All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: Shawn Lin <shawn.lin@rock-chips.com>,
	Guodong Xu <guodong.xu@linaro.org>,
	heiko@sntech.de, robh+dt@kernel.org, mark.rutland@arm.com,
	ulf.hansson@linaro.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org,
	Xinwei Kong <kong.kongxinwei@hisilicon.com>,
	Zhangfei Gao <zhangfei.gao@linaro.org>
Subject: Re: [PATCH v4 2/2] mmc: dw_mmc: add reset support to dwmmc host controller
Date: Thu, 11 Aug 2016 19:30:25 +0900	[thread overview]
Message-ID: <f2aab41f-26f0-6740-4465-5ac57fdcd72e@samsung.com> (raw)
In-Reply-To: <d39854ef-1a6a-bd58-2500-4db7f62f63c1@rock-chips.com>

Hi Guodong,

On 08/11/2016 11:23 AM, Shawn Lin wrote:
> On 2016/8/10 16:03, Guodong Xu wrote:
>> Dwmmc host controller may in unknown state when entering kernel boot. One
>> example is when booting from eMMC, bootloader need initialize MMC host
>> controller into some state so it can read. In order to make sure MMC host
>> controller in a clean initial state, this reset support is added.
>>
>> With this patch, a 'resets' property can be added into dw_mmc device
>> tree node. The hardware logic is: dwmmc host controller IP receives a reset
>> signal from a 'reset provider' (eg. power management unit). The 'resets'
>> property points to this reset signal. So, during dwmmc driver probe,
>> it can use this signal to reset itself.
>>
>> Refer to [1] for more information.
>>
>> [1] Documentation/devicetree/bindings/reset/reset.txt
>>
>> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> 
> Looks good to me,
> 
> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

Could you rebase on https://github.com/jh80chung/dw-mmc.git?
Otherwise, when i apply your patch, i will rebase.

Best Regards,
Jaehoon Chung

> 
>> ---
>>  drivers/mmc/host/dw_mmc.c  | 23 ++++++++++++++++++++++-
>>  include/linux/mmc/dw_mmc.h |  2 ++
>>  2 files changed, 24 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 32380d5..481d441 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -2915,6 +2915,13 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>>      if (!pdata)
>>          return ERR_PTR(-ENOMEM);
>>
>> +    /* find reset controller when exist */
>> +    pdata->rstc = devm_reset_control_get_optional(dev, NULL);
>> +    if (IS_ERR(pdata->rstc)) {
>> +        if (PTR_ERR(pdata->rstc) == -EPROBE_DEFER)
>> +            return ERR_PTR(-EPROBE_DEFER);
>> +    }
>> +
>>      /* find out number of slots supported */
>>      of_property_read_u32(np, "num-slots", &pdata->num_slots);
>>
>> @@ -2986,7 +2993,9 @@ int dw_mci_probe(struct dw_mci *host)
>>
>>      if (!host->pdata) {
>>          host->pdata = dw_mci_parse_dt(host);
>> -        if (IS_ERR(host->pdata)) {
>> +        if (PTR_ERR(host->pdata) == -EPROBE_DEFER) {
>> +            return -EPROBE_DEFER;
>> +        } else if (IS_ERR(host->pdata)) {
>>              dev_err(host->dev, "platform data not available\n");
>>              return -EINVAL;
>>          }
>> @@ -3040,6 +3049,12 @@ int dw_mci_probe(struct dw_mci *host)
>>          }
>>      }
>>
>> +    if (!IS_ERR(host->pdata->rstc)) {
>> +        reset_control_assert(host->pdata->rstc);
>> +        usleep_range(10, 50);
>> +        reset_control_deassert(host->pdata->rstc);
>> +    }
>> +
>>      setup_timer(&host->cmd11_timer,
>>              dw_mci_cmd11_timer, (unsigned long)host);
>>
>> @@ -3189,6 +3204,9 @@ err_dmaunmap:
>>      if (host->use_dma && host->dma_ops->exit)
>>          host->dma_ops->exit(host);
>>
>> +    if (!IS_ERR(host->pdata->rstc))
>> +        reset_control_assert(host->pdata->rstc);
>> +
>>  err_clk_ciu:
>>      if (!IS_ERR(host->ciu_clk))
>>          clk_disable_unprepare(host->ciu_clk);
>> @@ -3221,6 +3239,9 @@ void dw_mci_remove(struct dw_mci *host)
>>      if (host->use_dma && host->dma_ops->exit)
>>          host->dma_ops->exit(host);
>>
>> +    if (!IS_ERR(host->pdata->rstc))
>> +        reset_control_assert(host->pdata->rstc);
>> +
>>      if (!IS_ERR(host->ciu_clk))
>>          clk_disable_unprepare(host->ciu_clk);
>>
>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
>> index 83b0edfc..f5af2bd 100644
>> --- a/include/linux/mmc/dw_mmc.h
>> +++ b/include/linux/mmc/dw_mmc.h
>> @@ -17,6 +17,7 @@
>>  #include <linux/scatterlist.h>
>>  #include <linux/mmc/core.h>
>>  #include <linux/dmaengine.h>
>> +#include <linux/reset.h>
>>
>>  #define MAX_MCI_SLOTS    2
>>
>> @@ -259,6 +260,7 @@ struct dw_mci_board {
>>      /* delay in mS before detecting cards after interrupt */
>>      u32 detect_delay_ms;
>>
>> +    struct reset_control *rstc;
>>      struct dw_mci_dma_ops *dma_ops;
>>      struct dma_pdata *data;
>>  };
>>
> 
> 

WARNING: multiple messages have this Message-ID (diff)
From: jh80.chung@samsung.com (Jaehoon Chung)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] mmc: dw_mmc: add reset support to dwmmc host controller
Date: Thu, 11 Aug 2016 19:30:25 +0900	[thread overview]
Message-ID: <f2aab41f-26f0-6740-4465-5ac57fdcd72e@samsung.com> (raw)
In-Reply-To: <d39854ef-1a6a-bd58-2500-4db7f62f63c1@rock-chips.com>

Hi Guodong,

On 08/11/2016 11:23 AM, Shawn Lin wrote:
> On 2016/8/10 16:03, Guodong Xu wrote:
>> Dwmmc host controller may in unknown state when entering kernel boot. One
>> example is when booting from eMMC, bootloader need initialize MMC host
>> controller into some state so it can read. In order to make sure MMC host
>> controller in a clean initial state, this reset support is added.
>>
>> With this patch, a 'resets' property can be added into dw_mmc device
>> tree node. The hardware logic is: dwmmc host controller IP receives a reset
>> signal from a 'reset provider' (eg. power management unit). The 'resets'
>> property points to this reset signal. So, during dwmmc driver probe,
>> it can use this signal to reset itself.
>>
>> Refer to [1] for more information.
>>
>> [1] Documentation/devicetree/bindings/reset/reset.txt
>>
>> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> 
> Looks good to me,
> 
> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

Could you rebase on https://github.com/jh80chung/dw-mmc.git?
Otherwise, when i apply your patch, i will rebase.

Best Regards,
Jaehoon Chung

> 
>> ---
>>  drivers/mmc/host/dw_mmc.c  | 23 ++++++++++++++++++++++-
>>  include/linux/mmc/dw_mmc.h |  2 ++
>>  2 files changed, 24 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 32380d5..481d441 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -2915,6 +2915,13 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>>      if (!pdata)
>>          return ERR_PTR(-ENOMEM);
>>
>> +    /* find reset controller when exist */
>> +    pdata->rstc = devm_reset_control_get_optional(dev, NULL);
>> +    if (IS_ERR(pdata->rstc)) {
>> +        if (PTR_ERR(pdata->rstc) == -EPROBE_DEFER)
>> +            return ERR_PTR(-EPROBE_DEFER);
>> +    }
>> +
>>      /* find out number of slots supported */
>>      of_property_read_u32(np, "num-slots", &pdata->num_slots);
>>
>> @@ -2986,7 +2993,9 @@ int dw_mci_probe(struct dw_mci *host)
>>
>>      if (!host->pdata) {
>>          host->pdata = dw_mci_parse_dt(host);
>> -        if (IS_ERR(host->pdata)) {
>> +        if (PTR_ERR(host->pdata) == -EPROBE_DEFER) {
>> +            return -EPROBE_DEFER;
>> +        } else if (IS_ERR(host->pdata)) {
>>              dev_err(host->dev, "platform data not available\n");
>>              return -EINVAL;
>>          }
>> @@ -3040,6 +3049,12 @@ int dw_mci_probe(struct dw_mci *host)
>>          }
>>      }
>>
>> +    if (!IS_ERR(host->pdata->rstc)) {
>> +        reset_control_assert(host->pdata->rstc);
>> +        usleep_range(10, 50);
>> +        reset_control_deassert(host->pdata->rstc);
>> +    }
>> +
>>      setup_timer(&host->cmd11_timer,
>>              dw_mci_cmd11_timer, (unsigned long)host);
>>
>> @@ -3189,6 +3204,9 @@ err_dmaunmap:
>>      if (host->use_dma && host->dma_ops->exit)
>>          host->dma_ops->exit(host);
>>
>> +    if (!IS_ERR(host->pdata->rstc))
>> +        reset_control_assert(host->pdata->rstc);
>> +
>>  err_clk_ciu:
>>      if (!IS_ERR(host->ciu_clk))
>>          clk_disable_unprepare(host->ciu_clk);
>> @@ -3221,6 +3239,9 @@ void dw_mci_remove(struct dw_mci *host)
>>      if (host->use_dma && host->dma_ops->exit)
>>          host->dma_ops->exit(host);
>>
>> +    if (!IS_ERR(host->pdata->rstc))
>> +        reset_control_assert(host->pdata->rstc);
>> +
>>      if (!IS_ERR(host->ciu_clk))
>>          clk_disable_unprepare(host->ciu_clk);
>>
>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
>> index 83b0edfc..f5af2bd 100644
>> --- a/include/linux/mmc/dw_mmc.h
>> +++ b/include/linux/mmc/dw_mmc.h
>> @@ -17,6 +17,7 @@
>>  #include <linux/scatterlist.h>
>>  #include <linux/mmc/core.h>
>>  #include <linux/dmaengine.h>
>> +#include <linux/reset.h>
>>
>>  #define MAX_MCI_SLOTS    2
>>
>> @@ -259,6 +260,7 @@ struct dw_mci_board {
>>      /* delay in mS before detecting cards after interrupt */
>>      u32 detect_delay_ms;
>>
>> +    struct reset_control *rstc;
>>      struct dw_mci_dma_ops *dma_ops;
>>      struct dma_pdata *data;
>>  };
>>
> 
> 

  reply	other threads:[~2016-08-11 10:30 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-10  8:03 [PATCH v4 0/2] mmc: dw_mmc: host controller reset support Guodong Xu
2016-08-10  8:03 ` Guodong Xu
2016-08-10  8:03 ` Guodong Xu
2016-08-10  8:03 ` [PATCH v4 1/2] Documentation: synopsys-dw-mshc: add binding for resets Guodong Xu
2016-08-10  8:03   ` Guodong Xu
2016-08-10  8:03   ` Guodong Xu
2016-08-11  2:18   ` Shawn Lin
2016-08-11  2:18     ` Shawn Lin
2016-08-11  2:18     ` Shawn Lin
2016-08-10  8:03 ` [PATCH v4 2/2] mmc: dw_mmc: add reset support to dwmmc host controller Guodong Xu
2016-08-10  8:03   ` Guodong Xu
2016-08-10  8:03   ` Guodong Xu
2016-08-11  2:23   ` Shawn Lin
2016-08-11  2:23     ` Shawn Lin
2016-08-11  2:23     ` Shawn Lin
2016-08-11 10:30     ` Jaehoon Chung [this message]
2016-08-11 10:30       ` Jaehoon Chung
2016-08-12  8:53       ` Guodong Xu
2016-08-12  8:53         ` Guodong Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f2aab41f-26f0-6740-4465-5ac57fdcd72e@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=guodong.xu@linaro.org \
    --cc=heiko@sntech.de \
    --cc=kong.kongxinwei@hisilicon.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=ulf.hansson@linaro.org \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.