOAM) with IPv6
[ 1.460741] mip6: Mobile IPv6
[ 1.460746] NET: Registered PF_PACKET protocol family
[ 1.460814] mpls_gso: MPLS GSO support
[ 1.461185] microcode: Current revision: 0x000000f4
[ 1.461187] microcode: Updated early from: 0x000000f0
[ 1.461375] IPI shorthand broadcast: enabled
[ 1.462832] sched_clock: Marking stable (1456002483, 5993138)->(1496650333, -34654712)
[ 1.463013] registered taskstats version 1
[ 1.463094] Loading compiled-in X.509 certificates
[ 1.481091] Loaded X.509 cert 'Build time autogenerated kernel key: 45375d97a88689d31f3746ef65fc2b509cef42c6'
[ 1.482720] Key type .fscrypt registered
[ 1.482721] Key type fscrypt-provisioning registered
[ 1.489056] cryptd: max_cpu_qlen set to 1000
[ 1.495250] AVX2 version of gcm_enc/dec engaged.
[ 1.495276] AES CTR mode by8 optimization enabled
[ 1.519129] Key type encrypted registered
[ 1.519139] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.519373] integrity: Loading X.509 certificate: UEFI:db
[ 1.519392] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 1.519394] integrity: Loading X.509 certificate: UEFI:db
[ 1.519413] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.519414] integrity: Loading X.509 certificate: UEFI:db
[ 1.519428] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.519728] ima: Allocated hash algorithm: sha256
[ 1.562278] ima: No architecture policies found
[ 1.562304] evm: Initialising EVM extended attributes:
[ 1.562306] evm: security.selinux
[ 1.562307] evm: security.SMACK64 (disabled)
[ 1.562308] evm: security.SMACK64EXEC (disabled)
[ 1.562309] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.562310] evm: security.SMACK64MMAP (disabled)
[ 1.562311] evm: security.apparmor
[ 1.562312] evm: security.ima
[ 1.562312] evm: security.capability
[ 1.562313] evm: HMAC attrs: 0x1
[ 1.673170] RAS: Correctable Errors collector initialized.
[ 1.673231] clk: Disabling unused clocks
[ 1.674070] Freeing unused decrypted memory: 2028K
[ 1.674505] Freeing unused kernel image (initmem) memory: 3992K
[ 1.690259] Write protecting the kernel read-only data: 28672k
[ 1.690837] Freeing unused kernel image (rodata/data gap) memory: 1636K
[ 1.734806] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.734808] x86/mm: Checking user space page tables
[ 1.776965] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.776970] Run /init as init process
[ 1.776971] with arguments:
[ 1.776972] /init
[ 1.776973] with environment:
[ 1.776973] HOME=/
[ 1.776974] TERM=linux
[ 1.776975] BOOT_IMAGE=/vmlinuz-6.7-amd64
[ 1.956723] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 1.971582] hid: raw HID events driver (C) Jiri Kosina
[ 1.995425] ACPI: bus type USB registered
[ 1.995563] usbcore: registered new interface driver usbfs
[ 1.995604] usbcore: registered new interface driver hub
[ 1.995623] usbcore: registered new device driver usb
[ 2.006038] ACPI: battery: Slot [BAT0] (battery present)
[ 2.010057] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.010097] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.010163] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000
[ 2.010222] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
[ 2.010452] pci 0000:00:1f.1: Adding to iommu group 12
[ 2.011872] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 2.012107] platform idma64.0: Adding to iommu group 12
[ 2.012212] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.012684] platform i2c_designware.0: Adding to iommu group 13
[ 2.030137] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 2.030401] platform idma64.1: Adding to iommu group 14
[ 2.030529] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.030555] platform i2c_designware.1: Adding to iommu group 15
[ 2.034268] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 2.055847] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.055856] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.056152] ACPI: bus type drm_connector registered
[ 2.057008] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 2.057424] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.057429] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.057433] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.057770] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 2.057774] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.057776] usb usb1: Product: xHCI Host Controller
[ 2.057778] usb usb1: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 2.057779] usb usb1: SerialNumber: 0000:00:14.0
[ 2.059335] hub 1-0:1.0: USB hub found
[ 2.059352] hub 1-0:1.0: 12 ports detected
[ 2.061634] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 2.061638] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.061640] usb usb2: Product: xHCI Host Controller
[ 2.061642] usb usb2: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 2.061643] usb usb2: SerialNumber: 0000:00:14.0
[ 2.061759] hub 2-0:1.0: USB hub found
[ 2.061772] hub 2-0:1.0: 6 ports detected
[ 2.062232] usb: port power management may be unreliable
[ 2.227988] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2
[ 2.228309] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3
[ 2.228631] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 2.258046] tsc: Refined TSC clocksource calibration: 2904.009 MHz
[ 2.258067] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0e73964, max_idle_ns: 440795294805 ns
[ 2.260546] clocksource: Switched to clocksource tsc
[ 2.273083] nvme nvme0: pci function 0000:3b:00.0
[ 2.291694] nvme nvme0: 4/0/0 default/read/poll queues
[ 2.298899] nvme0n1: p1 p2 p3 p4
[ 2.318236] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 2.468183] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 2.468201] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.598243] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 2.748907] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 2.748929] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 2.748939] usb 1-4: Product: Touchscreen
[ 2.748946] usb 1-4: Manufacturer: ELAN
[ 2.878274] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 3.087363] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 3.087384] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.087394] usb 1-5: Product: Integrated_Webcam_HD
[ 3.087401] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 3.116367] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input5
[ 3.116445] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input6
[ 3.116468] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input7
[ 3.116564] hid-generic 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 3.116608] usbcore: registered new interface driver usbhid
[ 3.116610] usbhid: USB HID core driver
[ 3.149280] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 3.149331] device-mapper: uevent: version 1.0.3
[ 3.149453] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 55.847456] PM: Image not found (code -22)
[ 55.989997] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 56.034263] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 56.138065] systemd[1]: Inserted module 'autofs4'
[ 56.185281] systemd[1]: systemd 255.2-4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 56.185311] systemd[1]: Detected architecture x86-64.
[ 56.187070] systemd[1]: Hostname set to <abreu>.
[ 56.376359] systemd[1]: Queued start job for default target graphical.target.
[ 56.415311] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 56.415894] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 56.416415] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 56.416930] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 56.417260] systemd[1]: Created slice user.slice - User and Session Slice.
[ 56.417358] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 56.417437] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 56.417699] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 56.417733] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 56.417746] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 56.417760] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 56.417771] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 56.417823] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 56.417867] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 56.417893] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 56.417924] systemd[1]: Reached target slices.target - Slice Units.
[ 56.417984] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 56.419559] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 56.419691] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 56.419765] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 56.419916] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 56.420082] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 56.420125] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 56.420504] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 56.420645] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 56.422100] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 56.423384] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 56.424968] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 56.430185] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 56.434610] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 56.438858] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 56.441228] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 56.444644] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 56.447411] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 56.454228] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 56.456800] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 56.462247] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 56.462389] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 56.466205] pstore: Using crash dump compression: deflate
[ 56.466301] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 56.473974] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 56.474172] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 56.474577] pstore: Registered efi_pstore as persistent store backend
[ 56.478210] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 56.478315] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 56.482259] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 56.484781] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 56.484944] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 56.485072] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 56.485210] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 56.485634] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 56.486015] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 56.486418] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 56.486496] loop: module loaded
[ 56.486618] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 56.487068] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 56.487246] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 56.487703] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 56.487884] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 56.488254] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 56.488432] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 56.488833] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 56.489016] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 56.489406] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 56.489593] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 56.494142] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 56.496963] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 56.497045] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 56.498823] systemd-journald[431]: Collecting audit messages is disabled.
[ 56.498897] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 56.502528] lp: driver loaded but no devices found
[ 56.506413] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 56.508606] ppdev: user-space parallel port driver
[ 56.509572] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 56.523488] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[ 56.524940] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 56.525928] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 56.526234] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 56.527824] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 56.527860] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 56.528290] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 56.528676] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 56.534208] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 56.534286] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 56.538226] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 56.555225] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 56.555635] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 56.556914] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 56.556992] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 56.557970] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 56.564951] systemd[1]: Started systemd-journald.service - Journal Service.
[ 56.580859] systemd-journald[431]: Received client request to flush runtime journal.
[ 56.594528] systemd-journald[431]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/system.journal: Journal file uses a different sequence number ID, rotating.
[ 56.594537] systemd-journald[431]: Rotating system journal.
[ 56.799051] ACPI: AC: AC Adapter [AC] (on-line)
[ 56.804121] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[ 56.809039] intel_pmc_core INT33A1:00: initialized
[ 56.813693] input: Intel HID events as /devices/platform/INT33D5:00/input/input10
[ 56.829271] Consider using thermal netlink events interface
[ 56.853169] intel-hid INT33D5:00: platform supports 5 button array
[ 56.861150] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input11
[ 56.863972] ACPI: button: Lid Switch [LID0]
[ 56.864732] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 56.868954] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12
[ 56.872080] intel_rapl_common: Found RAPL domain package
[ 56.872083] intel_rapl_common: Found RAPL domain dram
[ 56.883122] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input13
[ 56.919266] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input15
[ 56.923795] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input16
[ 56.925561] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 56.932032] ACPI: button: Power Button [PBTN]
[ 56.935362] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 56.942593] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input18
[ 56.942683] ACPI: button: Sleep Button [SBTN]
[ 56.942749] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input19
[ 56.942826] ACPI: button: Power Button [PWRF]
[ 56.972952] mc: Linux media interface: v0.10
[ 56.999854] input: PC Speaker as /devices/platform/pcspkr/input/input20
[ 57.010719] iTCO_vendor_support: vendor-support=0
[ 57.017259] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 57.032814] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 57.060372] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 57.079065] videodev: Linux video capture interface: v2.00
[ 57.091298] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 57.095956] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input21
[ 57.100419] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 57.121424] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 57.121428] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 57.121429] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 57.121431] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 57.121432] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 57.121433] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 57.121802] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input22
[ 57.122175] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input23
[ 57.126014] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 57.150346] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input24
[ 57.202113] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 57.225565] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 57.292754] intel_rapl_common: Found RAPL domain package
[ 57.292757] intel_rapl_common: Found RAPL domain core
[ 57.292759] intel_rapl_common: Found RAPL domain uncore
[ 57.292760] intel_rapl_common: Found RAPL domain dram
[ 57.292761] intel_rapl_common: Found RAPL domain psys
[ 57.293819] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 57.298127] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 57.298355] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 57.298567] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 57.298777] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 57.308862] usbcore: registered new interface driver uvcvideo
[ 57.320287] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 57.323280] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 57.815056] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 57.815542] Console: switching to colour dummy device 80x25
[ 57.815660] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 57.815715] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 57.823619] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 57.823636] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 57.824050] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 57.825485] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 57.836287] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 57.838714] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 57.839079] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 57.841591] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 57.963740] Bluetooth: Core ver 2.22
[ 57.963760] NET: Registered PF_BLUETOOTH protocol family
[ 57.963761] Bluetooth: HCI device and connection manager initialized
[ 57.963765] Bluetooth: HCI socket layer initialized
[ 57.963767] Bluetooth: L2CAP socket layer initialized
[ 57.963770] Bluetooth: SCO socket layer initialized
[ 57.969332] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 57.985329] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 57.993881] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 58.029454] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[ 58.036367] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 58.037085] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26
[ 58.038855] i915 display info: display version: 9
[ 58.038859] i915 display info: cursor_needs_physical: no
[ 58.038861] i915 display info: has_cdclk_crawl: no
[ 58.038862] i915 display info: has_cdclk_squash: no
[ 58.038864] i915 display info: has_ddi: yes
[ 58.038865] i915 display info: has_dp_mst: yes
[ 58.038866] i915 display info: has_dsb: no
[ 58.038867] i915 display info: has_fpga_dbg: yes
[ 58.038869] i915 display info: has_gmch: no
[ 58.038870] i915 display info: has_hotplug: yes
[ 58.038871] i915 display info: has_hti: no
[ 58.038872] i915 display info: has_ipc: yes
[ 58.038873] i915 display info: has_overlay: no
[ 58.038874] i915 display info: has_psr: yes
[ 58.038875] i915 display info: has_psr_hw_tracking: yes
[ 58.038877] i915 display info: overlay_needs_physical: no
[ 58.038878] i915 display info: supports_tv: no
[ 58.038879] i915 display info: has_hdcp: yes
[ 58.038880] i915 display info: has_dmc: yes
[ 58.038881] i915 display info: has_dsc: no
[ 58.041315] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 58.041540] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 58.052302] fbcon: i915drmfb (fb0) is primary device
[ 58.059298] Console: switching to colour frame buffer device 200x56
[ 58.080147] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 58.132204] audit: type=1400 audit(1705477419.189:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=662 comm="apparmor_parser"
[ 58.134368] audit: type=1400 audit(1705477419.189:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=663 comm="apparmor_parser"
[ 58.134372] audit: type=1400 audit(1705477419.189:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=663 comm="apparmor_parser"
[ 58.134999] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 58.139041] audit: type=1400 audit(1705477419.197:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser"
[ 58.139044] audit: type=1400 audit(1705477419.197:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=664 comm="apparmor_parser"
[ 58.139045] audit: type=1400 audit(1705477419.197:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser"
[ 58.139046] audit: type=1400 audit(1705477419.197:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=664 comm="apparmor_parser"
[ 58.145064] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 58.155759] audit: type=1400 audit(1705477419.213:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=683 comm="apparmor_parser"
[ 58.157411] audit: type=1400 audit(1705477419.213:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=682 comm="apparmor_parser"
[ 58.158683] audit: type=1400 audit(1705477419.217:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=680 comm="apparmor_parser"
[ 58.195963] usbcore: registered new interface driver btusb
[ 58.204572] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[ 58.204907] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 58.204910] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 58.211974] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 58.211982] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 58.211985] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 58.211987] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 58.211989] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 58.211991] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 58.211993] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 58.211995] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 58.309005] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 58.309090] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 58.309167] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 58.309464] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 58.309585] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 58.423369] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 58.423400] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 58.423435] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 58.423472] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 58.423497] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 58.427221] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
[ 58.430294] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 58.430300] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 58.430721] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c
[ 58.511554] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
[ 58.515305] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 58.566407] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[ 58.566442] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 58.599769] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 58.620587] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 58.675686] NET: Registered PF_QIPCRTR protocol family
[ 58.705824] ath: EEPROM regdomain: 0x6c
[ 58.705828] ath: EEPROM indicates we should expect a direct regpair map
[ 58.705829] ath: Country alpha2 being used: 00
[ 58.705830] ath: Regpair used: 0x6c
[ 58.719598] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 61.269789] rfkill: input handler disabled
[ 64.479985] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 64.479991] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 64.483461] wlp58s0: authenticated
[ 64.486134] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 64.520571] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3)
[ 64.524227] wlp58s0: associated
[ 64.602617] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 64.799399] PPP generic driver version 2.4.2
[ 64.804802] NET: Registered PF_PPPOX protocol family
[ 64.814975] Initializing XFRM netlink socket
[ 64.826360] l2tp_core: L2TP core driver, V2.0
[ 64.829835] l2tp_netlink: L2TP netlink interface
[ 64.831076] IPsec XFRM device driver
[ 64.834626] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 67.171757] systemd-journald[431]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/user-5272.journal: Journal file uses a different sequence number ID, rotating.
[ 67.569594] rfkill: input handler enabled
[ 70.450226] rfkill: input handler disabled
[ 80.286449] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400
[ 80.286529] pci 0000:01:00.0: enabling Extended Tags
[ 80.286766] pci 0000:01:00.0: supports D1 D2
[ 80.286767] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 80.286912] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 80.389984] pci 0000:01:00.0: Adding to iommu group 16
[ 80.390308] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
[ 80.390400] pci 0000:02:00.0: enabling Extended Tags
[ 80.391492] pci 0000:02:00.0: supports D1 D2
[ 80.391642] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 80.392869] pci 0000:02:00.0: Adding to iommu group 17
[ 80.393004] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400
[ 80.393092] pci 0000:02:01.0: enabling Extended Tags
[ 80.393575] pci 0000:02:01.0: supports D1 D2
[ 80.393577] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 80.393981] pci 0000:02:01.0: Adding to iommu group 18
[ 80.394148] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400
[ 80.394247] pci 0000:02:02.0: enabling Extended Tags
[ 80.394393] pci 0000:02:02.0: supports D1 D2
[ 80.394395] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 80.395567] pci 0000:02:02.0: Adding to iommu group 19
[ 80.395713] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 80.395727] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 80.395737] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 80.395813] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 80.395826] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 80.396783] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 80.396798] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 80.396809] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 80.398903] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330
[ 80.398938] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff]
[ 80.399054] pci 0000:39:00.0: enabling Extended Tags
[ 80.399228] pci 0000:39:00.0: supports D1 D2
[ 80.399230] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 80.399394] pci 0000:39:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 80.400666] pci 0000:39:00.0: Adding to iommu group 19
[ 80.400759] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 80.400774] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 80.400820] pci_bus 0000:02: Allocating resources
[ 80.400842] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 80.400846] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 80.400849] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 80.400852] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 80.400856] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 80.400859] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 80.400861] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 80.400863] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 80.400868] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 80.400870] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 80.400872] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 80.400874] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 80.400876] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 80.400878] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 80.400881] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 80.400883] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 80.400885] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 80.400887] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 80.400888] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 80.400890] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 80.400893] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 80.400900] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 80.400913] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 80.400921] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 80.400926] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 80.400936] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 80.400942] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 80.400954] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 80.400960] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 80.400965] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 80.402280] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 80.402289] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 80.403532] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 80.403887] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 80.403892] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 80.403896] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 80.403947] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 80.403951] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 80.403953] usb usb3: Product: xHCI Host Controller
[ 80.403955] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 80.403957] usb usb3: SerialNumber: 0000:39:00.0
[ 80.404384] hub 3-0:1.0: USB hub found
[ 80.404397] hub 3-0:1.0: 2 ports detected
[ 80.404906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 80.404909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 80.404912] usb usb4: Product: xHCI Host Controller
[ 80.404914] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 80.404916] usb usb4: SerialNumber: 0000:39:00.0
[ 80.405360] hub 4-0:1.0: USB hub found
[ 80.405371] hub 4-0:1.0: 2 ports detected
[ 80.418060] pci_bus 0000:02: Allocating resources
[ 80.418083] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 80.418087] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 80.418090] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 80.418093] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 80.418096] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 80.418098] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 80.418100] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 80.418101] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 80.418105] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 80.418107] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 80.418108] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 80.418110] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 80.418111] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 80.418112] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 80.418114] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 80.418116] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 80.418117] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 80.418118] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 80.418120] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 80.418121] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 80.658037] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 80.808271] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 80.808276] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 80.808278] usb 3-1: Product: USB2.0 Hub
[ 80.808279] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 80.808280] usb 3-1: SerialNumber: 000000000
[ 80.809929] hub 3-1:1.0: USB hub found
[ 80.810058] hub 3-1:1.0: 5 ports detected
[ 80.934182] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 80.982762] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 80.982767] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 80.982769] usb 4-1: Product: USB3.0 Hub
[ 80.982770] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 80.982772] usb 4-1: SerialNumber: 000000000
[ 80.984331] hub 4-1:1.0: USB hub found
[ 80.984432] hub 4-1:1.0: 4 ports detected
[ 81.096445] Registered IR keymap rc-cec
[ 81.096497] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0
[ 81.096542] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input32
[ 81.530044] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 81.680620] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 81.680625] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 81.680627] usb 3-1.1: Product: USB2.0 Hub
[ 81.680629] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[ 81.680630] usb 3-1.1: SerialNumber: 000000000
[ 81.681966] hub 3-1.1:1.0: USB hub found
[ 81.682123] hub 3-1.1:1.0: 4 ports detected
[ 82.066039] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 82.152111] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 82.152116] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 82.152117] usb 4-1.1: Product: USB3.0 Hub
[ 82.152118] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[ 82.152120] usb 4-1.1: SerialNumber: 000000000
[ 82.154080] hub 4-1.1:1.0: USB hub found
[ 82.154260] hub 4-1.1:1.0: 4 ports detected
[ 82.334145] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 82.355930] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 82.355935] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 82.355936] usb 4-1.4: Product: Mass Storage Device
[ 82.355938] usb 4-1.4: Manufacturer: Generic
[ 82.355939] usb 4-1.4: SerialNumber: 058F84688461
[ 82.405762] SCSI subsystem initialized
[ 82.419503] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[ 82.419665] scsi host0: usb-storage 4-1.4:1.0
[ 82.419792] usbcore: registered new interface driver usb-storage
[ 82.425836] usbcore: registered new interface driver uas
[ 82.698062] usb 3-1.1.2: new high-speed USB device number 4 using xhci_hcd
[ 82.814754] usb 3-1.1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[ 82.814759] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 82.814761] usb 3-1.1.2: Product: 4-Port USB 2.0 Hub
[ 82.814762] usb 3-1.1.2: Manufacturer: Generic
[ 82.817241] hub 3-1.1.2:1.0: USB hub found
[ 82.818405] hub 3-1.1.2:1.0: 4 ports detected
[ 82.883046] usb 4-1.1.2: new SuperSpeed USB device number 5 using xhci_hcd
[ 82.919229] usb 4-1.1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[ 82.919242] usb 4-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 82.919247] usb 4-1.1.2: Product: 4-Port USB 3.0 Hub
[ 82.919250] usb 4-1.1.2: Manufacturer: Generic
[ 82.927399] hub 4-1.1.2:1.0: USB hub found
[ 82.928838] hub 4-1.1.2:1.0: 2 ports detected
[ 83.674044] usb 3-1.1.2.3: new low-speed USB device number 6 using xhci_hcd
[ 83.782726] usb 3-1.1.2.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[ 83.782730] usb 3-1.1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 83.782732] usb 3-1.1.2.3: Product: USB Optical Mouse
[ 83.792074] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.3/3-1.1.2.3:1.0/0003:1BCF:0005.0003/input/input33
[ 83.792196] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.1.2.3/input0
[ 83.858146] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[ 83.879073] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 83.879078] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 83.879080] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[ 83.879081] usb 4-1.1.3: Manufacturer: Realtek
[ 83.879082] usb 4-1.1.3: SerialNumber: 000001
[ 84.206427] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd
[ 84.243036] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 84.255865] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 84.264027] usbcore: registered new device driver r8152-cfgselector
[ 84.268852] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 84.269164] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 84.310115] usb 3-1.1.2.4: new low-speed USB device number 7 using xhci_hcd
[ 84.421108] usb 3-1.1.2.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[ 84.421115] usb 3-1.1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 84.421117] usb 3-1.1.2.4: Product: Dell KB216 Wired Keyboard
[ 84.431903] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.0/0003:413C:2113.0004/input/input34
[ 84.490305] hid-generic 0003:413C:2113.0004: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input0
[ 84.494409] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[ 84.494738] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0005/input/input35
[ 84.498066] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[ 84.532036] r8152 4-1.1.3:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw
[ 84.550145] r8152 4-1.1.3:1.0: load rtl8153a-4 v2 02/07/20 successfully
[ 84.554139] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0005/input/input36
[ 84.554225] hid-generic 0003:413C:2113.0005: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input1
[ 84.583730] r8152 4-1.1.3:1.0 eth0: v1.12.13
[ 84.583770] usbcore: registered new interface driver r8152
[ 84.624572] usbcore: registered new interface driver cdc_ether
[ 84.628095] usbcore: registered new interface driver r8153_ecm
[ 84.702354] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[ 85.494016] usb 3-1.5: new high-speed USB device number 8 using xhci_hcd
[ 85.594977] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 85.594983] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 85.594986] usb 3-1.5: Product: USB Billboard Device
[ 85.594988] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[ 85.594989] usb 3-1.5: SerialNumber: 0000000000000001
[ 87.605105] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[ 89.618027] ucsi_acpi USBC000:00: GET_CONNECTOR_STATUS failed (-110)
[ 94.994027] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[ 96.168848] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[ 174.195104] sctp: Hash tables configured (bind 256/256)
[ 4290.445120] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[ 4293.578906] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[ 7461.281578] usb 4-1.1.2: USB disconnect, device number 5
[ 7461.377506] usb 3-1.1.2: USB disconnect, device number 4
[ 7461.377512] usb 3-1.1.2.3: USB disconnect, device number 6
[ 7461.433767] usb 3-1.1.2.4: USB disconnect, device number 7
[ 7485.597024] PM: suspend entry (deep)
[ 7485.602142] Filesystems sync: 0.005 seconds
[ 7485.602264] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 7485.602335] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 7485.602370] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 7485.602395] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[ 7485.602397] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[ 7485.604675] Freezing user space processes
[ 7485.607051] Freezing user space processes completed (elapsed 0.002 seconds)
[ 7485.607054] OOM killer disabled.
[ 7485.607055] Freezing remaining freezable tasks
[ 7485.608070] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 7485.608116] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7486.165630] ACPI: EC: interrupt blocked
[ 7486.204206] ACPI: PM: Preparing to enter system sleep state S3
[ 7486.217028] ACPI: EC: event blocked
[ 7486.217032] ACPI: EC: EC stopped
[ 7486.217034] ACPI: PM: Saving platform NVS memory
[ 7486.220503] Disabling non-boot CPUs ...
[ 7486.222670] smpboot: CPU 1 is now offline
[ 7486.227679] smpboot: CPU 2 is now offline
[ 7486.233604] smpboot: CPU 3 is now offline
[ 7486.244591] ACPI: PM: Low-level resume complete
[ 7486.244631] ACPI: EC: EC started
[ 7486.244632] ACPI: PM: Restoring platform NVS memory
[ 7486.246719] Enabling non-boot CPUs ...
[ 7486.246751] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7486.247465] CPU1 is up
[ 7486.247484] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7486.248232] CPU2 is up
[ 7486.248250] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7486.248930] CPU3 is up
[ 7486.251774] ACPI: PM: Waking up from system sleep state S3
[ 7486.555872] ACPI: EC: interrupt unblocked
[ 7486.556051] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 7486.556062] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 7486.556067] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 7486.558602] pcieport 0000:01:00.0: Unable to change power state from unknown to D0, device inaccessible
[ 7486.562612] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 7486.562614] pcieport 0000:02:02.0: Unable to change power state from unknown to D0, device inaccessible
[ 7486.564617] pcieport 0000:02:01.0: Unable to change power state from unknown to D0, device inaccessible
[ 7486.566243] xhci_hcd 0000:39:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 7486.629505] ACPI: EC: event unblocked
[ 7486.630417] xhci_hcd 0000:39:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 7486.630432] xhci_hcd 0000:39:00.0: Controller not ready at resume -19
[ 7486.630434] xhci_hcd 0000:39:00.0: PCI post-resume error -19!
[ 7486.630435] xhci_hcd 0000:39:00.0: HC died; cleaning up
[ 7486.630448] xhci_hcd 0000:39:00.0: PM: dpm_run_callback(): pci_pm_resume+0x0/0xf0 returns -19
[ 7486.630454] xhci_hcd 0000:39:00.0: PM: failed to resume async: error -19
[ 7486.639864] nvme nvme0: 4/0/0 default/read/poll queues
[ 7486.647173] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7486.663178] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7486.677210] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7486.948796] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 7487.040106] ------------[ cut here ]------------
[ 7487.040108] refcount_t: underflow; use-after-free.
[ 7487.040117] WARNING: CPU: 2 PID: 54815 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
[ 7487.040123] Modules linked in: sctp libcrc32c typec_displayport r8153_ecm cdc_ether usbnet sd_mod r8152 sg mii uas usb_storage scsi_mod scsi_common l2tp_ppp xfrm_interface l2tp_netlink xfrm6_tunnel l2tp_core tunnel6 tunnel4 ip6_udp_tunnel xfrm_user udp_tunnel xfrm_algo pppox ppp_generic slhc ctr ccm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device qrtr snd_sof_pci_intel_skl snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation snd_hda_codec_hdmi snd_sof_intel_hda_mlink soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof snd_sof_utils soundwire_bus snd_ctl_led snd_soc_avs snd_soc_hda_codec snd_soc_skl snd_hda_codec_realtek snd_soc_hdac_hda ath10k_pci snd_hda_ext_core binfmt_misc snd_hda_codec_generic ath10k_core btusb snd_soc_sst_ipc btrtl snd_soc_sst_dsp snd_soc_acpi_intel_match btintel nls_ascii btbcm nls_cp437 ath snd_soc_acpi btmtk mac80211 vfat bluetooth snd_soc_core x86_pkg_temp_thermal fat intel_powerclamp coretemp kvm_intel snd_compress snd_pcm_dmaengine dell_laptop
[ 7487.040173] snd_hda_intel mei_pxp mei_hdcp mei_wdt i915 ledtrig_audio snd_intel_dspcfg libarc4 snd_intel_sdw_acpi kvm intel_rapl_msr snd_hda_codec sha3_generic joydev jitterentropy_rng dell_smm_hwmon uvcvideo snd_hda_core cfg80211 videobuf2_vmalloc drbg uvc irqbypass snd_hwdep rapl snd_pcm videobuf2_memops videobuf2_v4l2 dell_wmi intel_cstate ansi_cprng dell_smbios videodev snd_timer dcdbas intel_uncore ucsi_acpi ecdh_generic mei_me typec_ucsi iTCO_wdt intel_pmc_bxt snd iTCO_vendor_support wmi_bmof intel_wmi_thunderbolt watchdog dell_wmi_descriptor pcspkr mei videobuf2_common soundcore rfkill drm_buddy typec ecc mc intel_pch_thermal drm_display_helper cec intel_vbtn soc_button_array rc_core processor_thermal_device_pci_legacy processor_thermal_device ttm processor_thermal_wt_hint processor_thermal_rfim processor_thermal_rapl int3400_thermal drm_kms_helper int3403_thermal intel_rapl_common acpi_thermal_rel intel_pmc_core intel_hid intel_xhci_usb_role_switch processor_thermal_wt_req button processor_thermal_power_floor
[ 7487.040218] processor_thermal_mbox sparse_keymap evdev acpi_pad int340x_thermal_zone ac intel_soc_dts_iosf i2c_algo_bit roles hid_multitouch serio_raw msr parport_pc ppdev lp parport loop efi_pstore configfs nfnetlink efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic dm_crypt dm_mod usbhid nvme crc32_pclmul crc32c_intel nvme_core t10_pi hid_generic ghash_clmulni_intel crc64_rocksoft_generic sha512_ssse3 crc64_rocksoft i2c_hid_acpi crc_t10dif i2c_hid crct10dif_generic xhci_pci sha512_generic drm xhci_hcd sha256_ssse3 intel_lpss_pci crct10dif_pclmul i2c_i801 crc64 usbcore sha1_ssse3 crct10dif_common i2c_smbus hid battery intel_lpss idma64 usb_common video wmi aesni_intel crypto_simd cryptd
[ 7487.040256] CPU: 2 PID: 54815 Comm: kworker/u8:61 Not tainted 6.7-amd64 #1 Debian 6.7-1~exp1
[ 7487.040258] Hardware name: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 7487.040260] Workqueue: USBC000:00-con1 ucsi_poll_worker [typec_ucsi]
[ 7487.040269] RIP: 0010:refcount_warn_saturate+0xbe/0x110
[ 7487.040272] Code: 01 01 e8 f5 22 a9 ff 0f 0b c3 cc cc cc cc 80 3d e1 62 7e 01 00 75 85 48 c7 c7 38 ca 8f 89 c6 05 d1 62 7e 01 01 e8 d2 22 a9 ff <0f> 0b c3 cc cc cc cc 80 3d bf 62 7e 01 00 0f 85 5e ff ff ff 48 c7
[ 7487.040274] RSP: 0000:ffffb653c149fd90 EFLAGS: 00010282
[ 7487.040276] RAX: 0000000000000000 RBX: ffffa07c8687ac08 RCX: 0000000000000027
[ 7487.040278] RDX: ffffa07ff1521408 RSI: 0000000000000001 RDI: ffffa07ff1521400
[ 7487.040279] RBP: ffffa07c8687ac00 R08: 0000000000000000 R09: 65646e75203a745f
[ 7487.040280] R10: 75203b776f6c6672 R11: 72657466612d6573 R12: 0000000000000000
[ 7487.040281] R13: ffffa07c8484fc40 R14: ffffffff8951ffa0 R15: ffffa07ee4b06b48
[ 7487.040282] FS: 0000000000000000(0000) GS:ffffa07ff1500000(0000) knlGS:0000000000000000
[ 7487.040283] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7487.040285] CR2: 0000000000000000 CR3: 0000000246820001 CR4: 00000000003706f0
[ 7487.040286] Call Trace:
[ 7487.040288] <TASK>
[ 7487.040289] ? refcount_warn_saturate+0xbe/0x110
[ 7487.040292] ? __warn+0x81/0x130
[ 7487.040298] ? refcount_warn_saturate+0xbe/0x110
[ 7487.040300] ? report_bug+0x171/0x1a0
[ 7487.040304] ? console_unlock+0xcb/0x120
[ 7487.040307] ? handle_bug+0x3c/0x80
[ 7487.040309] ? exc_invalid_op+0x17/0x70
[ 7487.040311] ? asm_exc_invalid_op+0x1a/0x20
[ 7487.040315] ? refcount_warn_saturate+0xbe/0x110
[ 7487.040319] typec_altmode_release+0x49/0xc0 [typec]
[ 7487.040334] device_release+0x34/0x90
[ 7487.040339] kobject_put+0x78/0x190
[ 7487.040341] ucsi_unregister_altmodes+0x41/0xa0 [typec_ucsi]
[ 7487.040347] ucsi_unregister_partner.part.0+0x77/0xa0 [typec_ucsi]
[ 7487.040353] ucsi_check_connection+0x73/0xc0 [typec_ucsi]
[ 7487.040359] ucsi_poll_worker+0x3a/0x110 [typec_ucsi]
[ 7487.040365] process_one_work+0x171/0x340
[ 7487.040369] worker_thread+0x27b/0x3a0
[ 7487.040372] ? __pfx_worker_thread+0x10/0x10
[ 7487.040374] kthread+0xe5/0x120
[ 7487.040376] ? __pfx_kthread+0x10/0x10
[ 7487.040378] ret_from_fork+0x31/0x50
[ 7487.040381] ? __pfx_kthread+0x10/0x10
[ 7487.040382] ret_from_fork_asm+0x1b/0x30
[ 7487.040388] </TASK>
[ 7487.040388] ---[ end trace 0000000000000000 ]---
[ 7487.224816] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 7487.500805] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 7489.963594] xhci_hcd 0000:39:00.0: remove, state 4
[ 7489.963600] usb usb4: USB disconnect, device number 1
[ 7489.963603] usb 4-1: USB disconnect, device number 2
[ 7489.963606] usb 4-1.1: USB disconnect, device number 3
[ 7489.963608] r8152-cfgselector 4-1.1.3: USB disconnect, device number 6
[ 7489.963647] OOM killer enabled.
[ 7489.963648] Restarting tasks ...
[ 7489.963678] usb 3-1: USB disconnect, device number 2
[ 7489.963682] usb 3-1.1: USB disconnect, device number 3
[ 7489.964436] usb 3-1.5: USB disconnect, device number 8
[ 7489.975598] done.
[ 7489.975613] random: crng reseeded on system resumption
[ 7490.021086] usb 4-1.4: USB disconnect, device number 4
[ 7490.099164] PM: suspend exit
[ 7490.170671] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 7490.198487] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 7490.198514] xhci_hcd 0000:39:00.0: remove, state 4
[ 7490.198518] usb usb3: USB disconnect, device number 1
[ 7490.198727] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 7490.198730] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 7490.199420] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 7490.199763] pcieport 0000:02:00.0: Unable to change power state from D3cold to D0, device inaccessible
[ 7490.199900] pci_bus 0000:03: busn_res: [bus 03] is released
[ 7490.200076] pci_bus 0000:04: busn_res: [bus 04-38] is released
[ 7490.200907] pci_bus 0000:39: busn_res: [bus 39] is released
[ 7490.201163] pci_bus 0000:02: busn_res: [bus 02-39] is released
[ 7490.285359] Process accounting resumed
[ 7490.286821] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 7490.293635] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 7492.312566] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[ 7506.318903] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 7506.318909] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 7506.322266] wlp58s0: authenticated
[ 7506.324496] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 7506.358428] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3)
[ 7506.361318] wlp58s0: associated
[ 7506.374700] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 7763.146603] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7767.186049] PM: suspend entry (deep)
[ 7767.199559] Filesystems sync: 0.013 seconds
[ 7767.199851] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 7767.200030] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 7767.200178] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 7767.206718] Freezing user space processes
[ 7767.211183] Freezing user space processes completed (elapsed 0.004 seconds)
[ 7767.211190] OOM killer disabled.
[ 7767.211191] Freezing remaining freezable tasks
[ 7767.212724] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 7767.212793] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7767.774978] ACPI: EC: interrupt blocked
[ 7767.810399] ACPI: PM: Preparing to enter system sleep state S3
[ 7767.817652] ACPI: EC: event blocked
[ 7767.817653] ACPI: EC: EC stopped
[ 7767.817653] ACPI: PM: Saving platform NVS memory
[ 7767.819136] Disabling non-boot CPUs ...
[ 7767.820425] smpboot: CPU 1 is now offline
[ 7767.822823] smpboot: CPU 2 is now offline
[ 7767.824836] smpboot: CPU 3 is now offline
[ 7767.831982] ACPI: PM: Low-level resume complete
[ 7767.832023] ACPI: EC: EC started
[ 7767.832024] ACPI: PM: Restoring platform NVS memory
[ 7767.834138] Enabling non-boot CPUs ...
[ 7767.834164] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7767.834965] CPU1 is up
[ 7767.834983] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7767.835743] CPU2 is up
[ 7767.835762] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7767.836449] CPU3 is up
[ 7767.839306] ACPI: PM: Waking up from system sleep state S3
[ 7767.883379] ACPI: EC: interrupt unblocked
[ 7767.883692] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 7767.883712] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 7767.883801] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 7767.903331] DMAR: DRHD: handling fault status reg 2
[ 7767.903337] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
[ 7767.904975] ACPI: EC: event unblocked
[ 7767.917570] nvme nvme0: 4/0/0 default/read/poll queues
[ 7767.921375] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7767.923980] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7767.931564] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7768.223061] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 7768.499091] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 7768.775114] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 7768.930818] OOM killer enabled.
[ 7768.930820] Restarting tasks ... done.
[ 7768.938872] random: crng reseeded on system resumption
[ 7768.995553] PM: suspend exit
[ 7769.050396] Process accounting resumed
[ 7769.306972] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 7769.344055] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 7773.406757] ucsi_acpi USBC000:00: failed to re-enable notifications (-110)
[ 7774.614369] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 7774.614375] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 7774.616904] wlp58s0: authenticated
[ 7774.618743] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 7774.649373] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3)
[ 7774.652149] wlp58s0: associated
[ 7774.750355] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 7810.590669] rfkill: input handler enabled
[ 7812.432953] rfkill: input handler disabled
[ 7834.997603] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7860.148927] PM: suspend entry (deep)
[ 7860.158457] Filesystems sync: 0.009 seconds
[ 7860.158651] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 7860.158817] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 7860.158958] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 7860.166930] Freezing user space processes
[ 7860.172200] Freezing user space processes completed (elapsed 0.005 seconds)
[ 7860.172209] OOM killer disabled.
[ 7860.172211] Freezing remaining freezable tasks
[ 7860.173865] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 7860.173938] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7860.737884] ACPI: EC: interrupt blocked
[ 7860.770234] ACPI: PM: Preparing to enter system sleep state S3
[ 7860.776133] ACPI: EC: event blocked
[ 7860.776133] ACPI: EC: EC stopped
[ 7860.776134] ACPI: PM: Saving platform NVS memory
[ 7860.777615] Disabling non-boot CPUs ...
[ 7860.778952] smpboot: CPU 1 is now offline
[ 7860.781204] smpboot: CPU 2 is now offline
[ 7860.783276] smpboot: CPU 3 is now offline
[ 7860.790397] ACPI: PM: Low-level resume complete
[ 7860.790438] ACPI: EC: EC started
[ 7860.790438] ACPI: PM: Restoring platform NVS memory
[ 7860.792570] Enabling non-boot CPUs ...
[ 7860.792598] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7860.793317] CPU1 is up
[ 7860.793335] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7860.794076] CPU2 is up
[ 7860.794093] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7860.794799] CPU3 is up
[ 7860.797671] ACPI: PM: Waking up from system sleep state S3
[ 7865.755580] ACPI: EC: interrupt unblocked
[ 7865.755882] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 7865.755889] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 7865.755891] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 7865.775498] DMAR: DRHD: handling fault status reg 2
[ 7865.775507] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
[ 7865.777159] ACPI: EC: event unblocked
[ 7865.790961] nvme nvme0: 4/0/0 default/read/poll queues
[ 7865.866656] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7865.866671] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7865.866678] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7866.155897] Registered IR keymap rc-cec
[ 7866.155954] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0
[ 7866.155990] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input117
[ 7866.158866] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 7866.434814] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 7866.710836] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 7866.865691] OOM killer enabled.
[ 7866.865693] Restarting tasks ...
[ 7866.865762] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400
[ 7866.865824] pci 0000:01:00.0: enabling Extended Tags
[ 7866.865938] pci 0000:01:00.0: supports D1 D2
[ 7866.865941] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7866.866741] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 7866.868455] pci 0000:01:00.0: Adding to iommu group 16
[ 7866.868758] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
[ 7866.868829] pci 0000:02:00.0: enabling Extended Tags
[ 7866.868962] pci 0000:02:00.0: supports D1 D2
[ 7866.868966] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7866.869320] pci 0000:02:00.0: Adding to iommu group 17
[ 7866.869421] done.
[ 7866.869469] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400
[ 7866.869504] random: crng reseeded on system resumption
[ 7866.869547] pci 0000:02:01.0: enabling Extended Tags
[ 7866.873439] pci 0000:02:01.0: supports D1 D2
[ 7866.873443] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7866.877077] pci 0000:02:01.0: Adding to iommu group 18
[ 7866.877218] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400
[ 7866.877283] pci 0000:02:02.0: enabling Extended Tags
[ 7866.877414] pci 0000:02:02.0: supports D1 D2
[ 7866.877417] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7866.877646] pci 0000:02:02.0: Adding to iommu group 19
[ 7866.877767] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 7866.877777] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 7866.877785] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 7866.877849] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 7866.877858] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 7866.877921] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 7866.877930] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 7866.877936] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 7866.878043] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330
[ 7866.878069] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff]
[ 7866.878157] pci 0000:39:00.0: enabling Extended Tags
[ 7866.878305] pci 0000:39:00.0: supports D1 D2
[ 7866.878307] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7866.878440] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 7866.878604] pci 0000:39:00.0: Adding to iommu group 19
[ 7866.878691] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 7866.878701] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 7866.878733] pci_bus 0000:02: Allocating resources
[ 7866.878751] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 7866.878755] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 7866.878757] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 7866.878760] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 7866.878765] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 7866.878767] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 7866.878770] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 7866.878772] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 7866.878777] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 7866.878779] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 7866.878781] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 7866.878782] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.878783] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 7866.878785] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.878788] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 7866.878790] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 7866.878792] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 7866.878794] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.878796] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 7866.878798] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.878800] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 7866.878807] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 7866.878817] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 7866.878822] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 7866.878826] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 7866.878835] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 7866.878840] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 7866.878849] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 7866.878854] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 7866.878858] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 7866.881171] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 7866.881184] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 7866.882405] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 7866.883794] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 7866.883802] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 7866.883809] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 7866.883889] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 7866.883891] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7866.883893] usb usb3: Product: xHCI Host Controller
[ 7866.883894] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 7866.883895] usb usb3: SerialNumber: 0000:39:00.0
[ 7866.884757] hub 3-0:1.0: USB hub found
[ 7866.884773] hub 3-0:1.0: 2 ports detected
[ 7866.959759] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 7866.959764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7866.959767] usb usb4: Product: xHCI Host Controller
[ 7866.959769] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 7866.959770] usb usb4: SerialNumber: 0000:39:00.0
[ 7866.967782] hub 4-0:1.0: USB hub found
[ 7866.967804] hub 4-0:1.0: 2 ports detected
[ 7866.972597] pci_bus 0000:02: Allocating resources
[ 7866.972629] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 7866.972635] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 7866.972638] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 7866.972643] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 7866.972654] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 7866.972657] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 7866.972659] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 7866.972660] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 7866.972665] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 7866.972667] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 7866.972669] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 7866.972670] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.972677] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 7866.972679] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.972683] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 7866.972685] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 7866.972687] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 7866.972689] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.972690] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 7866.972692] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 7866.979246] PM: suspend exit
[ 7867.063858] Process accounting resumed
[ 7867.069431] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 7867.073875] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 7867.194656] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 7867.344984] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 7867.344999] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7867.345002] usb 3-1: Product: USB2.0 Hub
[ 7867.345004] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 7867.345007] usb 3-1: SerialNumber: 000000000
[ 7867.346493] hub 3-1:1.0: USB hub found
[ 7867.346700] hub 3-1:1.0: 5 ports detected
[ 7867.470976] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 7867.523066] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 7867.523093] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7867.523108] usb 4-1: Product: USB3.0 Hub
[ 7867.523117] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 7867.523125] usb 4-1: SerialNumber: 000000000
[ 7867.533947] hub 4-1:1.0: USB hub found
[ 7867.534201] hub 4-1:1.0: 4 ports detected
[ 7868.078619] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 7868.229038] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 7868.229051] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7868.229053] usb 3-1.1: Product: USB2.0 Hub
[ 7868.229055] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[ 7868.229057] usb 3-1.1: SerialNumber: 000000000
[ 7868.230313] hub 3-1.1:1.0: USB hub found
[ 7868.230431] hub 3-1.1:1.0: 4 ports detected
[ 7868.608469] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 7868.697756] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 7868.697762] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7868.697764] usb 4-1.1: Product: USB3.0 Hub
[ 7868.697766] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[ 7868.697767] usb 4-1.1: SerialNumber: 000000000
[ 7868.699778] hub 4-1.1:1.0: USB hub found
[ 7868.699937] hub 4-1.1:1.0: 4 ports detected
[ 7868.774609] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd
[ 7868.875829] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 7868.875834] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7868.875836] usb 3-1.5: Product: USB Billboard Device
[ 7868.875838] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[ 7868.875840] usb 3-1.5: SerialNumber: 0000000000000001
[ 7872.164011] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 7872.164017] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 7872.165547] wlp58s0: authenticated
[ 7872.166592] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 7872.186650] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3)
[ 7872.189642] wlp58s0: associated
[ 7872.189668] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 7874.022603] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[ 7879.398569] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[ 7879.606517] usb 4-1.4: device not accepting address 4, error -62
[ 7880.374509] usb 3-1.1.2: new high-speed USB device number 5 using xhci_hcd
[ 7880.498308] usb 3-1.1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[ 7880.498313] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7880.498315] usb 3-1.1.2: Product: 4-Port USB 2.0 Hub
[ 7880.498316] usb 3-1.1.2: Manufacturer: Generic
[ 7880.500428] hub 3-1.1.2:1.0: USB hub found
[ 7880.501628] hub 3-1.1.2:1.0: 4 ports detected
[ 7880.575256] usb 4-1.1.2: new SuperSpeed USB device number 6 using xhci_hcd
[ 7880.610852] usb 4-1.1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[ 7880.610860] usb 4-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7880.610863] usb 4-1.1.2: Product: 4-Port USB 3.0 Hub
[ 7880.610865] usb 4-1.1.2: Manufacturer: Generic
[ 7880.615601] hub 4-1.1.2:1.0: USB hub found
[ 7880.616909] hub 4-1.1.2:1.0: 2 ports detected
[ 7881.366633] usb 3-1.1.2.3: new low-speed USB device number 7 using xhci_hcd
[ 7881.472592] usb 3-1.1.2.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[ 7881.472616] usb 3-1.1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7881.472626] usb 3-1.1.2.3: Product: USB Optical Mouse
[ 7881.483783] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.3/3-1.1.2.3:1.0/0003:1BCF:0005.0006/input/input126
[ 7881.484212] hid-generic 0003:1BCF:0005.0006: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.1.2.3/input0
[ 7881.546936] usb 4-1.1.3: new SuperSpeed USB device number 7 using xhci_hcd
[ 7881.568462] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 7881.568485] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 7881.568495] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[ 7881.568502] usb 4-1.1.3: Manufacturer: Realtek
[ 7881.568508] usb 4-1.1.3: SerialNumber: 000001
[ 7886.822763] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[ 7892.198686] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[ 7892.406656] usb 4-1.4: device not accepting address 8, error -62
[ 7893.170691] usb 3-1.1.2.4: new low-speed USB device number 8 using xhci_hcd
[ 7893.278713] usb 3-1.1.2.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[ 7893.278738] usb 3-1.1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7893.278751] usb 3-1.1.2.4: Product: Dell KB216 Wired Keyboard
[ 7893.291112] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.0/0003:413C:2113.0007/input/input141
[ 7893.351219] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 7 using xhci_hcd
[ 7893.352161] hid-generic 0003:413C:2113.0007: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input0
[ 7893.358003] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0008/input/input142
[ 7893.385990] r8152 4-1.1.3:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw
[ 7893.409349] r8152 4-1.1.3:1.0: load rtl8153a-4 v2 02/07/20 successfully
[ 7893.414768] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0008/input/input143
[ 7893.414967] hid-generic 0003:413C:2113.0008: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input1
[ 7893.450031] r8152 4-1.1.3:1.0 eth0: v1.12.13
[ 7893.575704] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[ 7896.166295] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[ 7900.673728] Registered IR keymap rc-cec
[ 7900.673905] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0
[ 7900.674064] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input144
[ 7902.212753] usb 3-1.1.2: USB disconnect, device number 5
[ 7902.212775] usb 3-1.1.2.3: USB disconnect, device number 7
[ 7902.260239] usb 4-1.1.2: USB disconnect, device number 6
[ 7902.276144] usb 3-1.1.2.4: USB disconnect, device number 8
[ 7906.686521] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[ 7906.851568] usb 1-2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[ 7906.851595] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7906.851606] usb 1-2: Product: 4-Port USB 2.0 Hub
[ 7906.851615] usb 1-2: Manufacturer: Generic
[ 7906.854493] hub 1-2:1.0: USB hub found
[ 7906.855760] hub 1-2:1.0: 4 ports detected
[ 7907.146517] usb 1-2.3: new low-speed USB device number 6 using xhci_hcd
[ 7907.252318] usb 1-2.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[ 7907.252345] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7907.252356] usb 1-2.3: Product: USB Optical Mouse
[ 7907.265406] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:1BCF:0005.0009/input/input145
[ 7907.267326] hid-generic 0003:1BCF:0005.0009: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
[ 7907.346524] usb 1-2.4: new low-speed USB device number 7 using xhci_hcd
[ 7907.454437] usb 1-2.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[ 7907.454463] usb 1-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7907.454475] usb 1-2.4: Product: Dell KB216 Wired Keyboard
[ 7907.465414] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:413C:2113.000A/input/input146
[ 7907.523528] hid-generic 0003:413C:2113.000A: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-2.4/input0
[ 7907.529285] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:413C:2113.000B/input/input147
[ 7907.587062] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:413C:2113.000B/input/input148
[ 7907.587573] hid-generic 0003:413C:2113.000B: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-2.4/input1
[ 7908.975263] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 7909.012963] usb 2-2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[ 7909.012990] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7909.013002] usb 2-2: Product: 4-Port USB 3.0 Hub
[ 7909.013011] usb 2-2: Manufacturer: Generic
[ 7909.022896] hub 2-2:1.0: USB hub found
[ 7909.024638] hub 2-2:1.0: 2 ports detected
[ 7916.523114] rfkill: input handler enabled
[ 7926.584908] rfkill: input handler disabled
[ 9028.903392] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[11738.418394] perf: interrupt took too long (3167 > 3135), lowering kernel.perf_event_max_sample_rate to 63000
[13177.749479] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[13701.205206] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[13701.205222] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[13701.207553] wlp58s0: authenticated
[13701.212158] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[13701.244369] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[13701.248773] wlp58s0: associated
[13701.309540] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[13705.993549] usb 1-2: USB disconnect, device number 5
[13705.993569] usb 1-2.3: USB disconnect, device number 6
[13706.029892] usb 1-2.4: USB disconnect, device number 7
[13706.131730] usb 2-2: USB disconnect, device number 2
[13707.611153] usb 3-1: USB disconnect, device number 2
[13707.611165] usb 3-1.1: USB disconnect, device number 3
[13707.613605] usb 3-1.5: USB disconnect, device number 4
[13707.668437] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[13707.668459] xhci_hcd 0000:39:00.0: HC died; cleaning up
[13707.668484] r8152 4-1.1.3:1.0 enx00e04ceabc41: Stop submitting intr, status -108
[13707.723801] xhci_hcd 0000:39:00.0: remove, state 1
[13707.723809] usb usb4: USB disconnect, device number 1
[13707.799615] usb 4-1: USB disconnect, device number 2
[13707.799621] usb 4-1.1: USB disconnect, device number 3
[13707.799624] r8152-cfgselector 4-1.1.3: USB disconnect, device number 7
[13707.849630] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[13707.849641] xhci_hcd 0000:39:00.0: remove, state 1
[13707.849645] usb usb3: USB disconnect, device number 1
[13707.849834] xhci_hcd 0000:39:00.0: Host halt failed, -19
[13707.849837] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[13707.850076] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[13707.871996] pci_bus 0000:02: Allocating resources
[13707.872013] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[13707.872018] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[13707.872020] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[13707.872024] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[13707.872027] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[13707.872029] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[13707.872031] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[13707.872033] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[13707.872037] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[13707.872039] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[13707.872040] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[13707.872042] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[13707.872043] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[13707.872045] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[13707.872047] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[13707.872048] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[13707.872050] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[13707.872051] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[13707.872053] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[13707.872054] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[13712.814935] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[13712.819095] pci_bus 0000:03: busn_res: [bus 03] is released
[13712.819534] pci_bus 0000:04: busn_res: [bus 04-38] is released
[13712.821949] pci_bus 0000:39: busn_res: [bus 39] is released
[13712.822621] pci_bus 0000:02: busn_res: [bus 02-39] is released
[13724.368811] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[13730.096706] PM: suspend entry (deep)
[13730.116558] Filesystems sync: 0.019 seconds
[13730.116657] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[13730.116777] (NULL device *): firmware: direct-loading firmware regulatory.db
[13730.116811] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[13730.120232] Freezing user space processes
[13730.123012] Freezing user space processes completed (elapsed 0.002 seconds)
[13730.123016] OOM killer disabled.
[13730.123017] Freezing remaining freezable tasks
[13730.124430] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[13730.124478] printk: Suspending console(s) (use no_console_suspend to debug)
[13730.675112] ACPI: EC: interrupt blocked
[13730.711661] ACPI: PM: Preparing to enter system sleep state S3
[13730.719678] ACPI: EC: event blocked
[13730.719678] ACPI: EC: EC stopped
[13730.719679] ACPI: PM: Saving platform NVS memory
[13730.721198] Disabling non-boot CPUs ...
[13730.722503] smpboot: CPU 1 is now offline
[13730.724551] smpboot: CPU 2 is now offline
[13730.726618] smpboot: CPU 3 is now offline
[13730.733762] ACPI: PM: Low-level resume complete
[13730.733803] ACPI: EC: EC started
[13730.733804] ACPI: PM: Restoring platform NVS memory
[13730.735920] Enabling non-boot CPUs ...
[13730.735946] smpboot: Booting Node 0 Processor 1 APIC 0x2
[13730.736643] CPU1 is up
[13730.736662] smpboot: Booting Node 0 Processor 2 APIC 0x1
[13730.737384] CPU2 is up
[13730.737402] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13730.738055] CPU3 is up
[13730.740921] ACPI: PM: Waking up from system sleep state S3
[13735.879483] ACPI: EC: interrupt unblocked
[13735.879663] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[13735.879681] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[13735.879843] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[13735.904678] DMAR: DRHD: handling fault status reg 2
[13735.904686] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
[13735.906343] ACPI: EC: event unblocked
[13735.920925] nvme nvme0: 4/0/0 default/read/poll queues
[13735.993517] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[13735.993530] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[13735.993538] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[13736.280899] Registered IR keymap rc-cec
[13736.280955] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0
[13736.280992] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input226
[13736.292152] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[13736.568252] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[13736.844273] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[13736.994731] OOM killer enabled.
[13736.994733] Restarting tasks ...
[13736.994981] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400
[13736.995050] pci 0000:01:00.0: enabling Extended Tags
[13736.996084] pci 0000:01:00.0: supports D1 D2
[13736.996088] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[13736.996420] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[13736.997175] pci 0000:01:00.0: Adding to iommu group 16
[13736.997564] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[13736.999378] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
[13736.999451] pci 0000:02:00.0: enabling Extended Tags
[13736.999584] pci 0000:02:00.0: supports D1 D2
[13736.999587] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[13736.999864] pci 0000:02:00.0: Adding to iommu group 17
[13737.000042] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400
[13737.000128] pci 0000:02:01.0: enabling Extended Tags
[13737.000245] pci 0000:02:01.0: supports D1 D2
[13737.000247] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[13737.003933] done.
[13737.003960] random: crng reseeded on system resumption
[13737.004457] pci 0000:02:01.0: Adding to iommu group 18
[13737.004586] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400
[13737.004652] pci 0000:02:02.0: enabling Extended Tags
[13737.004777] pci 0000:02:02.0: supports D1 D2
[13737.004780] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[13737.005004] pci 0000:02:02.0: Adding to iommu group 19
[13737.005115] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[13737.005125] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[13737.005132] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[13737.005191] pci 0000:02:00.0: PCI bridge to [bus 03]
[13737.005200] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[13737.005259] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[13737.005269] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[13737.005276] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[13737.005377] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330
[13737.005404] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff]
[13737.005495] pci 0000:39:00.0: enabling Extended Tags
[13737.005633] pci 0000:39:00.0: supports D1 D2
[13737.005635] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[13737.005760] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[13737.005923] pci 0000:39:00.0: Adding to iommu group 19
[13737.005995] pci 0000:02:02.0: PCI bridge to [bus 39]
[13737.006006] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[13737.006038] pci_bus 0000:02: Allocating resources
[13737.006055] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[13737.006058] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[13737.006061] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[13737.006065] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[13737.006069] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[13737.006071] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[13737.006073] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[13737.006075] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[13737.006079] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[13737.006082] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[13737.006084] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[13737.006086] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[13737.006087] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[13737.006089] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[13737.006092] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[13737.006094] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[13737.006096] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[13737.006097] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[13737.006099] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[13737.006100] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[13737.006102] pci 0000:02:00.0: PCI bridge to [bus 03]
[13737.006108] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[13737.006117] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[13737.006122] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[13737.006127] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[13737.006134] pci 0000:02:02.0: PCI bridge to [bus 39]
[13737.006139] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[13737.006147] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[13737.006153] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[13737.006157] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[13737.009150] xhci_hcd 0000:39:00.0: xHCI Host Controller
[13737.009160] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[13737.010850] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[13737.011324] xhci_hcd 0000:39:00.0: xHCI Host Controller
[13737.011330] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[13737.011335] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[13737.011376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[13737.011380] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[13737.011381] usb usb3: Product: xHCI Host Controller
[13737.011383] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd
[13737.011384] usb usb3: SerialNumber: 0000:39:00.0
[13737.011535] hub 3-0:1.0: USB hub found
[13737.011545] hub 3-0:1.0: 2 ports detected
[13737.014728] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[13737.014734] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[13737.014736] usb usb4: Product: xHCI Host Controller
[13737.014738] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd
[13737.014740] usb usb4: SerialNumber: 0000:39:00.0
[13737.014901] hub 4-0:1.0: USB hub found
[13737.014912] hub 4-0:1.0: 2 ports detected
[13737.015897] pci_bus 0000:02: Allocating resources
[13737.015934] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[13737.015939] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[13737.015942] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[13737.015945] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[13737.015951] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[13737.016002] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[13737.016122] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[13737.016125] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[13737.016131] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[13737.016133] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[13737.016134] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[13737.016136] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[13737.016138] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[13737.016140] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[13737.016142] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[13737.016144] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[13737.016145] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[13737.016147] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[13737.016149] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[13737.016151] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[13737.128025] usb 1-1: new high-speed USB device number 8 using xhci_hcd
[13737.238961] PM: suspend exit
[13737.268024] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[13737.297913] usb 1-1: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[13737.297920] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[13737.297923] usb 1-1: Product: 4-Port USB 2.0 Hub
[13737.297925] usb 1-1: Manufacturer: Generic
[13737.300700] hub 1-1:1.0: USB hub found
[13737.304016] hub 1-1:1.0: 4 ports detected
[13737.415194] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[13737.416033] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
[13737.418454] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[13737.418464] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13737.418467] usb 3-1: Product: USB2.0 Hub
[13737.418469] usb 3-1: Manufacturer: VIA Labs, Inc.
[13737.418471] usb 3-1: SerialNumber: 000000000
[13737.420456] hub 3-1:1.0: USB hub found
[13737.422033] hub 3-1:1.0: 5 ports detected
[13737.451675] usb 2-1: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[13737.451682] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[13737.451685] usb 2-1: Product: 4-Port USB 3.0 Hub
[13737.451686] usb 2-1: Manufacturer: Generic
[13737.460088] hub 2-1:1.0: USB hub found
[13737.461544] hub 2-1:1.0: 2 ports detected
[13737.473654] Process accounting resumed
[13737.549711] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[13737.596783] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[13737.596789] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13737.596791] usb 4-1: Product: USB3.0 Hub
[13737.596792] usb 4-1: Manufacturer: VIA Labs, Inc.
[13737.596794] usb 4-1: SerialNumber: 000000000
[13737.602069] hub 4-1:1.0: USB hub found
[13737.602134] hub 4-1:1.0: 4 ports detected
[13737.607992] usb 1-1.3: new low-speed USB device number 9 using xhci_hcd
[13737.716839] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[13737.716846] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[13737.716849] usb 1-1.3: Product: USB Optical Mouse
[13737.728036] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1BCF:0005.000C/input/input229
[13737.729757] hid-generic 0003:1BCF:0005.000C: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1.3/input0
[13737.837893] usb 1-1.4: new low-speed USB device number 10 using xhci_hcd
[13737.943342] usb 1-1.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[13737.943356] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[13737.943358] usb 1-1.4: Product: Dell KB216 Wired Keyboard
[13737.955748] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2113.000D/input/input230
[13738.016411] hid-generic 0003:413C:2113.000D: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-1.4/input0
[13738.021142] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:413C:2113.000E/input/input231
[13738.080320] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:413C:2113.000E/input/input232
[13738.080871] hid-generic 0003:413C:2113.000E: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-1.4/input1
[13738.151964] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[13738.311654] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[13738.311661] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13738.311663] usb 3-1.1: Product: USB2.0 Hub
[13738.311665] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[13738.311667] usb 3-1.1: SerialNumber: 000000000
[13738.312655] hub 3-1.1:1.0: USB hub found
[13738.312814] hub 3-1.1:1.0: 4 ports detected
[13738.408256] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[13738.469805] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[13738.469811] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13738.469814] usb 4-1.1: Product: USB3.0 Hub
[13738.469815] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[13738.469817] usb 4-1.1: SerialNumber: 000000000
[13738.477219] hub 4-1.1:1.0: USB hub found
[13738.477410] hub 4-1.1:1.0: 4 ports detected
[13738.551987] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd
[13738.669735] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[13738.669742] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13738.669745] usb 3-1.5: Product: USB Billboard Device
[13738.669746] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[13738.669748] usb 3-1.5: SerialNumber: 0000000000000001
[13743.045600] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[13743.045608] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[13743.047967] wlp58s0: authenticated
[13743.051919] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[13743.068668] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[13743.071461] wlp58s0: associated
[13743.140436] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[13743.803986] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[13749.179951] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[13749.387848] usb 4-1.4: device not accepting address 4, error -62
[13750.851893] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[13750.876525] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[13750.876531] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[13750.876533] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[13750.876535] usb 4-1.1.3: Manufacturer: Realtek
[13750.876536] usb 4-1.1.3: SerialNumber: 000001
[13750.964207] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[13750.989917] r8152 4-1.1.3:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw
[13751.006104] r8152 4-1.1.3:1.0: load rtl8153a-4 v2 02/07/20 successfully
[13751.038157] r8152 4-1.1.3:1.0 eth0: v1.12.13
[13751.413679] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[13754.548324] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[13780.274411] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[13949.173910] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[13952.435734] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[16308.689709] rfkill: input handler enabled
[16319.899816] rfkill: input handler disabled
[16322.218829] rfkill: input handler enabled
[16322.219599] rfkill: input handler disabled
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-18 12:57 PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Paul Menzel
@ 2024-01-18 21:37 ` Christian A. Ehrhardt
2024-01-20 20:26 ` Hans de Goede
2024-01-27 8:12 ` PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Linux regression tracking #update (Thorsten Leemhuis)
2 siblings, 0 replies; 14+ messages in thread
From: Christian A. Ehrhardt @ 2024-01-18 21:37 UTC (permalink / raw)
To: Paul Menzel
Cc: LKML, linux-input, linux-pm, Hans de Goede, Dell.Client.Kernel,
regressions
Hi Paul,
On Thu, Jan 18, 2024 at 01:57:50PM +0100, Paul Menzel wrote:
> [ 7487.040106] ------------[ cut here ]------------
> [ 7487.040108] refcount_t: underflow; use-after-free.
> [ 7487.040117] WARNING: CPU: 2 PID: 54815 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
> [ 7487.040123] Modules linked in: sctp libcrc32c typec_displayport r8153_ecm cdc_ether usbnet sd_mod r8152 sg mii uas usb_storage scsi_mod scsi_common l2tp_ppp xfrm_interface l2tp_netlink xfrm6_tunnel l2tp_core tunnel6 tunnel4 ip6_udp_tunnel xfrm_user udp_tunnel xfrm_algo pppox ppp_generic slhc ctr ccm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device qrtr snd_sof_pci_intel_skl snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation snd_hda_codec_hdmi snd_sof_intel_hda_mlink soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof snd_sof_utils soundwire_bus snd_ctl_led snd_soc_avs snd_soc_hda_codec snd_soc_skl snd_hda_codec_realtek snd_soc_hdac_hda ath10k_pci snd_hda_ext_core binfmt_misc snd_hda_codec_generic ath10k_core btusb snd_soc_sst_ipc btrtl snd_soc_sst_dsp snd_soc_acpi_intel_match btintel nls_ascii btbcm nls_cp437 ath snd_soc_acpi btmtk mac80211 vfat bluetooth snd_soc_core x86_pkg_temp_thermal fat intel_powerclamp coretemp kvm_intel snd_compress snd_pcm_dmaengine dell_laptop
> [ 7487.040173] snd_hda_intel mei_pxp mei_hdcp mei_wdt i915 ledtrig_audio snd_intel_dspcfg libarc4 snd_intel_sdw_acpi kvm intel_rapl_msr snd_hda_codec sha3_generic joydev jitterentropy_rng dell_smm_hwmon uvcvideo snd_hda_core cfg80211 videobuf2_vmalloc drbg uvc irqbypass snd_hwdep rapl snd_pcm videobuf2_memops videobuf2_v4l2 dell_wmi intel_cstate ansi_cprng dell_smbios videodev snd_timer dcdbas intel_uncore ucsi_acpi ecdh_generic mei_me typec_ucsi iTCO_wdt intel_pmc_bxt snd iTCO_vendor_support wmi_bmof intel_wmi_thunderbolt watchdog dell_wmi_descriptor pcspkr mei videobuf2_common soundcore rfkill drm_buddy typec ecc mc intel_pch_thermal drm_display_helper cec intel_vbtn soc_button_array rc_core processor_thermal_device_pci_legacy processor_thermal_device ttm processor_thermal_wt_hint processor_thermal_rfim processor_thermal_rapl int3400_thermal drm_kms_helper int3403_thermal intel_rapl_common acpi_thermal_rel intel_pmc_core intel_hid intel_xhci_usb_role_switch processor_thermal_wt_req button processor_thermal_power_floor
> [ 7487.040218] processor_thermal_mbox sparse_keymap evdev acpi_pad int340x_thermal_zone ac intel_soc_dts_iosf i2c_algo_bit roles hid_multitouch serio_raw msr parport_pc ppdev lp parport loop efi_pstore configfs nfnetlink efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic dm_crypt dm_mod usbhid nvme crc32_pclmul crc32c_intel nvme_core t10_pi hid_generic ghash_clmulni_intel crc64_rocksoft_generic sha512_ssse3 crc64_rocksoft i2c_hid_acpi crc_t10dif i2c_hid crct10dif_generic xhci_pci sha512_generic drm xhci_hcd sha256_ssse3 intel_lpss_pci crct10dif_pclmul i2c_i801 crc64 usbcore sha1_ssse3 crct10dif_common i2c_smbus hid battery intel_lpss idma64 usb_common video wmi aesni_intel crypto_simd cryptd
> [ 7487.040256] CPU: 2 PID: 54815 Comm: kworker/u8:61 Not tainted 6.7-amd64 #1 Debian 6.7-1~exp1
> [ 7487.040258] Hardware name: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
> [ 7487.040260] Workqueue: USBC000:00-con1 ucsi_poll_worker [typec_ucsi]
> [ 7487.040269] RIP: 0010:refcount_warn_saturate+0xbe/0x110
> [ 7487.040272] Code: 01 01 e8 f5 22 a9 ff 0f 0b c3 cc cc cc cc 80 3d e1 62 7e 01 00 75 85 48 c7 c7 38 ca 8f 89 c6 05 d1 62 7e 01 01 e8 d2 22 a9 ff <0f> 0b c3 cc cc cc cc 80 3d bf 62 7e 01 00 0f 85 5e ff ff ff 48 c7
> [ 7487.040274] RSP: 0000:ffffb653c149fd90 EFLAGS: 00010282
> [ 7487.040276] RAX: 0000000000000000 RBX: ffffa07c8687ac08 RCX: 0000000000000027
> [ 7487.040278] RDX: ffffa07ff1521408 RSI: 0000000000000001 RDI: ffffa07ff1521400
> [ 7487.040279] RBP: ffffa07c8687ac00 R08: 0000000000000000 R09: 65646e75203a745f
> [ 7487.040280] R10: 75203b776f6c6672 R11: 72657466612d6573 R12: 0000000000000000
> [ 7487.040281] R13: ffffa07c8484fc40 R14: ffffffff8951ffa0 R15: ffffa07ee4b06b48
> [ 7487.040282] FS: 0000000000000000(0000) GS:ffffa07ff1500000(0000) knlGS:0000000000000000
> [ 7487.040283] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 7487.040285] CR2: 0000000000000000 CR3: 0000000246820001 CR4: 00000000003706f0
> [ 7487.040286] Call Trace:
> [ 7487.040288] <TASK>
> [ 7487.040289] ? refcount_warn_saturate+0xbe/0x110
> [ 7487.040292] ? __warn+0x81/0x130
> [ 7487.040298] ? refcount_warn_saturate+0xbe/0x110
> [ 7487.040300] ? report_bug+0x171/0x1a0
> [ 7487.040304] ? console_unlock+0xcb/0x120
> [ 7487.040307] ? handle_bug+0x3c/0x80
> [ 7487.040309] ? exc_invalid_op+0x17/0x70
> [ 7487.040311] ? asm_exc_invalid_op+0x1a/0x20
> [ 7487.040315] ? refcount_warn_saturate+0xbe/0x110
> [ 7487.040319] typec_altmode_release+0x49/0xc0 [typec]
> [ 7487.040334] device_release+0x34/0x90
> [ 7487.040339] kobject_put+0x78/0x190
> [ 7487.040341] ucsi_unregister_altmodes+0x41/0xa0 [typec_ucsi]
> [ 7487.040347] ucsi_unregister_partner.part.0+0x77/0xa0 [typec_ucsi]
> [ 7487.040353] ucsi_check_connection+0x73/0xc0 [typec_ucsi]
> [ 7487.040359] ucsi_poll_worker+0x3a/0x110 [typec_ucsi]
> [ 7487.040365] process_one_work+0x171/0x340
> [ 7487.040369] worker_thread+0x27b/0x3a0
> [ 7487.040372] ? __pfx_worker_thread+0x10/0x10
> [ 7487.040374] kthread+0xe5/0x120
> [ 7487.040376] ? __pfx_kthread+0x10/0x10
> [ 7487.040378] ret_from_fork+0x31/0x50
> [ 7487.040381] ? __pfx_kthread+0x10/0x10
> [ 7487.040382] ret_from_fork_asm+0x1b/0x30
> [ 7487.040388] </TASK>
> [ 7487.040388] ---[ end trace 0000000000000000 ]---
It is probably unrelated but there is the above warning in your logs
during resume. The warning is related to USB-C and can be avoided if
you do not connect anything to the USB-C ports for the duration of the
test. The real fix for this warning made it into Linus's tree today.
regards Christian
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-18 12:57 PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Paul Menzel
2024-01-18 21:37 ` Christian A. Ehrhardt
@ 2024-01-20 20:26 ` Hans de Goede
2024-01-21 14:26 ` Paul Menzel
2024-02-03 16:16 ` + XPS 13 9343 Antoine
2024-01-27 8:12 ` PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Linux regression tracking #update (Thorsten Leemhuis)
2 siblings, 2 replies; 14+ messages in thread
From: Hans de Goede @ 2024-01-20 20:26 UTC (permalink / raw)
To: Paul Menzel, LKML; +Cc: linux-input, linux-pm, Dell.Client.Kernel, regressions
Hi Paul,
On 1/18/24 13:57, Paul Menzel wrote:
> #regzbot introduced v6.6.11..v6.7
>
> Dear Linux folks,
>
>
> There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360 (Intel i7-7500U).
>
> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>
> The PS/2 keyboard goes missing after S3 resume¹. The problem does not happen with Linux 6.6.11.
Thank you for reporting this.
Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
This should at least lead to the device not disappearing from
"sudo libinput list-devices"
The next question is if the keyboard will still actually
work after suspend/resume with "i8042.dumbkbd=1". If it
stays in the list, but no longer works then there is
a problem with the i8042 controller; or interrupt
delivery to the i8042 controller.
If "i8042.dumbkbd=1" somehow fully fixes things, then I guess
my atkbd driver fix for other laptop keyboards is somehow
causing issues for yours.
If "i8042.dumbkbd=1" fully fixes things, can you try building
your own 6.7.0 kernel with commit 936e4d49ecbc:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=936e4d49ecbc8c404790504386e1422b599dec39
reverted?
Regards,
Hans
>
> [ 1.435071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 1.435409] i8042: Warning: Keylock active
> [ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12
> […]
> [ 1.439743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>
> $ sudo libinput list-devices
> […]
> Device: AT Translated Set 2 keyboard
> Kernel: /dev/input/event0
> Group: 15
> Seat: seat0, default
> Capabilities: keyboard
> Tap-to-click: n/a
> Tap-and-drag: n/a
> Tap drag lock: n/a
> Left-handed: n/a
> Nat.scrolling: n/a
> Middle emulation: n/a
> Calibration: n/a
> Scroll methods: none
> Click methods: none
> Disable-w-typing: n/a
> Disable-w-trackpointing: n/a
> Accel profiles: n/a
> Rotation: 0.0
>
> `libinput list-devices` does not list the device after resuming from S3. Some of the function keys, like brightness and airplane mode keys, still work, as the events are probably transmitted over the embedded controller or some other mechanism. An external USB keyboard also still works.
>
> I haven’t had time to further analyze this, but wanted to report it. No idea
>
>
> Kind regards,
>
> Paul
>
>
> ¹ s2idle is not working correctly on the device, in the sense, that energy usage is very high in that state, and the full battery is at 20 % after leaving it for eight hours.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-20 20:26 ` Hans de Goede
@ 2024-01-21 14:26 ` Paul Menzel
2024-01-21 14:39 ` Hans de Goede
2024-01-22 13:43 ` Hans de Goede
2024-02-03 16:16 ` + XPS 13 9343 Antoine
1 sibling, 2 replies; 14+ messages in thread
From: Paul Menzel @ 2024-01-21 14:26 UTC (permalink / raw)
To: Hans de Goede
Cc: linux-input, linux-pm, Dell.Client.Kernel, regressions, linux-kernel
Dear Hans,
As always thank you very much for taking the time to reply.
Am 20.01.24 um 21:26 schrieb Hans de Goede:
> On 1/18/24 13:57, Paul Menzel wrote:
>> #regzbot introduced v6.6.11..v6.7
>> There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360 (Intel i7-7500U).
>>
>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>>
>> The PS/2 keyboard goes missing after S3 resume¹. The problem does not happen with Linux 6.6.11.
>
> Thank you for reporting this.
>
> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>
> This should at least lead to the device not disappearing from
>
> "sudo libinput list-devices"
>
> The next question is if the keyboard will still actually
> work after suspend/resume with "i8042.dumbkbd=1". If it
> stays in the list, but no longer works then there is
> a problem with the i8042 controller; or interrupt
> delivery to the i8042 controller.
>
> If "i8042.dumbkbd=1" somehow fully fixes things, then I guess
> my atkbd driver fix for other laptop keyboards is somehow
> causing issues for yours.
Just a quick feedback, that booting with `i8042.dumbkbd=1` seems to fix
the issue.
> If "i8042.dumbkbd=1" fully fixes things, can you try building
> your own 6.7.0 kernel with commit 936e4d49ecbc:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=936e4d49ecbc8c404790504386e1422b599dec39
>
> reverted?
I am going to try that as soon as possible.
Kind regards,
Paul
>> [ 1.435071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>> [ 1.435409] i8042: Warning: Keylock active
>> [ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12
>> […]
>> [ 1.439743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>>
>> $ sudo libinput list-devices
>> […]
>> Device: AT Translated Set 2 keyboard
>> Kernel: /dev/input/event0
>> Group: 15
>> Seat: seat0, default
>> Capabilities: keyboard
>> Tap-to-click: n/a
>> Tap-and-drag: n/a
>> Tap drag lock: n/a
>> Left-handed: n/a
>> Nat.scrolling: n/a
>> Middle emulation: n/a
>> Calibration: n/a
>> Scroll methods: none
>> Click methods: none
>> Disable-w-typing: n/a
>> Disable-w-trackpointing: n/a
>> Accel profiles: n/a
>> Rotation: 0.0
>>
>> `libinput list-devices` does not list the device after resuming
>> from S3. Some of the function keys, like brightness and airplane
>> mode keys, still work, as the events are probably transmitted over
>> the embedded controller or some other mechanism. An external USB
>> keyboard also still works.
>>
>> I haven’t had time to further analyze this, but wanted to report
>> it. No idea
>>
>>
>> Kind regards,
>>
>> Paul
>>
>>
>> ¹ s2idle is not working correctly on the device, in the sense, that
>> energy usage is very high in that state, and the full battery is at
>> 20 % after leaving it for eight hours.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-21 14:26 ` Paul Menzel
@ 2024-01-21 14:39 ` Hans de Goede
2024-01-22 13:43 ` Hans de Goede
1 sibling, 0 replies; 14+ messages in thread
From: Hans de Goede @ 2024-01-21 14:39 UTC (permalink / raw)
To: Paul Menzel
Cc: linux-input, linux-pm, Dell.Client.Kernel, regressions, linux-kernel
Hi Paul,
On 1/21/24 15:26, Paul Menzel wrote:
> Dear Hans,
>
>
> As always thank you very much for taking the time to reply.
>
>
> Am 20.01.24 um 21:26 schrieb Hans de Goede:
>
>> On 1/18/24 13:57, Paul Menzel wrote:
>>> #regzbot introduced v6.6.11..v6.7
>
>>> There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360 (Intel i7-7500U).
>>>
>>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>>>
>>> The PS/2 keyboard goes missing after S3 resume¹. The problem does not happen with Linux 6.6.11.
>>
>> Thank you for reporting this.
>>
>> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>>
>> This should at least lead to the device not disappearing from
>>
>> "sudo libinput list-devices"
>>
>> The next question is if the keyboard will still actually
>> work after suspend/resume with "i8042.dumbkbd=1". If it
>> stays in the list, but no longer works then there is
>> a problem with the i8042 controller; or interrupt
>> delivery to the i8042 controller.
>>
>> If "i8042.dumbkbd=1" somehow fully fixes things, then I guess
>> my atkbd driver fix for other laptop keyboards is somehow
>> causing issues for yours.
>
> Just a quick feedback, that booting with `i8042.dumbkbd=1` seems to fix the issue.
>
>> If "i8042.dumbkbd=1" fully fixes things, can you try building
>> your own 6.7.0 kernel with commit 936e4d49ecbc:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=936e4d49ecbc8c404790504386e1422b599dec39
>>
>> reverted?
>
> I am going to try that as soon as possible.
Ok, thank you.
I'm a bit surprised that my fix which skips sending
the getid command to the kbd during init would actually
cause this issue.
Can you retest with an unmodified 6.7.0 to make sure
that this was not some onetime glitch ?
Regards,
Hans
>>> [ 1.435071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>>> [ 1.435409] i8042: Warning: Keylock active
>>> [ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1
>>> [ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12
>>> […]
>>> [ 1.439743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>>>
>>> $ sudo libinput list-devices
>>> […]
>>> Device: AT Translated Set 2 keyboard
>>> Kernel: /dev/input/event0
>>> Group: 15
>>> Seat: seat0, default
>>> Capabilities: keyboard
>>> Tap-to-click: n/a
>>> Tap-and-drag: n/a
>>> Tap drag lock: n/a
>>> Left-handed: n/a
>>> Nat.scrolling: n/a
>>> Middle emulation: n/a
>>> Calibration: n/a
>>> Scroll methods: none
>>> Click methods: none
>>> Disable-w-typing: n/a
>>> Disable-w-trackpointing: n/a
>>> Accel profiles: n/a
>>> Rotation: 0.0
>>>
>>> `libinput list-devices` does not list the device after resuming
>>> from S3. Some of the function keys, like brightness and airplane
>>> mode keys, still work, as the events are probably transmitted over
>>> the embedded controller or some other mechanism. An external USB
>>> keyboard also still works.
>>>
>>> I haven’t had time to further analyze this, but wanted to report
>>> it. No idea
>>>
>>>
>>> Kind regards,
>>>
>>> Paul
>>>
>>>
>>> ¹ s2idle is not working correctly on the device, in the sense, that
>>> energy usage is very high in that state, and the full battery is at
>>> 20 % after leaving it for eight hours.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-21 14:26 ` Paul Menzel
2024-01-21 14:39 ` Hans de Goede
@ 2024-01-22 13:43 ` Hans de Goede
2024-01-26 7:03 ` Paul Menzel
1 sibling, 1 reply; 14+ messages in thread
From: Hans de Goede @ 2024-01-22 13:43 UTC (permalink / raw)
To: Paul Menzel
Cc: linux-input, linux-pm, Dell.Client.Kernel, regressions, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 4211 bytes --]
Hi Paul,
On 1/21/24 15:26, Paul Menzel wrote:
> Dear Hans,
>
>
> As always thank you very much for taking the time to reply.
>
>
> Am 20.01.24 um 21:26 schrieb Hans de Goede:
>
>> On 1/18/24 13:57, Paul Menzel wrote:
>>> #regzbot introduced v6.6.11..v6.7
>
>>> There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360 (Intel i7-7500U).
>>>
>>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>>>
>>> The PS/2 keyboard goes missing after S3 resume¹. The problem does not happen with Linux 6.6.11.
>>
>> Thank you for reporting this.
>>
>> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>>
>> This should at least lead to the device not disappearing from
>>
>> "sudo libinput list-devices"
>>
>> The next question is if the keyboard will still actually
>> work after suspend/resume with "i8042.dumbkbd=1". If it
>> stays in the list, but no longer works then there is
>> a problem with the i8042 controller; or interrupt
>> delivery to the i8042 controller.
>>
>> If "i8042.dumbkbd=1" somehow fully fixes things, then I guess
>> my atkbd driver fix for other laptop keyboards is somehow
>> causing issues for yours.
>
> Just a quick feedback, that booting with `i8042.dumbkbd=1` seems to fix the issue.
>
>> If "i8042.dumbkbd=1" fully fixes things, can you try building
>> your own 6.7.0 kernel with commit 936e4d49ecbc:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=936e4d49ecbc8c404790504386e1422b599dec39
>>
>> reverted?
>
> I am going to try that as soon as possible.
Assuming this was not some one time glitch with 6.7.0,
I have prepared a patch hopefully fixing this (1) as well
as a follow up fix to address another potential issue which
I have noticed.
Can you please give a 6.7.0 (2) kernel with the 2 attached
patches added a try ?
I know building kernels can be a bit of work / takes time,
sorry. If you are short on time I would prefer testing these 2
patches and see if they fix things over trying a plain revert.
Regards,
Hans
1) Assuming it is caused by this commit in the first place,
which seems likely
2) 6.8-rc1 has a follow up patch which is squashed into the
first patch here, so these patches will only apply cleanly
to 6.7.0 .
>>> [ 1.435071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>>> [ 1.435409] i8042: Warning: Keylock active
>>> [ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1
>>> [ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12
>>> […]
>>> [ 1.439743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>>>
>>> $ sudo libinput list-devices
>>> […]
>>> Device: AT Translated Set 2 keyboard
>>> Kernel: /dev/input/event0
>>> Group: 15
>>> Seat: seat0, default
>>> Capabilities: keyboard
>>> Tap-to-click: n/a
>>> Tap-and-drag: n/a
>>> Tap drag lock: n/a
>>> Left-handed: n/a
>>> Nat.scrolling: n/a
>>> Middle emulation: n/a
>>> Calibration: n/a
>>> Scroll methods: none
>>> Click methods: none
>>> Disable-w-typing: n/a
>>> Disable-w-trackpointing: n/a
>>> Accel profiles: n/a
>>> Rotation: 0.0
>>>
>>> `libinput list-devices` does not list the device after resuming
>>> from S3. Some of the function keys, like brightness and airplane
>>> mode keys, still work, as the events are probably transmitted over
>>> the embedded controller or some other mechanism. An external USB
>>> keyboard also still works.
>>>
>>> I haven’t had time to further analyze this, but wanted to report
>>> it. No idea
>>>
>>>
>>> Kind regards,
>>>
>>> Paul
>>>
>>>
>>> ¹ s2idle is not working correctly on the device, in the sense, that
>>> energy usage is very high in that state, and the full battery is at
>>> 20 % after leaving it for eight hours.
>
[-- Attachment #2: 0001-Input-atkbd-Skip-ATKBD_CMD_SETLEDS-when-skipping-ATK.patch --]
[-- Type: text/x-patch, Size: 2981 bytes --]
From 067f89e34264617dd22b0cb850c7996c93152cd1 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 16 Jan 2024 21:43:25 +0100
Subject: [PATCH 1/2] Input: atkbd - Skip ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") the keyboard on a Dell XPS 13 9360 has stopped
working after a suspend/resume.
The problem appears to be that atkbd_probe() fails when called
from atkbd_reconnect() on resume, which on systems where
ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS
failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was
skipped is weird, but apparently that is what is happening.
Fix this by also skipping ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/input/keyboard/atkbd.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 786f00f6b7fd..c229bd6b3f7f 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -791,9 +791,9 @@ static bool atkbd_is_portable_device(void)
* not work. So in this case simply assume a keyboard is connected to avoid
* confusing some laptop keyboards.
*
- * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is
- * ok in translated mode, only atkbd_select_set() checks atkbd->id and in
- * translated mode that is a no-op.
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard
+ * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id
+ * and in translated mode that is a no-op.
*/
static bool atkbd_skip_getid(struct atkbd *atkbd)
{
@@ -824,6 +824,11 @@ static int atkbd_probe(struct atkbd *atkbd)
"keyboard reset failed on %s\n",
ps2dev->serio->phys);
+ if (atkbd_skip_getid(atkbd)) {
+ atkbd->id = 0xab83;
+ return 0;
+ }
+
/*
* Then we check the keyboard ID. We should get 0xab83 under normal conditions.
* Some keyboards report different values, but the first byte is always 0xab or
@@ -832,10 +837,10 @@ static int atkbd_probe(struct atkbd *atkbd)
*/
param[0] = param[1] = 0xa5; /* initialize with invalid values */
- if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+ if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
/*
- * If the get ID command was skipped or failed, we check if we can at least set
+ * If the get ID command failed, we check if we can at least set
* the LEDs on the keyboard. This should work on every keyboard out there.
* It also turns the LEDs off, which we want anyway.
*/
--
2.43.0
[-- Attachment #3: 0002-Input-atkbd-Do-not-skip-atkbd_deactivate-when-skippi.patch --]
[-- Type: text/x-patch, Size: 1493 bytes --]
From bb6435baea52f66e7aaca43520bdb1f71a181a5e Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 22 Jan 2024 14:32:16 +0100
Subject: [PATCH 2/2] Input: atkbd - Do not skip atkbd_deactivate() when
skipping ATKBD_CMD_GETID
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") not only the getid command is skipped, but also
the de-activating of the keyboard at the end of atkbd_probe(), potentially
re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd -
fix multi-byte scancode handling on reconnect").
Make sure multi-byte scancode handling on reconnect is still handled
correctly by not skipping the atkbd_deactivate() call.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/input/keyboard/atkbd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index c229bd6b3f7f..7f67f9f2946b 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -826,7 +826,7 @@ static int atkbd_probe(struct atkbd *atkbd)
if (atkbd_skip_getid(atkbd)) {
atkbd->id = 0xab83;
- return 0;
+ goto deactivate_kbd;
}
/*
@@ -863,6 +863,7 @@ static int atkbd_probe(struct atkbd *atkbd)
return -1;
}
+deactivate_kbd:
/*
* Make sure nothing is coming from the keyboard and disturbs our
* internal state.
--
2.43.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-22 13:43 ` Hans de Goede
@ 2024-01-26 7:03 ` Paul Menzel
2024-01-26 13:32 ` Hans de Goede
0 siblings, 1 reply; 14+ messages in thread
From: Paul Menzel @ 2024-01-26 7:03 UTC (permalink / raw)
To: Hans de Goede
Cc: linux-input, linux-pm, Dell.Client.Kernel, regressions, linux-kernel
Dear Hans,
Thank you for your reply, and sorry for the delay on my side. I needed
to set up an environment to easily build the Linux kernel.
Am 22.01.24 um 14:43 schrieb Hans de Goede:
> On 1/21/24 15:26, Paul Menzel wrote:
[…]
>> Am 20.01.24 um 21:26 schrieb Hans de Goede:
>>
>>> On 1/18/24 13:57, Paul Menzel wrote:
>>>> #regzbot introduced v6.6.11..v6.7
>>
>>>> There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360 (Intel i7-7500U).
>>>>
>>>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>>>>
>>>> The PS/2 keyboard goes missing after S3 resume¹. The problem does not happen with Linux 6.6.11.
>>>
>>> Thank you for reporting this.
>>>
>>> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>>>
>>> This should at least lead to the device not disappearing from
>>>
>>> "sudo libinput list-devices"
>>>
>>> The next question is if the keyboard will still actually
>>> work after suspend/resume with "i8042.dumbkbd=1". If it
>>> stays in the list, but no longer works then there is
>>> a problem with the i8042 controller; or interrupt
>>> delivery to the i8042 controller.
>>>
>>> If "i8042.dumbkbd=1" somehow fully fixes things, then I guess
>>> my atkbd driver fix for other laptop keyboards is somehow
>>> causing issues for yours.
>>
>> Just a quick feedback, that booting with `i8042.dumbkbd=1` seems to fix the issue.
>>
>>> If "i8042.dumbkbd=1" fully fixes things, can you try building
>>> your own 6.7.0 kernel with commit 936e4d49ecbc:
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=936e4d49ecbc8c404790504386e1422b599dec39
>>>
>>> reverted?
>>
>> I am going to try that as soon as possible.
>
> Assuming this was not some one time glitch with 6.7.0,
> I have prepared a patch hopefully fixing this (1) as well
> as a follow up fix to address another potential issue which
> I have noticed.
Unfortunately, it wasn’t just a glitch.
> Can you please give a 6.7.0 (2) kernel with the 2 attached
> patches added a try ?
>
> I know building kernels can be a bit of work / takes time,
> sorry. If you are short on time I would prefer testing these 2
> patches and see if they fix things over trying a plain revert.
Applying both patches on v6.7.1
$ git log --oneline -3
053fa44c0de1 (HEAD -> v6.7.1) Input: atkbd - Do not skip
atkbd_deactivate() when skipping ATKBD_CMD_GETID
0e0fa0113c7a Input: atkbd - Skip ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID
a91fdae50a6d (tag: v6.7.1, stable/linux-6.7.y, origin/linux-6.7.y)
Linux 6.7.1
I am unable to reproduce the problem in eight ACPI S3 suspend/resume
cycles. The DMAR errors [3] are also gone:
$ sudo dmesg --level alert,crit,err,warn
[ 0.065292] MDS CPU bug present and SMT on, data leak possible.
See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html
for more details.
[ 0.065292] MMIO Stale Data CPU bug present and SMT on, data
leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html
for more details.
[ 0.092064] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.294522] hpet_acpi_add: no address or irqs in _CRS
[ 0.345003] i8042: Warning: Keylock active
[ 1.063807] usb: port power management may be unreliable
[ 1.178339] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is
disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 37.712916] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query
control method not found
[ 67.307070] warning: `atop' uses wireless extensions which will
stop working for Wi-Fi 7 hardware; use nl80211
[ 141.861803] ACPI Error: AE_BAD_PARAMETER, Returned by Handler
for [EmbeddedControl] (20230628/evregion-300)
[ 141.861808] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECR1
due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529)
[ 141.861814] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECR2
due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529)
[ 141.861818] ACPI Error: Aborting method \ECRW due to previous
error (AE_BAD_PARAMETER) (20230628/psparse-529)
[ 141.861821] ACPI Error: Aborting method \ECG1 due to previous
error (AE_BAD_PARAMETER) (20230628/psparse-529)
[ 141.861824] ACPI Error: Aborting method \NEVT due to previous
error (AE_BAD_PARAMETER) (20230628/psparse-529)
[ 141.861827] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66
due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529)
Please tell me, if I can do anything else.
Kind regards,
Paul
> 1) Assuming it is caused by this commit in the first place,
> which seems likely
>
> 2) 6.8-rc1 has a follow up patch which is squashed into the
> first patch here, so these patches will only apply cleanly
> to 6.7.0 .
[3]:
https://lore.kernel.org/all/9a24c335-8ec5-48c9-9bdd-b0dac5ecbca8@molgen.mpg.de/
>>>> [ 1.435071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>>>> [ 1.435409] i8042: Warning: Keylock active
>>>> [ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> [ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> […]
>>>> [ 1.439743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>>>>
>>>> $ sudo libinput list-devices
>>>> […]
>>>> Device: AT Translated Set 2 keyboard
>>>> Kernel: /dev/input/event0
>>>> Group: 15
>>>> Seat: seat0, default
>>>> Capabilities: keyboard
>>>> Tap-to-click: n/a
>>>> Tap-and-drag: n/a
>>>> Tap drag lock: n/a
>>>> Left-handed: n/a
>>>> Nat.scrolling: n/a
>>>> Middle emulation: n/a
>>>> Calibration: n/a
>>>> Scroll methods: none
>>>> Click methods: none
>>>> Disable-w-typing: n/a
>>>> Disable-w-trackpointing: n/a
>>>> Accel profiles: n/a
>>>> Rotation: 0.0
>>>>
>>>> `libinput list-devices` does not list the device after resuming
>>>> from S3. Some of the function keys, like brightness and airplane
>>>> mode keys, still work, as the events are probably transmitted over
>>>> the embedded controller or some other mechanism. An external USB
>>>> keyboard also still works.
>>>>
>>>> I haven’t had time to further analyze this, but wanted to report
>>>> it. No idea
>>>>
>>>>
>>>> Kind regards,
>>>>
>>>> Paul
>>>>
>>>>
>>>> ¹ s2idle is not working correctly on the device, in the sense, that
>>>> energy usage is very high in that state, and the full battery is at
>>>> 20 % after leaving it for eight hours.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-26 7:03 ` Paul Menzel
@ 2024-01-26 13:32 ` Hans de Goede
2024-01-26 15:58 ` Hans de Goede
0 siblings, 1 reply; 14+ messages in thread
From: Hans de Goede @ 2024-01-26 13:32 UTC (permalink / raw)
To: Paul Menzel
Cc: linux-input, linux-pm, Dell.Client.Kernel, regressions, linux-kernel
Hi Paul,
On 1/26/24 08:03, Paul Menzel wrote:
> Dear Hans,
>
>
> Thank you for your reply, and sorry for the delay on my side. I needed to set up an environment to easily build the Linux kernel.
No problem thank you for testing this.
> Am 22.01.24 um 14:43 schrieb Hans de Goede:
>
>> On 1/21/24 15:26, Paul Menzel wrote:
>
> […]
>
>>> Am 20.01.24 um 21:26 schrieb Hans de Goede:
>>>
>>>> On 1/18/24 13:57, Paul Menzel wrote:
>>>>> #regzbot introduced v6.6.11..v6.7
>>>
>>>>> There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360 (Intel i7-7500U).
>>>>>
>>>>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>>>>>
>>>>> The PS/2 keyboard goes missing after S3 resume¹. The problem does not happen with Linux 6.6.11.
>>>>
>>>> Thank you for reporting this.
>>>>
>>>> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>>>>
>>>> This should at least lead to the device not disappearing from
>>>>
>>>> "sudo libinput list-devices"
>>>>
>>>> The next question is if the keyboard will still actually
>>>> work after suspend/resume with "i8042.dumbkbd=1". If it
>>>> stays in the list, but no longer works then there is
>>>> a problem with the i8042 controller; or interrupt
>>>> delivery to the i8042 controller.
>>>>
>>>> If "i8042.dumbkbd=1" somehow fully fixes things, then I guess
>>>> my atkbd driver fix for other laptop keyboards is somehow
>>>> causing issues for yours.
>>>
>>> Just a quick feedback, that booting with `i8042.dumbkbd=1` seems to fix the issue.
>>>
>>>> If "i8042.dumbkbd=1" fully fixes things, can you try building
>>>> your own 6.7.0 kernel with commit 936e4d49ecbc:
>>>>
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=936e4d49ecbc8c404790504386e1422b599dec39
>>>>
>>>> reverted?
>>>
>>> I am going to try that as soon as possible.
>>
>> Assuming this was not some one time glitch with 6.7.0,
>> I have prepared a patch hopefully fixing this (1) as well
>> as a follow up fix to address another potential issue which
>> I have noticed.
>
> Unfortunately, it wasn’t just a glitch.
>
>> Can you please give a 6.7.0 (2) kernel with the 2 attached
>> patches added a try ?
>>
>> I know building kernels can be a bit of work / takes time,
>> sorry. If you are short on time I would prefer testing these 2
>> patches and see if they fix things over trying a plain revert.
>
> Applying both patches on v6.7.1
>
> $ git log --oneline -3
> 053fa44c0de1 (HEAD -> v6.7.1) Input: atkbd - Do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
> 0e0fa0113c7a Input: atkbd - Skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
> a91fdae50a6d (tag: v6.7.1, stable/linux-6.7.y, origin/linux-6.7.y) Linux 6.7.1
>
> I am unable to reproduce the problem in eight ACPI S3 suspend/resume cycles. The DMAR errors [3] are also gone:
Thanks.
So thinking more about this I think the DMAR errors are actually the real cause of the issue here, specifically if we replace: f0 with 00 (I guess DMAR uses the high bits for its own purposes) in
`[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
then the device ID is 00:1f.0 which is the ISA bridge and [INTR-REMAP] errors are known to disable interrupts. The PS/2 controller (which sits behind the ISA bridge) interrupt getting disabled would explain the suspend/resume keyboard issue better then the atkbd.c changes I have been focusing on.
So then the question becomes why does the 6.7.1 kernel not show the DMAR errors. I don't see anything between 6.7.0 and 6.7.1 which explains this. But maybe your local build is using a different configuration which explains this.
Can you try your local 6.7.1 build without my 2 patches? The quickest way to do that would be to run: "git reset --hard HEAD~2" and then re-run the make commandos, this will re-use your previous build so it should be pretty quick.
If things still work after that then the problem is not with the atkbd code.
Regards,
Hans
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-26 13:32 ` Hans de Goede
@ 2024-01-26 15:58 ` Hans de Goede
0 siblings, 0 replies; 14+ messages in thread
From: Hans de Goede @ 2024-01-26 15:58 UTC (permalink / raw)
To: Paul Menzel
Cc: linux-input, linux-pm, Dell.Client.Kernel, regressions, linux-kernel
Hi Paul,
On 1/26/24 14:32, Hans de Goede wrote:
> Hi Paul,
>
> On 1/26/24 08:03, Paul Menzel wrote:
>> Dear Hans,
>>
>>
>> Thank you for your reply, and sorry for the delay on my side. I needed to set up an environment to easily build the Linux kernel.
>
> No problem thank you for testing this.
>
>> Am 22.01.24 um 14:43 schrieb Hans de Goede:
>>
>>> On 1/21/24 15:26, Paul Menzel wrote:
>>
>> […]
>>
>>>> Am 20.01.24 um 21:26 schrieb Hans de Goede:
>>>>
>>>>> On 1/18/24 13:57, Paul Menzel wrote:
>>>>>> #regzbot introduced v6.6.11..v6.7
>>>>
>>>>>> There seems to be a regression in Linux 6.7 on the Dell XPS 13 9360 (Intel i7-7500U).
>>>>>>
>>>>>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>>>>>>
>>>>>> The PS/2 keyboard goes missing after S3 resume¹. The problem does not happen with Linux 6.6.11.
>>>>>
>>>>> Thank you for reporting this.
>>>>>
>>>>> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>>>>>
>>>>> This should at least lead to the device not disappearing from
>>>>>
>>>>> "sudo libinput list-devices"
>>>>>
>>>>> The next question is if the keyboard will still actually
>>>>> work after suspend/resume with "i8042.dumbkbd=1". If it
>>>>> stays in the list, but no longer works then there is
>>>>> a problem with the i8042 controller; or interrupt
>>>>> delivery to the i8042 controller.
>>>>>
>>>>> If "i8042.dumbkbd=1" somehow fully fixes things, then I guess
>>>>> my atkbd driver fix for other laptop keyboards is somehow
>>>>> causing issues for yours.
>>>>
>>>> Just a quick feedback, that booting with `i8042.dumbkbd=1` seems to fix the issue.
>>>>
>>>>> If "i8042.dumbkbd=1" fully fixes things, can you try building
>>>>> your own 6.7.0 kernel with commit 936e4d49ecbc:
>>>>>
>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=936e4d49ecbc8c404790504386e1422b599dec39
>>>>>
>>>>> reverted?
>>>>
>>>> I am going to try that as soon as possible.
>>>
>>> Assuming this was not some one time glitch with 6.7.0,
>>> I have prepared a patch hopefully fixing this (1) as well
>>> as a follow up fix to address another potential issue which
>>> I have noticed.
>>
>> Unfortunately, it wasn’t just a glitch.
>>
>>> Can you please give a 6.7.0 (2) kernel with the 2 attached
>>> patches added a try ?
>>>
>>> I know building kernels can be a bit of work / takes time,
>>> sorry. If you are short on time I would prefer testing these 2
>>> patches and see if they fix things over trying a plain revert.
>>
>> Applying both patches on v6.7.1
>>
>> $ git log --oneline -3
>> 053fa44c0de1 (HEAD -> v6.7.1) Input: atkbd - Do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
>> 0e0fa0113c7a Input: atkbd - Skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
>> a91fdae50a6d (tag: v6.7.1, stable/linux-6.7.y, origin/linux-6.7.y) Linux 6.7.1
>>
>> I am unable to reproduce the problem in eight ACPI S3 suspend/resume cycles. The DMAR errors [3] are also gone:
>
> Thanks.
>
> So thinking more about this I think the DMAR errors are actually the real cause of the issue here, specifically if we replace: f0 with 00 (I guess DMAR uses the high bits for its own purposes) in
>
> `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
>
> then the device ID is 00:1f.0 which is the ISA bridge and [INTR-REMAP] errors are known to disable interrupts. The PS/2 controller (which sits behind the ISA bridge) interrupt getting disabled would explain the suspend/resume keyboard issue better then the atkbd.c changes I have been focusing on.
>
> So then the question becomes why does the 6.7.1 kernel not show the DMAR errors. I don't see anything between 6.7.0 and 6.7.1 which explains this. But maybe your local build is using a different configuration which explains this.
>
> Can you try your local 6.7.1 build without my 2 patches? The quickest way to do that would be to run: "git reset --hard HEAD~2" and then re-run the make commandos, this will re-use your previous build so it should be pretty quick.
>
> If things still work after that then the problem is not with the atkbd code.
Never mind I just became aware of a bunch of other reports which don't have
the DMAR errors on resume, so I'm submitting the 2 fixes for this upstream
now.
Regards,
Hans
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-18 12:57 PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Paul Menzel
2024-01-18 21:37 ` Christian A. Ehrhardt
2024-01-20 20:26 ` Hans de Goede
@ 2024-01-27 8:12 ` Linux regression tracking #update (Thorsten Leemhuis)
2024-02-02 8:05 ` Linux regression tracking #update (Thorsten Leemhuis)
2 siblings, 1 reply; 14+ messages in thread
From: Linux regression tracking #update (Thorsten Leemhuis) @ 2024-01-27 8:12 UTC (permalink / raw)
To: LKML; +Cc: linux-input, linux-pm, regressions
On 18.01.24 13:57, Paul Menzel wrote:
> #regzbot introduced v6.6.11..v6.7
#regzbot introduced 936e4d49ecbc
#regzbot ignore-activity
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3
2024-01-27 8:12 ` PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Linux regression tracking #update (Thorsten Leemhuis)
@ 2024-02-02 8:05 ` Linux regression tracking #update (Thorsten Leemhuis)
0 siblings, 0 replies; 14+ messages in thread
From: Linux regression tracking #update (Thorsten Leemhuis) @ 2024-02-02 8:05 UTC (permalink / raw)
To: LKML; +Cc: linux-input, linux-pm, regressions
On 27.01.24 09:12, Linux regression tracking #update (Thorsten Leemhuis)
wrote:
> On 18.01.24 13:57, Paul Menzel wrote:
>> #regzbot introduced v6.6.11..v6.7
>
> #regzbot introduced 936e4d49ecbc
> #regzbot ignore-activity
#regzbot monitor:
https://lore.kernel.org/all/20240126160724.13278-1-hdegoede@redhat.com/
#regzbot fix: 683cd8259a9b883a51
#regzbot ignore-activity
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.
^ permalink raw reply [flat|nested] 14+ messages in thread
* + XPS 13 9343
2024-01-20 20:26 ` Hans de Goede
2024-01-21 14:26 ` Paul Menzel
@ 2024-02-03 16:16 ` Antoine
2024-02-04 7:24 ` Hans de Goede
1 sibling, 1 reply; 14+ messages in thread
From: Antoine @ 2024-02-03 16:16 UTC (permalink / raw)
To: hdegoede
Cc: Dell.Client.Kernel, linux-input, linux-kernel, linux-pm, pmenzel,
regressions, 1061521
On 1/20/24 21:26, Hans de Goede wrote:
> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>
> The next question is if the keyboard will still actually
> work after suspend/resume with "i8042.dumbkbd=1". If it
> stays in the list, but no longer works
Hi, thanks a lot for taking into account our hardware,
just a supplementary feedback:
In my case (Dell XPS 13 9343/i5-5200U):
- Dell Inc. XPS 13 9343/0TM99H, BIOS A19 12/24/2018
- Linux version 6.6.13-1 (2024-01-20)
commandline with `i8042.dumbkbd=1` fixes the issue,
with capslock functional but without led
+ as a side note, hibernate doesn't trigger any issue
(before getting informed of and testing `i8042.dumbkbd=1`)
I had attached logs before/after suspend against 6.6.11 and 6.6.13 :
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1061521#30
I remain at your disposal for any further infos/testing
best regards,
Antoine
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: + XPS 13 9343
2024-02-03 16:16 ` + XPS 13 9343 Antoine
@ 2024-02-04 7:24 ` Hans de Goede
2024-02-04 13:18 ` Antoine
0 siblings, 1 reply; 14+ messages in thread
From: Hans de Goede @ 2024-02-04 7:24 UTC (permalink / raw)
To: Antoine
Cc: Dell.Client.Kernel, linux-input, linux-kernel, linux-pm, pmenzel,
regressions, 1061521
Hi Antoine,
On 2/3/24 17:16, Antoine wrote:
> On 1/20/24 21:26, Hans de Goede wrote:
>> Can you try adding "i8042.dumbkbd=1" to your kernel commandline?
>>
>> The next question is if the keyboard will still actually
>> work after suspend/resume with "i8042.dumbkbd=1". If it
>> stays in the list, but no longer works
>
> Hi, thanks a lot for taking into account our hardware,
> just a supplementary feedback:
>
> In my case (Dell XPS 13 9343/i5-5200U):
> - Dell Inc. XPS 13 9343/0TM99H, BIOS A19 12/24/2018
> - Linux version 6.6.13-1 (2024-01-20)
>
> commandline with `i8042.dumbkbd=1` fixes the issue,
> with capslock functional but without led
> + as a side note, hibernate doesn't trigger any issue
>
> (before getting informed of and testing `i8042.dumbkbd=1`)
> I had attached logs before/after suspend against 6.6.11 and 6.6.13 :
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1061521#30
>
> I remain at your disposal for any further infos/testing
The issue of the kbd on some Dell XPS models no longer
working after a suspend/resume cycle should be fixed by
these 2 patches which are on their way to Linus' tree:
https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/commit/?h=for-linus&id=683cd8259a9b883a51973511f860976db2550a6e
https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/commit/?h=for-linus&id=9cf6e24c9fbf17e52de9fff07f12be7565ea6d61
Regards,
Hans
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: + XPS 13 9343
2024-02-04 7:24 ` Hans de Goede
@ 2024-02-04 13:18 ` Antoine
0 siblings, 0 replies; 14+ messages in thread
From: Antoine @ 2024-02-04 13:18 UTC (permalink / raw)
To: 1061521, hdegoede
Cc: Dell.Client.Kernel, linux-input, linux-kernel, linux-pm, pmenzel,
regressions
[-- Attachment #1: Type: text/plain, Size: 868 bytes --]
On 2/4/24 08:24, Hans de Goede wrote:
> The issue of the kbd on some Dell XPS models no longer
> working after a suspend/resume cycle should be fixed by
> these 2 patches which are on their way to Linus' tree:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/commit/?h=for-linus&id=683cd8259a9b883a51973511f860976db2550a6e
> https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/commit/?h=for-linus&id=9cf6e24c9fbf17e52de9fff07f12be7565ea6d61
Hi Hans, and thanks,
Just completing my feedback, I am also unable to reproduce the problem
in eight ACPI S3 suspend/resume cycles on my XPS 13 9343;
Tested from Linus' tree on 6.8.0-rc2 (cf attached dmesg)
And on top of debian's testing,unstable one 6.6.13-1,
with attached patch (thus including initial patch "Input: atkbd - skip
ATKBD_CMD_GETID in translated mode")
best regards,
Antoine
[-- Attachment #2: 99_fix_keyboard_after_resume_on_dell_xps13-9343-9350-9360-9370.patch --]
[-- Type: text/x-patch, Size: 1865 bytes --]
diff -Naur 6.6.13-1_debian/drivers/input/keyboard/atkbd.c 6.8.0-rc2/drivers/input/keyboard/atkbd.c
--- 6.6.13-1/drivers/input/keyboard/atkbd.c 2024-01-20 11:51:49.000000000 +0100
+++ 6.8.0-rc2/drivers/input/keyboard/atkbd.c 2024-02-04 08:13:05.273965270 +0100
@@ -791,9 +791,9 @@
* not work. So in this case simply assume a keyboard is connected to avoid
* confusing some laptop keyboards.
*
- * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is
- * ok in translated mode, only atkbd_select_set() checks atkbd->id and in
- * translated mode that is a no-op.
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard
+ * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id
+ * and in translated mode that is a no-op.
*/
static bool atkbd_skip_getid(struct atkbd *atkbd)
{
@@ -824,6 +824,11 @@
"keyboard reset failed on %s\n",
ps2dev->serio->phys);
+ if (atkbd_skip_getid(atkbd)) {
+ atkbd->id = 0xab83;
+ goto deactivate_kbd;
+ }
+
/*
* Then we check the keyboard ID. We should get 0xab83 under normal conditions.
* Some keyboards report different values, but the first byte is always 0xab or
@@ -832,10 +837,10 @@
*/
param[0] = param[1] = 0xa5; /* initialize with invalid values */
- if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+ if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
/*
- * If the get ID command was skipped or failed, we check if we can at least set
+ * If the get ID command failed, we check if we can at least set
* the LEDs on the keyboard. This should work on every keyboard out there.
* It also turns the LEDs off, which we want anyway.
*/
@@ -858,6 +863,7 @@
return -1;
}
+deactivate_kbd:
/*
* Make sure nothing is coming from the keyboard and disturbs our
* internal state.
[-- Attachment #3: dmesg.log --]
[-- Type: text/x-log, Size: 78253 bytes --]
[ 0.000000] Linux version 6.8.0-rc2-xps13-9343_2 (me@zx) (gcc (Debian 13.2.0-10) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.90.20240122) #10 SMP PREEMPT_DYNAMIC Sun Feb 4 06:20:31 CET 2024
[ 0.000000] Command line: \\boot\vmlinuz-6.8.0-rc2-xps13-9343_2 ro root=UUID=f88efbd2-19f5-4f2f-a8ce-6c1e1255119b initrd=boot\initrd.img-6.8.0-rc2-xps13-9343_2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d97fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7d98000-0x00000000c8255fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8256000-0x00000000dadcffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dadd0000-0x00000000dae92fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae93000-0x00000000daebcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000daebd000-0x00000000db7f4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db7f5000-0x00000000dbafefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbaff000-0x00000000dbafffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xc4385018-0xc4395057] usable ==> usable
[ 0.000000] e820: update [mem 0xc4385018-0xc4395057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c4385017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c4385018-0x00000000c4395057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c4395058-0x00000000c7d97fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c7d98000-0x00000000c8255fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c8256000-0x00000000dadcffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dadd0000-0x00000000dae92fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dae93000-0x00000000daebcfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000daebd000-0x00000000db7f4fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000db7f5000-0x00000000dbafefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dbaff000-0x00000000dbafffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f7fffff] usable
[ 0.000000] efi: EFI v2.3.1 by American Megatrends
[ 0.000000] efi: ACPI=0xdae9c000 ACPI 2.0=0xdae9c000 SMBIOS=0xf0570 INITRD=0xc449cf98
[ 0.000000] efi: Remove mem42: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Not removing mem43: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem44: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[ 0.000000] efi: Not removing mem45: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map
[ 0.000000] efi: Not removing mem46: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem47: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9343/0TM99H, BIOS A19 12/24/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.720 MHz processor
[ 0.000841] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000844] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000853] last_pfn = 0x21f800 max_arch_pfn = 0x400000000
[ 0.000858] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
[ 0.000860] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001166] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.001170] last_pfn = 0xdbb00 max_arch_pfn = 0x400000000
[ 0.009581] found SMP MP-table at [mem 0x000fda50-0x000fda5f]
[ 0.009599] Using GB pages for direct mapping
[ 0.010203] Secure boot disabled
[ 0.010203] RAMDISK: [mem 0xc08e4000-0xc2a93fff]
[ 0.010208] ACPI: Early table checksum verification disabled
[ 0.010211] ACPI: RSDP 0x00000000DAE9C000 000024 (v02 DELL )
[ 0.010215] ACPI: XSDT 0x00000000DAE9C0A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.010222] ACPI: FACP 0x00000000DAEAF748 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.010227] ACPI: DSDT 0x00000000DAE9C200 013544 (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.010231] ACPI: FACS 0x00000000DB7F2F80 000040
[ 0.010234] ACPI: APIC 0x00000000DAEAF858 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.010237] ACPI: FPDT 0x00000000DAEAF8E0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.010241] ACPI: FIDT 0x00000000DAEAF928 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.010244] ACPI: MCFG 0x00000000DAEAF9C8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.010247] ACPI: HPET 0x00000000DAEAFA08 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.010251] ACPI: SSDT 0x00000000DAEAFA40 000455 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.010254] ACPI: UEFI 0x00000000DAEAFE98 000042 (v01 00000000 00000000)
[ 0.010258] ACPI: SSDT 0x00000000DAEAFEE0 000CDB (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.010262] ACPI: ASF! 0x00000000DAEB0BC0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.010265] ACPI: SSDT 0x00000000DAEB0C60 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.010269] ACPI: SSDT 0x00000000DAEB1180 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.010272] ACPI: SSDT 0x00000000DAEB1CF8 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
[ 0.010276] ACPI: SSDT 0x00000000DAEB1EC0 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.010279] ACPI: PCCT 0x00000000DAEB2268 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.010282] ACPI: SSDT 0x00000000DAEB22D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.010286] ACPI: SSDT 0x00000000DAEB2DA0 004207 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.010289] ACPI: SSDT 0x00000000DAEB6FA8 004646 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.010293] ACPI: DMAR 0x00000000DAEBB5F0 0000D4 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.010296] ACPI: CSRT 0x00000000DAEBB6C8 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528)
[ 0.010300] ACPI: BGRT 0x00000000DAEBB790 000038 (v00 \xf3\xee 01072009 AMI 00010013)
[ 0.010302] ACPI: Reserving FACP table memory at [mem 0xdaeaf748-0xdaeaf853]
[ 0.010304] ACPI: Reserving DSDT table memory at [mem 0xdae9c200-0xdaeaf743]
[ 0.010305] ACPI: Reserving FACS table memory at [mem 0xdb7f2f80-0xdb7f2fbf]
[ 0.010306] ACPI: Reserving APIC table memory at [mem 0xdaeaf858-0xdaeaf8db]
[ 0.010307] ACPI: Reserving FPDT table memory at [mem 0xdaeaf8e0-0xdaeaf923]
[ 0.010308] ACPI: Reserving FIDT table memory at [mem 0xdaeaf928-0xdaeaf9c3]
[ 0.010308] ACPI: Reserving MCFG table memory at [mem 0xdaeaf9c8-0xdaeafa03]
[ 0.010309] ACPI: Reserving HPET table memory at [mem 0xdaeafa08-0xdaeafa3f]
[ 0.010310] ACPI: Reserving SSDT table memory at [mem 0xdaeafa40-0xdaeafe94]
[ 0.010311] ACPI: Reserving UEFI table memory at [mem 0xdaeafe98-0xdaeafed9]
[ 0.010312] ACPI: Reserving SSDT table memory at [mem 0xdaeafee0-0xdaeb0bba]
[ 0.010313] ACPI: Reserving ASF! table memory at [mem 0xdaeb0bc0-0xdaeb0c5f]
[ 0.010314] ACPI: Reserving SSDT table memory at [mem 0xdaeb0c60-0xdaeb117e]
[ 0.010315] ACPI: Reserving SSDT table memory at [mem 0xdaeb1180-0xdaeb1cf3]
[ 0.010315] ACPI: Reserving SSDT table memory at [mem 0xdaeb1cf8-0xdaeb1ebe]
[ 0.010316] ACPI: Reserving SSDT table memory at [mem 0xdaeb1ec0-0xdaeb2264]
[ 0.010317] ACPI: Reserving PCCT table memory at [mem 0xdaeb2268-0xdaeb22d5]
[ 0.010318] ACPI: Reserving SSDT table memory at [mem 0xdaeb22d8-0xdaeb2d9b]
[ 0.010319] ACPI: Reserving SSDT table memory at [mem 0xdaeb2da0-0xdaeb6fa6]
[ 0.010320] ACPI: Reserving SSDT table memory at [mem 0xdaeb6fa8-0xdaebb5ed]
[ 0.010320] ACPI: Reserving DMAR table memory at [mem 0xdaebb5f0-0xdaebb6c3]
[ 0.010321] ACPI: Reserving CSRT table memory at [mem 0xdaebb6c8-0xdaebb78b]
[ 0.010322] ACPI: Reserving BGRT table memory at [mem 0xdaebb790-0xdaebb7c7]
[ 0.010330] ACPI: DMI detected: DELL XPS 13 (2015) (force ACPI _REV to 5)
[ 0.010381] No NUMA configuration found
[ 0.010382] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
[ 0.010392] NODE_DATA(0) allocated [mem 0x21f7d3000-0x21f7fdfff]
[ 0.010598] Zone ranges:
[ 0.010599] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.010601] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.010602] Normal [mem 0x0000000100000000-0x000000021f7fffff]
[ 0.010604] Device empty
[ 0.010605] Movable zone start for each node
[ 0.010608] Early memory node ranges
[ 0.010609] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.010610] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.010611] node 0: [mem 0x0000000000100000-0x00000000c7d97fff]
[ 0.010613] node 0: [mem 0x00000000c8256000-0x00000000dadcffff]
[ 0.010614] node 0: [mem 0x00000000dbaff000-0x00000000dbafffff]
[ 0.010615] node 0: [mem 0x0000000100000000-0x000000021f7fffff]
[ 0.010616] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
[ 0.010621] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.010622] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.010645] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.016460] On node 0, zone DMA32: 1214 pages in unavailable ranges
[ 0.016494] On node 0, zone DMA32: 3375 pages in unavailable ranges
[ 0.016984] On node 0, zone Normal: 17664 pages in unavailable ranges
[ 0.017005] On node 0, zone Normal: 2048 pages in unavailable ranges
[ 0.017013] Reserving Intel graphics memory at [mem 0xdd800000-0xdf7fffff]
[ 0.017093] ACPI: PM-Timer IO Port: 0x1808
[ 0.017101] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
[ 0.017102] ACPI: NMI not connected to LINT 1!
[ 0.017103] ACPI: LAPIC_NMI (acpi_id[0x02] low level lint[0xff])
[ 0.017104] ACPI: NMI not connected to LINT 1!
[ 0.017105] ACPI: LAPIC_NMI (acpi_id[0x03] res level lint[0x0])
[ 0.017106] ACPI: NMI not connected to LINT 1!
[ 0.017106] ACPI: LAPIC_NMI (acpi_id[0x04] high dfl lint[0x81])
[ 0.017107] ACPI: NMI not connected to LINT 1!
[ 0.017117] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.017120] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.017122] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.017127] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.017128] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.017137] e820: update [mem 0xcdce9000-0xcdd71fff] usable ==> reserved
[ 0.017150] TSC deadline timer available
[ 0.017151] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.017169] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.017171] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.017173] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.017174] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.017175] PM: hibernation: Registered nosave memory: [mem 0xc4385000-0xc4385fff]
[ 0.017177] PM: hibernation: Registered nosave memory: [mem 0xc4395000-0xc4395fff]
[ 0.017179] PM: hibernation: Registered nosave memory: [mem 0xc7d98000-0xc8255fff]
[ 0.017180] PM: hibernation: Registered nosave memory: [mem 0xcdce9000-0xcdd71fff]
[ 0.017182] PM: hibernation: Registered nosave memory: [mem 0xdadd0000-0xdae92fff]
[ 0.017183] PM: hibernation: Registered nosave memory: [mem 0xdae93000-0xdaebcfff]
[ 0.017184] PM: hibernation: Registered nosave memory: [mem 0xdaebd000-0xdb7f4fff]
[ 0.017185] PM: hibernation: Registered nosave memory: [mem 0xdb7f5000-0xdbafefff]
[ 0.017186] PM: hibernation: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
[ 0.017187] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf7fffff]
[ 0.017188] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xfebfffff]
[ 0.017189] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.017189] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.017190] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.017191] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.017192] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.017192] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.017193] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.017194] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.017196] [mem 0xdf800000-0xfebfffff] available for PCI devices
[ 0.017197] Booting paravirtualized kernel on bare hardware
[ 0.017199] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.022408] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.022744] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
[ 0.022752] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
[ 0.022754] pcpu-alloc: [0] 0 1 2 3
[ 0.022777] Kernel command line: \\boot\vmlinuz-6.8.0-rc2-xps13-9343_2 ro root=UUID=f88efbd2-19f5-4f2f-a8ce-6c1e1255119b initrd=boot\initrd.img-6.8.0-rc2-xps13-9343_2
[ 0.022857] random: crng init done
[ 0.023690] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.024111] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.024196] Fallback order for Node 0: 0
[ 0.024200] Built 1 zonelists, mobility grouping on. Total pages: 2040206
[ 0.024201] Policy zone: Normal
[ 0.024208] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.024216] software IO TLB: area num 4.
[ 0.048040] Memory: 3246128K/8291008K available (14336K kernel code, 2331K rwdata, 5832K rodata, 3968K init, 3736K bss, 610708K reserved, 0K cma-reserved)
[ 0.048294] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.048309] Kernel/User page tables isolation: enabled
[ 0.048340] ftrace: allocating 42601 entries in 167 pages
[ 0.056480] ftrace: allocated 167 pages with 5 groups
[ 0.057219] Dynamic Preempt: voluntary
[ 0.057257] rcu: Preemptible hierarchical RCU implementation.
[ 0.057258] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.057259] Trampoline variant of Tasks RCU enabled.
[ 0.057260] Rude variant of Tasks RCU enabled.
[ 0.057260] Tracing variant of Tasks RCU enabled.
[ 0.057261] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.057262] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.060264] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ 0.060455] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.060523] Console: colour dummy device 80x25
[ 0.060526] printk: legacy console [tty0] enabled
[ 0.060962] ACPI: Core revision 20230628
[ 0.061078] ACPI: OSL: Overriding _REV return value to 5
[ 0.061087] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.061089] APIC: Switch to symmetric I/O mode setup
[ 0.061093] DMAR: Host address width 39
[ 0.061095] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.061103] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.061108] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061113] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.061118] DMAR: RMRR base: 0x000000db9f7000 end: 0x000000dba05fff
[ 0.061121] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
[ 0.061124] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[ 0.061128] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061131] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.061133] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.061134] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.061702] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.061707] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.062210] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa2b7126b8, max_idle_ns: 440795311860 ns
[ 0.062221] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.44 BogoMIPS (lpj=8778880)
[ 0.062251] CPU0: Thermal monitoring enabled (TM1)
[ 0.062283] process: using mwait in idle threads
[ 0.062288] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.062291] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.062295] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.062300] Spectre V2 : Mitigation: Retpolines
[ 0.062302] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.062305] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.062308] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.062311] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.062315] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.062318] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.062323] MDS: Mitigation: Clear CPU buffers
[ 0.062325] MMIO Stale Data: Unknown: No mitigations
[ 0.062328] SRBDS: Mitigation: Microcode
[ 0.062334] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.062337] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.062340] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.062343] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.062346] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.066217] Freeing SMP alternatives memory: 36K
[ 0.066217] pid_max: default: 32768 minimum: 301
[ 0.066217] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity
[ 0.066217] landlock: Up and running.
[ 0.066217] Yama: becoming mindful.
[ 0.066217] AppArmor: AppArmor initialized
[ 0.066217] TOMOYO Linux initialized
[ 0.066217] LSM support for eBPF active
[ 0.066217] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.066217] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.066217] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.066217] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.066217] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.066217] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.066217] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.066217] ... version: 3
[ 0.066217] ... bit width: 48
[ 0.066217] ... generic registers: 4
[ 0.066217] ... value mask: 0000ffffffffffff
[ 0.066217] ... max period: 00007fffffffffff
[ 0.066217] ... fixed-purpose events: 3
[ 0.066217] ... event mask: 000000070000000f
[ 0.066217] signal: max sigframe size: 1776
[ 0.066217] Estimated ratio of average max frequency by base frequency (times 1024): 1163
[ 0.066217] rcu: Hierarchical SRCU implementation.
[ 0.066217] rcu: Max phase no-delay instances is 1000.
[ 0.066217] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.066217] smp: Bringing up secondary CPUs ...
[ 0.066217] smpboot: x86: Booting SMP configuration:
[ 0.066217] .... node #0, CPUs: #1 #2 #3
[ 0.066217] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.066217] smp: Brought up 1 node, 4 CPUs
[ 0.066217] smpboot: Max logical packages: 1
[ 0.066217] smpboot: Total of 4 processors activated (17557.76 BogoMIPS)
[ 0.074246] node 0 deferred pages initialised in 8ms
[ 0.074673] devtmpfs: initialized
[ 0.074673] x86/mm: Memory block size: 128MB
[ 0.075145] ACPI: PM: Registering ACPI NVS region [mem 0xdaebd000-0xdb7f4fff] (9666560 bytes)
[ 0.075145] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.075145] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.075145] pinctrl core: initialized pinctrl subsystem
[ 0.075145] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.075320] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.075423] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.075523] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.075535] audit: initializing netlink subsys (disabled)
[ 0.075546] audit: type=2000 audit(1707025022.012:1): state=initialized audit_enabled=0 res=1
[ 0.075546] thermal_sys: Registered thermal governor 'fair_share'
[ 0.075546] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.075546] thermal_sys: Registered thermal governor 'step_wise'
[ 0.075546] thermal_sys: Registered thermal governor 'user_space'
[ 0.075546] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.075546] cpuidle: using governor ladder
[ 0.075546] cpuidle: using governor menu
[ 0.075546] Detected 1 PCC Subspaces
[ 0.075546] Registering PCC driver as Mailbox controller
[ 0.075546] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.075546] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.075546] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.075546] PCI: not using ECAM ([mem 0xf8000000-0xfbffffff] not reserved)
[ 0.075546] PCI: Using configuration type 1 for base access
[ 0.075546] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.078240] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.078244] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.078247] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.078250] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.078305] ACPI: Added _OSI(Module Device)
[ 0.078309] ACPI: Added _OSI(Processor Device)
[ 0.078311] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.078313] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.096445] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.099552] ACPI: Dynamic OEM Table Load:
[ 0.099552] ACPI: SSDT 0xFFFF9AAB01FD6400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.099942] ACPI: Dynamic OEM Table Load:
[ 0.099952] ACPI: SSDT 0xFFFF9AAC17443000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.103354] ACPI: Dynamic OEM Table Load:
[ 0.103363] ACPI: SSDT 0xFFFF9AAB00D71E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.105363] ACPI: _OSC evaluated successfully for all CPUs
[ 0.105486] ACPI: EC: EC started
[ 0.105489] ACPI: EC: interrupt blocked
[ 0.108208] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.108213] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.108217] ACPI: Interpreter enabled
[ 0.108248] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.108250] ACPI: Using IOAPIC for interrupt routing
[ 0.108293] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.108967] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource
[ 0.108978] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.108981] PCI: Using E820 reservations for host bridge windows
[ 0.109497] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.111028] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[ 0.111403] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[ 0.111751] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[ 0.128377] ACPI: \_TZ_.FN00: New power resource
[ 0.128443] ACPI: \_TZ_.FN01: New power resource
[ 0.128503] ACPI: \_TZ_.FN02: New power resource
[ 0.128565] ACPI: \_TZ_.FN03: New power resource
[ 0.128624] ACPI: \_TZ_.FN04: New power resource
[ 0.129390] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.129400] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.129851] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.129855] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.130485] PCI host bridge to bus 0000:00
[ 0.130488] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.130492] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.130495] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.130499] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
[ 0.130502] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.130521] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 conventional PCI endpoint
[ 0.130598] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 conventional PCI endpoint
[ 0.130609] pci 0000:00:02.0: BAR 0 [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.130616] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.130622] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.130636] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.130639] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.130644] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.130761] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[ 0.130772] pci 0000:00:03.0: BAR 0 [mem 0xf721c000-0xf721ffff 64bit]
[ 0.130862] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 conventional PCI endpoint
[ 0.130873] pci 0000:00:04.0: BAR 0 [mem 0xf7210000-0xf7217fff 64bit]
[ 0.130974] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.130990] pci 0000:00:14.0: BAR 0 [mem 0xf7200000-0xf720ffff 64bit]
[ 0.131044] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.131134] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 conventional PCI endpoint
[ 0.131153] pci 0000:00:16.0: BAR 0 [mem 0xf7225000-0xf722501f 64bit]
[ 0.131218] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.131333] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 conventional PCI endpoint
[ 0.131349] pci 0000:00:1b.0: BAR 0 [mem 0xf7218000-0xf721bfff 64bit]
[ 0.131395] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.131504] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 PCIe Root Port
[ 0.131529] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.131535] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.131590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.131820] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 PCIe Root Port
[ 0.131845] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.131851] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.131905] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.132129] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.132146] pci 0000:00:1d.0: BAR 0 [mem 0xf7223000-0xf72233ff]
[ 0.132227] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.132315] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 conventional PCI endpoint
[ 0.132507] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 conventional PCI endpoint
[ 0.132520] pci 0000:00:1f.2: BAR 0 [io 0xf0b0-0xf0b7]
[ 0.132527] pci 0000:00:1f.2: BAR 1 [io 0xf0a0-0xf0a3]
[ 0.132534] pci 0000:00:1f.2: BAR 2 [io 0xf090-0xf097]
[ 0.132541] pci 0000:00:1f.2: BAR 3 [io 0xf080-0xf083]
[ 0.132549] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f]
[ 0.132556] pci 0000:00:1f.2: BAR 5 [mem 0xf7222000-0xf72227ff]
[ 0.132588] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.132655] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.132673] pci 0000:00:1f.3: BAR 0 [mem 0xf7221000-0xf72210ff 64bit]
[ 0.132691] pci 0000:00:1f.3: BAR 4 [io 0xf040-0xf05f]
[ 0.132776] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 conventional PCI endpoint
[ 0.132801] pci 0000:00:1f.6: BAR 0 [mem 0xf7220000-0xf7220fff 64bit]
[ 0.133026] pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000 PCIe Endpoint
[ 0.133050] pci 0000:01:00.0: BAR 0 [mem 0xf7100000-0xf7100fff]
[ 0.133186] pci 0000:01:00.0: supports D1 D2
[ 0.133189] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.133423] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.133523] pci 0000:02:00.0: [8086:2526] type 00 class 0x028000 PCIe Endpoint
[ 0.133559] pci 0000:02:00.0: BAR 0 [mem 0xf7000000-0xf7003fff 64bit]
[ 0.133703] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.133971] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.136459] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.136500] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.136502] ACPI: PCI: Interrupt link LNKB disabled
[ 0.136539] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.136541] ACPI: PCI: Interrupt link LNKC disabled
[ 0.136577] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.136613] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.136615] ACPI: PCI: Interrupt link LNKE disabled
[ 0.136651] ACPI: PCI: Interrupt link LNKF configured for IRQ 3
[ 0.136687] ACPI: PCI: Interrupt link LNKG configured for IRQ 5
[ 0.136723] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.136726] ACPI: PCI: Interrupt link LNKH disabled
[ 0.138770] ACPI: EC: interrupt unblocked
[ 0.138774] ACPI: EC: event unblocked
[ 0.138778] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.138781] ACPI: EC: GPE=0x27
[ 0.138783] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.138787] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.138894] iommu: Default domain type: Translated
[ 0.138894] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.190665] pps_core: LinuxPPS API ver. 1 registered
[ 0.190670] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.190676] PTP clock support registered
[ 0.190687] EDAC MC: Ver: 3.0.0
[ 0.190763] efivars: Registered efivars operations
[ 0.190763] NetLabel: Initializing
[ 0.190763] NetLabel: domain hash size = 128
[ 0.190763] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.190763] NetLabel: unlabeled traffic allowed by default
[ 0.190763] PCI: Using ACPI for IRQ routing
[ 0.191593] PCI: pci_cache_line_size set to 64 bytes
[ 0.191652] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.191654] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.191655] e820: reserve RAM buffer [mem 0xc4385018-0xc7ffffff]
[ 0.191656] e820: reserve RAM buffer [mem 0xc7d98000-0xc7ffffff]
[ 0.191658] e820: reserve RAM buffer [mem 0xcdce9000-0xcfffffff]
[ 0.191659] e820: reserve RAM buffer [mem 0xdadd0000-0xdbffffff]
[ 0.191660] e820: reserve RAM buffer [mem 0xdbb00000-0xdbffffff]
[ 0.191661] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
[ 0.191706] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.191706] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.191706] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.191706] vgaarb: loaded
[ 0.191706] clocksource: Switched to clocksource tsc-early
[ 0.191706] VFS: Disk quotas dquot_6.6.0
[ 0.191706] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.191706] AppArmor: AppArmor Filesystem Enabled
[ 0.191706] pnp: PnP ACPI init
[ 0.191706] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.191706] system 00:00: [io 0xffff] has been reserved
[ 0.191706] system 00:00: [io 0xffff] has been reserved
[ 0.191706] system 00:00: [io 0xffff] has been reserved
[ 0.191706] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.191706] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.191706] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.191706] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.191706] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.191706] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.191706] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.191706] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.191706] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.191706] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.191706] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.191706] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.191706] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.191706] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.191706] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.191706] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.191706] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.191706] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.193294] pnp: PnP ACPI: found 7 devices
[ 0.198986] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.199055] NET: Registered PF_INET protocol family
[ 0.199171] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.200882] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.200920] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.200973] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.201216] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.201521] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.201603] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.201639] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.201667] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.201716] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.201724] NET: Registered PF_XDP protocol family
[ 0.201752] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.201760] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.201768] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.201773] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.201781] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.201784] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.201787] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.201790] pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff window]
[ 0.201793] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.201796] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.225826] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23158 usecs
[ 0.225866] PCI: CLS 64 bytes, default 64
[ 0.225877] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[ 0.225888] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.225890] software IO TLB: mapped [mem 0x00000000bc8e4000-0x00000000c08e4000] (64MB)
[ 0.225928] Unpacking initramfs...
[ 0.226264] Initialise system trusted keyrings
[ 0.226274] Key type blacklist registered
[ 0.226329] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.226346] zbud: loaded
[ 0.226462] fuse: init (API version 7.39)
[ 0.226631] integrity: Platform Keyring initialized
[ 0.226639] integrity: Machine keyring initialized
[ 0.251260] Key type asymmetric registered
[ 0.251269] Asymmetric key parser 'x509' registered
[ 0.329862] Freeing initrd memory: 34496K
[ 0.334578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.334615] io scheduler mq-deadline registered
[ 0.335599] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[ 0.335778] pcieport 0000:00:1c.3: PME: Signaling with IRQ 43
[ 0.335850] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.337090] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.337095] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.340587] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.340595] ACPI: thermal: Thermal Zone [TZ00] (61 C)
[ 0.343911] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.343916] ACPI: thermal: Thermal Zone [TZ01] (61 C)
[ 0.344147] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.344797] hpet_acpi_add: no address or irqs in _CRS
[ 0.344819] Linux agpgart interface v0.103
[ 0.345147] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.345506] i8042: Warning: Keylock active
[ 0.347696] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.347703] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.347828] mousedev: PS/2 mouse device common for all mice
[ 0.347856] rtc_cmos 00:01: RTC can wake from S4
[ 0.348114] rtc_cmos 00:01: registered as rtc0
[ 0.348153] rtc_cmos 00:01: setting system clock to 2024-02-04T05:37:02 UTC (1707025022)
[ 0.348180] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.348279] intel_pstate: Intel P-state driver initializing
[ 0.348578] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.348845] efifb: probing for efifb
[ 0.348857] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
[ 0.348860] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.348863] efifb: scrolling: redraw
[ 0.348865] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.349197] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.350588] Console: switching to colour frame buffer device 240x67
[ 0.352195] fb0: EFI VGA frame buffer device
[ 0.352363] NET: Registered PF_INET6 protocol family
[ 0.357119] Segment Routing with IPv6
[ 0.357143] In-situ OAM (IOAM) with IPv6
[ 0.357173] mip6: Mobile IPv6
[ 0.357184] NET: Registered PF_PACKET protocol family
[ 0.357277] mpls_gso: MPLS GSO support
[ 0.357534] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.357586] microcode: Current revision: 0x0000002f
[ 0.357596] microcode: Updated early from: 0x0000002b
[ 0.357664] IPI shorthand broadcast: enabled
[ 0.358781] sched_clock: Marking stable (356004978, 1729638)->(394299224, -36564608)
[ 0.358953] registered taskstats version 1
[ 0.358992] Loading compiled-in X.509 certificates
[ 0.378501] Loaded X.509 cert 'Build time autogenerated kernel key: 3b77e94d24cb77d7330e7294e7852aab041f1cec'
[ 0.380278] Key type .fscrypt registered
[ 0.380288] Key type fscrypt-provisioning registered
[ 0.395840] Key type encrypted registered
[ 0.395861] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.396110] integrity: Loading X.509 certificate: UEFI:db
[ 0.396152] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.396170] integrity: Loading X.509 certificate: UEFI:db
[ 0.396202] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.396557] ima: No TPM chip found, activating TPM-bypass!
[ 0.396569] ima: Allocated hash algorithm: sha256
[ 0.396586] ima: No architecture policies found
[ 0.396608] evm: Initialising EVM extended attributes:
[ 0.396618] evm: security.selinux
[ 0.396625] evm: security.SMACK64 (disabled)
[ 0.396634] evm: security.SMACK64EXEC (disabled)
[ 0.396642] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.396651] evm: security.SMACK64MMAP (disabled)
[ 0.396660] evm: security.apparmor
[ 0.396667] evm: security.ima
[ 0.396674] evm: security.capability
[ 0.396681] evm: HMAC attrs: 0x1
[ 0.523925] RAS: Correctable Errors collector initialized.
[ 0.523977] clk: Disabling unused clocks
[ 0.524959] Freeing unused decrypted memory: 2036K
[ 0.525559] Freeing unused kernel image (initmem) memory: 3968K
[ 0.545788] Write protecting the kernel read-only data: 20480k
[ 0.546571] Freeing unused kernel image (rodata/data gap) memory: 312K
[ 0.609536] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.609979] x86/mm: Checking user space page tables
[ 0.659703] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.660143] Run /init as init process
[ 0.660578] with arguments:
[ 0.660580] /init
[ 0.660581] with environment:
[ 0.660581] HOME=/
[ 0.660582] TERM=linux
[ 0.810283] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 0.880237] ACPI: bus type drm_connector registered
[ 0.884134] SCSI subsystem initialized
[ 0.909861] libata version 3.00 loaded.
[ 0.915298] ahci 0000:00:1f.2: version 3.0
[ 0.915486] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.926040] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
[ 0.926529] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.927443] scsi host0: ahci
[ 0.928228] scsi host1: ahci
[ 0.928949] scsi host2: ahci
[ 0.929667] scsi host3: ahci
[ 0.930302] ata1: DUMMY
[ 0.930875] ata2: DUMMY
[ 0.931319] ata3: DUMMY
[ 0.931757] ata4: SATA max UDMA/133 abar m2048@0xf7222000 port 0xf7222280 irq 44 lpm-pol 3
[ 1.244233] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.247531] ata4.00: ATA-9: LITEON L8H-256V2G-11 M.2 2280 256GB, F88110A, max UDMA/133
[ 1.248019] ata4.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 32), AA
[ 1.248848] ata4.00: Features: Dev-Sleep
[ 1.249800] ata4.00: configured for UDMA/133
[ 1.250439] scsi 3:0:0:0: Direct-Access ATA LITEON L8H-256V2 10A PQ: 0 ANSI: 5
[ 1.454644] tsc: Refined TSC clocksource calibration: 2194.919 MHz
[ 1.455458] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa372fc492, max_idle_ns: 440795285018 ns
[ 1.456319] clocksource: Switched to clocksource tsc
[ 1.465896] Console: switching to colour dummy device 80x25
[ 1.465946] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.466058] [drm] ACPI BIOS requests an excessive sleep of 25000 ms, using 1500 ms instead
[ 1.467178] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.483741] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.483778] sd 3:0:0:0: [sda] Write Protect is off
[ 1.483785] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.483815] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.483836] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.491448] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.491729] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.775815] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 1.802497] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 1.802506] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 1.855404] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800/0x0, board id: 3038, fw id: 1832324
[ 1.888522] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.929621] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[ 1.932744] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.934356] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.934554] i915 display info: display version: 8
[ 1.934557] i915 display info: cursor_needs_physical: no
[ 1.934559] i915 display info: has_cdclk_crawl: no
[ 1.934561] i915 display info: has_cdclk_squash: no
[ 1.934563] i915 display info: has_ddi: yes
[ 1.934564] i915 display info: has_dp_mst: yes
[ 1.934566] i915 display info: has_dsb: no
[ 1.934567] i915 display info: has_fpga_dbg: yes
[ 1.934569] i915 display info: has_gmch: no
[ 1.934570] i915 display info: has_hotplug: yes
[ 1.934572] i915 display info: has_hti: no
[ 1.934573] i915 display info: has_ipc: no
[ 1.934574] i915 display info: has_overlay: no
[ 1.934576] i915 display info: has_psr: yes
[ 1.934577] i915 display info: has_psr_hw_tracking: yes
[ 1.934579] i915 display info: overlay_needs_physical: no
[ 1.934580] i915 display info: supports_tv: no
[ 1.934582] i915 display info: has_hdcp: no
[ 1.934583] i915 display info: has_dmc: no
[ 1.934585] i915 display info: has_dsc: no
[ 1.937373] fbcon: i915drmfb (fb0) is primary device
[ 3.047804] Console: switching to colour frame buffer device 240x67
[ 3.069229] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 3.320262] PM: Image not found (code -22)
[ 3.417714] EXT4-fs (sda6): mounted filesystem f88efbd2-19f5-4f2f-a8ce-6c1e1255119b ro with ordered data mode. Quota mode: none.
[ 3.460478] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.579670] systemd[1]: Inserted module 'autofs4'
[ 3.611789] systemd[1]: systemd 255.3-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 3.612812] systemd[1]: Detected architecture x86-64.
[ 3.616486] systemd[1]: Hostname set to <zx>.
[ 3.898134] systemd[1]: Queued start job for default target graphical.target.
[ 3.923038] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 3.924088] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 3.925330] systemd[1]: Created slice system-postfix.slice - Slice /system/postfix.
[ 3.927144] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 3.928444] systemd[1]: Created slice user.slice - User and Session Slice.
[ 3.929437] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ 3.929516] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 3.931045] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 3.932154] systemd[1]: Expecting device dev-disk-by\x2duuid-5A2C\x2d588C.device - /dev/disk/by-uuid/5A2C-588C...
[ 3.933497] systemd[1]: Expecting device dev-disk-by\x2duuid-ebb97d51\x2d9fa7\x2d4bc0\x2db802\x2d4f5c51cdf061.device - /dev/disk/by-uuid/ebb97d51-9fa7-4bc0-b802-4f5c51cdf061...
[ 3.934274] systemd[1]: Expecting device dev-disk-by\x2duuid-ec560b1b\x2ddcef\x2d4510\x2db87f\x2d6ff7e7efa8ed.device - /dev/disk/by-uuid/ec560b1b-dcef-4510-b87f-6ff7e7efa8ed...
[ 3.935786] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 3.937361] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 3.938169] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 3.939563] systemd[1]: Reached target paths.target - Path Units.
[ 3.940312] systemd[1]: Reached target slices.target - Slice Units.
[ 3.941738] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 3.947038] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[ 3.948080] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 3.950311] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 3.951816] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 3.953473] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 3.955172] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 3.956701] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.957060] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 3.959409] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 3.962358] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 3.965224] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 3.970093] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 3.977277] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 3.984708] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 3.989349] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 3.992844] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 3.996419] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 4.002056] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 4.008689] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 4.020713] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 4.023423] pstore: Using crash dump compression: deflate
[ 4.027310] pstore: Registered efi_pstore as persistent store backend
[ 4.028347] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 4.035041] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 4.041202] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 4.049646] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 4.049723] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 4.049787] device-mapper: uevent: version 1.0.3
[ 4.049927] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 4.051388] loop: module loaded
[ 4.056912] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 4.058502] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 4.060547] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 4.070055] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 4.075603] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 4.080860] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 4.084250] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 4.087906] lp: driver loaded but no devices found
[ 4.093462] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 4.095558] ppdev: user-space parallel port driver
[ 4.096303] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 4.096975] systemd-journald[326]: Collecting audit messages is disabled.
[ 4.103167] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4.103405] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 4.111170] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 4.111402] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 4.113763] EXT4-fs (sda6): re-mounted f88efbd2-19f5-4f2f-a8ce-6c1e1255119b r/w. Quota mode: none.
[ 4.123520] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.123751] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 4.128234] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 4.128452] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 4.138259] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 4.138484] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 4.143875] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 4.145582] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 4.150130] systemd[1]: Started systemd-journald.service - Journal Service.
[ 4.241153] systemd-journald[326]: Received client request to flush runtime journal.
[ 4.262130] systemd-journald[326]: /var/log/journal/ea69907a8a964ca4a69c2618bc01f315/system.journal: Journal file uses a different sequence number ID, rotating.
[ 4.262138] systemd-journald[326]: Rotating system journal.
[ 4.567962] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 4.591757] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 4.593703] ACPI: AC: AC Adapter [AC] (on-line)
[ 4.598526] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20230628/nspredef-260)
[ 4.599810] _ART package 0 is invalid, ignored
[ 4.600690] Consider using thermal netlink events interface
[ 4.612398] hid: raw HID events driver (C) Jiri Kosina
[ 4.621031] ACPI: button: Lid Switch [LID0]
[ 4.629127] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 4.645829] ACPI: button: Power Button [PBTN]
[ 4.646013] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 4.653860] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 4.666068] ACPI: button: Sleep Button [SBTN]
[ 4.671575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 4.680108] ACPI: button: Power Button [PWRF]
[ 4.765366] intel_pch_thermal 0000:00:1f.6: enabling device (0000 -> 0002)
[ 4.770325] ACPI: battery: Slot [BAT0] (battery present)
[ 4.795729] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 4.811113] ACPI: bus type USB registered
[ 4.811171] usbcore: registered new interface driver usbfs
[ 4.811187] usbcore: registered new interface driver hub
[ 4.811212] usbcore: registered new device driver usb
[ 4.817715] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 4.828463] Adding 8388604k swap on /dev/sda8. Priority:-2 extents:1 across:8388604k SS
[ 4.850427] EXT4-fs (sda7): mounted filesystem ec560b1b-dcef-4510-b87f-6ff7e7efa8ed r/w with ordered data mode. Quota mode: none.
[ 4.861121] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 5.033551] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.035286] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.036929] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 5.038619] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 5.038653] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.042326] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 5.071482] i2c i2c-8: 2/2 memory slots populated (from DMI)
[ 5.089259] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.092888] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.106323] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 5.115679] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 5.133002] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 5.153269] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 5.153279] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.153293] ehci-pci 0000:00:1d.0: debug port 2
[ 5.153309] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.153313] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 5.153318] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 5.153394] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 5.153398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.153400] usb usb1: Product: xHCI Host Controller
[ 5.153401] usb usb1: Manufacturer: Linux 6.8.0-rc2-xps13-9343_2 xhci-hcd
[ 5.153403] usb usb1: SerialNumber: 0000:00:14.0
[ 5.155291] hub 1-0:1.0: USB hub found
[ 5.155308] hub 1-0:1.0: 11 ports detected
[ 5.157223] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7223000
[ 5.170890] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 5.192804] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 5.192809] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.192812] usb usb3: Product: xHCI Host Controller
[ 5.192814] usb usb3: Manufacturer: Linux 6.8.0-rc2-xps13-9343_2 xhci-hcd
[ 5.192815] usb usb3: SerialNumber: 0000:00:14.0
[ 5.193829] Intel(R) Wireless WiFi driver for Linux
[ 5.199022] hub 3-0:1.0: USB hub found
[ 5.203593] hub 3-0:1.0: 4 ports detected
[ 5.210631] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 5.212853] iwlwifi 0000:02:00.0: Detected crf-id 0x2816, cnv-id 0x1000200 wfpm id 0x80000000
[ 5.212871] iwlwifi 0000:02:00.0: PCI dev 2526/0010, rev=0x321, rfid=0x105110
[ 5.216352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 5.217438] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.217441] usb usb2: Product: EHCI Host Controller
[ 5.217442] usb usb2: Manufacturer: Linux 6.8.0-rc2-xps13-9343_2 ehci_hcd
[ 5.217444] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.217608] hub 2-0:1.0: USB hub found
[ 5.217618] hub 2-0:1.0: 2 ports detected
[ 5.224048] iTCO_vendor_support: vendor-support=0
[ 5.239102] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 5.239106] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.239108] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.239109] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.239110] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.239536] iwlwifi 0000:02:00.0: loaded firmware version 46.ff18e32a.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[ 5.240550] input: DLL0665:01 06CB:76AD Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input10
[ 5.242811] iTCO_wdt iTCO_wdt.1.auto: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 5.256564] intel_rapl_common: Found RAPL domain package
[ 5.256568] intel_rapl_common: Found RAPL domain core
[ 5.256569] intel_rapl_common: Found RAPL domain uncore
[ 5.256574] intel_rapl_common: Found RAPL domain dram
[ 5.256581] intel_rapl_common: package-0:package:long_term locked by BIOS
[ 5.256584] intel_rapl_common: package-0:package:short_term locked by BIOS
[ 5.264308] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 5.265979] input: DLL0665:01 06CB:76AD Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input11
[ 5.285225] cryptd: max_cpu_qlen set to 1000
[ 5.304523] hid-generic 0018:06CB:76AD.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0665:01 06CB:76AD] on i2c-DLL0665:01
[ 5.434310] AVX2 version of gcm_enc/dec engaged.
[ 5.434352] AES CTR mode by8 optimization enabled
[ 5.434808] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 5.435003] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.437346] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 5.450090] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 5.459715] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 5.485768] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 5.505359] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3263: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5.505366] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.505369] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 5.505372] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 5.505373] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 5.505376] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x18
[ 5.505378] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
[ 5.505380] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 5.514464] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 5.514545] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 5.558621] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x321
[ 5.558808] thermal thermal_zone11: failed to read out thermal zone (-61)
[ 5.590769] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 5.591853] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 5.598961] usb 1-3: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
[ 5.598968] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.611365] input: DLL0665:01 06CB:76AD Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input18
[ 5.611419] iwlwifi 0000:02:00.0: base HW address: 64:6e:e0:e7:81:4b, OTP minor version: 0x4
[ 5.649875] input: DLL0665:01 06CB:76AD Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input19
[ 5.651158] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 5.652267] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.653710] hid-multitouch 0018:06CB:76AD.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0665:01 06CB:76AD] on i2c-DLL0665:01
[ 5.655055] hub 2-1:1.0: USB hub found
[ 5.656403] hub 2-1:1.0: 8 ports detected
[ 5.677849] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 5.677974] iwlwifi 0000:02:00.0: WBRF is not supported
[ 5.699107] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.753755] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 5.948826] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682, bcdDevice=48.14
[ 5.948832] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.948835] usb 1-5: Product: Integrated_Webcam_HD
[ 5.948837] usb 1-5: Manufacturer: CKFEH41F301030020790
[ 5.948838] usb 1-5: SerialNumber: 200901010001
[ 6.604203] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 7.168042] mc: Linux media interface: v0.10
[ 7.213636] videodev: Linux video capture interface: v2.00
[ 7.255254] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682)
[ 7.283794] usbcore: registered new interface driver uvcvideo
[ 7.313687] Bluetooth: Core ver 2.22
[ 7.314337] NET: Registered PF_BLUETOOTH protocol family
[ 7.315231] Bluetooth: HCI device and connection manager initialized
[ 7.315823] Bluetooth: HCI socket layer initialized
[ 7.316396] Bluetooth: L2CAP socket layer initialized
[ 7.316980] Bluetooth: SCO socket layer initialized
[ 7.340570] usbcore: registered new interface driver btusb
[ 7.353685] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 7.354805] Bluetooth: hci0: Boot Address: 0x40800
[ 7.355794] Bluetooth: hci0: Firmware Version: 155-35.23
[ 7.356778] Bluetooth: hci0: Firmware already loaded
[ 7.359935] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 7.433652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.434251] Bluetooth: BNEP filters: protocol multicast
[ 7.434815] Bluetooth: BNEP socket layer initialized
[ 7.439392] Bluetooth: MGMT ver 1.22
[ 7.447718] NET: Registered PF_ALG protocol family
[ 8.327861] Bluetooth: RFCOMM TTY layer initialized
[ 8.327873] Bluetooth: RFCOMM socket layer initialized
[ 8.327880] Bluetooth: RFCOMM ver 1.11
[ 10.136289] rfkill: input handler disabled
[ 10.452503] wlp2s0: 80 MHz not supported, disabling VHT
[ 10.457335] wlp2s0: authenticate with 44:ce:7d:49:33:dc (local address=64:6e:e0:e7:81:4b)
[ 10.458499] wlp2s0: send auth to 44:ce:7d:49:33:dc (try 1/3)
[ 10.497646] wlp2s0: authenticated
[ 10.501824] wlp2s0: associate with 44:ce:7d:49:33:dc (try 1/3)
[ 10.505464] wlp2s0: RX AssocResp from 44:ce:7d:49:33:dc (capab=0x411 status=0 aid=5)
[ 10.508817] wlp2s0: associated
[ 10.578865] iwlwifi 0000:02:00.0: Unhandled alg: 0xc0400707
[ 16.561605] systemd-journald[326]: /var/log/journal/ea69907a8a964ca4a69c2618bc01f315/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ 17.038414] rfkill: input handler enabled
[ 19.304591] warning: `gnome-shell' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 20.355648] rfkill: input handler disabled
[ 415.715455] wlp2s0: deauthenticating from 44:ce:7d:49:33:dc by local choice (Reason: 3=DEAUTH_LEAVING)
[ 420.782178] PM: suspend entry (deep)
[ 420.793666] Filesystems sync: 0.011 seconds
[ 420.803483] Freezing user space processes
[ 420.805134] Freezing user space processes completed (elapsed 0.001 seconds)
[ 420.805140] OOM killer disabled.
[ 420.805141] Freezing remaining freezable tasks
[ 420.806325] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 420.806359] printk: Suspending console(s) (use no_console_suspend to debug)
[ 420.829074] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[ 420.829170] ata4.00: Entering standby power mode
[ 421.009166] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 421.659885] ACPI: EC: interrupt blocked
[ 421.733089] ACPI: PM: Preparing to enter system sleep state S3
[ 421.735353] ACPI: EC: event blocked
[ 421.735354] ACPI: EC: EC stopped
[ 421.735354] ACPI: PM: Saving platform NVS memory
[ 421.735450] Disabling non-boot CPUs ...
[ 421.736771] smpboot: CPU 1 is now offline
[ 421.738403] smpboot: CPU 2 is now offline
[ 421.740367] smpboot: CPU 3 is now offline
[ 421.743756] ACPI: PM: Low-level resume complete
[ 421.743782] ACPI: EC: EC started
[ 421.743782] ACPI: PM: Restoring platform NVS memory
[ 421.744162] Enabling non-boot CPUs ...
[ 421.744213] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 421.747823] CPU1 is up
[ 421.747849] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 421.748572] CPU2 is up
[ 421.748589] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 421.749316] CPU3 is up
[ 421.751037] ACPI: PM: Waking up from system sleep state S3
[ 421.790860] ACPI: EC: interrupt unblocked
[ 421.856498] ACPI: EC: event unblocked
[ 422.076263] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 422.124571] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 422.171678] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 422.175721] ata4.00: configured for UDMA/133
[ 422.236695] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 422.400562] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 422.550240] OOM killer enabled.
[ 422.550244] Restarting tasks ...
[ 422.550364] pci_bus 0000:01: Allocating resources
[ 422.550378] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 422.550385] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 422.550395] pci_bus 0000:02: Allocating resources
[ 422.550410] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 422.550415] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 422.550426] pcieport 0000:00:1c.0: bridge window [mem 0xdf800000-0xdf9fffff 64bit pref]: assigned
[ 422.550431] pcieport 0000:00:1c.3: bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref]: assigned
[ 422.550436] pcieport 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
[ 422.550441] pcieport 0000:00:1c.3: bridge window [io 0x3000-0x3fff]: assigned
[ 422.551001] pci_bus 0000:01: Allocating resources
[ 422.551015] pci_bus 0000:02: Allocating resources
[ 422.552109] pci_bus 0000:01: Allocating resources
[ 422.552132] pci_bus 0000:02: Allocating resources
[ 422.559339] done.
[ 422.559355] random: crng reseeded on system resumption
[ 422.618255] PM: suspend exit
[ 422.620186] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 422.621042] Bluetooth: hci0: Device revision is 2
[ 422.621049] Bluetooth: hci0: Secure boot is enabled
[ 422.621052] Bluetooth: hci0: OTP lock is enabled
[ 422.621054] Bluetooth: hci0: API lock is enabled
[ 422.621056] Bluetooth: hci0: Debug lock is disabled
[ 422.621058] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 422.626545] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 422.626648] Bluetooth: hci0: Boot Address: 0x40800
[ 422.626652] Bluetooth: hci0: Firmware Version: 155-35.23
[ 424.048237] Bluetooth: hci0: Waiting for firmware download to complete
[ 424.049036] Bluetooth: hci0: Firmware loaded in 1389156 usecs
[ 424.049065] Bluetooth: hci0: Waiting for device to boot
[ 424.063084] Bluetooth: hci0: Device booted in 13712 usecs
[ 424.069114] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[ 424.071132] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 424.072110] Bluetooth: hci0: Firmware revision 0.1 build 155 week 35 2023
[ 424.074205] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 424.130620] Bluetooth: MGMT ver 1.22
[ 427.132151] wlp2s0: 80 MHz not supported, disabling VHT
[ 427.137986] wlp2s0: authenticate with 44:ce:7d:49:33:dc (local address=64:6e:e0:e7:81:4b)
[ 427.139126] wlp2s0: send auth to 44:ce:7d:49:33:dc (try 1/3)
[ 427.178450] wlp2s0: authenticated
[ 427.184240] wlp2s0: associate with 44:ce:7d:49:33:dc (try 1/3)
[ 427.189736] wlp2s0: RX AssocResp from 44:ce:7d:49:33:dc (capab=0x411 status=0 aid=5)
[ 427.193783] wlp2s0: associated
[ 427.260392] iwlwifi 0000:02:00.0: Unhandled alg: 0xc0400707
[ 7041.960263] wlp2s0: deauthenticating from 44:ce:7d:49:33:dc by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7047.033778] PM: suspend entry (deep)
[ 7047.044806] Filesystems sync: 0.011 seconds
[ 7047.168766] Freezing user space processes
[ 7047.177663] Freezing user space processes completed (elapsed 0.008 seconds)
[ 7047.177671] OOM killer disabled.
[ 7047.177672] Freezing remaining freezable tasks
[ 7047.178662] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
[ 7047.178693] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7047.202616] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[ 7047.202805] ata4.00: Entering standby power mode
[ 7047.282907] ACPI: EC: interrupt blocked
[ 7047.306622] ACPI: PM: Preparing to enter system sleep state S3
[ 7047.312162] ACPI: EC: event blocked
[ 7047.312163] ACPI: EC: EC stopped
[ 7047.312163] ACPI: PM: Saving platform NVS memory
[ 7047.312267] Disabling non-boot CPUs ...
[ 7047.313848] smpboot: CPU 1 is now offline
[ 7047.315836] smpboot: CPU 2 is now offline
[ 7047.317733] smpboot: CPU 3 is now offline
[ 7047.321859] ACPI: PM: Low-level resume complete
[ 7047.321886] ACPI: EC: EC started
[ 7047.321887] ACPI: PM: Restoring platform NVS memory
[ 7047.322290] Enabling non-boot CPUs ...
[ 7047.322325] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7047.325941] CPU1 is up
[ 7047.325970] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7047.326685] CPU2 is up
[ 7047.326703] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7047.327337] CPU3 is up
[ 7047.329060] ACPI: PM: Waking up from system sleep state S3
[ 7047.882216] ACPI: EC: interrupt unblocked
[ 7047.950181] ACPI: EC: event unblocked
[ 7048.218114] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 7048.281322] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7048.285233] ata4.00: configured for UDMA/133
[ 7048.498064] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 7048.685662] OOM killer enabled.
[ 7048.685671] Restarting tasks ...
[ 7048.686048] pci_bus 0000:01: Allocating resources
[ 7048.686090] pci_bus 0000:02: Allocating resources
[ 7048.686368] pci_bus 0000:01: Allocating resources
[ 7048.686383] pci_bus 0000:02: Allocating resources
[ 7048.686951] pci_bus 0000:01: Allocating resources
[ 7048.686966] pci_bus 0000:02: Allocating resources
[ 7048.690338] done.
[ 7048.690353] random: crng reseeded on system resumption
[ 7048.735609] PM: suspend exit
[ 7049.107552] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 7049.108550] Bluetooth: hci0: Device revision is 2
[ 7049.108554] Bluetooth: hci0: Secure boot is enabled
[ 7049.108556] Bluetooth: hci0: OTP lock is enabled
[ 7049.108558] Bluetooth: hci0: API lock is enabled
[ 7049.108560] Bluetooth: hci0: Debug lock is disabled
[ 7049.108562] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 7049.156709] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 7049.156804] Bluetooth: hci0: Boot Address: 0x40800
[ 7049.156808] Bluetooth: hci0: Firmware Version: 155-35.23
[ 7050.554250] Bluetooth: hci0: Waiting for firmware download to complete
[ 7050.554565] Bluetooth: hci0: Firmware loaded in 1365084 usecs
[ 7050.554611] Bluetooth: hci0: Waiting for device to boot
[ 7050.568643] Bluetooth: hci0: Device booted in 13718 usecs
[ 7050.568672] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[ 7050.570658] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 7050.571625] Bluetooth: hci0: Firmware revision 0.1 build 155 week 35 2023
[ 7050.573595] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 7050.628912] Bluetooth: MGMT ver 1.22
[ 7053.492804] wlp2s0: 80 MHz not supported, disabling VHT
[ 7053.498657] wlp2s0: authenticate with 44:ce:7d:49:33:dc (local address=64:6e:e0:e7:81:4b)
[ 7053.499779] wlp2s0: send auth to 44:ce:7d:49:33:dc (try 1/3)
[ 7053.539104] wlp2s0: authenticated
[ 7053.541813] wlp2s0: associate with 44:ce:7d:49:33:dc (try 1/3)
[ 7053.545542] wlp2s0: RX AssocResp from 44:ce:7d:49:33:dc (capab=0x411 status=0 aid=7)
[ 7053.562606] wlp2s0: associated
[ 7053.623477] iwlwifi 0000:02:00.0: Unhandled alg: 0xc0400707
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2024-02-04 13:18 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-01-18 12:57 PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Paul Menzel
2024-01-18 21:37 ` Christian A. Ehrhardt
2024-01-20 20:26 ` Hans de Goede
2024-01-21 14:26 ` Paul Menzel
2024-01-21 14:39 ` Hans de Goede
2024-01-22 13:43 ` Hans de Goede
2024-01-26 7:03 ` Paul Menzel
2024-01-26 13:32 ` Hans de Goede
2024-01-26 15:58 ` Hans de Goede
2024-02-03 16:16 ` + XPS 13 9343 Antoine
2024-02-04 7:24 ` Hans de Goede
2024-02-04 13:18 ` Antoine
2024-01-27 8:12 ` PS/2 keyboard of laptop Dell XPS 13 9360 goes missing after S3 Linux regression tracking #update (Thorsten Leemhuis)
2024-02-02 8:05 ` Linux regression tracking #update (Thorsten Leemhuis)
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.